qemu/include/hw/s390x/sclp.h
Collin Walling fabdada935 s390: guest support for diagnose 0x318
DIAGNOSE 0x318 (diag318) is an s390 instruction that allows the storage
of diagnostic information that is collected by the firmware in the case
of hardware/firmware service events.

QEMU handles the instruction by storing the info in the CPU state. A
subsequent register sync will communicate the data to the hypervisor.

QEMU handles the migration via a VM State Description.

This feature depends on the Extended-Length SCCB (els) feature. If
els is not present, then a warning will be printed and the SCLP bit
that allows the Linux kernel to execute the instruction will not be
set.

Availability of this instruction is determined by byte 134 (aka fac134)
bit 0 of the SCLP Read Info block. This coincidentally expands into the
space used for CPU entries, which means VMs running with the diag318
capability may not be able to read information regarding all CPUs
unless the guest kernel supports an extended-length SCCB.

This feature is not supported in protected virtualization mode.

Signed-off-by: Collin Walling <walling@linux.ibm.com>
Acked-by: Janosch Frank <frankja@linux.ibm.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Message-Id: <20200915194416.107460-9-walling@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2020-10-02 13:52:49 +02:00

233 lines
7.5 KiB
C

/*
* SCLP Support
*
* Copyright IBM, Corp. 2012
*
* Authors:
* Christian Borntraeger <borntraeger@de.ibm.com>
*
* This work is licensed under the terms of the GNU GPL, version 2 or (at your
* option) any later version. See the COPYING file in the top-level directory.
*
*/
#ifndef HW_S390_SCLP_H
#define HW_S390_SCLP_H
#include "hw/sysbus.h"
#include "target/s390x/cpu-qom.h"
#include "qom/object.h"
#define SCLP_CMD_CODE_MASK 0xffff00ff
/* SCLP command codes */
#define SCLP_CMDW_READ_SCP_INFO 0x00020001
#define SCLP_CMDW_READ_SCP_INFO_FORCED 0x00120001
#define SCLP_READ_STORAGE_ELEMENT_INFO 0x00040001
#define SCLP_ATTACH_STORAGE_ELEMENT 0x00080001
#define SCLP_ASSIGN_STORAGE 0x000D0001
#define SCLP_UNASSIGN_STORAGE 0x000C0001
#define SCLP_CMD_READ_EVENT_DATA 0x00770005
#define SCLP_CMD_WRITE_EVENT_DATA 0x00760005
#define SCLP_CMD_WRITE_EVENT_MASK 0x00780005
/* SCLP Memory hotplug codes */
#define SCLP_FC_ASSIGN_ATTACH_READ_STOR 0xE00000000000ULL
#define SCLP_STARTING_SUBINCREMENT_ID 0x10001
#define SCLP_INCREMENT_UNIT 0x10000
#define MAX_STORAGE_INCREMENTS 1020
/* CPU hotplug SCLP codes */
#define SCLP_HAS_CPU_INFO 0x0C00000000000000ULL
#define SCLP_CMDW_READ_CPU_INFO 0x00010001
#define SCLP_CMDW_CONFIGURE_CPU 0x00110001
#define SCLP_CMDW_DECONFIGURE_CPU 0x00100001
/* SCLP PCI codes */
#define SCLP_HAS_IOA_RECONFIG 0x0000000040000000ULL
#define SCLP_CMDW_CONFIGURE_IOA 0x001a0001
#define SCLP_CMDW_DECONFIGURE_IOA 0x001b0001
#define SCLP_RECONFIG_PCI_ATYPE 2
/* SCLP response codes */
#define SCLP_RC_NORMAL_READ_COMPLETION 0x0010
#define SCLP_RC_NORMAL_COMPLETION 0x0020
#define SCLP_RC_SCCB_BOUNDARY_VIOLATION 0x0100
#define SCLP_RC_NO_ACTION_REQUIRED 0x0120
#define SCLP_RC_INVALID_SCLP_COMMAND 0x01f0
#define SCLP_RC_CONTAINED_EQUIPMENT_CHECK 0x0340
#define SCLP_RC_INSUFFICIENT_SCCB_LENGTH 0x0300
#define SCLP_RC_STANDBY_READ_COMPLETION 0x0410
#define SCLP_RC_ADAPTER_IN_RESERVED_STATE 0x05f0
#define SCLP_RC_ADAPTER_TYPE_NOT_RECOGNIZED 0x06f0
#define SCLP_RC_ADAPTER_ID_NOT_RECOGNIZED 0x09f0
#define SCLP_RC_INVALID_FUNCTION 0x40f0
#define SCLP_RC_NO_EVENT_BUFFERS_STORED 0x60f0
#define SCLP_RC_INVALID_SELECTION_MASK 0x70f0
#define SCLP_RC_INCONSISTENT_LENGTHS 0x72f0
#define SCLP_RC_EVENT_BUFFER_SYNTAX_ERROR 0x73f0
#define SCLP_RC_INVALID_MASK_LENGTH 0x74f0
/* Service Call Control Block (SCCB) and its elements */
#define SCCB_SIZE 4096
#define SCLP_VARIABLE_LENGTH_RESPONSE 0x80
#define SCLP_EVENT_BUFFER_ACCEPTED 0x80
#define SCLP_FC_NORMAL_WRITE 0
/*
* Normally packed structures are not the right thing to do, since all code
* must take care of endianness. We cannot use ldl_phys and friends for two
* reasons, though:
* - some of the embedded structures below the SCCB can appear multiple times
* at different locations, so there is no fixed offset
* - we work on a private copy of the SCCB, since there are several length
* fields, that would cause a security nightmare if we allow the guest to
* alter the structure while we parse it. We cannot use ldl_p and friends
* either without doing pointer arithmetics
* So we have to double check that all users of sclp data structures use the
* right endianness wrappers.
*/
typedef struct SCCBHeader {
uint16_t length;
uint8_t function_code;
uint8_t control_mask[3];
uint16_t response_code;
} QEMU_PACKED SCCBHeader;
#define SCCB_DATA_LEN (SCCB_SIZE - sizeof(SCCBHeader))
#define SCCB_CPU_FEATURE_LEN 6
/* CPU information */
typedef struct CPUEntry {
uint8_t address;
uint8_t reserved0;
uint8_t features[SCCB_CPU_FEATURE_LEN];
uint8_t reserved2[6];
uint8_t type;
uint8_t reserved1;
} QEMU_PACKED CPUEntry;
#define SCLP_READ_SCP_INFO_FIXED_CPU_OFFSET 128
typedef struct ReadInfo {
SCCBHeader h;
uint16_t rnmax;
uint8_t rnsize;
uint8_t _reserved1[16 - 11]; /* 11-15 */
uint16_t entries_cpu; /* 16-17 */
uint16_t offset_cpu; /* 18-19 */
uint8_t _reserved2[24 - 20]; /* 20-23 */
uint8_t loadparm[8]; /* 24-31 */
uint8_t _reserved3[48 - 32]; /* 32-47 */
uint64_t facilities; /* 48-55 */
uint8_t _reserved0[76 - 56]; /* 56-75 */
uint32_t ibc_val;
uint8_t conf_char[99 - 80]; /* 80-98 */
uint8_t mha_pow;
uint32_t rnsize2;
uint64_t rnmax2;
uint8_t _reserved6[116 - 112]; /* 112-115 */
uint8_t conf_char_ext[120 - 116]; /* 116-119 */
uint16_t highest_cpu;
uint8_t _reserved5[124 - 122]; /* 122-123 */
uint32_t hmfai;
uint8_t _reserved7[134 - 128]; /* 128-133 */
uint8_t fac134;
uint8_t _reserved8[144 - 135]; /* 135-143 */
struct CPUEntry entries[];
/*
* When the Extended-Length SCCB (ELS) feature is enabled the
* start of the entries field begins at an offset denoted by the
* offset_cpu field, otherwise it's at an offset of 128.
*/
} QEMU_PACKED ReadInfo;
typedef struct ReadCpuInfo {
SCCBHeader h;
uint16_t nr_configured; /* 8-9 */
uint16_t offset_configured; /* 10-11 */
uint16_t nr_standby; /* 12-13 */
uint16_t offset_standby; /* 14-15 */
uint8_t reserved0[24-16]; /* 16-23 */
struct CPUEntry entries[];
} QEMU_PACKED ReadCpuInfo;
typedef struct ReadStorageElementInfo {
SCCBHeader h;
uint16_t max_id;
uint16_t assigned;
uint16_t standby;
uint8_t _reserved0[16 - 14]; /* 14-15 */
uint32_t entries[];
} QEMU_PACKED ReadStorageElementInfo;
typedef struct AttachStorageElement {
SCCBHeader h;
uint8_t _reserved0[10 - 8]; /* 8-9 */
uint16_t assigned;
uint8_t _reserved1[16 - 12]; /* 12-15 */
uint32_t entries[];
} QEMU_PACKED AttachStorageElement;
typedef struct AssignStorage {
SCCBHeader h;
uint16_t rn;
} QEMU_PACKED AssignStorage;
typedef struct IoaCfgSccb {
SCCBHeader header;
uint8_t atype;
uint8_t reserved1;
uint16_t reserved2;
uint32_t aid;
} QEMU_PACKED IoaCfgSccb;
typedef struct SCCB {
SCCBHeader h;
char data[];
} QEMU_PACKED SCCB;
#define TYPE_SCLP "sclp"
OBJECT_DECLARE_TYPE(SCLPDevice, SCLPDeviceClass,
SCLP)
struct SCLPEventFacility;
struct SCLPDevice {
/* private */
DeviceState parent_obj;
struct SCLPEventFacility *event_facility;
int increment_size;
/* public */
};
struct SCLPDeviceClass {
/* private */
DeviceClass parent_class;
void (*read_SCP_info)(SCLPDevice *sclp, SCCB *sccb);
void (*read_cpu_info)(SCLPDevice *sclp, SCCB *sccb);
/* public */
void (*execute)(SCLPDevice *sclp, SCCB *sccb, uint32_t code);
void (*service_interrupt)(SCLPDevice *sclp, uint32_t sccb);
};
static inline int sccb_data_len(SCCB *sccb)
{
return be16_to_cpu(sccb->h.length) - sizeof(sccb->h);
}
void s390_sclp_init(void);
void sclp_service_interrupt(uint32_t sccb);
void raise_irq_cpu_hotplug(void);
int sclp_service_call(CPUS390XState *env, uint64_t sccb, uint32_t code);
int sclp_service_call_protected(CPUS390XState *env, uint64_t sccb,
uint32_t code);
#endif