qemu/hw/versatilepb.c
Paul Brook 02e2da45c4 Add common BusState
Implement and use a common device bus state.  The main side-effect is
that creating a bus and attaching it to a parent device are no longer
separate operations.  For legacy code we allow a NULL parent, but that
should go away eventually.

Also tweak creation code to veriry theat a device in on the right bus.

Signed-off-by: Paul Brook <paul@codesourcery.com>
2009-05-23 00:13:41 +01:00

341 lines
9.7 KiB
C

/*
* ARM Versatile Platform/Application Baseboard System emulation.
*
* Copyright (c) 2005-2007 CodeSourcery.
* Written by Paul Brook
*
* This code is licenced under the GPL.
*/
#include "sysbus.h"
#include "arm-misc.h"
#include "primecell.h"
#include "devices.h"
#include "net.h"
#include "sysemu.h"
#include "pci.h"
#include "boards.h"
/* Primary interrupt controller. */
typedef struct vpb_sic_state
{
SysBusDevice busdev;
uint32_t level;
uint32_t mask;
uint32_t pic_enable;
qemu_irq parent[32];
int irq;
} vpb_sic_state;
static void vpb_sic_update(vpb_sic_state *s)
{
uint32_t flags;
flags = s->level & s->mask;
qemu_set_irq(s->parent[s->irq], flags != 0);
}
static void vpb_sic_update_pic(vpb_sic_state *s)
{
int i;
uint32_t mask;
for (i = 21; i <= 30; i++) {
mask = 1u << i;
if (!(s->pic_enable & mask))
continue;
qemu_set_irq(s->parent[i], (s->level & mask) != 0);
}
}
static void vpb_sic_set_irq(void *opaque, int irq, int level)
{
vpb_sic_state *s = (vpb_sic_state *)opaque;
if (level)
s->level |= 1u << irq;
else
s->level &= ~(1u << irq);
if (s->pic_enable & (1u << irq))
qemu_set_irq(s->parent[irq], level);
vpb_sic_update(s);
}
static uint32_t vpb_sic_read(void *opaque, target_phys_addr_t offset)
{
vpb_sic_state *s = (vpb_sic_state *)opaque;
switch (offset >> 2) {
case 0: /* STATUS */
return s->level & s->mask;
case 1: /* RAWSTAT */
return s->level;
case 2: /* ENABLE */
return s->mask;
case 4: /* SOFTINT */
return s->level & 1;
case 8: /* PICENABLE */
return s->pic_enable;
default:
printf ("vpb_sic_read: Bad register offset 0x%x\n", (int)offset);
return 0;
}
}
static void vpb_sic_write(void *opaque, target_phys_addr_t offset,
uint32_t value)
{
vpb_sic_state *s = (vpb_sic_state *)opaque;
switch (offset >> 2) {
case 2: /* ENSET */
s->mask |= value;
break;
case 3: /* ENCLR */
s->mask &= ~value;
break;
case 4: /* SOFTINTSET */
if (value)
s->mask |= 1;
break;
case 5: /* SOFTINTCLR */
if (value)
s->mask &= ~1u;
break;
case 8: /* PICENSET */
s->pic_enable |= (value & 0x7fe00000);
vpb_sic_update_pic(s);
break;
case 9: /* PICENCLR */
s->pic_enable &= ~value;
vpb_sic_update_pic(s);
break;
default:
printf ("vpb_sic_write: Bad register offset 0x%x\n", (int)offset);
return;
}
vpb_sic_update(s);
}
static CPUReadMemoryFunc *vpb_sic_readfn[] = {
vpb_sic_read,
vpb_sic_read,
vpb_sic_read
};
static CPUWriteMemoryFunc *vpb_sic_writefn[] = {
vpb_sic_write,
vpb_sic_write,
vpb_sic_write
};
static void vpb_sic_init(SysBusDevice *dev)
{
vpb_sic_state *s = FROM_SYSBUS(vpb_sic_state, dev);
int iomemtype;
int i;
qdev_init_irq_sink(&dev->qdev, vpb_sic_set_irq, 32);
for (i = 0; i < 32; i++) {
sysbus_init_irq(dev, &s->parent[i]);
}
s->irq = 31;
iomemtype = cpu_register_io_memory(0, vpb_sic_readfn,
vpb_sic_writefn, s);
sysbus_init_mmio(dev, 0x1000, iomemtype);
/* ??? Save/restore. */
}
/* Board init. */
/* The AB and PB boards both use the same core, just with different
peripherans and expansion busses. For now we emulate a subset of the
PB peripherals and just change the board ID. */
static struct arm_boot_info versatile_binfo;
static void versatile_init(ram_addr_t ram_size,
const char *boot_device,
const char *kernel_filename, const char *kernel_cmdline,
const char *initrd_filename, const char *cpu_model,
int board_id)
{
CPUState *env;
ram_addr_t ram_offset;
qemu_irq *cpu_pic;
qemu_irq pic[32];
qemu_irq sic[32];
DeviceState *dev;
PCIBus *pci_bus;
NICInfo *nd;
int n;
int done_smc = 0;
if (!cpu_model)
cpu_model = "arm926";
env = cpu_init(cpu_model);
if (!env) {
fprintf(stderr, "Unable to find CPU definition\n");
exit(1);
}
ram_offset = qemu_ram_alloc(ram_size);
/* ??? RAM should repeat to fill physical memory space. */
/* SDRAM at address zero. */
cpu_register_physical_memory(0, ram_size, ram_offset | IO_MEM_RAM);
arm_sysctl_init(0x10000000, 0x41007004);
cpu_pic = arm_pic_init_cpu(env);
dev = sysbus_create_varargs("pl190", 0x10140000,
cpu_pic[0], cpu_pic[1], NULL);
for (n = 0; n < 32; n++) {
pic[n] = qdev_get_irq_sink(dev, n);
}
dev = sysbus_create_simple("versatilepb_sic", 0x10003000, NULL);
for (n = 0; n < 32; n++) {
sysbus_connect_irq(sysbus_from_qdev(dev), n, pic[n]);
sic[n] = qdev_get_irq_sink(dev, n);
}
sysbus_create_simple("pl050_keyboard", 0x10006000, sic[3]);
sysbus_create_simple("pl050_mouse", 0x10007000, sic[4]);
dev = sysbus_create_varargs("versatile_pci", 0x40000000,
sic[27], sic[28], sic[29], sic[30], NULL);
pci_bus = (PCIBus *)qdev_get_child_bus(dev, "pci");
/* The Versatile PCI bridge does not provide access to PCI IO space,
so many of the qemu PCI devices are not useable. */
for(n = 0; n < nb_nics; n++) {
nd = &nd_table[n];
if ((!nd->model && !done_smc) || strcmp(nd->model, "smc91c111") == 0) {
smc91c111_init(nd, 0x10010000, sic[25]);
done_smc = 1;
} else {
pci_nic_init(pci_bus, nd, -1, "rtl8139");
}
}
if (usb_enabled) {
usb_ohci_init_pci(pci_bus, 3, -1);
}
n = drive_get_max_bus(IF_SCSI);
while (n >= 0) {
pci_create_simple(pci_bus, -1, "lsi53c895a");
n--;
}
sysbus_create_simple("pl011", 0x101f1000, pic[12]);
sysbus_create_simple("pl011", 0x101f2000, pic[13]);
sysbus_create_simple("pl011", 0x101f3000, pic[14]);
sysbus_create_simple("pl011", 0x10009000, sic[6]);
sysbus_create_simple("pl080", 0x10130000, pic[17]);
sysbus_create_simple("sp804", 0x101e2000, pic[4]);
sysbus_create_simple("sp804", 0x101e3000, pic[5]);
/* The versatile/PB actually has a modified Color LCD controller
that includes hardware cursor support from the PL111. */
sysbus_create_simple("pl110_versatile", 0x10120000, pic[16]);
sysbus_create_varargs("pl181", 0x10005000, sic[22], sic[1], NULL);
sysbus_create_varargs("pl181", 0x1000b000, sic[23], sic[2], NULL);
/* Add PL031 Real Time Clock. */
sysbus_create_simple("pl031", 0x101e8000, pic[10]);
/* Memory map for Versatile/PB: */
/* 0x10000000 System registers. */
/* 0x10001000 PCI controller config registers. */
/* 0x10002000 Serial bus interface. */
/* 0x10003000 Secondary interrupt controller. */
/* 0x10004000 AACI (audio). */
/* 0x10005000 MMCI0. */
/* 0x10006000 KMI0 (keyboard). */
/* 0x10007000 KMI1 (mouse). */
/* 0x10008000 Character LCD Interface. */
/* 0x10009000 UART3. */
/* 0x1000a000 Smart card 1. */
/* 0x1000b000 MMCI1. */
/* 0x10010000 Ethernet. */
/* 0x10020000 USB. */
/* 0x10100000 SSMC. */
/* 0x10110000 MPMC. */
/* 0x10120000 CLCD Controller. */
/* 0x10130000 DMA Controller. */
/* 0x10140000 Vectored interrupt controller. */
/* 0x101d0000 AHB Monitor Interface. */
/* 0x101e0000 System Controller. */
/* 0x101e1000 Watchdog Interface. */
/* 0x101e2000 Timer 0/1. */
/* 0x101e3000 Timer 2/3. */
/* 0x101e4000 GPIO port 0. */
/* 0x101e5000 GPIO port 1. */
/* 0x101e6000 GPIO port 2. */
/* 0x101e7000 GPIO port 3. */
/* 0x101e8000 RTC. */
/* 0x101f0000 Smart card 0. */
/* 0x101f1000 UART0. */
/* 0x101f2000 UART1. */
/* 0x101f3000 UART2. */
/* 0x101f4000 SSPI. */
versatile_binfo.ram_size = ram_size;
versatile_binfo.kernel_filename = kernel_filename;
versatile_binfo.kernel_cmdline = kernel_cmdline;
versatile_binfo.initrd_filename = initrd_filename;
versatile_binfo.board_id = board_id;
arm_load_kernel(env, &versatile_binfo);
}
static void vpb_init(ram_addr_t ram_size,
const char *boot_device,
const char *kernel_filename, const char *kernel_cmdline,
const char *initrd_filename, const char *cpu_model)
{
versatile_init(ram_size,
boot_device,
kernel_filename, kernel_cmdline,
initrd_filename, cpu_model, 0x183);
}
static void vab_init(ram_addr_t ram_size,
const char *boot_device,
const char *kernel_filename, const char *kernel_cmdline,
const char *initrd_filename, const char *cpu_model)
{
versatile_init(ram_size,
boot_device,
kernel_filename, kernel_cmdline,
initrd_filename, cpu_model, 0x25e);
}
static QEMUMachine versatilepb_machine = {
.name = "versatilepb",
.desc = "ARM Versatile/PB (ARM926EJ-S)",
.init = vpb_init,
.use_scsi = 1,
};
static QEMUMachine versatileab_machine = {
.name = "versatileab",
.desc = "ARM Versatile/AB (ARM926EJ-S)",
.init = vab_init,
.use_scsi = 1,
};
static void versatile_machine_init(void)
{
qemu_register_machine(&versatilepb_machine);
qemu_register_machine(&versatileab_machine);
}
machine_init(versatile_machine_init);
static void versatilepb_register_devices(void)
{
sysbus_register_dev("versatilepb_sic", sizeof(vpb_sic_state),
vpb_sic_init);
}
device_init(versatilepb_register_devices)