qemu/hw/misc/tmp105.c
Markus Armbruster d2623129a7 qom: Drop parameter @errp of object_property_add() & friends
The only way object_property_add() can fail is when a property with
the same name already exists.  Since our property names are all
hardcoded, failure is a programming error, and the appropriate way to
handle it is passing &error_abort.

Same for its variants, except for object_property_add_child(), which
additionally fails when the child already has a parent.  Parentage is
also under program control, so this is a programming error, too.

We have a bit over 500 callers.  Almost half of them pass
&error_abort, slightly fewer ignore errors, one test case handles
errors, and the remaining few callers pass them to their own callers.

The previous few commits demonstrated once again that ignoring
programming errors is a bad idea.

Of the few ones that pass on errors, several violate the Error API.
The Error ** argument must be NULL, &error_abort, &error_fatal, or a
pointer to a variable containing NULL.  Passing an argument of the
latter kind twice without clearing it in between is wrong: if the
first call sets an error, it no longer points to NULL for the second
call.  ich9_pm_add_properties(), sparc32_ledma_realize(),
sparc32_dma_realize(), xilinx_axidma_realize(), xilinx_enet_realize()
are wrong that way.

When the one appropriate choice of argument is &error_abort, letting
users pick the argument is a bad idea.

Drop parameter @errp and assert the preconditions instead.

There's one exception to "duplicate property name is a programming
error": the way object_property_add() implements the magic (and
undocumented) "automatic arrayification".  Don't drop @errp there.
Instead, rename object_property_add() to object_property_try_add(),
and add the obvious wrapper object_property_add().

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200505152926.18877-15-armbru@redhat.com>
[Two semantic rebase conflicts resolved]
2020-05-15 07:07:58 +02:00

277 lines
7.0 KiB
C

/*
* Texas Instruments TMP105 temperature sensor.
*
* Copyright (C) 2008 Nokia Corporation
* Written by Andrzej Zaborowski <andrew@openedhand.com>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 or
* (at your option) version 3 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, see <http://www.gnu.org/licenses/>.
*/
#include "qemu/osdep.h"
#include "hw/i2c/i2c.h"
#include "hw/irq.h"
#include "migration/vmstate.h"
#include "tmp105.h"
#include "qapi/error.h"
#include "qapi/visitor.h"
#include "qemu/module.h"
static void tmp105_interrupt_update(TMP105State *s)
{
qemu_set_irq(s->pin, s->alarm ^ ((~s->config >> 2) & 1)); /* POL */
}
static void tmp105_alarm_update(TMP105State *s)
{
if ((s->config >> 0) & 1) { /* SD */
if ((s->config >> 7) & 1) /* OS */
s->config &= ~(1 << 7); /* OS */
else
return;
}
if ((s->config >> 1) & 1) { /* TM */
if (s->temperature >= s->limit[1])
s->alarm = 1;
else if (s->temperature < s->limit[0])
s->alarm = 1;
} else {
if (s->temperature >= s->limit[1])
s->alarm = 1;
else if (s->temperature < s->limit[0])
s->alarm = 0;
}
tmp105_interrupt_update(s);
}
static void tmp105_get_temperature(Object *obj, Visitor *v, const char *name,
void *opaque, Error **errp)
{
TMP105State *s = TMP105(obj);
int64_t value = s->temperature * 1000 / 256;
visit_type_int(v, name, &value, errp);
}
/* Units are 0.001 centigrades relative to 0 C. s->temperature is 8.8
* fixed point, so units are 1/256 centigrades. A simple ratio will do.
*/
static void tmp105_set_temperature(Object *obj, Visitor *v, const char *name,
void *opaque, Error **errp)
{
TMP105State *s = TMP105(obj);
Error *local_err = NULL;
int64_t temp;
visit_type_int(v, name, &temp, &local_err);
if (local_err) {
error_propagate(errp, local_err);
return;
}
if (temp >= 128000 || temp < -128000) {
error_setg(errp, "value %" PRId64 ".%03" PRIu64 " C is out of range",
temp / 1000, temp % 1000);
return;
}
s->temperature = (int16_t) (temp * 256 / 1000);
tmp105_alarm_update(s);
}
static const int tmp105_faultq[4] = { 1, 2, 4, 6 };
static void tmp105_read(TMP105State *s)
{
s->len = 0;
if ((s->config >> 1) & 1) { /* TM */
s->alarm = 0;
tmp105_interrupt_update(s);
}
switch (s->pointer & 3) {
case TMP105_REG_TEMPERATURE:
s->buf[s->len ++] = (((uint16_t) s->temperature) >> 8);
s->buf[s->len ++] = (((uint16_t) s->temperature) >> 0) &
(0xf0 << ((~s->config >> 5) & 3)); /* R */
break;
case TMP105_REG_CONFIG:
s->buf[s->len ++] = s->config;
break;
case TMP105_REG_T_LOW:
s->buf[s->len ++] = ((uint16_t) s->limit[0]) >> 8;
s->buf[s->len ++] = ((uint16_t) s->limit[0]) >> 0;
break;
case TMP105_REG_T_HIGH:
s->buf[s->len ++] = ((uint16_t) s->limit[1]) >> 8;
s->buf[s->len ++] = ((uint16_t) s->limit[1]) >> 0;
break;
}
}
static void tmp105_write(TMP105State *s)
{
switch (s->pointer & 3) {
case TMP105_REG_TEMPERATURE:
break;
case TMP105_REG_CONFIG:
if (s->buf[0] & ~s->config & (1 << 0)) /* SD */
printf("%s: TMP105 shutdown\n", __func__);
s->config = s->buf[0];
s->faults = tmp105_faultq[(s->config >> 3) & 3]; /* F */
tmp105_alarm_update(s);
break;
case TMP105_REG_T_LOW:
case TMP105_REG_T_HIGH:
if (s->len >= 3)
s->limit[s->pointer & 1] = (int16_t)
((((uint16_t) s->buf[0]) << 8) | s->buf[1]);
tmp105_alarm_update(s);
break;
}
}
static uint8_t tmp105_rx(I2CSlave *i2c)
{
TMP105State *s = TMP105(i2c);
if (s->len < 2) {
return s->buf[s->len ++];
} else {
return 0xff;
}
}
static int tmp105_tx(I2CSlave *i2c, uint8_t data)
{
TMP105State *s = TMP105(i2c);
if (s->len == 0) {
s->pointer = data;
s->len++;
} else {
if (s->len <= 2) {
s->buf[s->len - 1] = data;
}
s->len++;
tmp105_write(s);
}
return 0;
}
static int tmp105_event(I2CSlave *i2c, enum i2c_event event)
{
TMP105State *s = TMP105(i2c);
if (event == I2C_START_RECV) {
tmp105_read(s);
}
s->len = 0;
return 0;
}
static int tmp105_post_load(void *opaque, int version_id)
{
TMP105State *s = opaque;
s->faults = tmp105_faultq[(s->config >> 3) & 3]; /* F */
tmp105_interrupt_update(s);
return 0;
}
static const VMStateDescription vmstate_tmp105 = {
.name = "TMP105",
.version_id = 0,
.minimum_version_id = 0,
.post_load = tmp105_post_load,
.fields = (VMStateField[]) {
VMSTATE_UINT8(len, TMP105State),
VMSTATE_UINT8_ARRAY(buf, TMP105State, 2),
VMSTATE_UINT8(pointer, TMP105State),
VMSTATE_UINT8(config, TMP105State),
VMSTATE_INT16(temperature, TMP105State),
VMSTATE_INT16_ARRAY(limit, TMP105State, 2),
VMSTATE_UINT8(alarm, TMP105State),
VMSTATE_I2C_SLAVE(i2c, TMP105State),
VMSTATE_END_OF_LIST()
}
};
static void tmp105_reset(I2CSlave *i2c)
{
TMP105State *s = TMP105(i2c);
s->temperature = 0;
s->pointer = 0;
s->config = 0;
s->faults = tmp105_faultq[(s->config >> 3) & 3];
s->alarm = 0;
tmp105_interrupt_update(s);
}
static void tmp105_realize(DeviceState *dev, Error **errp)
{
I2CSlave *i2c = I2C_SLAVE(dev);
TMP105State *s = TMP105(i2c);
qdev_init_gpio_out(&i2c->qdev, &s->pin, 1);
tmp105_reset(&s->i2c);
}
static void tmp105_initfn(Object *obj)
{
object_property_add(obj, "temperature", "int",
tmp105_get_temperature,
tmp105_set_temperature, NULL, NULL);
}
static void tmp105_class_init(ObjectClass *klass, void *data)
{
DeviceClass *dc = DEVICE_CLASS(klass);
I2CSlaveClass *k = I2C_SLAVE_CLASS(klass);
dc->realize = tmp105_realize;
k->event = tmp105_event;
k->recv = tmp105_rx;
k->send = tmp105_tx;
dc->vmsd = &vmstate_tmp105;
}
static const TypeInfo tmp105_info = {
.name = TYPE_TMP105,
.parent = TYPE_I2C_SLAVE,
.instance_size = sizeof(TMP105State),
.instance_init = tmp105_initfn,
.class_init = tmp105_class_init,
};
static void tmp105_register_types(void)
{
type_register_static(&tmp105_info);
}
type_init(tmp105_register_types)