qemu/linux-headers/asm-arm64/kvm.h
Chenyi Qiang d525f73f91 Update linux headers to v6.0-rc4
commit 7e18e42e4b280c85b76967a9106a13ca61c16179

Signed-off-by: Chenyi Qiang <chenyi.qiang@intel.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20220915091035.3897-3-chenyi.qiang@intel.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
2022-09-26 17:23:47 +02:00

462 lines
15 KiB
C

/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
/*
* Copyright (C) 2012,2013 - ARM Ltd
* Author: Marc Zyngier <marc.zyngier@arm.com>
*
* Derived from arch/arm/include/uapi/asm/kvm.h:
* Copyright (C) 2012 - Virtual Open Systems and Columbia University
* Author: Christoffer Dall <c.dall@virtualopensystems.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef __ARM_KVM_H__
#define __ARM_KVM_H__
#define KVM_SPSR_EL1 0
#define KVM_SPSR_SVC KVM_SPSR_EL1
#define KVM_SPSR_ABT 1
#define KVM_SPSR_UND 2
#define KVM_SPSR_IRQ 3
#define KVM_SPSR_FIQ 4
#define KVM_NR_SPSR 5
#ifndef __ASSEMBLY__
#include <linux/psci.h>
#include <linux/types.h>
#include <asm/ptrace.h>
#include <asm/sve_context.h>
#define __KVM_HAVE_GUEST_DEBUG
#define __KVM_HAVE_IRQ_LINE
#define __KVM_HAVE_READONLY_MEM
#define __KVM_HAVE_VCPU_EVENTS
#define KVM_COALESCED_MMIO_PAGE_OFFSET 1
#define KVM_REG_SIZE(id) \
(1U << (((id) & KVM_REG_SIZE_MASK) >> KVM_REG_SIZE_SHIFT))
struct kvm_regs {
struct user_pt_regs regs; /* sp = sp_el0 */
__u64 sp_el1;
__u64 elr_el1;
__u64 spsr[KVM_NR_SPSR];
struct user_fpsimd_state fp_regs;
};
/*
* Supported CPU Targets - Adding a new target type is not recommended,
* unless there are some special registers not supported by the
* genericv8 syreg table.
*/
#define KVM_ARM_TARGET_AEM_V8 0
#define KVM_ARM_TARGET_FOUNDATION_V8 1
#define KVM_ARM_TARGET_CORTEX_A57 2
#define KVM_ARM_TARGET_XGENE_POTENZA 3
#define KVM_ARM_TARGET_CORTEX_A53 4
/* Generic ARM v8 target */
#define KVM_ARM_TARGET_GENERIC_V8 5
#define KVM_ARM_NUM_TARGETS 6
/* KVM_ARM_SET_DEVICE_ADDR ioctl id encoding */
#define KVM_ARM_DEVICE_TYPE_SHIFT 0
#define KVM_ARM_DEVICE_TYPE_MASK GENMASK(KVM_ARM_DEVICE_TYPE_SHIFT + 15, \
KVM_ARM_DEVICE_TYPE_SHIFT)
#define KVM_ARM_DEVICE_ID_SHIFT 16
#define KVM_ARM_DEVICE_ID_MASK GENMASK(KVM_ARM_DEVICE_ID_SHIFT + 15, \
KVM_ARM_DEVICE_ID_SHIFT)
/* Supported device IDs */
#define KVM_ARM_DEVICE_VGIC_V2 0
/* Supported VGIC address types */
#define KVM_VGIC_V2_ADDR_TYPE_DIST 0
#define KVM_VGIC_V2_ADDR_TYPE_CPU 1
#define KVM_VGIC_V2_DIST_SIZE 0x1000
#define KVM_VGIC_V2_CPU_SIZE 0x2000
/* Supported VGICv3 address types */
#define KVM_VGIC_V3_ADDR_TYPE_DIST 2
#define KVM_VGIC_V3_ADDR_TYPE_REDIST 3
#define KVM_VGIC_ITS_ADDR_TYPE 4
#define KVM_VGIC_V3_ADDR_TYPE_REDIST_REGION 5
#define KVM_VGIC_V3_DIST_SIZE SZ_64K
#define KVM_VGIC_V3_REDIST_SIZE (2 * SZ_64K)
#define KVM_VGIC_V3_ITS_SIZE (2 * SZ_64K)
#define KVM_ARM_VCPU_POWER_OFF 0 /* CPU is started in OFF state */
#define KVM_ARM_VCPU_EL1_32BIT 1 /* CPU running a 32bit VM */
#define KVM_ARM_VCPU_PSCI_0_2 2 /* CPU uses PSCI v0.2 */
#define KVM_ARM_VCPU_PMU_V3 3 /* Support guest PMUv3 */
#define KVM_ARM_VCPU_SVE 4 /* enable SVE for this CPU */
#define KVM_ARM_VCPU_PTRAUTH_ADDRESS 5 /* VCPU uses address authentication */
#define KVM_ARM_VCPU_PTRAUTH_GENERIC 6 /* VCPU uses generic authentication */
struct kvm_vcpu_init {
__u32 target;
__u32 features[7];
};
struct kvm_sregs {
};
struct kvm_fpu {
};
/*
* See v8 ARM ARM D7.3: Debug Registers
*
* The architectural limit is 16 debug registers of each type although
* in practice there are usually less (see ID_AA64DFR0_EL1).
*
* Although the control registers are architecturally defined as 32
* bits wide we use a 64 bit structure here to keep parity with
* KVM_GET/SET_ONE_REG behaviour which treats all system registers as
* 64 bit values. It also allows for the possibility of the
* architecture expanding the control registers without having to
* change the userspace ABI.
*/
#define KVM_ARM_MAX_DBG_REGS 16
struct kvm_guest_debug_arch {
__u64 dbg_bcr[KVM_ARM_MAX_DBG_REGS];
__u64 dbg_bvr[KVM_ARM_MAX_DBG_REGS];
__u64 dbg_wcr[KVM_ARM_MAX_DBG_REGS];
__u64 dbg_wvr[KVM_ARM_MAX_DBG_REGS];
};
#define KVM_DEBUG_ARCH_HSR_HIGH_VALID (1 << 0)
struct kvm_debug_exit_arch {
__u32 hsr;
__u32 hsr_high; /* ESR_EL2[61:32] */
__u64 far; /* used for watchpoints */
};
/*
* Architecture specific defines for kvm_guest_debug->control
*/
#define KVM_GUESTDBG_USE_SW_BP (1 << 16)
#define KVM_GUESTDBG_USE_HW (1 << 17)
struct kvm_sync_regs {
/* Used with KVM_CAP_ARM_USER_IRQ */
__u64 device_irq_level;
};
/*
* PMU filter structure. Describe a range of events with a particular
* action. To be used with KVM_ARM_VCPU_PMU_V3_FILTER.
*/
struct kvm_pmu_event_filter {
__u16 base_event;
__u16 nevents;
#define KVM_PMU_EVENT_ALLOW 0
#define KVM_PMU_EVENT_DENY 1
__u8 action;
__u8 pad[3];
};
/* for KVM_GET/SET_VCPU_EVENTS */
struct kvm_vcpu_events {
struct {
__u8 serror_pending;
__u8 serror_has_esr;
__u8 ext_dabt_pending;
/* Align it to 8 bytes */
__u8 pad[5];
__u64 serror_esr;
} exception;
__u32 reserved[12];
};
struct kvm_arm_copy_mte_tags {
__u64 guest_ipa;
__u64 length;
void *addr;
__u64 flags;
__u64 reserved[2];
};
#define KVM_ARM_TAGS_TO_GUEST 0
#define KVM_ARM_TAGS_FROM_GUEST 1
/* If you need to interpret the index values, here is the key: */
#define KVM_REG_ARM_COPROC_MASK 0x000000000FFF0000
#define KVM_REG_ARM_COPROC_SHIFT 16
/* Normal registers are mapped as coprocessor 16. */
#define KVM_REG_ARM_CORE (0x0010 << KVM_REG_ARM_COPROC_SHIFT)
#define KVM_REG_ARM_CORE_REG(name) (offsetof(struct kvm_regs, name) / sizeof(__u32))
/* Some registers need more space to represent values. */
#define KVM_REG_ARM_DEMUX (0x0011 << KVM_REG_ARM_COPROC_SHIFT)
#define KVM_REG_ARM_DEMUX_ID_MASK 0x000000000000FF00
#define KVM_REG_ARM_DEMUX_ID_SHIFT 8
#define KVM_REG_ARM_DEMUX_ID_CCSIDR (0x00 << KVM_REG_ARM_DEMUX_ID_SHIFT)
#define KVM_REG_ARM_DEMUX_VAL_MASK 0x00000000000000FF
#define KVM_REG_ARM_DEMUX_VAL_SHIFT 0
/* AArch64 system registers */
#define KVM_REG_ARM64_SYSREG (0x0013 << KVM_REG_ARM_COPROC_SHIFT)
#define KVM_REG_ARM64_SYSREG_OP0_MASK 0x000000000000c000
#define KVM_REG_ARM64_SYSREG_OP0_SHIFT 14
#define KVM_REG_ARM64_SYSREG_OP1_MASK 0x0000000000003800
#define KVM_REG_ARM64_SYSREG_OP1_SHIFT 11
#define KVM_REG_ARM64_SYSREG_CRN_MASK 0x0000000000000780
#define KVM_REG_ARM64_SYSREG_CRN_SHIFT 7
#define KVM_REG_ARM64_SYSREG_CRM_MASK 0x0000000000000078
#define KVM_REG_ARM64_SYSREG_CRM_SHIFT 3
#define KVM_REG_ARM64_SYSREG_OP2_MASK 0x0000000000000007
#define KVM_REG_ARM64_SYSREG_OP2_SHIFT 0
#define ARM64_SYS_REG_SHIFT_MASK(x,n) \
(((x) << KVM_REG_ARM64_SYSREG_ ## n ## _SHIFT) & \
KVM_REG_ARM64_SYSREG_ ## n ## _MASK)
#define __ARM64_SYS_REG(op0,op1,crn,crm,op2) \
(KVM_REG_ARM64 | KVM_REG_ARM64_SYSREG | \
ARM64_SYS_REG_SHIFT_MASK(op0, OP0) | \
ARM64_SYS_REG_SHIFT_MASK(op1, OP1) | \
ARM64_SYS_REG_SHIFT_MASK(crn, CRN) | \
ARM64_SYS_REG_SHIFT_MASK(crm, CRM) | \
ARM64_SYS_REG_SHIFT_MASK(op2, OP2))
#define ARM64_SYS_REG(...) (__ARM64_SYS_REG(__VA_ARGS__) | KVM_REG_SIZE_U64)
/* Physical Timer EL0 Registers */
#define KVM_REG_ARM_PTIMER_CTL ARM64_SYS_REG(3, 3, 14, 2, 1)
#define KVM_REG_ARM_PTIMER_CVAL ARM64_SYS_REG(3, 3, 14, 2, 2)
#define KVM_REG_ARM_PTIMER_CNT ARM64_SYS_REG(3, 3, 14, 0, 1)
/*
* EL0 Virtual Timer Registers
*
* WARNING:
* KVM_REG_ARM_TIMER_CVAL and KVM_REG_ARM_TIMER_CNT are not defined
* with the appropriate register encodings. Their values have been
* accidentally swapped. As this is set API, the definitions here
* must be used, rather than ones derived from the encodings.
*/
#define KVM_REG_ARM_TIMER_CTL ARM64_SYS_REG(3, 3, 14, 3, 1)
#define KVM_REG_ARM_TIMER_CVAL ARM64_SYS_REG(3, 3, 14, 0, 2)
#define KVM_REG_ARM_TIMER_CNT ARM64_SYS_REG(3, 3, 14, 3, 2)
/* KVM-as-firmware specific pseudo-registers */
#define KVM_REG_ARM_FW (0x0014 << KVM_REG_ARM_COPROC_SHIFT)
#define KVM_REG_ARM_FW_REG(r) (KVM_REG_ARM64 | KVM_REG_SIZE_U64 | \
KVM_REG_ARM_FW | ((r) & 0xffff))
#define KVM_REG_ARM_PSCI_VERSION KVM_REG_ARM_FW_REG(0)
#define KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_1 KVM_REG_ARM_FW_REG(1)
#define KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_1_NOT_AVAIL 0
#define KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_1_AVAIL 1
#define KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_1_NOT_REQUIRED 2
/*
* Only two states can be presented by the host kernel:
* - NOT_REQUIRED: the guest doesn't need to do anything
* - NOT_AVAIL: the guest isn't mitigated (it can still use SSBS if available)
*
* All the other values are deprecated. The host still accepts all
* values (they are ABI), but will narrow them to the above two.
*/
#define KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_2 KVM_REG_ARM_FW_REG(2)
#define KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_2_NOT_AVAIL 0
#define KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_2_UNKNOWN 1
#define KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_2_AVAIL 2
#define KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_2_NOT_REQUIRED 3
#define KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_2_ENABLED (1U << 4)
#define KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_3 KVM_REG_ARM_FW_REG(3)
#define KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_3_NOT_AVAIL 0
#define KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_3_AVAIL 1
#define KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_3_NOT_REQUIRED 2
/* SVE registers */
#define KVM_REG_ARM64_SVE (0x15 << KVM_REG_ARM_COPROC_SHIFT)
/* Z- and P-regs occupy blocks at the following offsets within this range: */
#define KVM_REG_ARM64_SVE_ZREG_BASE 0
#define KVM_REG_ARM64_SVE_PREG_BASE 0x400
#define KVM_REG_ARM64_SVE_FFR_BASE 0x600
#define KVM_ARM64_SVE_NUM_ZREGS __SVE_NUM_ZREGS
#define KVM_ARM64_SVE_NUM_PREGS __SVE_NUM_PREGS
#define KVM_ARM64_SVE_MAX_SLICES 32
#define KVM_REG_ARM64_SVE_ZREG(n, i) \
(KVM_REG_ARM64 | KVM_REG_ARM64_SVE | KVM_REG_ARM64_SVE_ZREG_BASE | \
KVM_REG_SIZE_U2048 | \
(((n) & (KVM_ARM64_SVE_NUM_ZREGS - 1)) << 5) | \
((i) & (KVM_ARM64_SVE_MAX_SLICES - 1)))
#define KVM_REG_ARM64_SVE_PREG(n, i) \
(KVM_REG_ARM64 | KVM_REG_ARM64_SVE | KVM_REG_ARM64_SVE_PREG_BASE | \
KVM_REG_SIZE_U256 | \
(((n) & (KVM_ARM64_SVE_NUM_PREGS - 1)) << 5) | \
((i) & (KVM_ARM64_SVE_MAX_SLICES - 1)))
#define KVM_REG_ARM64_SVE_FFR(i) \
(KVM_REG_ARM64 | KVM_REG_ARM64_SVE | KVM_REG_ARM64_SVE_FFR_BASE | \
KVM_REG_SIZE_U256 | \
((i) & (KVM_ARM64_SVE_MAX_SLICES - 1)))
/*
* Register values for KVM_REG_ARM64_SVE_ZREG(), KVM_REG_ARM64_SVE_PREG() and
* KVM_REG_ARM64_SVE_FFR() are represented in memory in an endianness-
* invariant layout which differs from the layout used for the FPSIMD
* V-registers on big-endian systems: see sigcontext.h for more explanation.
*/
#define KVM_ARM64_SVE_VQ_MIN __SVE_VQ_MIN
#define KVM_ARM64_SVE_VQ_MAX __SVE_VQ_MAX
/* Vector lengths pseudo-register: */
#define KVM_REG_ARM64_SVE_VLS (KVM_REG_ARM64 | KVM_REG_ARM64_SVE | \
KVM_REG_SIZE_U512 | 0xffff)
#define KVM_ARM64_SVE_VLS_WORDS \
((KVM_ARM64_SVE_VQ_MAX - KVM_ARM64_SVE_VQ_MIN) / 64 + 1)
/* Bitmap feature firmware registers */
#define KVM_REG_ARM_FW_FEAT_BMAP (0x0016 << KVM_REG_ARM_COPROC_SHIFT)
#define KVM_REG_ARM_FW_FEAT_BMAP_REG(r) (KVM_REG_ARM64 | KVM_REG_SIZE_U64 | \
KVM_REG_ARM_FW_FEAT_BMAP | \
((r) & 0xffff))
#define KVM_REG_ARM_STD_BMAP KVM_REG_ARM_FW_FEAT_BMAP_REG(0)
enum {
KVM_REG_ARM_STD_BIT_TRNG_V1_0 = 0,
};
#define KVM_REG_ARM_STD_HYP_BMAP KVM_REG_ARM_FW_FEAT_BMAP_REG(1)
enum {
KVM_REG_ARM_STD_HYP_BIT_PV_TIME = 0,
};
#define KVM_REG_ARM_VENDOR_HYP_BMAP KVM_REG_ARM_FW_FEAT_BMAP_REG(2)
enum {
KVM_REG_ARM_VENDOR_HYP_BIT_FUNC_FEAT = 0,
KVM_REG_ARM_VENDOR_HYP_BIT_PTP = 1,
};
/* Device Control API: ARM VGIC */
#define KVM_DEV_ARM_VGIC_GRP_ADDR 0
#define KVM_DEV_ARM_VGIC_GRP_DIST_REGS 1
#define KVM_DEV_ARM_VGIC_GRP_CPU_REGS 2
#define KVM_DEV_ARM_VGIC_CPUID_SHIFT 32
#define KVM_DEV_ARM_VGIC_CPUID_MASK (0xffULL << KVM_DEV_ARM_VGIC_CPUID_SHIFT)
#define KVM_DEV_ARM_VGIC_V3_MPIDR_SHIFT 32
#define KVM_DEV_ARM_VGIC_V3_MPIDR_MASK \
(0xffffffffULL << KVM_DEV_ARM_VGIC_V3_MPIDR_SHIFT)
#define KVM_DEV_ARM_VGIC_OFFSET_SHIFT 0
#define KVM_DEV_ARM_VGIC_OFFSET_MASK (0xffffffffULL << KVM_DEV_ARM_VGIC_OFFSET_SHIFT)
#define KVM_DEV_ARM_VGIC_SYSREG_INSTR_MASK (0xffff)
#define KVM_DEV_ARM_VGIC_GRP_NR_IRQS 3
#define KVM_DEV_ARM_VGIC_GRP_CTRL 4
#define KVM_DEV_ARM_VGIC_GRP_REDIST_REGS 5
#define KVM_DEV_ARM_VGIC_GRP_CPU_SYSREGS 6
#define KVM_DEV_ARM_VGIC_GRP_LEVEL_INFO 7
#define KVM_DEV_ARM_VGIC_GRP_ITS_REGS 8
#define KVM_DEV_ARM_VGIC_LINE_LEVEL_INFO_SHIFT 10
#define KVM_DEV_ARM_VGIC_LINE_LEVEL_INFO_MASK \
(0x3fffffULL << KVM_DEV_ARM_VGIC_LINE_LEVEL_INFO_SHIFT)
#define KVM_DEV_ARM_VGIC_LINE_LEVEL_INTID_MASK 0x3ff
#define VGIC_LEVEL_INFO_LINE_LEVEL 0
#define KVM_DEV_ARM_VGIC_CTRL_INIT 0
#define KVM_DEV_ARM_ITS_SAVE_TABLES 1
#define KVM_DEV_ARM_ITS_RESTORE_TABLES 2
#define KVM_DEV_ARM_VGIC_SAVE_PENDING_TABLES 3
#define KVM_DEV_ARM_ITS_CTRL_RESET 4
/* Device Control API on vcpu fd */
#define KVM_ARM_VCPU_PMU_V3_CTRL 0
#define KVM_ARM_VCPU_PMU_V3_IRQ 0
#define KVM_ARM_VCPU_PMU_V3_INIT 1
#define KVM_ARM_VCPU_PMU_V3_FILTER 2
#define KVM_ARM_VCPU_PMU_V3_SET_PMU 3
#define KVM_ARM_VCPU_TIMER_CTRL 1
#define KVM_ARM_VCPU_TIMER_IRQ_VTIMER 0
#define KVM_ARM_VCPU_TIMER_IRQ_PTIMER 1
#define KVM_ARM_VCPU_PVTIME_CTRL 2
#define KVM_ARM_VCPU_PVTIME_IPA 0
/* KVM_IRQ_LINE irq field index values */
#define KVM_ARM_IRQ_VCPU2_SHIFT 28
#define KVM_ARM_IRQ_VCPU2_MASK 0xf
#define KVM_ARM_IRQ_TYPE_SHIFT 24
#define KVM_ARM_IRQ_TYPE_MASK 0xf
#define KVM_ARM_IRQ_VCPU_SHIFT 16
#define KVM_ARM_IRQ_VCPU_MASK 0xff
#define KVM_ARM_IRQ_NUM_SHIFT 0
#define KVM_ARM_IRQ_NUM_MASK 0xffff
/* irq_type field */
#define KVM_ARM_IRQ_TYPE_CPU 0
#define KVM_ARM_IRQ_TYPE_SPI 1
#define KVM_ARM_IRQ_TYPE_PPI 2
/* out-of-kernel GIC cpu interrupt injection irq_number field */
#define KVM_ARM_IRQ_CPU_IRQ 0
#define KVM_ARM_IRQ_CPU_FIQ 1
/*
* This used to hold the highest supported SPI, but it is now obsolete
* and only here to provide source code level compatibility with older
* userland. The highest SPI number can be set via KVM_DEV_ARM_VGIC_GRP_NR_IRQS.
*/
#define KVM_ARM_IRQ_GIC_MAX 127
/* One single KVM irqchip, ie. the VGIC */
#define KVM_NR_IRQCHIPS 1
/* PSCI interface */
#define KVM_PSCI_FN_BASE 0x95c1ba5e
#define KVM_PSCI_FN(n) (KVM_PSCI_FN_BASE + (n))
#define KVM_PSCI_FN_CPU_SUSPEND KVM_PSCI_FN(0)
#define KVM_PSCI_FN_CPU_OFF KVM_PSCI_FN(1)
#define KVM_PSCI_FN_CPU_ON KVM_PSCI_FN(2)
#define KVM_PSCI_FN_MIGRATE KVM_PSCI_FN(3)
#define KVM_PSCI_RET_SUCCESS PSCI_RET_SUCCESS
#define KVM_PSCI_RET_NI PSCI_RET_NOT_SUPPORTED
#define KVM_PSCI_RET_INVAL PSCI_RET_INVALID_PARAMS
#define KVM_PSCI_RET_DENIED PSCI_RET_DENIED
/* arm64-specific kvm_run::system_event flags */
/*
* Reset caused by a PSCI v1.1 SYSTEM_RESET2 call.
* Valid only when the system event has a type of KVM_SYSTEM_EVENT_RESET.
*/
#define KVM_SYSTEM_EVENT_RESET_FLAG_PSCI_RESET2 (1ULL << 0)
/* run->fail_entry.hardware_entry_failure_reason codes. */
#define KVM_EXIT_FAIL_ENTRY_CPU_UNSUPPORTED (1ULL << 0)
#endif
#endif /* __ARM_KVM_H__ */