qemu/include/hw/sd/sd.h

/*
 * SD Memory Card emulation.  Mostly correct for MMC too.
 *
 * Copyright (c) 2006 Andrzej Zaborowski  <balrog@zabor.org>
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 *
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in
 *    the documentation and/or other materials provided with the
 *    distribution.
 *
 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS''
 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
 * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
 * PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR
 * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
 * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
 * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
 * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY
 * OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 */

#ifndef HW_SD_H
#define HW_SD_H

#include "hw/qdev-core.h"
#include "qom/object.h"

#define OUT_OF_RANGE            (1 << 31)
#define ADDRESS_ERROR           (1 << 30)
#define BLOCK_LEN_ERROR         (1 << 29)
#define ERASE_SEQ_ERROR         (1 << 28)
#define ERASE_PARAM             (1 << 27)
#define WP_VIOLATION            (1 << 26)
#define CARD_IS_LOCKED          (1 << 25)
#define LOCK_UNLOCK_FAILED      (1 << 24)
#define COM_CRC_ERROR           (1 << 23)
#define ILLEGAL_COMMAND         (1 << 22)
#define CARD_ECC_FAILED         (1 << 21)
#define CC_ERROR                (1 << 20)
#define SD_ERROR                (1 << 19)
#define CID_CSD_OVERWRITE       (1 << 16)
#define WP_ERASE_SKIP           (1 << 15)
#define CARD_ECC_DISABLED       (1 << 14)
#define ERASE_RESET             (1 << 13)
#define CURRENT_STATE           (7 << 9)
#define READY_FOR_DATA          (1 << 8)
#define APP_CMD                 (1 << 5)
#define AKE_SEQ_ERROR           (1 << 3)

enum SDPhySpecificationVersion {
    SD_PHY_SPECv1_10_VERS     = 1,
    SD_PHY_SPECv2_00_VERS     = 2,
    SD_PHY_SPECv3_01_VERS     = 3,
};

typedef enum {
    SD_VOLTAGE_0_4V     = 400,  /* currently not supported */
    SD_VOLTAGE_1_8V     = 1800,
    SD_VOLTAGE_3_0V     = 3000,
    SD_VOLTAGE_3_3V     = 3300,
} sd_voltage_mv_t;

typedef enum  {
    UHS_NOT_SUPPORTED   = 0,
    UHS_I               = 1,
    UHS_II              = 2,    /* currently not supported */
    UHS_III             = 3,    /* currently not supported */
} sd_uhs_mode_t;

typedef struct {
    uint8_t cmd;
    uint32_t arg;
    uint8_t crc;
} SDRequest;


#define TYPE_SD_CARD "sd-card"
OBJECT_DECLARE_TYPE(SDState, SDCardClass, SD_CARD)

#define TYPE_SD_CARD_SPI "sd-card-spi"
DECLARE_INSTANCE_CHECKER(SDState, SD_CARD_SPI, TYPE_SD_CARD_SPI)

#define TYPE_EMMC "emmc"
DECLARE_INSTANCE_CHECKER(SDState, EMMC, TYPE_EMMC)

struct SDCardClass {
    /*< private >*/
    DeviceClass parent_class;
    /*< public >*/

    int (*do_command)(SDState *sd, SDRequest *req, uint8_t *response);
    /**
     * Write a byte to a SD card.
     * @sd: card
     * @value: byte to write
     *
     * Write a byte on the data lines of a SD card.
     */
    void (*write_byte)(SDState *sd, uint8_t value);
    /**
     * Read a byte from a SD card.
     * @sd: card
     *
     * Read a byte from the data lines of a SD card.
     *
     * Return: byte value read
     */
    uint8_t (*read_byte)(SDState *sd);
    bool (*receive_ready)(SDState *sd);
    bool (*data_ready)(SDState *sd);
    void (*set_voltage)(SDState *sd, uint16_t millivolts);
    uint8_t (*get_dat_lines)(SDState *sd);
    bool (*get_cmd_line)(SDState *sd);
    void (*enable)(SDState *sd, bool enable);
    bool (*get_inserted)(SDState *sd);
    bool (*get_readonly)(SDState *sd);
    void (*set_cid)(SDState *sd);
    void (*set_csd)(SDState *sd, uint64_t size);

    const struct SDProto *proto;
};

#define TYPE_SD_BUS "sd-bus"
OBJECT_DECLARE_TYPE(SDBus, SDBusClass,
                    SD_BUS)

struct SDBus {
    BusState qbus;
};

struct SDBusClass {
    /*< private >*/
    BusClass parent_class;
    /*< public >*/

    /* These methods are called by the SD device to notify the controller
     * when the card insertion or readonly status changes
     */
    void (*set_inserted)(DeviceState *dev, bool inserted);
    void (*set_readonly)(DeviceState *dev, bool readonly);
};

/* Functions to be used by qdevified callers (working via
 * an SDBus rather than directly with SDState)
 */
void sdbus_set_voltage(SDBus *sdbus, uint16_t millivolts);
uint8_t sdbus_get_dat_lines(SDBus *sdbus);
bool sdbus_get_cmd_line(SDBus *sdbus);
int sdbus_do_command(SDBus *sd, SDRequest *req, uint8_t *response);
/**
 * Write a byte to a SD bus.
 * @sd: bus
 * @value: byte to write
 *
 * Write a byte on the data lines of a SD bus.
 */
void sdbus_write_byte(SDBus *sd, uint8_t value);
/**
 * Read a byte from a SD bus.
 * @sd: bus
 *
 * Read a byte from the data lines of a SD bus.
 *
 * Return: byte value read
 */
uint8_t sdbus_read_byte(SDBus *sd);
/**
 * Write data to a SD bus.
 * @sdbus: bus
 * @buf: data to write
 * @length: number of bytes to write
 *
 * Write multiple bytes of data on the data lines of a SD bus.
 */
void sdbus_write_data(SDBus *sdbus, const void *buf, size_t length);
/**
 * Read data from a SD bus.
 * @sdbus: bus
 * @buf: buffer to read data into
 * @length: number of bytes to read
 *
 * Read multiple bytes of data on the data lines of a SD bus.
 */
void sdbus_read_data(SDBus *sdbus, void *buf, size_t length);
bool sdbus_receive_ready(SDBus *sd);
bool sdbus_data_ready(SDBus *sd);
bool sdbus_get_inserted(SDBus *sd);
bool sdbus_get_readonly(SDBus *sd);
/**
 * sdbus_reparent_card: Reparent an SD card from one controller to another
 * @from: controller bus to remove card from
 * @to: controller bus to move card to
 *
 * Reparent an SD card, effectively unplugging it from one controller
 * and inserting it into another. This is useful for SoCs like the
 * bcm2835 which have two SD controllers and connect a single SD card
 * to them, selected by the guest reprogramming GPIO line routing.
 */
void sdbus_reparent_card(SDBus *from, SDBus *to);

/* Functions to be used by SD devices to report back to qdevified controllers */
void sdbus_set_inserted(SDBus *sd, bool inserted);
void sdbus_set_readonly(SDBus *sd, bool inserted);

#endif /* HW_SD_H */