qemu/linux-user
Emilio G. Cota 3468b59e18 tcg: enable multiple TCG contexts in softmmu
This enables parallel TCG code generation. However, we do not take
advantage of it yet since tb_lock is still held during tb_gen_code.

In user-mode we use a single TCG context; see the documentation
added to tcg_region_init for the rationale.

Note that targets do not need any conversion: targets initialize a
TCGContext (e.g. defining TCG globals), and after this initialization
has finished, the context is cloned by the vCPU threads, each of
them keeping a separate copy.

TCG threads claim one entry in tcg_ctxs[] by atomically increasing
n_tcg_ctxs. Do not be too annoyed by the subsequent atomic_read's
of that variable and tcg_ctxs; they are there just to play nice with
analysis tools such as thread sanitizer.

Note that we do not allocate an array of contexts (we allocate
an array of pointers instead) because when tcg_context_init
is called, we do not know yet how many contexts we'll use since
the bool behind qemu_tcg_mttcg_enabled() isn't set yet.

Previous patches folded some TCG globals into TCGContext. The non-const
globals remaining are only set at init time, i.e. before the TCG
threads are spawned. Here is a list of these set-at-init-time globals
under tcg/:

Only written by tcg_context_init:
- indirect_reg_alloc_order
- tcg_op_defs
Only written by tcg_target_init (called from tcg_context_init):
- tcg_target_available_regs
- tcg_target_call_clobber_regs
- arm: arm_arch, use_idiv_instructions
- i386: have_cmov, have_bmi1, have_bmi2, have_lzcnt,
        have_movbe, have_popcnt
- mips: use_movnz_instructions, use_mips32_instructions,
        use_mips32r2_instructions, got_sigill (tcg_target_detect_isa)
- ppc: have_isa_2_06, have_isa_3_00, tb_ret_addr
- s390: tb_ret_addr, s390_facilities
- sparc: qemu_ld_trampoline, qemu_st_trampoline (build_trampolines),
         use_vis3_instructions

Only written by tcg_prologue_init:
- 'struct jit_code_entry one_entry'
- aarch64: tb_ret_addr
- arm: tb_ret_addr
- i386: tb_ret_addr, guest_base_flags
- ia64: tb_ret_addr
- mips: tb_ret_addr, bswap32_addr, bswap32u_addr, bswap64_addr

Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2017-10-24 13:53:42 -07:00
..
aarch64 linux-user: AArch64 has sync_file_range, not sync_file_range2 2016-07-19 16:18:11 +03:00
alpha linux-user: Handle ERFKILL and EHWPOISON 2017-01-22 18:14:10 -08:00
arm linux-user: Tidy and enforce reserved_va initialization 2017-10-16 16:00:56 +03:00
cris linux-user: Clean up target_structs.h header guards 2016-07-12 16:19:16 +02:00
host Replace 'struct ucontext' with 'ucontext_t' type 2017-07-20 10:10:28 +01:00
hppa linux-user: define correct UTS machine name for hppa 2017-02-06 18:24:40 -08:00
i386 linux-user: fix TARGET_NR_select 2016-09-22 07:24:21 +03:00
m68k linux-user: Update m68k syscall definitions to match Linux 4.6 2017-02-16 15:29:26 +01:00
microblaze linux-user: fix TARGET_NR_select 2016-09-22 07:24:21 +03:00
mips linux-user: Handle ERFKILL and EHWPOISON 2017-01-22 18:14:10 -08:00
mips64 linux-user: Handle ERFKILL and EHWPOISON 2017-01-22 18:14:10 -08:00
nios2 nios2: Add usermode binaries emulation 2017-01-24 13:10:35 -08:00
openrisc target/openrisc: implement shadow registers 2017-05-04 09:39:01 +09:00
ppc ppc: Fix signal delivery in ppc-user and ppc64-user 2016-09-23 10:29:40 +10:00
s390x linux-user: Clean up target_structs.h header guards 2016-07-12 16:19:16 +02:00
sh4 linux-user: Update sh4 syscall definitions to match Linux 4.8 2017-02-16 15:29:16 +01:00
sparc sparc: embed sparc_def_t into CPUSPARCState 2017-09-01 11:54:24 -03:00
sparc64 linux-user: sparc64: Use correct target SHMLBA in shmat() 2016-10-21 15:19:40 +03:00
tilegx linux-user: fix TARGET_NR_select 2016-09-22 07:24:21 +03:00
unicore32 linux-user: Clean up target_structs.h header guards 2016-07-12 16:19:16 +02:00
x86_64 linux-user: Fix target_semid_ds structure definition 2016-08-04 16:36:53 +03:00
elfload.c linux-user: Allow -R values up to 0xffff0000 for 32-bit ARM guests 2017-10-16 16:00:56 +03:00
errno_defs.h linux-user: Handle ERFKILL and EHWPOISON 2017-01-22 18:14:10 -08:00
flat.h
flatload.c linux-user: Fix error handling in flatload.c target_pread() 2016-09-21 14:27:19 +03:00
ioctls.h linux-user: Add some random ioctls 2017-10-16 21:00:04 +03:00
linux_loop.h linux-user: Add loop control ioctls 2016-07-19 15:22:33 +03:00
linuxload.c
m68k-sim.c
main.c tcg: introduce regions to split code_gen_buffer 2017-10-24 13:53:42 -07:00
Makefile.objs linux-user: Provide safe_syscall for fixing races between signals and syscalls 2016-05-27 14:49:51 +03:00
mmap.c linux-user: fix tcg/mmap test 2017-02-16 15:29:30 +01:00
qemu.h linux-user: Support stack-grows-up in elfload.c 2017-01-22 18:14:10 -08:00
safe-syscall.S linux-user: Provide safe_syscall for fixing races between signals and syscalls 2016-05-27 14:49:51 +03:00
signal.c target/m68k,linux-user: manage FP registers in ucontext 2017-10-16 16:00:56 +03:00
socket.h linux-user: Add HPPA socket.h definitions 2017-01-23 09:52:39 -08:00
strace.c linux-user: fix O_TMPFILE handling 2017-10-16 16:00:56 +03:00
strace.list linux-user: add rt_tgsigqueueinfo() strace 2017-05-29 14:56:08 +03:00
syscall_defs.h Linux-user updates for Qemu 2.11 2017-10-19 14:39:30 +01:00
syscall_types.h linux-user: Add FICLONE and FICLONERANGE ioctls 2017-02-16 15:29:30 +01:00
syscall.c tcg: enable multiple TCG contexts in softmmu 2017-10-24 13:53:42 -07:00
target_flat.h
trace-events trace-events: fix code style: print 0x before hex numbers 2017-08-01 12:13:07 +01:00
uaccess.c util: move declarations out of qemu-common.h 2016-03-22 22:20:17 +01:00
uname.c
uname.h Clean up decorations and whitespace around header guards 2016-07-12 16:20:46 +02:00
vm86.c