9de53de60c
Implement the GICv4 VMAPI and VMAPTI commands. These write an interrupt translation table entry that maps (DeviceID,EventID) to (vPEID,vINTID,doorbell). The only difference between VMAPI and VMAPTI is that VMAPI assumes vINTID == EventID rather than both being specified in the command packet. (This code won't be reachable until we allow the GIC version to be set to 4. Support for reading this new virtual-interrupt DTE and handling it correctly will be implemented in a later commit.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220408141550.1271295-9-peter.maydell@linaro.org
280 lines
24 KiB
Plaintext
280 lines
24 KiB
Plaintext
# See docs/devel/tracing.rst for syntax documentation.
|
|
|
|
# i8259.c
|
|
pic_update_irq(bool master, uint8_t imr, uint8_t irr, uint8_t padd) "master %d imr %"PRIu8" irr %"PRIu8" padd %"PRIu8
|
|
pic_set_irq(bool master, int irq, int level) "master %d irq %d level %d"
|
|
pic_interrupt(int irq, int intno) "irq %d intno %d"
|
|
pic_ioport_write(bool master, uint64_t addr, uint64_t val) "master %d addr 0x%"PRIx64" val 0x%"PRIx64
|
|
pic_ioport_read(bool master, uint64_t addr, int val) "master %d addr 0x%"PRIx64" val 0x%x"
|
|
|
|
# apic_common.c
|
|
cpu_set_apic_base(uint64_t val) "0x%016"PRIx64
|
|
cpu_get_apic_base(uint64_t val) "0x%016"PRIx64
|
|
# coalescing
|
|
apic_report_irq_delivered(int apic_irq_delivered) "coalescing %d"
|
|
apic_reset_irq_delivered(int apic_irq_delivered) "old coalescing %d"
|
|
apic_get_irq_delivered(int apic_irq_delivered) "returning coalescing %d"
|
|
|
|
# apic.c
|
|
apic_local_deliver(int vector, uint32_t lvt) "vector %d delivery mode %d"
|
|
apic_deliver_irq(uint8_t dest, uint8_t dest_mode, uint8_t delivery_mode, uint8_t vector_num, uint8_t trigger_mode) "dest %d dest_mode %d delivery_mode %d vector %d trigger_mode %d"
|
|
apic_mem_readl(uint64_t addr, uint32_t val) "0x%"PRIx64" = 0x%08x"
|
|
apic_mem_writel(uint64_t addr, uint32_t val) "0x%"PRIx64" = 0x%08x"
|
|
|
|
# ioapic.c
|
|
ioapic_set_remote_irr(int n) "set remote irr for pin %d"
|
|
ioapic_clear_remote_irr(int n, int vector) "clear remote irr for pin %d vector %d"
|
|
ioapic_eoi_broadcast(int vector) "EOI broadcast for vector %d"
|
|
ioapic_eoi_delayed_reassert(int vector) "delayed reassert on EOI broadcast for vector %d"
|
|
ioapic_mem_read(uint8_t addr, uint8_t regsel, uint8_t size, uint32_t val) "ioapic mem read addr 0x%"PRIx8" regsel: 0x%"PRIx8" size 0x%"PRIx8" retval 0x%"PRIx32
|
|
ioapic_mem_write(uint8_t addr, uint8_t regsel, uint8_t size, uint32_t val) "ioapic mem write addr 0x%"PRIx8" regsel: 0x%"PRIx8" size 0x%"PRIx8" val 0x%"PRIx32
|
|
ioapic_set_irq(int vector, int level) "vector: %d level: %d"
|
|
|
|
# slavio_intctl.c
|
|
slavio_intctl_mem_readl(uint32_t cpu, uint64_t addr, uint32_t ret) "read cpu %d reg 0x%"PRIx64" = 0x%x"
|
|
slavio_intctl_mem_writel(uint32_t cpu, uint64_t addr, uint32_t val) "write cpu %d reg 0x%"PRIx64" = 0x%x"
|
|
slavio_intctl_mem_writel_clear(uint32_t cpu, uint32_t val, uint32_t intreg_pending) "Cleared cpu %d irq mask 0x%x, curmask 0x%x"
|
|
slavio_intctl_mem_writel_set(uint32_t cpu, uint32_t val, uint32_t intreg_pending) "Set cpu %d irq mask 0x%x, curmask 0x%x"
|
|
slavio_intctlm_mem_readl(uint64_t addr, uint32_t ret) "read system reg 0x%"PRIx64" = 0x%x"
|
|
slavio_intctlm_mem_writel(uint64_t addr, uint32_t val) "write system reg 0x%"PRIx64" = 0x%x"
|
|
slavio_intctlm_mem_writel_enable(uint32_t val, uint32_t intregm_disabled) "Enabled master irq mask 0x%x, curmask 0x%x"
|
|
slavio_intctlm_mem_writel_disable(uint32_t val, uint32_t intregm_disabled) "Disabled master irq mask 0x%x, curmask 0x%x"
|
|
slavio_intctlm_mem_writel_target(uint32_t cpu) "Set master irq cpu %d"
|
|
slavio_check_interrupts(uint32_t pending, uint32_t intregm_disabled) "pending 0x%x disabled 0x%x"
|
|
slavio_set_irq(uint32_t target_cpu, int irq, uint32_t pil, int level) "Set cpu %d irq %d -> pil %d level %d"
|
|
slavio_set_timer_irq_cpu(int cpu, int level) "Set cpu %d local timer level %d"
|
|
|
|
# grlib_irqmp.c
|
|
grlib_irqmp_check_irqs(uint32_t pend, uint32_t force, uint32_t mask, uint32_t lvl1, uint32_t lvl2) "pend:0x%04x force:0x%04x mask:0x%04x lvl1:0x%04x lvl0:0x%04x"
|
|
grlib_irqmp_ack(int intno) "interrupt:%d"
|
|
grlib_irqmp_set_irq(int irq) "Raise CPU IRQ %d"
|
|
grlib_irqmp_readl_unknown(uint64_t addr) "addr 0x%"PRIx64
|
|
grlib_irqmp_writel_unknown(uint64_t addr, uint32_t value) "addr 0x%"PRIx64" value 0x%x"
|
|
|
|
# xics.c
|
|
xics_icp_check_ipi(int server, uint8_t mfrr) "CPU %d can take IPI mfrr=0x%x"
|
|
xics_icp_accept(uint32_t old_xirr, uint32_t new_xirr) "icp_accept: XIRR 0x%"PRIx32"->0x%"PRIx32
|
|
xics_icp_eoi(int server, uint32_t xirr, uint32_t new_xirr) "icp_eoi: server %d given XIRR 0x%"PRIx32" new XIRR 0x%"PRIx32
|
|
xics_icp_irq(int server, int nr, uint8_t priority) "cpu %d trying to deliver irq 0x%"PRIx32" priority 0x%x"
|
|
xics_icp_raise(uint32_t xirr, uint8_t pending_priority) "raising IRQ new XIRR=0x%x new pending priority=0x%x"
|
|
xics_ics_set_irq_msi(int srcno, int nr) "set_irq_msi: srcno %d [irq 0x%x]"
|
|
xics_masked_pending(void) "set_irq_msi: masked pending"
|
|
xics_ics_set_irq_lsi(int srcno, int nr) "set_irq_lsi: srcno %d [irq 0x%x]"
|
|
xics_ics_write_xive(int nr, int srcno, int server, uint8_t priority) "ics_write_xive: irq 0x%x [src %d] server 0x%x prio 0x%x"
|
|
xics_ics_reject(int nr, int srcno) "reject irq 0x%x [src %d]"
|
|
xics_ics_eoi(int nr) "ics_eoi: irq 0x%x"
|
|
|
|
# s390_flic_kvm.c
|
|
flic_create_device(int err) "flic: create device failed %d"
|
|
flic_reset_failed(int err) "flic: reset failed %d"
|
|
|
|
# s390_flic.c
|
|
qemu_s390_airq_suppressed(uint8_t type, uint8_t isc) "flic: adapter I/O interrupt suppressed (type 0x%x isc 0x%x)"
|
|
qemu_s390_suppress_airq(uint8_t isc, const char *from, const char *to) "flic: for isc 0x%x, suppress airq by modifying ais mode from %s to %s"
|
|
|
|
# aspeed_vic.c
|
|
aspeed_vic_set_irq(int irq, int level) "Enabling IRQ %d: %d"
|
|
aspeed_vic_update_fiq(int flags) "Raising FIQ: %d"
|
|
aspeed_vic_update_irq(int flags) "Raising IRQ: %d"
|
|
aspeed_vic_read(uint64_t offset, unsigned size, uint32_t value) "From 0x%" PRIx64 " of size %u: 0x%" PRIx32
|
|
aspeed_vic_write(uint64_t offset, unsigned size, uint32_t data) "To 0x%" PRIx64 " of size %u: 0x%" PRIx32
|
|
|
|
# arm_gic.c
|
|
gic_enable_irq(int irq) "irq %d enabled"
|
|
gic_disable_irq(int irq) "irq %d disabled"
|
|
gic_set_irq(int irq, int level, int cpumask, int target) "irq %d level %d cpumask 0x%x target 0x%x"
|
|
gic_update_bestirq(const char *s, int cpu, int irq, int prio, int priority_mask, int running_priority) "%s %d irq %d priority %d cpu priority mask %d cpu running priority %d"
|
|
gic_update_set_irq(int cpu, const char *name, int level) "cpu[%d]: %s = %d"
|
|
gic_acknowledge_irq(const char *s, int cpu, int irq) "%s %d acknowledged irq %d"
|
|
gic_cpu_write(const char *s, int cpu, int addr, uint32_t val) "%s %d iface write at 0x%08x 0x%08" PRIx32
|
|
gic_cpu_read(const char *s, int cpu, int addr, uint32_t val) "%s %d iface read at 0x%08x: 0x%08" PRIx32
|
|
gic_hyp_read(int addr, uint32_t val) "hyp read at 0x%08x: 0x%08" PRIx32
|
|
gic_hyp_write(int addr, uint32_t val) "hyp write at 0x%08x: 0x%08" PRIx32
|
|
gic_dist_read(int addr, unsigned int size, uint32_t val) "dist read at 0x%08x size %u: 0x%08" PRIx32
|
|
gic_dist_write(int addr, unsigned int size, uint32_t val) "dist write at 0x%08x size %u: 0x%08" PRIx32
|
|
gic_lr_entry(int cpu, int entry, uint32_t val) "cpu %d: new lr entry %d: 0x%08" PRIx32
|
|
gic_update_maintenance_irq(int cpu, int val) "cpu %d: maintenance = %d"
|
|
|
|
# arm_gicv3_cpuif.c
|
|
gicv3_icc_pmr_read(uint32_t cpu, uint64_t val) "GICv3 ICC_PMR read cpu 0x%x value 0x%" PRIx64
|
|
gicv3_icc_pmr_write(uint32_t cpu, uint64_t val) "GICv3 ICC_PMR write cpu 0x%x value 0x%" PRIx64
|
|
gicv3_icc_bpr_read(int grp, uint32_t cpu, uint64_t val) "GICv3 ICC_BPR%d read cpu 0x%x value 0x%" PRIx64
|
|
gicv3_icc_bpr_write(int grp, uint32_t cpu, uint64_t val) "GICv3 ICC_BPR%d write cpu 0x%x value 0x%" PRIx64
|
|
gicv3_icc_ap_read(int grp, int regno, uint32_t cpu, uint64_t val) "GICv3 ICC_AP%dR%d read cpu 0x%x value 0x%" PRIx64
|
|
gicv3_icc_ap_write(int grp, int regno, uint32_t cpu, uint64_t val) "GICv3 ICC_AP%dR%d write cpu 0x%x value 0x%" PRIx64
|
|
gicv3_icc_igrpen_read(int grp, uint32_t cpu, uint64_t val) "GICv3 ICC_IGRPEN%d read cpu 0x%x value 0x%" PRIx64
|
|
gicv3_icc_igrpen_write(int grp, uint32_t cpu, uint64_t val) "GICv3 ICC_IGRPEN%d write cpu 0x%x value 0x%" PRIx64
|
|
gicv3_icc_igrpen1_el3_read(uint32_t cpu, uint64_t val) "GICv3 ICC_IGRPEN1_EL3 read cpu 0x%x value 0x%" PRIx64
|
|
gicv3_icc_igrpen1_el3_write(uint32_t cpu, uint64_t val) "GICv3 ICC_IGRPEN1_EL3 write cpu 0x%x value 0x%" PRIx64
|
|
gicv3_icc_ctlr_read(uint32_t cpu, uint64_t val) "GICv3 ICC_CTLR read cpu 0x%x value 0x%" PRIx64
|
|
gicv3_icc_ctlr_write(uint32_t cpu, uint64_t val) "GICv3 ICC_CTLR write cpu 0x%x value 0x%" PRIx64
|
|
gicv3_icc_ctlr_el3_read(uint32_t cpu, uint64_t val) "GICv3 ICC_CTLR_EL3 read cpu 0x%x value 0x%" PRIx64
|
|
gicv3_icc_ctlr_el3_write(uint32_t cpu, uint64_t val) "GICv3 ICC_CTLR_EL3 write cpu 0x%x value 0x%" PRIx64
|
|
gicv3_cpuif_update(uint32_t cpuid, int irq, int grp, int prio) "GICv3 CPU i/f 0x%x HPPI update: irq %d group %d prio %d"
|
|
gicv3_cpuif_set_irqs(uint32_t cpuid, int fiqlevel, int irqlevel) "GICv3 CPU i/f 0x%x HPPI update: setting FIQ %d IRQ %d"
|
|
gicv3_icc_generate_sgi(uint32_t cpuid, int irq, int irm, uint32_t aff, uint32_t targetlist) "GICv3 CPU i/f 0x%x generating SGI %d IRM %d target affinity 0x%xxx targetlist 0x%x"
|
|
gicv3_icc_iar0_read(uint32_t cpu, uint64_t val) "GICv3 ICC_IAR0 read cpu 0x%x value 0x%" PRIx64
|
|
gicv3_icc_iar1_read(uint32_t cpu, uint64_t val) "GICv3 ICC_IAR1 read cpu 0x%x value 0x%" PRIx64
|
|
gicv3_icc_eoir_write(int grp, uint32_t cpu, uint64_t val) "GICv3 ICC_EOIR%d write cpu 0x%x value 0x%" PRIx64
|
|
gicv3_icc_hppir0_read(uint32_t cpu, uint64_t val) "GICv3 ICC_HPPIR0 read cpu 0x%x value 0x%" PRIx64
|
|
gicv3_icc_hppir1_read(uint32_t cpu, uint64_t val) "GICv3 ICC_HPPIR1 read cpu 0x%x value 0x%" PRIx64
|
|
gicv3_icc_dir_write(uint32_t cpu, uint64_t val) "GICv3 ICC_DIR write cpu 0x%x value 0x%" PRIx64
|
|
gicv3_icc_rpr_read(uint32_t cpu, uint64_t val) "GICv3 ICC_RPR read cpu 0x%x value 0x%" PRIx64
|
|
gicv3_ich_ap_read(int grp, int regno, uint32_t cpu, uint64_t val) "GICv3 ICH_AP%dR%d read cpu 0x%x value 0x%" PRIx64
|
|
gicv3_ich_ap_write(int grp, int regno, uint32_t cpu, uint64_t val) "GICv3 ICH_AP%dR%d write cpu 0x%x value 0x%" PRIx64
|
|
gicv3_ich_hcr_read(uint32_t cpu, uint64_t val) "GICv3 ICH_HCR_EL2 read cpu 0x%x value 0x%" PRIx64
|
|
gicv3_ich_hcr_write(uint32_t cpu, uint64_t val) "GICv3 ICH_HCR_EL2 write cpu 0x%x value 0x%" PRIx64
|
|
gicv3_ich_vmcr_read(uint32_t cpu, uint64_t val) "GICv3 ICH_VMCR_EL2 read cpu 0x%x value 0x%" PRIx64
|
|
gicv3_ich_vmcr_write(uint32_t cpu, uint64_t val) "GICv3 ICH_VMCR_EL2 write cpu 0x%x value 0x%" PRIx64
|
|
gicv3_ich_lr_read(int regno, uint32_t cpu, uint64_t val) "GICv3 ICH_LR%d_EL2 read cpu 0x%x value 0x%" PRIx64
|
|
gicv3_ich_lr32_read(int regno, uint32_t cpu, uint32_t val) "GICv3 ICH_LR%d read cpu 0x%x value 0x%" PRIx32
|
|
gicv3_ich_lrc_read(int regno, uint32_t cpu, uint32_t val) "GICv3 ICH_LRC%d read cpu 0x%x value 0x%" PRIx32
|
|
gicv3_ich_lr_write(int regno, uint32_t cpu, uint64_t val) "GICv3 ICH_LR%d_EL2 write cpu 0x%x value 0x%" PRIx64
|
|
gicv3_ich_lr32_write(int regno, uint32_t cpu, uint32_t val) "GICv3 ICH_LR%d write cpu 0x%x value 0x%" PRIx32
|
|
gicv3_ich_lrc_write(int regno, uint32_t cpu, uint32_t val) "GICv3 ICH_LRC%d write cpu 0x%x value 0x%" PRIx32
|
|
gicv3_ich_vtr_read(uint32_t cpu, uint64_t val) "GICv3 ICH_VTR read cpu 0x%x value 0x%" PRIx64
|
|
gicv3_ich_misr_read(uint32_t cpu, uint64_t val) "GICv3 ICH_MISR read cpu 0x%x value 0x%" PRIx64
|
|
gicv3_ich_eisr_read(uint32_t cpu, uint64_t val) "GICv3 ICH_EISR read cpu 0x%x value 0x%" PRIx64
|
|
gicv3_ich_elrsr_read(uint32_t cpu, uint64_t val) "GICv3 ICH_ELRSR read cpu 0x%x value 0x%" PRIx64
|
|
gicv3_icv_ap_read(int grp, int regno, uint32_t cpu, uint64_t val) "GICv3 ICV_AP%dR%d read cpu 0x%x value 0x%" PRIx64
|
|
gicv3_icv_ap_write(int grp, int regno, uint32_t cpu, uint64_t val) "GICv3 ICV_AP%dR%d write cpu 0x%x value 0x%" PRIx64
|
|
gicv3_icv_bpr_read(int grp, uint32_t cpu, uint64_t val) "GICv3 ICV_BPR%d read cpu 0x%x value 0x%" PRIx64
|
|
gicv3_icv_bpr_write(int grp, uint32_t cpu, uint64_t val) "GICv3 ICV_BPR%d write cpu 0x%x value 0x%" PRIx64
|
|
gicv3_icv_pmr_read(uint32_t cpu, uint64_t val) "GICv3 ICV_PMR read cpu 0x%x value 0x%" PRIx64
|
|
gicv3_icv_pmr_write(uint32_t cpu, uint64_t val) "GICv3 ICV_PMR write cpu 0x%x value 0x%" PRIx64
|
|
gicv3_icv_igrpen_read(int grp, uint32_t cpu, uint64_t val) "GICv3 ICV_IGRPEN%d read cpu 0x%x value 0x%" PRIx64
|
|
gicv3_icv_igrpen_write(int grp, uint32_t cpu, uint64_t val) "GICv3 ICV_IGRPEN%d write cpu 0x%x value 0x%" PRIx64
|
|
gicv3_icv_ctlr_read(uint32_t cpu, uint64_t val) "GICv3 ICV_CTLR read cpu 0x%x value 0x%" PRIx64
|
|
gicv3_icv_ctlr_write(uint32_t cpu, uint64_t val) "GICv3 ICV_CTLR write cpu 0x%x value 0x%" PRIx64
|
|
gicv3_icv_rpr_read(uint32_t cpu, uint64_t val) "GICv3 ICV_RPR read cpu 0x%x value 0x%" PRIx64
|
|
gicv3_icv_hppir_read(int grp, uint32_t cpu, uint64_t val) "GICv3 ICV_HPPIR%d read cpu 0x%x value 0x%" PRIx64
|
|
gicv3_icv_dir_write(uint32_t cpu, uint64_t val) "GICv3 ICV_DIR write cpu 0x%x value 0x%" PRIx64
|
|
gicv3_icv_iar_read(int grp, uint32_t cpu, uint64_t val) "GICv3 ICV_IAR%d read cpu 0x%x value 0x%" PRIx64
|
|
gicv3_icv_eoir_write(int grp, uint32_t cpu, uint64_t val) "GICv3 ICV_EOIR%d write cpu 0x%x value 0x%" PRIx64
|
|
gicv3_cpuif_virt_update(uint32_t cpuid, int idx) "GICv3 CPU i/f 0x%x virt HPPI update LR index %d"
|
|
gicv3_cpuif_virt_set_irqs(uint32_t cpuid, int fiqlevel, int irqlevel, int maintlevel) "GICv3 CPU i/f 0x%x virt HPPI update: setting FIQ %d IRQ %d maintenance-irq %d"
|
|
|
|
# arm_gicv3_dist.c
|
|
gicv3_dist_read(uint64_t offset, uint64_t data, unsigned size, bool secure) "GICv3 distributor read: offset 0x%" PRIx64 " data 0x%" PRIx64 " size %u secure %d"
|
|
gicv3_dist_badread(uint64_t offset, unsigned size, bool secure) "GICv3 distributor read: offset 0x%" PRIx64 " size %u secure %d: error"
|
|
gicv3_dist_write(uint64_t offset, uint64_t data, unsigned size, bool secure) "GICv3 distributor write: offset 0x%" PRIx64 " data 0x%" PRIx64 " size %u secure %d"
|
|
gicv3_dist_badwrite(uint64_t offset, uint64_t data, unsigned size, bool secure) "GICv3 distributor write: offset 0x%" PRIx64 " data 0x%" PRIx64 " size %u secure %d: error"
|
|
gicv3_dist_set_irq(int irq, int level) "GICv3 distributor interrupt %d level changed to %d"
|
|
|
|
# arm_gicv3_redist.c
|
|
gicv3_redist_read(uint32_t cpu, uint64_t offset, uint64_t data, unsigned size, bool secure) "GICv3 redistributor 0x%x read: offset 0x%" PRIx64 " data 0x%" PRIx64 " size %u secure %d"
|
|
gicv3_redist_badread(uint32_t cpu, uint64_t offset, unsigned size, bool secure) "GICv3 redistributor 0x%x read: offset 0x%" PRIx64 " size %u secure %d: error"
|
|
gicv3_redist_write(uint32_t cpu, uint64_t offset, uint64_t data, unsigned size, bool secure) "GICv3 redistributor 0x%x write: offset 0x%" PRIx64 " data 0x%" PRIx64 " size %u secure %d"
|
|
gicv3_redist_badwrite(uint32_t cpu, uint64_t offset, uint64_t data, unsigned size, bool secure) "GICv3 redistributor 0x%x write: offset 0x%" PRIx64 " data 0x%" PRIx64 " size %u secure %d: error"
|
|
gicv3_redist_set_irq(uint32_t cpu, int irq, int level) "GICv3 redistributor 0x%x interrupt %d level changed to %d"
|
|
gicv3_redist_send_sgi(uint32_t cpu, int irq) "GICv3 redistributor 0x%x pending SGI %d"
|
|
|
|
# arm_gicv3_its.c
|
|
gicv3_its_read(uint64_t offset, uint64_t data, unsigned size) "GICv3 ITS read: offset 0x%" PRIx64 " data 0x%" PRIx64 " size %u"
|
|
gicv3_its_badread(uint64_t offset, unsigned size) "GICv3 ITS read: offset 0x%" PRIx64 " size %u: error"
|
|
gicv3_its_write(uint64_t offset, uint64_t data, unsigned size) "GICv3 ITS write: offset 0x%" PRIx64 " data 0x%" PRIx64 " size %u"
|
|
gicv3_its_badwrite(uint64_t offset, uint64_t data, unsigned size) "GICv3 ITS write: offset 0x%" PRIx64 " data 0x%" PRIx64 " size %u: error"
|
|
gicv3_its_translation_write(uint64_t offset, uint64_t data, unsigned size, uint32_t requester_id) "GICv3 ITS TRANSLATER write: offset 0x%" PRIx64 " data 0x%" PRIx64 " size %u requester_id 0x%x"
|
|
gicv3_its_process_command(uint32_t rd_offset, uint8_t cmd) "GICv3 ITS: processing command at offset 0x%x: 0x%x"
|
|
gicv3_its_cmd_int(uint32_t devid, uint32_t eventid) "GICv3 ITS: command INT DeviceID 0x%x EventID 0x%x"
|
|
gicv3_its_cmd_clear(uint32_t devid, uint32_t eventid) "GICv3 ITS: command CLEAR DeviceID 0x%x EventID 0x%x"
|
|
gicv3_its_cmd_discard(uint32_t devid, uint32_t eventid) "GICv3 ITS: command DISCARD DeviceID 0x%x EventID 0x%x"
|
|
gicv3_its_cmd_sync(void) "GICv3 ITS: command SYNC"
|
|
gicv3_its_cmd_mapd(uint32_t devid, uint32_t size, uint64_t ittaddr, int valid) "GICv3 ITS: command MAPD DeviceID 0x%x Size 0x%x ITT_addr 0x%" PRIx64 " V %d"
|
|
gicv3_its_cmd_mapc(uint32_t icid, uint64_t rdbase, int valid) "GICv3 ITS: command MAPC ICID 0x%x RDbase 0x%" PRIx64 " V %d"
|
|
gicv3_its_cmd_mapi(uint32_t devid, uint32_t eventid, uint32_t icid) "GICv3 ITS: command MAPI DeviceID 0x%x EventID 0x%x ICID 0x%x"
|
|
gicv3_its_cmd_mapti(uint32_t devid, uint32_t eventid, uint32_t icid, uint32_t intid) "GICv3 ITS: command MAPTI DeviceID 0x%x EventID 0x%x ICID 0x%x pINTID 0x%x"
|
|
gicv3_its_cmd_inv(void) "GICv3 ITS: command INV or INVALL"
|
|
gicv3_its_cmd_movall(uint64_t rd1, uint64_t rd2) "GICv3 ITS: command MOVALL RDbase1 0x%" PRIx64 " RDbase2 0x%" PRIx64
|
|
gicv3_its_cmd_movi(uint32_t devid, uint32_t eventid, uint32_t icid) "GICv3 ITS: command MOVI DeviceID 0x%x EventID 0x%x ICID 0x%x"
|
|
gicv3_its_cmd_vmapi(uint32_t devid, uint32_t eventid, uint32_t vpeid, uint32_t doorbell) "GICv3 ITS: command VMAPI DeviceID 0x%x EventID 0x%x vPEID 0x%x Dbell_pINTID 0x%x"
|
|
gicv3_its_cmd_vmapti(uint32_t devid, uint32_t eventid, uint32_t vpeid, uint32_t vintid, uint32_t doorbell) "GICv3 ITS: command VMAPI DeviceID 0x%x EventID 0x%x vPEID 0x%x vINTID 0x%x Dbell_pINTID 0x%x"
|
|
gicv3_its_cmd_unknown(unsigned cmd) "GICv3 ITS: unknown command 0x%x"
|
|
gicv3_its_cte_read(uint32_t icid, int valid, uint32_t rdbase) "GICv3 ITS: Collection Table read for ICID 0x%x: valid %d RDBase 0x%x"
|
|
gicv3_its_cte_write(uint32_t icid, int valid, uint32_t rdbase) "GICv3 ITS: Collection Table write for ICID 0x%x: valid %d RDBase 0x%x"
|
|
gicv3_its_cte_read_fault(uint32_t icid) "GICv3 ITS: Collection Table read for ICID 0x%x: faulted"
|
|
gicv3_its_ite_read(uint64_t ittaddr, uint32_t eventid, int valid, int inttype, uint32_t intid, uint32_t icid, uint32_t vpeid, uint32_t doorbell) "GICv3 ITS: Interrupt Table read for ITTaddr 0x%" PRIx64 " EventID 0x%x: valid %d inttype %d intid 0x%x ICID 0x%x vPEID 0x%x doorbell 0x%x"
|
|
gicv3_its_ite_read_fault(uint64_t ittaddr, uint32_t eventid) "GICv3 ITS: Interrupt Table read for ITTaddr 0x%" PRIx64 " EventID 0x%x: faulted"
|
|
gicv3_its_ite_write(uint64_t ittaddr, uint32_t eventid, int valid, int inttype, uint32_t intid, uint32_t icid, uint32_t vpeid, uint32_t doorbell) "GICv3 ITS: Interrupt Table write for ITTaddr 0x%" PRIx64 " EventID 0x%x: valid %d inttype %d intid 0x%x ICID 0x%x vPEID 0x%x doorbell 0x%x"
|
|
gicv3_its_dte_read(uint32_t devid, int valid, uint32_t size, uint64_t ittaddr) "GICv3 ITS: Device Table read for DeviceID 0x%x: valid %d size 0x%x ITTaddr 0x%" PRIx64
|
|
gicv3_its_dte_write(uint32_t devid, int valid, uint32_t size, uint64_t ittaddr) "GICv3 ITS: Device Table write for DeviceID 0x%x: valid %d size 0x%x ITTaddr 0x%" PRIx64
|
|
gicv3_its_dte_read_fault(uint32_t devid) "GICv3 ITS: Device Table read for DeviceID 0x%x: faulted"
|
|
|
|
# armv7m_nvic.c
|
|
nvic_recompute_state(int vectpending, int vectpending_prio, int exception_prio) "NVIC state recomputed: vectpending %d vectpending_prio %d exception_prio %d"
|
|
nvic_recompute_state_secure(int vectpending, bool vectpending_is_s_banked, int vectpending_prio, int exception_prio) "NVIC state recomputed: vectpending %d is_s_banked %d vectpending_prio %d exception_prio %d"
|
|
nvic_set_prio(int irq, bool secure, uint8_t prio) "NVIC set irq %d secure-bank %d priority %d"
|
|
nvic_irq_update(int vectpending, int pendprio, int exception_prio, int level) "NVIC vectpending %d pending prio %d exception_prio %d: setting irq line to %d"
|
|
nvic_escalate_prio(int irq, int irqprio, int runprio) "NVIC escalating irq %d to HardFault: insufficient priority %d >= %d"
|
|
nvic_escalate_disabled(int irq) "NVIC escalating irq %d to HardFault: disabled"
|
|
nvic_set_pending(int irq, bool secure, bool targets_secure, bool derived, int en, int prio) "NVIC set pending irq %d secure-bank %d targets_secure %d derived %d (enabled: %d priority %d)"
|
|
nvic_clear_pending(int irq, bool secure, int en, int prio) "NVIC clear pending irq %d secure-bank %d (enabled: %d priority %d)"
|
|
nvic_acknowledge_irq(int irq, int prio) "NVIC acknowledge IRQ: %d now active (prio %d)"
|
|
nvic_get_pending_irq_info(int irq, bool secure) "NVIC next IRQ %d: targets_secure: %d"
|
|
nvic_complete_irq(int irq, bool secure) "NVIC complete IRQ %d (secure %d)"
|
|
nvic_set_irq_level(int irq, int level) "NVIC external irq %d level set to %d"
|
|
nvic_set_nmi_level(int level) "NVIC external NMI level set to %d"
|
|
nvic_sysreg_read(uint64_t addr, uint32_t value, unsigned size) "NVIC sysreg read addr 0x%" PRIx64 " data 0x%" PRIx32 " size %u"
|
|
nvic_sysreg_write(uint64_t addr, uint32_t value, unsigned size) "NVIC sysreg write addr 0x%" PRIx64 " data 0x%" PRIx32 " size %u"
|
|
|
|
# heathrow_pic.c
|
|
heathrow_write(uint64_t addr, unsigned int n, uint64_t value) "0x%"PRIx64" %u: 0x%"PRIx64
|
|
heathrow_read(uint64_t addr, unsigned int n, uint64_t value) "0x%"PRIx64" %u: 0x%"PRIx64
|
|
heathrow_set_irq(int num, int level) "set_irq: num=0x%02x level=%d"
|
|
|
|
# bcm2835_ic.c
|
|
bcm2835_ic_set_gpu_irq(int irq, int level) "GPU irq #%d level %d"
|
|
bcm2835_ic_set_cpu_irq(int irq, int level) "CPU irq #%d level %d"
|
|
|
|
# spapr_xive.c
|
|
spapr_xive_claim_irq(uint32_t lisn, bool lsi) "lisn=0x%x lsi=%d"
|
|
spapr_xive_free_irq(uint32_t lisn) "lisn=0x%x"
|
|
spapr_xive_set_irq(uint32_t lisn, uint32_t val) "lisn=0x%x val=%d"
|
|
spapr_xive_get_source_info(uint64_t flags, uint64_t lisn) "flags=0x%"PRIx64" lisn=0x%"PRIx64
|
|
spapr_xive_set_source_config(uint64_t flags, uint64_t lisn, uint64_t target, uint64_t priority, uint64_t eisn) "flags=0x%"PRIx64" lisn=0x%"PRIx64" target=0x%"PRIx64" priority=0x%"PRIx64" eisn=0x%"PRIx64
|
|
spapr_xive_get_source_config(uint64_t flags, uint64_t lisn) "flags=0x%"PRIx64" lisn=0x%"PRIx64
|
|
spapr_xive_get_queue_info(uint64_t flags, uint64_t target, uint64_t priority) "flags=0x%"PRIx64" target=0x%"PRIx64" priority=0x%"PRIx64
|
|
spapr_xive_set_queue_config(uint64_t flags, uint64_t target, uint64_t priority, uint64_t qpage, uint64_t qsize) "flags=0x%"PRIx64" target=0x%"PRIx64" priority=0x%"PRIx64" qpage=0x%"PRIx64" qsize=0x%"PRIx64
|
|
spapr_xive_get_queue_config(uint64_t flags, uint64_t target, uint64_t priority) "flags=0x%"PRIx64" target=0x%"PRIx64" priority=0x%"PRIx64
|
|
spapr_xive_set_os_reporting_line(uint64_t flags) "flags=0x%"PRIx64
|
|
spapr_xive_get_os_reporting_line(uint64_t flags) "flags=0x%"PRIx64
|
|
spapr_xive_esb(uint64_t flags, uint64_t lisn, uint64_t offset, uint64_t data) "flags=0x%"PRIx64" lisn=0x%"PRIx64" offset=0x%"PRIx64" data=0x%"PRIx64
|
|
spapr_xive_sync(uint64_t flags, uint64_t lisn) "flags=0x%"PRIx64" lisn=0x%"PRIx64
|
|
spapr_xive_reset(uint64_t flags) "flags=0x%"PRIx64
|
|
|
|
# spapr_xive_kvm.c
|
|
kvm_xive_cpu_connect(uint32_t id) "connect CPU%d to KVM device"
|
|
kvm_xive_source_reset(uint32_t srcno) "IRQ 0x%x"
|
|
|
|
# xive.c
|
|
xive_tctx_accept(uint32_t index, uint8_t ring, uint8_t ipb, uint8_t pipr, uint8_t cppr, uint8_t nsr) "target=%d ring=0x%x IBP=0x%02x PIPR=0x%02x CPPR=0x%02x NSR=0x%02x ACK"
|
|
xive_tctx_notify(uint32_t index, uint8_t ring, uint8_t ipb, uint8_t pipr, uint8_t cppr, uint8_t nsr) "target=%d ring=0x%x IBP=0x%02x PIPR=0x%02x CPPR=0x%02x NSR=0x%02x raise !"
|
|
xive_tctx_set_cppr(uint32_t index, uint8_t ring, uint8_t ipb, uint8_t pipr, uint8_t cppr, uint8_t nsr) "target=%d ring=0x%x IBP=0x%02x PIPR=0x%02x new CPPR=0x%02x NSR=0x%02x"
|
|
xive_source_esb_read(uint64_t addr, uint32_t srcno, uint64_t value) "@0x%"PRIx64" IRQ 0x%x val=0x%"PRIx64
|
|
xive_source_esb_write(uint64_t addr, uint32_t srcno, uint64_t value) "@0x%"PRIx64" IRQ 0x%x val=0x%"PRIx64
|
|
xive_router_end_notify(uint8_t end_blk, uint32_t end_idx, uint32_t end_data) "END 0x%02x/0x%04x -> enqueue 0x%08x"
|
|
xive_router_end_escalate(uint8_t end_blk, uint32_t end_idx, uint8_t esc_blk, uint32_t esc_idx, uint32_t end_data) "END 0x%02x/0x%04x -> escalate END 0x%02x/0x%04x data 0x%08x"
|
|
xive_tctx_tm_write(uint64_t offset, unsigned int size, uint64_t value) "@0x%"PRIx64" sz=%d val=0x%" PRIx64
|
|
xive_tctx_tm_read(uint64_t offset, unsigned int size, uint64_t value) "@0x%"PRIx64" sz=%d val=0x%" PRIx64
|
|
xive_presenter_notify(uint8_t nvt_blk, uint32_t nvt_idx, uint8_t ring) "found NVT 0x%x/0x%x ring=0x%x"
|
|
xive_end_source_read(uint8_t end_blk, uint32_t end_idx, uint64_t addr) "END 0x%x/0x%x @0x%"PRIx64
|
|
|
|
# pnv_xive.c
|
|
pnv_xive_ic_hw_trigger(uint64_t addr, uint64_t val) "@0x%"PRIx64" val=0x%"PRIx64
|
|
|
|
# goldfish_pic.c
|
|
goldfish_irq_request(void *dev, int idx, int irq, int level) "pic: %p goldfish-irq.%d irq: %d level: %d"
|
|
goldfish_pic_read(void *dev, int idx, unsigned int addr, unsigned int size, uint64_t value) "pic: %p goldfish-irq.%d reg: 0x%02x size: %d value: 0x%"PRIx64
|
|
goldfish_pic_write(void *dev, int idx, unsigned int addr, unsigned int size, uint64_t value) "pic: %p goldfish-irq.%d reg: 0x%02x size: %d value: 0x%"PRIx64
|
|
goldfish_pic_reset(void *dev, int idx) "pic: %p goldfish-irq.%d"
|
|
goldfish_pic_realize(void *dev, int idx) "pic: %p goldfish-irq.%d"
|
|
goldfish_pic_instance_init(void *dev) "pic: %p goldfish-irq"
|
|
|
|
# sh_intc.c
|
|
sh_intc_sources(int p, int a, int c, int m, unsigned short v, const char *s1, const char *s2, const char *s3) "(%d/%d/%d/%d) interrupt source 0x%x %s%s%s"
|
|
sh_intc_pending(int p, unsigned short v) "(%d) returning interrupt source 0x%x"
|
|
sh_intc_register(const char *s, int id, unsigned short v, int c, int m) "%s %u -> 0x%04x (%d/%d)"
|
|
sh_intc_read(unsigned size, uint64_t offset, unsigned long val) "size %u 0x%" PRIx64 " -> 0x%lx"
|
|
sh_intc_write(unsigned size, uint64_t offset, unsigned long val) "size %u 0x%" PRIx64 " <- 0x%lx"
|
|
sh_intc_set(int id, int enable) "setting interrupt group %d to %d"
|