qemu/include/hw/i2c/aspeed_i2c.h
Cédric Le Goater 545d6bef70 aspeed/i2c: Add support for DMA transfers
The I2C controller of the Aspeed AST2500 and AST2600 SoCs supports DMA
transfers to and from DRAM.

A pair of registers defines the buffer address and the length of the
DMA transfer. The address should be aligned on 4 bytes and the maximum
length should not exceed 4K. The receive or transmit DMA transfer can
then be initiated with specific bits in the Command/Status register of
the controller.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Tested-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-id: 20191119141211.25716-5-clg@kaod.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-12-16 10:46:34 +00:00

99 lines
2.5 KiB
C

/*
* ASPEED AST2400 I2C Controller
*
* Copyright (C) 2016 IBM Corp.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
*/
#ifndef ASPEED_I2C_H
#define ASPEED_I2C_H
#include "hw/i2c/i2c.h"
#include "hw/sysbus.h"
#define TYPE_ASPEED_I2C "aspeed.i2c"
#define TYPE_ASPEED_2400_I2C TYPE_ASPEED_I2C "-ast2400"
#define TYPE_ASPEED_2500_I2C TYPE_ASPEED_I2C "-ast2500"
#define TYPE_ASPEED_2600_I2C TYPE_ASPEED_I2C "-ast2600"
#define ASPEED_I2C(obj) \
OBJECT_CHECK(AspeedI2CState, (obj), TYPE_ASPEED_I2C)
#define ASPEED_I2C_NR_BUSSES 16
#define ASPEED_I2C_MAX_POOL_SIZE 0x800
struct AspeedI2CState;
typedef struct AspeedI2CBus {
struct AspeedI2CState *controller;
MemoryRegion mr;
I2CBus *bus;
uint8_t id;
qemu_irq irq;
uint32_t ctrl;
uint32_t timing[2];
uint32_t intr_ctrl;
uint32_t intr_status;
uint32_t cmd;
uint32_t buf;
uint32_t pool_ctrl;
uint32_t dma_addr;
uint32_t dma_len;
} AspeedI2CBus;
typedef struct AspeedI2CState {
SysBusDevice parent_obj;
MemoryRegion iomem;
qemu_irq irq;
uint32_t intr_status;
uint32_t ctrl_global;
MemoryRegion pool_iomem;
uint8_t pool[ASPEED_I2C_MAX_POOL_SIZE];
AspeedI2CBus busses[ASPEED_I2C_NR_BUSSES];
MemoryRegion *dram_mr;
AddressSpace dram_as;
} AspeedI2CState;
#define ASPEED_I2C_CLASS(klass) \
OBJECT_CLASS_CHECK(AspeedI2CClass, (klass), TYPE_ASPEED_I2C)
#define ASPEED_I2C_GET_CLASS(obj) \
OBJECT_GET_CLASS(AspeedI2CClass, (obj), TYPE_ASPEED_I2C)
typedef struct AspeedI2CClass {
SysBusDeviceClass parent_class;
uint8_t num_busses;
uint8_t reg_size;
uint8_t gap;
qemu_irq (*bus_get_irq)(AspeedI2CBus *);
uint64_t pool_size;
hwaddr pool_base;
uint8_t *(*bus_pool_base)(AspeedI2CBus *);
bool check_sram;
bool has_dma;
} AspeedI2CClass;
I2CBus *aspeed_i2c_get_bus(DeviceState *dev, int busnr);
#endif /* ASPEED_I2C_H */