mirrors/qemu
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
a6e13e31d5
qemu/target/loongarch
History
Philippe Mathieu-Daudé 883f2c591f bulk: Rename TARGET_FMT_plx -> HWADDR_FMT_plx 
The 'hwaddr' type is defined in "exec/hwaddr.h" as:

    hwaddr is the type of a physical address
   (its size can be different from 'target_ulong').

All definitions use the 'HWADDR_' prefix, except TARGET_FMT_plx:

 $ fgrep define include/exec/hwaddr.h
 #define HWADDR_H
 #define HWADDR_BITS 64
 #define HWADDR_MAX UINT64_MAX
 #define TARGET_FMT_plx "%016" PRIx64
         ^^^^^^
 #define HWADDR_PRId PRId64
 #define HWADDR_PRIi PRIi64
 #define HWADDR_PRIo PRIo64
 #define HWADDR_PRIu PRIu64
 #define HWADDR_PRIx PRIx64
 #define HWADDR_PRIX PRIX64

Since hwaddr's size can be *different* from target_ulong, it is
very confusing to read one of its format using the 'TARGET_FMT_'
prefix, normally used for the target_long / target_ulong types:

$ fgrep TARGET_FMT_ include/exec/cpu-defs.h
 #define TARGET_FMT_lx "%08x"
 #define TARGET_FMT_ld "%d"
 #define TARGET_FMT_lu "%u"
 #define TARGET_FMT_lx "%016" PRIx64
 #define TARGET_FMT_ld "%" PRId64
 #define TARGET_FMT_lu "%" PRIu64

Apparently this format was missed during commit a8170e5e97
("Rename target_phys_addr_t to hwaddr"), so complete it by
doing a bulk-rename with:

 $ sed -i -e s/TARGET_FMT_plx/HWADDR_FMT_plx/g $(git grep -l TARGET_FMT_plx)

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230110212947.34557-1-philmd@linaro.org>
[thuth: Fix some warnings from checkpatch.pl along the way]
Signed-off-by: Thomas Huth <thuth@redhat.com>
2023-01-18 11:14:34 +01:00
..
insn_trans target/loongarch: Fix return value of CHECK_FPE 2022-11-07 10:54:11 +08:00
constant_timer.c target/loongarch: Add constant timer support 2022-06-06 18:09:03 +00:00
cpu-csr.h target/loongarch: Add CSRs definition 2022-06-06 18:09:03 +00:00
cpu-param.h target/loongarch: Add MMU support for LoongArch CPU. 2022-06-06 18:09:03 +00:00
cpu.c target/loongarch: Convert to 3-phase reset 2022-12-16 15:58:15 +00:00
cpu.h target/loongarch: Convert to 3-phase reset 2022-12-16 15:58:15 +00:00
csr_helper.c target/loongarch: Add lock when writing timer clear reg 2022-07-04 11:08:58 +05:30
disas.c target/loongarch: Add timer related instructions support. 2022-06-06 18:09:03 +00:00
fpu_helper.c target/loongarch: Remove cpu_fcsr0 2022-08-08 19:42:53 -07:00
gdbstub.c target/loongarch: Update gdb_set_fpu() and gdb_get_fpu() 2022-08-05 10:02:40 -07:00
helper.h target/loongarch: Remove cpu_fcsr0 2022-08-08 19:42:53 -07:00
insns.decode target/loongarch: Add timer related instructions support. 2022-06-06 18:09:03 +00:00
internals.h target/loongarch: Update gdb_set_fpu() and gdb_get_fpu() 2022-08-05 10:02:40 -07:00
iocsr_helper.c hw/intc: Fix LoongArch extioi coreisr accessing 2022-11-04 17:07:40 +08:00
Kconfig hw/loongarch: Add support loongson3 virt machine type. 2022-06-06 18:09:03 +00:00
machine.c target/loongarch: Add MMU support for LoongArch CPU. 2022-06-06 18:09:03 +00:00
meson.build target/loongarch: Add gdb support. 2022-06-06 18:14:13 +00:00
op_helper.c target/loongarch/op_helper: Fix coverity cond_at_most error 2022-07-19 21:53:58 +05:30
README docs/system/loongarch: Update the LoongArch document 2022-08-13 04:45:03 -07:00
tlb_helper.c bulk: Rename TARGET_FMT_plx -> HWADDR_FMT_plx 2023-01-18 11:14:34 +01:00
translate.c target/loongarch: Separate the hardware flags into MMU index and PLV 2022-11-07 10:54:08 +08:00
translate.h target/loongarch: Separate the hardware flags into MMU index and PLV 2022-11-07 10:54:08 +08:00

README 

- Introduction

  LoongArch is the general processor architecture of Loongson.

  The following versions of the LoongArch core are supported
    core: 3A5000
    https://github.com/loongson/LoongArch-Documentation/releases/download/2021.08.17/LoongArch-Vol1-v1.00-EN.pdf

  We can get the latest loongarch documents at https://github.com/loongson/LoongArch-Documentation/tags.


- System emulation

  You can reference docs/system/loongarch/loongson3.rst to get the information about system emulation of LoongArch.

- Linux-user emulation

  We already support Linux user emulation. We can use LoongArch cross-tools to build LoongArch executables on X86 machines,
  and We can also use qemu-loongarch64 to run LoongArch executables.

  1. Config cross-tools env.

     see System emulation.

  2. Test tests/tcg/multiarch.

     ./configure  --static  --prefix=/usr  --disable-werror --target-list="loongarch64-linux-user" --enable-debug

     cd build

     make && make check-tcg

  3. Run LoongArch system basic command with loongarch-clfs-system.

     - Config clfs env.

       wget https://github.com/loongson/build-tools/releases/download/2022.05.29/loongarch64-clfs-system-5.0.tar.bz2

       tar -vxf loongarch64-clfs-system-5.0.tar.bz2 -C /opt/clfs

       cp /opt/clfs/lib64/ld-linux-loongarch-lp64d.so.1  /lib64

       export LD_LIBRARY_PATH="/opt/clfs/lib64"

     - Run LoongArch system basic command.

       ./qemu-loongarch64  /opt/clfs/usr/bin/bash
       ./qemu-loongarch64  /opt/clfs/usr/bin/ls
       ./qemu-loongarch64  /opt/clfs/usr/bin/pwd

- Note.
  We can get the latest LoongArch documents or LoongArch tools at https://github.com/loongson/