qemu/hw/sh_serial.c
balrog 5c16736a37 SH4: Eliminate P4 to A7 mangling (Takashi YOSHII).
Main purpose of this is to delete
       *physical = address & 0x1fffffff;
at target-sh4/helper.c:449, using new mmio rule introduced by #5849
This masking is a nice trick to realize P4/A7 duality of SH registers.
But, IMHO, it is logically wrong.

Most of SH4 cpu control registers in P4 area(0xfc000000...0xffffffff) have
one more address called A7 which is usually P4 address with upper 3bits masked.
This is an address only appears in TLB's physical address part.

Current code use trick writing drivers as if they are really in A7
(that's why you see many *_A7 in hw/sh*.c), and using translation P4 to A7.

Signed-off-by: Takashi YOSHII <takasi-y@ops.dti.ne.jp>
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5935 c046a42c-6fe2-441c-8c8c-71466251a162
2008-12-07 19:39:58 +00:00

417 lines
10 KiB
C

/*
* QEMU SCI/SCIF serial port emulation
*
* Copyright (c) 2007 Magnus Damm
*
* Based on serial.c - QEMU 16450 UART emulation
* Copyright (c) 2003-2004 Fabrice Bellard
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#include "hw.h"
#include "sh.h"
#include "qemu-char.h"
#include <assert.h>
//#define DEBUG_SERIAL
#define SH_SERIAL_FLAG_TEND (1 << 0)
#define SH_SERIAL_FLAG_TDE (1 << 1)
#define SH_SERIAL_FLAG_RDF (1 << 2)
#define SH_SERIAL_FLAG_BRK (1 << 3)
#define SH_SERIAL_FLAG_DR (1 << 4)
#define SH_RX_FIFO_LENGTH (16)
typedef struct {
uint8_t smr;
uint8_t brr;
uint8_t scr;
uint8_t dr; /* ftdr / tdr */
uint8_t sr; /* fsr / ssr */
uint16_t fcr;
uint8_t sptr;
uint8_t rx_fifo[SH_RX_FIFO_LENGTH]; /* frdr / rdr */
uint8_t rx_cnt;
uint8_t rx_tail;
uint8_t rx_head;
int freq;
int feat;
int flags;
int rtrg;
CharDriverState *chr;
qemu_irq eri;
qemu_irq rxi;
qemu_irq txi;
qemu_irq tei;
qemu_irq bri;
} sh_serial_state;
static void sh_serial_clear_fifo(sh_serial_state * s)
{
memset(s->rx_fifo, 0, SH_RX_FIFO_LENGTH);
s->rx_cnt = 0;
s->rx_head = 0;
s->rx_tail = 0;
}
static void sh_serial_ioport_write(void *opaque, uint32_t offs, uint32_t val)
{
sh_serial_state *s = opaque;
unsigned char ch;
#ifdef DEBUG_SERIAL
printf("sh_serial: write offs=0x%02x val=0x%02x\n",
offs, val);
#endif
switch(offs) {
case 0x00: /* SMR */
s->smr = val & ((s->feat & SH_SERIAL_FEAT_SCIF) ? 0x7b : 0xff);
return;
case 0x04: /* BRR */
s->brr = val;
return;
case 0x08: /* SCR */
/* TODO : For SH7751, SCIF mask should be 0xfb. */
s->scr = val & ((s->feat & SH_SERIAL_FEAT_SCIF) ? 0xfa : 0xff);
if (!(val & (1 << 5)))
s->flags |= SH_SERIAL_FLAG_TEND;
if ((s->feat & SH_SERIAL_FEAT_SCIF) && s->txi) {
qemu_set_irq(s->txi, val & (1 << 7));
}
if (!(val & (1 << 6))) {
qemu_set_irq(s->rxi, 0);
}
return;
case 0x0c: /* FTDR / TDR */
if (s->chr) {
ch = val;
qemu_chr_write(s->chr, &ch, 1);
}
s->dr = val;
s->flags &= ~SH_SERIAL_FLAG_TDE;
return;
#if 0
case 0x14: /* FRDR / RDR */
ret = 0;
break;
#endif
}
if (s->feat & SH_SERIAL_FEAT_SCIF) {
switch(offs) {
case 0x10: /* FSR */
if (!(val & (1 << 6)))
s->flags &= ~SH_SERIAL_FLAG_TEND;
if (!(val & (1 << 5)))
s->flags &= ~SH_SERIAL_FLAG_TDE;
if (!(val & (1 << 4)))
s->flags &= ~SH_SERIAL_FLAG_BRK;
if (!(val & (1 << 1)))
s->flags &= ~SH_SERIAL_FLAG_RDF;
if (!(val & (1 << 0)))
s->flags &= ~SH_SERIAL_FLAG_DR;
if (!(val & (1 << 1)) || !(val & (1 << 0))) {
if (s->rxi) {
qemu_set_irq(s->rxi, 0);
}
}
return;
case 0x18: /* FCR */
s->fcr = val;
switch ((val >> 6) & 3) {
case 0:
s->rtrg = 1;
break;
case 1:
s->rtrg = 4;
break;
case 2:
s->rtrg = 8;
break;
case 3:
s->rtrg = 14;
break;
}
if (val & (1 << 1)) {
sh_serial_clear_fifo(s);
s->sr &= ~(1 << 1);
}
return;
case 0x20: /* SPTR */
s->sptr = val & 0xf3;
return;
case 0x24: /* LSR */
return;
}
}
else {
#if 0
switch(offs) {
case 0x0c:
ret = s->dr;
break;
case 0x10:
ret = 0;
break;
case 0x1c:
ret = s->sptr;
break;
}
#endif
}
fprintf(stderr, "sh_serial: unsupported write to 0x%02x\n", offs);
assert(0);
}
static uint32_t sh_serial_ioport_read(void *opaque, uint32_t offs)
{
sh_serial_state *s = opaque;
uint32_t ret = ~0;
#if 0
switch(offs) {
case 0x00:
ret = s->smr;
break;
case 0x04:
ret = s->brr;
break;
case 0x08:
ret = s->scr;
break;
case 0x14:
ret = 0;
break;
}
#endif
if (s->feat & SH_SERIAL_FEAT_SCIF) {
switch(offs) {
case 0x00: /* SMR */
ret = s->smr;
break;
case 0x08: /* SCR */
ret = s->scr;
break;
case 0x10: /* FSR */
ret = 0;
if (s->flags & SH_SERIAL_FLAG_TEND)
ret |= (1 << 6);
if (s->flags & SH_SERIAL_FLAG_TDE)
ret |= (1 << 5);
if (s->flags & SH_SERIAL_FLAG_BRK)
ret |= (1 << 4);
if (s->flags & SH_SERIAL_FLAG_RDF)
ret |= (1 << 1);
if (s->flags & SH_SERIAL_FLAG_DR)
ret |= (1 << 0);
if (s->scr & (1 << 5))
s->flags |= SH_SERIAL_FLAG_TDE | SH_SERIAL_FLAG_TEND;
break;
case 0x14:
if (s->rx_cnt > 0) {
ret = s->rx_fifo[s->rx_tail++];
s->rx_cnt--;
if (s->rx_tail == SH_RX_FIFO_LENGTH)
s->rx_tail = 0;
if (s->rx_cnt < s->rtrg)
s->flags &= ~SH_SERIAL_FLAG_RDF;
}
break;
#if 0
case 0x18:
ret = s->fcr;
break;
#endif
case 0x1c:
ret = s->rx_cnt;
break;
case 0x20:
ret = s->sptr;
break;
case 0x24:
ret = 0;
break;
}
}
else {
#if 0
switch(offs) {
case 0x0c:
ret = s->dr;
break;
case 0x10:
ret = 0;
break;
case 0x14:
ret = s->rx_fifo[0];
break;
case 0x1c:
ret = s->sptr;
break;
}
#endif
}
#ifdef DEBUG_SERIAL
printf("sh_serial: read offs=0x%02x val=0x%x\n",
offs, ret);
#endif
if (ret & ~((1 << 16) - 1)) {
fprintf(stderr, "sh_serial: unsupported read from 0x%02x\n", offs);
assert(0);
}
return ret;
}
static int sh_serial_can_receive(sh_serial_state *s)
{
return s->scr & (1 << 4);
}
static void sh_serial_receive_byte(sh_serial_state *s, int ch)
{
if (s->feat & SH_SERIAL_FEAT_SCIF) {
if (s->rx_cnt < SH_RX_FIFO_LENGTH) {
s->rx_fifo[s->rx_head++] = ch;
if (s->rx_head == SH_RX_FIFO_LENGTH)
s->rx_head = 0;
s->rx_cnt++;
if (s->rx_cnt >= s->rtrg) {
s->flags |= SH_SERIAL_FLAG_RDF;
if (s->scr & (1 << 6) && s->rxi) {
qemu_set_irq(s->rxi, 1);
}
}
}
} else {
s->rx_fifo[0] = ch;
}
}
static void sh_serial_receive_break(sh_serial_state *s)
{
if (s->feat & SH_SERIAL_FEAT_SCIF)
s->sr |= (1 << 4);
}
static int sh_serial_can_receive1(void *opaque)
{
sh_serial_state *s = opaque;
return sh_serial_can_receive(s);
}
static void sh_serial_receive1(void *opaque, const uint8_t *buf, int size)
{
sh_serial_state *s = opaque;
sh_serial_receive_byte(s, buf[0]);
}
static void sh_serial_event(void *opaque, int event)
{
sh_serial_state *s = opaque;
if (event == CHR_EVENT_BREAK)
sh_serial_receive_break(s);
}
static uint32_t sh_serial_read (void *opaque, target_phys_addr_t addr)
{
sh_serial_state *s = opaque;
return sh_serial_ioport_read(s, addr);
}
static void sh_serial_write (void *opaque,
target_phys_addr_t addr, uint32_t value)
{
sh_serial_state *s = opaque;
sh_serial_ioport_write(s, addr, value);
}
static CPUReadMemoryFunc *sh_serial_readfn[] = {
&sh_serial_read,
&sh_serial_read,
&sh_serial_read,
};
static CPUWriteMemoryFunc *sh_serial_writefn[] = {
&sh_serial_write,
&sh_serial_write,
&sh_serial_write,
};
void sh_serial_init (target_phys_addr_t base, int feat,
uint32_t freq, CharDriverState *chr,
qemu_irq eri_source,
qemu_irq rxi_source,
qemu_irq txi_source,
qemu_irq tei_source,
qemu_irq bri_source)
{
sh_serial_state *s;
int s_io_memory;
s = qemu_mallocz(sizeof(sh_serial_state));
if (!s)
return;
s->feat = feat;
s->flags = SH_SERIAL_FLAG_TEND | SH_SERIAL_FLAG_TDE;
s->rtrg = 1;
s->smr = 0;
s->brr = 0xff;
s->scr = 1 << 5; /* pretend that TX is enabled so early printk works */
s->sptr = 0;
if (feat & SH_SERIAL_FEAT_SCIF) {
s->fcr = 0;
}
else {
s->dr = 0xff;
}
sh_serial_clear_fifo(s);
s_io_memory = cpu_register_io_memory(0, sh_serial_readfn,
sh_serial_writefn, s);
cpu_register_physical_memory(P4ADDR(base), 0x28, s_io_memory);
cpu_register_physical_memory(A7ADDR(base), 0x28, s_io_memory);
s->chr = chr;
if (chr)
qemu_chr_add_handlers(chr, sh_serial_can_receive1, sh_serial_receive1,
sh_serial_event, s);
s->eri = eri_source;
s->rxi = rxi_source;
s->txi = txi_source;
s->tei = tei_source;
s->bri = bri_source;
}