9122bea986
In case the STE's config is "Bypass" we currently don't set the
IOMMUTLBEntry perm flags and the access does not succeed. Also
if the config is 0b0xx (Aborted/Reserved), decode_ste and
smmuv3_decode_config currently returns -EINVAL and we don't enter
the expected code path: we record an event whereas we should not.
This patch fixes those bugs and simplifies the error handling.
decode_ste and smmuv3_decode_config now return 0 if aborted or
bypassed config was found. Only bad config info produces negative
error values. In smmuv3_translate we more clearly differentiate
errors, bypass/smmu disabled, aborted and success cases. Also
trace points are differentiated.
Fixes: 9bde7f0674 ("hw/arm/smmuv3: Implement translate callback")
Reported-by: jia.he@hxt-semitech.com
Signed-off-by: jia.he@hxt-semitech.com
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1529653501-15358-2-git-send-email-eric.auger@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
43 lines
4.4 KiB
Plaintext
43 lines
4.4 KiB
Plaintext
# See docs/devel/tracing.txt for syntax documentation.
|
|
|
|
# hw/arm/virt-acpi-build.c
|
|
virt_acpi_setup(void) "No fw cfg or ACPI disabled. Bailing out."
|
|
|
|
# hw/arm/smmu-common.c
|
|
smmu_add_mr(const char *name) "%s"
|
|
smmu_page_walk(int stage, uint64_t baseaddr, int first_level, uint64_t start, uint64_t end) "stage=%d, baseaddr=0x%"PRIx64", first level=%d, start=0x%"PRIx64", end=0x%"PRIx64
|
|
smmu_lookup_table(int level, uint64_t baseaddr, int granule_sz, uint64_t start, uint64_t end, int flags, uint64_t subpage_size) "level=%d baseaddr=0x%"PRIx64" granule=%d, start=0x%"PRIx64" end=0x%"PRIx64" flags=%d subpage_size=0x%"PRIx64
|
|
smmu_ptw_level(int level, uint64_t iova, size_t subpage_size, uint64_t baseaddr, uint32_t offset, uint64_t pte) "level=%d iova=0x%"PRIx64" subpage_sz=0x%zx baseaddr=0x%"PRIx64" offset=%d => pte=0x%"PRIx64
|
|
smmu_ptw_invalid_pte(int stage, int level, uint64_t baseaddr, uint64_t pteaddr, uint32_t offset, uint64_t pte) "stage=%d level=%d base@=0x%"PRIx64" pte@=0x%"PRIx64" offset=%d pte=0x%"PRIx64
|
|
smmu_ptw_page_pte(int stage, int level, uint64_t iova, uint64_t baseaddr, uint64_t pteaddr, uint64_t pte, uint64_t address) "stage=%d level=%d iova=0x%"PRIx64" base@=0x%"PRIx64" pte@=0x%"PRIx64" pte=0x%"PRIx64" page address = 0x%"PRIx64
|
|
smmu_ptw_block_pte(int stage, int level, uint64_t baseaddr, uint64_t pteaddr, uint64_t pte, uint64_t iova, uint64_t gpa, int bsize_mb) "stage=%d level=%d base@=0x%"PRIx64" pte@=0x%"PRIx64" pte=0x%"PRIx64" iova=0x%"PRIx64" block address = 0x%"PRIx64" block size = %d MiB"
|
|
smmu_get_pte(uint64_t baseaddr, int index, uint64_t pteaddr, uint64_t pte) "baseaddr=0x%"PRIx64" index=0x%x, pteaddr=0x%"PRIx64", pte=0x%"PRIx64
|
|
|
|
#hw/arm/smmuv3.c
|
|
smmuv3_read_mmio(uint64_t addr, uint64_t val, unsigned size, uint32_t r) "addr: 0x%"PRIx64" val:0x%"PRIx64" size: 0x%x(%d)"
|
|
smmuv3_trigger_irq(int irq) "irq=%d"
|
|
smmuv3_write_gerror(uint32_t toggled, uint32_t gerror) "toggled=0x%x, new GERROR=0x%x"
|
|
smmuv3_write_gerrorn(uint32_t acked, uint32_t gerrorn) "acked=0x%x, new GERRORN=0x%x"
|
|
smmuv3_unhandled_cmd(uint32_t type) "Unhandled command type=%d"
|
|
smmuv3_cmdq_consume(uint32_t prod, uint32_t cons, uint8_t prod_wrap, uint8_t cons_wrap) "prod=%d cons=%d prod.wrap=%d cons.wrap=%d"
|
|
smmuv3_cmdq_opcode(const char *opcode) "<--- %s"
|
|
smmuv3_cmdq_consume_out(uint32_t prod, uint32_t cons, uint8_t prod_wrap, uint8_t cons_wrap) "prod:%d, cons:%d, prod_wrap:%d, cons_wrap:%d "
|
|
smmuv3_cmdq_consume_error(const char *cmd_name, uint8_t cmd_error) "Error on %s command execution: %d"
|
|
smmuv3_update(bool is_empty, uint32_t prod, uint32_t cons, uint8_t prod_wrap, uint8_t cons_wrap) "q empty:%d prod:%d cons:%d p.wrap:%d p.cons:%d"
|
|
smmuv3_update_check_cmd(int error) "cmdq not enabled or error :0x%x"
|
|
smmuv3_write_mmio(uint64_t addr, uint64_t val, unsigned size, uint32_t r) "addr: 0x%"PRIx64" val:0x%"PRIx64" size: 0x%x(%d)"
|
|
smmuv3_write_mmio_idr(uint64_t addr, uint64_t val) "write to RO/Unimpl reg 0x%"PRIx64" val64:0x%"PRIx64
|
|
smmuv3_write_mmio_evtq_cons_bef_clear(uint32_t prod, uint32_t cons, uint8_t prod_wrap, uint8_t cons_wrap) "Before clearing interrupt prod:0x%x cons:0x%x prod.w:%d cons.w:%d"
|
|
smmuv3_write_mmio_evtq_cons_after_clear(uint32_t prod, uint32_t cons, uint8_t prod_wrap, uint8_t cons_wrap) "after clearing interrupt prod:0x%x cons:0x%x prod.w:%d cons.w:%d"
|
|
smmuv3_record_event(const char *type, uint32_t sid) "%s sid=%d"
|
|
smmuv3_find_ste(uint16_t sid, uint32_t features, uint16_t sid_split) "SID:0x%x features:0x%x, sid_split:0x%x"
|
|
smmuv3_find_ste_2lvl(uint64_t strtab_base, uint64_t l1ptr, int l1_ste_offset, uint64_t l2ptr, int l2_ste_offset, int max_l2_ste) "strtab_base:0x%"PRIx64" l1ptr:0x%"PRIx64" l1_off:0x%x, l2ptr:0x%"PRIx64" l2_off:0x%x max_l2_ste:%d"
|
|
smmuv3_get_ste(uint64_t addr) "STE addr: 0x%"PRIx64
|
|
smmuv3_translate_disable(const char *n, uint16_t sid, uint64_t addr, bool is_write) "%s sid=%d bypass (smmu disabled) iova:0x%"PRIx64" is_write=%d"
|
|
smmuv3_translate_bypass(const char *n, uint16_t sid, uint64_t addr, bool is_write) "%s sid=%d STE bypass iova:0x%"PRIx64" is_write=%d"
|
|
smmuv3_translate_abort(const char *n, uint16_t sid, uint64_t addr, bool is_write) "%s sid=%d abort on iova:0x%"PRIx64" is_write=%d"
|
|
smmuv3_translate_success(const char *n, uint16_t sid, uint64_t iova, uint64_t translated, int perm) "%s sid=%d iova=0x%"PRIx64" translated=0x%"PRIx64" perm=0x%x"
|
|
smmuv3_get_cd(uint64_t addr) "CD addr: 0x%"PRIx64
|
|
smmuv3_decode_cd(uint32_t oas) "oas=%d"
|
|
smmuv3_decode_cd_tt(int i, uint32_t tsz, uint64_t ttb, uint32_t granule_sz) "TT[%d]:tsz:%d ttb:0x%"PRIx64" granule_sz:%d"
|