c1bb5418e3
The IOAPIC has an 'Extended Destination ID' field in its RTE, which maps to bits 11-4 of the MSI address. Since those address bits fall within a given 4KiB page they were historically non-trivial to use on real hardware. The Intel IOMMU uses the lowest bit to indicate a remappable format MSI, and then the remaining 7 bits are part of the index. Where the remappable format bit isn't set, we can actually use the other seven to allow external (IOAPIC and MSI) interrupts to reach up to 32768 CPUs instead of just the 255 permitted on bare metal. Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Message-Id: <78097f9218300e63e751e077a0a5ca029b56ba46.camel@infradead.org> [Fix UBSAN warning. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
1784 lines
59 KiB
C
1784 lines
59 KiB
C
/*
|
|
* QEMU PC System Emulator
|
|
*
|
|
* Copyright (c) 2003-2004 Fabrice Bellard
|
|
*
|
|
* Permission is hereby granted, free of charge, to any person obtaining a copy
|
|
* of this software and associated documentation files (the "Software"), to deal
|
|
* in the Software without restriction, including without limitation the rights
|
|
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
|
|
* copies of the Software, and to permit persons to whom the Software is
|
|
* furnished to do so, subject to the following conditions:
|
|
*
|
|
* The above copyright notice and this permission notice shall be included in
|
|
* all copies or substantial portions of the Software.
|
|
*
|
|
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
|
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
|
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
|
|
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
|
|
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
|
|
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
|
|
* THE SOFTWARE.
|
|
*/
|
|
|
|
#include "qemu/osdep.h"
|
|
#include "qemu/units.h"
|
|
#include "hw/i386/x86.h"
|
|
#include "hw/i386/pc.h"
|
|
#include "hw/char/serial.h"
|
|
#include "hw/char/parallel.h"
|
|
#include "hw/i386/apic.h"
|
|
#include "hw/i386/topology.h"
|
|
#include "hw/i386/fw_cfg.h"
|
|
#include "hw/i386/vmport.h"
|
|
#include "sysemu/cpus.h"
|
|
#include "hw/block/fdc.h"
|
|
#include "hw/ide.h"
|
|
#include "hw/pci/pci.h"
|
|
#include "hw/pci/pci_bus.h"
|
|
#include "hw/nvram/fw_cfg.h"
|
|
#include "hw/timer/hpet.h"
|
|
#include "hw/firmware/smbios.h"
|
|
#include "hw/loader.h"
|
|
#include "elf.h"
|
|
#include "migration/vmstate.h"
|
|
#include "multiboot.h"
|
|
#include "hw/rtc/mc146818rtc.h"
|
|
#include "hw/intc/i8259.h"
|
|
#include "hw/dma/i8257.h"
|
|
#include "hw/timer/i8254.h"
|
|
#include "hw/input/i8042.h"
|
|
#include "hw/irq.h"
|
|
#include "hw/audio/pcspk.h"
|
|
#include "hw/pci/msi.h"
|
|
#include "hw/sysbus.h"
|
|
#include "sysemu/sysemu.h"
|
|
#include "sysemu/tcg.h"
|
|
#include "sysemu/numa.h"
|
|
#include "sysemu/kvm.h"
|
|
#include "sysemu/xen.h"
|
|
#include "sysemu/qtest.h"
|
|
#include "sysemu/reset.h"
|
|
#include "sysemu/runstate.h"
|
|
#include "kvm_i386.h"
|
|
#include "hw/xen/xen.h"
|
|
#include "hw/xen/start_info.h"
|
|
#include "ui/qemu-spice.h"
|
|
#include "exec/memory.h"
|
|
#include "exec/address-spaces.h"
|
|
#include "sysemu/arch_init.h"
|
|
#include "qemu/bitmap.h"
|
|
#include "qemu/config-file.h"
|
|
#include "qemu/error-report.h"
|
|
#include "qemu/option.h"
|
|
#include "qemu/cutils.h"
|
|
#include "hw/acpi/acpi.h"
|
|
#include "hw/acpi/cpu_hotplug.h"
|
|
#include "hw/boards.h"
|
|
#include "acpi-build.h"
|
|
#include "hw/mem/pc-dimm.h"
|
|
#include "hw/mem/nvdimm.h"
|
|
#include "qapi/error.h"
|
|
#include "qapi/qapi-visit-common.h"
|
|
#include "qapi/visitor.h"
|
|
#include "hw/core/cpu.h"
|
|
#include "hw/usb.h"
|
|
#include "hw/i386/intel_iommu.h"
|
|
#include "hw/net/ne2000-isa.h"
|
|
#include "standard-headers/asm-x86/bootparam.h"
|
|
#include "hw/virtio/virtio-pmem-pci.h"
|
|
#include "hw/virtio/virtio-mem-pci.h"
|
|
#include "hw/mem/memory-device.h"
|
|
#include "sysemu/replay.h"
|
|
#include "qapi/qmp/qerror.h"
|
|
#include "e820_memory_layout.h"
|
|
#include "fw_cfg.h"
|
|
#include "trace.h"
|
|
#include CONFIG_DEVICES
|
|
|
|
GlobalProperty pc_compat_5_2[] = {
|
|
{ "ICH9-LPC", "x-smi-cpu-hotunplug", "off" },
|
|
};
|
|
const size_t pc_compat_5_2_len = G_N_ELEMENTS(pc_compat_5_2);
|
|
|
|
GlobalProperty pc_compat_5_1[] = {
|
|
{ "ICH9-LPC", "x-smi-cpu-hotplug", "off" },
|
|
{ TYPE_X86_CPU, "kvm-msi-ext-dest-id", "off" },
|
|
};
|
|
const size_t pc_compat_5_1_len = G_N_ELEMENTS(pc_compat_5_1);
|
|
|
|
GlobalProperty pc_compat_5_0[] = {
|
|
};
|
|
const size_t pc_compat_5_0_len = G_N_ELEMENTS(pc_compat_5_0);
|
|
|
|
GlobalProperty pc_compat_4_2[] = {
|
|
{ "mch", "smbase-smram", "off" },
|
|
};
|
|
const size_t pc_compat_4_2_len = G_N_ELEMENTS(pc_compat_4_2);
|
|
|
|
GlobalProperty pc_compat_4_1[] = {};
|
|
const size_t pc_compat_4_1_len = G_N_ELEMENTS(pc_compat_4_1);
|
|
|
|
GlobalProperty pc_compat_4_0[] = {};
|
|
const size_t pc_compat_4_0_len = G_N_ELEMENTS(pc_compat_4_0);
|
|
|
|
GlobalProperty pc_compat_3_1[] = {
|
|
{ "intel-iommu", "dma-drain", "off" },
|
|
{ "Opteron_G3" "-" TYPE_X86_CPU, "rdtscp", "off" },
|
|
{ "Opteron_G4" "-" TYPE_X86_CPU, "rdtscp", "off" },
|
|
{ "Opteron_G4" "-" TYPE_X86_CPU, "npt", "off" },
|
|
{ "Opteron_G4" "-" TYPE_X86_CPU, "nrip-save", "off" },
|
|
{ "Opteron_G5" "-" TYPE_X86_CPU, "rdtscp", "off" },
|
|
{ "Opteron_G5" "-" TYPE_X86_CPU, "npt", "off" },
|
|
{ "Opteron_G5" "-" TYPE_X86_CPU, "nrip-save", "off" },
|
|
{ "EPYC" "-" TYPE_X86_CPU, "npt", "off" },
|
|
{ "EPYC" "-" TYPE_X86_CPU, "nrip-save", "off" },
|
|
{ "EPYC-IBPB" "-" TYPE_X86_CPU, "npt", "off" },
|
|
{ "EPYC-IBPB" "-" TYPE_X86_CPU, "nrip-save", "off" },
|
|
{ "Skylake-Client" "-" TYPE_X86_CPU, "mpx", "on" },
|
|
{ "Skylake-Client-IBRS" "-" TYPE_X86_CPU, "mpx", "on" },
|
|
{ "Skylake-Server" "-" TYPE_X86_CPU, "mpx", "on" },
|
|
{ "Skylake-Server-IBRS" "-" TYPE_X86_CPU, "mpx", "on" },
|
|
{ "Cascadelake-Server" "-" TYPE_X86_CPU, "mpx", "on" },
|
|
{ "Icelake-Client" "-" TYPE_X86_CPU, "mpx", "on" },
|
|
{ "Icelake-Server" "-" TYPE_X86_CPU, "mpx", "on" },
|
|
{ "Cascadelake-Server" "-" TYPE_X86_CPU, "stepping", "5" },
|
|
{ TYPE_X86_CPU, "x-intel-pt-auto-level", "off" },
|
|
};
|
|
const size_t pc_compat_3_1_len = G_N_ELEMENTS(pc_compat_3_1);
|
|
|
|
GlobalProperty pc_compat_3_0[] = {
|
|
{ TYPE_X86_CPU, "x-hv-synic-kvm-only", "on" },
|
|
{ "Skylake-Server" "-" TYPE_X86_CPU, "pku", "off" },
|
|
{ "Skylake-Server-IBRS" "-" TYPE_X86_CPU, "pku", "off" },
|
|
};
|
|
const size_t pc_compat_3_0_len = G_N_ELEMENTS(pc_compat_3_0);
|
|
|
|
GlobalProperty pc_compat_2_12[] = {
|
|
{ TYPE_X86_CPU, "legacy-cache", "on" },
|
|
{ TYPE_X86_CPU, "topoext", "off" },
|
|
{ "EPYC-" TYPE_X86_CPU, "xlevel", "0x8000000a" },
|
|
{ "EPYC-IBPB-" TYPE_X86_CPU, "xlevel", "0x8000000a" },
|
|
};
|
|
const size_t pc_compat_2_12_len = G_N_ELEMENTS(pc_compat_2_12);
|
|
|
|
GlobalProperty pc_compat_2_11[] = {
|
|
{ TYPE_X86_CPU, "x-migrate-smi-count", "off" },
|
|
{ "Skylake-Server" "-" TYPE_X86_CPU, "clflushopt", "off" },
|
|
};
|
|
const size_t pc_compat_2_11_len = G_N_ELEMENTS(pc_compat_2_11);
|
|
|
|
GlobalProperty pc_compat_2_10[] = {
|
|
{ TYPE_X86_CPU, "x-hv-max-vps", "0x40" },
|
|
{ "i440FX-pcihost", "x-pci-hole64-fix", "off" },
|
|
{ "q35-pcihost", "x-pci-hole64-fix", "off" },
|
|
};
|
|
const size_t pc_compat_2_10_len = G_N_ELEMENTS(pc_compat_2_10);
|
|
|
|
GlobalProperty pc_compat_2_9[] = {
|
|
{ "mch", "extended-tseg-mbytes", "0" },
|
|
};
|
|
const size_t pc_compat_2_9_len = G_N_ELEMENTS(pc_compat_2_9);
|
|
|
|
GlobalProperty pc_compat_2_8[] = {
|
|
{ TYPE_X86_CPU, "tcg-cpuid", "off" },
|
|
{ "kvmclock", "x-mach-use-reliable-get-clock", "off" },
|
|
{ "ICH9-LPC", "x-smi-broadcast", "off" },
|
|
{ TYPE_X86_CPU, "vmware-cpuid-freq", "off" },
|
|
{ "Haswell-" TYPE_X86_CPU, "stepping", "1" },
|
|
};
|
|
const size_t pc_compat_2_8_len = G_N_ELEMENTS(pc_compat_2_8);
|
|
|
|
GlobalProperty pc_compat_2_7[] = {
|
|
{ TYPE_X86_CPU, "l3-cache", "off" },
|
|
{ TYPE_X86_CPU, "full-cpuid-auto-level", "off" },
|
|
{ "Opteron_G3" "-" TYPE_X86_CPU, "family", "15" },
|
|
{ "Opteron_G3" "-" TYPE_X86_CPU, "model", "6" },
|
|
{ "Opteron_G3" "-" TYPE_X86_CPU, "stepping", "1" },
|
|
{ "isa-pcspk", "migrate", "off" },
|
|
};
|
|
const size_t pc_compat_2_7_len = G_N_ELEMENTS(pc_compat_2_7);
|
|
|
|
GlobalProperty pc_compat_2_6[] = {
|
|
{ TYPE_X86_CPU, "cpuid-0xb", "off" },
|
|
{ "vmxnet3", "romfile", "" },
|
|
{ TYPE_X86_CPU, "fill-mtrr-mask", "off" },
|
|
{ "apic-common", "legacy-instance-id", "on", }
|
|
};
|
|
const size_t pc_compat_2_6_len = G_N_ELEMENTS(pc_compat_2_6);
|
|
|
|
GlobalProperty pc_compat_2_5[] = {};
|
|
const size_t pc_compat_2_5_len = G_N_ELEMENTS(pc_compat_2_5);
|
|
|
|
GlobalProperty pc_compat_2_4[] = {
|
|
PC_CPU_MODEL_IDS("2.4.0")
|
|
{ "Haswell-" TYPE_X86_CPU, "abm", "off" },
|
|
{ "Haswell-noTSX-" TYPE_X86_CPU, "abm", "off" },
|
|
{ "Broadwell-" TYPE_X86_CPU, "abm", "off" },
|
|
{ "Broadwell-noTSX-" TYPE_X86_CPU, "abm", "off" },
|
|
{ "host" "-" TYPE_X86_CPU, "host-cache-info", "on" },
|
|
{ TYPE_X86_CPU, "check", "off" },
|
|
{ "qemu64" "-" TYPE_X86_CPU, "sse4a", "on" },
|
|
{ "qemu64" "-" TYPE_X86_CPU, "abm", "on" },
|
|
{ "qemu64" "-" TYPE_X86_CPU, "popcnt", "on" },
|
|
{ "qemu32" "-" TYPE_X86_CPU, "popcnt", "on" },
|
|
{ "Opteron_G2" "-" TYPE_X86_CPU, "rdtscp", "on" },
|
|
{ "Opteron_G3" "-" TYPE_X86_CPU, "rdtscp", "on" },
|
|
{ "Opteron_G4" "-" TYPE_X86_CPU, "rdtscp", "on" },
|
|
{ "Opteron_G5" "-" TYPE_X86_CPU, "rdtscp", "on", }
|
|
};
|
|
const size_t pc_compat_2_4_len = G_N_ELEMENTS(pc_compat_2_4);
|
|
|
|
GlobalProperty pc_compat_2_3[] = {
|
|
PC_CPU_MODEL_IDS("2.3.0")
|
|
{ TYPE_X86_CPU, "arat", "off" },
|
|
{ "qemu64" "-" TYPE_X86_CPU, "min-level", "4" },
|
|
{ "kvm64" "-" TYPE_X86_CPU, "min-level", "5" },
|
|
{ "pentium3" "-" TYPE_X86_CPU, "min-level", "2" },
|
|
{ "n270" "-" TYPE_X86_CPU, "min-level", "5" },
|
|
{ "Conroe" "-" TYPE_X86_CPU, "min-level", "4" },
|
|
{ "Penryn" "-" TYPE_X86_CPU, "min-level", "4" },
|
|
{ "Nehalem" "-" TYPE_X86_CPU, "min-level", "4" },
|
|
{ "n270" "-" TYPE_X86_CPU, "min-xlevel", "0x8000000a" },
|
|
{ "Penryn" "-" TYPE_X86_CPU, "min-xlevel", "0x8000000a" },
|
|
{ "Conroe" "-" TYPE_X86_CPU, "min-xlevel", "0x8000000a" },
|
|
{ "Nehalem" "-" TYPE_X86_CPU, "min-xlevel", "0x8000000a" },
|
|
{ "Westmere" "-" TYPE_X86_CPU, "min-xlevel", "0x8000000a" },
|
|
{ "SandyBridge" "-" TYPE_X86_CPU, "min-xlevel", "0x8000000a" },
|
|
{ "IvyBridge" "-" TYPE_X86_CPU, "min-xlevel", "0x8000000a" },
|
|
{ "Haswell" "-" TYPE_X86_CPU, "min-xlevel", "0x8000000a" },
|
|
{ "Haswell-noTSX" "-" TYPE_X86_CPU, "min-xlevel", "0x8000000a" },
|
|
{ "Broadwell" "-" TYPE_X86_CPU, "min-xlevel", "0x8000000a" },
|
|
{ "Broadwell-noTSX" "-" TYPE_X86_CPU, "min-xlevel", "0x8000000a" },
|
|
{ TYPE_X86_CPU, "kvm-no-smi-migration", "on" },
|
|
};
|
|
const size_t pc_compat_2_3_len = G_N_ELEMENTS(pc_compat_2_3);
|
|
|
|
GlobalProperty pc_compat_2_2[] = {
|
|
PC_CPU_MODEL_IDS("2.2.0")
|
|
{ "kvm64" "-" TYPE_X86_CPU, "vme", "off" },
|
|
{ "kvm32" "-" TYPE_X86_CPU, "vme", "off" },
|
|
{ "Conroe" "-" TYPE_X86_CPU, "vme", "off" },
|
|
{ "Penryn" "-" TYPE_X86_CPU, "vme", "off" },
|
|
{ "Nehalem" "-" TYPE_X86_CPU, "vme", "off" },
|
|
{ "Westmere" "-" TYPE_X86_CPU, "vme", "off" },
|
|
{ "SandyBridge" "-" TYPE_X86_CPU, "vme", "off" },
|
|
{ "Haswell" "-" TYPE_X86_CPU, "vme", "off" },
|
|
{ "Broadwell" "-" TYPE_X86_CPU, "vme", "off" },
|
|
{ "Opteron_G1" "-" TYPE_X86_CPU, "vme", "off" },
|
|
{ "Opteron_G2" "-" TYPE_X86_CPU, "vme", "off" },
|
|
{ "Opteron_G3" "-" TYPE_X86_CPU, "vme", "off" },
|
|
{ "Opteron_G4" "-" TYPE_X86_CPU, "vme", "off" },
|
|
{ "Opteron_G5" "-" TYPE_X86_CPU, "vme", "off" },
|
|
{ "Haswell" "-" TYPE_X86_CPU, "f16c", "off" },
|
|
{ "Haswell" "-" TYPE_X86_CPU, "rdrand", "off" },
|
|
{ "Broadwell" "-" TYPE_X86_CPU, "f16c", "off" },
|
|
{ "Broadwell" "-" TYPE_X86_CPU, "rdrand", "off" },
|
|
};
|
|
const size_t pc_compat_2_2_len = G_N_ELEMENTS(pc_compat_2_2);
|
|
|
|
GlobalProperty pc_compat_2_1[] = {
|
|
PC_CPU_MODEL_IDS("2.1.0")
|
|
{ "coreduo" "-" TYPE_X86_CPU, "vmx", "on" },
|
|
{ "core2duo" "-" TYPE_X86_CPU, "vmx", "on" },
|
|
};
|
|
const size_t pc_compat_2_1_len = G_N_ELEMENTS(pc_compat_2_1);
|
|
|
|
GlobalProperty pc_compat_2_0[] = {
|
|
PC_CPU_MODEL_IDS("2.0.0")
|
|
{ "virtio-scsi-pci", "any_layout", "off" },
|
|
{ "PIIX4_PM", "memory-hotplug-support", "off" },
|
|
{ "apic", "version", "0x11" },
|
|
{ "nec-usb-xhci", "superspeed-ports-first", "off" },
|
|
{ "nec-usb-xhci", "force-pcie-endcap", "on" },
|
|
{ "pci-serial", "prog_if", "0" },
|
|
{ "pci-serial-2x", "prog_if", "0" },
|
|
{ "pci-serial-4x", "prog_if", "0" },
|
|
{ "virtio-net-pci", "guest_announce", "off" },
|
|
{ "ICH9-LPC", "memory-hotplug-support", "off" },
|
|
{ "xio3130-downstream", COMPAT_PROP_PCP, "off" },
|
|
{ "ioh3420", COMPAT_PROP_PCP, "off" },
|
|
};
|
|
const size_t pc_compat_2_0_len = G_N_ELEMENTS(pc_compat_2_0);
|
|
|
|
GlobalProperty pc_compat_1_7[] = {
|
|
PC_CPU_MODEL_IDS("1.7.0")
|
|
{ TYPE_USB_DEVICE, "msos-desc", "no" },
|
|
{ "PIIX4_PM", "acpi-pci-hotplug-with-bridge-support", "off" },
|
|
{ "hpet", HPET_INTCAP, "4" },
|
|
};
|
|
const size_t pc_compat_1_7_len = G_N_ELEMENTS(pc_compat_1_7);
|
|
|
|
GlobalProperty pc_compat_1_6[] = {
|
|
PC_CPU_MODEL_IDS("1.6.0")
|
|
{ "e1000", "mitigation", "off" },
|
|
{ "qemu64-" TYPE_X86_CPU, "model", "2" },
|
|
{ "qemu32-" TYPE_X86_CPU, "model", "3" },
|
|
{ "i440FX-pcihost", "short_root_bus", "1" },
|
|
{ "q35-pcihost", "short_root_bus", "1" },
|
|
};
|
|
const size_t pc_compat_1_6_len = G_N_ELEMENTS(pc_compat_1_6);
|
|
|
|
GlobalProperty pc_compat_1_5[] = {
|
|
PC_CPU_MODEL_IDS("1.5.0")
|
|
{ "Conroe-" TYPE_X86_CPU, "model", "2" },
|
|
{ "Conroe-" TYPE_X86_CPU, "min-level", "2" },
|
|
{ "Penryn-" TYPE_X86_CPU, "model", "2" },
|
|
{ "Penryn-" TYPE_X86_CPU, "min-level", "2" },
|
|
{ "Nehalem-" TYPE_X86_CPU, "model", "2" },
|
|
{ "Nehalem-" TYPE_X86_CPU, "min-level", "2" },
|
|
{ "virtio-net-pci", "any_layout", "off" },
|
|
{ TYPE_X86_CPU, "pmu", "on" },
|
|
{ "i440FX-pcihost", "short_root_bus", "0" },
|
|
{ "q35-pcihost", "short_root_bus", "0" },
|
|
};
|
|
const size_t pc_compat_1_5_len = G_N_ELEMENTS(pc_compat_1_5);
|
|
|
|
GlobalProperty pc_compat_1_4[] = {
|
|
PC_CPU_MODEL_IDS("1.4.0")
|
|
{ "scsi-hd", "discard_granularity", "0" },
|
|
{ "scsi-cd", "discard_granularity", "0" },
|
|
{ "scsi-disk", "discard_granularity", "0" },
|
|
{ "ide-hd", "discard_granularity", "0" },
|
|
{ "ide-cd", "discard_granularity", "0" },
|
|
{ "ide-drive", "discard_granularity", "0" },
|
|
{ "virtio-blk-pci", "discard_granularity", "0" },
|
|
/* DEV_NVECTORS_UNSPECIFIED as a uint32_t string: */
|
|
{ "virtio-serial-pci", "vectors", "0xFFFFFFFF" },
|
|
{ "virtio-net-pci", "ctrl_guest_offloads", "off" },
|
|
{ "e1000", "romfile", "pxe-e1000.rom" },
|
|
{ "ne2k_pci", "romfile", "pxe-ne2k_pci.rom" },
|
|
{ "pcnet", "romfile", "pxe-pcnet.rom" },
|
|
{ "rtl8139", "romfile", "pxe-rtl8139.rom" },
|
|
{ "virtio-net-pci", "romfile", "pxe-virtio.rom" },
|
|
{ "486-" TYPE_X86_CPU, "model", "0" },
|
|
{ "n270" "-" TYPE_X86_CPU, "movbe", "off" },
|
|
{ "Westmere" "-" TYPE_X86_CPU, "pclmulqdq", "off" },
|
|
};
|
|
const size_t pc_compat_1_4_len = G_N_ELEMENTS(pc_compat_1_4);
|
|
|
|
GSIState *pc_gsi_create(qemu_irq **irqs, bool pci_enabled)
|
|
{
|
|
GSIState *s;
|
|
|
|
s = g_new0(GSIState, 1);
|
|
if (kvm_ioapic_in_kernel()) {
|
|
kvm_pc_setup_irq_routing(pci_enabled);
|
|
}
|
|
*irqs = qemu_allocate_irqs(gsi_handler, s, GSI_NUM_PINS);
|
|
|
|
return s;
|
|
}
|
|
|
|
static void ioport80_write(void *opaque, hwaddr addr, uint64_t data,
|
|
unsigned size)
|
|
{
|
|
}
|
|
|
|
static uint64_t ioport80_read(void *opaque, hwaddr addr, unsigned size)
|
|
{
|
|
return 0xffffffffffffffffULL;
|
|
}
|
|
|
|
/* MSDOS compatibility mode FPU exception support */
|
|
static void ioportF0_write(void *opaque, hwaddr addr, uint64_t data,
|
|
unsigned size)
|
|
{
|
|
if (tcg_enabled()) {
|
|
cpu_set_ignne();
|
|
}
|
|
}
|
|
|
|
static uint64_t ioportF0_read(void *opaque, hwaddr addr, unsigned size)
|
|
{
|
|
return 0xffffffffffffffffULL;
|
|
}
|
|
|
|
/* PC cmos mappings */
|
|
|
|
#define REG_EQUIPMENT_BYTE 0x14
|
|
|
|
static void cmos_init_hd(ISADevice *s, int type_ofs, int info_ofs,
|
|
int16_t cylinders, int8_t heads, int8_t sectors)
|
|
{
|
|
rtc_set_memory(s, type_ofs, 47);
|
|
rtc_set_memory(s, info_ofs, cylinders);
|
|
rtc_set_memory(s, info_ofs + 1, cylinders >> 8);
|
|
rtc_set_memory(s, info_ofs + 2, heads);
|
|
rtc_set_memory(s, info_ofs + 3, 0xff);
|
|
rtc_set_memory(s, info_ofs + 4, 0xff);
|
|
rtc_set_memory(s, info_ofs + 5, 0xc0 | ((heads > 8) << 3));
|
|
rtc_set_memory(s, info_ofs + 6, cylinders);
|
|
rtc_set_memory(s, info_ofs + 7, cylinders >> 8);
|
|
rtc_set_memory(s, info_ofs + 8, sectors);
|
|
}
|
|
|
|
/* convert boot_device letter to something recognizable by the bios */
|
|
static int boot_device2nibble(char boot_device)
|
|
{
|
|
switch(boot_device) {
|
|
case 'a':
|
|
case 'b':
|
|
return 0x01; /* floppy boot */
|
|
case 'c':
|
|
return 0x02; /* hard drive boot */
|
|
case 'd':
|
|
return 0x03; /* CD-ROM boot */
|
|
case 'n':
|
|
return 0x04; /* Network boot */
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static void set_boot_dev(ISADevice *s, const char *boot_device, Error **errp)
|
|
{
|
|
#define PC_MAX_BOOT_DEVICES 3
|
|
int nbds, bds[3] = { 0, };
|
|
int i;
|
|
|
|
nbds = strlen(boot_device);
|
|
if (nbds > PC_MAX_BOOT_DEVICES) {
|
|
error_setg(errp, "Too many boot devices for PC");
|
|
return;
|
|
}
|
|
for (i = 0; i < nbds; i++) {
|
|
bds[i] = boot_device2nibble(boot_device[i]);
|
|
if (bds[i] == 0) {
|
|
error_setg(errp, "Invalid boot device for PC: '%c'",
|
|
boot_device[i]);
|
|
return;
|
|
}
|
|
}
|
|
rtc_set_memory(s, 0x3d, (bds[1] << 4) | bds[0]);
|
|
rtc_set_memory(s, 0x38, (bds[2] << 4) | (fd_bootchk ? 0x0 : 0x1));
|
|
}
|
|
|
|
static void pc_boot_set(void *opaque, const char *boot_device, Error **errp)
|
|
{
|
|
set_boot_dev(opaque, boot_device, errp);
|
|
}
|
|
|
|
static void pc_cmos_init_floppy(ISADevice *rtc_state, ISADevice *floppy)
|
|
{
|
|
int val, nb, i;
|
|
FloppyDriveType fd_type[2] = { FLOPPY_DRIVE_TYPE_NONE,
|
|
FLOPPY_DRIVE_TYPE_NONE };
|
|
|
|
/* floppy type */
|
|
if (floppy) {
|
|
for (i = 0; i < 2; i++) {
|
|
fd_type[i] = isa_fdc_get_drive_type(floppy, i);
|
|
}
|
|
}
|
|
val = (cmos_get_fd_drive_type(fd_type[0]) << 4) |
|
|
cmos_get_fd_drive_type(fd_type[1]);
|
|
rtc_set_memory(rtc_state, 0x10, val);
|
|
|
|
val = rtc_get_memory(rtc_state, REG_EQUIPMENT_BYTE);
|
|
nb = 0;
|
|
if (fd_type[0] != FLOPPY_DRIVE_TYPE_NONE) {
|
|
nb++;
|
|
}
|
|
if (fd_type[1] != FLOPPY_DRIVE_TYPE_NONE) {
|
|
nb++;
|
|
}
|
|
switch (nb) {
|
|
case 0:
|
|
break;
|
|
case 1:
|
|
val |= 0x01; /* 1 drive, ready for boot */
|
|
break;
|
|
case 2:
|
|
val |= 0x41; /* 2 drives, ready for boot */
|
|
break;
|
|
}
|
|
rtc_set_memory(rtc_state, REG_EQUIPMENT_BYTE, val);
|
|
}
|
|
|
|
typedef struct pc_cmos_init_late_arg {
|
|
ISADevice *rtc_state;
|
|
BusState *idebus[2];
|
|
} pc_cmos_init_late_arg;
|
|
|
|
typedef struct check_fdc_state {
|
|
ISADevice *floppy;
|
|
bool multiple;
|
|
} CheckFdcState;
|
|
|
|
static int check_fdc(Object *obj, void *opaque)
|
|
{
|
|
CheckFdcState *state = opaque;
|
|
Object *fdc;
|
|
uint32_t iobase;
|
|
Error *local_err = NULL;
|
|
|
|
fdc = object_dynamic_cast(obj, TYPE_ISA_FDC);
|
|
if (!fdc) {
|
|
return 0;
|
|
}
|
|
|
|
iobase = object_property_get_uint(obj, "iobase", &local_err);
|
|
if (local_err || iobase != 0x3f0) {
|
|
error_free(local_err);
|
|
return 0;
|
|
}
|
|
|
|
if (state->floppy) {
|
|
state->multiple = true;
|
|
} else {
|
|
state->floppy = ISA_DEVICE(obj);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static const char * const fdc_container_path[] = {
|
|
"/unattached", "/peripheral", "/peripheral-anon"
|
|
};
|
|
|
|
/*
|
|
* Locate the FDC at IO address 0x3f0, in order to configure the CMOS registers
|
|
* and ACPI objects.
|
|
*/
|
|
ISADevice *pc_find_fdc0(void)
|
|
{
|
|
int i;
|
|
Object *container;
|
|
CheckFdcState state = { 0 };
|
|
|
|
for (i = 0; i < ARRAY_SIZE(fdc_container_path); i++) {
|
|
container = container_get(qdev_get_machine(), fdc_container_path[i]);
|
|
object_child_foreach(container, check_fdc, &state);
|
|
}
|
|
|
|
if (state.multiple) {
|
|
warn_report("multiple floppy disk controllers with "
|
|
"iobase=0x3f0 have been found");
|
|
error_printf("the one being picked for CMOS setup might not reflect "
|
|
"your intent");
|
|
}
|
|
|
|
return state.floppy;
|
|
}
|
|
|
|
static void pc_cmos_init_late(void *opaque)
|
|
{
|
|
pc_cmos_init_late_arg *arg = opaque;
|
|
ISADevice *s = arg->rtc_state;
|
|
int16_t cylinders;
|
|
int8_t heads, sectors;
|
|
int val;
|
|
int i, trans;
|
|
|
|
val = 0;
|
|
if (arg->idebus[0] && ide_get_geometry(arg->idebus[0], 0,
|
|
&cylinders, &heads, §ors) >= 0) {
|
|
cmos_init_hd(s, 0x19, 0x1b, cylinders, heads, sectors);
|
|
val |= 0xf0;
|
|
}
|
|
if (arg->idebus[0] && ide_get_geometry(arg->idebus[0], 1,
|
|
&cylinders, &heads, §ors) >= 0) {
|
|
cmos_init_hd(s, 0x1a, 0x24, cylinders, heads, sectors);
|
|
val |= 0x0f;
|
|
}
|
|
rtc_set_memory(s, 0x12, val);
|
|
|
|
val = 0;
|
|
for (i = 0; i < 4; i++) {
|
|
/* NOTE: ide_get_geometry() returns the physical
|
|
geometry. It is always such that: 1 <= sects <= 63, 1
|
|
<= heads <= 16, 1 <= cylinders <= 16383. The BIOS
|
|
geometry can be different if a translation is done. */
|
|
if (arg->idebus[i / 2] &&
|
|
ide_get_geometry(arg->idebus[i / 2], i % 2,
|
|
&cylinders, &heads, §ors) >= 0) {
|
|
trans = ide_get_bios_chs_trans(arg->idebus[i / 2], i % 2) - 1;
|
|
assert((trans & ~3) == 0);
|
|
val |= trans << (i * 2);
|
|
}
|
|
}
|
|
rtc_set_memory(s, 0x39, val);
|
|
|
|
pc_cmos_init_floppy(s, pc_find_fdc0());
|
|
|
|
qemu_unregister_reset(pc_cmos_init_late, opaque);
|
|
}
|
|
|
|
void pc_cmos_init(PCMachineState *pcms,
|
|
BusState *idebus0, BusState *idebus1,
|
|
ISADevice *s)
|
|
{
|
|
int val;
|
|
static pc_cmos_init_late_arg arg;
|
|
X86MachineState *x86ms = X86_MACHINE(pcms);
|
|
|
|
/* various important CMOS locations needed by PC/Bochs bios */
|
|
|
|
/* memory size */
|
|
/* base memory (first MiB) */
|
|
val = MIN(x86ms->below_4g_mem_size / KiB, 640);
|
|
rtc_set_memory(s, 0x15, val);
|
|
rtc_set_memory(s, 0x16, val >> 8);
|
|
/* extended memory (next 64MiB) */
|
|
if (x86ms->below_4g_mem_size > 1 * MiB) {
|
|
val = (x86ms->below_4g_mem_size - 1 * MiB) / KiB;
|
|
} else {
|
|
val = 0;
|
|
}
|
|
if (val > 65535)
|
|
val = 65535;
|
|
rtc_set_memory(s, 0x17, val);
|
|
rtc_set_memory(s, 0x18, val >> 8);
|
|
rtc_set_memory(s, 0x30, val);
|
|
rtc_set_memory(s, 0x31, val >> 8);
|
|
/* memory between 16MiB and 4GiB */
|
|
if (x86ms->below_4g_mem_size > 16 * MiB) {
|
|
val = (x86ms->below_4g_mem_size - 16 * MiB) / (64 * KiB);
|
|
} else {
|
|
val = 0;
|
|
}
|
|
if (val > 65535)
|
|
val = 65535;
|
|
rtc_set_memory(s, 0x34, val);
|
|
rtc_set_memory(s, 0x35, val >> 8);
|
|
/* memory above 4GiB */
|
|
val = x86ms->above_4g_mem_size / 65536;
|
|
rtc_set_memory(s, 0x5b, val);
|
|
rtc_set_memory(s, 0x5c, val >> 8);
|
|
rtc_set_memory(s, 0x5d, val >> 16);
|
|
|
|
object_property_add_link(OBJECT(pcms), "rtc_state",
|
|
TYPE_ISA_DEVICE,
|
|
(Object **)&x86ms->rtc,
|
|
object_property_allow_set_link,
|
|
OBJ_PROP_LINK_STRONG);
|
|
object_property_set_link(OBJECT(pcms), "rtc_state", OBJECT(s),
|
|
&error_abort);
|
|
|
|
set_boot_dev(s, MACHINE(pcms)->boot_order, &error_fatal);
|
|
|
|
val = 0;
|
|
val |= 0x02; /* FPU is there */
|
|
val |= 0x04; /* PS/2 mouse installed */
|
|
rtc_set_memory(s, REG_EQUIPMENT_BYTE, val);
|
|
|
|
/* hard drives and FDC */
|
|
arg.rtc_state = s;
|
|
arg.idebus[0] = idebus0;
|
|
arg.idebus[1] = idebus1;
|
|
qemu_register_reset(pc_cmos_init_late, &arg);
|
|
}
|
|
|
|
static void handle_a20_line_change(void *opaque, int irq, int level)
|
|
{
|
|
X86CPU *cpu = opaque;
|
|
|
|
/* XXX: send to all CPUs ? */
|
|
/* XXX: add logic to handle multiple A20 line sources */
|
|
x86_cpu_set_a20(cpu, level);
|
|
}
|
|
|
|
#define NE2000_NB_MAX 6
|
|
|
|
static const int ne2000_io[NE2000_NB_MAX] = { 0x300, 0x320, 0x340, 0x360,
|
|
0x280, 0x380 };
|
|
static const int ne2000_irq[NE2000_NB_MAX] = { 9, 10, 11, 3, 4, 5 };
|
|
|
|
void pc_init_ne2k_isa(ISABus *bus, NICInfo *nd)
|
|
{
|
|
static int nb_ne2k = 0;
|
|
|
|
if (nb_ne2k == NE2000_NB_MAX)
|
|
return;
|
|
isa_ne2000_init(bus, ne2000_io[nb_ne2k],
|
|
ne2000_irq[nb_ne2k], nd);
|
|
nb_ne2k++;
|
|
}
|
|
|
|
void pc_acpi_smi_interrupt(void *opaque, int irq, int level)
|
|
{
|
|
X86CPU *cpu = opaque;
|
|
|
|
if (level) {
|
|
cpu_interrupt(CPU(cpu), CPU_INTERRUPT_SMI);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* This function is very similar to smp_parse()
|
|
* in hw/core/machine.c but includes CPU die support.
|
|
*/
|
|
void pc_smp_parse(MachineState *ms, QemuOpts *opts)
|
|
{
|
|
X86MachineState *x86ms = X86_MACHINE(ms);
|
|
|
|
if (opts) {
|
|
unsigned cpus = qemu_opt_get_number(opts, "cpus", 0);
|
|
unsigned sockets = qemu_opt_get_number(opts, "sockets", 0);
|
|
unsigned dies = qemu_opt_get_number(opts, "dies", 1);
|
|
unsigned cores = qemu_opt_get_number(opts, "cores", 0);
|
|
unsigned threads = qemu_opt_get_number(opts, "threads", 0);
|
|
|
|
/* compute missing values, prefer sockets over cores over threads */
|
|
if (cpus == 0 || sockets == 0) {
|
|
cores = cores > 0 ? cores : 1;
|
|
threads = threads > 0 ? threads : 1;
|
|
if (cpus == 0) {
|
|
sockets = sockets > 0 ? sockets : 1;
|
|
cpus = cores * threads * dies * sockets;
|
|
} else {
|
|
ms->smp.max_cpus =
|
|
qemu_opt_get_number(opts, "maxcpus", cpus);
|
|
sockets = ms->smp.max_cpus / (cores * threads * dies);
|
|
}
|
|
} else if (cores == 0) {
|
|
threads = threads > 0 ? threads : 1;
|
|
cores = cpus / (sockets * dies * threads);
|
|
cores = cores > 0 ? cores : 1;
|
|
} else if (threads == 0) {
|
|
threads = cpus / (cores * dies * sockets);
|
|
threads = threads > 0 ? threads : 1;
|
|
} else if (sockets * dies * cores * threads < cpus) {
|
|
error_report("cpu topology: "
|
|
"sockets (%u) * dies (%u) * cores (%u) * threads (%u) < "
|
|
"smp_cpus (%u)",
|
|
sockets, dies, cores, threads, cpus);
|
|
exit(1);
|
|
}
|
|
|
|
ms->smp.max_cpus =
|
|
qemu_opt_get_number(opts, "maxcpus", cpus);
|
|
|
|
if (ms->smp.max_cpus < cpus) {
|
|
error_report("maxcpus must be equal to or greater than smp");
|
|
exit(1);
|
|
}
|
|
|
|
if (sockets * dies * cores * threads != ms->smp.max_cpus) {
|
|
error_report("Invalid CPU topology deprecated: "
|
|
"sockets (%u) * dies (%u) * cores (%u) * threads (%u) "
|
|
"!= maxcpus (%u)",
|
|
sockets, dies, cores, threads,
|
|
ms->smp.max_cpus);
|
|
exit(1);
|
|
}
|
|
|
|
ms->smp.cpus = cpus;
|
|
ms->smp.cores = cores;
|
|
ms->smp.threads = threads;
|
|
ms->smp.sockets = sockets;
|
|
x86ms->smp_dies = dies;
|
|
}
|
|
|
|
if (ms->smp.cpus > 1) {
|
|
Error *blocker = NULL;
|
|
error_setg(&blocker, QERR_REPLAY_NOT_SUPPORTED, "smp");
|
|
replay_add_blocker(blocker);
|
|
}
|
|
}
|
|
|
|
static
|
|
void pc_machine_done(Notifier *notifier, void *data)
|
|
{
|
|
PCMachineState *pcms = container_of(notifier,
|
|
PCMachineState, machine_done);
|
|
X86MachineState *x86ms = X86_MACHINE(pcms);
|
|
|
|
/* set the number of CPUs */
|
|
x86_rtc_set_cpus_count(x86ms->rtc, x86ms->boot_cpus);
|
|
|
|
fw_cfg_add_extra_pci_roots(pcms->bus, x86ms->fw_cfg);
|
|
|
|
acpi_setup();
|
|
if (x86ms->fw_cfg) {
|
|
fw_cfg_build_smbios(MACHINE(pcms), x86ms->fw_cfg);
|
|
fw_cfg_build_feature_control(MACHINE(pcms), x86ms->fw_cfg);
|
|
/* update FW_CFG_NB_CPUS to account for -device added CPUs */
|
|
fw_cfg_modify_i16(x86ms->fw_cfg, FW_CFG_NB_CPUS, x86ms->boot_cpus);
|
|
}
|
|
|
|
|
|
if (x86ms->apic_id_limit > 255 && !xen_enabled() &&
|
|
!kvm_irqchip_in_kernel()) {
|
|
error_report("current -smp configuration requires kernel "
|
|
"irqchip support.");
|
|
exit(EXIT_FAILURE);
|
|
}
|
|
}
|
|
|
|
void pc_guest_info_init(PCMachineState *pcms)
|
|
{
|
|
int i;
|
|
MachineState *ms = MACHINE(pcms);
|
|
X86MachineState *x86ms = X86_MACHINE(pcms);
|
|
|
|
x86ms->apic_xrupt_override = true;
|
|
pcms->numa_nodes = ms->numa_state->num_nodes;
|
|
pcms->node_mem = g_malloc0(pcms->numa_nodes *
|
|
sizeof *pcms->node_mem);
|
|
for (i = 0; i < ms->numa_state->num_nodes; i++) {
|
|
pcms->node_mem[i] = ms->numa_state->nodes[i].node_mem;
|
|
}
|
|
|
|
pcms->machine_done.notify = pc_machine_done;
|
|
qemu_add_machine_init_done_notifier(&pcms->machine_done);
|
|
}
|
|
|
|
/* setup pci memory address space mapping into system address space */
|
|
void pc_pci_as_mapping_init(Object *owner, MemoryRegion *system_memory,
|
|
MemoryRegion *pci_address_space)
|
|
{
|
|
/* Set to lower priority than RAM */
|
|
memory_region_add_subregion_overlap(system_memory, 0x0,
|
|
pci_address_space, -1);
|
|
}
|
|
|
|
void xen_load_linux(PCMachineState *pcms)
|
|
{
|
|
int i;
|
|
FWCfgState *fw_cfg;
|
|
PCMachineClass *pcmc = PC_MACHINE_GET_CLASS(pcms);
|
|
X86MachineState *x86ms = X86_MACHINE(pcms);
|
|
|
|
assert(MACHINE(pcms)->kernel_filename != NULL);
|
|
|
|
fw_cfg = fw_cfg_init_io(FW_CFG_IO_BASE);
|
|
fw_cfg_add_i16(fw_cfg, FW_CFG_NB_CPUS, x86ms->boot_cpus);
|
|
rom_set_fw(fw_cfg);
|
|
|
|
x86_load_linux(x86ms, fw_cfg, pcmc->acpi_data_size,
|
|
pcmc->pvh_enabled, pcmc->linuxboot_dma_enabled);
|
|
for (i = 0; i < nb_option_roms; i++) {
|
|
assert(!strcmp(option_rom[i].name, "linuxboot.bin") ||
|
|
!strcmp(option_rom[i].name, "linuxboot_dma.bin") ||
|
|
!strcmp(option_rom[i].name, "pvh.bin") ||
|
|
!strcmp(option_rom[i].name, "multiboot.bin"));
|
|
rom_add_option(option_rom[i].name, option_rom[i].bootindex);
|
|
}
|
|
x86ms->fw_cfg = fw_cfg;
|
|
}
|
|
|
|
void pc_memory_init(PCMachineState *pcms,
|
|
MemoryRegion *system_memory,
|
|
MemoryRegion *rom_memory,
|
|
MemoryRegion **ram_memory)
|
|
{
|
|
int linux_boot, i;
|
|
MemoryRegion *option_rom_mr;
|
|
MemoryRegion *ram_below_4g, *ram_above_4g;
|
|
FWCfgState *fw_cfg;
|
|
MachineState *machine = MACHINE(pcms);
|
|
MachineClass *mc = MACHINE_GET_CLASS(machine);
|
|
PCMachineClass *pcmc = PC_MACHINE_GET_CLASS(pcms);
|
|
X86MachineState *x86ms = X86_MACHINE(pcms);
|
|
|
|
assert(machine->ram_size == x86ms->below_4g_mem_size +
|
|
x86ms->above_4g_mem_size);
|
|
|
|
linux_boot = (machine->kernel_filename != NULL);
|
|
|
|
/*
|
|
* Split single memory region and use aliases to address portions of it,
|
|
* done for backwards compatibility with older qemus.
|
|
*/
|
|
*ram_memory = machine->ram;
|
|
ram_below_4g = g_malloc(sizeof(*ram_below_4g));
|
|
memory_region_init_alias(ram_below_4g, NULL, "ram-below-4g", machine->ram,
|
|
0, x86ms->below_4g_mem_size);
|
|
memory_region_add_subregion(system_memory, 0, ram_below_4g);
|
|
e820_add_entry(0, x86ms->below_4g_mem_size, E820_RAM);
|
|
if (x86ms->above_4g_mem_size > 0) {
|
|
ram_above_4g = g_malloc(sizeof(*ram_above_4g));
|
|
memory_region_init_alias(ram_above_4g, NULL, "ram-above-4g",
|
|
machine->ram,
|
|
x86ms->below_4g_mem_size,
|
|
x86ms->above_4g_mem_size);
|
|
memory_region_add_subregion(system_memory, 0x100000000ULL,
|
|
ram_above_4g);
|
|
e820_add_entry(0x100000000ULL, x86ms->above_4g_mem_size, E820_RAM);
|
|
}
|
|
|
|
if (!pcmc->has_reserved_memory &&
|
|
(machine->ram_slots ||
|
|
(machine->maxram_size > machine->ram_size))) {
|
|
|
|
error_report("\"-memory 'slots|maxmem'\" is not supported by: %s",
|
|
mc->name);
|
|
exit(EXIT_FAILURE);
|
|
}
|
|
|
|
/* always allocate the device memory information */
|
|
machine->device_memory = g_malloc0(sizeof(*machine->device_memory));
|
|
|
|
/* initialize device memory address space */
|
|
if (pcmc->has_reserved_memory &&
|
|
(machine->ram_size < machine->maxram_size)) {
|
|
ram_addr_t device_mem_size = machine->maxram_size - machine->ram_size;
|
|
|
|
if (machine->ram_slots > ACPI_MAX_RAM_SLOTS) {
|
|
error_report("unsupported amount of memory slots: %"PRIu64,
|
|
machine->ram_slots);
|
|
exit(EXIT_FAILURE);
|
|
}
|
|
|
|
if (QEMU_ALIGN_UP(machine->maxram_size,
|
|
TARGET_PAGE_SIZE) != machine->maxram_size) {
|
|
error_report("maximum memory size must by aligned to multiple of "
|
|
"%d bytes", TARGET_PAGE_SIZE);
|
|
exit(EXIT_FAILURE);
|
|
}
|
|
|
|
machine->device_memory->base =
|
|
ROUND_UP(0x100000000ULL + x86ms->above_4g_mem_size, 1 * GiB);
|
|
|
|
if (pcmc->enforce_aligned_dimm) {
|
|
/* size device region assuming 1G page max alignment per slot */
|
|
device_mem_size += (1 * GiB) * machine->ram_slots;
|
|
}
|
|
|
|
if ((machine->device_memory->base + device_mem_size) <
|
|
device_mem_size) {
|
|
error_report("unsupported amount of maximum memory: " RAM_ADDR_FMT,
|
|
machine->maxram_size);
|
|
exit(EXIT_FAILURE);
|
|
}
|
|
|
|
memory_region_init(&machine->device_memory->mr, OBJECT(pcms),
|
|
"device-memory", device_mem_size);
|
|
memory_region_add_subregion(system_memory, machine->device_memory->base,
|
|
&machine->device_memory->mr);
|
|
}
|
|
|
|
/* Initialize PC system firmware */
|
|
pc_system_firmware_init(pcms, rom_memory);
|
|
|
|
option_rom_mr = g_malloc(sizeof(*option_rom_mr));
|
|
memory_region_init_ram(option_rom_mr, NULL, "pc.rom", PC_ROM_SIZE,
|
|
&error_fatal);
|
|
if (pcmc->pci_enabled) {
|
|
memory_region_set_readonly(option_rom_mr, true);
|
|
}
|
|
memory_region_add_subregion_overlap(rom_memory,
|
|
PC_ROM_MIN_VGA,
|
|
option_rom_mr,
|
|
1);
|
|
|
|
fw_cfg = fw_cfg_arch_create(machine,
|
|
x86ms->boot_cpus, x86ms->apic_id_limit);
|
|
|
|
rom_set_fw(fw_cfg);
|
|
|
|
if (pcmc->has_reserved_memory && machine->device_memory->base) {
|
|
uint64_t *val = g_malloc(sizeof(*val));
|
|
PCMachineClass *pcmc = PC_MACHINE_GET_CLASS(pcms);
|
|
uint64_t res_mem_end = machine->device_memory->base;
|
|
|
|
if (!pcmc->broken_reserved_end) {
|
|
res_mem_end += memory_region_size(&machine->device_memory->mr);
|
|
}
|
|
*val = cpu_to_le64(ROUND_UP(res_mem_end, 1 * GiB));
|
|
fw_cfg_add_file(fw_cfg, "etc/reserved-memory-end", val, sizeof(*val));
|
|
}
|
|
|
|
if (linux_boot) {
|
|
x86_load_linux(x86ms, fw_cfg, pcmc->acpi_data_size,
|
|
pcmc->pvh_enabled, pcmc->linuxboot_dma_enabled);
|
|
}
|
|
|
|
for (i = 0; i < nb_option_roms; i++) {
|
|
rom_add_option(option_rom[i].name, option_rom[i].bootindex);
|
|
}
|
|
x86ms->fw_cfg = fw_cfg;
|
|
|
|
/* Init default IOAPIC address space */
|
|
x86ms->ioapic_as = &address_space_memory;
|
|
|
|
/* Init ACPI memory hotplug IO base address */
|
|
pcms->memhp_io_base = ACPI_MEMORY_HOTPLUG_BASE;
|
|
}
|
|
|
|
/*
|
|
* The 64bit pci hole starts after "above 4G RAM" and
|
|
* potentially the space reserved for memory hotplug.
|
|
*/
|
|
uint64_t pc_pci_hole64_start(void)
|
|
{
|
|
PCMachineState *pcms = PC_MACHINE(qdev_get_machine());
|
|
PCMachineClass *pcmc = PC_MACHINE_GET_CLASS(pcms);
|
|
MachineState *ms = MACHINE(pcms);
|
|
X86MachineState *x86ms = X86_MACHINE(pcms);
|
|
uint64_t hole64_start = 0;
|
|
|
|
if (pcmc->has_reserved_memory && ms->device_memory->base) {
|
|
hole64_start = ms->device_memory->base;
|
|
if (!pcmc->broken_reserved_end) {
|
|
hole64_start += memory_region_size(&ms->device_memory->mr);
|
|
}
|
|
} else {
|
|
hole64_start = 0x100000000ULL + x86ms->above_4g_mem_size;
|
|
}
|
|
|
|
return ROUND_UP(hole64_start, 1 * GiB);
|
|
}
|
|
|
|
DeviceState *pc_vga_init(ISABus *isa_bus, PCIBus *pci_bus)
|
|
{
|
|
DeviceState *dev = NULL;
|
|
|
|
rom_set_order_override(FW_CFG_ORDER_OVERRIDE_VGA);
|
|
if (pci_bus) {
|
|
PCIDevice *pcidev = pci_vga_init(pci_bus);
|
|
dev = pcidev ? &pcidev->qdev : NULL;
|
|
} else if (isa_bus) {
|
|
ISADevice *isadev = isa_vga_init(isa_bus);
|
|
dev = isadev ? DEVICE(isadev) : NULL;
|
|
}
|
|
rom_reset_order_override();
|
|
return dev;
|
|
}
|
|
|
|
static const MemoryRegionOps ioport80_io_ops = {
|
|
.write = ioport80_write,
|
|
.read = ioport80_read,
|
|
.endianness = DEVICE_NATIVE_ENDIAN,
|
|
.impl = {
|
|
.min_access_size = 1,
|
|
.max_access_size = 1,
|
|
},
|
|
};
|
|
|
|
static const MemoryRegionOps ioportF0_io_ops = {
|
|
.write = ioportF0_write,
|
|
.read = ioportF0_read,
|
|
.endianness = DEVICE_NATIVE_ENDIAN,
|
|
.impl = {
|
|
.min_access_size = 1,
|
|
.max_access_size = 1,
|
|
},
|
|
};
|
|
|
|
static void pc_superio_init(ISABus *isa_bus, bool create_fdctrl, bool no_vmport)
|
|
{
|
|
int i;
|
|
DriveInfo *fd[MAX_FD];
|
|
qemu_irq *a20_line;
|
|
ISADevice *fdc, *i8042, *port92, *vmmouse;
|
|
|
|
serial_hds_isa_init(isa_bus, 0, MAX_ISA_SERIAL_PORTS);
|
|
parallel_hds_isa_init(isa_bus, MAX_PARALLEL_PORTS);
|
|
|
|
for (i = 0; i < MAX_FD; i++) {
|
|
fd[i] = drive_get(IF_FLOPPY, 0, i);
|
|
create_fdctrl |= !!fd[i];
|
|
}
|
|
if (create_fdctrl) {
|
|
fdc = isa_new(TYPE_ISA_FDC);
|
|
if (fdc) {
|
|
isa_realize_and_unref(fdc, isa_bus, &error_fatal);
|
|
isa_fdc_init_drives(fdc, fd);
|
|
}
|
|
}
|
|
|
|
i8042 = isa_create_simple(isa_bus, "i8042");
|
|
if (!no_vmport) {
|
|
isa_create_simple(isa_bus, TYPE_VMPORT);
|
|
vmmouse = isa_try_new("vmmouse");
|
|
} else {
|
|
vmmouse = NULL;
|
|
}
|
|
if (vmmouse) {
|
|
object_property_set_link(OBJECT(vmmouse), "i8042", OBJECT(i8042),
|
|
&error_abort);
|
|
isa_realize_and_unref(vmmouse, isa_bus, &error_fatal);
|
|
}
|
|
port92 = isa_create_simple(isa_bus, TYPE_PORT92);
|
|
|
|
a20_line = qemu_allocate_irqs(handle_a20_line_change, first_cpu, 2);
|
|
i8042_setup_a20_line(i8042, a20_line[0]);
|
|
qdev_connect_gpio_out_named(DEVICE(port92),
|
|
PORT92_A20_LINE, 0, a20_line[1]);
|
|
g_free(a20_line);
|
|
}
|
|
|
|
void pc_basic_device_init(struct PCMachineState *pcms,
|
|
ISABus *isa_bus, qemu_irq *gsi,
|
|
ISADevice **rtc_state,
|
|
bool create_fdctrl,
|
|
uint32_t hpet_irqs)
|
|
{
|
|
int i;
|
|
DeviceState *hpet = NULL;
|
|
int pit_isa_irq = 0;
|
|
qemu_irq pit_alt_irq = NULL;
|
|
qemu_irq rtc_irq = NULL;
|
|
ISADevice *pit = NULL;
|
|
MemoryRegion *ioport80_io = g_new(MemoryRegion, 1);
|
|
MemoryRegion *ioportF0_io = g_new(MemoryRegion, 1);
|
|
|
|
memory_region_init_io(ioport80_io, NULL, &ioport80_io_ops, NULL, "ioport80", 1);
|
|
memory_region_add_subregion(isa_bus->address_space_io, 0x80, ioport80_io);
|
|
|
|
memory_region_init_io(ioportF0_io, NULL, &ioportF0_io_ops, NULL, "ioportF0", 1);
|
|
memory_region_add_subregion(isa_bus->address_space_io, 0xf0, ioportF0_io);
|
|
|
|
/*
|
|
* Check if an HPET shall be created.
|
|
*
|
|
* Without KVM_CAP_PIT_STATE2, we cannot switch off the in-kernel PIT
|
|
* when the HPET wants to take over. Thus we have to disable the latter.
|
|
*/
|
|
if (pcms->hpet_enabled && (!kvm_irqchip_in_kernel() ||
|
|
kvm_has_pit_state2())) {
|
|
hpet = qdev_try_new(TYPE_HPET);
|
|
if (!hpet) {
|
|
error_report("couldn't create HPET device");
|
|
exit(1);
|
|
}
|
|
/*
|
|
* For pc-piix-*, hpet's intcap is always IRQ2. For pc-q35-1.7 and
|
|
* earlier, use IRQ2 for compat. Otherwise, use IRQ16~23, IRQ8 and
|
|
* IRQ2.
|
|
*/
|
|
uint8_t compat = object_property_get_uint(OBJECT(hpet),
|
|
HPET_INTCAP, NULL);
|
|
if (!compat) {
|
|
qdev_prop_set_uint32(hpet, HPET_INTCAP, hpet_irqs);
|
|
}
|
|
sysbus_realize_and_unref(SYS_BUS_DEVICE(hpet), &error_fatal);
|
|
sysbus_mmio_map(SYS_BUS_DEVICE(hpet), 0, HPET_BASE);
|
|
|
|
for (i = 0; i < GSI_NUM_PINS; i++) {
|
|
sysbus_connect_irq(SYS_BUS_DEVICE(hpet), i, gsi[i]);
|
|
}
|
|
pit_isa_irq = -1;
|
|
pit_alt_irq = qdev_get_gpio_in(hpet, HPET_LEGACY_PIT_INT);
|
|
rtc_irq = qdev_get_gpio_in(hpet, HPET_LEGACY_RTC_INT);
|
|
}
|
|
*rtc_state = mc146818_rtc_init(isa_bus, 2000, rtc_irq);
|
|
|
|
qemu_register_boot_set(pc_boot_set, *rtc_state);
|
|
|
|
if (!xen_enabled() && pcms->pit_enabled) {
|
|
if (kvm_pit_in_kernel()) {
|
|
pit = kvm_pit_init(isa_bus, 0x40);
|
|
} else {
|
|
pit = i8254_pit_init(isa_bus, 0x40, pit_isa_irq, pit_alt_irq);
|
|
}
|
|
if (hpet) {
|
|
/* connect PIT to output control line of the HPET */
|
|
qdev_connect_gpio_out(hpet, 0, qdev_get_gpio_in(DEVICE(pit), 0));
|
|
}
|
|
pcspk_init(pcms->pcspk, isa_bus, pit);
|
|
}
|
|
|
|
i8257_dma_init(isa_bus, 0);
|
|
|
|
/* Super I/O */
|
|
pc_superio_init(isa_bus, create_fdctrl, pcms->vmport != ON_OFF_AUTO_ON);
|
|
}
|
|
|
|
void pc_nic_init(PCMachineClass *pcmc, ISABus *isa_bus, PCIBus *pci_bus)
|
|
{
|
|
int i;
|
|
|
|
rom_set_order_override(FW_CFG_ORDER_OVERRIDE_NIC);
|
|
for (i = 0; i < nb_nics; i++) {
|
|
NICInfo *nd = &nd_table[i];
|
|
const char *model = nd->model ? nd->model : pcmc->default_nic_model;
|
|
|
|
if (g_str_equal(model, "ne2k_isa")) {
|
|
pc_init_ne2k_isa(isa_bus, nd);
|
|
} else {
|
|
pci_nic_init_nofail(nd, pci_bus, model, NULL);
|
|
}
|
|
}
|
|
rom_reset_order_override();
|
|
}
|
|
|
|
void pc_i8259_create(ISABus *isa_bus, qemu_irq *i8259_irqs)
|
|
{
|
|
qemu_irq *i8259;
|
|
|
|
if (kvm_pic_in_kernel()) {
|
|
i8259 = kvm_i8259_init(isa_bus);
|
|
} else if (xen_enabled()) {
|
|
i8259 = xen_interrupt_controller_init();
|
|
} else {
|
|
i8259 = i8259_init(isa_bus, x86_allocate_cpu_irq());
|
|
}
|
|
|
|
for (size_t i = 0; i < ISA_NUM_IRQS; i++) {
|
|
i8259_irqs[i] = i8259[i];
|
|
}
|
|
|
|
g_free(i8259);
|
|
}
|
|
|
|
static void pc_memory_pre_plug(HotplugHandler *hotplug_dev, DeviceState *dev,
|
|
Error **errp)
|
|
{
|
|
const PCMachineState *pcms = PC_MACHINE(hotplug_dev);
|
|
const X86MachineState *x86ms = X86_MACHINE(hotplug_dev);
|
|
const PCMachineClass *pcmc = PC_MACHINE_GET_CLASS(pcms);
|
|
const MachineState *ms = MACHINE(hotplug_dev);
|
|
const bool is_nvdimm = object_dynamic_cast(OBJECT(dev), TYPE_NVDIMM);
|
|
const uint64_t legacy_align = TARGET_PAGE_SIZE;
|
|
Error *local_err = NULL;
|
|
|
|
/*
|
|
* When -no-acpi is used with Q35 machine type, no ACPI is built,
|
|
* but pcms->acpi_dev is still created. Check !acpi_enabled in
|
|
* addition to cover this case.
|
|
*/
|
|
if (!x86ms->acpi_dev || !x86_machine_is_acpi_enabled(x86ms)) {
|
|
error_setg(errp,
|
|
"memory hotplug is not enabled: missing acpi device or acpi disabled");
|
|
return;
|
|
}
|
|
|
|
if (is_nvdimm && !ms->nvdimms_state->is_enabled) {
|
|
error_setg(errp, "nvdimm is not enabled: missing 'nvdimm' in '-M'");
|
|
return;
|
|
}
|
|
|
|
hotplug_handler_pre_plug(x86ms->acpi_dev, dev, &local_err);
|
|
if (local_err) {
|
|
error_propagate(errp, local_err);
|
|
return;
|
|
}
|
|
|
|
pc_dimm_pre_plug(PC_DIMM(dev), MACHINE(hotplug_dev),
|
|
pcmc->enforce_aligned_dimm ? NULL : &legacy_align, errp);
|
|
}
|
|
|
|
static void pc_memory_plug(HotplugHandler *hotplug_dev,
|
|
DeviceState *dev, Error **errp)
|
|
{
|
|
PCMachineState *pcms = PC_MACHINE(hotplug_dev);
|
|
X86MachineState *x86ms = X86_MACHINE(hotplug_dev);
|
|
MachineState *ms = MACHINE(hotplug_dev);
|
|
bool is_nvdimm = object_dynamic_cast(OBJECT(dev), TYPE_NVDIMM);
|
|
|
|
pc_dimm_plug(PC_DIMM(dev), MACHINE(pcms));
|
|
|
|
if (is_nvdimm) {
|
|
nvdimm_plug(ms->nvdimms_state);
|
|
}
|
|
|
|
hotplug_handler_plug(x86ms->acpi_dev, dev, &error_abort);
|
|
}
|
|
|
|
static void pc_memory_unplug_request(HotplugHandler *hotplug_dev,
|
|
DeviceState *dev, Error **errp)
|
|
{
|
|
X86MachineState *x86ms = X86_MACHINE(hotplug_dev);
|
|
|
|
/*
|
|
* When -no-acpi is used with Q35 machine type, no ACPI is built,
|
|
* but pcms->acpi_dev is still created. Check !acpi_enabled in
|
|
* addition to cover this case.
|
|
*/
|
|
if (!x86ms->acpi_dev || !x86_machine_is_acpi_enabled(x86ms)) {
|
|
error_setg(errp,
|
|
"memory hotplug is not enabled: missing acpi device or acpi disabled");
|
|
return;
|
|
}
|
|
|
|
if (object_dynamic_cast(OBJECT(dev), TYPE_NVDIMM)) {
|
|
error_setg(errp, "nvdimm device hot unplug is not supported yet.");
|
|
return;
|
|
}
|
|
|
|
hotplug_handler_unplug_request(x86ms->acpi_dev, dev,
|
|
errp);
|
|
}
|
|
|
|
static void pc_memory_unplug(HotplugHandler *hotplug_dev,
|
|
DeviceState *dev, Error **errp)
|
|
{
|
|
PCMachineState *pcms = PC_MACHINE(hotplug_dev);
|
|
X86MachineState *x86ms = X86_MACHINE(hotplug_dev);
|
|
Error *local_err = NULL;
|
|
|
|
hotplug_handler_unplug(x86ms->acpi_dev, dev, &local_err);
|
|
if (local_err) {
|
|
goto out;
|
|
}
|
|
|
|
pc_dimm_unplug(PC_DIMM(dev), MACHINE(pcms));
|
|
qdev_unrealize(dev);
|
|
out:
|
|
error_propagate(errp, local_err);
|
|
}
|
|
|
|
static void pc_virtio_md_pci_pre_plug(HotplugHandler *hotplug_dev,
|
|
DeviceState *dev, Error **errp)
|
|
{
|
|
HotplugHandler *hotplug_dev2 = qdev_get_bus_hotplug_handler(dev);
|
|
Error *local_err = NULL;
|
|
|
|
if (!hotplug_dev2 && dev->hotplugged) {
|
|
/*
|
|
* Without a bus hotplug handler, we cannot control the plug/unplug
|
|
* order. We should never reach this point when hotplugging on x86,
|
|
* however, better add a safety net.
|
|
*/
|
|
error_setg(errp, "hotplug of virtio based memory devices not supported"
|
|
" on this bus.");
|
|
return;
|
|
}
|
|
/*
|
|
* First, see if we can plug this memory device at all. If that
|
|
* succeeds, branch of to the actual hotplug handler.
|
|
*/
|
|
memory_device_pre_plug(MEMORY_DEVICE(dev), MACHINE(hotplug_dev), NULL,
|
|
&local_err);
|
|
if (!local_err && hotplug_dev2) {
|
|
hotplug_handler_pre_plug(hotplug_dev2, dev, &local_err);
|
|
}
|
|
error_propagate(errp, local_err);
|
|
}
|
|
|
|
static void pc_virtio_md_pci_plug(HotplugHandler *hotplug_dev,
|
|
DeviceState *dev, Error **errp)
|
|
{
|
|
HotplugHandler *hotplug_dev2 = qdev_get_bus_hotplug_handler(dev);
|
|
Error *local_err = NULL;
|
|
|
|
/*
|
|
* Plug the memory device first and then branch off to the actual
|
|
* hotplug handler. If that one fails, we can easily undo the memory
|
|
* device bits.
|
|
*/
|
|
memory_device_plug(MEMORY_DEVICE(dev), MACHINE(hotplug_dev));
|
|
if (hotplug_dev2) {
|
|
hotplug_handler_plug(hotplug_dev2, dev, &local_err);
|
|
if (local_err) {
|
|
memory_device_unplug(MEMORY_DEVICE(dev), MACHINE(hotplug_dev));
|
|
}
|
|
}
|
|
error_propagate(errp, local_err);
|
|
}
|
|
|
|
static void pc_virtio_md_pci_unplug_request(HotplugHandler *hotplug_dev,
|
|
DeviceState *dev, Error **errp)
|
|
{
|
|
/* We don't support hot unplug of virtio based memory devices */
|
|
error_setg(errp, "virtio based memory devices cannot be unplugged.");
|
|
}
|
|
|
|
static void pc_virtio_md_pci_unplug(HotplugHandler *hotplug_dev,
|
|
DeviceState *dev, Error **errp)
|
|
{
|
|
/* We don't support hot unplug of virtio based memory devices */
|
|
}
|
|
|
|
static void pc_machine_device_pre_plug_cb(HotplugHandler *hotplug_dev,
|
|
DeviceState *dev, Error **errp)
|
|
{
|
|
if (object_dynamic_cast(OBJECT(dev), TYPE_PC_DIMM)) {
|
|
pc_memory_pre_plug(hotplug_dev, dev, errp);
|
|
} else if (object_dynamic_cast(OBJECT(dev), TYPE_CPU)) {
|
|
x86_cpu_pre_plug(hotplug_dev, dev, errp);
|
|
} else if (object_dynamic_cast(OBJECT(dev), TYPE_VIRTIO_PMEM_PCI) ||
|
|
object_dynamic_cast(OBJECT(dev), TYPE_VIRTIO_MEM_PCI)) {
|
|
pc_virtio_md_pci_pre_plug(hotplug_dev, dev, errp);
|
|
}
|
|
}
|
|
|
|
static void pc_machine_device_plug_cb(HotplugHandler *hotplug_dev,
|
|
DeviceState *dev, Error **errp)
|
|
{
|
|
if (object_dynamic_cast(OBJECT(dev), TYPE_PC_DIMM)) {
|
|
pc_memory_plug(hotplug_dev, dev, errp);
|
|
} else if (object_dynamic_cast(OBJECT(dev), TYPE_CPU)) {
|
|
x86_cpu_plug(hotplug_dev, dev, errp);
|
|
} else if (object_dynamic_cast(OBJECT(dev), TYPE_VIRTIO_PMEM_PCI) ||
|
|
object_dynamic_cast(OBJECT(dev), TYPE_VIRTIO_MEM_PCI)) {
|
|
pc_virtio_md_pci_plug(hotplug_dev, dev, errp);
|
|
}
|
|
}
|
|
|
|
static void pc_machine_device_unplug_request_cb(HotplugHandler *hotplug_dev,
|
|
DeviceState *dev, Error **errp)
|
|
{
|
|
if (object_dynamic_cast(OBJECT(dev), TYPE_PC_DIMM)) {
|
|
pc_memory_unplug_request(hotplug_dev, dev, errp);
|
|
} else if (object_dynamic_cast(OBJECT(dev), TYPE_CPU)) {
|
|
x86_cpu_unplug_request_cb(hotplug_dev, dev, errp);
|
|
} else if (object_dynamic_cast(OBJECT(dev), TYPE_VIRTIO_PMEM_PCI) ||
|
|
object_dynamic_cast(OBJECT(dev), TYPE_VIRTIO_MEM_PCI)) {
|
|
pc_virtio_md_pci_unplug_request(hotplug_dev, dev, errp);
|
|
} else {
|
|
error_setg(errp, "acpi: device unplug request for not supported device"
|
|
" type: %s", object_get_typename(OBJECT(dev)));
|
|
}
|
|
}
|
|
|
|
static void pc_machine_device_unplug_cb(HotplugHandler *hotplug_dev,
|
|
DeviceState *dev, Error **errp)
|
|
{
|
|
if (object_dynamic_cast(OBJECT(dev), TYPE_PC_DIMM)) {
|
|
pc_memory_unplug(hotplug_dev, dev, errp);
|
|
} else if (object_dynamic_cast(OBJECT(dev), TYPE_CPU)) {
|
|
x86_cpu_unplug_cb(hotplug_dev, dev, errp);
|
|
} else if (object_dynamic_cast(OBJECT(dev), TYPE_VIRTIO_PMEM_PCI) ||
|
|
object_dynamic_cast(OBJECT(dev), TYPE_VIRTIO_MEM_PCI)) {
|
|
pc_virtio_md_pci_unplug(hotplug_dev, dev, errp);
|
|
} else {
|
|
error_setg(errp, "acpi: device unplug for not supported device"
|
|
" type: %s", object_get_typename(OBJECT(dev)));
|
|
}
|
|
}
|
|
|
|
static HotplugHandler *pc_get_hotplug_handler(MachineState *machine,
|
|
DeviceState *dev)
|
|
{
|
|
if (object_dynamic_cast(OBJECT(dev), TYPE_PC_DIMM) ||
|
|
object_dynamic_cast(OBJECT(dev), TYPE_CPU) ||
|
|
object_dynamic_cast(OBJECT(dev), TYPE_VIRTIO_PMEM_PCI) ||
|
|
object_dynamic_cast(OBJECT(dev), TYPE_VIRTIO_MEM_PCI)) {
|
|
return HOTPLUG_HANDLER(machine);
|
|
}
|
|
|
|
return NULL;
|
|
}
|
|
|
|
static void
|
|
pc_machine_get_device_memory_region_size(Object *obj, Visitor *v,
|
|
const char *name, void *opaque,
|
|
Error **errp)
|
|
{
|
|
MachineState *ms = MACHINE(obj);
|
|
int64_t value = 0;
|
|
|
|
if (ms->device_memory) {
|
|
value = memory_region_size(&ms->device_memory->mr);
|
|
}
|
|
|
|
visit_type_int(v, name, &value, errp);
|
|
}
|
|
|
|
static void pc_machine_get_vmport(Object *obj, Visitor *v, const char *name,
|
|
void *opaque, Error **errp)
|
|
{
|
|
PCMachineState *pcms = PC_MACHINE(obj);
|
|
OnOffAuto vmport = pcms->vmport;
|
|
|
|
visit_type_OnOffAuto(v, name, &vmport, errp);
|
|
}
|
|
|
|
static void pc_machine_set_vmport(Object *obj, Visitor *v, const char *name,
|
|
void *opaque, Error **errp)
|
|
{
|
|
PCMachineState *pcms = PC_MACHINE(obj);
|
|
|
|
visit_type_OnOffAuto(v, name, &pcms->vmport, errp);
|
|
}
|
|
|
|
static bool pc_machine_get_smbus(Object *obj, Error **errp)
|
|
{
|
|
PCMachineState *pcms = PC_MACHINE(obj);
|
|
|
|
return pcms->smbus_enabled;
|
|
}
|
|
|
|
static void pc_machine_set_smbus(Object *obj, bool value, Error **errp)
|
|
{
|
|
PCMachineState *pcms = PC_MACHINE(obj);
|
|
|
|
pcms->smbus_enabled = value;
|
|
}
|
|
|
|
static bool pc_machine_get_sata(Object *obj, Error **errp)
|
|
{
|
|
PCMachineState *pcms = PC_MACHINE(obj);
|
|
|
|
return pcms->sata_enabled;
|
|
}
|
|
|
|
static void pc_machine_set_sata(Object *obj, bool value, Error **errp)
|
|
{
|
|
PCMachineState *pcms = PC_MACHINE(obj);
|
|
|
|
pcms->sata_enabled = value;
|
|
}
|
|
|
|
static bool pc_machine_get_pit(Object *obj, Error **errp)
|
|
{
|
|
PCMachineState *pcms = PC_MACHINE(obj);
|
|
|
|
return pcms->pit_enabled;
|
|
}
|
|
|
|
static void pc_machine_set_pit(Object *obj, bool value, Error **errp)
|
|
{
|
|
PCMachineState *pcms = PC_MACHINE(obj);
|
|
|
|
pcms->pit_enabled = value;
|
|
}
|
|
|
|
static bool pc_machine_get_hpet(Object *obj, Error **errp)
|
|
{
|
|
PCMachineState *pcms = PC_MACHINE(obj);
|
|
|
|
return pcms->hpet_enabled;
|
|
}
|
|
|
|
static void pc_machine_set_hpet(Object *obj, bool value, Error **errp)
|
|
{
|
|
PCMachineState *pcms = PC_MACHINE(obj);
|
|
|
|
pcms->hpet_enabled = value;
|
|
}
|
|
|
|
static void pc_machine_get_max_ram_below_4g(Object *obj, Visitor *v,
|
|
const char *name, void *opaque,
|
|
Error **errp)
|
|
{
|
|
PCMachineState *pcms = PC_MACHINE(obj);
|
|
uint64_t value = pcms->max_ram_below_4g;
|
|
|
|
visit_type_size(v, name, &value, errp);
|
|
}
|
|
|
|
static void pc_machine_set_max_ram_below_4g(Object *obj, Visitor *v,
|
|
const char *name, void *opaque,
|
|
Error **errp)
|
|
{
|
|
PCMachineState *pcms = PC_MACHINE(obj);
|
|
uint64_t value;
|
|
|
|
if (!visit_type_size(v, name, &value, errp)) {
|
|
return;
|
|
}
|
|
if (value > 4 * GiB) {
|
|
error_setg(errp,
|
|
"Machine option 'max-ram-below-4g=%"PRIu64
|
|
"' expects size less than or equal to 4G", value);
|
|
return;
|
|
}
|
|
|
|
if (value < 1 * MiB) {
|
|
warn_report("Only %" PRIu64 " bytes of RAM below the 4GiB boundary,"
|
|
"BIOS may not work with less than 1MiB", value);
|
|
}
|
|
|
|
pcms->max_ram_below_4g = value;
|
|
}
|
|
|
|
static void pc_machine_get_max_fw_size(Object *obj, Visitor *v,
|
|
const char *name, void *opaque,
|
|
Error **errp)
|
|
{
|
|
PCMachineState *pcms = PC_MACHINE(obj);
|
|
uint64_t value = pcms->max_fw_size;
|
|
|
|
visit_type_size(v, name, &value, errp);
|
|
}
|
|
|
|
static void pc_machine_set_max_fw_size(Object *obj, Visitor *v,
|
|
const char *name, void *opaque,
|
|
Error **errp)
|
|
{
|
|
PCMachineState *pcms = PC_MACHINE(obj);
|
|
Error *error = NULL;
|
|
uint64_t value;
|
|
|
|
visit_type_size(v, name, &value, &error);
|
|
if (error) {
|
|
error_propagate(errp, error);
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* We don't have a theoretically justifiable exact lower bound on the base
|
|
* address of any flash mapping. In practice, the IO-APIC MMIO range is
|
|
* [0xFEE00000..0xFEE01000] -- see IO_APIC_DEFAULT_ADDRESS --, leaving free
|
|
* only 18MB-4KB below 4G. For now, restrict the cumulative mapping to 8MB in
|
|
* size.
|
|
*/
|
|
if (value > 16 * MiB) {
|
|
error_setg(errp,
|
|
"User specified max allowed firmware size %" PRIu64 " is "
|
|
"greater than 16MiB. If combined firwmare size exceeds "
|
|
"16MiB the system may not boot, or experience intermittent"
|
|
"stability issues.",
|
|
value);
|
|
return;
|
|
}
|
|
|
|
pcms->max_fw_size = value;
|
|
}
|
|
|
|
static void pc_machine_initfn(Object *obj)
|
|
{
|
|
PCMachineState *pcms = PC_MACHINE(obj);
|
|
|
|
#ifdef CONFIG_VMPORT
|
|
pcms->vmport = ON_OFF_AUTO_AUTO;
|
|
#else
|
|
pcms->vmport = ON_OFF_AUTO_OFF;
|
|
#endif /* CONFIG_VMPORT */
|
|
pcms->max_ram_below_4g = 0; /* use default */
|
|
/* acpi build is enabled by default if machine supports it */
|
|
pcms->acpi_build_enabled = PC_MACHINE_GET_CLASS(pcms)->has_acpi_build;
|
|
pcms->smbus_enabled = true;
|
|
pcms->sata_enabled = true;
|
|
pcms->pit_enabled = true;
|
|
pcms->max_fw_size = 8 * MiB;
|
|
#ifdef CONFIG_HPET
|
|
pcms->hpet_enabled = true;
|
|
#endif
|
|
|
|
pc_system_flash_create(pcms);
|
|
pcms->pcspk = isa_new(TYPE_PC_SPEAKER);
|
|
object_property_add_alias(OBJECT(pcms), "pcspk-audiodev",
|
|
OBJECT(pcms->pcspk), "audiodev");
|
|
}
|
|
|
|
static void pc_machine_reset(MachineState *machine)
|
|
{
|
|
CPUState *cs;
|
|
X86CPU *cpu;
|
|
|
|
qemu_devices_reset();
|
|
|
|
/* Reset APIC after devices have been reset to cancel
|
|
* any changes that qemu_devices_reset() might have done.
|
|
*/
|
|
CPU_FOREACH(cs) {
|
|
cpu = X86_CPU(cs);
|
|
|
|
if (cpu->apic_state) {
|
|
device_legacy_reset(cpu->apic_state);
|
|
}
|
|
}
|
|
}
|
|
|
|
static void pc_machine_wakeup(MachineState *machine)
|
|
{
|
|
cpu_synchronize_all_states();
|
|
pc_machine_reset(machine);
|
|
cpu_synchronize_all_post_reset();
|
|
}
|
|
|
|
static bool pc_hotplug_allowed(MachineState *ms, DeviceState *dev, Error **errp)
|
|
{
|
|
X86IOMMUState *iommu = x86_iommu_get_default();
|
|
IntelIOMMUState *intel_iommu;
|
|
|
|
if (iommu &&
|
|
object_dynamic_cast((Object *)iommu, TYPE_INTEL_IOMMU_DEVICE) &&
|
|
object_dynamic_cast((Object *)dev, "vfio-pci")) {
|
|
intel_iommu = INTEL_IOMMU_DEVICE(iommu);
|
|
if (!intel_iommu->caching_mode) {
|
|
error_setg(errp, "Device assignment is not allowed without "
|
|
"enabling caching-mode=on for Intel IOMMU.");
|
|
return false;
|
|
}
|
|
}
|
|
|
|
return true;
|
|
}
|
|
|
|
static void pc_machine_class_init(ObjectClass *oc, void *data)
|
|
{
|
|
MachineClass *mc = MACHINE_CLASS(oc);
|
|
PCMachineClass *pcmc = PC_MACHINE_CLASS(oc);
|
|
HotplugHandlerClass *hc = HOTPLUG_HANDLER_CLASS(oc);
|
|
|
|
pcmc->pci_enabled = true;
|
|
pcmc->has_acpi_build = true;
|
|
pcmc->rsdp_in_ram = true;
|
|
pcmc->smbios_defaults = true;
|
|
pcmc->smbios_uuid_encoded = true;
|
|
pcmc->gigabyte_align = true;
|
|
pcmc->has_reserved_memory = true;
|
|
pcmc->kvmclock_enabled = true;
|
|
pcmc->enforce_aligned_dimm = true;
|
|
/* BIOS ACPI tables: 128K. Other BIOS datastructures: less than 4K reported
|
|
* to be used at the moment, 32K should be enough for a while. */
|
|
pcmc->acpi_data_size = 0x20000 + 0x8000;
|
|
pcmc->linuxboot_dma_enabled = true;
|
|
pcmc->pvh_enabled = true;
|
|
pcmc->kvmclock_create_always = true;
|
|
assert(!mc->get_hotplug_handler);
|
|
mc->get_hotplug_handler = pc_get_hotplug_handler;
|
|
mc->hotplug_allowed = pc_hotplug_allowed;
|
|
mc->cpu_index_to_instance_props = x86_cpu_index_to_props;
|
|
mc->get_default_cpu_node_id = x86_get_default_cpu_node_id;
|
|
mc->possible_cpu_arch_ids = x86_possible_cpu_arch_ids;
|
|
mc->auto_enable_numa_with_memhp = true;
|
|
mc->auto_enable_numa_with_memdev = true;
|
|
mc->has_hotpluggable_cpus = true;
|
|
mc->default_boot_order = "cad";
|
|
mc->smp_parse = pc_smp_parse;
|
|
mc->block_default_type = IF_IDE;
|
|
mc->max_cpus = 255;
|
|
mc->reset = pc_machine_reset;
|
|
mc->wakeup = pc_machine_wakeup;
|
|
hc->pre_plug = pc_machine_device_pre_plug_cb;
|
|
hc->plug = pc_machine_device_plug_cb;
|
|
hc->unplug_request = pc_machine_device_unplug_request_cb;
|
|
hc->unplug = pc_machine_device_unplug_cb;
|
|
mc->default_cpu_type = TARGET_DEFAULT_CPU_TYPE;
|
|
mc->nvdimm_supported = true;
|
|
mc->default_ram_id = "pc.ram";
|
|
|
|
object_class_property_add(oc, PC_MACHINE_MAX_RAM_BELOW_4G, "size",
|
|
pc_machine_get_max_ram_below_4g, pc_machine_set_max_ram_below_4g,
|
|
NULL, NULL);
|
|
object_class_property_set_description(oc, PC_MACHINE_MAX_RAM_BELOW_4G,
|
|
"Maximum ram below the 4G boundary (32bit boundary)");
|
|
|
|
object_class_property_add(oc, PC_MACHINE_DEVMEM_REGION_SIZE, "int",
|
|
pc_machine_get_device_memory_region_size, NULL,
|
|
NULL, NULL);
|
|
|
|
object_class_property_add(oc, PC_MACHINE_VMPORT, "OnOffAuto",
|
|
pc_machine_get_vmport, pc_machine_set_vmport,
|
|
NULL, NULL);
|
|
object_class_property_set_description(oc, PC_MACHINE_VMPORT,
|
|
"Enable vmport (pc & q35)");
|
|
|
|
object_class_property_add_bool(oc, PC_MACHINE_SMBUS,
|
|
pc_machine_get_smbus, pc_machine_set_smbus);
|
|
|
|
object_class_property_add_bool(oc, PC_MACHINE_SATA,
|
|
pc_machine_get_sata, pc_machine_set_sata);
|
|
|
|
object_class_property_add_bool(oc, PC_MACHINE_PIT,
|
|
pc_machine_get_pit, pc_machine_set_pit);
|
|
|
|
object_class_property_add_bool(oc, "hpet",
|
|
pc_machine_get_hpet, pc_machine_set_hpet);
|
|
|
|
object_class_property_add(oc, PC_MACHINE_MAX_FW_SIZE, "size",
|
|
pc_machine_get_max_fw_size, pc_machine_set_max_fw_size,
|
|
NULL, NULL);
|
|
object_class_property_set_description(oc, PC_MACHINE_MAX_FW_SIZE,
|
|
"Maximum combined firmware size");
|
|
}
|
|
|
|
static const TypeInfo pc_machine_info = {
|
|
.name = TYPE_PC_MACHINE,
|
|
.parent = TYPE_X86_MACHINE,
|
|
.abstract = true,
|
|
.instance_size = sizeof(PCMachineState),
|
|
.instance_init = pc_machine_initfn,
|
|
.class_size = sizeof(PCMachineClass),
|
|
.class_init = pc_machine_class_init,
|
|
.interfaces = (InterfaceInfo[]) {
|
|
{ TYPE_HOTPLUG_HANDLER },
|
|
{ }
|
|
},
|
|
};
|
|
|
|
static void pc_machine_register_types(void)
|
|
{
|
|
type_register_static(&pc_machine_info);
|
|
}
|
|
|
|
type_init(pc_machine_register_types)
|