qemu/hw/virtio/virtio-balloon.c
Vladimir Sementsov-Ogievskiy 2b75f84823 balloon: Use only 'pc-dimm' type dimm for ballooning
For now there are only two dimm's: pc-dimm and nvdimm. This patch is
actually needed to disable ballooning on nvdimm. But, to avoid future
bugs, instead of disallowing nvdimm, we allow only pc-dimm. So, if
someone adds new dimm which should be balloon-able, then this ability
should be explicitly specified here.

Why ballooning for nvdimm should be disabled for now:

NVDIMM for now is planned to use as a backing store for DAX filesystem
in the guest and thus this memory is excluded from guest memory
management and LRUs.

In this case libvirt running QEMU along with configured balloon almost
immediately inflates balloon and effectively kill the guest as
qemu counts nvdimm as part of the ram.

Counting dimm devices as part of the ram for ballooning was started from
commit 463756d03:
 virtio-balloon: Fix balloon not working correctly when hotplug memory

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-02-25 13:14:18 +02:00

510 lines
14 KiB
C

/*
* Virtio Balloon Device
*
* Copyright IBM, Corp. 2008
* Copyright (C) 2011 Red Hat, Inc.
* Copyright (C) 2011 Amit Shah <amit.shah@redhat.com>
*
* Authors:
* Anthony Liguori <aliguori@us.ibm.com>
*
* This work is licensed under the terms of the GNU GPL, version 2. See
* the COPYING file in the top-level directory.
*
*/
#include "qemu/osdep.h"
#include "qemu/iov.h"
#include "qemu/timer.h"
#include "qemu-common.h"
#include "hw/virtio/virtio.h"
#include "hw/i386/pc.h"
#include "cpu.h"
#include "sysemu/balloon.h"
#include "hw/virtio/virtio-balloon.h"
#include "sysemu/kvm.h"
#include "exec/address-spaces.h"
#include "qapi/visitor.h"
#include "qapi-event.h"
#include "trace.h"
#if defined(__linux__)
#include <sys/mman.h>
#endif
#include "hw/virtio/virtio-bus.h"
#include "hw/virtio/virtio-access.h"
static void balloon_page(void *addr, int deflate)
{
#if defined(__linux__)
if (!qemu_balloon_is_inhibited() && (!kvm_enabled() ||
kvm_has_sync_mmu())) {
qemu_madvise(addr, TARGET_PAGE_SIZE,
deflate ? QEMU_MADV_WILLNEED : QEMU_MADV_DONTNEED);
}
#endif
}
static const char *balloon_stat_names[] = {
[VIRTIO_BALLOON_S_SWAP_IN] = "stat-swap-in",
[VIRTIO_BALLOON_S_SWAP_OUT] = "stat-swap-out",
[VIRTIO_BALLOON_S_MAJFLT] = "stat-major-faults",
[VIRTIO_BALLOON_S_MINFLT] = "stat-minor-faults",
[VIRTIO_BALLOON_S_MEMFREE] = "stat-free-memory",
[VIRTIO_BALLOON_S_MEMTOT] = "stat-total-memory",
[VIRTIO_BALLOON_S_NR] = NULL
};
/*
* reset_stats - Mark all items in the stats array as unset
*
* This function needs to be called at device initialization and before
* updating to a set of newly-generated stats. This will ensure that no
* stale values stick around in case the guest reports a subset of the supported
* statistics.
*/
static inline void reset_stats(VirtIOBalloon *dev)
{
int i;
for (i = 0; i < VIRTIO_BALLOON_S_NR; dev->stats[i++] = -1);
}
static bool balloon_stats_supported(const VirtIOBalloon *s)
{
VirtIODevice *vdev = VIRTIO_DEVICE(s);
return virtio_vdev_has_feature(vdev, VIRTIO_BALLOON_F_STATS_VQ);
}
static bool balloon_stats_enabled(const VirtIOBalloon *s)
{
return s->stats_poll_interval > 0;
}
static void balloon_stats_destroy_timer(VirtIOBalloon *s)
{
if (balloon_stats_enabled(s)) {
timer_del(s->stats_timer);
timer_free(s->stats_timer);
s->stats_timer = NULL;
s->stats_poll_interval = 0;
}
}
static void balloon_stats_change_timer(VirtIOBalloon *s, int64_t secs)
{
timer_mod(s->stats_timer, qemu_clock_get_ms(QEMU_CLOCK_VIRTUAL) + secs * 1000);
}
static void balloon_stats_poll_cb(void *opaque)
{
VirtIOBalloon *s = opaque;
VirtIODevice *vdev = VIRTIO_DEVICE(s);
if (!balloon_stats_supported(s)) {
/* re-schedule */
balloon_stats_change_timer(s, s->stats_poll_interval);
return;
}
virtqueue_push(s->svq, s->stats_vq_elem, s->stats_vq_offset);
virtio_notify(vdev, s->svq);
g_free(s->stats_vq_elem);
s->stats_vq_elem = NULL;
}
static void balloon_stats_get_all(Object *obj, Visitor *v, const char *name,
void *opaque, Error **errp)
{
Error *err = NULL;
VirtIOBalloon *s = opaque;
int i;
visit_start_struct(v, name, NULL, 0, &err);
if (err) {
goto out;
}
visit_type_int(v, "last-update", &s->stats_last_update, &err);
if (err) {
goto out_end;
}
visit_start_struct(v, "stats", NULL, 0, &err);
if (err) {
goto out_end;
}
for (i = 0; i < VIRTIO_BALLOON_S_NR; i++) {
visit_type_uint64(v, balloon_stat_names[i], &s->stats[i], &err);
if (err) {
break;
}
}
error_propagate(errp, err);
err = NULL;
visit_end_struct(v, &err);
out_end:
error_propagate(errp, err);
err = NULL;
visit_end_struct(v, &err);
out:
error_propagate(errp, err);
}
static void balloon_stats_get_poll_interval(Object *obj, Visitor *v,
const char *name, void *opaque,
Error **errp)
{
VirtIOBalloon *s = opaque;
visit_type_int(v, name, &s->stats_poll_interval, errp);
}
static void balloon_stats_set_poll_interval(Object *obj, Visitor *v,
const char *name, void *opaque,
Error **errp)
{
VirtIOBalloon *s = opaque;
Error *local_err = NULL;
int64_t value;
visit_type_int(v, name, &value, &local_err);
if (local_err) {
error_propagate(errp, local_err);
return;
}
if (value < 0) {
error_setg(errp, "timer value must be greater than zero");
return;
}
if (value > UINT32_MAX) {
error_setg(errp, "timer value is too big");
return;
}
if (value == s->stats_poll_interval) {
return;
}
if (value == 0) {
/* timer=0 disables the timer */
balloon_stats_destroy_timer(s);
return;
}
if (balloon_stats_enabled(s)) {
/* timer interval change */
s->stats_poll_interval = value;
balloon_stats_change_timer(s, value);
return;
}
/* create a new timer */
g_assert(s->stats_timer == NULL);
s->stats_timer = timer_new_ms(QEMU_CLOCK_VIRTUAL, balloon_stats_poll_cb, s);
s->stats_poll_interval = value;
balloon_stats_change_timer(s, 0);
}
static void virtio_balloon_handle_output(VirtIODevice *vdev, VirtQueue *vq)
{
VirtIOBalloon *s = VIRTIO_BALLOON(vdev);
VirtQueueElement *elem;
MemoryRegionSection section;
for (;;) {
size_t offset = 0;
uint32_t pfn;
elem = virtqueue_pop(vq, sizeof(VirtQueueElement));
if (!elem) {
return;
}
while (iov_to_buf(elem->out_sg, elem->out_num, offset, &pfn, 4) == 4) {
ram_addr_t pa;
ram_addr_t addr;
int p = virtio_ldl_p(vdev, &pfn);
pa = (ram_addr_t) p << VIRTIO_BALLOON_PFN_SHIFT;
offset += 4;
/* FIXME: remove get_system_memory(), but how? */
section = memory_region_find(get_system_memory(), pa, 1);
if (!int128_nz(section.size) || !memory_region_is_ram(section.mr))
continue;
trace_virtio_balloon_handle_output(memory_region_name(section.mr),
pa);
/* Using memory_region_get_ram_ptr is bending the rules a bit, but
should be OK because we only want a single page. */
addr = section.offset_within_region;
balloon_page(memory_region_get_ram_ptr(section.mr) + addr,
!!(vq == s->dvq));
memory_region_unref(section.mr);
}
virtqueue_push(vq, elem, offset);
virtio_notify(vdev, vq);
g_free(elem);
}
}
static void virtio_balloon_receive_stats(VirtIODevice *vdev, VirtQueue *vq)
{
VirtIOBalloon *s = VIRTIO_BALLOON(vdev);
VirtQueueElement *elem;
VirtIOBalloonStat stat;
size_t offset = 0;
qemu_timeval tv;
s->stats_vq_elem = elem = virtqueue_pop(vq, sizeof(VirtQueueElement));
if (!elem) {
goto out;
}
/* Initialize the stats to get rid of any stale values. This is only
* needed to handle the case where a guest supports fewer stats than it
* used to (ie. it has booted into an old kernel).
*/
reset_stats(s);
while (iov_to_buf(elem->out_sg, elem->out_num, offset, &stat, sizeof(stat))
== sizeof(stat)) {
uint16_t tag = virtio_tswap16(vdev, stat.tag);
uint64_t val = virtio_tswap64(vdev, stat.val);
offset += sizeof(stat);
if (tag < VIRTIO_BALLOON_S_NR)
s->stats[tag] = val;
}
s->stats_vq_offset = offset;
if (qemu_gettimeofday(&tv) < 0) {
fprintf(stderr, "warning: %s: failed to get time of day\n", __func__);
goto out;
}
s->stats_last_update = tv.tv_sec;
out:
if (balloon_stats_enabled(s)) {
balloon_stats_change_timer(s, s->stats_poll_interval);
}
}
static void virtio_balloon_get_config(VirtIODevice *vdev, uint8_t *config_data)
{
VirtIOBalloon *dev = VIRTIO_BALLOON(vdev);
struct virtio_balloon_config config;
config.num_pages = cpu_to_le32(dev->num_pages);
config.actual = cpu_to_le32(dev->actual);
trace_virtio_balloon_get_config(config.num_pages, config.actual);
memcpy(config_data, &config, sizeof(struct virtio_balloon_config));
}
static int build_dimm_list(Object *obj, void *opaque)
{
GSList **list = opaque;
if (object_dynamic_cast(obj, TYPE_PC_DIMM)) {
DeviceState *dev = DEVICE(obj);
if (dev->realized) { /* only realized DIMMs matter */
*list = g_slist_prepend(*list, dev);
}
}
object_child_foreach(obj, build_dimm_list, opaque);
return 0;
}
static ram_addr_t get_current_ram_size(void)
{
GSList *list = NULL, *item;
ram_addr_t size = ram_size;
build_dimm_list(qdev_get_machine(), &list);
for (item = list; item; item = g_slist_next(item)) {
Object *obj = OBJECT(item->data);
if (!strcmp(object_get_typename(obj), TYPE_PC_DIMM)) {
size += object_property_get_int(obj, PC_DIMM_SIZE_PROP,
&error_abort);
}
}
g_slist_free(list);
return size;
}
static void virtio_balloon_set_config(VirtIODevice *vdev,
const uint8_t *config_data)
{
VirtIOBalloon *dev = VIRTIO_BALLOON(vdev);
struct virtio_balloon_config config;
uint32_t oldactual = dev->actual;
ram_addr_t vm_ram_size = get_current_ram_size();
memcpy(&config, config_data, sizeof(struct virtio_balloon_config));
dev->actual = le32_to_cpu(config.actual);
if (dev->actual != oldactual) {
qapi_event_send_balloon_change(vm_ram_size -
((ram_addr_t) dev->actual << VIRTIO_BALLOON_PFN_SHIFT),
&error_abort);
}
trace_virtio_balloon_set_config(dev->actual, oldactual);
}
static uint64_t virtio_balloon_get_features(VirtIODevice *vdev, uint64_t f,
Error **errp)
{
VirtIOBalloon *dev = VIRTIO_BALLOON(vdev);
f |= dev->host_features;
virtio_add_feature(&f, VIRTIO_BALLOON_F_STATS_VQ);
return f;
}
static void virtio_balloon_stat(void *opaque, BalloonInfo *info)
{
VirtIOBalloon *dev = opaque;
info->actual = get_current_ram_size() - ((uint64_t) dev->actual <<
VIRTIO_BALLOON_PFN_SHIFT);
}
static void virtio_balloon_to_target(void *opaque, ram_addr_t target)
{
VirtIOBalloon *dev = VIRTIO_BALLOON(opaque);
VirtIODevice *vdev = VIRTIO_DEVICE(dev);
ram_addr_t vm_ram_size = get_current_ram_size();
if (target > vm_ram_size) {
target = vm_ram_size;
}
if (target) {
dev->num_pages = (vm_ram_size - target) >> VIRTIO_BALLOON_PFN_SHIFT;
virtio_notify_config(vdev);
}
trace_virtio_balloon_to_target(target, dev->num_pages);
}
static void virtio_balloon_save(QEMUFile *f, void *opaque)
{
virtio_save(VIRTIO_DEVICE(opaque), f);
}
static void virtio_balloon_save_device(VirtIODevice *vdev, QEMUFile *f)
{
VirtIOBalloon *s = VIRTIO_BALLOON(vdev);
qemu_put_be32(f, s->num_pages);
qemu_put_be32(f, s->actual);
}
static int virtio_balloon_load(QEMUFile *f, void *opaque, int version_id)
{
if (version_id != 1)
return -EINVAL;
return virtio_load(VIRTIO_DEVICE(opaque), f, version_id);
}
static int virtio_balloon_load_device(VirtIODevice *vdev, QEMUFile *f,
int version_id)
{
VirtIOBalloon *s = VIRTIO_BALLOON(vdev);
s->num_pages = qemu_get_be32(f);
s->actual = qemu_get_be32(f);
return 0;
}
static void virtio_balloon_device_realize(DeviceState *dev, Error **errp)
{
VirtIODevice *vdev = VIRTIO_DEVICE(dev);
VirtIOBalloon *s = VIRTIO_BALLOON(dev);
int ret;
virtio_init(vdev, "virtio-balloon", VIRTIO_ID_BALLOON,
sizeof(struct virtio_balloon_config));
ret = qemu_add_balloon_handler(virtio_balloon_to_target,
virtio_balloon_stat, s);
if (ret < 0) {
error_setg(errp, "Only one balloon device is supported");
virtio_cleanup(vdev);
return;
}
s->ivq = virtio_add_queue(vdev, 128, virtio_balloon_handle_output);
s->dvq = virtio_add_queue(vdev, 128, virtio_balloon_handle_output);
s->svq = virtio_add_queue(vdev, 128, virtio_balloon_receive_stats);
reset_stats(s);
register_savevm(dev, "virtio-balloon", -1, 1,
virtio_balloon_save, virtio_balloon_load, s);
}
static void virtio_balloon_device_unrealize(DeviceState *dev, Error **errp)
{
VirtIODevice *vdev = VIRTIO_DEVICE(dev);
VirtIOBalloon *s = VIRTIO_BALLOON(dev);
balloon_stats_destroy_timer(s);
qemu_remove_balloon_handler(s);
unregister_savevm(dev, "virtio-balloon", s);
virtio_cleanup(vdev);
}
static void virtio_balloon_instance_init(Object *obj)
{
VirtIOBalloon *s = VIRTIO_BALLOON(obj);
object_property_add(obj, "guest-stats", "guest statistics",
balloon_stats_get_all, NULL, NULL, s, NULL);
object_property_add(obj, "guest-stats-polling-interval", "int",
balloon_stats_get_poll_interval,
balloon_stats_set_poll_interval,
NULL, s, NULL);
}
static Property virtio_balloon_properties[] = {
DEFINE_PROP_BIT("deflate-on-oom", VirtIOBalloon, host_features,
VIRTIO_BALLOON_F_DEFLATE_ON_OOM, false),
DEFINE_PROP_END_OF_LIST(),
};
static void virtio_balloon_class_init(ObjectClass *klass, void *data)
{
DeviceClass *dc = DEVICE_CLASS(klass);
VirtioDeviceClass *vdc = VIRTIO_DEVICE_CLASS(klass);
dc->props = virtio_balloon_properties;
set_bit(DEVICE_CATEGORY_MISC, dc->categories);
vdc->realize = virtio_balloon_device_realize;
vdc->unrealize = virtio_balloon_device_unrealize;
vdc->get_config = virtio_balloon_get_config;
vdc->set_config = virtio_balloon_set_config;
vdc->get_features = virtio_balloon_get_features;
vdc->save = virtio_balloon_save_device;
vdc->load = virtio_balloon_load_device;
}
static const TypeInfo virtio_balloon_info = {
.name = TYPE_VIRTIO_BALLOON,
.parent = TYPE_VIRTIO_DEVICE,
.instance_size = sizeof(VirtIOBalloon),
.instance_init = virtio_balloon_instance_init,
.class_init = virtio_balloon_class_init,
};
static void virtio_register_types(void)
{
type_register_static(&virtio_balloon_info);
}
type_init(virtio_register_types)