qemu/hw/virtio-pci.c

350 lines
10 KiB
C

/*
* Virtio PCI Bindings
*
* Copyright IBM, Corp. 2007
* Copyright (c) 2009 CodeSourcery
*
* Authors:
* Anthony Liguori <aliguori@us.ibm.com>
* Paul Brook <paul@codesourcery.com>
*
* This work is licensed under the terms of the GNU GPL, version 2. See
* the COPYING file in the top-level directory.
*
*/
#include <inttypes.h>
#include "virtio.h"
#include "pci.h"
//#include "sysemu.h"
/* from Linux's linux/virtio_pci.h */
/* A 32-bit r/o bitmask of the features supported by the host */
#define VIRTIO_PCI_HOST_FEATURES 0
/* A 32-bit r/w bitmask of features activated by the guest */
#define VIRTIO_PCI_GUEST_FEATURES 4
/* A 32-bit r/w PFN for the currently selected queue */
#define VIRTIO_PCI_QUEUE_PFN 8
/* A 16-bit r/o queue size for the currently selected queue */
#define VIRTIO_PCI_QUEUE_NUM 12
/* A 16-bit r/w queue selector */
#define VIRTIO_PCI_QUEUE_SEL 14
/* A 16-bit r/w queue notifier */
#define VIRTIO_PCI_QUEUE_NOTIFY 16
/* An 8-bit device status register. */
#define VIRTIO_PCI_STATUS 18
/* An 8-bit r/o interrupt status register. Reading the value will return the
* current contents of the ISR and will also clear it. This is effectively
* a read-and-acknowledge. */
#define VIRTIO_PCI_ISR 19
#define VIRTIO_PCI_CONFIG 20
/* Virtio ABI version, if we increment this, we break the guest driver. */
#define VIRTIO_PCI_ABI_VERSION 0
/* How many bits to shift physical queue address written to QUEUE_PFN.
* 12 is historical, and due to x86 page size. */
#define VIRTIO_PCI_QUEUE_ADDR_SHIFT 12
/* QEMU doesn't strictly need write barriers since everything runs in
* lock-step. We'll leave the calls to wmb() in though to make it obvious for
* KVM or if kqemu gets SMP support.
*/
#define wmb() do { } while (0)
/* PCI bindings. */
typedef struct {
PCIDevice pci_dev;
VirtIODevice *vdev;
uint32_t addr;
uint16_t vendor;
uint16_t device;
uint16_t subvendor;
uint16_t class_code;
uint8_t pif;
} VirtIOPCIProxy;
/* virtio device */
static void virtio_pci_update_irq(void *opaque)
{
VirtIOPCIProxy *proxy = opaque;
qemu_set_irq(proxy->pci_dev.irq[0], proxy->vdev->isr & 1);
}
static void virtio_ioport_write(void *opaque, uint32_t addr, uint32_t val)
{
VirtIOPCIProxy *proxy = opaque;
VirtIODevice *vdev = proxy->vdev;
target_phys_addr_t pa;
addr -= proxy->addr;
switch (addr) {
case VIRTIO_PCI_GUEST_FEATURES:
/* Guest does not negotiate properly? We have to assume nothing. */
if (val & (1 << VIRTIO_F_BAD_FEATURE)) {
if (vdev->bad_features)
val = vdev->bad_features(vdev);
else
val = 0;
}
if (vdev->set_features)
vdev->set_features(vdev, val);
vdev->features = val;
break;
case VIRTIO_PCI_QUEUE_PFN:
pa = (target_phys_addr_t)val << VIRTIO_PCI_QUEUE_ADDR_SHIFT;
virtio_queue_set_addr(vdev, vdev->queue_sel, pa);
break;
case VIRTIO_PCI_QUEUE_SEL:
if (val < VIRTIO_PCI_QUEUE_MAX)
vdev->queue_sel = val;
break;
case VIRTIO_PCI_QUEUE_NOTIFY:
virtio_queue_notify(vdev, val);
break;
case VIRTIO_PCI_STATUS:
vdev->status = val & 0xFF;
if (vdev->status == 0)
virtio_reset(vdev);
break;
}
}
static uint32_t virtio_ioport_read(void *opaque, uint32_t addr)
{
VirtIOPCIProxy *proxy = opaque;
VirtIODevice *vdev = proxy->vdev;
uint32_t ret = 0xFFFFFFFF;
addr -= proxy->addr;
switch (addr) {
case VIRTIO_PCI_HOST_FEATURES:
ret = vdev->get_features(vdev);
ret |= (1 << VIRTIO_F_NOTIFY_ON_EMPTY) | (1 << VIRTIO_F_BAD_FEATURE);
break;
case VIRTIO_PCI_GUEST_FEATURES:
ret = vdev->features;
break;
case VIRTIO_PCI_QUEUE_PFN:
ret = virtio_queue_get_addr(vdev, vdev->queue_sel)
>> VIRTIO_PCI_QUEUE_ADDR_SHIFT;
break;
case VIRTIO_PCI_QUEUE_NUM:
ret = virtio_queue_get_num(vdev, vdev->queue_sel);
break;
case VIRTIO_PCI_QUEUE_SEL:
ret = vdev->queue_sel;
break;
case VIRTIO_PCI_STATUS:
ret = vdev->status;
break;
case VIRTIO_PCI_ISR:
/* reading from the ISR also clears it. */
ret = vdev->isr;
vdev->isr = 0;
virtio_update_irq(vdev);
break;
default:
break;
}
return ret;
}
static uint32_t virtio_pci_config_readb(void *opaque, uint32_t addr)
{
VirtIOPCIProxy *proxy = opaque;
addr -= proxy->addr + VIRTIO_PCI_CONFIG;
return virtio_config_readb(proxy->vdev, addr);
}
static uint32_t virtio_pci_config_readw(void *opaque, uint32_t addr)
{
VirtIOPCIProxy *proxy = opaque;
addr -= proxy->addr + VIRTIO_PCI_CONFIG;
return virtio_config_readw(proxy->vdev, addr);
}
static uint32_t virtio_pci_config_readl(void *opaque, uint32_t addr)
{
VirtIOPCIProxy *proxy = opaque;
addr -= proxy->addr + VIRTIO_PCI_CONFIG;
return virtio_config_readl(proxy->vdev, addr);
}
static void virtio_pci_config_writeb(void *opaque, uint32_t addr, uint32_t val)
{
VirtIOPCIProxy *proxy = opaque;
addr -= proxy->addr + VIRTIO_PCI_CONFIG;
virtio_config_writeb(proxy->vdev, addr, val);
}
static void virtio_pci_config_writew(void *opaque, uint32_t addr, uint32_t val)
{
VirtIOPCIProxy *proxy = opaque;
addr -= proxy->addr + VIRTIO_PCI_CONFIG;
virtio_config_writew(proxy->vdev, addr, val);
}
static void virtio_pci_config_writel(void *opaque, uint32_t addr, uint32_t val)
{
VirtIOPCIProxy *proxy = opaque;
addr -= proxy->addr + VIRTIO_PCI_CONFIG;
virtio_config_writel(proxy->vdev, addr, val);
}
static void virtio_map(PCIDevice *pci_dev, int region_num,
uint32_t addr, uint32_t size, int type)
{
VirtIOPCIProxy *proxy = container_of(pci_dev, VirtIOPCIProxy, pci_dev);
VirtIODevice *vdev = proxy->vdev;
int i;
proxy->addr = addr;
for (i = 0; i < 3; i++) {
register_ioport_write(addr, VIRTIO_PCI_CONFIG, 1 << i,
virtio_ioport_write, proxy);
register_ioport_read(addr, VIRTIO_PCI_CONFIG, 1 << i,
virtio_ioport_read, proxy);
}
if (vdev->config_len) {
register_ioport_write(addr + VIRTIO_PCI_CONFIG, vdev->config_len, 1,
virtio_pci_config_writeb, proxy);
register_ioport_write(addr + VIRTIO_PCI_CONFIG, vdev->config_len, 2,
virtio_pci_config_writew, proxy);
register_ioport_write(addr + VIRTIO_PCI_CONFIG, vdev->config_len, 4,
virtio_pci_config_writel, proxy);
register_ioport_read(addr + VIRTIO_PCI_CONFIG, vdev->config_len, 1,
virtio_pci_config_readb, proxy);
register_ioport_read(addr + VIRTIO_PCI_CONFIG, vdev->config_len, 2,
virtio_pci_config_readw, proxy);
register_ioport_read(addr + VIRTIO_PCI_CONFIG, vdev->config_len, 4,
virtio_pci_config_readl, proxy);
vdev->get_config(vdev, vdev->config);
}
}
static const VirtIOBindings virtio_pci_bindings = {
.update_irq = virtio_pci_update_irq
};
static void virtio_init_pci(VirtIOPCIProxy *proxy, VirtIODevice *vdev,
uint16_t vendor, uint16_t device,
uint16_t class_code, uint8_t pif)
{
uint8_t *config;
uint32_t size;
proxy->vdev = vdev;
config = proxy->pci_dev.config;
pci_config_set_vendor_id(config, vendor);
pci_config_set_device_id(config, device);
config[0x08] = VIRTIO_PCI_ABI_VERSION;
config[0x09] = pif;
pci_config_set_class(config, class_code);
config[PCI_HEADER_TYPE] = PCI_HEADER_TYPE_NORMAL;
config[0x2c] = vendor & 0xFF;
config[0x2d] = (vendor >> 8) & 0xFF;
config[0x2e] = vdev->device_id & 0xFF;
config[0x2f] = (vdev->device_id >> 8) & 0xFF;
config[0x3d] = 1;
size = 20 + vdev->config_len;
if (size & (size-1))
size = 1 << qemu_fls(size);
pci_register_io_region(&proxy->pci_dev, 0, size, PCI_ADDRESS_SPACE_IO,
virtio_map);
virtio_bind_device(vdev, &virtio_pci_bindings, proxy);
}
static void virtio_blk_init_pci(PCIDevice *pci_dev)
{
VirtIOPCIProxy *proxy = DO_UPCAST(VirtIOPCIProxy, pci_dev, pci_dev);
VirtIODevice *vdev;
vdev = virtio_blk_init(&pci_dev->qdev);
virtio_init_pci(proxy, vdev,
PCI_VENDOR_ID_REDHAT_QUMRANET,
PCI_DEVICE_ID_VIRTIO_BLOCK,
PCI_CLASS_STORAGE_OTHER,
0x00);
}
static void virtio_console_init_pci(PCIDevice *pci_dev)
{
VirtIOPCIProxy *proxy = DO_UPCAST(VirtIOPCIProxy, pci_dev, pci_dev);
VirtIODevice *vdev;
vdev = virtio_console_init(&pci_dev->qdev);
virtio_init_pci(proxy, vdev,
PCI_VENDOR_ID_REDHAT_QUMRANET,
PCI_DEVICE_ID_VIRTIO_CONSOLE,
PCI_CLASS_DISPLAY_OTHER,
0x00);
}
static void virtio_net_init_pci(PCIDevice *pci_dev)
{
VirtIOPCIProxy *proxy = DO_UPCAST(VirtIOPCIProxy, pci_dev, pci_dev);
VirtIODevice *vdev;
vdev = virtio_net_init(&pci_dev->qdev);
virtio_init_pci(proxy, vdev,
PCI_VENDOR_ID_REDHAT_QUMRANET,
PCI_DEVICE_ID_VIRTIO_NET,
PCI_CLASS_NETWORK_ETHERNET,
0x00);
}
static void virtio_balloon_init_pci(PCIDevice *pci_dev)
{
VirtIOPCIProxy *proxy = DO_UPCAST(VirtIOPCIProxy, pci_dev, pci_dev);
VirtIODevice *vdev;
vdev = virtio_balloon_init(&pci_dev->qdev);
virtio_init_pci(proxy, vdev,
PCI_VENDOR_ID_REDHAT_QUMRANET,
PCI_DEVICE_ID_VIRTIO_BALLOON,
PCI_CLASS_MEMORY_RAM,
0x00);
}
static void virtio_pci_register_devices(void)
{
pci_qdev_register("virtio-blk-pci", sizeof(VirtIOPCIProxy),
virtio_blk_init_pci);
pci_qdev_register("virtio-net-pci", sizeof(VirtIOPCIProxy),
virtio_net_init_pci);
pci_qdev_register("virtio-console-pci", sizeof(VirtIOPCIProxy),
virtio_console_init_pci);
pci_qdev_register("virtio-balloon-pci", sizeof(VirtIOPCIProxy),
virtio_balloon_init_pci);
}
device_init(virtio_pci_register_devices)