mirrors/qemu
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
b867672884
qemu/hw/virtio-pci.c
Anthony Liguori 6acbe4c6f1 qdev: remove baked in notion of aliases (v2) 
Limit them to the device_add functionality.  Device aliases were a hack based
on the fact that virtio was modeled the wrong way.  The mechanism for aliasing
is very limited in that only one alias can exist for any device.

We have to support it for the purposes of compatibility but we only need to
support it in device_add so restrict it to that piece of code.

Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
---
v1 -> v2
 - Use a table for aliases (Paolo)
2012-02-03 10:41:07 -06:00

942 lines
29 KiB
C
Raw Blame History

/*
* Virtio PCI Bindings
*
* Copyright IBM, Corp. 2007
* Copyright (c) 2009 CodeSourcery
*
* Authors:
* Anthony Liguori <aliguori@us.ibm.com>
* Paul Brook <paul@codesourcery.com>
*
* This work is licensed under the terms of the GNU GPL, version 2. See
* the COPYING file in the top-level directory.
*
* Contributions after 2012-01-13 are licensed under the terms of the
* GNU GPL, version 2 or (at your option) any later version.
*/
#include <inttypes.h>
#include "virtio.h"
#include "virtio-blk.h"
#include "virtio-net.h"
#include "virtio-serial.h"
#include "pci.h"
#include "qemu-error.h"
#include "msix.h"
#include "net.h"
#include "loader.h"
#include "kvm.h"
#include "blockdev.h"
#include "virtio-pci.h"
#include "range.h"
/* from Linux's linux/virtio_pci.h */
/* A 32-bit r/o bitmask of the features supported by the host */
#define VIRTIO_PCI_HOST_FEATURES 0
/* A 32-bit r/w bitmask of features activated by the guest */
#define VIRTIO_PCI_GUEST_FEATURES 4
/* A 32-bit r/w PFN for the currently selected queue */
#define VIRTIO_PCI_QUEUE_PFN 8
/* A 16-bit r/o queue size for the currently selected queue */
#define VIRTIO_PCI_QUEUE_NUM 12
/* A 16-bit r/w queue selector */
#define VIRTIO_PCI_QUEUE_SEL 14
/* A 16-bit r/w queue notifier */
#define VIRTIO_PCI_QUEUE_NOTIFY 16
/* An 8-bit device status register. */
#define VIRTIO_PCI_STATUS 18
/* An 8-bit r/o interrupt status register. Reading the value will return the
* current contents of the ISR and will also clear it. This is effectively
* a read-and-acknowledge. */
#define VIRTIO_PCI_ISR 19
/* MSI-X registers: only enabled if MSI-X is enabled. */
/* A 16-bit vector for configuration changes. */
#define VIRTIO_MSI_CONFIG_VECTOR 20
/* A 16-bit vector for selected queue notifications. */
#define VIRTIO_MSI_QUEUE_VECTOR 22
/* Config space size */
#define VIRTIO_PCI_CONFIG_NOMSI 20
#define VIRTIO_PCI_CONFIG_MSI 24
#define VIRTIO_PCI_REGION_SIZE(dev) (msix_present(dev) ? \
VIRTIO_PCI_CONFIG_MSI : \
VIRTIO_PCI_CONFIG_NOMSI)
/* The remaining space is defined by each driver as the per-driver
* configuration space */
#define VIRTIO_PCI_CONFIG(dev) (msix_enabled(dev) ? \
VIRTIO_PCI_CONFIG_MSI : \
VIRTIO_PCI_CONFIG_NOMSI)
/* How many bits to shift physical queue address written to QUEUE_PFN.
* 12 is historical, and due to x86 page size. */
#define VIRTIO_PCI_QUEUE_ADDR_SHIFT 12
/* Flags track per-device state like workarounds for quirks in older guests. */
#define VIRTIO_PCI_FLAG_BUS_MASTER_BUG (1 << 0)
/* QEMU doesn't strictly need write barriers since everything runs in
* lock-step. We'll leave the calls to wmb() in though to make it obvious for
* KVM or if kqemu gets SMP support.
*/
#define wmb() do { } while (0)
/* HACK for virtio to determine if it's running a big endian guest */
bool virtio_is_big_endian(void);
/* virtio device */
static void virtio_pci_notify(void *opaque, uint16_t vector)
{
VirtIOPCIProxy *proxy = opaque;
if (msix_enabled(&proxy->pci_dev))
msix_notify(&proxy->pci_dev, vector);
else
qemu_set_irq(proxy->pci_dev.irq[0], proxy->vdev->isr & 1);
}
static void virtio_pci_save_config(void * opaque, QEMUFile *f)
{
VirtIOPCIProxy *proxy = opaque;
pci_device_save(&proxy->pci_dev, f);
msix_save(&proxy->pci_dev, f);
if (msix_present(&proxy->pci_dev))
qemu_put_be16(f, proxy->vdev->config_vector);
}
static void virtio_pci_save_queue(void * opaque, int n, QEMUFile *f)
{
VirtIOPCIProxy *proxy = opaque;
if (msix_present(&proxy->pci_dev))
qemu_put_be16(f, virtio_queue_vector(proxy->vdev, n));
}
static int virtio_pci_load_config(void * opaque, QEMUFile *f)
{
VirtIOPCIProxy *proxy = opaque;
int ret;
ret = pci_device_load(&proxy->pci_dev, f);
if (ret) {
return ret;
}
msix_load(&proxy->pci_dev, f);
if (msix_present(&proxy->pci_dev)) {
qemu_get_be16s(f, &proxy->vdev->config_vector);
} else {
proxy->vdev->config_vector = VIRTIO_NO_VECTOR;
}
if (proxy->vdev->config_vector != VIRTIO_NO_VECTOR) {
return msix_vector_use(&proxy->pci_dev, proxy->vdev->config_vector);
}
return 0;
}
static int virtio_pci_load_queue(void * opaque, int n, QEMUFile *f)
{
VirtIOPCIProxy *proxy = opaque;
uint16_t vector;
if (msix_present(&proxy->pci_dev)) {
qemu_get_be16s(f, &vector);
} else {
vector = VIRTIO_NO_VECTOR;
}
virtio_queue_set_vector(proxy->vdev, n, vector);
if (vector != VIRTIO_NO_VECTOR) {
return msix_vector_use(&proxy->pci_dev, vector);
}
return 0;
}
static int virtio_pci_set_host_notifier_internal(VirtIOPCIProxy *proxy,
int n, bool assign)
{
VirtQueue *vq = virtio_get_queue(proxy->vdev, n);
EventNotifier *notifier = virtio_queue_get_host_notifier(vq);
int r = 0;
if (assign) {
r = event_notifier_init(notifier, 1);
if (r < 0) {
error_report("%s: unable to init event notifier: %d",
__func__, r);
return r;
}
memory_region_add_eventfd(&proxy->bar, VIRTIO_PCI_QUEUE_NOTIFY, 2,
true, n, event_notifier_get_fd(notifier));
} else {
memory_region_del_eventfd(&proxy->bar, VIRTIO_PCI_QUEUE_NOTIFY, 2,
true, n, event_notifier_get_fd(notifier));
/* Handle the race condition where the guest kicked and we deassigned
* before we got around to handling the kick.
*/
if (event_notifier_test_and_clear(notifier)) {
virtio_queue_notify_vq(vq);
}
event_notifier_cleanup(notifier);
}
return r;
}
static void virtio_pci_host_notifier_read(void *opaque)
{
VirtQueue *vq = opaque;
EventNotifier *n = virtio_queue_get_host_notifier(vq);
if (event_notifier_test_and_clear(n)) {
virtio_queue_notify_vq(vq);
}
}
static void virtio_pci_set_host_notifier_fd_handler(VirtIOPCIProxy *proxy,
int n, bool assign)
{
VirtQueue *vq = virtio_get_queue(proxy->vdev, n);
EventNotifier *notifier = virtio_queue_get_host_notifier(vq);
if (assign) {
qemu_set_fd_handler(event_notifier_get_fd(notifier),
virtio_pci_host_notifier_read, NULL, vq);
} else {
qemu_set_fd_handler(event_notifier_get_fd(notifier),
NULL, NULL, NULL);
}
}
static void virtio_pci_start_ioeventfd(VirtIOPCIProxy *proxy)
{
int n, r;
if (!(proxy->flags & VIRTIO_PCI_FLAG_USE_IOEVENTFD) ||
proxy->ioeventfd_disabled ||
proxy->ioeventfd_started) {
return;
}
for (n = 0; n < VIRTIO_PCI_QUEUE_MAX; n++) {
if (!virtio_queue_get_num(proxy->vdev, n)) {
continue;
}
r = virtio_pci_set_host_notifier_internal(proxy, n, true);
if (r < 0) {
goto assign_error;
}
virtio_pci_set_host_notifier_fd_handler(proxy, n, true);
}
proxy->ioeventfd_started = true;
return;
assign_error:
while (--n >= 0) {
if (!virtio_queue_get_num(proxy->vdev, n)) {
continue;
}
virtio_pci_set_host_notifier_fd_handler(proxy, n, false);
r = virtio_pci_set_host_notifier_internal(proxy, n, false);
assert(r >= 0);
}
proxy->ioeventfd_started = false;
error_report("%s: failed. Fallback to a userspace (slower).", __func__);
}
static void virtio_pci_stop_ioeventfd(VirtIOPCIProxy *proxy)
{
int r;
int n;
if (!proxy->ioeventfd_started) {
return;
}
for (n = 0; n < VIRTIO_PCI_QUEUE_MAX; n++) {
if (!virtio_queue_get_num(proxy->vdev, n)) {
continue;
}
virtio_pci_set_host_notifier_fd_handler(proxy, n, false);
r = virtio_pci_set_host_notifier_internal(proxy, n, false);
assert(r >= 0);
}
proxy->ioeventfd_started = false;
}
void virtio_pci_reset(DeviceState *d)
{
VirtIOPCIProxy *proxy = container_of(d, VirtIOPCIProxy, pci_dev.qdev);
virtio_pci_stop_ioeventfd(proxy);
virtio_reset(proxy->vdev);
msix_reset(&proxy->pci_dev);
proxy->flags &= ~VIRTIO_PCI_FLAG_BUS_MASTER_BUG;
}
static void virtio_ioport_write(void *opaque, uint32_t addr, uint32_t val)
{
VirtIOPCIProxy *proxy = opaque;
VirtIODevice *vdev = proxy->vdev;
target_phys_addr_t pa;
switch (addr) {
case VIRTIO_PCI_GUEST_FEATURES:
/* Guest does not negotiate properly? We have to assume nothing. */
if (val & (1 << VIRTIO_F_BAD_FEATURE)) {
val = vdev->bad_features ? vdev->bad_features(vdev) : 0;
}
virtio_set_features(vdev, val);
break;
case VIRTIO_PCI_QUEUE_PFN:
pa = (target_phys_addr_t)val << VIRTIO_PCI_QUEUE_ADDR_SHIFT;
if (pa == 0) {
virtio_pci_stop_ioeventfd(proxy);
virtio_reset(proxy->vdev);
msix_unuse_all_vectors(&proxy->pci_dev);
}
else
virtio_queue_set_addr(vdev, vdev->queue_sel, pa);
break;
case VIRTIO_PCI_QUEUE_SEL:
if (val < VIRTIO_PCI_QUEUE_MAX)
vdev->queue_sel = val;
break;
case VIRTIO_PCI_QUEUE_NOTIFY:
if (val < VIRTIO_PCI_QUEUE_MAX) {
virtio_queue_notify(vdev, val);
}
break;
case VIRTIO_PCI_STATUS:
if (!(val & VIRTIO_CONFIG_S_DRIVER_OK)) {
virtio_pci_stop_ioeventfd(proxy);
}
virtio_set_status(vdev, val & 0xFF);
if (val & VIRTIO_CONFIG_S_DRIVER_OK) {
virtio_pci_start_ioeventfd(proxy);
}
if (vdev->status == 0) {
virtio_reset(proxy->vdev);
msix_unuse_all_vectors(&proxy->pci_dev);
}
/* Linux before 2.6.34 sets the device as OK without enabling
the PCI device bus master bit. In this case we need to disable
some safety checks. */
if ((val & VIRTIO_CONFIG_S_DRIVER_OK) &&
!(proxy->pci_dev.config[PCI_COMMAND] & PCI_COMMAND_MASTER)) {
proxy->flags |= VIRTIO_PCI_FLAG_BUS_MASTER_BUG;
}
break;
case VIRTIO_MSI_CONFIG_VECTOR:
msix_vector_unuse(&proxy->pci_dev, vdev->config_vector);
/* Make it possible for guest to discover an error took place. */
if (msix_vector_use(&proxy->pci_dev, val) < 0)
val = VIRTIO_NO_VECTOR;
vdev->config_vector = val;
break;
case VIRTIO_MSI_QUEUE_VECTOR:
msix_vector_unuse(&proxy->pci_dev,
virtio_queue_vector(vdev, vdev->queue_sel));
/* Make it possible for guest to discover an error took place. */
if (msix_vector_use(&proxy->pci_dev, val) < 0)
val = VIRTIO_NO_VECTOR;
virtio_queue_set_vector(vdev, vdev->queue_sel, val);
break;
default:
error_report("%s: unexpected address 0x%x value 0x%x",
__func__, addr, val);
break;
}
}
static uint32_t virtio_ioport_read(VirtIOPCIProxy *proxy, uint32_t addr)
{
VirtIODevice *vdev = proxy->vdev;
uint32_t ret = 0xFFFFFFFF;
switch (addr) {
case VIRTIO_PCI_HOST_FEATURES:
ret = proxy->host_features;
break;
case VIRTIO_PCI_GUEST_FEATURES:
ret = vdev->guest_features;
break;
case VIRTIO_PCI_QUEUE_PFN:
ret = virtio_queue_get_addr(vdev, vdev->queue_sel)
>> VIRTIO_PCI_QUEUE_ADDR_SHIFT;
break;
case VIRTIO_PCI_QUEUE_NUM:
ret = virtio_queue_get_num(vdev, vdev->queue_sel);
break;
case VIRTIO_PCI_QUEUE_SEL:
ret = vdev->queue_sel;
break;
case VIRTIO_PCI_STATUS:
ret = vdev->status;
break;
case VIRTIO_PCI_ISR:
/* reading from the ISR also clears it. */
ret = vdev->isr;
vdev->isr = 0;
qemu_set_irq(proxy->pci_dev.irq[0], 0);
break;
case VIRTIO_MSI_CONFIG_VECTOR:
ret = vdev->config_vector;
break;
case VIRTIO_MSI_QUEUE_VECTOR:
ret = virtio_queue_vector(vdev, vdev->queue_sel);
break;
default:
break;
}
return ret;
}
static uint32_t virtio_pci_config_readb(void *opaque, uint32_t addr)
{
VirtIOPCIProxy *proxy = opaque;
uint32_t config = VIRTIO_PCI_CONFIG(&proxy->pci_dev);
if (addr < config)
return virtio_ioport_read(proxy, addr);
addr -= config;
return virtio_config_readb(proxy->vdev, addr);
}
static uint32_t virtio_pci_config_readw(void *opaque, uint32_t addr)
{
VirtIOPCIProxy *proxy = opaque;
uint32_t config = VIRTIO_PCI_CONFIG(&proxy->pci_dev);
uint16_t val;
if (addr < config)
return virtio_ioport_read(proxy, addr);
addr -= config;
val = virtio_config_readw(proxy->vdev, addr);
if (virtio_is_big_endian()) {
/*
* virtio is odd, ioports are LE but config space is target native
* endian. However, in qemu, all PIO is LE, so we need to re-swap
* on BE targets
*/
val = bswap16(val);
}
return val;
}
static uint32_t virtio_pci_config_readl(void *opaque, uint32_t addr)
{
VirtIOPCIProxy *proxy = opaque;
uint32_t config = VIRTIO_PCI_CONFIG(&proxy->pci_dev);
uint32_t val;
if (addr < config)
return virtio_ioport_read(proxy, addr);
addr -= config;
val = virtio_config_readl(proxy->vdev, addr);
if (virtio_is_big_endian()) {
val = bswap32(val);
}
return val;
}
static void virtio_pci_config_writeb(void *opaque, uint32_t addr, uint32_t val)
{
VirtIOPCIProxy *proxy = opaque;
uint32_t config = VIRTIO_PCI_CONFIG(&proxy->pci_dev);
if (addr < config) {
virtio_ioport_write(proxy, addr, val);
return;
}
addr -= config;
virtio_config_writeb(proxy->vdev, addr, val);
}
static void virtio_pci_config_writew(void *opaque, uint32_t addr, uint32_t val)
{
VirtIOPCIProxy *proxy = opaque;
uint32_t config = VIRTIO_PCI_CONFIG(&proxy->pci_dev);
if (addr < config) {
virtio_ioport_write(proxy, addr, val);
return;
}
addr -= config;
if (virtio_is_big_endian()) {
val = bswap16(val);
}
virtio_config_writew(proxy->vdev, addr, val);
}
static void virtio_pci_config_writel(void *opaque, uint32_t addr, uint32_t val)
{
VirtIOPCIProxy *proxy = opaque;
uint32_t config = VIRTIO_PCI_CONFIG(&proxy->pci_dev);
if (addr < config) {
virtio_ioport_write(proxy, addr, val);
return;
}
addr -= config;
if (virtio_is_big_endian()) {
val = bswap32(val);
}
virtio_config_writel(proxy->vdev, addr, val);
}
const MemoryRegionPortio virtio_portio[] = {
{ 0, 0x10000, 1, .write = virtio_pci_config_writeb, },
{ 0, 0x10000, 2, .write = virtio_pci_config_writew, },
{ 0, 0x10000, 4, .write = virtio_pci_config_writel, },
{ 0, 0x10000, 1, .read = virtio_pci_config_readb, },
{ 0, 0x10000, 2, .read = virtio_pci_config_readw, },
{ 0, 0x10000, 4, .read = virtio_pci_config_readl, },
PORTIO_END_OF_LIST()
};
static const MemoryRegionOps virtio_pci_config_ops = {
.old_portio = virtio_portio,
.endianness = DEVICE_LITTLE_ENDIAN,
};
static void virtio_write_config(PCIDevice *pci_dev, uint32_t address,
uint32_t val, int len)
{
VirtIOPCIProxy *proxy = DO_UPCAST(VirtIOPCIProxy, pci_dev, pci_dev);
pci_default_write_config(pci_dev, address, val, len);
if (range_covers_byte(address, len, PCI_COMMAND) &&
!(pci_dev->config[PCI_COMMAND] & PCI_COMMAND_MASTER) &&
!(proxy->flags & VIRTIO_PCI_FLAG_BUS_MASTER_BUG)) {
virtio_pci_stop_ioeventfd(proxy);
virtio_set_status(proxy->vdev,
proxy->vdev->status & ~VIRTIO_CONFIG_S_DRIVER_OK);
}
msix_write_config(pci_dev, address, val, len);
}
static unsigned virtio_pci_get_features(void *opaque)
{
VirtIOPCIProxy *proxy = opaque;
return proxy->host_features;
}
static void virtio_pci_guest_notifier_read(void *opaque)
{
VirtQueue *vq = opaque;
EventNotifier *n = virtio_queue_get_guest_notifier(vq);
if (event_notifier_test_and_clear(n)) {
virtio_irq(vq);
}
}
static int virtio_pci_set_guest_notifier(void *opaque, int n, bool assign)
{
VirtIOPCIProxy *proxy = opaque;
VirtQueue *vq = virtio_get_queue(proxy->vdev, n);
EventNotifier *notifier = virtio_queue_get_guest_notifier(vq);
if (assign) {
int r = event_notifier_init(notifier, 0);
if (r < 0) {
return r;
}
qemu_set_fd_handler(event_notifier_get_fd(notifier),
virtio_pci_guest_notifier_read, NULL, vq);
} else {
qemu_set_fd_handler(event_notifier_get_fd(notifier),
NULL, NULL, NULL);
event_notifier_cleanup(notifier);
}
return 0;
}
static bool virtio_pci_query_guest_notifiers(void *opaque)
{
VirtIOPCIProxy *proxy = opaque;
return msix_enabled(&proxy->pci_dev);
}
static int virtio_pci_set_guest_notifiers(void *opaque, bool assign)
{
VirtIOPCIProxy *proxy = opaque;
VirtIODevice *vdev = proxy->vdev;
int r, n;
for (n = 0; n < VIRTIO_PCI_QUEUE_MAX; n++) {
if (!virtio_queue_get_num(vdev, n)) {
break;
}
r = virtio_pci_set_guest_notifier(opaque, n, assign);
if (r < 0) {
goto assign_error;
}
}
return 0;
assign_error:
/* We get here on assignment failure. Recover by undoing for VQs 0 .. n. */
while (--n >= 0) {
virtio_pci_set_guest_notifier(opaque, n, !assign);
}
return r;
}
static int virtio_pci_set_host_notifier(void *opaque, int n, bool assign)
{
VirtIOPCIProxy *proxy = opaque;
/* Stop using ioeventfd for virtqueue kick if the device starts using host
* notifiers. This makes it easy to avoid stepping on each others' toes.
*/
proxy->ioeventfd_disabled = assign;
if (assign) {
virtio_pci_stop_ioeventfd(proxy);
}
/* We don't need to start here: it's not needed because backend
* currently only stops on status change away from ok,
* reset, vmstop and such. If we do add code to start here,
* need to check vmstate, device state etc. */
return virtio_pci_set_host_notifier_internal(proxy, n, assign);
}
static void virtio_pci_vmstate_change(void *opaque, bool running)
{
VirtIOPCIProxy *proxy = opaque;
if (running) {
/* Try to find out if the guest has bus master disabled, but is
in ready state. Then we have a buggy guest OS. */
if ((proxy->vdev->status & VIRTIO_CONFIG_S_DRIVER_OK) &&
!(proxy->pci_dev.config[PCI_COMMAND] & PCI_COMMAND_MASTER)) {
proxy->flags |= VIRTIO_PCI_FLAG_BUS_MASTER_BUG;
}
virtio_pci_start_ioeventfd(proxy);
} else {
virtio_pci_stop_ioeventfd(proxy);
}
}
static const VirtIOBindings virtio_pci_bindings = {
.notify = virtio_pci_notify,
.save_config = virtio_pci_save_config,
.load_config = virtio_pci_load_config,
.save_queue = virtio_pci_save_queue,
.load_queue = virtio_pci_load_queue,
.get_features = virtio_pci_get_features,
.query_guest_notifiers = virtio_pci_query_guest_notifiers,
.set_host_notifier = virtio_pci_set_host_notifier,
.set_guest_notifiers = virtio_pci_set_guest_notifiers,
.vmstate_change = virtio_pci_vmstate_change,
};
void virtio_init_pci(VirtIOPCIProxy *proxy, VirtIODevice *vdev)
{
uint8_t *config;
uint32_t size;
proxy->vdev = vdev;
config = proxy->pci_dev.config;
if (proxy->class_code) {
pci_config_set_class(config, proxy->class_code);
}
pci_set_word(config + PCI_SUBSYSTEM_VENDOR_ID,
pci_get_word(config + PCI_VENDOR_ID));
pci_set_word(config + PCI_SUBSYSTEM_ID, vdev->device_id);
config[PCI_INTERRUPT_PIN] = 1;
memory_region_init(&proxy->msix_bar, "virtio-msix", 4096);
if (vdev->nvectors && !msix_init(&proxy->pci_dev, vdev->nvectors,
&proxy->msix_bar, 1, 0)) {
pci_register_bar(&proxy->pci_dev, 1, PCI_BASE_ADDRESS_SPACE_MEMORY,
&proxy->msix_bar);
} else
vdev->nvectors = 0;
proxy->pci_dev.config_write = virtio_write_config;
size = VIRTIO_PCI_REGION_SIZE(&proxy->pci_dev) + vdev->config_len;
if (size & (size-1))
size = 1 << qemu_fls(size);
memory_region_init_io(&proxy->bar, &virtio_pci_config_ops, proxy,
"virtio-pci", size);
pci_register_bar(&proxy->pci_dev, 0, PCI_BASE_ADDRESS_SPACE_IO,
&proxy->bar);
if (!kvm_has_many_ioeventfds()) {
proxy->flags &= ~VIRTIO_PCI_FLAG_USE_IOEVENTFD;
}
virtio_bind_device(vdev, &virtio_pci_bindings, proxy);
proxy->host_features |= 0x1 << VIRTIO_F_NOTIFY_ON_EMPTY;
proxy->host_features |= 0x1 << VIRTIO_F_BAD_FEATURE;
proxy->host_features = vdev->get_features(vdev, proxy->host_features);
}
static int virtio_blk_init_pci(PCIDevice *pci_dev)
{
VirtIOPCIProxy *proxy = DO_UPCAST(VirtIOPCIProxy, pci_dev, pci_dev);
VirtIODevice *vdev;
if (proxy->class_code != PCI_CLASS_STORAGE_SCSI &&
proxy->class_code != PCI_CLASS_STORAGE_OTHER)
proxy->class_code = PCI_CLASS_STORAGE_SCSI;
vdev = virtio_blk_init(&pci_dev->qdev, &proxy->block,
&proxy->block_serial);
if (!vdev) {
return -1;
}
vdev->nvectors = proxy->nvectors;
virtio_init_pci(proxy, vdev);
/* make the actual value visible */
proxy->nvectors = vdev->nvectors;
return 0;
}
static int virtio_exit_pci(PCIDevice *pci_dev)
{
VirtIOPCIProxy *proxy = DO_UPCAST(VirtIOPCIProxy, pci_dev, pci_dev);
int r;
memory_region_destroy(&proxy->bar);
r = msix_uninit(pci_dev, &proxy->msix_bar);
memory_region_destroy(&proxy->msix_bar);
return r;
}
static int virtio_blk_exit_pci(PCIDevice *pci_dev)
{
VirtIOPCIProxy *proxy = DO_UPCAST(VirtIOPCIProxy, pci_dev, pci_dev);
virtio_pci_stop_ioeventfd(proxy);
virtio_blk_exit(proxy->vdev);
blockdev_mark_auto_del(proxy->block.bs);
return virtio_exit_pci(pci_dev);
}
static int virtio_serial_init_pci(PCIDevice *pci_dev)
{
VirtIOPCIProxy *proxy = DO_UPCAST(VirtIOPCIProxy, pci_dev, pci_dev);
VirtIODevice *vdev;
if (proxy->class_code != PCI_CLASS_COMMUNICATION_OTHER &&
proxy->class_code != PCI_CLASS_DISPLAY_OTHER && /* qemu 0.10 */
proxy->class_code != PCI_CLASS_OTHERS) /* qemu-kvm */
proxy->class_code = PCI_CLASS_COMMUNICATION_OTHER;
vdev = virtio_serial_init(&pci_dev->qdev, &proxy->serial);
if (!vdev) {
return -1;
}
vdev->nvectors = proxy->nvectors == DEV_NVECTORS_UNSPECIFIED
? proxy->serial.max_virtserial_ports + 1
: proxy->nvectors;
virtio_init_pci(proxy, vdev);
proxy->nvectors = vdev->nvectors;
return 0;
}
static int virtio_serial_exit_pci(PCIDevice *pci_dev)
{
VirtIOPCIProxy *proxy = DO_UPCAST(VirtIOPCIProxy, pci_dev, pci_dev);
virtio_pci_stop_ioeventfd(proxy);
virtio_serial_exit(proxy->vdev);
return virtio_exit_pci(pci_dev);
}
static int virtio_net_init_pci(PCIDevice *pci_dev)
{
VirtIOPCIProxy *proxy = DO_UPCAST(VirtIOPCIProxy, pci_dev, pci_dev);
VirtIODevice *vdev;
vdev = virtio_net_init(&pci_dev->qdev, &proxy->nic, &proxy->net);
vdev->nvectors = proxy->nvectors;
virtio_init_pci(proxy, vdev);
/* make the actual value visible */
proxy->nvectors = vdev->nvectors;
return 0;
}
static int virtio_net_exit_pci(PCIDevice *pci_dev)
{
VirtIOPCIProxy *proxy = DO_UPCAST(VirtIOPCIProxy, pci_dev, pci_dev);
virtio_pci_stop_ioeventfd(proxy);
virtio_net_exit(proxy->vdev);
return virtio_exit_pci(pci_dev);
}
static int virtio_balloon_init_pci(PCIDevice *pci_dev)
{
VirtIOPCIProxy *proxy = DO_UPCAST(VirtIOPCIProxy, pci_dev, pci_dev);
VirtIODevice *vdev;
vdev = virtio_balloon_init(&pci_dev->qdev);
if (!vdev) {
return -1;
}
virtio_init_pci(proxy, vdev);
return 0;
}
static int virtio_balloon_exit_pci(PCIDevice *pci_dev)
{
VirtIOPCIProxy *proxy = DO_UPCAST(VirtIOPCIProxy, pci_dev, pci_dev);
virtio_pci_stop_ioeventfd(proxy);
virtio_balloon_exit(proxy->vdev);
return virtio_exit_pci(pci_dev);
}
static Property virtio_blk_properties[] = {
DEFINE_PROP_HEX32("class", VirtIOPCIProxy, class_code, 0),
DEFINE_BLOCK_PROPERTIES(VirtIOPCIProxy, block),
DEFINE_PROP_STRING("serial", VirtIOPCIProxy, block_serial),
DEFINE_PROP_BIT("ioeventfd", VirtIOPCIProxy, flags, VIRTIO_PCI_FLAG_USE_IOEVENTFD_BIT, true),
DEFINE_PROP_UINT32("vectors", VirtIOPCIProxy, nvectors, 2),
DEFINE_VIRTIO_BLK_FEATURES(VirtIOPCIProxy, host_features),
DEFINE_PROP_END_OF_LIST(),
};
static void virtio_blk_class_init(ObjectClass *klass, void *data)
{
DeviceClass *dc = DEVICE_CLASS(klass);
PCIDeviceClass *k = PCI_DEVICE_CLASS(klass);
k->init = virtio_blk_init_pci;
k->exit = virtio_blk_exit_pci;
k->vendor_id = PCI_VENDOR_ID_REDHAT_QUMRANET;
k->device_id = PCI_DEVICE_ID_VIRTIO_BLOCK;
k->revision = VIRTIO_PCI_ABI_VERSION;
k->class_id = PCI_CLASS_STORAGE_SCSI;
dc->reset = virtio_pci_reset;
dc->props = virtio_blk_properties;
}
static TypeInfo virtio_blk_info = {
.name = "virtio-blk-pci",
.parent = TYPE_PCI_DEVICE,
.instance_size = sizeof(VirtIOPCIProxy),
.class_init = virtio_blk_class_init,
};
static Property virtio_net_properties[] = {
DEFINE_PROP_BIT("ioeventfd", VirtIOPCIProxy, flags, VIRTIO_PCI_FLAG_USE_IOEVENTFD_BIT, false),
DEFINE_PROP_UINT32("vectors", VirtIOPCIProxy, nvectors, 3),
DEFINE_VIRTIO_NET_FEATURES(VirtIOPCIProxy, host_features),
DEFINE_NIC_PROPERTIES(VirtIOPCIProxy, nic),
DEFINE_PROP_UINT32("x-txtimer", VirtIOPCIProxy, net.txtimer, TX_TIMER_INTERVAL),
DEFINE_PROP_INT32("x-txburst", VirtIOPCIProxy, net.txburst, TX_BURST),
DEFINE_PROP_STRING("tx", VirtIOPCIProxy, net.tx),
DEFINE_PROP_END_OF_LIST(),
};
static void virtio_net_class_init(ObjectClass *klass, void *data)
{
DeviceClass *dc = DEVICE_CLASS(klass);
PCIDeviceClass *k = PCI_DEVICE_CLASS(klass);
k->init = virtio_net_init_pci;
k->exit = virtio_net_exit_pci;
k->romfile = "pxe-virtio.rom";
k->vendor_id = PCI_VENDOR_ID_REDHAT_QUMRANET;
k->device_id = PCI_DEVICE_ID_VIRTIO_NET;
k->revision = VIRTIO_PCI_ABI_VERSION;
k->class_id = PCI_CLASS_NETWORK_ETHERNET;
dc->reset = virtio_pci_reset;
dc->props = virtio_net_properties;
}
static TypeInfo virtio_net_info = {
.name = "virtio-net-pci",
.parent = TYPE_PCI_DEVICE,
.instance_size = sizeof(VirtIOPCIProxy),
.class_init = virtio_net_class_init,
};
static Property virtio_serial_properties[] = {
DEFINE_PROP_BIT("ioeventfd", VirtIOPCIProxy, flags, VIRTIO_PCI_FLAG_USE_IOEVENTFD_BIT, true),
DEFINE_PROP_UINT32("vectors", VirtIOPCIProxy, nvectors, DEV_NVECTORS_UNSPECIFIED),
DEFINE_PROP_HEX32("class", VirtIOPCIProxy, class_code, 0),
DEFINE_VIRTIO_COMMON_FEATURES(VirtIOPCIProxy, host_features),
DEFINE_PROP_UINT32("max_ports", VirtIOPCIProxy, serial.max_virtserial_ports, 31),
DEFINE_PROP_END_OF_LIST(),
};
static void virtio_serial_class_init(ObjectClass *klass, void *data)
{
DeviceClass *dc = DEVICE_CLASS(klass);
PCIDeviceClass *k = PCI_DEVICE_CLASS(klass);
k->init = virtio_serial_init_pci;
k->exit = virtio_serial_exit_pci;
k->vendor_id = PCI_VENDOR_ID_REDHAT_QUMRANET;
k->device_id = PCI_DEVICE_ID_VIRTIO_CONSOLE;
k->revision = VIRTIO_PCI_ABI_VERSION;
k->class_id = PCI_CLASS_COMMUNICATION_OTHER;
dc->reset = virtio_pci_reset;
dc->props = virtio_serial_properties;
}
static TypeInfo virtio_serial_info = {
.name = "virtio-serial-pci",
.parent = TYPE_PCI_DEVICE,
.instance_size = sizeof(VirtIOPCIProxy),
.class_init = virtio_serial_class_init,
};
static Property virtio_balloon_properties[] = {
DEFINE_VIRTIO_COMMON_FEATURES(VirtIOPCIProxy, host_features),
DEFINE_PROP_END_OF_LIST(),
};
static void virtio_balloon_class_init(ObjectClass *klass, void *data)
{
DeviceClass *dc = DEVICE_CLASS(klass);
PCIDeviceClass *k = PCI_DEVICE_CLASS(klass);
k->init = virtio_balloon_init_pci;
k->exit = virtio_balloon_exit_pci;
k->vendor_id = PCI_VENDOR_ID_REDHAT_QUMRANET;
k->device_id = PCI_DEVICE_ID_VIRTIO_BALLOON;
k->revision = VIRTIO_PCI_ABI_VERSION;
k->class_id = PCI_CLASS_MEMORY_RAM;
dc->reset = virtio_pci_reset;
dc->props = virtio_balloon_properties;
}
static TypeInfo virtio_balloon_info = {
.name = "virtio-balloon-pci",
.parent = TYPE_PCI_DEVICE,
.instance_size = sizeof(VirtIOPCIProxy),
.class_init = virtio_balloon_class_init,
};
static void virtio_pci_register_devices(void)
{
type_register_static(&virtio_blk_info);
type_register_static(&virtio_net_info);
type_register_static(&virtio_serial_info);
type_register_static(&virtio_balloon_info);
}
device_init(virtio_pci_register_devices)
Reference in New Issue View Git Blame Copy Permalink