qemu/include/hw/sd/allwinner-sdhost.h
Strahinja Jankovic 93e2da36ed hw/sd: Fix sun4i allwinner-sdhost for U-Boot
Trying to run U-Boot for Cubieboard (Allwinner A10) fails because it cannot
access SD card. The problem is that FIFO register in current
allwinner-sdhost implementation is at the address corresponding to
Allwinner H3, but not A10.
Linux kernel is not affected since Linux driver uses DMA access and does
not use FIFO register for reading/writing.

This patch adds new class parameter `is_sun4i` and based on that
parameter uses register at offset 0x100 either as FIFO register (if
sun4i) or as threshold register (if not sun4i; in this case register at
0x200 is FIFO register).

Tested with U-Boot and Linux kernel image built for Cubieboard and
OrangePi PC.

Signed-off-by: Strahinja Jankovic <strahinja.p.jankovic@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20221112214900.24152-1-strahinja.p.jankovic@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2022-11-21 11:45:12 +00:00

138 lines
4.1 KiB
C

/*
* Allwinner (sun4i and above) SD Host Controller emulation
*
* Copyright (C) 2019 Niek Linnenbank <nieklinnenbank@gmail.com>
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef HW_SD_ALLWINNER_SDHOST_H
#define HW_SD_ALLWINNER_SDHOST_H
#include "qom/object.h"
#include "hw/sysbus.h"
#include "hw/sd/sd.h"
/**
* Object model types
* @{
*/
/** Generic Allwinner SD Host Controller (abstract) */
#define TYPE_AW_SDHOST "allwinner-sdhost"
/** Allwinner sun4i family (A10, A12) */
#define TYPE_AW_SDHOST_SUN4I TYPE_AW_SDHOST "-sun4i"
/** Allwinner sun5i family and newer (A13, H2+, H3, etc) */
#define TYPE_AW_SDHOST_SUN5I TYPE_AW_SDHOST "-sun5i"
/** @} */
/**
* Object model macros
* @{
*/
OBJECT_DECLARE_TYPE(AwSdHostState, AwSdHostClass, AW_SDHOST)
/** @} */
/**
* Allwinner SD Host Controller object instance state.
*/
struct AwSdHostState {
/*< private >*/
SysBusDevice busdev;
/*< public >*/
/** Secure Digital (SD) bus, which connects to SD card (if present) */
SDBus sdbus;
/** Maps I/O registers in physical memory */
MemoryRegion iomem;
/** Interrupt output signal to notify CPU */
qemu_irq irq;
/** Memory region where DMA transfers are done */
MemoryRegion *dma_mr;
/** Address space used internally for DMA transfers */
AddressSpace dma_as;
/** Number of bytes left in current DMA transfer */
uint32_t transfer_cnt;
/**
* @name Hardware Registers
* @{
*/
uint32_t global_ctl; /**< Global Control */
uint32_t clock_ctl; /**< Clock Control */
uint32_t timeout; /**< Timeout */
uint32_t bus_width; /**< Bus Width */
uint32_t block_size; /**< Block Size */
uint32_t byte_count; /**< Byte Count */
uint32_t command; /**< Command */
uint32_t command_arg; /**< Command Argument */
uint32_t response[4]; /**< Command Response */
uint32_t irq_mask; /**< Interrupt Mask */
uint32_t irq_status; /**< Raw Interrupt Status */
uint32_t status; /**< Status */
uint32_t fifo_wlevel; /**< FIFO Water Level */
uint32_t fifo_func_sel; /**< FIFO Function Select */
uint32_t debug_enable; /**< Debug Enable */
uint32_t auto12_arg; /**< Auto Command 12 Argument */
uint32_t newtiming_set; /**< SD New Timing Set */
uint32_t newtiming_debug; /**< SD New Timing Debug */
uint32_t hardware_rst; /**< Hardware Reset */
uint32_t dmac; /**< Internal DMA Controller Control */
uint32_t desc_base; /**< Descriptor List Base Address */
uint32_t dmac_status; /**< Internal DMA Controller Status */
uint32_t dmac_irq; /**< Internal DMA Controller IRQ Enable */
uint32_t card_threshold; /**< Card Threshold Control */
uint32_t startbit_detect; /**< eMMC DDR Start Bit Detection Control */
uint32_t response_crc; /**< Response CRC */
uint32_t data_crc[8]; /**< Data CRC */
uint32_t status_crc; /**< Status CRC */
/** @} */
};
/**
* Allwinner SD Host Controller class-level struct.
*
* This struct is filled by each sunxi device specific code
* such that the generic code can use this struct to support
* all devices.
*/
struct AwSdHostClass {
/*< private >*/
SysBusDeviceClass parent_class;
/*< public >*/
/** Maximum buffer size in bytes per DMA descriptor */
size_t max_desc_size;
bool is_sun4i;
};
#endif /* HW_SD_ALLWINNER_SDHOST_H */