mirrors/qemu
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
9db7c41419
qemu/hw/arm_sysctl.c
Christoffer Dall 706872a566 hw/arm_sysctl: Clear sysctl cfgctrl start bit 
The start bit should only be set to indicate that a function call is
underway, right now.  When done with function, clear it.

Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-01-30 15:39:01 +00:00

429 lines
12 KiB
C
Raw Blame History

/*
* Status and system control registers for ARM RealView/Versatile boards.
*
* Copyright (c) 2006-2007 CodeSourcery.
* Written by Paul Brook
*
* This code is licensed under the GPL.
*/
#include "hw.h"
#include "qemu/timer.h"
#include "sysbus.h"
#include "primecell.h"
#include "sysemu/sysemu.h"
#define LOCK_VALUE 0xa05f
typedef struct {
SysBusDevice busdev;
MemoryRegion iomem;
qemu_irq pl110_mux_ctrl;
uint32_t sys_id;
uint32_t leds;
uint16_t lockval;
uint32_t cfgdata1;
uint32_t cfgdata2;
uint32_t flags;
uint32_t nvflags;
uint32_t resetlevel;
uint32_t proc_id;
uint32_t sys_mci;
uint32_t sys_cfgdata;
uint32_t sys_cfgctrl;
uint32_t sys_cfgstat;
uint32_t sys_clcd;
} arm_sysctl_state;
static const VMStateDescription vmstate_arm_sysctl = {
.name = "realview_sysctl",
.version_id = 3,
.minimum_version_id = 1,
.fields = (VMStateField[]) {
VMSTATE_UINT32(leds, arm_sysctl_state),
VMSTATE_UINT16(lockval, arm_sysctl_state),
VMSTATE_UINT32(cfgdata1, arm_sysctl_state),
VMSTATE_UINT32(cfgdata2, arm_sysctl_state),
VMSTATE_UINT32(flags, arm_sysctl_state),
VMSTATE_UINT32(nvflags, arm_sysctl_state),
VMSTATE_UINT32(resetlevel, arm_sysctl_state),
VMSTATE_UINT32_V(sys_mci, arm_sysctl_state, 2),
VMSTATE_UINT32_V(sys_cfgdata, arm_sysctl_state, 2),
VMSTATE_UINT32_V(sys_cfgctrl, arm_sysctl_state, 2),
VMSTATE_UINT32_V(sys_cfgstat, arm_sysctl_state, 2),
VMSTATE_UINT32_V(sys_clcd, arm_sysctl_state, 3),
VMSTATE_END_OF_LIST()
}
};
/* The PB926 actually uses a different format for
* its SYS_ID register. Fortunately the bits which are
* board type on later boards are distinct.
*/
#define BOARD_ID_PB926 0x100
#define BOARD_ID_EB 0x140
#define BOARD_ID_PBA8 0x178
#define BOARD_ID_PBX 0x182
#define BOARD_ID_VEXPRESS 0x190
static int board_id(arm_sysctl_state *s)
{
/* Extract the board ID field from the SYS_ID register value */
return (s->sys_id >> 16) & 0xfff;
}
static void arm_sysctl_reset(DeviceState *d)
{
arm_sysctl_state *s = FROM_SYSBUS(arm_sysctl_state, SYS_BUS_DEVICE(d));
s->leds = 0;
s->lockval = 0;
s->cfgdata1 = 0;
s->cfgdata2 = 0;
s->flags = 0;
s->resetlevel = 0;
if (board_id(s) == BOARD_ID_VEXPRESS) {
/* On VExpress this register will RAZ/WI */
s->sys_clcd = 0;
} else {
/* All others: CLCDID 0x1f, indicating VGA */
s->sys_clcd = 0x1f00;
}
}
static uint64_t arm_sysctl_read(void *opaque, hwaddr offset,
unsigned size)
{
arm_sysctl_state *s = (arm_sysctl_state *)opaque;
switch (offset) {
case 0x00: /* ID */
return s->sys_id;
case 0x04: /* SW */
/* General purpose hardware switches.
We don't have a useful way of exposing these to the user. */
return 0;
case 0x08: /* LED */
return s->leds;
case 0x20: /* LOCK */
return s->lockval;
case 0x0c: /* OSC0 */
case 0x10: /* OSC1 */
case 0x14: /* OSC2 */
case 0x18: /* OSC3 */
case 0x1c: /* OSC4 */
case 0x24: /* 100HZ */
/* ??? Implement these. */
return 0;
case 0x28: /* CFGDATA1 */
return s->cfgdata1;
case 0x2c: /* CFGDATA2 */
return s->cfgdata2;
case 0x30: /* FLAGS */
return s->flags;
case 0x38: /* NVFLAGS */
return s->nvflags;
case 0x40: /* RESETCTL */
if (board_id(s) == BOARD_ID_VEXPRESS) {
/* reserved: RAZ/WI */
return 0;
}
return s->resetlevel;
case 0x44: /* PCICTL */
return 1;
case 0x48: /* MCI */
return s->sys_mci;
case 0x4c: /* FLASH */
return 0;
case 0x50: /* CLCD */
return s->sys_clcd;
case 0x54: /* CLCDSER */
return 0;
case 0x58: /* BOOTCS */
return 0;
case 0x5c: /* 24MHz */
return muldiv64(qemu_get_clock_ns(vm_clock), 24000000, get_ticks_per_sec());
case 0x60: /* MISC */
return 0;
case 0x84: /* PROCID0 */
return s->proc_id;
case 0x88: /* PROCID1 */
return 0xff000000;
case 0x64: /* DMAPSR0 */
case 0x68: /* DMAPSR1 */
case 0x6c: /* DMAPSR2 */
case 0x70: /* IOSEL */
case 0x74: /* PLDCTL */
case 0x80: /* BUSID */
case 0x8c: /* OSCRESET0 */
case 0x90: /* OSCRESET1 */
case 0x94: /* OSCRESET2 */
case 0x98: /* OSCRESET3 */
case 0x9c: /* OSCRESET4 */
case 0xc0: /* SYS_TEST_OSC0 */
case 0xc4: /* SYS_TEST_OSC1 */
case 0xc8: /* SYS_TEST_OSC2 */
case 0xcc: /* SYS_TEST_OSC3 */
case 0xd0: /* SYS_TEST_OSC4 */
return 0;
case 0xa0: /* SYS_CFGDATA */
if (board_id(s) != BOARD_ID_VEXPRESS) {
goto bad_reg;
}
return s->sys_cfgdata;
case 0xa4: /* SYS_CFGCTRL */
if (board_id(s) != BOARD_ID_VEXPRESS) {
goto bad_reg;
}
return s->sys_cfgctrl;
case 0xa8: /* SYS_CFGSTAT */
if (board_id(s) != BOARD_ID_VEXPRESS) {
goto bad_reg;
}
return s->sys_cfgstat;
default:
bad_reg:
qemu_log_mask(LOG_GUEST_ERROR,
"arm_sysctl_read: Bad register offset 0x%x\n",
(int)offset);
return 0;
}
}
static void arm_sysctl_write(void *opaque, hwaddr offset,
uint64_t val, unsigned size)
{
arm_sysctl_state *s = (arm_sysctl_state *)opaque;
switch (offset) {
case 0x08: /* LED */
s->leds = val;
break;
case 0x0c: /* OSC0 */
case 0x10: /* OSC1 */
case 0x14: /* OSC2 */
case 0x18: /* OSC3 */
case 0x1c: /* OSC4 */
/* ??? */
break;
case 0x20: /* LOCK */
if (val == LOCK_VALUE)
s->lockval = val;
else
s->lockval = val & 0x7fff;
break;
case 0x28: /* CFGDATA1 */
/* ??? Need to implement this. */
s->cfgdata1 = val;
break;
case 0x2c: /* CFGDATA2 */
/* ??? Need to implement this. */
s->cfgdata2 = val;
break;
case 0x30: /* FLAGSSET */
s->flags |= val;
break;
case 0x34: /* FLAGSCLR */
s->flags &= ~val;
break;
case 0x38: /* NVFLAGSSET */
s->nvflags |= val;
break;
case 0x3c: /* NVFLAGSCLR */
s->nvflags &= ~val;
break;
case 0x40: /* RESETCTL */
switch (board_id(s)) {
case BOARD_ID_PB926:
if (s->lockval == LOCK_VALUE) {
s->resetlevel = val;
if (val & 0x100) {
qemu_system_reset_request();
}
}
break;
case BOARD_ID_PBX:
case BOARD_ID_PBA8:
if (s->lockval == LOCK_VALUE) {
s->resetlevel = val;
if (val & 0x04) {
qemu_system_reset_request();
}
}
break;
case BOARD_ID_VEXPRESS:
case BOARD_ID_EB:
default:
/* reserved: RAZ/WI */
break;
}
break;
case 0x44: /* PCICTL */
/* nothing to do. */
break;
case 0x4c: /* FLASH */
break;
case 0x50: /* CLCD */
switch (board_id(s)) {
case BOARD_ID_PB926:
/* On 926 bits 13:8 are R/O, bits 1:0 control
* the mux that defines how to interpret the PL110
* graphics format, and other bits are r/w but we
* don't implement them to do anything.
*/
s->sys_clcd &= 0x3f00;
s->sys_clcd |= val & ~0x3f00;
qemu_set_irq(s->pl110_mux_ctrl, val & 3);
break;
case BOARD_ID_EB:
/* The EB is the same except that there is no mux since
* the EB has a PL111.
*/
s->sys_clcd &= 0x3f00;
s->sys_clcd |= val & ~0x3f00;
break;
case BOARD_ID_PBA8:
case BOARD_ID_PBX:
/* On PBA8 and PBX bit 7 is r/w and all other bits
* are either r/o or RAZ/WI.
*/
s->sys_clcd &= (1 << 7);
s->sys_clcd |= val & ~(1 << 7);
break;
case BOARD_ID_VEXPRESS:
default:
/* On VExpress this register is unimplemented and will RAZ/WI */
break;
}
break;
case 0x54: /* CLCDSER */
case 0x64: /* DMAPSR0 */
case 0x68: /* DMAPSR1 */
case 0x6c: /* DMAPSR2 */
case 0x70: /* IOSEL */
case 0x74: /* PLDCTL */
case 0x80: /* BUSID */
case 0x84: /* PROCID0 */
case 0x88: /* PROCID1 */
case 0x8c: /* OSCRESET0 */
case 0x90: /* OSCRESET1 */
case 0x94: /* OSCRESET2 */
case 0x98: /* OSCRESET3 */
case 0x9c: /* OSCRESET4 */
break;
case 0xa0: /* SYS_CFGDATA */
if (board_id(s) != BOARD_ID_VEXPRESS) {
goto bad_reg;
}
s->sys_cfgdata = val;
return;
case 0xa4: /* SYS_CFGCTRL */
if (board_id(s) != BOARD_ID_VEXPRESS) {
goto bad_reg;
}
s->sys_cfgctrl = val & ~(3 << 18);
s->sys_cfgstat = 1; /* complete */
switch (s->sys_cfgctrl) {
case 0xc0800000: /* SYS_CFG_SHUTDOWN to motherboard */
qemu_system_shutdown_request();
break;
case 0xc0900000: /* SYS_CFG_REBOOT to motherboard */
qemu_system_reset_request();
break;
default:
s->sys_cfgstat |= 2; /* error */
}
s->sys_cfgctrl &= ~(1 << 31);
return;
case 0xa8: /* SYS_CFGSTAT */
if (board_id(s) != BOARD_ID_VEXPRESS) {
goto bad_reg;
}
s->sys_cfgstat = val & 3;
return;
default:
bad_reg:
qemu_log_mask(LOG_GUEST_ERROR,
"arm_sysctl_write: Bad register offset 0x%x\n",
(int)offset);
return;
}
}
static const MemoryRegionOps arm_sysctl_ops = {
.read = arm_sysctl_read,
.write = arm_sysctl_write,
.endianness = DEVICE_NATIVE_ENDIAN,
};
static void arm_sysctl_gpio_set(void *opaque, int line, int level)
{
arm_sysctl_state *s = (arm_sysctl_state *)opaque;
switch (line) {
case ARM_SYSCTL_GPIO_MMC_WPROT:
{
/* For PB926 and EB write-protect is bit 2 of SYS_MCI;
* for all later boards it is bit 1.
*/
int bit = 2;
if ((board_id(s) == BOARD_ID_PB926) || (board_id(s) == BOARD_ID_EB)) {
bit = 4;
}
s->sys_mci &= ~bit;
if (level) {
s->sys_mci |= bit;
}
break;
}
case ARM_SYSCTL_GPIO_MMC_CARDIN:
s->sys_mci &= ~1;
if (level) {
s->sys_mci |= 1;
}
break;
}
}
static int arm_sysctl_init(SysBusDevice *dev)
{
arm_sysctl_state *s = FROM_SYSBUS(arm_sysctl_state, dev);
memory_region_init_io(&s->iomem, &arm_sysctl_ops, s, "arm-sysctl", 0x1000);
sysbus_init_mmio(dev, &s->iomem);
qdev_init_gpio_in(&s->busdev.qdev, arm_sysctl_gpio_set, 2);
qdev_init_gpio_out(&s->busdev.qdev, &s->pl110_mux_ctrl, 1);
return 0;
}
static Property arm_sysctl_properties[] = {
DEFINE_PROP_UINT32("sys_id", arm_sysctl_state, sys_id, 0),
DEFINE_PROP_UINT32("proc_id", arm_sysctl_state, proc_id, 0),
DEFINE_PROP_END_OF_LIST(),
};
static void arm_sysctl_class_init(ObjectClass *klass, void *data)
{
DeviceClass *dc = DEVICE_CLASS(klass);
SysBusDeviceClass *k = SYS_BUS_DEVICE_CLASS(klass);
k->init = arm_sysctl_init;
dc->reset = arm_sysctl_reset;
dc->vmsd = &vmstate_arm_sysctl;
dc->props = arm_sysctl_properties;
}
static const TypeInfo arm_sysctl_info = {
.name = "realview_sysctl",
.parent = TYPE_SYS_BUS_DEVICE,
.instance_size = sizeof(arm_sysctl_state),
.class_init = arm_sysctl_class_init,
};
static void arm_sysctl_register_types(void)
{
type_register_static(&arm_sysctl_info);
}
type_init(arm_sysctl_register_types)
Reference in New Issue View Git Blame Copy Permalink