mirrors/qemu
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
6b504a01c1
qemu/hw/char/parallel.c
Richard Henderson 2f6cab053f hw/char: Constify VMState 
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20231221031652.119827-26-richard.henderson@linaro.org>
2023-12-29 11:17:30 +11:00

643 lines
20 KiB
C
Raw Blame History

/*
* QEMU Parallel PORT emulation
*
* Copyright (c) 2003-2005 Fabrice Bellard
* Copyright (c) 2007 Marko Kohtala
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#include "qemu/osdep.h"
#include "qapi/error.h"
#include "qemu/module.h"
#include "chardev/char-parallel.h"
#include "hw/acpi/acpi_aml_interface.h"
#include "hw/qdev-properties.h"
#include "hw/qdev-properties-system.h"
#include "migration/vmstate.h"
#include "hw/char/parallel-isa.h"
#include "hw/char/parallel.h"
#include "sysemu/reset.h"
#include "sysemu/sysemu.h"
#include "trace.h"
#include "qom/object.h"
//#define DEBUG_PARALLEL
#ifdef DEBUG_PARALLEL
#define pdebug(fmt, ...) printf("pp: " fmt, ## __VA_ARGS__)
#else
#define pdebug(fmt, ...) ((void)0)
#endif
#define PARA_REG_DATA 0
#define PARA_REG_STS 1
#define PARA_REG_CTR 2
#define PARA_REG_EPP_ADDR 3
#define PARA_REG_EPP_DATA 4
/*
* These are the definitions for the Printer Status Register
*/
#define PARA_STS_BUSY 0x80 /* Busy complement */
#define PARA_STS_ACK 0x40 /* Acknowledge */
#define PARA_STS_PAPER 0x20 /* Out of paper */
#define PARA_STS_ONLINE 0x10 /* Online */
#define PARA_STS_ERROR 0x08 /* Error complement */
#define PARA_STS_TMOUT 0x01 /* EPP timeout */
/*
* These are the definitions for the Printer Control Register
*/
#define PARA_CTR_DIR 0x20 /* Direction (1=read, 0=write) */
#define PARA_CTR_INTEN 0x10 /* IRQ Enable */
#define PARA_CTR_SELECT 0x08 /* Select In complement */
#define PARA_CTR_INIT 0x04 /* Initialize Printer complement */
#define PARA_CTR_AUTOLF 0x02 /* Auto linefeed complement */
#define PARA_CTR_STROBE 0x01 /* Strobe complement */
#define PARA_CTR_SIGNAL (PARA_CTR_SELECT|PARA_CTR_INIT|PARA_CTR_AUTOLF|PARA_CTR_STROBE)
static void parallel_update_irq(ParallelState *s)
{
if (s->irq_pending)
qemu_irq_raise(s->irq);
else
qemu_irq_lower(s->irq);
}
static void
parallel_ioport_write_sw(void *opaque, uint32_t addr, uint32_t val)
{
ParallelState *s = opaque;
addr &= 7;
trace_parallel_ioport_write("SW", addr, val);
switch(addr) {
case PARA_REG_DATA:
s->dataw = val;
parallel_update_irq(s);
break;
case PARA_REG_CTR:
val |= 0xc0;
if ((val & PARA_CTR_INIT) == 0 ) {
s->status = PARA_STS_BUSY;
s->status |= PARA_STS_ACK;
s->status |= PARA_STS_ONLINE;
s->status |= PARA_STS_ERROR;
}
else if (val & PARA_CTR_SELECT) {
if (val & PARA_CTR_STROBE) {
s->status &= ~PARA_STS_BUSY;
if ((s->control & PARA_CTR_STROBE) == 0)
/* XXX this blocks entire thread. Rewrite to use
* qemu_chr_fe_write and background I/O callbacks */
qemu_chr_fe_write_all(&s->chr, &s->dataw, 1);
} else {
if (s->control & PARA_CTR_INTEN) {
s->irq_pending = 1;
}
}
}
parallel_update_irq(s);
s->control = val;
break;
}
}
static void parallel_ioport_write_hw(void *opaque, uint32_t addr, uint32_t val)
{
ParallelState *s = opaque;
uint8_t parm = val;
int dir;
/* Sometimes programs do several writes for timing purposes on old
HW. Take care not to waste time on writes that do nothing. */
s->last_read_offset = ~0U;
addr &= 7;
trace_parallel_ioport_write("HW", addr, val);
switch(addr) {
case PARA_REG_DATA:
if (s->dataw == val)
return;
pdebug("wd%02x\n", val);
qemu_chr_fe_ioctl(&s->chr, CHR_IOCTL_PP_WRITE_DATA, &parm);
s->dataw = val;
break;
case PARA_REG_STS:
pdebug("ws%02x\n", val);
if (val & PARA_STS_TMOUT)
s->epp_timeout = 0;
break;
case PARA_REG_CTR:
val |= 0xc0;
if (s->control == val)
return;
pdebug("wc%02x\n", val);
if ((val & PARA_CTR_DIR) != (s->control & PARA_CTR_DIR)) {
if (val & PARA_CTR_DIR) {
dir = 1;
} else {
dir = 0;
}
qemu_chr_fe_ioctl(&s->chr, CHR_IOCTL_PP_DATA_DIR, &dir);
parm &= ~PARA_CTR_DIR;
}
qemu_chr_fe_ioctl(&s->chr, CHR_IOCTL_PP_WRITE_CONTROL, &parm);
s->control = val;
break;
case PARA_REG_EPP_ADDR:
if ((s->control & (PARA_CTR_DIR|PARA_CTR_SIGNAL)) != PARA_CTR_INIT)
/* Controls not correct for EPP address cycle, so do nothing */
pdebug("wa%02x s\n", val);
else {
struct ParallelIOArg ioarg = { .buffer = &parm, .count = 1 };
if (qemu_chr_fe_ioctl(&s->chr,
CHR_IOCTL_PP_EPP_WRITE_ADDR, &ioarg)) {
s->epp_timeout = 1;
pdebug("wa%02x t\n", val);
}
else
pdebug("wa%02x\n", val);
}
break;
case PARA_REG_EPP_DATA:
if ((s->control & (PARA_CTR_DIR|PARA_CTR_SIGNAL)) != PARA_CTR_INIT)
/* Controls not correct for EPP data cycle, so do nothing */
pdebug("we%02x s\n", val);
else {
struct ParallelIOArg ioarg = { .buffer = &parm, .count = 1 };
if (qemu_chr_fe_ioctl(&s->chr, CHR_IOCTL_PP_EPP_WRITE, &ioarg)) {
s->epp_timeout = 1;
pdebug("we%02x t\n", val);
}
else
pdebug("we%02x\n", val);
}
break;
}
}
static void
parallel_ioport_eppdata_write_hw2(void *opaque, uint32_t addr, uint32_t val)
{
ParallelState *s = opaque;
uint16_t eppdata = cpu_to_le16(val);
int err;
struct ParallelIOArg ioarg = {
.buffer = &eppdata, .count = sizeof(eppdata)
};
trace_parallel_ioport_write("EPP", addr, val);
if ((s->control & (PARA_CTR_DIR|PARA_CTR_SIGNAL)) != PARA_CTR_INIT) {
/* Controls not correct for EPP data cycle, so do nothing */
pdebug("we%04x s\n", val);
return;
}
err = qemu_chr_fe_ioctl(&s->chr, CHR_IOCTL_PP_EPP_WRITE, &ioarg);
if (err) {
s->epp_timeout = 1;
pdebug("we%04x t\n", val);
}
else
pdebug("we%04x\n", val);
}
static void
parallel_ioport_eppdata_write_hw4(void *opaque, uint32_t addr, uint32_t val)
{
ParallelState *s = opaque;
uint32_t eppdata = cpu_to_le32(val);
int err;
struct ParallelIOArg ioarg = {
.buffer = &eppdata, .count = sizeof(eppdata)
};
trace_parallel_ioport_write("EPP", addr, val);
if ((s->control & (PARA_CTR_DIR|PARA_CTR_SIGNAL)) != PARA_CTR_INIT) {
/* Controls not correct for EPP data cycle, so do nothing */
pdebug("we%08x s\n", val);
return;
}
err = qemu_chr_fe_ioctl(&s->chr, CHR_IOCTL_PP_EPP_WRITE, &ioarg);
if (err) {
s->epp_timeout = 1;
pdebug("we%08x t\n", val);
}
else
pdebug("we%08x\n", val);
}
static uint32_t parallel_ioport_read_sw(void *opaque, uint32_t addr)
{
ParallelState *s = opaque;
uint32_t ret = 0xff;
addr &= 7;
switch(addr) {
case PARA_REG_DATA:
if (s->control & PARA_CTR_DIR)
ret = s->datar;
else
ret = s->dataw;
break;
case PARA_REG_STS:
ret = s->status;
s->irq_pending = 0;
if ((s->status & PARA_STS_BUSY) == 0 && (s->control & PARA_CTR_STROBE) == 0) {
/* XXX Fixme: wait 5 microseconds */
if (s->status & PARA_STS_ACK)
s->status &= ~PARA_STS_ACK;
else {
/* XXX Fixme: wait 5 microseconds */
s->status |= PARA_STS_ACK;
s->status |= PARA_STS_BUSY;
}
}
parallel_update_irq(s);
break;
case PARA_REG_CTR:
ret = s->control;
break;
}
trace_parallel_ioport_read("SW", addr, ret);
return ret;
}
static uint32_t parallel_ioport_read_hw(void *opaque, uint32_t addr)
{
ParallelState *s = opaque;
uint8_t ret = 0xff;
addr &= 7;
switch(addr) {
case PARA_REG_DATA:
qemu_chr_fe_ioctl(&s->chr, CHR_IOCTL_PP_READ_DATA, &ret);
if (s->last_read_offset != addr || s->datar != ret)
pdebug("rd%02x\n", ret);
s->datar = ret;
break;
case PARA_REG_STS:
qemu_chr_fe_ioctl(&s->chr, CHR_IOCTL_PP_READ_STATUS, &ret);
ret &= ~PARA_STS_TMOUT;
if (s->epp_timeout)
ret |= PARA_STS_TMOUT;
if (s->last_read_offset != addr || s->status != ret)
pdebug("rs%02x\n", ret);
s->status = ret;
break;
case PARA_REG_CTR:
/* s->control has some bits fixed to 1. It is zero only when
it has not been yet written to. */
if (s->control == 0) {
qemu_chr_fe_ioctl(&s->chr, CHR_IOCTL_PP_READ_CONTROL, &ret);
if (s->last_read_offset != addr)
pdebug("rc%02x\n", ret);
s->control = ret;
}
else {
ret = s->control;
if (s->last_read_offset != addr)
pdebug("rc%02x\n", ret);
}
break;
case PARA_REG_EPP_ADDR:
if ((s->control & (PARA_CTR_DIR | PARA_CTR_SIGNAL)) !=
(PARA_CTR_DIR | PARA_CTR_INIT))
/* Controls not correct for EPP addr cycle, so do nothing */
pdebug("ra%02x s\n", ret);
else {
struct ParallelIOArg ioarg = { .buffer = &ret, .count = 1 };
if (qemu_chr_fe_ioctl(&s->chr,
CHR_IOCTL_PP_EPP_READ_ADDR, &ioarg)) {
s->epp_timeout = 1;
pdebug("ra%02x t\n", ret);
}
else
pdebug("ra%02x\n", ret);
}
break;
case PARA_REG_EPP_DATA:
if ((s->control & (PARA_CTR_DIR | PARA_CTR_SIGNAL)) !=
(PARA_CTR_DIR | PARA_CTR_INIT))
/* Controls not correct for EPP data cycle, so do nothing */
pdebug("re%02x s\n", ret);
else {
struct ParallelIOArg ioarg = { .buffer = &ret, .count = 1 };
if (qemu_chr_fe_ioctl(&s->chr, CHR_IOCTL_PP_EPP_READ, &ioarg)) {
s->epp_timeout = 1;
pdebug("re%02x t\n", ret);
}
else
pdebug("re%02x\n", ret);
}
break;
}
trace_parallel_ioport_read("HW", addr, ret);
s->last_read_offset = addr;
return ret;
}
static uint32_t
parallel_ioport_eppdata_read_hw2(void *opaque, uint32_t addr)
{
ParallelState *s = opaque;
uint32_t ret;
uint16_t eppdata = ~0;
int err;
struct ParallelIOArg ioarg = {
.buffer = &eppdata, .count = sizeof(eppdata)
};
if ((s->control & (PARA_CTR_DIR|PARA_CTR_SIGNAL)) != (PARA_CTR_DIR|PARA_CTR_INIT)) {
/* Controls not correct for EPP data cycle, so do nothing */
pdebug("re%04x s\n", eppdata);
return eppdata;
}
err = qemu_chr_fe_ioctl(&s->chr, CHR_IOCTL_PP_EPP_READ, &ioarg);
ret = le16_to_cpu(eppdata);
if (err) {
s->epp_timeout = 1;
pdebug("re%04x t\n", ret);
}
else
pdebug("re%04x\n", ret);
trace_parallel_ioport_read("EPP", addr, ret);
return ret;
}
static uint32_t
parallel_ioport_eppdata_read_hw4(void *opaque, uint32_t addr)
{
ParallelState *s = opaque;
uint32_t ret;
uint32_t eppdata = ~0U;
int err;
struct ParallelIOArg ioarg = {
.buffer = &eppdata, .count = sizeof(eppdata)
};
if ((s->control & (PARA_CTR_DIR|PARA_CTR_SIGNAL)) != (PARA_CTR_DIR|PARA_CTR_INIT)) {
/* Controls not correct for EPP data cycle, so do nothing */
pdebug("re%08x s\n", eppdata);
return eppdata;
}
err = qemu_chr_fe_ioctl(&s->chr, CHR_IOCTL_PP_EPP_READ, &ioarg);
ret = le32_to_cpu(eppdata);
if (err) {
s->epp_timeout = 1;
pdebug("re%08x t\n", ret);
}
else
pdebug("re%08x\n", ret);
trace_parallel_ioport_read("EPP", addr, ret);
return ret;
}
static void parallel_ioport_ecp_write(void *opaque, uint32_t addr, uint32_t val)
{
trace_parallel_ioport_write("ECP", addr & 7, val);
pdebug("wecp%d=%02x\n", addr & 7, val);
}
static uint32_t parallel_ioport_ecp_read(void *opaque, uint32_t addr)
{
uint8_t ret = 0xff;
trace_parallel_ioport_read("ECP", addr & 7, ret);
pdebug("recp%d:%02x\n", addr & 7, ret);
return ret;
}
static void parallel_reset(void *opaque)
{
ParallelState *s = opaque;
s->datar = ~0;
s->dataw = ~0;
s->status = PARA_STS_BUSY;
s->status |= PARA_STS_ACK;
s->status |= PARA_STS_ONLINE;
s->status |= PARA_STS_ERROR;
s->status |= PARA_STS_TMOUT;
s->control = PARA_CTR_SELECT;
s->control |= PARA_CTR_INIT;
s->control |= 0xc0;
s->irq_pending = 0;
s->hw_driver = 0;
s->epp_timeout = 0;
s->last_read_offset = ~0U;
}
static const int isa_parallel_io[MAX_PARALLEL_PORTS] = { 0x378, 0x278, 0x3bc };
static const MemoryRegionPortio isa_parallel_portio_hw_list[] = {
{ 0, 8, 1,
.read = parallel_ioport_read_hw,
.write = parallel_ioport_write_hw },
{ 4, 1, 2,
.read = parallel_ioport_eppdata_read_hw2,
.write = parallel_ioport_eppdata_write_hw2 },
{ 4, 1, 4,
.read = parallel_ioport_eppdata_read_hw4,
.write = parallel_ioport_eppdata_write_hw4 },
{ 0x400, 8, 1,
.read = parallel_ioport_ecp_read,
.write = parallel_ioport_ecp_write },
PORTIO_END_OF_LIST(),
};
static const MemoryRegionPortio isa_parallel_portio_sw_list[] = {
{ 0, 8, 1,
.read = parallel_ioport_read_sw,
.write = parallel_ioport_write_sw },
PORTIO_END_OF_LIST(),
};
static const VMStateDescription vmstate_parallel_isa = {
.name = "parallel_isa",
.version_id = 1,
.minimum_version_id = 1,
.fields = (const VMStateField[]) {
VMSTATE_UINT8(state.dataw, ISAParallelState),
VMSTATE_UINT8(state.datar, ISAParallelState),
VMSTATE_UINT8(state.status, ISAParallelState),
VMSTATE_UINT8(state.control, ISAParallelState),
VMSTATE_INT32(state.irq_pending, ISAParallelState),
VMSTATE_INT32(state.epp_timeout, ISAParallelState),
VMSTATE_END_OF_LIST()
}
};
static int parallel_can_receive(void *opaque)
{
return 1;
}
static void parallel_isa_realizefn(DeviceState *dev, Error **errp)
{
static int index;
ISADevice *isadev = ISA_DEVICE(dev);
ISAParallelState *isa = ISA_PARALLEL(dev);
ParallelState *s = &isa->state;
int base;
uint8_t dummy;
if (!qemu_chr_fe_backend_connected(&s->chr)) {
error_setg(errp, "Can't create parallel device, empty char device");
return;
}
if (isa->index == -1) {
isa->index = index;
}
if (isa->index >= MAX_PARALLEL_PORTS) {
error_setg(errp, "Max. supported number of parallel ports is %d.",
MAX_PARALLEL_PORTS);
return;
}
if (isa->iobase == -1) {
isa->iobase = isa_parallel_io[isa->index];
}
index++;
base = isa->iobase;
s->irq = isa_get_irq(isadev, isa->isairq);
qemu_register_reset(parallel_reset, s);
qemu_chr_fe_set_handlers(&s->chr, parallel_can_receive, NULL,
NULL, NULL, s, NULL, true);
if (qemu_chr_fe_ioctl(&s->chr, CHR_IOCTL_PP_READ_STATUS, &dummy) == 0) {
s->hw_driver = 1;
s->status = dummy;
}
isa_register_portio_list(isadev, &s->portio_list, base,
(s->hw_driver
? &isa_parallel_portio_hw_list[0]
: &isa_parallel_portio_sw_list[0]),
s, "parallel");
}
static void parallel_isa_build_aml(AcpiDevAmlIf *adev, Aml *scope)
{
ISAParallelState *isa = ISA_PARALLEL(adev);
Aml *dev;
Aml *crs;
crs = aml_resource_template();
aml_append(crs, aml_io(AML_DECODE16, isa->iobase, isa->iobase, 0x08, 0x08));
aml_append(crs, aml_irq_no_flags(isa->isairq));
dev = aml_device("LPT%d", isa->index + 1);
aml_append(dev, aml_name_decl("_HID", aml_eisaid("PNP0400")));
aml_append(dev, aml_name_decl("_UID", aml_int(isa->index + 1)));
aml_append(dev, aml_name_decl("_STA", aml_int(0xf)));
aml_append(dev, aml_name_decl("_CRS", crs));
aml_append(scope, dev);
}
/* Memory mapped interface */
static uint64_t parallel_mm_readfn(void *opaque, hwaddr addr, unsigned size)
{
ParallelState *s = opaque;
return parallel_ioport_read_sw(s, addr >> s->it_shift) &
MAKE_64BIT_MASK(0, size * 8);
}
static void parallel_mm_writefn(void *opaque, hwaddr addr,
uint64_t value, unsigned size)
{
ParallelState *s = opaque;
parallel_ioport_write_sw(s, addr >> s->it_shift,
value & MAKE_64BIT_MASK(0, size * 8));
}
static const MemoryRegionOps parallel_mm_ops = {
.read = parallel_mm_readfn,
.write = parallel_mm_writefn,
.valid.min_access_size = 1,
.valid.max_access_size = 4,
.endianness = DEVICE_NATIVE_ENDIAN,
};
/* If fd is zero, it means that the parallel device uses the console */
bool parallel_mm_init(MemoryRegion *address_space,
hwaddr base, int it_shift, qemu_irq irq,
Chardev *chr)
{
ParallelState *s;
s = g_new0(ParallelState, 1);
s->irq = irq;
qemu_chr_fe_init(&s->chr, chr, &error_abort);
s->it_shift = it_shift;
qemu_register_reset(parallel_reset, s);
memory_region_init_io(&s->iomem, NULL, &parallel_mm_ops, s,
"parallel", 8 << it_shift);
memory_region_add_subregion(address_space, base, &s->iomem);
return true;
}
static Property parallel_isa_properties[] = {
DEFINE_PROP_UINT32("index", ISAParallelState, index, -1),
DEFINE_PROP_UINT32("iobase", ISAParallelState, iobase, -1),
DEFINE_PROP_UINT32("irq", ISAParallelState, isairq, 7),
DEFINE_PROP_CHR("chardev", ISAParallelState, state.chr),
DEFINE_PROP_END_OF_LIST(),
};
static void parallel_isa_class_initfn(ObjectClass *klass, void *data)
{
DeviceClass *dc = DEVICE_CLASS(klass);
AcpiDevAmlIfClass *adevc = ACPI_DEV_AML_IF_CLASS(klass);
dc->realize = parallel_isa_realizefn;
dc->vmsd = &vmstate_parallel_isa;
adevc->build_dev_aml = parallel_isa_build_aml;
device_class_set_props(dc, parallel_isa_properties);
set_bit(DEVICE_CATEGORY_INPUT, dc->categories);
}
static const TypeInfo parallel_isa_info = {
.name = TYPE_ISA_PARALLEL,
.parent = TYPE_ISA_DEVICE,
.instance_size = sizeof(ISAParallelState),
.class_init = parallel_isa_class_initfn,
.interfaces = (InterfaceInfo[]) {
{ TYPE_ACPI_DEV_AML_IF },
{ },
},
};
static void parallel_register_types(void)
{
type_register_static(&parallel_isa_info);
}
type_init(parallel_register_types)
Reference in New Issue View Git Blame Copy Permalink