qemu/hw/intc/xilinx_intc.c
Peter Crosthwaite afd59989db intc/xilinx_intc: Dont lower IRQ when HIE cleared
This is a little strange. It is lowering the parent IRQ pin on input
when HIE is cleared. There is no such behaviour in the real hardware.

ISR changes based on interrupt pin state are already guarded on HIE
being set. So we can just delete this if in its entirety.

Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2013-06-18 09:45:00 +02:00

195 lines
5.0 KiB
C

/*
* QEMU Xilinx OPB Interrupt Controller.
*
* Copyright (c) 2009 Edgar E. Iglesias.
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#include "hw/sysbus.h"
#include "hw/hw.h"
#define D(x)
#define R_ISR 0
#define R_IPR 1
#define R_IER 2
#define R_IAR 3
#define R_SIE 4
#define R_CIE 5
#define R_IVR 6
#define R_MER 7
#define R_MAX 8
struct xlx_pic
{
SysBusDevice busdev;
MemoryRegion mmio;
qemu_irq parent_irq;
/* Configuration reg chosen at synthesis-time. QEMU populates
the bits at board-setup. */
uint32_t c_kind_of_intr;
/* Runtime control registers. */
uint32_t regs[R_MAX];
/* state of the interrupt input pins */
uint32_t irq_pin_state;
};
static void update_irq(struct xlx_pic *p)
{
uint32_t i;
/* level triggered interrupt */
if (p->regs[R_MER] & 2) {
p->regs[R_ISR] |= p->irq_pin_state & ~p->c_kind_of_intr;
}
/* Update the pending register. */
p->regs[R_IPR] = p->regs[R_ISR] & p->regs[R_IER];
/* Update the vector register. */
for (i = 0; i < 32; i++) {
if (p->regs[R_IPR] & (1 << i))
break;
}
if (i == 32)
i = ~0;
p->regs[R_IVR] = i;
qemu_set_irq(p->parent_irq, (p->regs[R_MER] & 1) && p->regs[R_IPR]);
}
static uint64_t
pic_read(void *opaque, hwaddr addr, unsigned int size)
{
struct xlx_pic *p = opaque;
uint32_t r = 0;
addr >>= 2;
switch (addr)
{
default:
if (addr < ARRAY_SIZE(p->regs))
r = p->regs[addr];
break;
}
D(printf("%s %x=%x\n", __func__, addr * 4, r));
return r;
}
static void
pic_write(void *opaque, hwaddr addr,
uint64_t val64, unsigned int size)
{
struct xlx_pic *p = opaque;
uint32_t value = val64;
addr >>= 2;
D(qemu_log("%s addr=%x val=%x\n", __func__, addr * 4, value));
switch (addr)
{
case R_IAR:
p->regs[R_ISR] &= ~value; /* ACK. */
break;
case R_SIE:
p->regs[R_IER] |= value; /* Atomic set ie. */
break;
case R_CIE:
p->regs[R_IER] &= ~value; /* Atomic clear ie. */
break;
case R_ISR:
if ((p->regs[R_MER] & 2)) {
break;
}
/* fallthrough */
default:
if (addr < ARRAY_SIZE(p->regs))
p->regs[addr] = value;
break;
}
update_irq(p);
}
static const MemoryRegionOps pic_ops = {
.read = pic_read,
.write = pic_write,
.endianness = DEVICE_NATIVE_ENDIAN,
.valid = {
.min_access_size = 4,
.max_access_size = 4
}
};
static void irq_handler(void *opaque, int irq, int level)
{
struct xlx_pic *p = opaque;
/* edge triggered interrupt */
if (p->c_kind_of_intr & (1 << irq) && p->regs[R_MER] & 2) {
p->regs[R_ISR] |= (level << irq);
}
p->irq_pin_state &= ~(1 << irq);
p->irq_pin_state |= level << irq;
update_irq(p);
}
static int xilinx_intc_init(SysBusDevice *dev)
{
struct xlx_pic *p = FROM_SYSBUS(typeof (*p), dev);
qdev_init_gpio_in(&dev->qdev, irq_handler, 32);
sysbus_init_irq(dev, &p->parent_irq);
memory_region_init_io(&p->mmio, &pic_ops, p, "xlnx.xps-intc", R_MAX * 4);
sysbus_init_mmio(dev, &p->mmio);
return 0;
}
static Property xilinx_intc_properties[] = {
DEFINE_PROP_UINT32("kind-of-intr", struct xlx_pic, c_kind_of_intr, 0),
DEFINE_PROP_END_OF_LIST(),
};
static void xilinx_intc_class_init(ObjectClass *klass, void *data)
{
DeviceClass *dc = DEVICE_CLASS(klass);
SysBusDeviceClass *k = SYS_BUS_DEVICE_CLASS(klass);
k->init = xilinx_intc_init;
dc->props = xilinx_intc_properties;
}
static const TypeInfo xilinx_intc_info = {
.name = "xlnx.xps-intc",
.parent = TYPE_SYS_BUS_DEVICE,
.instance_size = sizeof(struct xlx_pic),
.class_init = xilinx_intc_class_init,
};
static void xilinx_intc_register_types(void)
{
type_register_static(&xilinx_intc_info);
}
type_init(xilinx_intc_register_types)