ae4de14cd3
This adds support for Dynamic DMA Windows (DDW) option defined by the SPAPR specification which allows to have additional DMA window(s) The "ddw" property is enabled by default on a PHB but for compatibility the pseries-2.6 machine and older disable it. This also creates a single DMA window for the older machines to maintain backward migration. This implements DDW for PHB with emulated and VFIO devices. The host kernel support is required. The advertised IOMMU page sizes are 4K and 64K; 16M pages are supported but not advertised by default, in order to enable them, the user has to specify "pgsz" property for PHB and enable huge pages for RAM. The existing linux guests try creating one additional huge DMA window with 64K or 16MB pages and map the entire guest RAM to. If succeeded, the guest switches to dma_direct_ops and never calls TCE hypercalls (H_PUT_TCE,...) again. This enables VFIO devices to use the entire RAM and not waste time on map/unmap later. This adds a "dma64_win_addr" property which is a bus address for the 64bit window and by default set to 0x800.0000.0000.0000 as this is what the modern POWER8 hardware uses and this allows having emulated and VFIO devices on the same bus. This adds 4 RTAS handlers: * ibm,query-pe-dma-window * ibm,create-pe-dma-window * ibm,remove-pe-dma-window * ibm,reset-pe-dma-window These are registered from type_init() callback. These RTAS handlers are implemented in a separate file to avoid polluting spapr_iommu.c with PCI. This changes sPAPRPHBState::dma_liobn to an array to allow 2 LIOBNs and updates all references to dma_liobn. However this does not add 64bit LIOBN to the migration stream as in fact even 32bit LIOBN is rather pointless there (as it is a PHB property and the management software can/should pass LIOBNs via CLI) but we keep it for the backward migration support. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2637 lines
83 KiB
C
2637 lines
83 KiB
C
/*
|
|
* QEMU PowerPC pSeries Logical Partition (aka sPAPR) hardware System Emulator
|
|
*
|
|
* Copyright (c) 2004-2007 Fabrice Bellard
|
|
* Copyright (c) 2007 Jocelyn Mayer
|
|
* Copyright (c) 2010 David Gibson, IBM Corporation.
|
|
*
|
|
* Permission is hereby granted, free of charge, to any person obtaining a copy
|
|
* of this software and associated documentation files (the "Software"), to deal
|
|
* in the Software without restriction, including without limitation the rights
|
|
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
|
|
* copies of the Software, and to permit persons to whom the Software is
|
|
* furnished to do so, subject to the following conditions:
|
|
*
|
|
* The above copyright notice and this permission notice shall be included in
|
|
* all copies or substantial portions of the Software.
|
|
*
|
|
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
|
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
|
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
|
|
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
|
|
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
|
|
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
|
|
* THE SOFTWARE.
|
|
*
|
|
*/
|
|
#include "qemu/osdep.h"
|
|
#include "qapi/error.h"
|
|
#include "sysemu/sysemu.h"
|
|
#include "sysemu/numa.h"
|
|
#include "hw/hw.h"
|
|
#include "qemu/log.h"
|
|
#include "hw/fw-path-provider.h"
|
|
#include "elf.h"
|
|
#include "net/net.h"
|
|
#include "sysemu/device_tree.h"
|
|
#include "sysemu/block-backend.h"
|
|
#include "sysemu/cpus.h"
|
|
#include "sysemu/kvm.h"
|
|
#include "sysemu/device_tree.h"
|
|
#include "kvm_ppc.h"
|
|
#include "migration/migration.h"
|
|
#include "mmu-hash64.h"
|
|
#include "qom/cpu.h"
|
|
|
|
#include "hw/boards.h"
|
|
#include "hw/ppc/ppc.h"
|
|
#include "hw/loader.h"
|
|
|
|
#include "hw/ppc/spapr.h"
|
|
#include "hw/ppc/spapr_vio.h"
|
|
#include "hw/pci-host/spapr.h"
|
|
#include "hw/ppc/xics.h"
|
|
#include "hw/pci/msi.h"
|
|
|
|
#include "hw/pci/pci.h"
|
|
#include "hw/scsi/scsi.h"
|
|
#include "hw/virtio/virtio-scsi.h"
|
|
|
|
#include "exec/address-spaces.h"
|
|
#include "hw/usb.h"
|
|
#include "qemu/config-file.h"
|
|
#include "qemu/error-report.h"
|
|
#include "trace.h"
|
|
#include "hw/nmi.h"
|
|
|
|
#include "hw/compat.h"
|
|
#include "qemu/cutils.h"
|
|
#include "hw/ppc/spapr_cpu_core.h"
|
|
#include "qmp-commands.h"
|
|
|
|
#include <libfdt.h>
|
|
|
|
/* SLOF memory layout:
|
|
*
|
|
* SLOF raw image loaded at 0, copies its romfs right below the flat
|
|
* device-tree, then position SLOF itself 31M below that
|
|
*
|
|
* So we set FW_OVERHEAD to 40MB which should account for all of that
|
|
* and more
|
|
*
|
|
* We load our kernel at 4M, leaving space for SLOF initial image
|
|
*/
|
|
#define FDT_MAX_SIZE 0x100000
|
|
#define RTAS_MAX_SIZE 0x10000
|
|
#define RTAS_MAX_ADDR 0x80000000 /* RTAS must stay below that */
|
|
#define FW_MAX_SIZE 0x400000
|
|
#define FW_FILE_NAME "slof.bin"
|
|
#define FW_OVERHEAD 0x2800000
|
|
#define KERNEL_LOAD_ADDR FW_MAX_SIZE
|
|
|
|
#define MIN_RMA_SLOF 128UL
|
|
|
|
#define PHANDLE_XICP 0x00001111
|
|
|
|
#define HTAB_SIZE(spapr) (1ULL << ((spapr)->htab_shift))
|
|
|
|
static XICSState *try_create_xics(const char *type, int nr_servers,
|
|
int nr_irqs, Error **errp)
|
|
{
|
|
Error *err = NULL;
|
|
DeviceState *dev;
|
|
|
|
dev = qdev_create(NULL, type);
|
|
qdev_prop_set_uint32(dev, "nr_servers", nr_servers);
|
|
qdev_prop_set_uint32(dev, "nr_irqs", nr_irqs);
|
|
object_property_set_bool(OBJECT(dev), true, "realized", &err);
|
|
if (err) {
|
|
error_propagate(errp, err);
|
|
object_unparent(OBJECT(dev));
|
|
return NULL;
|
|
}
|
|
return XICS_COMMON(dev);
|
|
}
|
|
|
|
static XICSState *xics_system_init(MachineState *machine,
|
|
int nr_servers, int nr_irqs, Error **errp)
|
|
{
|
|
XICSState *xics = NULL;
|
|
|
|
if (kvm_enabled()) {
|
|
Error *err = NULL;
|
|
|
|
if (machine_kernel_irqchip_allowed(machine)) {
|
|
xics = try_create_xics(TYPE_XICS_SPAPR_KVM, nr_servers, nr_irqs,
|
|
&err);
|
|
}
|
|
if (machine_kernel_irqchip_required(machine) && !xics) {
|
|
error_reportf_err(err,
|
|
"kernel_irqchip requested but unavailable: ");
|
|
} else {
|
|
error_free(err);
|
|
}
|
|
}
|
|
|
|
if (!xics) {
|
|
xics = try_create_xics(TYPE_XICS_SPAPR, nr_servers, nr_irqs, errp);
|
|
}
|
|
|
|
return xics;
|
|
}
|
|
|
|
static int spapr_fixup_cpu_smt_dt(void *fdt, int offset, PowerPCCPU *cpu,
|
|
int smt_threads)
|
|
{
|
|
int i, ret = 0;
|
|
uint32_t servers_prop[smt_threads];
|
|
uint32_t gservers_prop[smt_threads * 2];
|
|
int index = ppc_get_vcpu_dt_id(cpu);
|
|
|
|
if (cpu->cpu_version) {
|
|
ret = fdt_setprop_cell(fdt, offset, "cpu-version", cpu->cpu_version);
|
|
if (ret < 0) {
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
/* Build interrupt servers and gservers properties */
|
|
for (i = 0; i < smt_threads; i++) {
|
|
servers_prop[i] = cpu_to_be32(index + i);
|
|
/* Hack, direct the group queues back to cpu 0 */
|
|
gservers_prop[i*2] = cpu_to_be32(index + i);
|
|
gservers_prop[i*2 + 1] = 0;
|
|
}
|
|
ret = fdt_setprop(fdt, offset, "ibm,ppc-interrupt-server#s",
|
|
servers_prop, sizeof(servers_prop));
|
|
if (ret < 0) {
|
|
return ret;
|
|
}
|
|
ret = fdt_setprop(fdt, offset, "ibm,ppc-interrupt-gserver#s",
|
|
gservers_prop, sizeof(gservers_prop));
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int spapr_fixup_cpu_numa_dt(void *fdt, int offset, CPUState *cs)
|
|
{
|
|
int ret = 0;
|
|
PowerPCCPU *cpu = POWERPC_CPU(cs);
|
|
int index = ppc_get_vcpu_dt_id(cpu);
|
|
uint32_t associativity[] = {cpu_to_be32(0x5),
|
|
cpu_to_be32(0x0),
|
|
cpu_to_be32(0x0),
|
|
cpu_to_be32(0x0),
|
|
cpu_to_be32(cs->numa_node),
|
|
cpu_to_be32(index)};
|
|
|
|
/* Advertise NUMA via ibm,associativity */
|
|
if (nb_numa_nodes > 1) {
|
|
ret = fdt_setprop(fdt, offset, "ibm,associativity", associativity,
|
|
sizeof(associativity));
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int spapr_fixup_cpu_dt(void *fdt, sPAPRMachineState *spapr)
|
|
{
|
|
int ret = 0, offset, cpus_offset;
|
|
CPUState *cs;
|
|
char cpu_model[32];
|
|
int smt = kvmppc_smt_threads();
|
|
uint32_t pft_size_prop[] = {0, cpu_to_be32(spapr->htab_shift)};
|
|
|
|
CPU_FOREACH(cs) {
|
|
PowerPCCPU *cpu = POWERPC_CPU(cs);
|
|
DeviceClass *dc = DEVICE_GET_CLASS(cs);
|
|
int index = ppc_get_vcpu_dt_id(cpu);
|
|
|
|
if ((index % smt) != 0) {
|
|
continue;
|
|
}
|
|
|
|
snprintf(cpu_model, 32, "%s@%x", dc->fw_name, index);
|
|
|
|
cpus_offset = fdt_path_offset(fdt, "/cpus");
|
|
if (cpus_offset < 0) {
|
|
cpus_offset = fdt_add_subnode(fdt, fdt_path_offset(fdt, "/"),
|
|
"cpus");
|
|
if (cpus_offset < 0) {
|
|
return cpus_offset;
|
|
}
|
|
}
|
|
offset = fdt_subnode_offset(fdt, cpus_offset, cpu_model);
|
|
if (offset < 0) {
|
|
offset = fdt_add_subnode(fdt, cpus_offset, cpu_model);
|
|
if (offset < 0) {
|
|
return offset;
|
|
}
|
|
}
|
|
|
|
ret = fdt_setprop(fdt, offset, "ibm,pft-size",
|
|
pft_size_prop, sizeof(pft_size_prop));
|
|
if (ret < 0) {
|
|
return ret;
|
|
}
|
|
|
|
ret = spapr_fixup_cpu_numa_dt(fdt, offset, cs);
|
|
if (ret < 0) {
|
|
return ret;
|
|
}
|
|
|
|
ret = spapr_fixup_cpu_smt_dt(fdt, offset, cpu,
|
|
ppc_get_compat_smt_threads(cpu));
|
|
if (ret < 0) {
|
|
return ret;
|
|
}
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
|
|
static size_t create_page_sizes_prop(CPUPPCState *env, uint32_t *prop,
|
|
size_t maxsize)
|
|
{
|
|
size_t maxcells = maxsize / sizeof(uint32_t);
|
|
int i, j, count;
|
|
uint32_t *p = prop;
|
|
|
|
for (i = 0; i < PPC_PAGE_SIZES_MAX_SZ; i++) {
|
|
struct ppc_one_seg_page_size *sps = &env->sps.sps[i];
|
|
|
|
if (!sps->page_shift) {
|
|
break;
|
|
}
|
|
for (count = 0; count < PPC_PAGE_SIZES_MAX_SZ; count++) {
|
|
if (sps->enc[count].page_shift == 0) {
|
|
break;
|
|
}
|
|
}
|
|
if ((p - prop) >= (maxcells - 3 - count * 2)) {
|
|
break;
|
|
}
|
|
*(p++) = cpu_to_be32(sps->page_shift);
|
|
*(p++) = cpu_to_be32(sps->slb_enc);
|
|
*(p++) = cpu_to_be32(count);
|
|
for (j = 0; j < count; j++) {
|
|
*(p++) = cpu_to_be32(sps->enc[j].page_shift);
|
|
*(p++) = cpu_to_be32(sps->enc[j].pte_enc);
|
|
}
|
|
}
|
|
|
|
return (p - prop) * sizeof(uint32_t);
|
|
}
|
|
|
|
static hwaddr spapr_node0_size(void)
|
|
{
|
|
MachineState *machine = MACHINE(qdev_get_machine());
|
|
|
|
if (nb_numa_nodes) {
|
|
int i;
|
|
for (i = 0; i < nb_numa_nodes; ++i) {
|
|
if (numa_info[i].node_mem) {
|
|
return MIN(pow2floor(numa_info[i].node_mem),
|
|
machine->ram_size);
|
|
}
|
|
}
|
|
}
|
|
return machine->ram_size;
|
|
}
|
|
|
|
#define _FDT(exp) \
|
|
do { \
|
|
int ret = (exp); \
|
|
if (ret < 0) { \
|
|
fprintf(stderr, "qemu: error creating device tree: %s: %s\n", \
|
|
#exp, fdt_strerror(ret)); \
|
|
exit(1); \
|
|
} \
|
|
} while (0)
|
|
|
|
static void add_str(GString *s, const gchar *s1)
|
|
{
|
|
g_string_append_len(s, s1, strlen(s1) + 1);
|
|
}
|
|
|
|
static void *spapr_create_fdt_skel(hwaddr initrd_base,
|
|
hwaddr initrd_size,
|
|
hwaddr kernel_size,
|
|
bool little_endian,
|
|
const char *kernel_cmdline,
|
|
uint32_t epow_irq)
|
|
{
|
|
void *fdt;
|
|
uint32_t start_prop = cpu_to_be32(initrd_base);
|
|
uint32_t end_prop = cpu_to_be32(initrd_base + initrd_size);
|
|
GString *hypertas = g_string_sized_new(256);
|
|
GString *qemu_hypertas = g_string_sized_new(256);
|
|
uint32_t refpoints[] = {cpu_to_be32(0x4), cpu_to_be32(0x4)};
|
|
uint32_t interrupt_server_ranges_prop[] = {0, cpu_to_be32(max_cpus)};
|
|
unsigned char vec5[] = {0x0, 0x0, 0x0, 0x0, 0x0, 0x80};
|
|
char *buf;
|
|
|
|
add_str(hypertas, "hcall-pft");
|
|
add_str(hypertas, "hcall-term");
|
|
add_str(hypertas, "hcall-dabr");
|
|
add_str(hypertas, "hcall-interrupt");
|
|
add_str(hypertas, "hcall-tce");
|
|
add_str(hypertas, "hcall-vio");
|
|
add_str(hypertas, "hcall-splpar");
|
|
add_str(hypertas, "hcall-bulk");
|
|
add_str(hypertas, "hcall-set-mode");
|
|
add_str(hypertas, "hcall-sprg0");
|
|
add_str(hypertas, "hcall-copy");
|
|
add_str(hypertas, "hcall-debug");
|
|
add_str(qemu_hypertas, "hcall-memop1");
|
|
|
|
fdt = g_malloc0(FDT_MAX_SIZE);
|
|
_FDT((fdt_create(fdt, FDT_MAX_SIZE)));
|
|
|
|
if (kernel_size) {
|
|
_FDT((fdt_add_reservemap_entry(fdt, KERNEL_LOAD_ADDR, kernel_size)));
|
|
}
|
|
if (initrd_size) {
|
|
_FDT((fdt_add_reservemap_entry(fdt, initrd_base, initrd_size)));
|
|
}
|
|
_FDT((fdt_finish_reservemap(fdt)));
|
|
|
|
/* Root node */
|
|
_FDT((fdt_begin_node(fdt, "")));
|
|
_FDT((fdt_property_string(fdt, "device_type", "chrp")));
|
|
_FDT((fdt_property_string(fdt, "model", "IBM pSeries (emulated by qemu)")));
|
|
_FDT((fdt_property_string(fdt, "compatible", "qemu,pseries")));
|
|
|
|
/*
|
|
* Add info to guest to indentify which host is it being run on
|
|
* and what is the uuid of the guest
|
|
*/
|
|
if (kvmppc_get_host_model(&buf)) {
|
|
_FDT((fdt_property_string(fdt, "host-model", buf)));
|
|
g_free(buf);
|
|
}
|
|
if (kvmppc_get_host_serial(&buf)) {
|
|
_FDT((fdt_property_string(fdt, "host-serial", buf)));
|
|
g_free(buf);
|
|
}
|
|
|
|
buf = g_strdup_printf(UUID_FMT, qemu_uuid[0], qemu_uuid[1],
|
|
qemu_uuid[2], qemu_uuid[3], qemu_uuid[4],
|
|
qemu_uuid[5], qemu_uuid[6], qemu_uuid[7],
|
|
qemu_uuid[8], qemu_uuid[9], qemu_uuid[10],
|
|
qemu_uuid[11], qemu_uuid[12], qemu_uuid[13],
|
|
qemu_uuid[14], qemu_uuid[15]);
|
|
|
|
_FDT((fdt_property_string(fdt, "vm,uuid", buf)));
|
|
if (qemu_uuid_set) {
|
|
_FDT((fdt_property_string(fdt, "system-id", buf)));
|
|
}
|
|
g_free(buf);
|
|
|
|
if (qemu_get_vm_name()) {
|
|
_FDT((fdt_property_string(fdt, "ibm,partition-name",
|
|
qemu_get_vm_name())));
|
|
}
|
|
|
|
_FDT((fdt_property_cell(fdt, "#address-cells", 0x2)));
|
|
_FDT((fdt_property_cell(fdt, "#size-cells", 0x2)));
|
|
|
|
/* /chosen */
|
|
_FDT((fdt_begin_node(fdt, "chosen")));
|
|
|
|
/* Set Form1_affinity */
|
|
_FDT((fdt_property(fdt, "ibm,architecture-vec-5", vec5, sizeof(vec5))));
|
|
|
|
_FDT((fdt_property_string(fdt, "bootargs", kernel_cmdline)));
|
|
_FDT((fdt_property(fdt, "linux,initrd-start",
|
|
&start_prop, sizeof(start_prop))));
|
|
_FDT((fdt_property(fdt, "linux,initrd-end",
|
|
&end_prop, sizeof(end_prop))));
|
|
if (kernel_size) {
|
|
uint64_t kprop[2] = { cpu_to_be64(KERNEL_LOAD_ADDR),
|
|
cpu_to_be64(kernel_size) };
|
|
|
|
_FDT((fdt_property(fdt, "qemu,boot-kernel", &kprop, sizeof(kprop))));
|
|
if (little_endian) {
|
|
_FDT((fdt_property(fdt, "qemu,boot-kernel-le", NULL, 0)));
|
|
}
|
|
}
|
|
if (boot_menu) {
|
|
_FDT((fdt_property_cell(fdt, "qemu,boot-menu", boot_menu)));
|
|
}
|
|
_FDT((fdt_property_cell(fdt, "qemu,graphic-width", graphic_width)));
|
|
_FDT((fdt_property_cell(fdt, "qemu,graphic-height", graphic_height)));
|
|
_FDT((fdt_property_cell(fdt, "qemu,graphic-depth", graphic_depth)));
|
|
|
|
_FDT((fdt_end_node(fdt)));
|
|
|
|
/* RTAS */
|
|
_FDT((fdt_begin_node(fdt, "rtas")));
|
|
|
|
if (!kvm_enabled() || kvmppc_spapr_use_multitce()) {
|
|
add_str(hypertas, "hcall-multi-tce");
|
|
}
|
|
_FDT((fdt_property(fdt, "ibm,hypertas-functions", hypertas->str,
|
|
hypertas->len)));
|
|
g_string_free(hypertas, TRUE);
|
|
_FDT((fdt_property(fdt, "qemu,hypertas-functions", qemu_hypertas->str,
|
|
qemu_hypertas->len)));
|
|
g_string_free(qemu_hypertas, TRUE);
|
|
|
|
_FDT((fdt_property(fdt, "ibm,associativity-reference-points",
|
|
refpoints, sizeof(refpoints))));
|
|
|
|
_FDT((fdt_property_cell(fdt, "rtas-error-log-max", RTAS_ERROR_LOG_MAX)));
|
|
_FDT((fdt_property_cell(fdt, "rtas-event-scan-rate",
|
|
RTAS_EVENT_SCAN_RATE)));
|
|
|
|
if (msi_nonbroken) {
|
|
_FDT((fdt_property(fdt, "ibm,change-msix-capable", NULL, 0)));
|
|
}
|
|
|
|
/*
|
|
* According to PAPR, rtas ibm,os-term does not guarantee a return
|
|
* back to the guest cpu.
|
|
*
|
|
* While an additional ibm,extended-os-term property indicates that
|
|
* rtas call return will always occur. Set this property.
|
|
*/
|
|
_FDT((fdt_property(fdt, "ibm,extended-os-term", NULL, 0)));
|
|
|
|
_FDT((fdt_end_node(fdt)));
|
|
|
|
/* interrupt controller */
|
|
_FDT((fdt_begin_node(fdt, "interrupt-controller")));
|
|
|
|
_FDT((fdt_property_string(fdt, "device_type",
|
|
"PowerPC-External-Interrupt-Presentation")));
|
|
_FDT((fdt_property_string(fdt, "compatible", "IBM,ppc-xicp")));
|
|
_FDT((fdt_property(fdt, "interrupt-controller", NULL, 0)));
|
|
_FDT((fdt_property(fdt, "ibm,interrupt-server-ranges",
|
|
interrupt_server_ranges_prop,
|
|
sizeof(interrupt_server_ranges_prop))));
|
|
_FDT((fdt_property_cell(fdt, "#interrupt-cells", 2)));
|
|
_FDT((fdt_property_cell(fdt, "linux,phandle", PHANDLE_XICP)));
|
|
_FDT((fdt_property_cell(fdt, "phandle", PHANDLE_XICP)));
|
|
|
|
_FDT((fdt_end_node(fdt)));
|
|
|
|
/* vdevice */
|
|
_FDT((fdt_begin_node(fdt, "vdevice")));
|
|
|
|
_FDT((fdt_property_string(fdt, "device_type", "vdevice")));
|
|
_FDT((fdt_property_string(fdt, "compatible", "IBM,vdevice")));
|
|
_FDT((fdt_property_cell(fdt, "#address-cells", 0x1)));
|
|
_FDT((fdt_property_cell(fdt, "#size-cells", 0x0)));
|
|
_FDT((fdt_property_cell(fdt, "#interrupt-cells", 0x2)));
|
|
_FDT((fdt_property(fdt, "interrupt-controller", NULL, 0)));
|
|
|
|
_FDT((fdt_end_node(fdt)));
|
|
|
|
/* event-sources */
|
|
spapr_events_fdt_skel(fdt, epow_irq);
|
|
|
|
/* /hypervisor node */
|
|
if (kvm_enabled()) {
|
|
uint8_t hypercall[16];
|
|
|
|
/* indicate KVM hypercall interface */
|
|
_FDT((fdt_begin_node(fdt, "hypervisor")));
|
|
_FDT((fdt_property_string(fdt, "compatible", "linux,kvm")));
|
|
if (kvmppc_has_cap_fixup_hcalls()) {
|
|
/*
|
|
* Older KVM versions with older guest kernels were broken with the
|
|
* magic page, don't allow the guest to map it.
|
|
*/
|
|
if (!kvmppc_get_hypercall(first_cpu->env_ptr, hypercall,
|
|
sizeof(hypercall))) {
|
|
_FDT((fdt_property(fdt, "hcall-instructions", hypercall,
|
|
sizeof(hypercall))));
|
|
}
|
|
}
|
|
_FDT((fdt_end_node(fdt)));
|
|
}
|
|
|
|
_FDT((fdt_end_node(fdt))); /* close root node */
|
|
_FDT((fdt_finish(fdt)));
|
|
|
|
return fdt;
|
|
}
|
|
|
|
static int spapr_populate_memory_node(void *fdt, int nodeid, hwaddr start,
|
|
hwaddr size)
|
|
{
|
|
uint32_t associativity[] = {
|
|
cpu_to_be32(0x4), /* length */
|
|
cpu_to_be32(0x0), cpu_to_be32(0x0),
|
|
cpu_to_be32(0x0), cpu_to_be32(nodeid)
|
|
};
|
|
char mem_name[32];
|
|
uint64_t mem_reg_property[2];
|
|
int off;
|
|
|
|
mem_reg_property[0] = cpu_to_be64(start);
|
|
mem_reg_property[1] = cpu_to_be64(size);
|
|
|
|
sprintf(mem_name, "memory@" TARGET_FMT_lx, start);
|
|
off = fdt_add_subnode(fdt, 0, mem_name);
|
|
_FDT(off);
|
|
_FDT((fdt_setprop_string(fdt, off, "device_type", "memory")));
|
|
_FDT((fdt_setprop(fdt, off, "reg", mem_reg_property,
|
|
sizeof(mem_reg_property))));
|
|
_FDT((fdt_setprop(fdt, off, "ibm,associativity", associativity,
|
|
sizeof(associativity))));
|
|
return off;
|
|
}
|
|
|
|
static int spapr_populate_memory(sPAPRMachineState *spapr, void *fdt)
|
|
{
|
|
MachineState *machine = MACHINE(spapr);
|
|
hwaddr mem_start, node_size;
|
|
int i, nb_nodes = nb_numa_nodes;
|
|
NodeInfo *nodes = numa_info;
|
|
NodeInfo ramnode;
|
|
|
|
/* No NUMA nodes, assume there is just one node with whole RAM */
|
|
if (!nb_numa_nodes) {
|
|
nb_nodes = 1;
|
|
ramnode.node_mem = machine->ram_size;
|
|
nodes = &ramnode;
|
|
}
|
|
|
|
for (i = 0, mem_start = 0; i < nb_nodes; ++i) {
|
|
if (!nodes[i].node_mem) {
|
|
continue;
|
|
}
|
|
if (mem_start >= machine->ram_size) {
|
|
node_size = 0;
|
|
} else {
|
|
node_size = nodes[i].node_mem;
|
|
if (node_size > machine->ram_size - mem_start) {
|
|
node_size = machine->ram_size - mem_start;
|
|
}
|
|
}
|
|
if (!mem_start) {
|
|
/* ppc_spapr_init() checks for rma_size <= node0_size already */
|
|
spapr_populate_memory_node(fdt, i, 0, spapr->rma_size);
|
|
mem_start += spapr->rma_size;
|
|
node_size -= spapr->rma_size;
|
|
}
|
|
for ( ; node_size; ) {
|
|
hwaddr sizetmp = pow2floor(node_size);
|
|
|
|
/* mem_start != 0 here */
|
|
if (ctzl(mem_start) < ctzl(sizetmp)) {
|
|
sizetmp = 1ULL << ctzl(mem_start);
|
|
}
|
|
|
|
spapr_populate_memory_node(fdt, i, mem_start, sizetmp);
|
|
node_size -= sizetmp;
|
|
mem_start += sizetmp;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void spapr_populate_cpu_dt(CPUState *cs, void *fdt, int offset,
|
|
sPAPRMachineState *spapr)
|
|
{
|
|
PowerPCCPU *cpu = POWERPC_CPU(cs);
|
|
CPUPPCState *env = &cpu->env;
|
|
PowerPCCPUClass *pcc = POWERPC_CPU_GET_CLASS(cs);
|
|
int index = ppc_get_vcpu_dt_id(cpu);
|
|
uint32_t segs[] = {cpu_to_be32(28), cpu_to_be32(40),
|
|
0xffffffff, 0xffffffff};
|
|
uint32_t tbfreq = kvm_enabled() ? kvmppc_get_tbfreq()
|
|
: SPAPR_TIMEBASE_FREQ;
|
|
uint32_t cpufreq = kvm_enabled() ? kvmppc_get_clockfreq() : 1000000000;
|
|
uint32_t page_sizes_prop[64];
|
|
size_t page_sizes_prop_size;
|
|
uint32_t vcpus_per_socket = smp_threads * smp_cores;
|
|
uint32_t pft_size_prop[] = {0, cpu_to_be32(spapr->htab_shift)};
|
|
sPAPRDRConnector *drc;
|
|
sPAPRDRConnectorClass *drck;
|
|
int drc_index;
|
|
|
|
drc = spapr_dr_connector_by_id(SPAPR_DR_CONNECTOR_TYPE_CPU, index);
|
|
if (drc) {
|
|
drck = SPAPR_DR_CONNECTOR_GET_CLASS(drc);
|
|
drc_index = drck->get_index(drc);
|
|
_FDT((fdt_setprop_cell(fdt, offset, "ibm,my-drc-index", drc_index)));
|
|
}
|
|
|
|
/* Note: we keep CI large pages off for now because a 64K capable guest
|
|
* provisioned with large pages might otherwise try to map a qemu
|
|
* framebuffer (or other kind of memory mapped PCI BAR) using 64K pages
|
|
* even if that qemu runs on a 4k host.
|
|
*
|
|
* We can later add this bit back when we are confident this is not
|
|
* an issue (!HV KVM or 64K host)
|
|
*/
|
|
uint8_t pa_features_206[] = { 6, 0,
|
|
0xf6, 0x1f, 0xc7, 0x00, 0x80, 0xc0 };
|
|
uint8_t pa_features_207[] = { 24, 0,
|
|
0xf6, 0x1f, 0xc7, 0xc0, 0x80, 0xf0,
|
|
0x80, 0x00, 0x00, 0x00, 0x00, 0x00,
|
|
0x00, 0x00, 0x00, 0x00, 0x80, 0x00,
|
|
0x80, 0x00, 0x80, 0x00, 0x80, 0x00 };
|
|
uint8_t *pa_features;
|
|
size_t pa_size;
|
|
|
|
_FDT((fdt_setprop_cell(fdt, offset, "reg", index)));
|
|
_FDT((fdt_setprop_string(fdt, offset, "device_type", "cpu")));
|
|
|
|
_FDT((fdt_setprop_cell(fdt, offset, "cpu-version", env->spr[SPR_PVR])));
|
|
_FDT((fdt_setprop_cell(fdt, offset, "d-cache-block-size",
|
|
env->dcache_line_size)));
|
|
_FDT((fdt_setprop_cell(fdt, offset, "d-cache-line-size",
|
|
env->dcache_line_size)));
|
|
_FDT((fdt_setprop_cell(fdt, offset, "i-cache-block-size",
|
|
env->icache_line_size)));
|
|
_FDT((fdt_setprop_cell(fdt, offset, "i-cache-line-size",
|
|
env->icache_line_size)));
|
|
|
|
if (pcc->l1_dcache_size) {
|
|
_FDT((fdt_setprop_cell(fdt, offset, "d-cache-size",
|
|
pcc->l1_dcache_size)));
|
|
} else {
|
|
fprintf(stderr, "Warning: Unknown L1 dcache size for cpu\n");
|
|
}
|
|
if (pcc->l1_icache_size) {
|
|
_FDT((fdt_setprop_cell(fdt, offset, "i-cache-size",
|
|
pcc->l1_icache_size)));
|
|
} else {
|
|
fprintf(stderr, "Warning: Unknown L1 icache size for cpu\n");
|
|
}
|
|
|
|
_FDT((fdt_setprop_cell(fdt, offset, "timebase-frequency", tbfreq)));
|
|
_FDT((fdt_setprop_cell(fdt, offset, "clock-frequency", cpufreq)));
|
|
_FDT((fdt_setprop_cell(fdt, offset, "slb-size", env->slb_nr)));
|
|
_FDT((fdt_setprop_cell(fdt, offset, "ibm,slb-size", env->slb_nr)));
|
|
_FDT((fdt_setprop_string(fdt, offset, "status", "okay")));
|
|
_FDT((fdt_setprop(fdt, offset, "64-bit", NULL, 0)));
|
|
|
|
if (env->spr_cb[SPR_PURR].oea_read) {
|
|
_FDT((fdt_setprop(fdt, offset, "ibm,purr", NULL, 0)));
|
|
}
|
|
|
|
if (env->mmu_model & POWERPC_MMU_1TSEG) {
|
|
_FDT((fdt_setprop(fdt, offset, "ibm,processor-segment-sizes",
|
|
segs, sizeof(segs))));
|
|
}
|
|
|
|
/* Advertise VMX/VSX (vector extensions) if available
|
|
* 0 / no property == no vector extensions
|
|
* 1 == VMX / Altivec available
|
|
* 2 == VSX available */
|
|
if (env->insns_flags & PPC_ALTIVEC) {
|
|
uint32_t vmx = (env->insns_flags2 & PPC2_VSX) ? 2 : 1;
|
|
|
|
_FDT((fdt_setprop_cell(fdt, offset, "ibm,vmx", vmx)));
|
|
}
|
|
|
|
/* Advertise DFP (Decimal Floating Point) if available
|
|
* 0 / no property == no DFP
|
|
* 1 == DFP available */
|
|
if (env->insns_flags2 & PPC2_DFP) {
|
|
_FDT((fdt_setprop_cell(fdt, offset, "ibm,dfp", 1)));
|
|
}
|
|
|
|
page_sizes_prop_size = create_page_sizes_prop(env, page_sizes_prop,
|
|
sizeof(page_sizes_prop));
|
|
if (page_sizes_prop_size) {
|
|
_FDT((fdt_setprop(fdt, offset, "ibm,segment-page-sizes",
|
|
page_sizes_prop, page_sizes_prop_size)));
|
|
}
|
|
|
|
/* Do the ibm,pa-features property, adjust it for ci-large-pages */
|
|
if (env->mmu_model == POWERPC_MMU_2_06) {
|
|
pa_features = pa_features_206;
|
|
pa_size = sizeof(pa_features_206);
|
|
} else /* env->mmu_model == POWERPC_MMU_2_07 */ {
|
|
pa_features = pa_features_207;
|
|
pa_size = sizeof(pa_features_207);
|
|
}
|
|
if (env->ci_large_pages) {
|
|
pa_features[3] |= 0x20;
|
|
}
|
|
_FDT((fdt_setprop(fdt, offset, "ibm,pa-features", pa_features, pa_size)));
|
|
|
|
_FDT((fdt_setprop_cell(fdt, offset, "ibm,chip-id",
|
|
cs->cpu_index / vcpus_per_socket)));
|
|
|
|
_FDT((fdt_setprop(fdt, offset, "ibm,pft-size",
|
|
pft_size_prop, sizeof(pft_size_prop))));
|
|
|
|
_FDT(spapr_fixup_cpu_numa_dt(fdt, offset, cs));
|
|
|
|
_FDT(spapr_fixup_cpu_smt_dt(fdt, offset, cpu,
|
|
ppc_get_compat_smt_threads(cpu)));
|
|
}
|
|
|
|
static void spapr_populate_cpus_dt_node(void *fdt, sPAPRMachineState *spapr)
|
|
{
|
|
CPUState *cs;
|
|
int cpus_offset;
|
|
char *nodename;
|
|
int smt = kvmppc_smt_threads();
|
|
|
|
cpus_offset = fdt_add_subnode(fdt, 0, "cpus");
|
|
_FDT(cpus_offset);
|
|
_FDT((fdt_setprop_cell(fdt, cpus_offset, "#address-cells", 0x1)));
|
|
_FDT((fdt_setprop_cell(fdt, cpus_offset, "#size-cells", 0x0)));
|
|
|
|
/*
|
|
* We walk the CPUs in reverse order to ensure that CPU DT nodes
|
|
* created by fdt_add_subnode() end up in the right order in FDT
|
|
* for the guest kernel the enumerate the CPUs correctly.
|
|
*/
|
|
CPU_FOREACH_REVERSE(cs) {
|
|
PowerPCCPU *cpu = POWERPC_CPU(cs);
|
|
int index = ppc_get_vcpu_dt_id(cpu);
|
|
DeviceClass *dc = DEVICE_GET_CLASS(cs);
|
|
int offset;
|
|
|
|
if ((index % smt) != 0) {
|
|
continue;
|
|
}
|
|
|
|
nodename = g_strdup_printf("%s@%x", dc->fw_name, index);
|
|
offset = fdt_add_subnode(fdt, cpus_offset, nodename);
|
|
g_free(nodename);
|
|
_FDT(offset);
|
|
spapr_populate_cpu_dt(cs, fdt, offset, spapr);
|
|
}
|
|
|
|
}
|
|
|
|
/*
|
|
* Adds ibm,dynamic-reconfiguration-memory node.
|
|
* Refer to docs/specs/ppc-spapr-hotplug.txt for the documentation
|
|
* of this device tree node.
|
|
*/
|
|
static int spapr_populate_drconf_memory(sPAPRMachineState *spapr, void *fdt)
|
|
{
|
|
MachineState *machine = MACHINE(spapr);
|
|
int ret, i, offset;
|
|
uint64_t lmb_size = SPAPR_MEMORY_BLOCK_SIZE;
|
|
uint32_t prop_lmb_size[] = {0, cpu_to_be32(lmb_size)};
|
|
uint32_t hotplug_lmb_start = spapr->hotplug_memory.base / lmb_size;
|
|
uint32_t nr_lmbs = (spapr->hotplug_memory.base +
|
|
memory_region_size(&spapr->hotplug_memory.mr)) /
|
|
lmb_size;
|
|
uint32_t *int_buf, *cur_index, buf_len;
|
|
int nr_nodes = nb_numa_nodes ? nb_numa_nodes : 1;
|
|
|
|
/*
|
|
* Don't create the node if there is no hotpluggable memory
|
|
*/
|
|
if (machine->ram_size == machine->maxram_size) {
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Allocate enough buffer size to fit in ibm,dynamic-memory
|
|
* or ibm,associativity-lookup-arrays
|
|
*/
|
|
buf_len = MAX(nr_lmbs * SPAPR_DR_LMB_LIST_ENTRY_SIZE + 1, nr_nodes * 4 + 2)
|
|
* sizeof(uint32_t);
|
|
cur_index = int_buf = g_malloc0(buf_len);
|
|
|
|
offset = fdt_add_subnode(fdt, 0, "ibm,dynamic-reconfiguration-memory");
|
|
|
|
ret = fdt_setprop(fdt, offset, "ibm,lmb-size", prop_lmb_size,
|
|
sizeof(prop_lmb_size));
|
|
if (ret < 0) {
|
|
goto out;
|
|
}
|
|
|
|
ret = fdt_setprop_cell(fdt, offset, "ibm,memory-flags-mask", 0xff);
|
|
if (ret < 0) {
|
|
goto out;
|
|
}
|
|
|
|
ret = fdt_setprop_cell(fdt, offset, "ibm,memory-preservation-time", 0x0);
|
|
if (ret < 0) {
|
|
goto out;
|
|
}
|
|
|
|
/* ibm,dynamic-memory */
|
|
int_buf[0] = cpu_to_be32(nr_lmbs);
|
|
cur_index++;
|
|
for (i = 0; i < nr_lmbs; i++) {
|
|
uint64_t addr = i * lmb_size;
|
|
uint32_t *dynamic_memory = cur_index;
|
|
|
|
if (i >= hotplug_lmb_start) {
|
|
sPAPRDRConnector *drc;
|
|
sPAPRDRConnectorClass *drck;
|
|
|
|
drc = spapr_dr_connector_by_id(SPAPR_DR_CONNECTOR_TYPE_LMB, i);
|
|
g_assert(drc);
|
|
drck = SPAPR_DR_CONNECTOR_GET_CLASS(drc);
|
|
|
|
dynamic_memory[0] = cpu_to_be32(addr >> 32);
|
|
dynamic_memory[1] = cpu_to_be32(addr & 0xffffffff);
|
|
dynamic_memory[2] = cpu_to_be32(drck->get_index(drc));
|
|
dynamic_memory[3] = cpu_to_be32(0); /* reserved */
|
|
dynamic_memory[4] = cpu_to_be32(numa_get_node(addr, NULL));
|
|
if (memory_region_present(get_system_memory(), addr)) {
|
|
dynamic_memory[5] = cpu_to_be32(SPAPR_LMB_FLAGS_ASSIGNED);
|
|
} else {
|
|
dynamic_memory[5] = cpu_to_be32(0);
|
|
}
|
|
} else {
|
|
/*
|
|
* LMB information for RMA, boot time RAM and gap b/n RAM and
|
|
* hotplug memory region -- all these are marked as reserved
|
|
* and as having no valid DRC.
|
|
*/
|
|
dynamic_memory[0] = cpu_to_be32(addr >> 32);
|
|
dynamic_memory[1] = cpu_to_be32(addr & 0xffffffff);
|
|
dynamic_memory[2] = cpu_to_be32(0);
|
|
dynamic_memory[3] = cpu_to_be32(0); /* reserved */
|
|
dynamic_memory[4] = cpu_to_be32(-1);
|
|
dynamic_memory[5] = cpu_to_be32(SPAPR_LMB_FLAGS_RESERVED |
|
|
SPAPR_LMB_FLAGS_DRC_INVALID);
|
|
}
|
|
|
|
cur_index += SPAPR_DR_LMB_LIST_ENTRY_SIZE;
|
|
}
|
|
ret = fdt_setprop(fdt, offset, "ibm,dynamic-memory", int_buf, buf_len);
|
|
if (ret < 0) {
|
|
goto out;
|
|
}
|
|
|
|
/* ibm,associativity-lookup-arrays */
|
|
cur_index = int_buf;
|
|
int_buf[0] = cpu_to_be32(nr_nodes);
|
|
int_buf[1] = cpu_to_be32(4); /* Number of entries per associativity list */
|
|
cur_index += 2;
|
|
for (i = 0; i < nr_nodes; i++) {
|
|
uint32_t associativity[] = {
|
|
cpu_to_be32(0x0),
|
|
cpu_to_be32(0x0),
|
|
cpu_to_be32(0x0),
|
|
cpu_to_be32(i)
|
|
};
|
|
memcpy(cur_index, associativity, sizeof(associativity));
|
|
cur_index += 4;
|
|
}
|
|
ret = fdt_setprop(fdt, offset, "ibm,associativity-lookup-arrays", int_buf,
|
|
(cur_index - int_buf) * sizeof(uint32_t));
|
|
out:
|
|
g_free(int_buf);
|
|
return ret;
|
|
}
|
|
|
|
int spapr_h_cas_compose_response(sPAPRMachineState *spapr,
|
|
target_ulong addr, target_ulong size,
|
|
bool cpu_update, bool memory_update)
|
|
{
|
|
void *fdt, *fdt_skel;
|
|
sPAPRDeviceTreeUpdateHeader hdr = { .version_id = 1 };
|
|
sPAPRMachineClass *smc = SPAPR_MACHINE_GET_CLASS(qdev_get_machine());
|
|
|
|
size -= sizeof(hdr);
|
|
|
|
/* Create sceleton */
|
|
fdt_skel = g_malloc0(size);
|
|
_FDT((fdt_create(fdt_skel, size)));
|
|
_FDT((fdt_begin_node(fdt_skel, "")));
|
|
_FDT((fdt_end_node(fdt_skel)));
|
|
_FDT((fdt_finish(fdt_skel)));
|
|
fdt = g_malloc0(size);
|
|
_FDT((fdt_open_into(fdt_skel, fdt, size)));
|
|
g_free(fdt_skel);
|
|
|
|
/* Fixup cpu nodes */
|
|
if (cpu_update) {
|
|
_FDT((spapr_fixup_cpu_dt(fdt, spapr)));
|
|
}
|
|
|
|
/* Generate ibm,dynamic-reconfiguration-memory node if required */
|
|
if (memory_update && smc->dr_lmb_enabled) {
|
|
_FDT((spapr_populate_drconf_memory(spapr, fdt)));
|
|
}
|
|
|
|
/* Pack resulting tree */
|
|
_FDT((fdt_pack(fdt)));
|
|
|
|
if (fdt_totalsize(fdt) + sizeof(hdr) > size) {
|
|
trace_spapr_cas_failed(size);
|
|
return -1;
|
|
}
|
|
|
|
cpu_physical_memory_write(addr, &hdr, sizeof(hdr));
|
|
cpu_physical_memory_write(addr + sizeof(hdr), fdt, fdt_totalsize(fdt));
|
|
trace_spapr_cas_continue(fdt_totalsize(fdt) + sizeof(hdr));
|
|
g_free(fdt);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void spapr_finalize_fdt(sPAPRMachineState *spapr,
|
|
hwaddr fdt_addr,
|
|
hwaddr rtas_addr,
|
|
hwaddr rtas_size)
|
|
{
|
|
MachineState *machine = MACHINE(qdev_get_machine());
|
|
sPAPRMachineClass *smc = SPAPR_MACHINE_GET_CLASS(machine);
|
|
const char *boot_device = machine->boot_order;
|
|
int ret, i;
|
|
size_t cb = 0;
|
|
char *bootlist;
|
|
void *fdt;
|
|
sPAPRPHBState *phb;
|
|
|
|
fdt = g_malloc(FDT_MAX_SIZE);
|
|
|
|
/* open out the base tree into a temp buffer for the final tweaks */
|
|
_FDT((fdt_open_into(spapr->fdt_skel, fdt, FDT_MAX_SIZE)));
|
|
|
|
ret = spapr_populate_memory(spapr, fdt);
|
|
if (ret < 0) {
|
|
fprintf(stderr, "couldn't setup memory nodes in fdt\n");
|
|
exit(1);
|
|
}
|
|
|
|
ret = spapr_populate_vdevice(spapr->vio_bus, fdt);
|
|
if (ret < 0) {
|
|
fprintf(stderr, "couldn't setup vio devices in fdt\n");
|
|
exit(1);
|
|
}
|
|
|
|
if (object_resolve_path_type("", TYPE_SPAPR_RNG, NULL)) {
|
|
ret = spapr_rng_populate_dt(fdt);
|
|
if (ret < 0) {
|
|
fprintf(stderr, "could not set up rng device in the fdt\n");
|
|
exit(1);
|
|
}
|
|
}
|
|
|
|
QLIST_FOREACH(phb, &spapr->phbs, list) {
|
|
ret = spapr_populate_pci_dt(phb, PHANDLE_XICP, fdt);
|
|
if (ret < 0) {
|
|
error_report("couldn't setup PCI devices in fdt");
|
|
exit(1);
|
|
}
|
|
}
|
|
|
|
/* RTAS */
|
|
ret = spapr_rtas_device_tree_setup(fdt, rtas_addr, rtas_size);
|
|
if (ret < 0) {
|
|
fprintf(stderr, "Couldn't set up RTAS device tree properties\n");
|
|
}
|
|
|
|
/* cpus */
|
|
spapr_populate_cpus_dt_node(fdt, spapr);
|
|
|
|
bootlist = get_boot_devices_list(&cb, true);
|
|
if (cb && bootlist) {
|
|
int offset = fdt_path_offset(fdt, "/chosen");
|
|
if (offset < 0) {
|
|
exit(1);
|
|
}
|
|
for (i = 0; i < cb; i++) {
|
|
if (bootlist[i] == '\n') {
|
|
bootlist[i] = ' ';
|
|
}
|
|
|
|
}
|
|
ret = fdt_setprop_string(fdt, offset, "qemu,boot-list", bootlist);
|
|
}
|
|
|
|
if (boot_device && strlen(boot_device)) {
|
|
int offset = fdt_path_offset(fdt, "/chosen");
|
|
|
|
if (offset < 0) {
|
|
exit(1);
|
|
}
|
|
fdt_setprop_string(fdt, offset, "qemu,boot-device", boot_device);
|
|
}
|
|
|
|
if (!spapr->has_graphics) {
|
|
spapr_populate_chosen_stdout(fdt, spapr->vio_bus);
|
|
}
|
|
|
|
if (smc->dr_lmb_enabled) {
|
|
_FDT(spapr_drc_populate_dt(fdt, 0, NULL, SPAPR_DR_CONNECTOR_TYPE_LMB));
|
|
}
|
|
|
|
if (smc->dr_cpu_enabled) {
|
|
int offset = fdt_path_offset(fdt, "/cpus");
|
|
ret = spapr_drc_populate_dt(fdt, offset, NULL,
|
|
SPAPR_DR_CONNECTOR_TYPE_CPU);
|
|
if (ret < 0) {
|
|
error_report("Couldn't set up CPU DR device tree properties");
|
|
exit(1);
|
|
}
|
|
}
|
|
|
|
_FDT((fdt_pack(fdt)));
|
|
|
|
if (fdt_totalsize(fdt) > FDT_MAX_SIZE) {
|
|
error_report("FDT too big ! 0x%x bytes (max is 0x%x)",
|
|
fdt_totalsize(fdt), FDT_MAX_SIZE);
|
|
exit(1);
|
|
}
|
|
|
|
qemu_fdt_dumpdtb(fdt, fdt_totalsize(fdt));
|
|
cpu_physical_memory_write(fdt_addr, fdt, fdt_totalsize(fdt));
|
|
|
|
g_free(bootlist);
|
|
g_free(fdt);
|
|
}
|
|
|
|
static uint64_t translate_kernel_address(void *opaque, uint64_t addr)
|
|
{
|
|
return (addr & 0x0fffffff) + KERNEL_LOAD_ADDR;
|
|
}
|
|
|
|
static void emulate_spapr_hypercall(PowerPCCPU *cpu)
|
|
{
|
|
CPUPPCState *env = &cpu->env;
|
|
|
|
if (msr_pr) {
|
|
hcall_dprintf("Hypercall made with MSR[PR]=1\n");
|
|
env->gpr[3] = H_PRIVILEGE;
|
|
} else {
|
|
env->gpr[3] = spapr_hypercall(cpu, env->gpr[3], &env->gpr[4]);
|
|
}
|
|
}
|
|
|
|
#define HPTE(_table, _i) (void *)(((uint64_t *)(_table)) + ((_i) * 2))
|
|
#define HPTE_VALID(_hpte) (tswap64(*((uint64_t *)(_hpte))) & HPTE64_V_VALID)
|
|
#define HPTE_DIRTY(_hpte) (tswap64(*((uint64_t *)(_hpte))) & HPTE64_V_HPTE_DIRTY)
|
|
#define CLEAN_HPTE(_hpte) ((*(uint64_t *)(_hpte)) &= tswap64(~HPTE64_V_HPTE_DIRTY))
|
|
#define DIRTY_HPTE(_hpte) ((*(uint64_t *)(_hpte)) |= tswap64(HPTE64_V_HPTE_DIRTY))
|
|
|
|
/*
|
|
* Get the fd to access the kernel htab, re-opening it if necessary
|
|
*/
|
|
static int get_htab_fd(sPAPRMachineState *spapr)
|
|
{
|
|
if (spapr->htab_fd >= 0) {
|
|
return spapr->htab_fd;
|
|
}
|
|
|
|
spapr->htab_fd = kvmppc_get_htab_fd(false);
|
|
if (spapr->htab_fd < 0) {
|
|
error_report("Unable to open fd for reading hash table from KVM: %s",
|
|
strerror(errno));
|
|
}
|
|
|
|
return spapr->htab_fd;
|
|
}
|
|
|
|
static void close_htab_fd(sPAPRMachineState *spapr)
|
|
{
|
|
if (spapr->htab_fd >= 0) {
|
|
close(spapr->htab_fd);
|
|
}
|
|
spapr->htab_fd = -1;
|
|
}
|
|
|
|
static int spapr_hpt_shift_for_ramsize(uint64_t ramsize)
|
|
{
|
|
int shift;
|
|
|
|
/* We aim for a hash table of size 1/128 the size of RAM (rounded
|
|
* up). The PAPR recommendation is actually 1/64 of RAM size, but
|
|
* that's much more than is needed for Linux guests */
|
|
shift = ctz64(pow2ceil(ramsize)) - 7;
|
|
shift = MAX(shift, 18); /* Minimum architected size */
|
|
shift = MIN(shift, 46); /* Maximum architected size */
|
|
return shift;
|
|
}
|
|
|
|
static void spapr_reallocate_hpt(sPAPRMachineState *spapr, int shift,
|
|
Error **errp)
|
|
{
|
|
long rc;
|
|
|
|
/* Clean up any HPT info from a previous boot */
|
|
g_free(spapr->htab);
|
|
spapr->htab = NULL;
|
|
spapr->htab_shift = 0;
|
|
close_htab_fd(spapr);
|
|
|
|
rc = kvmppc_reset_htab(shift);
|
|
if (rc < 0) {
|
|
/* kernel-side HPT needed, but couldn't allocate one */
|
|
error_setg_errno(errp, errno,
|
|
"Failed to allocate KVM HPT of order %d (try smaller maxmem?)",
|
|
shift);
|
|
/* This is almost certainly fatal, but if the caller really
|
|
* wants to carry on with shift == 0, it's welcome to try */
|
|
} else if (rc > 0) {
|
|
/* kernel-side HPT allocated */
|
|
if (rc != shift) {
|
|
error_setg(errp,
|
|
"Requested order %d HPT, but kernel allocated order %ld (try smaller maxmem?)",
|
|
shift, rc);
|
|
}
|
|
|
|
spapr->htab_shift = shift;
|
|
spapr->htab = NULL;
|
|
} else {
|
|
/* kernel-side HPT not needed, allocate in userspace instead */
|
|
size_t size = 1ULL << shift;
|
|
int i;
|
|
|
|
spapr->htab = qemu_memalign(size, size);
|
|
if (!spapr->htab) {
|
|
error_setg_errno(errp, errno,
|
|
"Could not allocate HPT of order %d", shift);
|
|
return;
|
|
}
|
|
|
|
memset(spapr->htab, 0, size);
|
|
spapr->htab_shift = shift;
|
|
|
|
for (i = 0; i < size / HASH_PTE_SIZE_64; i++) {
|
|
DIRTY_HPTE(HPTE(spapr->htab, i));
|
|
}
|
|
}
|
|
}
|
|
|
|
static int find_unknown_sysbus_device(SysBusDevice *sbdev, void *opaque)
|
|
{
|
|
bool matched = false;
|
|
|
|
if (object_dynamic_cast(OBJECT(sbdev), TYPE_SPAPR_PCI_HOST_BRIDGE)) {
|
|
matched = true;
|
|
}
|
|
|
|
if (!matched) {
|
|
error_report("Device %s is not supported by this machine yet.",
|
|
qdev_fw_name(DEVICE(sbdev)));
|
|
exit(1);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void ppc_spapr_reset(void)
|
|
{
|
|
MachineState *machine = MACHINE(qdev_get_machine());
|
|
sPAPRMachineState *spapr = SPAPR_MACHINE(machine);
|
|
PowerPCCPU *first_ppc_cpu;
|
|
uint32_t rtas_limit;
|
|
|
|
/* Check for unknown sysbus devices */
|
|
foreach_dynamic_sysbus_device(find_unknown_sysbus_device, NULL);
|
|
|
|
/* Allocate and/or reset the hash page table */
|
|
spapr_reallocate_hpt(spapr,
|
|
spapr_hpt_shift_for_ramsize(machine->maxram_size),
|
|
&error_fatal);
|
|
|
|
/* Update the RMA size if necessary */
|
|
if (spapr->vrma_adjust) {
|
|
spapr->rma_size = kvmppc_rma_size(spapr_node0_size(),
|
|
spapr->htab_shift);
|
|
}
|
|
|
|
qemu_devices_reset();
|
|
|
|
/*
|
|
* We place the device tree and RTAS just below either the top of the RMA,
|
|
* or just below 2GB, whichever is lowere, so that it can be
|
|
* processed with 32-bit real mode code if necessary
|
|
*/
|
|
rtas_limit = MIN(spapr->rma_size, RTAS_MAX_ADDR);
|
|
spapr->rtas_addr = rtas_limit - RTAS_MAX_SIZE;
|
|
spapr->fdt_addr = spapr->rtas_addr - FDT_MAX_SIZE;
|
|
|
|
/* Load the fdt */
|
|
spapr_finalize_fdt(spapr, spapr->fdt_addr, spapr->rtas_addr,
|
|
spapr->rtas_size);
|
|
|
|
/* Copy RTAS over */
|
|
cpu_physical_memory_write(spapr->rtas_addr, spapr->rtas_blob,
|
|
spapr->rtas_size);
|
|
|
|
/* Set up the entry state */
|
|
first_ppc_cpu = POWERPC_CPU(first_cpu);
|
|
first_ppc_cpu->env.gpr[3] = spapr->fdt_addr;
|
|
first_ppc_cpu->env.gpr[5] = 0;
|
|
first_cpu->halted = 0;
|
|
first_ppc_cpu->env.nip = SPAPR_ENTRY_POINT;
|
|
|
|
}
|
|
|
|
static void spapr_create_nvram(sPAPRMachineState *spapr)
|
|
{
|
|
DeviceState *dev = qdev_create(&spapr->vio_bus->bus, "spapr-nvram");
|
|
DriveInfo *dinfo = drive_get(IF_PFLASH, 0, 0);
|
|
|
|
if (dinfo) {
|
|
qdev_prop_set_drive(dev, "drive", blk_by_legacy_dinfo(dinfo),
|
|
&error_fatal);
|
|
}
|
|
|
|
qdev_init_nofail(dev);
|
|
|
|
spapr->nvram = (struct sPAPRNVRAM *)dev;
|
|
}
|
|
|
|
static void spapr_rtc_create(sPAPRMachineState *spapr)
|
|
{
|
|
DeviceState *dev = qdev_create(NULL, TYPE_SPAPR_RTC);
|
|
|
|
qdev_init_nofail(dev);
|
|
spapr->rtc = dev;
|
|
|
|
object_property_add_alias(qdev_get_machine(), "rtc-time",
|
|
OBJECT(spapr->rtc), "date", NULL);
|
|
}
|
|
|
|
/* Returns whether we want to use VGA or not */
|
|
static bool spapr_vga_init(PCIBus *pci_bus, Error **errp)
|
|
{
|
|
switch (vga_interface_type) {
|
|
case VGA_NONE:
|
|
return false;
|
|
case VGA_DEVICE:
|
|
return true;
|
|
case VGA_STD:
|
|
case VGA_VIRTIO:
|
|
return pci_vga_init(pci_bus) != NULL;
|
|
default:
|
|
error_setg(errp,
|
|
"Unsupported VGA mode, only -vga std or -vga virtio is supported");
|
|
return false;
|
|
}
|
|
}
|
|
|
|
static int spapr_post_load(void *opaque, int version_id)
|
|
{
|
|
sPAPRMachineState *spapr = (sPAPRMachineState *)opaque;
|
|
int err = 0;
|
|
|
|
/* In earlier versions, there was no separate qdev for the PAPR
|
|
* RTC, so the RTC offset was stored directly in sPAPREnvironment.
|
|
* So when migrating from those versions, poke the incoming offset
|
|
* value into the RTC device */
|
|
if (version_id < 3) {
|
|
err = spapr_rtc_import_offset(spapr->rtc, spapr->rtc_offset);
|
|
}
|
|
|
|
return err;
|
|
}
|
|
|
|
static bool version_before_3(void *opaque, int version_id)
|
|
{
|
|
return version_id < 3;
|
|
}
|
|
|
|
static const VMStateDescription vmstate_spapr = {
|
|
.name = "spapr",
|
|
.version_id = 3,
|
|
.minimum_version_id = 1,
|
|
.post_load = spapr_post_load,
|
|
.fields = (VMStateField[]) {
|
|
/* used to be @next_irq */
|
|
VMSTATE_UNUSED_BUFFER(version_before_3, 0, 4),
|
|
|
|
/* RTC offset */
|
|
VMSTATE_UINT64_TEST(rtc_offset, sPAPRMachineState, version_before_3),
|
|
|
|
VMSTATE_PPC_TIMEBASE_V(tb, sPAPRMachineState, 2),
|
|
VMSTATE_END_OF_LIST()
|
|
},
|
|
};
|
|
|
|
static int htab_save_setup(QEMUFile *f, void *opaque)
|
|
{
|
|
sPAPRMachineState *spapr = opaque;
|
|
|
|
/* "Iteration" header */
|
|
qemu_put_be32(f, spapr->htab_shift);
|
|
|
|
if (spapr->htab) {
|
|
spapr->htab_save_index = 0;
|
|
spapr->htab_first_pass = true;
|
|
} else {
|
|
assert(kvm_enabled());
|
|
}
|
|
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void htab_save_first_pass(QEMUFile *f, sPAPRMachineState *spapr,
|
|
int64_t max_ns)
|
|
{
|
|
bool has_timeout = max_ns != -1;
|
|
int htabslots = HTAB_SIZE(spapr) / HASH_PTE_SIZE_64;
|
|
int index = spapr->htab_save_index;
|
|
int64_t starttime = qemu_clock_get_ns(QEMU_CLOCK_REALTIME);
|
|
|
|
assert(spapr->htab_first_pass);
|
|
|
|
do {
|
|
int chunkstart;
|
|
|
|
/* Consume invalid HPTEs */
|
|
while ((index < htabslots)
|
|
&& !HPTE_VALID(HPTE(spapr->htab, index))) {
|
|
index++;
|
|
CLEAN_HPTE(HPTE(spapr->htab, index));
|
|
}
|
|
|
|
/* Consume valid HPTEs */
|
|
chunkstart = index;
|
|
while ((index < htabslots) && (index - chunkstart < USHRT_MAX)
|
|
&& HPTE_VALID(HPTE(spapr->htab, index))) {
|
|
index++;
|
|
CLEAN_HPTE(HPTE(spapr->htab, index));
|
|
}
|
|
|
|
if (index > chunkstart) {
|
|
int n_valid = index - chunkstart;
|
|
|
|
qemu_put_be32(f, chunkstart);
|
|
qemu_put_be16(f, n_valid);
|
|
qemu_put_be16(f, 0);
|
|
qemu_put_buffer(f, HPTE(spapr->htab, chunkstart),
|
|
HASH_PTE_SIZE_64 * n_valid);
|
|
|
|
if (has_timeout &&
|
|
(qemu_clock_get_ns(QEMU_CLOCK_REALTIME) - starttime) > max_ns) {
|
|
break;
|
|
}
|
|
}
|
|
} while ((index < htabslots) && !qemu_file_rate_limit(f));
|
|
|
|
if (index >= htabslots) {
|
|
assert(index == htabslots);
|
|
index = 0;
|
|
spapr->htab_first_pass = false;
|
|
}
|
|
spapr->htab_save_index = index;
|
|
}
|
|
|
|
static int htab_save_later_pass(QEMUFile *f, sPAPRMachineState *spapr,
|
|
int64_t max_ns)
|
|
{
|
|
bool final = max_ns < 0;
|
|
int htabslots = HTAB_SIZE(spapr) / HASH_PTE_SIZE_64;
|
|
int examined = 0, sent = 0;
|
|
int index = spapr->htab_save_index;
|
|
int64_t starttime = qemu_clock_get_ns(QEMU_CLOCK_REALTIME);
|
|
|
|
assert(!spapr->htab_first_pass);
|
|
|
|
do {
|
|
int chunkstart, invalidstart;
|
|
|
|
/* Consume non-dirty HPTEs */
|
|
while ((index < htabslots)
|
|
&& !HPTE_DIRTY(HPTE(spapr->htab, index))) {
|
|
index++;
|
|
examined++;
|
|
}
|
|
|
|
chunkstart = index;
|
|
/* Consume valid dirty HPTEs */
|
|
while ((index < htabslots) && (index - chunkstart < USHRT_MAX)
|
|
&& HPTE_DIRTY(HPTE(spapr->htab, index))
|
|
&& HPTE_VALID(HPTE(spapr->htab, index))) {
|
|
CLEAN_HPTE(HPTE(spapr->htab, index));
|
|
index++;
|
|
examined++;
|
|
}
|
|
|
|
invalidstart = index;
|
|
/* Consume invalid dirty HPTEs */
|
|
while ((index < htabslots) && (index - invalidstart < USHRT_MAX)
|
|
&& HPTE_DIRTY(HPTE(spapr->htab, index))
|
|
&& !HPTE_VALID(HPTE(spapr->htab, index))) {
|
|
CLEAN_HPTE(HPTE(spapr->htab, index));
|
|
index++;
|
|
examined++;
|
|
}
|
|
|
|
if (index > chunkstart) {
|
|
int n_valid = invalidstart - chunkstart;
|
|
int n_invalid = index - invalidstart;
|
|
|
|
qemu_put_be32(f, chunkstart);
|
|
qemu_put_be16(f, n_valid);
|
|
qemu_put_be16(f, n_invalid);
|
|
qemu_put_buffer(f, HPTE(spapr->htab, chunkstart),
|
|
HASH_PTE_SIZE_64 * n_valid);
|
|
sent += index - chunkstart;
|
|
|
|
if (!final && (qemu_clock_get_ns(QEMU_CLOCK_REALTIME) - starttime) > max_ns) {
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (examined >= htabslots) {
|
|
break;
|
|
}
|
|
|
|
if (index >= htabslots) {
|
|
assert(index == htabslots);
|
|
index = 0;
|
|
}
|
|
} while ((examined < htabslots) && (!qemu_file_rate_limit(f) || final));
|
|
|
|
if (index >= htabslots) {
|
|
assert(index == htabslots);
|
|
index = 0;
|
|
}
|
|
|
|
spapr->htab_save_index = index;
|
|
|
|
return (examined >= htabslots) && (sent == 0) ? 1 : 0;
|
|
}
|
|
|
|
#define MAX_ITERATION_NS 5000000 /* 5 ms */
|
|
#define MAX_KVM_BUF_SIZE 2048
|
|
|
|
static int htab_save_iterate(QEMUFile *f, void *opaque)
|
|
{
|
|
sPAPRMachineState *spapr = opaque;
|
|
int fd;
|
|
int rc = 0;
|
|
|
|
/* Iteration header */
|
|
qemu_put_be32(f, 0);
|
|
|
|
if (!spapr->htab) {
|
|
assert(kvm_enabled());
|
|
|
|
fd = get_htab_fd(spapr);
|
|
if (fd < 0) {
|
|
return fd;
|
|
}
|
|
|
|
rc = kvmppc_save_htab(f, fd, MAX_KVM_BUF_SIZE, MAX_ITERATION_NS);
|
|
if (rc < 0) {
|
|
return rc;
|
|
}
|
|
} else if (spapr->htab_first_pass) {
|
|
htab_save_first_pass(f, spapr, MAX_ITERATION_NS);
|
|
} else {
|
|
rc = htab_save_later_pass(f, spapr, MAX_ITERATION_NS);
|
|
}
|
|
|
|
/* End marker */
|
|
qemu_put_be32(f, 0);
|
|
qemu_put_be16(f, 0);
|
|
qemu_put_be16(f, 0);
|
|
|
|
return rc;
|
|
}
|
|
|
|
static int htab_save_complete(QEMUFile *f, void *opaque)
|
|
{
|
|
sPAPRMachineState *spapr = opaque;
|
|
int fd;
|
|
|
|
/* Iteration header */
|
|
qemu_put_be32(f, 0);
|
|
|
|
if (!spapr->htab) {
|
|
int rc;
|
|
|
|
assert(kvm_enabled());
|
|
|
|
fd = get_htab_fd(spapr);
|
|
if (fd < 0) {
|
|
return fd;
|
|
}
|
|
|
|
rc = kvmppc_save_htab(f, fd, MAX_KVM_BUF_SIZE, -1);
|
|
if (rc < 0) {
|
|
return rc;
|
|
}
|
|
close_htab_fd(spapr);
|
|
} else {
|
|
if (spapr->htab_first_pass) {
|
|
htab_save_first_pass(f, spapr, -1);
|
|
}
|
|
htab_save_later_pass(f, spapr, -1);
|
|
}
|
|
|
|
/* End marker */
|
|
qemu_put_be32(f, 0);
|
|
qemu_put_be16(f, 0);
|
|
qemu_put_be16(f, 0);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int htab_load(QEMUFile *f, void *opaque, int version_id)
|
|
{
|
|
sPAPRMachineState *spapr = opaque;
|
|
uint32_t section_hdr;
|
|
int fd = -1;
|
|
|
|
if (version_id < 1 || version_id > 1) {
|
|
error_report("htab_load() bad version");
|
|
return -EINVAL;
|
|
}
|
|
|
|
section_hdr = qemu_get_be32(f);
|
|
|
|
if (section_hdr) {
|
|
Error *local_err = NULL;
|
|
|
|
/* First section gives the htab size */
|
|
spapr_reallocate_hpt(spapr, section_hdr, &local_err);
|
|
if (local_err) {
|
|
error_report_err(local_err);
|
|
return -EINVAL;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
if (!spapr->htab) {
|
|
assert(kvm_enabled());
|
|
|
|
fd = kvmppc_get_htab_fd(true);
|
|
if (fd < 0) {
|
|
error_report("Unable to open fd to restore KVM hash table: %s",
|
|
strerror(errno));
|
|
}
|
|
}
|
|
|
|
while (true) {
|
|
uint32_t index;
|
|
uint16_t n_valid, n_invalid;
|
|
|
|
index = qemu_get_be32(f);
|
|
n_valid = qemu_get_be16(f);
|
|
n_invalid = qemu_get_be16(f);
|
|
|
|
if ((index == 0) && (n_valid == 0) && (n_invalid == 0)) {
|
|
/* End of Stream */
|
|
break;
|
|
}
|
|
|
|
if ((index + n_valid + n_invalid) >
|
|
(HTAB_SIZE(spapr) / HASH_PTE_SIZE_64)) {
|
|
/* Bad index in stream */
|
|
error_report(
|
|
"htab_load() bad index %d (%hd+%hd entries) in htab stream (htab_shift=%d)",
|
|
index, n_valid, n_invalid, spapr->htab_shift);
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (spapr->htab) {
|
|
if (n_valid) {
|
|
qemu_get_buffer(f, HPTE(spapr->htab, index),
|
|
HASH_PTE_SIZE_64 * n_valid);
|
|
}
|
|
if (n_invalid) {
|
|
memset(HPTE(spapr->htab, index + n_valid), 0,
|
|
HASH_PTE_SIZE_64 * n_invalid);
|
|
}
|
|
} else {
|
|
int rc;
|
|
|
|
assert(fd >= 0);
|
|
|
|
rc = kvmppc_load_htab_chunk(f, fd, index, n_valid, n_invalid);
|
|
if (rc < 0) {
|
|
return rc;
|
|
}
|
|
}
|
|
}
|
|
|
|
if (!spapr->htab) {
|
|
assert(fd >= 0);
|
|
close(fd);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static SaveVMHandlers savevm_htab_handlers = {
|
|
.save_live_setup = htab_save_setup,
|
|
.save_live_iterate = htab_save_iterate,
|
|
.save_live_complete_precopy = htab_save_complete,
|
|
.load_state = htab_load,
|
|
};
|
|
|
|
static void spapr_boot_set(void *opaque, const char *boot_device,
|
|
Error **errp)
|
|
{
|
|
MachineState *machine = MACHINE(qdev_get_machine());
|
|
machine->boot_order = g_strdup(boot_device);
|
|
}
|
|
|
|
/*
|
|
* Reset routine for LMB DR devices.
|
|
*
|
|
* Unlike PCI DR devices, LMB DR devices explicitly register this reset
|
|
* routine. Reset for PCI DR devices will be handled by PHB reset routine
|
|
* when it walks all its children devices. LMB devices reset occurs
|
|
* as part of spapr_ppc_reset().
|
|
*/
|
|
static void spapr_drc_reset(void *opaque)
|
|
{
|
|
sPAPRDRConnector *drc = opaque;
|
|
DeviceState *d = DEVICE(drc);
|
|
|
|
if (d) {
|
|
device_reset(d);
|
|
}
|
|
}
|
|
|
|
static void spapr_create_lmb_dr_connectors(sPAPRMachineState *spapr)
|
|
{
|
|
MachineState *machine = MACHINE(spapr);
|
|
uint64_t lmb_size = SPAPR_MEMORY_BLOCK_SIZE;
|
|
uint32_t nr_lmbs = (machine->maxram_size - machine->ram_size)/lmb_size;
|
|
int i;
|
|
|
|
for (i = 0; i < nr_lmbs; i++) {
|
|
sPAPRDRConnector *drc;
|
|
uint64_t addr;
|
|
|
|
addr = i * lmb_size + spapr->hotplug_memory.base;
|
|
drc = spapr_dr_connector_new(OBJECT(spapr), SPAPR_DR_CONNECTOR_TYPE_LMB,
|
|
addr/lmb_size);
|
|
qemu_register_reset(spapr_drc_reset, drc);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* If RAM size, maxmem size and individual node mem sizes aren't aligned
|
|
* to SPAPR_MEMORY_BLOCK_SIZE(256MB), then refuse to start the guest
|
|
* since we can't support such unaligned sizes with DRCONF_MEMORY.
|
|
*/
|
|
static void spapr_validate_node_memory(MachineState *machine, Error **errp)
|
|
{
|
|
int i;
|
|
|
|
if (machine->ram_size % SPAPR_MEMORY_BLOCK_SIZE) {
|
|
error_setg(errp, "Memory size 0x" RAM_ADDR_FMT
|
|
" is not aligned to %llu MiB",
|
|
machine->ram_size,
|
|
SPAPR_MEMORY_BLOCK_SIZE / M_BYTE);
|
|
return;
|
|
}
|
|
|
|
if (machine->maxram_size % SPAPR_MEMORY_BLOCK_SIZE) {
|
|
error_setg(errp, "Maximum memory size 0x" RAM_ADDR_FMT
|
|
" is not aligned to %llu MiB",
|
|
machine->ram_size,
|
|
SPAPR_MEMORY_BLOCK_SIZE / M_BYTE);
|
|
return;
|
|
}
|
|
|
|
for (i = 0; i < nb_numa_nodes; i++) {
|
|
if (numa_info[i].node_mem % SPAPR_MEMORY_BLOCK_SIZE) {
|
|
error_setg(errp,
|
|
"Node %d memory size 0x%" PRIx64
|
|
" is not aligned to %llu MiB",
|
|
i, numa_info[i].node_mem,
|
|
SPAPR_MEMORY_BLOCK_SIZE / M_BYTE);
|
|
return;
|
|
}
|
|
}
|
|
}
|
|
|
|
/* pSeries LPAR / sPAPR hardware init */
|
|
static void ppc_spapr_init(MachineState *machine)
|
|
{
|
|
sPAPRMachineState *spapr = SPAPR_MACHINE(machine);
|
|
sPAPRMachineClass *smc = SPAPR_MACHINE_GET_CLASS(machine);
|
|
const char *kernel_filename = machine->kernel_filename;
|
|
const char *kernel_cmdline = machine->kernel_cmdline;
|
|
const char *initrd_filename = machine->initrd_filename;
|
|
PCIHostState *phb;
|
|
int i;
|
|
MemoryRegion *sysmem = get_system_memory();
|
|
MemoryRegion *ram = g_new(MemoryRegion, 1);
|
|
MemoryRegion *rma_region;
|
|
void *rma = NULL;
|
|
hwaddr rma_alloc_size;
|
|
hwaddr node0_size = spapr_node0_size();
|
|
uint32_t initrd_base = 0;
|
|
long kernel_size = 0, initrd_size = 0;
|
|
long load_limit, fw_size;
|
|
bool kernel_le = false;
|
|
char *filename;
|
|
int smt = kvmppc_smt_threads();
|
|
int spapr_cores = smp_cpus / smp_threads;
|
|
int spapr_max_cores = max_cpus / smp_threads;
|
|
|
|
if (smc->dr_cpu_enabled) {
|
|
if (smp_cpus % smp_threads) {
|
|
error_report("smp_cpus (%u) must be multiple of threads (%u)",
|
|
smp_cpus, smp_threads);
|
|
exit(1);
|
|
}
|
|
if (max_cpus % smp_threads) {
|
|
error_report("max_cpus (%u) must be multiple of threads (%u)",
|
|
max_cpus, smp_threads);
|
|
exit(1);
|
|
}
|
|
}
|
|
|
|
msi_nonbroken = true;
|
|
|
|
QLIST_INIT(&spapr->phbs);
|
|
|
|
cpu_ppc_hypercall = emulate_spapr_hypercall;
|
|
|
|
/* Allocate RMA if necessary */
|
|
rma_alloc_size = kvmppc_alloc_rma(&rma);
|
|
|
|
if (rma_alloc_size == -1) {
|
|
error_report("Unable to create RMA");
|
|
exit(1);
|
|
}
|
|
|
|
if (rma_alloc_size && (rma_alloc_size < node0_size)) {
|
|
spapr->rma_size = rma_alloc_size;
|
|
} else {
|
|
spapr->rma_size = node0_size;
|
|
|
|
/* With KVM, we don't actually know whether KVM supports an
|
|
* unbounded RMA (PR KVM) or is limited by the hash table size
|
|
* (HV KVM using VRMA), so we always assume the latter
|
|
*
|
|
* In that case, we also limit the initial allocations for RTAS
|
|
* etc... to 256M since we have no way to know what the VRMA size
|
|
* is going to be as it depends on the size of the hash table
|
|
* isn't determined yet.
|
|
*/
|
|
if (kvm_enabled()) {
|
|
spapr->vrma_adjust = 1;
|
|
spapr->rma_size = MIN(spapr->rma_size, 0x10000000);
|
|
}
|
|
}
|
|
|
|
if (spapr->rma_size > node0_size) {
|
|
error_report("Numa node 0 has to span the RMA (%#08"HWADDR_PRIx")",
|
|
spapr->rma_size);
|
|
exit(1);
|
|
}
|
|
|
|
/* Setup a load limit for the ramdisk leaving room for SLOF and FDT */
|
|
load_limit = MIN(spapr->rma_size, RTAS_MAX_ADDR) - FW_OVERHEAD;
|
|
|
|
/* Set up Interrupt Controller before we create the VCPUs */
|
|
spapr->xics = xics_system_init(machine,
|
|
DIV_ROUND_UP(max_cpus * smt, smp_threads),
|
|
XICS_IRQS_SPAPR, &error_fatal);
|
|
|
|
if (smc->dr_lmb_enabled) {
|
|
spapr_validate_node_memory(machine, &error_fatal);
|
|
}
|
|
|
|
/* init CPUs */
|
|
if (machine->cpu_model == NULL) {
|
|
machine->cpu_model = kvm_enabled() ? "host" : "POWER7";
|
|
}
|
|
|
|
if (smc->dr_cpu_enabled) {
|
|
char *type = spapr_get_cpu_core_type(machine->cpu_model);
|
|
|
|
spapr->cores = g_new0(Object *, spapr_max_cores);
|
|
for (i = 0; i < spapr_max_cores; i++) {
|
|
int core_dt_id = i * smt;
|
|
sPAPRDRConnector *drc =
|
|
spapr_dr_connector_new(OBJECT(spapr),
|
|
SPAPR_DR_CONNECTOR_TYPE_CPU, core_dt_id);
|
|
|
|
qemu_register_reset(spapr_drc_reset, drc);
|
|
|
|
if (i < spapr_cores) {
|
|
char *type = spapr_get_cpu_core_type(machine->cpu_model);
|
|
Object *core;
|
|
|
|
if (!object_class_by_name(type)) {
|
|
error_report("Unable to find sPAPR CPU Core definition");
|
|
exit(1);
|
|
}
|
|
|
|
core = object_new(type);
|
|
object_property_set_int(core, smp_threads, "nr-threads",
|
|
&error_fatal);
|
|
object_property_set_int(core, core_dt_id, CPU_CORE_PROP_CORE_ID,
|
|
&error_fatal);
|
|
object_property_set_bool(core, true, "realized", &error_fatal);
|
|
}
|
|
}
|
|
g_free(type);
|
|
} else {
|
|
for (i = 0; i < smp_cpus; i++) {
|
|
PowerPCCPU *cpu = cpu_ppc_init(machine->cpu_model);
|
|
if (cpu == NULL) {
|
|
error_report("Unable to find PowerPC CPU definition");
|
|
exit(1);
|
|
}
|
|
spapr_cpu_init(spapr, cpu, &error_fatal);
|
|
}
|
|
}
|
|
|
|
if (kvm_enabled()) {
|
|
/* Enable H_LOGICAL_CI_* so SLOF can talk to in-kernel devices */
|
|
kvmppc_enable_logical_ci_hcalls();
|
|
kvmppc_enable_set_mode_hcall();
|
|
}
|
|
|
|
/* allocate RAM */
|
|
memory_region_allocate_system_memory(ram, NULL, "ppc_spapr.ram",
|
|
machine->ram_size);
|
|
memory_region_add_subregion(sysmem, 0, ram);
|
|
|
|
if (rma_alloc_size && rma) {
|
|
rma_region = g_new(MemoryRegion, 1);
|
|
memory_region_init_ram_ptr(rma_region, NULL, "ppc_spapr.rma",
|
|
rma_alloc_size, rma);
|
|
vmstate_register_ram_global(rma_region);
|
|
memory_region_add_subregion(sysmem, 0, rma_region);
|
|
}
|
|
|
|
/* initialize hotplug memory address space */
|
|
if (machine->ram_size < machine->maxram_size) {
|
|
ram_addr_t hotplug_mem_size = machine->maxram_size - machine->ram_size;
|
|
/*
|
|
* Limit the number of hotpluggable memory slots to half the number
|
|
* slots that KVM supports, leaving the other half for PCI and other
|
|
* devices. However ensure that number of slots doesn't drop below 32.
|
|
*/
|
|
int max_memslots = kvm_enabled() ? kvm_get_max_memslots() / 2 :
|
|
SPAPR_MAX_RAM_SLOTS;
|
|
|
|
if (max_memslots < SPAPR_MAX_RAM_SLOTS) {
|
|
max_memslots = SPAPR_MAX_RAM_SLOTS;
|
|
}
|
|
if (machine->ram_slots > max_memslots) {
|
|
error_report("Specified number of memory slots %"
|
|
PRIu64" exceeds max supported %d",
|
|
machine->ram_slots, max_memslots);
|
|
exit(1);
|
|
}
|
|
|
|
spapr->hotplug_memory.base = ROUND_UP(machine->ram_size,
|
|
SPAPR_HOTPLUG_MEM_ALIGN);
|
|
memory_region_init(&spapr->hotplug_memory.mr, OBJECT(spapr),
|
|
"hotplug-memory", hotplug_mem_size);
|
|
memory_region_add_subregion(sysmem, spapr->hotplug_memory.base,
|
|
&spapr->hotplug_memory.mr);
|
|
}
|
|
|
|
if (smc->dr_lmb_enabled) {
|
|
spapr_create_lmb_dr_connectors(spapr);
|
|
}
|
|
|
|
filename = qemu_find_file(QEMU_FILE_TYPE_BIOS, "spapr-rtas.bin");
|
|
if (!filename) {
|
|
error_report("Could not find LPAR rtas '%s'", "spapr-rtas.bin");
|
|
exit(1);
|
|
}
|
|
spapr->rtas_size = get_image_size(filename);
|
|
if (spapr->rtas_size < 0) {
|
|
error_report("Could not get size of LPAR rtas '%s'", filename);
|
|
exit(1);
|
|
}
|
|
spapr->rtas_blob = g_malloc(spapr->rtas_size);
|
|
if (load_image_size(filename, spapr->rtas_blob, spapr->rtas_size) < 0) {
|
|
error_report("Could not load LPAR rtas '%s'", filename);
|
|
exit(1);
|
|
}
|
|
if (spapr->rtas_size > RTAS_MAX_SIZE) {
|
|
error_report("RTAS too big ! 0x%zx bytes (max is 0x%x)",
|
|
(size_t)spapr->rtas_size, RTAS_MAX_SIZE);
|
|
exit(1);
|
|
}
|
|
g_free(filename);
|
|
|
|
/* Set up EPOW events infrastructure */
|
|
spapr_events_init(spapr);
|
|
|
|
/* Set up the RTC RTAS interfaces */
|
|
spapr_rtc_create(spapr);
|
|
|
|
/* Set up VIO bus */
|
|
spapr->vio_bus = spapr_vio_bus_init();
|
|
|
|
for (i = 0; i < MAX_SERIAL_PORTS; i++) {
|
|
if (serial_hds[i]) {
|
|
spapr_vty_create(spapr->vio_bus, serial_hds[i]);
|
|
}
|
|
}
|
|
|
|
/* We always have at least the nvram device on VIO */
|
|
spapr_create_nvram(spapr);
|
|
|
|
/* Set up PCI */
|
|
spapr_pci_rtas_init();
|
|
|
|
phb = spapr_create_phb(spapr, 0);
|
|
|
|
for (i = 0; i < nb_nics; i++) {
|
|
NICInfo *nd = &nd_table[i];
|
|
|
|
if (!nd->model) {
|
|
nd->model = g_strdup("ibmveth");
|
|
}
|
|
|
|
if (strcmp(nd->model, "ibmveth") == 0) {
|
|
spapr_vlan_create(spapr->vio_bus, nd);
|
|
} else {
|
|
pci_nic_init_nofail(&nd_table[i], phb->bus, nd->model, NULL);
|
|
}
|
|
}
|
|
|
|
for (i = 0; i <= drive_get_max_bus(IF_SCSI); i++) {
|
|
spapr_vscsi_create(spapr->vio_bus);
|
|
}
|
|
|
|
/* Graphics */
|
|
if (spapr_vga_init(phb->bus, &error_fatal)) {
|
|
spapr->has_graphics = true;
|
|
machine->usb |= defaults_enabled() && !machine->usb_disabled;
|
|
}
|
|
|
|
if (machine->usb) {
|
|
if (smc->use_ohci_by_default) {
|
|
pci_create_simple(phb->bus, -1, "pci-ohci");
|
|
} else {
|
|
pci_create_simple(phb->bus, -1, "nec-usb-xhci");
|
|
}
|
|
|
|
if (spapr->has_graphics) {
|
|
USBBus *usb_bus = usb_bus_find(-1);
|
|
|
|
usb_create_simple(usb_bus, "usb-kbd");
|
|
usb_create_simple(usb_bus, "usb-mouse");
|
|
}
|
|
}
|
|
|
|
if (spapr->rma_size < (MIN_RMA_SLOF << 20)) {
|
|
error_report(
|
|
"pSeries SLOF firmware requires >= %ldM guest RMA (Real Mode Area memory)",
|
|
MIN_RMA_SLOF);
|
|
exit(1);
|
|
}
|
|
|
|
if (kernel_filename) {
|
|
uint64_t lowaddr = 0;
|
|
|
|
kernel_size = load_elf(kernel_filename, translate_kernel_address, NULL,
|
|
NULL, &lowaddr, NULL, 1, PPC_ELF_MACHINE,
|
|
0, 0);
|
|
if (kernel_size == ELF_LOAD_WRONG_ENDIAN) {
|
|
kernel_size = load_elf(kernel_filename,
|
|
translate_kernel_address, NULL,
|
|
NULL, &lowaddr, NULL, 0, PPC_ELF_MACHINE,
|
|
0, 0);
|
|
kernel_le = kernel_size > 0;
|
|
}
|
|
if (kernel_size < 0) {
|
|
error_report("error loading %s: %s",
|
|
kernel_filename, load_elf_strerror(kernel_size));
|
|
exit(1);
|
|
}
|
|
|
|
/* load initrd */
|
|
if (initrd_filename) {
|
|
/* Try to locate the initrd in the gap between the kernel
|
|
* and the firmware. Add a bit of space just in case
|
|
*/
|
|
initrd_base = (KERNEL_LOAD_ADDR + kernel_size + 0x1ffff) & ~0xffff;
|
|
initrd_size = load_image_targphys(initrd_filename, initrd_base,
|
|
load_limit - initrd_base);
|
|
if (initrd_size < 0) {
|
|
error_report("could not load initial ram disk '%s'",
|
|
initrd_filename);
|
|
exit(1);
|
|
}
|
|
} else {
|
|
initrd_base = 0;
|
|
initrd_size = 0;
|
|
}
|
|
}
|
|
|
|
if (bios_name == NULL) {
|
|
bios_name = FW_FILE_NAME;
|
|
}
|
|
filename = qemu_find_file(QEMU_FILE_TYPE_BIOS, bios_name);
|
|
if (!filename) {
|
|
error_report("Could not find LPAR firmware '%s'", bios_name);
|
|
exit(1);
|
|
}
|
|
fw_size = load_image_targphys(filename, 0, FW_MAX_SIZE);
|
|
if (fw_size <= 0) {
|
|
error_report("Could not load LPAR firmware '%s'", filename);
|
|
exit(1);
|
|
}
|
|
g_free(filename);
|
|
|
|
/* FIXME: Should register things through the MachineState's qdev
|
|
* interface, this is a legacy from the sPAPREnvironment structure
|
|
* which predated MachineState but had a similar function */
|
|
vmstate_register(NULL, 0, &vmstate_spapr, spapr);
|
|
register_savevm_live(NULL, "spapr/htab", -1, 1,
|
|
&savevm_htab_handlers, spapr);
|
|
|
|
/* Prepare the device tree */
|
|
spapr->fdt_skel = spapr_create_fdt_skel(initrd_base, initrd_size,
|
|
kernel_size, kernel_le,
|
|
kernel_cmdline,
|
|
spapr->check_exception_irq);
|
|
assert(spapr->fdt_skel != NULL);
|
|
|
|
/* used by RTAS */
|
|
QTAILQ_INIT(&spapr->ccs_list);
|
|
qemu_register_reset(spapr_ccs_reset_hook, spapr);
|
|
|
|
qemu_register_boot_set(spapr_boot_set, spapr);
|
|
}
|
|
|
|
static int spapr_kvm_type(const char *vm_type)
|
|
{
|
|
if (!vm_type) {
|
|
return 0;
|
|
}
|
|
|
|
if (!strcmp(vm_type, "HV")) {
|
|
return 1;
|
|
}
|
|
|
|
if (!strcmp(vm_type, "PR")) {
|
|
return 2;
|
|
}
|
|
|
|
error_report("Unknown kvm-type specified '%s'", vm_type);
|
|
exit(1);
|
|
}
|
|
|
|
/*
|
|
* Implementation of an interface to adjust firmware path
|
|
* for the bootindex property handling.
|
|
*/
|
|
static char *spapr_get_fw_dev_path(FWPathProvider *p, BusState *bus,
|
|
DeviceState *dev)
|
|
{
|
|
#define CAST(type, obj, name) \
|
|
((type *)object_dynamic_cast(OBJECT(obj), (name)))
|
|
SCSIDevice *d = CAST(SCSIDevice, dev, TYPE_SCSI_DEVICE);
|
|
sPAPRPHBState *phb = CAST(sPAPRPHBState, dev, TYPE_SPAPR_PCI_HOST_BRIDGE);
|
|
|
|
if (d) {
|
|
void *spapr = CAST(void, bus->parent, "spapr-vscsi");
|
|
VirtIOSCSI *virtio = CAST(VirtIOSCSI, bus->parent, TYPE_VIRTIO_SCSI);
|
|
USBDevice *usb = CAST(USBDevice, bus->parent, TYPE_USB_DEVICE);
|
|
|
|
if (spapr) {
|
|
/*
|
|
* Replace "channel@0/disk@0,0" with "disk@8000000000000000":
|
|
* We use SRP luns of the form 8000 | (bus << 8) | (id << 5) | lun
|
|
* in the top 16 bits of the 64-bit LUN
|
|
*/
|
|
unsigned id = 0x8000 | (d->id << 8) | d->lun;
|
|
return g_strdup_printf("%s@%"PRIX64, qdev_fw_name(dev),
|
|
(uint64_t)id << 48);
|
|
} else if (virtio) {
|
|
/*
|
|
* We use SRP luns of the form 01000000 | (target << 8) | lun
|
|
* in the top 32 bits of the 64-bit LUN
|
|
* Note: the quote above is from SLOF and it is wrong,
|
|
* the actual binding is:
|
|
* swap 0100 or 10 << or 20 << ( target lun-id -- srplun )
|
|
*/
|
|
unsigned id = 0x1000000 | (d->id << 16) | d->lun;
|
|
return g_strdup_printf("%s@%"PRIX64, qdev_fw_name(dev),
|
|
(uint64_t)id << 32);
|
|
} else if (usb) {
|
|
/*
|
|
* We use SRP luns of the form 01000000 | (usb-port << 16) | lun
|
|
* in the top 32 bits of the 64-bit LUN
|
|
*/
|
|
unsigned usb_port = atoi(usb->port->path);
|
|
unsigned id = 0x1000000 | (usb_port << 16) | d->lun;
|
|
return g_strdup_printf("%s@%"PRIX64, qdev_fw_name(dev),
|
|
(uint64_t)id << 32);
|
|
}
|
|
}
|
|
|
|
if (phb) {
|
|
/* Replace "pci" with "pci@800000020000000" */
|
|
return g_strdup_printf("pci@%"PRIX64, phb->buid);
|
|
}
|
|
|
|
return NULL;
|
|
}
|
|
|
|
static char *spapr_get_kvm_type(Object *obj, Error **errp)
|
|
{
|
|
sPAPRMachineState *spapr = SPAPR_MACHINE(obj);
|
|
|
|
return g_strdup(spapr->kvm_type);
|
|
}
|
|
|
|
static void spapr_set_kvm_type(Object *obj, const char *value, Error **errp)
|
|
{
|
|
sPAPRMachineState *spapr = SPAPR_MACHINE(obj);
|
|
|
|
g_free(spapr->kvm_type);
|
|
spapr->kvm_type = g_strdup(value);
|
|
}
|
|
|
|
static void spapr_machine_initfn(Object *obj)
|
|
{
|
|
sPAPRMachineState *spapr = SPAPR_MACHINE(obj);
|
|
|
|
spapr->htab_fd = -1;
|
|
object_property_add_str(obj, "kvm-type",
|
|
spapr_get_kvm_type, spapr_set_kvm_type, NULL);
|
|
object_property_set_description(obj, "kvm-type",
|
|
"Specifies the KVM virtualization mode (HV, PR)",
|
|
NULL);
|
|
}
|
|
|
|
static void spapr_machine_finalizefn(Object *obj)
|
|
{
|
|
sPAPRMachineState *spapr = SPAPR_MACHINE(obj);
|
|
|
|
g_free(spapr->kvm_type);
|
|
}
|
|
|
|
static void ppc_cpu_do_nmi_on_cpu(void *arg)
|
|
{
|
|
CPUState *cs = arg;
|
|
|
|
cpu_synchronize_state(cs);
|
|
ppc_cpu_do_system_reset(cs);
|
|
}
|
|
|
|
static void spapr_nmi(NMIState *n, int cpu_index, Error **errp)
|
|
{
|
|
CPUState *cs;
|
|
|
|
CPU_FOREACH(cs) {
|
|
async_run_on_cpu(cs, ppc_cpu_do_nmi_on_cpu, cs);
|
|
}
|
|
}
|
|
|
|
static void spapr_add_lmbs(DeviceState *dev, uint64_t addr, uint64_t size,
|
|
uint32_t node, Error **errp)
|
|
{
|
|
sPAPRDRConnector *drc;
|
|
sPAPRDRConnectorClass *drck;
|
|
uint32_t nr_lmbs = size/SPAPR_MEMORY_BLOCK_SIZE;
|
|
int i, fdt_offset, fdt_size;
|
|
void *fdt;
|
|
|
|
for (i = 0; i < nr_lmbs; i++) {
|
|
drc = spapr_dr_connector_by_id(SPAPR_DR_CONNECTOR_TYPE_LMB,
|
|
addr/SPAPR_MEMORY_BLOCK_SIZE);
|
|
g_assert(drc);
|
|
|
|
fdt = create_device_tree(&fdt_size);
|
|
fdt_offset = spapr_populate_memory_node(fdt, node, addr,
|
|
SPAPR_MEMORY_BLOCK_SIZE);
|
|
|
|
drck = SPAPR_DR_CONNECTOR_GET_CLASS(drc);
|
|
drck->attach(drc, dev, fdt, fdt_offset, !dev->hotplugged, errp);
|
|
addr += SPAPR_MEMORY_BLOCK_SIZE;
|
|
}
|
|
/* send hotplug notification to the
|
|
* guest only in case of hotplugged memory
|
|
*/
|
|
if (dev->hotplugged) {
|
|
spapr_hotplug_req_add_by_count(SPAPR_DR_CONNECTOR_TYPE_LMB, nr_lmbs);
|
|
}
|
|
}
|
|
|
|
static void spapr_memory_plug(HotplugHandler *hotplug_dev, DeviceState *dev,
|
|
uint32_t node, Error **errp)
|
|
{
|
|
Error *local_err = NULL;
|
|
sPAPRMachineState *ms = SPAPR_MACHINE(hotplug_dev);
|
|
PCDIMMDevice *dimm = PC_DIMM(dev);
|
|
PCDIMMDeviceClass *ddc = PC_DIMM_GET_CLASS(dimm);
|
|
MemoryRegion *mr = ddc->get_memory_region(dimm);
|
|
uint64_t align = memory_region_get_alignment(mr);
|
|
uint64_t size = memory_region_size(mr);
|
|
uint64_t addr;
|
|
|
|
if (size % SPAPR_MEMORY_BLOCK_SIZE) {
|
|
error_setg(&local_err, "Hotplugged memory size must be a multiple of "
|
|
"%lld MB", SPAPR_MEMORY_BLOCK_SIZE/M_BYTE);
|
|
goto out;
|
|
}
|
|
|
|
pc_dimm_memory_plug(dev, &ms->hotplug_memory, mr, align, &local_err);
|
|
if (local_err) {
|
|
goto out;
|
|
}
|
|
|
|
addr = object_property_get_int(OBJECT(dimm), PC_DIMM_ADDR_PROP, &local_err);
|
|
if (local_err) {
|
|
pc_dimm_memory_unplug(dev, &ms->hotplug_memory, mr);
|
|
goto out;
|
|
}
|
|
|
|
spapr_add_lmbs(dev, addr, size, node, &error_abort);
|
|
|
|
out:
|
|
error_propagate(errp, local_err);
|
|
}
|
|
|
|
void *spapr_populate_hotplug_cpu_dt(CPUState *cs, int *fdt_offset,
|
|
sPAPRMachineState *spapr)
|
|
{
|
|
PowerPCCPU *cpu = POWERPC_CPU(cs);
|
|
DeviceClass *dc = DEVICE_GET_CLASS(cs);
|
|
int id = ppc_get_vcpu_dt_id(cpu);
|
|
void *fdt;
|
|
int offset, fdt_size;
|
|
char *nodename;
|
|
|
|
fdt = create_device_tree(&fdt_size);
|
|
nodename = g_strdup_printf("%s@%x", dc->fw_name, id);
|
|
offset = fdt_add_subnode(fdt, 0, nodename);
|
|
|
|
spapr_populate_cpu_dt(cs, fdt, offset, spapr);
|
|
g_free(nodename);
|
|
|
|
*fdt_offset = offset;
|
|
return fdt;
|
|
}
|
|
|
|
static void spapr_machine_device_plug(HotplugHandler *hotplug_dev,
|
|
DeviceState *dev, Error **errp)
|
|
{
|
|
sPAPRMachineClass *smc = SPAPR_MACHINE_GET_CLASS(qdev_get_machine());
|
|
|
|
if (object_dynamic_cast(OBJECT(dev), TYPE_PC_DIMM)) {
|
|
int node;
|
|
|
|
if (!smc->dr_lmb_enabled) {
|
|
error_setg(errp, "Memory hotplug not supported for this machine");
|
|
return;
|
|
}
|
|
node = object_property_get_int(OBJECT(dev), PC_DIMM_NODE_PROP, errp);
|
|
if (*errp) {
|
|
return;
|
|
}
|
|
if (node < 0 || node >= MAX_NODES) {
|
|
error_setg(errp, "Invaild node %d", node);
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* Currently PowerPC kernel doesn't allow hot-adding memory to
|
|
* memory-less node, but instead will silently add the memory
|
|
* to the first node that has some memory. This causes two
|
|
* unexpected behaviours for the user.
|
|
*
|
|
* - Memory gets hotplugged to a different node than what the user
|
|
* specified.
|
|
* - Since pc-dimm subsystem in QEMU still thinks that memory belongs
|
|
* to memory-less node, a reboot will set things accordingly
|
|
* and the previously hotplugged memory now ends in the right node.
|
|
* This appears as if some memory moved from one node to another.
|
|
*
|
|
* So until kernel starts supporting memory hotplug to memory-less
|
|
* nodes, just prevent such attempts upfront in QEMU.
|
|
*/
|
|
if (nb_numa_nodes && !numa_info[node].node_mem) {
|
|
error_setg(errp, "Can't hotplug memory to memory-less node %d",
|
|
node);
|
|
return;
|
|
}
|
|
|
|
spapr_memory_plug(hotplug_dev, dev, node, errp);
|
|
} else if (object_dynamic_cast(OBJECT(dev), TYPE_SPAPR_CPU_CORE)) {
|
|
spapr_core_plug(hotplug_dev, dev, errp);
|
|
}
|
|
}
|
|
|
|
static void spapr_machine_device_unplug(HotplugHandler *hotplug_dev,
|
|
DeviceState *dev, Error **errp)
|
|
{
|
|
sPAPRMachineClass *smc = SPAPR_MACHINE_GET_CLASS(qdev_get_machine());
|
|
|
|
if (object_dynamic_cast(OBJECT(dev), TYPE_PC_DIMM)) {
|
|
error_setg(errp, "Memory hot unplug not supported by sPAPR");
|
|
} else if (object_dynamic_cast(OBJECT(dev), TYPE_SPAPR_CPU_CORE)) {
|
|
if (!smc->dr_cpu_enabled) {
|
|
error_setg(errp, "CPU hot unplug not supported on this machine");
|
|
return;
|
|
}
|
|
spapr_core_unplug(hotplug_dev, dev, errp);
|
|
}
|
|
}
|
|
|
|
static void spapr_machine_device_pre_plug(HotplugHandler *hotplug_dev,
|
|
DeviceState *dev, Error **errp)
|
|
{
|
|
if (object_dynamic_cast(OBJECT(dev), TYPE_SPAPR_CPU_CORE)) {
|
|
spapr_core_pre_plug(hotplug_dev, dev, errp);
|
|
}
|
|
}
|
|
|
|
static HotplugHandler *spapr_get_hotpug_handler(MachineState *machine,
|
|
DeviceState *dev)
|
|
{
|
|
if (object_dynamic_cast(OBJECT(dev), TYPE_PC_DIMM) ||
|
|
object_dynamic_cast(OBJECT(dev), TYPE_SPAPR_CPU_CORE)) {
|
|
return HOTPLUG_HANDLER(machine);
|
|
}
|
|
return NULL;
|
|
}
|
|
|
|
static unsigned spapr_cpu_index_to_socket_id(unsigned cpu_index)
|
|
{
|
|
/* Allocate to NUMA nodes on a "socket" basis (not that concept of
|
|
* socket means much for the paravirtualized PAPR platform) */
|
|
return cpu_index / smp_threads / smp_cores;
|
|
}
|
|
|
|
static HotpluggableCPUList *spapr_query_hotpluggable_cpus(MachineState *machine)
|
|
{
|
|
int i;
|
|
HotpluggableCPUList *head = NULL;
|
|
sPAPRMachineState *spapr = SPAPR_MACHINE(machine);
|
|
int spapr_max_cores = max_cpus / smp_threads;
|
|
int smt = kvmppc_smt_threads();
|
|
|
|
for (i = 0; i < spapr_max_cores; i++) {
|
|
HotpluggableCPUList *list_item = g_new0(typeof(*list_item), 1);
|
|
HotpluggableCPU *cpu_item = g_new0(typeof(*cpu_item), 1);
|
|
CpuInstanceProperties *cpu_props = g_new0(typeof(*cpu_props), 1);
|
|
|
|
cpu_item->type = spapr_get_cpu_core_type(machine->cpu_model);
|
|
cpu_item->vcpus_count = smp_threads;
|
|
cpu_props->has_core_id = true;
|
|
cpu_props->core_id = i * smt;
|
|
/* TODO: add 'has_node/node' here to describe
|
|
to which node core belongs */
|
|
|
|
cpu_item->props = cpu_props;
|
|
if (spapr->cores[i]) {
|
|
cpu_item->has_qom_path = true;
|
|
cpu_item->qom_path = object_get_canonical_path(spapr->cores[i]);
|
|
}
|
|
list_item->value = cpu_item;
|
|
list_item->next = head;
|
|
head = list_item;
|
|
}
|
|
return head;
|
|
}
|
|
|
|
static void spapr_machine_class_init(ObjectClass *oc, void *data)
|
|
{
|
|
MachineClass *mc = MACHINE_CLASS(oc);
|
|
sPAPRMachineClass *smc = SPAPR_MACHINE_CLASS(oc);
|
|
FWPathProviderClass *fwc = FW_PATH_PROVIDER_CLASS(oc);
|
|
NMIClass *nc = NMI_CLASS(oc);
|
|
HotplugHandlerClass *hc = HOTPLUG_HANDLER_CLASS(oc);
|
|
|
|
mc->desc = "pSeries Logical Partition (PAPR compliant)";
|
|
|
|
/*
|
|
* We set up the default / latest behaviour here. The class_init
|
|
* functions for the specific versioned machine types can override
|
|
* these details for backwards compatibility
|
|
*/
|
|
mc->init = ppc_spapr_init;
|
|
mc->reset = ppc_spapr_reset;
|
|
mc->block_default_type = IF_SCSI;
|
|
mc->max_cpus = MAX_CPUMASK_BITS;
|
|
mc->no_parallel = 1;
|
|
mc->default_boot_order = "";
|
|
mc->default_ram_size = 512 * M_BYTE;
|
|
mc->kvm_type = spapr_kvm_type;
|
|
mc->has_dynamic_sysbus = true;
|
|
mc->pci_allow_0_address = true;
|
|
mc->get_hotplug_handler = spapr_get_hotpug_handler;
|
|
hc->pre_plug = spapr_machine_device_pre_plug;
|
|
hc->plug = spapr_machine_device_plug;
|
|
hc->unplug = spapr_machine_device_unplug;
|
|
mc->cpu_index_to_socket_id = spapr_cpu_index_to_socket_id;
|
|
mc->query_hotpluggable_cpus = spapr_query_hotpluggable_cpus;
|
|
|
|
smc->dr_lmb_enabled = true;
|
|
smc->dr_cpu_enabled = true;
|
|
fwc->get_dev_path = spapr_get_fw_dev_path;
|
|
nc->nmi_monitor_handler = spapr_nmi;
|
|
}
|
|
|
|
static const TypeInfo spapr_machine_info = {
|
|
.name = TYPE_SPAPR_MACHINE,
|
|
.parent = TYPE_MACHINE,
|
|
.abstract = true,
|
|
.instance_size = sizeof(sPAPRMachineState),
|
|
.instance_init = spapr_machine_initfn,
|
|
.instance_finalize = spapr_machine_finalizefn,
|
|
.class_size = sizeof(sPAPRMachineClass),
|
|
.class_init = spapr_machine_class_init,
|
|
.interfaces = (InterfaceInfo[]) {
|
|
{ TYPE_FW_PATH_PROVIDER },
|
|
{ TYPE_NMI },
|
|
{ TYPE_HOTPLUG_HANDLER },
|
|
{ }
|
|
},
|
|
};
|
|
|
|
#define DEFINE_SPAPR_MACHINE(suffix, verstr, latest) \
|
|
static void spapr_machine_##suffix##_class_init(ObjectClass *oc, \
|
|
void *data) \
|
|
{ \
|
|
MachineClass *mc = MACHINE_CLASS(oc); \
|
|
spapr_machine_##suffix##_class_options(mc); \
|
|
if (latest) { \
|
|
mc->alias = "pseries"; \
|
|
mc->is_default = 1; \
|
|
} \
|
|
} \
|
|
static void spapr_machine_##suffix##_instance_init(Object *obj) \
|
|
{ \
|
|
MachineState *machine = MACHINE(obj); \
|
|
spapr_machine_##suffix##_instance_options(machine); \
|
|
} \
|
|
static const TypeInfo spapr_machine_##suffix##_info = { \
|
|
.name = MACHINE_TYPE_NAME("pseries-" verstr), \
|
|
.parent = TYPE_SPAPR_MACHINE, \
|
|
.class_init = spapr_machine_##suffix##_class_init, \
|
|
.instance_init = spapr_machine_##suffix##_instance_init, \
|
|
}; \
|
|
static void spapr_machine_register_##suffix(void) \
|
|
{ \
|
|
type_register(&spapr_machine_##suffix##_info); \
|
|
} \
|
|
type_init(spapr_machine_register_##suffix)
|
|
|
|
/*
|
|
* pseries-2.7
|
|
*/
|
|
static void spapr_machine_2_7_instance_options(MachineState *machine)
|
|
{
|
|
}
|
|
|
|
static void spapr_machine_2_7_class_options(MachineClass *mc)
|
|
{
|
|
/* Defaults for the latest behaviour inherited from the base class */
|
|
}
|
|
|
|
DEFINE_SPAPR_MACHINE(2_7, "2.7", true);
|
|
|
|
/*
|
|
* pseries-2.6
|
|
*/
|
|
#define SPAPR_COMPAT_2_6 \
|
|
HW_COMPAT_2_6 \
|
|
{ \
|
|
.driver = TYPE_SPAPR_PCI_HOST_BRIDGE,\
|
|
.property = "ddw",\
|
|
.value = stringify(off),\
|
|
},
|
|
|
|
static void spapr_machine_2_6_instance_options(MachineState *machine)
|
|
{
|
|
}
|
|
|
|
static void spapr_machine_2_6_class_options(MachineClass *mc)
|
|
{
|
|
sPAPRMachineClass *smc = SPAPR_MACHINE_CLASS(mc);
|
|
|
|
spapr_machine_2_7_class_options(mc);
|
|
smc->dr_cpu_enabled = false;
|
|
SET_MACHINE_COMPAT(mc, SPAPR_COMPAT_2_6);
|
|
}
|
|
|
|
DEFINE_SPAPR_MACHINE(2_6, "2.6", false);
|
|
|
|
/*
|
|
* pseries-2.5
|
|
*/
|
|
#define SPAPR_COMPAT_2_5 \
|
|
HW_COMPAT_2_5 \
|
|
{ \
|
|
.driver = "spapr-vlan", \
|
|
.property = "use-rx-buffer-pools", \
|
|
.value = "off", \
|
|
},
|
|
|
|
static void spapr_machine_2_5_instance_options(MachineState *machine)
|
|
{
|
|
}
|
|
|
|
static void spapr_machine_2_5_class_options(MachineClass *mc)
|
|
{
|
|
sPAPRMachineClass *smc = SPAPR_MACHINE_CLASS(mc);
|
|
|
|
spapr_machine_2_6_class_options(mc);
|
|
smc->use_ohci_by_default = true;
|
|
SET_MACHINE_COMPAT(mc, SPAPR_COMPAT_2_5);
|
|
}
|
|
|
|
DEFINE_SPAPR_MACHINE(2_5, "2.5", false);
|
|
|
|
/*
|
|
* pseries-2.4
|
|
*/
|
|
#define SPAPR_COMPAT_2_4 \
|
|
HW_COMPAT_2_4
|
|
|
|
static void spapr_machine_2_4_instance_options(MachineState *machine)
|
|
{
|
|
spapr_machine_2_5_instance_options(machine);
|
|
}
|
|
|
|
static void spapr_machine_2_4_class_options(MachineClass *mc)
|
|
{
|
|
sPAPRMachineClass *smc = SPAPR_MACHINE_CLASS(mc);
|
|
|
|
spapr_machine_2_5_class_options(mc);
|
|
smc->dr_lmb_enabled = false;
|
|
SET_MACHINE_COMPAT(mc, SPAPR_COMPAT_2_4);
|
|
}
|
|
|
|
DEFINE_SPAPR_MACHINE(2_4, "2.4", false);
|
|
|
|
/*
|
|
* pseries-2.3
|
|
*/
|
|
#define SPAPR_COMPAT_2_3 \
|
|
HW_COMPAT_2_3 \
|
|
{\
|
|
.driver = "spapr-pci-host-bridge",\
|
|
.property = "dynamic-reconfiguration",\
|
|
.value = "off",\
|
|
},
|
|
|
|
static void spapr_machine_2_3_instance_options(MachineState *machine)
|
|
{
|
|
spapr_machine_2_4_instance_options(machine);
|
|
savevm_skip_section_footers();
|
|
global_state_set_optional();
|
|
savevm_skip_configuration();
|
|
}
|
|
|
|
static void spapr_machine_2_3_class_options(MachineClass *mc)
|
|
{
|
|
spapr_machine_2_4_class_options(mc);
|
|
SET_MACHINE_COMPAT(mc, SPAPR_COMPAT_2_3);
|
|
}
|
|
DEFINE_SPAPR_MACHINE(2_3, "2.3", false);
|
|
|
|
/*
|
|
* pseries-2.2
|
|
*/
|
|
|
|
#define SPAPR_COMPAT_2_2 \
|
|
HW_COMPAT_2_2 \
|
|
{\
|
|
.driver = TYPE_SPAPR_PCI_HOST_BRIDGE,\
|
|
.property = "mem_win_size",\
|
|
.value = "0x20000000",\
|
|
},
|
|
|
|
static void spapr_machine_2_2_instance_options(MachineState *machine)
|
|
{
|
|
spapr_machine_2_3_instance_options(machine);
|
|
machine->suppress_vmdesc = true;
|
|
}
|
|
|
|
static void spapr_machine_2_2_class_options(MachineClass *mc)
|
|
{
|
|
spapr_machine_2_3_class_options(mc);
|
|
SET_MACHINE_COMPAT(mc, SPAPR_COMPAT_2_2);
|
|
}
|
|
DEFINE_SPAPR_MACHINE(2_2, "2.2", false);
|
|
|
|
/*
|
|
* pseries-2.1
|
|
*/
|
|
#define SPAPR_COMPAT_2_1 \
|
|
HW_COMPAT_2_1
|
|
|
|
static void spapr_machine_2_1_instance_options(MachineState *machine)
|
|
{
|
|
spapr_machine_2_2_instance_options(machine);
|
|
}
|
|
|
|
static void spapr_machine_2_1_class_options(MachineClass *mc)
|
|
{
|
|
spapr_machine_2_2_class_options(mc);
|
|
SET_MACHINE_COMPAT(mc, SPAPR_COMPAT_2_1);
|
|
}
|
|
DEFINE_SPAPR_MACHINE(2_1, "2.1", false);
|
|
|
|
static void spapr_machine_register_types(void)
|
|
{
|
|
type_register_static(&spapr_machine_info);
|
|
}
|
|
|
|
type_init(spapr_machine_register_types)
|