mirrors/qemu
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
5090121845
qemu/docs/specs/vhost-user.txt
Michael S. Tsirkin c61f09ed85 vhost-user: clarify start and enable 
It seems that we currently have some duplication between
started and enabled states.

The actual reason is that enable is not documented correctly:
what it does is connecting ring to the backend.

This is important for MQ, because a Linux guest expects TX
packets to be completed even if it disables some queues
temporarily.

Cc: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Cc: Victor Kaplansky <victork@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-11-25 13:42:38 +02:00

467 lines
16 KiB
Plaintext
Raw Blame History

Vhost-user Protocol
===================
Copyright (c) 2014 Virtual Open Systems Sarl.
This work is licensed under the terms of the GNU GPL, version 2 or later.
See the COPYING file in the top-level directory.
===================
This protocol is aiming to complement the ioctl interface used to control the
vhost implementation in the Linux kernel. It implements the control plane needed
to establish virtqueue sharing with a user space process on the same host. It
uses communication over a Unix domain socket to share file descriptors in the
ancillary data of the message.
The protocol defines 2 sides of the communication, master and slave. Master is
the application that shares its virtqueues, in our case QEMU. Slave is the
consumer of the virtqueues.
In the current implementation QEMU is the Master, and the Slave is intended to
be a software Ethernet switch running in user space, such as Snabbswitch.
Master and slave can be either a client (i.e. connecting) or server (listening)
in the socket communication.
Message Specification
---------------------
Note that all numbers are in the machine native byte order. A vhost-user message
consists of 3 header fields and a payload:
------------------------------------
| request | flags | size | payload |
------------------------------------
* Request: 32-bit type of the request
* Flags: 32-bit bit field:
- Lower 2 bits are the version (currently 0x01)
- Bit 2 is the reply flag - needs to be sent on each reply from the slave
* Size - 32-bit size of the payload
Depending on the request type, payload can be:
* A single 64-bit integer
-------
| u64 |
-------
u64: a 64-bit unsigned integer
* A vring state description
---------------
| index | num |
---------------
Index: a 32-bit index
Num: a 32-bit number
* A vring address description
--------------------------------------------------------------
| index | flags | size | descriptor | used | available | log |
--------------------------------------------------------------
Index: a 32-bit vring index
Flags: a 32-bit vring flags
Descriptor: a 64-bit user address of the vring descriptor table
Used: a 64-bit user address of the vring used ring
Available: a 64-bit user address of the vring available ring
Log: a 64-bit guest address for logging
* Memory regions description
---------------------------------------------------
| num regions | padding | region0 | ... | region7 |
---------------------------------------------------
Num regions: a 32-bit number of regions
Padding: 32-bit
A region is:
-----------------------------------------------------
| guest address | size | user address | mmap offset |
-----------------------------------------------------
Guest address: a 64-bit guest address of the region
Size: a 64-bit size
User address: a 64-bit user address
mmap offset: 64-bit offset where region starts in the mapped memory
* Log description
---------------------------
| log size | log offset |
---------------------------
log size: size of area used for logging
log offset: offset from start of supplied file descriptor
where logging starts (i.e. where guest address 0 would be logged)
In QEMU the vhost-user message is implemented with the following struct:
typedef struct VhostUserMsg {
VhostUserRequest request;
uint32_t flags;
uint32_t size;
union {
uint64_t u64;
struct vhost_vring_state state;
struct vhost_vring_addr addr;
VhostUserMemory memory;
VhostUserLog log;
};
} QEMU_PACKED VhostUserMsg;
Communication
-------------
The protocol for vhost-user is based on the existing implementation of vhost
for the Linux Kernel. Most messages that can be sent via the Unix domain socket
implementing vhost-user have an equivalent ioctl to the kernel implementation.
The communication consists of master sending message requests and slave sending
message replies. Most of the requests don't require replies. Here is a list of
the ones that do:
* VHOST_GET_FEATURES
* VHOST_GET_PROTOCOL_FEATURES
* VHOST_GET_VRING_BASE
* VHOST_SET_LOG_BASE (if VHOST_USER_PROTOCOL_F_LOG_SHMFD)
There are several messages that the master sends with file descriptors passed
in the ancillary data:
* VHOST_SET_MEM_TABLE
* VHOST_SET_LOG_BASE (if VHOST_USER_PROTOCOL_F_LOG_SHMFD)
* VHOST_SET_LOG_FD
* VHOST_SET_VRING_KICK
* VHOST_SET_VRING_CALL
* VHOST_SET_VRING_ERR
If Master is unable to send the full message or receives a wrong reply it will
close the connection. An optional reconnection mechanism can be implemented.
Any protocol extensions are gated by protocol feature bits,
which allows full backwards compatibility on both master
and slave.
As older slaves don't support negotiating protocol features,
a feature bit was dedicated for this purpose:
#define VHOST_USER_F_PROTOCOL_FEATURES 30
Starting and stopping rings
----------------------
Client must only process each ring when it is started.
Client must only pass data between the ring and the
backend, when the ring is enabled.
If ring is started but disabled, client must process the
ring without talking to the backend.
For example, for a networking device, in the disabled state
client must not supply any new RX packets, but must process
and discard any TX packets.
If VHOST_USER_F_PROTOCOL_FEATURES has not been negotiated, the ring is initialized
in an enabled state.
If VHOST_USER_F_PROTOCOL_FEATURES has been negotiated, the ring is initialized
in a disabled state. Client must not pass data to/from the backend until ring is enabled by
VHOST_USER_SET_VRING_ENABLE with parameter 1, or after it has been disabled by
VHOST_USER_SET_VRING_ENABLE with parameter 0.
Each ring is initialized in a stopped state, client must not process it until
ring is started, or after it has been stopped.
Client must start ring upon receiving a kick (that is, detecting that file
descriptor is readable) on the descriptor specified by
VHOST_USER_SET_VRING_KICK, and stop ring upon receiving
VHOST_USER_GET_VRING_BASE.
While processing the rings (whether they are enabled or not), client must
support changing some configuration aspects on the fly.
Multiple queue support
----------------------
Multiple queue is treated as a protocol extension, hence the slave has to
implement protocol features first. The multiple queues feature is supported
only when the protocol feature VHOST_USER_PROTOCOL_F_MQ (bit 0) is set.
The max number of queues the slave supports can be queried with message
VHOST_USER_GET_PROTOCOL_FEATURES. Master should stop when the number of
requested queues is bigger than that.
As all queues share one connection, the master uses a unique index for each
queue in the sent message to identify a specified queue. One queue pair
is enabled initially. More queues are enabled dynamically, by sending
message VHOST_USER_SET_VRING_ENABLE.
Migration
---------
During live migration, the master may need to track the modifications
the slave makes to the memory mapped regions. The client should mark
the dirty pages in a log. Once it complies to this logging, it may
declare the VHOST_F_LOG_ALL vhost feature.
To start/stop logging of data/used ring writes, server may send messages
VHOST_USER_SET_FEATURES with VHOST_F_LOG_ALL and VHOST_USER_SET_VRING_ADDR with
VHOST_VRING_F_LOG in ring's flags set to 1/0, respectively.
All the modifications to memory pointed by vring "descriptor" should
be marked. Modifications to "used" vring should be marked if
VHOST_VRING_F_LOG is part of ring's flags.
Dirty pages are of size:
#define VHOST_LOG_PAGE 0x1000
The log memory fd is provided in the ancillary data of
VHOST_USER_SET_LOG_BASE message when the slave has
VHOST_USER_PROTOCOL_F_LOG_SHMFD protocol feature.
The size of the log is supplied as part of VhostUserMsg
which should be large enough to cover all known guest
addresses. Log starts at the supplied offset in the
supplied file descriptor.
The log covers from address 0 to the maximum of guest
regions. In pseudo-code, to mark page at "addr" as dirty:
page = addr / VHOST_LOG_PAGE
log[page / 8] |= 1 << page % 8
Where addr is the guest physical address.
Use atomic operations, as the log may be concurrently manipulated.
Note that when logging modifications to the used ring (when VHOST_VRING_F_LOG
is set for this ring), log_guest_addr should be used to calculate the log
offset: the write to first byte of the used ring is logged at this offset from
log start. Also note that this value might be outside the legal guest physical
address range (i.e. does not have to be covered by the VhostUserMemory table),
but the bit offset of the last byte of the ring must fall within
the size supplied by VhostUserLog.
VHOST_USER_SET_LOG_FD is an optional message with an eventfd in
ancillary data, it may be used to inform the master that the log has
been modified.
Once the source has finished migration, rings will be stopped by
the source. No further update must be done before rings are
restarted.
Protocol features
-----------------
#define VHOST_USER_PROTOCOL_F_MQ 0
#define VHOST_USER_PROTOCOL_F_LOG_SHMFD 1
#define VHOST_USER_PROTOCOL_F_RARP 2
Message types
-------------
* VHOST_USER_GET_FEATURES
Id: 1
Equivalent ioctl: VHOST_GET_FEATURES
Master payload: N/A
Slave payload: u64
Get from the underlying vhost implementation the features bitmask.
Feature bit VHOST_USER_F_PROTOCOL_FEATURES signals slave support for
VHOST_USER_GET_PROTOCOL_FEATURES and VHOST_USER_SET_PROTOCOL_FEATURES.
* VHOST_USER_SET_FEATURES
Id: 2
Ioctl: VHOST_SET_FEATURES
Master payload: u64
Enable features in the underlying vhost implementation using a bitmask.
Feature bit VHOST_USER_F_PROTOCOL_FEATURES signals slave support for
VHOST_USER_GET_PROTOCOL_FEATURES and VHOST_USER_SET_PROTOCOL_FEATURES.
* VHOST_USER_GET_PROTOCOL_FEATURES
Id: 15
Equivalent ioctl: VHOST_GET_FEATURES
Master payload: N/A
Slave payload: u64
Get the protocol feature bitmask from the underlying vhost implementation.
Only legal if feature bit VHOST_USER_F_PROTOCOL_FEATURES is present in
VHOST_USER_GET_FEATURES.
Note: slave that reported VHOST_USER_F_PROTOCOL_FEATURES must support
this message even before VHOST_USER_SET_FEATURES was called.
* VHOST_USER_SET_PROTOCOL_FEATURES
Id: 16
Ioctl: VHOST_SET_FEATURES
Master payload: u64
Enable protocol features in the underlying vhost implementation.
Only legal if feature bit VHOST_USER_F_PROTOCOL_FEATURES is present in
VHOST_USER_GET_FEATURES.
Note: slave that reported VHOST_USER_F_PROTOCOL_FEATURES must support
this message even before VHOST_USER_SET_FEATURES was called.
* VHOST_USER_SET_OWNER
Id: 3
Equivalent ioctl: VHOST_SET_OWNER
Master payload: N/A
Issued when a new connection is established. It sets the current Master
as an owner of the session. This can be used on the Slave as a
"session start" flag.
* VHOST_USER_RESET_OWNER
Id: 4
Master payload: N/A
This is no longer used. Used to be sent to request disabling
all rings, but some clients interpreted it to also discard
connection state (this interpretation would lead to bugs).
It is recommended that clients either ignore this message,
or use it to disable all rings.
* VHOST_USER_SET_MEM_TABLE
Id: 5
Equivalent ioctl: VHOST_SET_MEM_TABLE
Master payload: memory regions description
Sets the memory map regions on the slave so it can translate the vring
addresses. In the ancillary data there is an array of file descriptors
for each memory mapped region. The size and ordering of the fds matches
the number and ordering of memory regions.
* VHOST_USER_SET_LOG_BASE
Id: 6
Equivalent ioctl: VHOST_SET_LOG_BASE
Master payload: u64
Slave payload: N/A
Sets logging shared memory space.
When slave has VHOST_USER_PROTOCOL_F_LOG_SHMFD protocol
feature, the log memory fd is provided in the ancillary data of
VHOST_USER_SET_LOG_BASE message, the size and offset of shared
memory area provided in the message.
* VHOST_USER_SET_LOG_FD
Id: 7
Equivalent ioctl: VHOST_SET_LOG_FD
Master payload: N/A
Sets the logging file descriptor, which is passed as ancillary data.
* VHOST_USER_SET_VRING_NUM
Id: 8
Equivalent ioctl: VHOST_SET_VRING_NUM
Master payload: vring state description
Sets the number of vrings for this owner.
* VHOST_USER_SET_VRING_ADDR
Id: 9
Equivalent ioctl: VHOST_SET_VRING_ADDR
Master payload: vring address description
Slave payload: N/A
Sets the addresses of the different aspects of the vring.
* VHOST_USER_SET_VRING_BASE
Id: 10
Equivalent ioctl: VHOST_SET_VRING_BASE
Master payload: vring state description
Sets the base offset in the available vring.
* VHOST_USER_GET_VRING_BASE
Id: 11
Equivalent ioctl: VHOST_USER_GET_VRING_BASE
Master payload: vring state description
Slave payload: vring state description
Get the available vring base offset.
* VHOST_USER_SET_VRING_KICK
Id: 12
Equivalent ioctl: VHOST_SET_VRING_KICK
Master payload: u64
Set the event file descriptor for adding buffers to the vring. It
is passed in the ancillary data.
Bits (0-7) of the payload contain the vring index. Bit 8 is the
invalid FD flag. This flag is set when there is no file descriptor
in the ancillary data. This signals that polling should be used
instead of waiting for a kick.
* VHOST_USER_SET_VRING_CALL
Id: 13
Equivalent ioctl: VHOST_SET_VRING_CALL
Master payload: u64
Set the event file descriptor to signal when buffers are used. It
is passed in the ancillary data.
Bits (0-7) of the payload contain the vring index. Bit 8 is the
invalid FD flag. This flag is set when there is no file descriptor
in the ancillary data. This signals that polling will be used
instead of waiting for the call.
* VHOST_USER_SET_VRING_ERR
Id: 14
Equivalent ioctl: VHOST_SET_VRING_ERR
Master payload: u64
Set the event file descriptor to signal when error occurs. It
is passed in the ancillary data.
Bits (0-7) of the payload contain the vring index. Bit 8 is the
invalid FD flag. This flag is set when there is no file descriptor
in the ancillary data.
* VHOST_USER_GET_QUEUE_NUM
Id: 17
Equivalent ioctl: N/A
Master payload: N/A
Slave payload: u64
Query how many queues the backend supports. This request should be
sent only when VHOST_USER_PROTOCOL_F_MQ is set in quried protocol
features by VHOST_USER_GET_PROTOCOL_FEATURES.
* VHOST_USER_SET_VRING_ENABLE
Id: 18
Equivalent ioctl: N/A
Master payload: vring state description
Signal slave to enable or disable corresponding vring.
This request should be sent only when VHOST_USER_F_PROTOCOL_FEATURES
has been negotiated.
* VHOST_USER_SEND_RARP
Id: 19
Equivalent ioctl: N/A
Master payload: u64
Ask vhost user backend to broadcast a fake RARP to notify the migration
is terminated for guest that does not support GUEST_ANNOUNCE.
Only legal if feature bit VHOST_USER_F_PROTOCOL_FEATURES is present in
VHOST_USER_GET_FEATURES and protocol feature bit VHOST_USER_PROTOCOL_F_RARP
is present in VHOST_USER_GET_PROTOCOL_FEATURES.
The first 6 bytes of the payload contain the mac address of the guest to
allow the vhost user backend to construct and broadcast the fake RARP.
Reference in New Issue View Git Blame Copy Permalink