478dccbb99
In check_s2_mmu_setup() we have a check that is attempting to implement the part of AArch64.S2MinTxSZ that is specific to when EL1 is AArch32: if !s1aarch64 then // EL1 is AArch32 min_txsz = Min(min_txsz, 24); Unfortunately we got this wrong in two ways: (1) The minimum txsz corresponds to a maximum inputsize, but we got the sense of the comparison wrong and were faulting for all inputsizes less than 40 bits (2) We try to implement this as an extra check that happens after we've done the same txsz checks we would do for an AArch64 EL1, but in fact the pseudocode is *loosening* the requirements, so that txsz values that would fault for an AArch64 EL1 do not fault for AArch32 EL1, because it does Min(old_min, 24), not Max(old_min, 24). You can see this also in the text of the Arm ARM in table D8-8, which shows that where the implemented PA size is less than 40 bits an AArch32 EL1 is still OK with a configured stage2 T0SZ for a 40 bit IPA, whereas if EL1 is AArch64 then the T0SZ must be big enough to constrain the IPA to the implemented PA size. Because of part (2), we can't do this as a separate check, but have to integrate it into aa64_va_parameters(). Add a new argument to that function to indicate that EL1 is 32-bit. All the existing callsites except the one in get_phys_addr_lpae() can pass 'false', because they are either doing a lookup for a stage 1 regime or else they don't care about the tsz/tsz_oob fields. Cc: qemu-stable@nongnu.org Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1627 Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230509092059.3176487-1-peter.maydell@linaro.org
3049 lines
100 KiB
C
3049 lines
100 KiB
C
/*
|
|
* ARM page table walking.
|
|
*
|
|
* This code is licensed under the GNU GPL v2 or later.
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0-or-later
|
|
*/
|
|
|
|
#include "qemu/osdep.h"
|
|
#include "qemu/log.h"
|
|
#include "qemu/range.h"
|
|
#include "qemu/main-loop.h"
|
|
#include "exec/exec-all.h"
|
|
#include "cpu.h"
|
|
#include "internals.h"
|
|
#include "idau.h"
|
|
|
|
|
|
typedef struct S1Translate {
|
|
ARMMMUIdx in_mmu_idx;
|
|
ARMMMUIdx in_ptw_idx;
|
|
bool in_secure;
|
|
bool in_debug;
|
|
bool out_secure;
|
|
bool out_rw;
|
|
bool out_be;
|
|
hwaddr out_virt;
|
|
hwaddr out_phys;
|
|
void *out_host;
|
|
} S1Translate;
|
|
|
|
static bool get_phys_addr_lpae(CPUARMState *env, S1Translate *ptw,
|
|
uint64_t address,
|
|
MMUAccessType access_type, bool s1_is_el0,
|
|
GetPhysAddrResult *result, ARMMMUFaultInfo *fi)
|
|
__attribute__((nonnull));
|
|
|
|
static bool get_phys_addr_with_struct(CPUARMState *env, S1Translate *ptw,
|
|
target_ulong address,
|
|
MMUAccessType access_type,
|
|
GetPhysAddrResult *result,
|
|
ARMMMUFaultInfo *fi)
|
|
__attribute__((nonnull));
|
|
|
|
/* This mapping is common between ID_AA64MMFR0.PARANGE and TCR_ELx.{I}PS. */
|
|
static const uint8_t pamax_map[] = {
|
|
[0] = 32,
|
|
[1] = 36,
|
|
[2] = 40,
|
|
[3] = 42,
|
|
[4] = 44,
|
|
[5] = 48,
|
|
[6] = 52,
|
|
};
|
|
|
|
/* The cpu-specific constant value of PAMax; also used by hw/arm/virt. */
|
|
unsigned int arm_pamax(ARMCPU *cpu)
|
|
{
|
|
if (arm_feature(&cpu->env, ARM_FEATURE_AARCH64)) {
|
|
unsigned int parange =
|
|
FIELD_EX64(cpu->isar.id_aa64mmfr0, ID_AA64MMFR0, PARANGE);
|
|
|
|
/*
|
|
* id_aa64mmfr0 is a read-only register so values outside of the
|
|
* supported mappings can be considered an implementation error.
|
|
*/
|
|
assert(parange < ARRAY_SIZE(pamax_map));
|
|
return pamax_map[parange];
|
|
}
|
|
|
|
/*
|
|
* In machvirt_init, we call arm_pamax on a cpu that is not fully
|
|
* initialized, so we can't rely on the propagation done in realize.
|
|
*/
|
|
if (arm_feature(&cpu->env, ARM_FEATURE_LPAE) ||
|
|
arm_feature(&cpu->env, ARM_FEATURE_V7VE)) {
|
|
/* v7 with LPAE */
|
|
return 40;
|
|
}
|
|
/* Anything else */
|
|
return 32;
|
|
}
|
|
|
|
/*
|
|
* Convert a possible stage1+2 MMU index into the appropriate stage 1 MMU index
|
|
*/
|
|
ARMMMUIdx stage_1_mmu_idx(ARMMMUIdx mmu_idx)
|
|
{
|
|
switch (mmu_idx) {
|
|
case ARMMMUIdx_E10_0:
|
|
return ARMMMUIdx_Stage1_E0;
|
|
case ARMMMUIdx_E10_1:
|
|
return ARMMMUIdx_Stage1_E1;
|
|
case ARMMMUIdx_E10_1_PAN:
|
|
return ARMMMUIdx_Stage1_E1_PAN;
|
|
default:
|
|
return mmu_idx;
|
|
}
|
|
}
|
|
|
|
ARMMMUIdx arm_stage1_mmu_idx(CPUARMState *env)
|
|
{
|
|
return stage_1_mmu_idx(arm_mmu_idx(env));
|
|
}
|
|
|
|
/*
|
|
* Return where we should do ptw loads from for a stage 2 walk.
|
|
* This depends on whether the address we are looking up is a
|
|
* Secure IPA or a NonSecure IPA, which we know from whether this is
|
|
* Stage2 or Stage2_S.
|
|
* If this is the Secure EL1&0 regime we need to check the NSW and SW bits.
|
|
*/
|
|
static ARMMMUIdx ptw_idx_for_stage_2(CPUARMState *env, ARMMMUIdx stage2idx)
|
|
{
|
|
bool s2walk_secure;
|
|
|
|
/*
|
|
* We're OK to check the current state of the CPU here because
|
|
* (1) we always invalidate all TLBs when the SCR_EL3.NS bit changes
|
|
* (2) there's no way to do a lookup that cares about Stage 2 for a
|
|
* different security state to the current one for AArch64, and AArch32
|
|
* never has a secure EL2. (AArch32 ATS12NSO[UP][RW] allow EL3 to do
|
|
* an NS stage 1+2 lookup while the NS bit is 0.)
|
|
*/
|
|
if (!arm_is_secure_below_el3(env) || !arm_el_is_aa64(env, 3)) {
|
|
return ARMMMUIdx_Phys_NS;
|
|
}
|
|
if (stage2idx == ARMMMUIdx_Stage2_S) {
|
|
s2walk_secure = !(env->cp15.vstcr_el2 & VSTCR_SW);
|
|
} else {
|
|
s2walk_secure = !(env->cp15.vtcr_el2 & VTCR_NSW);
|
|
}
|
|
return s2walk_secure ? ARMMMUIdx_Phys_S : ARMMMUIdx_Phys_NS;
|
|
|
|
}
|
|
|
|
static bool regime_translation_big_endian(CPUARMState *env, ARMMMUIdx mmu_idx)
|
|
{
|
|
return (regime_sctlr(env, mmu_idx) & SCTLR_EE) != 0;
|
|
}
|
|
|
|
/* Return the TTBR associated with this translation regime */
|
|
static uint64_t regime_ttbr(CPUARMState *env, ARMMMUIdx mmu_idx, int ttbrn)
|
|
{
|
|
if (mmu_idx == ARMMMUIdx_Stage2) {
|
|
return env->cp15.vttbr_el2;
|
|
}
|
|
if (mmu_idx == ARMMMUIdx_Stage2_S) {
|
|
return env->cp15.vsttbr_el2;
|
|
}
|
|
if (ttbrn == 0) {
|
|
return env->cp15.ttbr0_el[regime_el(env, mmu_idx)];
|
|
} else {
|
|
return env->cp15.ttbr1_el[regime_el(env, mmu_idx)];
|
|
}
|
|
}
|
|
|
|
/* Return true if the specified stage of address translation is disabled */
|
|
static bool regime_translation_disabled(CPUARMState *env, ARMMMUIdx mmu_idx,
|
|
bool is_secure)
|
|
{
|
|
uint64_t hcr_el2;
|
|
|
|
if (arm_feature(env, ARM_FEATURE_M)) {
|
|
switch (env->v7m.mpu_ctrl[is_secure] &
|
|
(R_V7M_MPU_CTRL_ENABLE_MASK | R_V7M_MPU_CTRL_HFNMIENA_MASK)) {
|
|
case R_V7M_MPU_CTRL_ENABLE_MASK:
|
|
/* Enabled, but not for HardFault and NMI */
|
|
return mmu_idx & ARM_MMU_IDX_M_NEGPRI;
|
|
case R_V7M_MPU_CTRL_ENABLE_MASK | R_V7M_MPU_CTRL_HFNMIENA_MASK:
|
|
/* Enabled for all cases */
|
|
return false;
|
|
case 0:
|
|
default:
|
|
/*
|
|
* HFNMIENA set and ENABLE clear is UNPREDICTABLE, but
|
|
* we warned about that in armv7m_nvic.c when the guest set it.
|
|
*/
|
|
return true;
|
|
}
|
|
}
|
|
|
|
hcr_el2 = arm_hcr_el2_eff_secstate(env, is_secure);
|
|
|
|
switch (mmu_idx) {
|
|
case ARMMMUIdx_Stage2:
|
|
case ARMMMUIdx_Stage2_S:
|
|
/* HCR.DC means HCR.VM behaves as 1 */
|
|
return (hcr_el2 & (HCR_DC | HCR_VM)) == 0;
|
|
|
|
case ARMMMUIdx_E10_0:
|
|
case ARMMMUIdx_E10_1:
|
|
case ARMMMUIdx_E10_1_PAN:
|
|
/* TGE means that EL0/1 act as if SCTLR_EL1.M is zero */
|
|
if (hcr_el2 & HCR_TGE) {
|
|
return true;
|
|
}
|
|
break;
|
|
|
|
case ARMMMUIdx_Stage1_E0:
|
|
case ARMMMUIdx_Stage1_E1:
|
|
case ARMMMUIdx_Stage1_E1_PAN:
|
|
/* HCR.DC means SCTLR_EL1.M behaves as 0 */
|
|
if (hcr_el2 & HCR_DC) {
|
|
return true;
|
|
}
|
|
break;
|
|
|
|
case ARMMMUIdx_E20_0:
|
|
case ARMMMUIdx_E20_2:
|
|
case ARMMMUIdx_E20_2_PAN:
|
|
case ARMMMUIdx_E2:
|
|
case ARMMMUIdx_E3:
|
|
break;
|
|
|
|
case ARMMMUIdx_Phys_NS:
|
|
case ARMMMUIdx_Phys_S:
|
|
/* No translation for physical address spaces. */
|
|
return true;
|
|
|
|
default:
|
|
g_assert_not_reached();
|
|
}
|
|
|
|
return (regime_sctlr(env, mmu_idx) & SCTLR_M) == 0;
|
|
}
|
|
|
|
static bool S2_attrs_are_device(uint64_t hcr, uint8_t attrs)
|
|
{
|
|
/*
|
|
* For an S1 page table walk, the stage 1 attributes are always
|
|
* some form of "this is Normal memory". The combined S1+S2
|
|
* attributes are therefore only Device if stage 2 specifies Device.
|
|
* With HCR_EL2.FWB == 0 this is when descriptor bits [5:4] are 0b00,
|
|
* ie when cacheattrs.attrs bits [3:2] are 0b00.
|
|
* With HCR_EL2.FWB == 1 this is when descriptor bit [4] is 0, ie
|
|
* when cacheattrs.attrs bit [2] is 0.
|
|
*/
|
|
if (hcr & HCR_FWB) {
|
|
return (attrs & 0x4) == 0;
|
|
} else {
|
|
return (attrs & 0xc) == 0;
|
|
}
|
|
}
|
|
|
|
/* Translate a S1 pagetable walk through S2 if needed. */
|
|
static bool S1_ptw_translate(CPUARMState *env, S1Translate *ptw,
|
|
hwaddr addr, ARMMMUFaultInfo *fi)
|
|
{
|
|
bool is_secure = ptw->in_secure;
|
|
ARMMMUIdx mmu_idx = ptw->in_mmu_idx;
|
|
ARMMMUIdx s2_mmu_idx = ptw->in_ptw_idx;
|
|
uint8_t pte_attrs;
|
|
|
|
ptw->out_virt = addr;
|
|
|
|
if (unlikely(ptw->in_debug)) {
|
|
/*
|
|
* From gdbstub, do not use softmmu so that we don't modify the
|
|
* state of the cpu at all, including softmmu tlb contents.
|
|
*/
|
|
if (regime_is_stage2(s2_mmu_idx)) {
|
|
S1Translate s2ptw = {
|
|
.in_mmu_idx = s2_mmu_idx,
|
|
.in_ptw_idx = ptw_idx_for_stage_2(env, s2_mmu_idx),
|
|
.in_secure = s2_mmu_idx == ARMMMUIdx_Stage2_S,
|
|
.in_debug = true,
|
|
};
|
|
GetPhysAddrResult s2 = { };
|
|
|
|
if (get_phys_addr_lpae(env, &s2ptw, addr, MMU_DATA_LOAD,
|
|
false, &s2, fi)) {
|
|
goto fail;
|
|
}
|
|
ptw->out_phys = s2.f.phys_addr;
|
|
pte_attrs = s2.cacheattrs.attrs;
|
|
ptw->out_secure = s2.f.attrs.secure;
|
|
} else {
|
|
/* Regime is physical. */
|
|
ptw->out_phys = addr;
|
|
pte_attrs = 0;
|
|
ptw->out_secure = s2_mmu_idx == ARMMMUIdx_Phys_S;
|
|
}
|
|
ptw->out_host = NULL;
|
|
ptw->out_rw = false;
|
|
} else {
|
|
#ifdef CONFIG_TCG
|
|
CPUTLBEntryFull *full;
|
|
int flags;
|
|
|
|
env->tlb_fi = fi;
|
|
flags = probe_access_full(env, addr, 0, MMU_DATA_LOAD,
|
|
arm_to_core_mmu_idx(s2_mmu_idx),
|
|
true, &ptw->out_host, &full, 0);
|
|
env->tlb_fi = NULL;
|
|
|
|
if (unlikely(flags & TLB_INVALID_MASK)) {
|
|
goto fail;
|
|
}
|
|
ptw->out_phys = full->phys_addr | (addr & ~TARGET_PAGE_MASK);
|
|
ptw->out_rw = full->prot & PAGE_WRITE;
|
|
pte_attrs = full->pte_attrs;
|
|
ptw->out_secure = full->attrs.secure;
|
|
#else
|
|
g_assert_not_reached();
|
|
#endif
|
|
}
|
|
|
|
if (regime_is_stage2(s2_mmu_idx)) {
|
|
uint64_t hcr = arm_hcr_el2_eff_secstate(env, is_secure);
|
|
|
|
if ((hcr & HCR_PTW) && S2_attrs_are_device(hcr, pte_attrs)) {
|
|
/*
|
|
* PTW set and S1 walk touched S2 Device memory:
|
|
* generate Permission fault.
|
|
*/
|
|
fi->type = ARMFault_Permission;
|
|
fi->s2addr = addr;
|
|
fi->stage2 = true;
|
|
fi->s1ptw = true;
|
|
fi->s1ns = !is_secure;
|
|
return false;
|
|
}
|
|
}
|
|
|
|
ptw->out_be = regime_translation_big_endian(env, mmu_idx);
|
|
return true;
|
|
|
|
fail:
|
|
assert(fi->type != ARMFault_None);
|
|
fi->s2addr = addr;
|
|
fi->stage2 = true;
|
|
fi->s1ptw = true;
|
|
fi->s1ns = !is_secure;
|
|
return false;
|
|
}
|
|
|
|
/* All loads done in the course of a page table walk go through here. */
|
|
static uint32_t arm_ldl_ptw(CPUARMState *env, S1Translate *ptw,
|
|
ARMMMUFaultInfo *fi)
|
|
{
|
|
CPUState *cs = env_cpu(env);
|
|
void *host = ptw->out_host;
|
|
uint32_t data;
|
|
|
|
if (likely(host)) {
|
|
/* Page tables are in RAM, and we have the host address. */
|
|
data = qatomic_read((uint32_t *)host);
|
|
if (ptw->out_be) {
|
|
data = be32_to_cpu(data);
|
|
} else {
|
|
data = le32_to_cpu(data);
|
|
}
|
|
} else {
|
|
/* Page tables are in MMIO. */
|
|
MemTxAttrs attrs = { .secure = ptw->out_secure };
|
|
AddressSpace *as = arm_addressspace(cs, attrs);
|
|
MemTxResult result = MEMTX_OK;
|
|
|
|
if (ptw->out_be) {
|
|
data = address_space_ldl_be(as, ptw->out_phys, attrs, &result);
|
|
} else {
|
|
data = address_space_ldl_le(as, ptw->out_phys, attrs, &result);
|
|
}
|
|
if (unlikely(result != MEMTX_OK)) {
|
|
fi->type = ARMFault_SyncExternalOnWalk;
|
|
fi->ea = arm_extabort_type(result);
|
|
return 0;
|
|
}
|
|
}
|
|
return data;
|
|
}
|
|
|
|
static uint64_t arm_ldq_ptw(CPUARMState *env, S1Translate *ptw,
|
|
ARMMMUFaultInfo *fi)
|
|
{
|
|
CPUState *cs = env_cpu(env);
|
|
void *host = ptw->out_host;
|
|
uint64_t data;
|
|
|
|
if (likely(host)) {
|
|
/* Page tables are in RAM, and we have the host address. */
|
|
#ifdef CONFIG_ATOMIC64
|
|
data = qatomic_read__nocheck((uint64_t *)host);
|
|
if (ptw->out_be) {
|
|
data = be64_to_cpu(data);
|
|
} else {
|
|
data = le64_to_cpu(data);
|
|
}
|
|
#else
|
|
if (ptw->out_be) {
|
|
data = ldq_be_p(host);
|
|
} else {
|
|
data = ldq_le_p(host);
|
|
}
|
|
#endif
|
|
} else {
|
|
/* Page tables are in MMIO. */
|
|
MemTxAttrs attrs = { .secure = ptw->out_secure };
|
|
AddressSpace *as = arm_addressspace(cs, attrs);
|
|
MemTxResult result = MEMTX_OK;
|
|
|
|
if (ptw->out_be) {
|
|
data = address_space_ldq_be(as, ptw->out_phys, attrs, &result);
|
|
} else {
|
|
data = address_space_ldq_le(as, ptw->out_phys, attrs, &result);
|
|
}
|
|
if (unlikely(result != MEMTX_OK)) {
|
|
fi->type = ARMFault_SyncExternalOnWalk;
|
|
fi->ea = arm_extabort_type(result);
|
|
return 0;
|
|
}
|
|
}
|
|
return data;
|
|
}
|
|
|
|
static uint64_t arm_casq_ptw(CPUARMState *env, uint64_t old_val,
|
|
uint64_t new_val, S1Translate *ptw,
|
|
ARMMMUFaultInfo *fi)
|
|
{
|
|
uint64_t cur_val;
|
|
void *host = ptw->out_host;
|
|
|
|
if (unlikely(!host)) {
|
|
fi->type = ARMFault_UnsuppAtomicUpdate;
|
|
fi->s1ptw = true;
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Raising a stage2 Protection fault for an atomic update to a read-only
|
|
* page is delayed until it is certain that there is a change to make.
|
|
*/
|
|
if (unlikely(!ptw->out_rw)) {
|
|
int flags;
|
|
void *discard;
|
|
|
|
env->tlb_fi = fi;
|
|
flags = probe_access_flags(env, ptw->out_virt, 0, MMU_DATA_STORE,
|
|
arm_to_core_mmu_idx(ptw->in_ptw_idx),
|
|
true, &discard, 0);
|
|
env->tlb_fi = NULL;
|
|
|
|
if (unlikely(flags & TLB_INVALID_MASK)) {
|
|
assert(fi->type != ARMFault_None);
|
|
fi->s2addr = ptw->out_virt;
|
|
fi->stage2 = true;
|
|
fi->s1ptw = true;
|
|
fi->s1ns = !ptw->in_secure;
|
|
return 0;
|
|
}
|
|
|
|
/* In case CAS mismatches and we loop, remember writability. */
|
|
ptw->out_rw = true;
|
|
}
|
|
|
|
#ifdef CONFIG_ATOMIC64
|
|
if (ptw->out_be) {
|
|
old_val = cpu_to_be64(old_val);
|
|
new_val = cpu_to_be64(new_val);
|
|
cur_val = qatomic_cmpxchg__nocheck((uint64_t *)host, old_val, new_val);
|
|
cur_val = be64_to_cpu(cur_val);
|
|
} else {
|
|
old_val = cpu_to_le64(old_val);
|
|
new_val = cpu_to_le64(new_val);
|
|
cur_val = qatomic_cmpxchg__nocheck((uint64_t *)host, old_val, new_val);
|
|
cur_val = le64_to_cpu(cur_val);
|
|
}
|
|
#else
|
|
/*
|
|
* We can't support the full 64-bit atomic cmpxchg on the host.
|
|
* Because this is only used for FEAT_HAFDBS, which is only for AA64,
|
|
* we know that TCG_OVERSIZED_GUEST is set, which means that we are
|
|
* running in round-robin mode and could only race with dma i/o.
|
|
*/
|
|
#ifndef TCG_OVERSIZED_GUEST
|
|
# error "Unexpected configuration"
|
|
#endif
|
|
bool locked = qemu_mutex_iothread_locked();
|
|
if (!locked) {
|
|
qemu_mutex_lock_iothread();
|
|
}
|
|
if (ptw->out_be) {
|
|
cur_val = ldq_be_p(host);
|
|
if (cur_val == old_val) {
|
|
stq_be_p(host, new_val);
|
|
}
|
|
} else {
|
|
cur_val = ldq_le_p(host);
|
|
if (cur_val == old_val) {
|
|
stq_le_p(host, new_val);
|
|
}
|
|
}
|
|
if (!locked) {
|
|
qemu_mutex_unlock_iothread();
|
|
}
|
|
#endif
|
|
|
|
return cur_val;
|
|
}
|
|
|
|
static bool get_level1_table_address(CPUARMState *env, ARMMMUIdx mmu_idx,
|
|
uint32_t *table, uint32_t address)
|
|
{
|
|
/* Note that we can only get here for an AArch32 PL0/PL1 lookup */
|
|
uint64_t tcr = regime_tcr(env, mmu_idx);
|
|
int maskshift = extract32(tcr, 0, 3);
|
|
uint32_t mask = ~(((uint32_t)0xffffffffu) >> maskshift);
|
|
uint32_t base_mask;
|
|
|
|
if (address & mask) {
|
|
if (tcr & TTBCR_PD1) {
|
|
/* Translation table walk disabled for TTBR1 */
|
|
return false;
|
|
}
|
|
*table = regime_ttbr(env, mmu_idx, 1) & 0xffffc000;
|
|
} else {
|
|
if (tcr & TTBCR_PD0) {
|
|
/* Translation table walk disabled for TTBR0 */
|
|
return false;
|
|
}
|
|
base_mask = ~((uint32_t)0x3fffu >> maskshift);
|
|
*table = regime_ttbr(env, mmu_idx, 0) & base_mask;
|
|
}
|
|
*table |= (address >> 18) & 0x3ffc;
|
|
return true;
|
|
}
|
|
|
|
/*
|
|
* Translate section/page access permissions to page R/W protection flags
|
|
* @env: CPUARMState
|
|
* @mmu_idx: MMU index indicating required translation regime
|
|
* @ap: The 3-bit access permissions (AP[2:0])
|
|
* @domain_prot: The 2-bit domain access permissions
|
|
* @is_user: TRUE if accessing from PL0
|
|
*/
|
|
static int ap_to_rw_prot_is_user(CPUARMState *env, ARMMMUIdx mmu_idx,
|
|
int ap, int domain_prot, bool is_user)
|
|
{
|
|
if (domain_prot == 3) {
|
|
return PAGE_READ | PAGE_WRITE;
|
|
}
|
|
|
|
switch (ap) {
|
|
case 0:
|
|
if (arm_feature(env, ARM_FEATURE_V7)) {
|
|
return 0;
|
|
}
|
|
switch (regime_sctlr(env, mmu_idx) & (SCTLR_S | SCTLR_R)) {
|
|
case SCTLR_S:
|
|
return is_user ? 0 : PAGE_READ;
|
|
case SCTLR_R:
|
|
return PAGE_READ;
|
|
default:
|
|
return 0;
|
|
}
|
|
case 1:
|
|
return is_user ? 0 : PAGE_READ | PAGE_WRITE;
|
|
case 2:
|
|
if (is_user) {
|
|
return PAGE_READ;
|
|
} else {
|
|
return PAGE_READ | PAGE_WRITE;
|
|
}
|
|
case 3:
|
|
return PAGE_READ | PAGE_WRITE;
|
|
case 4: /* Reserved. */
|
|
return 0;
|
|
case 5:
|
|
return is_user ? 0 : PAGE_READ;
|
|
case 6:
|
|
return PAGE_READ;
|
|
case 7:
|
|
if (!arm_feature(env, ARM_FEATURE_V6K)) {
|
|
return 0;
|
|
}
|
|
return PAGE_READ;
|
|
default:
|
|
g_assert_not_reached();
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Translate section/page access permissions to page R/W protection flags
|
|
* @env: CPUARMState
|
|
* @mmu_idx: MMU index indicating required translation regime
|
|
* @ap: The 3-bit access permissions (AP[2:0])
|
|
* @domain_prot: The 2-bit domain access permissions
|
|
*/
|
|
static int ap_to_rw_prot(CPUARMState *env, ARMMMUIdx mmu_idx,
|
|
int ap, int domain_prot)
|
|
{
|
|
return ap_to_rw_prot_is_user(env, mmu_idx, ap, domain_prot,
|
|
regime_is_user(env, mmu_idx));
|
|
}
|
|
|
|
/*
|
|
* Translate section/page access permissions to page R/W protection flags.
|
|
* @ap: The 2-bit simple AP (AP[2:1])
|
|
* @is_user: TRUE if accessing from PL0
|
|
*/
|
|
static int simple_ap_to_rw_prot_is_user(int ap, bool is_user)
|
|
{
|
|
switch (ap) {
|
|
case 0:
|
|
return is_user ? 0 : PAGE_READ | PAGE_WRITE;
|
|
case 1:
|
|
return PAGE_READ | PAGE_WRITE;
|
|
case 2:
|
|
return is_user ? 0 : PAGE_READ;
|
|
case 3:
|
|
return PAGE_READ;
|
|
default:
|
|
g_assert_not_reached();
|
|
}
|
|
}
|
|
|
|
static int simple_ap_to_rw_prot(CPUARMState *env, ARMMMUIdx mmu_idx, int ap)
|
|
{
|
|
return simple_ap_to_rw_prot_is_user(ap, regime_is_user(env, mmu_idx));
|
|
}
|
|
|
|
static bool get_phys_addr_v5(CPUARMState *env, S1Translate *ptw,
|
|
uint32_t address, MMUAccessType access_type,
|
|
GetPhysAddrResult *result, ARMMMUFaultInfo *fi)
|
|
{
|
|
int level = 1;
|
|
uint32_t table;
|
|
uint32_t desc;
|
|
int type;
|
|
int ap;
|
|
int domain = 0;
|
|
int domain_prot;
|
|
hwaddr phys_addr;
|
|
uint32_t dacr;
|
|
|
|
/* Pagetable walk. */
|
|
/* Lookup l1 descriptor. */
|
|
if (!get_level1_table_address(env, ptw->in_mmu_idx, &table, address)) {
|
|
/* Section translation fault if page walk is disabled by PD0 or PD1 */
|
|
fi->type = ARMFault_Translation;
|
|
goto do_fault;
|
|
}
|
|
if (!S1_ptw_translate(env, ptw, table, fi)) {
|
|
goto do_fault;
|
|
}
|
|
desc = arm_ldl_ptw(env, ptw, fi);
|
|
if (fi->type != ARMFault_None) {
|
|
goto do_fault;
|
|
}
|
|
type = (desc & 3);
|
|
domain = (desc >> 5) & 0x0f;
|
|
if (regime_el(env, ptw->in_mmu_idx) == 1) {
|
|
dacr = env->cp15.dacr_ns;
|
|
} else {
|
|
dacr = env->cp15.dacr_s;
|
|
}
|
|
domain_prot = (dacr >> (domain * 2)) & 3;
|
|
if (type == 0) {
|
|
/* Section translation fault. */
|
|
fi->type = ARMFault_Translation;
|
|
goto do_fault;
|
|
}
|
|
if (type != 2) {
|
|
level = 2;
|
|
}
|
|
if (domain_prot == 0 || domain_prot == 2) {
|
|
fi->type = ARMFault_Domain;
|
|
goto do_fault;
|
|
}
|
|
if (type == 2) {
|
|
/* 1Mb section. */
|
|
phys_addr = (desc & 0xfff00000) | (address & 0x000fffff);
|
|
ap = (desc >> 10) & 3;
|
|
result->f.lg_page_size = 20; /* 1MB */
|
|
} else {
|
|
/* Lookup l2 entry. */
|
|
if (type == 1) {
|
|
/* Coarse pagetable. */
|
|
table = (desc & 0xfffffc00) | ((address >> 10) & 0x3fc);
|
|
} else {
|
|
/* Fine pagetable. */
|
|
table = (desc & 0xfffff000) | ((address >> 8) & 0xffc);
|
|
}
|
|
if (!S1_ptw_translate(env, ptw, table, fi)) {
|
|
goto do_fault;
|
|
}
|
|
desc = arm_ldl_ptw(env, ptw, fi);
|
|
if (fi->type != ARMFault_None) {
|
|
goto do_fault;
|
|
}
|
|
switch (desc & 3) {
|
|
case 0: /* Page translation fault. */
|
|
fi->type = ARMFault_Translation;
|
|
goto do_fault;
|
|
case 1: /* 64k page. */
|
|
phys_addr = (desc & 0xffff0000) | (address & 0xffff);
|
|
ap = (desc >> (4 + ((address >> 13) & 6))) & 3;
|
|
result->f.lg_page_size = 16;
|
|
break;
|
|
case 2: /* 4k page. */
|
|
phys_addr = (desc & 0xfffff000) | (address & 0xfff);
|
|
ap = (desc >> (4 + ((address >> 9) & 6))) & 3;
|
|
result->f.lg_page_size = 12;
|
|
break;
|
|
case 3: /* 1k page, or ARMv6/XScale "extended small (4k) page" */
|
|
if (type == 1) {
|
|
/* ARMv6/XScale extended small page format */
|
|
if (arm_feature(env, ARM_FEATURE_XSCALE)
|
|
|| arm_feature(env, ARM_FEATURE_V6)) {
|
|
phys_addr = (desc & 0xfffff000) | (address & 0xfff);
|
|
result->f.lg_page_size = 12;
|
|
} else {
|
|
/*
|
|
* UNPREDICTABLE in ARMv5; we choose to take a
|
|
* page translation fault.
|
|
*/
|
|
fi->type = ARMFault_Translation;
|
|
goto do_fault;
|
|
}
|
|
} else {
|
|
phys_addr = (desc & 0xfffffc00) | (address & 0x3ff);
|
|
result->f.lg_page_size = 10;
|
|
}
|
|
ap = (desc >> 4) & 3;
|
|
break;
|
|
default:
|
|
/* Never happens, but compiler isn't smart enough to tell. */
|
|
g_assert_not_reached();
|
|
}
|
|
}
|
|
result->f.prot = ap_to_rw_prot(env, ptw->in_mmu_idx, ap, domain_prot);
|
|
result->f.prot |= result->f.prot ? PAGE_EXEC : 0;
|
|
if (!(result->f.prot & (1 << access_type))) {
|
|
/* Access permission fault. */
|
|
fi->type = ARMFault_Permission;
|
|
goto do_fault;
|
|
}
|
|
result->f.phys_addr = phys_addr;
|
|
return false;
|
|
do_fault:
|
|
fi->domain = domain;
|
|
fi->level = level;
|
|
return true;
|
|
}
|
|
|
|
static bool get_phys_addr_v6(CPUARMState *env, S1Translate *ptw,
|
|
uint32_t address, MMUAccessType access_type,
|
|
GetPhysAddrResult *result, ARMMMUFaultInfo *fi)
|
|
{
|
|
ARMCPU *cpu = env_archcpu(env);
|
|
ARMMMUIdx mmu_idx = ptw->in_mmu_idx;
|
|
int level = 1;
|
|
uint32_t table;
|
|
uint32_t desc;
|
|
uint32_t xn;
|
|
uint32_t pxn = 0;
|
|
int type;
|
|
int ap;
|
|
int domain = 0;
|
|
int domain_prot;
|
|
hwaddr phys_addr;
|
|
uint32_t dacr;
|
|
bool ns;
|
|
int user_prot;
|
|
|
|
/* Pagetable walk. */
|
|
/* Lookup l1 descriptor. */
|
|
if (!get_level1_table_address(env, mmu_idx, &table, address)) {
|
|
/* Section translation fault if page walk is disabled by PD0 or PD1 */
|
|
fi->type = ARMFault_Translation;
|
|
goto do_fault;
|
|
}
|
|
if (!S1_ptw_translate(env, ptw, table, fi)) {
|
|
goto do_fault;
|
|
}
|
|
desc = arm_ldl_ptw(env, ptw, fi);
|
|
if (fi->type != ARMFault_None) {
|
|
goto do_fault;
|
|
}
|
|
type = (desc & 3);
|
|
if (type == 0 || (type == 3 && !cpu_isar_feature(aa32_pxn, cpu))) {
|
|
/* Section translation fault, or attempt to use the encoding
|
|
* which is Reserved on implementations without PXN.
|
|
*/
|
|
fi->type = ARMFault_Translation;
|
|
goto do_fault;
|
|
}
|
|
if ((type == 1) || !(desc & (1 << 18))) {
|
|
/* Page or Section. */
|
|
domain = (desc >> 5) & 0x0f;
|
|
}
|
|
if (regime_el(env, mmu_idx) == 1) {
|
|
dacr = env->cp15.dacr_ns;
|
|
} else {
|
|
dacr = env->cp15.dacr_s;
|
|
}
|
|
if (type == 1) {
|
|
level = 2;
|
|
}
|
|
domain_prot = (dacr >> (domain * 2)) & 3;
|
|
if (domain_prot == 0 || domain_prot == 2) {
|
|
/* Section or Page domain fault */
|
|
fi->type = ARMFault_Domain;
|
|
goto do_fault;
|
|
}
|
|
if (type != 1) {
|
|
if (desc & (1 << 18)) {
|
|
/* Supersection. */
|
|
phys_addr = (desc & 0xff000000) | (address & 0x00ffffff);
|
|
phys_addr |= (uint64_t)extract32(desc, 20, 4) << 32;
|
|
phys_addr |= (uint64_t)extract32(desc, 5, 4) << 36;
|
|
result->f.lg_page_size = 24; /* 16MB */
|
|
} else {
|
|
/* Section. */
|
|
phys_addr = (desc & 0xfff00000) | (address & 0x000fffff);
|
|
result->f.lg_page_size = 20; /* 1MB */
|
|
}
|
|
ap = ((desc >> 10) & 3) | ((desc >> 13) & 4);
|
|
xn = desc & (1 << 4);
|
|
pxn = desc & 1;
|
|
ns = extract32(desc, 19, 1);
|
|
} else {
|
|
if (cpu_isar_feature(aa32_pxn, cpu)) {
|
|
pxn = (desc >> 2) & 1;
|
|
}
|
|
ns = extract32(desc, 3, 1);
|
|
/* Lookup l2 entry. */
|
|
table = (desc & 0xfffffc00) | ((address >> 10) & 0x3fc);
|
|
if (!S1_ptw_translate(env, ptw, table, fi)) {
|
|
goto do_fault;
|
|
}
|
|
desc = arm_ldl_ptw(env, ptw, fi);
|
|
if (fi->type != ARMFault_None) {
|
|
goto do_fault;
|
|
}
|
|
ap = ((desc >> 4) & 3) | ((desc >> 7) & 4);
|
|
switch (desc & 3) {
|
|
case 0: /* Page translation fault. */
|
|
fi->type = ARMFault_Translation;
|
|
goto do_fault;
|
|
case 1: /* 64k page. */
|
|
phys_addr = (desc & 0xffff0000) | (address & 0xffff);
|
|
xn = desc & (1 << 15);
|
|
result->f.lg_page_size = 16;
|
|
break;
|
|
case 2: case 3: /* 4k page. */
|
|
phys_addr = (desc & 0xfffff000) | (address & 0xfff);
|
|
xn = desc & 1;
|
|
result->f.lg_page_size = 12;
|
|
break;
|
|
default:
|
|
/* Never happens, but compiler isn't smart enough to tell. */
|
|
g_assert_not_reached();
|
|
}
|
|
}
|
|
if (domain_prot == 3) {
|
|
result->f.prot = PAGE_READ | PAGE_WRITE | PAGE_EXEC;
|
|
} else {
|
|
if (pxn && !regime_is_user(env, mmu_idx)) {
|
|
xn = 1;
|
|
}
|
|
if (xn && access_type == MMU_INST_FETCH) {
|
|
fi->type = ARMFault_Permission;
|
|
goto do_fault;
|
|
}
|
|
|
|
if (arm_feature(env, ARM_FEATURE_V6K) &&
|
|
(regime_sctlr(env, mmu_idx) & SCTLR_AFE)) {
|
|
/* The simplified model uses AP[0] as an access control bit. */
|
|
if ((ap & 1) == 0) {
|
|
/* Access flag fault. */
|
|
fi->type = ARMFault_AccessFlag;
|
|
goto do_fault;
|
|
}
|
|
result->f.prot = simple_ap_to_rw_prot(env, mmu_idx, ap >> 1);
|
|
user_prot = simple_ap_to_rw_prot_is_user(ap >> 1, 1);
|
|
} else {
|
|
result->f.prot = ap_to_rw_prot(env, mmu_idx, ap, domain_prot);
|
|
user_prot = ap_to_rw_prot_is_user(env, mmu_idx, ap, domain_prot, 1);
|
|
}
|
|
if (result->f.prot && !xn) {
|
|
result->f.prot |= PAGE_EXEC;
|
|
}
|
|
if (!(result->f.prot & (1 << access_type))) {
|
|
/* Access permission fault. */
|
|
fi->type = ARMFault_Permission;
|
|
goto do_fault;
|
|
}
|
|
if (regime_is_pan(env, mmu_idx) &&
|
|
!regime_is_user(env, mmu_idx) &&
|
|
user_prot &&
|
|
access_type != MMU_INST_FETCH) {
|
|
/* Privileged Access Never fault */
|
|
fi->type = ARMFault_Permission;
|
|
goto do_fault;
|
|
}
|
|
}
|
|
if (ns) {
|
|
/* The NS bit will (as required by the architecture) have no effect if
|
|
* the CPU doesn't support TZ or this is a non-secure translation
|
|
* regime, because the attribute will already be non-secure.
|
|
*/
|
|
result->f.attrs.secure = false;
|
|
}
|
|
result->f.phys_addr = phys_addr;
|
|
return false;
|
|
do_fault:
|
|
fi->domain = domain;
|
|
fi->level = level;
|
|
return true;
|
|
}
|
|
|
|
/*
|
|
* Translate S2 section/page access permissions to protection flags
|
|
* @env: CPUARMState
|
|
* @s2ap: The 2-bit stage2 access permissions (S2AP)
|
|
* @xn: XN (execute-never) bits
|
|
* @s1_is_el0: true if this is S2 of an S1+2 walk for EL0
|
|
*/
|
|
static int get_S2prot(CPUARMState *env, int s2ap, int xn, bool s1_is_el0)
|
|
{
|
|
int prot = 0;
|
|
|
|
if (s2ap & 1) {
|
|
prot |= PAGE_READ;
|
|
}
|
|
if (s2ap & 2) {
|
|
prot |= PAGE_WRITE;
|
|
}
|
|
|
|
if (cpu_isar_feature(any_tts2uxn, env_archcpu(env))) {
|
|
switch (xn) {
|
|
case 0:
|
|
prot |= PAGE_EXEC;
|
|
break;
|
|
case 1:
|
|
if (s1_is_el0) {
|
|
prot |= PAGE_EXEC;
|
|
}
|
|
break;
|
|
case 2:
|
|
break;
|
|
case 3:
|
|
if (!s1_is_el0) {
|
|
prot |= PAGE_EXEC;
|
|
}
|
|
break;
|
|
default:
|
|
g_assert_not_reached();
|
|
}
|
|
} else {
|
|
if (!extract32(xn, 1, 1)) {
|
|
if (arm_el_is_aa64(env, 2) || prot & PAGE_READ) {
|
|
prot |= PAGE_EXEC;
|
|
}
|
|
}
|
|
}
|
|
return prot;
|
|
}
|
|
|
|
/*
|
|
* Translate section/page access permissions to protection flags
|
|
* @env: CPUARMState
|
|
* @mmu_idx: MMU index indicating required translation regime
|
|
* @is_aa64: TRUE if AArch64
|
|
* @ap: The 2-bit simple AP (AP[2:1])
|
|
* @ns: NS (non-secure) bit
|
|
* @xn: XN (execute-never) bit
|
|
* @pxn: PXN (privileged execute-never) bit
|
|
*/
|
|
static int get_S1prot(CPUARMState *env, ARMMMUIdx mmu_idx, bool is_aa64,
|
|
int ap, int ns, int xn, int pxn)
|
|
{
|
|
ARMCPU *cpu = env_archcpu(env);
|
|
bool is_user = regime_is_user(env, mmu_idx);
|
|
int prot_rw, user_rw;
|
|
bool have_wxn;
|
|
int wxn = 0;
|
|
|
|
assert(!regime_is_stage2(mmu_idx));
|
|
|
|
user_rw = simple_ap_to_rw_prot_is_user(ap, true);
|
|
if (is_user) {
|
|
prot_rw = user_rw;
|
|
} else {
|
|
/*
|
|
* PAN controls can forbid data accesses but don't affect insn fetch.
|
|
* Plain PAN forbids data accesses if EL0 has data permissions;
|
|
* PAN3 forbids data accesses if EL0 has either data or exec perms.
|
|
* Note that for AArch64 the 'user can exec' case is exactly !xn.
|
|
* We make the IMPDEF choices that SCR_EL3.SIF and Realm EL2&0
|
|
* do not affect EPAN.
|
|
*/
|
|
if (user_rw && regime_is_pan(env, mmu_idx)) {
|
|
prot_rw = 0;
|
|
} else if (cpu_isar_feature(aa64_pan3, cpu) && is_aa64 &&
|
|
regime_is_pan(env, mmu_idx) &&
|
|
(regime_sctlr(env, mmu_idx) & SCTLR_EPAN) && !xn) {
|
|
prot_rw = 0;
|
|
} else {
|
|
prot_rw = simple_ap_to_rw_prot_is_user(ap, false);
|
|
}
|
|
}
|
|
|
|
if (ns && arm_is_secure(env) && (env->cp15.scr_el3 & SCR_SIF)) {
|
|
return prot_rw;
|
|
}
|
|
|
|
/* TODO have_wxn should be replaced with
|
|
* ARM_FEATURE_V8 || (ARM_FEATURE_V7 && ARM_FEATURE_EL2)
|
|
* when ARM_FEATURE_EL2 starts getting set. For now we assume all LPAE
|
|
* compatible processors have EL2, which is required for [U]WXN.
|
|
*/
|
|
have_wxn = arm_feature(env, ARM_FEATURE_LPAE);
|
|
|
|
if (have_wxn) {
|
|
wxn = regime_sctlr(env, mmu_idx) & SCTLR_WXN;
|
|
}
|
|
|
|
if (is_aa64) {
|
|
if (regime_has_2_ranges(mmu_idx) && !is_user) {
|
|
xn = pxn || (user_rw & PAGE_WRITE);
|
|
}
|
|
} else if (arm_feature(env, ARM_FEATURE_V7)) {
|
|
switch (regime_el(env, mmu_idx)) {
|
|
case 1:
|
|
case 3:
|
|
if (is_user) {
|
|
xn = xn || !(user_rw & PAGE_READ);
|
|
} else {
|
|
int uwxn = 0;
|
|
if (have_wxn) {
|
|
uwxn = regime_sctlr(env, mmu_idx) & SCTLR_UWXN;
|
|
}
|
|
xn = xn || !(prot_rw & PAGE_READ) || pxn ||
|
|
(uwxn && (user_rw & PAGE_WRITE));
|
|
}
|
|
break;
|
|
case 2:
|
|
break;
|
|
}
|
|
} else {
|
|
xn = wxn = 0;
|
|
}
|
|
|
|
if (xn || (wxn && (prot_rw & PAGE_WRITE))) {
|
|
return prot_rw;
|
|
}
|
|
return prot_rw | PAGE_EXEC;
|
|
}
|
|
|
|
static ARMVAParameters aa32_va_parameters(CPUARMState *env, uint32_t va,
|
|
ARMMMUIdx mmu_idx)
|
|
{
|
|
uint64_t tcr = regime_tcr(env, mmu_idx);
|
|
uint32_t el = regime_el(env, mmu_idx);
|
|
int select, tsz;
|
|
bool epd, hpd;
|
|
|
|
assert(mmu_idx != ARMMMUIdx_Stage2_S);
|
|
|
|
if (mmu_idx == ARMMMUIdx_Stage2) {
|
|
/* VTCR */
|
|
bool sext = extract32(tcr, 4, 1);
|
|
bool sign = extract32(tcr, 3, 1);
|
|
|
|
/*
|
|
* If the sign-extend bit is not the same as t0sz[3], the result
|
|
* is unpredictable. Flag this as a guest error.
|
|
*/
|
|
if (sign != sext) {
|
|
qemu_log_mask(LOG_GUEST_ERROR,
|
|
"AArch32: VTCR.S / VTCR.T0SZ[3] mismatch\n");
|
|
}
|
|
tsz = sextract32(tcr, 0, 4) + 8;
|
|
select = 0;
|
|
hpd = false;
|
|
epd = false;
|
|
} else if (el == 2) {
|
|
/* HTCR */
|
|
tsz = extract32(tcr, 0, 3);
|
|
select = 0;
|
|
hpd = extract64(tcr, 24, 1);
|
|
epd = false;
|
|
} else {
|
|
int t0sz = extract32(tcr, 0, 3);
|
|
int t1sz = extract32(tcr, 16, 3);
|
|
|
|
if (t1sz == 0) {
|
|
select = va > (0xffffffffu >> t0sz);
|
|
} else {
|
|
/* Note that we will detect errors later. */
|
|
select = va >= ~(0xffffffffu >> t1sz);
|
|
}
|
|
if (!select) {
|
|
tsz = t0sz;
|
|
epd = extract32(tcr, 7, 1);
|
|
hpd = extract64(tcr, 41, 1);
|
|
} else {
|
|
tsz = t1sz;
|
|
epd = extract32(tcr, 23, 1);
|
|
hpd = extract64(tcr, 42, 1);
|
|
}
|
|
/* For aarch32, hpd0 is not enabled without t2e as well. */
|
|
hpd &= extract32(tcr, 6, 1);
|
|
}
|
|
|
|
return (ARMVAParameters) {
|
|
.tsz = tsz,
|
|
.select = select,
|
|
.epd = epd,
|
|
.hpd = hpd,
|
|
};
|
|
}
|
|
|
|
/*
|
|
* check_s2_mmu_setup
|
|
* @cpu: ARMCPU
|
|
* @is_aa64: True if the translation regime is in AArch64 state
|
|
* @tcr: VTCR_EL2 or VSTCR_EL2
|
|
* @ds: Effective value of TCR.DS.
|
|
* @iasize: Bitsize of IPAs
|
|
* @stride: Page-table stride (See the ARM ARM)
|
|
*
|
|
* Decode the starting level of the S2 lookup, returning INT_MIN if
|
|
* the configuration is invalid.
|
|
*/
|
|
static int check_s2_mmu_setup(ARMCPU *cpu, bool is_aa64, uint64_t tcr,
|
|
bool ds, int iasize, int stride)
|
|
{
|
|
int sl0, sl2, startlevel, granulebits, levels;
|
|
int s1_min_iasize, s1_max_iasize;
|
|
|
|
sl0 = extract32(tcr, 6, 2);
|
|
if (is_aa64) {
|
|
/*
|
|
* AArch64.S2InvalidSL: Interpretation of SL depends on the page size,
|
|
* so interleave AArch64.S2StartLevel.
|
|
*/
|
|
switch (stride) {
|
|
case 9: /* 4KB */
|
|
/* SL2 is RES0 unless DS=1 & 4KB granule. */
|
|
sl2 = extract64(tcr, 33, 1);
|
|
if (ds && sl2) {
|
|
if (sl0 != 0) {
|
|
goto fail;
|
|
}
|
|
startlevel = -1;
|
|
} else {
|
|
startlevel = 2 - sl0;
|
|
switch (sl0) {
|
|
case 2:
|
|
if (arm_pamax(cpu) < 44) {
|
|
goto fail;
|
|
}
|
|
break;
|
|
case 3:
|
|
if (!cpu_isar_feature(aa64_st, cpu)) {
|
|
goto fail;
|
|
}
|
|
startlevel = 3;
|
|
break;
|
|
}
|
|
}
|
|
break;
|
|
case 11: /* 16KB */
|
|
switch (sl0) {
|
|
case 2:
|
|
if (arm_pamax(cpu) < 42) {
|
|
goto fail;
|
|
}
|
|
break;
|
|
case 3:
|
|
if (!ds) {
|
|
goto fail;
|
|
}
|
|
break;
|
|
}
|
|
startlevel = 3 - sl0;
|
|
break;
|
|
case 13: /* 64KB */
|
|
switch (sl0) {
|
|
case 2:
|
|
if (arm_pamax(cpu) < 44) {
|
|
goto fail;
|
|
}
|
|
break;
|
|
case 3:
|
|
goto fail;
|
|
}
|
|
startlevel = 3 - sl0;
|
|
break;
|
|
default:
|
|
g_assert_not_reached();
|
|
}
|
|
} else {
|
|
/*
|
|
* Things are simpler for AArch32 EL2, with only 4k pages.
|
|
* There is no separate S2InvalidSL function, but AArch32.S2Walk
|
|
* begins with walkparms.sl0 in {'1x'}.
|
|
*/
|
|
assert(stride == 9);
|
|
if (sl0 >= 2) {
|
|
goto fail;
|
|
}
|
|
startlevel = 2 - sl0;
|
|
}
|
|
|
|
/* AArch{64,32}.S2InconsistentSL are functionally equivalent. */
|
|
levels = 3 - startlevel;
|
|
granulebits = stride + 3;
|
|
|
|
s1_min_iasize = levels * stride + granulebits + 1;
|
|
s1_max_iasize = s1_min_iasize + (stride - 1) + 4;
|
|
|
|
if (iasize >= s1_min_iasize && iasize <= s1_max_iasize) {
|
|
return startlevel;
|
|
}
|
|
|
|
fail:
|
|
return INT_MIN;
|
|
}
|
|
|
|
/**
|
|
* get_phys_addr_lpae: perform one stage of page table walk, LPAE format
|
|
*
|
|
* Returns false if the translation was successful. Otherwise, phys_ptr,
|
|
* attrs, prot and page_size may not be filled in, and the populated fsr
|
|
* value provides information on why the translation aborted, in the format
|
|
* of a long-format DFSR/IFSR fault register, with the following caveat:
|
|
* the WnR bit is never set (the caller must do this).
|
|
*
|
|
* @env: CPUARMState
|
|
* @ptw: Current and next stage parameters for the walk.
|
|
* @address: virtual address to get physical address for
|
|
* @access_type: MMU_DATA_LOAD, MMU_DATA_STORE or MMU_INST_FETCH
|
|
* @s1_is_el0: if @ptw->in_mmu_idx is ARMMMUIdx_Stage2
|
|
* (so this is a stage 2 page table walk),
|
|
* must be true if this is stage 2 of a stage 1+2
|
|
* walk for an EL0 access. If @mmu_idx is anything else,
|
|
* @s1_is_el0 is ignored.
|
|
* @result: set on translation success,
|
|
* @fi: set to fault info if the translation fails
|
|
*/
|
|
static bool get_phys_addr_lpae(CPUARMState *env, S1Translate *ptw,
|
|
uint64_t address,
|
|
MMUAccessType access_type, bool s1_is_el0,
|
|
GetPhysAddrResult *result, ARMMMUFaultInfo *fi)
|
|
{
|
|
ARMCPU *cpu = env_archcpu(env);
|
|
ARMMMUIdx mmu_idx = ptw->in_mmu_idx;
|
|
bool is_secure = ptw->in_secure;
|
|
int32_t level;
|
|
ARMVAParameters param;
|
|
uint64_t ttbr;
|
|
hwaddr descaddr, indexmask, indexmask_grainsize;
|
|
uint32_t tableattrs;
|
|
target_ulong page_size;
|
|
uint64_t attrs;
|
|
int32_t stride;
|
|
int addrsize, inputsize, outputsize;
|
|
uint64_t tcr = regime_tcr(env, mmu_idx);
|
|
int ap, ns, xn, pxn;
|
|
uint32_t el = regime_el(env, mmu_idx);
|
|
uint64_t descaddrmask;
|
|
bool aarch64 = arm_el_is_aa64(env, el);
|
|
uint64_t descriptor, new_descriptor;
|
|
bool nstable;
|
|
|
|
/* TODO: This code does not support shareability levels. */
|
|
if (aarch64) {
|
|
int ps;
|
|
|
|
param = aa64_va_parameters(env, address, mmu_idx,
|
|
access_type != MMU_INST_FETCH,
|
|
!arm_el_is_aa64(env, 1));
|
|
level = 0;
|
|
|
|
/*
|
|
* If TxSZ is programmed to a value larger than the maximum,
|
|
* or smaller than the effective minimum, it is IMPLEMENTATION
|
|
* DEFINED whether we behave as if the field were programmed
|
|
* within bounds, or if a level 0 Translation fault is generated.
|
|
*
|
|
* With FEAT_LVA, fault on less than minimum becomes required,
|
|
* so our choice is to always raise the fault.
|
|
*/
|
|
if (param.tsz_oob) {
|
|
goto do_translation_fault;
|
|
}
|
|
|
|
addrsize = 64 - 8 * param.tbi;
|
|
inputsize = 64 - param.tsz;
|
|
|
|
/*
|
|
* Bound PS by PARANGE to find the effective output address size.
|
|
* ID_AA64MMFR0 is a read-only register so values outside of the
|
|
* supported mappings can be considered an implementation error.
|
|
*/
|
|
ps = FIELD_EX64(cpu->isar.id_aa64mmfr0, ID_AA64MMFR0, PARANGE);
|
|
ps = MIN(ps, param.ps);
|
|
assert(ps < ARRAY_SIZE(pamax_map));
|
|
outputsize = pamax_map[ps];
|
|
|
|
/*
|
|
* With LPA2, the effective output address (OA) size is at most 48 bits
|
|
* unless TCR.DS == 1
|
|
*/
|
|
if (!param.ds && param.gran != Gran64K) {
|
|
outputsize = MIN(outputsize, 48);
|
|
}
|
|
} else {
|
|
param = aa32_va_parameters(env, address, mmu_idx);
|
|
level = 1;
|
|
addrsize = (mmu_idx == ARMMMUIdx_Stage2 ? 40 : 32);
|
|
inputsize = addrsize - param.tsz;
|
|
outputsize = 40;
|
|
}
|
|
|
|
/*
|
|
* We determined the region when collecting the parameters, but we
|
|
* have not yet validated that the address is valid for the region.
|
|
* Extract the top bits and verify that they all match select.
|
|
*
|
|
* For aa32, if inputsize == addrsize, then we have selected the
|
|
* region by exclusion in aa32_va_parameters and there is no more
|
|
* validation to do here.
|
|
*/
|
|
if (inputsize < addrsize) {
|
|
target_ulong top_bits = sextract64(address, inputsize,
|
|
addrsize - inputsize);
|
|
if (-top_bits != param.select) {
|
|
/* The gap between the two regions is a Translation fault */
|
|
goto do_translation_fault;
|
|
}
|
|
}
|
|
|
|
stride = arm_granule_bits(param.gran) - 3;
|
|
|
|
/*
|
|
* Note that QEMU ignores shareability and cacheability attributes,
|
|
* so we don't need to do anything with the SH, ORGN, IRGN fields
|
|
* in the TTBCR. Similarly, TTBCR:A1 selects whether we get the
|
|
* ASID from TTBR0 or TTBR1, but QEMU's TLB doesn't currently
|
|
* implement any ASID-like capability so we can ignore it (instead
|
|
* we will always flush the TLB any time the ASID is changed).
|
|
*/
|
|
ttbr = regime_ttbr(env, mmu_idx, param.select);
|
|
|
|
/*
|
|
* Here we should have set up all the parameters for the translation:
|
|
* inputsize, ttbr, epd, stride, tbi
|
|
*/
|
|
|
|
if (param.epd) {
|
|
/*
|
|
* Translation table walk disabled => Translation fault on TLB miss
|
|
* Note: This is always 0 on 64-bit EL2 and EL3.
|
|
*/
|
|
goto do_translation_fault;
|
|
}
|
|
|
|
if (!regime_is_stage2(mmu_idx)) {
|
|
/*
|
|
* The starting level depends on the virtual address size (which can
|
|
* be up to 48 bits) and the translation granule size. It indicates
|
|
* the number of strides (stride bits at a time) needed to
|
|
* consume the bits of the input address. In the pseudocode this is:
|
|
* level = 4 - RoundUp((inputsize - grainsize) / stride)
|
|
* where their 'inputsize' is our 'inputsize', 'grainsize' is
|
|
* our 'stride + 3' and 'stride' is our 'stride'.
|
|
* Applying the usual "rounded up m/n is (m+n-1)/n" and simplifying:
|
|
* = 4 - (inputsize - stride - 3 + stride - 1) / stride
|
|
* = 4 - (inputsize - 4) / stride;
|
|
*/
|
|
level = 4 - (inputsize - 4) / stride;
|
|
} else {
|
|
int startlevel = check_s2_mmu_setup(cpu, aarch64, tcr, param.ds,
|
|
inputsize, stride);
|
|
if (startlevel == INT_MIN) {
|
|
level = 0;
|
|
goto do_translation_fault;
|
|
}
|
|
level = startlevel;
|
|
}
|
|
|
|
indexmask_grainsize = MAKE_64BIT_MASK(0, stride + 3);
|
|
indexmask = MAKE_64BIT_MASK(0, inputsize - (stride * (4 - level)));
|
|
|
|
/* Now we can extract the actual base address from the TTBR */
|
|
descaddr = extract64(ttbr, 0, 48);
|
|
|
|
/*
|
|
* For FEAT_LPA and PS=6, bits [51:48] of descaddr are in [5:2] of TTBR.
|
|
*
|
|
* Otherwise, if the base address is out of range, raise AddressSizeFault.
|
|
* In the pseudocode, this is !IsZero(baseregister<47:outputsize>),
|
|
* but we've just cleared the bits above 47, so simplify the test.
|
|
*/
|
|
if (outputsize > 48) {
|
|
descaddr |= extract64(ttbr, 2, 4) << 48;
|
|
} else if (descaddr >> outputsize) {
|
|
level = 0;
|
|
fi->type = ARMFault_AddressSize;
|
|
goto do_fault;
|
|
}
|
|
|
|
/*
|
|
* We rely on this masking to clear the RES0 bits at the bottom of the TTBR
|
|
* and also to mask out CnP (bit 0) which could validly be non-zero.
|
|
*/
|
|
descaddr &= ~indexmask;
|
|
|
|
/*
|
|
* For AArch32, the address field in the descriptor goes up to bit 39
|
|
* for both v7 and v8. However, for v8 the SBZ bits [47:40] must be 0
|
|
* or an AddressSize fault is raised. So for v8 we extract those SBZ
|
|
* bits as part of the address, which will be checked via outputsize.
|
|
* For AArch64, the address field goes up to bit 47, or 49 with FEAT_LPA2;
|
|
* the highest bits of a 52-bit output are placed elsewhere.
|
|
*/
|
|
if (param.ds) {
|
|
descaddrmask = MAKE_64BIT_MASK(0, 50);
|
|
} else if (arm_feature(env, ARM_FEATURE_V8)) {
|
|
descaddrmask = MAKE_64BIT_MASK(0, 48);
|
|
} else {
|
|
descaddrmask = MAKE_64BIT_MASK(0, 40);
|
|
}
|
|
descaddrmask &= ~indexmask_grainsize;
|
|
|
|
/*
|
|
* Secure stage 1 accesses start with the page table in secure memory and
|
|
* can be downgraded to non-secure at any step. Non-secure accesses
|
|
* remain non-secure. We implement this by just ORing in the NSTable/NS
|
|
* bits at each step.
|
|
* Stage 2 never gets this kind of downgrade.
|
|
*/
|
|
tableattrs = is_secure ? 0 : (1 << 4);
|
|
|
|
next_level:
|
|
descaddr |= (address >> (stride * (4 - level))) & indexmask;
|
|
descaddr &= ~7ULL;
|
|
nstable = !regime_is_stage2(mmu_idx) && extract32(tableattrs, 4, 1);
|
|
if (nstable) {
|
|
/*
|
|
* Stage2_S -> Stage2 or Phys_S -> Phys_NS
|
|
* Assert that the non-secure idx are even, and relative order.
|
|
*/
|
|
QEMU_BUILD_BUG_ON((ARMMMUIdx_Phys_NS & 1) != 0);
|
|
QEMU_BUILD_BUG_ON((ARMMMUIdx_Stage2 & 1) != 0);
|
|
QEMU_BUILD_BUG_ON(ARMMMUIdx_Phys_NS + 1 != ARMMMUIdx_Phys_S);
|
|
QEMU_BUILD_BUG_ON(ARMMMUIdx_Stage2 + 1 != ARMMMUIdx_Stage2_S);
|
|
ptw->in_ptw_idx &= ~1;
|
|
ptw->in_secure = false;
|
|
}
|
|
if (!S1_ptw_translate(env, ptw, descaddr, fi)) {
|
|
goto do_fault;
|
|
}
|
|
descriptor = arm_ldq_ptw(env, ptw, fi);
|
|
if (fi->type != ARMFault_None) {
|
|
goto do_fault;
|
|
}
|
|
new_descriptor = descriptor;
|
|
|
|
restart_atomic_update:
|
|
if (!(descriptor & 1) || (!(descriptor & 2) && (level == 3))) {
|
|
/* Invalid, or the Reserved level 3 encoding */
|
|
goto do_translation_fault;
|
|
}
|
|
|
|
descaddr = descriptor & descaddrmask;
|
|
|
|
/*
|
|
* For FEAT_LPA and PS=6, bits [51:48] of descaddr are in [15:12]
|
|
* of descriptor. For FEAT_LPA2 and effective DS, bits [51:50] of
|
|
* descaddr are in [9:8]. Otherwise, if descaddr is out of range,
|
|
* raise AddressSizeFault.
|
|
*/
|
|
if (outputsize > 48) {
|
|
if (param.ds) {
|
|
descaddr |= extract64(descriptor, 8, 2) << 50;
|
|
} else {
|
|
descaddr |= extract64(descriptor, 12, 4) << 48;
|
|
}
|
|
} else if (descaddr >> outputsize) {
|
|
fi->type = ARMFault_AddressSize;
|
|
goto do_fault;
|
|
}
|
|
|
|
if ((descriptor & 2) && (level < 3)) {
|
|
/*
|
|
* Table entry. The top five bits are attributes which may
|
|
* propagate down through lower levels of the table (and
|
|
* which are all arranged so that 0 means "no effect", so
|
|
* we can gather them up by ORing in the bits at each level).
|
|
*/
|
|
tableattrs |= extract64(descriptor, 59, 5);
|
|
level++;
|
|
indexmask = indexmask_grainsize;
|
|
goto next_level;
|
|
}
|
|
|
|
/*
|
|
* Block entry at level 1 or 2, or page entry at level 3.
|
|
* These are basically the same thing, although the number
|
|
* of bits we pull in from the vaddr varies. Note that although
|
|
* descaddrmask masks enough of the low bits of the descriptor
|
|
* to give a correct page or table address, the address field
|
|
* in a block descriptor is smaller; so we need to explicitly
|
|
* clear the lower bits here before ORing in the low vaddr bits.
|
|
*
|
|
* Afterward, descaddr is the final physical address.
|
|
*/
|
|
page_size = (1ULL << ((stride * (4 - level)) + 3));
|
|
descaddr &= ~(hwaddr)(page_size - 1);
|
|
descaddr |= (address & (page_size - 1));
|
|
|
|
if (likely(!ptw->in_debug)) {
|
|
/*
|
|
* Access flag.
|
|
* If HA is enabled, prepare to update the descriptor below.
|
|
* Otherwise, pass the access fault on to software.
|
|
*/
|
|
if (!(descriptor & (1 << 10))) {
|
|
if (param.ha) {
|
|
new_descriptor |= 1 << 10; /* AF */
|
|
} else {
|
|
fi->type = ARMFault_AccessFlag;
|
|
goto do_fault;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Dirty Bit.
|
|
* If HD is enabled, pre-emptively set/clear the appropriate AP/S2AP
|
|
* bit for writeback. The actual write protection test may still be
|
|
* overridden by tableattrs, to be merged below.
|
|
*/
|
|
if (param.hd
|
|
&& extract64(descriptor, 51, 1) /* DBM */
|
|
&& access_type == MMU_DATA_STORE) {
|
|
if (regime_is_stage2(mmu_idx)) {
|
|
new_descriptor |= 1ull << 7; /* set S2AP[1] */
|
|
} else {
|
|
new_descriptor &= ~(1ull << 7); /* clear AP[2] */
|
|
}
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Extract attributes from the (modified) descriptor, and apply
|
|
* table descriptors. Stage 2 table descriptors do not include
|
|
* any attribute fields. HPD disables all the table attributes
|
|
* except NSTable.
|
|
*/
|
|
attrs = new_descriptor & (MAKE_64BIT_MASK(2, 10) | MAKE_64BIT_MASK(50, 14));
|
|
if (!regime_is_stage2(mmu_idx)) {
|
|
attrs |= nstable << 5; /* NS */
|
|
if (!param.hpd) {
|
|
attrs |= extract64(tableattrs, 0, 2) << 53; /* XN, PXN */
|
|
/*
|
|
* The sense of AP[1] vs APTable[0] is reversed, as APTable[0] == 1
|
|
* means "force PL1 access only", which means forcing AP[1] to 0.
|
|
*/
|
|
attrs &= ~(extract64(tableattrs, 2, 1) << 6); /* !APT[0] => AP[1] */
|
|
attrs |= extract32(tableattrs, 3, 1) << 7; /* APT[1] => AP[2] */
|
|
}
|
|
}
|
|
|
|
ap = extract32(attrs, 6, 2);
|
|
if (regime_is_stage2(mmu_idx)) {
|
|
ns = mmu_idx == ARMMMUIdx_Stage2;
|
|
xn = extract64(attrs, 53, 2);
|
|
result->f.prot = get_S2prot(env, ap, xn, s1_is_el0);
|
|
} else {
|
|
ns = extract32(attrs, 5, 1);
|
|
xn = extract64(attrs, 54, 1);
|
|
pxn = extract64(attrs, 53, 1);
|
|
result->f.prot = get_S1prot(env, mmu_idx, aarch64, ap, ns, xn, pxn);
|
|
}
|
|
|
|
if (!(result->f.prot & (1 << access_type))) {
|
|
fi->type = ARMFault_Permission;
|
|
goto do_fault;
|
|
}
|
|
|
|
/* If FEAT_HAFDBS has made changes, update the PTE. */
|
|
if (new_descriptor != descriptor) {
|
|
new_descriptor = arm_casq_ptw(env, descriptor, new_descriptor, ptw, fi);
|
|
if (fi->type != ARMFault_None) {
|
|
goto do_fault;
|
|
}
|
|
/*
|
|
* I_YZSVV says that if the in-memory descriptor has changed,
|
|
* then we must use the information in that new value
|
|
* (which might include a different output address, different
|
|
* attributes, or generate a fault).
|
|
* Restart the handling of the descriptor value from scratch.
|
|
*/
|
|
if (new_descriptor != descriptor) {
|
|
descriptor = new_descriptor;
|
|
goto restart_atomic_update;
|
|
}
|
|
}
|
|
|
|
if (ns) {
|
|
/*
|
|
* The NS bit will (as required by the architecture) have no effect if
|
|
* the CPU doesn't support TZ or this is a non-secure translation
|
|
* regime, because the attribute will already be non-secure.
|
|
*/
|
|
result->f.attrs.secure = false;
|
|
}
|
|
|
|
if (regime_is_stage2(mmu_idx)) {
|
|
result->cacheattrs.is_s2_format = true;
|
|
result->cacheattrs.attrs = extract32(attrs, 2, 4);
|
|
} else {
|
|
/* Index into MAIR registers for cache attributes */
|
|
uint8_t attrindx = extract32(attrs, 2, 3);
|
|
uint64_t mair = env->cp15.mair_el[regime_el(env, mmu_idx)];
|
|
assert(attrindx <= 7);
|
|
result->cacheattrs.is_s2_format = false;
|
|
result->cacheattrs.attrs = extract64(mair, attrindx * 8, 8);
|
|
|
|
/* When in aarch64 mode, and BTI is enabled, remember GP in the TLB. */
|
|
if (aarch64 && cpu_isar_feature(aa64_bti, cpu)) {
|
|
result->f.guarded = extract64(attrs, 50, 1); /* GP */
|
|
}
|
|
}
|
|
|
|
/*
|
|
* For FEAT_LPA2 and effective DS, the SH field in the attributes
|
|
* was re-purposed for output address bits. The SH attribute in
|
|
* that case comes from TCR_ELx, which we extracted earlier.
|
|
*/
|
|
if (param.ds) {
|
|
result->cacheattrs.shareability = param.sh;
|
|
} else {
|
|
result->cacheattrs.shareability = extract32(attrs, 8, 2);
|
|
}
|
|
|
|
result->f.phys_addr = descaddr;
|
|
result->f.lg_page_size = ctz64(page_size);
|
|
return false;
|
|
|
|
do_translation_fault:
|
|
fi->type = ARMFault_Translation;
|
|
do_fault:
|
|
fi->level = level;
|
|
/* Tag the error as S2 for failed S1 PTW at S2 or ordinary S2. */
|
|
fi->stage2 = fi->s1ptw || regime_is_stage2(mmu_idx);
|
|
fi->s1ns = mmu_idx == ARMMMUIdx_Stage2;
|
|
return true;
|
|
}
|
|
|
|
static bool get_phys_addr_pmsav5(CPUARMState *env, uint32_t address,
|
|
MMUAccessType access_type, ARMMMUIdx mmu_idx,
|
|
bool is_secure, GetPhysAddrResult *result,
|
|
ARMMMUFaultInfo *fi)
|
|
{
|
|
int n;
|
|
uint32_t mask;
|
|
uint32_t base;
|
|
bool is_user = regime_is_user(env, mmu_idx);
|
|
|
|
if (regime_translation_disabled(env, mmu_idx, is_secure)) {
|
|
/* MPU disabled. */
|
|
result->f.phys_addr = address;
|
|
result->f.prot = PAGE_READ | PAGE_WRITE | PAGE_EXEC;
|
|
return false;
|
|
}
|
|
|
|
result->f.phys_addr = address;
|
|
for (n = 7; n >= 0; n--) {
|
|
base = env->cp15.c6_region[n];
|
|
if ((base & 1) == 0) {
|
|
continue;
|
|
}
|
|
mask = 1 << ((base >> 1) & 0x1f);
|
|
/* Keep this shift separate from the above to avoid an
|
|
(undefined) << 32. */
|
|
mask = (mask << 1) - 1;
|
|
if (((base ^ address) & ~mask) == 0) {
|
|
break;
|
|
}
|
|
}
|
|
if (n < 0) {
|
|
fi->type = ARMFault_Background;
|
|
return true;
|
|
}
|
|
|
|
if (access_type == MMU_INST_FETCH) {
|
|
mask = env->cp15.pmsav5_insn_ap;
|
|
} else {
|
|
mask = env->cp15.pmsav5_data_ap;
|
|
}
|
|
mask = (mask >> (n * 4)) & 0xf;
|
|
switch (mask) {
|
|
case 0:
|
|
fi->type = ARMFault_Permission;
|
|
fi->level = 1;
|
|
return true;
|
|
case 1:
|
|
if (is_user) {
|
|
fi->type = ARMFault_Permission;
|
|
fi->level = 1;
|
|
return true;
|
|
}
|
|
result->f.prot = PAGE_READ | PAGE_WRITE;
|
|
break;
|
|
case 2:
|
|
result->f.prot = PAGE_READ;
|
|
if (!is_user) {
|
|
result->f.prot |= PAGE_WRITE;
|
|
}
|
|
break;
|
|
case 3:
|
|
result->f.prot = PAGE_READ | PAGE_WRITE;
|
|
break;
|
|
case 5:
|
|
if (is_user) {
|
|
fi->type = ARMFault_Permission;
|
|
fi->level = 1;
|
|
return true;
|
|
}
|
|
result->f.prot = PAGE_READ;
|
|
break;
|
|
case 6:
|
|
result->f.prot = PAGE_READ;
|
|
break;
|
|
default:
|
|
/* Bad permission. */
|
|
fi->type = ARMFault_Permission;
|
|
fi->level = 1;
|
|
return true;
|
|
}
|
|
result->f.prot |= PAGE_EXEC;
|
|
return false;
|
|
}
|
|
|
|
static void get_phys_addr_pmsav7_default(CPUARMState *env, ARMMMUIdx mmu_idx,
|
|
int32_t address, uint8_t *prot)
|
|
{
|
|
if (!arm_feature(env, ARM_FEATURE_M)) {
|
|
*prot = PAGE_READ | PAGE_WRITE;
|
|
switch (address) {
|
|
case 0xF0000000 ... 0xFFFFFFFF:
|
|
if (regime_sctlr(env, mmu_idx) & SCTLR_V) {
|
|
/* hivecs execing is ok */
|
|
*prot |= PAGE_EXEC;
|
|
}
|
|
break;
|
|
case 0x00000000 ... 0x7FFFFFFF:
|
|
*prot |= PAGE_EXEC;
|
|
break;
|
|
}
|
|
} else {
|
|
/* Default system address map for M profile cores.
|
|
* The architecture specifies which regions are execute-never;
|
|
* at the MPU level no other checks are defined.
|
|
*/
|
|
switch (address) {
|
|
case 0x00000000 ... 0x1fffffff: /* ROM */
|
|
case 0x20000000 ... 0x3fffffff: /* SRAM */
|
|
case 0x60000000 ... 0x7fffffff: /* RAM */
|
|
case 0x80000000 ... 0x9fffffff: /* RAM */
|
|
*prot = PAGE_READ | PAGE_WRITE | PAGE_EXEC;
|
|
break;
|
|
case 0x40000000 ... 0x5fffffff: /* Peripheral */
|
|
case 0xa0000000 ... 0xbfffffff: /* Device */
|
|
case 0xc0000000 ... 0xdfffffff: /* Device */
|
|
case 0xe0000000 ... 0xffffffff: /* System */
|
|
*prot = PAGE_READ | PAGE_WRITE;
|
|
break;
|
|
default:
|
|
g_assert_not_reached();
|
|
}
|
|
}
|
|
}
|
|
|
|
static bool m_is_ppb_region(CPUARMState *env, uint32_t address)
|
|
{
|
|
/* True if address is in the M profile PPB region 0xe0000000 - 0xe00fffff */
|
|
return arm_feature(env, ARM_FEATURE_M) &&
|
|
extract32(address, 20, 12) == 0xe00;
|
|
}
|
|
|
|
static bool m_is_system_region(CPUARMState *env, uint32_t address)
|
|
{
|
|
/*
|
|
* True if address is in the M profile system region
|
|
* 0xe0000000 - 0xffffffff
|
|
*/
|
|
return arm_feature(env, ARM_FEATURE_M) && extract32(address, 29, 3) == 0x7;
|
|
}
|
|
|
|
static bool pmsav7_use_background_region(ARMCPU *cpu, ARMMMUIdx mmu_idx,
|
|
bool is_secure, bool is_user)
|
|
{
|
|
/*
|
|
* Return true if we should use the default memory map as a
|
|
* "background" region if there are no hits against any MPU regions.
|
|
*/
|
|
CPUARMState *env = &cpu->env;
|
|
|
|
if (is_user) {
|
|
return false;
|
|
}
|
|
|
|
if (arm_feature(env, ARM_FEATURE_M)) {
|
|
return env->v7m.mpu_ctrl[is_secure] & R_V7M_MPU_CTRL_PRIVDEFENA_MASK;
|
|
}
|
|
|
|
if (mmu_idx == ARMMMUIdx_Stage2) {
|
|
return false;
|
|
}
|
|
|
|
return regime_sctlr(env, mmu_idx) & SCTLR_BR;
|
|
}
|
|
|
|
static bool get_phys_addr_pmsav7(CPUARMState *env, uint32_t address,
|
|
MMUAccessType access_type, ARMMMUIdx mmu_idx,
|
|
bool secure, GetPhysAddrResult *result,
|
|
ARMMMUFaultInfo *fi)
|
|
{
|
|
ARMCPU *cpu = env_archcpu(env);
|
|
int n;
|
|
bool is_user = regime_is_user(env, mmu_idx);
|
|
|
|
result->f.phys_addr = address;
|
|
result->f.lg_page_size = TARGET_PAGE_BITS;
|
|
result->f.prot = 0;
|
|
|
|
if (regime_translation_disabled(env, mmu_idx, secure) ||
|
|
m_is_ppb_region(env, address)) {
|
|
/*
|
|
* MPU disabled or M profile PPB access: use default memory map.
|
|
* The other case which uses the default memory map in the
|
|
* v7M ARM ARM pseudocode is exception vector reads from the vector
|
|
* table. In QEMU those accesses are done in arm_v7m_load_vector(),
|
|
* which always does a direct read using address_space_ldl(), rather
|
|
* than going via this function, so we don't need to check that here.
|
|
*/
|
|
get_phys_addr_pmsav7_default(env, mmu_idx, address, &result->f.prot);
|
|
} else { /* MPU enabled */
|
|
for (n = (int)cpu->pmsav7_dregion - 1; n >= 0; n--) {
|
|
/* region search */
|
|
uint32_t base = env->pmsav7.drbar[n];
|
|
uint32_t rsize = extract32(env->pmsav7.drsr[n], 1, 5);
|
|
uint32_t rmask;
|
|
bool srdis = false;
|
|
|
|
if (!(env->pmsav7.drsr[n] & 0x1)) {
|
|
continue;
|
|
}
|
|
|
|
if (!rsize) {
|
|
qemu_log_mask(LOG_GUEST_ERROR,
|
|
"DRSR[%d]: Rsize field cannot be 0\n", n);
|
|
continue;
|
|
}
|
|
rsize++;
|
|
rmask = (1ull << rsize) - 1;
|
|
|
|
if (base & rmask) {
|
|
qemu_log_mask(LOG_GUEST_ERROR,
|
|
"DRBAR[%d]: 0x%" PRIx32 " misaligned "
|
|
"to DRSR region size, mask = 0x%" PRIx32 "\n",
|
|
n, base, rmask);
|
|
continue;
|
|
}
|
|
|
|
if (address < base || address > base + rmask) {
|
|
/*
|
|
* Address not in this region. We must check whether the
|
|
* region covers addresses in the same page as our address.
|
|
* In that case we must not report a size that covers the
|
|
* whole page for a subsequent hit against a different MPU
|
|
* region or the background region, because it would result in
|
|
* incorrect TLB hits for subsequent accesses to addresses that
|
|
* are in this MPU region.
|
|
*/
|
|
if (ranges_overlap(base, rmask,
|
|
address & TARGET_PAGE_MASK,
|
|
TARGET_PAGE_SIZE)) {
|
|
result->f.lg_page_size = 0;
|
|
}
|
|
continue;
|
|
}
|
|
|
|
/* Region matched */
|
|
|
|
if (rsize >= 8) { /* no subregions for regions < 256 bytes */
|
|
int i, snd;
|
|
uint32_t srdis_mask;
|
|
|
|
rsize -= 3; /* sub region size (power of 2) */
|
|
snd = ((address - base) >> rsize) & 0x7;
|
|
srdis = extract32(env->pmsav7.drsr[n], snd + 8, 1);
|
|
|
|
srdis_mask = srdis ? 0x3 : 0x0;
|
|
for (i = 2; i <= 8 && rsize < TARGET_PAGE_BITS; i *= 2) {
|
|
/*
|
|
* This will check in groups of 2, 4 and then 8, whether
|
|
* the subregion bits are consistent. rsize is incremented
|
|
* back up to give the region size, considering consistent
|
|
* adjacent subregions as one region. Stop testing if rsize
|
|
* is already big enough for an entire QEMU page.
|
|
*/
|
|
int snd_rounded = snd & ~(i - 1);
|
|
uint32_t srdis_multi = extract32(env->pmsav7.drsr[n],
|
|
snd_rounded + 8, i);
|
|
if (srdis_mask ^ srdis_multi) {
|
|
break;
|
|
}
|
|
srdis_mask = (srdis_mask << i) | srdis_mask;
|
|
rsize++;
|
|
}
|
|
}
|
|
if (srdis) {
|
|
continue;
|
|
}
|
|
if (rsize < TARGET_PAGE_BITS) {
|
|
result->f.lg_page_size = rsize;
|
|
}
|
|
break;
|
|
}
|
|
|
|
if (n == -1) { /* no hits */
|
|
if (!pmsav7_use_background_region(cpu, mmu_idx, secure, is_user)) {
|
|
/* background fault */
|
|
fi->type = ARMFault_Background;
|
|
return true;
|
|
}
|
|
get_phys_addr_pmsav7_default(env, mmu_idx, address,
|
|
&result->f.prot);
|
|
} else { /* a MPU hit! */
|
|
uint32_t ap = extract32(env->pmsav7.dracr[n], 8, 3);
|
|
uint32_t xn = extract32(env->pmsav7.dracr[n], 12, 1);
|
|
|
|
if (m_is_system_region(env, address)) {
|
|
/* System space is always execute never */
|
|
xn = 1;
|
|
}
|
|
|
|
if (is_user) { /* User mode AP bit decoding */
|
|
switch (ap) {
|
|
case 0:
|
|
case 1:
|
|
case 5:
|
|
break; /* no access */
|
|
case 3:
|
|
result->f.prot |= PAGE_WRITE;
|
|
/* fall through */
|
|
case 2:
|
|
case 6:
|
|
result->f.prot |= PAGE_READ | PAGE_EXEC;
|
|
break;
|
|
case 7:
|
|
/* for v7M, same as 6; for R profile a reserved value */
|
|
if (arm_feature(env, ARM_FEATURE_M)) {
|
|
result->f.prot |= PAGE_READ | PAGE_EXEC;
|
|
break;
|
|
}
|
|
/* fall through */
|
|
default:
|
|
qemu_log_mask(LOG_GUEST_ERROR,
|
|
"DRACR[%d]: Bad value for AP bits: 0x%"
|
|
PRIx32 "\n", n, ap);
|
|
}
|
|
} else { /* Priv. mode AP bits decoding */
|
|
switch (ap) {
|
|
case 0:
|
|
break; /* no access */
|
|
case 1:
|
|
case 2:
|
|
case 3:
|
|
result->f.prot |= PAGE_WRITE;
|
|
/* fall through */
|
|
case 5:
|
|
case 6:
|
|
result->f.prot |= PAGE_READ | PAGE_EXEC;
|
|
break;
|
|
case 7:
|
|
/* for v7M, same as 6; for R profile a reserved value */
|
|
if (arm_feature(env, ARM_FEATURE_M)) {
|
|
result->f.prot |= PAGE_READ | PAGE_EXEC;
|
|
break;
|
|
}
|
|
/* fall through */
|
|
default:
|
|
qemu_log_mask(LOG_GUEST_ERROR,
|
|
"DRACR[%d]: Bad value for AP bits: 0x%"
|
|
PRIx32 "\n", n, ap);
|
|
}
|
|
}
|
|
|
|
/* execute never */
|
|
if (xn) {
|
|
result->f.prot &= ~PAGE_EXEC;
|
|
}
|
|
}
|
|
}
|
|
|
|
fi->type = ARMFault_Permission;
|
|
fi->level = 1;
|
|
return !(result->f.prot & (1 << access_type));
|
|
}
|
|
|
|
static uint32_t *regime_rbar(CPUARMState *env, ARMMMUIdx mmu_idx,
|
|
uint32_t secure)
|
|
{
|
|
if (regime_el(env, mmu_idx) == 2) {
|
|
return env->pmsav8.hprbar;
|
|
} else {
|
|
return env->pmsav8.rbar[secure];
|
|
}
|
|
}
|
|
|
|
static uint32_t *regime_rlar(CPUARMState *env, ARMMMUIdx mmu_idx,
|
|
uint32_t secure)
|
|
{
|
|
if (regime_el(env, mmu_idx) == 2) {
|
|
return env->pmsav8.hprlar;
|
|
} else {
|
|
return env->pmsav8.rlar[secure];
|
|
}
|
|
}
|
|
|
|
bool pmsav8_mpu_lookup(CPUARMState *env, uint32_t address,
|
|
MMUAccessType access_type, ARMMMUIdx mmu_idx,
|
|
bool secure, GetPhysAddrResult *result,
|
|
ARMMMUFaultInfo *fi, uint32_t *mregion)
|
|
{
|
|
/*
|
|
* Perform a PMSAv8 MPU lookup (without also doing the SAU check
|
|
* that a full phys-to-virt translation does).
|
|
* mregion is (if not NULL) set to the region number which matched,
|
|
* or -1 if no region number is returned (MPU off, address did not
|
|
* hit a region, address hit in multiple regions).
|
|
* If the region hit doesn't cover the entire TARGET_PAGE the address
|
|
* is within, then we set the result page_size to 1 to force the
|
|
* memory system to use a subpage.
|
|
*/
|
|
ARMCPU *cpu = env_archcpu(env);
|
|
bool is_user = regime_is_user(env, mmu_idx);
|
|
int n;
|
|
int matchregion = -1;
|
|
bool hit = false;
|
|
uint32_t addr_page_base = address & TARGET_PAGE_MASK;
|
|
uint32_t addr_page_limit = addr_page_base + (TARGET_PAGE_SIZE - 1);
|
|
int region_counter;
|
|
|
|
if (regime_el(env, mmu_idx) == 2) {
|
|
region_counter = cpu->pmsav8r_hdregion;
|
|
} else {
|
|
region_counter = cpu->pmsav7_dregion;
|
|
}
|
|
|
|
result->f.lg_page_size = TARGET_PAGE_BITS;
|
|
result->f.phys_addr = address;
|
|
result->f.prot = 0;
|
|
if (mregion) {
|
|
*mregion = -1;
|
|
}
|
|
|
|
if (mmu_idx == ARMMMUIdx_Stage2) {
|
|
fi->stage2 = true;
|
|
}
|
|
|
|
/*
|
|
* Unlike the ARM ARM pseudocode, we don't need to check whether this
|
|
* was an exception vector read from the vector table (which is always
|
|
* done using the default system address map), because those accesses
|
|
* are done in arm_v7m_load_vector(), which always does a direct
|
|
* read using address_space_ldl(), rather than going via this function.
|
|
*/
|
|
if (regime_translation_disabled(env, mmu_idx, secure)) { /* MPU disabled */
|
|
hit = true;
|
|
} else if (m_is_ppb_region(env, address)) {
|
|
hit = true;
|
|
} else {
|
|
if (pmsav7_use_background_region(cpu, mmu_idx, secure, is_user)) {
|
|
hit = true;
|
|
}
|
|
|
|
uint32_t bitmask;
|
|
if (arm_feature(env, ARM_FEATURE_M)) {
|
|
bitmask = 0x1f;
|
|
} else {
|
|
bitmask = 0x3f;
|
|
fi->level = 0;
|
|
}
|
|
|
|
for (n = region_counter - 1; n >= 0; n--) {
|
|
/* region search */
|
|
/*
|
|
* Note that the base address is bits [31:x] from the register
|
|
* with bits [x-1:0] all zeroes, but the limit address is bits
|
|
* [31:x] from the register with bits [x:0] all ones. Where x is
|
|
* 5 for Cortex-M and 6 for Cortex-R
|
|
*/
|
|
uint32_t base = regime_rbar(env, mmu_idx, secure)[n] & ~bitmask;
|
|
uint32_t limit = regime_rlar(env, mmu_idx, secure)[n] | bitmask;
|
|
|
|
if (!(regime_rlar(env, mmu_idx, secure)[n] & 0x1)) {
|
|
/* Region disabled */
|
|
continue;
|
|
}
|
|
|
|
if (address < base || address > limit) {
|
|
/*
|
|
* Address not in this region. We must check whether the
|
|
* region covers addresses in the same page as our address.
|
|
* In that case we must not report a size that covers the
|
|
* whole page for a subsequent hit against a different MPU
|
|
* region or the background region, because it would result in
|
|
* incorrect TLB hits for subsequent accesses to addresses that
|
|
* are in this MPU region.
|
|
*/
|
|
if (limit >= base &&
|
|
ranges_overlap(base, limit - base + 1,
|
|
addr_page_base,
|
|
TARGET_PAGE_SIZE)) {
|
|
result->f.lg_page_size = 0;
|
|
}
|
|
continue;
|
|
}
|
|
|
|
if (base > addr_page_base || limit < addr_page_limit) {
|
|
result->f.lg_page_size = 0;
|
|
}
|
|
|
|
if (matchregion != -1) {
|
|
/*
|
|
* Multiple regions match -- always a failure (unlike
|
|
* PMSAv7 where highest-numbered-region wins)
|
|
*/
|
|
fi->type = ARMFault_Permission;
|
|
if (arm_feature(env, ARM_FEATURE_M)) {
|
|
fi->level = 1;
|
|
}
|
|
return true;
|
|
}
|
|
|
|
matchregion = n;
|
|
hit = true;
|
|
}
|
|
}
|
|
|
|
if (!hit) {
|
|
if (arm_feature(env, ARM_FEATURE_M)) {
|
|
fi->type = ARMFault_Background;
|
|
} else {
|
|
fi->type = ARMFault_Permission;
|
|
}
|
|
return true;
|
|
}
|
|
|
|
if (matchregion == -1) {
|
|
/* hit using the background region */
|
|
get_phys_addr_pmsav7_default(env, mmu_idx, address, &result->f.prot);
|
|
} else {
|
|
uint32_t matched_rbar = regime_rbar(env, mmu_idx, secure)[matchregion];
|
|
uint32_t matched_rlar = regime_rlar(env, mmu_idx, secure)[matchregion];
|
|
uint32_t ap = extract32(matched_rbar, 1, 2);
|
|
uint32_t xn = extract32(matched_rbar, 0, 1);
|
|
bool pxn = false;
|
|
|
|
if (arm_feature(env, ARM_FEATURE_V8_1M)) {
|
|
pxn = extract32(matched_rlar, 4, 1);
|
|
}
|
|
|
|
if (m_is_system_region(env, address)) {
|
|
/* System space is always execute never */
|
|
xn = 1;
|
|
}
|
|
|
|
if (regime_el(env, mmu_idx) == 2) {
|
|
result->f.prot = simple_ap_to_rw_prot_is_user(ap,
|
|
mmu_idx != ARMMMUIdx_E2);
|
|
} else {
|
|
result->f.prot = simple_ap_to_rw_prot(env, mmu_idx, ap);
|
|
}
|
|
|
|
if (!arm_feature(env, ARM_FEATURE_M)) {
|
|
uint8_t attrindx = extract32(matched_rlar, 1, 3);
|
|
uint64_t mair = env->cp15.mair_el[regime_el(env, mmu_idx)];
|
|
uint8_t sh = extract32(matched_rlar, 3, 2);
|
|
|
|
if (regime_sctlr(env, mmu_idx) & SCTLR_WXN &&
|
|
result->f.prot & PAGE_WRITE && mmu_idx != ARMMMUIdx_Stage2) {
|
|
xn = 0x1;
|
|
}
|
|
|
|
if ((regime_el(env, mmu_idx) == 1) &&
|
|
regime_sctlr(env, mmu_idx) & SCTLR_UWXN && ap == 0x1) {
|
|
pxn = 0x1;
|
|
}
|
|
|
|
result->cacheattrs.is_s2_format = false;
|
|
result->cacheattrs.attrs = extract64(mair, attrindx * 8, 8);
|
|
result->cacheattrs.shareability = sh;
|
|
}
|
|
|
|
if (result->f.prot && !xn && !(pxn && !is_user)) {
|
|
result->f.prot |= PAGE_EXEC;
|
|
}
|
|
|
|
if (mregion) {
|
|
*mregion = matchregion;
|
|
}
|
|
}
|
|
|
|
fi->type = ARMFault_Permission;
|
|
if (arm_feature(env, ARM_FEATURE_M)) {
|
|
fi->level = 1;
|
|
}
|
|
return !(result->f.prot & (1 << access_type));
|
|
}
|
|
|
|
static bool v8m_is_sau_exempt(CPUARMState *env,
|
|
uint32_t address, MMUAccessType access_type)
|
|
{
|
|
/*
|
|
* The architecture specifies that certain address ranges are
|
|
* exempt from v8M SAU/IDAU checks.
|
|
*/
|
|
return
|
|
(access_type == MMU_INST_FETCH && m_is_system_region(env, address)) ||
|
|
(address >= 0xe0000000 && address <= 0xe0002fff) ||
|
|
(address >= 0xe000e000 && address <= 0xe000efff) ||
|
|
(address >= 0xe002e000 && address <= 0xe002efff) ||
|
|
(address >= 0xe0040000 && address <= 0xe0041fff) ||
|
|
(address >= 0xe00ff000 && address <= 0xe00fffff);
|
|
}
|
|
|
|
void v8m_security_lookup(CPUARMState *env, uint32_t address,
|
|
MMUAccessType access_type, ARMMMUIdx mmu_idx,
|
|
bool is_secure, V8M_SAttributes *sattrs)
|
|
{
|
|
/*
|
|
* Look up the security attributes for this address. Compare the
|
|
* pseudocode SecurityCheck() function.
|
|
* We assume the caller has zero-initialized *sattrs.
|
|
*/
|
|
ARMCPU *cpu = env_archcpu(env);
|
|
int r;
|
|
bool idau_exempt = false, idau_ns = true, idau_nsc = true;
|
|
int idau_region = IREGION_NOTVALID;
|
|
uint32_t addr_page_base = address & TARGET_PAGE_MASK;
|
|
uint32_t addr_page_limit = addr_page_base + (TARGET_PAGE_SIZE - 1);
|
|
|
|
if (cpu->idau) {
|
|
IDAUInterfaceClass *iic = IDAU_INTERFACE_GET_CLASS(cpu->idau);
|
|
IDAUInterface *ii = IDAU_INTERFACE(cpu->idau);
|
|
|
|
iic->check(ii, address, &idau_region, &idau_exempt, &idau_ns,
|
|
&idau_nsc);
|
|
}
|
|
|
|
if (access_type == MMU_INST_FETCH && extract32(address, 28, 4) == 0xf) {
|
|
/* 0xf0000000..0xffffffff is always S for insn fetches */
|
|
return;
|
|
}
|
|
|
|
if (idau_exempt || v8m_is_sau_exempt(env, address, access_type)) {
|
|
sattrs->ns = !is_secure;
|
|
return;
|
|
}
|
|
|
|
if (idau_region != IREGION_NOTVALID) {
|
|
sattrs->irvalid = true;
|
|
sattrs->iregion = idau_region;
|
|
}
|
|
|
|
switch (env->sau.ctrl & 3) {
|
|
case 0: /* SAU.ENABLE == 0, SAU.ALLNS == 0 */
|
|
break;
|
|
case 2: /* SAU.ENABLE == 0, SAU.ALLNS == 1 */
|
|
sattrs->ns = true;
|
|
break;
|
|
default: /* SAU.ENABLE == 1 */
|
|
for (r = 0; r < cpu->sau_sregion; r++) {
|
|
if (env->sau.rlar[r] & 1) {
|
|
uint32_t base = env->sau.rbar[r] & ~0x1f;
|
|
uint32_t limit = env->sau.rlar[r] | 0x1f;
|
|
|
|
if (base <= address && limit >= address) {
|
|
if (base > addr_page_base || limit < addr_page_limit) {
|
|
sattrs->subpage = true;
|
|
}
|
|
if (sattrs->srvalid) {
|
|
/*
|
|
* If we hit in more than one region then we must report
|
|
* as Secure, not NS-Callable, with no valid region
|
|
* number info.
|
|
*/
|
|
sattrs->ns = false;
|
|
sattrs->nsc = false;
|
|
sattrs->sregion = 0;
|
|
sattrs->srvalid = false;
|
|
break;
|
|
} else {
|
|
if (env->sau.rlar[r] & 2) {
|
|
sattrs->nsc = true;
|
|
} else {
|
|
sattrs->ns = true;
|
|
}
|
|
sattrs->srvalid = true;
|
|
sattrs->sregion = r;
|
|
}
|
|
} else {
|
|
/*
|
|
* Address not in this region. We must check whether the
|
|
* region covers addresses in the same page as our address.
|
|
* In that case we must not report a size that covers the
|
|
* whole page for a subsequent hit against a different MPU
|
|
* region or the background region, because it would result
|
|
* in incorrect TLB hits for subsequent accesses to
|
|
* addresses that are in this MPU region.
|
|
*/
|
|
if (limit >= base &&
|
|
ranges_overlap(base, limit - base + 1,
|
|
addr_page_base,
|
|
TARGET_PAGE_SIZE)) {
|
|
sattrs->subpage = true;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
break;
|
|
}
|
|
|
|
/*
|
|
* The IDAU will override the SAU lookup results if it specifies
|
|
* higher security than the SAU does.
|
|
*/
|
|
if (!idau_ns) {
|
|
if (sattrs->ns || (!idau_nsc && sattrs->nsc)) {
|
|
sattrs->ns = false;
|
|
sattrs->nsc = idau_nsc;
|
|
}
|
|
}
|
|
}
|
|
|
|
static bool get_phys_addr_pmsav8(CPUARMState *env, uint32_t address,
|
|
MMUAccessType access_type, ARMMMUIdx mmu_idx,
|
|
bool secure, GetPhysAddrResult *result,
|
|
ARMMMUFaultInfo *fi)
|
|
{
|
|
V8M_SAttributes sattrs = {};
|
|
bool ret;
|
|
|
|
if (arm_feature(env, ARM_FEATURE_M_SECURITY)) {
|
|
v8m_security_lookup(env, address, access_type, mmu_idx,
|
|
secure, &sattrs);
|
|
if (access_type == MMU_INST_FETCH) {
|
|
/*
|
|
* Instruction fetches always use the MMU bank and the
|
|
* transaction attribute determined by the fetch address,
|
|
* regardless of CPU state. This is painful for QEMU
|
|
* to handle, because it would mean we need to encode
|
|
* into the mmu_idx not just the (user, negpri) information
|
|
* for the current security state but also that for the
|
|
* other security state, which would balloon the number
|
|
* of mmu_idx values needed alarmingly.
|
|
* Fortunately we can avoid this because it's not actually
|
|
* possible to arbitrarily execute code from memory with
|
|
* the wrong security attribute: it will always generate
|
|
* an exception of some kind or another, apart from the
|
|
* special case of an NS CPU executing an SG instruction
|
|
* in S&NSC memory. So we always just fail the translation
|
|
* here and sort things out in the exception handler
|
|
* (including possibly emulating an SG instruction).
|
|
*/
|
|
if (sattrs.ns != !secure) {
|
|
if (sattrs.nsc) {
|
|
fi->type = ARMFault_QEMU_NSCExec;
|
|
} else {
|
|
fi->type = ARMFault_QEMU_SFault;
|
|
}
|
|
result->f.lg_page_size = sattrs.subpage ? 0 : TARGET_PAGE_BITS;
|
|
result->f.phys_addr = address;
|
|
result->f.prot = 0;
|
|
return true;
|
|
}
|
|
} else {
|
|
/*
|
|
* For data accesses we always use the MMU bank indicated
|
|
* by the current CPU state, but the security attributes
|
|
* might downgrade a secure access to nonsecure.
|
|
*/
|
|
if (sattrs.ns) {
|
|
result->f.attrs.secure = false;
|
|
} else if (!secure) {
|
|
/*
|
|
* NS access to S memory must fault.
|
|
* Architecturally we should first check whether the
|
|
* MPU information for this address indicates that we
|
|
* are doing an unaligned access to Device memory, which
|
|
* should generate a UsageFault instead. QEMU does not
|
|
* currently check for that kind of unaligned access though.
|
|
* If we added it we would need to do so as a special case
|
|
* for M_FAKE_FSR_SFAULT in arm_v7m_cpu_do_interrupt().
|
|
*/
|
|
fi->type = ARMFault_QEMU_SFault;
|
|
result->f.lg_page_size = sattrs.subpage ? 0 : TARGET_PAGE_BITS;
|
|
result->f.phys_addr = address;
|
|
result->f.prot = 0;
|
|
return true;
|
|
}
|
|
}
|
|
}
|
|
|
|
ret = pmsav8_mpu_lookup(env, address, access_type, mmu_idx, secure,
|
|
result, fi, NULL);
|
|
if (sattrs.subpage) {
|
|
result->f.lg_page_size = 0;
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* Translate from the 4-bit stage 2 representation of
|
|
* memory attributes (without cache-allocation hints) to
|
|
* the 8-bit representation of the stage 1 MAIR registers
|
|
* (which includes allocation hints).
|
|
*
|
|
* ref: shared/translation/attrs/S2AttrDecode()
|
|
* .../S2ConvertAttrsHints()
|
|
*/
|
|
static uint8_t convert_stage2_attrs(uint64_t hcr, uint8_t s2attrs)
|
|
{
|
|
uint8_t hiattr = extract32(s2attrs, 2, 2);
|
|
uint8_t loattr = extract32(s2attrs, 0, 2);
|
|
uint8_t hihint = 0, lohint = 0;
|
|
|
|
if (hiattr != 0) { /* normal memory */
|
|
if (hcr & HCR_CD) { /* cache disabled */
|
|
hiattr = loattr = 1; /* non-cacheable */
|
|
} else {
|
|
if (hiattr != 1) { /* Write-through or write-back */
|
|
hihint = 3; /* RW allocate */
|
|
}
|
|
if (loattr != 1) { /* Write-through or write-back */
|
|
lohint = 3; /* RW allocate */
|
|
}
|
|
}
|
|
}
|
|
|
|
return (hiattr << 6) | (hihint << 4) | (loattr << 2) | lohint;
|
|
}
|
|
|
|
/*
|
|
* Combine either inner or outer cacheability attributes for normal
|
|
* memory, according to table D4-42 and pseudocode procedure
|
|
* CombineS1S2AttrHints() of ARM DDI 0487B.b (the ARMv8 ARM).
|
|
*
|
|
* NB: only stage 1 includes allocation hints (RW bits), leading to
|
|
* some asymmetry.
|
|
*/
|
|
static uint8_t combine_cacheattr_nibble(uint8_t s1, uint8_t s2)
|
|
{
|
|
if (s1 == 4 || s2 == 4) {
|
|
/* non-cacheable has precedence */
|
|
return 4;
|
|
} else if (extract32(s1, 2, 2) == 0 || extract32(s1, 2, 2) == 2) {
|
|
/* stage 1 write-through takes precedence */
|
|
return s1;
|
|
} else if (extract32(s2, 2, 2) == 2) {
|
|
/* stage 2 write-through takes precedence, but the allocation hint
|
|
* is still taken from stage 1
|
|
*/
|
|
return (2 << 2) | extract32(s1, 0, 2);
|
|
} else { /* write-back */
|
|
return s1;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Combine the memory type and cacheability attributes of
|
|
* s1 and s2 for the HCR_EL2.FWB == 0 case, returning the
|
|
* combined attributes in MAIR_EL1 format.
|
|
*/
|
|
static uint8_t combined_attrs_nofwb(uint64_t hcr,
|
|
ARMCacheAttrs s1, ARMCacheAttrs s2)
|
|
{
|
|
uint8_t s1lo, s2lo, s1hi, s2hi, s2_mair_attrs, ret_attrs;
|
|
|
|
if (s2.is_s2_format) {
|
|
s2_mair_attrs = convert_stage2_attrs(hcr, s2.attrs);
|
|
} else {
|
|
s2_mair_attrs = s2.attrs;
|
|
}
|
|
|
|
s1lo = extract32(s1.attrs, 0, 4);
|
|
s2lo = extract32(s2_mair_attrs, 0, 4);
|
|
s1hi = extract32(s1.attrs, 4, 4);
|
|
s2hi = extract32(s2_mair_attrs, 4, 4);
|
|
|
|
/* Combine memory type and cacheability attributes */
|
|
if (s1hi == 0 || s2hi == 0) {
|
|
/* Device has precedence over normal */
|
|
if (s1lo == 0 || s2lo == 0) {
|
|
/* nGnRnE has precedence over anything */
|
|
ret_attrs = 0;
|
|
} else if (s1lo == 4 || s2lo == 4) {
|
|
/* non-Reordering has precedence over Reordering */
|
|
ret_attrs = 4; /* nGnRE */
|
|
} else if (s1lo == 8 || s2lo == 8) {
|
|
/* non-Gathering has precedence over Gathering */
|
|
ret_attrs = 8; /* nGRE */
|
|
} else {
|
|
ret_attrs = 0xc; /* GRE */
|
|
}
|
|
} else { /* Normal memory */
|
|
/* Outer/inner cacheability combine independently */
|
|
ret_attrs = combine_cacheattr_nibble(s1hi, s2hi) << 4
|
|
| combine_cacheattr_nibble(s1lo, s2lo);
|
|
}
|
|
return ret_attrs;
|
|
}
|
|
|
|
static uint8_t force_cacheattr_nibble_wb(uint8_t attr)
|
|
{
|
|
/*
|
|
* Given the 4 bits specifying the outer or inner cacheability
|
|
* in MAIR format, return a value specifying Normal Write-Back,
|
|
* with the allocation and transient hints taken from the input
|
|
* if the input specified some kind of cacheable attribute.
|
|
*/
|
|
if (attr == 0 || attr == 4) {
|
|
/*
|
|
* 0 == an UNPREDICTABLE encoding
|
|
* 4 == Non-cacheable
|
|
* Either way, force Write-Back RW allocate non-transient
|
|
*/
|
|
return 0xf;
|
|
}
|
|
/* Change WriteThrough to WriteBack, keep allocation and transient hints */
|
|
return attr | 4;
|
|
}
|
|
|
|
/*
|
|
* Combine the memory type and cacheability attributes of
|
|
* s1 and s2 for the HCR_EL2.FWB == 1 case, returning the
|
|
* combined attributes in MAIR_EL1 format.
|
|
*/
|
|
static uint8_t combined_attrs_fwb(ARMCacheAttrs s1, ARMCacheAttrs s2)
|
|
{
|
|
assert(s2.is_s2_format && !s1.is_s2_format);
|
|
|
|
switch (s2.attrs) {
|
|
case 7:
|
|
/* Use stage 1 attributes */
|
|
return s1.attrs;
|
|
case 6:
|
|
/*
|
|
* Force Normal Write-Back. Note that if S1 is Normal cacheable
|
|
* then we take the allocation hints from it; otherwise it is
|
|
* RW allocate, non-transient.
|
|
*/
|
|
if ((s1.attrs & 0xf0) == 0) {
|
|
/* S1 is Device */
|
|
return 0xff;
|
|
}
|
|
/* Need to check the Inner and Outer nibbles separately */
|
|
return force_cacheattr_nibble_wb(s1.attrs & 0xf) |
|
|
force_cacheattr_nibble_wb(s1.attrs >> 4) << 4;
|
|
case 5:
|
|
/* If S1 attrs are Device, use them; otherwise Normal Non-cacheable */
|
|
if ((s1.attrs & 0xf0) == 0) {
|
|
return s1.attrs;
|
|
}
|
|
return 0x44;
|
|
case 0 ... 3:
|
|
/* Force Device, of subtype specified by S2 */
|
|
return s2.attrs << 2;
|
|
default:
|
|
/*
|
|
* RESERVED values (including RES0 descriptor bit [5] being nonzero);
|
|
* arbitrarily force Device.
|
|
*/
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Combine S1 and S2 cacheability/shareability attributes, per D4.5.4
|
|
* and CombineS1S2Desc()
|
|
*
|
|
* @env: CPUARMState
|
|
* @s1: Attributes from stage 1 walk
|
|
* @s2: Attributes from stage 2 walk
|
|
*/
|
|
static ARMCacheAttrs combine_cacheattrs(uint64_t hcr,
|
|
ARMCacheAttrs s1, ARMCacheAttrs s2)
|
|
{
|
|
ARMCacheAttrs ret;
|
|
bool tagged = false;
|
|
|
|
assert(!s1.is_s2_format);
|
|
ret.is_s2_format = false;
|
|
ret.guarded = s1.guarded;
|
|
|
|
if (s1.attrs == 0xf0) {
|
|
tagged = true;
|
|
s1.attrs = 0xff;
|
|
}
|
|
|
|
/* Combine shareability attributes (table D4-43) */
|
|
if (s1.shareability == 2 || s2.shareability == 2) {
|
|
/* if either are outer-shareable, the result is outer-shareable */
|
|
ret.shareability = 2;
|
|
} else if (s1.shareability == 3 || s2.shareability == 3) {
|
|
/* if either are inner-shareable, the result is inner-shareable */
|
|
ret.shareability = 3;
|
|
} else {
|
|
/* both non-shareable */
|
|
ret.shareability = 0;
|
|
}
|
|
|
|
/* Combine memory type and cacheability attributes */
|
|
if (hcr & HCR_FWB) {
|
|
ret.attrs = combined_attrs_fwb(s1, s2);
|
|
} else {
|
|
ret.attrs = combined_attrs_nofwb(hcr, s1, s2);
|
|
}
|
|
|
|
/*
|
|
* Any location for which the resultant memory type is any
|
|
* type of Device memory is always treated as Outer Shareable.
|
|
* Any location for which the resultant memory type is Normal
|
|
* Inner Non-cacheable, Outer Non-cacheable is always treated
|
|
* as Outer Shareable.
|
|
* TODO: FEAT_XS adds another value (0x40) also meaning iNCoNC
|
|
*/
|
|
if ((ret.attrs & 0xf0) == 0 || ret.attrs == 0x44) {
|
|
ret.shareability = 2;
|
|
}
|
|
|
|
/* TODO: CombineS1S2Desc does not consider transient, only WB, RWA. */
|
|
if (tagged && ret.attrs == 0xff) {
|
|
ret.attrs = 0xf0;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* MMU disabled. S1 addresses within aa64 translation regimes are
|
|
* still checked for bounds -- see AArch64.S1DisabledOutput().
|
|
*/
|
|
static bool get_phys_addr_disabled(CPUARMState *env, target_ulong address,
|
|
MMUAccessType access_type,
|
|
ARMMMUIdx mmu_idx, bool is_secure,
|
|
GetPhysAddrResult *result,
|
|
ARMMMUFaultInfo *fi)
|
|
{
|
|
uint8_t memattr = 0x00; /* Device nGnRnE */
|
|
uint8_t shareability = 0; /* non-sharable */
|
|
int r_el;
|
|
|
|
switch (mmu_idx) {
|
|
case ARMMMUIdx_Stage2:
|
|
case ARMMMUIdx_Stage2_S:
|
|
case ARMMMUIdx_Phys_NS:
|
|
case ARMMMUIdx_Phys_S:
|
|
break;
|
|
|
|
default:
|
|
r_el = regime_el(env, mmu_idx);
|
|
if (arm_el_is_aa64(env, r_el)) {
|
|
int pamax = arm_pamax(env_archcpu(env));
|
|
uint64_t tcr = env->cp15.tcr_el[r_el];
|
|
int addrtop, tbi;
|
|
|
|
tbi = aa64_va_parameter_tbi(tcr, mmu_idx);
|
|
if (access_type == MMU_INST_FETCH) {
|
|
tbi &= ~aa64_va_parameter_tbid(tcr, mmu_idx);
|
|
}
|
|
tbi = (tbi >> extract64(address, 55, 1)) & 1;
|
|
addrtop = (tbi ? 55 : 63);
|
|
|
|
if (extract64(address, pamax, addrtop - pamax + 1) != 0) {
|
|
fi->type = ARMFault_AddressSize;
|
|
fi->level = 0;
|
|
fi->stage2 = false;
|
|
return 1;
|
|
}
|
|
|
|
/*
|
|
* When TBI is disabled, we've just validated that all of the
|
|
* bits above PAMax are zero, so logically we only need to
|
|
* clear the top byte for TBI. But it's clearer to follow
|
|
* the pseudocode set of addrdesc.paddress.
|
|
*/
|
|
address = extract64(address, 0, 52);
|
|
}
|
|
|
|
/* Fill in cacheattr a-la AArch64.TranslateAddressS1Off. */
|
|
if (r_el == 1) {
|
|
uint64_t hcr = arm_hcr_el2_eff_secstate(env, is_secure);
|
|
if (hcr & HCR_DC) {
|
|
if (hcr & HCR_DCT) {
|
|
memattr = 0xf0; /* Tagged, Normal, WB, RWA */
|
|
} else {
|
|
memattr = 0xff; /* Normal, WB, RWA */
|
|
}
|
|
}
|
|
}
|
|
if (memattr == 0 && access_type == MMU_INST_FETCH) {
|
|
if (regime_sctlr(env, mmu_idx) & SCTLR_I) {
|
|
memattr = 0xee; /* Normal, WT, RA, NT */
|
|
} else {
|
|
memattr = 0x44; /* Normal, NC, No */
|
|
}
|
|
shareability = 2; /* outer sharable */
|
|
}
|
|
result->cacheattrs.is_s2_format = false;
|
|
break;
|
|
}
|
|
|
|
result->f.phys_addr = address;
|
|
result->f.prot = PAGE_READ | PAGE_WRITE | PAGE_EXEC;
|
|
result->f.lg_page_size = TARGET_PAGE_BITS;
|
|
result->cacheattrs.shareability = shareability;
|
|
result->cacheattrs.attrs = memattr;
|
|
return false;
|
|
}
|
|
|
|
static bool get_phys_addr_twostage(CPUARMState *env, S1Translate *ptw,
|
|
target_ulong address,
|
|
MMUAccessType access_type,
|
|
GetPhysAddrResult *result,
|
|
ARMMMUFaultInfo *fi)
|
|
{
|
|
hwaddr ipa;
|
|
int s1_prot, s1_lgpgsz;
|
|
bool is_secure = ptw->in_secure;
|
|
bool ret, ipa_secure;
|
|
ARMCacheAttrs cacheattrs1;
|
|
bool is_el0;
|
|
uint64_t hcr;
|
|
|
|
ret = get_phys_addr_with_struct(env, ptw, address, access_type, result, fi);
|
|
|
|
/* If S1 fails, return early. */
|
|
if (ret) {
|
|
return ret;
|
|
}
|
|
|
|
ipa = result->f.phys_addr;
|
|
ipa_secure = result->f.attrs.secure;
|
|
|
|
is_el0 = ptw->in_mmu_idx == ARMMMUIdx_Stage1_E0;
|
|
ptw->in_mmu_idx = ipa_secure ? ARMMMUIdx_Stage2_S : ARMMMUIdx_Stage2;
|
|
ptw->in_secure = ipa_secure;
|
|
ptw->in_ptw_idx = ptw_idx_for_stage_2(env, ptw->in_mmu_idx);
|
|
|
|
/*
|
|
* S1 is done, now do S2 translation.
|
|
* Save the stage1 results so that we may merge prot and cacheattrs later.
|
|
*/
|
|
s1_prot = result->f.prot;
|
|
s1_lgpgsz = result->f.lg_page_size;
|
|
cacheattrs1 = result->cacheattrs;
|
|
memset(result, 0, sizeof(*result));
|
|
|
|
if (arm_feature(env, ARM_FEATURE_PMSA)) {
|
|
ret = get_phys_addr_pmsav8(env, ipa, access_type,
|
|
ptw->in_mmu_idx, is_secure, result, fi);
|
|
} else {
|
|
ret = get_phys_addr_lpae(env, ptw, ipa, access_type,
|
|
is_el0, result, fi);
|
|
}
|
|
fi->s2addr = ipa;
|
|
|
|
/* Combine the S1 and S2 perms. */
|
|
result->f.prot &= s1_prot;
|
|
|
|
/* If S2 fails, return early. */
|
|
if (ret) {
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* If either S1 or S2 returned a result smaller than TARGET_PAGE_SIZE,
|
|
* this means "don't put this in the TLB"; in this case, return a
|
|
* result with lg_page_size == 0 to achieve that. Otherwise,
|
|
* use the maximum of the S1 & S2 page size, so that invalidation
|
|
* of pages > TARGET_PAGE_SIZE works correctly. (This works even though
|
|
* we know the combined result permissions etc only cover the minimum
|
|
* of the S1 and S2 page size, because we know that the common TLB code
|
|
* never actually creates TLB entries bigger than TARGET_PAGE_SIZE,
|
|
* and passing a larger page size value only affects invalidations.)
|
|
*/
|
|
if (result->f.lg_page_size < TARGET_PAGE_BITS ||
|
|
s1_lgpgsz < TARGET_PAGE_BITS) {
|
|
result->f.lg_page_size = 0;
|
|
} else if (result->f.lg_page_size < s1_lgpgsz) {
|
|
result->f.lg_page_size = s1_lgpgsz;
|
|
}
|
|
|
|
/* Combine the S1 and S2 cache attributes. */
|
|
hcr = arm_hcr_el2_eff_secstate(env, is_secure);
|
|
if (hcr & HCR_DC) {
|
|
/*
|
|
* HCR.DC forces the first stage attributes to
|
|
* Normal Non-Shareable,
|
|
* Inner Write-Back Read-Allocate Write-Allocate,
|
|
* Outer Write-Back Read-Allocate Write-Allocate.
|
|
* Do not overwrite Tagged within attrs.
|
|
*/
|
|
if (cacheattrs1.attrs != 0xf0) {
|
|
cacheattrs1.attrs = 0xff;
|
|
}
|
|
cacheattrs1.shareability = 0;
|
|
}
|
|
result->cacheattrs = combine_cacheattrs(hcr, cacheattrs1,
|
|
result->cacheattrs);
|
|
|
|
/*
|
|
* Check if IPA translates to secure or non-secure PA space.
|
|
* Note that VSTCR overrides VTCR and {N}SW overrides {N}SA.
|
|
*/
|
|
result->f.attrs.secure =
|
|
(is_secure
|
|
&& !(env->cp15.vstcr_el2 & (VSTCR_SA | VSTCR_SW))
|
|
&& (ipa_secure
|
|
|| !(env->cp15.vtcr_el2 & (VTCR_NSA | VTCR_NSW))));
|
|
|
|
return false;
|
|
}
|
|
|
|
static bool get_phys_addr_with_struct(CPUARMState *env, S1Translate *ptw,
|
|
target_ulong address,
|
|
MMUAccessType access_type,
|
|
GetPhysAddrResult *result,
|
|
ARMMMUFaultInfo *fi)
|
|
{
|
|
ARMMMUIdx mmu_idx = ptw->in_mmu_idx;
|
|
bool is_secure = ptw->in_secure;
|
|
ARMMMUIdx s1_mmu_idx;
|
|
|
|
/*
|
|
* The page table entries may downgrade secure to non-secure, but
|
|
* cannot upgrade an non-secure translation regime's attributes
|
|
* to secure.
|
|
*/
|
|
result->f.attrs.secure = is_secure;
|
|
|
|
switch (mmu_idx) {
|
|
case ARMMMUIdx_Phys_S:
|
|
case ARMMMUIdx_Phys_NS:
|
|
/* Checking Phys early avoids special casing later vs regime_el. */
|
|
return get_phys_addr_disabled(env, address, access_type, mmu_idx,
|
|
is_secure, result, fi);
|
|
|
|
case ARMMMUIdx_Stage1_E0:
|
|
case ARMMMUIdx_Stage1_E1:
|
|
case ARMMMUIdx_Stage1_E1_PAN:
|
|
/* First stage lookup uses second stage for ptw. */
|
|
ptw->in_ptw_idx = is_secure ? ARMMMUIdx_Stage2_S : ARMMMUIdx_Stage2;
|
|
break;
|
|
|
|
case ARMMMUIdx_Stage2:
|
|
case ARMMMUIdx_Stage2_S:
|
|
/*
|
|
* Second stage lookup uses physical for ptw; whether this is S or
|
|
* NS may depend on the SW/NSW bits if this is a stage 2 lookup for
|
|
* the Secure EL2&0 regime.
|
|
*/
|
|
ptw->in_ptw_idx = ptw_idx_for_stage_2(env, mmu_idx);
|
|
break;
|
|
|
|
case ARMMMUIdx_E10_0:
|
|
s1_mmu_idx = ARMMMUIdx_Stage1_E0;
|
|
goto do_twostage;
|
|
case ARMMMUIdx_E10_1:
|
|
s1_mmu_idx = ARMMMUIdx_Stage1_E1;
|
|
goto do_twostage;
|
|
case ARMMMUIdx_E10_1_PAN:
|
|
s1_mmu_idx = ARMMMUIdx_Stage1_E1_PAN;
|
|
do_twostage:
|
|
/*
|
|
* Call ourselves recursively to do the stage 1 and then stage 2
|
|
* translations if mmu_idx is a two-stage regime, and EL2 present.
|
|
* Otherwise, a stage1+stage2 translation is just stage 1.
|
|
*/
|
|
ptw->in_mmu_idx = mmu_idx = s1_mmu_idx;
|
|
if (arm_feature(env, ARM_FEATURE_EL2) &&
|
|
!regime_translation_disabled(env, ARMMMUIdx_Stage2, is_secure)) {
|
|
return get_phys_addr_twostage(env, ptw, address, access_type,
|
|
result, fi);
|
|
}
|
|
/* fall through */
|
|
|
|
default:
|
|
/* Single stage uses physical for ptw. */
|
|
ptw->in_ptw_idx = is_secure ? ARMMMUIdx_Phys_S : ARMMMUIdx_Phys_NS;
|
|
break;
|
|
}
|
|
|
|
result->f.attrs.user = regime_is_user(env, mmu_idx);
|
|
|
|
/*
|
|
* Fast Context Switch Extension. This doesn't exist at all in v8.
|
|
* In v7 and earlier it affects all stage 1 translations.
|
|
*/
|
|
if (address < 0x02000000 && mmu_idx != ARMMMUIdx_Stage2
|
|
&& !arm_feature(env, ARM_FEATURE_V8)) {
|
|
if (regime_el(env, mmu_idx) == 3) {
|
|
address += env->cp15.fcseidr_s;
|
|
} else {
|
|
address += env->cp15.fcseidr_ns;
|
|
}
|
|
}
|
|
|
|
if (arm_feature(env, ARM_FEATURE_PMSA)) {
|
|
bool ret;
|
|
result->f.lg_page_size = TARGET_PAGE_BITS;
|
|
|
|
if (arm_feature(env, ARM_FEATURE_V8)) {
|
|
/* PMSAv8 */
|
|
ret = get_phys_addr_pmsav8(env, address, access_type, mmu_idx,
|
|
is_secure, result, fi);
|
|
} else if (arm_feature(env, ARM_FEATURE_V7)) {
|
|
/* PMSAv7 */
|
|
ret = get_phys_addr_pmsav7(env, address, access_type, mmu_idx,
|
|
is_secure, result, fi);
|
|
} else {
|
|
/* Pre-v7 MPU */
|
|
ret = get_phys_addr_pmsav5(env, address, access_type, mmu_idx,
|
|
is_secure, result, fi);
|
|
}
|
|
qemu_log_mask(CPU_LOG_MMU, "PMSA MPU lookup for %s at 0x%08" PRIx32
|
|
" mmu_idx %u -> %s (prot %c%c%c)\n",
|
|
access_type == MMU_DATA_LOAD ? "reading" :
|
|
(access_type == MMU_DATA_STORE ? "writing" : "execute"),
|
|
(uint32_t)address, mmu_idx,
|
|
ret ? "Miss" : "Hit",
|
|
result->f.prot & PAGE_READ ? 'r' : '-',
|
|
result->f.prot & PAGE_WRITE ? 'w' : '-',
|
|
result->f.prot & PAGE_EXEC ? 'x' : '-');
|
|
|
|
return ret;
|
|
}
|
|
|
|
/* Definitely a real MMU, not an MPU */
|
|
|
|
if (regime_translation_disabled(env, mmu_idx, is_secure)) {
|
|
return get_phys_addr_disabled(env, address, access_type, mmu_idx,
|
|
is_secure, result, fi);
|
|
}
|
|
|
|
if (regime_using_lpae_format(env, mmu_idx)) {
|
|
return get_phys_addr_lpae(env, ptw, address, access_type, false,
|
|
result, fi);
|
|
} else if (arm_feature(env, ARM_FEATURE_V7) ||
|
|
regime_sctlr(env, mmu_idx) & SCTLR_XP) {
|
|
return get_phys_addr_v6(env, ptw, address, access_type, result, fi);
|
|
} else {
|
|
return get_phys_addr_v5(env, ptw, address, access_type, result, fi);
|
|
}
|
|
}
|
|
|
|
bool get_phys_addr_with_secure(CPUARMState *env, target_ulong address,
|
|
MMUAccessType access_type, ARMMMUIdx mmu_idx,
|
|
bool is_secure, GetPhysAddrResult *result,
|
|
ARMMMUFaultInfo *fi)
|
|
{
|
|
S1Translate ptw = {
|
|
.in_mmu_idx = mmu_idx,
|
|
.in_secure = is_secure,
|
|
};
|
|
return get_phys_addr_with_struct(env, &ptw, address, access_type,
|
|
result, fi);
|
|
}
|
|
|
|
bool get_phys_addr(CPUARMState *env, target_ulong address,
|
|
MMUAccessType access_type, ARMMMUIdx mmu_idx,
|
|
GetPhysAddrResult *result, ARMMMUFaultInfo *fi)
|
|
{
|
|
bool is_secure;
|
|
|
|
switch (mmu_idx) {
|
|
case ARMMMUIdx_E10_0:
|
|
case ARMMMUIdx_E10_1:
|
|
case ARMMMUIdx_E10_1_PAN:
|
|
case ARMMMUIdx_E20_0:
|
|
case ARMMMUIdx_E20_2:
|
|
case ARMMMUIdx_E20_2_PAN:
|
|
case ARMMMUIdx_Stage1_E0:
|
|
case ARMMMUIdx_Stage1_E1:
|
|
case ARMMMUIdx_Stage1_E1_PAN:
|
|
case ARMMMUIdx_E2:
|
|
is_secure = arm_is_secure_below_el3(env);
|
|
break;
|
|
case ARMMMUIdx_Stage2:
|
|
case ARMMMUIdx_Phys_NS:
|
|
case ARMMMUIdx_MPrivNegPri:
|
|
case ARMMMUIdx_MUserNegPri:
|
|
case ARMMMUIdx_MPriv:
|
|
case ARMMMUIdx_MUser:
|
|
is_secure = false;
|
|
break;
|
|
case ARMMMUIdx_E3:
|
|
case ARMMMUIdx_Stage2_S:
|
|
case ARMMMUIdx_Phys_S:
|
|
case ARMMMUIdx_MSPrivNegPri:
|
|
case ARMMMUIdx_MSUserNegPri:
|
|
case ARMMMUIdx_MSPriv:
|
|
case ARMMMUIdx_MSUser:
|
|
is_secure = true;
|
|
break;
|
|
default:
|
|
g_assert_not_reached();
|
|
}
|
|
return get_phys_addr_with_secure(env, address, access_type, mmu_idx,
|
|
is_secure, result, fi);
|
|
}
|
|
|
|
hwaddr arm_cpu_get_phys_page_attrs_debug(CPUState *cs, vaddr addr,
|
|
MemTxAttrs *attrs)
|
|
{
|
|
ARMCPU *cpu = ARM_CPU(cs);
|
|
CPUARMState *env = &cpu->env;
|
|
S1Translate ptw = {
|
|
.in_mmu_idx = arm_mmu_idx(env),
|
|
.in_secure = arm_is_secure(env),
|
|
.in_debug = true,
|
|
};
|
|
GetPhysAddrResult res = {};
|
|
ARMMMUFaultInfo fi = {};
|
|
bool ret;
|
|
|
|
ret = get_phys_addr_with_struct(env, &ptw, addr, MMU_DATA_LOAD, &res, &fi);
|
|
*attrs = res.f.attrs;
|
|
|
|
if (ret) {
|
|
return -1;
|
|
}
|
|
return res.f.phys_addr;
|
|
}
|