qemu/target/arm/translate.h
Lluís Vilanova 2316922420 target/arm: [tcg] Port to generic translation framework
Tested-by: Emilio G. Cota <cota@braap.org>
Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Message-Id: <150002631325.22386.10348327185029496649.stgit@frigg.lan>
Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-09-06 08:06:48 -07:00

179 lines
6.0 KiB
C

#ifndef TARGET_ARM_TRANSLATE_H
#define TARGET_ARM_TRANSLATE_H
#include "exec/translator.h"
/* internal defines */
typedef struct DisasContext {
DisasContextBase base;
target_ulong pc;
target_ulong next_page_start;
uint32_t insn;
/* Nonzero if this instruction has been conditionally skipped. */
int condjmp;
/* The label that will be jumped to when the instruction is skipped. */
TCGLabel *condlabel;
/* Thumb-2 conditional execution bits. */
int condexec_mask;
int condexec_cond;
int thumb;
int sctlr_b;
TCGMemOp be_data;
#if !defined(CONFIG_USER_ONLY)
int user;
#endif
ARMMMUIdx mmu_idx; /* MMU index to use for normal loads/stores */
bool tbi0; /* TBI0 for EL0/1 or TBI for EL2/3 */
bool tbi1; /* TBI1 for EL0/1, not used for EL2/3 */
bool ns; /* Use non-secure CPREG bank on access */
int fp_excp_el; /* FP exception EL or 0 if enabled */
/* Flag indicating that exceptions from secure mode are routed to EL3. */
bool secure_routed_to_el3;
bool vfp_enabled; /* FP enabled via FPSCR.EN */
int vec_len;
int vec_stride;
bool v7m_handler_mode;
/* Immediate value in AArch32 SVC insn; must be set if is_jmp == DISAS_SWI
* so that top level loop can generate correct syndrome information.
*/
uint32_t svc_imm;
int aarch64;
int current_el;
GHashTable *cp_regs;
uint64_t features; /* CPU features bits */
/* Because unallocated encodings generate different exception syndrome
* information from traps due to FP being disabled, we can't do a single
* "is fp access disabled" check at a high level in the decode tree.
* To help in catching bugs where the access check was forgotten in some
* code path, we set this flag when the access check is done, and assert
* that it is set at the point where we actually touch the FP regs.
*/
bool fp_access_checked;
/* ARMv8 single-step state (this is distinct from the QEMU gdbstub
* single-step support).
*/
bool ss_active;
bool pstate_ss;
/* True if the insn just emitted was a load-exclusive instruction
* (necessary for syndrome information for single step exceptions),
* ie A64 LDX*, LDAX*, A32/T32 LDREX*, LDAEX*.
*/
bool is_ldex;
/* True if a single-step exception will be taken to the current EL */
bool ss_same_el;
/* Bottom two bits of XScale c15_cpar coprocessor access control reg */
int c15_cpar;
/* TCG op index of the current insn_start. */
int insn_start_idx;
#define TMP_A64_MAX 16
int tmp_a64_count;
TCGv_i64 tmp_a64[TMP_A64_MAX];
} DisasContext;
typedef struct DisasCompare {
TCGCond cond;
TCGv_i32 value;
bool value_global;
} DisasCompare;
/* Share the TCG temporaries common between 32 and 64 bit modes. */
extern TCGv_env cpu_env;
extern TCGv_i32 cpu_NF, cpu_ZF, cpu_CF, cpu_VF;
extern TCGv_i64 cpu_exclusive_addr;
extern TCGv_i64 cpu_exclusive_val;
static inline int arm_dc_feature(DisasContext *dc, int feature)
{
return (dc->features & (1ULL << feature)) != 0;
}
static inline int get_mem_index(DisasContext *s)
{
return arm_to_core_mmu_idx(s->mmu_idx);
}
/* Function used to determine the target exception EL when otherwise not known
* or default.
*/
static inline int default_exception_el(DisasContext *s)
{
/* If we are coming from secure EL0 in a system with a 32-bit EL3, then
* there is no secure EL1, so we route exceptions to EL3. Otherwise,
* exceptions can only be routed to ELs above 1, so we target the higher of
* 1 or the current EL.
*/
return (s->mmu_idx == ARMMMUIdx_S1SE0 && s->secure_routed_to_el3)
? 3 : MAX(1, s->current_el);
}
static void disas_set_insn_syndrome(DisasContext *s, uint32_t syn)
{
/* We don't need to save all of the syndrome so we mask and shift
* out unneeded bits to help the sleb128 encoder do a better job.
*/
syn &= ARM_INSN_START_WORD2_MASK;
syn >>= ARM_INSN_START_WORD2_SHIFT;
/* We check and clear insn_start_idx to catch multiple updates. */
assert(s->insn_start_idx != 0);
tcg_set_insn_param(s->insn_start_idx, 2, syn);
s->insn_start_idx = 0;
}
/* is_jmp field values */
#define DISAS_JUMP DISAS_TARGET_0 /* only pc was modified dynamically */
#define DISAS_UPDATE DISAS_TARGET_1 /* cpu state was modified dynamically */
/* These instructions trap after executing, so the A32/T32 decoder must
* defer them until after the conditional execution state has been updated.
* WFI also needs special handling when single-stepping.
*/
#define DISAS_WFI DISAS_TARGET_2
#define DISAS_SWI DISAS_TARGET_3
/* WFE */
#define DISAS_WFE DISAS_TARGET_4
#define DISAS_HVC DISAS_TARGET_5
#define DISAS_SMC DISAS_TARGET_6
#define DISAS_YIELD DISAS_TARGET_7
/* M profile branch which might be an exception return (and so needs
* custom end-of-TB code)
*/
#define DISAS_BX_EXCRET DISAS_TARGET_8
/* For instructions which want an immediate exit to the main loop,
* as opposed to attempting to use lookup_and_goto_ptr. Unlike
* DISAS_UPDATE this doesn't write the PC on exiting the translation
* loop so you need to ensure something (gen_a64_set_pc_im or runtime
* helper) has done so before we reach return from cpu_tb_exec.
*/
#define DISAS_EXIT DISAS_TARGET_9
#ifdef TARGET_AARCH64
void a64_translate_init(void);
void gen_a64_set_pc_im(uint64_t val);
void aarch64_cpu_dump_state(CPUState *cs, FILE *f,
fprintf_function cpu_fprintf, int flags);
extern const TranslatorOps aarch64_translator_ops;
#else
static inline void a64_translate_init(void)
{
}
static inline void gen_a64_set_pc_im(uint64_t val)
{
}
static inline void aarch64_cpu_dump_state(CPUState *cs, FILE *f,
fprintf_function cpu_fprintf,
int flags)
{
}
#endif
void arm_test_cc(DisasCompare *cmp, int cc);
void arm_free_cc(DisasCompare *cmp);
void arm_jump_cc(DisasCompare *cmp, TCGLabel *label);
void arm_gen_test_cc(int cc, TCGLabel *label);
#endif /* TARGET_ARM_TRANSLATE_H */