mirrors/qemu
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
6bbd5dde9a
qemu/hw/virtio-net.h
Jesse Larrew 32ab06bcf1 hw/virtio-net: disable multiqueue by default 
The new multiqueue feature adds fields to the virtio device config, which
breaks Windows guests. Disable the feature by default until the Windows
drivers are fixed.

Signed-off-by: Jesse Larrew <jlarrew@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-08 11:14:19 -06:00

197 lines
7.8 KiB
C
Raw Blame History

/*
* Virtio Network Device
*
* Copyright IBM, Corp. 2007
*
* Authors:
* Anthony Liguori <aliguori@us.ibm.com>
*
* This work is licensed under the terms of the GNU GPL, version 2. See
* the COPYING file in the top-level directory.
*
*/
#ifndef _QEMU_VIRTIO_NET_H
#define _QEMU_VIRTIO_NET_H
#include "virtio.h"
#include "pci/pci.h"
#define ETH_ALEN 6
/* from Linux's virtio_net.h */
/* The ID for virtio_net */
#define VIRTIO_ID_NET 1
/* The feature bitmap for virtio net */
#define VIRTIO_NET_F_CSUM 0 /* Host handles pkts w/ partial csum */
#define VIRTIO_NET_F_GUEST_CSUM 1 /* Guest handles pkts w/ partial csum */
#define VIRTIO_NET_F_MAC 5 /* Host has given MAC address. */
#define VIRTIO_NET_F_GSO 6 /* Host handles pkts w/ any GSO type */
#define VIRTIO_NET_F_GUEST_TSO4 7 /* Guest can handle TSOv4 in. */
#define VIRTIO_NET_F_GUEST_TSO6 8 /* Guest can handle TSOv6 in. */
#define VIRTIO_NET_F_GUEST_ECN 9 /* Guest can handle TSO[6] w/ ECN in. */
#define VIRTIO_NET_F_GUEST_UFO 10 /* Guest can handle UFO in. */
#define VIRTIO_NET_F_HOST_TSO4 11 /* Host can handle TSOv4 in. */
#define VIRTIO_NET_F_HOST_TSO6 12 /* Host can handle TSOv6 in. */
#define VIRTIO_NET_F_HOST_ECN 13 /* Host can handle TSO[6] w/ ECN in. */
#define VIRTIO_NET_F_HOST_UFO 14 /* Host can handle UFO in. */
#define VIRTIO_NET_F_MRG_RXBUF 15 /* Host can merge receive buffers. */
#define VIRTIO_NET_F_STATUS 16 /* virtio_net_config.status available */
#define VIRTIO_NET_F_CTRL_VQ 17 /* Control channel available */
#define VIRTIO_NET_F_CTRL_RX 18 /* Control channel RX mode support */
#define VIRTIO_NET_F_CTRL_VLAN 19 /* Control channel VLAN filtering */
#define VIRTIO_NET_F_CTRL_RX_EXTRA 20 /* Extra RX mode control support */
#define VIRTIO_NET_F_MQ 22 /* Device supports Receive Flow
* Steering */
#define VIRTIO_NET_F_CTRL_MAC_ADDR 23 /* Set MAC address */
#define VIRTIO_NET_S_LINK_UP 1 /* Link is up */
#define TX_TIMER_INTERVAL 150000 /* 150 us */
/* Limit the number of packets that can be sent via a single flush
* of the TX queue. This gives us a guaranteed exit condition and
* ensures fairness in the io path. 256 conveniently matches the
* length of the TX queue and shows a good balance of performance
* and latency. */
#define TX_BURST 256
typedef struct virtio_net_conf
{
uint32_t txtimer;
int32_t txburst;
char *tx;
} virtio_net_conf;
/* Maximum packet size we can receive from tap device: header + 64k */
#define VIRTIO_NET_MAX_BUFSIZE (sizeof(struct virtio_net_hdr) + (64 << 10))
struct virtio_net_config
{
/* The config defining mac address ($ETH_ALEN bytes) */
uint8_t mac[ETH_ALEN];
/* See VIRTIO_NET_F_STATUS and VIRTIO_NET_S_* above */
uint16_t status;
/* Max virtqueue pairs supported by the device */
uint16_t max_virtqueue_pairs;
} QEMU_PACKED;
/*
* Control virtqueue data structures
*
* The control virtqueue expects a header in the first sg entry
* and an ack/status response in the last entry. Data for the
* command goes in between.
*/
struct virtio_net_ctrl_hdr {
uint8_t class;
uint8_t cmd;
};
typedef uint8_t virtio_net_ctrl_ack;
#define VIRTIO_NET_OK 0
#define VIRTIO_NET_ERR 1
/*
* Control the RX mode, ie. promisucous, allmulti, etc...
* All commands require an "out" sg entry containing a 1 byte
* state value, zero = disable, non-zero = enable. Commands
* 0 and 1 are supported with the VIRTIO_NET_F_CTRL_RX feature.
* Commands 2-5 are added with VIRTIO_NET_F_CTRL_RX_EXTRA.
*/
#define VIRTIO_NET_CTRL_RX 0
#define VIRTIO_NET_CTRL_RX_PROMISC 0
#define VIRTIO_NET_CTRL_RX_ALLMULTI 1
#define VIRTIO_NET_CTRL_RX_ALLUNI 2
#define VIRTIO_NET_CTRL_RX_NOMULTI 3
#define VIRTIO_NET_CTRL_RX_NOUNI 4
#define VIRTIO_NET_CTRL_RX_NOBCAST 5
/*
* Control the MAC
*
* The MAC filter table is managed by the hypervisor, the guest should
* assume the size is infinite. Filtering should be considered
* non-perfect, ie. based on hypervisor resources, the guest may
* received packets from sources not specified in the filter list.
*
* In addition to the class/cmd header, the TABLE_SET command requires
* two out scatterlists. Each contains a 4 byte count of entries followed
* by a concatenated byte stream of the ETH_ALEN MAC addresses. The
* first sg list contains unicast addresses, the second is for multicast.
* This functionality is present if the VIRTIO_NET_F_CTRL_RX feature
* is available.
*
* The ADDR_SET command requests one out scatterlist, it contains a
* 6 bytes MAC address. This functionality is present if the
* VIRTIO_NET_F_CTRL_MAC_ADDR feature is available.
*/
struct virtio_net_ctrl_mac {
uint32_t entries;
uint8_t macs[][ETH_ALEN];
};
#define VIRTIO_NET_CTRL_MAC 1
#define VIRTIO_NET_CTRL_MAC_TABLE_SET 0
#define VIRTIO_NET_CTRL_MAC_ADDR_SET 1
/*
* Control VLAN filtering
*
* The VLAN filter table is controlled via a simple ADD/DEL interface.
* VLAN IDs not added may be filterd by the hypervisor. Del is the
* opposite of add. Both commands expect an out entry containing a 2
* byte VLAN ID. VLAN filterting is available with the
* VIRTIO_NET_F_CTRL_VLAN feature bit.
*/
#define VIRTIO_NET_CTRL_VLAN 2
#define VIRTIO_NET_CTRL_VLAN_ADD 0
#define VIRTIO_NET_CTRL_VLAN_DEL 1
/*
* Control Multiqueue
*
* The command VIRTIO_NET_CTRL_MQ_VQ_PAIRS_SET
* enables multiqueue, specifying the number of the transmit and
* receive queues that will be used. After the command is consumed and acked by
* the device, the device will not steer new packets on receive virtqueues
* other than specified nor read from transmit virtqueues other than specified.
* Accordingly, driver should not transmit new packets on virtqueues other than
* specified.
*/
struct virtio_net_ctrl_mq {
uint16_t virtqueue_pairs;
};
#define VIRTIO_NET_CTRL_MQ 4
#define VIRTIO_NET_CTRL_MQ_VQ_PAIRS_SET 0
#define VIRTIO_NET_CTRL_MQ_VQ_PAIRS_MIN 1
#define VIRTIO_NET_CTRL_MQ_VQ_PAIRS_MAX 0x8000
#define DEFINE_VIRTIO_NET_FEATURES(_state, _field) \
DEFINE_VIRTIO_COMMON_FEATURES(_state, _field), \
DEFINE_PROP_BIT("csum", _state, _field, VIRTIO_NET_F_CSUM, true), \
DEFINE_PROP_BIT("guest_csum", _state, _field, VIRTIO_NET_F_GUEST_CSUM, true), \
DEFINE_PROP_BIT("gso", _state, _field, VIRTIO_NET_F_GSO, true), \
DEFINE_PROP_BIT("guest_tso4", _state, _field, VIRTIO_NET_F_GUEST_TSO4, true), \
DEFINE_PROP_BIT("guest_tso6", _state, _field, VIRTIO_NET_F_GUEST_TSO6, true), \
DEFINE_PROP_BIT("guest_ecn", _state, _field, VIRTIO_NET_F_GUEST_ECN, true), \
DEFINE_PROP_BIT("guest_ufo", _state, _field, VIRTIO_NET_F_GUEST_UFO, true), \
DEFINE_PROP_BIT("host_tso4", _state, _field, VIRTIO_NET_F_HOST_TSO4, true), \
DEFINE_PROP_BIT("host_tso6", _state, _field, VIRTIO_NET_F_HOST_TSO6, true), \
DEFINE_PROP_BIT("host_ecn", _state, _field, VIRTIO_NET_F_HOST_ECN, true), \
DEFINE_PROP_BIT("host_ufo", _state, _field, VIRTIO_NET_F_HOST_UFO, true), \
DEFINE_PROP_BIT("mrg_rxbuf", _state, _field, VIRTIO_NET_F_MRG_RXBUF, true), \
DEFINE_PROP_BIT("status", _state, _field, VIRTIO_NET_F_STATUS, true), \
DEFINE_PROP_BIT("ctrl_vq", _state, _field, VIRTIO_NET_F_CTRL_VQ, true), \
DEFINE_PROP_BIT("ctrl_rx", _state, _field, VIRTIO_NET_F_CTRL_RX, true), \
DEFINE_PROP_BIT("ctrl_vlan", _state, _field, VIRTIO_NET_F_CTRL_VLAN, true), \
DEFINE_PROP_BIT("ctrl_rx_extra", _state, _field, VIRTIO_NET_F_CTRL_RX_EXTRA, true), \
DEFINE_PROP_BIT("ctrl_mac_addr", _state, _field, VIRTIO_NET_F_CTRL_MAC_ADDR, true), \
DEFINE_PROP_BIT("mq", _state, _field, VIRTIO_NET_F_MQ, false)
#endif
Reference in New Issue View Git Blame Copy Permalink