54196ade09
The omap_dma4 device was only used in the OMAP2 SoC, which has been removed. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20240903160751.4100218-53-peter.maydell@linaro.org
1679 lines
48 KiB
C
1679 lines
48 KiB
C
/*
|
|
* TI OMAP DMA gigacell.
|
|
*
|
|
* Copyright (C) 2006-2008 Andrzej Zaborowski <balrog@zabor.org>
|
|
* Copyright (C) 2007-2008 Lauro Ramos Venancio <lauro.venancio@indt.org.br>
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License along
|
|
* with this program; if not, see <http://www.gnu.org/licenses/>.
|
|
*/
|
|
#include "qemu/osdep.h"
|
|
#include "qemu/log.h"
|
|
#include "qemu/timer.h"
|
|
#include "hw/arm/omap.h"
|
|
#include "hw/irq.h"
|
|
#include "hw/arm/soc_dma.h"
|
|
|
|
struct omap_dma_channel_s {
|
|
/* transfer data */
|
|
int burst[2];
|
|
int pack[2];
|
|
int endian[2];
|
|
int endian_lock[2];
|
|
int translate[2];
|
|
enum omap_dma_port port[2];
|
|
hwaddr addr[2];
|
|
omap_dma_addressing_t mode[2];
|
|
uint32_t elements;
|
|
uint16_t frames;
|
|
int32_t frame_index[2];
|
|
int16_t element_index[2];
|
|
int data_type;
|
|
|
|
/* transfer type */
|
|
int transparent_copy;
|
|
int constant_fill;
|
|
uint32_t color;
|
|
int prefetch;
|
|
|
|
/* auto init and linked channel data */
|
|
int end_prog;
|
|
int repeat;
|
|
int auto_init;
|
|
int link_enabled;
|
|
int link_next_ch;
|
|
|
|
/* interruption data */
|
|
int interrupts;
|
|
int status;
|
|
int cstatus;
|
|
|
|
/* state data */
|
|
int active;
|
|
int enable;
|
|
int sync;
|
|
int src_sync;
|
|
int pending_request;
|
|
int waiting_end_prog;
|
|
uint16_t cpc;
|
|
int set_update;
|
|
|
|
/* sync type */
|
|
int fs;
|
|
int bs;
|
|
|
|
/* compatibility */
|
|
int omap_3_1_compatible_disable;
|
|
|
|
qemu_irq irq;
|
|
struct omap_dma_channel_s *sibling;
|
|
|
|
struct omap_dma_reg_set_s {
|
|
hwaddr src, dest;
|
|
int frame;
|
|
int element;
|
|
int pck_element;
|
|
int frame_delta[2];
|
|
int elem_delta[2];
|
|
int frames;
|
|
int elements;
|
|
int pck_elements;
|
|
} active_set;
|
|
|
|
struct soc_dma_ch_s *dma;
|
|
|
|
/* unused parameters */
|
|
int write_mode;
|
|
int priority;
|
|
int interleave_disabled;
|
|
int type;
|
|
int suspend;
|
|
int buf_disable;
|
|
};
|
|
|
|
struct omap_dma_s {
|
|
struct soc_dma_s *dma;
|
|
MemoryRegion iomem;
|
|
|
|
struct omap_mpu_state_s *mpu;
|
|
omap_clk clk;
|
|
qemu_irq irq[4];
|
|
void (*intr_update)(struct omap_dma_s *s);
|
|
enum omap_dma_model model;
|
|
int omap_3_1_mapping_disabled;
|
|
|
|
uint32_t gcr;
|
|
uint32_t ocp;
|
|
uint32_t caps[5];
|
|
uint32_t irqen[4];
|
|
uint32_t irqstat[4];
|
|
|
|
int chans;
|
|
struct omap_dma_channel_s ch[32];
|
|
struct omap_dma_lcd_channel_s lcd_ch;
|
|
};
|
|
|
|
/* Interrupts */
|
|
#define TIMEOUT_INTR (1 << 0)
|
|
#define EVENT_DROP_INTR (1 << 1)
|
|
#define HALF_FRAME_INTR (1 << 2)
|
|
#define END_FRAME_INTR (1 << 3)
|
|
#define LAST_FRAME_INTR (1 << 4)
|
|
#define END_BLOCK_INTR (1 << 5)
|
|
#define SYNC (1 << 6)
|
|
#define END_PKT_INTR (1 << 7)
|
|
#define TRANS_ERR_INTR (1 << 8)
|
|
#define MISALIGN_INTR (1 << 11)
|
|
|
|
static inline void omap_dma_interrupts_update(struct omap_dma_s *s)
|
|
{
|
|
s->intr_update(s);
|
|
}
|
|
|
|
static void omap_dma_channel_load(struct omap_dma_channel_s *ch)
|
|
{
|
|
struct omap_dma_reg_set_s *a = &ch->active_set;
|
|
int i, normal;
|
|
int omap_3_1 = !ch->omap_3_1_compatible_disable;
|
|
|
|
/*
|
|
* TODO: verify address ranges and alignment
|
|
* TODO: port endianness
|
|
*/
|
|
|
|
a->src = ch->addr[0];
|
|
a->dest = ch->addr[1];
|
|
a->frames = ch->frames;
|
|
a->elements = ch->elements;
|
|
a->pck_elements = ch->frame_index[!ch->src_sync];
|
|
a->frame = 0;
|
|
a->element = 0;
|
|
a->pck_element = 0;
|
|
|
|
if (unlikely(!ch->elements || !ch->frames)) {
|
|
printf("%s: bad DMA request\n", __func__);
|
|
return;
|
|
}
|
|
|
|
for (i = 0; i < 2; i ++)
|
|
switch (ch->mode[i]) {
|
|
case constant:
|
|
a->elem_delta[i] = 0;
|
|
a->frame_delta[i] = 0;
|
|
break;
|
|
case post_incremented:
|
|
a->elem_delta[i] = ch->data_type;
|
|
a->frame_delta[i] = 0;
|
|
break;
|
|
case single_index:
|
|
a->elem_delta[i] = ch->data_type +
|
|
ch->element_index[omap_3_1 ? 0 : i] - 1;
|
|
a->frame_delta[i] = 0;
|
|
break;
|
|
case double_index:
|
|
a->elem_delta[i] = ch->data_type +
|
|
ch->element_index[omap_3_1 ? 0 : i] - 1;
|
|
a->frame_delta[i] = ch->frame_index[omap_3_1 ? 0 : i] -
|
|
ch->element_index[omap_3_1 ? 0 : i];
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
|
|
normal = !ch->transparent_copy && !ch->constant_fill &&
|
|
/* FIFO is big-endian so either (ch->endian[n] == 1) OR
|
|
* (ch->endian_lock[n] == 1) mean no endianism conversion. */
|
|
(ch->endian[0] | ch->endian_lock[0]) ==
|
|
(ch->endian[1] | ch->endian_lock[1]);
|
|
for (i = 0; i < 2; i ++) {
|
|
/* TODO: for a->frame_delta[i] > 0 still use the fast path, just
|
|
* limit min_elems in omap_dma_transfer_setup to the nearest frame
|
|
* end. */
|
|
if (!a->elem_delta[i] && normal &&
|
|
(a->frames == 1 || !a->frame_delta[i]))
|
|
ch->dma->type[i] = soc_dma_access_const;
|
|
else if (a->elem_delta[i] == ch->data_type && normal &&
|
|
(a->frames == 1 || !a->frame_delta[i]))
|
|
ch->dma->type[i] = soc_dma_access_linear;
|
|
else
|
|
ch->dma->type[i] = soc_dma_access_other;
|
|
|
|
ch->dma->vaddr[i] = ch->addr[i];
|
|
}
|
|
soc_dma_ch_update(ch->dma);
|
|
}
|
|
|
|
static void omap_dma_activate_channel(struct omap_dma_s *s,
|
|
struct omap_dma_channel_s *ch)
|
|
{
|
|
if (!ch->active) {
|
|
if (ch->set_update) {
|
|
/* It's not clear when the active set is supposed to be
|
|
* loaded from registers. We're already loading it when the
|
|
* channel is enabled, and for some guests this is not enough
|
|
* but that may be also because of a race condition (no
|
|
* delays in qemu) in the guest code, which we're just
|
|
* working around here. */
|
|
omap_dma_channel_load(ch);
|
|
ch->set_update = 0;
|
|
}
|
|
|
|
ch->active = 1;
|
|
soc_dma_set_request(ch->dma, 1);
|
|
if (ch->sync)
|
|
ch->status |= SYNC;
|
|
}
|
|
}
|
|
|
|
static void omap_dma_deactivate_channel(struct omap_dma_s *s,
|
|
struct omap_dma_channel_s *ch)
|
|
{
|
|
/* Update cpc */
|
|
ch->cpc = ch->active_set.dest & 0xffff;
|
|
|
|
if (ch->pending_request && !ch->waiting_end_prog && ch->enable) {
|
|
/* Don't deactivate the channel */
|
|
ch->pending_request = 0;
|
|
return;
|
|
}
|
|
|
|
/* Don't deactivate the channel if it is synchronized and the DMA request is
|
|
active */
|
|
if (ch->sync && ch->enable && (s->dma->drqbmp & (1ULL << ch->sync)))
|
|
return;
|
|
|
|
if (ch->active) {
|
|
ch->active = 0;
|
|
ch->status &= ~SYNC;
|
|
soc_dma_set_request(ch->dma, 0);
|
|
}
|
|
}
|
|
|
|
static void omap_dma_enable_channel(struct omap_dma_s *s,
|
|
struct omap_dma_channel_s *ch)
|
|
{
|
|
if (!ch->enable) {
|
|
ch->enable = 1;
|
|
ch->waiting_end_prog = 0;
|
|
omap_dma_channel_load(ch);
|
|
/* TODO: theoretically if ch->sync && ch->prefetch &&
|
|
* !s->dma->drqbmp[ch->sync], we should also activate and fetch
|
|
* from source and then stall until signalled. */
|
|
if ((!ch->sync) || (s->dma->drqbmp & (1ULL << ch->sync))) {
|
|
omap_dma_activate_channel(s, ch);
|
|
}
|
|
}
|
|
}
|
|
|
|
static void omap_dma_disable_channel(struct omap_dma_s *s,
|
|
struct omap_dma_channel_s *ch)
|
|
{
|
|
if (ch->enable) {
|
|
ch->enable = 0;
|
|
/* Discard any pending request */
|
|
ch->pending_request = 0;
|
|
omap_dma_deactivate_channel(s, ch);
|
|
}
|
|
}
|
|
|
|
static void omap_dma_channel_end_prog(struct omap_dma_s *s,
|
|
struct omap_dma_channel_s *ch)
|
|
{
|
|
if (ch->waiting_end_prog) {
|
|
ch->waiting_end_prog = 0;
|
|
if (!ch->sync || ch->pending_request) {
|
|
ch->pending_request = 0;
|
|
omap_dma_activate_channel(s, ch);
|
|
}
|
|
}
|
|
}
|
|
|
|
static void omap_dma_interrupts_3_1_update(struct omap_dma_s *s)
|
|
{
|
|
struct omap_dma_channel_s *ch = s->ch;
|
|
|
|
/* First three interrupts are shared between two channels each. */
|
|
if (ch[0].status | ch[6].status)
|
|
qemu_irq_raise(ch[0].irq);
|
|
if (ch[1].status | ch[7].status)
|
|
qemu_irq_raise(ch[1].irq);
|
|
if (ch[2].status | ch[8].status)
|
|
qemu_irq_raise(ch[2].irq);
|
|
if (ch[3].status)
|
|
qemu_irq_raise(ch[3].irq);
|
|
if (ch[4].status)
|
|
qemu_irq_raise(ch[4].irq);
|
|
if (ch[5].status)
|
|
qemu_irq_raise(ch[5].irq);
|
|
}
|
|
|
|
static void omap_dma_interrupts_3_2_update(struct omap_dma_s *s)
|
|
{
|
|
struct omap_dma_channel_s *ch = s->ch;
|
|
int i;
|
|
|
|
for (i = s->chans; i; ch ++, i --)
|
|
if (ch->status)
|
|
qemu_irq_raise(ch->irq);
|
|
}
|
|
|
|
static void omap_dma_enable_3_1_mapping(struct omap_dma_s *s)
|
|
{
|
|
s->omap_3_1_mapping_disabled = 0;
|
|
s->chans = 9;
|
|
s->intr_update = omap_dma_interrupts_3_1_update;
|
|
}
|
|
|
|
static void omap_dma_disable_3_1_mapping(struct omap_dma_s *s)
|
|
{
|
|
s->omap_3_1_mapping_disabled = 1;
|
|
s->chans = 16;
|
|
s->intr_update = omap_dma_interrupts_3_2_update;
|
|
}
|
|
|
|
static void omap_dma_process_request(struct omap_dma_s *s, int request)
|
|
{
|
|
int channel;
|
|
int drop_event = 0;
|
|
struct omap_dma_channel_s *ch = s->ch;
|
|
|
|
for (channel = 0; channel < s->chans; channel ++, ch ++) {
|
|
if (ch->enable && ch->sync == request) {
|
|
if (!ch->active)
|
|
omap_dma_activate_channel(s, ch);
|
|
else if (!ch->pending_request)
|
|
ch->pending_request = 1;
|
|
else {
|
|
/* Request collision */
|
|
/* Second request received while processing other request */
|
|
ch->status |= EVENT_DROP_INTR;
|
|
drop_event = 1;
|
|
}
|
|
}
|
|
}
|
|
|
|
if (drop_event)
|
|
omap_dma_interrupts_update(s);
|
|
}
|
|
|
|
static void omap_dma_transfer_generic(struct soc_dma_ch_s *dma)
|
|
{
|
|
uint8_t value[4];
|
|
struct omap_dma_channel_s *ch = dma->opaque;
|
|
struct omap_dma_reg_set_s *a = &ch->active_set;
|
|
int bytes = dma->bytes;
|
|
#ifdef MULTI_REQ
|
|
uint16_t status = ch->status;
|
|
#endif
|
|
|
|
do {
|
|
/* Transfer a single element */
|
|
/* FIXME: check the endianness */
|
|
if (!ch->constant_fill)
|
|
cpu_physical_memory_read(a->src, value, ch->data_type);
|
|
else
|
|
*(uint32_t *) value = ch->color;
|
|
|
|
if (!ch->transparent_copy || *(uint32_t *) value != ch->color)
|
|
cpu_physical_memory_write(a->dest, value, ch->data_type);
|
|
|
|
a->src += a->elem_delta[0];
|
|
a->dest += a->elem_delta[1];
|
|
a->element ++;
|
|
|
|
#ifndef MULTI_REQ
|
|
if (a->element == a->elements) {
|
|
/* End of Frame */
|
|
a->element = 0;
|
|
a->src += a->frame_delta[0];
|
|
a->dest += a->frame_delta[1];
|
|
a->frame ++;
|
|
|
|
/* If the channel is async, update cpc */
|
|
if (!ch->sync)
|
|
ch->cpc = a->dest & 0xffff;
|
|
}
|
|
} while ((bytes -= ch->data_type));
|
|
#else
|
|
/* If the channel is element synchronized, deactivate it */
|
|
if (ch->sync && !ch->fs && !ch->bs)
|
|
omap_dma_deactivate_channel(s, ch);
|
|
|
|
/* If it is the last frame, set the LAST_FRAME interrupt */
|
|
if (a->element == 1 && a->frame == a->frames - 1)
|
|
if (ch->interrupts & LAST_FRAME_INTR)
|
|
ch->status |= LAST_FRAME_INTR;
|
|
|
|
/* If the half of the frame was reached, set the HALF_FRAME
|
|
interrupt */
|
|
if (a->element == (a->elements >> 1))
|
|
if (ch->interrupts & HALF_FRAME_INTR)
|
|
ch->status |= HALF_FRAME_INTR;
|
|
|
|
if (ch->fs && ch->bs) {
|
|
a->pck_element ++;
|
|
/* Check if a full packet has been transferred. */
|
|
if (a->pck_element == a->pck_elements) {
|
|
a->pck_element = 0;
|
|
|
|
/* Set the END_PKT interrupt */
|
|
if ((ch->interrupts & END_PKT_INTR) && !ch->src_sync)
|
|
ch->status |= END_PKT_INTR;
|
|
|
|
/* If the channel is packet-synchronized, deactivate it */
|
|
if (ch->sync)
|
|
omap_dma_deactivate_channel(s, ch);
|
|
}
|
|
}
|
|
|
|
if (a->element == a->elements) {
|
|
/* End of Frame */
|
|
a->element = 0;
|
|
a->src += a->frame_delta[0];
|
|
a->dest += a->frame_delta[1];
|
|
a->frame ++;
|
|
|
|
/* If the channel is frame synchronized, deactivate it */
|
|
if (ch->sync && ch->fs && !ch->bs)
|
|
omap_dma_deactivate_channel(s, ch);
|
|
|
|
/* If the channel is async, update cpc */
|
|
if (!ch->sync)
|
|
ch->cpc = a->dest & 0xffff;
|
|
|
|
/* Set the END_FRAME interrupt */
|
|
if (ch->interrupts & END_FRAME_INTR)
|
|
ch->status |= END_FRAME_INTR;
|
|
|
|
if (a->frame == a->frames) {
|
|
/* End of Block */
|
|
/* Disable the channel */
|
|
|
|
if (ch->omap_3_1_compatible_disable) {
|
|
omap_dma_disable_channel(s, ch);
|
|
if (ch->link_enabled)
|
|
omap_dma_enable_channel(s,
|
|
&s->ch[ch->link_next_ch]);
|
|
} else {
|
|
if (!ch->auto_init)
|
|
omap_dma_disable_channel(s, ch);
|
|
else if (ch->repeat || ch->end_prog)
|
|
omap_dma_channel_load(ch);
|
|
else {
|
|
ch->waiting_end_prog = 1;
|
|
omap_dma_deactivate_channel(s, ch);
|
|
}
|
|
}
|
|
|
|
if (ch->interrupts & END_BLOCK_INTR)
|
|
ch->status |= END_BLOCK_INTR;
|
|
}
|
|
}
|
|
} while (status == ch->status && ch->active);
|
|
|
|
omap_dma_interrupts_update(s);
|
|
#endif
|
|
}
|
|
|
|
enum {
|
|
omap_dma_intr_element_sync,
|
|
omap_dma_intr_last_frame,
|
|
omap_dma_intr_half_frame,
|
|
omap_dma_intr_frame,
|
|
omap_dma_intr_frame_sync,
|
|
omap_dma_intr_packet,
|
|
omap_dma_intr_packet_sync,
|
|
omap_dma_intr_block,
|
|
__omap_dma_intr_last,
|
|
};
|
|
|
|
static void omap_dma_transfer_setup(struct soc_dma_ch_s *dma)
|
|
{
|
|
struct omap_dma_port_if_s *src_p, *dest_p;
|
|
struct omap_dma_reg_set_s *a;
|
|
struct omap_dma_channel_s *ch = dma->opaque;
|
|
struct omap_dma_s *s = dma->dma->opaque;
|
|
int frames, min_elems, elements[__omap_dma_intr_last];
|
|
|
|
a = &ch->active_set;
|
|
|
|
src_p = &s->mpu->port[ch->port[0]];
|
|
dest_p = &s->mpu->port[ch->port[1]];
|
|
if ((!ch->constant_fill && !src_p->addr_valid(s->mpu, a->src)) ||
|
|
(!dest_p->addr_valid(s->mpu, a->dest))) {
|
|
#if 0
|
|
/* Bus time-out */
|
|
if (ch->interrupts & TIMEOUT_INTR)
|
|
ch->status |= TIMEOUT_INTR;
|
|
omap_dma_deactivate_channel(s, ch);
|
|
continue;
|
|
#endif
|
|
printf("%s: Bus time-out in DMA%i operation\n",
|
|
__func__, dma->num);
|
|
}
|
|
|
|
min_elems = INT_MAX;
|
|
|
|
/* Check all the conditions that terminate the transfer starting
|
|
* with those that can occur the soonest. */
|
|
#define INTR_CHECK(cond, id, nelements) \
|
|
if (cond) { \
|
|
elements[id] = nelements; \
|
|
if (elements[id] < min_elems) \
|
|
min_elems = elements[id]; \
|
|
} else \
|
|
elements[id] = INT_MAX;
|
|
|
|
/* Elements */
|
|
INTR_CHECK(
|
|
ch->sync && !ch->fs && !ch->bs,
|
|
omap_dma_intr_element_sync,
|
|
1)
|
|
|
|
/* Frames */
|
|
/* TODO: for transfers where entire frames can be read and written
|
|
* using memcpy() but a->frame_delta is non-zero, try to still do
|
|
* transfers using soc_dma but limit min_elems to a->elements - ...
|
|
* See also the TODO in omap_dma_channel_load. */
|
|
INTR_CHECK(
|
|
(ch->interrupts & LAST_FRAME_INTR) &&
|
|
((a->frame < a->frames - 1) || !a->element),
|
|
omap_dma_intr_last_frame,
|
|
(a->frames - a->frame - 2) * a->elements +
|
|
(a->elements - a->element + 1))
|
|
INTR_CHECK(
|
|
ch->interrupts & HALF_FRAME_INTR,
|
|
omap_dma_intr_half_frame,
|
|
(a->elements >> 1) +
|
|
(a->element >= (a->elements >> 1) ? a->elements : 0) -
|
|
a->element)
|
|
INTR_CHECK(
|
|
ch->sync && ch->fs && (ch->interrupts & END_FRAME_INTR),
|
|
omap_dma_intr_frame,
|
|
a->elements - a->element)
|
|
INTR_CHECK(
|
|
ch->sync && ch->fs && !ch->bs,
|
|
omap_dma_intr_frame_sync,
|
|
a->elements - a->element)
|
|
|
|
/* Packets */
|
|
INTR_CHECK(
|
|
ch->fs && ch->bs &&
|
|
(ch->interrupts & END_PKT_INTR) && !ch->src_sync,
|
|
omap_dma_intr_packet,
|
|
a->pck_elements - a->pck_element)
|
|
INTR_CHECK(
|
|
ch->fs && ch->bs && ch->sync,
|
|
omap_dma_intr_packet_sync,
|
|
a->pck_elements - a->pck_element)
|
|
|
|
/* Blocks */
|
|
INTR_CHECK(
|
|
1,
|
|
omap_dma_intr_block,
|
|
(a->frames - a->frame - 1) * a->elements +
|
|
(a->elements - a->element))
|
|
|
|
dma->bytes = min_elems * ch->data_type;
|
|
|
|
/* Set appropriate interrupts and/or deactivate channels */
|
|
|
|
#ifdef MULTI_REQ
|
|
/* TODO: should all of this only be done if dma->update, and otherwise
|
|
* inside omap_dma_transfer_generic below - check what's faster. */
|
|
if (dma->update) {
|
|
#endif
|
|
|
|
/* If the channel is element synchronized, deactivate it */
|
|
if (min_elems == elements[omap_dma_intr_element_sync])
|
|
omap_dma_deactivate_channel(s, ch);
|
|
|
|
/* If it is the last frame, set the LAST_FRAME interrupt */
|
|
if (min_elems == elements[omap_dma_intr_last_frame])
|
|
ch->status |= LAST_FRAME_INTR;
|
|
|
|
/* If exactly half of the frame was reached, set the HALF_FRAME
|
|
interrupt */
|
|
if (min_elems == elements[omap_dma_intr_half_frame])
|
|
ch->status |= HALF_FRAME_INTR;
|
|
|
|
/* If a full packet has been transferred, set the END_PKT interrupt */
|
|
if (min_elems == elements[omap_dma_intr_packet])
|
|
ch->status |= END_PKT_INTR;
|
|
|
|
/* If the channel is packet-synchronized, deactivate it */
|
|
if (min_elems == elements[omap_dma_intr_packet_sync])
|
|
omap_dma_deactivate_channel(s, ch);
|
|
|
|
/* If the channel is frame synchronized, deactivate it */
|
|
if (min_elems == elements[omap_dma_intr_frame_sync])
|
|
omap_dma_deactivate_channel(s, ch);
|
|
|
|
/* Set the END_FRAME interrupt */
|
|
if (min_elems == elements[omap_dma_intr_frame])
|
|
ch->status |= END_FRAME_INTR;
|
|
|
|
if (min_elems == elements[omap_dma_intr_block]) {
|
|
/* End of Block */
|
|
/* Disable the channel */
|
|
|
|
if (ch->omap_3_1_compatible_disable) {
|
|
omap_dma_disable_channel(s, ch);
|
|
if (ch->link_enabled)
|
|
omap_dma_enable_channel(s, &s->ch[ch->link_next_ch]);
|
|
} else {
|
|
if (!ch->auto_init)
|
|
omap_dma_disable_channel(s, ch);
|
|
else if (ch->repeat || ch->end_prog)
|
|
omap_dma_channel_load(ch);
|
|
else {
|
|
ch->waiting_end_prog = 1;
|
|
omap_dma_deactivate_channel(s, ch);
|
|
}
|
|
}
|
|
|
|
if (ch->interrupts & END_BLOCK_INTR)
|
|
ch->status |= END_BLOCK_INTR;
|
|
}
|
|
|
|
/* Update packet number */
|
|
if (ch->fs && ch->bs) {
|
|
a->pck_element += min_elems;
|
|
a->pck_element %= a->pck_elements;
|
|
}
|
|
|
|
/* TODO: check if we really need to update anything here or perhaps we
|
|
* can skip part of this. */
|
|
#ifndef MULTI_REQ
|
|
if (dma->update) {
|
|
#endif
|
|
a->element += min_elems;
|
|
|
|
frames = a->element / a->elements;
|
|
a->element = a->element % a->elements;
|
|
a->frame += frames;
|
|
a->src += min_elems * a->elem_delta[0] + frames * a->frame_delta[0];
|
|
a->dest += min_elems * a->elem_delta[1] + frames * a->frame_delta[1];
|
|
|
|
/* If the channel is async, update cpc */
|
|
if (!ch->sync && frames)
|
|
ch->cpc = a->dest & 0xffff;
|
|
|
|
/* TODO: if the destination port is IMIF or EMIFF, set the dirty
|
|
* bits on it. */
|
|
#ifndef MULTI_REQ
|
|
}
|
|
#else
|
|
}
|
|
#endif
|
|
|
|
omap_dma_interrupts_update(s);
|
|
}
|
|
|
|
void omap_dma_reset(struct soc_dma_s *dma)
|
|
{
|
|
int i;
|
|
struct omap_dma_s *s = dma->opaque;
|
|
|
|
soc_dma_reset(s->dma);
|
|
s->gcr = 0x0004;
|
|
s->ocp = 0x00000000;
|
|
memset(&s->irqstat, 0, sizeof(s->irqstat));
|
|
memset(&s->irqen, 0, sizeof(s->irqen));
|
|
s->lcd_ch.src = emiff;
|
|
s->lcd_ch.condition = 0;
|
|
s->lcd_ch.interrupts = 0;
|
|
s->lcd_ch.dual = 0;
|
|
omap_dma_enable_3_1_mapping(s);
|
|
for (i = 0; i < s->chans; i ++) {
|
|
s->ch[i].suspend = 0;
|
|
s->ch[i].prefetch = 0;
|
|
s->ch[i].buf_disable = 0;
|
|
s->ch[i].src_sync = 0;
|
|
memset(&s->ch[i].burst, 0, sizeof(s->ch[i].burst));
|
|
memset(&s->ch[i].port, 0, sizeof(s->ch[i].port));
|
|
memset(&s->ch[i].mode, 0, sizeof(s->ch[i].mode));
|
|
memset(&s->ch[i].frame_index, 0, sizeof(s->ch[i].frame_index));
|
|
memset(&s->ch[i].element_index, 0, sizeof(s->ch[i].element_index));
|
|
memset(&s->ch[i].endian, 0, sizeof(s->ch[i].endian));
|
|
memset(&s->ch[i].endian_lock, 0, sizeof(s->ch[i].endian_lock));
|
|
memset(&s->ch[i].translate, 0, sizeof(s->ch[i].translate));
|
|
s->ch[i].write_mode = 0;
|
|
s->ch[i].data_type = 0;
|
|
s->ch[i].transparent_copy = 0;
|
|
s->ch[i].constant_fill = 0;
|
|
s->ch[i].color = 0x00000000;
|
|
s->ch[i].end_prog = 0;
|
|
s->ch[i].repeat = 0;
|
|
s->ch[i].auto_init = 0;
|
|
s->ch[i].link_enabled = 0;
|
|
s->ch[i].interrupts = 0x0003;
|
|
s->ch[i].status = 0;
|
|
s->ch[i].cstatus = 0;
|
|
s->ch[i].active = 0;
|
|
s->ch[i].enable = 0;
|
|
s->ch[i].sync = 0;
|
|
s->ch[i].pending_request = 0;
|
|
s->ch[i].waiting_end_prog = 0;
|
|
s->ch[i].cpc = 0x0000;
|
|
s->ch[i].fs = 0;
|
|
s->ch[i].bs = 0;
|
|
s->ch[i].omap_3_1_compatible_disable = 0;
|
|
memset(&s->ch[i].active_set, 0, sizeof(s->ch[i].active_set));
|
|
s->ch[i].priority = 0;
|
|
s->ch[i].interleave_disabled = 0;
|
|
s->ch[i].type = 0;
|
|
}
|
|
}
|
|
|
|
static int omap_dma_ch_reg_read(struct omap_dma_s *s,
|
|
struct omap_dma_channel_s *ch, int reg, uint16_t *value)
|
|
{
|
|
switch (reg) {
|
|
case 0x00: /* SYS_DMA_CSDP_CH0 */
|
|
*value = (ch->burst[1] << 14) |
|
|
(ch->pack[1] << 13) |
|
|
(ch->port[1] << 9) |
|
|
(ch->burst[0] << 7) |
|
|
(ch->pack[0] << 6) |
|
|
(ch->port[0] << 2) |
|
|
(ch->data_type >> 1);
|
|
break;
|
|
|
|
case 0x02: /* SYS_DMA_CCR_CH0 */
|
|
if (s->model <= omap_dma_3_1)
|
|
*value = 0 << 10; /* FIFO_FLUSH reads as 0 */
|
|
else
|
|
*value = ch->omap_3_1_compatible_disable << 10;
|
|
*value |= (ch->mode[1] << 14) |
|
|
(ch->mode[0] << 12) |
|
|
(ch->end_prog << 11) |
|
|
(ch->repeat << 9) |
|
|
(ch->auto_init << 8) |
|
|
(ch->enable << 7) |
|
|
(ch->priority << 6) |
|
|
(ch->fs << 5) | ch->sync;
|
|
break;
|
|
|
|
case 0x04: /* SYS_DMA_CICR_CH0 */
|
|
*value = ch->interrupts;
|
|
break;
|
|
|
|
case 0x06: /* SYS_DMA_CSR_CH0 */
|
|
*value = ch->status;
|
|
ch->status &= SYNC;
|
|
if (!ch->omap_3_1_compatible_disable && ch->sibling) {
|
|
*value |= (ch->sibling->status & 0x3f) << 6;
|
|
ch->sibling->status &= SYNC;
|
|
}
|
|
qemu_irq_lower(ch->irq);
|
|
break;
|
|
|
|
case 0x08: /* SYS_DMA_CSSA_L_CH0 */
|
|
*value = ch->addr[0] & 0x0000ffff;
|
|
break;
|
|
|
|
case 0x0a: /* SYS_DMA_CSSA_U_CH0 */
|
|
*value = ch->addr[0] >> 16;
|
|
break;
|
|
|
|
case 0x0c: /* SYS_DMA_CDSA_L_CH0 */
|
|
*value = ch->addr[1] & 0x0000ffff;
|
|
break;
|
|
|
|
case 0x0e: /* SYS_DMA_CDSA_U_CH0 */
|
|
*value = ch->addr[1] >> 16;
|
|
break;
|
|
|
|
case 0x10: /* SYS_DMA_CEN_CH0 */
|
|
*value = ch->elements;
|
|
break;
|
|
|
|
case 0x12: /* SYS_DMA_CFN_CH0 */
|
|
*value = ch->frames;
|
|
break;
|
|
|
|
case 0x14: /* SYS_DMA_CFI_CH0 */
|
|
*value = ch->frame_index[0];
|
|
break;
|
|
|
|
case 0x16: /* SYS_DMA_CEI_CH0 */
|
|
*value = ch->element_index[0];
|
|
break;
|
|
|
|
case 0x18: /* SYS_DMA_CPC_CH0 or DMA_CSAC */
|
|
if (ch->omap_3_1_compatible_disable)
|
|
*value = ch->active_set.src & 0xffff; /* CSAC */
|
|
else
|
|
*value = ch->cpc;
|
|
break;
|
|
|
|
case 0x1a: /* DMA_CDAC */
|
|
*value = ch->active_set.dest & 0xffff; /* CDAC */
|
|
break;
|
|
|
|
case 0x1c: /* DMA_CDEI */
|
|
*value = ch->element_index[1];
|
|
break;
|
|
|
|
case 0x1e: /* DMA_CDFI */
|
|
*value = ch->frame_index[1];
|
|
break;
|
|
|
|
case 0x20: /* DMA_COLOR_L */
|
|
*value = ch->color & 0xffff;
|
|
break;
|
|
|
|
case 0x22: /* DMA_COLOR_U */
|
|
*value = ch->color >> 16;
|
|
break;
|
|
|
|
case 0x24: /* DMA_CCR2 */
|
|
*value = (ch->bs << 2) |
|
|
(ch->transparent_copy << 1) |
|
|
ch->constant_fill;
|
|
break;
|
|
|
|
case 0x28: /* DMA_CLNK_CTRL */
|
|
*value = (ch->link_enabled << 15) |
|
|
(ch->link_next_ch & 0xf);
|
|
break;
|
|
|
|
case 0x2a: /* DMA_LCH_CTRL */
|
|
*value = (ch->interleave_disabled << 15) |
|
|
ch->type;
|
|
break;
|
|
|
|
default:
|
|
return 1;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int omap_dma_ch_reg_write(struct omap_dma_s *s,
|
|
struct omap_dma_channel_s *ch, int reg, uint16_t value)
|
|
{
|
|
switch (reg) {
|
|
case 0x00: /* SYS_DMA_CSDP_CH0 */
|
|
ch->burst[1] = (value & 0xc000) >> 14;
|
|
ch->pack[1] = (value & 0x2000) >> 13;
|
|
ch->port[1] = (enum omap_dma_port) ((value & 0x1e00) >> 9);
|
|
ch->burst[0] = (value & 0x0180) >> 7;
|
|
ch->pack[0] = (value & 0x0040) >> 6;
|
|
ch->port[0] = (enum omap_dma_port) ((value & 0x003c) >> 2);
|
|
if (ch->port[0] >= __omap_dma_port_last) {
|
|
qemu_log_mask(LOG_GUEST_ERROR, "%s: invalid DMA port %i\n",
|
|
__func__, ch->port[0]);
|
|
}
|
|
if (ch->port[1] >= __omap_dma_port_last) {
|
|
qemu_log_mask(LOG_GUEST_ERROR, "%s: invalid DMA port %i\n",
|
|
__func__, ch->port[1]);
|
|
}
|
|
ch->data_type = 1 << (value & 3);
|
|
if ((value & 3) == 3) {
|
|
qemu_log_mask(LOG_GUEST_ERROR,
|
|
"%s: bad data_type for DMA channel\n", __func__);
|
|
ch->data_type >>= 1;
|
|
}
|
|
break;
|
|
|
|
case 0x02: /* SYS_DMA_CCR_CH0 */
|
|
ch->mode[1] = (omap_dma_addressing_t) ((value & 0xc000) >> 14);
|
|
ch->mode[0] = (omap_dma_addressing_t) ((value & 0x3000) >> 12);
|
|
ch->end_prog = (value & 0x0800) >> 11;
|
|
if (s->model >= omap_dma_3_2)
|
|
ch->omap_3_1_compatible_disable = (value >> 10) & 0x1;
|
|
ch->repeat = (value & 0x0200) >> 9;
|
|
ch->auto_init = (value & 0x0100) >> 8;
|
|
ch->priority = (value & 0x0040) >> 6;
|
|
ch->fs = (value & 0x0020) >> 5;
|
|
ch->sync = value & 0x001f;
|
|
|
|
if (value & 0x0080)
|
|
omap_dma_enable_channel(s, ch);
|
|
else
|
|
omap_dma_disable_channel(s, ch);
|
|
|
|
if (ch->end_prog)
|
|
omap_dma_channel_end_prog(s, ch);
|
|
|
|
break;
|
|
|
|
case 0x04: /* SYS_DMA_CICR_CH0 */
|
|
ch->interrupts = value & 0x3f;
|
|
break;
|
|
|
|
case 0x06: /* SYS_DMA_CSR_CH0 */
|
|
OMAP_RO_REG((hwaddr) reg);
|
|
break;
|
|
|
|
case 0x08: /* SYS_DMA_CSSA_L_CH0 */
|
|
ch->addr[0] &= 0xffff0000;
|
|
ch->addr[0] |= value;
|
|
break;
|
|
|
|
case 0x0a: /* SYS_DMA_CSSA_U_CH0 */
|
|
ch->addr[0] &= 0x0000ffff;
|
|
ch->addr[0] |= (uint32_t) value << 16;
|
|
break;
|
|
|
|
case 0x0c: /* SYS_DMA_CDSA_L_CH0 */
|
|
ch->addr[1] &= 0xffff0000;
|
|
ch->addr[1] |= value;
|
|
break;
|
|
|
|
case 0x0e: /* SYS_DMA_CDSA_U_CH0 */
|
|
ch->addr[1] &= 0x0000ffff;
|
|
ch->addr[1] |= (uint32_t) value << 16;
|
|
break;
|
|
|
|
case 0x10: /* SYS_DMA_CEN_CH0 */
|
|
ch->elements = value;
|
|
break;
|
|
|
|
case 0x12: /* SYS_DMA_CFN_CH0 */
|
|
ch->frames = value;
|
|
break;
|
|
|
|
case 0x14: /* SYS_DMA_CFI_CH0 */
|
|
ch->frame_index[0] = (int16_t) value;
|
|
break;
|
|
|
|
case 0x16: /* SYS_DMA_CEI_CH0 */
|
|
ch->element_index[0] = (int16_t) value;
|
|
break;
|
|
|
|
case 0x18: /* SYS_DMA_CPC_CH0 or DMA_CSAC */
|
|
OMAP_RO_REG((hwaddr) reg);
|
|
break;
|
|
|
|
case 0x1c: /* DMA_CDEI */
|
|
ch->element_index[1] = (int16_t) value;
|
|
break;
|
|
|
|
case 0x1e: /* DMA_CDFI */
|
|
ch->frame_index[1] = (int16_t) value;
|
|
break;
|
|
|
|
case 0x20: /* DMA_COLOR_L */
|
|
ch->color &= 0xffff0000;
|
|
ch->color |= value;
|
|
break;
|
|
|
|
case 0x22: /* DMA_COLOR_U */
|
|
ch->color &= 0xffff;
|
|
ch->color |= (uint32_t)value << 16;
|
|
break;
|
|
|
|
case 0x24: /* DMA_CCR2 */
|
|
ch->bs = (value >> 2) & 0x1;
|
|
ch->transparent_copy = (value >> 1) & 0x1;
|
|
ch->constant_fill = value & 0x1;
|
|
break;
|
|
|
|
case 0x28: /* DMA_CLNK_CTRL */
|
|
ch->link_enabled = (value >> 15) & 0x1;
|
|
if (value & (1 << 14)) { /* Stop_Lnk */
|
|
ch->link_enabled = 0;
|
|
omap_dma_disable_channel(s, ch);
|
|
}
|
|
ch->link_next_ch = value & 0x1f;
|
|
break;
|
|
|
|
case 0x2a: /* DMA_LCH_CTRL */
|
|
ch->interleave_disabled = (value >> 15) & 0x1;
|
|
ch->type = value & 0xf;
|
|
break;
|
|
|
|
default:
|
|
return 1;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int omap_dma_3_2_lcd_write(struct omap_dma_lcd_channel_s *s, int offset,
|
|
uint16_t value)
|
|
{
|
|
switch (offset) {
|
|
case 0xbc0: /* DMA_LCD_CSDP */
|
|
s->brust_f2 = (value >> 14) & 0x3;
|
|
s->pack_f2 = (value >> 13) & 0x1;
|
|
s->data_type_f2 = (1 << ((value >> 11) & 0x3));
|
|
s->brust_f1 = (value >> 7) & 0x3;
|
|
s->pack_f1 = (value >> 6) & 0x1;
|
|
s->data_type_f1 = (1 << ((value >> 0) & 0x3));
|
|
break;
|
|
|
|
case 0xbc2: /* DMA_LCD_CCR */
|
|
s->mode_f2 = (value >> 14) & 0x3;
|
|
s->mode_f1 = (value >> 12) & 0x3;
|
|
s->end_prog = (value >> 11) & 0x1;
|
|
s->omap_3_1_compatible_disable = (value >> 10) & 0x1;
|
|
s->repeat = (value >> 9) & 0x1;
|
|
s->auto_init = (value >> 8) & 0x1;
|
|
s->running = (value >> 7) & 0x1;
|
|
s->priority = (value >> 6) & 0x1;
|
|
s->bs = (value >> 4) & 0x1;
|
|
break;
|
|
|
|
case 0xbc4: /* DMA_LCD_CTRL */
|
|
s->dst = (value >> 8) & 0x1;
|
|
s->src = ((value >> 6) & 0x3) << 1;
|
|
s->condition = 0;
|
|
/* Assume no bus errors and thus no BUS_ERROR irq bits. */
|
|
s->interrupts = (value >> 1) & 1;
|
|
s->dual = value & 1;
|
|
break;
|
|
|
|
case 0xbc8: /* TOP_B1_L */
|
|
s->src_f1_top &= 0xffff0000;
|
|
s->src_f1_top |= 0x0000ffff & value;
|
|
break;
|
|
|
|
case 0xbca: /* TOP_B1_U */
|
|
s->src_f1_top &= 0x0000ffff;
|
|
s->src_f1_top |= (uint32_t)value << 16;
|
|
break;
|
|
|
|
case 0xbcc: /* BOT_B1_L */
|
|
s->src_f1_bottom &= 0xffff0000;
|
|
s->src_f1_bottom |= 0x0000ffff & value;
|
|
break;
|
|
|
|
case 0xbce: /* BOT_B1_U */
|
|
s->src_f1_bottom &= 0x0000ffff;
|
|
s->src_f1_bottom |= (uint32_t) value << 16;
|
|
break;
|
|
|
|
case 0xbd0: /* TOP_B2_L */
|
|
s->src_f2_top &= 0xffff0000;
|
|
s->src_f2_top |= 0x0000ffff & value;
|
|
break;
|
|
|
|
case 0xbd2: /* TOP_B2_U */
|
|
s->src_f2_top &= 0x0000ffff;
|
|
s->src_f2_top |= (uint32_t) value << 16;
|
|
break;
|
|
|
|
case 0xbd4: /* BOT_B2_L */
|
|
s->src_f2_bottom &= 0xffff0000;
|
|
s->src_f2_bottom |= 0x0000ffff & value;
|
|
break;
|
|
|
|
case 0xbd6: /* BOT_B2_U */
|
|
s->src_f2_bottom &= 0x0000ffff;
|
|
s->src_f2_bottom |= (uint32_t) value << 16;
|
|
break;
|
|
|
|
case 0xbd8: /* DMA_LCD_SRC_EI_B1 */
|
|
s->element_index_f1 = value;
|
|
break;
|
|
|
|
case 0xbda: /* DMA_LCD_SRC_FI_B1_L */
|
|
s->frame_index_f1 &= 0xffff0000;
|
|
s->frame_index_f1 |= 0x0000ffff & value;
|
|
break;
|
|
|
|
case 0xbf4: /* DMA_LCD_SRC_FI_B1_U */
|
|
s->frame_index_f1 &= 0x0000ffff;
|
|
s->frame_index_f1 |= (uint32_t) value << 16;
|
|
break;
|
|
|
|
case 0xbdc: /* DMA_LCD_SRC_EI_B2 */
|
|
s->element_index_f2 = value;
|
|
break;
|
|
|
|
case 0xbde: /* DMA_LCD_SRC_FI_B2_L */
|
|
s->frame_index_f2 &= 0xffff0000;
|
|
s->frame_index_f2 |= 0x0000ffff & value;
|
|
break;
|
|
|
|
case 0xbf6: /* DMA_LCD_SRC_FI_B2_U */
|
|
s->frame_index_f2 &= 0x0000ffff;
|
|
s->frame_index_f2 |= (uint32_t) value << 16;
|
|
break;
|
|
|
|
case 0xbe0: /* DMA_LCD_SRC_EN_B1 */
|
|
s->elements_f1 = value;
|
|
break;
|
|
|
|
case 0xbe4: /* DMA_LCD_SRC_FN_B1 */
|
|
s->frames_f1 = value;
|
|
break;
|
|
|
|
case 0xbe2: /* DMA_LCD_SRC_EN_B2 */
|
|
s->elements_f2 = value;
|
|
break;
|
|
|
|
case 0xbe6: /* DMA_LCD_SRC_FN_B2 */
|
|
s->frames_f2 = value;
|
|
break;
|
|
|
|
case 0xbea: /* DMA_LCD_LCH_CTRL */
|
|
s->lch_type = value & 0xf;
|
|
break;
|
|
|
|
default:
|
|
return 1;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int omap_dma_3_2_lcd_read(struct omap_dma_lcd_channel_s *s, int offset,
|
|
uint16_t *ret)
|
|
{
|
|
switch (offset) {
|
|
case 0xbc0: /* DMA_LCD_CSDP */
|
|
*ret = (s->brust_f2 << 14) |
|
|
(s->pack_f2 << 13) |
|
|
((s->data_type_f2 >> 1) << 11) |
|
|
(s->brust_f1 << 7) |
|
|
(s->pack_f1 << 6) |
|
|
((s->data_type_f1 >> 1) << 0);
|
|
break;
|
|
|
|
case 0xbc2: /* DMA_LCD_CCR */
|
|
*ret = (s->mode_f2 << 14) |
|
|
(s->mode_f1 << 12) |
|
|
(s->end_prog << 11) |
|
|
(s->omap_3_1_compatible_disable << 10) |
|
|
(s->repeat << 9) |
|
|
(s->auto_init << 8) |
|
|
(s->running << 7) |
|
|
(s->priority << 6) |
|
|
(s->bs << 4);
|
|
break;
|
|
|
|
case 0xbc4: /* DMA_LCD_CTRL */
|
|
qemu_irq_lower(s->irq);
|
|
*ret = (s->dst << 8) |
|
|
((s->src & 0x6) << 5) |
|
|
(s->condition << 3) |
|
|
(s->interrupts << 1) |
|
|
s->dual;
|
|
break;
|
|
|
|
case 0xbc8: /* TOP_B1_L */
|
|
*ret = s->src_f1_top & 0xffff;
|
|
break;
|
|
|
|
case 0xbca: /* TOP_B1_U */
|
|
*ret = s->src_f1_top >> 16;
|
|
break;
|
|
|
|
case 0xbcc: /* BOT_B1_L */
|
|
*ret = s->src_f1_bottom & 0xffff;
|
|
break;
|
|
|
|
case 0xbce: /* BOT_B1_U */
|
|
*ret = s->src_f1_bottom >> 16;
|
|
break;
|
|
|
|
case 0xbd0: /* TOP_B2_L */
|
|
*ret = s->src_f2_top & 0xffff;
|
|
break;
|
|
|
|
case 0xbd2: /* TOP_B2_U */
|
|
*ret = s->src_f2_top >> 16;
|
|
break;
|
|
|
|
case 0xbd4: /* BOT_B2_L */
|
|
*ret = s->src_f2_bottom & 0xffff;
|
|
break;
|
|
|
|
case 0xbd6: /* BOT_B2_U */
|
|
*ret = s->src_f2_bottom >> 16;
|
|
break;
|
|
|
|
case 0xbd8: /* DMA_LCD_SRC_EI_B1 */
|
|
*ret = s->element_index_f1;
|
|
break;
|
|
|
|
case 0xbda: /* DMA_LCD_SRC_FI_B1_L */
|
|
*ret = s->frame_index_f1 & 0xffff;
|
|
break;
|
|
|
|
case 0xbf4: /* DMA_LCD_SRC_FI_B1_U */
|
|
*ret = s->frame_index_f1 >> 16;
|
|
break;
|
|
|
|
case 0xbdc: /* DMA_LCD_SRC_EI_B2 */
|
|
*ret = s->element_index_f2;
|
|
break;
|
|
|
|
case 0xbde: /* DMA_LCD_SRC_FI_B2_L */
|
|
*ret = s->frame_index_f2 & 0xffff;
|
|
break;
|
|
|
|
case 0xbf6: /* DMA_LCD_SRC_FI_B2_U */
|
|
*ret = s->frame_index_f2 >> 16;
|
|
break;
|
|
|
|
case 0xbe0: /* DMA_LCD_SRC_EN_B1 */
|
|
*ret = s->elements_f1;
|
|
break;
|
|
|
|
case 0xbe4: /* DMA_LCD_SRC_FN_B1 */
|
|
*ret = s->frames_f1;
|
|
break;
|
|
|
|
case 0xbe2: /* DMA_LCD_SRC_EN_B2 */
|
|
*ret = s->elements_f2;
|
|
break;
|
|
|
|
case 0xbe6: /* DMA_LCD_SRC_FN_B2 */
|
|
*ret = s->frames_f2;
|
|
break;
|
|
|
|
case 0xbea: /* DMA_LCD_LCH_CTRL */
|
|
*ret = s->lch_type;
|
|
break;
|
|
|
|
default:
|
|
return 1;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int omap_dma_3_1_lcd_write(struct omap_dma_lcd_channel_s *s, int offset,
|
|
uint16_t value)
|
|
{
|
|
switch (offset) {
|
|
case 0x300: /* SYS_DMA_LCD_CTRL */
|
|
s->src = (value & 0x40) ? imif : emiff;
|
|
s->condition = 0;
|
|
/* Assume no bus errors and thus no BUS_ERROR irq bits. */
|
|
s->interrupts = (value >> 1) & 1;
|
|
s->dual = value & 1;
|
|
break;
|
|
|
|
case 0x302: /* SYS_DMA_LCD_TOP_F1_L */
|
|
s->src_f1_top &= 0xffff0000;
|
|
s->src_f1_top |= 0x0000ffff & value;
|
|
break;
|
|
|
|
case 0x304: /* SYS_DMA_LCD_TOP_F1_U */
|
|
s->src_f1_top &= 0x0000ffff;
|
|
s->src_f1_top |= (uint32_t)value << 16;
|
|
break;
|
|
|
|
case 0x306: /* SYS_DMA_LCD_BOT_F1_L */
|
|
s->src_f1_bottom &= 0xffff0000;
|
|
s->src_f1_bottom |= 0x0000ffff & value;
|
|
break;
|
|
|
|
case 0x308: /* SYS_DMA_LCD_BOT_F1_U */
|
|
s->src_f1_bottom &= 0x0000ffff;
|
|
s->src_f1_bottom |= (uint32_t)value << 16;
|
|
break;
|
|
|
|
case 0x30a: /* SYS_DMA_LCD_TOP_F2_L */
|
|
s->src_f2_top &= 0xffff0000;
|
|
s->src_f2_top |= 0x0000ffff & value;
|
|
break;
|
|
|
|
case 0x30c: /* SYS_DMA_LCD_TOP_F2_U */
|
|
s->src_f2_top &= 0x0000ffff;
|
|
s->src_f2_top |= (uint32_t)value << 16;
|
|
break;
|
|
|
|
case 0x30e: /* SYS_DMA_LCD_BOT_F2_L */
|
|
s->src_f2_bottom &= 0xffff0000;
|
|
s->src_f2_bottom |= 0x0000ffff & value;
|
|
break;
|
|
|
|
case 0x310: /* SYS_DMA_LCD_BOT_F2_U */
|
|
s->src_f2_bottom &= 0x0000ffff;
|
|
s->src_f2_bottom |= (uint32_t)value << 16;
|
|
break;
|
|
|
|
default:
|
|
return 1;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int omap_dma_3_1_lcd_read(struct omap_dma_lcd_channel_s *s, int offset,
|
|
uint16_t *ret)
|
|
{
|
|
int i;
|
|
|
|
switch (offset) {
|
|
case 0x300: /* SYS_DMA_LCD_CTRL */
|
|
i = s->condition;
|
|
s->condition = 0;
|
|
qemu_irq_lower(s->irq);
|
|
*ret = ((s->src == imif) << 6) | (i << 3) |
|
|
(s->interrupts << 1) | s->dual;
|
|
break;
|
|
|
|
case 0x302: /* SYS_DMA_LCD_TOP_F1_L */
|
|
*ret = s->src_f1_top & 0xffff;
|
|
break;
|
|
|
|
case 0x304: /* SYS_DMA_LCD_TOP_F1_U */
|
|
*ret = s->src_f1_top >> 16;
|
|
break;
|
|
|
|
case 0x306: /* SYS_DMA_LCD_BOT_F1_L */
|
|
*ret = s->src_f1_bottom & 0xffff;
|
|
break;
|
|
|
|
case 0x308: /* SYS_DMA_LCD_BOT_F1_U */
|
|
*ret = s->src_f1_bottom >> 16;
|
|
break;
|
|
|
|
case 0x30a: /* SYS_DMA_LCD_TOP_F2_L */
|
|
*ret = s->src_f2_top & 0xffff;
|
|
break;
|
|
|
|
case 0x30c: /* SYS_DMA_LCD_TOP_F2_U */
|
|
*ret = s->src_f2_top >> 16;
|
|
break;
|
|
|
|
case 0x30e: /* SYS_DMA_LCD_BOT_F2_L */
|
|
*ret = s->src_f2_bottom & 0xffff;
|
|
break;
|
|
|
|
case 0x310: /* SYS_DMA_LCD_BOT_F2_U */
|
|
*ret = s->src_f2_bottom >> 16;
|
|
break;
|
|
|
|
default:
|
|
return 1;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int omap_dma_sys_write(struct omap_dma_s *s, int offset, uint16_t value)
|
|
{
|
|
switch (offset) {
|
|
case 0x400: /* SYS_DMA_GCR */
|
|
s->gcr = value;
|
|
break;
|
|
|
|
case 0x404: /* DMA_GSCR */
|
|
if (value & 0x8)
|
|
omap_dma_disable_3_1_mapping(s);
|
|
else
|
|
omap_dma_enable_3_1_mapping(s);
|
|
break;
|
|
|
|
case 0x408: /* DMA_GRST */
|
|
if (value & 0x1)
|
|
omap_dma_reset(s->dma);
|
|
break;
|
|
|
|
default:
|
|
return 1;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int omap_dma_sys_read(struct omap_dma_s *s, int offset,
|
|
uint16_t *ret)
|
|
{
|
|
switch (offset) {
|
|
case 0x400: /* SYS_DMA_GCR */
|
|
*ret = s->gcr;
|
|
break;
|
|
|
|
case 0x404: /* DMA_GSCR */
|
|
*ret = s->omap_3_1_mapping_disabled << 3;
|
|
break;
|
|
|
|
case 0x408: /* DMA_GRST */
|
|
*ret = 0;
|
|
break;
|
|
|
|
case 0x442: /* DMA_HW_ID */
|
|
case 0x444: /* DMA_PCh2_ID */
|
|
case 0x446: /* DMA_PCh0_ID */
|
|
case 0x448: /* DMA_PCh1_ID */
|
|
case 0x44a: /* DMA_PChG_ID */
|
|
case 0x44c: /* DMA_PChD_ID */
|
|
*ret = 1;
|
|
break;
|
|
|
|
case 0x44e: /* DMA_CAPS_0_U */
|
|
*ret = (s->caps[0] >> 16) & 0xffff;
|
|
break;
|
|
case 0x450: /* DMA_CAPS_0_L */
|
|
*ret = (s->caps[0] >> 0) & 0xffff;
|
|
break;
|
|
|
|
case 0x452: /* DMA_CAPS_1_U */
|
|
*ret = (s->caps[1] >> 16) & 0xffff;
|
|
break;
|
|
case 0x454: /* DMA_CAPS_1_L */
|
|
*ret = (s->caps[1] >> 0) & 0xffff;
|
|
break;
|
|
|
|
case 0x456: /* DMA_CAPS_2 */
|
|
*ret = s->caps[2];
|
|
break;
|
|
|
|
case 0x458: /* DMA_CAPS_3 */
|
|
*ret = s->caps[3];
|
|
break;
|
|
|
|
case 0x45a: /* DMA_CAPS_4 */
|
|
*ret = s->caps[4];
|
|
break;
|
|
|
|
case 0x460: /* DMA_PCh2_SR */
|
|
case 0x480: /* DMA_PCh0_SR */
|
|
case 0x482: /* DMA_PCh1_SR */
|
|
case 0x4c0: /* DMA_PChD_SR_0 */
|
|
qemu_log_mask(LOG_UNIMP,
|
|
"%s: Physical Channel Status Registers not implemented\n",
|
|
__func__);
|
|
*ret = 0xff;
|
|
break;
|
|
|
|
default:
|
|
return 1;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static uint64_t omap_dma_read(void *opaque, hwaddr addr, unsigned size)
|
|
{
|
|
struct omap_dma_s *s = opaque;
|
|
int reg, ch;
|
|
uint16_t ret;
|
|
|
|
if (size != 2) {
|
|
return omap_badwidth_read16(opaque, addr);
|
|
}
|
|
|
|
switch (addr) {
|
|
case 0x300 ... 0x3fe:
|
|
if (s->model <= omap_dma_3_1 || !s->omap_3_1_mapping_disabled) {
|
|
if (omap_dma_3_1_lcd_read(&s->lcd_ch, addr, &ret))
|
|
break;
|
|
return ret;
|
|
}
|
|
/* Fall through. */
|
|
case 0x000 ... 0x2fe:
|
|
reg = addr & 0x3f;
|
|
ch = (addr >> 6) & 0x0f;
|
|
if (omap_dma_ch_reg_read(s, &s->ch[ch], reg, &ret))
|
|
break;
|
|
return ret;
|
|
|
|
case 0x404 ... 0x4fe:
|
|
if (s->model <= omap_dma_3_1)
|
|
break;
|
|
/* Fall through. */
|
|
case 0x400:
|
|
if (omap_dma_sys_read(s, addr, &ret))
|
|
break;
|
|
return ret;
|
|
|
|
case 0xb00 ... 0xbfe:
|
|
if (s->model == omap_dma_3_2 && s->omap_3_1_mapping_disabled) {
|
|
if (omap_dma_3_2_lcd_read(&s->lcd_ch, addr, &ret))
|
|
break;
|
|
return ret;
|
|
}
|
|
break;
|
|
}
|
|
|
|
OMAP_BAD_REG(addr);
|
|
return 0;
|
|
}
|
|
|
|
static void omap_dma_write(void *opaque, hwaddr addr,
|
|
uint64_t value, unsigned size)
|
|
{
|
|
struct omap_dma_s *s = opaque;
|
|
int reg, ch;
|
|
|
|
if (size != 2) {
|
|
omap_badwidth_write16(opaque, addr, value);
|
|
return;
|
|
}
|
|
|
|
switch (addr) {
|
|
case 0x300 ... 0x3fe:
|
|
if (s->model <= omap_dma_3_1 || !s->omap_3_1_mapping_disabled) {
|
|
if (omap_dma_3_1_lcd_write(&s->lcd_ch, addr, value))
|
|
break;
|
|
return;
|
|
}
|
|
/* Fall through. */
|
|
case 0x000 ... 0x2fe:
|
|
reg = addr & 0x3f;
|
|
ch = (addr >> 6) & 0x0f;
|
|
if (omap_dma_ch_reg_write(s, &s->ch[ch], reg, value))
|
|
break;
|
|
return;
|
|
|
|
case 0x404 ... 0x4fe:
|
|
if (s->model <= omap_dma_3_1)
|
|
break;
|
|
/* fall through */
|
|
case 0x400:
|
|
if (omap_dma_sys_write(s, addr, value))
|
|
break;
|
|
return;
|
|
|
|
case 0xb00 ... 0xbfe:
|
|
if (s->model == omap_dma_3_2 && s->omap_3_1_mapping_disabled) {
|
|
if (omap_dma_3_2_lcd_write(&s->lcd_ch, addr, value))
|
|
break;
|
|
return;
|
|
}
|
|
break;
|
|
}
|
|
|
|
OMAP_BAD_REG(addr);
|
|
}
|
|
|
|
static const MemoryRegionOps omap_dma_ops = {
|
|
.read = omap_dma_read,
|
|
.write = omap_dma_write,
|
|
.endianness = DEVICE_NATIVE_ENDIAN,
|
|
};
|
|
|
|
static void omap_dma_request(void *opaque, int drq, int req)
|
|
{
|
|
struct omap_dma_s *s = opaque;
|
|
/* The request pins are level triggered in QEMU. */
|
|
if (req) {
|
|
if (~s->dma->drqbmp & (1ULL << drq)) {
|
|
s->dma->drqbmp |= 1ULL << drq;
|
|
omap_dma_process_request(s, drq);
|
|
}
|
|
} else
|
|
s->dma->drqbmp &= ~(1ULL << drq);
|
|
}
|
|
|
|
/* XXX: this won't be needed once soc_dma knows about clocks. */
|
|
static void omap_dma_clk_update(void *opaque, int line, int on)
|
|
{
|
|
struct omap_dma_s *s = opaque;
|
|
int i;
|
|
|
|
s->dma->freq = omap_clk_getrate(s->clk);
|
|
|
|
for (i = 0; i < s->chans; i ++)
|
|
if (s->ch[i].active)
|
|
soc_dma_set_request(s->ch[i].dma, on);
|
|
}
|
|
|
|
static void omap_dma_setcaps(struct omap_dma_s *s)
|
|
{
|
|
switch (s->model) {
|
|
default:
|
|
case omap_dma_3_1:
|
|
break;
|
|
case omap_dma_3_2:
|
|
/* XXX Only available for sDMA */
|
|
s->caps[0] =
|
|
(1 << 19) | /* Constant Fill Capability */
|
|
(1 << 18); /* Transparent BLT Capability */
|
|
s->caps[1] =
|
|
(1 << 1); /* 1-bit palettized capability (DMA 3.2 only) */
|
|
s->caps[2] =
|
|
(1 << 8) | /* SEPARATE_SRC_AND_DST_INDEX_CPBLTY */
|
|
(1 << 7) | /* DST_DOUBLE_INDEX_ADRS_CPBLTY */
|
|
(1 << 6) | /* DST_SINGLE_INDEX_ADRS_CPBLTY */
|
|
(1 << 5) | /* DST_POST_INCRMNT_ADRS_CPBLTY */
|
|
(1 << 4) | /* DST_CONST_ADRS_CPBLTY */
|
|
(1 << 3) | /* SRC_DOUBLE_INDEX_ADRS_CPBLTY */
|
|
(1 << 2) | /* SRC_SINGLE_INDEX_ADRS_CPBLTY */
|
|
(1 << 1) | /* SRC_POST_INCRMNT_ADRS_CPBLTY */
|
|
(1 << 0); /* SRC_CONST_ADRS_CPBLTY */
|
|
s->caps[3] =
|
|
(1 << 6) | /* BLOCK_SYNCHR_CPBLTY (DMA 4 only) */
|
|
(1 << 7) | /* PKT_SYNCHR_CPBLTY (DMA 4 only) */
|
|
(1 << 5) | /* CHANNEL_CHAINING_CPBLTY */
|
|
(1 << 4) | /* LCh_INTERLEAVE_CPBLTY */
|
|
(1 << 3) | /* AUTOINIT_REPEAT_CPBLTY (DMA 3.2 only) */
|
|
(1 << 2) | /* AUTOINIT_ENDPROG_CPBLTY (DMA 3.2 only) */
|
|
(1 << 1) | /* FRAME_SYNCHR_CPBLTY */
|
|
(1 << 0); /* ELMNT_SYNCHR_CPBLTY */
|
|
s->caps[4] =
|
|
(1 << 7) | /* PKT_INTERRUPT_CPBLTY (DMA 4 only) */
|
|
(1 << 6) | /* SYNC_STATUS_CPBLTY */
|
|
(1 << 5) | /* BLOCK_INTERRUPT_CPBLTY */
|
|
(1 << 4) | /* LAST_FRAME_INTERRUPT_CPBLTY */
|
|
(1 << 3) | /* FRAME_INTERRUPT_CPBLTY */
|
|
(1 << 2) | /* HALF_FRAME_INTERRUPT_CPBLTY */
|
|
(1 << 1) | /* EVENT_DROP_INTERRUPT_CPBLTY */
|
|
(1 << 0); /* TIMEOUT_INTERRUPT_CPBLTY (DMA 3.2 only) */
|
|
break;
|
|
}
|
|
}
|
|
|
|
struct soc_dma_s *omap_dma_init(hwaddr base, qemu_irq *irqs,
|
|
MemoryRegion *sysmem,
|
|
qemu_irq lcd_irq, struct omap_mpu_state_s *mpu, omap_clk clk,
|
|
enum omap_dma_model model)
|
|
{
|
|
int num_irqs, memsize, i;
|
|
struct omap_dma_s *s = g_new0(struct omap_dma_s, 1);
|
|
|
|
if (model <= omap_dma_3_1) {
|
|
num_irqs = 6;
|
|
memsize = 0x800;
|
|
} else {
|
|
num_irqs = 16;
|
|
memsize = 0xc00;
|
|
}
|
|
s->model = model;
|
|
s->mpu = mpu;
|
|
s->clk = clk;
|
|
s->lcd_ch.irq = lcd_irq;
|
|
s->lcd_ch.mpu = mpu;
|
|
|
|
s->dma = soc_dma_init((model <= omap_dma_3_1) ? 9 : 16);
|
|
s->dma->freq = omap_clk_getrate(clk);
|
|
s->dma->transfer_fn = omap_dma_transfer_generic;
|
|
s->dma->setup_fn = omap_dma_transfer_setup;
|
|
s->dma->drq = qemu_allocate_irqs(omap_dma_request, s, 32);
|
|
s->dma->opaque = s;
|
|
|
|
while (num_irqs --)
|
|
s->ch[num_irqs].irq = irqs[num_irqs];
|
|
for (i = 0; i < 3; i ++) {
|
|
s->ch[i].sibling = &s->ch[i + 6];
|
|
s->ch[i + 6].sibling = &s->ch[i];
|
|
}
|
|
for (i = (model <= omap_dma_3_1) ? 8 : 15; i >= 0; i --) {
|
|
s->ch[i].dma = &s->dma->ch[i];
|
|
s->dma->ch[i].opaque = &s->ch[i];
|
|
}
|
|
|
|
omap_dma_setcaps(s);
|
|
omap_clk_adduser(s->clk, qemu_allocate_irq(omap_dma_clk_update, s, 0));
|
|
omap_dma_reset(s->dma);
|
|
omap_dma_clk_update(s, 0, 1);
|
|
|
|
memory_region_init_io(&s->iomem, NULL, &omap_dma_ops, s, "omap.dma", memsize);
|
|
memory_region_add_subregion(sysmem, base, &s->iomem);
|
|
|
|
mpu->drq = s->dma->drq;
|
|
|
|
return s->dma;
|
|
}
|
|
|
|
struct omap_dma_lcd_channel_s *omap_dma_get_lcdch(struct soc_dma_s *dma)
|
|
{
|
|
struct omap_dma_s *s = dma->opaque;
|
|
|
|
return &s->lcd_ch;
|
|
}
|