mirrors/qemu
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
61de4c6808
qemu/tests/qemu-iotests/051.pc.out
Kevin Wolf 61de4c6808 block: Remove BDRV_O_CACHE_WB 
The previous patches have successively made blk->enable_write_cache the
true source for the information whether a writethrough mode must be
implemented. The corresponding BDRV_O_CACHE_WB is only useless baggage
we're carrying around, so now's the time to remove it.

At the same time, we remove the 'cache.writeback' option parsing on the
BDS level as the only effect was setting the BDRV_O_CACHE_WB flag.

This change requires test cases that explicitly enabled the option to
drop it. Other than that and the change of the error message when
writethrough is enabled on the BDS level (from "Can't set writethrough
mode" to "doesn't support the option"), there should be no change in
behaviour.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
2016-03-30 12:16:03 +02:00

526 lines
56 KiB
Plaintext
Raw Blame History

This file contains invisible Unicode characters

This file contains invisible Unicode characters that are indistinguishable to humans but may be processed differently by a computer. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

QA output created by 051
Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=134217728
Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=134217728 backing_file=TEST_DIR/t.IMGFMT.base
=== Unknown option ===
Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,unknown_opt=,if=none,id=drive0
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=qcow2,unknown_opt=,if=none,id=drive0: Block format 'qcow2' does not support the option 'unknown_opt'
Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,unknown_opt=on,if=none,id=drive0
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=qcow2,unknown_opt=on,if=none,id=drive0: Block format 'qcow2' does not support the option 'unknown_opt'
Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,unknown_opt=1234,if=none,id=drive0
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=qcow2,unknown_opt=1234,if=none,id=drive0: Block format 'qcow2' does not support the option 'unknown_opt'
Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,unknown_opt=foo,if=none,id=drive0
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=qcow2,unknown_opt=foo,if=none,id=drive0: Block format 'qcow2' does not support the option 'unknown_opt'
=== Unknown protocol option ===
Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,file.unknown_opt=
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=qcow2,file.unknown_opt=: Block protocol 'file' doesn't support the option 'unknown_opt'
Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,file.unknown_opt=on
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=qcow2,file.unknown_opt=on: Block protocol 'file' doesn't support the option 'unknown_opt'
Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,file.unknown_opt=1234
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=qcow2,file.unknown_opt=1234: Block protocol 'file' doesn't support the option 'unknown_opt'
Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,file.unknown_opt=foo
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=qcow2,file.unknown_opt=foo: Block protocol 'file' doesn't support the option 'unknown_opt'
=== Invalid format ===
Testing: -drive file=TEST_DIR/t.qcow2,format=foo
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=foo: Unknown driver 'foo'
Testing: -drive file=TEST_DIR/t.qcow2,driver=foo
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,driver=foo: Unknown driver 'foo'
Testing: -drive file=TEST_DIR/t.qcow2,driver=raw,format=qcow2
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,driver=raw,format=qcow2: Cannot specify both 'driver' and 'format'
Testing: -drive file=TEST_DIR/t.qcow2,driver=qcow2,format=qcow2
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,driver=qcow2,format=qcow2: Cannot specify both 'driver' and 'format'
=== Device without drive ===
Testing: -device virtio-scsi-pci -device scsi-hd
QEMU X.Y.Z monitor - type 'help' for more information
(qemu) QEMU_PROG: -device scsi-hd: drive property not set
=== Overriding backing file ===
Testing: -drive file=TEST_DIR/t.qcow2,driver=qcow2,backing.file.filename=TEST_DIR/t.qcow2.orig,if=none,id=drive0 -nodefaults
QEMU X.Y.Z monitor - type 'help' for more information
(qemu) iininfinfoinfo info binfo blinfo bloinfo blocinfo block
drive0 (NODE_NAME): TEST_DIR/t.qcow2 (qcow2)
Removable device: not locked, tray closed
Cache mode: writeback
Backing file: TEST_DIR/t.qcow2.orig (chain depth: 1)
(qemu) qququiquit
Testing: -drive file=TEST_DIR/t.qcow2,driver=raw,backing.file.filename=TEST_DIR/t.qcow2.orig
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,driver=raw,backing.file.filename=TEST_DIR/t.qcow2.orig: Driver doesn't support backing files
Testing: -drive file=TEST_DIR/t.qcow2,file.backing.driver=file,file.backing.filename=TEST_DIR/t.qcow2.orig
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,file.backing.driver=file,file.backing.filename=TEST_DIR/t.qcow2.orig: Driver doesn't support backing files
Testing: -drive file=TEST_DIR/t.qcow2,file.backing.driver=qcow2,file.backing.file.filename=TEST_DIR/t.qcow2.orig
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,file.backing.driver=qcow2,file.backing.file.filename=TEST_DIR/t.qcow2.orig: Driver doesn't support backing files
=== Enable and disable lazy refcounting on the command line, plus some invalid values ===
Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,lazy-refcounts=on
QEMU X.Y.Z monitor - type 'help' for more information
(qemu) qququiquit
Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,lazy-refcounts=off
QEMU X.Y.Z monitor - type 'help' for more information
(qemu) qququiquit
Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,lazy-refcounts=
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=qcow2,lazy-refcounts=: Parameter 'lazy-refcounts' expects 'on' or 'off'
Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,lazy-refcounts=42
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=qcow2,lazy-refcounts=42: Parameter 'lazy-refcounts' expects 'on' or 'off'
Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,lazy-refcounts=foo
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=qcow2,lazy-refcounts=foo: Parameter 'lazy-refcounts' expects 'on' or 'off'
=== With version 2 images enabling lazy refcounts must fail ===
Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=134217728
Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,lazy-refcounts=on
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=qcow2,lazy-refcounts=on: Lazy refcounts require a qcow2 image with at least qemu 1.1 compatibility level
Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,lazy-refcounts=off
QEMU X.Y.Z monitor - type 'help' for more information
(qemu) qququiquit
=== No medium ===
Testing: -drive if=floppy
QEMU X.Y.Z monitor - type 'help' for more information
(qemu) qququiquit
Testing: -drive if=ide,media=cdrom
QEMU X.Y.Z monitor - type 'help' for more information
(qemu) qququiquit
Testing: -drive if=scsi,media=cdrom
QEMU X.Y.Z monitor - type 'help' for more information
(qemu) qququiquit
Testing: -drive if=ide
QEMU X.Y.Z monitor - type 'help' for more information
(qemu) QEMU_PROG: Device needs media, but drive is empty
QEMU_PROG: Initialization of device ide-hd failed: Device initialization failed.
Testing: -drive if=scsi
QEMU X.Y.Z monitor - type 'help' for more information
(qemu) QEMU_PROG: Initialization of device lsi53c895a failed: Device needs media, but drive is empty
Testing: -drive if=virtio
QEMU X.Y.Z monitor - type 'help' for more information
(qemu) QEMU_PROG: -drive if=virtio: Device needs media, but drive is empty
Testing: -drive if=none,id=disk -device ide-cd,drive=disk
QEMU X.Y.Z monitor - type 'help' for more information
(qemu) qququiquit
Testing: -drive if=none,id=disk -device lsi53c895a -device scsi-cd,drive=disk
QEMU X.Y.Z monitor - type 'help' for more information
(qemu) qququiquit
Testing: -drive if=none,id=disk -device ide-drive,drive=disk
QEMU X.Y.Z monitor - type 'help' for more information
(qemu) QEMU_PROG: -device ide-drive,drive=disk: Device needs media, but drive is empty
QEMU_PROG: -device ide-drive,drive=disk: Device initialization failed.
Testing: -drive if=none,id=disk -device ide-hd,drive=disk
QEMU X.Y.Z monitor - type 'help' for more information
(qemu) QEMU_PROG: -device ide-hd,drive=disk: Device needs media, but drive is empty
QEMU_PROG: -device ide-hd,drive=disk: Device initialization failed.
Testing: -drive if=none,id=disk -device lsi53c895a -device scsi-disk,drive=disk
QEMU X.Y.Z monitor - type 'help' for more information
(qemu) QEMU_PROG: -device scsi-disk,drive=disk: Device needs media, but drive is empty
Testing: -drive if=none,id=disk -device lsi53c895a -device scsi-hd,drive=disk
QEMU X.Y.Z monitor - type 'help' for more information
(qemu) QEMU_PROG: -device scsi-hd,drive=disk: Device needs media, but drive is empty
=== Read-only ===
Testing: -drive file=TEST_DIR/t.qcow2,if=floppy,readonly=on
QEMU X.Y.Z monitor - type 'help' for more information
(qemu) qququiquit
Testing: -drive file=TEST_DIR/t.qcow2,if=ide,media=cdrom,readonly=on
QEMU X.Y.Z monitor - type 'help' for more information
(qemu) qququiquit
Testing: -drive file=TEST_DIR/t.qcow2,if=scsi,media=cdrom,readonly=on
QEMU X.Y.Z monitor - type 'help' for more information
(qemu) qququiquit
Testing: -drive file=TEST_DIR/t.qcow2,if=ide,readonly=on
QEMU X.Y.Z monitor - type 'help' for more information
(qemu) QEMU_PROG: Can't use a read-only drive
QEMU_PROG: Initialization of device ide-hd failed: Device initialization failed.
Testing: -drive file=TEST_DIR/t.qcow2,if=scsi,readonly=on
QEMU X.Y.Z monitor - type 'help' for more information
(qemu) qququiquit
Testing: -drive file=TEST_DIR/t.qcow2,if=virtio,readonly=on
QEMU X.Y.Z monitor - type 'help' for more information
(qemu) qququiquit
Testing: -drive file=TEST_DIR/t.qcow2,if=none,id=disk,readonly=on -device ide-cd,drive=disk
QEMU X.Y.Z monitor - type 'help' for more information
(qemu) qququiquit
Testing: -drive file=TEST_DIR/t.qcow2,if=none,id=disk,readonly=on -device lsi53c895a -device scsi-cd,drive=disk
QEMU X.Y.Z monitor - type 'help' for more information
(qemu) qququiquit
Testing: -drive file=TEST_DIR/t.qcow2,if=none,id=disk,readonly=on -device ide-drive,drive=disk
QEMU X.Y.Z monitor - type 'help' for more information
(qemu) QEMU_PROG: -device ide-drive,drive=disk: Can't use a read-only drive
QEMU_PROG: -device ide-drive,drive=disk: Device initialization failed.
Testing: -drive file=TEST_DIR/t.qcow2,if=none,id=disk,readonly=on -device ide-hd,drive=disk
QEMU X.Y.Z monitor - type 'help' for more information
(qemu) QEMU_PROG: -device ide-hd,drive=disk: Can't use a read-only drive
QEMU_PROG: -device ide-hd,drive=disk: Device initialization failed.
Testing: -drive file=TEST_DIR/t.qcow2,if=none,id=disk,readonly=on -device lsi53c895a -device scsi-disk,drive=disk
QEMU X.Y.Z monitor - type 'help' for more information
(qemu) qququiquit
Testing: -drive file=TEST_DIR/t.qcow2,if=none,id=disk,readonly=on -device lsi53c895a -device scsi-hd,drive=disk
QEMU X.Y.Z monitor - type 'help' for more information
(qemu) qququiquit
=== Cache modes ===
Testing: -drive driver=null-co,cache=none
QEMU X.Y.Z monitor - type 'help' for more information
(qemu) qququiquit
Testing: -drive driver=null-co,cache=directsync
QEMU X.Y.Z monitor - type 'help' for more information
(qemu) qququiquit
Testing: -drive driver=null-co,cache=writeback
QEMU X.Y.Z monitor - type 'help' for more information
(qemu) qququiquit
Testing: -drive driver=null-co,cache=writethrough
QEMU X.Y.Z monitor - type 'help' for more information
(qemu) qququiquit
Testing: -drive driver=null-co,cache=unsafe
QEMU X.Y.Z monitor - type 'help' for more information
(qemu) qququiquit
Testing: -drive driver=null-co,cache=invalid_value
QEMU_PROG: -drive driver=null-co,cache=invalid_value: invalid cache option
Testing: -drive file=TEST_DIR/t.qcow2,cache=writeback,backing.file.filename=TEST_DIR/t.qcow2.base,backing.cache.no-flush=on,backing.node-name=backing,backing.file.node-name=backing-file,file.node-name=file,if=none,id=drive0 -nodefaults
QEMU X.Y.Z monitor - type 'help' for more information
(qemu) iininfinfoinfo info binfo blinfo bloinfo blocinfo block
drive0 (NODE_NAME): TEST_DIR/t.qcow2 (qcow2)
Removable device: not locked, tray closed
Cache mode: writeback
Backing file: TEST_DIR/t.qcow2.base (chain depth: 1)
(qemu) iininfinfoinfo info binfo blinfo bloinfo blocinfo blockinfo block info block finfo block fiinfo block filinfo block file
file: TEST_DIR/t.qcow2 (file)
Cache mode: writeback
(qemu) iininfinfoinfo info binfo blinfo bloinfo blocinfo blockinfo block info block binfo block bainfo block bacinfo block backinfo block backiinfo block backininfo block backing
backing: TEST_DIR/t.qcow2.base (qcow2, read-only)
Cache mode: writeback, ignore flushes
(qemu) iininfinfoinfo info binfo blinfo bloinfo blocinfo blockinfo block info block binfo block bainfo block bacinfo block backinfo block backiinfo block backininfo block backinginfo block backing-info block backing-finfo block backing-fiinfo block backing-filinfo block backing-file
backing-file: TEST_DIR/t.qcow2.base (file, read-only)
Cache mode: writeback, ignore flushes
(qemu) qququiquit
Testing: -drive file=TEST_DIR/t.qcow2,cache=writethrough,backing.file.filename=TEST_DIR/t.qcow2.base,backing.cache.no-flush=on,backing.node-name=backing,backing.file.node-name=backing-file,file.node-name=file,if=none,id=drive0 -nodefaults
QEMU X.Y.Z monitor - type 'help' for more information
(qemu) iininfinfoinfo info binfo blinfo bloinfo blocinfo block
drive0 (NODE_NAME): TEST_DIR/t.qcow2 (qcow2)
Removable device: not locked, tray closed
Cache mode: writethrough
Backing file: TEST_DIR/t.qcow2.base (chain depth: 1)
(qemu) iininfinfoinfo info binfo blinfo bloinfo blocinfo blockinfo block info block finfo block fiinfo block filinfo block file
file: TEST_DIR/t.qcow2 (file)
Cache mode: writeback
(qemu) iininfinfoinfo info binfo blinfo bloinfo blocinfo blockinfo block info block binfo block bainfo block bacinfo block backinfo block backiinfo block backininfo block backing
backing: TEST_DIR/t.qcow2.base (qcow2, read-only)
Cache mode: writeback, ignore flushes
(qemu) iininfinfoinfo info binfo blinfo bloinfo blocinfo blockinfo block info block binfo block bainfo block bacinfo block backinfo block backiinfo block backininfo block backinginfo block backing-info block backing-finfo block backing-fiinfo block backing-filinfo block backing-file
backing-file: TEST_DIR/t.qcow2.base (file, read-only)
Cache mode: writeback, ignore flushes
(qemu) qququiquit
Testing: -drive file=TEST_DIR/t.qcow2,cache=unsafe,backing.file.filename=TEST_DIR/t.qcow2.base,backing.cache.no-flush=on,backing.node-name=backing,backing.file.node-name=backing-file,file.node-name=file,if=none,id=drive0 -nodefaults
QEMU X.Y.Z monitor - type 'help' for more information
(qemu) iininfinfoinfo info binfo blinfo bloinfo blocinfo block
drive0 (NODE_NAME): TEST_DIR/t.qcow2 (qcow2)
Removable device: not locked, tray closed
Cache mode: writeback, ignore flushes
Backing file: TEST_DIR/t.qcow2.base (chain depth: 1)
(qemu) iininfinfoinfo info binfo blinfo bloinfo blocinfo blockinfo block info block finfo block fiinfo block filinfo block file
file: TEST_DIR/t.qcow2 (file)
Cache mode: writeback, ignore flushes
(qemu) iininfinfoinfo info binfo blinfo bloinfo blocinfo blockinfo block info block binfo block bainfo block bacinfo block backinfo block backiinfo block backininfo block backing
backing: TEST_DIR/t.qcow2.base (qcow2, read-only)
Cache mode: writeback, ignore flushes
(qemu) iininfinfoinfo info binfo blinfo bloinfo blocinfo blockinfo block info block binfo block bainfo block bacinfo block backinfo block backiinfo block backininfo block backinginfo block backing-info block backing-finfo block backing-fiinfo block backing-filinfo block backing-file
backing-file: TEST_DIR/t.qcow2.base (file, read-only)
Cache mode: writeback, ignore flushes
(qemu) qququiquit
Testing: -drive file=TEST_DIR/t.qcow2,cache=invalid_value,backing.file.filename=TEST_DIR/t.qcow2.base,backing.cache.no-flush=on,backing.node-name=backing,backing.file.node-name=backing-file,file.node-name=file,if=none,id=drive0 -nodefaults
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,cache=invalid_value,backing.file.filename=TEST_DIR/t.qcow2.base,backing.cache.no-flush=on,backing.node-name=backing,backing.file.node-name=backing-file,file.node-name=file,if=none,id=drive0: invalid cache option
=== Specifying the protocol layer ===
Testing: -drive file=TEST_DIR/t.qcow2,file.driver=file
QEMU X.Y.Z monitor - type 'help' for more information
(qemu) qququiquit
=== Leaving out required options ===
Testing: -drive driver=file
QEMU_PROG: -drive driver=file: The 'file' block driver requires a file name
Testing: -drive driver=nbd
QEMU_PROG: -drive driver=nbd: one of path and host must be specified.
Testing: -drive driver=raw
QEMU_PROG: -drive driver=raw: Can't use 'raw' as a block driver for the protocol level
Testing: -drive file.driver=file
QEMU_PROG: -drive file.driver=file: The 'file' block driver requires a file name
Testing: -drive file.driver=nbd
QEMU_PROG: -drive file.driver=nbd: one of path and host must be specified.
Testing: -drive file.driver=raw
QEMU_PROG: -drive file.driver=raw: Can't use 'raw' as a block driver for the protocol level
Testing: -drive foo=bar
QEMU_PROG: -drive foo=bar: Must specify either driver or file
=== Specifying both an option and its legacy alias ===
Testing: -drive file=TEST_DIR/t.qcow2,iops=1234,throttling.iops-total=5678
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,iops=1234,throttling.iops-total=5678: 'throttling.iops-total' and its alias 'iops' can't be used at the same time
Testing: -drive file=TEST_DIR/t.qcow2,iops_rd=1234,throttling.iops-read=5678
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,iops_rd=1234,throttling.iops-read=5678: 'throttling.iops-read' and its alias 'iops_rd' can't be used at the same time
Testing: -drive file=TEST_DIR/t.qcow2,iops_wr=1234,throttling.iops-write=5678
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,iops_wr=1234,throttling.iops-write=5678: 'throttling.iops-write' and its alias 'iops_wr' can't be used at the same time
Testing: -drive file=TEST_DIR/t.qcow2,bps=1234,throttling.bps-total=5678
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,bps=1234,throttling.bps-total=5678: 'throttling.bps-total' and its alias 'bps' can't be used at the same time
Testing: -drive file=TEST_DIR/t.qcow2,bps_rd=1234,throttling.bps-read=5678
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,bps_rd=1234,throttling.bps-read=5678: 'throttling.bps-read' and its alias 'bps_rd' can't be used at the same time
Testing: -drive file=TEST_DIR/t.qcow2,bps_wr=1234,throttling.bps-write=5678
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,bps_wr=1234,throttling.bps-write=5678: 'throttling.bps-write' and its alias 'bps_wr' can't be used at the same time
Testing: -drive file=TEST_DIR/t.qcow2,iops_max=1234,throttling.iops-total-max=5678
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,iops_max=1234,throttling.iops-total-max=5678: 'throttling.iops-total-max' and its alias 'iops_max' can't be used at the same time
Testing: -drive file=TEST_DIR/t.qcow2,iops_rd_max=1234,throttling.iops-read-max=5678
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,iops_rd_max=1234,throttling.iops-read-max=5678: 'throttling.iops-read-max' and its alias 'iops_rd_max' can't be used at the same time
Testing: -drive file=TEST_DIR/t.qcow2,iops_wr_max=1234,throttling.iops-write-max=5678
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,iops_wr_max=1234,throttling.iops-write-max=5678: 'throttling.iops-write-max' and its alias 'iops_wr_max' can't be used at the same time
Testing: -drive file=TEST_DIR/t.qcow2,bps_max=1234,throttling.bps-total-max=5678
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,bps_max=1234,throttling.bps-total-max=5678: 'throttling.bps-total-max' and its alias 'bps_max' can't be used at the same time
Testing: -drive file=TEST_DIR/t.qcow2,bps_rd_max=1234,throttling.bps-read-max=5678
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,bps_rd_max=1234,throttling.bps-read-max=5678: 'throttling.bps-read-max' and its alias 'bps_rd_max' can't be used at the same time
Testing: -drive file=TEST_DIR/t.qcow2,bps_wr_max=1234,throttling.bps-write-max=5678
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,bps_wr_max=1234,throttling.bps-write-max=5678: 'throttling.bps-write-max' and its alias 'bps_wr_max' can't be used at the same time
Testing: -drive file=TEST_DIR/t.qcow2,iops_size=1234,throttling.iops-size=5678
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,iops_size=1234,throttling.iops-size=5678: 'throttling.iops-size' and its alias 'iops_size' can't be used at the same time
Testing: -drive file=TEST_DIR/t.qcow2,readonly=on,read-only=off
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,readonly=on,read-only=off: 'read-only' and its alias 'readonly' can't be used at the same time
=== Catching negative/large throttling values ===
Testing: -drive file=TEST_DIR/t.qcow2,iops=-1
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,iops=-1: bps/iops/max values must be within [0, 1000000000000000]
Testing: -drive file=TEST_DIR/t.qcow2,bps=-2
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,bps=-2: bps/iops/max values must be within [0, 1000000000000000]
Testing: -drive file=TEST_DIR/t.qcow2,bps_rd=-3
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,bps_rd=-3: bps/iops/max values must be within [0, 1000000000000000]
Testing: -drive file=TEST_DIR/t.qcow2,bps_rd_max=-3
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,bps_rd_max=-3: bps/iops/max values must be within [0, 1000000000000000]
Testing: -drive file=TEST_DIR/t.qcow2,throttling.iops-total=-4
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,throttling.iops-total=-4: bps/iops/max values must be within [0, 1000000000000000]
Testing: -drive file=TEST_DIR/t.qcow2,throttling.bps-total=-5
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,throttling.bps-total=-5: bps/iops/max values must be within [0, 1000000000000000]
Testing: -drive file=TEST_DIR/t.qcow2,bps=0
QEMU X.Y.Z monitor - type 'help' for more information
(qemu) qququiquit
Testing: -drive file=TEST_DIR/t.qcow2,bps=1
QEMU X.Y.Z monitor - type 'help' for more information
(qemu) qququiquit
Testing: -drive file=TEST_DIR/t.qcow2,bps=1000000000000000
QEMU X.Y.Z monitor - type 'help' for more information
(qemu) qququiquit
Testing: -drive file=TEST_DIR/t.qcow2,bps=1000000000000001
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,bps=1000000000000001: bps/iops/max values must be within [0, 1000000000000000]
Testing: -drive file=TEST_DIR/t.qcow2,bps=9999999999999999
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,bps=9999999999999999: bps/iops/max values must be within [0, 1000000000000000]
=== Parsing protocol from file name ===
Testing: -hda foo:bar
QEMU_PROG: -hda foo:bar: Unknown protocol 'foo'
Testing: -drive file=foo:bar
QEMU_PROG: -drive file=foo:bar: Unknown protocol 'foo'
Testing: -drive file.filename=foo:bar
QEMU_PROG: -drive file.filename=foo:bar: Could not open 'foo:bar': No such file or directory
Testing: -hda file:TEST_DIR/t.qcow2
QEMU X.Y.Z monitor - type 'help' for more information
(qemu) qququiquit
Testing: -drive file=file:TEST_DIR/t.qcow2
QEMU X.Y.Z monitor - type 'help' for more information
(qemu) qququiquit
Testing: -drive file.filename=file:TEST_DIR/t.qcow2
QEMU_PROG: -drive file.filename=file:TEST_DIR/t.qcow2: Could not open 'file:TEST_DIR/t.qcow2': No such file or directory
=== Snapshot mode ===
wrote 4096/4096 bytes at offset 0
4 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
Testing: -drive file=TEST_DIR/t.qcow2,if=none,id=drive0 -snapshot
QEMU X.Y.Z monitor - type 'help' for more information
(qemu) qqeqemqemuqemu-qemu-iqemu-ioqemu-io qemu-io dqemu-io drqemu-io driqemu-io drivqemu-io driveqemu-io drive0qemu-io drive0 qemu-io drive0 "qemu-io drive0 "wqemu-io drive0 "wrqemu-io drive0 "wriqemu-io drive0 "writqemu-io drive0 "writeqemu-io drive0 "write qemu-io drive0 "write -qemu-io drive0 "write -Pqemu-io drive0 "write -P qemu-io drive0 "write -P 0qemu-io drive0 "write -P 0xqemu-io drive0 "write -P 0x2qemu-io drive0 "write -P 0x22qemu-io drive0 "write -P 0x22 qemu-io drive0 "write -P 0x22 0qemu-io drive0 "write -P 0x22 0 qemu-io drive0 "write -P 0x22 0 4qemu-io drive0 "write -P 0x22 0 4kqemu-io drive0 "write -P 0x22 0 4k"
wrote 4096/4096 bytes at offset 0
4 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
(qemu) qququiquit
Testing: -drive file=TEST_DIR/t.qcow2,snapshot=on,if=none,id=drive0
QEMU X.Y.Z monitor - type 'help' for more information
(qemu) qqeqemqemuqemu-qemu-iqemu-ioqemu-io qemu-io dqemu-io drqemu-io driqemu-io drivqemu-io driveqemu-io drive0qemu-io drive0 qemu-io drive0 "qemu-io drive0 "wqemu-io drive0 "wrqemu-io drive0 "wriqemu-io drive0 "writqemu-io drive0 "writeqemu-io drive0 "write qemu-io drive0 "write -qemu-io drive0 "write -Pqemu-io drive0 "write -P qemu-io drive0 "write -P 0qemu-io drive0 "write -P 0xqemu-io drive0 "write -P 0x2qemu-io drive0 "write -P 0x22qemu-io drive0 "write -P 0x22 qemu-io drive0 "write -P 0x22 0qemu-io drive0 "write -P 0x22 0 qemu-io drive0 "write -P 0x22 0 4qemu-io drive0 "write -P 0x22 0 4kqemu-io drive0 "write -P 0x22 0 4k"
wrote 4096/4096 bytes at offset 0
4 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
(qemu) qququiquit
Testing: -drive file.filename=TEST_DIR/t.qcow2,driver=qcow2,snapshot=on,if=none,id=drive0
QEMU X.Y.Z monitor - type 'help' for more information
(qemu) qqeqemqemuqemu-qemu-iqemu-ioqemu-io qemu-io dqemu-io drqemu-io driqemu-io drivqemu-io driveqemu-io drive0qemu-io drive0 qemu-io drive0 "qemu-io drive0 "wqemu-io drive0 "wrqemu-io drive0 "wriqemu-io drive0 "writqemu-io drive0 "writeqemu-io drive0 "write qemu-io drive0 "write -qemu-io drive0 "write -Pqemu-io drive0 "write -P qemu-io drive0 "write -P 0qemu-io drive0 "write -P 0xqemu-io drive0 "write -P 0x2qemu-io drive0 "write -P 0x22qemu-io drive0 "write -P 0x22 qemu-io drive0 "write -P 0x22 0qemu-io drive0 "write -P 0x22 0 qemu-io drive0 "write -P 0x22 0 4qemu-io drive0 "write -P 0x22 0 4kqemu-io drive0 "write -P 0x22 0 4k"
wrote 4096/4096 bytes at offset 0
4 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
(qemu) qququiquit
Testing: -drive file.filename=TEST_DIR/t.qcow2,driver=qcow2,if=none,id=drive0 -snapshot
QEMU X.Y.Z monitor - type 'help' for more information
(qemu) qqeqemqemuqemu-qemu-iqemu-ioqemu-io qemu-io dqemu-io drqemu-io driqemu-io drivqemu-io driveqemu-io drive0qemu-io drive0 qemu-io drive0 "qemu-io drive0 "wqemu-io drive0 "wrqemu-io drive0 "wriqemu-io drive0 "writqemu-io drive0 "writeqemu-io drive0 "write qemu-io drive0 "write -qemu-io drive0 "write -Pqemu-io drive0 "write -P qemu-io drive0 "write -P 0qemu-io drive0 "write -P 0xqemu-io drive0 "write -P 0x2qemu-io drive0 "write -P 0x22qemu-io drive0 "write -P 0x22 qemu-io drive0 "write -P 0x22 0qemu-io drive0 "write -P 0x22 0 qemu-io drive0 "write -P 0x22 0 4qemu-io drive0 "write -P 0x22 0 4kqemu-io drive0 "write -P 0x22 0 4k"
wrote 4096/4096 bytes at offset 0
4 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
(qemu) qququiquit
Testing: -drive file=file:TEST_DIR/t.qcow2,if=none,id=drive0 -snapshot
QEMU X.Y.Z monitor - type 'help' for more information
(qemu) qqeqemqemuqemu-qemu-iqemu-ioqemu-io qemu-io dqemu-io drqemu-io driqemu-io drivqemu-io driveqemu-io drive0qemu-io drive0 qemu-io drive0 "qemu-io drive0 "wqemu-io drive0 "wrqemu-io drive0 "wriqemu-io drive0 "writqemu-io drive0 "writeqemu-io drive0 "write qemu-io drive0 "write -qemu-io drive0 "write -Pqemu-io drive0 "write -P qemu-io drive0 "write -P 0qemu-io drive0 "write -P 0xqemu-io drive0 "write -P 0x2qemu-io drive0 "write -P 0x22qemu-io drive0 "write -P 0x22 qemu-io drive0 "write -P 0x22 0qemu-io drive0 "write -P 0x22 0 qemu-io drive0 "write -P 0x22 0 4qemu-io drive0 "write -P 0x22 0 4kqemu-io drive0 "write -P 0x22 0 4k"
wrote 4096/4096 bytes at offset 0
4 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
(qemu) qququiquit
Testing: -drive file=file:TEST_DIR/t.qcow2,snapshot=on,if=none,id=drive0
QEMU X.Y.Z monitor - type 'help' for more information
(qemu) qqeqemqemuqemu-qemu-iqemu-ioqemu-io qemu-io dqemu-io drqemu-io driqemu-io drivqemu-io driveqemu-io drive0qemu-io drive0 qemu-io drive0 "qemu-io drive0 "wqemu-io drive0 "wrqemu-io drive0 "wriqemu-io drive0 "writqemu-io drive0 "writeqemu-io drive0 "write qemu-io drive0 "write -qemu-io drive0 "write -Pqemu-io drive0 "write -P qemu-io drive0 "write -P 0qemu-io drive0 "write -P 0xqemu-io drive0 "write -P 0x2qemu-io drive0 "write -P 0x22qemu-io drive0 "write -P 0x22 qemu-io drive0 "write -P 0x22 0qemu-io drive0 "write -P 0x22 0 qemu-io drive0 "write -P 0x22 0 4qemu-io drive0 "write -P 0x22 0 4kqemu-io drive0 "write -P 0x22 0 4k"
wrote 4096/4096 bytes at offset 0
4 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
(qemu) qququiquit
Testing: -drive file=TEST_DIR/t.qcow2,if=none,id=drive0 -snapshot
QEMU X.Y.Z monitor - type 'help' for more information
(qemu) qqeqemqemuqemu-qemu-iqemu-ioqemu-io qemu-io dqemu-io drqemu-io driqemu-io drivqemu-io driveqemu-io drive0qemu-io drive0 qemu-io drive0 "qemu-io drive0 "wqemu-io drive0 "wrqemu-io drive0 "wriqemu-io drive0 "writqemu-io drive0 "writeqemu-io drive0 "write qemu-io drive0 "write -qemu-io drive0 "write -Pqemu-io drive0 "write -P qemu-io drive0 "write -P 0qemu-io drive0 "write -P 0xqemu-io drive0 "write -P 0x2qemu-io drive0 "write -P 0x22qemu-io drive0 "write -P 0x22 qemu-io drive0 "write -P 0x22 0qemu-io drive0 "write -P 0x22 0 qemu-io drive0 "write -P 0x22 0 4qemu-io drive0 "write -P 0x22 0 4kqemu-io drive0 "write -P 0x22 0 4k"
wrote 4096/4096 bytes at offset 0
4 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
(qemu) qququiquit
Testing: -drive file=TEST_DIR/t.qcow2,snapshot=on,if=none,id=drive0
QEMU X.Y.Z monitor - type 'help' for more information
(qemu) qqeqemqemuqemu-qemu-iqemu-ioqemu-io qemu-io dqemu-io drqemu-io driqemu-io drivqemu-io driveqemu-io drive0qemu-io drive0 qemu-io drive0 "qemu-io drive0 "wqemu-io drive0 "wrqemu-io drive0 "wriqemu-io drive0 "writqemu-io drive0 "writeqemu-io drive0 "write qemu-io drive0 "write -qemu-io drive0 "write -Pqemu-io drive0 "write -P qemu-io drive0 "write -P 0qemu-io drive0 "write -P 0xqemu-io drive0 "write -P 0x2qemu-io drive0 "write -P 0x22qemu-io drive0 "write -P 0x22 qemu-io drive0 "write -P 0x22 0qemu-io drive0 "write -P 0x22 0 qemu-io drive0 "write -P 0x22 0 4qemu-io drive0 "write -P 0x22 0 4kqemu-io drive0 "write -P 0x22 0 4k"
wrote 4096/4096 bytes at offset 0
4 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
(qemu) qququiquit
read 4096/4096 bytes at offset 0
4 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
Testing: -drive file=TEST_DIR/t.qcow2,snapshot=off,if=none,id=drive0
QEMU X.Y.Z monitor - type 'help' for more information
(qemu) qqeqemqemuqemu-qemu-iqemu-ioqemu-io qemu-io dqemu-io drqemu-io driqemu-io drivqemu-io driveqemu-io drive0qemu-io drive0 qemu-io drive0 "qemu-io drive0 "wqemu-io drive0 "wrqemu-io drive0 "wriqemu-io drive0 "writqemu-io drive0 "writeqemu-io drive0 "write qemu-io drive0 "write -qemu-io drive0 "write -Pqemu-io drive0 "write -P qemu-io drive0 "write -P 0qemu-io drive0 "write -P 0xqemu-io drive0 "write -P 0x2qemu-io drive0 "write -P 0x22qemu-io drive0 "write -P 0x22 qemu-io drive0 "write -P 0x22 0qemu-io drive0 "write -P 0x22 0 qemu-io drive0 "write -P 0x22 0 4qemu-io drive0 "write -P 0x22 0 4kqemu-io drive0 "write -P 0x22 0 4k"
wrote 4096/4096 bytes at offset 0
4 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
(qemu) qququiquit
read 4096/4096 bytes at offset 0
4 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
Testing: -drive file=TEST_DIR/t.qcow2,snapshot=on,if=none,id=drive0
QEMU X.Y.Z monitor - type 'help' for more information
(qemu) qqeqemqemuqemu-qemu-iqemu-ioqemu-io qemu-io dqemu-io drqemu-io driqemu-io drivqemu-io driveqemu-io drive0qemu-io drive0 qemu-io drive0 "qemu-io drive0 "wqemu-io drive0 "wrqemu-io drive0 "wriqemu-io drive0 "writqemu-io drive0 "writeqemu-io drive0 "write qemu-io drive0 "write -qemu-io drive0 "write -Pqemu-io drive0 "write -P qemu-io drive0 "write -P 0qemu-io drive0 "write -P 0xqemu-io drive0 "write -P 0x3qemu-io drive0 "write -P 0x33qemu-io drive0 "write -P 0x33 qemu-io drive0 "write -P 0x33 0qemu-io drive0 "write -P 0x33 0 qemu-io drive0 "write -P 0x33 0 4qemu-io drive0 "write -P 0x33 0 4kqemu-io drive0 "write -P 0x33 0 4k"
wrote 4096/4096 bytes at offset 0
4 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
(qemu) ccocomcommcommicommitcommit commit dcommit drcommit dricommit drivcommit drivecommit drive0
(qemu) qququiquit
read 4096/4096 bytes at offset 0
4 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
*** done
Reference in New Issue View Git Blame Copy Permalink