3dc6f86936
Convert all uses of error_report("warning:"... to use warn_report() instead. This helps standardise on a single method of printing warnings to the user. All of the warnings were changed using these two commands: find ./* -type f -exec sed -i \ 's|error_report(".*warning[,:] |warn_report("|Ig' {} + Indentation fixed up manually afterwards. The test-qdev-global-props test case was manually updated to ensure that this patch passes make check (as the test cases are case sensitive). Signed-off-by: Alistair Francis <alistair.francis@xilinx.com> Suggested-by: Thomas Huth <thuth@redhat.com> Cc: Jeff Cody <jcody@redhat.com> Cc: Kevin Wolf <kwolf@redhat.com> Cc: Max Reitz <mreitz@redhat.com> Cc: Ronnie Sahlberg <ronniesahlberg@gmail.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Peter Lieven <pl@kamp.de> Cc: Josh Durgin <jdurgin@redhat.com> Cc: "Richard W.M. Jones" <rjones@redhat.com> Cc: Markus Armbruster <armbru@redhat.com> Cc: Peter Crosthwaite <crosthwaite.peter@gmail.com> Cc: Richard Henderson <rth@twiddle.net> Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com> Cc: Greg Kurz <groug@kaod.org> Cc: Rob Herring <robh@kernel.org> Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Peter Chubb <peter.chubb@nicta.com.au> Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Marcel Apfelbaum <marcel@redhat.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Igor Mammedov <imammedo@redhat.com> Cc: David Gibson <david@gibson.dropbear.id.au> Cc: Alexander Graf <agraf@suse.de> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Cornelia Huck <cohuck@redhat.com> Cc: Stefan Hajnoczi <stefanha@redhat.com> Acked-by: David Gibson <david@gibson.dropbear.id.au> Acked-by: Greg Kurz <groug@kaod.org> Acked-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed by: Peter Chubb <peter.chubb@data61.csiro.au> Acked-by: Max Reitz <mreitz@redhat.com> Acked-by: Marcel Apfelbaum <marcel@redhat.com> Message-Id: <e1cfa2cd47087c248dd24caca9c33d9af0c499b0.1499866456.git.alistair.francis@xilinx.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
1884 lines
62 KiB
C
1884 lines
62 KiB
C
/*
|
|
* Copyright (c) 2007, Neocleus Corporation.
|
|
*
|
|
* This work is licensed under the terms of the GNU GPL, version 2. See
|
|
* the COPYING file in the top-level directory.
|
|
*
|
|
*
|
|
* Assign a PCI device from the host to a guest VM.
|
|
*
|
|
* This implementation uses the classic device assignment interface of KVM
|
|
* and is only available on x86 hosts. It is expected to be obsoleted by VFIO
|
|
* based device assignment.
|
|
*
|
|
* Adapted for KVM (qemu-kvm) by Qumranet. QEMU version was based on qemu-kvm
|
|
* revision 4144fe9d48. See its repository for the history.
|
|
*
|
|
* Copyright (c) 2007, Neocleus, Alex Novik (alex@neocleus.com)
|
|
* Copyright (c) 2007, Neocleus, Guy Zana (guy@neocleus.com)
|
|
* Copyright (C) 2008, Qumranet, Amit Shah (amit.shah@qumranet.com)
|
|
* Copyright (C) 2008, Red Hat, Amit Shah (amit.shah@redhat.com)
|
|
* Copyright (C) 2008, IBM, Muli Ben-Yehuda (muli@il.ibm.com)
|
|
*/
|
|
|
|
#include "qemu/osdep.h"
|
|
#include <linux/kvm.h>
|
|
#include "qapi/error.h"
|
|
#include "hw/hw.h"
|
|
#include "hw/i386/pc.h"
|
|
#include "qemu/error-report.h"
|
|
#include "ui/console.h"
|
|
#include "hw/loader.h"
|
|
#include "monitor/monitor.h"
|
|
#include "qemu/range.h"
|
|
#include "sysemu/sysemu.h"
|
|
#include "hw/pci/pci.h"
|
|
#include "hw/pci/msi.h"
|
|
#include "kvm_i386.h"
|
|
#include "hw/pci/pci-assign.h"
|
|
|
|
/* From linux/ioport.h */
|
|
#define IORESOURCE_IO 0x00000100 /* Resource type */
|
|
#define IORESOURCE_MEM 0x00000200
|
|
#define IORESOURCE_IRQ 0x00000400
|
|
#define IORESOURCE_DMA 0x00000800
|
|
#define IORESOURCE_PREFETCH 0x00002000 /* No side effects */
|
|
#define IORESOURCE_MEM_64 0x00100000
|
|
|
|
typedef struct PCIRegion {
|
|
int type; /* Memory or port I/O */
|
|
int valid;
|
|
uint64_t base_addr;
|
|
uint64_t size; /* size of the region */
|
|
int resource_fd;
|
|
} PCIRegion;
|
|
|
|
typedef struct PCIDevRegions {
|
|
uint8_t bus, dev, func; /* Bus inside domain, device and function */
|
|
int irq; /* IRQ number */
|
|
uint16_t region_number; /* number of active regions */
|
|
|
|
/* Port I/O or MMIO Regions */
|
|
PCIRegion regions[PCI_NUM_REGIONS - 1];
|
|
int config_fd;
|
|
} PCIDevRegions;
|
|
|
|
typedef struct AssignedDevRegion {
|
|
MemoryRegion container;
|
|
MemoryRegion real_iomem;
|
|
union {
|
|
uint8_t *r_virtbase; /* mmapped access address for memory regions */
|
|
uint32_t r_baseport; /* the base guest port for I/O regions */
|
|
} u;
|
|
pcibus_t e_size; /* emulated size of region in bytes */
|
|
pcibus_t r_size; /* real size of region in bytes */
|
|
PCIRegion *region;
|
|
} AssignedDevRegion;
|
|
|
|
#define ASSIGNED_DEVICE_PREFER_MSI_BIT 0
|
|
#define ASSIGNED_DEVICE_SHARE_INTX_BIT 1
|
|
|
|
#define ASSIGNED_DEVICE_PREFER_MSI_MASK (1 << ASSIGNED_DEVICE_PREFER_MSI_BIT)
|
|
#define ASSIGNED_DEVICE_SHARE_INTX_MASK (1 << ASSIGNED_DEVICE_SHARE_INTX_BIT)
|
|
|
|
typedef struct MSIXTableEntry {
|
|
uint32_t addr_lo;
|
|
uint32_t addr_hi;
|
|
uint32_t data;
|
|
uint32_t ctrl;
|
|
} MSIXTableEntry;
|
|
|
|
typedef enum AssignedIRQType {
|
|
ASSIGNED_IRQ_NONE = 0,
|
|
ASSIGNED_IRQ_INTX_HOST_INTX,
|
|
ASSIGNED_IRQ_INTX_HOST_MSI,
|
|
ASSIGNED_IRQ_MSI,
|
|
ASSIGNED_IRQ_MSIX
|
|
} AssignedIRQType;
|
|
|
|
typedef struct AssignedDevice {
|
|
PCIDevice dev;
|
|
PCIHostDeviceAddress host;
|
|
uint32_t dev_id;
|
|
uint32_t features;
|
|
int intpin;
|
|
AssignedDevRegion v_addrs[PCI_NUM_REGIONS - 1];
|
|
PCIDevRegions real_device;
|
|
PCIINTxRoute intx_route;
|
|
AssignedIRQType assigned_irq_type;
|
|
struct {
|
|
#define ASSIGNED_DEVICE_CAP_MSI (1 << 0)
|
|
#define ASSIGNED_DEVICE_CAP_MSIX (1 << 1)
|
|
uint32_t available;
|
|
#define ASSIGNED_DEVICE_MSI_ENABLED (1 << 0)
|
|
#define ASSIGNED_DEVICE_MSIX_ENABLED (1 << 1)
|
|
#define ASSIGNED_DEVICE_MSIX_MASKED (1 << 2)
|
|
uint32_t state;
|
|
} cap;
|
|
uint8_t emulate_config_read[PCI_CONFIG_SPACE_SIZE];
|
|
uint8_t emulate_config_write[PCI_CONFIG_SPACE_SIZE];
|
|
int msi_virq_nr;
|
|
int *msi_virq;
|
|
MSIXTableEntry *msix_table;
|
|
hwaddr msix_table_addr;
|
|
uint16_t msix_table_size;
|
|
uint16_t msix_max;
|
|
MemoryRegion mmio;
|
|
char *configfd_name;
|
|
int32_t bootindex;
|
|
} AssignedDevice;
|
|
|
|
#define TYPE_PCI_ASSIGN "kvm-pci-assign"
|
|
#define PCI_ASSIGN(obj) OBJECT_CHECK(AssignedDevice, (obj), TYPE_PCI_ASSIGN)
|
|
|
|
static void assigned_dev_update_irq_routing(PCIDevice *dev);
|
|
|
|
static void assigned_dev_load_option_rom(AssignedDevice *dev);
|
|
|
|
static void assigned_dev_unregister_msix_mmio(AssignedDevice *dev);
|
|
|
|
static uint64_t assigned_dev_ioport_rw(AssignedDevRegion *dev_region,
|
|
hwaddr addr, int size,
|
|
uint64_t *data)
|
|
{
|
|
uint64_t val = 0;
|
|
int fd = dev_region->region->resource_fd;
|
|
|
|
if (data) {
|
|
DEBUG("pwrite data=%" PRIx64 ", size=%d, e_phys=" TARGET_FMT_plx
|
|
", addr="TARGET_FMT_plx"\n", *data, size, addr, addr);
|
|
if (pwrite(fd, data, size, addr) != size) {
|
|
error_report("%s - pwrite failed %s", __func__, strerror(errno));
|
|
}
|
|
} else {
|
|
if (pread(fd, &val, size, addr) != size) {
|
|
error_report("%s - pread failed %s", __func__, strerror(errno));
|
|
val = (1UL << (size * 8)) - 1;
|
|
}
|
|
DEBUG("pread val=%" PRIx64 ", size=%d, e_phys=" TARGET_FMT_plx
|
|
", addr=" TARGET_FMT_plx "\n", val, size, addr, addr);
|
|
}
|
|
return val;
|
|
}
|
|
|
|
static void assigned_dev_ioport_write(void *opaque, hwaddr addr,
|
|
uint64_t data, unsigned size)
|
|
{
|
|
assigned_dev_ioport_rw(opaque, addr, size, &data);
|
|
}
|
|
|
|
static uint64_t assigned_dev_ioport_read(void *opaque,
|
|
hwaddr addr, unsigned size)
|
|
{
|
|
return assigned_dev_ioport_rw(opaque, addr, size, NULL);
|
|
}
|
|
|
|
static uint32_t slow_bar_readb(void *opaque, hwaddr addr)
|
|
{
|
|
AssignedDevRegion *d = opaque;
|
|
uint8_t *in = d->u.r_virtbase + addr;
|
|
uint32_t r;
|
|
|
|
r = *in;
|
|
DEBUG("addr=0x" TARGET_FMT_plx " val=0x%08x\n", addr, r);
|
|
|
|
return r;
|
|
}
|
|
|
|
static uint32_t slow_bar_readw(void *opaque, hwaddr addr)
|
|
{
|
|
AssignedDevRegion *d = opaque;
|
|
uint16_t *in = (uint16_t *)(d->u.r_virtbase + addr);
|
|
uint32_t r;
|
|
|
|
r = *in;
|
|
DEBUG("addr=0x" TARGET_FMT_plx " val=0x%08x\n", addr, r);
|
|
|
|
return r;
|
|
}
|
|
|
|
static uint32_t slow_bar_readl(void *opaque, hwaddr addr)
|
|
{
|
|
AssignedDevRegion *d = opaque;
|
|
uint32_t *in = (uint32_t *)(d->u.r_virtbase + addr);
|
|
uint32_t r;
|
|
|
|
r = *in;
|
|
DEBUG("addr=0x" TARGET_FMT_plx " val=0x%08x\n", addr, r);
|
|
|
|
return r;
|
|
}
|
|
|
|
static void slow_bar_writeb(void *opaque, hwaddr addr, uint32_t val)
|
|
{
|
|
AssignedDevRegion *d = opaque;
|
|
uint8_t *out = d->u.r_virtbase + addr;
|
|
|
|
DEBUG("addr=0x" TARGET_FMT_plx " val=0x%02x\n", addr, val);
|
|
*out = val;
|
|
}
|
|
|
|
static void slow_bar_writew(void *opaque, hwaddr addr, uint32_t val)
|
|
{
|
|
AssignedDevRegion *d = opaque;
|
|
uint16_t *out = (uint16_t *)(d->u.r_virtbase + addr);
|
|
|
|
DEBUG("addr=0x" TARGET_FMT_plx " val=0x%04x\n", addr, val);
|
|
*out = val;
|
|
}
|
|
|
|
static void slow_bar_writel(void *opaque, hwaddr addr, uint32_t val)
|
|
{
|
|
AssignedDevRegion *d = opaque;
|
|
uint32_t *out = (uint32_t *)(d->u.r_virtbase + addr);
|
|
|
|
DEBUG("addr=0x" TARGET_FMT_plx " val=0x%08x\n", addr, val);
|
|
*out = val;
|
|
}
|
|
|
|
static const MemoryRegionOps slow_bar_ops = {
|
|
.old_mmio = {
|
|
.read = { slow_bar_readb, slow_bar_readw, slow_bar_readl, },
|
|
.write = { slow_bar_writeb, slow_bar_writew, slow_bar_writel, },
|
|
},
|
|
.endianness = DEVICE_NATIVE_ENDIAN,
|
|
};
|
|
|
|
static void assigned_dev_iomem_setup(PCIDevice *pci_dev, int region_num,
|
|
pcibus_t e_size)
|
|
{
|
|
AssignedDevice *r_dev = PCI_ASSIGN(pci_dev);
|
|
AssignedDevRegion *region = &r_dev->v_addrs[region_num];
|
|
PCIRegion *real_region = &r_dev->real_device.regions[region_num];
|
|
|
|
if (e_size > 0) {
|
|
memory_region_init(®ion->container, OBJECT(pci_dev),
|
|
"assigned-dev-container", e_size);
|
|
memory_region_add_subregion(®ion->container, 0, ®ion->real_iomem);
|
|
|
|
/* deal with MSI-X MMIO page */
|
|
if (real_region->base_addr <= r_dev->msix_table_addr &&
|
|
real_region->base_addr + real_region->size >
|
|
r_dev->msix_table_addr) {
|
|
uint64_t offset = r_dev->msix_table_addr - real_region->base_addr;
|
|
|
|
memory_region_add_subregion_overlap(®ion->container,
|
|
offset,
|
|
&r_dev->mmio,
|
|
1);
|
|
}
|
|
}
|
|
}
|
|
|
|
static const MemoryRegionOps assigned_dev_ioport_ops = {
|
|
.read = assigned_dev_ioport_read,
|
|
.write = assigned_dev_ioport_write,
|
|
.endianness = DEVICE_NATIVE_ENDIAN,
|
|
};
|
|
|
|
static void assigned_dev_ioport_setup(PCIDevice *pci_dev, int region_num,
|
|
pcibus_t size)
|
|
{
|
|
AssignedDevice *r_dev = PCI_ASSIGN(pci_dev);
|
|
AssignedDevRegion *region = &r_dev->v_addrs[region_num];
|
|
|
|
region->e_size = size;
|
|
memory_region_init(®ion->container, OBJECT(pci_dev),
|
|
"assigned-dev-container", size);
|
|
memory_region_init_io(®ion->real_iomem, OBJECT(pci_dev),
|
|
&assigned_dev_ioport_ops, r_dev->v_addrs + region_num,
|
|
"assigned-dev-iomem", size);
|
|
memory_region_add_subregion(®ion->container, 0, ®ion->real_iomem);
|
|
}
|
|
|
|
static uint32_t assigned_dev_pci_read(PCIDevice *d, int pos, int len)
|
|
{
|
|
AssignedDevice *pci_dev = PCI_ASSIGN(d);
|
|
uint32_t val;
|
|
ssize_t ret;
|
|
int fd = pci_dev->real_device.config_fd;
|
|
|
|
again:
|
|
ret = pread(fd, &val, len, pos);
|
|
if (ret != len) {
|
|
if ((ret < 0) && (errno == EINTR || errno == EAGAIN)) {
|
|
goto again;
|
|
}
|
|
|
|
hw_error("pci read failed, ret = %zd errno = %d\n", ret, errno);
|
|
}
|
|
|
|
return val;
|
|
}
|
|
|
|
static uint8_t assigned_dev_pci_read_byte(PCIDevice *d, int pos)
|
|
{
|
|
return (uint8_t)assigned_dev_pci_read(d, pos, 1);
|
|
}
|
|
|
|
static void assigned_dev_pci_write(PCIDevice *d, int pos, uint32_t val, int len)
|
|
{
|
|
AssignedDevice *pci_dev = PCI_ASSIGN(d);
|
|
ssize_t ret;
|
|
int fd = pci_dev->real_device.config_fd;
|
|
|
|
again:
|
|
ret = pwrite(fd, &val, len, pos);
|
|
if (ret != len) {
|
|
if ((ret < 0) && (errno == EINTR || errno == EAGAIN)) {
|
|
goto again;
|
|
}
|
|
|
|
hw_error("pci write failed, ret = %zd errno = %d\n", ret, errno);
|
|
}
|
|
}
|
|
|
|
static void assigned_dev_emulate_config_read(AssignedDevice *dev,
|
|
uint32_t offset, uint32_t len)
|
|
{
|
|
memset(dev->emulate_config_read + offset, 0xff, len);
|
|
}
|
|
|
|
static void assigned_dev_direct_config_read(AssignedDevice *dev,
|
|
uint32_t offset, uint32_t len)
|
|
{
|
|
memset(dev->emulate_config_read + offset, 0, len);
|
|
}
|
|
|
|
static void assigned_dev_direct_config_write(AssignedDevice *dev,
|
|
uint32_t offset, uint32_t len)
|
|
{
|
|
memset(dev->emulate_config_write + offset, 0, len);
|
|
}
|
|
|
|
static uint8_t pci_find_cap_offset(PCIDevice *d, uint8_t cap, uint8_t start)
|
|
{
|
|
int id;
|
|
int max_cap = 48;
|
|
int pos = start ? start : PCI_CAPABILITY_LIST;
|
|
int status;
|
|
|
|
status = assigned_dev_pci_read_byte(d, PCI_STATUS);
|
|
if ((status & PCI_STATUS_CAP_LIST) == 0) {
|
|
return 0;
|
|
}
|
|
|
|
while (max_cap--) {
|
|
pos = assigned_dev_pci_read_byte(d, pos);
|
|
if (pos < 0x40) {
|
|
break;
|
|
}
|
|
|
|
pos &= ~3;
|
|
id = assigned_dev_pci_read_byte(d, pos + PCI_CAP_LIST_ID);
|
|
|
|
if (id == 0xff) {
|
|
break;
|
|
}
|
|
if (id == cap) {
|
|
return pos;
|
|
}
|
|
|
|
pos += PCI_CAP_LIST_NEXT;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static void assigned_dev_register_regions(PCIRegion *io_regions,
|
|
unsigned long regions_num,
|
|
AssignedDevice *pci_dev,
|
|
Error **errp)
|
|
{
|
|
uint32_t i;
|
|
PCIRegion *cur_region = io_regions;
|
|
|
|
for (i = 0; i < regions_num; i++, cur_region++) {
|
|
if (!cur_region->valid) {
|
|
continue;
|
|
}
|
|
|
|
/* handle memory io regions */
|
|
if (cur_region->type & IORESOURCE_MEM) {
|
|
int t = PCI_BASE_ADDRESS_SPACE_MEMORY;
|
|
if (cur_region->type & IORESOURCE_PREFETCH) {
|
|
t |= PCI_BASE_ADDRESS_MEM_PREFETCH;
|
|
}
|
|
if (cur_region->type & IORESOURCE_MEM_64) {
|
|
t |= PCI_BASE_ADDRESS_MEM_TYPE_64;
|
|
}
|
|
|
|
/* map physical memory */
|
|
pci_dev->v_addrs[i].u.r_virtbase = mmap(NULL, cur_region->size,
|
|
PROT_WRITE | PROT_READ,
|
|
MAP_SHARED,
|
|
cur_region->resource_fd,
|
|
(off_t)0);
|
|
|
|
if (pci_dev->v_addrs[i].u.r_virtbase == MAP_FAILED) {
|
|
pci_dev->v_addrs[i].u.r_virtbase = NULL;
|
|
error_setg_errno(errp, errno, "Couldn't mmap 0x%" PRIx64 "!",
|
|
cur_region->base_addr);
|
|
return;
|
|
}
|
|
|
|
pci_dev->v_addrs[i].r_size = cur_region->size;
|
|
pci_dev->v_addrs[i].e_size = 0;
|
|
|
|
/* add offset */
|
|
pci_dev->v_addrs[i].u.r_virtbase +=
|
|
(cur_region->base_addr & 0xFFF);
|
|
|
|
if (cur_region->size & 0xFFF) {
|
|
error_report("PCI region %d at address 0x%" PRIx64 " has "
|
|
"size 0x%" PRIx64 ", which is not a multiple of "
|
|
"4K. You might experience some performance hit "
|
|
"due to that.",
|
|
i, cur_region->base_addr, cur_region->size);
|
|
memory_region_init_io(&pci_dev->v_addrs[i].real_iomem,
|
|
OBJECT(pci_dev), &slow_bar_ops,
|
|
&pci_dev->v_addrs[i],
|
|
"assigned-dev-slow-bar",
|
|
cur_region->size);
|
|
} else {
|
|
void *virtbase = pci_dev->v_addrs[i].u.r_virtbase;
|
|
char name[32];
|
|
snprintf(name, sizeof(name), "%s.bar%d",
|
|
object_get_typename(OBJECT(pci_dev)), i);
|
|
memory_region_init_ram_ptr(&pci_dev->v_addrs[i].real_iomem,
|
|
OBJECT(pci_dev), name,
|
|
cur_region->size, virtbase);
|
|
vmstate_register_ram(&pci_dev->v_addrs[i].real_iomem,
|
|
&pci_dev->dev.qdev);
|
|
}
|
|
|
|
assigned_dev_iomem_setup(&pci_dev->dev, i, cur_region->size);
|
|
pci_register_bar((PCIDevice *) pci_dev, i, t,
|
|
&pci_dev->v_addrs[i].container);
|
|
continue;
|
|
} else {
|
|
/* handle port io regions */
|
|
uint32_t val;
|
|
int ret;
|
|
|
|
/* Test kernel support for ioport resource read/write. Old
|
|
* kernels return EIO. New kernels only allow 1/2/4 byte reads
|
|
* so should return EINVAL for a 3 byte read */
|
|
ret = pread(pci_dev->v_addrs[i].region->resource_fd, &val, 3, 0);
|
|
if (ret >= 0) {
|
|
error_report("Unexpected return from I/O port read: %d", ret);
|
|
abort();
|
|
} else if (errno != EINVAL) {
|
|
error_report("Kernel doesn't support ioport resource "
|
|
"access, hiding this region.");
|
|
close(pci_dev->v_addrs[i].region->resource_fd);
|
|
cur_region->valid = 0;
|
|
continue;
|
|
}
|
|
|
|
pci_dev->v_addrs[i].u.r_baseport = cur_region->base_addr;
|
|
pci_dev->v_addrs[i].r_size = cur_region->size;
|
|
pci_dev->v_addrs[i].e_size = 0;
|
|
|
|
assigned_dev_ioport_setup(&pci_dev->dev, i, cur_region->size);
|
|
pci_register_bar((PCIDevice *) pci_dev, i,
|
|
PCI_BASE_ADDRESS_SPACE_IO,
|
|
&pci_dev->v_addrs[i].container);
|
|
}
|
|
}
|
|
|
|
/* success */
|
|
}
|
|
|
|
static void get_real_id(const char *devpath, const char *idname, uint16_t *val,
|
|
Error **errp)
|
|
{
|
|
FILE *f;
|
|
char name[128];
|
|
long id;
|
|
|
|
snprintf(name, sizeof(name), "%s%s", devpath, idname);
|
|
f = fopen(name, "r");
|
|
if (f == NULL) {
|
|
error_setg_file_open(errp, errno, name);
|
|
return;
|
|
}
|
|
if (fscanf(f, "%li\n", &id) == 1) {
|
|
*val = id;
|
|
} else {
|
|
error_setg(errp, "Failed to parse contents of '%s'", name);
|
|
}
|
|
fclose(f);
|
|
}
|
|
|
|
static void get_real_vendor_id(const char *devpath, uint16_t *val,
|
|
Error **errp)
|
|
{
|
|
get_real_id(devpath, "vendor", val, errp);
|
|
}
|
|
|
|
static void get_real_device_id(const char *devpath, uint16_t *val,
|
|
Error **errp)
|
|
{
|
|
get_real_id(devpath, "device", val, errp);
|
|
}
|
|
|
|
static void get_real_device(AssignedDevice *pci_dev, Error **errp)
|
|
{
|
|
char dir[128], name[128];
|
|
int fd, r = 0;
|
|
FILE *f;
|
|
uint64_t start, end, size, flags;
|
|
uint16_t id;
|
|
PCIRegion *rp;
|
|
PCIDevRegions *dev = &pci_dev->real_device;
|
|
Error *local_err = NULL;
|
|
|
|
dev->region_number = 0;
|
|
|
|
snprintf(dir, sizeof(dir), "/sys/bus/pci/devices/%04x:%02x:%02x.%x/",
|
|
pci_dev->host.domain, pci_dev->host.bus,
|
|
pci_dev->host.slot, pci_dev->host.function);
|
|
|
|
snprintf(name, sizeof(name), "%sconfig", dir);
|
|
|
|
if (pci_dev->configfd_name && *pci_dev->configfd_name) {
|
|
dev->config_fd = monitor_fd_param(cur_mon, pci_dev->configfd_name,
|
|
&local_err);
|
|
if (local_err) {
|
|
error_propagate(errp, local_err);
|
|
return;
|
|
}
|
|
} else {
|
|
dev->config_fd = open(name, O_RDWR);
|
|
|
|
if (dev->config_fd == -1) {
|
|
error_setg_file_open(errp, errno, name);
|
|
return;
|
|
}
|
|
}
|
|
again:
|
|
r = read(dev->config_fd, pci_dev->dev.config,
|
|
pci_config_size(&pci_dev->dev));
|
|
if (r < 0) {
|
|
if (errno == EINTR || errno == EAGAIN) {
|
|
goto again;
|
|
}
|
|
error_setg_errno(errp, errno, "read(\"%s\")",
|
|
(pci_dev->configfd_name && *pci_dev->configfd_name) ?
|
|
pci_dev->configfd_name : name);
|
|
return;
|
|
}
|
|
|
|
/* Restore or clear multifunction, this is always controlled by qemu */
|
|
if (pci_dev->dev.cap_present & QEMU_PCI_CAP_MULTIFUNCTION) {
|
|
pci_dev->dev.config[PCI_HEADER_TYPE] |= PCI_HEADER_TYPE_MULTI_FUNCTION;
|
|
} else {
|
|
pci_dev->dev.config[PCI_HEADER_TYPE] &= ~PCI_HEADER_TYPE_MULTI_FUNCTION;
|
|
}
|
|
|
|
/* Clear host resource mapping info. If we choose not to register a
|
|
* BAR, such as might be the case with the option ROM, we can get
|
|
* confusing, unwritable, residual addresses from the host here. */
|
|
memset(&pci_dev->dev.config[PCI_BASE_ADDRESS_0], 0, 24);
|
|
memset(&pci_dev->dev.config[PCI_ROM_ADDRESS], 0, 4);
|
|
|
|
snprintf(name, sizeof(name), "%sresource", dir);
|
|
|
|
f = fopen(name, "r");
|
|
if (f == NULL) {
|
|
error_setg_file_open(errp, errno, name);
|
|
return;
|
|
}
|
|
|
|
for (r = 0; r < PCI_ROM_SLOT; r++) {
|
|
if (fscanf(f, "%" SCNi64 " %" SCNi64 " %" SCNi64 "\n",
|
|
&start, &end, &flags) != 3) {
|
|
break;
|
|
}
|
|
|
|
rp = dev->regions + r;
|
|
rp->valid = 0;
|
|
rp->resource_fd = -1;
|
|
size = end - start + 1;
|
|
flags &= IORESOURCE_IO | IORESOURCE_MEM | IORESOURCE_PREFETCH
|
|
| IORESOURCE_MEM_64;
|
|
if (size == 0 || (flags & ~IORESOURCE_PREFETCH) == 0) {
|
|
continue;
|
|
}
|
|
if (flags & IORESOURCE_MEM) {
|
|
flags &= ~IORESOURCE_IO;
|
|
} else {
|
|
flags &= ~IORESOURCE_PREFETCH;
|
|
}
|
|
snprintf(name, sizeof(name), "%sresource%d", dir, r);
|
|
fd = open(name, O_RDWR);
|
|
if (fd == -1) {
|
|
continue;
|
|
}
|
|
rp->resource_fd = fd;
|
|
|
|
rp->type = flags;
|
|
rp->valid = 1;
|
|
rp->base_addr = start;
|
|
rp->size = size;
|
|
pci_dev->v_addrs[r].region = rp;
|
|
DEBUG("region %d size %" PRIu64 " start 0x%" PRIx64
|
|
" type %d resource_fd %d\n",
|
|
r, rp->size, start, rp->type, rp->resource_fd);
|
|
}
|
|
|
|
fclose(f);
|
|
|
|
/* read and fill vendor ID */
|
|
get_real_vendor_id(dir, &id, &local_err);
|
|
if (local_err) {
|
|
error_propagate(errp, local_err);
|
|
return;
|
|
}
|
|
pci_dev->dev.config[0] = id & 0xff;
|
|
pci_dev->dev.config[1] = (id & 0xff00) >> 8;
|
|
|
|
/* read and fill device ID */
|
|
get_real_device_id(dir, &id, &local_err);
|
|
if (local_err) {
|
|
error_propagate(errp, local_err);
|
|
return;
|
|
}
|
|
pci_dev->dev.config[2] = id & 0xff;
|
|
pci_dev->dev.config[3] = (id & 0xff00) >> 8;
|
|
|
|
pci_word_test_and_clear_mask(pci_dev->emulate_config_write + PCI_COMMAND,
|
|
PCI_COMMAND_MASTER | PCI_COMMAND_INTX_DISABLE);
|
|
|
|
dev->region_number = r;
|
|
}
|
|
|
|
static void free_msi_virqs(AssignedDevice *dev)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < dev->msi_virq_nr; i++) {
|
|
if (dev->msi_virq[i] >= 0) {
|
|
kvm_irqchip_release_virq(kvm_state, dev->msi_virq[i]);
|
|
dev->msi_virq[i] = -1;
|
|
}
|
|
}
|
|
g_free(dev->msi_virq);
|
|
dev->msi_virq = NULL;
|
|
dev->msi_virq_nr = 0;
|
|
}
|
|
|
|
static void free_assigned_device(AssignedDevice *dev)
|
|
{
|
|
int i;
|
|
|
|
if (dev->cap.available & ASSIGNED_DEVICE_CAP_MSIX) {
|
|
assigned_dev_unregister_msix_mmio(dev);
|
|
}
|
|
for (i = 0; i < dev->real_device.region_number; i++) {
|
|
PCIRegion *pci_region = &dev->real_device.regions[i];
|
|
AssignedDevRegion *region = &dev->v_addrs[i];
|
|
|
|
if (!pci_region->valid) {
|
|
continue;
|
|
}
|
|
if (pci_region->type & IORESOURCE_IO) {
|
|
if (region->u.r_baseport) {
|
|
memory_region_del_subregion(®ion->container,
|
|
®ion->real_iomem);
|
|
}
|
|
} else if (pci_region->type & IORESOURCE_MEM) {
|
|
if (region->u.r_virtbase) {
|
|
memory_region_del_subregion(®ion->container,
|
|
®ion->real_iomem);
|
|
|
|
/* Remove MSI-X table subregion */
|
|
if (pci_region->base_addr <= dev->msix_table_addr &&
|
|
pci_region->base_addr + pci_region->size >
|
|
dev->msix_table_addr) {
|
|
memory_region_del_subregion(®ion->container,
|
|
&dev->mmio);
|
|
}
|
|
if (munmap(region->u.r_virtbase,
|
|
(pci_region->size + 0xFFF) & 0xFFFFF000)) {
|
|
error_report("Failed to unmap assigned device region: %s",
|
|
strerror(errno));
|
|
}
|
|
}
|
|
}
|
|
if (pci_region->resource_fd >= 0) {
|
|
close(pci_region->resource_fd);
|
|
}
|
|
}
|
|
|
|
if (dev->real_device.config_fd >= 0) {
|
|
close(dev->real_device.config_fd);
|
|
}
|
|
|
|
free_msi_virqs(dev);
|
|
}
|
|
|
|
/* This function tries to determine the cause of the PCI assignment failure. It
|
|
* always returns the cause as a dynamically allocated, human readable string.
|
|
* If the function fails to determine the cause for any internal reason, then
|
|
* the returned string will state that fact.
|
|
*/
|
|
static char *assign_failed_examine(const AssignedDevice *dev)
|
|
{
|
|
char name[PATH_MAX], dir[PATH_MAX], driver[PATH_MAX] = {}, *ns;
|
|
uint16_t vendor_id, device_id;
|
|
int r;
|
|
Error *local_err = NULL;
|
|
|
|
snprintf(dir, sizeof(dir), "/sys/bus/pci/devices/%04x:%02x:%02x.%01x/",
|
|
dev->host.domain, dev->host.bus, dev->host.slot,
|
|
dev->host.function);
|
|
|
|
snprintf(name, sizeof(name), "%sdriver", dir);
|
|
|
|
r = readlink(name, driver, sizeof(driver));
|
|
if ((r <= 0) || r >= sizeof(driver)) {
|
|
goto fail;
|
|
}
|
|
|
|
driver[r] = 0;
|
|
ns = strrchr(driver, '/');
|
|
if (!ns) {
|
|
goto fail;
|
|
}
|
|
|
|
ns++;
|
|
|
|
if ((get_real_vendor_id(dir, &vendor_id, &local_err), local_err) ||
|
|
(get_real_device_id(dir, &device_id, &local_err), local_err)) {
|
|
/* We're already analyzing an assignment error, so we suppress this
|
|
* one just like the others above.
|
|
*/
|
|
error_free(local_err);
|
|
goto fail;
|
|
}
|
|
|
|
return g_strdup_printf(
|
|
"*** The driver '%s' is occupying your device %04x:%02x:%02x.%x.\n"
|
|
"***\n"
|
|
"*** You can try the following commands to free it:\n"
|
|
"***\n"
|
|
"*** $ echo \"%04x %04x\" > /sys/bus/pci/drivers/pci-stub/new_id\n"
|
|
"*** $ echo \"%04x:%02x:%02x.%x\" > /sys/bus/pci/drivers/%s/unbind\n"
|
|
"*** $ echo \"%04x:%02x:%02x.%x\" > /sys/bus/pci/drivers/"
|
|
"pci-stub/bind\n"
|
|
"*** $ echo \"%04x %04x\" > /sys/bus/pci/drivers/pci-stub/remove_id\n"
|
|
"***\n",
|
|
ns, dev->host.domain, dev->host.bus, dev->host.slot,
|
|
dev->host.function, vendor_id, device_id,
|
|
dev->host.domain, dev->host.bus, dev->host.slot, dev->host.function,
|
|
ns, dev->host.domain, dev->host.bus, dev->host.slot,
|
|
dev->host.function, vendor_id, device_id);
|
|
|
|
fail:
|
|
return g_strdup("Couldn't find out why.\n");
|
|
}
|
|
|
|
static void assign_device(AssignedDevice *dev, Error **errp)
|
|
{
|
|
uint32_t flags = KVM_DEV_ASSIGN_ENABLE_IOMMU;
|
|
int r;
|
|
|
|
/* Only pass non-zero PCI segment to capable module */
|
|
if (!kvm_check_extension(kvm_state, KVM_CAP_PCI_SEGMENT) &&
|
|
dev->host.domain) {
|
|
error_setg(errp, "Can't assign device inside non-zero PCI segment "
|
|
"as this KVM module doesn't support it.");
|
|
return;
|
|
}
|
|
|
|
if (!kvm_check_extension(kvm_state, KVM_CAP_IOMMU)) {
|
|
error_setg(errp, "No IOMMU found. Unable to assign device \"%s\"",
|
|
dev->dev.qdev.id);
|
|
return;
|
|
}
|
|
|
|
if (dev->features & ASSIGNED_DEVICE_SHARE_INTX_MASK &&
|
|
kvm_has_intx_set_mask()) {
|
|
flags |= KVM_DEV_ASSIGN_PCI_2_3;
|
|
}
|
|
|
|
r = kvm_device_pci_assign(kvm_state, &dev->host, flags, &dev->dev_id);
|
|
if (r < 0) {
|
|
switch (r) {
|
|
case -EBUSY: {
|
|
char *cause;
|
|
|
|
cause = assign_failed_examine(dev);
|
|
error_setg_errno(errp, -r, "Failed to assign device \"%s\"",
|
|
dev->dev.qdev.id);
|
|
error_append_hint(errp, "%s", cause);
|
|
g_free(cause);
|
|
break;
|
|
}
|
|
default:
|
|
error_setg_errno(errp, -r, "Failed to assign device \"%s\"",
|
|
dev->dev.qdev.id);
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
|
|
static int verify_irqchip_in_kernel(Error **errp)
|
|
{
|
|
if (kvm_irqchip_in_kernel()) {
|
|
return -1;
|
|
}
|
|
error_setg(errp, "pci-assign requires KVM with in-kernel irqchip enabled");
|
|
return 0;
|
|
}
|
|
|
|
static int assign_intx(AssignedDevice *dev, Error **errp)
|
|
{
|
|
AssignedIRQType new_type;
|
|
PCIINTxRoute intx_route;
|
|
bool intx_host_msi;
|
|
int r;
|
|
|
|
/* Interrupt PIN 0 means don't use INTx */
|
|
if (assigned_dev_pci_read_byte(&dev->dev, PCI_INTERRUPT_PIN) == 0) {
|
|
pci_device_set_intx_routing_notifier(&dev->dev, NULL);
|
|
return 0;
|
|
}
|
|
|
|
if (verify_irqchip_in_kernel(errp) < 0) {
|
|
return -ENOTSUP;
|
|
}
|
|
|
|
pci_device_set_intx_routing_notifier(&dev->dev,
|
|
assigned_dev_update_irq_routing);
|
|
|
|
intx_route = pci_device_route_intx_to_irq(&dev->dev, dev->intpin);
|
|
assert(intx_route.mode != PCI_INTX_INVERTED);
|
|
|
|
if (!pci_intx_route_changed(&dev->intx_route, &intx_route)) {
|
|
return 0;
|
|
}
|
|
|
|
switch (dev->assigned_irq_type) {
|
|
case ASSIGNED_IRQ_INTX_HOST_INTX:
|
|
case ASSIGNED_IRQ_INTX_HOST_MSI:
|
|
intx_host_msi = dev->assigned_irq_type == ASSIGNED_IRQ_INTX_HOST_MSI;
|
|
r = kvm_device_intx_deassign(kvm_state, dev->dev_id, intx_host_msi);
|
|
break;
|
|
case ASSIGNED_IRQ_MSI:
|
|
r = kvm_device_msi_deassign(kvm_state, dev->dev_id);
|
|
break;
|
|
case ASSIGNED_IRQ_MSIX:
|
|
r = kvm_device_msix_deassign(kvm_state, dev->dev_id);
|
|
break;
|
|
default:
|
|
r = 0;
|
|
break;
|
|
}
|
|
if (r) {
|
|
perror("assign_intx: deassignment of previous interrupt failed");
|
|
}
|
|
dev->assigned_irq_type = ASSIGNED_IRQ_NONE;
|
|
|
|
if (intx_route.mode == PCI_INTX_DISABLED) {
|
|
dev->intx_route = intx_route;
|
|
return 0;
|
|
}
|
|
|
|
retry:
|
|
if (dev->features & ASSIGNED_DEVICE_PREFER_MSI_MASK &&
|
|
dev->cap.available & ASSIGNED_DEVICE_CAP_MSI) {
|
|
intx_host_msi = true;
|
|
new_type = ASSIGNED_IRQ_INTX_HOST_MSI;
|
|
} else {
|
|
intx_host_msi = false;
|
|
new_type = ASSIGNED_IRQ_INTX_HOST_INTX;
|
|
}
|
|
|
|
r = kvm_device_intx_assign(kvm_state, dev->dev_id, intx_host_msi,
|
|
intx_route.irq);
|
|
if (r < 0) {
|
|
if (r == -EIO && !(dev->features & ASSIGNED_DEVICE_PREFER_MSI_MASK) &&
|
|
dev->cap.available & ASSIGNED_DEVICE_CAP_MSI) {
|
|
/* Retry with host-side MSI. There might be an IRQ conflict and
|
|
* either the kernel or the device doesn't support sharing. */
|
|
error_report("Host-side INTx sharing not supported, "
|
|
"using MSI instead");
|
|
error_printf("Some devices do not work properly in this mode.\n");
|
|
dev->features |= ASSIGNED_DEVICE_PREFER_MSI_MASK;
|
|
goto retry;
|
|
}
|
|
error_setg_errno(errp, -r, "Failed to assign irq for \"%s\"",
|
|
dev->dev.qdev.id);
|
|
error_append_hint(errp, "Perhaps you are assigning a device "
|
|
"that shares an IRQ with another device?\n");
|
|
return r;
|
|
}
|
|
|
|
dev->intx_route = intx_route;
|
|
dev->assigned_irq_type = new_type;
|
|
return r;
|
|
}
|
|
|
|
static void deassign_device(AssignedDevice *dev)
|
|
{
|
|
int r;
|
|
|
|
r = kvm_device_pci_deassign(kvm_state, dev->dev_id);
|
|
assert(r == 0);
|
|
}
|
|
|
|
/* The pci config space got updated. Check if irq numbers have changed
|
|
* for our devices
|
|
*/
|
|
static void assigned_dev_update_irq_routing(PCIDevice *dev)
|
|
{
|
|
AssignedDevice *assigned_dev = PCI_ASSIGN(dev);
|
|
Error *err = NULL;
|
|
int r;
|
|
|
|
r = assign_intx(assigned_dev, &err);
|
|
if (r < 0) {
|
|
error_report_err(err);
|
|
err = NULL;
|
|
qdev_unplug(&dev->qdev, &err);
|
|
assert(!err);
|
|
}
|
|
}
|
|
|
|
static void assigned_dev_update_msi(PCIDevice *pci_dev)
|
|
{
|
|
AssignedDevice *assigned_dev = PCI_ASSIGN(pci_dev);
|
|
uint8_t ctrl_byte = pci_get_byte(pci_dev->config + pci_dev->msi_cap +
|
|
PCI_MSI_FLAGS);
|
|
int r;
|
|
|
|
/* Some guests gratuitously disable MSI even if they're not using it,
|
|
* try to catch this by only deassigning irqs if the guest is using
|
|
* MSI or intends to start. */
|
|
if (assigned_dev->assigned_irq_type == ASSIGNED_IRQ_MSI ||
|
|
(ctrl_byte & PCI_MSI_FLAGS_ENABLE)) {
|
|
r = kvm_device_msi_deassign(kvm_state, assigned_dev->dev_id);
|
|
/* -ENXIO means no assigned irq */
|
|
if (r && r != -ENXIO) {
|
|
perror("assigned_dev_update_msi: deassign irq");
|
|
}
|
|
|
|
free_msi_virqs(assigned_dev);
|
|
|
|
assigned_dev->assigned_irq_type = ASSIGNED_IRQ_NONE;
|
|
pci_device_set_intx_routing_notifier(pci_dev, NULL);
|
|
}
|
|
|
|
if (ctrl_byte & PCI_MSI_FLAGS_ENABLE) {
|
|
int virq;
|
|
|
|
virq = kvm_irqchip_add_msi_route(kvm_state, 0, pci_dev);
|
|
if (virq < 0) {
|
|
perror("assigned_dev_update_msi: kvm_irqchip_add_msi_route");
|
|
return;
|
|
}
|
|
|
|
assigned_dev->msi_virq = g_malloc(sizeof(*assigned_dev->msi_virq));
|
|
assigned_dev->msi_virq_nr = 1;
|
|
assigned_dev->msi_virq[0] = virq;
|
|
if (kvm_device_msi_assign(kvm_state, assigned_dev->dev_id, virq) < 0) {
|
|
perror("assigned_dev_update_msi: kvm_device_msi_assign");
|
|
}
|
|
|
|
assigned_dev->intx_route.mode = PCI_INTX_DISABLED;
|
|
assigned_dev->intx_route.irq = -1;
|
|
assigned_dev->assigned_irq_type = ASSIGNED_IRQ_MSI;
|
|
} else {
|
|
Error *local_err = NULL;
|
|
|
|
assign_intx(assigned_dev, &local_err);
|
|
if (local_err) {
|
|
error_report_err(local_err);
|
|
}
|
|
}
|
|
}
|
|
|
|
static void assigned_dev_update_msi_msg(PCIDevice *pci_dev)
|
|
{
|
|
AssignedDevice *assigned_dev = PCI_ASSIGN(pci_dev);
|
|
uint8_t ctrl_byte = pci_get_byte(pci_dev->config + pci_dev->msi_cap +
|
|
PCI_MSI_FLAGS);
|
|
|
|
if (assigned_dev->assigned_irq_type != ASSIGNED_IRQ_MSI ||
|
|
!(ctrl_byte & PCI_MSI_FLAGS_ENABLE)) {
|
|
return;
|
|
}
|
|
|
|
kvm_irqchip_update_msi_route(kvm_state, assigned_dev->msi_virq[0],
|
|
msi_get_message(pci_dev, 0), pci_dev);
|
|
kvm_irqchip_commit_routes(kvm_state);
|
|
}
|
|
|
|
static bool assigned_dev_msix_masked(MSIXTableEntry *entry)
|
|
{
|
|
return (entry->ctrl & cpu_to_le32(0x1)) != 0;
|
|
}
|
|
|
|
/*
|
|
* When MSI-X is first enabled the vector table typically has all the
|
|
* vectors masked, so we can't use that as the obvious test to figure out
|
|
* how many vectors to initially enable. Instead we look at the data field
|
|
* because this is what worked for pci-assign for a long time. This makes
|
|
* sure the physical MSI-X state tracks the guest's view, which is important
|
|
* for some VF/PF and PF/fw communication channels.
|
|
*/
|
|
static bool assigned_dev_msix_skipped(MSIXTableEntry *entry)
|
|
{
|
|
return !entry->data;
|
|
}
|
|
|
|
static int assigned_dev_update_msix_mmio(PCIDevice *pci_dev)
|
|
{
|
|
AssignedDevice *adev = PCI_ASSIGN(pci_dev);
|
|
uint16_t entries_nr = 0;
|
|
int i, r = 0;
|
|
MSIXTableEntry *entry = adev->msix_table;
|
|
|
|
/* Get the usable entry number for allocating */
|
|
for (i = 0; i < adev->msix_max; i++, entry++) {
|
|
if (assigned_dev_msix_skipped(entry)) {
|
|
continue;
|
|
}
|
|
entries_nr++;
|
|
}
|
|
|
|
DEBUG("MSI-X entries: %d\n", entries_nr);
|
|
|
|
/* It's valid to enable MSI-X with all entries masked */
|
|
if (!entries_nr) {
|
|
return 0;
|
|
}
|
|
|
|
r = kvm_device_msix_init_vectors(kvm_state, adev->dev_id, entries_nr);
|
|
if (r != 0) {
|
|
error_report("fail to set MSI-X entry number for MSIX! %s",
|
|
strerror(-r));
|
|
return r;
|
|
}
|
|
|
|
free_msi_virqs(adev);
|
|
|
|
adev->msi_virq_nr = adev->msix_max;
|
|
adev->msi_virq = g_malloc(adev->msix_max * sizeof(*adev->msi_virq));
|
|
|
|
entry = adev->msix_table;
|
|
for (i = 0; i < adev->msix_max; i++, entry++) {
|
|
adev->msi_virq[i] = -1;
|
|
|
|
if (assigned_dev_msix_skipped(entry)) {
|
|
continue;
|
|
}
|
|
|
|
r = kvm_irqchip_add_msi_route(kvm_state, i, pci_dev);
|
|
if (r < 0) {
|
|
return r;
|
|
}
|
|
adev->msi_virq[i] = r;
|
|
|
|
DEBUG("MSI-X vector %d, gsi %d, addr %08x_%08x, data %08x\n", i,
|
|
r, entry->addr_hi, entry->addr_lo, entry->data);
|
|
|
|
r = kvm_device_msix_set_vector(kvm_state, adev->dev_id, i,
|
|
adev->msi_virq[i]);
|
|
if (r) {
|
|
error_report("fail to set MSI-X entry! %s", strerror(-r));
|
|
break;
|
|
}
|
|
}
|
|
|
|
return r;
|
|
}
|
|
|
|
static void assigned_dev_update_msix(PCIDevice *pci_dev)
|
|
{
|
|
AssignedDevice *assigned_dev = PCI_ASSIGN(pci_dev);
|
|
uint16_t ctrl_word = pci_get_word(pci_dev->config + pci_dev->msix_cap +
|
|
PCI_MSIX_FLAGS);
|
|
int r;
|
|
|
|
/* Some guests gratuitously disable MSIX even if they're not using it,
|
|
* try to catch this by only deassigning irqs if the guest is using
|
|
* MSIX or intends to start. */
|
|
if ((assigned_dev->assigned_irq_type == ASSIGNED_IRQ_MSIX) ||
|
|
(ctrl_word & PCI_MSIX_FLAGS_ENABLE)) {
|
|
r = kvm_device_msix_deassign(kvm_state, assigned_dev->dev_id);
|
|
/* -ENXIO means no assigned irq */
|
|
if (r && r != -ENXIO) {
|
|
perror("assigned_dev_update_msix: deassign irq");
|
|
}
|
|
|
|
free_msi_virqs(assigned_dev);
|
|
|
|
assigned_dev->assigned_irq_type = ASSIGNED_IRQ_NONE;
|
|
pci_device_set_intx_routing_notifier(pci_dev, NULL);
|
|
}
|
|
|
|
if (ctrl_word & PCI_MSIX_FLAGS_ENABLE) {
|
|
if (assigned_dev_update_msix_mmio(pci_dev) < 0) {
|
|
perror("assigned_dev_update_msix_mmio");
|
|
return;
|
|
}
|
|
|
|
if (assigned_dev->msi_virq_nr > 0) {
|
|
if (kvm_device_msix_assign(kvm_state, assigned_dev->dev_id) < 0) {
|
|
perror("assigned_dev_enable_msix: assign irq");
|
|
return;
|
|
}
|
|
}
|
|
assigned_dev->intx_route.mode = PCI_INTX_DISABLED;
|
|
assigned_dev->intx_route.irq = -1;
|
|
assigned_dev->assigned_irq_type = ASSIGNED_IRQ_MSIX;
|
|
} else {
|
|
Error *local_err = NULL;
|
|
|
|
assign_intx(assigned_dev, &local_err);
|
|
if (local_err) {
|
|
error_report_err(local_err);
|
|
}
|
|
}
|
|
}
|
|
|
|
static uint32_t assigned_dev_pci_read_config(PCIDevice *pci_dev,
|
|
uint32_t address, int len)
|
|
{
|
|
AssignedDevice *assigned_dev = PCI_ASSIGN(pci_dev);
|
|
uint32_t virt_val = pci_default_read_config(pci_dev, address, len);
|
|
uint32_t real_val, emulate_mask, full_emulation_mask;
|
|
|
|
emulate_mask = 0;
|
|
memcpy(&emulate_mask, assigned_dev->emulate_config_read + address, len);
|
|
emulate_mask = le32_to_cpu(emulate_mask);
|
|
|
|
full_emulation_mask = 0xffffffff >> (32 - len * 8);
|
|
|
|
if (emulate_mask != full_emulation_mask) {
|
|
real_val = assigned_dev_pci_read(pci_dev, address, len);
|
|
return (virt_val & emulate_mask) | (real_val & ~emulate_mask);
|
|
} else {
|
|
return virt_val;
|
|
}
|
|
}
|
|
|
|
static void assigned_dev_pci_write_config(PCIDevice *pci_dev, uint32_t address,
|
|
uint32_t val, int len)
|
|
{
|
|
AssignedDevice *assigned_dev = PCI_ASSIGN(pci_dev);
|
|
uint16_t old_cmd = pci_get_word(pci_dev->config + PCI_COMMAND);
|
|
uint32_t emulate_mask, full_emulation_mask;
|
|
int ret;
|
|
|
|
pci_default_write_config(pci_dev, address, val, len);
|
|
|
|
if (kvm_has_intx_set_mask() &&
|
|
range_covers_byte(address, len, PCI_COMMAND + 1)) {
|
|
bool intx_masked = (pci_get_word(pci_dev->config + PCI_COMMAND) &
|
|
PCI_COMMAND_INTX_DISABLE);
|
|
|
|
if (intx_masked != !!(old_cmd & PCI_COMMAND_INTX_DISABLE)) {
|
|
ret = kvm_device_intx_set_mask(kvm_state, assigned_dev->dev_id,
|
|
intx_masked);
|
|
if (ret) {
|
|
perror("assigned_dev_pci_write_config: set intx mask");
|
|
}
|
|
}
|
|
}
|
|
if (assigned_dev->cap.available & ASSIGNED_DEVICE_CAP_MSI) {
|
|
if (range_covers_byte(address, len,
|
|
pci_dev->msi_cap + PCI_MSI_FLAGS)) {
|
|
assigned_dev_update_msi(pci_dev);
|
|
} else if (ranges_overlap(address, len, /* 32bit MSI only */
|
|
pci_dev->msi_cap + PCI_MSI_ADDRESS_LO, 6)) {
|
|
assigned_dev_update_msi_msg(pci_dev);
|
|
}
|
|
}
|
|
if (assigned_dev->cap.available & ASSIGNED_DEVICE_CAP_MSIX) {
|
|
if (range_covers_byte(address, len,
|
|
pci_dev->msix_cap + PCI_MSIX_FLAGS + 1)) {
|
|
assigned_dev_update_msix(pci_dev);
|
|
}
|
|
}
|
|
|
|
emulate_mask = 0;
|
|
memcpy(&emulate_mask, assigned_dev->emulate_config_write + address, len);
|
|
emulate_mask = le32_to_cpu(emulate_mask);
|
|
|
|
full_emulation_mask = 0xffffffff >> (32 - len * 8);
|
|
|
|
if (emulate_mask != full_emulation_mask) {
|
|
if (emulate_mask) {
|
|
val &= ~emulate_mask;
|
|
val |= assigned_dev_pci_read(pci_dev, address, len) & emulate_mask;
|
|
}
|
|
assigned_dev_pci_write(pci_dev, address, val, len);
|
|
}
|
|
}
|
|
|
|
static void assigned_dev_setup_cap_read(AssignedDevice *dev, uint32_t offset,
|
|
uint32_t len)
|
|
{
|
|
assigned_dev_direct_config_read(dev, offset, len);
|
|
assigned_dev_emulate_config_read(dev, offset + PCI_CAP_LIST_NEXT, 1);
|
|
}
|
|
|
|
static int assigned_device_pci_cap_init(PCIDevice *pci_dev, Error **errp)
|
|
{
|
|
AssignedDevice *dev = PCI_ASSIGN(pci_dev);
|
|
PCIRegion *pci_region = dev->real_device.regions;
|
|
int ret, pos;
|
|
|
|
/* Clear initial capabilities pointer and status copied from hw */
|
|
pci_set_byte(pci_dev->config + PCI_CAPABILITY_LIST, 0);
|
|
pci_set_word(pci_dev->config + PCI_STATUS,
|
|
pci_get_word(pci_dev->config + PCI_STATUS) &
|
|
~PCI_STATUS_CAP_LIST);
|
|
|
|
/* Expose MSI capability
|
|
* MSI capability is the 1st capability in capability config */
|
|
pos = pci_find_cap_offset(pci_dev, PCI_CAP_ID_MSI, 0);
|
|
if (pos != 0 && kvm_check_extension(kvm_state, KVM_CAP_ASSIGN_DEV_IRQ)) {
|
|
if (verify_irqchip_in_kernel(errp) < 0) {
|
|
return -ENOTSUP;
|
|
}
|
|
dev->dev.cap_present |= QEMU_PCI_CAP_MSI;
|
|
dev->cap.available |= ASSIGNED_DEVICE_CAP_MSI;
|
|
/* Only 32-bit/no-mask currently supported */
|
|
ret = pci_add_capability(pci_dev, PCI_CAP_ID_MSI, pos, 10,
|
|
errp);
|
|
if (ret < 0) {
|
|
return ret;
|
|
}
|
|
pci_dev->msi_cap = pos;
|
|
|
|
pci_set_word(pci_dev->config + pos + PCI_MSI_FLAGS,
|
|
pci_get_word(pci_dev->config + pos + PCI_MSI_FLAGS) &
|
|
PCI_MSI_FLAGS_QMASK);
|
|
pci_set_long(pci_dev->config + pos + PCI_MSI_ADDRESS_LO, 0);
|
|
pci_set_word(pci_dev->config + pos + PCI_MSI_DATA_32, 0);
|
|
|
|
/* Set writable fields */
|
|
pci_set_word(pci_dev->wmask + pos + PCI_MSI_FLAGS,
|
|
PCI_MSI_FLAGS_QSIZE | PCI_MSI_FLAGS_ENABLE);
|
|
pci_set_long(pci_dev->wmask + pos + PCI_MSI_ADDRESS_LO, 0xfffffffc);
|
|
pci_set_word(pci_dev->wmask + pos + PCI_MSI_DATA_32, 0xffff);
|
|
}
|
|
/* Expose MSI-X capability */
|
|
pos = pci_find_cap_offset(pci_dev, PCI_CAP_ID_MSIX, 0);
|
|
if (pos != 0 && kvm_device_msix_supported(kvm_state)) {
|
|
int bar_nr;
|
|
uint32_t msix_table_entry;
|
|
uint16_t msix_max;
|
|
|
|
if (verify_irqchip_in_kernel(errp) < 0) {
|
|
return -ENOTSUP;
|
|
}
|
|
dev->dev.cap_present |= QEMU_PCI_CAP_MSIX;
|
|
dev->cap.available |= ASSIGNED_DEVICE_CAP_MSIX;
|
|
ret = pci_add_capability(pci_dev, PCI_CAP_ID_MSIX, pos, 12,
|
|
errp);
|
|
if (ret < 0) {
|
|
return ret;
|
|
}
|
|
pci_dev->msix_cap = pos;
|
|
|
|
msix_max = (pci_get_word(pci_dev->config + pos + PCI_MSIX_FLAGS) &
|
|
PCI_MSIX_FLAGS_QSIZE) + 1;
|
|
msix_max = MIN(msix_max, KVM_MAX_MSIX_PER_DEV);
|
|
pci_set_word(pci_dev->config + pos + PCI_MSIX_FLAGS, msix_max - 1);
|
|
|
|
/* Only enable and function mask bits are writable */
|
|
pci_set_word(pci_dev->wmask + pos + PCI_MSIX_FLAGS,
|
|
PCI_MSIX_FLAGS_ENABLE | PCI_MSIX_FLAGS_MASKALL);
|
|
|
|
msix_table_entry = pci_get_long(pci_dev->config + pos + PCI_MSIX_TABLE);
|
|
bar_nr = msix_table_entry & PCI_MSIX_FLAGS_BIRMASK;
|
|
msix_table_entry &= ~PCI_MSIX_FLAGS_BIRMASK;
|
|
dev->msix_table_addr = pci_region[bar_nr].base_addr + msix_table_entry;
|
|
dev->msix_table_size = msix_max * sizeof(MSIXTableEntry);
|
|
dev->msix_max = msix_max;
|
|
}
|
|
|
|
/* Minimal PM support, nothing writable, device appears to NAK changes */
|
|
pos = pci_find_cap_offset(pci_dev, PCI_CAP_ID_PM, 0);
|
|
if (pos) {
|
|
uint16_t pmc;
|
|
|
|
ret = pci_add_capability(pci_dev, PCI_CAP_ID_PM, pos, PCI_PM_SIZEOF,
|
|
errp);
|
|
if (ret < 0) {
|
|
return ret;
|
|
}
|
|
|
|
assigned_dev_setup_cap_read(dev, pos, PCI_PM_SIZEOF);
|
|
|
|
pmc = pci_get_word(pci_dev->config + pos + PCI_CAP_FLAGS);
|
|
pmc &= (PCI_PM_CAP_VER_MASK | PCI_PM_CAP_DSI);
|
|
pci_set_word(pci_dev->config + pos + PCI_CAP_FLAGS, pmc);
|
|
|
|
/* assign_device will bring the device up to D0, so we don't need
|
|
* to worry about doing that ourselves here. */
|
|
pci_set_word(pci_dev->config + pos + PCI_PM_CTRL,
|
|
PCI_PM_CTRL_NO_SOFT_RESET);
|
|
|
|
pci_set_byte(pci_dev->config + pos + PCI_PM_PPB_EXTENSIONS, 0);
|
|
pci_set_byte(pci_dev->config + pos + PCI_PM_DATA_REGISTER, 0);
|
|
}
|
|
|
|
pos = pci_find_cap_offset(pci_dev, PCI_CAP_ID_EXP, 0);
|
|
if (pos) {
|
|
uint8_t version, size = 0;
|
|
uint16_t type, devctl, lnksta;
|
|
uint32_t devcap, lnkcap;
|
|
|
|
version = pci_get_byte(pci_dev->config + pos + PCI_EXP_FLAGS);
|
|
version &= PCI_EXP_FLAGS_VERS;
|
|
if (version == 1) {
|
|
size = 0x14;
|
|
} else if (version == 2) {
|
|
/*
|
|
* Check for non-std size, accept reduced size to 0x34,
|
|
* which is what bcm5761 implemented, violating the
|
|
* PCIe v3.0 spec that regs should exist and be read as 0,
|
|
* not optionally provided and shorten the struct size.
|
|
*/
|
|
size = MIN(0x3c, PCI_CONFIG_SPACE_SIZE - pos);
|
|
if (size < 0x34) {
|
|
error_setg(errp, "Invalid size PCIe cap-id 0x%x",
|
|
PCI_CAP_ID_EXP);
|
|
return -EINVAL;
|
|
} else if (size != 0x3c) {
|
|
warn_report("%s: PCIe cap-id 0x%x has "
|
|
"non-standard size 0x%x; std size should be 0x3c",
|
|
__func__, PCI_CAP_ID_EXP, size);
|
|
}
|
|
} else if (version == 0) {
|
|
uint16_t vid, did;
|
|
vid = pci_get_word(pci_dev->config + PCI_VENDOR_ID);
|
|
did = pci_get_word(pci_dev->config + PCI_DEVICE_ID);
|
|
if (vid == PCI_VENDOR_ID_INTEL && did == 0x10ed) {
|
|
/*
|
|
* quirk for Intel 82599 VF with invalid PCIe capability
|
|
* version, should really be version 2 (same as PF)
|
|
*/
|
|
size = 0x3c;
|
|
}
|
|
}
|
|
|
|
if (size == 0) {
|
|
error_setg(errp, "Unsupported PCI express capability version %d",
|
|
version);
|
|
return -EINVAL;
|
|
}
|
|
|
|
ret = pci_add_capability(pci_dev, PCI_CAP_ID_EXP, pos, size,
|
|
errp);
|
|
if (ret < 0) {
|
|
return ret;
|
|
}
|
|
|
|
assigned_dev_setup_cap_read(dev, pos, size);
|
|
|
|
type = pci_get_word(pci_dev->config + pos + PCI_EXP_FLAGS);
|
|
type = (type & PCI_EXP_FLAGS_TYPE) >> 4;
|
|
if (type != PCI_EXP_TYPE_ENDPOINT &&
|
|
type != PCI_EXP_TYPE_LEG_END && type != PCI_EXP_TYPE_RC_END) {
|
|
error_setg(errp, "Device assignment only supports endpoint "
|
|
"assignment, device type %d", type);
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* capabilities, pass existing read-only copy
|
|
* PCI_EXP_FLAGS_IRQ: updated by hardware, should be direct read */
|
|
|
|
/* device capabilities: hide FLR */
|
|
devcap = pci_get_long(pci_dev->config + pos + PCI_EXP_DEVCAP);
|
|
devcap &= ~PCI_EXP_DEVCAP_FLR;
|
|
pci_set_long(pci_dev->config + pos + PCI_EXP_DEVCAP, devcap);
|
|
|
|
/* device control: clear all error reporting enable bits, leaving
|
|
* only a few host values. Note, these are
|
|
* all writable, but not passed to hw.
|
|
*/
|
|
devctl = pci_get_word(pci_dev->config + pos + PCI_EXP_DEVCTL);
|
|
devctl = (devctl & (PCI_EXP_DEVCTL_READRQ | PCI_EXP_DEVCTL_PAYLOAD)) |
|
|
PCI_EXP_DEVCTL_RELAX_EN | PCI_EXP_DEVCTL_NOSNOOP_EN;
|
|
pci_set_word(pci_dev->config + pos + PCI_EXP_DEVCTL, devctl);
|
|
devctl = PCI_EXP_DEVCTL_BCR_FLR | PCI_EXP_DEVCTL_AUX_PME;
|
|
pci_set_word(pci_dev->wmask + pos + PCI_EXP_DEVCTL, ~devctl);
|
|
|
|
/* Clear device status */
|
|
pci_set_word(pci_dev->config + pos + PCI_EXP_DEVSTA, 0);
|
|
|
|
/* Link capabilities, expose links and latencues, clear reporting */
|
|
lnkcap = pci_get_long(pci_dev->config + pos + PCI_EXP_LNKCAP);
|
|
lnkcap &= (PCI_EXP_LNKCAP_SLS | PCI_EXP_LNKCAP_MLW |
|
|
PCI_EXP_LNKCAP_ASPMS | PCI_EXP_LNKCAP_L0SEL |
|
|
PCI_EXP_LNKCAP_L1EL);
|
|
pci_set_long(pci_dev->config + pos + PCI_EXP_LNKCAP, lnkcap);
|
|
|
|
/* Link control, pass existing read-only copy. Should be writable? */
|
|
|
|
/* Link status, only expose current speed and width */
|
|
lnksta = pci_get_word(pci_dev->config + pos + PCI_EXP_LNKSTA);
|
|
lnksta &= (PCI_EXP_LNKSTA_CLS | PCI_EXP_LNKSTA_NLW);
|
|
pci_set_word(pci_dev->config + pos + PCI_EXP_LNKSTA, lnksta);
|
|
|
|
if (version >= 2) {
|
|
/* Slot capabilities, control, status - not needed for endpoints */
|
|
pci_set_long(pci_dev->config + pos + PCI_EXP_SLTCAP, 0);
|
|
pci_set_word(pci_dev->config + pos + PCI_EXP_SLTCTL, 0);
|
|
pci_set_word(pci_dev->config + pos + PCI_EXP_SLTSTA, 0);
|
|
|
|
/* Root control, capabilities, status - not needed for endpoints */
|
|
pci_set_word(pci_dev->config + pos + PCI_EXP_RTCTL, 0);
|
|
pci_set_word(pci_dev->config + pos + PCI_EXP_RTCAP, 0);
|
|
pci_set_long(pci_dev->config + pos + PCI_EXP_RTSTA, 0);
|
|
|
|
/* Device capabilities/control 2, pass existing read-only copy */
|
|
/* Link control 2, pass existing read-only copy */
|
|
}
|
|
}
|
|
|
|
pos = pci_find_cap_offset(pci_dev, PCI_CAP_ID_PCIX, 0);
|
|
if (pos) {
|
|
uint16_t cmd;
|
|
uint32_t status;
|
|
|
|
/* Only expose the minimum, 8 byte capability */
|
|
ret = pci_add_capability(pci_dev, PCI_CAP_ID_PCIX, pos, 8,
|
|
errp);
|
|
if (ret < 0) {
|
|
return ret;
|
|
}
|
|
|
|
assigned_dev_setup_cap_read(dev, pos, 8);
|
|
|
|
/* Command register, clear upper bits, including extended modes */
|
|
cmd = pci_get_word(pci_dev->config + pos + PCI_X_CMD);
|
|
cmd &= (PCI_X_CMD_DPERR_E | PCI_X_CMD_ERO | PCI_X_CMD_MAX_READ |
|
|
PCI_X_CMD_MAX_SPLIT);
|
|
pci_set_word(pci_dev->config + pos + PCI_X_CMD, cmd);
|
|
|
|
/* Status register, update with emulated PCI bus location, clear
|
|
* error bits, leave the rest. */
|
|
status = pci_get_long(pci_dev->config + pos + PCI_X_STATUS);
|
|
status &= ~(PCI_X_STATUS_BUS | PCI_X_STATUS_DEVFN);
|
|
status |= pci_get_bdf(pci_dev);
|
|
status &= ~(PCI_X_STATUS_SPL_DISC | PCI_X_STATUS_UNX_SPL |
|
|
PCI_X_STATUS_SPL_ERR);
|
|
pci_set_long(pci_dev->config + pos + PCI_X_STATUS, status);
|
|
}
|
|
|
|
pos = pci_find_cap_offset(pci_dev, PCI_CAP_ID_VPD, 0);
|
|
if (pos) {
|
|
/* Direct R/W passthrough */
|
|
ret = pci_add_capability(pci_dev, PCI_CAP_ID_VPD, pos, 8,
|
|
errp);
|
|
if (ret < 0) {
|
|
return ret;
|
|
}
|
|
|
|
assigned_dev_setup_cap_read(dev, pos, 8);
|
|
|
|
/* direct write for cap content */
|
|
assigned_dev_direct_config_write(dev, pos + 2, 6);
|
|
}
|
|
|
|
/* Devices can have multiple vendor capabilities, get them all */
|
|
for (pos = 0; (pos = pci_find_cap_offset(pci_dev, PCI_CAP_ID_VNDR, pos));
|
|
pos += PCI_CAP_LIST_NEXT) {
|
|
uint8_t len = pci_get_byte(pci_dev->config + pos + PCI_CAP_FLAGS);
|
|
/* Direct R/W passthrough */
|
|
ret = pci_add_capability(pci_dev, PCI_CAP_ID_VNDR, pos, len,
|
|
errp);
|
|
if (ret < 0) {
|
|
return ret;
|
|
}
|
|
|
|
assigned_dev_setup_cap_read(dev, pos, len);
|
|
|
|
/* direct write for cap content */
|
|
assigned_dev_direct_config_write(dev, pos + 2, len - 2);
|
|
}
|
|
|
|
/* If real and virtual capability list status bits differ, virtualize the
|
|
* access. */
|
|
if ((pci_get_word(pci_dev->config + PCI_STATUS) & PCI_STATUS_CAP_LIST) !=
|
|
(assigned_dev_pci_read_byte(pci_dev, PCI_STATUS) &
|
|
PCI_STATUS_CAP_LIST)) {
|
|
dev->emulate_config_read[PCI_STATUS] |= PCI_STATUS_CAP_LIST;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static uint64_t
|
|
assigned_dev_msix_mmio_read(void *opaque, hwaddr addr,
|
|
unsigned size)
|
|
{
|
|
AssignedDevice *adev = opaque;
|
|
uint64_t val;
|
|
|
|
memcpy(&val, (void *)((uint8_t *)adev->msix_table + addr), size);
|
|
|
|
return val;
|
|
}
|
|
|
|
static void assigned_dev_msix_mmio_write(void *opaque, hwaddr addr,
|
|
uint64_t val, unsigned size)
|
|
{
|
|
AssignedDevice *adev = opaque;
|
|
PCIDevice *pdev = &adev->dev;
|
|
uint16_t ctrl;
|
|
MSIXTableEntry orig;
|
|
int i = addr >> 4;
|
|
|
|
if (i >= adev->msix_max) {
|
|
return; /* Drop write */
|
|
}
|
|
|
|
ctrl = pci_get_word(pdev->config + pdev->msix_cap + PCI_MSIX_FLAGS);
|
|
|
|
DEBUG("write to MSI-X table offset 0x%lx, val 0x%lx\n", addr, val);
|
|
|
|
if (ctrl & PCI_MSIX_FLAGS_ENABLE) {
|
|
orig = adev->msix_table[i];
|
|
}
|
|
|
|
memcpy((uint8_t *)adev->msix_table + addr, &val, size);
|
|
|
|
if (ctrl & PCI_MSIX_FLAGS_ENABLE) {
|
|
MSIXTableEntry *entry = &adev->msix_table[i];
|
|
|
|
if (!assigned_dev_msix_masked(&orig) &&
|
|
assigned_dev_msix_masked(entry)) {
|
|
/*
|
|
* Vector masked, disable it
|
|
*
|
|
* XXX It's not clear if we can or should actually attempt
|
|
* to mask or disable the interrupt. KVM doesn't have
|
|
* support for pending bits and kvm_assign_set_msix_entry
|
|
* doesn't modify the device hardware mask. Interrupts
|
|
* while masked are simply not injected to the guest, so
|
|
* are lost. Can we get away with always injecting an
|
|
* interrupt on unmask?
|
|
*/
|
|
} else if (assigned_dev_msix_masked(&orig) &&
|
|
!assigned_dev_msix_masked(entry)) {
|
|
/* Vector unmasked */
|
|
if (i >= adev->msi_virq_nr || adev->msi_virq[i] < 0) {
|
|
/* Previously unassigned vector, start from scratch */
|
|
assigned_dev_update_msix(pdev);
|
|
return;
|
|
} else {
|
|
/* Update an existing, previously masked vector */
|
|
MSIMessage msg;
|
|
int ret;
|
|
|
|
msg.address = entry->addr_lo |
|
|
((uint64_t)entry->addr_hi << 32);
|
|
msg.data = entry->data;
|
|
|
|
ret = kvm_irqchip_update_msi_route(kvm_state,
|
|
adev->msi_virq[i], msg,
|
|
pdev);
|
|
if (ret) {
|
|
error_report("Error updating irq routing entry (%d)", ret);
|
|
}
|
|
kvm_irqchip_commit_routes(kvm_state);
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
static const MemoryRegionOps assigned_dev_msix_mmio_ops = {
|
|
.read = assigned_dev_msix_mmio_read,
|
|
.write = assigned_dev_msix_mmio_write,
|
|
.endianness = DEVICE_NATIVE_ENDIAN,
|
|
.valid = {
|
|
.min_access_size = 4,
|
|
.max_access_size = 8,
|
|
},
|
|
.impl = {
|
|
.min_access_size = 4,
|
|
.max_access_size = 8,
|
|
},
|
|
};
|
|
|
|
static void assigned_dev_msix_reset(AssignedDevice *dev)
|
|
{
|
|
MSIXTableEntry *entry;
|
|
int i;
|
|
|
|
if (!dev->msix_table) {
|
|
return;
|
|
}
|
|
|
|
memset(dev->msix_table, 0, dev->msix_table_size);
|
|
|
|
for (i = 0, entry = dev->msix_table; i < dev->msix_max; i++, entry++) {
|
|
entry->ctrl = cpu_to_le32(0x1); /* Masked */
|
|
}
|
|
}
|
|
|
|
static void assigned_dev_register_msix_mmio(AssignedDevice *dev, Error **errp)
|
|
{
|
|
dev->msix_table = mmap(NULL, dev->msix_table_size, PROT_READ | PROT_WRITE,
|
|
MAP_ANONYMOUS | MAP_PRIVATE, 0, 0);
|
|
if (dev->msix_table == MAP_FAILED) {
|
|
error_setg_errno(errp, errno, "failed to allocate msix_table");
|
|
dev->msix_table = NULL;
|
|
return;
|
|
}
|
|
dev->dev.msix_table = (uint8_t *)dev->msix_table;
|
|
|
|
assigned_dev_msix_reset(dev);
|
|
|
|
memory_region_init_io(&dev->mmio, OBJECT(dev), &assigned_dev_msix_mmio_ops,
|
|
dev, "assigned-dev-msix", dev->msix_table_size);
|
|
}
|
|
|
|
static void assigned_dev_unregister_msix_mmio(AssignedDevice *dev)
|
|
{
|
|
if (!dev->msix_table) {
|
|
return;
|
|
}
|
|
|
|
if (munmap(dev->msix_table, dev->msix_table_size) == -1) {
|
|
error_report("error unmapping msix_table! %s", strerror(errno));
|
|
}
|
|
dev->msix_table = NULL;
|
|
dev->dev.msix_table = NULL;
|
|
}
|
|
|
|
static const VMStateDescription vmstate_assigned_device = {
|
|
.name = "pci-assign",
|
|
.unmigratable = 1,
|
|
};
|
|
|
|
static void reset_assigned_device(DeviceState *dev)
|
|
{
|
|
PCIDevice *pci_dev = PCI_DEVICE(dev);
|
|
AssignedDevice *adev = PCI_ASSIGN(pci_dev);
|
|
char reset_file[64];
|
|
const char reset[] = "1";
|
|
int fd, ret;
|
|
|
|
/*
|
|
* If a guest is reset without being shutdown, MSI/MSI-X can still
|
|
* be running. We want to return the device to a known state on
|
|
* reset, so disable those here. We especially do not want MSI-X
|
|
* enabled since it lives in MMIO space, which is about to get
|
|
* disabled.
|
|
*/
|
|
if (adev->assigned_irq_type == ASSIGNED_IRQ_MSIX) {
|
|
uint16_t ctrl = pci_get_word(pci_dev->config +
|
|
pci_dev->msix_cap + PCI_MSIX_FLAGS);
|
|
|
|
pci_set_word(pci_dev->config + pci_dev->msix_cap + PCI_MSIX_FLAGS,
|
|
ctrl & ~PCI_MSIX_FLAGS_ENABLE);
|
|
assigned_dev_update_msix(pci_dev);
|
|
} else if (adev->assigned_irq_type == ASSIGNED_IRQ_MSI) {
|
|
uint8_t ctrl = pci_get_byte(pci_dev->config +
|
|
pci_dev->msi_cap + PCI_MSI_FLAGS);
|
|
|
|
pci_set_byte(pci_dev->config + pci_dev->msi_cap + PCI_MSI_FLAGS,
|
|
ctrl & ~PCI_MSI_FLAGS_ENABLE);
|
|
assigned_dev_update_msi(pci_dev);
|
|
}
|
|
|
|
snprintf(reset_file, sizeof(reset_file),
|
|
"/sys/bus/pci/devices/%04x:%02x:%02x.%01x/reset",
|
|
adev->host.domain, adev->host.bus, adev->host.slot,
|
|
adev->host.function);
|
|
|
|
/*
|
|
* Issue a device reset via pci-sysfs. Note that we use write(2) here
|
|
* and ignore the return value because some kernels have a bug that
|
|
* returns 0 rather than bytes written on success, sending us into an
|
|
* infinite retry loop using other write mechanisms.
|
|
*/
|
|
fd = open(reset_file, O_WRONLY);
|
|
if (fd != -1) {
|
|
ret = write(fd, reset, strlen(reset));
|
|
(void)ret;
|
|
close(fd);
|
|
}
|
|
|
|
/*
|
|
* When a 0 is written to the bus master register, the device is logically
|
|
* disconnected from the PCI bus. This avoids further DMA transfers.
|
|
*/
|
|
assigned_dev_pci_write_config(pci_dev, PCI_COMMAND, 0, 1);
|
|
}
|
|
|
|
static void assigned_realize(struct PCIDevice *pci_dev, Error **errp)
|
|
{
|
|
AssignedDevice *dev = PCI_ASSIGN(pci_dev);
|
|
uint8_t e_intx;
|
|
int r;
|
|
Error *local_err = NULL;
|
|
|
|
if (!kvm_enabled()) {
|
|
error_setg(&local_err, "pci-assign requires KVM support");
|
|
goto exit_with_error;
|
|
}
|
|
|
|
if (!dev->host.domain && !dev->host.bus && !dev->host.slot &&
|
|
!dev->host.function) {
|
|
error_setg(&local_err, "no host device specified");
|
|
goto exit_with_error;
|
|
}
|
|
|
|
/*
|
|
* Set up basic config space access control. Will be further refined during
|
|
* device initialization.
|
|
*/
|
|
assigned_dev_emulate_config_read(dev, 0, PCI_CONFIG_SPACE_SIZE);
|
|
assigned_dev_direct_config_read(dev, PCI_STATUS, 2);
|
|
assigned_dev_direct_config_read(dev, PCI_REVISION_ID, 1);
|
|
assigned_dev_direct_config_read(dev, PCI_CLASS_PROG, 3);
|
|
assigned_dev_direct_config_read(dev, PCI_CACHE_LINE_SIZE, 1);
|
|
assigned_dev_direct_config_read(dev, PCI_LATENCY_TIMER, 1);
|
|
assigned_dev_direct_config_read(dev, PCI_BIST, 1);
|
|
assigned_dev_direct_config_read(dev, PCI_CARDBUS_CIS, 4);
|
|
assigned_dev_direct_config_read(dev, PCI_SUBSYSTEM_VENDOR_ID, 2);
|
|
assigned_dev_direct_config_read(dev, PCI_SUBSYSTEM_ID, 2);
|
|
assigned_dev_direct_config_read(dev, PCI_CAPABILITY_LIST + 1, 7);
|
|
assigned_dev_direct_config_read(dev, PCI_MIN_GNT, 1);
|
|
assigned_dev_direct_config_read(dev, PCI_MAX_LAT, 1);
|
|
memcpy(dev->emulate_config_write, dev->emulate_config_read,
|
|
sizeof(dev->emulate_config_read));
|
|
|
|
get_real_device(dev, &local_err);
|
|
if (local_err) {
|
|
goto out;
|
|
}
|
|
|
|
if (assigned_device_pci_cap_init(pci_dev, &local_err) < 0) {
|
|
goto out;
|
|
}
|
|
|
|
/* intercept MSI-X entry page in the MMIO */
|
|
if (dev->cap.available & ASSIGNED_DEVICE_CAP_MSIX) {
|
|
assigned_dev_register_msix_mmio(dev, &local_err);
|
|
if (local_err) {
|
|
goto out;
|
|
}
|
|
}
|
|
|
|
/* handle real device's MMIO/PIO BARs */
|
|
assigned_dev_register_regions(dev->real_device.regions,
|
|
dev->real_device.region_number, dev,
|
|
&local_err);
|
|
if (local_err) {
|
|
goto out;
|
|
}
|
|
|
|
/* handle interrupt routing */
|
|
e_intx = dev->dev.config[PCI_INTERRUPT_PIN] - 1;
|
|
dev->intpin = e_intx;
|
|
dev->intx_route.mode = PCI_INTX_DISABLED;
|
|
dev->intx_route.irq = -1;
|
|
|
|
/* assign device to guest */
|
|
assign_device(dev, &local_err);
|
|
if (local_err) {
|
|
goto out;
|
|
}
|
|
|
|
/* assign legacy INTx to the device */
|
|
r = assign_intx(dev, &local_err);
|
|
if (r < 0) {
|
|
goto assigned_out;
|
|
}
|
|
|
|
assigned_dev_load_option_rom(dev);
|
|
|
|
return;
|
|
|
|
assigned_out:
|
|
deassign_device(dev);
|
|
|
|
out:
|
|
free_assigned_device(dev);
|
|
|
|
exit_with_error:
|
|
assert(local_err);
|
|
error_propagate(errp, local_err);
|
|
}
|
|
|
|
static void assigned_exitfn(struct PCIDevice *pci_dev)
|
|
{
|
|
AssignedDevice *dev = PCI_ASSIGN(pci_dev);
|
|
|
|
deassign_device(dev);
|
|
free_assigned_device(dev);
|
|
}
|
|
|
|
static void assigned_dev_instance_init(Object *obj)
|
|
{
|
|
PCIDevice *pci_dev = PCI_DEVICE(obj);
|
|
AssignedDevice *d = PCI_ASSIGN(pci_dev);
|
|
|
|
device_add_bootindex_property(obj, &d->bootindex,
|
|
"bootindex", NULL,
|
|
&pci_dev->qdev, NULL);
|
|
}
|
|
|
|
static Property assigned_dev_properties[] = {
|
|
DEFINE_PROP_PCI_HOST_DEVADDR("host", AssignedDevice, host),
|
|
DEFINE_PROP_BIT("prefer_msi", AssignedDevice, features,
|
|
ASSIGNED_DEVICE_PREFER_MSI_BIT, false),
|
|
DEFINE_PROP_BIT("share_intx", AssignedDevice, features,
|
|
ASSIGNED_DEVICE_SHARE_INTX_BIT, true),
|
|
DEFINE_PROP_STRING("configfd", AssignedDevice, configfd_name),
|
|
DEFINE_PROP_END_OF_LIST(),
|
|
};
|
|
|
|
static void assign_class_init(ObjectClass *klass, void *data)
|
|
{
|
|
PCIDeviceClass *k = PCI_DEVICE_CLASS(klass);
|
|
DeviceClass *dc = DEVICE_CLASS(klass);
|
|
|
|
k->realize = assigned_realize;
|
|
k->exit = assigned_exitfn;
|
|
k->config_read = assigned_dev_pci_read_config;
|
|
k->config_write = assigned_dev_pci_write_config;
|
|
dc->props = assigned_dev_properties;
|
|
dc->vmsd = &vmstate_assigned_device;
|
|
dc->reset = reset_assigned_device;
|
|
set_bit(DEVICE_CATEGORY_MISC, dc->categories);
|
|
dc->desc = "KVM-based PCI passthrough";
|
|
}
|
|
|
|
static const TypeInfo assign_info = {
|
|
.name = TYPE_PCI_ASSIGN,
|
|
.parent = TYPE_PCI_DEVICE,
|
|
.instance_size = sizeof(AssignedDevice),
|
|
.class_init = assign_class_init,
|
|
.instance_init = assigned_dev_instance_init,
|
|
};
|
|
|
|
static void assign_register_types(void)
|
|
{
|
|
type_register_static(&assign_info);
|
|
}
|
|
|
|
type_init(assign_register_types)
|
|
|
|
static void assigned_dev_load_option_rom(AssignedDevice *dev)
|
|
{
|
|
int size = 0;
|
|
|
|
pci_assign_dev_load_option_rom(&dev->dev, OBJECT(dev), &size,
|
|
dev->host.domain, dev->host.bus,
|
|
dev->host.slot, dev->host.function);
|
|
}
|