qemu/subprojects/libvhost-user/libvhost-user.h
Manos Pitsidianakis f8ed3648b5 vhost-user: fully use new backend/frontend naming
Slave/master nomenclature was replaced with backend/frontend in commit
1fc19b6527 ("vhost-user: Adopt new backend naming")

This patch replaces all remaining uses of master and slave in the
codebase.

Signed-off-by: Emmanouil Pitsidianakis <manos.pitsidianakis@linaro.org>
Message-Id: <20230613080849.2115347-1-manos.pitsidianakis@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
2023-06-26 09:50:00 -04:00

706 lines
19 KiB
C

/*
* Vhost User library
*
* Copyright (c) 2016 Red Hat, Inc.
*
* Authors:
* Victor Kaplansky <victork@redhat.com>
* Marc-André Lureau <mlureau@redhat.com>
*
* This work is licensed under the terms of the GNU GPL, version 2 or
* later. See the COPYING file in the top-level directory.
*/
#ifndef LIBVHOST_USER_H
#define LIBVHOST_USER_H
#include <stdint.h>
#include <stdbool.h>
#include <stddef.h>
#include <poll.h>
#include <linux/vhost.h>
#include <pthread.h>
#include "standard-headers/linux/virtio_ring.h"
/* Based on qemu/hw/virtio/vhost-user.c */
#define VHOST_USER_F_PROTOCOL_FEATURES 30
#define VHOST_LOG_PAGE 4096
#define VIRTQUEUE_MAX_SIZE 1024
#define VHOST_MEMORY_BASELINE_NREGIONS 8
/*
* Set a reasonable maximum number of ram slots, which will be supported by
* any architecture.
*/
#define VHOST_USER_MAX_RAM_SLOTS 32
#define VHOST_USER_HDR_SIZE offsetof(VhostUserMsg, payload.u64)
typedef enum VhostSetConfigType {
VHOST_SET_CONFIG_TYPE_FRONTEND = 0,
VHOST_SET_CONFIG_TYPE_MIGRATION = 1,
} VhostSetConfigType;
/*
* Maximum size of virtio device config space
*/
#define VHOST_USER_MAX_CONFIG_SIZE 256
enum VhostUserProtocolFeature {
VHOST_USER_PROTOCOL_F_MQ = 0,
VHOST_USER_PROTOCOL_F_LOG_SHMFD = 1,
VHOST_USER_PROTOCOL_F_RARP = 2,
VHOST_USER_PROTOCOL_F_REPLY_ACK = 3,
VHOST_USER_PROTOCOL_F_NET_MTU = 4,
VHOST_USER_PROTOCOL_F_BACKEND_REQ = 5,
VHOST_USER_PROTOCOL_F_CROSS_ENDIAN = 6,
VHOST_USER_PROTOCOL_F_CRYPTO_SESSION = 7,
VHOST_USER_PROTOCOL_F_PAGEFAULT = 8,
VHOST_USER_PROTOCOL_F_CONFIG = 9,
VHOST_USER_PROTOCOL_F_BACKEND_SEND_FD = 10,
VHOST_USER_PROTOCOL_F_HOST_NOTIFIER = 11,
VHOST_USER_PROTOCOL_F_INFLIGHT_SHMFD = 12,
VHOST_USER_PROTOCOL_F_INBAND_NOTIFICATIONS = 14,
VHOST_USER_PROTOCOL_F_CONFIGURE_MEM_SLOTS = 15,
VHOST_USER_PROTOCOL_F_MAX
};
#define VHOST_USER_PROTOCOL_FEATURE_MASK ((1 << VHOST_USER_PROTOCOL_F_MAX) - 1)
typedef enum VhostUserRequest {
VHOST_USER_NONE = 0,
VHOST_USER_GET_FEATURES = 1,
VHOST_USER_SET_FEATURES = 2,
VHOST_USER_SET_OWNER = 3,
VHOST_USER_RESET_OWNER = 4,
VHOST_USER_SET_MEM_TABLE = 5,
VHOST_USER_SET_LOG_BASE = 6,
VHOST_USER_SET_LOG_FD = 7,
VHOST_USER_SET_VRING_NUM = 8,
VHOST_USER_SET_VRING_ADDR = 9,
VHOST_USER_SET_VRING_BASE = 10,
VHOST_USER_GET_VRING_BASE = 11,
VHOST_USER_SET_VRING_KICK = 12,
VHOST_USER_SET_VRING_CALL = 13,
VHOST_USER_SET_VRING_ERR = 14,
VHOST_USER_GET_PROTOCOL_FEATURES = 15,
VHOST_USER_SET_PROTOCOL_FEATURES = 16,
VHOST_USER_GET_QUEUE_NUM = 17,
VHOST_USER_SET_VRING_ENABLE = 18,
VHOST_USER_SEND_RARP = 19,
VHOST_USER_NET_SET_MTU = 20,
VHOST_USER_SET_BACKEND_REQ_FD = 21,
VHOST_USER_IOTLB_MSG = 22,
VHOST_USER_SET_VRING_ENDIAN = 23,
VHOST_USER_GET_CONFIG = 24,
VHOST_USER_SET_CONFIG = 25,
VHOST_USER_CREATE_CRYPTO_SESSION = 26,
VHOST_USER_CLOSE_CRYPTO_SESSION = 27,
VHOST_USER_POSTCOPY_ADVISE = 28,
VHOST_USER_POSTCOPY_LISTEN = 29,
VHOST_USER_POSTCOPY_END = 30,
VHOST_USER_GET_INFLIGHT_FD = 31,
VHOST_USER_SET_INFLIGHT_FD = 32,
VHOST_USER_GPU_SET_SOCKET = 33,
VHOST_USER_VRING_KICK = 35,
VHOST_USER_GET_MAX_MEM_SLOTS = 36,
VHOST_USER_ADD_MEM_REG = 37,
VHOST_USER_REM_MEM_REG = 38,
VHOST_USER_MAX
} VhostUserRequest;
typedef enum VhostUserBackendRequest {
VHOST_USER_BACKEND_NONE = 0,
VHOST_USER_BACKEND_IOTLB_MSG = 1,
VHOST_USER_BACKEND_CONFIG_CHANGE_MSG = 2,
VHOST_USER_BACKEND_VRING_HOST_NOTIFIER_MSG = 3,
VHOST_USER_BACKEND_VRING_CALL = 4,
VHOST_USER_BACKEND_VRING_ERR = 5,
VHOST_USER_BACKEND_MAX
} VhostUserBackendRequest;
typedef struct VhostUserMemoryRegion {
uint64_t guest_phys_addr;
uint64_t memory_size;
uint64_t userspace_addr;
uint64_t mmap_offset;
} VhostUserMemoryRegion;
#define VHOST_USER_MEM_REG_SIZE (sizeof(VhostUserMemoryRegion))
typedef struct VhostUserMemory {
uint32_t nregions;
uint32_t padding;
VhostUserMemoryRegion regions[VHOST_MEMORY_BASELINE_NREGIONS];
} VhostUserMemory;
typedef struct VhostUserMemRegMsg {
uint64_t padding;
VhostUserMemoryRegion region;
} VhostUserMemRegMsg;
typedef struct VhostUserLog {
uint64_t mmap_size;
uint64_t mmap_offset;
} VhostUserLog;
typedef struct VhostUserConfig {
uint32_t offset;
uint32_t size;
uint32_t flags;
uint8_t region[VHOST_USER_MAX_CONFIG_SIZE];
} VhostUserConfig;
static VhostUserConfig c __attribute__ ((unused));
#define VHOST_USER_CONFIG_HDR_SIZE (sizeof(c.offset) \
+ sizeof(c.size) \
+ sizeof(c.flags))
typedef struct VhostUserVringArea {
uint64_t u64;
uint64_t size;
uint64_t offset;
} VhostUserVringArea;
typedef struct VhostUserInflight {
uint64_t mmap_size;
uint64_t mmap_offset;
uint16_t num_queues;
uint16_t queue_size;
} VhostUserInflight;
#if defined(_WIN32) && (defined(__x86_64__) || defined(__i386__))
# define VU_PACKED __attribute__((gcc_struct, packed))
#else
# define VU_PACKED __attribute__((packed))
#endif
typedef struct VhostUserMsg {
int request;
#define VHOST_USER_VERSION_MASK (0x3)
#define VHOST_USER_REPLY_MASK (0x1 << 2)
#define VHOST_USER_NEED_REPLY_MASK (0x1 << 3)
uint32_t flags;
uint32_t size; /* the following payload size */
union {
#define VHOST_USER_VRING_IDX_MASK (0xff)
#define VHOST_USER_VRING_NOFD_MASK (0x1 << 8)
uint64_t u64;
struct vhost_vring_state state;
struct vhost_vring_addr addr;
VhostUserMemory memory;
VhostUserMemRegMsg memreg;
VhostUserLog log;
VhostUserConfig config;
VhostUserVringArea area;
VhostUserInflight inflight;
} payload;
int fds[VHOST_MEMORY_BASELINE_NREGIONS];
int fd_num;
uint8_t *data;
} VU_PACKED VhostUserMsg;
typedef struct VuDevRegion {
/* Guest Physical address. */
uint64_t gpa;
/* Memory region size. */
uint64_t size;
/* QEMU virtual address (userspace). */
uint64_t qva;
/* Starting offset in our mmaped space. */
uint64_t mmap_offset;
/* Start address of mmaped space. */
uint64_t mmap_addr;
} VuDevRegion;
typedef struct VuDev VuDev;
typedef uint64_t (*vu_get_features_cb) (VuDev *dev);
typedef void (*vu_set_features_cb) (VuDev *dev, uint64_t features);
typedef int (*vu_process_msg_cb) (VuDev *dev, VhostUserMsg *vmsg,
int *do_reply);
typedef bool (*vu_read_msg_cb) (VuDev *dev, int sock, VhostUserMsg *vmsg);
typedef void (*vu_queue_set_started_cb) (VuDev *dev, int qidx, bool started);
typedef bool (*vu_queue_is_processed_in_order_cb) (VuDev *dev, int qidx);
typedef int (*vu_get_config_cb) (VuDev *dev, uint8_t *config, uint32_t len);
typedef int (*vu_set_config_cb) (VuDev *dev, const uint8_t *data,
uint32_t offset, uint32_t size,
uint32_t flags);
typedef struct VuDevIface {
/* called by VHOST_USER_GET_FEATURES to get the features bitmask */
vu_get_features_cb get_features;
/* enable vhost implementation features */
vu_set_features_cb set_features;
/* get the protocol feature bitmask from the underlying vhost
* implementation */
vu_get_features_cb get_protocol_features;
/* enable protocol features in the underlying vhost implementation. */
vu_set_features_cb set_protocol_features;
/* process_msg is called for each vhost-user message received */
/* skip libvhost-user processing if return value != 0 */
vu_process_msg_cb process_msg;
/* tells when queues can be processed */
vu_queue_set_started_cb queue_set_started;
/*
* If the queue is processed in order, in which case it will be
* resumed to vring.used->idx. This can help to support resuming
* on unmanaged exit/crash.
*/
vu_queue_is_processed_in_order_cb queue_is_processed_in_order;
/* get the config space of the device */
vu_get_config_cb get_config;
/* set the config space of the device */
vu_set_config_cb set_config;
} VuDevIface;
typedef void (*vu_queue_handler_cb) (VuDev *dev, int qidx);
typedef struct VuRing {
unsigned int num;
struct vring_desc *desc;
struct vring_avail *avail;
struct vring_used *used;
uint64_t log_guest_addr;
uint32_t flags;
} VuRing;
typedef struct VuDescStateSplit {
/* Indicate whether this descriptor is inflight or not.
* Only available for head-descriptor. */
uint8_t inflight;
/* Padding */
uint8_t padding[5];
/* Maintain a list for the last batch of used descriptors.
* Only available when batching is used for submitting */
uint16_t next;
/* Used to preserve the order of fetching available descriptors.
* Only available for head-descriptor. */
uint64_t counter;
} VuDescStateSplit;
typedef struct VuVirtqInflight {
/* The feature flags of this region. Now it's initialized to 0. */
uint64_t features;
/* The version of this region. It's 1 currently.
* Zero value indicates a vm reset happened. */
uint16_t version;
/*
* The size of VuDescStateSplit array. It's equal to the virtqueue size.
* Backend could get it from queue size field of VhostUserInflight.
*/
uint16_t desc_num;
/* The head of list that track the last batch of used descriptors. */
uint16_t last_batch_head;
/* Storing the idx value of used ring */
uint16_t used_idx;
/* Used to track the state of each descriptor in descriptor table */
VuDescStateSplit desc[];
} VuVirtqInflight;
typedef struct VuVirtqInflightDesc {
uint16_t index;
uint64_t counter;
} VuVirtqInflightDesc;
typedef struct VuVirtq {
VuRing vring;
VuVirtqInflight *inflight;
VuVirtqInflightDesc *resubmit_list;
uint16_t resubmit_num;
uint64_t counter;
/* Next head to pop */
uint16_t last_avail_idx;
/* Last avail_idx read from VQ. */
uint16_t shadow_avail_idx;
uint16_t used_idx;
/* Last used index value we have signalled on */
uint16_t signalled_used;
/* Last used index value we have signalled on */
bool signalled_used_valid;
/* Notification enabled? */
bool notification;
unsigned int inuse;
vu_queue_handler_cb handler;
int call_fd;
int kick_fd;
int err_fd;
unsigned int enable;
bool started;
/* Guest addresses of our ring */
struct vhost_vring_addr vra;
} VuVirtq;
enum VuWatchCondtion {
VU_WATCH_IN = POLLIN,
VU_WATCH_OUT = POLLOUT,
VU_WATCH_PRI = POLLPRI,
VU_WATCH_ERR = POLLERR,
VU_WATCH_HUP = POLLHUP,
};
typedef void (*vu_panic_cb) (VuDev *dev, const char *err);
typedef void (*vu_watch_cb) (VuDev *dev, int condition, void *data);
typedef void (*vu_set_watch_cb) (VuDev *dev, int fd, int condition,
vu_watch_cb cb, void *data);
typedef void (*vu_remove_watch_cb) (VuDev *dev, int fd);
typedef struct VuDevInflightInfo {
int fd;
void *addr;
uint64_t size;
} VuDevInflightInfo;
struct VuDev {
int sock;
uint32_t nregions;
VuDevRegion regions[VHOST_USER_MAX_RAM_SLOTS];
VuVirtq *vq;
VuDevInflightInfo inflight_info;
int log_call_fd;
/* Must be held while using backend_fd */
pthread_mutex_t backend_mutex;
int backend_fd;
uint64_t log_size;
uint8_t *log_table;
uint64_t features;
uint64_t protocol_features;
bool broken;
uint16_t max_queues;
/*
* @read_msg: custom method to read vhost-user message
*
* Read data from vhost_user socket fd and fill up
* the passed VhostUserMsg *vmsg struct.
*
* If reading fails, it should close the received set of file
* descriptors as socket message's auxiliary data.
*
* For the details, please refer to vu_message_read in libvhost-user.c
* which will be used by default if not custom method is provided when
* calling vu_init
*
* Returns: true if vhost-user message successfully received,
* otherwise return false.
*
*/
vu_read_msg_cb read_msg;
/*
* @set_watch: add or update the given fd to the watch set,
* call cb when condition is met.
*/
vu_set_watch_cb set_watch;
/* @remove_watch: remove the given fd from the watch set */
vu_remove_watch_cb remove_watch;
/*
* @panic: encountered an unrecoverable error, you may try to re-initialize
*/
vu_panic_cb panic;
const VuDevIface *iface;
/* Postcopy data */
int postcopy_ufd;
bool postcopy_listening;
};
typedef struct VuVirtqElement {
unsigned int index;
unsigned int out_num;
unsigned int in_num;
struct iovec *in_sg;
struct iovec *out_sg;
} VuVirtqElement;
/**
* vu_init:
* @dev: a VuDev context
* @max_queues: maximum number of virtqueues
* @socket: the socket connected to vhost-user frontend
* @panic: a panic callback
* @set_watch: a set_watch callback
* @remove_watch: a remove_watch callback
* @iface: a VuDevIface structure with vhost-user device callbacks
*
* Initializes a VuDev vhost-user context.
*
* Returns: true on success, false on failure.
**/
bool vu_init(VuDev *dev,
uint16_t max_queues,
int socket,
vu_panic_cb panic,
vu_read_msg_cb read_msg,
vu_set_watch_cb set_watch,
vu_remove_watch_cb remove_watch,
const VuDevIface *iface);
/**
* vu_deinit:
* @dev: a VuDev context
*
* Cleans up the VuDev context
*/
void vu_deinit(VuDev *dev);
/**
* vu_request_to_string: return string for vhost message request
* @req: VhostUserMsg request
*
* Returns a const string, do not free.
*/
const char *vu_request_to_string(unsigned int req);
/**
* vu_dispatch:
* @dev: a VuDev context
*
* Process one vhost-user message.
*
* Returns: TRUE on success, FALSE on failure.
*/
bool vu_dispatch(VuDev *dev);
/**
* vu_gpa_to_va:
* @dev: a VuDev context
* @plen: guest memory size
* @guest_addr: guest address
*
* Translate a guest address to a pointer. Returns NULL on failure.
*/
void *vu_gpa_to_va(VuDev *dev, uint64_t *plen, uint64_t guest_addr);
/**
* vu_get_queue:
* @dev: a VuDev context
* @qidx: queue index
*
* Returns the queue number @qidx.
*/
VuVirtq *vu_get_queue(VuDev *dev, int qidx);
/**
* vu_set_queue_handler:
* @dev: a VuDev context
* @vq: a VuVirtq queue
* @handler: the queue handler callback
*
* Set the queue handler. This function may be called several times
* for the same queue. If called with NULL @handler, the handler is
* removed.
*/
void vu_set_queue_handler(VuDev *dev, VuVirtq *vq,
vu_queue_handler_cb handler);
/**
* vu_set_queue_host_notifier:
* @dev: a VuDev context
* @vq: a VuVirtq queue
* @fd: a file descriptor
* @size: host page size
* @offset: notifier offset in @fd file
*
* Set queue's host notifier. This function may be called several
* times for the same queue. If called with -1 @fd, the notifier
* is removed.
*/
bool vu_set_queue_host_notifier(VuDev *dev, VuVirtq *vq, int fd,
int size, int offset);
/**
* vu_queue_set_notification:
* @dev: a VuDev context
* @vq: a VuVirtq queue
* @enable: state
*
* Set whether the queue notifies (via event index or interrupt)
*/
void vu_queue_set_notification(VuDev *dev, VuVirtq *vq, int enable);
/**
* vu_queue_enabled:
* @dev: a VuDev context
* @vq: a VuVirtq queue
*
* Returns: whether the queue is enabled.
*/
bool vu_queue_enabled(VuDev *dev, VuVirtq *vq);
/**
* vu_queue_started:
* @dev: a VuDev context
* @vq: a VuVirtq queue
*
* Returns: whether the queue is started.
*/
bool vu_queue_started(const VuDev *dev, const VuVirtq *vq);
/**
* vu_queue_empty:
* @dev: a VuDev context
* @vq: a VuVirtq queue
*
* Returns: true if the queue is empty or not ready.
*/
bool vu_queue_empty(VuDev *dev, VuVirtq *vq);
/**
* vu_queue_notify:
* @dev: a VuDev context
* @vq: a VuVirtq queue
*
* Request to notify the queue via callfd (skipped if unnecessary)
*/
void vu_queue_notify(VuDev *dev, VuVirtq *vq);
void vu_config_change_msg(VuDev *dev);
/**
* vu_queue_notify_sync:
* @dev: a VuDev context
* @vq: a VuVirtq queue
*
* Request to notify the queue via callfd (skipped if unnecessary)
* or sync message if possible.
*/
void vu_queue_notify_sync(VuDev *dev, VuVirtq *vq);
/**
* vu_queue_pop:
* @dev: a VuDev context
* @vq: a VuVirtq queue
* @sz: the size of struct to return (must be >= VuVirtqElement)
*
* Returns: a VuVirtqElement filled from the queue or NULL. The
* returned element must be free()-d by the caller.
*/
void *vu_queue_pop(VuDev *dev, VuVirtq *vq, size_t sz);
/**
* vu_queue_unpop:
* @dev: a VuDev context
* @vq: a VuVirtq queue
* @elem: The #VuVirtqElement
* @len: number of bytes written
*
* Pretend the most recent element wasn't popped from the virtqueue. The next
* call to vu_queue_pop() will refetch the element.
*/
void vu_queue_unpop(VuDev *dev, VuVirtq *vq, VuVirtqElement *elem,
size_t len);
/**
* vu_queue_rewind:
* @dev: a VuDev context
* @vq: a VuVirtq queue
* @num: number of elements to push back
*
* Pretend that elements weren't popped from the virtqueue. The next
* virtqueue_pop() will refetch the oldest element.
*
* Returns: true on success, false if @num is greater than the number of in use
* elements.
*/
bool vu_queue_rewind(VuDev *dev, VuVirtq *vq, unsigned int num);
/**
* vu_queue_fill:
* @dev: a VuDev context
* @vq: a VuVirtq queue
* @elem: a VuVirtqElement
* @len: length in bytes to write
* @idx: optional offset for the used ring index (0 in general)
*
* Fill the used ring with @elem element.
*/
void vu_queue_fill(VuDev *dev, VuVirtq *vq,
const VuVirtqElement *elem,
unsigned int len, unsigned int idx);
/**
* vu_queue_push:
* @dev: a VuDev context
* @vq: a VuVirtq queue
* @elem: a VuVirtqElement
* @len: length in bytes to write
*
* Helper that combines vu_queue_fill() with a vu_queue_flush().
*/
void vu_queue_push(VuDev *dev, VuVirtq *vq,
const VuVirtqElement *elem, unsigned int len);
/**
* vu_queue_flush:
* @dev: a VuDev context
* @vq: a VuVirtq queue
* @num: number of elements to flush
*
* Mark the last number of elements as done (used.idx is updated by
* num elements).
*/
void vu_queue_flush(VuDev *dev, VuVirtq *vq, unsigned int num);
/**
* vu_queue_get_avail_bytes:
* @dev: a VuDev context
* @vq: a VuVirtq queue
* @in_bytes: in bytes
* @out_bytes: out bytes
* @max_in_bytes: stop counting after max_in_bytes
* @max_out_bytes: stop counting after max_out_bytes
*
* Count the number of available bytes, up to max_in_bytes/max_out_bytes.
*/
void vu_queue_get_avail_bytes(VuDev *vdev, VuVirtq *vq, unsigned int *in_bytes,
unsigned int *out_bytes,
unsigned max_in_bytes, unsigned max_out_bytes);
/**
* vu_queue_avail_bytes:
* @dev: a VuDev context
* @vq: a VuVirtq queue
* @in_bytes: expected in bytes
* @out_bytes: expected out bytes
*
* Returns: true if in_bytes <= in_total && out_bytes <= out_total
*/
bool vu_queue_avail_bytes(VuDev *dev, VuVirtq *vq, unsigned int in_bytes,
unsigned int out_bytes);
#endif /* LIBVHOST_USER_H */