mirrors/qemu
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
ec7a8bf0b8
qemu/block/qcow2-cluster.c
Eric Blake 237d78f8fc block: Convert bdrv_get_block_status() to bytes 
We are gradually moving away from sector-based interfaces, towards
byte-based.  In the common case, allocation is unlikely to ever use
values that are not naturally sector-aligned, but it is possible
that byte-based values will let us be more precise about allocation
at the end of an unaligned file that can do byte-based access.

Changing the name of the function from bdrv_get_block_status() to
bdrv_block_status() ensures that the compiler enforces that all
callers are updated.  For now, the io.c layer still assert()s that
all callers are sector-aligned, but that can be relaxed when a later
patch implements byte-based block status in the drivers.

There was an inherent limitation in returning the offset via the
return value: we only have room for BDRV_BLOCK_OFFSET_MASK bits, which
means an offset can only be mapped for sector-aligned queries (or,
if we declare that non-aligned input is at the same relative position
modulo 512 of the answer), so the new interface also changes things to
return the offset via output through a parameter by reference rather
than mashed into the return value.  We'll have some glue code that
munges between the two styles until we finish converting all uses.

For the most part this patch is just the addition of scaling at the
callers followed by inverse scaling at bdrv_block_status(), coupled
with the tweak in calling convention.  But some code, particularly
bdrv_is_allocated(), gets a lot simpler because it no longer has to
mess with sectors.

For ease of review, bdrv_get_block_status_above() will be tackled
separately.

Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2017-10-26 14:45:57 +02:00

2082 lines
67 KiB
C
Raw Blame History

/*
* Block driver for the QCOW version 2 format
*
* Copyright (c) 2004-2006 Fabrice Bellard
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#include "qemu/osdep.h"
#include <zlib.h>
#include "qapi/error.h"
#include "qemu-common.h"
#include "block/block_int.h"
#include "block/qcow2.h"
#include "qemu/bswap.h"
#include "trace.h"
int qcow2_shrink_l1_table(BlockDriverState *bs, uint64_t exact_size)
{
BDRVQcow2State *s = bs->opaque;
int new_l1_size, i, ret;
if (exact_size >= s->l1_size) {
return 0;
}
new_l1_size = exact_size;
#ifdef DEBUG_ALLOC2
fprintf(stderr, "shrink l1_table from %d to %d\n", s->l1_size, new_l1_size);
#endif
BLKDBG_EVENT(bs->file, BLKDBG_L1_SHRINK_WRITE_TABLE);
ret = bdrv_pwrite_zeroes(bs->file, s->l1_table_offset +
new_l1_size * sizeof(uint64_t),
(s->l1_size - new_l1_size) * sizeof(uint64_t), 0);
if (ret < 0) {
goto fail;
}
ret = bdrv_flush(bs->file->bs);
if (ret < 0) {
goto fail;
}
BLKDBG_EVENT(bs->file, BLKDBG_L1_SHRINK_FREE_L2_CLUSTERS);
for (i = s->l1_size - 1; i > new_l1_size - 1; i--) {
if ((s->l1_table[i] & L1E_OFFSET_MASK) == 0) {
continue;
}
qcow2_free_clusters(bs, s->l1_table[i] & L1E_OFFSET_MASK,
s->cluster_size, QCOW2_DISCARD_ALWAYS);
s->l1_table[i] = 0;
}
return 0;
fail:
/*
* If the write in the l1_table failed the image may contain a partially
* overwritten l1_table. In this case it would be better to clear the
* l1_table in memory to avoid possible image corruption.
*/
memset(s->l1_table + new_l1_size, 0,
(s->l1_size - new_l1_size) * sizeof(uint64_t));
return ret;
}
int qcow2_grow_l1_table(BlockDriverState *bs, uint64_t min_size,
bool exact_size)
{
BDRVQcow2State *s = bs->opaque;
int new_l1_size2, ret, i;
uint64_t *new_l1_table;
int64_t old_l1_table_offset, old_l1_size;
int64_t new_l1_table_offset, new_l1_size;
uint8_t data[12];
if (min_size <= s->l1_size)
return 0;
/* Do a sanity check on min_size before trying to calculate new_l1_size
* (this prevents overflows during the while loop for the calculation of
* new_l1_size) */
if (min_size > INT_MAX / sizeof(uint64_t)) {
return -EFBIG;
}
if (exact_size) {
new_l1_size = min_size;
} else {
/* Bump size up to reduce the number of times we have to grow */
new_l1_size = s->l1_size;
if (new_l1_size == 0) {
new_l1_size = 1;
}
while (min_size > new_l1_size) {
new_l1_size = DIV_ROUND_UP(new_l1_size * 3, 2);
}
}
QEMU_BUILD_BUG_ON(QCOW_MAX_L1_SIZE > INT_MAX);
if (new_l1_size > QCOW_MAX_L1_SIZE / sizeof(uint64_t)) {
return -EFBIG;
}
#ifdef DEBUG_ALLOC2
fprintf(stderr, "grow l1_table from %d to %" PRId64 "\n",
s->l1_size, new_l1_size);
#endif
new_l1_size2 = sizeof(uint64_t) * new_l1_size;
new_l1_table = qemu_try_blockalign(bs->file->bs,
align_offset(new_l1_size2, 512));
if (new_l1_table == NULL) {
return -ENOMEM;
}
memset(new_l1_table, 0, align_offset(new_l1_size2, 512));
if (s->l1_size) {
memcpy(new_l1_table, s->l1_table, s->l1_size * sizeof(uint64_t));
}
/* write new table (align to cluster) */
BLKDBG_EVENT(bs->file, BLKDBG_L1_GROW_ALLOC_TABLE);
new_l1_table_offset = qcow2_alloc_clusters(bs, new_l1_size2);
if (new_l1_table_offset < 0) {
qemu_vfree(new_l1_table);
return new_l1_table_offset;
}
ret = qcow2_cache_flush(bs, s->refcount_block_cache);
if (ret < 0) {
goto fail;
}
/* the L1 position has not yet been updated, so these clusters must
* indeed be completely free */
ret = qcow2_pre_write_overlap_check(bs, 0, new_l1_table_offset,
new_l1_size2);
if (ret < 0) {
goto fail;
}
BLKDBG_EVENT(bs->file, BLKDBG_L1_GROW_WRITE_TABLE);
for(i = 0; i < s->l1_size; i++)
new_l1_table[i] = cpu_to_be64(new_l1_table[i]);
ret = bdrv_pwrite_sync(bs->file, new_l1_table_offset,
new_l1_table, new_l1_size2);
if (ret < 0)
goto fail;
for(i = 0; i < s->l1_size; i++)
new_l1_table[i] = be64_to_cpu(new_l1_table[i]);
/* set new table */
BLKDBG_EVENT(bs->file, BLKDBG_L1_GROW_ACTIVATE_TABLE);
stl_be_p(data, new_l1_size);
stq_be_p(data + 4, new_l1_table_offset);
ret = bdrv_pwrite_sync(bs->file, offsetof(QCowHeader, l1_size),
data, sizeof(data));
if (ret < 0) {
goto fail;
}
qemu_vfree(s->l1_table);
old_l1_table_offset = s->l1_table_offset;
s->l1_table_offset = new_l1_table_offset;
s->l1_table = new_l1_table;
old_l1_size = s->l1_size;
s->l1_size = new_l1_size;
qcow2_free_clusters(bs, old_l1_table_offset, old_l1_size * sizeof(uint64_t),
QCOW2_DISCARD_OTHER);
return 0;
fail:
qemu_vfree(new_l1_table);
qcow2_free_clusters(bs, new_l1_table_offset, new_l1_size2,
QCOW2_DISCARD_OTHER);
return ret;
}
/*
* l2_load
*
* Loads a L2 table into memory. If the table is in the cache, the cache
* is used; otherwise the L2 table is loaded from the image file.
*
* Returns a pointer to the L2 table on success, or NULL if the read from
* the image file failed.
*/
static int l2_load(BlockDriverState *bs, uint64_t l2_offset,
uint64_t **l2_table)
{
BDRVQcow2State *s = bs->opaque;
return qcow2_cache_get(bs, s->l2_table_cache, l2_offset,
(void **)l2_table);
}
/*
* Writes one sector of the L1 table to the disk (can't update single entries
* and we really don't want bdrv_pread to perform a read-modify-write)
*/
#define L1_ENTRIES_PER_SECTOR (512 / 8)
int qcow2_write_l1_entry(BlockDriverState *bs, int l1_index)
{
BDRVQcow2State *s = bs->opaque;
uint64_t buf[L1_ENTRIES_PER_SECTOR] = { 0 };
int l1_start_index;
int i, ret;
l1_start_index = l1_index & ~(L1_ENTRIES_PER_SECTOR - 1);
for (i = 0; i < L1_ENTRIES_PER_SECTOR && l1_start_index + i < s->l1_size;
i++)
{
buf[i] = cpu_to_be64(s->l1_table[l1_start_index + i]);
}
ret = qcow2_pre_write_overlap_check(bs, QCOW2_OL_ACTIVE_L1,
s->l1_table_offset + 8 * l1_start_index, sizeof(buf));
if (ret < 0) {
return ret;
}
BLKDBG_EVENT(bs->file, BLKDBG_L1_UPDATE);
ret = bdrv_pwrite_sync(bs->file,
s->l1_table_offset + 8 * l1_start_index,
buf, sizeof(buf));
if (ret < 0) {
return ret;
}
return 0;
}
/*
* l2_allocate
*
* Allocate a new l2 entry in the file. If l1_index points to an already
* used entry in the L2 table (i.e. we are doing a copy on write for the L2
* table) copy the contents of the old L2 table into the newly allocated one.
* Otherwise the new table is initialized with zeros.
*
*/
static int l2_allocate(BlockDriverState *bs, int l1_index, uint64_t **table)
{
BDRVQcow2State *s = bs->opaque;
uint64_t old_l2_offset;
uint64_t *l2_table = NULL;
int64_t l2_offset;
int ret;
old_l2_offset = s->l1_table[l1_index];
trace_qcow2_l2_allocate(bs, l1_index);
/* allocate a new l2 entry */
l2_offset = qcow2_alloc_clusters(bs, s->l2_size * sizeof(uint64_t));
if (l2_offset < 0) {
ret = l2_offset;
goto fail;
}
ret = qcow2_cache_flush(bs, s->refcount_block_cache);
if (ret < 0) {
goto fail;
}
/* allocate a new entry in the l2 cache */
trace_qcow2_l2_allocate_get_empty(bs, l1_index);
ret = qcow2_cache_get_empty(bs, s->l2_table_cache, l2_offset, (void**) table);
if (ret < 0) {
goto fail;
}
l2_table = *table;
if ((old_l2_offset & L1E_OFFSET_MASK) == 0) {
/* if there was no old l2 table, clear the new table */
memset(l2_table, 0, s->l2_size * sizeof(uint64_t));
} else {
uint64_t* old_table;
/* if there was an old l2 table, read it from the disk */
BLKDBG_EVENT(bs->file, BLKDBG_L2_ALLOC_COW_READ);
ret = qcow2_cache_get(bs, s->l2_table_cache,
old_l2_offset & L1E_OFFSET_MASK,
(void**) &old_table);
if (ret < 0) {
goto fail;
}
memcpy(l2_table, old_table, s->cluster_size);
qcow2_cache_put(bs, s->l2_table_cache, (void **) &old_table);
}
/* write the l2 table to the file */
BLKDBG_EVENT(bs->file, BLKDBG_L2_ALLOC_WRITE);
trace_qcow2_l2_allocate_write_l2(bs, l1_index);
qcow2_cache_entry_mark_dirty(bs, s->l2_table_cache, l2_table);
ret = qcow2_cache_flush(bs, s->l2_table_cache);
if (ret < 0) {
goto fail;
}
/* update the L1 entry */
trace_qcow2_l2_allocate_write_l1(bs, l1_index);
s->l1_table[l1_index] = l2_offset | QCOW_OFLAG_COPIED;
ret = qcow2_write_l1_entry(bs, l1_index);
if (ret < 0) {
goto fail;
}
*table = l2_table;
trace_qcow2_l2_allocate_done(bs, l1_index, 0);
return 0;
fail:
trace_qcow2_l2_allocate_done(bs, l1_index, ret);
if (l2_table != NULL) {
qcow2_cache_put(bs, s->l2_table_cache, (void**) table);
}
s->l1_table[l1_index] = old_l2_offset;
if (l2_offset > 0) {
qcow2_free_clusters(bs, l2_offset, s->l2_size * sizeof(uint64_t),
QCOW2_DISCARD_ALWAYS);
}
return ret;
}
/*
* Checks how many clusters in a given L2 table are contiguous in the image
* file. As soon as one of the flags in the bitmask stop_flags changes compared
* to the first cluster, the search is stopped and the cluster is not counted
* as contiguous. (This allows it, for example, to stop at the first compressed
* cluster which may require a different handling)
*/
static int count_contiguous_clusters(int nb_clusters, int cluster_size,
uint64_t *l2_table, uint64_t stop_flags)
{
int i;
QCow2ClusterType first_cluster_type;
uint64_t mask = stop_flags | L2E_OFFSET_MASK | QCOW_OFLAG_COMPRESSED;
uint64_t first_entry = be64_to_cpu(l2_table[0]);
uint64_t offset = first_entry & mask;
if (!offset) {
return 0;
}
/* must be allocated */
first_cluster_type = qcow2_get_cluster_type(first_entry);
assert(first_cluster_type == QCOW2_CLUSTER_NORMAL ||
first_cluster_type == QCOW2_CLUSTER_ZERO_ALLOC);
for (i = 0; i < nb_clusters; i++) {
uint64_t l2_entry = be64_to_cpu(l2_table[i]) & mask;
if (offset + (uint64_t) i * cluster_size != l2_entry) {
break;
}
}
return i;
}
/*
* Checks how many consecutive unallocated clusters in a given L2
* table have the same cluster type.
*/
static int count_contiguous_clusters_unallocated(int nb_clusters,
uint64_t *l2_table,
QCow2ClusterType wanted_type)
{
int i;
assert(wanted_type == QCOW2_CLUSTER_ZERO_PLAIN ||
wanted_type == QCOW2_CLUSTER_UNALLOCATED);
for (i = 0; i < nb_clusters; i++) {
uint64_t entry = be64_to_cpu(l2_table[i]);
QCow2ClusterType type = qcow2_get_cluster_type(entry);
if (type != wanted_type) {
break;
}
}
return i;
}
static int coroutine_fn do_perform_cow_read(BlockDriverState *bs,
uint64_t src_cluster_offset,
unsigned offset_in_cluster,
QEMUIOVector *qiov)
{
int ret;
if (qiov->size == 0) {
return 0;
}
BLKDBG_EVENT(bs->file, BLKDBG_COW_READ);
if (!bs->drv) {
return -ENOMEDIUM;
}
/* Call .bdrv_co_readv() directly instead of using the public block-layer
* interface. This avoids double I/O throttling and request tracking,
* which can lead to deadlock when block layer copy-on-read is enabled.
*/
ret = bs->drv->bdrv_co_preadv(bs, src_cluster_offset + offset_in_cluster,
qiov->size, qiov, 0);
if (ret < 0) {
return ret;
}
return 0;
}
static bool coroutine_fn do_perform_cow_encrypt(BlockDriverState *bs,
uint64_t src_cluster_offset,
uint64_t cluster_offset,
unsigned offset_in_cluster,
uint8_t *buffer,
unsigned bytes)
{
if (bytes && bs->encrypted) {
BDRVQcow2State *s = bs->opaque;
int64_t offset = (s->crypt_physical_offset ?
(cluster_offset + offset_in_cluster) :
(src_cluster_offset + offset_in_cluster));
assert((offset_in_cluster & ~BDRV_SECTOR_MASK) == 0);
assert((bytes & ~BDRV_SECTOR_MASK) == 0);
assert(s->crypto);
if (qcrypto_block_encrypt(s->crypto, offset, buffer, bytes, NULL) < 0) {
return false;
}
}
return true;
}
static int coroutine_fn do_perform_cow_write(BlockDriverState *bs,
uint64_t cluster_offset,
unsigned offset_in_cluster,
QEMUIOVector *qiov)
{
int ret;
if (qiov->size == 0) {
return 0;
}
ret = qcow2_pre_write_overlap_check(bs, 0,
cluster_offset + offset_in_cluster, qiov->size);
if (ret < 0) {
return ret;
}
BLKDBG_EVENT(bs->file, BLKDBG_COW_WRITE);
ret = bdrv_co_pwritev(bs->file, cluster_offset + offset_in_cluster,
qiov->size, qiov, 0);
if (ret < 0) {
return ret;
}
return 0;
}
/*
* get_cluster_offset
*
* For a given offset of the virtual disk, find the cluster type and offset in
* the qcow2 file. The offset is stored in *cluster_offset.
*
* On entry, *bytes is the maximum number of contiguous bytes starting at
* offset that we are interested in.
*
* On exit, *bytes is the number of bytes starting at offset that have the same
* cluster type and (if applicable) are stored contiguously in the image file.
* Compressed clusters are always returned one by one.
*
* Returns the cluster type (QCOW2_CLUSTER_*) on success, -errno in error
* cases.
*/
int qcow2_get_cluster_offset(BlockDriverState *bs, uint64_t offset,
unsigned int *bytes, uint64_t *cluster_offset)
{
BDRVQcow2State *s = bs->opaque;
unsigned int l2_index;
uint64_t l1_index, l2_offset, *l2_table;
int l1_bits, c;
unsigned int offset_in_cluster;
uint64_t bytes_available, bytes_needed, nb_clusters;
QCow2ClusterType type;
int ret;
offset_in_cluster = offset_into_cluster(s, offset);
bytes_needed = (uint64_t) *bytes + offset_in_cluster;
l1_bits = s->l2_bits + s->cluster_bits;
/* compute how many bytes there are between the start of the cluster
* containing offset and the end of the l1 entry */
bytes_available = (1ULL << l1_bits) - (offset & ((1ULL << l1_bits) - 1))
+ offset_in_cluster;
if (bytes_needed > bytes_available) {
bytes_needed = bytes_available;
}
*cluster_offset = 0;
/* seek to the l2 offset in the l1 table */
l1_index = offset >> l1_bits;
if (l1_index >= s->l1_size) {
type = QCOW2_CLUSTER_UNALLOCATED;
goto out;
}
l2_offset = s->l1_table[l1_index] & L1E_OFFSET_MASK;
if (!l2_offset) {
type = QCOW2_CLUSTER_UNALLOCATED;
goto out;
}
if (offset_into_cluster(s, l2_offset)) {
qcow2_signal_corruption(bs, true, -1, -1, "L2 table offset %#" PRIx64
" unaligned (L1 index: %#" PRIx64 ")",
l2_offset, l1_index);
return -EIO;
}
/* load the l2 table in memory */
ret = l2_load(bs, l2_offset, &l2_table);
if (ret < 0) {
return ret;
}
/* find the cluster offset for the given disk offset */
l2_index = offset_to_l2_index(s, offset);
*cluster_offset = be64_to_cpu(l2_table[l2_index]);
nb_clusters = size_to_clusters(s, bytes_needed);
/* bytes_needed <= *bytes + offset_in_cluster, both of which are unsigned
* integers; the minimum cluster size is 512, so this assertion is always
* true */
assert(nb_clusters <= INT_MAX);
type = qcow2_get_cluster_type(*cluster_offset);
if (s->qcow_version < 3 && (type == QCOW2_CLUSTER_ZERO_PLAIN ||
type == QCOW2_CLUSTER_ZERO_ALLOC)) {
qcow2_signal_corruption(bs, true, -1, -1, "Zero cluster entry found"
" in pre-v3 image (L2 offset: %#" PRIx64
", L2 index: %#x)", l2_offset, l2_index);
ret = -EIO;
goto fail;
}
switch (type) {
case QCOW2_CLUSTER_COMPRESSED:
/* Compressed clusters can only be processed one by one */
c = 1;
*cluster_offset &= L2E_COMPRESSED_OFFSET_SIZE_MASK;
break;
case QCOW2_CLUSTER_ZERO_PLAIN:
case QCOW2_CLUSTER_UNALLOCATED:
/* how many empty clusters ? */
c = count_contiguous_clusters_unallocated(nb_clusters,
&l2_table[l2_index], type);
*cluster_offset = 0;
break;
case QCOW2_CLUSTER_ZERO_ALLOC:
case QCOW2_CLUSTER_NORMAL:
/* how many allocated clusters ? */
c = count_contiguous_clusters(nb_clusters, s->cluster_size,
&l2_table[l2_index], QCOW_OFLAG_ZERO);
*cluster_offset &= L2E_OFFSET_MASK;
if (offset_into_cluster(s, *cluster_offset)) {
qcow2_signal_corruption(bs, true, -1, -1,
"Cluster allocation offset %#"
PRIx64 " unaligned (L2 offset: %#" PRIx64
", L2 index: %#x)", *cluster_offset,
l2_offset, l2_index);
ret = -EIO;
goto fail;
}
break;
default:
abort();
}
qcow2_cache_put(bs, s->l2_table_cache, (void**) &l2_table);
bytes_available = (int64_t)c * s->cluster_size;
out:
if (bytes_available > bytes_needed) {
bytes_available = bytes_needed;
}
/* bytes_available <= bytes_needed <= *bytes + offset_in_cluster;
* subtracting offset_in_cluster will therefore definitely yield something
* not exceeding UINT_MAX */
assert(bytes_available - offset_in_cluster <= UINT_MAX);
*bytes = bytes_available - offset_in_cluster;
return type;
fail:
qcow2_cache_put(bs, s->l2_table_cache, (void **)&l2_table);
return ret;
}
/*
* get_cluster_table
*
* for a given disk offset, load (and allocate if needed)
* the l2 table.
*
* the l2 table offset in the qcow2 file and the cluster index
* in the l2 table are given to the caller.
*
* Returns 0 on success, -errno in failure case
*/
static int get_cluster_table(BlockDriverState *bs, uint64_t offset,
uint64_t **new_l2_table,
int *new_l2_index)
{
BDRVQcow2State *s = bs->opaque;
unsigned int l2_index;
uint64_t l1_index, l2_offset;
uint64_t *l2_table = NULL;
int ret;
/* seek to the l2 offset in the l1 table */
l1_index = offset >> (s->l2_bits + s->cluster_bits);
if (l1_index >= s->l1_size) {
ret = qcow2_grow_l1_table(bs, l1_index + 1, false);
if (ret < 0) {
return ret;
}
}
assert(l1_index < s->l1_size);
l2_offset = s->l1_table[l1_index] & L1E_OFFSET_MASK;
if (offset_into_cluster(s, l2_offset)) {
qcow2_signal_corruption(bs, true, -1, -1, "L2 table offset %#" PRIx64
" unaligned (L1 index: %#" PRIx64 ")",
l2_offset, l1_index);
return -EIO;
}
/* seek the l2 table of the given l2 offset */
if (s->l1_table[l1_index] & QCOW_OFLAG_COPIED) {
/* load the l2 table in memory */
ret = l2_load(bs, l2_offset, &l2_table);
if (ret < 0) {
return ret;
}
} else {
/* First allocate a new L2 table (and do COW if needed) */
ret = l2_allocate(bs, l1_index, &l2_table);
if (ret < 0) {
return ret;
}
/* Then decrease the refcount of the old table */
if (l2_offset) {
qcow2_free_clusters(bs, l2_offset, s->l2_size * sizeof(uint64_t),
QCOW2_DISCARD_OTHER);
}
}
/* find the cluster offset for the given disk offset */
l2_index = offset_to_l2_index(s, offset);
*new_l2_table = l2_table;
*new_l2_index = l2_index;
return 0;
}
/*
* alloc_compressed_cluster_offset
*
* For a given offset of the disk image, return cluster offset in
* qcow2 file.
*
* If the offset is not found, allocate a new compressed cluster.
*
* Return the cluster offset if successful,
* Return 0, otherwise.
*
*/
uint64_t qcow2_alloc_compressed_cluster_offset(BlockDriverState *bs,
uint64_t offset,
int compressed_size)
{
BDRVQcow2State *s = bs->opaque;
int l2_index, ret;
uint64_t *l2_table;
int64_t cluster_offset;
int nb_csectors;
ret = get_cluster_table(bs, offset, &l2_table, &l2_index);
if (ret < 0) {
return 0;
}
/* Compression can't overwrite anything. Fail if the cluster was already
* allocated. */
cluster_offset = be64_to_cpu(l2_table[l2_index]);
if (cluster_offset & L2E_OFFSET_MASK) {
qcow2_cache_put(bs, s->l2_table_cache, (void**) &l2_table);
return 0;
}
cluster_offset = qcow2_alloc_bytes(bs, compressed_size);
if (cluster_offset < 0) {
qcow2_cache_put(bs, s->l2_table_cache, (void**) &l2_table);
return 0;
}
nb_csectors = ((cluster_offset + compressed_size - 1) >> 9) -
(cluster_offset >> 9);
cluster_offset |= QCOW_OFLAG_COMPRESSED |
((uint64_t)nb_csectors << s->csize_shift);
/* update L2 table */
/* compressed clusters never have the copied flag */
BLKDBG_EVENT(bs->file, BLKDBG_L2_UPDATE_COMPRESSED);
qcow2_cache_entry_mark_dirty(bs, s->l2_table_cache, l2_table);
l2_table[l2_index] = cpu_to_be64(cluster_offset);
qcow2_cache_put(bs, s->l2_table_cache, (void **) &l2_table);
return cluster_offset;
}
static int perform_cow(BlockDriverState *bs, QCowL2Meta *m)
{
BDRVQcow2State *s = bs->opaque;
Qcow2COWRegion *start = &m->cow_start;
Qcow2COWRegion *end = &m->cow_end;
unsigned buffer_size;
unsigned data_bytes = end->offset - (start->offset + start->nb_bytes);
bool merge_reads;
uint8_t *start_buffer, *end_buffer;
QEMUIOVector qiov;
int ret;
assert(start->nb_bytes <= UINT_MAX - end->nb_bytes);
assert(start->nb_bytes + end->nb_bytes <= UINT_MAX - data_bytes);
assert(start->offset + start->nb_bytes <= end->offset);
assert(!m->data_qiov || m->data_qiov->size == data_bytes);
if (start->nb_bytes == 0 && end->nb_bytes == 0) {
return 0;
}
/* If we have to read both the start and end COW regions and the
* middle region is not too large then perform just one read
* operation */
merge_reads = start->nb_bytes && end->nb_bytes && data_bytes <= 16384;
if (merge_reads) {
buffer_size = start->nb_bytes + data_bytes + end->nb_bytes;
} else {
/* If we have to do two reads, add some padding in the middle
* if necessary to make sure that the end region is optimally
* aligned. */
size_t align = bdrv_opt_mem_align(bs);
assert(align > 0 && align <= UINT_MAX);
assert(QEMU_ALIGN_UP(start->nb_bytes, align) <=
UINT_MAX - end->nb_bytes);
buffer_size = QEMU_ALIGN_UP(start->nb_bytes, align) + end->nb_bytes;
}
/* Reserve a buffer large enough to store all the data that we're
* going to read */
start_buffer = qemu_try_blockalign(bs, buffer_size);
if (start_buffer == NULL) {
return -ENOMEM;
}
/* The part of the buffer where the end region is located */
end_buffer = start_buffer + buffer_size - end->nb_bytes;
qemu_iovec_init(&qiov, 2 + (m->data_qiov ? m->data_qiov->niov : 0));
qemu_co_mutex_unlock(&s->lock);
/* First we read the existing data from both COW regions. We
* either read the whole region in one go, or the start and end
* regions separately. */
if (merge_reads) {
qemu_iovec_add(&qiov, start_buffer, buffer_size);
ret = do_perform_cow_read(bs, m->offset, start->offset, &qiov);
} else {
qemu_iovec_add(&qiov, start_buffer, start->nb_bytes);
ret = do_perform_cow_read(bs, m->offset, start->offset, &qiov);
if (ret < 0) {
goto fail;
}
qemu_iovec_reset(&qiov);
qemu_iovec_add(&qiov, end_buffer, end->nb_bytes);
ret = do_perform_cow_read(bs, m->offset, end->offset, &qiov);
}
if (ret < 0) {
goto fail;
}
/* Encrypt the data if necessary before writing it */
if (bs->encrypted) {
if (!do_perform_cow_encrypt(bs, m->offset, m->alloc_offset,
start->offset, start_buffer,
start->nb_bytes) ||
!do_perform_cow_encrypt(bs, m->offset, m->alloc_offset,
end->offset, end_buffer, end->nb_bytes)) {
ret = -EIO;
goto fail;
}
}
/* And now we can write everything. If we have the guest data we
* can write everything in one single operation */
if (m->data_qiov) {
qemu_iovec_reset(&qiov);
if (start->nb_bytes) {
qemu_iovec_add(&qiov, start_buffer, start->nb_bytes);
}
qemu_iovec_concat(&qiov, m->data_qiov, 0, data_bytes);
if (end->nb_bytes) {
qemu_iovec_add(&qiov, end_buffer, end->nb_bytes);
}
/* NOTE: we have a write_aio blkdebug event here followed by
* a cow_write one in do_perform_cow_write(), but there's only
* one single I/O operation */
BLKDBG_EVENT(bs->file, BLKDBG_WRITE_AIO);
ret = do_perform_cow_write(bs, m->alloc_offset, start->offset, &qiov);
} else {
/* If there's no guest data then write both COW regions separately */
qemu_iovec_reset(&qiov);
qemu_iovec_add(&qiov, start_buffer, start->nb_bytes);
ret = do_perform_cow_write(bs, m->alloc_offset, start->offset, &qiov);
if (ret < 0) {
goto fail;
}
qemu_iovec_reset(&qiov);
qemu_iovec_add(&qiov, end_buffer, end->nb_bytes);
ret = do_perform_cow_write(bs, m->alloc_offset, end->offset, &qiov);
}
fail:
qemu_co_mutex_lock(&s->lock);
/*
* Before we update the L2 table to actually point to the new cluster, we
* need to be sure that the refcounts have been increased and COW was
* handled.
*/
if (ret == 0) {
qcow2_cache_depends_on_flush(s->l2_table_cache);
}
qemu_vfree(start_buffer);
qemu_iovec_destroy(&qiov);
return ret;
}
int qcow2_alloc_cluster_link_l2(BlockDriverState *bs, QCowL2Meta *m)
{
BDRVQcow2State *s = bs->opaque;
int i, j = 0, l2_index, ret;
uint64_t *old_cluster, *l2_table;
uint64_t cluster_offset = m->alloc_offset;
trace_qcow2_cluster_link_l2(qemu_coroutine_self(), m->nb_clusters);
assert(m->nb_clusters > 0);
old_cluster = g_try_new(uint64_t, m->nb_clusters);
if (old_cluster == NULL) {
ret = -ENOMEM;
goto err;
}
/* copy content of unmodified sectors */
ret = perform_cow(bs, m);
if (ret < 0) {
goto err;
}
/* Update L2 table. */
if (s->use_lazy_refcounts) {
qcow2_mark_dirty(bs);
}
if (qcow2_need_accurate_refcounts(s)) {
qcow2_cache_set_dependency(bs, s->l2_table_cache,
s->refcount_block_cache);
}
ret = get_cluster_table(bs, m->offset, &l2_table, &l2_index);
if (ret < 0) {
goto err;
}
qcow2_cache_entry_mark_dirty(bs, s->l2_table_cache, l2_table);
assert(l2_index + m->nb_clusters <= s->l2_size);
for (i = 0; i < m->nb_clusters; i++) {
/* if two concurrent writes happen to the same unallocated cluster
* each write allocates separate cluster and writes data concurrently.
* The first one to complete updates l2 table with pointer to its
* cluster the second one has to do RMW (which is done above by
* perform_cow()), update l2 table with its cluster pointer and free
* old cluster. This is what this loop does */
if (l2_table[l2_index + i] != 0) {
old_cluster[j++] = l2_table[l2_index + i];
}
l2_table[l2_index + i] = cpu_to_be64((cluster_offset +
(i << s->cluster_bits)) | QCOW_OFLAG_COPIED);
}
qcow2_cache_put(bs, s->l2_table_cache, (void **) &l2_table);
/*
* If this was a COW, we need to decrease the refcount of the old cluster.
*
* Don't discard clusters that reach a refcount of 0 (e.g. compressed
* clusters), the next write will reuse them anyway.
*/
if (!m->keep_old_clusters && j != 0) {
for (i = 0; i < j; i++) {
qcow2_free_any_clusters(bs, be64_to_cpu(old_cluster[i]), 1,
QCOW2_DISCARD_NEVER);
}
}
ret = 0;
err:
g_free(old_cluster);
return ret;
}
/*
* Returns the number of contiguous clusters that can be used for an allocating
* write, but require COW to be performed (this includes yet unallocated space,
* which must copy from the backing file)
*/
static int count_cow_clusters(BDRVQcow2State *s, int nb_clusters,
uint64_t *l2_table, int l2_index)
{
int i;
for (i = 0; i < nb_clusters; i++) {
uint64_t l2_entry = be64_to_cpu(l2_table[l2_index + i]);
QCow2ClusterType cluster_type = qcow2_get_cluster_type(l2_entry);
switch(cluster_type) {
case QCOW2_CLUSTER_NORMAL:
if (l2_entry & QCOW_OFLAG_COPIED) {
goto out;
}
break;
case QCOW2_CLUSTER_UNALLOCATED:
case QCOW2_CLUSTER_COMPRESSED:
case QCOW2_CLUSTER_ZERO_PLAIN:
case QCOW2_CLUSTER_ZERO_ALLOC:
break;
default:
abort();
}
}
out:
assert(i <= nb_clusters);
return i;
}
/*
* Check if there already is an AIO write request in flight which allocates
* the same cluster. In this case we need to wait until the previous
* request has completed and updated the L2 table accordingly.
*
* Returns:
* 0 if there was no dependency. *cur_bytes indicates the number of
* bytes from guest_offset that can be read before the next
* dependency must be processed (or the request is complete)
*
* -EAGAIN if we had to wait for another request, previously gathered
* information on cluster allocation may be invalid now. The caller
* must start over anyway, so consider *cur_bytes undefined.
*/
static int handle_dependencies(BlockDriverState *bs, uint64_t guest_offset,
uint64_t *cur_bytes, QCowL2Meta **m)
{
BDRVQcow2State *s = bs->opaque;
QCowL2Meta *old_alloc;
uint64_t bytes = *cur_bytes;
QLIST_FOREACH(old_alloc, &s->cluster_allocs, next_in_flight) {
uint64_t start = guest_offset;
uint64_t end = start + bytes;
uint64_t old_start = l2meta_cow_start(old_alloc);
uint64_t old_end = l2meta_cow_end(old_alloc);
if (end <= old_start || start >= old_end) {
/* No intersection */
} else {
if (start < old_start) {
/* Stop at the start of a running allocation */
bytes = old_start - start;
} else {
bytes = 0;
}
/* Stop if already an l2meta exists. After yielding, it wouldn't
* be valid any more, so we'd have to clean up the old L2Metas
* and deal with requests depending on them before starting to
* gather new ones. Not worth the trouble. */
if (bytes == 0 && *m) {
*cur_bytes = 0;
return 0;
}
if (bytes == 0) {
/* Wait for the dependency to complete. We need to recheck
* the free/allocated clusters when we continue. */
qemu_co_queue_wait(&old_alloc->dependent_requests, &s->lock);
return -EAGAIN;
}
}
}
/* Make sure that existing clusters and new allocations are only used up to
* the next dependency if we shortened the request above */
*cur_bytes = bytes;
return 0;
}
/*
* Checks how many already allocated clusters that don't require a copy on
* write there are at the given guest_offset (up to *bytes). If
* *host_offset is not zero, only physically contiguous clusters beginning at
* this host offset are counted.
*
* Note that guest_offset may not be cluster aligned. In this case, the
* returned *host_offset points to exact byte referenced by guest_offset and
* therefore isn't cluster aligned as well.
*
* Returns:
* 0: if no allocated clusters are available at the given offset.
* *bytes is normally unchanged. It is set to 0 if the cluster
* is allocated and doesn't need COW, but doesn't have the right
* physical offset.
*
* 1: if allocated clusters that don't require a COW are available at
* the requested offset. *bytes may have decreased and describes
* the length of the area that can be written to.
*
* -errno: in error cases
*/
static int handle_copied(BlockDriverState *bs, uint64_t guest_offset,
uint64_t *host_offset, uint64_t *bytes, QCowL2Meta **m)
{
BDRVQcow2State *s = bs->opaque;
int l2_index;
uint64_t cluster_offset;
uint64_t *l2_table;
uint64_t nb_clusters;
unsigned int keep_clusters;
int ret;
trace_qcow2_handle_copied(qemu_coroutine_self(), guest_offset, *host_offset,
*bytes);
assert(*host_offset == 0 || offset_into_cluster(s, guest_offset)
== offset_into_cluster(s, *host_offset));
/*
* Calculate the number of clusters to look for. We stop at L2 table
* boundaries to keep things simple.
*/
nb_clusters =
size_to_clusters(s, offset_into_cluster(s, guest_offset) + *bytes);
l2_index = offset_to_l2_index(s, guest_offset);
nb_clusters = MIN(nb_clusters, s->l2_size - l2_index);
assert(nb_clusters <= INT_MAX);
/* Find L2 entry for the first involved cluster */
ret = get_cluster_table(bs, guest_offset, &l2_table, &l2_index);
if (ret < 0) {
return ret;
}
cluster_offset = be64_to_cpu(l2_table[l2_index]);
/* Check how many clusters are already allocated and don't need COW */
if (qcow2_get_cluster_type(cluster_offset) == QCOW2_CLUSTER_NORMAL
&& (cluster_offset & QCOW_OFLAG_COPIED))
{
/* If a specific host_offset is required, check it */
bool offset_matches =
(cluster_offset & L2E_OFFSET_MASK) == *host_offset;
if (offset_into_cluster(s, cluster_offset & L2E_OFFSET_MASK)) {
qcow2_signal_corruption(bs, true, -1, -1, "Data cluster offset "
"%#llx unaligned (guest offset: %#" PRIx64
")", cluster_offset & L2E_OFFSET_MASK,
guest_offset);
ret = -EIO;
goto out;
}
if (*host_offset != 0 && !offset_matches) {
*bytes = 0;
ret = 0;
goto out;
}
/* We keep all QCOW_OFLAG_COPIED clusters */
keep_clusters =
count_contiguous_clusters(nb_clusters, s->cluster_size,
&l2_table[l2_index],
QCOW_OFLAG_COPIED | QCOW_OFLAG_ZERO);
assert(keep_clusters <= nb_clusters);
*bytes = MIN(*bytes,
keep_clusters * s->cluster_size
- offset_into_cluster(s, guest_offset));
ret = 1;
} else {
ret = 0;
}
/* Cleanup */
out:
qcow2_cache_put(bs, s->l2_table_cache, (void **) &l2_table);
/* Only return a host offset if we actually made progress. Otherwise we
* would make requirements for handle_alloc() that it can't fulfill */
if (ret > 0) {
*host_offset = (cluster_offset & L2E_OFFSET_MASK)
+ offset_into_cluster(s, guest_offset);
}
return ret;
}
/*
* Allocates new clusters for the given guest_offset.
*
* At most *nb_clusters are allocated, and on return *nb_clusters is updated to
* contain the number of clusters that have been allocated and are contiguous
* in the image file.
*
* If *host_offset is non-zero, it specifies the offset in the image file at
* which the new clusters must start. *nb_clusters can be 0 on return in this
* case if the cluster at host_offset is already in use. If *host_offset is
* zero, the clusters can be allocated anywhere in the image file.
*
* *host_offset is updated to contain the offset into the image file at which
* the first allocated cluster starts.
*
* Return 0 on success and -errno in error cases. -EAGAIN means that the
* function has been waiting for another request and the allocation must be
* restarted, but the whole request should not be failed.
*/
static int do_alloc_cluster_offset(BlockDriverState *bs, uint64_t guest_offset,
uint64_t *host_offset, uint64_t *nb_clusters)
{
BDRVQcow2State *s = bs->opaque;
trace_qcow2_do_alloc_clusters_offset(qemu_coroutine_self(), guest_offset,
*host_offset, *nb_clusters);
/* Allocate new clusters */
trace_qcow2_cluster_alloc_phys(qemu_coroutine_self());
if (*host_offset == 0) {
int64_t cluster_offset =
qcow2_alloc_clusters(bs, *nb_clusters * s->cluster_size);
if (cluster_offset < 0) {
return cluster_offset;
}
*host_offset = cluster_offset;
return 0;
} else {
int64_t ret = qcow2_alloc_clusters_at(bs, *host_offset, *nb_clusters);
if (ret < 0) {
return ret;
}
*nb_clusters = ret;
return 0;
}
}
/*
* Allocates new clusters for an area that either is yet unallocated or needs a
* copy on write. If *host_offset is non-zero, clusters are only allocated if
* the new allocation can match the specified host offset.
*
* Note that guest_offset may not be cluster aligned. In this case, the
* returned *host_offset points to exact byte referenced by guest_offset and
* therefore isn't cluster aligned as well.
*
* Returns:
* 0: if no clusters could be allocated. *bytes is set to 0,
* *host_offset is left unchanged.
*
* 1: if new clusters were allocated. *bytes may be decreased if the
* new allocation doesn't cover all of the requested area.
* *host_offset is updated to contain the host offset of the first
* newly allocated cluster.
*
* -errno: in error cases
*/
static int handle_alloc(BlockDriverState *bs, uint64_t guest_offset,
uint64_t *host_offset, uint64_t *bytes, QCowL2Meta **m)
{
BDRVQcow2State *s = bs->opaque;
int l2_index;
uint64_t *l2_table;
uint64_t entry;
uint64_t nb_clusters;
int ret;
bool keep_old_clusters = false;
uint64_t alloc_cluster_offset = 0;
trace_qcow2_handle_alloc(qemu_coroutine_self(), guest_offset, *host_offset,
*bytes);
assert(*bytes > 0);
/*
* Calculate the number of clusters to look for. We stop at L2 table
* boundaries to keep things simple.
*/
nb_clusters =
size_to_clusters(s, offset_into_cluster(s, guest_offset) + *bytes);
l2_index = offset_to_l2_index(s, guest_offset);
nb_clusters = MIN(nb_clusters, s->l2_size - l2_index);
assert(nb_clusters <= INT_MAX);
/* Find L2 entry for the first involved cluster */
ret = get_cluster_table(bs, guest_offset, &l2_table, &l2_index);
if (ret < 0) {
return ret;
}
entry = be64_to_cpu(l2_table[l2_index]);
/* For the moment, overwrite compressed clusters one by one */
if (entry & QCOW_OFLAG_COMPRESSED) {
nb_clusters = 1;
} else {
nb_clusters = count_cow_clusters(s, nb_clusters, l2_table, l2_index);
}
/* This function is only called when there were no non-COW clusters, so if
* we can't find any unallocated or COW clusters either, something is
* wrong with our code. */
assert(nb_clusters > 0);
if (qcow2_get_cluster_type(entry) == QCOW2_CLUSTER_ZERO_ALLOC &&
(entry & QCOW_OFLAG_COPIED) &&
(!*host_offset ||
start_of_cluster(s, *host_offset) == (entry & L2E_OFFSET_MASK)))
{
/* Try to reuse preallocated zero clusters; contiguous normal clusters
* would be fine, too, but count_cow_clusters() above has limited
* nb_clusters already to a range of COW clusters */
int preallocated_nb_clusters =
count_contiguous_clusters(nb_clusters, s->cluster_size,
&l2_table[l2_index], QCOW_OFLAG_COPIED);
assert(preallocated_nb_clusters > 0);
nb_clusters = preallocated_nb_clusters;
alloc_cluster_offset = entry & L2E_OFFSET_MASK;
/* We want to reuse these clusters, so qcow2_alloc_cluster_link_l2()
* should not free them. */
keep_old_clusters = true;
}
qcow2_cache_put(bs, s->l2_table_cache, (void **) &l2_table);
if (!alloc_cluster_offset) {
/* Allocate, if necessary at a given offset in the image file */
alloc_cluster_offset = start_of_cluster(s, *host_offset);
ret = do_alloc_cluster_offset(bs, guest_offset, &alloc_cluster_offset,
&nb_clusters);
if (ret < 0) {
goto fail;
}
/* Can't extend contiguous allocation */
if (nb_clusters == 0) {
*bytes = 0;
return 0;
}
/* !*host_offset would overwrite the image header and is reserved for
* "no host offset preferred". If 0 was a valid host offset, it'd
* trigger the following overlap check; do that now to avoid having an
* invalid value in *host_offset. */
if (!alloc_cluster_offset) {
ret = qcow2_pre_write_overlap_check(bs, 0, alloc_cluster_offset,
nb_clusters * s->cluster_size);
assert(ret < 0);
goto fail;
}
}
/*
* Save info needed for meta data update.
*
* requested_bytes: Number of bytes from the start of the first
* newly allocated cluster to the end of the (possibly shortened
* before) write request.
*
* avail_bytes: Number of bytes from the start of the first
* newly allocated to the end of the last newly allocated cluster.
*
* nb_bytes: The number of bytes from the start of the first
* newly allocated cluster to the end of the area that the write
* request actually writes to (excluding COW at the end)
*/
uint64_t requested_bytes = *bytes + offset_into_cluster(s, guest_offset);
int avail_bytes = MIN(INT_MAX, nb_clusters << s->cluster_bits);
int nb_bytes = MIN(requested_bytes, avail_bytes);
QCowL2Meta *old_m = *m;
*m = g_malloc0(sizeof(**m));
**m = (QCowL2Meta) {
.next = old_m,
.alloc_offset = alloc_cluster_offset,
.offset = start_of_cluster(s, guest_offset),
.nb_clusters = nb_clusters,
.keep_old_clusters = keep_old_clusters,
.cow_start = {
.offset = 0,
.nb_bytes = offset_into_cluster(s, guest_offset),
},
.cow_end = {
.offset = nb_bytes,
.nb_bytes = avail_bytes - nb_bytes,
},
};
qemu_co_queue_init(&(*m)->dependent_requests);
QLIST_INSERT_HEAD(&s->cluster_allocs, *m, next_in_flight);
*host_offset = alloc_cluster_offset + offset_into_cluster(s, guest_offset);
*bytes = MIN(*bytes, nb_bytes - offset_into_cluster(s, guest_offset));
assert(*bytes != 0);
return 1;
fail:
if (*m && (*m)->nb_clusters > 0) {
QLIST_REMOVE(*m, next_in_flight);
}
return ret;
}
/*
* alloc_cluster_offset
*
* For a given offset on the virtual disk, find the cluster offset in qcow2
* file. If the offset is not found, allocate a new cluster.
*
* If the cluster was already allocated, m->nb_clusters is set to 0 and
* other fields in m are meaningless.
*
* If the cluster is newly allocated, m->nb_clusters is set to the number of
* contiguous clusters that have been allocated. In this case, the other
* fields of m are valid and contain information about the first allocated
* cluster.
*
* If the request conflicts with another write request in flight, the coroutine
* is queued and will be reentered when the dependency has completed.
*
* Return 0 on success and -errno in error cases
*/
int qcow2_alloc_cluster_offset(BlockDriverState *bs, uint64_t offset,
unsigned int *bytes, uint64_t *host_offset,
QCowL2Meta **m)
{
BDRVQcow2State *s = bs->opaque;
uint64_t start, remaining;
uint64_t cluster_offset;
uint64_t cur_bytes;
int ret;
trace_qcow2_alloc_clusters_offset(qemu_coroutine_self(), offset, *bytes);
again:
start = offset;
remaining = *bytes;
cluster_offset = 0;
*host_offset = 0;
cur_bytes = 0;
*m = NULL;
while (true) {
if (!*host_offset) {
*host_offset = start_of_cluster(s, cluster_offset);
}
assert(remaining >= cur_bytes);
start += cur_bytes;
remaining -= cur_bytes;
cluster_offset += cur_bytes;
if (remaining == 0) {
break;
}
cur_bytes = remaining;
/*
* Now start gathering as many contiguous clusters as possible:
*
* 1. Check for overlaps with in-flight allocations
*
* a) Overlap not in the first cluster -> shorten this request and
* let the caller handle the rest in its next loop iteration.
*
* b) Real overlaps of two requests. Yield and restart the search
* for contiguous clusters (the situation could have changed
* while we were sleeping)
*
* c) TODO: Request starts in the same cluster as the in-flight
* allocation ends. Shorten the COW of the in-fight allocation,
* set cluster_offset to write to the same cluster and set up
* the right synchronisation between the in-flight request and
* the new one.
*/
ret = handle_dependencies(bs, start, &cur_bytes, m);
if (ret == -EAGAIN) {
/* Currently handle_dependencies() doesn't yield if we already had
* an allocation. If it did, we would have to clean up the L2Meta
* structs before starting over. */
assert(*m == NULL);
goto again;
} else if (ret < 0) {
return ret;
} else if (cur_bytes == 0) {
break;
} else {
/* handle_dependencies() may have decreased cur_bytes (shortened
* the allocations below) so that the next dependency is processed
* correctly during the next loop iteration. */
}
/*
* 2. Count contiguous COPIED clusters.
*/
ret = handle_copied(bs, start, &cluster_offset, &cur_bytes, m);
if (ret < 0) {
return ret;
} else if (ret) {
continue;
} else if (cur_bytes == 0) {
break;
}
/*
* 3. If the request still hasn't completed, allocate new clusters,
* considering any cluster_offset of steps 1c or 2.
*/
ret = handle_alloc(bs, start, &cluster_offset, &cur_bytes, m);
if (ret < 0) {
return ret;
} else if (ret) {
continue;
} else {
assert(cur_bytes == 0);
break;
}
}
*bytes -= remaining;
assert(*bytes > 0);
assert(*host_offset != 0);
return 0;
}
static int decompress_buffer(uint8_t *out_buf, int out_buf_size,
const uint8_t *buf, int buf_size)
{
z_stream strm1, *strm = &strm1;
int ret, out_len;
memset(strm, 0, sizeof(*strm));
strm->next_in = (uint8_t *)buf;
strm->avail_in = buf_size;
strm->next_out = out_buf;
strm->avail_out = out_buf_size;
ret = inflateInit2(strm, -12);
if (ret != Z_OK)
return -1;
ret = inflate(strm, Z_FINISH);
out_len = strm->next_out - out_buf;
if ((ret != Z_STREAM_END && ret != Z_BUF_ERROR) ||
out_len != out_buf_size) {
inflateEnd(strm);
return -1;
}
inflateEnd(strm);
return 0;
}
int qcow2_decompress_cluster(BlockDriverState *bs, uint64_t cluster_offset)
{
BDRVQcow2State *s = bs->opaque;
int ret, csize, nb_csectors, sector_offset;
uint64_t coffset;
coffset = cluster_offset & s->cluster_offset_mask;
if (s->cluster_cache_offset != coffset) {
nb_csectors = ((cluster_offset >> s->csize_shift) & s->csize_mask) + 1;
sector_offset = coffset & 511;
csize = nb_csectors * 512 - sector_offset;
/* Allocate buffers on first decompress operation, most images are
* uncompressed and the memory overhead can be avoided. The buffers
* are freed in .bdrv_close().
*/
if (!s->cluster_data) {
/* one more sector for decompressed data alignment */
s->cluster_data = qemu_try_blockalign(bs->file->bs,
QCOW_MAX_CRYPT_CLUSTERS * s->cluster_size + 512);
if (!s->cluster_data) {
return -ENOMEM;
}
}
if (!s->cluster_cache) {
s->cluster_cache = g_malloc(s->cluster_size);
}
BLKDBG_EVENT(bs->file, BLKDBG_READ_COMPRESSED);
ret = bdrv_read(bs->file, coffset >> 9, s->cluster_data,
nb_csectors);
if (ret < 0) {
return ret;
}
if (decompress_buffer(s->cluster_cache, s->cluster_size,
s->cluster_data + sector_offset, csize) < 0) {
return -EIO;
}
s->cluster_cache_offset = coffset;
}
return 0;
}
/*
* This discards as many clusters of nb_clusters as possible at once (i.e.
* all clusters in the same L2 table) and returns the number of discarded
* clusters.
*/
static int discard_single_l2(BlockDriverState *bs, uint64_t offset,
uint64_t nb_clusters, enum qcow2_discard_type type,
bool full_discard)
{
BDRVQcow2State *s = bs->opaque;
uint64_t *l2_table;
int l2_index;
int ret;
int i;
ret = get_cluster_table(bs, offset, &l2_table, &l2_index);
if (ret < 0) {
return ret;
}
/* Limit nb_clusters to one L2 table */
nb_clusters = MIN(nb_clusters, s->l2_size - l2_index);
assert(nb_clusters <= INT_MAX);
for (i = 0; i < nb_clusters; i++) {
uint64_t old_l2_entry;
old_l2_entry = be64_to_cpu(l2_table[l2_index + i]);
/*
* If full_discard is false, make sure that a discarded area reads back
* as zeroes for v3 images (we cannot do it for v2 without actually
* writing a zero-filled buffer). We can skip the operation if the
* cluster is already marked as zero, or if it's unallocated and we
* don't have a backing file.
*
* TODO We might want to use bdrv_block_status(bs) here, but we're
* holding s->lock, so that doesn't work today.
*
* If full_discard is true, the sector should not read back as zeroes,
* but rather fall through to the backing file.
*/
switch (qcow2_get_cluster_type(old_l2_entry)) {
case QCOW2_CLUSTER_UNALLOCATED:
if (full_discard || !bs->backing) {
continue;
}
break;
case QCOW2_CLUSTER_ZERO_PLAIN:
if (!full_discard) {
continue;
}
break;
case QCOW2_CLUSTER_ZERO_ALLOC:
case QCOW2_CLUSTER_NORMAL:
case QCOW2_CLUSTER_COMPRESSED:
break;
default:
abort();
}
/* First remove L2 entries */
qcow2_cache_entry_mark_dirty(bs, s->l2_table_cache, l2_table);
if (!full_discard && s->qcow_version >= 3) {
l2_table[l2_index + i] = cpu_to_be64(QCOW_OFLAG_ZERO);
} else {
l2_table[l2_index + i] = cpu_to_be64(0);
}
/* Then decrease the refcount */
qcow2_free_any_clusters(bs, old_l2_entry, 1, type);
}
qcow2_cache_put(bs, s->l2_table_cache, (void **) &l2_table);
return nb_clusters;
}
int qcow2_cluster_discard(BlockDriverState *bs, uint64_t offset,
uint64_t bytes, enum qcow2_discard_type type,
bool full_discard)
{
BDRVQcow2State *s = bs->opaque;
uint64_t end_offset = offset + bytes;
uint64_t nb_clusters;
int64_t cleared;
int ret;
/* Caller must pass aligned values, except at image end */
assert(QEMU_IS_ALIGNED(offset, s->cluster_size));
assert(QEMU_IS_ALIGNED(end_offset, s->cluster_size) ||
end_offset == bs->total_sectors << BDRV_SECTOR_BITS);
nb_clusters = size_to_clusters(s, bytes);
s->cache_discards = true;
/* Each L2 table is handled by its own loop iteration */
while (nb_clusters > 0) {
cleared = discard_single_l2(bs, offset, nb_clusters, type,
full_discard);
if (cleared < 0) {
ret = cleared;
goto fail;
}
nb_clusters -= cleared;
offset += (cleared * s->cluster_size);
}
ret = 0;
fail:
s->cache_discards = false;
qcow2_process_discards(bs, ret);
return ret;
}
/*
* This zeroes as many clusters of nb_clusters as possible at once (i.e.
* all clusters in the same L2 table) and returns the number of zeroed
* clusters.
*/
static int zero_single_l2(BlockDriverState *bs, uint64_t offset,
uint64_t nb_clusters, int flags)
{
BDRVQcow2State *s = bs->opaque;
uint64_t *l2_table;
int l2_index;
int ret;
int i;
bool unmap = !!(flags & BDRV_REQ_MAY_UNMAP);
ret = get_cluster_table(bs, offset, &l2_table, &l2_index);
if (ret < 0) {
return ret;
}
/* Limit nb_clusters to one L2 table */
nb_clusters = MIN(nb_clusters, s->l2_size - l2_index);
assert(nb_clusters <= INT_MAX);
for (i = 0; i < nb_clusters; i++) {
uint64_t old_offset;
QCow2ClusterType cluster_type;
old_offset = be64_to_cpu(l2_table[l2_index + i]);
/*
* Minimize L2 changes if the cluster already reads back as
* zeroes with correct allocation.
*/
cluster_type = qcow2_get_cluster_type(old_offset);
if (cluster_type == QCOW2_CLUSTER_ZERO_PLAIN ||
(cluster_type == QCOW2_CLUSTER_ZERO_ALLOC && !unmap)) {
continue;
}
qcow2_cache_entry_mark_dirty(bs, s->l2_table_cache, l2_table);
if (cluster_type == QCOW2_CLUSTER_COMPRESSED || unmap) {
l2_table[l2_index + i] = cpu_to_be64(QCOW_OFLAG_ZERO);
qcow2_free_any_clusters(bs, old_offset, 1, QCOW2_DISCARD_REQUEST);
} else {
l2_table[l2_index + i] |= cpu_to_be64(QCOW_OFLAG_ZERO);
}
}
qcow2_cache_put(bs, s->l2_table_cache, (void **) &l2_table);
return nb_clusters;
}
int qcow2_cluster_zeroize(BlockDriverState *bs, uint64_t offset,
uint64_t bytes, int flags)
{
BDRVQcow2State *s = bs->opaque;
uint64_t end_offset = offset + bytes;
uint64_t nb_clusters;
int64_t cleared;
int ret;
/* Caller must pass aligned values, except at image end */
assert(QEMU_IS_ALIGNED(offset, s->cluster_size));
assert(QEMU_IS_ALIGNED(end_offset, s->cluster_size) ||
end_offset == bs->total_sectors << BDRV_SECTOR_BITS);
/* The zero flag is only supported by version 3 and newer */
if (s->qcow_version < 3) {
return -ENOTSUP;
}
/* Each L2 table is handled by its own loop iteration */
nb_clusters = size_to_clusters(s, bytes);
s->cache_discards = true;
while (nb_clusters > 0) {
cleared = zero_single_l2(bs, offset, nb_clusters, flags);
if (cleared < 0) {
ret = cleared;
goto fail;
}
nb_clusters -= cleared;
offset += (cleared * s->cluster_size);
}
ret = 0;
fail:
s->cache_discards = false;
qcow2_process_discards(bs, ret);
return ret;
}
/*
* Expands all zero clusters in a specific L1 table (or deallocates them, for
* non-backed non-pre-allocated zero clusters).
*
* l1_entries and *visited_l1_entries are used to keep track of progress for
* status_cb(). l1_entries contains the total number of L1 entries and
* *visited_l1_entries counts all visited L1 entries.
*/
static int expand_zero_clusters_in_l1(BlockDriverState *bs, uint64_t *l1_table,
int l1_size, int64_t *visited_l1_entries,
int64_t l1_entries,
BlockDriverAmendStatusCB *status_cb,
void *cb_opaque)
{
BDRVQcow2State *s = bs->opaque;
bool is_active_l1 = (l1_table == s->l1_table);
uint64_t *l2_table = NULL;
int ret;
int i, j;
if (!is_active_l1) {
/* inactive L2 tables require a buffer to be stored in when loading
* them from disk */
l2_table = qemu_try_blockalign(bs->file->bs, s->cluster_size);
if (l2_table == NULL) {
return -ENOMEM;
}
}
for (i = 0; i < l1_size; i++) {
uint64_t l2_offset = l1_table[i] & L1E_OFFSET_MASK;
bool l2_dirty = false;
uint64_t l2_refcount;
if (!l2_offset) {
/* unallocated */
(*visited_l1_entries)++;
if (status_cb) {
status_cb(bs, *visited_l1_entries, l1_entries, cb_opaque);
}
continue;
}
if (offset_into_cluster(s, l2_offset)) {
qcow2_signal_corruption(bs, true, -1, -1, "L2 table offset %#"
PRIx64 " unaligned (L1 index: %#x)",
l2_offset, i);
ret = -EIO;
goto fail;
}
if (is_active_l1) {
/* get active L2 tables from cache */
ret = qcow2_cache_get(bs, s->l2_table_cache, l2_offset,
(void **)&l2_table);
} else {
/* load inactive L2 tables from disk */
ret = bdrv_read(bs->file, l2_offset / BDRV_SECTOR_SIZE,
(void *)l2_table, s->cluster_sectors);
}
if (ret < 0) {
goto fail;
}
ret = qcow2_get_refcount(bs, l2_offset >> s->cluster_bits,
&l2_refcount);
if (ret < 0) {
goto fail;
}
for (j = 0; j < s->l2_size; j++) {
uint64_t l2_entry = be64_to_cpu(l2_table[j]);
int64_t offset = l2_entry & L2E_OFFSET_MASK;
QCow2ClusterType cluster_type = qcow2_get_cluster_type(l2_entry);
if (cluster_type != QCOW2_CLUSTER_ZERO_PLAIN &&
cluster_type != QCOW2_CLUSTER_ZERO_ALLOC) {
continue;
}
if (cluster_type == QCOW2_CLUSTER_ZERO_PLAIN) {
if (!bs->backing) {
/* not backed; therefore we can simply deallocate the
* cluster */
l2_table[j] = 0;
l2_dirty = true;
continue;
}
offset = qcow2_alloc_clusters(bs, s->cluster_size);
if (offset < 0) {
ret = offset;
goto fail;
}
if (l2_refcount > 1) {
/* For shared L2 tables, set the refcount accordingly (it is
* already 1 and needs to be l2_refcount) */
ret = qcow2_update_cluster_refcount(bs,
offset >> s->cluster_bits,
refcount_diff(1, l2_refcount), false,
QCOW2_DISCARD_OTHER);
if (ret < 0) {
qcow2_free_clusters(bs, offset, s->cluster_size,
QCOW2_DISCARD_OTHER);
goto fail;
}
}
}
if (offset_into_cluster(s, offset)) {
qcow2_signal_corruption(bs, true, -1, -1,
"Cluster allocation offset "
"%#" PRIx64 " unaligned (L2 offset: %#"
PRIx64 ", L2 index: %#x)", offset,
l2_offset, j);
if (cluster_type == QCOW2_CLUSTER_ZERO_PLAIN) {
qcow2_free_clusters(bs, offset, s->cluster_size,
QCOW2_DISCARD_ALWAYS);
}
ret = -EIO;
goto fail;
}
ret = qcow2_pre_write_overlap_check(bs, 0, offset, s->cluster_size);
if (ret < 0) {
if (cluster_type == QCOW2_CLUSTER_ZERO_PLAIN) {
qcow2_free_clusters(bs, offset, s->cluster_size,
QCOW2_DISCARD_ALWAYS);
}
goto fail;
}
ret = bdrv_pwrite_zeroes(bs->file, offset, s->cluster_size, 0);
if (ret < 0) {
if (cluster_type == QCOW2_CLUSTER_ZERO_PLAIN) {
qcow2_free_clusters(bs, offset, s->cluster_size,
QCOW2_DISCARD_ALWAYS);
}
goto fail;
}
if (l2_refcount == 1) {
l2_table[j] = cpu_to_be64(offset | QCOW_OFLAG_COPIED);
} else {
l2_table[j] = cpu_to_be64(offset);
}
l2_dirty = true;
}
if (is_active_l1) {
if (l2_dirty) {
qcow2_cache_entry_mark_dirty(bs, s->l2_table_cache, l2_table);
qcow2_cache_depends_on_flush(s->l2_table_cache);
}
qcow2_cache_put(bs, s->l2_table_cache, (void **) &l2_table);
} else {
if (l2_dirty) {
ret = qcow2_pre_write_overlap_check(bs,
QCOW2_OL_INACTIVE_L2 | QCOW2_OL_ACTIVE_L2, l2_offset,
s->cluster_size);
if (ret < 0) {
goto fail;
}
ret = bdrv_write(bs->file, l2_offset / BDRV_SECTOR_SIZE,
(void *)l2_table, s->cluster_sectors);
if (ret < 0) {
goto fail;
}
}
}
(*visited_l1_entries)++;
if (status_cb) {
status_cb(bs, *visited_l1_entries, l1_entries, cb_opaque);
}
}
ret = 0;
fail:
if (l2_table) {
if (!is_active_l1) {
qemu_vfree(l2_table);
} else {
qcow2_cache_put(bs, s->l2_table_cache, (void **) &l2_table);
}
}
return ret;
}
/*
* For backed images, expands all zero clusters on the image. For non-backed
* images, deallocates all non-pre-allocated zero clusters (and claims the
* allocation for pre-allocated ones). This is important for downgrading to a
* qcow2 version which doesn't yet support metadata zero clusters.
*/
int qcow2_expand_zero_clusters(BlockDriverState *bs,
BlockDriverAmendStatusCB *status_cb,
void *cb_opaque)
{
BDRVQcow2State *s = bs->opaque;
uint64_t *l1_table = NULL;
int64_t l1_entries = 0, visited_l1_entries = 0;
int ret;
int i, j;
if (status_cb) {
l1_entries = s->l1_size;
for (i = 0; i < s->nb_snapshots; i++) {
l1_entries += s->snapshots[i].l1_size;
}
}
ret = expand_zero_clusters_in_l1(bs, s->l1_table, s->l1_size,
&visited_l1_entries, l1_entries,
status_cb, cb_opaque);
if (ret < 0) {
goto fail;
}
/* Inactive L1 tables may point to active L2 tables - therefore it is
* necessary to flush the L2 table cache before trying to access the L2
* tables pointed to by inactive L1 entries (else we might try to expand
* zero clusters that have already been expanded); furthermore, it is also
* necessary to empty the L2 table cache, since it may contain tables which
* are now going to be modified directly on disk, bypassing the cache.
* qcow2_cache_empty() does both for us. */
ret = qcow2_cache_empty(bs, s->l2_table_cache);
if (ret < 0) {
goto fail;
}
for (i = 0; i < s->nb_snapshots; i++) {
int l1_sectors = DIV_ROUND_UP(s->snapshots[i].l1_size *
sizeof(uint64_t), BDRV_SECTOR_SIZE);
l1_table = g_realloc(l1_table, l1_sectors * BDRV_SECTOR_SIZE);
ret = bdrv_read(bs->file,
s->snapshots[i].l1_table_offset / BDRV_SECTOR_SIZE,
(void *)l1_table, l1_sectors);
if (ret < 0) {
goto fail;
}
for (j = 0; j < s->snapshots[i].l1_size; j++) {
be64_to_cpus(&l1_table[j]);
}
ret = expand_zero_clusters_in_l1(bs, l1_table, s->snapshots[i].l1_size,
&visited_l1_entries, l1_entries,
status_cb, cb_opaque);
if (ret < 0) {
goto fail;
}
}
ret = 0;
fail:
g_free(l1_table);
return ret;
}
Reference in New Issue View Git Blame Copy Permalink