e6b3c8ca02
Correct the condition determining whether we instantiate the onboard
NIC or a PCI card NIC on VersatilePB and Realview boards. This was broken
in two ways:
(1) if the user asked for two default NICs ("-net nic -net nic") we would
crash trying to strcmp() a NULL pointer
(2) if the user asked for two NICs explicitly of the same model as the
onboard NIC (eg "-net nic,model=smc91c111 -net nic,model=smc91c111")
we would try to instantiate two onboard NICs at the same address.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
469 lines
14 KiB
C
469 lines
14 KiB
C
/*
|
|
* ARM RealView Baseboard System emulation.
|
|
*
|
|
* Copyright (c) 2006-2007 CodeSourcery.
|
|
* Written by Paul Brook
|
|
*
|
|
* This code is licenced under the GPL.
|
|
*/
|
|
|
|
#include "sysbus.h"
|
|
#include "arm-misc.h"
|
|
#include "primecell.h"
|
|
#include "devices.h"
|
|
#include "pci.h"
|
|
#include "usb-ohci.h"
|
|
#include "net.h"
|
|
#include "sysemu.h"
|
|
#include "boards.h"
|
|
#include "bitbang_i2c.h"
|
|
#include "sysbus.h"
|
|
#include "blockdev.h"
|
|
|
|
#define SMP_BOOT_ADDR 0xe0000000
|
|
|
|
typedef struct {
|
|
SysBusDevice busdev;
|
|
bitbang_i2c_interface *bitbang;
|
|
int out;
|
|
int in;
|
|
} RealViewI2CState;
|
|
|
|
static uint32_t realview_i2c_read(void *opaque, target_phys_addr_t offset)
|
|
{
|
|
RealViewI2CState *s = (RealViewI2CState *)opaque;
|
|
|
|
if (offset == 0) {
|
|
return (s->out & 1) | (s->in << 1);
|
|
} else {
|
|
hw_error("realview_i2c_read: Bad offset 0x%x\n", (int)offset);
|
|
return -1;
|
|
}
|
|
}
|
|
|
|
static void realview_i2c_write(void *opaque, target_phys_addr_t offset,
|
|
uint32_t value)
|
|
{
|
|
RealViewI2CState *s = (RealViewI2CState *)opaque;
|
|
|
|
switch (offset) {
|
|
case 0:
|
|
s->out |= value & 3;
|
|
break;
|
|
case 4:
|
|
s->out &= ~value;
|
|
break;
|
|
default:
|
|
hw_error("realview_i2c_write: Bad offset 0x%x\n", (int)offset);
|
|
}
|
|
bitbang_i2c_set(s->bitbang, BITBANG_I2C_SCL, (s->out & 1) != 0);
|
|
s->in = bitbang_i2c_set(s->bitbang, BITBANG_I2C_SDA, (s->out & 2) != 0);
|
|
}
|
|
|
|
static CPUReadMemoryFunc * const realview_i2c_readfn[] = {
|
|
realview_i2c_read,
|
|
realview_i2c_read,
|
|
realview_i2c_read
|
|
};
|
|
|
|
static CPUWriteMemoryFunc * const realview_i2c_writefn[] = {
|
|
realview_i2c_write,
|
|
realview_i2c_write,
|
|
realview_i2c_write
|
|
};
|
|
|
|
static int realview_i2c_init(SysBusDevice *dev)
|
|
{
|
|
RealViewI2CState *s = FROM_SYSBUS(RealViewI2CState, dev);
|
|
i2c_bus *bus;
|
|
int iomemtype;
|
|
|
|
bus = i2c_init_bus(&dev->qdev, "i2c");
|
|
s->bitbang = bitbang_i2c_init(bus);
|
|
iomemtype = cpu_register_io_memory(realview_i2c_readfn,
|
|
realview_i2c_writefn, s,
|
|
DEVICE_NATIVE_ENDIAN);
|
|
sysbus_init_mmio(dev, 0x1000, iomemtype);
|
|
return 0;
|
|
}
|
|
|
|
static SysBusDeviceInfo realview_i2c_info = {
|
|
.init = realview_i2c_init,
|
|
.qdev.name = "realview_i2c",
|
|
.qdev.size = sizeof(RealViewI2CState),
|
|
};
|
|
|
|
static void realview_register_devices(void)
|
|
{
|
|
sysbus_register_withprop(&realview_i2c_info);
|
|
}
|
|
|
|
/* Board init. */
|
|
|
|
static struct arm_boot_info realview_binfo = {
|
|
.smp_loader_start = SMP_BOOT_ADDR,
|
|
};
|
|
|
|
/* The following two lists must be consistent. */
|
|
enum realview_board_type {
|
|
BOARD_EB,
|
|
BOARD_EB_MPCORE,
|
|
BOARD_PB_A8,
|
|
BOARD_PBX_A9,
|
|
};
|
|
|
|
static const int realview_board_id[] = {
|
|
0x33b,
|
|
0x33b,
|
|
0x769,
|
|
0x76d
|
|
};
|
|
|
|
static void realview_init(ram_addr_t ram_size,
|
|
const char *boot_device,
|
|
const char *kernel_filename, const char *kernel_cmdline,
|
|
const char *initrd_filename, const char *cpu_model,
|
|
enum realview_board_type board_type)
|
|
{
|
|
CPUState *env = NULL;
|
|
ram_addr_t ram_offset;
|
|
DeviceState *dev, *sysctl, *gpio2;
|
|
SysBusDevice *busdev;
|
|
qemu_irq *irqp;
|
|
qemu_irq pic[64];
|
|
qemu_irq mmc_irq[2];
|
|
PCIBus *pci_bus;
|
|
NICInfo *nd;
|
|
i2c_bus *i2c;
|
|
int n;
|
|
int done_nic = 0;
|
|
qemu_irq cpu_irq[4];
|
|
int is_mpcore = 0;
|
|
int is_pb = 0;
|
|
uint32_t proc_id = 0;
|
|
uint32_t sys_id;
|
|
ram_addr_t low_ram_size;
|
|
|
|
switch (board_type) {
|
|
case BOARD_EB:
|
|
break;
|
|
case BOARD_EB_MPCORE:
|
|
is_mpcore = 1;
|
|
break;
|
|
case BOARD_PB_A8:
|
|
is_pb = 1;
|
|
break;
|
|
case BOARD_PBX_A9:
|
|
is_mpcore = 1;
|
|
is_pb = 1;
|
|
break;
|
|
}
|
|
for (n = 0; n < smp_cpus; n++) {
|
|
env = cpu_init(cpu_model);
|
|
if (!env) {
|
|
fprintf(stderr, "Unable to find CPU definition\n");
|
|
exit(1);
|
|
}
|
|
irqp = arm_pic_init_cpu(env);
|
|
cpu_irq[n] = irqp[ARM_PIC_CPU_IRQ];
|
|
}
|
|
if (arm_feature(env, ARM_FEATURE_V7)) {
|
|
if (is_mpcore) {
|
|
proc_id = 0x0c000000;
|
|
} else {
|
|
proc_id = 0x0e000000;
|
|
}
|
|
} else if (arm_feature(env, ARM_FEATURE_V6K)) {
|
|
proc_id = 0x06000000;
|
|
} else if (arm_feature(env, ARM_FEATURE_V6)) {
|
|
proc_id = 0x04000000;
|
|
} else {
|
|
proc_id = 0x02000000;
|
|
}
|
|
|
|
if (is_pb && ram_size > 0x20000000) {
|
|
/* Core tile RAM. */
|
|
low_ram_size = ram_size - 0x20000000;
|
|
ram_size = 0x20000000;
|
|
ram_offset = qemu_ram_alloc(NULL, "realview.lowmem", low_ram_size);
|
|
cpu_register_physical_memory(0x20000000, low_ram_size,
|
|
ram_offset | IO_MEM_RAM);
|
|
}
|
|
|
|
ram_offset = qemu_ram_alloc(NULL, "realview.highmem", ram_size);
|
|
low_ram_size = ram_size;
|
|
if (low_ram_size > 0x10000000)
|
|
low_ram_size = 0x10000000;
|
|
/* SDRAM at address zero. */
|
|
cpu_register_physical_memory(0, low_ram_size, ram_offset | IO_MEM_RAM);
|
|
if (is_pb) {
|
|
/* And again at a high address. */
|
|
cpu_register_physical_memory(0x70000000, ram_size,
|
|
ram_offset | IO_MEM_RAM);
|
|
} else {
|
|
ram_size = low_ram_size;
|
|
}
|
|
|
|
sys_id = is_pb ? 0x01780500 : 0xc1400400;
|
|
sysctl = qdev_create(NULL, "realview_sysctl");
|
|
qdev_prop_set_uint32(sysctl, "sys_id", sys_id);
|
|
qdev_init_nofail(sysctl);
|
|
qdev_prop_set_uint32(sysctl, "proc_id", proc_id);
|
|
sysbus_mmio_map(sysbus_from_qdev(sysctl), 0, 0x10000000);
|
|
|
|
if (is_mpcore) {
|
|
dev = qdev_create(NULL, is_pb ? "a9mpcore_priv": "realview_mpcore");
|
|
qdev_prop_set_uint32(dev, "num-cpu", smp_cpus);
|
|
qdev_init_nofail(dev);
|
|
busdev = sysbus_from_qdev(dev);
|
|
if (is_pb) {
|
|
realview_binfo.smp_priv_base = 0x1f000000;
|
|
} else {
|
|
realview_binfo.smp_priv_base = 0x10100000;
|
|
}
|
|
sysbus_mmio_map(busdev, 0, realview_binfo.smp_priv_base);
|
|
for (n = 0; n < smp_cpus; n++) {
|
|
sysbus_connect_irq(busdev, n, cpu_irq[n]);
|
|
}
|
|
} else {
|
|
uint32_t gic_addr = is_pb ? 0x1e000000 : 0x10040000;
|
|
/* For now just create the nIRQ GIC, and ignore the others. */
|
|
dev = sysbus_create_simple("realview_gic", gic_addr, cpu_irq[0]);
|
|
}
|
|
for (n = 0; n < 64; n++) {
|
|
pic[n] = qdev_get_gpio_in(dev, n);
|
|
}
|
|
|
|
sysbus_create_simple("pl050_keyboard", 0x10006000, pic[20]);
|
|
sysbus_create_simple("pl050_mouse", 0x10007000, pic[21]);
|
|
|
|
sysbus_create_simple("pl011", 0x10009000, pic[12]);
|
|
sysbus_create_simple("pl011", 0x1000a000, pic[13]);
|
|
sysbus_create_simple("pl011", 0x1000b000, pic[14]);
|
|
sysbus_create_simple("pl011", 0x1000c000, pic[15]);
|
|
|
|
/* DMA controller is optional, apparently. */
|
|
sysbus_create_simple("pl081", 0x10030000, pic[24]);
|
|
|
|
sysbus_create_simple("sp804", 0x10011000, pic[4]);
|
|
sysbus_create_simple("sp804", 0x10012000, pic[5]);
|
|
|
|
sysbus_create_simple("pl061", 0x10013000, pic[6]);
|
|
sysbus_create_simple("pl061", 0x10014000, pic[7]);
|
|
gpio2 = sysbus_create_simple("pl061", 0x10015000, pic[8]);
|
|
|
|
sysbus_create_simple("pl110_versatile", 0x10020000, pic[23]);
|
|
|
|
dev = sysbus_create_varargs("pl181", 0x10005000, pic[17], pic[18], NULL);
|
|
/* Wire up MMC card detect and read-only signals. These have
|
|
* to go to both the PL061 GPIO and the sysctl register.
|
|
* Note that the PL181 orders these lines (readonly,inserted)
|
|
* and the PL061 has them the other way about. Also the card
|
|
* detect line is inverted.
|
|
*/
|
|
mmc_irq[0] = qemu_irq_split(
|
|
qdev_get_gpio_in(sysctl, ARM_SYSCTL_GPIO_MMC_WPROT),
|
|
qdev_get_gpio_in(gpio2, 1));
|
|
mmc_irq[1] = qemu_irq_split(
|
|
qdev_get_gpio_in(sysctl, ARM_SYSCTL_GPIO_MMC_CARDIN),
|
|
qemu_irq_invert(qdev_get_gpio_in(gpio2, 0)));
|
|
qdev_connect_gpio_out(dev, 0, mmc_irq[0]);
|
|
qdev_connect_gpio_out(dev, 1, mmc_irq[1]);
|
|
|
|
sysbus_create_simple("pl031", 0x10017000, pic[10]);
|
|
|
|
if (!is_pb) {
|
|
dev = sysbus_create_varargs("realview_pci", 0x60000000,
|
|
pic[48], pic[49], pic[50], pic[51], NULL);
|
|
pci_bus = (PCIBus *)qdev_get_child_bus(dev, "pci");
|
|
if (usb_enabled) {
|
|
usb_ohci_init_pci(pci_bus, -1);
|
|
}
|
|
n = drive_get_max_bus(IF_SCSI);
|
|
while (n >= 0) {
|
|
pci_create_simple(pci_bus, -1, "lsi53c895a");
|
|
n--;
|
|
}
|
|
}
|
|
for(n = 0; n < nb_nics; n++) {
|
|
nd = &nd_table[n];
|
|
|
|
if (!done_nic && (!nd->model ||
|
|
strcmp(nd->model, is_pb ? "lan9118" : "smc91c111") == 0)) {
|
|
if (is_pb) {
|
|
lan9118_init(nd, 0x4e000000, pic[28]);
|
|
} else {
|
|
smc91c111_init(nd, 0x4e000000, pic[28]);
|
|
}
|
|
done_nic = 1;
|
|
} else {
|
|
pci_nic_init_nofail(nd, "rtl8139", NULL);
|
|
}
|
|
}
|
|
|
|
dev = sysbus_create_simple("realview_i2c", 0x10002000, NULL);
|
|
i2c = (i2c_bus *)qdev_get_child_bus(dev, "i2c");
|
|
i2c_create_slave(i2c, "ds1338", 0x68);
|
|
|
|
/* Memory map for RealView Emulation Baseboard: */
|
|
/* 0x10000000 System registers. */
|
|
/* 0x10001000 System controller. */
|
|
/* 0x10002000 Two-Wire Serial Bus. */
|
|
/* 0x10003000 Reserved. */
|
|
/* 0x10004000 AACI. */
|
|
/* 0x10005000 MCI. */
|
|
/* 0x10006000 KMI0. */
|
|
/* 0x10007000 KMI1. */
|
|
/* 0x10008000 Character LCD. (EB) */
|
|
/* 0x10009000 UART0. */
|
|
/* 0x1000a000 UART1. */
|
|
/* 0x1000b000 UART2. */
|
|
/* 0x1000c000 UART3. */
|
|
/* 0x1000d000 SSPI. */
|
|
/* 0x1000e000 SCI. */
|
|
/* 0x1000f000 Reserved. */
|
|
/* 0x10010000 Watchdog. */
|
|
/* 0x10011000 Timer 0+1. */
|
|
/* 0x10012000 Timer 2+3. */
|
|
/* 0x10013000 GPIO 0. */
|
|
/* 0x10014000 GPIO 1. */
|
|
/* 0x10015000 GPIO 2. */
|
|
/* 0x10002000 Two-Wire Serial Bus - DVI. (PB) */
|
|
/* 0x10017000 RTC. */
|
|
/* 0x10018000 DMC. */
|
|
/* 0x10019000 PCI controller config. */
|
|
/* 0x10020000 CLCD. */
|
|
/* 0x10030000 DMA Controller. */
|
|
/* 0x10040000 GIC1. (EB) */
|
|
/* 0x10050000 GIC2. (EB) */
|
|
/* 0x10060000 GIC3. (EB) */
|
|
/* 0x10070000 GIC4. (EB) */
|
|
/* 0x10080000 SMC. */
|
|
/* 0x1e000000 GIC1. (PB) */
|
|
/* 0x1e001000 GIC2. (PB) */
|
|
/* 0x1e002000 GIC3. (PB) */
|
|
/* 0x1e003000 GIC4. (PB) */
|
|
/* 0x40000000 NOR flash. */
|
|
/* 0x44000000 DoC flash. */
|
|
/* 0x48000000 SRAM. */
|
|
/* 0x4c000000 Configuration flash. */
|
|
/* 0x4e000000 Ethernet. */
|
|
/* 0x4f000000 USB. */
|
|
/* 0x50000000 PISMO. */
|
|
/* 0x54000000 PISMO. */
|
|
/* 0x58000000 PISMO. */
|
|
/* 0x5c000000 PISMO. */
|
|
/* 0x60000000 PCI. */
|
|
/* 0x61000000 PCI Self Config. */
|
|
/* 0x62000000 PCI Config. */
|
|
/* 0x63000000 PCI IO. */
|
|
/* 0x64000000 PCI mem 0. */
|
|
/* 0x68000000 PCI mem 1. */
|
|
/* 0x6c000000 PCI mem 2. */
|
|
|
|
/* ??? Hack to map an additional page of ram for the secondary CPU
|
|
startup code. I guess this works on real hardware because the
|
|
BootROM happens to be in ROM/flash or in memory that isn't clobbered
|
|
until after Linux boots the secondary CPUs. */
|
|
ram_offset = qemu_ram_alloc(NULL, "realview.hack", 0x1000);
|
|
cpu_register_physical_memory(SMP_BOOT_ADDR, 0x1000,
|
|
ram_offset | IO_MEM_RAM);
|
|
|
|
realview_binfo.ram_size = ram_size;
|
|
realview_binfo.kernel_filename = kernel_filename;
|
|
realview_binfo.kernel_cmdline = kernel_cmdline;
|
|
realview_binfo.initrd_filename = initrd_filename;
|
|
realview_binfo.nb_cpus = smp_cpus;
|
|
realview_binfo.board_id = realview_board_id[board_type];
|
|
realview_binfo.loader_start = (board_type == BOARD_PB_A8 ? 0x70000000 : 0);
|
|
arm_load_kernel(first_cpu, &realview_binfo);
|
|
}
|
|
|
|
static void realview_eb_init(ram_addr_t ram_size,
|
|
const char *boot_device,
|
|
const char *kernel_filename, const char *kernel_cmdline,
|
|
const char *initrd_filename, const char *cpu_model)
|
|
{
|
|
if (!cpu_model) {
|
|
cpu_model = "arm926";
|
|
}
|
|
realview_init(ram_size, boot_device, kernel_filename, kernel_cmdline,
|
|
initrd_filename, cpu_model, BOARD_EB);
|
|
}
|
|
|
|
static void realview_eb_mpcore_init(ram_addr_t ram_size,
|
|
const char *boot_device,
|
|
const char *kernel_filename, const char *kernel_cmdline,
|
|
const char *initrd_filename, const char *cpu_model)
|
|
{
|
|
if (!cpu_model) {
|
|
cpu_model = "arm11mpcore";
|
|
}
|
|
realview_init(ram_size, boot_device, kernel_filename, kernel_cmdline,
|
|
initrd_filename, cpu_model, BOARD_EB_MPCORE);
|
|
}
|
|
|
|
static void realview_pb_a8_init(ram_addr_t ram_size,
|
|
const char *boot_device,
|
|
const char *kernel_filename, const char *kernel_cmdline,
|
|
const char *initrd_filename, const char *cpu_model)
|
|
{
|
|
if (!cpu_model) {
|
|
cpu_model = "cortex-a8";
|
|
}
|
|
realview_init(ram_size, boot_device, kernel_filename, kernel_cmdline,
|
|
initrd_filename, cpu_model, BOARD_PB_A8);
|
|
}
|
|
|
|
static void realview_pbx_a9_init(ram_addr_t ram_size,
|
|
const char *boot_device,
|
|
const char *kernel_filename, const char *kernel_cmdline,
|
|
const char *initrd_filename, const char *cpu_model)
|
|
{
|
|
if (!cpu_model) {
|
|
cpu_model = "cortex-a9";
|
|
}
|
|
realview_init(ram_size, boot_device, kernel_filename, kernel_cmdline,
|
|
initrd_filename, cpu_model, BOARD_PBX_A9);
|
|
}
|
|
|
|
static QEMUMachine realview_eb_machine = {
|
|
.name = "realview-eb",
|
|
.desc = "ARM RealView Emulation Baseboard (ARM926EJ-S)",
|
|
.init = realview_eb_init,
|
|
.use_scsi = 1,
|
|
};
|
|
|
|
static QEMUMachine realview_eb_mpcore_machine = {
|
|
.name = "realview-eb-mpcore",
|
|
.desc = "ARM RealView Emulation Baseboard (ARM11MPCore)",
|
|
.init = realview_eb_mpcore_init,
|
|
.use_scsi = 1,
|
|
.max_cpus = 4,
|
|
};
|
|
|
|
static QEMUMachine realview_pb_a8_machine = {
|
|
.name = "realview-pb-a8",
|
|
.desc = "ARM RealView Platform Baseboard for Cortex-A8",
|
|
.init = realview_pb_a8_init,
|
|
};
|
|
|
|
static QEMUMachine realview_pbx_a9_machine = {
|
|
.name = "realview-pbx-a9",
|
|
.desc = "ARM RealView Platform Baseboard Explore for Cortex-A9",
|
|
.init = realview_pbx_a9_init,
|
|
.use_scsi = 1,
|
|
.max_cpus = 4,
|
|
};
|
|
|
|
static void realview_machine_init(void)
|
|
{
|
|
qemu_register_machine(&realview_eb_machine);
|
|
qemu_register_machine(&realview_eb_mpcore_machine);
|
|
qemu_register_machine(&realview_pb_a8_machine);
|
|
qemu_register_machine(&realview_pbx_a9_machine);
|
|
}
|
|
|
|
machine_init(realview_machine_init);
|
|
device_init(realview_register_devices)
|