409dbce54b
A few machines need to translate the ELF header addresses into physical addresses. Currently the only possibility is to add a value to the addresses. This patch replaces the addend argument by and a translation function and an opaque passed to the function. A NULL function does not translate the address. The patch also convert all machines that have an addend, simplify the PowerPC kernel loading and fix the MIPS kernel loading using this new feature. Other machines may benefit from this feature. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
305 lines
7.8 KiB
C
305 lines
7.8 KiB
C
/*
|
|
* Motorola ColdFire MCF5208 SoC emulation.
|
|
*
|
|
* Copyright (c) 2007 CodeSourcery.
|
|
*
|
|
* This code is licenced under the GPL
|
|
*/
|
|
#include "hw.h"
|
|
#include "mcf.h"
|
|
#include "qemu-timer.h"
|
|
#include "sysemu.h"
|
|
#include "net.h"
|
|
#include "boards.h"
|
|
#include "loader.h"
|
|
#include "elf.h"
|
|
|
|
#define SYS_FREQ 66000000
|
|
|
|
#define PCSR_EN 0x0001
|
|
#define PCSR_RLD 0x0002
|
|
#define PCSR_PIF 0x0004
|
|
#define PCSR_PIE 0x0008
|
|
#define PCSR_OVW 0x0010
|
|
#define PCSR_DBG 0x0020
|
|
#define PCSR_DOZE 0x0040
|
|
#define PCSR_PRE_SHIFT 8
|
|
#define PCSR_PRE_MASK 0x0f00
|
|
|
|
typedef struct {
|
|
qemu_irq irq;
|
|
ptimer_state *timer;
|
|
uint16_t pcsr;
|
|
uint16_t pmr;
|
|
uint16_t pcntr;
|
|
} m5208_timer_state;
|
|
|
|
static void m5208_timer_update(m5208_timer_state *s)
|
|
{
|
|
if ((s->pcsr & (PCSR_PIE | PCSR_PIF)) == (PCSR_PIE | PCSR_PIF))
|
|
qemu_irq_raise(s->irq);
|
|
else
|
|
qemu_irq_lower(s->irq);
|
|
}
|
|
|
|
static void m5208_timer_write(void *opaque, target_phys_addr_t offset,
|
|
uint32_t value)
|
|
{
|
|
m5208_timer_state *s = (m5208_timer_state *)opaque;
|
|
int prescale;
|
|
int limit;
|
|
switch (offset) {
|
|
case 0:
|
|
/* The PIF bit is set-to-clear. */
|
|
if (value & PCSR_PIF) {
|
|
s->pcsr &= ~PCSR_PIF;
|
|
value &= ~PCSR_PIF;
|
|
}
|
|
/* Avoid frobbing the timer if we're just twiddling IRQ bits. */
|
|
if (((s->pcsr ^ value) & ~PCSR_PIE) == 0) {
|
|
s->pcsr = value;
|
|
m5208_timer_update(s);
|
|
return;
|
|
}
|
|
|
|
if (s->pcsr & PCSR_EN)
|
|
ptimer_stop(s->timer);
|
|
|
|
s->pcsr = value;
|
|
|
|
prescale = 1 << ((s->pcsr & PCSR_PRE_MASK) >> PCSR_PRE_SHIFT);
|
|
ptimer_set_freq(s->timer, (SYS_FREQ / 2) / prescale);
|
|
if (s->pcsr & PCSR_RLD)
|
|
limit = s->pmr;
|
|
else
|
|
limit = 0xffff;
|
|
ptimer_set_limit(s->timer, limit, 0);
|
|
|
|
if (s->pcsr & PCSR_EN)
|
|
ptimer_run(s->timer, 0);
|
|
break;
|
|
case 2:
|
|
s->pmr = value;
|
|
s->pcsr &= ~PCSR_PIF;
|
|
if ((s->pcsr & PCSR_RLD) == 0) {
|
|
if (s->pcsr & PCSR_OVW)
|
|
ptimer_set_count(s->timer, value);
|
|
} else {
|
|
ptimer_set_limit(s->timer, value, s->pcsr & PCSR_OVW);
|
|
}
|
|
break;
|
|
case 4:
|
|
break;
|
|
default:
|
|
hw_error("m5208_timer_write: Bad offset 0x%x\n", (int)offset);
|
|
break;
|
|
}
|
|
m5208_timer_update(s);
|
|
}
|
|
|
|
static void m5208_timer_trigger(void *opaque)
|
|
{
|
|
m5208_timer_state *s = (m5208_timer_state *)opaque;
|
|
s->pcsr |= PCSR_PIF;
|
|
m5208_timer_update(s);
|
|
}
|
|
|
|
static uint32_t m5208_timer_read(void *opaque, target_phys_addr_t addr)
|
|
{
|
|
m5208_timer_state *s = (m5208_timer_state *)opaque;
|
|
switch (addr) {
|
|
case 0:
|
|
return s->pcsr;
|
|
case 2:
|
|
return s->pmr;
|
|
case 4:
|
|
return ptimer_get_count(s->timer);
|
|
default:
|
|
hw_error("m5208_timer_read: Bad offset 0x%x\n", (int)addr);
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
static CPUReadMemoryFunc * const m5208_timer_readfn[] = {
|
|
m5208_timer_read,
|
|
m5208_timer_read,
|
|
m5208_timer_read
|
|
};
|
|
|
|
static CPUWriteMemoryFunc * const m5208_timer_writefn[] = {
|
|
m5208_timer_write,
|
|
m5208_timer_write,
|
|
m5208_timer_write
|
|
};
|
|
|
|
static uint32_t m5208_sys_read(void *opaque, target_phys_addr_t addr)
|
|
{
|
|
switch (addr) {
|
|
case 0x110: /* SDCS0 */
|
|
{
|
|
int n;
|
|
for (n = 0; n < 32; n++) {
|
|
if (ram_size < (2u << n))
|
|
break;
|
|
}
|
|
return (n - 1) | 0x40000000;
|
|
}
|
|
case 0x114: /* SDCS1 */
|
|
return 0;
|
|
|
|
default:
|
|
hw_error("m5208_sys_read: Bad offset 0x%x\n", (int)addr);
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
static void m5208_sys_write(void *opaque, target_phys_addr_t addr,
|
|
uint32_t value)
|
|
{
|
|
hw_error("m5208_sys_write: Bad offset 0x%x\n", (int)addr);
|
|
}
|
|
|
|
static CPUReadMemoryFunc * const m5208_sys_readfn[] = {
|
|
m5208_sys_read,
|
|
m5208_sys_read,
|
|
m5208_sys_read
|
|
};
|
|
|
|
static CPUWriteMemoryFunc * const m5208_sys_writefn[] = {
|
|
m5208_sys_write,
|
|
m5208_sys_write,
|
|
m5208_sys_write
|
|
};
|
|
|
|
static void mcf5208_sys_init(qemu_irq *pic)
|
|
{
|
|
int iomemtype;
|
|
m5208_timer_state *s;
|
|
QEMUBH *bh;
|
|
int i;
|
|
|
|
iomemtype = cpu_register_io_memory(m5208_sys_readfn,
|
|
m5208_sys_writefn, NULL);
|
|
/* SDRAMC. */
|
|
cpu_register_physical_memory(0xfc0a8000, 0x00004000, iomemtype);
|
|
/* Timers. */
|
|
for (i = 0; i < 2; i++) {
|
|
s = (m5208_timer_state *)qemu_mallocz(sizeof(m5208_timer_state));
|
|
bh = qemu_bh_new(m5208_timer_trigger, s);
|
|
s->timer = ptimer_init(bh);
|
|
iomemtype = cpu_register_io_memory(m5208_timer_readfn,
|
|
m5208_timer_writefn, s);
|
|
cpu_register_physical_memory(0xfc080000 + 0x4000 * i, 0x00004000,
|
|
iomemtype);
|
|
s->irq = pic[4 + i];
|
|
}
|
|
}
|
|
|
|
static void mcf5208evb_init(ram_addr_t ram_size,
|
|
const char *boot_device,
|
|
const char *kernel_filename, const char *kernel_cmdline,
|
|
const char *initrd_filename, const char *cpu_model)
|
|
{
|
|
CPUState *env;
|
|
int kernel_size;
|
|
uint64_t elf_entry;
|
|
target_phys_addr_t entry;
|
|
qemu_irq *pic;
|
|
|
|
if (!cpu_model)
|
|
cpu_model = "m5208";
|
|
env = cpu_init(cpu_model);
|
|
if (!env) {
|
|
fprintf(stderr, "Unable to find m68k CPU definition\n");
|
|
exit(1);
|
|
}
|
|
|
|
/* Initialize CPU registers. */
|
|
env->vbr = 0;
|
|
/* TODO: Configure BARs. */
|
|
|
|
/* DRAM at 0x40000000 */
|
|
cpu_register_physical_memory(0x40000000, ram_size,
|
|
qemu_ram_alloc(ram_size) | IO_MEM_RAM);
|
|
|
|
/* Internal SRAM. */
|
|
cpu_register_physical_memory(0x80000000, 16384,
|
|
qemu_ram_alloc(16384) | IO_MEM_RAM);
|
|
|
|
/* Internal peripherals. */
|
|
pic = mcf_intc_init(0xfc048000, env);
|
|
|
|
mcf_uart_mm_init(0xfc060000, pic[26], serial_hds[0]);
|
|
mcf_uart_mm_init(0xfc064000, pic[27], serial_hds[1]);
|
|
mcf_uart_mm_init(0xfc068000, pic[28], serial_hds[2]);
|
|
|
|
mcf5208_sys_init(pic);
|
|
|
|
if (nb_nics > 1) {
|
|
fprintf(stderr, "Too many NICs\n");
|
|
exit(1);
|
|
}
|
|
if (nd_table[0].vlan)
|
|
mcf_fec_init(&nd_table[0], 0xfc030000, pic + 36);
|
|
|
|
/* 0xfc000000 SCM. */
|
|
/* 0xfc004000 XBS. */
|
|
/* 0xfc008000 FlexBus CS. */
|
|
/* 0xfc030000 FEC. */
|
|
/* 0xfc040000 SCM + Power management. */
|
|
/* 0xfc044000 eDMA. */
|
|
/* 0xfc048000 INTC. */
|
|
/* 0xfc058000 I2C. */
|
|
/* 0xfc05c000 QSPI. */
|
|
/* 0xfc060000 UART0. */
|
|
/* 0xfc064000 UART0. */
|
|
/* 0xfc068000 UART0. */
|
|
/* 0xfc070000 DMA timers. */
|
|
/* 0xfc080000 PIT0. */
|
|
/* 0xfc084000 PIT1. */
|
|
/* 0xfc088000 EPORT. */
|
|
/* 0xfc08c000 Watchdog. */
|
|
/* 0xfc090000 clock module. */
|
|
/* 0xfc0a0000 CCM + reset. */
|
|
/* 0xfc0a4000 GPIO. */
|
|
/* 0xfc0a8000 SDRAM controller. */
|
|
|
|
/* Load kernel. */
|
|
if (!kernel_filename) {
|
|
fprintf(stderr, "Kernel image must be specified\n");
|
|
exit(1);
|
|
}
|
|
|
|
kernel_size = load_elf(kernel_filename, NULL, NULL, &elf_entry,
|
|
NULL, NULL, 1, ELF_MACHINE, 0);
|
|
entry = elf_entry;
|
|
if (kernel_size < 0) {
|
|
kernel_size = load_uimage(kernel_filename, &entry, NULL, NULL);
|
|
}
|
|
if (kernel_size < 0) {
|
|
kernel_size = load_image_targphys(kernel_filename, 0x40000000,
|
|
ram_size);
|
|
entry = 0x40000000;
|
|
}
|
|
if (kernel_size < 0) {
|
|
fprintf(stderr, "qemu: could not load kernel '%s'\n", kernel_filename);
|
|
exit(1);
|
|
}
|
|
|
|
env->pc = entry;
|
|
}
|
|
|
|
static QEMUMachine mcf5208evb_machine = {
|
|
.name = "mcf5208evb",
|
|
.desc = "MCF5206EVB",
|
|
.init = mcf5208evb_init,
|
|
.is_default = 1,
|
|
};
|
|
|
|
static void mcf5208evb_machine_init(void)
|
|
{
|
|
qemu_register_machine(&mcf5208evb_machine);
|
|
}
|
|
|
|
machine_init(mcf5208evb_machine_init);
|