mirrors/qemu
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
69991d7dcb
qemu/hw/i2c/omap_i2c.c
Markus Armbruster 1b111dc121 hw: cannot_instantiate_with_device_add_yet due to pointer props 
Pointer properties can be set only by code, not by device_add.  A
device with a pointer property can work with device_add only when the
property may remain null.

This is the case for property "interrupt_vector" of device
"etraxfs,pic".  Add a comment there.

Set cannot_instantiate_with_device_add_yet for the other devices with
pointer properties, with a comment explaining why.

Juha Riihimäki and Peter Maydell deserve my thanks for making "pointer
property must not remain null" blatantly obvious in the OMAP devices.

Only device "smbus-eeprom" is actually changed.  The others are all
sysbus devices, which get cannot_instantiate_with_device_add_yet set
in their abstract base's class init function.  Setting it again in
their class init function is technically redundant, but serves as
insurance for when sysbus devices become available with device_add,
and as documentation.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@gmail.com> (for ETRAX)
Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-12-24 17:27:17 +01:00

501 lines
14 KiB
C
Raw Blame History

/*
* TI OMAP on-chip I2C controller. Only "new I2C" mode supported.
*
* Copyright (C) 2007 Andrzej Zaborowski <balrog@zabor.org>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, see <http://www.gnu.org/licenses/>.
*/
#include "hw/hw.h"
#include "hw/i2c/i2c.h"
#include "hw/arm/omap.h"
#include "hw/sysbus.h"
#define TYPE_OMAP_I2C "omap_i2c"
#define OMAP_I2C(obj) OBJECT_CHECK(OMAPI2CState, (obj), TYPE_OMAP_I2C)
typedef struct OMAPI2CState {
SysBusDevice parent_obj;
MemoryRegion iomem;
qemu_irq irq;
qemu_irq drq[2];
i2c_bus *bus;
uint8_t revision;
void *iclk;
void *fclk;
uint8_t mask;
uint16_t stat;
uint16_t dma;
uint16_t count;
int count_cur;
uint32_t fifo;
int rxlen;
int txlen;
uint16_t control;
uint16_t addr[2];
uint8_t divider;
uint8_t times[2];
uint16_t test;
} OMAPI2CState;
#define OMAP2_INTR_REV 0x34
#define OMAP2_GC_REV 0x34
static void omap_i2c_interrupts_update(OMAPI2CState *s)
{
qemu_set_irq(s->irq, s->stat & s->mask);
if ((s->dma >> 15) & 1) /* RDMA_EN */
qemu_set_irq(s->drq[0], (s->stat >> 3) & 1); /* RRDY */
if ((s->dma >> 7) & 1) /* XDMA_EN */
qemu_set_irq(s->drq[1], (s->stat >> 4) & 1); /* XRDY */
}
static void omap_i2c_fifo_run(OMAPI2CState *s)
{
int ack = 1;
if (!i2c_bus_busy(s->bus))
return;
if ((s->control >> 2) & 1) { /* RM */
if ((s->control >> 1) & 1) { /* STP */
i2c_end_transfer(s->bus);
s->control &= ~(1 << 1); /* STP */
s->count_cur = s->count;
s->txlen = 0;
} else if ((s->control >> 9) & 1) { /* TRX */
while (ack && s->txlen)
ack = (i2c_send(s->bus,
(s->fifo >> ((-- s->txlen) << 3)) &
0xff) >= 0);
s->stat |= 1 << 4; /* XRDY */
} else {
while (s->rxlen < 4)
s->fifo |= i2c_recv(s->bus) << ((s->rxlen ++) << 3);
s->stat |= 1 << 3; /* RRDY */
}
} else {
if ((s->control >> 9) & 1) { /* TRX */
while (ack && s->count_cur && s->txlen) {
ack = (i2c_send(s->bus,
(s->fifo >> ((-- s->txlen) << 3)) &
0xff) >= 0);
s->count_cur --;
}
if (ack && s->count_cur)
s->stat |= 1 << 4; /* XRDY */
else
s->stat &= ~(1 << 4); /* XRDY */
if (!s->count_cur) {
s->stat |= 1 << 2; /* ARDY */
s->control &= ~(1 << 10); /* MST */
}
} else {
while (s->count_cur && s->rxlen < 4) {
s->fifo |= i2c_recv(s->bus) << ((s->rxlen ++) << 3);
s->count_cur --;
}
if (s->rxlen)
s->stat |= 1 << 3; /* RRDY */
else
s->stat &= ~(1 << 3); /* RRDY */
}
if (!s->count_cur) {
if ((s->control >> 1) & 1) { /* STP */
i2c_end_transfer(s->bus);
s->control &= ~(1 << 1); /* STP */
s->count_cur = s->count;
s->txlen = 0;
} else {
s->stat |= 1 << 2; /* ARDY */
s->control &= ~(1 << 10); /* MST */
}
}
}
s->stat |= (!ack) << 1; /* NACK */
if (!ack)
s->control &= ~(1 << 1); /* STP */
}
static void omap_i2c_reset(DeviceState *dev)
{
OMAPI2CState *s = OMAP_I2C(dev);
s->mask = 0;
s->stat = 0;
s->dma = 0;
s->count = 0;
s->count_cur = 0;
s->fifo = 0;
s->rxlen = 0;
s->txlen = 0;
s->control = 0;
s->addr[0] = 0;
s->addr[1] = 0;
s->divider = 0;
s->times[0] = 0;
s->times[1] = 0;
s->test = 0;
}
static uint32_t omap_i2c_read(void *opaque, hwaddr addr)
{
OMAPI2CState *s = opaque;
int offset = addr & OMAP_MPUI_REG_MASK;
uint16_t ret;
switch (offset) {
case 0x00: /* I2C_REV */
return s->revision; /* REV */
case 0x04: /* I2C_IE */
return s->mask;
case 0x08: /* I2C_STAT */
return s->stat | (i2c_bus_busy(s->bus) << 12);
case 0x0c: /* I2C_IV */
if (s->revision >= OMAP2_INTR_REV)
break;
ret = ffs(s->stat & s->mask);
if (ret)
s->stat ^= 1 << (ret - 1);
omap_i2c_interrupts_update(s);
return ret;
case 0x10: /* I2C_SYSS */
return (s->control >> 15) & 1; /* I2C_EN */
case 0x14: /* I2C_BUF */
return s->dma;
case 0x18: /* I2C_CNT */
return s->count_cur; /* DCOUNT */
case 0x1c: /* I2C_DATA */
ret = 0;
if (s->control & (1 << 14)) { /* BE */
ret |= ((s->fifo >> 0) & 0xff) << 8;
ret |= ((s->fifo >> 8) & 0xff) << 0;
} else {
ret |= ((s->fifo >> 8) & 0xff) << 8;
ret |= ((s->fifo >> 0) & 0xff) << 0;
}
if (s->rxlen == 1) {
s->stat |= 1 << 15; /* SBD */
s->rxlen = 0;
} else if (s->rxlen > 1) {
if (s->rxlen > 2)
s->fifo >>= 16;
s->rxlen -= 2;
} else {
/* XXX: remote access (qualifier) error - what's that? */
}
if (!s->rxlen) {
s->stat &= ~(1 << 3); /* RRDY */
if (((s->control >> 10) & 1) && /* MST */
((~s->control >> 9) & 1)) { /* TRX */
s->stat |= 1 << 2; /* ARDY */
s->control &= ~(1 << 10); /* MST */
}
}
s->stat &= ~(1 << 11); /* ROVR */
omap_i2c_fifo_run(s);
omap_i2c_interrupts_update(s);
return ret;
case 0x20: /* I2C_SYSC */
return 0;
case 0x24: /* I2C_CON */
return s->control;
case 0x28: /* I2C_OA */
return s->addr[0];
case 0x2c: /* I2C_SA */
return s->addr[1];
case 0x30: /* I2C_PSC */
return s->divider;
case 0x34: /* I2C_SCLL */
return s->times[0];
case 0x38: /* I2C_SCLH */
return s->times[1];
case 0x3c: /* I2C_SYSTEST */
if (s->test & (1 << 15)) { /* ST_EN */
s->test ^= 0xa;
return s->test;
} else
return s->test & ~0x300f;
}
OMAP_BAD_REG(addr);
return 0;
}
static void omap_i2c_write(void *opaque, hwaddr addr,
uint32_t value)
{
OMAPI2CState *s = opaque;
int offset = addr & OMAP_MPUI_REG_MASK;
int nack;
switch (offset) {
case 0x00: /* I2C_REV */
case 0x0c: /* I2C_IV */
case 0x10: /* I2C_SYSS */
OMAP_RO_REG(addr);
return;
case 0x04: /* I2C_IE */
s->mask = value & (s->revision < OMAP2_GC_REV ? 0x1f : 0x3f);
break;
case 0x08: /* I2C_STAT */
if (s->revision < OMAP2_INTR_REV) {
OMAP_RO_REG(addr);
return;
}
/* RRDY and XRDY are reset by hardware. (in all versions???) */
s->stat &= ~(value & 0x27);
omap_i2c_interrupts_update(s);
break;
case 0x14: /* I2C_BUF */
s->dma = value & 0x8080;
if (value & (1 << 15)) /* RDMA_EN */
s->mask &= ~(1 << 3); /* RRDY_IE */
if (value & (1 << 7)) /* XDMA_EN */
s->mask &= ~(1 << 4); /* XRDY_IE */
break;
case 0x18: /* I2C_CNT */
s->count = value; /* DCOUNT */
break;
case 0x1c: /* I2C_DATA */
if (s->txlen > 2) {
/* XXX: remote access (qualifier) error - what's that? */
break;
}
s->fifo <<= 16;
s->txlen += 2;
if (s->control & (1 << 14)) { /* BE */
s->fifo |= ((value >> 8) & 0xff) << 8;
s->fifo |= ((value >> 0) & 0xff) << 0;
} else {
s->fifo |= ((value >> 0) & 0xff) << 8;
s->fifo |= ((value >> 8) & 0xff) << 0;
}
s->stat &= ~(1 << 10); /* XUDF */
if (s->txlen > 2)
s->stat &= ~(1 << 4); /* XRDY */
omap_i2c_fifo_run(s);
omap_i2c_interrupts_update(s);
break;
case 0x20: /* I2C_SYSC */
if (s->revision < OMAP2_INTR_REV) {
OMAP_BAD_REG(addr);
return;
}
if (value & 2) {
omap_i2c_reset(DEVICE(s));
}
break;
case 0x24: /* I2C_CON */
s->control = value & 0xcf87;
if (~value & (1 << 15)) { /* I2C_EN */
if (s->revision < OMAP2_INTR_REV) {
omap_i2c_reset(DEVICE(s));
}
break;
}
if ((value & (1 << 15)) && !(value & (1 << 10))) { /* MST */
fprintf(stderr, "%s: I^2C slave mode not supported\n",
__FUNCTION__);
break;
}
if ((value & (1 << 15)) && value & (1 << 8)) { /* XA */
fprintf(stderr, "%s: 10-bit addressing mode not supported\n",
__FUNCTION__);
break;
}
if ((value & (1 << 15)) && value & (1 << 0)) { /* STT */
nack = !!i2c_start_transfer(s->bus, s->addr[1], /* SA */
(~value >> 9) & 1); /* TRX */
s->stat |= nack << 1; /* NACK */
s->control &= ~(1 << 0); /* STT */
s->fifo = 0;
if (nack)
s->control &= ~(1 << 1); /* STP */
else {
s->count_cur = s->count;
omap_i2c_fifo_run(s);
}
omap_i2c_interrupts_update(s);
}
break;
case 0x28: /* I2C_OA */
s->addr[0] = value & 0x3ff;
break;
case 0x2c: /* I2C_SA */
s->addr[1] = value & 0x3ff;
break;
case 0x30: /* I2C_PSC */
s->divider = value;
break;
case 0x34: /* I2C_SCLL */
s->times[0] = value;
break;
case 0x38: /* I2C_SCLH */
s->times[1] = value;
break;
case 0x3c: /* I2C_SYSTEST */
s->test = value & 0xf80f;
if (value & (1 << 11)) /* SBB */
if (s->revision >= OMAP2_INTR_REV) {
s->stat |= 0x3f;
omap_i2c_interrupts_update(s);
}
if (value & (1 << 15)) /* ST_EN */
fprintf(stderr, "%s: System Test not supported\n", __FUNCTION__);
break;
default:
OMAP_BAD_REG(addr);
return;
}
}
static void omap_i2c_writeb(void *opaque, hwaddr addr,
uint32_t value)
{
OMAPI2CState *s = opaque;
int offset = addr & OMAP_MPUI_REG_MASK;
switch (offset) {
case 0x1c: /* I2C_DATA */
if (s->txlen > 2) {
/* XXX: remote access (qualifier) error - what's that? */
break;
}
s->fifo <<= 8;
s->txlen += 1;
s->fifo |= value & 0xff;
s->stat &= ~(1 << 10); /* XUDF */
if (s->txlen > 2)
s->stat &= ~(1 << 4); /* XRDY */
omap_i2c_fifo_run(s);
omap_i2c_interrupts_update(s);
break;
default:
OMAP_BAD_REG(addr);
return;
}
}
static const MemoryRegionOps omap_i2c_ops = {
.old_mmio = {
.read = {
omap_badwidth_read16,
omap_i2c_read,
omap_badwidth_read16,
},
.write = {
omap_i2c_writeb, /* Only the last fifo write can be 8 bit. */
omap_i2c_write,
omap_badwidth_write16,
},
},
.endianness = DEVICE_NATIVE_ENDIAN,
};
static int omap_i2c_init(SysBusDevice *sbd)
{
DeviceState *dev = DEVICE(sbd);
OMAPI2CState *s = OMAP_I2C(dev);
if (!s->fclk) {
hw_error("omap_i2c: fclk not connected\n");
}
if (s->revision >= OMAP2_INTR_REV && !s->iclk) {
/* Note that OMAP1 doesn't have a separate interface clock */
hw_error("omap_i2c: iclk not connected\n");
}
sysbus_init_irq(sbd, &s->irq);
sysbus_init_irq(sbd, &s->drq[0]);
sysbus_init_irq(sbd, &s->drq[1]);
memory_region_init_io(&s->iomem, OBJECT(s), &omap_i2c_ops, s, "omap.i2c",
(s->revision < OMAP2_INTR_REV) ? 0x800 : 0x1000);
sysbus_init_mmio(sbd, &s->iomem);
s->bus = i2c_init_bus(dev, NULL);
return 0;
}
static Property omap_i2c_properties[] = {
DEFINE_PROP_UINT8("revision", OMAPI2CState, revision, 0),
DEFINE_PROP_PTR("iclk", OMAPI2CState, iclk),
DEFINE_PROP_PTR("fclk", OMAPI2CState, fclk),
DEFINE_PROP_END_OF_LIST(),
};
static void omap_i2c_class_init(ObjectClass *klass, void *data)
{
DeviceClass *dc = DEVICE_CLASS(klass);
SysBusDeviceClass *k = SYS_BUS_DEVICE_CLASS(klass);
k->init = omap_i2c_init;
dc->props = omap_i2c_properties;
dc->reset = omap_i2c_reset;
/* Reason: pointer properties "iclk", "fclk" */
dc->cannot_instantiate_with_device_add_yet = true;
}
static const TypeInfo omap_i2c_info = {
.name = TYPE_OMAP_I2C,
.parent = TYPE_SYS_BUS_DEVICE,
.instance_size = sizeof(OMAPI2CState),
.class_init = omap_i2c_class_init,
};
static void omap_i2c_register_types(void)
{
type_register_static(&omap_i2c_info);
}
i2c_bus *omap_i2c_bus(DeviceState *omap_i2c)
{
OMAPI2CState *s = OMAP_I2C(omap_i2c);
return s->bus;
}
type_init(omap_i2c_register_types)
Reference in New Issue View Git Blame Copy Permalink