qemu/QMP/qmp-spec.txt

283 lines
9.7 KiB
Plaintext

QEMU Monitor Protocol Specification - Version 0.1
1. Introduction
===============
This document specifies the QEMU Monitor Protocol (QMP), a JSON-based protocol
which is available for applications to control QEMU at the machine-level.
To enable QMP support, QEMU has to be run in "control mode". This is done by
starting QEMU with the appropriate command-line options. Please, refer to the
QEMU manual page for more information.
2. Protocol Specification
=========================
This section details the protocol format. For the purpose of this document
"Client" is any application which is communicating with QEMU in control mode,
and "Server" is QEMU itself.
JSON data structures, when mentioned in this document, are always in the
following format:
json-DATA-STRUCTURE-NAME
Where DATA-STRUCTURE-NAME is any valid JSON data structure, as defined by
the JSON standard:
http://www.ietf.org/rfc/rfc4627.txt
For convenience, json-object members and json-array elements mentioned in
this document will be in a certain order. However, in real protocol usage
they can be in ANY order, thus no particular order should be assumed.
2.1 General Definitions
-----------------------
2.1.1 All interactions transmitted by the Server are json-objects, always
terminating with CRLF
2.1.2 All json-objects members are mandatory when not specified otherwise
2.2 Server Greeting
-------------------
Right when connected the Server will issue a greeting message, which signals
that the connection has been successfully established and that the Server is
ready for capabilities negotiation (for more information refer to section
'4. Capabilities Negotiation').
The format is:
{ "QMP": { "version": json-object, "capabilities": json-array } }
Where,
- The "version" member contains the Server's version information (the format
is the same of the 'query-version' command)
- The "capabilities" member specify the availability of features beyond the
baseline specification
2.3 Issuing Commands
--------------------
The format for command execution is:
{ "execute": json-string, "arguments": json-object, "id": json-value }
Where,
- The "execute" member identifies the command to be executed by the Server
- The "arguments" member is used to pass any arguments required for the
execution of the command, it is optional when no arguments are required
- The "id" member is a transaction identification associated with the
command execution, it is optional and will be part of the response if
provided
2.4 Commands Responses
----------------------
There are two possible responses which the Server will issue as the result
of a command execution: success or error.
2.4.1 success
-------------
The success response is issued when the command execution has finished
without errors.
The format is:
{ "return": json-object, "id": json-value }
Where,
- The "return" member contains the command returned data, which is defined
in a per-command basis or an empty json-object if the command does not
return data
- The "id" member contains the transaction identification associated
with the command execution (if issued by the Client)
2.4.2 error
-----------
The error response is issued when the command execution could not be
completed because of an error condition.
The format is:
{ "error": { "class": json-string, "desc": json-string }, "id": json-value }
Where,
- The "class" member contains the error class name (eg. "GenericError")
- The "desc" member is a human-readable error message. Clients should
not attempt to parse this message.
- The "id" member contains the transaction identification associated with
the command execution (if issued by the Client)
NOTE: Some errors can occur before the Server is able to read the "id" member,
in these cases the "id" member will not be part of the error response, even
if provided by the client.
2.5 Asynchronous events
-----------------------
As a result of state changes, the Server may send messages unilaterally
to the Client at any time. They are called 'asynchronous events'.
The format is:
{ "event": json-string, "data": json-object,
"timestamp": { "seconds": json-number, "microseconds": json-number } }
Where,
- The "event" member contains the event's name
- The "data" member contains event specific data, which is defined in a
per-event basis, it is optional
- The "timestamp" member contains the exact time of when the event occurred
in the Server. It is a fixed json-object with time in seconds and
microseconds
For a listing of supported asynchronous events, please, refer to the
qmp-events.txt file.
3. QMP Examples
===============
This section provides some examples of real QMP usage, in all of them
'C' stands for 'Client' and 'S' stands for 'Server'.
3.1 Server greeting
-------------------
S: {"QMP": {"version": {"qemu": "0.12.50", "package": ""}, "capabilities": []}}
3.2 Simple 'stop' execution
---------------------------
C: { "execute": "stop" }
S: {"return": {}}
3.3 KVM information
-------------------
C: { "execute": "query-kvm", "id": "example" }
S: {"return": {"enabled": true, "present": true}, "id": "example"}
3.4 Parsing error
------------------
C: { "execute": }
S: {"error": {"class": "GenericError", "desc": "Invalid JSON syntax" } }
3.5 Powerdown event
-------------------
S: {"timestamp": {"seconds": 1258551470, "microseconds": 802384}, "event":
"POWERDOWN"}
4. Capabilities Negotiation
----------------------------
When a Client successfully establishes a connection, the Server is in
Capabilities Negotiation mode.
In this mode only the 'qmp_capabilities' command is allowed to run, all
other commands will return the CommandNotFound error. Asynchronous messages
are not delivered either.
Clients should use the 'qmp_capabilities' command to enable capabilities
advertised in the Server's greeting (section '2.2 Server Greeting') they
support.
When the 'qmp_capabilities' command is issued, and if it does not return an
error, the Server enters in Command mode where capabilities changes take
effect, all commands (except 'qmp_capabilities') are allowed and asynchronous
messages are delivered.
5 Compatibility Considerations
------------------------------
All protocol changes or new features which modify the protocol format in an
incompatible way are disabled by default and will be advertised by the
capabilities array (section '2.2 Server Greeting'). Thus, Clients can check
that array and enable the capabilities they support.
The QMP Server performs a type check on the arguments to a command. It
generates an error if a value does not have the expected type for its
key, or if it does not understand a key that the Client included. The
strictness of the Server catches wrong assumptions of Clients about
the Server's schema. Clients can assume that, when such validation
errors occur, they will be reported before the command generated any
side effect.
However, Clients must not assume any particular:
- Length of json-arrays
- Size of json-objects; in particular, future versions of QEMU may add
new keys and Clients should be able to ignore them.
- Order of json-object members or json-array elements
- Amount of errors generated by a command, that is, new errors can be added
to any existing command in newer versions of the Server
Of course, the Server does guarantee to send valid JSON. But apart from
this, a Client should be "conservative in what they send, and liberal in
what they accept".
6. Downstream extension of QMP
------------------------------
We recommend that downstream consumers of QEMU do *not* modify QMP.
Management tools should be able to support both upstream and downstream
versions of QMP without special logic, and downstream extensions are
inherently at odds with that.
However, we recognize that it is sometimes impossible for downstreams to
avoid modifying QMP. Both upstream and downstream need to take care to
preserve long-term compatibility and interoperability.
To help with that, QMP reserves JSON object member names beginning with
'__' (double underscore) for downstream use ("downstream names"). This
means upstream will never use any downstream names for its commands,
arguments, errors, asynchronous events, and so forth.
Any new names downstream wishes to add must begin with '__'. To
ensure compatibility with other downstreams, it is strongly
recommended that you prefix your downstram names with '__RFQDN_' where
RFQDN is a valid, reverse fully qualified domain name which you
control. For example, a qemu-kvm specific monitor command would be:
(qemu) __org.linux-kvm_enable_irqchip
Downstream must not change the server greeting (section 2.2) other than
to offer additional capabilities. But see below for why even that is
discouraged.
Section '5 Compatibility Considerations' applies to downstream as well
as to upstream, obviously. It follows that downstream must behave
exactly like upstream for any input not containing members with
downstream names ("downstream members"), except it may add members
with downstream names to its output.
Thus, a client should not be able to distinguish downstream from
upstream as long as it doesn't send input with downstream members, and
properly ignores any downstream members in the output it receives.
Advice on downstream modifications:
1. Introducing new commands is okay. If you want to extend an existing
command, consider introducing a new one with the new behaviour
instead.
2. Introducing new asynchronous messages is okay. If you want to extend
an existing message, consider adding a new one instead.
3. Introducing new errors for use in new commands is okay. Adding new
errors to existing commands counts as extension, so 1. applies.
4. New capabilities are strongly discouraged. Capabilities are for
evolving the basic protocol, and multiple diverging basic protocol
dialects are most undesirable.