mirrors/qemu
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
9e8424088c
qemu/hw/ppc/mac_oldworld.c
BALATON Zoltan bb997e5c96 mac_oldworld: Change PCI address of macio to match real hardware 
The board firmware expect these to be at fixed addresses and programs
them without probing, this patch puts the macio device at the expected
PCI address.

Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <f14bcaf3cf129500710ba5289980a134086bd949.1602805637.git.balaton@eik.bme.hu>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2020-10-19 08:11:21 +01:00

480 lines
16 KiB
C
Raw Blame History

/*
* QEMU OldWorld PowerMac (currently ~G3 Beige) hardware System Emulator
*
* Copyright (c) 2004-2007 Fabrice Bellard
* Copyright (c) 2007 Jocelyn Mayer
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#include "qemu/osdep.h"
#include "qemu-common.h"
#include "qemu/units.h"
#include "qapi/error.h"
#include "hw/ppc/ppc.h"
#include "hw/qdev-properties.h"
#include "mac.h"
#include "hw/input/adb.h"
#include "sysemu/sysemu.h"
#include "net/net.h"
#include "hw/isa/isa.h"
#include "hw/pci/pci.h"
#include "hw/pci/pci_host.h"
#include "hw/boards.h"
#include "hw/nvram/fw_cfg.h"
#include "hw/char/escc.h"
#include "hw/misc/macio/macio.h"
#include "hw/loader.h"
#include "hw/fw-path-provider.h"
#include "elf.h"
#include "qemu/error-report.h"
#include "sysemu/kvm.h"
#include "sysemu/reset.h"
#include "kvm_ppc.h"
#include "exec/address-spaces.h"
#define MAX_IDE_BUS 2
#define CFG_ADDR 0xf0000510
#define TBFREQ 16600000UL
#define CLOCKFREQ 266000000UL
#define BUSFREQ 66000000UL
#define NDRV_VGA_FILENAME "qemu_vga.ndrv"
#define GRACKLE_BASE 0xfec00000
#define PROM_BASE 0xffc00000
#define PROM_SIZE (4 * MiB)
static void fw_cfg_boot_set(void *opaque, const char *boot_device,
Error **errp)
{
fw_cfg_modify_i16(opaque, FW_CFG_BOOT_DEVICE, boot_device[0]);
}
static uint64_t translate_kernel_address(void *opaque, uint64_t addr)
{
return (addr & 0x0fffffff) + KERNEL_LOAD_ADDR;
}
static void ppc_heathrow_reset(void *opaque)
{
PowerPCCPU *cpu = opaque;
cpu_reset(CPU(cpu));
}
static void ppc_heathrow_init(MachineState *machine)
{
ram_addr_t ram_size = machine->ram_size;
const char *boot_device = machine->boot_order;
PowerPCCPU *cpu = NULL;
CPUPPCState *env = NULL;
char *filename;
int i;
MemoryRegion *bios = g_new(MemoryRegion, 1);
uint32_t kernel_base, initrd_base, cmdline_base = 0;
int32_t kernel_size, initrd_size;
PCIBus *pci_bus;
PCIDevice *macio;
MACIOIDEState *macio_ide;
ESCCState *escc;
SysBusDevice *s;
DeviceState *dev, *pic_dev;
BusState *adb_bus;
uint64_t bios_addr;
int bios_size;
unsigned int smp_cpus = machine->smp.cpus;
uint16_t ppc_boot_device;
DriveInfo *hd[MAX_IDE_BUS * MAX_IDE_DEVS];
void *fw_cfg;
uint64_t tbfreq;
/* init CPUs */
for (i = 0; i < smp_cpus; i++) {
cpu = POWERPC_CPU(cpu_create(machine->cpu_type));
env = &cpu->env;
/* Set time-base frequency to 16.6 Mhz */
cpu_ppc_tb_init(env, TBFREQ);
qemu_register_reset(ppc_heathrow_reset, cpu);
}
/* allocate RAM */
if (ram_size > 2047 * MiB) {
error_report("Too much memory for this machine: %" PRId64 " MB, "
"maximum 2047 MB", ram_size / MiB);
exit(1);
}
memory_region_add_subregion(get_system_memory(), 0, machine->ram);
/* allocate and load firmware ROM */
memory_region_init_rom(bios, NULL, "ppc_heathrow.bios", PROM_SIZE,
&error_fatal);
memory_region_add_subregion(get_system_memory(), PROM_BASE, bios);
if (!bios_name) {
bios_name = PROM_FILENAME;
}
filename = qemu_find_file(QEMU_FILE_TYPE_BIOS, bios_name);
if (filename) {
/* Load OpenBIOS (ELF) */
bios_size = load_elf(filename, NULL, NULL, NULL, NULL, &bios_addr,
NULL, NULL, 1, PPC_ELF_MACHINE, 0, 0);
/* Unfortunately, load_elf sign-extends reading elf32 */
bios_addr = (uint32_t)bios_addr;
if (bios_size <= 0) {
/* or if could not load ELF try loading a binary ROM image */
bios_size = load_image_targphys(filename, PROM_BASE, PROM_SIZE);
bios_addr = PROM_BASE;
}
g_free(filename);
} else {
bios_size = -1;
}
if (bios_size < 0 || bios_addr - PROM_BASE + bios_size > PROM_SIZE) {
error_report("could not load PowerPC bios '%s'", bios_name);
exit(1);
}
if (machine->kernel_filename) {
int bswap_needed;
#ifdef BSWAP_NEEDED
bswap_needed = 1;
#else
bswap_needed = 0;
#endif
kernel_base = KERNEL_LOAD_ADDR;
kernel_size = load_elf(machine->kernel_filename, NULL,
translate_kernel_address, NULL, NULL, NULL,
NULL, NULL, 1, PPC_ELF_MACHINE, 0, 0);
if (kernel_size < 0)
kernel_size = load_aout(machine->kernel_filename, kernel_base,
ram_size - kernel_base, bswap_needed,
TARGET_PAGE_SIZE);
if (kernel_size < 0)
kernel_size = load_image_targphys(machine->kernel_filename,
kernel_base,
ram_size - kernel_base);
if (kernel_size < 0) {
error_report("could not load kernel '%s'",
machine->kernel_filename);
exit(1);
}
/* load initrd */
if (machine->initrd_filename) {
initrd_base = TARGET_PAGE_ALIGN(kernel_base + kernel_size +
KERNEL_GAP);
initrd_size = load_image_targphys(machine->initrd_filename,
initrd_base,
ram_size - initrd_base);
if (initrd_size < 0) {
error_report("could not load initial ram disk '%s'",
machine->initrd_filename);
exit(1);
}
cmdline_base = TARGET_PAGE_ALIGN(initrd_base + initrd_size);
} else {
initrd_base = 0;
initrd_size = 0;
cmdline_base = TARGET_PAGE_ALIGN(kernel_base + kernel_size + KERNEL_GAP);
}
ppc_boot_device = 'm';
} else {
kernel_base = 0;
kernel_size = 0;
initrd_base = 0;
initrd_size = 0;
ppc_boot_device = '\0';
for (i = 0; boot_device[i] != '\0'; i++) {
/* TOFIX: for now, the second IDE channel is not properly
* used by OHW. The Mac floppy disk are not emulated.
* For now, OHW cannot boot from the network.
*/
#if 0
if (boot_device[i] >= 'a' && boot_device[i] <= 'f') {
ppc_boot_device = boot_device[i];
break;
}
#else
if (boot_device[i] >= 'c' && boot_device[i] <= 'd') {
ppc_boot_device = boot_device[i];
break;
}
#endif
}
if (ppc_boot_device == '\0') {
error_report("No valid boot device for G3 Beige machine");
exit(1);
}
}
/* XXX: we register only 1 output pin for heathrow PIC */
pic_dev = qdev_new(TYPE_HEATHROW);
sysbus_realize_and_unref(SYS_BUS_DEVICE(pic_dev), &error_fatal);
/* Connect the heathrow PIC outputs to the 6xx bus */
for (i = 0; i < smp_cpus; i++) {
switch (PPC_INPUT(env)) {
case PPC_FLAGS_INPUT_6xx:
qdev_connect_gpio_out(pic_dev, 0,
((qemu_irq *)env->irq_inputs)[PPC6xx_INPUT_INT]);
break;
default:
error_report("Bus model not supported on OldWorld Mac machine");
exit(1);
}
}
/* Timebase Frequency */
if (kvm_enabled()) {
tbfreq = kvmppc_get_tbfreq();
} else {
tbfreq = TBFREQ;
}
/* init basic PC hardware */
if (PPC_INPUT(env) != PPC_FLAGS_INPUT_6xx) {
error_report("Only 6xx bus is supported on heathrow machine");
exit(1);
}
/* Grackle PCI host bridge */
dev = qdev_new(TYPE_GRACKLE_PCI_HOST_BRIDGE);
qdev_prop_set_uint32(dev, "ofw-addr", 0x80000000);
s = SYS_BUS_DEVICE(dev);
sysbus_realize_and_unref(s, &error_fatal);
sysbus_mmio_map(s, 0, GRACKLE_BASE);
sysbus_mmio_map(s, 1, GRACKLE_BASE + 0x200000);
/* PCI hole */
memory_region_add_subregion(get_system_memory(), 0x80000000ULL,
sysbus_mmio_get_region(s, 2));
/* Register 2 MB of ISA IO space */
memory_region_add_subregion(get_system_memory(), 0xfe000000,
sysbus_mmio_get_region(s, 3));
for (i = 0; i < 4; i++) {
qdev_connect_gpio_out(dev, i, qdev_get_gpio_in(pic_dev, 0x15 + i));
}
pci_bus = PCI_HOST_BRIDGE(dev)->bus;
pci_vga_init(pci_bus);
for (i = 0; i < nb_nics; i++) {
pci_nic_init_nofail(&nd_table[i], pci_bus, "ne2k_pci", NULL);
}
ide_drive_get(hd, ARRAY_SIZE(hd));
/* MacIO */
macio = pci_new(PCI_DEVFN(16, 0), TYPE_OLDWORLD_MACIO);
dev = DEVICE(macio);
qdev_prop_set_uint64(dev, "frequency", tbfreq);
object_property_set_link(OBJECT(macio), "pic", OBJECT(pic_dev),
&error_abort);
escc = ESCC(object_resolve_path_component(OBJECT(macio), "escc"));
qdev_prop_set_chr(DEVICE(escc), "chrA", serial_hd(0));
qdev_prop_set_chr(DEVICE(escc), "chrB", serial_hd(1));
pci_realize_and_unref(macio, pci_bus, &error_fatal);
macio_ide = MACIO_IDE(object_resolve_path_component(OBJECT(macio),
"ide[0]"));
macio_ide_init_drives(macio_ide, hd);
macio_ide = MACIO_IDE(object_resolve_path_component(OBJECT(macio),
"ide[1]"));
macio_ide_init_drives(macio_ide, &hd[MAX_IDE_DEVS]);
dev = DEVICE(object_resolve_path_component(OBJECT(macio), "cuda"));
adb_bus = qdev_get_child_bus(dev, "adb.0");
dev = qdev_new(TYPE_ADB_KEYBOARD);
qdev_realize_and_unref(dev, adb_bus, &error_fatal);
dev = qdev_new(TYPE_ADB_MOUSE);
qdev_realize_and_unref(dev, adb_bus, &error_fatal);
if (machine_usb(machine)) {
pci_create_simple(pci_bus, -1, "pci-ohci");
}
if (graphic_depth != 15 && graphic_depth != 32 && graphic_depth != 8)
graphic_depth = 15;
/* No PCI init: the BIOS will do it */
dev = qdev_new(TYPE_FW_CFG_MEM);
fw_cfg = FW_CFG(dev);
qdev_prop_set_uint32(dev, "data_width", 1);
qdev_prop_set_bit(dev, "dma_enabled", false);
object_property_add_child(OBJECT(qdev_get_machine()), TYPE_FW_CFG,
OBJECT(fw_cfg));
s = SYS_BUS_DEVICE(dev);
sysbus_realize_and_unref(s, &error_fatal);
sysbus_mmio_map(s, 0, CFG_ADDR);
sysbus_mmio_map(s, 1, CFG_ADDR + 2);
fw_cfg_add_i16(fw_cfg, FW_CFG_NB_CPUS, (uint16_t)smp_cpus);
fw_cfg_add_i16(fw_cfg, FW_CFG_MAX_CPUS, (uint16_t)machine->smp.max_cpus);
fw_cfg_add_i64(fw_cfg, FW_CFG_RAM_SIZE, (uint64_t)ram_size);
fw_cfg_add_i16(fw_cfg, FW_CFG_MACHINE_ID, ARCH_HEATHROW);
fw_cfg_add_i32(fw_cfg, FW_CFG_KERNEL_ADDR, kernel_base);
fw_cfg_add_i32(fw_cfg, FW_CFG_KERNEL_SIZE, kernel_size);
if (machine->kernel_cmdline) {
fw_cfg_add_i32(fw_cfg, FW_CFG_KERNEL_CMDLINE, cmdline_base);
pstrcpy_targphys("cmdline", cmdline_base, TARGET_PAGE_SIZE,
machine->kernel_cmdline);
} else {
fw_cfg_add_i32(fw_cfg, FW_CFG_KERNEL_CMDLINE, 0);
}
fw_cfg_add_i32(fw_cfg, FW_CFG_INITRD_ADDR, initrd_base);
fw_cfg_add_i32(fw_cfg, FW_CFG_INITRD_SIZE, initrd_size);
fw_cfg_add_i16(fw_cfg, FW_CFG_BOOT_DEVICE, ppc_boot_device);
fw_cfg_add_i16(fw_cfg, FW_CFG_PPC_WIDTH, graphic_width);
fw_cfg_add_i16(fw_cfg, FW_CFG_PPC_HEIGHT, graphic_height);
fw_cfg_add_i16(fw_cfg, FW_CFG_PPC_DEPTH, graphic_depth);
fw_cfg_add_i32(fw_cfg, FW_CFG_PPC_IS_KVM, kvm_enabled());
if (kvm_enabled()) {
uint8_t *hypercall;
hypercall = g_malloc(16);
kvmppc_get_hypercall(env, hypercall, 16);
fw_cfg_add_bytes(fw_cfg, FW_CFG_PPC_KVM_HC, hypercall, 16);
fw_cfg_add_i32(fw_cfg, FW_CFG_PPC_KVM_PID, getpid());
}
fw_cfg_add_i32(fw_cfg, FW_CFG_PPC_TBFREQ, tbfreq);
/* Mac OS X requires a "known good" clock-frequency value; pass it one. */
fw_cfg_add_i32(fw_cfg, FW_CFG_PPC_CLOCKFREQ, CLOCKFREQ);
fw_cfg_add_i32(fw_cfg, FW_CFG_PPC_BUSFREQ, BUSFREQ);
/* MacOS NDRV VGA driver */
filename = qemu_find_file(QEMU_FILE_TYPE_BIOS, NDRV_VGA_FILENAME);
if (filename) {
gchar *ndrv_file;
gsize ndrv_size;
if (g_file_get_contents(filename, &ndrv_file, &ndrv_size, NULL)) {
fw_cfg_add_file(fw_cfg, "ndrv/qemu_vga.ndrv", ndrv_file, ndrv_size);
}
g_free(filename);
}
qemu_register_boot_set(fw_cfg_boot_set, fw_cfg);
}
/*
* Implementation of an interface to adjust firmware path
* for the bootindex property handling.
*/
static char *heathrow_fw_dev_path(FWPathProvider *p, BusState *bus,
DeviceState *dev)
{
PCIDevice *pci;
IDEBus *ide_bus;
IDEState *ide_s;
MACIOIDEState *macio_ide;
if (!strcmp(object_get_typename(OBJECT(dev)), "macio-oldworld")) {
pci = PCI_DEVICE(dev);
return g_strdup_printf("mac-io@%x", PCI_SLOT(pci->devfn));
}
if (!strcmp(object_get_typename(OBJECT(dev)), "macio-ide")) {
macio_ide = MACIO_IDE(dev);
return g_strdup_printf("ata-3@%x", macio_ide->addr);
}
if (!strcmp(object_get_typename(OBJECT(dev)), "ide-drive")) {
ide_bus = IDE_BUS(qdev_get_parent_bus(dev));
ide_s = idebus_active_if(ide_bus);
if (ide_s->drive_kind == IDE_CD) {
return g_strdup("cdrom");
}
return g_strdup("disk");
}
if (!strcmp(object_get_typename(OBJECT(dev)), "ide-hd")) {
return g_strdup("disk");
}
if (!strcmp(object_get_typename(OBJECT(dev)), "ide-cd")) {
return g_strdup("cdrom");
}
if (!strcmp(object_get_typename(OBJECT(dev)), "virtio-blk-device")) {
return g_strdup("disk");
}
return NULL;
}
static int heathrow_kvm_type(MachineState *machine, const char *arg)
{
/* Always force PR KVM */
return 2;
}
static void heathrow_class_init(ObjectClass *oc, void *data)
{
MachineClass *mc = MACHINE_CLASS(oc);
FWPathProviderClass *fwc = FW_PATH_PROVIDER_CLASS(oc);
mc->desc = "Heathrow based PowerMAC";
mc->init = ppc_heathrow_init;
mc->block_default_type = IF_IDE;
mc->max_cpus = MAX_CPUS;
#ifndef TARGET_PPC64
mc->is_default = true;
#endif
/* TOFIX "cad" when Mac floppy is implemented */
mc->default_boot_order = "cd";
mc->kvm_type = heathrow_kvm_type;
mc->default_cpu_type = POWERPC_CPU_TYPE_NAME("750_v3.1");
mc->default_display = "std";
mc->ignore_boot_device_suffixes = true;
mc->default_ram_id = "ppc_heathrow.ram";
fwc->get_dev_path = heathrow_fw_dev_path;
}
static const TypeInfo ppc_heathrow_machine_info = {
.name = MACHINE_TYPE_NAME("g3beige"),
.parent = TYPE_MACHINE,
.class_init = heathrow_class_init,
.interfaces = (InterfaceInfo[]) {
{ TYPE_FW_PATH_PROVIDER },
{ }
},
};
static void ppc_heathrow_register_types(void)
{
type_register_static(&ppc_heathrow_machine_info);
}
type_init(ppc_heathrow_register_types);
Reference in New Issue View Git Blame Copy Permalink