55c136599f
When riscv_load_firmware() loads an ELF, the ELF segment addresses are used, not the passed-in firmware_load_addr. The machine models assume the firmware entry point is what they provided for firmware_load_addr, and use that address to generate the boot ROM, so if the ELF is linked at any other address, the boot ROM will jump to empty memory. Pass back the ELF entry point to use when generating the boot ROM, so the boot ROM can jump to firmware loaded anywhere in RAM. For example, on the virt machine, this allows using an OpenSBI fw_dynamic.elf built with FW_TEXT_START values other than 0x80000000. Signed-off-by: Samuel Holland <samuel.holland@sifive.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20240817002651.3209701-1-samuel.holland@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
1845 lines
70 KiB
C
1845 lines
70 KiB
C
/*
|
|
* QEMU RISC-V VirtIO Board
|
|
*
|
|
* Copyright (c) 2017 SiFive, Inc.
|
|
*
|
|
* RISC-V machine with 16550a UART and VirtIO MMIO
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms and conditions of the GNU General Public License,
|
|
* version 2 or later, as published by the Free Software Foundation.
|
|
*
|
|
* This program is distributed in the hope it will be useful, but WITHOUT
|
|
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
|
|
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
|
|
* more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License along with
|
|
* this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*/
|
|
|
|
#include "qemu/osdep.h"
|
|
#include "qemu/units.h"
|
|
#include "qemu/error-report.h"
|
|
#include "qemu/guest-random.h"
|
|
#include "qapi/error.h"
|
|
#include "hw/boards.h"
|
|
#include "hw/loader.h"
|
|
#include "hw/sysbus.h"
|
|
#include "hw/qdev-properties.h"
|
|
#include "hw/char/serial.h"
|
|
#include "target/riscv/cpu.h"
|
|
#include "hw/core/sysbus-fdt.h"
|
|
#include "target/riscv/pmu.h"
|
|
#include "hw/riscv/riscv_hart.h"
|
|
#include "hw/riscv/virt.h"
|
|
#include "hw/riscv/boot.h"
|
|
#include "hw/riscv/numa.h"
|
|
#include "kvm/kvm_riscv.h"
|
|
#include "hw/firmware/smbios.h"
|
|
#include "hw/intc/riscv_aclint.h"
|
|
#include "hw/intc/riscv_aplic.h"
|
|
#include "hw/intc/sifive_plic.h"
|
|
#include "hw/misc/sifive_test.h"
|
|
#include "hw/platform-bus.h"
|
|
#include "chardev/char.h"
|
|
#include "sysemu/device_tree.h"
|
|
#include "sysemu/sysemu.h"
|
|
#include "sysemu/tcg.h"
|
|
#include "sysemu/kvm.h"
|
|
#include "sysemu/tpm.h"
|
|
#include "sysemu/qtest.h"
|
|
#include "hw/pci/pci.h"
|
|
#include "hw/pci-host/gpex.h"
|
|
#include "hw/display/ramfb.h"
|
|
#include "hw/acpi/aml-build.h"
|
|
#include "qapi/qapi-visit-common.h"
|
|
#include "hw/virtio/virtio-iommu.h"
|
|
|
|
/* KVM AIA only supports APLIC MSI. APLIC Wired is always emulated by QEMU. */
|
|
static bool virt_use_kvm_aia(RISCVVirtState *s)
|
|
{
|
|
return kvm_irqchip_in_kernel() && s->aia_type == VIRT_AIA_TYPE_APLIC_IMSIC;
|
|
}
|
|
|
|
static bool virt_aclint_allowed(void)
|
|
{
|
|
return tcg_enabled() || qtest_enabled();
|
|
}
|
|
|
|
static const MemMapEntry virt_memmap[] = {
|
|
[VIRT_DEBUG] = { 0x0, 0x100 },
|
|
[VIRT_MROM] = { 0x1000, 0xf000 },
|
|
[VIRT_TEST] = { 0x100000, 0x1000 },
|
|
[VIRT_RTC] = { 0x101000, 0x1000 },
|
|
[VIRT_CLINT] = { 0x2000000, 0x10000 },
|
|
[VIRT_ACLINT_SSWI] = { 0x2F00000, 0x4000 },
|
|
[VIRT_PCIE_PIO] = { 0x3000000, 0x10000 },
|
|
[VIRT_PLATFORM_BUS] = { 0x4000000, 0x2000000 },
|
|
[VIRT_PLIC] = { 0xc000000, VIRT_PLIC_SIZE(VIRT_CPUS_MAX * 2) },
|
|
[VIRT_APLIC_M] = { 0xc000000, APLIC_SIZE(VIRT_CPUS_MAX) },
|
|
[VIRT_APLIC_S] = { 0xd000000, APLIC_SIZE(VIRT_CPUS_MAX) },
|
|
[VIRT_UART0] = { 0x10000000, 0x100 },
|
|
[VIRT_VIRTIO] = { 0x10001000, 0x1000 },
|
|
[VIRT_FW_CFG] = { 0x10100000, 0x18 },
|
|
[VIRT_FLASH] = { 0x20000000, 0x4000000 },
|
|
[VIRT_IMSIC_M] = { 0x24000000, VIRT_IMSIC_MAX_SIZE },
|
|
[VIRT_IMSIC_S] = { 0x28000000, VIRT_IMSIC_MAX_SIZE },
|
|
[VIRT_PCIE_ECAM] = { 0x30000000, 0x10000000 },
|
|
[VIRT_PCIE_MMIO] = { 0x40000000, 0x40000000 },
|
|
[VIRT_DRAM] = { 0x80000000, 0x0 },
|
|
};
|
|
|
|
/* PCIe high mmio is fixed for RV32 */
|
|
#define VIRT32_HIGH_PCIE_MMIO_BASE 0x300000000ULL
|
|
#define VIRT32_HIGH_PCIE_MMIO_SIZE (4 * GiB)
|
|
|
|
/* PCIe high mmio for RV64, size is fixed but base depends on top of RAM */
|
|
#define VIRT64_HIGH_PCIE_MMIO_SIZE (16 * GiB)
|
|
|
|
static MemMapEntry virt_high_pcie_memmap;
|
|
|
|
#define VIRT_FLASH_SECTOR_SIZE (256 * KiB)
|
|
|
|
static PFlashCFI01 *virt_flash_create1(RISCVVirtState *s,
|
|
const char *name,
|
|
const char *alias_prop_name)
|
|
{
|
|
/*
|
|
* Create a single flash device. We use the same parameters as
|
|
* the flash devices on the ARM virt board.
|
|
*/
|
|
DeviceState *dev = qdev_new(TYPE_PFLASH_CFI01);
|
|
|
|
qdev_prop_set_uint64(dev, "sector-length", VIRT_FLASH_SECTOR_SIZE);
|
|
qdev_prop_set_uint8(dev, "width", 4);
|
|
qdev_prop_set_uint8(dev, "device-width", 2);
|
|
qdev_prop_set_bit(dev, "big-endian", false);
|
|
qdev_prop_set_uint16(dev, "id0", 0x89);
|
|
qdev_prop_set_uint16(dev, "id1", 0x18);
|
|
qdev_prop_set_uint16(dev, "id2", 0x00);
|
|
qdev_prop_set_uint16(dev, "id3", 0x00);
|
|
qdev_prop_set_string(dev, "name", name);
|
|
|
|
object_property_add_child(OBJECT(s), name, OBJECT(dev));
|
|
object_property_add_alias(OBJECT(s), alias_prop_name,
|
|
OBJECT(dev), "drive");
|
|
|
|
return PFLASH_CFI01(dev);
|
|
}
|
|
|
|
static void virt_flash_create(RISCVVirtState *s)
|
|
{
|
|
s->flash[0] = virt_flash_create1(s, "virt.flash0", "pflash0");
|
|
s->flash[1] = virt_flash_create1(s, "virt.flash1", "pflash1");
|
|
}
|
|
|
|
static void virt_flash_map1(PFlashCFI01 *flash,
|
|
hwaddr base, hwaddr size,
|
|
MemoryRegion *sysmem)
|
|
{
|
|
DeviceState *dev = DEVICE(flash);
|
|
|
|
assert(QEMU_IS_ALIGNED(size, VIRT_FLASH_SECTOR_SIZE));
|
|
assert(size / VIRT_FLASH_SECTOR_SIZE <= UINT32_MAX);
|
|
qdev_prop_set_uint32(dev, "num-blocks", size / VIRT_FLASH_SECTOR_SIZE);
|
|
sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), &error_fatal);
|
|
|
|
memory_region_add_subregion(sysmem, base,
|
|
sysbus_mmio_get_region(SYS_BUS_DEVICE(dev),
|
|
0));
|
|
}
|
|
|
|
static void virt_flash_map(RISCVVirtState *s,
|
|
MemoryRegion *sysmem)
|
|
{
|
|
hwaddr flashsize = virt_memmap[VIRT_FLASH].size / 2;
|
|
hwaddr flashbase = virt_memmap[VIRT_FLASH].base;
|
|
|
|
virt_flash_map1(s->flash[0], flashbase, flashsize,
|
|
sysmem);
|
|
virt_flash_map1(s->flash[1], flashbase + flashsize, flashsize,
|
|
sysmem);
|
|
}
|
|
|
|
static void create_pcie_irq_map(RISCVVirtState *s, void *fdt, char *nodename,
|
|
uint32_t irqchip_phandle)
|
|
{
|
|
int pin, dev;
|
|
uint32_t irq_map_stride = 0;
|
|
uint32_t full_irq_map[GPEX_NUM_IRQS * GPEX_NUM_IRQS *
|
|
FDT_MAX_INT_MAP_WIDTH] = {};
|
|
uint32_t *irq_map = full_irq_map;
|
|
|
|
/* This code creates a standard swizzle of interrupts such that
|
|
* each device's first interrupt is based on it's PCI_SLOT number.
|
|
* (See pci_swizzle_map_irq_fn())
|
|
*
|
|
* We only need one entry per interrupt in the table (not one per
|
|
* possible slot) seeing the interrupt-map-mask will allow the table
|
|
* to wrap to any number of devices.
|
|
*/
|
|
for (dev = 0; dev < GPEX_NUM_IRQS; dev++) {
|
|
int devfn = dev * 0x8;
|
|
|
|
for (pin = 0; pin < GPEX_NUM_IRQS; pin++) {
|
|
int irq_nr = PCIE_IRQ + ((pin + PCI_SLOT(devfn)) % GPEX_NUM_IRQS);
|
|
int i = 0;
|
|
|
|
/* Fill PCI address cells */
|
|
irq_map[i] = cpu_to_be32(devfn << 8);
|
|
i += FDT_PCI_ADDR_CELLS;
|
|
|
|
/* Fill PCI Interrupt cells */
|
|
irq_map[i] = cpu_to_be32(pin + 1);
|
|
i += FDT_PCI_INT_CELLS;
|
|
|
|
/* Fill interrupt controller phandle and cells */
|
|
irq_map[i++] = cpu_to_be32(irqchip_phandle);
|
|
irq_map[i++] = cpu_to_be32(irq_nr);
|
|
if (s->aia_type != VIRT_AIA_TYPE_NONE) {
|
|
irq_map[i++] = cpu_to_be32(0x4);
|
|
}
|
|
|
|
if (!irq_map_stride) {
|
|
irq_map_stride = i;
|
|
}
|
|
irq_map += irq_map_stride;
|
|
}
|
|
}
|
|
|
|
qemu_fdt_setprop(fdt, nodename, "interrupt-map", full_irq_map,
|
|
GPEX_NUM_IRQS * GPEX_NUM_IRQS *
|
|
irq_map_stride * sizeof(uint32_t));
|
|
|
|
qemu_fdt_setprop_cells(fdt, nodename, "interrupt-map-mask",
|
|
0x1800, 0, 0, 0x7);
|
|
}
|
|
|
|
static void create_fdt_socket_cpus(RISCVVirtState *s, int socket,
|
|
char *clust_name, uint32_t *phandle,
|
|
uint32_t *intc_phandles)
|
|
{
|
|
int cpu;
|
|
uint32_t cpu_phandle;
|
|
MachineState *ms = MACHINE(s);
|
|
bool is_32_bit = riscv_is_32bit(&s->soc[0]);
|
|
uint8_t satp_mode_max;
|
|
|
|
for (cpu = s->soc[socket].num_harts - 1; cpu >= 0; cpu--) {
|
|
RISCVCPU *cpu_ptr = &s->soc[socket].harts[cpu];
|
|
g_autofree char *cpu_name = NULL;
|
|
g_autofree char *core_name = NULL;
|
|
g_autofree char *intc_name = NULL;
|
|
g_autofree char *sv_name = NULL;
|
|
|
|
cpu_phandle = (*phandle)++;
|
|
|
|
cpu_name = g_strdup_printf("/cpus/cpu@%d",
|
|
s->soc[socket].hartid_base + cpu);
|
|
qemu_fdt_add_subnode(ms->fdt, cpu_name);
|
|
|
|
if (cpu_ptr->cfg.satp_mode.supported != 0) {
|
|
satp_mode_max = satp_mode_max_from_map(cpu_ptr->cfg.satp_mode.map);
|
|
sv_name = g_strdup_printf("riscv,%s",
|
|
satp_mode_str(satp_mode_max, is_32_bit));
|
|
qemu_fdt_setprop_string(ms->fdt, cpu_name, "mmu-type", sv_name);
|
|
}
|
|
|
|
riscv_isa_write_fdt(cpu_ptr, ms->fdt, cpu_name);
|
|
|
|
if (cpu_ptr->cfg.ext_zicbom) {
|
|
qemu_fdt_setprop_cell(ms->fdt, cpu_name, "riscv,cbom-block-size",
|
|
cpu_ptr->cfg.cbom_blocksize);
|
|
}
|
|
|
|
if (cpu_ptr->cfg.ext_zicboz) {
|
|
qemu_fdt_setprop_cell(ms->fdt, cpu_name, "riscv,cboz-block-size",
|
|
cpu_ptr->cfg.cboz_blocksize);
|
|
}
|
|
|
|
if (cpu_ptr->cfg.ext_zicbop) {
|
|
qemu_fdt_setprop_cell(ms->fdt, cpu_name, "riscv,cbop-block-size",
|
|
cpu_ptr->cfg.cbop_blocksize);
|
|
}
|
|
|
|
qemu_fdt_setprop_string(ms->fdt, cpu_name, "compatible", "riscv");
|
|
qemu_fdt_setprop_string(ms->fdt, cpu_name, "status", "okay");
|
|
qemu_fdt_setprop_cell(ms->fdt, cpu_name, "reg",
|
|
s->soc[socket].hartid_base + cpu);
|
|
qemu_fdt_setprop_string(ms->fdt, cpu_name, "device_type", "cpu");
|
|
riscv_socket_fdt_write_id(ms, cpu_name, socket);
|
|
qemu_fdt_setprop_cell(ms->fdt, cpu_name, "phandle", cpu_phandle);
|
|
|
|
intc_phandles[cpu] = (*phandle)++;
|
|
|
|
intc_name = g_strdup_printf("%s/interrupt-controller", cpu_name);
|
|
qemu_fdt_add_subnode(ms->fdt, intc_name);
|
|
qemu_fdt_setprop_cell(ms->fdt, intc_name, "phandle",
|
|
intc_phandles[cpu]);
|
|
qemu_fdt_setprop_string(ms->fdt, intc_name, "compatible",
|
|
"riscv,cpu-intc");
|
|
qemu_fdt_setprop(ms->fdt, intc_name, "interrupt-controller", NULL, 0);
|
|
qemu_fdt_setprop_cell(ms->fdt, intc_name, "#interrupt-cells", 1);
|
|
|
|
core_name = g_strdup_printf("%s/core%d", clust_name, cpu);
|
|
qemu_fdt_add_subnode(ms->fdt, core_name);
|
|
qemu_fdt_setprop_cell(ms->fdt, core_name, "cpu", cpu_phandle);
|
|
}
|
|
}
|
|
|
|
static void create_fdt_socket_memory(RISCVVirtState *s,
|
|
const MemMapEntry *memmap, int socket)
|
|
{
|
|
g_autofree char *mem_name = NULL;
|
|
uint64_t addr, size;
|
|
MachineState *ms = MACHINE(s);
|
|
|
|
addr = memmap[VIRT_DRAM].base + riscv_socket_mem_offset(ms, socket);
|
|
size = riscv_socket_mem_size(ms, socket);
|
|
mem_name = g_strdup_printf("/memory@%lx", (long)addr);
|
|
qemu_fdt_add_subnode(ms->fdt, mem_name);
|
|
qemu_fdt_setprop_cells(ms->fdt, mem_name, "reg",
|
|
addr >> 32, addr, size >> 32, size);
|
|
qemu_fdt_setprop_string(ms->fdt, mem_name, "device_type", "memory");
|
|
riscv_socket_fdt_write_id(ms, mem_name, socket);
|
|
}
|
|
|
|
static void create_fdt_socket_clint(RISCVVirtState *s,
|
|
const MemMapEntry *memmap, int socket,
|
|
uint32_t *intc_phandles)
|
|
{
|
|
int cpu;
|
|
g_autofree char *clint_name = NULL;
|
|
g_autofree uint32_t *clint_cells = NULL;
|
|
unsigned long clint_addr;
|
|
MachineState *ms = MACHINE(s);
|
|
static const char * const clint_compat[2] = {
|
|
"sifive,clint0", "riscv,clint0"
|
|
};
|
|
|
|
clint_cells = g_new0(uint32_t, s->soc[socket].num_harts * 4);
|
|
|
|
for (cpu = 0; cpu < s->soc[socket].num_harts; cpu++) {
|
|
clint_cells[cpu * 4 + 0] = cpu_to_be32(intc_phandles[cpu]);
|
|
clint_cells[cpu * 4 + 1] = cpu_to_be32(IRQ_M_SOFT);
|
|
clint_cells[cpu * 4 + 2] = cpu_to_be32(intc_phandles[cpu]);
|
|
clint_cells[cpu * 4 + 3] = cpu_to_be32(IRQ_M_TIMER);
|
|
}
|
|
|
|
clint_addr = memmap[VIRT_CLINT].base + (memmap[VIRT_CLINT].size * socket);
|
|
clint_name = g_strdup_printf("/soc/clint@%lx", clint_addr);
|
|
qemu_fdt_add_subnode(ms->fdt, clint_name);
|
|
qemu_fdt_setprop_string_array(ms->fdt, clint_name, "compatible",
|
|
(char **)&clint_compat,
|
|
ARRAY_SIZE(clint_compat));
|
|
qemu_fdt_setprop_cells(ms->fdt, clint_name, "reg",
|
|
0x0, clint_addr, 0x0, memmap[VIRT_CLINT].size);
|
|
qemu_fdt_setprop(ms->fdt, clint_name, "interrupts-extended",
|
|
clint_cells, s->soc[socket].num_harts * sizeof(uint32_t) * 4);
|
|
riscv_socket_fdt_write_id(ms, clint_name, socket);
|
|
}
|
|
|
|
static void create_fdt_socket_aclint(RISCVVirtState *s,
|
|
const MemMapEntry *memmap, int socket,
|
|
uint32_t *intc_phandles)
|
|
{
|
|
int cpu;
|
|
char *name;
|
|
unsigned long addr, size;
|
|
uint32_t aclint_cells_size;
|
|
g_autofree uint32_t *aclint_mswi_cells = NULL;
|
|
g_autofree uint32_t *aclint_sswi_cells = NULL;
|
|
g_autofree uint32_t *aclint_mtimer_cells = NULL;
|
|
MachineState *ms = MACHINE(s);
|
|
|
|
aclint_mswi_cells = g_new0(uint32_t, s->soc[socket].num_harts * 2);
|
|
aclint_mtimer_cells = g_new0(uint32_t, s->soc[socket].num_harts * 2);
|
|
aclint_sswi_cells = g_new0(uint32_t, s->soc[socket].num_harts * 2);
|
|
|
|
for (cpu = 0; cpu < s->soc[socket].num_harts; cpu++) {
|
|
aclint_mswi_cells[cpu * 2 + 0] = cpu_to_be32(intc_phandles[cpu]);
|
|
aclint_mswi_cells[cpu * 2 + 1] = cpu_to_be32(IRQ_M_SOFT);
|
|
aclint_mtimer_cells[cpu * 2 + 0] = cpu_to_be32(intc_phandles[cpu]);
|
|
aclint_mtimer_cells[cpu * 2 + 1] = cpu_to_be32(IRQ_M_TIMER);
|
|
aclint_sswi_cells[cpu * 2 + 0] = cpu_to_be32(intc_phandles[cpu]);
|
|
aclint_sswi_cells[cpu * 2 + 1] = cpu_to_be32(IRQ_S_SOFT);
|
|
}
|
|
aclint_cells_size = s->soc[socket].num_harts * sizeof(uint32_t) * 2;
|
|
|
|
if (s->aia_type != VIRT_AIA_TYPE_APLIC_IMSIC) {
|
|
addr = memmap[VIRT_CLINT].base + (memmap[VIRT_CLINT].size * socket);
|
|
name = g_strdup_printf("/soc/mswi@%lx", addr);
|
|
qemu_fdt_add_subnode(ms->fdt, name);
|
|
qemu_fdt_setprop_string(ms->fdt, name, "compatible",
|
|
"riscv,aclint-mswi");
|
|
qemu_fdt_setprop_cells(ms->fdt, name, "reg",
|
|
0x0, addr, 0x0, RISCV_ACLINT_SWI_SIZE);
|
|
qemu_fdt_setprop(ms->fdt, name, "interrupts-extended",
|
|
aclint_mswi_cells, aclint_cells_size);
|
|
qemu_fdt_setprop(ms->fdt, name, "interrupt-controller", NULL, 0);
|
|
qemu_fdt_setprop_cell(ms->fdt, name, "#interrupt-cells", 0);
|
|
riscv_socket_fdt_write_id(ms, name, socket);
|
|
g_free(name);
|
|
}
|
|
|
|
if (s->aia_type == VIRT_AIA_TYPE_APLIC_IMSIC) {
|
|
addr = memmap[VIRT_CLINT].base +
|
|
(RISCV_ACLINT_DEFAULT_MTIMER_SIZE * socket);
|
|
size = RISCV_ACLINT_DEFAULT_MTIMER_SIZE;
|
|
} else {
|
|
addr = memmap[VIRT_CLINT].base + RISCV_ACLINT_SWI_SIZE +
|
|
(memmap[VIRT_CLINT].size * socket);
|
|
size = memmap[VIRT_CLINT].size - RISCV_ACLINT_SWI_SIZE;
|
|
}
|
|
name = g_strdup_printf("/soc/mtimer@%lx", addr);
|
|
qemu_fdt_add_subnode(ms->fdt, name);
|
|
qemu_fdt_setprop_string(ms->fdt, name, "compatible",
|
|
"riscv,aclint-mtimer");
|
|
qemu_fdt_setprop_cells(ms->fdt, name, "reg",
|
|
0x0, addr + RISCV_ACLINT_DEFAULT_MTIME,
|
|
0x0, size - RISCV_ACLINT_DEFAULT_MTIME,
|
|
0x0, addr + RISCV_ACLINT_DEFAULT_MTIMECMP,
|
|
0x0, RISCV_ACLINT_DEFAULT_MTIME);
|
|
qemu_fdt_setprop(ms->fdt, name, "interrupts-extended",
|
|
aclint_mtimer_cells, aclint_cells_size);
|
|
riscv_socket_fdt_write_id(ms, name, socket);
|
|
g_free(name);
|
|
|
|
if (s->aia_type != VIRT_AIA_TYPE_APLIC_IMSIC) {
|
|
addr = memmap[VIRT_ACLINT_SSWI].base +
|
|
(memmap[VIRT_ACLINT_SSWI].size * socket);
|
|
name = g_strdup_printf("/soc/sswi@%lx", addr);
|
|
qemu_fdt_add_subnode(ms->fdt, name);
|
|
qemu_fdt_setprop_string(ms->fdt, name, "compatible",
|
|
"riscv,aclint-sswi");
|
|
qemu_fdt_setprop_cells(ms->fdt, name, "reg",
|
|
0x0, addr, 0x0, memmap[VIRT_ACLINT_SSWI].size);
|
|
qemu_fdt_setprop(ms->fdt, name, "interrupts-extended",
|
|
aclint_sswi_cells, aclint_cells_size);
|
|
qemu_fdt_setprop(ms->fdt, name, "interrupt-controller", NULL, 0);
|
|
qemu_fdt_setprop_cell(ms->fdt, name, "#interrupt-cells", 0);
|
|
riscv_socket_fdt_write_id(ms, name, socket);
|
|
g_free(name);
|
|
}
|
|
}
|
|
|
|
static void create_fdt_socket_plic(RISCVVirtState *s,
|
|
const MemMapEntry *memmap, int socket,
|
|
uint32_t *phandle, uint32_t *intc_phandles,
|
|
uint32_t *plic_phandles)
|
|
{
|
|
int cpu;
|
|
g_autofree char *plic_name = NULL;
|
|
g_autofree uint32_t *plic_cells;
|
|
unsigned long plic_addr;
|
|
MachineState *ms = MACHINE(s);
|
|
static const char * const plic_compat[2] = {
|
|
"sifive,plic-1.0.0", "riscv,plic0"
|
|
};
|
|
|
|
plic_phandles[socket] = (*phandle)++;
|
|
plic_addr = memmap[VIRT_PLIC].base + (memmap[VIRT_PLIC].size * socket);
|
|
plic_name = g_strdup_printf("/soc/plic@%lx", plic_addr);
|
|
qemu_fdt_add_subnode(ms->fdt, plic_name);
|
|
qemu_fdt_setprop_cell(ms->fdt, plic_name,
|
|
"#interrupt-cells", FDT_PLIC_INT_CELLS);
|
|
qemu_fdt_setprop_cell(ms->fdt, plic_name,
|
|
"#address-cells", FDT_PLIC_ADDR_CELLS);
|
|
qemu_fdt_setprop_string_array(ms->fdt, plic_name, "compatible",
|
|
(char **)&plic_compat,
|
|
ARRAY_SIZE(plic_compat));
|
|
qemu_fdt_setprop(ms->fdt, plic_name, "interrupt-controller", NULL, 0);
|
|
|
|
if (kvm_enabled()) {
|
|
plic_cells = g_new0(uint32_t, s->soc[socket].num_harts * 2);
|
|
|
|
for (cpu = 0; cpu < s->soc[socket].num_harts; cpu++) {
|
|
plic_cells[cpu * 2 + 0] = cpu_to_be32(intc_phandles[cpu]);
|
|
plic_cells[cpu * 2 + 1] = cpu_to_be32(IRQ_S_EXT);
|
|
}
|
|
|
|
qemu_fdt_setprop(ms->fdt, plic_name, "interrupts-extended",
|
|
plic_cells,
|
|
s->soc[socket].num_harts * sizeof(uint32_t) * 2);
|
|
} else {
|
|
plic_cells = g_new0(uint32_t, s->soc[socket].num_harts * 4);
|
|
|
|
for (cpu = 0; cpu < s->soc[socket].num_harts; cpu++) {
|
|
plic_cells[cpu * 4 + 0] = cpu_to_be32(intc_phandles[cpu]);
|
|
plic_cells[cpu * 4 + 1] = cpu_to_be32(IRQ_M_EXT);
|
|
plic_cells[cpu * 4 + 2] = cpu_to_be32(intc_phandles[cpu]);
|
|
plic_cells[cpu * 4 + 3] = cpu_to_be32(IRQ_S_EXT);
|
|
}
|
|
|
|
qemu_fdt_setprop(ms->fdt, plic_name, "interrupts-extended",
|
|
plic_cells,
|
|
s->soc[socket].num_harts * sizeof(uint32_t) * 4);
|
|
}
|
|
|
|
qemu_fdt_setprop_cells(ms->fdt, plic_name, "reg",
|
|
0x0, plic_addr, 0x0, memmap[VIRT_PLIC].size);
|
|
qemu_fdt_setprop_cell(ms->fdt, plic_name, "riscv,ndev",
|
|
VIRT_IRQCHIP_NUM_SOURCES - 1);
|
|
riscv_socket_fdt_write_id(ms, plic_name, socket);
|
|
qemu_fdt_setprop_cell(ms->fdt, plic_name, "phandle",
|
|
plic_phandles[socket]);
|
|
|
|
if (!socket) {
|
|
platform_bus_add_all_fdt_nodes(ms->fdt, plic_name,
|
|
memmap[VIRT_PLATFORM_BUS].base,
|
|
memmap[VIRT_PLATFORM_BUS].size,
|
|
VIRT_PLATFORM_BUS_IRQ);
|
|
}
|
|
}
|
|
|
|
uint32_t imsic_num_bits(uint32_t count)
|
|
{
|
|
uint32_t ret = 0;
|
|
|
|
while (BIT(ret) < count) {
|
|
ret++;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void create_fdt_one_imsic(RISCVVirtState *s, hwaddr base_addr,
|
|
uint32_t *intc_phandles, uint32_t msi_phandle,
|
|
bool m_mode, uint32_t imsic_guest_bits)
|
|
{
|
|
int cpu, socket;
|
|
g_autofree char *imsic_name = NULL;
|
|
MachineState *ms = MACHINE(s);
|
|
int socket_count = riscv_socket_count(ms);
|
|
uint32_t imsic_max_hart_per_socket, imsic_addr, imsic_size;
|
|
g_autofree uint32_t *imsic_cells = NULL;
|
|
g_autofree uint32_t *imsic_regs = NULL;
|
|
static const char * const imsic_compat[2] = {
|
|
"qemu,imsics", "riscv,imsics"
|
|
};
|
|
|
|
imsic_cells = g_new0(uint32_t, ms->smp.cpus * 2);
|
|
imsic_regs = g_new0(uint32_t, socket_count * 4);
|
|
|
|
for (cpu = 0; cpu < ms->smp.cpus; cpu++) {
|
|
imsic_cells[cpu * 2 + 0] = cpu_to_be32(intc_phandles[cpu]);
|
|
imsic_cells[cpu * 2 + 1] = cpu_to_be32(m_mode ? IRQ_M_EXT : IRQ_S_EXT);
|
|
}
|
|
|
|
imsic_max_hart_per_socket = 0;
|
|
for (socket = 0; socket < socket_count; socket++) {
|
|
imsic_addr = base_addr + socket * VIRT_IMSIC_GROUP_MAX_SIZE;
|
|
imsic_size = IMSIC_HART_SIZE(imsic_guest_bits) *
|
|
s->soc[socket].num_harts;
|
|
imsic_regs[socket * 4 + 0] = 0;
|
|
imsic_regs[socket * 4 + 1] = cpu_to_be32(imsic_addr);
|
|
imsic_regs[socket * 4 + 2] = 0;
|
|
imsic_regs[socket * 4 + 3] = cpu_to_be32(imsic_size);
|
|
if (imsic_max_hart_per_socket < s->soc[socket].num_harts) {
|
|
imsic_max_hart_per_socket = s->soc[socket].num_harts;
|
|
}
|
|
}
|
|
|
|
imsic_name = g_strdup_printf("/soc/interrupt-controller@%lx",
|
|
(unsigned long)base_addr);
|
|
qemu_fdt_add_subnode(ms->fdt, imsic_name);
|
|
qemu_fdt_setprop_string_array(ms->fdt, imsic_name, "compatible",
|
|
(char **)&imsic_compat,
|
|
ARRAY_SIZE(imsic_compat));
|
|
|
|
qemu_fdt_setprop_cell(ms->fdt, imsic_name, "#interrupt-cells",
|
|
FDT_IMSIC_INT_CELLS);
|
|
qemu_fdt_setprop(ms->fdt, imsic_name, "interrupt-controller", NULL, 0);
|
|
qemu_fdt_setprop(ms->fdt, imsic_name, "msi-controller", NULL, 0);
|
|
qemu_fdt_setprop(ms->fdt, imsic_name, "interrupts-extended",
|
|
imsic_cells, ms->smp.cpus * sizeof(uint32_t) * 2);
|
|
qemu_fdt_setprop(ms->fdt, imsic_name, "reg", imsic_regs,
|
|
socket_count * sizeof(uint32_t) * 4);
|
|
qemu_fdt_setprop_cell(ms->fdt, imsic_name, "riscv,num-ids",
|
|
VIRT_IRQCHIP_NUM_MSIS);
|
|
|
|
if (imsic_guest_bits) {
|
|
qemu_fdt_setprop_cell(ms->fdt, imsic_name, "riscv,guest-index-bits",
|
|
imsic_guest_bits);
|
|
}
|
|
|
|
if (socket_count > 1) {
|
|
qemu_fdt_setprop_cell(ms->fdt, imsic_name, "riscv,hart-index-bits",
|
|
imsic_num_bits(imsic_max_hart_per_socket));
|
|
qemu_fdt_setprop_cell(ms->fdt, imsic_name, "riscv,group-index-bits",
|
|
imsic_num_bits(socket_count));
|
|
qemu_fdt_setprop_cell(ms->fdt, imsic_name, "riscv,group-index-shift",
|
|
IMSIC_MMIO_GROUP_MIN_SHIFT);
|
|
}
|
|
qemu_fdt_setprop_cell(ms->fdt, imsic_name, "phandle", msi_phandle);
|
|
}
|
|
|
|
static void create_fdt_imsic(RISCVVirtState *s, const MemMapEntry *memmap,
|
|
uint32_t *phandle, uint32_t *intc_phandles,
|
|
uint32_t *msi_m_phandle, uint32_t *msi_s_phandle)
|
|
{
|
|
*msi_m_phandle = (*phandle)++;
|
|
*msi_s_phandle = (*phandle)++;
|
|
|
|
if (!kvm_enabled()) {
|
|
/* M-level IMSIC node */
|
|
create_fdt_one_imsic(s, memmap[VIRT_IMSIC_M].base, intc_phandles,
|
|
*msi_m_phandle, true, 0);
|
|
}
|
|
|
|
/* S-level IMSIC node */
|
|
create_fdt_one_imsic(s, memmap[VIRT_IMSIC_S].base, intc_phandles,
|
|
*msi_s_phandle, false,
|
|
imsic_num_bits(s->aia_guests + 1));
|
|
|
|
}
|
|
|
|
/* Caller must free string after use */
|
|
static char *fdt_get_aplic_nodename(unsigned long aplic_addr)
|
|
{
|
|
return g_strdup_printf("/soc/interrupt-controller@%lx", aplic_addr);
|
|
}
|
|
|
|
static void create_fdt_one_aplic(RISCVVirtState *s, int socket,
|
|
unsigned long aplic_addr, uint32_t aplic_size,
|
|
uint32_t msi_phandle,
|
|
uint32_t *intc_phandles,
|
|
uint32_t aplic_phandle,
|
|
uint32_t aplic_child_phandle,
|
|
bool m_mode, int num_harts)
|
|
{
|
|
int cpu;
|
|
g_autofree char *aplic_name = fdt_get_aplic_nodename(aplic_addr);
|
|
g_autofree uint32_t *aplic_cells = g_new0(uint32_t, num_harts * 2);
|
|
MachineState *ms = MACHINE(s);
|
|
static const char * const aplic_compat[2] = {
|
|
"qemu,aplic", "riscv,aplic"
|
|
};
|
|
|
|
for (cpu = 0; cpu < num_harts; cpu++) {
|
|
aplic_cells[cpu * 2 + 0] = cpu_to_be32(intc_phandles[cpu]);
|
|
aplic_cells[cpu * 2 + 1] = cpu_to_be32(m_mode ? IRQ_M_EXT : IRQ_S_EXT);
|
|
}
|
|
|
|
qemu_fdt_add_subnode(ms->fdt, aplic_name);
|
|
qemu_fdt_setprop_string_array(ms->fdt, aplic_name, "compatible",
|
|
(char **)&aplic_compat,
|
|
ARRAY_SIZE(aplic_compat));
|
|
qemu_fdt_setprop_cell(ms->fdt, aplic_name, "#address-cells",
|
|
FDT_APLIC_ADDR_CELLS);
|
|
qemu_fdt_setprop_cell(ms->fdt, aplic_name,
|
|
"#interrupt-cells", FDT_APLIC_INT_CELLS);
|
|
qemu_fdt_setprop(ms->fdt, aplic_name, "interrupt-controller", NULL, 0);
|
|
|
|
if (s->aia_type == VIRT_AIA_TYPE_APLIC) {
|
|
qemu_fdt_setprop(ms->fdt, aplic_name, "interrupts-extended",
|
|
aplic_cells, num_harts * sizeof(uint32_t) * 2);
|
|
} else {
|
|
qemu_fdt_setprop_cell(ms->fdt, aplic_name, "msi-parent", msi_phandle);
|
|
}
|
|
|
|
qemu_fdt_setprop_cells(ms->fdt, aplic_name, "reg",
|
|
0x0, aplic_addr, 0x0, aplic_size);
|
|
qemu_fdt_setprop_cell(ms->fdt, aplic_name, "riscv,num-sources",
|
|
VIRT_IRQCHIP_NUM_SOURCES);
|
|
|
|
if (aplic_child_phandle) {
|
|
qemu_fdt_setprop_cell(ms->fdt, aplic_name, "riscv,children",
|
|
aplic_child_phandle);
|
|
qemu_fdt_setprop_cells(ms->fdt, aplic_name, "riscv,delegation",
|
|
aplic_child_phandle, 0x1,
|
|
VIRT_IRQCHIP_NUM_SOURCES);
|
|
/*
|
|
* DEPRECATED_9.1: Compat property kept temporarily
|
|
* to allow old firmwares to work with AIA. Do *not*
|
|
* use 'riscv,delegate' in new code: use
|
|
* 'riscv,delegation' instead.
|
|
*/
|
|
qemu_fdt_setprop_cells(ms->fdt, aplic_name, "riscv,delegate",
|
|
aplic_child_phandle, 0x1,
|
|
VIRT_IRQCHIP_NUM_SOURCES);
|
|
}
|
|
|
|
riscv_socket_fdt_write_id(ms, aplic_name, socket);
|
|
qemu_fdt_setprop_cell(ms->fdt, aplic_name, "phandle", aplic_phandle);
|
|
}
|
|
|
|
static void create_fdt_socket_aplic(RISCVVirtState *s,
|
|
const MemMapEntry *memmap, int socket,
|
|
uint32_t msi_m_phandle,
|
|
uint32_t msi_s_phandle,
|
|
uint32_t *phandle,
|
|
uint32_t *intc_phandles,
|
|
uint32_t *aplic_phandles,
|
|
int num_harts)
|
|
{
|
|
unsigned long aplic_addr;
|
|
MachineState *ms = MACHINE(s);
|
|
uint32_t aplic_m_phandle, aplic_s_phandle;
|
|
|
|
aplic_m_phandle = (*phandle)++;
|
|
aplic_s_phandle = (*phandle)++;
|
|
|
|
if (!kvm_enabled()) {
|
|
/* M-level APLIC node */
|
|
aplic_addr = memmap[VIRT_APLIC_M].base +
|
|
(memmap[VIRT_APLIC_M].size * socket);
|
|
create_fdt_one_aplic(s, socket, aplic_addr, memmap[VIRT_APLIC_M].size,
|
|
msi_m_phandle, intc_phandles,
|
|
aplic_m_phandle, aplic_s_phandle,
|
|
true, num_harts);
|
|
}
|
|
|
|
/* S-level APLIC node */
|
|
aplic_addr = memmap[VIRT_APLIC_S].base +
|
|
(memmap[VIRT_APLIC_S].size * socket);
|
|
create_fdt_one_aplic(s, socket, aplic_addr, memmap[VIRT_APLIC_S].size,
|
|
msi_s_phandle, intc_phandles,
|
|
aplic_s_phandle, 0,
|
|
false, num_harts);
|
|
|
|
if (!socket) {
|
|
g_autofree char *aplic_name = fdt_get_aplic_nodename(aplic_addr);
|
|
platform_bus_add_all_fdt_nodes(ms->fdt, aplic_name,
|
|
memmap[VIRT_PLATFORM_BUS].base,
|
|
memmap[VIRT_PLATFORM_BUS].size,
|
|
VIRT_PLATFORM_BUS_IRQ);
|
|
}
|
|
|
|
aplic_phandles[socket] = aplic_s_phandle;
|
|
}
|
|
|
|
static void create_fdt_pmu(RISCVVirtState *s)
|
|
{
|
|
g_autofree char *pmu_name = g_strdup_printf("/pmu");
|
|
MachineState *ms = MACHINE(s);
|
|
RISCVCPU hart = s->soc[0].harts[0];
|
|
|
|
qemu_fdt_add_subnode(ms->fdt, pmu_name);
|
|
qemu_fdt_setprop_string(ms->fdt, pmu_name, "compatible", "riscv,pmu");
|
|
riscv_pmu_generate_fdt_node(ms->fdt, hart.pmu_avail_ctrs, pmu_name);
|
|
}
|
|
|
|
static void create_fdt_sockets(RISCVVirtState *s, const MemMapEntry *memmap,
|
|
uint32_t *phandle,
|
|
uint32_t *irq_mmio_phandle,
|
|
uint32_t *irq_pcie_phandle,
|
|
uint32_t *irq_virtio_phandle,
|
|
uint32_t *msi_pcie_phandle)
|
|
{
|
|
int socket, phandle_pos;
|
|
MachineState *ms = MACHINE(s);
|
|
uint32_t msi_m_phandle = 0, msi_s_phandle = 0;
|
|
uint32_t xplic_phandles[MAX_NODES];
|
|
g_autofree uint32_t *intc_phandles = NULL;
|
|
int socket_count = riscv_socket_count(ms);
|
|
|
|
qemu_fdt_add_subnode(ms->fdt, "/cpus");
|
|
qemu_fdt_setprop_cell(ms->fdt, "/cpus", "timebase-frequency",
|
|
kvm_enabled() ?
|
|
kvm_riscv_get_timebase_frequency(first_cpu) :
|
|
RISCV_ACLINT_DEFAULT_TIMEBASE_FREQ);
|
|
qemu_fdt_setprop_cell(ms->fdt, "/cpus", "#size-cells", 0x0);
|
|
qemu_fdt_setprop_cell(ms->fdt, "/cpus", "#address-cells", 0x1);
|
|
qemu_fdt_add_subnode(ms->fdt, "/cpus/cpu-map");
|
|
|
|
intc_phandles = g_new0(uint32_t, ms->smp.cpus);
|
|
|
|
phandle_pos = ms->smp.cpus;
|
|
for (socket = (socket_count - 1); socket >= 0; socket--) {
|
|
g_autofree char *clust_name = NULL;
|
|
phandle_pos -= s->soc[socket].num_harts;
|
|
|
|
clust_name = g_strdup_printf("/cpus/cpu-map/cluster%d", socket);
|
|
qemu_fdt_add_subnode(ms->fdt, clust_name);
|
|
|
|
create_fdt_socket_cpus(s, socket, clust_name, phandle,
|
|
&intc_phandles[phandle_pos]);
|
|
|
|
create_fdt_socket_memory(s, memmap, socket);
|
|
|
|
if (virt_aclint_allowed() && s->have_aclint) {
|
|
create_fdt_socket_aclint(s, memmap, socket,
|
|
&intc_phandles[phandle_pos]);
|
|
} else if (tcg_enabled()) {
|
|
create_fdt_socket_clint(s, memmap, socket,
|
|
&intc_phandles[phandle_pos]);
|
|
}
|
|
}
|
|
|
|
if (s->aia_type == VIRT_AIA_TYPE_APLIC_IMSIC) {
|
|
create_fdt_imsic(s, memmap, phandle, intc_phandles,
|
|
&msi_m_phandle, &msi_s_phandle);
|
|
*msi_pcie_phandle = msi_s_phandle;
|
|
}
|
|
|
|
/* KVM AIA only has one APLIC instance */
|
|
if (kvm_enabled() && virt_use_kvm_aia(s)) {
|
|
create_fdt_socket_aplic(s, memmap, 0,
|
|
msi_m_phandle, msi_s_phandle, phandle,
|
|
&intc_phandles[0], xplic_phandles,
|
|
ms->smp.cpus);
|
|
} else {
|
|
phandle_pos = ms->smp.cpus;
|
|
for (socket = (socket_count - 1); socket >= 0; socket--) {
|
|
phandle_pos -= s->soc[socket].num_harts;
|
|
|
|
if (s->aia_type == VIRT_AIA_TYPE_NONE) {
|
|
create_fdt_socket_plic(s, memmap, socket, phandle,
|
|
&intc_phandles[phandle_pos],
|
|
xplic_phandles);
|
|
} else {
|
|
create_fdt_socket_aplic(s, memmap, socket,
|
|
msi_m_phandle, msi_s_phandle, phandle,
|
|
&intc_phandles[phandle_pos],
|
|
xplic_phandles,
|
|
s->soc[socket].num_harts);
|
|
}
|
|
}
|
|
}
|
|
|
|
if (kvm_enabled() && virt_use_kvm_aia(s)) {
|
|
*irq_mmio_phandle = xplic_phandles[0];
|
|
*irq_virtio_phandle = xplic_phandles[0];
|
|
*irq_pcie_phandle = xplic_phandles[0];
|
|
} else {
|
|
for (socket = 0; socket < socket_count; socket++) {
|
|
if (socket == 0) {
|
|
*irq_mmio_phandle = xplic_phandles[socket];
|
|
*irq_virtio_phandle = xplic_phandles[socket];
|
|
*irq_pcie_phandle = xplic_phandles[socket];
|
|
}
|
|
if (socket == 1) {
|
|
*irq_virtio_phandle = xplic_phandles[socket];
|
|
*irq_pcie_phandle = xplic_phandles[socket];
|
|
}
|
|
if (socket == 2) {
|
|
*irq_pcie_phandle = xplic_phandles[socket];
|
|
}
|
|
}
|
|
}
|
|
|
|
riscv_socket_fdt_write_distance_matrix(ms);
|
|
}
|
|
|
|
static void create_fdt_virtio(RISCVVirtState *s, const MemMapEntry *memmap,
|
|
uint32_t irq_virtio_phandle)
|
|
{
|
|
int i;
|
|
MachineState *ms = MACHINE(s);
|
|
|
|
for (i = 0; i < VIRTIO_COUNT; i++) {
|
|
g_autofree char *name = g_strdup_printf("/soc/virtio_mmio@%lx",
|
|
(long)(memmap[VIRT_VIRTIO].base + i * memmap[VIRT_VIRTIO].size));
|
|
|
|
qemu_fdt_add_subnode(ms->fdt, name);
|
|
qemu_fdt_setprop_string(ms->fdt, name, "compatible", "virtio,mmio");
|
|
qemu_fdt_setprop_cells(ms->fdt, name, "reg",
|
|
0x0, memmap[VIRT_VIRTIO].base + i * memmap[VIRT_VIRTIO].size,
|
|
0x0, memmap[VIRT_VIRTIO].size);
|
|
qemu_fdt_setprop_cell(ms->fdt, name, "interrupt-parent",
|
|
irq_virtio_phandle);
|
|
if (s->aia_type == VIRT_AIA_TYPE_NONE) {
|
|
qemu_fdt_setprop_cell(ms->fdt, name, "interrupts",
|
|
VIRTIO_IRQ + i);
|
|
} else {
|
|
qemu_fdt_setprop_cells(ms->fdt, name, "interrupts",
|
|
VIRTIO_IRQ + i, 0x4);
|
|
}
|
|
}
|
|
}
|
|
|
|
static void create_fdt_pcie(RISCVVirtState *s, const MemMapEntry *memmap,
|
|
uint32_t irq_pcie_phandle,
|
|
uint32_t msi_pcie_phandle)
|
|
{
|
|
g_autofree char *name = NULL;
|
|
MachineState *ms = MACHINE(s);
|
|
|
|
name = g_strdup_printf("/soc/pci@%lx",
|
|
(long) memmap[VIRT_PCIE_ECAM].base);
|
|
qemu_fdt_setprop_cell(ms->fdt, name, "#address-cells",
|
|
FDT_PCI_ADDR_CELLS);
|
|
qemu_fdt_setprop_cell(ms->fdt, name, "#interrupt-cells",
|
|
FDT_PCI_INT_CELLS);
|
|
qemu_fdt_setprop_cell(ms->fdt, name, "#size-cells", 0x2);
|
|
qemu_fdt_setprop_string(ms->fdt, name, "compatible",
|
|
"pci-host-ecam-generic");
|
|
qemu_fdt_setprop_string(ms->fdt, name, "device_type", "pci");
|
|
qemu_fdt_setprop_cell(ms->fdt, name, "linux,pci-domain", 0);
|
|
qemu_fdt_setprop_cells(ms->fdt, name, "bus-range", 0,
|
|
memmap[VIRT_PCIE_ECAM].size / PCIE_MMCFG_SIZE_MIN - 1);
|
|
qemu_fdt_setprop(ms->fdt, name, "dma-coherent", NULL, 0);
|
|
if (s->aia_type == VIRT_AIA_TYPE_APLIC_IMSIC) {
|
|
qemu_fdt_setprop_cell(ms->fdt, name, "msi-parent", msi_pcie_phandle);
|
|
}
|
|
qemu_fdt_setprop_cells(ms->fdt, name, "reg", 0,
|
|
memmap[VIRT_PCIE_ECAM].base, 0, memmap[VIRT_PCIE_ECAM].size);
|
|
qemu_fdt_setprop_sized_cells(ms->fdt, name, "ranges",
|
|
1, FDT_PCI_RANGE_IOPORT, 2, 0,
|
|
2, memmap[VIRT_PCIE_PIO].base, 2, memmap[VIRT_PCIE_PIO].size,
|
|
1, FDT_PCI_RANGE_MMIO,
|
|
2, memmap[VIRT_PCIE_MMIO].base,
|
|
2, memmap[VIRT_PCIE_MMIO].base, 2, memmap[VIRT_PCIE_MMIO].size,
|
|
1, FDT_PCI_RANGE_MMIO_64BIT,
|
|
2, virt_high_pcie_memmap.base,
|
|
2, virt_high_pcie_memmap.base, 2, virt_high_pcie_memmap.size);
|
|
|
|
create_pcie_irq_map(s, ms->fdt, name, irq_pcie_phandle);
|
|
}
|
|
|
|
static void create_fdt_reset(RISCVVirtState *s, const MemMapEntry *memmap,
|
|
uint32_t *phandle)
|
|
{
|
|
char *name;
|
|
uint32_t test_phandle;
|
|
MachineState *ms = MACHINE(s);
|
|
|
|
test_phandle = (*phandle)++;
|
|
name = g_strdup_printf("/soc/test@%lx",
|
|
(long)memmap[VIRT_TEST].base);
|
|
qemu_fdt_add_subnode(ms->fdt, name);
|
|
{
|
|
static const char * const compat[3] = {
|
|
"sifive,test1", "sifive,test0", "syscon"
|
|
};
|
|
qemu_fdt_setprop_string_array(ms->fdt, name, "compatible",
|
|
(char **)&compat, ARRAY_SIZE(compat));
|
|
}
|
|
qemu_fdt_setprop_cells(ms->fdt, name, "reg",
|
|
0x0, memmap[VIRT_TEST].base, 0x0, memmap[VIRT_TEST].size);
|
|
qemu_fdt_setprop_cell(ms->fdt, name, "phandle", test_phandle);
|
|
test_phandle = qemu_fdt_get_phandle(ms->fdt, name);
|
|
g_free(name);
|
|
|
|
name = g_strdup_printf("/reboot");
|
|
qemu_fdt_add_subnode(ms->fdt, name);
|
|
qemu_fdt_setprop_string(ms->fdt, name, "compatible", "syscon-reboot");
|
|
qemu_fdt_setprop_cell(ms->fdt, name, "regmap", test_phandle);
|
|
qemu_fdt_setprop_cell(ms->fdt, name, "offset", 0x0);
|
|
qemu_fdt_setprop_cell(ms->fdt, name, "value", FINISHER_RESET);
|
|
g_free(name);
|
|
|
|
name = g_strdup_printf("/poweroff");
|
|
qemu_fdt_add_subnode(ms->fdt, name);
|
|
qemu_fdt_setprop_string(ms->fdt, name, "compatible", "syscon-poweroff");
|
|
qemu_fdt_setprop_cell(ms->fdt, name, "regmap", test_phandle);
|
|
qemu_fdt_setprop_cell(ms->fdt, name, "offset", 0x0);
|
|
qemu_fdt_setprop_cell(ms->fdt, name, "value", FINISHER_PASS);
|
|
g_free(name);
|
|
}
|
|
|
|
static void create_fdt_uart(RISCVVirtState *s, const MemMapEntry *memmap,
|
|
uint32_t irq_mmio_phandle)
|
|
{
|
|
g_autofree char *name = NULL;
|
|
MachineState *ms = MACHINE(s);
|
|
|
|
name = g_strdup_printf("/soc/serial@%lx", (long)memmap[VIRT_UART0].base);
|
|
qemu_fdt_add_subnode(ms->fdt, name);
|
|
qemu_fdt_setprop_string(ms->fdt, name, "compatible", "ns16550a");
|
|
qemu_fdt_setprop_cells(ms->fdt, name, "reg",
|
|
0x0, memmap[VIRT_UART0].base,
|
|
0x0, memmap[VIRT_UART0].size);
|
|
qemu_fdt_setprop_cell(ms->fdt, name, "clock-frequency", 3686400);
|
|
qemu_fdt_setprop_cell(ms->fdt, name, "interrupt-parent", irq_mmio_phandle);
|
|
if (s->aia_type == VIRT_AIA_TYPE_NONE) {
|
|
qemu_fdt_setprop_cell(ms->fdt, name, "interrupts", UART0_IRQ);
|
|
} else {
|
|
qemu_fdt_setprop_cells(ms->fdt, name, "interrupts", UART0_IRQ, 0x4);
|
|
}
|
|
|
|
qemu_fdt_setprop_string(ms->fdt, "/chosen", "stdout-path", name);
|
|
}
|
|
|
|
static void create_fdt_rtc(RISCVVirtState *s, const MemMapEntry *memmap,
|
|
uint32_t irq_mmio_phandle)
|
|
{
|
|
g_autofree char *name = NULL;
|
|
MachineState *ms = MACHINE(s);
|
|
|
|
name = g_strdup_printf("/soc/rtc@%lx", (long)memmap[VIRT_RTC].base);
|
|
qemu_fdt_add_subnode(ms->fdt, name);
|
|
qemu_fdt_setprop_string(ms->fdt, name, "compatible",
|
|
"google,goldfish-rtc");
|
|
qemu_fdt_setprop_cells(ms->fdt, name, "reg",
|
|
0x0, memmap[VIRT_RTC].base, 0x0, memmap[VIRT_RTC].size);
|
|
qemu_fdt_setprop_cell(ms->fdt, name, "interrupt-parent",
|
|
irq_mmio_phandle);
|
|
if (s->aia_type == VIRT_AIA_TYPE_NONE) {
|
|
qemu_fdt_setprop_cell(ms->fdt, name, "interrupts", RTC_IRQ);
|
|
} else {
|
|
qemu_fdt_setprop_cells(ms->fdt, name, "interrupts", RTC_IRQ, 0x4);
|
|
}
|
|
}
|
|
|
|
static void create_fdt_flash(RISCVVirtState *s, const MemMapEntry *memmap)
|
|
{
|
|
MachineState *ms = MACHINE(s);
|
|
hwaddr flashsize = virt_memmap[VIRT_FLASH].size / 2;
|
|
hwaddr flashbase = virt_memmap[VIRT_FLASH].base;
|
|
g_autofree char *name = g_strdup_printf("/flash@%" PRIx64, flashbase);
|
|
|
|
qemu_fdt_add_subnode(ms->fdt, name);
|
|
qemu_fdt_setprop_string(ms->fdt, name, "compatible", "cfi-flash");
|
|
qemu_fdt_setprop_sized_cells(ms->fdt, name, "reg",
|
|
2, flashbase, 2, flashsize,
|
|
2, flashbase + flashsize, 2, flashsize);
|
|
qemu_fdt_setprop_cell(ms->fdt, name, "bank-width", 4);
|
|
}
|
|
|
|
static void create_fdt_fw_cfg(RISCVVirtState *s, const MemMapEntry *memmap)
|
|
{
|
|
MachineState *ms = MACHINE(s);
|
|
hwaddr base = memmap[VIRT_FW_CFG].base;
|
|
hwaddr size = memmap[VIRT_FW_CFG].size;
|
|
g_autofree char *nodename = g_strdup_printf("/fw-cfg@%" PRIx64, base);
|
|
|
|
qemu_fdt_add_subnode(ms->fdt, nodename);
|
|
qemu_fdt_setprop_string(ms->fdt, nodename,
|
|
"compatible", "qemu,fw-cfg-mmio");
|
|
qemu_fdt_setprop_sized_cells(ms->fdt, nodename, "reg",
|
|
2, base, 2, size);
|
|
qemu_fdt_setprop(ms->fdt, nodename, "dma-coherent", NULL, 0);
|
|
}
|
|
|
|
static void create_fdt_virtio_iommu(RISCVVirtState *s, uint16_t bdf)
|
|
{
|
|
const char compat[] = "virtio,pci-iommu\0pci1af4,1057";
|
|
void *fdt = MACHINE(s)->fdt;
|
|
uint32_t iommu_phandle;
|
|
g_autofree char *iommu_node = NULL;
|
|
g_autofree char *pci_node = NULL;
|
|
|
|
pci_node = g_strdup_printf("/soc/pci@%lx",
|
|
(long) virt_memmap[VIRT_PCIE_ECAM].base);
|
|
iommu_node = g_strdup_printf("%s/virtio_iommu@%x,%x", pci_node,
|
|
PCI_SLOT(bdf), PCI_FUNC(bdf));
|
|
iommu_phandle = qemu_fdt_alloc_phandle(fdt);
|
|
|
|
qemu_fdt_add_subnode(fdt, iommu_node);
|
|
|
|
qemu_fdt_setprop(fdt, iommu_node, "compatible", compat, sizeof(compat));
|
|
qemu_fdt_setprop_sized_cells(fdt, iommu_node, "reg",
|
|
1, bdf << 8, 1, 0, 1, 0,
|
|
1, 0, 1, 0);
|
|
qemu_fdt_setprop_cell(fdt, iommu_node, "#iommu-cells", 1);
|
|
qemu_fdt_setprop_cell(fdt, iommu_node, "phandle", iommu_phandle);
|
|
|
|
qemu_fdt_setprop_cells(fdt, pci_node, "iommu-map",
|
|
0, iommu_phandle, 0, bdf,
|
|
bdf + 1, iommu_phandle, bdf + 1, 0xffff - bdf);
|
|
}
|
|
|
|
static void finalize_fdt(RISCVVirtState *s)
|
|
{
|
|
uint32_t phandle = 1, irq_mmio_phandle = 1, msi_pcie_phandle = 1;
|
|
uint32_t irq_pcie_phandle = 1, irq_virtio_phandle = 1;
|
|
|
|
create_fdt_sockets(s, virt_memmap, &phandle, &irq_mmio_phandle,
|
|
&irq_pcie_phandle, &irq_virtio_phandle,
|
|
&msi_pcie_phandle);
|
|
|
|
create_fdt_virtio(s, virt_memmap, irq_virtio_phandle);
|
|
|
|
create_fdt_pcie(s, virt_memmap, irq_pcie_phandle, msi_pcie_phandle);
|
|
|
|
create_fdt_reset(s, virt_memmap, &phandle);
|
|
|
|
create_fdt_uart(s, virt_memmap, irq_mmio_phandle);
|
|
|
|
create_fdt_rtc(s, virt_memmap, irq_mmio_phandle);
|
|
}
|
|
|
|
static void create_fdt(RISCVVirtState *s, const MemMapEntry *memmap)
|
|
{
|
|
MachineState *ms = MACHINE(s);
|
|
uint8_t rng_seed[32];
|
|
g_autofree char *name = NULL;
|
|
|
|
ms->fdt = create_device_tree(&s->fdt_size);
|
|
if (!ms->fdt) {
|
|
error_report("create_device_tree() failed");
|
|
exit(1);
|
|
}
|
|
|
|
qemu_fdt_setprop_string(ms->fdt, "/", "model", "riscv-virtio,qemu");
|
|
qemu_fdt_setprop_string(ms->fdt, "/", "compatible", "riscv-virtio");
|
|
qemu_fdt_setprop_cell(ms->fdt, "/", "#size-cells", 0x2);
|
|
qemu_fdt_setprop_cell(ms->fdt, "/", "#address-cells", 0x2);
|
|
|
|
qemu_fdt_add_subnode(ms->fdt, "/soc");
|
|
qemu_fdt_setprop(ms->fdt, "/soc", "ranges", NULL, 0);
|
|
qemu_fdt_setprop_string(ms->fdt, "/soc", "compatible", "simple-bus");
|
|
qemu_fdt_setprop_cell(ms->fdt, "/soc", "#size-cells", 0x2);
|
|
qemu_fdt_setprop_cell(ms->fdt, "/soc", "#address-cells", 0x2);
|
|
|
|
/*
|
|
* The "/soc/pci@..." node is needed for PCIE hotplugs
|
|
* that might happen before finalize_fdt().
|
|
*/
|
|
name = g_strdup_printf("/soc/pci@%lx", (long) memmap[VIRT_PCIE_ECAM].base);
|
|
qemu_fdt_add_subnode(ms->fdt, name);
|
|
|
|
qemu_fdt_add_subnode(ms->fdt, "/chosen");
|
|
|
|
/* Pass seed to RNG */
|
|
qemu_guest_getrandom_nofail(rng_seed, sizeof(rng_seed));
|
|
qemu_fdt_setprop(ms->fdt, "/chosen", "rng-seed",
|
|
rng_seed, sizeof(rng_seed));
|
|
|
|
create_fdt_flash(s, memmap);
|
|
create_fdt_fw_cfg(s, memmap);
|
|
create_fdt_pmu(s);
|
|
}
|
|
|
|
static inline DeviceState *gpex_pcie_init(MemoryRegion *sys_mem,
|
|
DeviceState *irqchip,
|
|
RISCVVirtState *s)
|
|
{
|
|
DeviceState *dev;
|
|
MemoryRegion *ecam_alias, *ecam_reg;
|
|
MemoryRegion *mmio_alias, *high_mmio_alias, *mmio_reg;
|
|
hwaddr ecam_base = s->memmap[VIRT_PCIE_ECAM].base;
|
|
hwaddr ecam_size = s->memmap[VIRT_PCIE_ECAM].size;
|
|
hwaddr mmio_base = s->memmap[VIRT_PCIE_MMIO].base;
|
|
hwaddr mmio_size = s->memmap[VIRT_PCIE_MMIO].size;
|
|
hwaddr high_mmio_base = virt_high_pcie_memmap.base;
|
|
hwaddr high_mmio_size = virt_high_pcie_memmap.size;
|
|
hwaddr pio_base = s->memmap[VIRT_PCIE_PIO].base;
|
|
hwaddr pio_size = s->memmap[VIRT_PCIE_PIO].size;
|
|
qemu_irq irq;
|
|
int i;
|
|
|
|
dev = qdev_new(TYPE_GPEX_HOST);
|
|
|
|
/* Set GPEX object properties for the virt machine */
|
|
object_property_set_uint(OBJECT(GPEX_HOST(dev)), PCI_HOST_ECAM_BASE,
|
|
ecam_base, NULL);
|
|
object_property_set_int(OBJECT(GPEX_HOST(dev)), PCI_HOST_ECAM_SIZE,
|
|
ecam_size, NULL);
|
|
object_property_set_uint(OBJECT(GPEX_HOST(dev)),
|
|
PCI_HOST_BELOW_4G_MMIO_BASE,
|
|
mmio_base, NULL);
|
|
object_property_set_int(OBJECT(GPEX_HOST(dev)), PCI_HOST_BELOW_4G_MMIO_SIZE,
|
|
mmio_size, NULL);
|
|
object_property_set_uint(OBJECT(GPEX_HOST(dev)),
|
|
PCI_HOST_ABOVE_4G_MMIO_BASE,
|
|
high_mmio_base, NULL);
|
|
object_property_set_int(OBJECT(GPEX_HOST(dev)), PCI_HOST_ABOVE_4G_MMIO_SIZE,
|
|
high_mmio_size, NULL);
|
|
object_property_set_uint(OBJECT(GPEX_HOST(dev)), PCI_HOST_PIO_BASE,
|
|
pio_base, NULL);
|
|
object_property_set_int(OBJECT(GPEX_HOST(dev)), PCI_HOST_PIO_SIZE,
|
|
pio_size, NULL);
|
|
|
|
sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), &error_fatal);
|
|
|
|
ecam_alias = g_new0(MemoryRegion, 1);
|
|
ecam_reg = sysbus_mmio_get_region(SYS_BUS_DEVICE(dev), 0);
|
|
memory_region_init_alias(ecam_alias, OBJECT(dev), "pcie-ecam",
|
|
ecam_reg, 0, ecam_size);
|
|
memory_region_add_subregion(get_system_memory(), ecam_base, ecam_alias);
|
|
|
|
mmio_alias = g_new0(MemoryRegion, 1);
|
|
mmio_reg = sysbus_mmio_get_region(SYS_BUS_DEVICE(dev), 1);
|
|
memory_region_init_alias(mmio_alias, OBJECT(dev), "pcie-mmio",
|
|
mmio_reg, mmio_base, mmio_size);
|
|
memory_region_add_subregion(get_system_memory(), mmio_base, mmio_alias);
|
|
|
|
/* Map high MMIO space */
|
|
high_mmio_alias = g_new0(MemoryRegion, 1);
|
|
memory_region_init_alias(high_mmio_alias, OBJECT(dev), "pcie-mmio-high",
|
|
mmio_reg, high_mmio_base, high_mmio_size);
|
|
memory_region_add_subregion(get_system_memory(), high_mmio_base,
|
|
high_mmio_alias);
|
|
|
|
sysbus_mmio_map(SYS_BUS_DEVICE(dev), 2, pio_base);
|
|
|
|
for (i = 0; i < GPEX_NUM_IRQS; i++) {
|
|
irq = qdev_get_gpio_in(irqchip, PCIE_IRQ + i);
|
|
|
|
sysbus_connect_irq(SYS_BUS_DEVICE(dev), i, irq);
|
|
gpex_set_irq_num(GPEX_HOST(dev), i, PCIE_IRQ + i);
|
|
}
|
|
|
|
GPEX_HOST(dev)->gpex_cfg.bus = PCI_HOST_BRIDGE(GPEX_HOST(dev))->bus;
|
|
return dev;
|
|
}
|
|
|
|
static FWCfgState *create_fw_cfg(const MachineState *ms)
|
|
{
|
|
hwaddr base = virt_memmap[VIRT_FW_CFG].base;
|
|
FWCfgState *fw_cfg;
|
|
|
|
fw_cfg = fw_cfg_init_mem_wide(base + 8, base, 8, base + 16,
|
|
&address_space_memory);
|
|
fw_cfg_add_i16(fw_cfg, FW_CFG_NB_CPUS, (uint16_t)ms->smp.cpus);
|
|
|
|
return fw_cfg;
|
|
}
|
|
|
|
static DeviceState *virt_create_plic(const MemMapEntry *memmap, int socket,
|
|
int base_hartid, int hart_count)
|
|
{
|
|
DeviceState *ret;
|
|
g_autofree char *plic_hart_config = NULL;
|
|
|
|
/* Per-socket PLIC hart topology configuration string */
|
|
plic_hart_config = riscv_plic_hart_config_string(hart_count);
|
|
|
|
/* Per-socket PLIC */
|
|
ret = sifive_plic_create(
|
|
memmap[VIRT_PLIC].base + socket * memmap[VIRT_PLIC].size,
|
|
plic_hart_config, hart_count, base_hartid,
|
|
VIRT_IRQCHIP_NUM_SOURCES,
|
|
((1U << VIRT_IRQCHIP_NUM_PRIO_BITS) - 1),
|
|
VIRT_PLIC_PRIORITY_BASE,
|
|
VIRT_PLIC_PENDING_BASE,
|
|
VIRT_PLIC_ENABLE_BASE,
|
|
VIRT_PLIC_ENABLE_STRIDE,
|
|
VIRT_PLIC_CONTEXT_BASE,
|
|
VIRT_PLIC_CONTEXT_STRIDE,
|
|
memmap[VIRT_PLIC].size);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static DeviceState *virt_create_aia(RISCVVirtAIAType aia_type, int aia_guests,
|
|
const MemMapEntry *memmap, int socket,
|
|
int base_hartid, int hart_count)
|
|
{
|
|
int i;
|
|
hwaddr addr;
|
|
uint32_t guest_bits;
|
|
DeviceState *aplic_s = NULL;
|
|
DeviceState *aplic_m = NULL;
|
|
bool msimode = aia_type == VIRT_AIA_TYPE_APLIC_IMSIC;
|
|
|
|
if (msimode) {
|
|
if (!kvm_enabled()) {
|
|
/* Per-socket M-level IMSICs */
|
|
addr = memmap[VIRT_IMSIC_M].base +
|
|
socket * VIRT_IMSIC_GROUP_MAX_SIZE;
|
|
for (i = 0; i < hart_count; i++) {
|
|
riscv_imsic_create(addr + i * IMSIC_HART_SIZE(0),
|
|
base_hartid + i, true, 1,
|
|
VIRT_IRQCHIP_NUM_MSIS);
|
|
}
|
|
}
|
|
|
|
/* Per-socket S-level IMSICs */
|
|
guest_bits = imsic_num_bits(aia_guests + 1);
|
|
addr = memmap[VIRT_IMSIC_S].base + socket * VIRT_IMSIC_GROUP_MAX_SIZE;
|
|
for (i = 0; i < hart_count; i++) {
|
|
riscv_imsic_create(addr + i * IMSIC_HART_SIZE(guest_bits),
|
|
base_hartid + i, false, 1 + aia_guests,
|
|
VIRT_IRQCHIP_NUM_MSIS);
|
|
}
|
|
}
|
|
|
|
if (!kvm_enabled()) {
|
|
/* Per-socket M-level APLIC */
|
|
aplic_m = riscv_aplic_create(memmap[VIRT_APLIC_M].base +
|
|
socket * memmap[VIRT_APLIC_M].size,
|
|
memmap[VIRT_APLIC_M].size,
|
|
(msimode) ? 0 : base_hartid,
|
|
(msimode) ? 0 : hart_count,
|
|
VIRT_IRQCHIP_NUM_SOURCES,
|
|
VIRT_IRQCHIP_NUM_PRIO_BITS,
|
|
msimode, true, NULL);
|
|
}
|
|
|
|
/* Per-socket S-level APLIC */
|
|
aplic_s = riscv_aplic_create(memmap[VIRT_APLIC_S].base +
|
|
socket * memmap[VIRT_APLIC_S].size,
|
|
memmap[VIRT_APLIC_S].size,
|
|
(msimode) ? 0 : base_hartid,
|
|
(msimode) ? 0 : hart_count,
|
|
VIRT_IRQCHIP_NUM_SOURCES,
|
|
VIRT_IRQCHIP_NUM_PRIO_BITS,
|
|
msimode, false, aplic_m);
|
|
|
|
return kvm_enabled() ? aplic_s : aplic_m;
|
|
}
|
|
|
|
static void create_platform_bus(RISCVVirtState *s, DeviceState *irqchip)
|
|
{
|
|
DeviceState *dev;
|
|
SysBusDevice *sysbus;
|
|
const MemMapEntry *memmap = virt_memmap;
|
|
int i;
|
|
MemoryRegion *sysmem = get_system_memory();
|
|
|
|
dev = qdev_new(TYPE_PLATFORM_BUS_DEVICE);
|
|
dev->id = g_strdup(TYPE_PLATFORM_BUS_DEVICE);
|
|
qdev_prop_set_uint32(dev, "num_irqs", VIRT_PLATFORM_BUS_NUM_IRQS);
|
|
qdev_prop_set_uint32(dev, "mmio_size", memmap[VIRT_PLATFORM_BUS].size);
|
|
sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), &error_fatal);
|
|
s->platform_bus_dev = dev;
|
|
|
|
sysbus = SYS_BUS_DEVICE(dev);
|
|
for (i = 0; i < VIRT_PLATFORM_BUS_NUM_IRQS; i++) {
|
|
int irq = VIRT_PLATFORM_BUS_IRQ + i;
|
|
sysbus_connect_irq(sysbus, i, qdev_get_gpio_in(irqchip, irq));
|
|
}
|
|
|
|
memory_region_add_subregion(sysmem,
|
|
memmap[VIRT_PLATFORM_BUS].base,
|
|
sysbus_mmio_get_region(sysbus, 0));
|
|
}
|
|
|
|
static void virt_build_smbios(RISCVVirtState *s)
|
|
{
|
|
MachineClass *mc = MACHINE_GET_CLASS(s);
|
|
MachineState *ms = MACHINE(s);
|
|
uint8_t *smbios_tables, *smbios_anchor;
|
|
size_t smbios_tables_len, smbios_anchor_len;
|
|
struct smbios_phys_mem_area mem_array;
|
|
const char *product = "QEMU Virtual Machine";
|
|
|
|
if (kvm_enabled()) {
|
|
product = "KVM Virtual Machine";
|
|
}
|
|
|
|
smbios_set_defaults("QEMU", product, mc->name);
|
|
|
|
if (riscv_is_32bit(&s->soc[0])) {
|
|
smbios_set_default_processor_family(0x200);
|
|
} else {
|
|
smbios_set_default_processor_family(0x201);
|
|
}
|
|
|
|
/* build the array of physical mem area from base_memmap */
|
|
mem_array.address = s->memmap[VIRT_DRAM].base;
|
|
mem_array.length = ms->ram_size;
|
|
|
|
smbios_get_tables(ms, SMBIOS_ENTRY_POINT_TYPE_64,
|
|
&mem_array, 1,
|
|
&smbios_tables, &smbios_tables_len,
|
|
&smbios_anchor, &smbios_anchor_len,
|
|
&error_fatal);
|
|
|
|
if (smbios_anchor) {
|
|
fw_cfg_add_file(s->fw_cfg, "etc/smbios/smbios-tables",
|
|
smbios_tables, smbios_tables_len);
|
|
fw_cfg_add_file(s->fw_cfg, "etc/smbios/smbios-anchor",
|
|
smbios_anchor, smbios_anchor_len);
|
|
}
|
|
}
|
|
|
|
static void virt_machine_done(Notifier *notifier, void *data)
|
|
{
|
|
RISCVVirtState *s = container_of(notifier, RISCVVirtState,
|
|
machine_done);
|
|
const MemMapEntry *memmap = virt_memmap;
|
|
MachineState *machine = MACHINE(s);
|
|
hwaddr start_addr = memmap[VIRT_DRAM].base;
|
|
target_ulong firmware_end_addr, kernel_start_addr;
|
|
const char *firmware_name = riscv_default_firmware_name(&s->soc[0]);
|
|
uint64_t fdt_load_addr;
|
|
uint64_t kernel_entry = 0;
|
|
BlockBackend *pflash_blk0;
|
|
|
|
/*
|
|
* An user provided dtb must include everything, including
|
|
* dynamic sysbus devices. Our FDT needs to be finalized.
|
|
*/
|
|
if (machine->dtb == NULL) {
|
|
finalize_fdt(s);
|
|
}
|
|
|
|
/*
|
|
* Only direct boot kernel is currently supported for KVM VM,
|
|
* so the "-bios" parameter is not supported when KVM is enabled.
|
|
*/
|
|
if (kvm_enabled()) {
|
|
if (machine->firmware) {
|
|
if (strcmp(machine->firmware, "none")) {
|
|
error_report("Machine mode firmware is not supported in "
|
|
"combination with KVM.");
|
|
exit(1);
|
|
}
|
|
} else {
|
|
machine->firmware = g_strdup("none");
|
|
}
|
|
}
|
|
|
|
firmware_end_addr = riscv_find_and_load_firmware(machine, firmware_name,
|
|
&start_addr, NULL);
|
|
|
|
pflash_blk0 = pflash_cfi01_get_blk(s->flash[0]);
|
|
if (pflash_blk0) {
|
|
if (machine->firmware && !strcmp(machine->firmware, "none") &&
|
|
!kvm_enabled()) {
|
|
/*
|
|
* Pflash was supplied but bios is none and not KVM guest,
|
|
* let's overwrite the address we jump to after reset to
|
|
* the base of the flash.
|
|
*/
|
|
start_addr = virt_memmap[VIRT_FLASH].base;
|
|
} else {
|
|
/*
|
|
* Pflash was supplied but either KVM guest or bios is not none.
|
|
* In this case, base of the flash would contain S-mode payload.
|
|
*/
|
|
riscv_setup_firmware_boot(machine);
|
|
kernel_entry = virt_memmap[VIRT_FLASH].base;
|
|
}
|
|
}
|
|
|
|
if (machine->kernel_filename && !kernel_entry) {
|
|
kernel_start_addr = riscv_calc_kernel_start_addr(&s->soc[0],
|
|
firmware_end_addr);
|
|
|
|
kernel_entry = riscv_load_kernel(machine, &s->soc[0],
|
|
kernel_start_addr, true, NULL);
|
|
}
|
|
|
|
fdt_load_addr = riscv_compute_fdt_addr(memmap[VIRT_DRAM].base,
|
|
memmap[VIRT_DRAM].size,
|
|
machine);
|
|
riscv_load_fdt(fdt_load_addr, machine->fdt);
|
|
|
|
/* load the reset vector */
|
|
riscv_setup_rom_reset_vec(machine, &s->soc[0], start_addr,
|
|
virt_memmap[VIRT_MROM].base,
|
|
virt_memmap[VIRT_MROM].size, kernel_entry,
|
|
fdt_load_addr);
|
|
|
|
/*
|
|
* Only direct boot kernel is currently supported for KVM VM,
|
|
* So here setup kernel start address and fdt address.
|
|
* TODO:Support firmware loading and integrate to TCG start
|
|
*/
|
|
if (kvm_enabled()) {
|
|
riscv_setup_direct_kernel(kernel_entry, fdt_load_addr);
|
|
}
|
|
|
|
virt_build_smbios(s);
|
|
|
|
if (virt_is_acpi_enabled(s)) {
|
|
virt_acpi_setup(s);
|
|
}
|
|
}
|
|
|
|
static void virt_machine_init(MachineState *machine)
|
|
{
|
|
const MemMapEntry *memmap = virt_memmap;
|
|
RISCVVirtState *s = RISCV_VIRT_MACHINE(machine);
|
|
MemoryRegion *system_memory = get_system_memory();
|
|
MemoryRegion *mask_rom = g_new(MemoryRegion, 1);
|
|
DeviceState *mmio_irqchip, *virtio_irqchip, *pcie_irqchip;
|
|
int i, base_hartid, hart_count;
|
|
int socket_count = riscv_socket_count(machine);
|
|
|
|
/* Check socket count limit */
|
|
if (VIRT_SOCKETS_MAX < socket_count) {
|
|
error_report("number of sockets/nodes should be less than %d",
|
|
VIRT_SOCKETS_MAX);
|
|
exit(1);
|
|
}
|
|
|
|
if (!virt_aclint_allowed() && s->have_aclint) {
|
|
error_report("'aclint' is only available with TCG acceleration");
|
|
exit(1);
|
|
}
|
|
|
|
/* Initialize sockets */
|
|
mmio_irqchip = virtio_irqchip = pcie_irqchip = NULL;
|
|
for (i = 0; i < socket_count; i++) {
|
|
g_autofree char *soc_name = g_strdup_printf("soc%d", i);
|
|
|
|
if (!riscv_socket_check_hartids(machine, i)) {
|
|
error_report("discontinuous hartids in socket%d", i);
|
|
exit(1);
|
|
}
|
|
|
|
base_hartid = riscv_socket_first_hartid(machine, i);
|
|
if (base_hartid < 0) {
|
|
error_report("can't find hartid base for socket%d", i);
|
|
exit(1);
|
|
}
|
|
|
|
hart_count = riscv_socket_hart_count(machine, i);
|
|
if (hart_count < 0) {
|
|
error_report("can't find hart count for socket%d", i);
|
|
exit(1);
|
|
}
|
|
|
|
object_initialize_child(OBJECT(machine), soc_name, &s->soc[i],
|
|
TYPE_RISCV_HART_ARRAY);
|
|
object_property_set_str(OBJECT(&s->soc[i]), "cpu-type",
|
|
machine->cpu_type, &error_abort);
|
|
object_property_set_int(OBJECT(&s->soc[i]), "hartid-base",
|
|
base_hartid, &error_abort);
|
|
object_property_set_int(OBJECT(&s->soc[i]), "num-harts",
|
|
hart_count, &error_abort);
|
|
sysbus_realize(SYS_BUS_DEVICE(&s->soc[i]), &error_fatal);
|
|
|
|
if (virt_aclint_allowed() && s->have_aclint) {
|
|
if (s->aia_type == VIRT_AIA_TYPE_APLIC_IMSIC) {
|
|
/* Per-socket ACLINT MTIMER */
|
|
riscv_aclint_mtimer_create(memmap[VIRT_CLINT].base +
|
|
i * RISCV_ACLINT_DEFAULT_MTIMER_SIZE,
|
|
RISCV_ACLINT_DEFAULT_MTIMER_SIZE,
|
|
base_hartid, hart_count,
|
|
RISCV_ACLINT_DEFAULT_MTIMECMP,
|
|
RISCV_ACLINT_DEFAULT_MTIME,
|
|
RISCV_ACLINT_DEFAULT_TIMEBASE_FREQ, true);
|
|
} else {
|
|
/* Per-socket ACLINT MSWI, MTIMER, and SSWI */
|
|
riscv_aclint_swi_create(memmap[VIRT_CLINT].base +
|
|
i * memmap[VIRT_CLINT].size,
|
|
base_hartid, hart_count, false);
|
|
riscv_aclint_mtimer_create(memmap[VIRT_CLINT].base +
|
|
i * memmap[VIRT_CLINT].size +
|
|
RISCV_ACLINT_SWI_SIZE,
|
|
RISCV_ACLINT_DEFAULT_MTIMER_SIZE,
|
|
base_hartid, hart_count,
|
|
RISCV_ACLINT_DEFAULT_MTIMECMP,
|
|
RISCV_ACLINT_DEFAULT_MTIME,
|
|
RISCV_ACLINT_DEFAULT_TIMEBASE_FREQ, true);
|
|
riscv_aclint_swi_create(memmap[VIRT_ACLINT_SSWI].base +
|
|
i * memmap[VIRT_ACLINT_SSWI].size,
|
|
base_hartid, hart_count, true);
|
|
}
|
|
} else if (tcg_enabled()) {
|
|
/* Per-socket SiFive CLINT */
|
|
riscv_aclint_swi_create(
|
|
memmap[VIRT_CLINT].base + i * memmap[VIRT_CLINT].size,
|
|
base_hartid, hart_count, false);
|
|
riscv_aclint_mtimer_create(memmap[VIRT_CLINT].base +
|
|
i * memmap[VIRT_CLINT].size + RISCV_ACLINT_SWI_SIZE,
|
|
RISCV_ACLINT_DEFAULT_MTIMER_SIZE, base_hartid, hart_count,
|
|
RISCV_ACLINT_DEFAULT_MTIMECMP, RISCV_ACLINT_DEFAULT_MTIME,
|
|
RISCV_ACLINT_DEFAULT_TIMEBASE_FREQ, true);
|
|
}
|
|
|
|
/* Per-socket interrupt controller */
|
|
if (s->aia_type == VIRT_AIA_TYPE_NONE) {
|
|
s->irqchip[i] = virt_create_plic(memmap, i,
|
|
base_hartid, hart_count);
|
|
} else {
|
|
s->irqchip[i] = virt_create_aia(s->aia_type, s->aia_guests,
|
|
memmap, i, base_hartid,
|
|
hart_count);
|
|
}
|
|
|
|
/* Try to use different IRQCHIP instance based device type */
|
|
if (i == 0) {
|
|
mmio_irqchip = s->irqchip[i];
|
|
virtio_irqchip = s->irqchip[i];
|
|
pcie_irqchip = s->irqchip[i];
|
|
}
|
|
if (i == 1) {
|
|
virtio_irqchip = s->irqchip[i];
|
|
pcie_irqchip = s->irqchip[i];
|
|
}
|
|
if (i == 2) {
|
|
pcie_irqchip = s->irqchip[i];
|
|
}
|
|
}
|
|
|
|
if (kvm_enabled() && virt_use_kvm_aia(s)) {
|
|
kvm_riscv_aia_create(machine, IMSIC_MMIO_GROUP_MIN_SHIFT,
|
|
VIRT_IRQCHIP_NUM_SOURCES, VIRT_IRQCHIP_NUM_MSIS,
|
|
memmap[VIRT_APLIC_S].base,
|
|
memmap[VIRT_IMSIC_S].base,
|
|
s->aia_guests);
|
|
}
|
|
|
|
if (riscv_is_32bit(&s->soc[0])) {
|
|
#if HOST_LONG_BITS == 64
|
|
/* limit RAM size in a 32-bit system */
|
|
if (machine->ram_size > 10 * GiB) {
|
|
machine->ram_size = 10 * GiB;
|
|
error_report("Limiting RAM size to 10 GiB");
|
|
}
|
|
#endif
|
|
virt_high_pcie_memmap.base = VIRT32_HIGH_PCIE_MMIO_BASE;
|
|
virt_high_pcie_memmap.size = VIRT32_HIGH_PCIE_MMIO_SIZE;
|
|
} else {
|
|
virt_high_pcie_memmap.size = VIRT64_HIGH_PCIE_MMIO_SIZE;
|
|
virt_high_pcie_memmap.base = memmap[VIRT_DRAM].base + machine->ram_size;
|
|
virt_high_pcie_memmap.base =
|
|
ROUND_UP(virt_high_pcie_memmap.base, virt_high_pcie_memmap.size);
|
|
}
|
|
|
|
s->memmap = virt_memmap;
|
|
|
|
/* register system main memory (actual RAM) */
|
|
memory_region_add_subregion(system_memory, memmap[VIRT_DRAM].base,
|
|
machine->ram);
|
|
|
|
/* boot rom */
|
|
memory_region_init_rom(mask_rom, NULL, "riscv_virt_board.mrom",
|
|
memmap[VIRT_MROM].size, &error_fatal);
|
|
memory_region_add_subregion(system_memory, memmap[VIRT_MROM].base,
|
|
mask_rom);
|
|
|
|
/*
|
|
* Init fw_cfg. Must be done before riscv_load_fdt, otherwise the
|
|
* device tree cannot be altered and we get FDT_ERR_NOSPACE.
|
|
*/
|
|
s->fw_cfg = create_fw_cfg(machine);
|
|
rom_set_fw(s->fw_cfg);
|
|
|
|
/* SiFive Test MMIO device */
|
|
sifive_test_create(memmap[VIRT_TEST].base);
|
|
|
|
/* VirtIO MMIO devices */
|
|
for (i = 0; i < VIRTIO_COUNT; i++) {
|
|
sysbus_create_simple("virtio-mmio",
|
|
memmap[VIRT_VIRTIO].base + i * memmap[VIRT_VIRTIO].size,
|
|
qdev_get_gpio_in(virtio_irqchip, VIRTIO_IRQ + i));
|
|
}
|
|
|
|
gpex_pcie_init(system_memory, pcie_irqchip, s);
|
|
|
|
create_platform_bus(s, mmio_irqchip);
|
|
|
|
serial_mm_init(system_memory, memmap[VIRT_UART0].base,
|
|
0, qdev_get_gpio_in(mmio_irqchip, UART0_IRQ), 399193,
|
|
serial_hd(0), DEVICE_LITTLE_ENDIAN);
|
|
|
|
sysbus_create_simple("goldfish_rtc", memmap[VIRT_RTC].base,
|
|
qdev_get_gpio_in(mmio_irqchip, RTC_IRQ));
|
|
|
|
for (i = 0; i < ARRAY_SIZE(s->flash); i++) {
|
|
/* Map legacy -drive if=pflash to machine properties */
|
|
pflash_cfi01_legacy_drive(s->flash[i],
|
|
drive_get(IF_PFLASH, 0, i));
|
|
}
|
|
virt_flash_map(s, system_memory);
|
|
|
|
/* load/create device tree */
|
|
if (machine->dtb) {
|
|
machine->fdt = load_device_tree(machine->dtb, &s->fdt_size);
|
|
if (!machine->fdt) {
|
|
error_report("load_device_tree() failed");
|
|
exit(1);
|
|
}
|
|
} else {
|
|
create_fdt(s, memmap);
|
|
}
|
|
|
|
s->machine_done.notify = virt_machine_done;
|
|
qemu_add_machine_init_done_notifier(&s->machine_done);
|
|
}
|
|
|
|
static void virt_machine_instance_init(Object *obj)
|
|
{
|
|
RISCVVirtState *s = RISCV_VIRT_MACHINE(obj);
|
|
|
|
virt_flash_create(s);
|
|
|
|
s->oem_id = g_strndup(ACPI_BUILD_APPNAME6, 6);
|
|
s->oem_table_id = g_strndup(ACPI_BUILD_APPNAME8, 8);
|
|
s->acpi = ON_OFF_AUTO_AUTO;
|
|
}
|
|
|
|
static char *virt_get_aia_guests(Object *obj, Error **errp)
|
|
{
|
|
RISCVVirtState *s = RISCV_VIRT_MACHINE(obj);
|
|
|
|
return g_strdup_printf("%d", s->aia_guests);
|
|
}
|
|
|
|
static void virt_set_aia_guests(Object *obj, const char *val, Error **errp)
|
|
{
|
|
RISCVVirtState *s = RISCV_VIRT_MACHINE(obj);
|
|
|
|
s->aia_guests = atoi(val);
|
|
if (s->aia_guests < 0 || s->aia_guests > VIRT_IRQCHIP_MAX_GUESTS) {
|
|
error_setg(errp, "Invalid number of AIA IMSIC guests");
|
|
error_append_hint(errp, "Valid values be between 0 and %d.\n",
|
|
VIRT_IRQCHIP_MAX_GUESTS);
|
|
}
|
|
}
|
|
|
|
static char *virt_get_aia(Object *obj, Error **errp)
|
|
{
|
|
RISCVVirtState *s = RISCV_VIRT_MACHINE(obj);
|
|
const char *val;
|
|
|
|
switch (s->aia_type) {
|
|
case VIRT_AIA_TYPE_APLIC:
|
|
val = "aplic";
|
|
break;
|
|
case VIRT_AIA_TYPE_APLIC_IMSIC:
|
|
val = "aplic-imsic";
|
|
break;
|
|
default:
|
|
val = "none";
|
|
break;
|
|
};
|
|
|
|
return g_strdup(val);
|
|
}
|
|
|
|
static void virt_set_aia(Object *obj, const char *val, Error **errp)
|
|
{
|
|
RISCVVirtState *s = RISCV_VIRT_MACHINE(obj);
|
|
|
|
if (!strcmp(val, "none")) {
|
|
s->aia_type = VIRT_AIA_TYPE_NONE;
|
|
} else if (!strcmp(val, "aplic")) {
|
|
s->aia_type = VIRT_AIA_TYPE_APLIC;
|
|
} else if (!strcmp(val, "aplic-imsic")) {
|
|
s->aia_type = VIRT_AIA_TYPE_APLIC_IMSIC;
|
|
} else {
|
|
error_setg(errp, "Invalid AIA interrupt controller type");
|
|
error_append_hint(errp, "Valid values are none, aplic, and "
|
|
"aplic-imsic.\n");
|
|
}
|
|
}
|
|
|
|
static bool virt_get_aclint(Object *obj, Error **errp)
|
|
{
|
|
RISCVVirtState *s = RISCV_VIRT_MACHINE(obj);
|
|
|
|
return s->have_aclint;
|
|
}
|
|
|
|
static void virt_set_aclint(Object *obj, bool value, Error **errp)
|
|
{
|
|
RISCVVirtState *s = RISCV_VIRT_MACHINE(obj);
|
|
|
|
s->have_aclint = value;
|
|
}
|
|
|
|
bool virt_is_acpi_enabled(RISCVVirtState *s)
|
|
{
|
|
return s->acpi != ON_OFF_AUTO_OFF;
|
|
}
|
|
|
|
static void virt_get_acpi(Object *obj, Visitor *v, const char *name,
|
|
void *opaque, Error **errp)
|
|
{
|
|
RISCVVirtState *s = RISCV_VIRT_MACHINE(obj);
|
|
OnOffAuto acpi = s->acpi;
|
|
|
|
visit_type_OnOffAuto(v, name, &acpi, errp);
|
|
}
|
|
|
|
static void virt_set_acpi(Object *obj, Visitor *v, const char *name,
|
|
void *opaque, Error **errp)
|
|
{
|
|
RISCVVirtState *s = RISCV_VIRT_MACHINE(obj);
|
|
|
|
visit_type_OnOffAuto(v, name, &s->acpi, errp);
|
|
}
|
|
|
|
static HotplugHandler *virt_machine_get_hotplug_handler(MachineState *machine,
|
|
DeviceState *dev)
|
|
{
|
|
MachineClass *mc = MACHINE_GET_CLASS(machine);
|
|
|
|
if (device_is_dynamic_sysbus(mc, dev) ||
|
|
object_dynamic_cast(OBJECT(dev), TYPE_VIRTIO_IOMMU_PCI)) {
|
|
return HOTPLUG_HANDLER(machine);
|
|
}
|
|
return NULL;
|
|
}
|
|
|
|
static void virt_machine_device_plug_cb(HotplugHandler *hotplug_dev,
|
|
DeviceState *dev, Error **errp)
|
|
{
|
|
RISCVVirtState *s = RISCV_VIRT_MACHINE(hotplug_dev);
|
|
|
|
if (s->platform_bus_dev) {
|
|
MachineClass *mc = MACHINE_GET_CLASS(s);
|
|
|
|
if (device_is_dynamic_sysbus(mc, dev)) {
|
|
platform_bus_link_device(PLATFORM_BUS_DEVICE(s->platform_bus_dev),
|
|
SYS_BUS_DEVICE(dev));
|
|
}
|
|
}
|
|
|
|
if (object_dynamic_cast(OBJECT(dev), TYPE_VIRTIO_IOMMU_PCI)) {
|
|
create_fdt_virtio_iommu(s, pci_get_bdf(PCI_DEVICE(dev)));
|
|
}
|
|
}
|
|
|
|
static void virt_machine_class_init(ObjectClass *oc, void *data)
|
|
{
|
|
MachineClass *mc = MACHINE_CLASS(oc);
|
|
HotplugHandlerClass *hc = HOTPLUG_HANDLER_CLASS(oc);
|
|
|
|
mc->desc = "RISC-V VirtIO board";
|
|
mc->init = virt_machine_init;
|
|
mc->max_cpus = VIRT_CPUS_MAX;
|
|
mc->default_cpu_type = TYPE_RISCV_CPU_BASE;
|
|
mc->block_default_type = IF_VIRTIO;
|
|
mc->no_cdrom = 1;
|
|
mc->pci_allow_0_address = true;
|
|
mc->possible_cpu_arch_ids = riscv_numa_possible_cpu_arch_ids;
|
|
mc->cpu_index_to_instance_props = riscv_numa_cpu_index_to_props;
|
|
mc->get_default_cpu_node_id = riscv_numa_get_default_cpu_node_id;
|
|
mc->numa_mem_supported = true;
|
|
/* platform instead of architectural choice */
|
|
mc->cpu_cluster_has_numa_boundary = true;
|
|
mc->default_ram_id = "riscv_virt_board.ram";
|
|
assert(!mc->get_hotplug_handler);
|
|
mc->get_hotplug_handler = virt_machine_get_hotplug_handler;
|
|
|
|
hc->plug = virt_machine_device_plug_cb;
|
|
|
|
machine_class_allow_dynamic_sysbus_dev(mc, TYPE_RAMFB_DEVICE);
|
|
#ifdef CONFIG_TPM
|
|
machine_class_allow_dynamic_sysbus_dev(mc, TYPE_TPM_TIS_SYSBUS);
|
|
#endif
|
|
|
|
object_class_property_add_bool(oc, "aclint", virt_get_aclint,
|
|
virt_set_aclint);
|
|
object_class_property_set_description(oc, "aclint",
|
|
"(TCG only) Set on/off to "
|
|
"enable/disable emulating "
|
|
"ACLINT devices");
|
|
|
|
object_class_property_add_str(oc, "aia", virt_get_aia,
|
|
virt_set_aia);
|
|
object_class_property_set_description(oc, "aia",
|
|
"Set type of AIA interrupt "
|
|
"controller. Valid values are "
|
|
"none, aplic, and aplic-imsic.");
|
|
|
|
object_class_property_add_str(oc, "aia-guests",
|
|
virt_get_aia_guests,
|
|
virt_set_aia_guests);
|
|
{
|
|
g_autofree char *str =
|
|
g_strdup_printf("Set number of guest MMIO pages for AIA IMSIC. "
|
|
"Valid value should be between 0 and %d.",
|
|
VIRT_IRQCHIP_MAX_GUESTS);
|
|
object_class_property_set_description(oc, "aia-guests", str);
|
|
}
|
|
|
|
object_class_property_add(oc, "acpi", "OnOffAuto",
|
|
virt_get_acpi, virt_set_acpi,
|
|
NULL, NULL);
|
|
object_class_property_set_description(oc, "acpi",
|
|
"Enable ACPI");
|
|
}
|
|
|
|
static const TypeInfo virt_machine_typeinfo = {
|
|
.name = MACHINE_TYPE_NAME("virt"),
|
|
.parent = TYPE_MACHINE,
|
|
.class_init = virt_machine_class_init,
|
|
.instance_init = virt_machine_instance_init,
|
|
.instance_size = sizeof(RISCVVirtState),
|
|
.interfaces = (InterfaceInfo[]) {
|
|
{ TYPE_HOTPLUG_HANDLER },
|
|
{ }
|
|
},
|
|
};
|
|
|
|
static void virt_machine_init_register_types(void)
|
|
{
|
|
type_register_static(&virt_machine_typeinfo);
|
|
}
|
|
|
|
type_init(virt_machine_init_register_types)
|