.. |
allwinner-a10.c
|
hw/sd/allwinner-sdhost: Use AddressSpace for DMA transfers
|
2020-08-28 10:02:45 +01:00 |
allwinner-h3.c
|
target-arm queue:
|
2020-08-28 15:14:40 +01:00 |
armsse.c
|
target-arm queue:
|
2020-08-28 15:14:40 +01:00 |
armv7m.c
|
error: Eliminate error_propagate() with Coccinelle, part 1
|
2020-07-10 15:18:08 +02:00 |
aspeed_ast2600.c
|
hw/arm/aspeed: Map the UART5 device unconditionally
|
2020-09-18 09:04:36 +02:00 |
aspeed_soc.c
|
hw/arm/aspeed: Map the UART5 device unconditionally
|
2020-09-18 09:04:36 +02:00 |
aspeed.c
|
hw/arm/aspeed: Add machine properties to define the flash models
|
2020-09-18 09:04:36 +02:00 |
bcm2835_peripherals.c
|
error: Eliminate error_propagate() with Coccinelle, part 1
|
2020-07-10 15:18:08 +02:00 |
bcm2836.c
|
error: Eliminate error_propagate() with Coccinelle, part 1
|
2020-07-10 15:18:08 +02:00 |
boot.c
|
hw/arm/boot: Fix MTE for EL3 direct kernel boot
|
2020-07-27 16:12:10 +01:00 |
collie.c
|
Use OBJECT_DECLARE_SIMPLE_TYPE when possible
|
2020-09-18 14:12:32 -04:00 |
cubieboard.c
|
qom: Use returned bool to check for failure, Coccinelle part
|
2020-07-10 15:18:08 +02:00 |
digic_boards.c
|
qdev: Use returned bool to check for qdev_realize() etc. failure
|
2020-07-10 15:01:06 +02:00 |
digic.c
|
error: Eliminate error_propagate() with Coccinelle, part 1
|
2020-07-10 15:18:08 +02:00 |
exynos4_boards.c
|
sysbus: Convert qdev_set_parent_bus() use with Coccinelle, part 1
|
2020-06-15 22:06:04 +02:00 |
exynos4210.c
|
qom: Put name parameter before value / visitor parameter
|
2020-07-10 15:18:08 +02:00 |
fsl-imx6.c
|
Add the ability to change the FEC PHY MDIO device number on i.MX6 processor
|
2020-07-13 14:36:08 +01:00 |
fsl-imx6ul.c
|
qom: Put name parameter before value / visitor parameter
|
2020-07-10 15:18:08 +02:00 |
fsl-imx7.c
|
Add the ability to change the FEC PHY MDIO devices numbers on i.MX7 processor
|
2020-07-13 14:36:08 +01:00 |
fsl-imx25.c
|
Add the ability to change the FEC PHY MDIO device number on i.MX25 processor
|
2020-07-13 14:36:07 +01:00 |
fsl-imx31.c
|
error: Eliminate error_propagate() with Coccinelle, part 1
|
2020-07-10 15:18:08 +02:00 |
gumstix.c
|
hw/arm/gumstix: Simplify since the machines are little-endian only
|
2020-03-05 16:09:14 +00:00 |
highbank.c
|
Use OBJECT_DECLARE_SIMPLE_TYPE when possible
|
2020-09-18 14:12:32 -04:00 |
imx25_pdk.c
|
qdev: Make qdev_prop_set_drive() match the other helpers
|
2020-06-23 16:07:07 +02:00 |
integratorcp.c
|
Use OBJECT_DECLARE_SIMPLE_TYPE when possible
|
2020-09-18 14:12:32 -04:00 |
Kconfig
|
hw/ssi: NPCM7xx Flash Interface Unit device model
|
2020-09-14 14:24:59 +01:00 |
kzm.c
|
qdev: Convert bus-less devices to qdev_realize() with Coccinelle
|
2020-06-15 22:06:04 +02:00 |
mainstone.c
|
hw/arm: Use memory_region_init_rom() with read-only regions
|
2020-03-17 15:18:46 +01:00 |
mcimx6ul-evk.c
|
qom: Put name parameter before value / visitor parameter
|
2020-07-10 15:18:08 +02:00 |
mcimx7d-sabre.c
|
qdev: Make qdev_prop_set_drive() match the other helpers
|
2020-06-23 16:07:07 +02:00 |
meson.build
|
hw/arm: Add two NPCM7xx-based machines
|
2020-09-14 14:24:58 +01:00 |
microbit.c
|
Use OBJECT_DECLARE_SIMPLE_TYPE when possible
|
2020-09-18 14:12:32 -04:00 |
mps2-tz.c
|
Use OBJECT_DECLARE_TYPE when possible
|
2020-09-18 14:12:32 -04:00 |
mps2.c
|
Use OBJECT_DECLARE_TYPE when possible
|
2020-09-18 14:12:32 -04:00 |
msf2-soc.c
|
msf2-soc, stellaris: Don't wire up SYSRESETREQ
|
2020-08-03 17:55:03 +01:00 |
msf2-som.c
|
qdev: Make qdev_prop_set_drive() match the other helpers
|
2020-06-23 16:07:07 +02:00 |
musca.c
|
Use OBJECT_DECLARE_TYPE when possible
|
2020-09-18 14:12:32 -04:00 |
musicpal.c
|
Use OBJECT_DECLARE_SIMPLE_TYPE when possible
|
2020-09-18 14:12:32 -04:00 |
netduino2.c
|
hw/arm/netduino2, netduinoplus2: Set system_clock_scale
|
2020-08-03 17:55:03 +01:00 |
netduinoplus2.c
|
hw/arm/netduino2, netduinoplus2: Set system_clock_scale
|
2020-08-03 17:55:03 +01:00 |
npcm7xx_boards.c
|
hw/arm: Wire up BMC boot flash for npcm750-evb and quanta-gsj
|
2020-09-14 14:24:59 +01:00 |
npcm7xx.c
|
hw/arm/npcm7xx: add board setup stub for CPU and UART clocks
|
2020-09-14 14:24:59 +01:00 |
nrf51_soc.c
|
hw/arm/nrf51_soc: Set system_clock_scale
|
2020-08-03 17:55:31 +01:00 |
nseries.c
|
hw/i2c: Rename i2c_create_slave() as i2c_slave_create_simple()
|
2020-07-16 12:30:54 -05:00 |
omap1.c
|
hw/arm/omap1:Remove redundant statement in omap_clkdsp_read()
|
2020-09-01 11:53:44 +02:00 |
omap2.c
|
sysbus: Convert to sysbus_realize() etc. with Coccinelle
|
2020-06-15 22:05:28 +02:00 |
omap_sx1.c
|
hw/arm: Use memory_region_init_rom() with read-only regions
|
2020-03-17 15:18:46 +01:00 |
orangepi.c
|
allwinner-h3: Rename memmap enum constants
|
2020-08-27 14:04:54 -04:00 |
palm.c
|
Use OBJECT_DECLARE_SIMPLE_TYPE when possible
|
2020-09-18 14:12:32 -04:00 |
pxa2xx_gpio.c
|
Use OBJECT_DECLARE_SIMPLE_TYPE when possible
|
2020-09-18 14:12:32 -04:00 |
pxa2xx_pic.c
|
Use OBJECT_DECLARE_SIMPLE_TYPE when possible
|
2020-09-18 14:12:32 -04:00 |
pxa2xx.c
|
Use OBJECT_DECLARE_SIMPLE_TYPE when possible
|
2020-09-18 14:12:32 -04:00 |
raspi.c
|
Use DECLARE_*CHECKER* macros
|
2020-09-09 09:27:09 -04:00 |
realview.c
|
hw/sd/pl181: Do not create SD card within the SD host controller
|
2020-08-21 16:22:43 +02:00 |
sabrelite.c
|
qdev: Make qdev_prop_set_drive() match the other helpers
|
2020-06-23 16:07:07 +02:00 |
sbsa-ref.c
|
Use OBJECT_DECLARE_SIMPLE_TYPE when possible
|
2020-09-18 14:12:32 -04:00 |
smmu-common.c
|
hw/arm/smmuv3: Support HAD and advertise SMMUv3.1 support
|
2020-08-24 10:02:06 +01:00 |
smmu-internal.h
|
hw/arm/smmu-common: Manage IOTLB block entries
|
2020-08-24 10:02:06 +01:00 |
smmuv3-internal.h
|
hw/arm/smmuv3: Advertise SMMUv3.2 range invalidation
|
2020-08-24 10:02:06 +01:00 |
smmuv3.c
|
hw/arm/smmuv3: Advertise SMMUv3.2 range invalidation
|
2020-08-24 10:02:06 +01:00 |
spitz.c
|
Use OBJECT_DECLARE_SIMPLE_TYPE when possible
|
2020-09-18 14:12:32 -04:00 |
stellaris.c
|
Use OBJECT_DECLARE_SIMPLE_TYPE when possible
|
2020-09-18 14:12:32 -04:00 |
stm32f205_soc.c
|
error: Eliminate error_propagate() with Coccinelle, part 1
|
2020-07-10 15:18:08 +02:00 |
stm32f405_soc.c
|
error: Eliminate error_propagate() with Coccinelle, part 1
|
2020-07-10 15:18:08 +02:00 |
strongarm.c
|
Use OBJECT_DECLARE_SIMPLE_TYPE when possible
|
2020-09-18 14:12:32 -04:00 |
strongarm.h
|
hw/arm/collie: Create the RAM in the board
|
2019-10-22 17:44:01 +01:00 |
sysbus-fdt.c
|
hw/arm/virt: vTPM support
|
2020-03-05 12:18:16 -05:00 |
tosa.c
|
Use OBJECT_DECLARE_SIMPLE_TYPE when possible
|
2020-09-18 14:12:32 -04:00 |
trace-events
|
hw/arm/smmuv3: Support HAD and advertise SMMUv3.1 support
|
2020-08-24 10:02:06 +01:00 |
trace.h
|
trace: switch position of headers to what Meson requires
|
2020-08-21 06:18:24 -04:00 |
versatilepb.c
|
Use OBJECT_DECLARE_SIMPLE_TYPE when possible
|
2020-09-18 14:12:32 -04:00 |
vexpress.c
|
Use OBJECT_DECLARE_TYPE when possible
|
2020-09-18 14:12:32 -04:00 |
virt-acpi-build.c
|
acpi: move acpi_dsdt_add_power_button() to ged
|
2020-09-17 14:16:19 +02:00 |
virt.c
|
hw: add compat machines for 5.2
|
2020-08-19 10:45:48 -04:00 |
xilinx_zynq.c
|
Use OBJECT_DECLARE_SIMPLE_TYPE when possible
|
2020-09-18 14:12:32 -04:00 |
xlnx-versal-virt.c
|
Use OBJECT_DECLARE_SIMPLE_TYPE when possible
|
2020-09-18 14:12:32 -04:00 |
xlnx-versal.c
|
hw/arm: xlnx: Set all boards' GEM 'phy-addr' property value to 23
|
2020-09-09 15:54:18 -07:00 |
xlnx-zcu102.c
|
Use OBJECT_DECLARE_SIMPLE_TYPE when possible
|
2020-09-18 14:12:32 -04:00 |
xlnx-zynqmp.c
|
hw/arm: xlnx: Set all boards' GEM 'phy-addr' property value to 23
|
2020-09-09 15:54:18 -07:00 |
z2.c
|
Use OBJECT_DECLARE_SIMPLE_TYPE when possible
|
2020-09-18 14:12:32 -04:00 |