qemu/hw/acpi_piix4.c

/*
 * ACPI implementation
 *
 * Copyright (c) 2006 Fabrice Bellard
 *
 * This library is free software; you can redistribute it and/or
 * modify it under the terms of the GNU Lesser General Public
 * License version 2 as published by the Free Software Foundation.
 *
 * This library is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
 * Lesser General Public License for more details.
 *
 * You should have received a copy of the GNU Lesser General Public
 * License along with this library; if not, see <http://www.gnu.org/licenses/>
 */
#include "hw.h"
#include "pc.h"
#include "apm.h"
#include "pm_smbus.h"
#include "pci.h"
#include "acpi.h"
#include "sysemu.h"
#include "range.h"

//#define DEBUG

#ifdef DEBUG
# define PIIX4_DPRINTF(format, ...)     printf(format, ## __VA_ARGS__)
#else
# define PIIX4_DPRINTF(format, ...)     do { } while (0)
#endif

#define ACPI_DBG_IO_ADDR  0xb044

#define GPE_BASE 0xafe0
#define PCI_BASE 0xae00
#define PCI_EJ_BASE 0xae08
#define PCI_RMV_BASE 0xae0c

#define PIIX4_PCI_HOTPLUG_STATUS 2

struct gpe_regs {
    uint16_t sts; /* status */
    uint16_t en;  /* enabled */
};

struct pci_status {
    uint32_t up;
    uint32_t down;
};

typedef struct PIIX4PMState {
    PCIDevice dev;
    IORange ioport;
    uint16_t pmsts;
    uint16_t pmen;
    uint16_t pmcntrl;

    APMState apm;

    QEMUTimer *tmr_timer;
    int64_t tmr_overflow_time;

    PMSMBus smb;
    uint32_t smb_io_base;

    qemu_irq irq;
    qemu_irq cmos_s3;
    qemu_irq smi_irq;
    int kvm_enabled;

    /* for pci hotplug */
    struct gpe_regs gpe;
    struct pci_status pci0_status;
    uint32_t pci0_hotplug_enable;
} PIIX4PMState;

static void piix4_acpi_system_hot_add_init(PCIBus *bus, PIIX4PMState *s);

#define ACPI_ENABLE 0xf1
#define ACPI_DISABLE 0xf0

static uint32_t get_pmtmr(PIIX4PMState *s)
{
    uint32_t d;
    d = muldiv64(qemu_get_clock_ns(vm_clock), PM_TIMER_FREQUENCY, get_ticks_per_sec());
    return d & 0xffffff;
}

static int get_pmsts(PIIX4PMState *s)
{
    int64_t d;

    d = muldiv64(qemu_get_clock_ns(vm_clock), PM_TIMER_FREQUENCY,
                 get_ticks_per_sec());
    if (d >= s->tmr_overflow_time)
        s->pmsts |= ACPI_BITMASK_TIMER_STATUS;
    return s->pmsts;
}

static void pm_update_sci(PIIX4PMState *s)
{
    int sci_level, pmsts;
    int64_t expire_time;

    pmsts = get_pmsts(s);
    sci_level = (((pmsts & s->pmen) &
                  (ACPI_BITMASK_RT_CLOCK_ENABLE |
                   ACPI_BITMASK_POWER_BUTTON_ENABLE |
                   ACPI_BITMASK_GLOBAL_LOCK_ENABLE |
                   ACPI_BITMASK_TIMER_ENABLE)) != 0) ||
        (((s->gpe.sts & s->gpe.en) & PIIX4_PCI_HOTPLUG_STATUS) != 0);

    qemu_set_irq(s->irq, sci_level);
    /* schedule a timer interruption if needed */
    if ((s->pmen & ACPI_BITMASK_TIMER_ENABLE) &&
        !(pmsts & ACPI_BITMASK_TIMER_STATUS)) {
        expire_time = muldiv64(s->tmr_overflow_time, get_ticks_per_sec(),
                               PM_TIMER_FREQUENCY);
        qemu_mod_timer(s->tmr_timer, expire_time);
    } else {
        qemu_del_timer(s->tmr_timer);
    }
}

static void pm_tmr_timer(void *opaque)
{
    PIIX4PMState *s = opaque;
    pm_update_sci(s);
}

static void pm_ioport_write(IORange *ioport, uint64_t addr, unsigned width,
                            uint64_t val)
{
    PIIX4PMState *s = container_of(ioport, PIIX4PMState, ioport);

    if (width != 2) {
        PIIX4_DPRINTF("PM write port=0x%04x width=%d val=0x%08x\n",
                      (unsigned)addr, width, (unsigned)val);
    }

    switch(addr) {
    case 0x00:
        {
            int64_t d;
            int pmsts;
            pmsts = get_pmsts(s);
            if (pmsts & val & ACPI_BITMASK_TIMER_STATUS) {
                /* if TMRSTS is reset, then compute the new overflow time */
                d = muldiv64(qemu_get_clock_ns(vm_clock), PM_TIMER_FREQUENCY,
                             get_ticks_per_sec());
                s->tmr_overflow_time = (d + 0x800000LL) & ~0x7fffffLL;
            }
            s->pmsts &= ~val;
            pm_update_sci(s);
        }
        break;
    case 0x02:
        s->pmen = val;
        pm_update_sci(s);
        break;
    case 0x04:
        {
            int sus_typ;
            s->pmcntrl = val & ~(ACPI_BITMASK_SLEEP_ENABLE);
            if (val & ACPI_BITMASK_SLEEP_ENABLE) {
                /* change suspend type */
                sus_typ = (val >> 10) & 7;
                switch(sus_typ) {
                case 0: /* soft power off */
                    qemu_system_shutdown_request();
                    break;
                case 1:
                    /* ACPI_BITMASK_WAKE_STATUS should be set on resume.
                       Pretend that resume was caused by power button */
                    s->pmsts |= (ACPI_BITMASK_WAKE_STATUS |
                                 ACPI_BITMASK_POWER_BUTTON_STATUS);
                    qemu_system_reset_request();
                    if (s->cmos_s3) {
                        qemu_irq_raise(s->cmos_s3);
                    }
                default:
                    break;
                }
            }
        }
        break;
    default:
        break;
    }
    PIIX4_DPRINTF("PM writew port=0x%04x val=0x%04x\n", (unsigned int)addr,
                  (unsigned int)val);
}

static void pm_ioport_read(IORange *ioport, uint64_t addr, unsigned width,
                            uint64_t *data)
{
    PIIX4PMState *s = container_of(ioport, PIIX4PMState, ioport);
    uint32_t val;

    switch(addr) {
    case 0x00:
        val = get_pmsts(s);
        break;
    case 0x02:
        val = s->pmen;
        break;
    case 0x04:
        val = s->pmcntrl;
        break;
    case 0x08:
        val = get_pmtmr(s);
        break;
    default:
        val = 0;
        break;
    }
    PIIX4_DPRINTF("PM readw port=0x%04x val=0x%04x\n", (unsigned int)addr, val);
    *data = val;
}

static const IORangeOps pm_iorange_ops = {
    .read = pm_ioport_read,
    .write = pm_ioport_write,
};

static void apm_ctrl_changed(uint32_t val, void *arg)
{
    PIIX4PMState *s = arg;

    /* ACPI specs 3.0, 4.7.2.5 */
    if (val == ACPI_ENABLE) {
        s->pmcntrl |= ACPI_BITMASK_SCI_ENABLE;
    } else if (val == ACPI_DISABLE) {
        s->pmcntrl &= ~ACPI_BITMASK_SCI_ENABLE;
    }

    if (s->dev.config[0x5b] & (1 << 1)) {
        if (s->smi_irq) {
            qemu_irq_raise(s->smi_irq);
        }
    }
}

static void acpi_dbg_writel(void *opaque, uint32_t addr, uint32_t val)
{
    PIIX4_DPRINTF("ACPI: DBG: 0x%08x\n", val);
}

static void pm_io_space_update(PIIX4PMState *s)
{
    uint32_t pm_io_base;

    if (s->dev.config[0x80] & 1) {
        pm_io_base = le32_to_cpu(*(uint32_t *)(s->dev.config + 0x40));
        pm_io_base &= 0xffc0;

        /* XXX: need to improve memory and ioport allocation */
        PIIX4_DPRINTF("PM: mapping to 0x%x\n", pm_io_base);
        iorange_init(&s->ioport, &pm_iorange_ops, pm_io_base, 64);
        ioport_register(&s->ioport);
    }
}

static void pm_write_config(PCIDevice *d,
                            uint32_t address, uint32_t val, int len)
{
    pci_default_write_config(d, address, val, len);
    if (range_covers_byte(address, len, 0x80))
        pm_io_space_update((PIIX4PMState *)d);
}

static int vmstate_acpi_post_load(void *opaque, int version_id)
{
    PIIX4PMState *s = opaque;

    pm_io_space_update(s);
    return 0;
}

static const VMStateDescription vmstate_gpe = {
    .name = "gpe",
    .version_id = 1,
    .minimum_version_id = 1,
    .minimum_version_id_old = 1,
    .fields      = (VMStateField []) {
        VMSTATE_UINT16(sts, struct gpe_regs),
        VMSTATE_UINT16(en, struct gpe_regs),
        VMSTATE_END_OF_LIST()
    }
};

static const VMStateDescription vmstate_pci_status = {
    .name = "pci_status",
    .version_id = 1,
    .minimum_version_id = 1,
    .minimum_version_id_old = 1,
    .fields      = (VMStateField []) {
        VMSTATE_UINT32(up, struct pci_status),
        VMSTATE_UINT32(down, struct pci_status),
        VMSTATE_END_OF_LIST()
    }
};

static const VMStateDescription vmstate_acpi = {
    .name = "piix4_pm",
    .version_id = 2,
    .minimum_version_id = 1,
    .minimum_version_id_old = 1,
    .post_load = vmstate_acpi_post_load,
    .fields      = (VMStateField []) {
        VMSTATE_PCI_DEVICE(dev, PIIX4PMState),
        VMSTATE_UINT16(pmsts, PIIX4PMState),
        VMSTATE_UINT16(pmen, PIIX4PMState),
        VMSTATE_UINT16(pmcntrl, PIIX4PMState),
        VMSTATE_STRUCT(apm, PIIX4PMState, 0, vmstate_apm, APMState),
        VMSTATE_TIMER(tmr_timer, PIIX4PMState),
        VMSTATE_INT64(tmr_overflow_time, PIIX4PMState),
        VMSTATE_STRUCT(gpe, PIIX4PMState, 2, vmstate_gpe, struct gpe_regs),
        VMSTATE_STRUCT(pci0_status, PIIX4PMState, 2, vmstate_pci_status,
                       struct pci_status),
        VMSTATE_END_OF_LIST()
    }
};

static void piix4_update_hotplug(PIIX4PMState *s)
{
    PCIDevice *dev = &s->dev;
    BusState *bus = qdev_get_parent_bus(&dev->qdev);
    DeviceState *qdev, *next;

    s->pci0_hotplug_enable = ~0;

    QLIST_FOREACH_SAFE(qdev, &bus->children, sibling, next) {
        PCIDeviceInfo *info = container_of(qdev->info, PCIDeviceInfo, qdev);
        PCIDevice *pdev = DO_UPCAST(PCIDevice, qdev, qdev);
        int slot = PCI_SLOT(pdev->devfn);

        if (info->no_hotplug) {
            s->pci0_hotplug_enable &= ~(1 << slot);
        }
    }
}

static void piix4_reset(void *opaque)
{
    PIIX4PMState *s = opaque;
    uint8_t *pci_conf = s->dev.config;

    pci_conf[0x58] = 0;
    pci_conf[0x59] = 0;
    pci_conf[0x5a] = 0;
    pci_conf[0x5b] = 0;

    if (s->kvm_enabled) {
        /* Mark SMM as already inited (until KVM supports SMM). */
        pci_conf[0x5B] = 0x02;
    }
    piix4_update_hotplug(s);
}

static void piix4_powerdown(void *opaque, int irq, int power_failing)
{
    PIIX4PMState *s = opaque;

    if (!s) {
        qemu_system_shutdown_request();
    } else if (s->pmen & ACPI_BITMASK_POWER_BUTTON_ENABLE) {
        s->pmsts |= ACPI_BITMASK_POWER_BUTTON_STATUS;
        pm_update_sci(s);
    }
}

static int piix4_pm_initfn(PCIDevice *dev)
{
    PIIX4PMState *s = DO_UPCAST(PIIX4PMState, dev, dev);
    uint8_t *pci_conf;

    pci_conf = s->dev.config;
    pci_config_set_vendor_id(pci_conf, PCI_VENDOR_ID_INTEL);
    pci_config_set_device_id(pci_conf, PCI_DEVICE_ID_INTEL_82371AB_3);
    pci_conf[0x06] = 0x80;
    pci_conf[0x07] = 0x02;
    pci_conf[0x08] = 0x03; // revision number
    pci_conf[0x09] = 0x00;
    pci_config_set_class(pci_conf, PCI_CLASS_BRIDGE_OTHER);
    pci_conf[0x3d] = 0x01; // interrupt pin 1

    pci_conf[0x40] = 0x01; /* PM io base read only bit */

    /* APM */
    apm_init(&s->apm, apm_ctrl_changed, s);

    register_ioport_write(ACPI_DBG_IO_ADDR, 4, 4, acpi_dbg_writel, s);

    if (s->kvm_enabled) {
        /* Mark SMM as already inited to prevent SMM from running.  KVM does not
         * support SMM mode. */
        pci_conf[0x5B] = 0x02;
    }

    /* XXX: which specification is used ? The i82731AB has different
       mappings */
    pci_conf[0x5f] = (parallel_hds[0] != NULL ? 0x80 : 0) | 0x10;
    pci_conf[0x63] = 0x60;
    pci_conf[0x67] = (serial_hds[0] != NULL ? 0x08 : 0) |
	(serial_hds[1] != NULL ? 0x90 : 0);

    pci_conf[0x90] = s->smb_io_base | 1;
    pci_conf[0x91] = s->smb_io_base >> 8;
    pci_conf[0xd2] = 0x09;
    register_ioport_write(s->smb_io_base, 64, 1, smb_ioport_writeb, &s->smb);
    register_ioport_read(s->smb_io_base, 64, 1, smb_ioport_readb, &s->smb);

    s->tmr_timer = qemu_new_timer_ns(vm_clock, pm_tmr_timer, s);

    qemu_system_powerdown = *qemu_allocate_irqs(piix4_powerdown, s, 1);

    pm_smbus_init(&s->dev.qdev, &s->smb);
    qemu_register_reset(piix4_reset, s);
    piix4_acpi_system_hot_add_init(dev->bus, s);

    return 0;
}

i2c_bus *piix4_pm_init(PCIBus *bus, int devfn, uint32_t smb_io_base,
                       qemu_irq sci_irq, qemu_irq cmos_s3, qemu_irq smi_irq,
                       int kvm_enabled)
{
    PCIDevice *dev;
    PIIX4PMState *s;

    dev = pci_create(bus, devfn, "PIIX4_PM");
    qdev_prop_set_uint32(&dev->qdev, "smb_io_base", smb_io_base);

    s = DO_UPCAST(PIIX4PMState, dev, dev);
    s->irq = sci_irq;
    s->cmos_s3 = cmos_s3;
    s->smi_irq = smi_irq;
    s->kvm_enabled = kvm_enabled;

    qdev_init_nofail(&dev->qdev);

    return s->smb.smbus;
}

static PCIDeviceInfo piix4_pm_info = {
    .qdev.name          = "PIIX4_PM",
    .qdev.desc          = "PM",
    .qdev.size          = sizeof(PIIX4PMState),
    .qdev.vmsd          = &vmstate_acpi,
    .qdev.no_user       = 1,
    .no_hotplug         = 1,
    .init               = piix4_pm_initfn,
    .config_write       = pm_write_config,
    .qdev.props         = (Property[]) {
        DEFINE_PROP_UINT32("smb_io_base", PIIX4PMState, smb_io_base, 0),
        DEFINE_PROP_END_OF_LIST(),
    }
};

static void piix4_pm_register(void)
{
    pci_qdev_register(&piix4_pm_info);
}

device_init(piix4_pm_register);

static uint32_t gpe_read_val(uint16_t val, uint32_t addr)
{
    if (addr & 1)
        return (val >> 8) & 0xff;
    return val & 0xff;
}

static uint32_t gpe_readb(void *opaque, uint32_t addr)
{
    uint32_t val = 0;
    PIIX4PMState *s = opaque;
    struct gpe_regs *g = &s->gpe;

    switch (addr) {
        case GPE_BASE:
        case GPE_BASE + 1:
            val = gpe_read_val(g->sts, addr);
            break;
        case GPE_BASE + 2:
        case GPE_BASE + 3:
            val = gpe_read_val(g->en, addr);
            break;
        default:
            break;
    }

    PIIX4_DPRINTF("gpe read %x == %x\n", addr, val);
    return val;
}

static void gpe_write_val(uint16_t *cur, int addr, uint32_t val)
{
    if (addr & 1)
        *cur = (*cur & 0xff) | (val << 8);
    else
        *cur = (*cur & 0xff00) | (val & 0xff);
}

static void gpe_reset_val(uint16_t *cur, int addr, uint32_t val)
{
    uint16_t x1, x0 = val & 0xff;
    int shift = (addr & 1) ? 8 : 0;

    x1 = (*cur >> shift) & 0xff;

    x1 = x1 & ~x0;

    *cur = (*cur & (0xff << (8 - shift))) | (x1 << shift);
}

static void gpe_writeb(void *opaque, uint32_t addr, uint32_t val)
{
    PIIX4PMState *s = opaque;
    struct gpe_regs *g = &s->gpe;

    switch (addr) {
        case GPE_BASE:
        case GPE_BASE + 1:
            gpe_reset_val(&g->sts, addr, val);
            break;
        case GPE_BASE + 2:
        case GPE_BASE + 3:
            gpe_write_val(&g->en, addr, val);
            break;
        default:
            break;
    }

    pm_update_sci(s);

    PIIX4_DPRINTF("gpe write %x <== %d\n", addr, val);
}

static uint32_t pcihotplug_read(void *opaque, uint32_t addr)
{
    uint32_t val = 0;
    struct pci_status *g = opaque;
    switch (addr) {
        case PCI_BASE:
            val = g->up;
            break;
        case PCI_BASE + 4:
            val = g->down;
            break;
        default:
            break;
    }

    PIIX4_DPRINTF("pcihotplug read %x == %x\n", addr, val);
    return val;
}

static void pcihotplug_write(void *opaque, uint32_t addr, uint32_t val)
{
    struct pci_status *g = opaque;
    switch (addr) {
        case PCI_BASE:
            g->up = val;
            break;
        case PCI_BASE + 4:
            g->down = val;
            break;
   }

    PIIX4_DPRINTF("pcihotplug write %x <== %d\n", addr, val);
}

static uint32_t pciej_read(void *opaque, uint32_t addr)
{
    PIIX4_DPRINTF("pciej read %x\n", addr);
    return 0;
}

static void pciej_write(void *opaque, uint32_t addr, uint32_t val)
{
    BusState *bus = opaque;
    DeviceState *qdev, *next;
    PCIDevice *dev;
    int slot = ffs(val) - 1;

    QLIST_FOREACH_SAFE(qdev, &bus->children, sibling, next) {
        dev = DO_UPCAST(PCIDevice, qdev, qdev);
        if (PCI_SLOT(dev->devfn) == slot) {
            qdev_free(qdev);
        }
    }


    PIIX4_DPRINTF("pciej write %x <== %d\n", addr, val);
}

static uint32_t pcirmv_read(void *opaque, uint32_t addr)
{
    PIIX4PMState *s = opaque;

    return s->pci0_hotplug_enable;
}

static void pcirmv_write(void *opaque, uint32_t addr, uint32_t val)
{
    return;
}

static int piix4_device_hotplug(DeviceState *qdev, PCIDevice *dev,
                                PCIHotplugState state);

static void piix4_acpi_system_hot_add_init(PCIBus *bus, PIIX4PMState *s)
{
    struct pci_status *pci0_status = &s->pci0_status;

    register_ioport_write(GPE_BASE, 4, 1, gpe_writeb, s);
    register_ioport_read(GPE_BASE, 4, 1,  gpe_readb, s);

    register_ioport_write(PCI_BASE, 8, 4, pcihotplug_write, pci0_status);
    register_ioport_read(PCI_BASE, 8, 4,  pcihotplug_read, pci0_status);

    register_ioport_write(PCI_EJ_BASE, 4, 4, pciej_write, bus);
    register_ioport_read(PCI_EJ_BASE, 4, 4,  pciej_read, bus);

    register_ioport_write(PCI_RMV_BASE, 4, 4, pcirmv_write, s);
    register_ioport_read(PCI_RMV_BASE, 4, 4,  pcirmv_read, s);

    pci_bus_hotplug(bus, piix4_device_hotplug, &s->dev.qdev);
}

static void enable_device(PIIX4PMState *s, int slot)
{
    s->gpe.sts |= PIIX4_PCI_HOTPLUG_STATUS;
    s->pci0_status.up |= (1 << slot);
}

static void disable_device(PIIX4PMState *s, int slot)
{
    s->gpe.sts |= PIIX4_PCI_HOTPLUG_STATUS;
    s->pci0_status.down |= (1 << slot);
}

static int piix4_device_hotplug(DeviceState *qdev, PCIDevice *dev,
				PCIHotplugState state)
{
    int slot = PCI_SLOT(dev->devfn);
    PIIX4PMState *s = DO_UPCAST(PIIX4PMState, dev,
                                DO_UPCAST(PCIDevice, qdev, qdev));

    /* Don't send event when device is enabled during qemu machine creation:
     * it is present on boot, no hotplug event is necessary. We do send an
     * event when the device is disabled later. */
    if (state == PCI_COLDPLUG_ENABLED) {
        return 0;
    }

    s->pci0_status.up = 0;
    s->pci0_status.down = 0;
    if (state == PCI_HOTPLUG_ENABLED) {
        enable_device(s, slot);
    } else {
        disable_device(s, slot);
    }

    pm_update_sci(s);

    return 0;
}