15dd1ebda4
The ARMv8.4-PMU extension adds: * one new required event, STALL * one new system register PMMIR_EL1 (There are also some more L1-cache related events, but since we don't implement any cache we don't provide these, in the same way we don't provide the base-PMUv3 cache events.) The STALL event "counts every attributable cycle on which no attributable instruction or operation was sent for execution on this PE". QEMU doesn't stall in this sense, so this is another always-reads-zero event. The PMMIR_EL1 register is a read-only register providing implementation-specific information about the PMU; currently it has only one field, SLOTS, which defines behaviour of the STALL_SLOT PMU event. Since QEMU doesn't implement the STALL_SLOT event, we can validly make the register read zero. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20200214175116.9164-15-peter.maydell@linaro.org
12508 lines
444 KiB
C
12508 lines
444 KiB
C
/*
|
|
* ARM generic helpers.
|
|
*
|
|
* This code is licensed under the GNU GPL v2 or later.
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0-or-later
|
|
*/
|
|
|
|
#include "qemu/osdep.h"
|
|
#include "qemu/units.h"
|
|
#include "target/arm/idau.h"
|
|
#include "trace.h"
|
|
#include "cpu.h"
|
|
#include "internals.h"
|
|
#include "exec/gdbstub.h"
|
|
#include "exec/helper-proto.h"
|
|
#include "qemu/host-utils.h"
|
|
#include "qemu/main-loop.h"
|
|
#include "qemu/bitops.h"
|
|
#include "qemu/crc32c.h"
|
|
#include "qemu/qemu-print.h"
|
|
#include "exec/exec-all.h"
|
|
#include <zlib.h> /* For crc32 */
|
|
#include "hw/irq.h"
|
|
#include "hw/semihosting/semihost.h"
|
|
#include "sysemu/cpus.h"
|
|
#include "sysemu/kvm.h"
|
|
#include "sysemu/tcg.h"
|
|
#include "qemu/range.h"
|
|
#include "qapi/qapi-commands-machine-target.h"
|
|
#include "qapi/error.h"
|
|
#include "qemu/guest-random.h"
|
|
#ifdef CONFIG_TCG
|
|
#include "arm_ldst.h"
|
|
#include "exec/cpu_ldst.h"
|
|
#endif
|
|
|
|
#define ARM_CPU_FREQ 1000000000 /* FIXME: 1 GHz, should be configurable */
|
|
|
|
#ifndef CONFIG_USER_ONLY
|
|
|
|
static bool get_phys_addr_lpae(CPUARMState *env, target_ulong address,
|
|
MMUAccessType access_type, ARMMMUIdx mmu_idx,
|
|
hwaddr *phys_ptr, MemTxAttrs *txattrs, int *prot,
|
|
target_ulong *page_size_ptr,
|
|
ARMMMUFaultInfo *fi, ARMCacheAttrs *cacheattrs);
|
|
#endif
|
|
|
|
static void switch_mode(CPUARMState *env, int mode);
|
|
|
|
static int vfp_gdb_get_reg(CPUARMState *env, uint8_t *buf, int reg)
|
|
{
|
|
int nregs;
|
|
|
|
/* VFP data registers are always little-endian. */
|
|
nregs = arm_feature(env, ARM_FEATURE_VFP3) ? 32 : 16;
|
|
if (reg < nregs) {
|
|
stq_le_p(buf, *aa32_vfp_dreg(env, reg));
|
|
return 8;
|
|
}
|
|
if (arm_feature(env, ARM_FEATURE_NEON)) {
|
|
/* Aliases for Q regs. */
|
|
nregs += 16;
|
|
if (reg < nregs) {
|
|
uint64_t *q = aa32_vfp_qreg(env, reg - 32);
|
|
stq_le_p(buf, q[0]);
|
|
stq_le_p(buf + 8, q[1]);
|
|
return 16;
|
|
}
|
|
}
|
|
switch (reg - nregs) {
|
|
case 0: stl_p(buf, env->vfp.xregs[ARM_VFP_FPSID]); return 4;
|
|
case 1: stl_p(buf, vfp_get_fpscr(env)); return 4;
|
|
case 2: stl_p(buf, env->vfp.xregs[ARM_VFP_FPEXC]); return 4;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int vfp_gdb_set_reg(CPUARMState *env, uint8_t *buf, int reg)
|
|
{
|
|
int nregs;
|
|
|
|
nregs = arm_feature(env, ARM_FEATURE_VFP3) ? 32 : 16;
|
|
if (reg < nregs) {
|
|
*aa32_vfp_dreg(env, reg) = ldq_le_p(buf);
|
|
return 8;
|
|
}
|
|
if (arm_feature(env, ARM_FEATURE_NEON)) {
|
|
nregs += 16;
|
|
if (reg < nregs) {
|
|
uint64_t *q = aa32_vfp_qreg(env, reg - 32);
|
|
q[0] = ldq_le_p(buf);
|
|
q[1] = ldq_le_p(buf + 8);
|
|
return 16;
|
|
}
|
|
}
|
|
switch (reg - nregs) {
|
|
case 0: env->vfp.xregs[ARM_VFP_FPSID] = ldl_p(buf); return 4;
|
|
case 1: vfp_set_fpscr(env, ldl_p(buf)); return 4;
|
|
case 2: env->vfp.xregs[ARM_VFP_FPEXC] = ldl_p(buf) & (1 << 30); return 4;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int aarch64_fpu_gdb_get_reg(CPUARMState *env, uint8_t *buf, int reg)
|
|
{
|
|
switch (reg) {
|
|
case 0 ... 31:
|
|
/* 128 bit FP register */
|
|
{
|
|
uint64_t *q = aa64_vfp_qreg(env, reg);
|
|
stq_le_p(buf, q[0]);
|
|
stq_le_p(buf + 8, q[1]);
|
|
return 16;
|
|
}
|
|
case 32:
|
|
/* FPSR */
|
|
stl_p(buf, vfp_get_fpsr(env));
|
|
return 4;
|
|
case 33:
|
|
/* FPCR */
|
|
stl_p(buf, vfp_get_fpcr(env));
|
|
return 4;
|
|
default:
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
static int aarch64_fpu_gdb_set_reg(CPUARMState *env, uint8_t *buf, int reg)
|
|
{
|
|
switch (reg) {
|
|
case 0 ... 31:
|
|
/* 128 bit FP register */
|
|
{
|
|
uint64_t *q = aa64_vfp_qreg(env, reg);
|
|
q[0] = ldq_le_p(buf);
|
|
q[1] = ldq_le_p(buf + 8);
|
|
return 16;
|
|
}
|
|
case 32:
|
|
/* FPSR */
|
|
vfp_set_fpsr(env, ldl_p(buf));
|
|
return 4;
|
|
case 33:
|
|
/* FPCR */
|
|
vfp_set_fpcr(env, ldl_p(buf));
|
|
return 4;
|
|
default:
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
static uint64_t raw_read(CPUARMState *env, const ARMCPRegInfo *ri)
|
|
{
|
|
assert(ri->fieldoffset);
|
|
if (cpreg_field_is_64bit(ri)) {
|
|
return CPREG_FIELD64(env, ri);
|
|
} else {
|
|
return CPREG_FIELD32(env, ri);
|
|
}
|
|
}
|
|
|
|
static void raw_write(CPUARMState *env, const ARMCPRegInfo *ri,
|
|
uint64_t value)
|
|
{
|
|
assert(ri->fieldoffset);
|
|
if (cpreg_field_is_64bit(ri)) {
|
|
CPREG_FIELD64(env, ri) = value;
|
|
} else {
|
|
CPREG_FIELD32(env, ri) = value;
|
|
}
|
|
}
|
|
|
|
static void *raw_ptr(CPUARMState *env, const ARMCPRegInfo *ri)
|
|
{
|
|
return (char *)env + ri->fieldoffset;
|
|
}
|
|
|
|
uint64_t read_raw_cp_reg(CPUARMState *env, const ARMCPRegInfo *ri)
|
|
{
|
|
/* Raw read of a coprocessor register (as needed for migration, etc). */
|
|
if (ri->type & ARM_CP_CONST) {
|
|
return ri->resetvalue;
|
|
} else if (ri->raw_readfn) {
|
|
return ri->raw_readfn(env, ri);
|
|
} else if (ri->readfn) {
|
|
return ri->readfn(env, ri);
|
|
} else {
|
|
return raw_read(env, ri);
|
|
}
|
|
}
|
|
|
|
static void write_raw_cp_reg(CPUARMState *env, const ARMCPRegInfo *ri,
|
|
uint64_t v)
|
|
{
|
|
/* Raw write of a coprocessor register (as needed for migration, etc).
|
|
* Note that constant registers are treated as write-ignored; the
|
|
* caller should check for success by whether a readback gives the
|
|
* value written.
|
|
*/
|
|
if (ri->type & ARM_CP_CONST) {
|
|
return;
|
|
} else if (ri->raw_writefn) {
|
|
ri->raw_writefn(env, ri, v);
|
|
} else if (ri->writefn) {
|
|
ri->writefn(env, ri, v);
|
|
} else {
|
|
raw_write(env, ri, v);
|
|
}
|
|
}
|
|
|
|
static int arm_gdb_get_sysreg(CPUARMState *env, uint8_t *buf, int reg)
|
|
{
|
|
ARMCPU *cpu = env_archcpu(env);
|
|
const ARMCPRegInfo *ri;
|
|
uint32_t key;
|
|
|
|
key = cpu->dyn_xml.cpregs_keys[reg];
|
|
ri = get_arm_cp_reginfo(cpu->cp_regs, key);
|
|
if (ri) {
|
|
if (cpreg_field_is_64bit(ri)) {
|
|
return gdb_get_reg64(buf, (uint64_t)read_raw_cp_reg(env, ri));
|
|
} else {
|
|
return gdb_get_reg32(buf, (uint32_t)read_raw_cp_reg(env, ri));
|
|
}
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int arm_gdb_set_sysreg(CPUARMState *env, uint8_t *buf, int reg)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static bool raw_accessors_invalid(const ARMCPRegInfo *ri)
|
|
{
|
|
/* Return true if the regdef would cause an assertion if you called
|
|
* read_raw_cp_reg() or write_raw_cp_reg() on it (ie if it is a
|
|
* program bug for it not to have the NO_RAW flag).
|
|
* NB that returning false here doesn't necessarily mean that calling
|
|
* read/write_raw_cp_reg() is safe, because we can't distinguish "has
|
|
* read/write access functions which are safe for raw use" from "has
|
|
* read/write access functions which have side effects but has forgotten
|
|
* to provide raw access functions".
|
|
* The tests here line up with the conditions in read/write_raw_cp_reg()
|
|
* and assertions in raw_read()/raw_write().
|
|
*/
|
|
if ((ri->type & ARM_CP_CONST) ||
|
|
ri->fieldoffset ||
|
|
((ri->raw_writefn || ri->writefn) && (ri->raw_readfn || ri->readfn))) {
|
|
return false;
|
|
}
|
|
return true;
|
|
}
|
|
|
|
bool write_cpustate_to_list(ARMCPU *cpu, bool kvm_sync)
|
|
{
|
|
/* Write the coprocessor state from cpu->env to the (index,value) list. */
|
|
int i;
|
|
bool ok = true;
|
|
|
|
for (i = 0; i < cpu->cpreg_array_len; i++) {
|
|
uint32_t regidx = kvm_to_cpreg_id(cpu->cpreg_indexes[i]);
|
|
const ARMCPRegInfo *ri;
|
|
uint64_t newval;
|
|
|
|
ri = get_arm_cp_reginfo(cpu->cp_regs, regidx);
|
|
if (!ri) {
|
|
ok = false;
|
|
continue;
|
|
}
|
|
if (ri->type & ARM_CP_NO_RAW) {
|
|
continue;
|
|
}
|
|
|
|
newval = read_raw_cp_reg(&cpu->env, ri);
|
|
if (kvm_sync) {
|
|
/*
|
|
* Only sync if the previous list->cpustate sync succeeded.
|
|
* Rather than tracking the success/failure state for every
|
|
* item in the list, we just recheck "does the raw write we must
|
|
* have made in write_list_to_cpustate() read back OK" here.
|
|
*/
|
|
uint64_t oldval = cpu->cpreg_values[i];
|
|
|
|
if (oldval == newval) {
|
|
continue;
|
|
}
|
|
|
|
write_raw_cp_reg(&cpu->env, ri, oldval);
|
|
if (read_raw_cp_reg(&cpu->env, ri) != oldval) {
|
|
continue;
|
|
}
|
|
|
|
write_raw_cp_reg(&cpu->env, ri, newval);
|
|
}
|
|
cpu->cpreg_values[i] = newval;
|
|
}
|
|
return ok;
|
|
}
|
|
|
|
bool write_list_to_cpustate(ARMCPU *cpu)
|
|
{
|
|
int i;
|
|
bool ok = true;
|
|
|
|
for (i = 0; i < cpu->cpreg_array_len; i++) {
|
|
uint32_t regidx = kvm_to_cpreg_id(cpu->cpreg_indexes[i]);
|
|
uint64_t v = cpu->cpreg_values[i];
|
|
const ARMCPRegInfo *ri;
|
|
|
|
ri = get_arm_cp_reginfo(cpu->cp_regs, regidx);
|
|
if (!ri) {
|
|
ok = false;
|
|
continue;
|
|
}
|
|
if (ri->type & ARM_CP_NO_RAW) {
|
|
continue;
|
|
}
|
|
/* Write value and confirm it reads back as written
|
|
* (to catch read-only registers and partially read-only
|
|
* registers where the incoming migration value doesn't match)
|
|
*/
|
|
write_raw_cp_reg(&cpu->env, ri, v);
|
|
if (read_raw_cp_reg(&cpu->env, ri) != v) {
|
|
ok = false;
|
|
}
|
|
}
|
|
return ok;
|
|
}
|
|
|
|
static void add_cpreg_to_list(gpointer key, gpointer opaque)
|
|
{
|
|
ARMCPU *cpu = opaque;
|
|
uint64_t regidx;
|
|
const ARMCPRegInfo *ri;
|
|
|
|
regidx = *(uint32_t *)key;
|
|
ri = get_arm_cp_reginfo(cpu->cp_regs, regidx);
|
|
|
|
if (!(ri->type & (ARM_CP_NO_RAW|ARM_CP_ALIAS))) {
|
|
cpu->cpreg_indexes[cpu->cpreg_array_len] = cpreg_to_kvm_id(regidx);
|
|
/* The value array need not be initialized at this point */
|
|
cpu->cpreg_array_len++;
|
|
}
|
|
}
|
|
|
|
static void count_cpreg(gpointer key, gpointer opaque)
|
|
{
|
|
ARMCPU *cpu = opaque;
|
|
uint64_t regidx;
|
|
const ARMCPRegInfo *ri;
|
|
|
|
regidx = *(uint32_t *)key;
|
|
ri = get_arm_cp_reginfo(cpu->cp_regs, regidx);
|
|
|
|
if (!(ri->type & (ARM_CP_NO_RAW|ARM_CP_ALIAS))) {
|
|
cpu->cpreg_array_len++;
|
|
}
|
|
}
|
|
|
|
static gint cpreg_key_compare(gconstpointer a, gconstpointer b)
|
|
{
|
|
uint64_t aidx = cpreg_to_kvm_id(*(uint32_t *)a);
|
|
uint64_t bidx = cpreg_to_kvm_id(*(uint32_t *)b);
|
|
|
|
if (aidx > bidx) {
|
|
return 1;
|
|
}
|
|
if (aidx < bidx) {
|
|
return -1;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
void init_cpreg_list(ARMCPU *cpu)
|
|
{
|
|
/* Initialise the cpreg_tuples[] array based on the cp_regs hash.
|
|
* Note that we require cpreg_tuples[] to be sorted by key ID.
|
|
*/
|
|
GList *keys;
|
|
int arraylen;
|
|
|
|
keys = g_hash_table_get_keys(cpu->cp_regs);
|
|
keys = g_list_sort(keys, cpreg_key_compare);
|
|
|
|
cpu->cpreg_array_len = 0;
|
|
|
|
g_list_foreach(keys, count_cpreg, cpu);
|
|
|
|
arraylen = cpu->cpreg_array_len;
|
|
cpu->cpreg_indexes = g_new(uint64_t, arraylen);
|
|
cpu->cpreg_values = g_new(uint64_t, arraylen);
|
|
cpu->cpreg_vmstate_indexes = g_new(uint64_t, arraylen);
|
|
cpu->cpreg_vmstate_values = g_new(uint64_t, arraylen);
|
|
cpu->cpreg_vmstate_array_len = cpu->cpreg_array_len;
|
|
cpu->cpreg_array_len = 0;
|
|
|
|
g_list_foreach(keys, add_cpreg_to_list, cpu);
|
|
|
|
assert(cpu->cpreg_array_len == arraylen);
|
|
|
|
g_list_free(keys);
|
|
}
|
|
|
|
/*
|
|
* Some registers are not accessible if EL3.NS=0 and EL3 is using AArch32 but
|
|
* they are accessible when EL3 is using AArch64 regardless of EL3.NS.
|
|
*
|
|
* access_el3_aa32ns: Used to check AArch32 register views.
|
|
* access_el3_aa32ns_aa64any: Used to check both AArch32/64 register views.
|
|
*/
|
|
static CPAccessResult access_el3_aa32ns(CPUARMState *env,
|
|
const ARMCPRegInfo *ri,
|
|
bool isread)
|
|
{
|
|
bool secure = arm_is_secure_below_el3(env);
|
|
|
|
assert(!arm_el_is_aa64(env, 3));
|
|
if (secure) {
|
|
return CP_ACCESS_TRAP_UNCATEGORIZED;
|
|
}
|
|
return CP_ACCESS_OK;
|
|
}
|
|
|
|
static CPAccessResult access_el3_aa32ns_aa64any(CPUARMState *env,
|
|
const ARMCPRegInfo *ri,
|
|
bool isread)
|
|
{
|
|
if (!arm_el_is_aa64(env, 3)) {
|
|
return access_el3_aa32ns(env, ri, isread);
|
|
}
|
|
return CP_ACCESS_OK;
|
|
}
|
|
|
|
/* Some secure-only AArch32 registers trap to EL3 if used from
|
|
* Secure EL1 (but are just ordinary UNDEF in other non-EL3 contexts).
|
|
* Note that an access from Secure EL1 can only happen if EL3 is AArch64.
|
|
* We assume that the .access field is set to PL1_RW.
|
|
*/
|
|
static CPAccessResult access_trap_aa32s_el1(CPUARMState *env,
|
|
const ARMCPRegInfo *ri,
|
|
bool isread)
|
|
{
|
|
if (arm_current_el(env) == 3) {
|
|
return CP_ACCESS_OK;
|
|
}
|
|
if (arm_is_secure_below_el3(env)) {
|
|
return CP_ACCESS_TRAP_EL3;
|
|
}
|
|
/* This will be EL1 NS and EL2 NS, which just UNDEF */
|
|
return CP_ACCESS_TRAP_UNCATEGORIZED;
|
|
}
|
|
|
|
/* Check for traps to "powerdown debug" registers, which are controlled
|
|
* by MDCR.TDOSA
|
|
*/
|
|
static CPAccessResult access_tdosa(CPUARMState *env, const ARMCPRegInfo *ri,
|
|
bool isread)
|
|
{
|
|
int el = arm_current_el(env);
|
|
bool mdcr_el2_tdosa = (env->cp15.mdcr_el2 & MDCR_TDOSA) ||
|
|
(env->cp15.mdcr_el2 & MDCR_TDE) ||
|
|
(arm_hcr_el2_eff(env) & HCR_TGE);
|
|
|
|
if (el < 2 && mdcr_el2_tdosa && !arm_is_secure_below_el3(env)) {
|
|
return CP_ACCESS_TRAP_EL2;
|
|
}
|
|
if (el < 3 && (env->cp15.mdcr_el3 & MDCR_TDOSA)) {
|
|
return CP_ACCESS_TRAP_EL3;
|
|
}
|
|
return CP_ACCESS_OK;
|
|
}
|
|
|
|
/* Check for traps to "debug ROM" registers, which are controlled
|
|
* by MDCR_EL2.TDRA for EL2 but by the more general MDCR_EL3.TDA for EL3.
|
|
*/
|
|
static CPAccessResult access_tdra(CPUARMState *env, const ARMCPRegInfo *ri,
|
|
bool isread)
|
|
{
|
|
int el = arm_current_el(env);
|
|
bool mdcr_el2_tdra = (env->cp15.mdcr_el2 & MDCR_TDRA) ||
|
|
(env->cp15.mdcr_el2 & MDCR_TDE) ||
|
|
(arm_hcr_el2_eff(env) & HCR_TGE);
|
|
|
|
if (el < 2 && mdcr_el2_tdra && !arm_is_secure_below_el3(env)) {
|
|
return CP_ACCESS_TRAP_EL2;
|
|
}
|
|
if (el < 3 && (env->cp15.mdcr_el3 & MDCR_TDA)) {
|
|
return CP_ACCESS_TRAP_EL3;
|
|
}
|
|
return CP_ACCESS_OK;
|
|
}
|
|
|
|
/* Check for traps to general debug registers, which are controlled
|
|
* by MDCR_EL2.TDA for EL2 and MDCR_EL3.TDA for EL3.
|
|
*/
|
|
static CPAccessResult access_tda(CPUARMState *env, const ARMCPRegInfo *ri,
|
|
bool isread)
|
|
{
|
|
int el = arm_current_el(env);
|
|
bool mdcr_el2_tda = (env->cp15.mdcr_el2 & MDCR_TDA) ||
|
|
(env->cp15.mdcr_el2 & MDCR_TDE) ||
|
|
(arm_hcr_el2_eff(env) & HCR_TGE);
|
|
|
|
if (el < 2 && mdcr_el2_tda && !arm_is_secure_below_el3(env)) {
|
|
return CP_ACCESS_TRAP_EL2;
|
|
}
|
|
if (el < 3 && (env->cp15.mdcr_el3 & MDCR_TDA)) {
|
|
return CP_ACCESS_TRAP_EL3;
|
|
}
|
|
return CP_ACCESS_OK;
|
|
}
|
|
|
|
/* Check for traps to performance monitor registers, which are controlled
|
|
* by MDCR_EL2.TPM for EL2 and MDCR_EL3.TPM for EL3.
|
|
*/
|
|
static CPAccessResult access_tpm(CPUARMState *env, const ARMCPRegInfo *ri,
|
|
bool isread)
|
|
{
|
|
int el = arm_current_el(env);
|
|
|
|
if (el < 2 && (env->cp15.mdcr_el2 & MDCR_TPM)
|
|
&& !arm_is_secure_below_el3(env)) {
|
|
return CP_ACCESS_TRAP_EL2;
|
|
}
|
|
if (el < 3 && (env->cp15.mdcr_el3 & MDCR_TPM)) {
|
|
return CP_ACCESS_TRAP_EL3;
|
|
}
|
|
return CP_ACCESS_OK;
|
|
}
|
|
|
|
static void dacr_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t value)
|
|
{
|
|
ARMCPU *cpu = env_archcpu(env);
|
|
|
|
raw_write(env, ri, value);
|
|
tlb_flush(CPU(cpu)); /* Flush TLB as domain not tracked in TLB */
|
|
}
|
|
|
|
static void fcse_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t value)
|
|
{
|
|
ARMCPU *cpu = env_archcpu(env);
|
|
|
|
if (raw_read(env, ri) != value) {
|
|
/* Unlike real hardware the qemu TLB uses virtual addresses,
|
|
* not modified virtual addresses, so this causes a TLB flush.
|
|
*/
|
|
tlb_flush(CPU(cpu));
|
|
raw_write(env, ri, value);
|
|
}
|
|
}
|
|
|
|
static void contextidr_write(CPUARMState *env, const ARMCPRegInfo *ri,
|
|
uint64_t value)
|
|
{
|
|
ARMCPU *cpu = env_archcpu(env);
|
|
|
|
if (raw_read(env, ri) != value && !arm_feature(env, ARM_FEATURE_PMSA)
|
|
&& !extended_addresses_enabled(env)) {
|
|
/* For VMSA (when not using the LPAE long descriptor page table
|
|
* format) this register includes the ASID, so do a TLB flush.
|
|
* For PMSA it is purely a process ID and no action is needed.
|
|
*/
|
|
tlb_flush(CPU(cpu));
|
|
}
|
|
raw_write(env, ri, value);
|
|
}
|
|
|
|
/* IS variants of TLB operations must affect all cores */
|
|
static void tlbiall_is_write(CPUARMState *env, const ARMCPRegInfo *ri,
|
|
uint64_t value)
|
|
{
|
|
CPUState *cs = env_cpu(env);
|
|
|
|
tlb_flush_all_cpus_synced(cs);
|
|
}
|
|
|
|
static void tlbiasid_is_write(CPUARMState *env, const ARMCPRegInfo *ri,
|
|
uint64_t value)
|
|
{
|
|
CPUState *cs = env_cpu(env);
|
|
|
|
tlb_flush_all_cpus_synced(cs);
|
|
}
|
|
|
|
static void tlbimva_is_write(CPUARMState *env, const ARMCPRegInfo *ri,
|
|
uint64_t value)
|
|
{
|
|
CPUState *cs = env_cpu(env);
|
|
|
|
tlb_flush_page_all_cpus_synced(cs, value & TARGET_PAGE_MASK);
|
|
}
|
|
|
|
static void tlbimvaa_is_write(CPUARMState *env, const ARMCPRegInfo *ri,
|
|
uint64_t value)
|
|
{
|
|
CPUState *cs = env_cpu(env);
|
|
|
|
tlb_flush_page_all_cpus_synced(cs, value & TARGET_PAGE_MASK);
|
|
}
|
|
|
|
/*
|
|
* Non-IS variants of TLB operations are upgraded to
|
|
* IS versions if we are at NS EL1 and HCR_EL2.FB is set to
|
|
* force broadcast of these operations.
|
|
*/
|
|
static bool tlb_force_broadcast(CPUARMState *env)
|
|
{
|
|
return (env->cp15.hcr_el2 & HCR_FB) &&
|
|
arm_current_el(env) == 1 && arm_is_secure_below_el3(env);
|
|
}
|
|
|
|
static void tlbiall_write(CPUARMState *env, const ARMCPRegInfo *ri,
|
|
uint64_t value)
|
|
{
|
|
/* Invalidate all (TLBIALL) */
|
|
CPUState *cs = env_cpu(env);
|
|
|
|
if (tlb_force_broadcast(env)) {
|
|
tlb_flush_all_cpus_synced(cs);
|
|
} else {
|
|
tlb_flush(cs);
|
|
}
|
|
}
|
|
|
|
static void tlbimva_write(CPUARMState *env, const ARMCPRegInfo *ri,
|
|
uint64_t value)
|
|
{
|
|
/* Invalidate single TLB entry by MVA and ASID (TLBIMVA) */
|
|
CPUState *cs = env_cpu(env);
|
|
|
|
value &= TARGET_PAGE_MASK;
|
|
if (tlb_force_broadcast(env)) {
|
|
tlb_flush_page_all_cpus_synced(cs, value);
|
|
} else {
|
|
tlb_flush_page(cs, value);
|
|
}
|
|
}
|
|
|
|
static void tlbiasid_write(CPUARMState *env, const ARMCPRegInfo *ri,
|
|
uint64_t value)
|
|
{
|
|
/* Invalidate by ASID (TLBIASID) */
|
|
CPUState *cs = env_cpu(env);
|
|
|
|
if (tlb_force_broadcast(env)) {
|
|
tlb_flush_all_cpus_synced(cs);
|
|
} else {
|
|
tlb_flush(cs);
|
|
}
|
|
}
|
|
|
|
static void tlbimvaa_write(CPUARMState *env, const ARMCPRegInfo *ri,
|
|
uint64_t value)
|
|
{
|
|
/* Invalidate single entry by MVA, all ASIDs (TLBIMVAA) */
|
|
CPUState *cs = env_cpu(env);
|
|
|
|
value &= TARGET_PAGE_MASK;
|
|
if (tlb_force_broadcast(env)) {
|
|
tlb_flush_page_all_cpus_synced(cs, value);
|
|
} else {
|
|
tlb_flush_page(cs, value);
|
|
}
|
|
}
|
|
|
|
static void tlbiall_nsnh_write(CPUARMState *env, const ARMCPRegInfo *ri,
|
|
uint64_t value)
|
|
{
|
|
CPUState *cs = env_cpu(env);
|
|
|
|
tlb_flush_by_mmuidx(cs,
|
|
ARMMMUIdxBit_E10_1 |
|
|
ARMMMUIdxBit_E10_1_PAN |
|
|
ARMMMUIdxBit_E10_0 |
|
|
ARMMMUIdxBit_Stage2);
|
|
}
|
|
|
|
static void tlbiall_nsnh_is_write(CPUARMState *env, const ARMCPRegInfo *ri,
|
|
uint64_t value)
|
|
{
|
|
CPUState *cs = env_cpu(env);
|
|
|
|
tlb_flush_by_mmuidx_all_cpus_synced(cs,
|
|
ARMMMUIdxBit_E10_1 |
|
|
ARMMMUIdxBit_E10_1_PAN |
|
|
ARMMMUIdxBit_E10_0 |
|
|
ARMMMUIdxBit_Stage2);
|
|
}
|
|
|
|
static void tlbiipas2_write(CPUARMState *env, const ARMCPRegInfo *ri,
|
|
uint64_t value)
|
|
{
|
|
/* Invalidate by IPA. This has to invalidate any structures that
|
|
* contain only stage 2 translation information, but does not need
|
|
* to apply to structures that contain combined stage 1 and stage 2
|
|
* translation information.
|
|
* This must NOP if EL2 isn't implemented or SCR_EL3.NS is zero.
|
|
*/
|
|
CPUState *cs = env_cpu(env);
|
|
uint64_t pageaddr;
|
|
|
|
if (!arm_feature(env, ARM_FEATURE_EL2) || !(env->cp15.scr_el3 & SCR_NS)) {
|
|
return;
|
|
}
|
|
|
|
pageaddr = sextract64(value << 12, 0, 40);
|
|
|
|
tlb_flush_page_by_mmuidx(cs, pageaddr, ARMMMUIdxBit_Stage2);
|
|
}
|
|
|
|
static void tlbiipas2_is_write(CPUARMState *env, const ARMCPRegInfo *ri,
|
|
uint64_t value)
|
|
{
|
|
CPUState *cs = env_cpu(env);
|
|
uint64_t pageaddr;
|
|
|
|
if (!arm_feature(env, ARM_FEATURE_EL2) || !(env->cp15.scr_el3 & SCR_NS)) {
|
|
return;
|
|
}
|
|
|
|
pageaddr = sextract64(value << 12, 0, 40);
|
|
|
|
tlb_flush_page_by_mmuidx_all_cpus_synced(cs, pageaddr,
|
|
ARMMMUIdxBit_Stage2);
|
|
}
|
|
|
|
static void tlbiall_hyp_write(CPUARMState *env, const ARMCPRegInfo *ri,
|
|
uint64_t value)
|
|
{
|
|
CPUState *cs = env_cpu(env);
|
|
|
|
tlb_flush_by_mmuidx(cs, ARMMMUIdxBit_E2);
|
|
}
|
|
|
|
static void tlbiall_hyp_is_write(CPUARMState *env, const ARMCPRegInfo *ri,
|
|
uint64_t value)
|
|
{
|
|
CPUState *cs = env_cpu(env);
|
|
|
|
tlb_flush_by_mmuidx_all_cpus_synced(cs, ARMMMUIdxBit_E2);
|
|
}
|
|
|
|
static void tlbimva_hyp_write(CPUARMState *env, const ARMCPRegInfo *ri,
|
|
uint64_t value)
|
|
{
|
|
CPUState *cs = env_cpu(env);
|
|
uint64_t pageaddr = value & ~MAKE_64BIT_MASK(0, 12);
|
|
|
|
tlb_flush_page_by_mmuidx(cs, pageaddr, ARMMMUIdxBit_E2);
|
|
}
|
|
|
|
static void tlbimva_hyp_is_write(CPUARMState *env, const ARMCPRegInfo *ri,
|
|
uint64_t value)
|
|
{
|
|
CPUState *cs = env_cpu(env);
|
|
uint64_t pageaddr = value & ~MAKE_64BIT_MASK(0, 12);
|
|
|
|
tlb_flush_page_by_mmuidx_all_cpus_synced(cs, pageaddr,
|
|
ARMMMUIdxBit_E2);
|
|
}
|
|
|
|
static const ARMCPRegInfo cp_reginfo[] = {
|
|
/* Define the secure and non-secure FCSE identifier CP registers
|
|
* separately because there is no secure bank in V8 (no _EL3). This allows
|
|
* the secure register to be properly reset and migrated. There is also no
|
|
* v8 EL1 version of the register so the non-secure instance stands alone.
|
|
*/
|
|
{ .name = "FCSEIDR",
|
|
.cp = 15, .opc1 = 0, .crn = 13, .crm = 0, .opc2 = 0,
|
|
.access = PL1_RW, .secure = ARM_CP_SECSTATE_NS,
|
|
.fieldoffset = offsetof(CPUARMState, cp15.fcseidr_ns),
|
|
.resetvalue = 0, .writefn = fcse_write, .raw_writefn = raw_write, },
|
|
{ .name = "FCSEIDR_S",
|
|
.cp = 15, .opc1 = 0, .crn = 13, .crm = 0, .opc2 = 0,
|
|
.access = PL1_RW, .secure = ARM_CP_SECSTATE_S,
|
|
.fieldoffset = offsetof(CPUARMState, cp15.fcseidr_s),
|
|
.resetvalue = 0, .writefn = fcse_write, .raw_writefn = raw_write, },
|
|
/* Define the secure and non-secure context identifier CP registers
|
|
* separately because there is no secure bank in V8 (no _EL3). This allows
|
|
* the secure register to be properly reset and migrated. In the
|
|
* non-secure case, the 32-bit register will have reset and migration
|
|
* disabled during registration as it is handled by the 64-bit instance.
|
|
*/
|
|
{ .name = "CONTEXTIDR_EL1", .state = ARM_CP_STATE_BOTH,
|
|
.opc0 = 3, .opc1 = 0, .crn = 13, .crm = 0, .opc2 = 1,
|
|
.access = PL1_RW, .secure = ARM_CP_SECSTATE_NS,
|
|
.fieldoffset = offsetof(CPUARMState, cp15.contextidr_el[1]),
|
|
.resetvalue = 0, .writefn = contextidr_write, .raw_writefn = raw_write, },
|
|
{ .name = "CONTEXTIDR_S", .state = ARM_CP_STATE_AA32,
|
|
.cp = 15, .opc1 = 0, .crn = 13, .crm = 0, .opc2 = 1,
|
|
.access = PL1_RW, .secure = ARM_CP_SECSTATE_S,
|
|
.fieldoffset = offsetof(CPUARMState, cp15.contextidr_s),
|
|
.resetvalue = 0, .writefn = contextidr_write, .raw_writefn = raw_write, },
|
|
REGINFO_SENTINEL
|
|
};
|
|
|
|
static const ARMCPRegInfo not_v8_cp_reginfo[] = {
|
|
/* NB: Some of these registers exist in v8 but with more precise
|
|
* definitions that don't use CP_ANY wildcards (mostly in v8_cp_reginfo[]).
|
|
*/
|
|
/* MMU Domain access control / MPU write buffer control */
|
|
{ .name = "DACR",
|
|
.cp = 15, .opc1 = CP_ANY, .crn = 3, .crm = CP_ANY, .opc2 = CP_ANY,
|
|
.access = PL1_RW, .resetvalue = 0,
|
|
.writefn = dacr_write, .raw_writefn = raw_write,
|
|
.bank_fieldoffsets = { offsetoflow32(CPUARMState, cp15.dacr_s),
|
|
offsetoflow32(CPUARMState, cp15.dacr_ns) } },
|
|
/* ARMv7 allocates a range of implementation defined TLB LOCKDOWN regs.
|
|
* For v6 and v5, these mappings are overly broad.
|
|
*/
|
|
{ .name = "TLB_LOCKDOWN", .cp = 15, .crn = 10, .crm = 0,
|
|
.opc1 = CP_ANY, .opc2 = CP_ANY, .access = PL1_RW, .type = ARM_CP_NOP },
|
|
{ .name = "TLB_LOCKDOWN", .cp = 15, .crn = 10, .crm = 1,
|
|
.opc1 = CP_ANY, .opc2 = CP_ANY, .access = PL1_RW, .type = ARM_CP_NOP },
|
|
{ .name = "TLB_LOCKDOWN", .cp = 15, .crn = 10, .crm = 4,
|
|
.opc1 = CP_ANY, .opc2 = CP_ANY, .access = PL1_RW, .type = ARM_CP_NOP },
|
|
{ .name = "TLB_LOCKDOWN", .cp = 15, .crn = 10, .crm = 8,
|
|
.opc1 = CP_ANY, .opc2 = CP_ANY, .access = PL1_RW, .type = ARM_CP_NOP },
|
|
/* Cache maintenance ops; some of this space may be overridden later. */
|
|
{ .name = "CACHEMAINT", .cp = 15, .crn = 7, .crm = CP_ANY,
|
|
.opc1 = 0, .opc2 = CP_ANY, .access = PL1_W,
|
|
.type = ARM_CP_NOP | ARM_CP_OVERRIDE },
|
|
REGINFO_SENTINEL
|
|
};
|
|
|
|
static const ARMCPRegInfo not_v6_cp_reginfo[] = {
|
|
/* Not all pre-v6 cores implemented this WFI, so this is slightly
|
|
* over-broad.
|
|
*/
|
|
{ .name = "WFI_v5", .cp = 15, .crn = 7, .crm = 8, .opc1 = 0, .opc2 = 2,
|
|
.access = PL1_W, .type = ARM_CP_WFI },
|
|
REGINFO_SENTINEL
|
|
};
|
|
|
|
static const ARMCPRegInfo not_v7_cp_reginfo[] = {
|
|
/* Standard v6 WFI (also used in some pre-v6 cores); not in v7 (which
|
|
* is UNPREDICTABLE; we choose to NOP as most implementations do).
|
|
*/
|
|
{ .name = "WFI_v6", .cp = 15, .crn = 7, .crm = 0, .opc1 = 0, .opc2 = 4,
|
|
.access = PL1_W, .type = ARM_CP_WFI },
|
|
/* L1 cache lockdown. Not architectural in v6 and earlier but in practice
|
|
* implemented in 926, 946, 1026, 1136, 1176 and 11MPCore. StrongARM and
|
|
* OMAPCP will override this space.
|
|
*/
|
|
{ .name = "DLOCKDOWN", .cp = 15, .crn = 9, .crm = 0, .opc1 = 0, .opc2 = 0,
|
|
.access = PL1_RW, .fieldoffset = offsetof(CPUARMState, cp15.c9_data),
|
|
.resetvalue = 0 },
|
|
{ .name = "ILOCKDOWN", .cp = 15, .crn = 9, .crm = 0, .opc1 = 0, .opc2 = 1,
|
|
.access = PL1_RW, .fieldoffset = offsetof(CPUARMState, cp15.c9_insn),
|
|
.resetvalue = 0 },
|
|
/* v6 doesn't have the cache ID registers but Linux reads them anyway */
|
|
{ .name = "DUMMY", .cp = 15, .crn = 0, .crm = 0, .opc1 = 1, .opc2 = CP_ANY,
|
|
.access = PL1_R, .type = ARM_CP_CONST | ARM_CP_NO_RAW,
|
|
.resetvalue = 0 },
|
|
/* We don't implement pre-v7 debug but most CPUs had at least a DBGDIDR;
|
|
* implementing it as RAZ means the "debug architecture version" bits
|
|
* will read as a reserved value, which should cause Linux to not try
|
|
* to use the debug hardware.
|
|
*/
|
|
{ .name = "DBGDIDR", .cp = 14, .crn = 0, .crm = 0, .opc1 = 0, .opc2 = 0,
|
|
.access = PL0_R, .type = ARM_CP_CONST, .resetvalue = 0 },
|
|
/* MMU TLB control. Note that the wildcarding means we cover not just
|
|
* the unified TLB ops but also the dside/iside/inner-shareable variants.
|
|
*/
|
|
{ .name = "TLBIALL", .cp = 15, .crn = 8, .crm = CP_ANY,
|
|
.opc1 = CP_ANY, .opc2 = 0, .access = PL1_W, .writefn = tlbiall_write,
|
|
.type = ARM_CP_NO_RAW },
|
|
{ .name = "TLBIMVA", .cp = 15, .crn = 8, .crm = CP_ANY,
|
|
.opc1 = CP_ANY, .opc2 = 1, .access = PL1_W, .writefn = tlbimva_write,
|
|
.type = ARM_CP_NO_RAW },
|
|
{ .name = "TLBIASID", .cp = 15, .crn = 8, .crm = CP_ANY,
|
|
.opc1 = CP_ANY, .opc2 = 2, .access = PL1_W, .writefn = tlbiasid_write,
|
|
.type = ARM_CP_NO_RAW },
|
|
{ .name = "TLBIMVAA", .cp = 15, .crn = 8, .crm = CP_ANY,
|
|
.opc1 = CP_ANY, .opc2 = 3, .access = PL1_W, .writefn = tlbimvaa_write,
|
|
.type = ARM_CP_NO_RAW },
|
|
{ .name = "PRRR", .cp = 15, .crn = 10, .crm = 2,
|
|
.opc1 = 0, .opc2 = 0, .access = PL1_RW, .type = ARM_CP_NOP },
|
|
{ .name = "NMRR", .cp = 15, .crn = 10, .crm = 2,
|
|
.opc1 = 0, .opc2 = 1, .access = PL1_RW, .type = ARM_CP_NOP },
|
|
REGINFO_SENTINEL
|
|
};
|
|
|
|
static void cpacr_write(CPUARMState *env, const ARMCPRegInfo *ri,
|
|
uint64_t value)
|
|
{
|
|
uint32_t mask = 0;
|
|
|
|
/* In ARMv8 most bits of CPACR_EL1 are RES0. */
|
|
if (!arm_feature(env, ARM_FEATURE_V8)) {
|
|
/* ARMv7 defines bits for unimplemented coprocessors as RAZ/WI.
|
|
* ASEDIS [31] and D32DIS [30] are both UNK/SBZP without VFP.
|
|
* TRCDIS [28] is RAZ/WI since we do not implement a trace macrocell.
|
|
*/
|
|
if (arm_feature(env, ARM_FEATURE_VFP)) {
|
|
/* VFP coprocessor: cp10 & cp11 [23:20] */
|
|
mask |= (1 << 31) | (1 << 30) | (0xf << 20);
|
|
|
|
if (!arm_feature(env, ARM_FEATURE_NEON)) {
|
|
/* ASEDIS [31] bit is RAO/WI */
|
|
value |= (1 << 31);
|
|
}
|
|
|
|
/* VFPv3 and upwards with NEON implement 32 double precision
|
|
* registers (D0-D31).
|
|
*/
|
|
if (!arm_feature(env, ARM_FEATURE_NEON) ||
|
|
!arm_feature(env, ARM_FEATURE_VFP3)) {
|
|
/* D32DIS [30] is RAO/WI if D16-31 are not implemented. */
|
|
value |= (1 << 30);
|
|
}
|
|
}
|
|
value &= mask;
|
|
}
|
|
|
|
/*
|
|
* For A-profile AArch32 EL3 (but not M-profile secure mode), if NSACR.CP10
|
|
* is 0 then CPACR.{CP11,CP10} ignore writes and read as 0b00.
|
|
*/
|
|
if (arm_feature(env, ARM_FEATURE_EL3) && !arm_el_is_aa64(env, 3) &&
|
|
!arm_is_secure(env) && !extract32(env->cp15.nsacr, 10, 1)) {
|
|
value &= ~(0xf << 20);
|
|
value |= env->cp15.cpacr_el1 & (0xf << 20);
|
|
}
|
|
|
|
env->cp15.cpacr_el1 = value;
|
|
}
|
|
|
|
static uint64_t cpacr_read(CPUARMState *env, const ARMCPRegInfo *ri)
|
|
{
|
|
/*
|
|
* For A-profile AArch32 EL3 (but not M-profile secure mode), if NSACR.CP10
|
|
* is 0 then CPACR.{CP11,CP10} ignore writes and read as 0b00.
|
|
*/
|
|
uint64_t value = env->cp15.cpacr_el1;
|
|
|
|
if (arm_feature(env, ARM_FEATURE_EL3) && !arm_el_is_aa64(env, 3) &&
|
|
!arm_is_secure(env) && !extract32(env->cp15.nsacr, 10, 1)) {
|
|
value &= ~(0xf << 20);
|
|
}
|
|
return value;
|
|
}
|
|
|
|
|
|
static void cpacr_reset(CPUARMState *env, const ARMCPRegInfo *ri)
|
|
{
|
|
/* Call cpacr_write() so that we reset with the correct RAO bits set
|
|
* for our CPU features.
|
|
*/
|
|
cpacr_write(env, ri, 0);
|
|
}
|
|
|
|
static CPAccessResult cpacr_access(CPUARMState *env, const ARMCPRegInfo *ri,
|
|
bool isread)
|
|
{
|
|
if (arm_feature(env, ARM_FEATURE_V8)) {
|
|
/* Check if CPACR accesses are to be trapped to EL2 */
|
|
if (arm_current_el(env) == 1 &&
|
|
(env->cp15.cptr_el[2] & CPTR_TCPAC) && !arm_is_secure(env)) {
|
|
return CP_ACCESS_TRAP_EL2;
|
|
/* Check if CPACR accesses are to be trapped to EL3 */
|
|
} else if (arm_current_el(env) < 3 &&
|
|
(env->cp15.cptr_el[3] & CPTR_TCPAC)) {
|
|
return CP_ACCESS_TRAP_EL3;
|
|
}
|
|
}
|
|
|
|
return CP_ACCESS_OK;
|
|
}
|
|
|
|
static CPAccessResult cptr_access(CPUARMState *env, const ARMCPRegInfo *ri,
|
|
bool isread)
|
|
{
|
|
/* Check if CPTR accesses are set to trap to EL3 */
|
|
if (arm_current_el(env) == 2 && (env->cp15.cptr_el[3] & CPTR_TCPAC)) {
|
|
return CP_ACCESS_TRAP_EL3;
|
|
}
|
|
|
|
return CP_ACCESS_OK;
|
|
}
|
|
|
|
static const ARMCPRegInfo v6_cp_reginfo[] = {
|
|
/* prefetch by MVA in v6, NOP in v7 */
|
|
{ .name = "MVA_prefetch",
|
|
.cp = 15, .crn = 7, .crm = 13, .opc1 = 0, .opc2 = 1,
|
|
.access = PL1_W, .type = ARM_CP_NOP },
|
|
/* We need to break the TB after ISB to execute self-modifying code
|
|
* correctly and also to take any pending interrupts immediately.
|
|
* So use arm_cp_write_ignore() function instead of ARM_CP_NOP flag.
|
|
*/
|
|
{ .name = "ISB", .cp = 15, .crn = 7, .crm = 5, .opc1 = 0, .opc2 = 4,
|
|
.access = PL0_W, .type = ARM_CP_NO_RAW, .writefn = arm_cp_write_ignore },
|
|
{ .name = "DSB", .cp = 15, .crn = 7, .crm = 10, .opc1 = 0, .opc2 = 4,
|
|
.access = PL0_W, .type = ARM_CP_NOP },
|
|
{ .name = "DMB", .cp = 15, .crn = 7, .crm = 10, .opc1 = 0, .opc2 = 5,
|
|
.access = PL0_W, .type = ARM_CP_NOP },
|
|
{ .name = "IFAR", .cp = 15, .crn = 6, .crm = 0, .opc1 = 0, .opc2 = 2,
|
|
.access = PL1_RW,
|
|
.bank_fieldoffsets = { offsetof(CPUARMState, cp15.ifar_s),
|
|
offsetof(CPUARMState, cp15.ifar_ns) },
|
|
.resetvalue = 0, },
|
|
/* Watchpoint Fault Address Register : should actually only be present
|
|
* for 1136, 1176, 11MPCore.
|
|
*/
|
|
{ .name = "WFAR", .cp = 15, .crn = 6, .crm = 0, .opc1 = 0, .opc2 = 1,
|
|
.access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0, },
|
|
{ .name = "CPACR", .state = ARM_CP_STATE_BOTH, .opc0 = 3,
|
|
.crn = 1, .crm = 0, .opc1 = 0, .opc2 = 2, .accessfn = cpacr_access,
|
|
.access = PL1_RW, .fieldoffset = offsetof(CPUARMState, cp15.cpacr_el1),
|
|
.resetfn = cpacr_reset, .writefn = cpacr_write, .readfn = cpacr_read },
|
|
REGINFO_SENTINEL
|
|
};
|
|
|
|
/* Definitions for the PMU registers */
|
|
#define PMCRN_MASK 0xf800
|
|
#define PMCRN_SHIFT 11
|
|
#define PMCRLC 0x40
|
|
#define PMCRDP 0x10
|
|
#define PMCRD 0x8
|
|
#define PMCRC 0x4
|
|
#define PMCRP 0x2
|
|
#define PMCRE 0x1
|
|
|
|
#define PMXEVTYPER_P 0x80000000
|
|
#define PMXEVTYPER_U 0x40000000
|
|
#define PMXEVTYPER_NSK 0x20000000
|
|
#define PMXEVTYPER_NSU 0x10000000
|
|
#define PMXEVTYPER_NSH 0x08000000
|
|
#define PMXEVTYPER_M 0x04000000
|
|
#define PMXEVTYPER_MT 0x02000000
|
|
#define PMXEVTYPER_EVTCOUNT 0x0000ffff
|
|
#define PMXEVTYPER_MASK (PMXEVTYPER_P | PMXEVTYPER_U | PMXEVTYPER_NSK | \
|
|
PMXEVTYPER_NSU | PMXEVTYPER_NSH | \
|
|
PMXEVTYPER_M | PMXEVTYPER_MT | \
|
|
PMXEVTYPER_EVTCOUNT)
|
|
|
|
#define PMCCFILTR 0xf8000000
|
|
#define PMCCFILTR_M PMXEVTYPER_M
|
|
#define PMCCFILTR_EL0 (PMCCFILTR | PMCCFILTR_M)
|
|
|
|
static inline uint32_t pmu_num_counters(CPUARMState *env)
|
|
{
|
|
return (env->cp15.c9_pmcr & PMCRN_MASK) >> PMCRN_SHIFT;
|
|
}
|
|
|
|
/* Bits allowed to be set/cleared for PMCNTEN* and PMINTEN* */
|
|
static inline uint64_t pmu_counter_mask(CPUARMState *env)
|
|
{
|
|
return (1 << 31) | ((1 << pmu_num_counters(env)) - 1);
|
|
}
|
|
|
|
typedef struct pm_event {
|
|
uint16_t number; /* PMEVTYPER.evtCount is 16 bits wide */
|
|
/* If the event is supported on this CPU (used to generate PMCEID[01]) */
|
|
bool (*supported)(CPUARMState *);
|
|
/*
|
|
* Retrieve the current count of the underlying event. The programmed
|
|
* counters hold a difference from the return value from this function
|
|
*/
|
|
uint64_t (*get_count)(CPUARMState *);
|
|
/*
|
|
* Return how many nanoseconds it will take (at a minimum) for count events
|
|
* to occur. A negative value indicates the counter will never overflow, or
|
|
* that the counter has otherwise arranged for the overflow bit to be set
|
|
* and the PMU interrupt to be raised on overflow.
|
|
*/
|
|
int64_t (*ns_per_count)(uint64_t);
|
|
} pm_event;
|
|
|
|
static bool event_always_supported(CPUARMState *env)
|
|
{
|
|
return true;
|
|
}
|
|
|
|
static uint64_t swinc_get_count(CPUARMState *env)
|
|
{
|
|
/*
|
|
* SW_INCR events are written directly to the pmevcntr's by writes to
|
|
* PMSWINC, so there is no underlying count maintained by the PMU itself
|
|
*/
|
|
return 0;
|
|
}
|
|
|
|
static int64_t swinc_ns_per(uint64_t ignored)
|
|
{
|
|
return -1;
|
|
}
|
|
|
|
/*
|
|
* Return the underlying cycle count for the PMU cycle counters. If we're in
|
|
* usermode, simply return 0.
|
|
*/
|
|
static uint64_t cycles_get_count(CPUARMState *env)
|
|
{
|
|
#ifndef CONFIG_USER_ONLY
|
|
return muldiv64(qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL),
|
|
ARM_CPU_FREQ, NANOSECONDS_PER_SECOND);
|
|
#else
|
|
return cpu_get_host_ticks();
|
|
#endif
|
|
}
|
|
|
|
#ifndef CONFIG_USER_ONLY
|
|
static int64_t cycles_ns_per(uint64_t cycles)
|
|
{
|
|
return (ARM_CPU_FREQ / NANOSECONDS_PER_SECOND) * cycles;
|
|
}
|
|
|
|
static bool instructions_supported(CPUARMState *env)
|
|
{
|
|
return use_icount == 1 /* Precise instruction counting */;
|
|
}
|
|
|
|
static uint64_t instructions_get_count(CPUARMState *env)
|
|
{
|
|
return (uint64_t)cpu_get_icount_raw();
|
|
}
|
|
|
|
static int64_t instructions_ns_per(uint64_t icount)
|
|
{
|
|
return cpu_icount_to_ns((int64_t)icount);
|
|
}
|
|
#endif
|
|
|
|
static bool pmu_8_1_events_supported(CPUARMState *env)
|
|
{
|
|
/* For events which are supported in any v8.1 PMU */
|
|
return cpu_isar_feature(any_pmu_8_1, env_archcpu(env));
|
|
}
|
|
|
|
static bool pmu_8_4_events_supported(CPUARMState *env)
|
|
{
|
|
/* For events which are supported in any v8.1 PMU */
|
|
return cpu_isar_feature(any_pmu_8_4, env_archcpu(env));
|
|
}
|
|
|
|
static uint64_t zero_event_get_count(CPUARMState *env)
|
|
{
|
|
/* For events which on QEMU never fire, so their count is always zero */
|
|
return 0;
|
|
}
|
|
|
|
static int64_t zero_event_ns_per(uint64_t cycles)
|
|
{
|
|
/* An event which never fires can never overflow */
|
|
return -1;
|
|
}
|
|
|
|
static const pm_event pm_events[] = {
|
|
{ .number = 0x000, /* SW_INCR */
|
|
.supported = event_always_supported,
|
|
.get_count = swinc_get_count,
|
|
.ns_per_count = swinc_ns_per,
|
|
},
|
|
#ifndef CONFIG_USER_ONLY
|
|
{ .number = 0x008, /* INST_RETIRED, Instruction architecturally executed */
|
|
.supported = instructions_supported,
|
|
.get_count = instructions_get_count,
|
|
.ns_per_count = instructions_ns_per,
|
|
},
|
|
{ .number = 0x011, /* CPU_CYCLES, Cycle */
|
|
.supported = event_always_supported,
|
|
.get_count = cycles_get_count,
|
|
.ns_per_count = cycles_ns_per,
|
|
},
|
|
#endif
|
|
{ .number = 0x023, /* STALL_FRONTEND */
|
|
.supported = pmu_8_1_events_supported,
|
|
.get_count = zero_event_get_count,
|
|
.ns_per_count = zero_event_ns_per,
|
|
},
|
|
{ .number = 0x024, /* STALL_BACKEND */
|
|
.supported = pmu_8_1_events_supported,
|
|
.get_count = zero_event_get_count,
|
|
.ns_per_count = zero_event_ns_per,
|
|
},
|
|
{ .number = 0x03c, /* STALL */
|
|
.supported = pmu_8_4_events_supported,
|
|
.get_count = zero_event_get_count,
|
|
.ns_per_count = zero_event_ns_per,
|
|
},
|
|
};
|
|
|
|
/*
|
|
* Note: Before increasing MAX_EVENT_ID beyond 0x3f into the 0x40xx range of
|
|
* events (i.e. the statistical profiling extension), this implementation
|
|
* should first be updated to something sparse instead of the current
|
|
* supported_event_map[] array.
|
|
*/
|
|
#define MAX_EVENT_ID 0x3c
|
|
#define UNSUPPORTED_EVENT UINT16_MAX
|
|
static uint16_t supported_event_map[MAX_EVENT_ID + 1];
|
|
|
|
/*
|
|
* Called upon CPU initialization to initialize PMCEID[01]_EL0 and build a map
|
|
* of ARM event numbers to indices in our pm_events array.
|
|
*
|
|
* Note: Events in the 0x40XX range are not currently supported.
|
|
*/
|
|
void pmu_init(ARMCPU *cpu)
|
|
{
|
|
unsigned int i;
|
|
|
|
/*
|
|
* Empty supported_event_map and cpu->pmceid[01] before adding supported
|
|
* events to them
|
|
*/
|
|
for (i = 0; i < ARRAY_SIZE(supported_event_map); i++) {
|
|
supported_event_map[i] = UNSUPPORTED_EVENT;
|
|
}
|
|
cpu->pmceid0 = 0;
|
|
cpu->pmceid1 = 0;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(pm_events); i++) {
|
|
const pm_event *cnt = &pm_events[i];
|
|
assert(cnt->number <= MAX_EVENT_ID);
|
|
/* We do not currently support events in the 0x40xx range */
|
|
assert(cnt->number <= 0x3f);
|
|
|
|
if (cnt->supported(&cpu->env)) {
|
|
supported_event_map[cnt->number] = i;
|
|
uint64_t event_mask = 1ULL << (cnt->number & 0x1f);
|
|
if (cnt->number & 0x20) {
|
|
cpu->pmceid1 |= event_mask;
|
|
} else {
|
|
cpu->pmceid0 |= event_mask;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Check at runtime whether a PMU event is supported for the current machine
|
|
*/
|
|
static bool event_supported(uint16_t number)
|
|
{
|
|
if (number > MAX_EVENT_ID) {
|
|
return false;
|
|
}
|
|
return supported_event_map[number] != UNSUPPORTED_EVENT;
|
|
}
|
|
|
|
static CPAccessResult pmreg_access(CPUARMState *env, const ARMCPRegInfo *ri,
|
|
bool isread)
|
|
{
|
|
/* Performance monitor registers user accessibility is controlled
|
|
* by PMUSERENR. MDCR_EL2.TPM and MDCR_EL3.TPM allow configurable
|
|
* trapping to EL2 or EL3 for other accesses.
|
|
*/
|
|
int el = arm_current_el(env);
|
|
|
|
if (el == 0 && !(env->cp15.c9_pmuserenr & 1)) {
|
|
return CP_ACCESS_TRAP;
|
|
}
|
|
if (el < 2 && (env->cp15.mdcr_el2 & MDCR_TPM)
|
|
&& !arm_is_secure_below_el3(env)) {
|
|
return CP_ACCESS_TRAP_EL2;
|
|
}
|
|
if (el < 3 && (env->cp15.mdcr_el3 & MDCR_TPM)) {
|
|
return CP_ACCESS_TRAP_EL3;
|
|
}
|
|
|
|
return CP_ACCESS_OK;
|
|
}
|
|
|
|
static CPAccessResult pmreg_access_xevcntr(CPUARMState *env,
|
|
const ARMCPRegInfo *ri,
|
|
bool isread)
|
|
{
|
|
/* ER: event counter read trap control */
|
|
if (arm_feature(env, ARM_FEATURE_V8)
|
|
&& arm_current_el(env) == 0
|
|
&& (env->cp15.c9_pmuserenr & (1 << 3)) != 0
|
|
&& isread) {
|
|
return CP_ACCESS_OK;
|
|
}
|
|
|
|
return pmreg_access(env, ri, isread);
|
|
}
|
|
|
|
static CPAccessResult pmreg_access_swinc(CPUARMState *env,
|
|
const ARMCPRegInfo *ri,
|
|
bool isread)
|
|
{
|
|
/* SW: software increment write trap control */
|
|
if (arm_feature(env, ARM_FEATURE_V8)
|
|
&& arm_current_el(env) == 0
|
|
&& (env->cp15.c9_pmuserenr & (1 << 1)) != 0
|
|
&& !isread) {
|
|
return CP_ACCESS_OK;
|
|
}
|
|
|
|
return pmreg_access(env, ri, isread);
|
|
}
|
|
|
|
static CPAccessResult pmreg_access_selr(CPUARMState *env,
|
|
const ARMCPRegInfo *ri,
|
|
bool isread)
|
|
{
|
|
/* ER: event counter read trap control */
|
|
if (arm_feature(env, ARM_FEATURE_V8)
|
|
&& arm_current_el(env) == 0
|
|
&& (env->cp15.c9_pmuserenr & (1 << 3)) != 0) {
|
|
return CP_ACCESS_OK;
|
|
}
|
|
|
|
return pmreg_access(env, ri, isread);
|
|
}
|
|
|
|
static CPAccessResult pmreg_access_ccntr(CPUARMState *env,
|
|
const ARMCPRegInfo *ri,
|
|
bool isread)
|
|
{
|
|
/* CR: cycle counter read trap control */
|
|
if (arm_feature(env, ARM_FEATURE_V8)
|
|
&& arm_current_el(env) == 0
|
|
&& (env->cp15.c9_pmuserenr & (1 << 2)) != 0
|
|
&& isread) {
|
|
return CP_ACCESS_OK;
|
|
}
|
|
|
|
return pmreg_access(env, ri, isread);
|
|
}
|
|
|
|
/* Returns true if the counter (pass 31 for PMCCNTR) should count events using
|
|
* the current EL, security state, and register configuration.
|
|
*/
|
|
static bool pmu_counter_enabled(CPUARMState *env, uint8_t counter)
|
|
{
|
|
uint64_t filter;
|
|
bool e, p, u, nsk, nsu, nsh, m;
|
|
bool enabled, prohibited, filtered;
|
|
bool secure = arm_is_secure(env);
|
|
int el = arm_current_el(env);
|
|
uint8_t hpmn = env->cp15.mdcr_el2 & MDCR_HPMN;
|
|
|
|
if (!arm_feature(env, ARM_FEATURE_PMU)) {
|
|
return false;
|
|
}
|
|
|
|
if (!arm_feature(env, ARM_FEATURE_EL2) ||
|
|
(counter < hpmn || counter == 31)) {
|
|
e = env->cp15.c9_pmcr & PMCRE;
|
|
} else {
|
|
e = env->cp15.mdcr_el2 & MDCR_HPME;
|
|
}
|
|
enabled = e && (env->cp15.c9_pmcnten & (1 << counter));
|
|
|
|
if (!secure) {
|
|
if (el == 2 && (counter < hpmn || counter == 31)) {
|
|
prohibited = env->cp15.mdcr_el2 & MDCR_HPMD;
|
|
} else {
|
|
prohibited = false;
|
|
}
|
|
} else {
|
|
prohibited = arm_feature(env, ARM_FEATURE_EL3) &&
|
|
(env->cp15.mdcr_el3 & MDCR_SPME);
|
|
}
|
|
|
|
if (prohibited && counter == 31) {
|
|
prohibited = env->cp15.c9_pmcr & PMCRDP;
|
|
}
|
|
|
|
if (counter == 31) {
|
|
filter = env->cp15.pmccfiltr_el0;
|
|
} else {
|
|
filter = env->cp15.c14_pmevtyper[counter];
|
|
}
|
|
|
|
p = filter & PMXEVTYPER_P;
|
|
u = filter & PMXEVTYPER_U;
|
|
nsk = arm_feature(env, ARM_FEATURE_EL3) && (filter & PMXEVTYPER_NSK);
|
|
nsu = arm_feature(env, ARM_FEATURE_EL3) && (filter & PMXEVTYPER_NSU);
|
|
nsh = arm_feature(env, ARM_FEATURE_EL2) && (filter & PMXEVTYPER_NSH);
|
|
m = arm_el_is_aa64(env, 1) &&
|
|
arm_feature(env, ARM_FEATURE_EL3) && (filter & PMXEVTYPER_M);
|
|
|
|
if (el == 0) {
|
|
filtered = secure ? u : u != nsu;
|
|
} else if (el == 1) {
|
|
filtered = secure ? p : p != nsk;
|
|
} else if (el == 2) {
|
|
filtered = !nsh;
|
|
} else { /* EL3 */
|
|
filtered = m != p;
|
|
}
|
|
|
|
if (counter != 31) {
|
|
/*
|
|
* If not checking PMCCNTR, ensure the counter is setup to an event we
|
|
* support
|
|
*/
|
|
uint16_t event = filter & PMXEVTYPER_EVTCOUNT;
|
|
if (!event_supported(event)) {
|
|
return false;
|
|
}
|
|
}
|
|
|
|
return enabled && !prohibited && !filtered;
|
|
}
|
|
|
|
static void pmu_update_irq(CPUARMState *env)
|
|
{
|
|
ARMCPU *cpu = env_archcpu(env);
|
|
qemu_set_irq(cpu->pmu_interrupt, (env->cp15.c9_pmcr & PMCRE) &&
|
|
(env->cp15.c9_pminten & env->cp15.c9_pmovsr));
|
|
}
|
|
|
|
/*
|
|
* Ensure c15_ccnt is the guest-visible count so that operations such as
|
|
* enabling/disabling the counter or filtering, modifying the count itself,
|
|
* etc. can be done logically. This is essentially a no-op if the counter is
|
|
* not enabled at the time of the call.
|
|
*/
|
|
static void pmccntr_op_start(CPUARMState *env)
|
|
{
|
|
uint64_t cycles = cycles_get_count(env);
|
|
|
|
if (pmu_counter_enabled(env, 31)) {
|
|
uint64_t eff_cycles = cycles;
|
|
if (env->cp15.c9_pmcr & PMCRD) {
|
|
/* Increment once every 64 processor clock cycles */
|
|
eff_cycles /= 64;
|
|
}
|
|
|
|
uint64_t new_pmccntr = eff_cycles - env->cp15.c15_ccnt_delta;
|
|
|
|
uint64_t overflow_mask = env->cp15.c9_pmcr & PMCRLC ? \
|
|
1ull << 63 : 1ull << 31;
|
|
if (env->cp15.c15_ccnt & ~new_pmccntr & overflow_mask) {
|
|
env->cp15.c9_pmovsr |= (1 << 31);
|
|
pmu_update_irq(env);
|
|
}
|
|
|
|
env->cp15.c15_ccnt = new_pmccntr;
|
|
}
|
|
env->cp15.c15_ccnt_delta = cycles;
|
|
}
|
|
|
|
/*
|
|
* If PMCCNTR is enabled, recalculate the delta between the clock and the
|
|
* guest-visible count. A call to pmccntr_op_finish should follow every call to
|
|
* pmccntr_op_start.
|
|
*/
|
|
static void pmccntr_op_finish(CPUARMState *env)
|
|
{
|
|
if (pmu_counter_enabled(env, 31)) {
|
|
#ifndef CONFIG_USER_ONLY
|
|
/* Calculate when the counter will next overflow */
|
|
uint64_t remaining_cycles = -env->cp15.c15_ccnt;
|
|
if (!(env->cp15.c9_pmcr & PMCRLC)) {
|
|
remaining_cycles = (uint32_t)remaining_cycles;
|
|
}
|
|
int64_t overflow_in = cycles_ns_per(remaining_cycles);
|
|
|
|
if (overflow_in > 0) {
|
|
int64_t overflow_at = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) +
|
|
overflow_in;
|
|
ARMCPU *cpu = env_archcpu(env);
|
|
timer_mod_anticipate_ns(cpu->pmu_timer, overflow_at);
|
|
}
|
|
#endif
|
|
|
|
uint64_t prev_cycles = env->cp15.c15_ccnt_delta;
|
|
if (env->cp15.c9_pmcr & PMCRD) {
|
|
/* Increment once every 64 processor clock cycles */
|
|
prev_cycles /= 64;
|
|
}
|
|
env->cp15.c15_ccnt_delta = prev_cycles - env->cp15.c15_ccnt;
|
|
}
|
|
}
|
|
|
|
static void pmevcntr_op_start(CPUARMState *env, uint8_t counter)
|
|
{
|
|
|
|
uint16_t event = env->cp15.c14_pmevtyper[counter] & PMXEVTYPER_EVTCOUNT;
|
|
uint64_t count = 0;
|
|
if (event_supported(event)) {
|
|
uint16_t event_idx = supported_event_map[event];
|
|
count = pm_events[event_idx].get_count(env);
|
|
}
|
|
|
|
if (pmu_counter_enabled(env, counter)) {
|
|
uint32_t new_pmevcntr = count - env->cp15.c14_pmevcntr_delta[counter];
|
|
|
|
if (env->cp15.c14_pmevcntr[counter] & ~new_pmevcntr & INT32_MIN) {
|
|
env->cp15.c9_pmovsr |= (1 << counter);
|
|
pmu_update_irq(env);
|
|
}
|
|
env->cp15.c14_pmevcntr[counter] = new_pmevcntr;
|
|
}
|
|
env->cp15.c14_pmevcntr_delta[counter] = count;
|
|
}
|
|
|
|
static void pmevcntr_op_finish(CPUARMState *env, uint8_t counter)
|
|
{
|
|
if (pmu_counter_enabled(env, counter)) {
|
|
#ifndef CONFIG_USER_ONLY
|
|
uint16_t event = env->cp15.c14_pmevtyper[counter] & PMXEVTYPER_EVTCOUNT;
|
|
uint16_t event_idx = supported_event_map[event];
|
|
uint64_t delta = UINT32_MAX -
|
|
(uint32_t)env->cp15.c14_pmevcntr[counter] + 1;
|
|
int64_t overflow_in = pm_events[event_idx].ns_per_count(delta);
|
|
|
|
if (overflow_in > 0) {
|
|
int64_t overflow_at = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) +
|
|
overflow_in;
|
|
ARMCPU *cpu = env_archcpu(env);
|
|
timer_mod_anticipate_ns(cpu->pmu_timer, overflow_at);
|
|
}
|
|
#endif
|
|
|
|
env->cp15.c14_pmevcntr_delta[counter] -=
|
|
env->cp15.c14_pmevcntr[counter];
|
|
}
|
|
}
|
|
|
|
void pmu_op_start(CPUARMState *env)
|
|
{
|
|
unsigned int i;
|
|
pmccntr_op_start(env);
|
|
for (i = 0; i < pmu_num_counters(env); i++) {
|
|
pmevcntr_op_start(env, i);
|
|
}
|
|
}
|
|
|
|
void pmu_op_finish(CPUARMState *env)
|
|
{
|
|
unsigned int i;
|
|
pmccntr_op_finish(env);
|
|
for (i = 0; i < pmu_num_counters(env); i++) {
|
|
pmevcntr_op_finish(env, i);
|
|
}
|
|
}
|
|
|
|
void pmu_pre_el_change(ARMCPU *cpu, void *ignored)
|
|
{
|
|
pmu_op_start(&cpu->env);
|
|
}
|
|
|
|
void pmu_post_el_change(ARMCPU *cpu, void *ignored)
|
|
{
|
|
pmu_op_finish(&cpu->env);
|
|
}
|
|
|
|
void arm_pmu_timer_cb(void *opaque)
|
|
{
|
|
ARMCPU *cpu = opaque;
|
|
|
|
/*
|
|
* Update all the counter values based on the current underlying counts,
|
|
* triggering interrupts to be raised, if necessary. pmu_op_finish() also
|
|
* has the effect of setting the cpu->pmu_timer to the next earliest time a
|
|
* counter may expire.
|
|
*/
|
|
pmu_op_start(&cpu->env);
|
|
pmu_op_finish(&cpu->env);
|
|
}
|
|
|
|
static void pmcr_write(CPUARMState *env, const ARMCPRegInfo *ri,
|
|
uint64_t value)
|
|
{
|
|
pmu_op_start(env);
|
|
|
|
if (value & PMCRC) {
|
|
/* The counter has been reset */
|
|
env->cp15.c15_ccnt = 0;
|
|
}
|
|
|
|
if (value & PMCRP) {
|
|
unsigned int i;
|
|
for (i = 0; i < pmu_num_counters(env); i++) {
|
|
env->cp15.c14_pmevcntr[i] = 0;
|
|
}
|
|
}
|
|
|
|
/* only the DP, X, D and E bits are writable */
|
|
env->cp15.c9_pmcr &= ~0x39;
|
|
env->cp15.c9_pmcr |= (value & 0x39);
|
|
|
|
pmu_op_finish(env);
|
|
}
|
|
|
|
static void pmswinc_write(CPUARMState *env, const ARMCPRegInfo *ri,
|
|
uint64_t value)
|
|
{
|
|
unsigned int i;
|
|
for (i = 0; i < pmu_num_counters(env); i++) {
|
|
/* Increment a counter's count iff: */
|
|
if ((value & (1 << i)) && /* counter's bit is set */
|
|
/* counter is enabled and not filtered */
|
|
pmu_counter_enabled(env, i) &&
|
|
/* counter is SW_INCR */
|
|
(env->cp15.c14_pmevtyper[i] & PMXEVTYPER_EVTCOUNT) == 0x0) {
|
|
pmevcntr_op_start(env, i);
|
|
|
|
/*
|
|
* Detect if this write causes an overflow since we can't predict
|
|
* PMSWINC overflows like we can for other events
|
|
*/
|
|
uint32_t new_pmswinc = env->cp15.c14_pmevcntr[i] + 1;
|
|
|
|
if (env->cp15.c14_pmevcntr[i] & ~new_pmswinc & INT32_MIN) {
|
|
env->cp15.c9_pmovsr |= (1 << i);
|
|
pmu_update_irq(env);
|
|
}
|
|
|
|
env->cp15.c14_pmevcntr[i] = new_pmswinc;
|
|
|
|
pmevcntr_op_finish(env, i);
|
|
}
|
|
}
|
|
}
|
|
|
|
static uint64_t pmccntr_read(CPUARMState *env, const ARMCPRegInfo *ri)
|
|
{
|
|
uint64_t ret;
|
|
pmccntr_op_start(env);
|
|
ret = env->cp15.c15_ccnt;
|
|
pmccntr_op_finish(env);
|
|
return ret;
|
|
}
|
|
|
|
static void pmselr_write(CPUARMState *env, const ARMCPRegInfo *ri,
|
|
uint64_t value)
|
|
{
|
|
/* The value of PMSELR.SEL affects the behavior of PMXEVTYPER and
|
|
* PMXEVCNTR. We allow [0..31] to be written to PMSELR here; in the
|
|
* meanwhile, we check PMSELR.SEL when PMXEVTYPER and PMXEVCNTR are
|
|
* accessed.
|
|
*/
|
|
env->cp15.c9_pmselr = value & 0x1f;
|
|
}
|
|
|
|
static void pmccntr_write(CPUARMState *env, const ARMCPRegInfo *ri,
|
|
uint64_t value)
|
|
{
|
|
pmccntr_op_start(env);
|
|
env->cp15.c15_ccnt = value;
|
|
pmccntr_op_finish(env);
|
|
}
|
|
|
|
static void pmccntr_write32(CPUARMState *env, const ARMCPRegInfo *ri,
|
|
uint64_t value)
|
|
{
|
|
uint64_t cur_val = pmccntr_read(env, NULL);
|
|
|
|
pmccntr_write(env, ri, deposit64(cur_val, 0, 32, value));
|
|
}
|
|
|
|
static void pmccfiltr_write(CPUARMState *env, const ARMCPRegInfo *ri,
|
|
uint64_t value)
|
|
{
|
|
pmccntr_op_start(env);
|
|
env->cp15.pmccfiltr_el0 = value & PMCCFILTR_EL0;
|
|
pmccntr_op_finish(env);
|
|
}
|
|
|
|
static void pmccfiltr_write_a32(CPUARMState *env, const ARMCPRegInfo *ri,
|
|
uint64_t value)
|
|
{
|
|
pmccntr_op_start(env);
|
|
/* M is not accessible from AArch32 */
|
|
env->cp15.pmccfiltr_el0 = (env->cp15.pmccfiltr_el0 & PMCCFILTR_M) |
|
|
(value & PMCCFILTR);
|
|
pmccntr_op_finish(env);
|
|
}
|
|
|
|
static uint64_t pmccfiltr_read_a32(CPUARMState *env, const ARMCPRegInfo *ri)
|
|
{
|
|
/* M is not visible in AArch32 */
|
|
return env->cp15.pmccfiltr_el0 & PMCCFILTR;
|
|
}
|
|
|
|
static void pmcntenset_write(CPUARMState *env, const ARMCPRegInfo *ri,
|
|
uint64_t value)
|
|
{
|
|
value &= pmu_counter_mask(env);
|
|
env->cp15.c9_pmcnten |= value;
|
|
}
|
|
|
|
static void pmcntenclr_write(CPUARMState *env, const ARMCPRegInfo *ri,
|
|
uint64_t value)
|
|
{
|
|
value &= pmu_counter_mask(env);
|
|
env->cp15.c9_pmcnten &= ~value;
|
|
}
|
|
|
|
static void pmovsr_write(CPUARMState *env, const ARMCPRegInfo *ri,
|
|
uint64_t value)
|
|
{
|
|
value &= pmu_counter_mask(env);
|
|
env->cp15.c9_pmovsr &= ~value;
|
|
pmu_update_irq(env);
|
|
}
|
|
|
|
static void pmovsset_write(CPUARMState *env, const ARMCPRegInfo *ri,
|
|
uint64_t value)
|
|
{
|
|
value &= pmu_counter_mask(env);
|
|
env->cp15.c9_pmovsr |= value;
|
|
pmu_update_irq(env);
|
|
}
|
|
|
|
static void pmevtyper_write(CPUARMState *env, const ARMCPRegInfo *ri,
|
|
uint64_t value, const uint8_t counter)
|
|
{
|
|
if (counter == 31) {
|
|
pmccfiltr_write(env, ri, value);
|
|
} else if (counter < pmu_num_counters(env)) {
|
|
pmevcntr_op_start(env, counter);
|
|
|
|
/*
|
|
* If this counter's event type is changing, store the current
|
|
* underlying count for the new type in c14_pmevcntr_delta[counter] so
|
|
* pmevcntr_op_finish has the correct baseline when it converts back to
|
|
* a delta.
|
|
*/
|
|
uint16_t old_event = env->cp15.c14_pmevtyper[counter] &
|
|
PMXEVTYPER_EVTCOUNT;
|
|
uint16_t new_event = value & PMXEVTYPER_EVTCOUNT;
|
|
if (old_event != new_event) {
|
|
uint64_t count = 0;
|
|
if (event_supported(new_event)) {
|
|
uint16_t event_idx = supported_event_map[new_event];
|
|
count = pm_events[event_idx].get_count(env);
|
|
}
|
|
env->cp15.c14_pmevcntr_delta[counter] = count;
|
|
}
|
|
|
|
env->cp15.c14_pmevtyper[counter] = value & PMXEVTYPER_MASK;
|
|
pmevcntr_op_finish(env, counter);
|
|
}
|
|
/* Attempts to access PMXEVTYPER are CONSTRAINED UNPREDICTABLE when
|
|
* PMSELR value is equal to or greater than the number of implemented
|
|
* counters, but not equal to 0x1f. We opt to behave as a RAZ/WI.
|
|
*/
|
|
}
|
|
|
|
static uint64_t pmevtyper_read(CPUARMState *env, const ARMCPRegInfo *ri,
|
|
const uint8_t counter)
|
|
{
|
|
if (counter == 31) {
|
|
return env->cp15.pmccfiltr_el0;
|
|
} else if (counter < pmu_num_counters(env)) {
|
|
return env->cp15.c14_pmevtyper[counter];
|
|
} else {
|
|
/*
|
|
* We opt to behave as a RAZ/WI when attempts to access PMXEVTYPER
|
|
* are CONSTRAINED UNPREDICTABLE. See comments in pmevtyper_write().
|
|
*/
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
static void pmevtyper_writefn(CPUARMState *env, const ARMCPRegInfo *ri,
|
|
uint64_t value)
|
|
{
|
|
uint8_t counter = ((ri->crm & 3) << 3) | (ri->opc2 & 7);
|
|
pmevtyper_write(env, ri, value, counter);
|
|
}
|
|
|
|
static void pmevtyper_rawwrite(CPUARMState *env, const ARMCPRegInfo *ri,
|
|
uint64_t value)
|
|
{
|
|
uint8_t counter = ((ri->crm & 3) << 3) | (ri->opc2 & 7);
|
|
env->cp15.c14_pmevtyper[counter] = value;
|
|
|
|
/*
|
|
* pmevtyper_rawwrite is called between a pair of pmu_op_start and
|
|
* pmu_op_finish calls when loading saved state for a migration. Because
|
|
* we're potentially updating the type of event here, the value written to
|
|
* c14_pmevcntr_delta by the preceeding pmu_op_start call may be for a
|
|
* different counter type. Therefore, we need to set this value to the
|
|
* current count for the counter type we're writing so that pmu_op_finish
|
|
* has the correct count for its calculation.
|
|
*/
|
|
uint16_t event = value & PMXEVTYPER_EVTCOUNT;
|
|
if (event_supported(event)) {
|
|
uint16_t event_idx = supported_event_map[event];
|
|
env->cp15.c14_pmevcntr_delta[counter] =
|
|
pm_events[event_idx].get_count(env);
|
|
}
|
|
}
|
|
|
|
static uint64_t pmevtyper_readfn(CPUARMState *env, const ARMCPRegInfo *ri)
|
|
{
|
|
uint8_t counter = ((ri->crm & 3) << 3) | (ri->opc2 & 7);
|
|
return pmevtyper_read(env, ri, counter);
|
|
}
|
|
|
|
static void pmxevtyper_write(CPUARMState *env, const ARMCPRegInfo *ri,
|
|
uint64_t value)
|
|
{
|
|
pmevtyper_write(env, ri, value, env->cp15.c9_pmselr & 31);
|
|
}
|
|
|
|
static uint64_t pmxevtyper_read(CPUARMState *env, const ARMCPRegInfo *ri)
|
|
{
|
|
return pmevtyper_read(env, ri, env->cp15.c9_pmselr & 31);
|
|
}
|
|
|
|
static void pmevcntr_write(CPUARMState *env, const ARMCPRegInfo *ri,
|
|
uint64_t value, uint8_t counter)
|
|
{
|
|
if (counter < pmu_num_counters(env)) {
|
|
pmevcntr_op_start(env, counter);
|
|
env->cp15.c14_pmevcntr[counter] = value;
|
|
pmevcntr_op_finish(env, counter);
|
|
}
|
|
/*
|
|
* We opt to behave as a RAZ/WI when attempts to access PM[X]EVCNTR
|
|
* are CONSTRAINED UNPREDICTABLE.
|
|
*/
|
|
}
|
|
|
|
static uint64_t pmevcntr_read(CPUARMState *env, const ARMCPRegInfo *ri,
|
|
uint8_t counter)
|
|
{
|
|
if (counter < pmu_num_counters(env)) {
|
|
uint64_t ret;
|
|
pmevcntr_op_start(env, counter);
|
|
ret = env->cp15.c14_pmevcntr[counter];
|
|
pmevcntr_op_finish(env, counter);
|
|
return ret;
|
|
} else {
|
|
/* We opt to behave as a RAZ/WI when attempts to access PM[X]EVCNTR
|
|
* are CONSTRAINED UNPREDICTABLE. */
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
static void pmevcntr_writefn(CPUARMState *env, const ARMCPRegInfo *ri,
|
|
uint64_t value)
|
|
{
|
|
uint8_t counter = ((ri->crm & 3) << 3) | (ri->opc2 & 7);
|
|
pmevcntr_write(env, ri, value, counter);
|
|
}
|
|
|
|
static uint64_t pmevcntr_readfn(CPUARMState *env, const ARMCPRegInfo *ri)
|
|
{
|
|
uint8_t counter = ((ri->crm & 3) << 3) | (ri->opc2 & 7);
|
|
return pmevcntr_read(env, ri, counter);
|
|
}
|
|
|
|
static void pmevcntr_rawwrite(CPUARMState *env, const ARMCPRegInfo *ri,
|
|
uint64_t value)
|
|
{
|
|
uint8_t counter = ((ri->crm & 3) << 3) | (ri->opc2 & 7);
|
|
assert(counter < pmu_num_counters(env));
|
|
env->cp15.c14_pmevcntr[counter] = value;
|
|
pmevcntr_write(env, ri, value, counter);
|
|
}
|
|
|
|
static uint64_t pmevcntr_rawread(CPUARMState *env, const ARMCPRegInfo *ri)
|
|
{
|
|
uint8_t counter = ((ri->crm & 3) << 3) | (ri->opc2 & 7);
|
|
assert(counter < pmu_num_counters(env));
|
|
return env->cp15.c14_pmevcntr[counter];
|
|
}
|
|
|
|
static void pmxevcntr_write(CPUARMState *env, const ARMCPRegInfo *ri,
|
|
uint64_t value)
|
|
{
|
|
pmevcntr_write(env, ri, value, env->cp15.c9_pmselr & 31);
|
|
}
|
|
|
|
static uint64_t pmxevcntr_read(CPUARMState *env, const ARMCPRegInfo *ri)
|
|
{
|
|
return pmevcntr_read(env, ri, env->cp15.c9_pmselr & 31);
|
|
}
|
|
|
|
static void pmuserenr_write(CPUARMState *env, const ARMCPRegInfo *ri,
|
|
uint64_t value)
|
|
{
|
|
if (arm_feature(env, ARM_FEATURE_V8)) {
|
|
env->cp15.c9_pmuserenr = value & 0xf;
|
|
} else {
|
|
env->cp15.c9_pmuserenr = value & 1;
|
|
}
|
|
}
|
|
|
|
static void pmintenset_write(CPUARMState *env, const ARMCPRegInfo *ri,
|
|
uint64_t value)
|
|
{
|
|
/* We have no event counters so only the C bit can be changed */
|
|
value &= pmu_counter_mask(env);
|
|
env->cp15.c9_pminten |= value;
|
|
pmu_update_irq(env);
|
|
}
|
|
|
|
static void pmintenclr_write(CPUARMState *env, const ARMCPRegInfo *ri,
|
|
uint64_t value)
|
|
{
|
|
value &= pmu_counter_mask(env);
|
|
env->cp15.c9_pminten &= ~value;
|
|
pmu_update_irq(env);
|
|
}
|
|
|
|
static void vbar_write(CPUARMState *env, const ARMCPRegInfo *ri,
|
|
uint64_t value)
|
|
{
|
|
/* Note that even though the AArch64 view of this register has bits
|
|
* [10:0] all RES0 we can only mask the bottom 5, to comply with the
|
|
* architectural requirements for bits which are RES0 only in some
|
|
* contexts. (ARMv8 would permit us to do no masking at all, but ARMv7
|
|
* requires the bottom five bits to be RAZ/WI because they're UNK/SBZP.)
|
|
*/
|
|
raw_write(env, ri, value & ~0x1FULL);
|
|
}
|
|
|
|
static void scr_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t value)
|
|
{
|
|
/* Begin with base v8.0 state. */
|
|
uint32_t valid_mask = 0x3fff;
|
|
ARMCPU *cpu = env_archcpu(env);
|
|
|
|
if (arm_el_is_aa64(env, 3)) {
|
|
value |= SCR_FW | SCR_AW; /* these two bits are RES1. */
|
|
valid_mask &= ~SCR_NET;
|
|
} else {
|
|
valid_mask &= ~(SCR_RW | SCR_ST);
|
|
}
|
|
|
|
if (!arm_feature(env, ARM_FEATURE_EL2)) {
|
|
valid_mask &= ~SCR_HCE;
|
|
|
|
/* On ARMv7, SMD (or SCD as it is called in v7) is only
|
|
* supported if EL2 exists. The bit is UNK/SBZP when
|
|
* EL2 is unavailable. In QEMU ARMv7, we force it to always zero
|
|
* when EL2 is unavailable.
|
|
* On ARMv8, this bit is always available.
|
|
*/
|
|
if (arm_feature(env, ARM_FEATURE_V7) &&
|
|
!arm_feature(env, ARM_FEATURE_V8)) {
|
|
valid_mask &= ~SCR_SMD;
|
|
}
|
|
}
|
|
if (cpu_isar_feature(aa64_lor, cpu)) {
|
|
valid_mask |= SCR_TLOR;
|
|
}
|
|
if (cpu_isar_feature(aa64_pauth, cpu)) {
|
|
valid_mask |= SCR_API | SCR_APK;
|
|
}
|
|
|
|
/* Clear all-context RES0 bits. */
|
|
value &= valid_mask;
|
|
raw_write(env, ri, value);
|
|
}
|
|
|
|
static CPAccessResult access_aa64_tid2(CPUARMState *env,
|
|
const ARMCPRegInfo *ri,
|
|
bool isread)
|
|
{
|
|
if (arm_current_el(env) == 1 && (arm_hcr_el2_eff(env) & HCR_TID2)) {
|
|
return CP_ACCESS_TRAP_EL2;
|
|
}
|
|
|
|
return CP_ACCESS_OK;
|
|
}
|
|
|
|
static uint64_t ccsidr_read(CPUARMState *env, const ARMCPRegInfo *ri)
|
|
{
|
|
ARMCPU *cpu = env_archcpu(env);
|
|
|
|
/* Acquire the CSSELR index from the bank corresponding to the CCSIDR
|
|
* bank
|
|
*/
|
|
uint32_t index = A32_BANKED_REG_GET(env, csselr,
|
|
ri->secure & ARM_CP_SECSTATE_S);
|
|
|
|
return cpu->ccsidr[index];
|
|
}
|
|
|
|
static void csselr_write(CPUARMState *env, const ARMCPRegInfo *ri,
|
|
uint64_t value)
|
|
{
|
|
raw_write(env, ri, value & 0xf);
|
|
}
|
|
|
|
static uint64_t isr_read(CPUARMState *env, const ARMCPRegInfo *ri)
|
|
{
|
|
CPUState *cs = env_cpu(env);
|
|
uint64_t hcr_el2 = arm_hcr_el2_eff(env);
|
|
uint64_t ret = 0;
|
|
bool allow_virt = (arm_current_el(env) == 1 &&
|
|
(!arm_is_secure_below_el3(env) ||
|
|
(env->cp15.scr_el3 & SCR_EEL2)));
|
|
|
|
if (allow_virt && (hcr_el2 & HCR_IMO)) {
|
|
if (cs->interrupt_request & CPU_INTERRUPT_VIRQ) {
|
|
ret |= CPSR_I;
|
|
}
|
|
} else {
|
|
if (cs->interrupt_request & CPU_INTERRUPT_HARD) {
|
|
ret |= CPSR_I;
|
|
}
|
|
}
|
|
|
|
if (allow_virt && (hcr_el2 & HCR_FMO)) {
|
|
if (cs->interrupt_request & CPU_INTERRUPT_VFIQ) {
|
|
ret |= CPSR_F;
|
|
}
|
|
} else {
|
|
if (cs->interrupt_request & CPU_INTERRUPT_FIQ) {
|
|
ret |= CPSR_F;
|
|
}
|
|
}
|
|
|
|
/* External aborts are not possible in QEMU so A bit is always clear */
|
|
return ret;
|
|
}
|
|
|
|
static CPAccessResult access_aa64_tid1(CPUARMState *env, const ARMCPRegInfo *ri,
|
|
bool isread)
|
|
{
|
|
if (arm_current_el(env) == 1 && (arm_hcr_el2_eff(env) & HCR_TID1)) {
|
|
return CP_ACCESS_TRAP_EL2;
|
|
}
|
|
|
|
return CP_ACCESS_OK;
|
|
}
|
|
|
|
static CPAccessResult access_aa32_tid1(CPUARMState *env, const ARMCPRegInfo *ri,
|
|
bool isread)
|
|
{
|
|
if (arm_feature(env, ARM_FEATURE_V8)) {
|
|
return access_aa64_tid1(env, ri, isread);
|
|
}
|
|
|
|
return CP_ACCESS_OK;
|
|
}
|
|
|
|
static const ARMCPRegInfo v7_cp_reginfo[] = {
|
|
/* the old v6 WFI, UNPREDICTABLE in v7 but we choose to NOP */
|
|
{ .name = "NOP", .cp = 15, .crn = 7, .crm = 0, .opc1 = 0, .opc2 = 4,
|
|
.access = PL1_W, .type = ARM_CP_NOP },
|
|
/* Performance monitors are implementation defined in v7,
|
|
* but with an ARM recommended set of registers, which we
|
|
* follow.
|
|
*
|
|
* Performance registers fall into three categories:
|
|
* (a) always UNDEF in PL0, RW in PL1 (PMINTENSET, PMINTENCLR)
|
|
* (b) RO in PL0 (ie UNDEF on write), RW in PL1 (PMUSERENR)
|
|
* (c) UNDEF in PL0 if PMUSERENR.EN==0, otherwise accessible (all others)
|
|
* For the cases controlled by PMUSERENR we must set .access to PL0_RW
|
|
* or PL0_RO as appropriate and then check PMUSERENR in the helper fn.
|
|
*/
|
|
{ .name = "PMCNTENSET", .cp = 15, .crn = 9, .crm = 12, .opc1 = 0, .opc2 = 1,
|
|
.access = PL0_RW, .type = ARM_CP_ALIAS,
|
|
.fieldoffset = offsetoflow32(CPUARMState, cp15.c9_pmcnten),
|
|
.writefn = pmcntenset_write,
|
|
.accessfn = pmreg_access,
|
|
.raw_writefn = raw_write },
|
|
{ .name = "PMCNTENSET_EL0", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 3, .opc1 = 3, .crn = 9, .crm = 12, .opc2 = 1,
|
|
.access = PL0_RW, .accessfn = pmreg_access,
|
|
.fieldoffset = offsetof(CPUARMState, cp15.c9_pmcnten), .resetvalue = 0,
|
|
.writefn = pmcntenset_write, .raw_writefn = raw_write },
|
|
{ .name = "PMCNTENCLR", .cp = 15, .crn = 9, .crm = 12, .opc1 = 0, .opc2 = 2,
|
|
.access = PL0_RW,
|
|
.fieldoffset = offsetoflow32(CPUARMState, cp15.c9_pmcnten),
|
|
.accessfn = pmreg_access,
|
|
.writefn = pmcntenclr_write,
|
|
.type = ARM_CP_ALIAS },
|
|
{ .name = "PMCNTENCLR_EL0", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 3, .opc1 = 3, .crn = 9, .crm = 12, .opc2 = 2,
|
|
.access = PL0_RW, .accessfn = pmreg_access,
|
|
.type = ARM_CP_ALIAS,
|
|
.fieldoffset = offsetof(CPUARMState, cp15.c9_pmcnten),
|
|
.writefn = pmcntenclr_write },
|
|
{ .name = "PMOVSR", .cp = 15, .crn = 9, .crm = 12, .opc1 = 0, .opc2 = 3,
|
|
.access = PL0_RW, .type = ARM_CP_IO,
|
|
.fieldoffset = offsetoflow32(CPUARMState, cp15.c9_pmovsr),
|
|
.accessfn = pmreg_access,
|
|
.writefn = pmovsr_write,
|
|
.raw_writefn = raw_write },
|
|
{ .name = "PMOVSCLR_EL0", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 3, .opc1 = 3, .crn = 9, .crm = 12, .opc2 = 3,
|
|
.access = PL0_RW, .accessfn = pmreg_access,
|
|
.type = ARM_CP_ALIAS | ARM_CP_IO,
|
|
.fieldoffset = offsetof(CPUARMState, cp15.c9_pmovsr),
|
|
.writefn = pmovsr_write,
|
|
.raw_writefn = raw_write },
|
|
{ .name = "PMSWINC", .cp = 15, .crn = 9, .crm = 12, .opc1 = 0, .opc2 = 4,
|
|
.access = PL0_W, .accessfn = pmreg_access_swinc,
|
|
.type = ARM_CP_NO_RAW | ARM_CP_IO,
|
|
.writefn = pmswinc_write },
|
|
{ .name = "PMSWINC_EL0", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 3, .opc1 = 3, .crn = 9, .crm = 12, .opc2 = 4,
|
|
.access = PL0_W, .accessfn = pmreg_access_swinc,
|
|
.type = ARM_CP_NO_RAW | ARM_CP_IO,
|
|
.writefn = pmswinc_write },
|
|
{ .name = "PMSELR", .cp = 15, .crn = 9, .crm = 12, .opc1 = 0, .opc2 = 5,
|
|
.access = PL0_RW, .type = ARM_CP_ALIAS,
|
|
.fieldoffset = offsetoflow32(CPUARMState, cp15.c9_pmselr),
|
|
.accessfn = pmreg_access_selr, .writefn = pmselr_write,
|
|
.raw_writefn = raw_write},
|
|
{ .name = "PMSELR_EL0", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 3, .opc1 = 3, .crn = 9, .crm = 12, .opc2 = 5,
|
|
.access = PL0_RW, .accessfn = pmreg_access_selr,
|
|
.fieldoffset = offsetof(CPUARMState, cp15.c9_pmselr),
|
|
.writefn = pmselr_write, .raw_writefn = raw_write, },
|
|
{ .name = "PMCCNTR", .cp = 15, .crn = 9, .crm = 13, .opc1 = 0, .opc2 = 0,
|
|
.access = PL0_RW, .resetvalue = 0, .type = ARM_CP_ALIAS | ARM_CP_IO,
|
|
.readfn = pmccntr_read, .writefn = pmccntr_write32,
|
|
.accessfn = pmreg_access_ccntr },
|
|
{ .name = "PMCCNTR_EL0", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 3, .opc1 = 3, .crn = 9, .crm = 13, .opc2 = 0,
|
|
.access = PL0_RW, .accessfn = pmreg_access_ccntr,
|
|
.type = ARM_CP_IO,
|
|
.fieldoffset = offsetof(CPUARMState, cp15.c15_ccnt),
|
|
.readfn = pmccntr_read, .writefn = pmccntr_write,
|
|
.raw_readfn = raw_read, .raw_writefn = raw_write, },
|
|
{ .name = "PMCCFILTR", .cp = 15, .opc1 = 0, .crn = 14, .crm = 15, .opc2 = 7,
|
|
.writefn = pmccfiltr_write_a32, .readfn = pmccfiltr_read_a32,
|
|
.access = PL0_RW, .accessfn = pmreg_access,
|
|
.type = ARM_CP_ALIAS | ARM_CP_IO,
|
|
.resetvalue = 0, },
|
|
{ .name = "PMCCFILTR_EL0", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 3, .opc1 = 3, .crn = 14, .crm = 15, .opc2 = 7,
|
|
.writefn = pmccfiltr_write, .raw_writefn = raw_write,
|
|
.access = PL0_RW, .accessfn = pmreg_access,
|
|
.type = ARM_CP_IO,
|
|
.fieldoffset = offsetof(CPUARMState, cp15.pmccfiltr_el0),
|
|
.resetvalue = 0, },
|
|
{ .name = "PMXEVTYPER", .cp = 15, .crn = 9, .crm = 13, .opc1 = 0, .opc2 = 1,
|
|
.access = PL0_RW, .type = ARM_CP_NO_RAW | ARM_CP_IO,
|
|
.accessfn = pmreg_access,
|
|
.writefn = pmxevtyper_write, .readfn = pmxevtyper_read },
|
|
{ .name = "PMXEVTYPER_EL0", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 3, .opc1 = 3, .crn = 9, .crm = 13, .opc2 = 1,
|
|
.access = PL0_RW, .type = ARM_CP_NO_RAW | ARM_CP_IO,
|
|
.accessfn = pmreg_access,
|
|
.writefn = pmxevtyper_write, .readfn = pmxevtyper_read },
|
|
{ .name = "PMXEVCNTR", .cp = 15, .crn = 9, .crm = 13, .opc1 = 0, .opc2 = 2,
|
|
.access = PL0_RW, .type = ARM_CP_NO_RAW | ARM_CP_IO,
|
|
.accessfn = pmreg_access_xevcntr,
|
|
.writefn = pmxevcntr_write, .readfn = pmxevcntr_read },
|
|
{ .name = "PMXEVCNTR_EL0", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 3, .opc1 = 3, .crn = 9, .crm = 13, .opc2 = 2,
|
|
.access = PL0_RW, .type = ARM_CP_NO_RAW | ARM_CP_IO,
|
|
.accessfn = pmreg_access_xevcntr,
|
|
.writefn = pmxevcntr_write, .readfn = pmxevcntr_read },
|
|
{ .name = "PMUSERENR", .cp = 15, .crn = 9, .crm = 14, .opc1 = 0, .opc2 = 0,
|
|
.access = PL0_R | PL1_RW, .accessfn = access_tpm,
|
|
.fieldoffset = offsetoflow32(CPUARMState, cp15.c9_pmuserenr),
|
|
.resetvalue = 0,
|
|
.writefn = pmuserenr_write, .raw_writefn = raw_write },
|
|
{ .name = "PMUSERENR_EL0", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 3, .opc1 = 3, .crn = 9, .crm = 14, .opc2 = 0,
|
|
.access = PL0_R | PL1_RW, .accessfn = access_tpm, .type = ARM_CP_ALIAS,
|
|
.fieldoffset = offsetof(CPUARMState, cp15.c9_pmuserenr),
|
|
.resetvalue = 0,
|
|
.writefn = pmuserenr_write, .raw_writefn = raw_write },
|
|
{ .name = "PMINTENSET", .cp = 15, .crn = 9, .crm = 14, .opc1 = 0, .opc2 = 1,
|
|
.access = PL1_RW, .accessfn = access_tpm,
|
|
.type = ARM_CP_ALIAS | ARM_CP_IO,
|
|
.fieldoffset = offsetoflow32(CPUARMState, cp15.c9_pminten),
|
|
.resetvalue = 0,
|
|
.writefn = pmintenset_write, .raw_writefn = raw_write },
|
|
{ .name = "PMINTENSET_EL1", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 3, .opc1 = 0, .crn = 9, .crm = 14, .opc2 = 1,
|
|
.access = PL1_RW, .accessfn = access_tpm,
|
|
.type = ARM_CP_IO,
|
|
.fieldoffset = offsetof(CPUARMState, cp15.c9_pminten),
|
|
.writefn = pmintenset_write, .raw_writefn = raw_write,
|
|
.resetvalue = 0x0 },
|
|
{ .name = "PMINTENCLR", .cp = 15, .crn = 9, .crm = 14, .opc1 = 0, .opc2 = 2,
|
|
.access = PL1_RW, .accessfn = access_tpm,
|
|
.type = ARM_CP_ALIAS | ARM_CP_IO,
|
|
.fieldoffset = offsetof(CPUARMState, cp15.c9_pminten),
|
|
.writefn = pmintenclr_write, },
|
|
{ .name = "PMINTENCLR_EL1", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 3, .opc1 = 0, .crn = 9, .crm = 14, .opc2 = 2,
|
|
.access = PL1_RW, .accessfn = access_tpm,
|
|
.type = ARM_CP_ALIAS | ARM_CP_IO,
|
|
.fieldoffset = offsetof(CPUARMState, cp15.c9_pminten),
|
|
.writefn = pmintenclr_write },
|
|
{ .name = "CCSIDR", .state = ARM_CP_STATE_BOTH,
|
|
.opc0 = 3, .crn = 0, .crm = 0, .opc1 = 1, .opc2 = 0,
|
|
.access = PL1_R,
|
|
.accessfn = access_aa64_tid2,
|
|
.readfn = ccsidr_read, .type = ARM_CP_NO_RAW },
|
|
{ .name = "CSSELR", .state = ARM_CP_STATE_BOTH,
|
|
.opc0 = 3, .crn = 0, .crm = 0, .opc1 = 2, .opc2 = 0,
|
|
.access = PL1_RW,
|
|
.accessfn = access_aa64_tid2,
|
|
.writefn = csselr_write, .resetvalue = 0,
|
|
.bank_fieldoffsets = { offsetof(CPUARMState, cp15.csselr_s),
|
|
offsetof(CPUARMState, cp15.csselr_ns) } },
|
|
/* Auxiliary ID register: this actually has an IMPDEF value but for now
|
|
* just RAZ for all cores:
|
|
*/
|
|
{ .name = "AIDR", .state = ARM_CP_STATE_BOTH,
|
|
.opc0 = 3, .opc1 = 1, .crn = 0, .crm = 0, .opc2 = 7,
|
|
.access = PL1_R, .type = ARM_CP_CONST,
|
|
.accessfn = access_aa64_tid1,
|
|
.resetvalue = 0 },
|
|
/* Auxiliary fault status registers: these also are IMPDEF, and we
|
|
* choose to RAZ/WI for all cores.
|
|
*/
|
|
{ .name = "AFSR0_EL1", .state = ARM_CP_STATE_BOTH,
|
|
.opc0 = 3, .opc1 = 0, .crn = 5, .crm = 1, .opc2 = 0,
|
|
.access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 },
|
|
{ .name = "AFSR1_EL1", .state = ARM_CP_STATE_BOTH,
|
|
.opc0 = 3, .opc1 = 0, .crn = 5, .crm = 1, .opc2 = 1,
|
|
.access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 },
|
|
/* MAIR can just read-as-written because we don't implement caches
|
|
* and so don't need to care about memory attributes.
|
|
*/
|
|
{ .name = "MAIR_EL1", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 3, .opc1 = 0, .crn = 10, .crm = 2, .opc2 = 0,
|
|
.access = PL1_RW, .fieldoffset = offsetof(CPUARMState, cp15.mair_el[1]),
|
|
.resetvalue = 0 },
|
|
{ .name = "MAIR_EL3", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 3, .opc1 = 6, .crn = 10, .crm = 2, .opc2 = 0,
|
|
.access = PL3_RW, .fieldoffset = offsetof(CPUARMState, cp15.mair_el[3]),
|
|
.resetvalue = 0 },
|
|
/* For non-long-descriptor page tables these are PRRR and NMRR;
|
|
* regardless they still act as reads-as-written for QEMU.
|
|
*/
|
|
/* MAIR0/1 are defined separately from their 64-bit counterpart which
|
|
* allows them to assign the correct fieldoffset based on the endianness
|
|
* handled in the field definitions.
|
|
*/
|
|
{ .name = "MAIR0", .state = ARM_CP_STATE_AA32,
|
|
.cp = 15, .opc1 = 0, .crn = 10, .crm = 2, .opc2 = 0, .access = PL1_RW,
|
|
.bank_fieldoffsets = { offsetof(CPUARMState, cp15.mair0_s),
|
|
offsetof(CPUARMState, cp15.mair0_ns) },
|
|
.resetfn = arm_cp_reset_ignore },
|
|
{ .name = "MAIR1", .state = ARM_CP_STATE_AA32,
|
|
.cp = 15, .opc1 = 0, .crn = 10, .crm = 2, .opc2 = 1, .access = PL1_RW,
|
|
.bank_fieldoffsets = { offsetof(CPUARMState, cp15.mair1_s),
|
|
offsetof(CPUARMState, cp15.mair1_ns) },
|
|
.resetfn = arm_cp_reset_ignore },
|
|
{ .name = "ISR_EL1", .state = ARM_CP_STATE_BOTH,
|
|
.opc0 = 3, .opc1 = 0, .crn = 12, .crm = 1, .opc2 = 0,
|
|
.type = ARM_CP_NO_RAW, .access = PL1_R, .readfn = isr_read },
|
|
/* 32 bit ITLB invalidates */
|
|
{ .name = "ITLBIALL", .cp = 15, .opc1 = 0, .crn = 8, .crm = 5, .opc2 = 0,
|
|
.type = ARM_CP_NO_RAW, .access = PL1_W, .writefn = tlbiall_write },
|
|
{ .name = "ITLBIMVA", .cp = 15, .opc1 = 0, .crn = 8, .crm = 5, .opc2 = 1,
|
|
.type = ARM_CP_NO_RAW, .access = PL1_W, .writefn = tlbimva_write },
|
|
{ .name = "ITLBIASID", .cp = 15, .opc1 = 0, .crn = 8, .crm = 5, .opc2 = 2,
|
|
.type = ARM_CP_NO_RAW, .access = PL1_W, .writefn = tlbiasid_write },
|
|
/* 32 bit DTLB invalidates */
|
|
{ .name = "DTLBIALL", .cp = 15, .opc1 = 0, .crn = 8, .crm = 6, .opc2 = 0,
|
|
.type = ARM_CP_NO_RAW, .access = PL1_W, .writefn = tlbiall_write },
|
|
{ .name = "DTLBIMVA", .cp = 15, .opc1 = 0, .crn = 8, .crm = 6, .opc2 = 1,
|
|
.type = ARM_CP_NO_RAW, .access = PL1_W, .writefn = tlbimva_write },
|
|
{ .name = "DTLBIASID", .cp = 15, .opc1 = 0, .crn = 8, .crm = 6, .opc2 = 2,
|
|
.type = ARM_CP_NO_RAW, .access = PL1_W, .writefn = tlbiasid_write },
|
|
/* 32 bit TLB invalidates */
|
|
{ .name = "TLBIALL", .cp = 15, .opc1 = 0, .crn = 8, .crm = 7, .opc2 = 0,
|
|
.type = ARM_CP_NO_RAW, .access = PL1_W, .writefn = tlbiall_write },
|
|
{ .name = "TLBIMVA", .cp = 15, .opc1 = 0, .crn = 8, .crm = 7, .opc2 = 1,
|
|
.type = ARM_CP_NO_RAW, .access = PL1_W, .writefn = tlbimva_write },
|
|
{ .name = "TLBIASID", .cp = 15, .opc1 = 0, .crn = 8, .crm = 7, .opc2 = 2,
|
|
.type = ARM_CP_NO_RAW, .access = PL1_W, .writefn = tlbiasid_write },
|
|
{ .name = "TLBIMVAA", .cp = 15, .opc1 = 0, .crn = 8, .crm = 7, .opc2 = 3,
|
|
.type = ARM_CP_NO_RAW, .access = PL1_W, .writefn = tlbimvaa_write },
|
|
REGINFO_SENTINEL
|
|
};
|
|
|
|
static const ARMCPRegInfo v7mp_cp_reginfo[] = {
|
|
/* 32 bit TLB invalidates, Inner Shareable */
|
|
{ .name = "TLBIALLIS", .cp = 15, .opc1 = 0, .crn = 8, .crm = 3, .opc2 = 0,
|
|
.type = ARM_CP_NO_RAW, .access = PL1_W, .writefn = tlbiall_is_write },
|
|
{ .name = "TLBIMVAIS", .cp = 15, .opc1 = 0, .crn = 8, .crm = 3, .opc2 = 1,
|
|
.type = ARM_CP_NO_RAW, .access = PL1_W, .writefn = tlbimva_is_write },
|
|
{ .name = "TLBIASIDIS", .cp = 15, .opc1 = 0, .crn = 8, .crm = 3, .opc2 = 2,
|
|
.type = ARM_CP_NO_RAW, .access = PL1_W,
|
|
.writefn = tlbiasid_is_write },
|
|
{ .name = "TLBIMVAAIS", .cp = 15, .opc1 = 0, .crn = 8, .crm = 3, .opc2 = 3,
|
|
.type = ARM_CP_NO_RAW, .access = PL1_W,
|
|
.writefn = tlbimvaa_is_write },
|
|
REGINFO_SENTINEL
|
|
};
|
|
|
|
static const ARMCPRegInfo pmovsset_cp_reginfo[] = {
|
|
/* PMOVSSET is not implemented in v7 before v7ve */
|
|
{ .name = "PMOVSSET", .cp = 15, .opc1 = 0, .crn = 9, .crm = 14, .opc2 = 3,
|
|
.access = PL0_RW, .accessfn = pmreg_access,
|
|
.type = ARM_CP_ALIAS | ARM_CP_IO,
|
|
.fieldoffset = offsetoflow32(CPUARMState, cp15.c9_pmovsr),
|
|
.writefn = pmovsset_write,
|
|
.raw_writefn = raw_write },
|
|
{ .name = "PMOVSSET_EL0", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 3, .opc1 = 3, .crn = 9, .crm = 14, .opc2 = 3,
|
|
.access = PL0_RW, .accessfn = pmreg_access,
|
|
.type = ARM_CP_ALIAS | ARM_CP_IO,
|
|
.fieldoffset = offsetof(CPUARMState, cp15.c9_pmovsr),
|
|
.writefn = pmovsset_write,
|
|
.raw_writefn = raw_write },
|
|
REGINFO_SENTINEL
|
|
};
|
|
|
|
static void teecr_write(CPUARMState *env, const ARMCPRegInfo *ri,
|
|
uint64_t value)
|
|
{
|
|
value &= 1;
|
|
env->teecr = value;
|
|
}
|
|
|
|
static CPAccessResult teehbr_access(CPUARMState *env, const ARMCPRegInfo *ri,
|
|
bool isread)
|
|
{
|
|
if (arm_current_el(env) == 0 && (env->teecr & 1)) {
|
|
return CP_ACCESS_TRAP;
|
|
}
|
|
return CP_ACCESS_OK;
|
|
}
|
|
|
|
static const ARMCPRegInfo t2ee_cp_reginfo[] = {
|
|
{ .name = "TEECR", .cp = 14, .crn = 0, .crm = 0, .opc1 = 6, .opc2 = 0,
|
|
.access = PL1_RW, .fieldoffset = offsetof(CPUARMState, teecr),
|
|
.resetvalue = 0,
|
|
.writefn = teecr_write },
|
|
{ .name = "TEEHBR", .cp = 14, .crn = 1, .crm = 0, .opc1 = 6, .opc2 = 0,
|
|
.access = PL0_RW, .fieldoffset = offsetof(CPUARMState, teehbr),
|
|
.accessfn = teehbr_access, .resetvalue = 0 },
|
|
REGINFO_SENTINEL
|
|
};
|
|
|
|
static const ARMCPRegInfo v6k_cp_reginfo[] = {
|
|
{ .name = "TPIDR_EL0", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 3, .opc1 = 3, .opc2 = 2, .crn = 13, .crm = 0,
|
|
.access = PL0_RW,
|
|
.fieldoffset = offsetof(CPUARMState, cp15.tpidr_el[0]), .resetvalue = 0 },
|
|
{ .name = "TPIDRURW", .cp = 15, .crn = 13, .crm = 0, .opc1 = 0, .opc2 = 2,
|
|
.access = PL0_RW,
|
|
.bank_fieldoffsets = { offsetoflow32(CPUARMState, cp15.tpidrurw_s),
|
|
offsetoflow32(CPUARMState, cp15.tpidrurw_ns) },
|
|
.resetfn = arm_cp_reset_ignore },
|
|
{ .name = "TPIDRRO_EL0", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 3, .opc1 = 3, .opc2 = 3, .crn = 13, .crm = 0,
|
|
.access = PL0_R|PL1_W,
|
|
.fieldoffset = offsetof(CPUARMState, cp15.tpidrro_el[0]),
|
|
.resetvalue = 0},
|
|
{ .name = "TPIDRURO", .cp = 15, .crn = 13, .crm = 0, .opc1 = 0, .opc2 = 3,
|
|
.access = PL0_R|PL1_W,
|
|
.bank_fieldoffsets = { offsetoflow32(CPUARMState, cp15.tpidruro_s),
|
|
offsetoflow32(CPUARMState, cp15.tpidruro_ns) },
|
|
.resetfn = arm_cp_reset_ignore },
|
|
{ .name = "TPIDR_EL1", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 3, .opc1 = 0, .opc2 = 4, .crn = 13, .crm = 0,
|
|
.access = PL1_RW,
|
|
.fieldoffset = offsetof(CPUARMState, cp15.tpidr_el[1]), .resetvalue = 0 },
|
|
{ .name = "TPIDRPRW", .opc1 = 0, .cp = 15, .crn = 13, .crm = 0, .opc2 = 4,
|
|
.access = PL1_RW,
|
|
.bank_fieldoffsets = { offsetoflow32(CPUARMState, cp15.tpidrprw_s),
|
|
offsetoflow32(CPUARMState, cp15.tpidrprw_ns) },
|
|
.resetvalue = 0 },
|
|
REGINFO_SENTINEL
|
|
};
|
|
|
|
#ifndef CONFIG_USER_ONLY
|
|
|
|
static CPAccessResult gt_cntfrq_access(CPUARMState *env, const ARMCPRegInfo *ri,
|
|
bool isread)
|
|
{
|
|
/* CNTFRQ: not visible from PL0 if both PL0PCTEN and PL0VCTEN are zero.
|
|
* Writable only at the highest implemented exception level.
|
|
*/
|
|
int el = arm_current_el(env);
|
|
uint64_t hcr;
|
|
uint32_t cntkctl;
|
|
|
|
switch (el) {
|
|
case 0:
|
|
hcr = arm_hcr_el2_eff(env);
|
|
if ((hcr & (HCR_E2H | HCR_TGE)) == (HCR_E2H | HCR_TGE)) {
|
|
cntkctl = env->cp15.cnthctl_el2;
|
|
} else {
|
|
cntkctl = env->cp15.c14_cntkctl;
|
|
}
|
|
if (!extract32(cntkctl, 0, 2)) {
|
|
return CP_ACCESS_TRAP;
|
|
}
|
|
break;
|
|
case 1:
|
|
if (!isread && ri->state == ARM_CP_STATE_AA32 &&
|
|
arm_is_secure_below_el3(env)) {
|
|
/* Accesses from 32-bit Secure EL1 UNDEF (*not* trap to EL3!) */
|
|
return CP_ACCESS_TRAP_UNCATEGORIZED;
|
|
}
|
|
break;
|
|
case 2:
|
|
case 3:
|
|
break;
|
|
}
|
|
|
|
if (!isread && el < arm_highest_el(env)) {
|
|
return CP_ACCESS_TRAP_UNCATEGORIZED;
|
|
}
|
|
|
|
return CP_ACCESS_OK;
|
|
}
|
|
|
|
static CPAccessResult gt_counter_access(CPUARMState *env, int timeridx,
|
|
bool isread)
|
|
{
|
|
unsigned int cur_el = arm_current_el(env);
|
|
bool secure = arm_is_secure(env);
|
|
uint64_t hcr = arm_hcr_el2_eff(env);
|
|
|
|
switch (cur_el) {
|
|
case 0:
|
|
/* If HCR_EL2.<E2H,TGE> == '11': check CNTHCTL_EL2.EL0[PV]CTEN. */
|
|
if ((hcr & (HCR_E2H | HCR_TGE)) == (HCR_E2H | HCR_TGE)) {
|
|
return (extract32(env->cp15.cnthctl_el2, timeridx, 1)
|
|
? CP_ACCESS_OK : CP_ACCESS_TRAP_EL2);
|
|
}
|
|
|
|
/* CNT[PV]CT: not visible from PL0 if EL0[PV]CTEN is zero */
|
|
if (!extract32(env->cp15.c14_cntkctl, timeridx, 1)) {
|
|
return CP_ACCESS_TRAP;
|
|
}
|
|
|
|
/* If HCR_EL2.<E2H,TGE> == '10': check CNTHCTL_EL2.EL1PCTEN. */
|
|
if (hcr & HCR_E2H) {
|
|
if (timeridx == GTIMER_PHYS &&
|
|
!extract32(env->cp15.cnthctl_el2, 10, 1)) {
|
|
return CP_ACCESS_TRAP_EL2;
|
|
}
|
|
} else {
|
|
/* If HCR_EL2.<E2H> == 0: check CNTHCTL_EL2.EL1PCEN. */
|
|
if (arm_feature(env, ARM_FEATURE_EL2) &&
|
|
timeridx == GTIMER_PHYS && !secure &&
|
|
!extract32(env->cp15.cnthctl_el2, 1, 1)) {
|
|
return CP_ACCESS_TRAP_EL2;
|
|
}
|
|
}
|
|
break;
|
|
|
|
case 1:
|
|
/* Check CNTHCTL_EL2.EL1PCTEN, which changes location based on E2H. */
|
|
if (arm_feature(env, ARM_FEATURE_EL2) &&
|
|
timeridx == GTIMER_PHYS && !secure &&
|
|
(hcr & HCR_E2H
|
|
? !extract32(env->cp15.cnthctl_el2, 10, 1)
|
|
: !extract32(env->cp15.cnthctl_el2, 0, 1))) {
|
|
return CP_ACCESS_TRAP_EL2;
|
|
}
|
|
break;
|
|
}
|
|
return CP_ACCESS_OK;
|
|
}
|
|
|
|
static CPAccessResult gt_timer_access(CPUARMState *env, int timeridx,
|
|
bool isread)
|
|
{
|
|
unsigned int cur_el = arm_current_el(env);
|
|
bool secure = arm_is_secure(env);
|
|
uint64_t hcr = arm_hcr_el2_eff(env);
|
|
|
|
switch (cur_el) {
|
|
case 0:
|
|
if ((hcr & (HCR_E2H | HCR_TGE)) == (HCR_E2H | HCR_TGE)) {
|
|
/* If HCR_EL2.<E2H,TGE> == '11': check CNTHCTL_EL2.EL0[PV]TEN. */
|
|
return (extract32(env->cp15.cnthctl_el2, 9 - timeridx, 1)
|
|
? CP_ACCESS_OK : CP_ACCESS_TRAP_EL2);
|
|
}
|
|
|
|
/*
|
|
* CNT[PV]_CVAL, CNT[PV]_CTL, CNT[PV]_TVAL: not visible from
|
|
* EL0 if EL0[PV]TEN is zero.
|
|
*/
|
|
if (!extract32(env->cp15.c14_cntkctl, 9 - timeridx, 1)) {
|
|
return CP_ACCESS_TRAP;
|
|
}
|
|
/* fall through */
|
|
|
|
case 1:
|
|
if (arm_feature(env, ARM_FEATURE_EL2) &&
|
|
timeridx == GTIMER_PHYS && !secure) {
|
|
if (hcr & HCR_E2H) {
|
|
/* If HCR_EL2.<E2H,TGE> == '10': check CNTHCTL_EL2.EL1PTEN. */
|
|
if (!extract32(env->cp15.cnthctl_el2, 11, 1)) {
|
|
return CP_ACCESS_TRAP_EL2;
|
|
}
|
|
} else {
|
|
/* If HCR_EL2.<E2H> == 0: check CNTHCTL_EL2.EL1PCEN. */
|
|
if (!extract32(env->cp15.cnthctl_el2, 1, 1)) {
|
|
return CP_ACCESS_TRAP_EL2;
|
|
}
|
|
}
|
|
}
|
|
break;
|
|
}
|
|
return CP_ACCESS_OK;
|
|
}
|
|
|
|
static CPAccessResult gt_pct_access(CPUARMState *env,
|
|
const ARMCPRegInfo *ri,
|
|
bool isread)
|
|
{
|
|
return gt_counter_access(env, GTIMER_PHYS, isread);
|
|
}
|
|
|
|
static CPAccessResult gt_vct_access(CPUARMState *env,
|
|
const ARMCPRegInfo *ri,
|
|
bool isread)
|
|
{
|
|
return gt_counter_access(env, GTIMER_VIRT, isread);
|
|
}
|
|
|
|
static CPAccessResult gt_ptimer_access(CPUARMState *env, const ARMCPRegInfo *ri,
|
|
bool isread)
|
|
{
|
|
return gt_timer_access(env, GTIMER_PHYS, isread);
|
|
}
|
|
|
|
static CPAccessResult gt_vtimer_access(CPUARMState *env, const ARMCPRegInfo *ri,
|
|
bool isread)
|
|
{
|
|
return gt_timer_access(env, GTIMER_VIRT, isread);
|
|
}
|
|
|
|
static CPAccessResult gt_stimer_access(CPUARMState *env,
|
|
const ARMCPRegInfo *ri,
|
|
bool isread)
|
|
{
|
|
/* The AArch64 register view of the secure physical timer is
|
|
* always accessible from EL3, and configurably accessible from
|
|
* Secure EL1.
|
|
*/
|
|
switch (arm_current_el(env)) {
|
|
case 1:
|
|
if (!arm_is_secure(env)) {
|
|
return CP_ACCESS_TRAP;
|
|
}
|
|
if (!(env->cp15.scr_el3 & SCR_ST)) {
|
|
return CP_ACCESS_TRAP_EL3;
|
|
}
|
|
return CP_ACCESS_OK;
|
|
case 0:
|
|
case 2:
|
|
return CP_ACCESS_TRAP;
|
|
case 3:
|
|
return CP_ACCESS_OK;
|
|
default:
|
|
g_assert_not_reached();
|
|
}
|
|
}
|
|
|
|
static uint64_t gt_get_countervalue(CPUARMState *env)
|
|
{
|
|
ARMCPU *cpu = env_archcpu(env);
|
|
|
|
return qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) / gt_cntfrq_period_ns(cpu);
|
|
}
|
|
|
|
static void gt_recalc_timer(ARMCPU *cpu, int timeridx)
|
|
{
|
|
ARMGenericTimer *gt = &cpu->env.cp15.c14_timer[timeridx];
|
|
|
|
if (gt->ctl & 1) {
|
|
/* Timer enabled: calculate and set current ISTATUS, irq, and
|
|
* reset timer to when ISTATUS next has to change
|
|
*/
|
|
uint64_t offset = timeridx == GTIMER_VIRT ?
|
|
cpu->env.cp15.cntvoff_el2 : 0;
|
|
uint64_t count = gt_get_countervalue(&cpu->env);
|
|
/* Note that this must be unsigned 64 bit arithmetic: */
|
|
int istatus = count - offset >= gt->cval;
|
|
uint64_t nexttick;
|
|
int irqstate;
|
|
|
|
gt->ctl = deposit32(gt->ctl, 2, 1, istatus);
|
|
|
|
irqstate = (istatus && !(gt->ctl & 2));
|
|
qemu_set_irq(cpu->gt_timer_outputs[timeridx], irqstate);
|
|
|
|
if (istatus) {
|
|
/* Next transition is when count rolls back over to zero */
|
|
nexttick = UINT64_MAX;
|
|
} else {
|
|
/* Next transition is when we hit cval */
|
|
nexttick = gt->cval + offset;
|
|
}
|
|
/* Note that the desired next expiry time might be beyond the
|
|
* signed-64-bit range of a QEMUTimer -- in this case we just
|
|
* set the timer for as far in the future as possible. When the
|
|
* timer expires we will reset the timer for any remaining period.
|
|
*/
|
|
if (nexttick > INT64_MAX / gt_cntfrq_period_ns(cpu)) {
|
|
timer_mod_ns(cpu->gt_timer[timeridx], INT64_MAX);
|
|
} else {
|
|
timer_mod(cpu->gt_timer[timeridx], nexttick);
|
|
}
|
|
trace_arm_gt_recalc(timeridx, irqstate, nexttick);
|
|
} else {
|
|
/* Timer disabled: ISTATUS and timer output always clear */
|
|
gt->ctl &= ~4;
|
|
qemu_set_irq(cpu->gt_timer_outputs[timeridx], 0);
|
|
timer_del(cpu->gt_timer[timeridx]);
|
|
trace_arm_gt_recalc_disabled(timeridx);
|
|
}
|
|
}
|
|
|
|
static void gt_timer_reset(CPUARMState *env, const ARMCPRegInfo *ri,
|
|
int timeridx)
|
|
{
|
|
ARMCPU *cpu = env_archcpu(env);
|
|
|
|
timer_del(cpu->gt_timer[timeridx]);
|
|
}
|
|
|
|
static uint64_t gt_cnt_read(CPUARMState *env, const ARMCPRegInfo *ri)
|
|
{
|
|
return gt_get_countervalue(env);
|
|
}
|
|
|
|
static uint64_t gt_virt_cnt_offset(CPUARMState *env)
|
|
{
|
|
uint64_t hcr;
|
|
|
|
switch (arm_current_el(env)) {
|
|
case 2:
|
|
hcr = arm_hcr_el2_eff(env);
|
|
if (hcr & HCR_E2H) {
|
|
return 0;
|
|
}
|
|
break;
|
|
case 0:
|
|
hcr = arm_hcr_el2_eff(env);
|
|
if ((hcr & (HCR_E2H | HCR_TGE)) == (HCR_E2H | HCR_TGE)) {
|
|
return 0;
|
|
}
|
|
break;
|
|
}
|
|
|
|
return env->cp15.cntvoff_el2;
|
|
}
|
|
|
|
static uint64_t gt_virt_cnt_read(CPUARMState *env, const ARMCPRegInfo *ri)
|
|
{
|
|
return gt_get_countervalue(env) - gt_virt_cnt_offset(env);
|
|
}
|
|
|
|
static void gt_cval_write(CPUARMState *env, const ARMCPRegInfo *ri,
|
|
int timeridx,
|
|
uint64_t value)
|
|
{
|
|
trace_arm_gt_cval_write(timeridx, value);
|
|
env->cp15.c14_timer[timeridx].cval = value;
|
|
gt_recalc_timer(env_archcpu(env), timeridx);
|
|
}
|
|
|
|
static uint64_t gt_tval_read(CPUARMState *env, const ARMCPRegInfo *ri,
|
|
int timeridx)
|
|
{
|
|
uint64_t offset = 0;
|
|
|
|
switch (timeridx) {
|
|
case GTIMER_VIRT:
|
|
case GTIMER_HYPVIRT:
|
|
offset = gt_virt_cnt_offset(env);
|
|
break;
|
|
}
|
|
|
|
return (uint32_t)(env->cp15.c14_timer[timeridx].cval -
|
|
(gt_get_countervalue(env) - offset));
|
|
}
|
|
|
|
static void gt_tval_write(CPUARMState *env, const ARMCPRegInfo *ri,
|
|
int timeridx,
|
|
uint64_t value)
|
|
{
|
|
uint64_t offset = 0;
|
|
|
|
switch (timeridx) {
|
|
case GTIMER_VIRT:
|
|
case GTIMER_HYPVIRT:
|
|
offset = gt_virt_cnt_offset(env);
|
|
break;
|
|
}
|
|
|
|
trace_arm_gt_tval_write(timeridx, value);
|
|
env->cp15.c14_timer[timeridx].cval = gt_get_countervalue(env) - offset +
|
|
sextract64(value, 0, 32);
|
|
gt_recalc_timer(env_archcpu(env), timeridx);
|
|
}
|
|
|
|
static void gt_ctl_write(CPUARMState *env, const ARMCPRegInfo *ri,
|
|
int timeridx,
|
|
uint64_t value)
|
|
{
|
|
ARMCPU *cpu = env_archcpu(env);
|
|
uint32_t oldval = env->cp15.c14_timer[timeridx].ctl;
|
|
|
|
trace_arm_gt_ctl_write(timeridx, value);
|
|
env->cp15.c14_timer[timeridx].ctl = deposit64(oldval, 0, 2, value);
|
|
if ((oldval ^ value) & 1) {
|
|
/* Enable toggled */
|
|
gt_recalc_timer(cpu, timeridx);
|
|
} else if ((oldval ^ value) & 2) {
|
|
/* IMASK toggled: don't need to recalculate,
|
|
* just set the interrupt line based on ISTATUS
|
|
*/
|
|
int irqstate = (oldval & 4) && !(value & 2);
|
|
|
|
trace_arm_gt_imask_toggle(timeridx, irqstate);
|
|
qemu_set_irq(cpu->gt_timer_outputs[timeridx], irqstate);
|
|
}
|
|
}
|
|
|
|
static void gt_phys_timer_reset(CPUARMState *env, const ARMCPRegInfo *ri)
|
|
{
|
|
gt_timer_reset(env, ri, GTIMER_PHYS);
|
|
}
|
|
|
|
static void gt_phys_cval_write(CPUARMState *env, const ARMCPRegInfo *ri,
|
|
uint64_t value)
|
|
{
|
|
gt_cval_write(env, ri, GTIMER_PHYS, value);
|
|
}
|
|
|
|
static uint64_t gt_phys_tval_read(CPUARMState *env, const ARMCPRegInfo *ri)
|
|
{
|
|
return gt_tval_read(env, ri, GTIMER_PHYS);
|
|
}
|
|
|
|
static void gt_phys_tval_write(CPUARMState *env, const ARMCPRegInfo *ri,
|
|
uint64_t value)
|
|
{
|
|
gt_tval_write(env, ri, GTIMER_PHYS, value);
|
|
}
|
|
|
|
static void gt_phys_ctl_write(CPUARMState *env, const ARMCPRegInfo *ri,
|
|
uint64_t value)
|
|
{
|
|
gt_ctl_write(env, ri, GTIMER_PHYS, value);
|
|
}
|
|
|
|
static int gt_phys_redir_timeridx(CPUARMState *env)
|
|
{
|
|
switch (arm_mmu_idx(env)) {
|
|
case ARMMMUIdx_E20_0:
|
|
case ARMMMUIdx_E20_2:
|
|
case ARMMMUIdx_E20_2_PAN:
|
|
return GTIMER_HYP;
|
|
default:
|
|
return GTIMER_PHYS;
|
|
}
|
|
}
|
|
|
|
static int gt_virt_redir_timeridx(CPUARMState *env)
|
|
{
|
|
switch (arm_mmu_idx(env)) {
|
|
case ARMMMUIdx_E20_0:
|
|
case ARMMMUIdx_E20_2:
|
|
case ARMMMUIdx_E20_2_PAN:
|
|
return GTIMER_HYPVIRT;
|
|
default:
|
|
return GTIMER_VIRT;
|
|
}
|
|
}
|
|
|
|
static uint64_t gt_phys_redir_cval_read(CPUARMState *env,
|
|
const ARMCPRegInfo *ri)
|
|
{
|
|
int timeridx = gt_phys_redir_timeridx(env);
|
|
return env->cp15.c14_timer[timeridx].cval;
|
|
}
|
|
|
|
static void gt_phys_redir_cval_write(CPUARMState *env, const ARMCPRegInfo *ri,
|
|
uint64_t value)
|
|
{
|
|
int timeridx = gt_phys_redir_timeridx(env);
|
|
gt_cval_write(env, ri, timeridx, value);
|
|
}
|
|
|
|
static uint64_t gt_phys_redir_tval_read(CPUARMState *env,
|
|
const ARMCPRegInfo *ri)
|
|
{
|
|
int timeridx = gt_phys_redir_timeridx(env);
|
|
return gt_tval_read(env, ri, timeridx);
|
|
}
|
|
|
|
static void gt_phys_redir_tval_write(CPUARMState *env, const ARMCPRegInfo *ri,
|
|
uint64_t value)
|
|
{
|
|
int timeridx = gt_phys_redir_timeridx(env);
|
|
gt_tval_write(env, ri, timeridx, value);
|
|
}
|
|
|
|
static uint64_t gt_phys_redir_ctl_read(CPUARMState *env,
|
|
const ARMCPRegInfo *ri)
|
|
{
|
|
int timeridx = gt_phys_redir_timeridx(env);
|
|
return env->cp15.c14_timer[timeridx].ctl;
|
|
}
|
|
|
|
static void gt_phys_redir_ctl_write(CPUARMState *env, const ARMCPRegInfo *ri,
|
|
uint64_t value)
|
|
{
|
|
int timeridx = gt_phys_redir_timeridx(env);
|
|
gt_ctl_write(env, ri, timeridx, value);
|
|
}
|
|
|
|
static void gt_virt_timer_reset(CPUARMState *env, const ARMCPRegInfo *ri)
|
|
{
|
|
gt_timer_reset(env, ri, GTIMER_VIRT);
|
|
}
|
|
|
|
static void gt_virt_cval_write(CPUARMState *env, const ARMCPRegInfo *ri,
|
|
uint64_t value)
|
|
{
|
|
gt_cval_write(env, ri, GTIMER_VIRT, value);
|
|
}
|
|
|
|
static uint64_t gt_virt_tval_read(CPUARMState *env, const ARMCPRegInfo *ri)
|
|
{
|
|
return gt_tval_read(env, ri, GTIMER_VIRT);
|
|
}
|
|
|
|
static void gt_virt_tval_write(CPUARMState *env, const ARMCPRegInfo *ri,
|
|
uint64_t value)
|
|
{
|
|
gt_tval_write(env, ri, GTIMER_VIRT, value);
|
|
}
|
|
|
|
static void gt_virt_ctl_write(CPUARMState *env, const ARMCPRegInfo *ri,
|
|
uint64_t value)
|
|
{
|
|
gt_ctl_write(env, ri, GTIMER_VIRT, value);
|
|
}
|
|
|
|
static void gt_cntvoff_write(CPUARMState *env, const ARMCPRegInfo *ri,
|
|
uint64_t value)
|
|
{
|
|
ARMCPU *cpu = env_archcpu(env);
|
|
|
|
trace_arm_gt_cntvoff_write(value);
|
|
raw_write(env, ri, value);
|
|
gt_recalc_timer(cpu, GTIMER_VIRT);
|
|
}
|
|
|
|
static uint64_t gt_virt_redir_cval_read(CPUARMState *env,
|
|
const ARMCPRegInfo *ri)
|
|
{
|
|
int timeridx = gt_virt_redir_timeridx(env);
|
|
return env->cp15.c14_timer[timeridx].cval;
|
|
}
|
|
|
|
static void gt_virt_redir_cval_write(CPUARMState *env, const ARMCPRegInfo *ri,
|
|
uint64_t value)
|
|
{
|
|
int timeridx = gt_virt_redir_timeridx(env);
|
|
gt_cval_write(env, ri, timeridx, value);
|
|
}
|
|
|
|
static uint64_t gt_virt_redir_tval_read(CPUARMState *env,
|
|
const ARMCPRegInfo *ri)
|
|
{
|
|
int timeridx = gt_virt_redir_timeridx(env);
|
|
return gt_tval_read(env, ri, timeridx);
|
|
}
|
|
|
|
static void gt_virt_redir_tval_write(CPUARMState *env, const ARMCPRegInfo *ri,
|
|
uint64_t value)
|
|
{
|
|
int timeridx = gt_virt_redir_timeridx(env);
|
|
gt_tval_write(env, ri, timeridx, value);
|
|
}
|
|
|
|
static uint64_t gt_virt_redir_ctl_read(CPUARMState *env,
|
|
const ARMCPRegInfo *ri)
|
|
{
|
|
int timeridx = gt_virt_redir_timeridx(env);
|
|
return env->cp15.c14_timer[timeridx].ctl;
|
|
}
|
|
|
|
static void gt_virt_redir_ctl_write(CPUARMState *env, const ARMCPRegInfo *ri,
|
|
uint64_t value)
|
|
{
|
|
int timeridx = gt_virt_redir_timeridx(env);
|
|
gt_ctl_write(env, ri, timeridx, value);
|
|
}
|
|
|
|
static void gt_hyp_timer_reset(CPUARMState *env, const ARMCPRegInfo *ri)
|
|
{
|
|
gt_timer_reset(env, ri, GTIMER_HYP);
|
|
}
|
|
|
|
static void gt_hyp_cval_write(CPUARMState *env, const ARMCPRegInfo *ri,
|
|
uint64_t value)
|
|
{
|
|
gt_cval_write(env, ri, GTIMER_HYP, value);
|
|
}
|
|
|
|
static uint64_t gt_hyp_tval_read(CPUARMState *env, const ARMCPRegInfo *ri)
|
|
{
|
|
return gt_tval_read(env, ri, GTIMER_HYP);
|
|
}
|
|
|
|
static void gt_hyp_tval_write(CPUARMState *env, const ARMCPRegInfo *ri,
|
|
uint64_t value)
|
|
{
|
|
gt_tval_write(env, ri, GTIMER_HYP, value);
|
|
}
|
|
|
|
static void gt_hyp_ctl_write(CPUARMState *env, const ARMCPRegInfo *ri,
|
|
uint64_t value)
|
|
{
|
|
gt_ctl_write(env, ri, GTIMER_HYP, value);
|
|
}
|
|
|
|
static void gt_sec_timer_reset(CPUARMState *env, const ARMCPRegInfo *ri)
|
|
{
|
|
gt_timer_reset(env, ri, GTIMER_SEC);
|
|
}
|
|
|
|
static void gt_sec_cval_write(CPUARMState *env, const ARMCPRegInfo *ri,
|
|
uint64_t value)
|
|
{
|
|
gt_cval_write(env, ri, GTIMER_SEC, value);
|
|
}
|
|
|
|
static uint64_t gt_sec_tval_read(CPUARMState *env, const ARMCPRegInfo *ri)
|
|
{
|
|
return gt_tval_read(env, ri, GTIMER_SEC);
|
|
}
|
|
|
|
static void gt_sec_tval_write(CPUARMState *env, const ARMCPRegInfo *ri,
|
|
uint64_t value)
|
|
{
|
|
gt_tval_write(env, ri, GTIMER_SEC, value);
|
|
}
|
|
|
|
static void gt_sec_ctl_write(CPUARMState *env, const ARMCPRegInfo *ri,
|
|
uint64_t value)
|
|
{
|
|
gt_ctl_write(env, ri, GTIMER_SEC, value);
|
|
}
|
|
|
|
static void gt_hv_timer_reset(CPUARMState *env, const ARMCPRegInfo *ri)
|
|
{
|
|
gt_timer_reset(env, ri, GTIMER_HYPVIRT);
|
|
}
|
|
|
|
static void gt_hv_cval_write(CPUARMState *env, const ARMCPRegInfo *ri,
|
|
uint64_t value)
|
|
{
|
|
gt_cval_write(env, ri, GTIMER_HYPVIRT, value);
|
|
}
|
|
|
|
static uint64_t gt_hv_tval_read(CPUARMState *env, const ARMCPRegInfo *ri)
|
|
{
|
|
return gt_tval_read(env, ri, GTIMER_HYPVIRT);
|
|
}
|
|
|
|
static void gt_hv_tval_write(CPUARMState *env, const ARMCPRegInfo *ri,
|
|
uint64_t value)
|
|
{
|
|
gt_tval_write(env, ri, GTIMER_HYPVIRT, value);
|
|
}
|
|
|
|
static void gt_hv_ctl_write(CPUARMState *env, const ARMCPRegInfo *ri,
|
|
uint64_t value)
|
|
{
|
|
gt_ctl_write(env, ri, GTIMER_HYPVIRT, value);
|
|
}
|
|
|
|
void arm_gt_ptimer_cb(void *opaque)
|
|
{
|
|
ARMCPU *cpu = opaque;
|
|
|
|
gt_recalc_timer(cpu, GTIMER_PHYS);
|
|
}
|
|
|
|
void arm_gt_vtimer_cb(void *opaque)
|
|
{
|
|
ARMCPU *cpu = opaque;
|
|
|
|
gt_recalc_timer(cpu, GTIMER_VIRT);
|
|
}
|
|
|
|
void arm_gt_htimer_cb(void *opaque)
|
|
{
|
|
ARMCPU *cpu = opaque;
|
|
|
|
gt_recalc_timer(cpu, GTIMER_HYP);
|
|
}
|
|
|
|
void arm_gt_stimer_cb(void *opaque)
|
|
{
|
|
ARMCPU *cpu = opaque;
|
|
|
|
gt_recalc_timer(cpu, GTIMER_SEC);
|
|
}
|
|
|
|
void arm_gt_hvtimer_cb(void *opaque)
|
|
{
|
|
ARMCPU *cpu = opaque;
|
|
|
|
gt_recalc_timer(cpu, GTIMER_HYPVIRT);
|
|
}
|
|
|
|
static void arm_gt_cntfrq_reset(CPUARMState *env, const ARMCPRegInfo *opaque)
|
|
{
|
|
ARMCPU *cpu = env_archcpu(env);
|
|
|
|
cpu->env.cp15.c14_cntfrq = cpu->gt_cntfrq_hz;
|
|
}
|
|
|
|
static const ARMCPRegInfo generic_timer_cp_reginfo[] = {
|
|
/* Note that CNTFRQ is purely reads-as-written for the benefit
|
|
* of software; writing it doesn't actually change the timer frequency.
|
|
* Our reset value matches the fixed frequency we implement the timer at.
|
|
*/
|
|
{ .name = "CNTFRQ", .cp = 15, .crn = 14, .crm = 0, .opc1 = 0, .opc2 = 0,
|
|
.type = ARM_CP_ALIAS,
|
|
.access = PL1_RW | PL0_R, .accessfn = gt_cntfrq_access,
|
|
.fieldoffset = offsetoflow32(CPUARMState, cp15.c14_cntfrq),
|
|
},
|
|
{ .name = "CNTFRQ_EL0", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 3, .opc1 = 3, .crn = 14, .crm = 0, .opc2 = 0,
|
|
.access = PL1_RW | PL0_R, .accessfn = gt_cntfrq_access,
|
|
.fieldoffset = offsetof(CPUARMState, cp15.c14_cntfrq),
|
|
.resetfn = arm_gt_cntfrq_reset,
|
|
},
|
|
/* overall control: mostly access permissions */
|
|
{ .name = "CNTKCTL", .state = ARM_CP_STATE_BOTH,
|
|
.opc0 = 3, .opc1 = 0, .crn = 14, .crm = 1, .opc2 = 0,
|
|
.access = PL1_RW,
|
|
.fieldoffset = offsetof(CPUARMState, cp15.c14_cntkctl),
|
|
.resetvalue = 0,
|
|
},
|
|
/* per-timer control */
|
|
{ .name = "CNTP_CTL", .cp = 15, .crn = 14, .crm = 2, .opc1 = 0, .opc2 = 1,
|
|
.secure = ARM_CP_SECSTATE_NS,
|
|
.type = ARM_CP_IO | ARM_CP_ALIAS, .access = PL0_RW,
|
|
.accessfn = gt_ptimer_access,
|
|
.fieldoffset = offsetoflow32(CPUARMState,
|
|
cp15.c14_timer[GTIMER_PHYS].ctl),
|
|
.readfn = gt_phys_redir_ctl_read, .raw_readfn = raw_read,
|
|
.writefn = gt_phys_redir_ctl_write, .raw_writefn = raw_write,
|
|
},
|
|
{ .name = "CNTP_CTL_S",
|
|
.cp = 15, .crn = 14, .crm = 2, .opc1 = 0, .opc2 = 1,
|
|
.secure = ARM_CP_SECSTATE_S,
|
|
.type = ARM_CP_IO | ARM_CP_ALIAS, .access = PL0_RW,
|
|
.accessfn = gt_ptimer_access,
|
|
.fieldoffset = offsetoflow32(CPUARMState,
|
|
cp15.c14_timer[GTIMER_SEC].ctl),
|
|
.writefn = gt_sec_ctl_write, .raw_writefn = raw_write,
|
|
},
|
|
{ .name = "CNTP_CTL_EL0", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 3, .opc1 = 3, .crn = 14, .crm = 2, .opc2 = 1,
|
|
.type = ARM_CP_IO, .access = PL0_RW,
|
|
.accessfn = gt_ptimer_access,
|
|
.fieldoffset = offsetof(CPUARMState, cp15.c14_timer[GTIMER_PHYS].ctl),
|
|
.resetvalue = 0,
|
|
.readfn = gt_phys_redir_ctl_read, .raw_readfn = raw_read,
|
|
.writefn = gt_phys_redir_ctl_write, .raw_writefn = raw_write,
|
|
},
|
|
{ .name = "CNTV_CTL", .cp = 15, .crn = 14, .crm = 3, .opc1 = 0, .opc2 = 1,
|
|
.type = ARM_CP_IO | ARM_CP_ALIAS, .access = PL0_RW,
|
|
.accessfn = gt_vtimer_access,
|
|
.fieldoffset = offsetoflow32(CPUARMState,
|
|
cp15.c14_timer[GTIMER_VIRT].ctl),
|
|
.readfn = gt_virt_redir_ctl_read, .raw_readfn = raw_read,
|
|
.writefn = gt_virt_redir_ctl_write, .raw_writefn = raw_write,
|
|
},
|
|
{ .name = "CNTV_CTL_EL0", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 3, .opc1 = 3, .crn = 14, .crm = 3, .opc2 = 1,
|
|
.type = ARM_CP_IO, .access = PL0_RW,
|
|
.accessfn = gt_vtimer_access,
|
|
.fieldoffset = offsetof(CPUARMState, cp15.c14_timer[GTIMER_VIRT].ctl),
|
|
.resetvalue = 0,
|
|
.readfn = gt_virt_redir_ctl_read, .raw_readfn = raw_read,
|
|
.writefn = gt_virt_redir_ctl_write, .raw_writefn = raw_write,
|
|
},
|
|
/* TimerValue views: a 32 bit downcounting view of the underlying state */
|
|
{ .name = "CNTP_TVAL", .cp = 15, .crn = 14, .crm = 2, .opc1 = 0, .opc2 = 0,
|
|
.secure = ARM_CP_SECSTATE_NS,
|
|
.type = ARM_CP_NO_RAW | ARM_CP_IO, .access = PL0_RW,
|
|
.accessfn = gt_ptimer_access,
|
|
.readfn = gt_phys_redir_tval_read, .writefn = gt_phys_redir_tval_write,
|
|
},
|
|
{ .name = "CNTP_TVAL_S",
|
|
.cp = 15, .crn = 14, .crm = 2, .opc1 = 0, .opc2 = 0,
|
|
.secure = ARM_CP_SECSTATE_S,
|
|
.type = ARM_CP_NO_RAW | ARM_CP_IO, .access = PL0_RW,
|
|
.accessfn = gt_ptimer_access,
|
|
.readfn = gt_sec_tval_read, .writefn = gt_sec_tval_write,
|
|
},
|
|
{ .name = "CNTP_TVAL_EL0", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 3, .opc1 = 3, .crn = 14, .crm = 2, .opc2 = 0,
|
|
.type = ARM_CP_NO_RAW | ARM_CP_IO, .access = PL0_RW,
|
|
.accessfn = gt_ptimer_access, .resetfn = gt_phys_timer_reset,
|
|
.readfn = gt_phys_redir_tval_read, .writefn = gt_phys_redir_tval_write,
|
|
},
|
|
{ .name = "CNTV_TVAL", .cp = 15, .crn = 14, .crm = 3, .opc1 = 0, .opc2 = 0,
|
|
.type = ARM_CP_NO_RAW | ARM_CP_IO, .access = PL0_RW,
|
|
.accessfn = gt_vtimer_access,
|
|
.readfn = gt_virt_redir_tval_read, .writefn = gt_virt_redir_tval_write,
|
|
},
|
|
{ .name = "CNTV_TVAL_EL0", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 3, .opc1 = 3, .crn = 14, .crm = 3, .opc2 = 0,
|
|
.type = ARM_CP_NO_RAW | ARM_CP_IO, .access = PL0_RW,
|
|
.accessfn = gt_vtimer_access, .resetfn = gt_virt_timer_reset,
|
|
.readfn = gt_virt_redir_tval_read, .writefn = gt_virt_redir_tval_write,
|
|
},
|
|
/* The counter itself */
|
|
{ .name = "CNTPCT", .cp = 15, .crm = 14, .opc1 = 0,
|
|
.access = PL0_R, .type = ARM_CP_64BIT | ARM_CP_NO_RAW | ARM_CP_IO,
|
|
.accessfn = gt_pct_access,
|
|
.readfn = gt_cnt_read, .resetfn = arm_cp_reset_ignore,
|
|
},
|
|
{ .name = "CNTPCT_EL0", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 3, .opc1 = 3, .crn = 14, .crm = 0, .opc2 = 1,
|
|
.access = PL0_R, .type = ARM_CP_NO_RAW | ARM_CP_IO,
|
|
.accessfn = gt_pct_access, .readfn = gt_cnt_read,
|
|
},
|
|
{ .name = "CNTVCT", .cp = 15, .crm = 14, .opc1 = 1,
|
|
.access = PL0_R, .type = ARM_CP_64BIT | ARM_CP_NO_RAW | ARM_CP_IO,
|
|
.accessfn = gt_vct_access,
|
|
.readfn = gt_virt_cnt_read, .resetfn = arm_cp_reset_ignore,
|
|
},
|
|
{ .name = "CNTVCT_EL0", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 3, .opc1 = 3, .crn = 14, .crm = 0, .opc2 = 2,
|
|
.access = PL0_R, .type = ARM_CP_NO_RAW | ARM_CP_IO,
|
|
.accessfn = gt_vct_access, .readfn = gt_virt_cnt_read,
|
|
},
|
|
/* Comparison value, indicating when the timer goes off */
|
|
{ .name = "CNTP_CVAL", .cp = 15, .crm = 14, .opc1 = 2,
|
|
.secure = ARM_CP_SECSTATE_NS,
|
|
.access = PL0_RW,
|
|
.type = ARM_CP_64BIT | ARM_CP_IO | ARM_CP_ALIAS,
|
|
.fieldoffset = offsetof(CPUARMState, cp15.c14_timer[GTIMER_PHYS].cval),
|
|
.accessfn = gt_ptimer_access,
|
|
.readfn = gt_phys_redir_cval_read, .raw_readfn = raw_read,
|
|
.writefn = gt_phys_redir_cval_write, .raw_writefn = raw_write,
|
|
},
|
|
{ .name = "CNTP_CVAL_S", .cp = 15, .crm = 14, .opc1 = 2,
|
|
.secure = ARM_CP_SECSTATE_S,
|
|
.access = PL0_RW,
|
|
.type = ARM_CP_64BIT | ARM_CP_IO | ARM_CP_ALIAS,
|
|
.fieldoffset = offsetof(CPUARMState, cp15.c14_timer[GTIMER_SEC].cval),
|
|
.accessfn = gt_ptimer_access,
|
|
.writefn = gt_sec_cval_write, .raw_writefn = raw_write,
|
|
},
|
|
{ .name = "CNTP_CVAL_EL0", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 3, .opc1 = 3, .crn = 14, .crm = 2, .opc2 = 2,
|
|
.access = PL0_RW,
|
|
.type = ARM_CP_IO,
|
|
.fieldoffset = offsetof(CPUARMState, cp15.c14_timer[GTIMER_PHYS].cval),
|
|
.resetvalue = 0, .accessfn = gt_ptimer_access,
|
|
.readfn = gt_phys_redir_cval_read, .raw_readfn = raw_read,
|
|
.writefn = gt_phys_redir_cval_write, .raw_writefn = raw_write,
|
|
},
|
|
{ .name = "CNTV_CVAL", .cp = 15, .crm = 14, .opc1 = 3,
|
|
.access = PL0_RW,
|
|
.type = ARM_CP_64BIT | ARM_CP_IO | ARM_CP_ALIAS,
|
|
.fieldoffset = offsetof(CPUARMState, cp15.c14_timer[GTIMER_VIRT].cval),
|
|
.accessfn = gt_vtimer_access,
|
|
.readfn = gt_virt_redir_cval_read, .raw_readfn = raw_read,
|
|
.writefn = gt_virt_redir_cval_write, .raw_writefn = raw_write,
|
|
},
|
|
{ .name = "CNTV_CVAL_EL0", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 3, .opc1 = 3, .crn = 14, .crm = 3, .opc2 = 2,
|
|
.access = PL0_RW,
|
|
.type = ARM_CP_IO,
|
|
.fieldoffset = offsetof(CPUARMState, cp15.c14_timer[GTIMER_VIRT].cval),
|
|
.resetvalue = 0, .accessfn = gt_vtimer_access,
|
|
.readfn = gt_virt_redir_cval_read, .raw_readfn = raw_read,
|
|
.writefn = gt_virt_redir_cval_write, .raw_writefn = raw_write,
|
|
},
|
|
/* Secure timer -- this is actually restricted to only EL3
|
|
* and configurably Secure-EL1 via the accessfn.
|
|
*/
|
|
{ .name = "CNTPS_TVAL_EL1", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 3, .opc1 = 7, .crn = 14, .crm = 2, .opc2 = 0,
|
|
.type = ARM_CP_NO_RAW | ARM_CP_IO, .access = PL1_RW,
|
|
.accessfn = gt_stimer_access,
|
|
.readfn = gt_sec_tval_read,
|
|
.writefn = gt_sec_tval_write,
|
|
.resetfn = gt_sec_timer_reset,
|
|
},
|
|
{ .name = "CNTPS_CTL_EL1", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 3, .opc1 = 7, .crn = 14, .crm = 2, .opc2 = 1,
|
|
.type = ARM_CP_IO, .access = PL1_RW,
|
|
.accessfn = gt_stimer_access,
|
|
.fieldoffset = offsetof(CPUARMState, cp15.c14_timer[GTIMER_SEC].ctl),
|
|
.resetvalue = 0,
|
|
.writefn = gt_sec_ctl_write, .raw_writefn = raw_write,
|
|
},
|
|
{ .name = "CNTPS_CVAL_EL1", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 3, .opc1 = 7, .crn = 14, .crm = 2, .opc2 = 2,
|
|
.type = ARM_CP_IO, .access = PL1_RW,
|
|
.accessfn = gt_stimer_access,
|
|
.fieldoffset = offsetof(CPUARMState, cp15.c14_timer[GTIMER_SEC].cval),
|
|
.writefn = gt_sec_cval_write, .raw_writefn = raw_write,
|
|
},
|
|
REGINFO_SENTINEL
|
|
};
|
|
|
|
static CPAccessResult e2h_access(CPUARMState *env, const ARMCPRegInfo *ri,
|
|
bool isread)
|
|
{
|
|
if (!(arm_hcr_el2_eff(env) & HCR_E2H)) {
|
|
return CP_ACCESS_TRAP;
|
|
}
|
|
return CP_ACCESS_OK;
|
|
}
|
|
|
|
#else
|
|
|
|
/* In user-mode most of the generic timer registers are inaccessible
|
|
* however modern kernels (4.12+) allow access to cntvct_el0
|
|
*/
|
|
|
|
static uint64_t gt_virt_cnt_read(CPUARMState *env, const ARMCPRegInfo *ri)
|
|
{
|
|
ARMCPU *cpu = env_archcpu(env);
|
|
|
|
/* Currently we have no support for QEMUTimer in linux-user so we
|
|
* can't call gt_get_countervalue(env), instead we directly
|
|
* call the lower level functions.
|
|
*/
|
|
return cpu_get_clock() / gt_cntfrq_period_ns(cpu);
|
|
}
|
|
|
|
static const ARMCPRegInfo generic_timer_cp_reginfo[] = {
|
|
{ .name = "CNTFRQ_EL0", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 3, .opc1 = 3, .crn = 14, .crm = 0, .opc2 = 0,
|
|
.type = ARM_CP_CONST, .access = PL0_R /* no PL1_RW in linux-user */,
|
|
.fieldoffset = offsetof(CPUARMState, cp15.c14_cntfrq),
|
|
.resetvalue = NANOSECONDS_PER_SECOND / GTIMER_SCALE,
|
|
},
|
|
{ .name = "CNTVCT_EL0", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 3, .opc1 = 3, .crn = 14, .crm = 0, .opc2 = 2,
|
|
.access = PL0_R, .type = ARM_CP_NO_RAW | ARM_CP_IO,
|
|
.readfn = gt_virt_cnt_read,
|
|
},
|
|
REGINFO_SENTINEL
|
|
};
|
|
|
|
#endif
|
|
|
|
static void par_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t value)
|
|
{
|
|
if (arm_feature(env, ARM_FEATURE_LPAE)) {
|
|
raw_write(env, ri, value);
|
|
} else if (arm_feature(env, ARM_FEATURE_V7)) {
|
|
raw_write(env, ri, value & 0xfffff6ff);
|
|
} else {
|
|
raw_write(env, ri, value & 0xfffff1ff);
|
|
}
|
|
}
|
|
|
|
#ifndef CONFIG_USER_ONLY
|
|
/* get_phys_addr() isn't present for user-mode-only targets */
|
|
|
|
static CPAccessResult ats_access(CPUARMState *env, const ARMCPRegInfo *ri,
|
|
bool isread)
|
|
{
|
|
if (ri->opc2 & 4) {
|
|
/* The ATS12NSO* operations must trap to EL3 if executed in
|
|
* Secure EL1 (which can only happen if EL3 is AArch64).
|
|
* They are simply UNDEF if executed from NS EL1.
|
|
* They function normally from EL2 or EL3.
|
|
*/
|
|
if (arm_current_el(env) == 1) {
|
|
if (arm_is_secure_below_el3(env)) {
|
|
return CP_ACCESS_TRAP_UNCATEGORIZED_EL3;
|
|
}
|
|
return CP_ACCESS_TRAP_UNCATEGORIZED;
|
|
}
|
|
}
|
|
return CP_ACCESS_OK;
|
|
}
|
|
|
|
static uint64_t do_ats_write(CPUARMState *env, uint64_t value,
|
|
MMUAccessType access_type, ARMMMUIdx mmu_idx)
|
|
{
|
|
hwaddr phys_addr;
|
|
target_ulong page_size;
|
|
int prot;
|
|
bool ret;
|
|
uint64_t par64;
|
|
bool format64 = false;
|
|
MemTxAttrs attrs = {};
|
|
ARMMMUFaultInfo fi = {};
|
|
ARMCacheAttrs cacheattrs = {};
|
|
|
|
ret = get_phys_addr(env, value, access_type, mmu_idx, &phys_addr, &attrs,
|
|
&prot, &page_size, &fi, &cacheattrs);
|
|
|
|
if (ret) {
|
|
/*
|
|
* Some kinds of translation fault must cause exceptions rather
|
|
* than being reported in the PAR.
|
|
*/
|
|
int current_el = arm_current_el(env);
|
|
int target_el;
|
|
uint32_t syn, fsr, fsc;
|
|
bool take_exc = false;
|
|
|
|
if (fi.s1ptw && current_el == 1 && !arm_is_secure(env)
|
|
&& arm_mmu_idx_is_stage1_of_2(mmu_idx)) {
|
|
/*
|
|
* Synchronous stage 2 fault on an access made as part of the
|
|
* translation table walk for AT S1E0* or AT S1E1* insn
|
|
* executed from NS EL1. If this is a synchronous external abort
|
|
* and SCR_EL3.EA == 1, then we take a synchronous external abort
|
|
* to EL3. Otherwise the fault is taken as an exception to EL2,
|
|
* and HPFAR_EL2 holds the faulting IPA.
|
|
*/
|
|
if (fi.type == ARMFault_SyncExternalOnWalk &&
|
|
(env->cp15.scr_el3 & SCR_EA)) {
|
|
target_el = 3;
|
|
} else {
|
|
env->cp15.hpfar_el2 = extract64(fi.s2addr, 12, 47) << 4;
|
|
target_el = 2;
|
|
}
|
|
take_exc = true;
|
|
} else if (fi.type == ARMFault_SyncExternalOnWalk) {
|
|
/*
|
|
* Synchronous external aborts during a translation table walk
|
|
* are taken as Data Abort exceptions.
|
|
*/
|
|
if (fi.stage2) {
|
|
if (current_el == 3) {
|
|
target_el = 3;
|
|
} else {
|
|
target_el = 2;
|
|
}
|
|
} else {
|
|
target_el = exception_target_el(env);
|
|
}
|
|
take_exc = true;
|
|
}
|
|
|
|
if (take_exc) {
|
|
/* Construct FSR and FSC using same logic as arm_deliver_fault() */
|
|
if (target_el == 2 || arm_el_is_aa64(env, target_el) ||
|
|
arm_s1_regime_using_lpae_format(env, mmu_idx)) {
|
|
fsr = arm_fi_to_lfsc(&fi);
|
|
fsc = extract32(fsr, 0, 6);
|
|
} else {
|
|
fsr = arm_fi_to_sfsc(&fi);
|
|
fsc = 0x3f;
|
|
}
|
|
/*
|
|
* Report exception with ESR indicating a fault due to a
|
|
* translation table walk for a cache maintenance instruction.
|
|
*/
|
|
syn = syn_data_abort_no_iss(current_el == target_el,
|
|
fi.ea, 1, fi.s1ptw, 1, fsc);
|
|
env->exception.vaddress = value;
|
|
env->exception.fsr = fsr;
|
|
raise_exception(env, EXCP_DATA_ABORT, syn, target_el);
|
|
}
|
|
}
|
|
|
|
if (is_a64(env)) {
|
|
format64 = true;
|
|
} else if (arm_feature(env, ARM_FEATURE_LPAE)) {
|
|
/*
|
|
* ATS1Cxx:
|
|
* * TTBCR.EAE determines whether the result is returned using the
|
|
* 32-bit or the 64-bit PAR format
|
|
* * Instructions executed in Hyp mode always use the 64bit format
|
|
*
|
|
* ATS1S2NSOxx uses the 64bit format if any of the following is true:
|
|
* * The Non-secure TTBCR.EAE bit is set to 1
|
|
* * The implementation includes EL2, and the value of HCR.VM is 1
|
|
*
|
|
* (Note that HCR.DC makes HCR.VM behave as if it is 1.)
|
|
*
|
|
* ATS1Hx always uses the 64bit format.
|
|
*/
|
|
format64 = arm_s1_regime_using_lpae_format(env, mmu_idx);
|
|
|
|
if (arm_feature(env, ARM_FEATURE_EL2)) {
|
|
if (mmu_idx == ARMMMUIdx_E10_0 ||
|
|
mmu_idx == ARMMMUIdx_E10_1 ||
|
|
mmu_idx == ARMMMUIdx_E10_1_PAN) {
|
|
format64 |= env->cp15.hcr_el2 & (HCR_VM | HCR_DC);
|
|
} else {
|
|
format64 |= arm_current_el(env) == 2;
|
|
}
|
|
}
|
|
}
|
|
|
|
if (format64) {
|
|
/* Create a 64-bit PAR */
|
|
par64 = (1 << 11); /* LPAE bit always set */
|
|
if (!ret) {
|
|
par64 |= phys_addr & ~0xfffULL;
|
|
if (!attrs.secure) {
|
|
par64 |= (1 << 9); /* NS */
|
|
}
|
|
par64 |= (uint64_t)cacheattrs.attrs << 56; /* ATTR */
|
|
par64 |= cacheattrs.shareability << 7; /* SH */
|
|
} else {
|
|
uint32_t fsr = arm_fi_to_lfsc(&fi);
|
|
|
|
par64 |= 1; /* F */
|
|
par64 |= (fsr & 0x3f) << 1; /* FS */
|
|
if (fi.stage2) {
|
|
par64 |= (1 << 9); /* S */
|
|
}
|
|
if (fi.s1ptw) {
|
|
par64 |= (1 << 8); /* PTW */
|
|
}
|
|
}
|
|
} else {
|
|
/* fsr is a DFSR/IFSR value for the short descriptor
|
|
* translation table format (with WnR always clear).
|
|
* Convert it to a 32-bit PAR.
|
|
*/
|
|
if (!ret) {
|
|
/* We do not set any attribute bits in the PAR */
|
|
if (page_size == (1 << 24)
|
|
&& arm_feature(env, ARM_FEATURE_V7)) {
|
|
par64 = (phys_addr & 0xff000000) | (1 << 1);
|
|
} else {
|
|
par64 = phys_addr & 0xfffff000;
|
|
}
|
|
if (!attrs.secure) {
|
|
par64 |= (1 << 9); /* NS */
|
|
}
|
|
} else {
|
|
uint32_t fsr = arm_fi_to_sfsc(&fi);
|
|
|
|
par64 = ((fsr & (1 << 10)) >> 5) | ((fsr & (1 << 12)) >> 6) |
|
|
((fsr & 0xf) << 1) | 1;
|
|
}
|
|
}
|
|
return par64;
|
|
}
|
|
|
|
static void ats_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t value)
|
|
{
|
|
MMUAccessType access_type = ri->opc2 & 1 ? MMU_DATA_STORE : MMU_DATA_LOAD;
|
|
uint64_t par64;
|
|
ARMMMUIdx mmu_idx;
|
|
int el = arm_current_el(env);
|
|
bool secure = arm_is_secure_below_el3(env);
|
|
|
|
switch (ri->opc2 & 6) {
|
|
case 0:
|
|
/* stage 1 current state PL1: ATS1CPR, ATS1CPW, ATS1CPRP, ATS1CPWP */
|
|
switch (el) {
|
|
case 3:
|
|
mmu_idx = ARMMMUIdx_SE3;
|
|
break;
|
|
case 2:
|
|
g_assert(!secure); /* TODO: ARMv8.4-SecEL2 */
|
|
/* fall through */
|
|
case 1:
|
|
if (ri->crm == 9 && (env->uncached_cpsr & CPSR_PAN)) {
|
|
mmu_idx = (secure ? ARMMMUIdx_SE10_1_PAN
|
|
: ARMMMUIdx_Stage1_E1_PAN);
|
|
} else {
|
|
mmu_idx = secure ? ARMMMUIdx_SE10_1 : ARMMMUIdx_Stage1_E1;
|
|
}
|
|
break;
|
|
default:
|
|
g_assert_not_reached();
|
|
}
|
|
break;
|
|
case 2:
|
|
/* stage 1 current state PL0: ATS1CUR, ATS1CUW */
|
|
switch (el) {
|
|
case 3:
|
|
mmu_idx = ARMMMUIdx_SE10_0;
|
|
break;
|
|
case 2:
|
|
mmu_idx = ARMMMUIdx_Stage1_E0;
|
|
break;
|
|
case 1:
|
|
mmu_idx = secure ? ARMMMUIdx_SE10_0 : ARMMMUIdx_Stage1_E0;
|
|
break;
|
|
default:
|
|
g_assert_not_reached();
|
|
}
|
|
break;
|
|
case 4:
|
|
/* stage 1+2 NonSecure PL1: ATS12NSOPR, ATS12NSOPW */
|
|
mmu_idx = ARMMMUIdx_E10_1;
|
|
break;
|
|
case 6:
|
|
/* stage 1+2 NonSecure PL0: ATS12NSOUR, ATS12NSOUW */
|
|
mmu_idx = ARMMMUIdx_E10_0;
|
|
break;
|
|
default:
|
|
g_assert_not_reached();
|
|
}
|
|
|
|
par64 = do_ats_write(env, value, access_type, mmu_idx);
|
|
|
|
A32_BANKED_CURRENT_REG_SET(env, par, par64);
|
|
}
|
|
|
|
static void ats1h_write(CPUARMState *env, const ARMCPRegInfo *ri,
|
|
uint64_t value)
|
|
{
|
|
MMUAccessType access_type = ri->opc2 & 1 ? MMU_DATA_STORE : MMU_DATA_LOAD;
|
|
uint64_t par64;
|
|
|
|
par64 = do_ats_write(env, value, access_type, ARMMMUIdx_E2);
|
|
|
|
A32_BANKED_CURRENT_REG_SET(env, par, par64);
|
|
}
|
|
|
|
static CPAccessResult at_s1e2_access(CPUARMState *env, const ARMCPRegInfo *ri,
|
|
bool isread)
|
|
{
|
|
if (arm_current_el(env) == 3 && !(env->cp15.scr_el3 & SCR_NS)) {
|
|
return CP_ACCESS_TRAP;
|
|
}
|
|
return CP_ACCESS_OK;
|
|
}
|
|
|
|
static void ats_write64(CPUARMState *env, const ARMCPRegInfo *ri,
|
|
uint64_t value)
|
|
{
|
|
MMUAccessType access_type = ri->opc2 & 1 ? MMU_DATA_STORE : MMU_DATA_LOAD;
|
|
ARMMMUIdx mmu_idx;
|
|
int secure = arm_is_secure_below_el3(env);
|
|
|
|
switch (ri->opc2 & 6) {
|
|
case 0:
|
|
switch (ri->opc1) {
|
|
case 0: /* AT S1E1R, AT S1E1W, AT S1E1RP, AT S1E1WP */
|
|
if (ri->crm == 9 && (env->pstate & PSTATE_PAN)) {
|
|
mmu_idx = (secure ? ARMMMUIdx_SE10_1_PAN
|
|
: ARMMMUIdx_Stage1_E1_PAN);
|
|
} else {
|
|
mmu_idx = secure ? ARMMMUIdx_SE10_1 : ARMMMUIdx_Stage1_E1;
|
|
}
|
|
break;
|
|
case 4: /* AT S1E2R, AT S1E2W */
|
|
mmu_idx = ARMMMUIdx_E2;
|
|
break;
|
|
case 6: /* AT S1E3R, AT S1E3W */
|
|
mmu_idx = ARMMMUIdx_SE3;
|
|
break;
|
|
default:
|
|
g_assert_not_reached();
|
|
}
|
|
break;
|
|
case 2: /* AT S1E0R, AT S1E0W */
|
|
mmu_idx = secure ? ARMMMUIdx_SE10_0 : ARMMMUIdx_Stage1_E0;
|
|
break;
|
|
case 4: /* AT S12E1R, AT S12E1W */
|
|
mmu_idx = secure ? ARMMMUIdx_SE10_1 : ARMMMUIdx_E10_1;
|
|
break;
|
|
case 6: /* AT S12E0R, AT S12E0W */
|
|
mmu_idx = secure ? ARMMMUIdx_SE10_0 : ARMMMUIdx_E10_0;
|
|
break;
|
|
default:
|
|
g_assert_not_reached();
|
|
}
|
|
|
|
env->cp15.par_el[1] = do_ats_write(env, value, access_type, mmu_idx);
|
|
}
|
|
#endif
|
|
|
|
static const ARMCPRegInfo vapa_cp_reginfo[] = {
|
|
{ .name = "PAR", .cp = 15, .crn = 7, .crm = 4, .opc1 = 0, .opc2 = 0,
|
|
.access = PL1_RW, .resetvalue = 0,
|
|
.bank_fieldoffsets = { offsetoflow32(CPUARMState, cp15.par_s),
|
|
offsetoflow32(CPUARMState, cp15.par_ns) },
|
|
.writefn = par_write },
|
|
#ifndef CONFIG_USER_ONLY
|
|
/* This underdecoding is safe because the reginfo is NO_RAW. */
|
|
{ .name = "ATS", .cp = 15, .crn = 7, .crm = 8, .opc1 = 0, .opc2 = CP_ANY,
|
|
.access = PL1_W, .accessfn = ats_access,
|
|
.writefn = ats_write, .type = ARM_CP_NO_RAW | ARM_CP_RAISES_EXC },
|
|
#endif
|
|
REGINFO_SENTINEL
|
|
};
|
|
|
|
/* Return basic MPU access permission bits. */
|
|
static uint32_t simple_mpu_ap_bits(uint32_t val)
|
|
{
|
|
uint32_t ret;
|
|
uint32_t mask;
|
|
int i;
|
|
ret = 0;
|
|
mask = 3;
|
|
for (i = 0; i < 16; i += 2) {
|
|
ret |= (val >> i) & mask;
|
|
mask <<= 2;
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
/* Pad basic MPU access permission bits to extended format. */
|
|
static uint32_t extended_mpu_ap_bits(uint32_t val)
|
|
{
|
|
uint32_t ret;
|
|
uint32_t mask;
|
|
int i;
|
|
ret = 0;
|
|
mask = 3;
|
|
for (i = 0; i < 16; i += 2) {
|
|
ret |= (val & mask) << i;
|
|
mask <<= 2;
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
static void pmsav5_data_ap_write(CPUARMState *env, const ARMCPRegInfo *ri,
|
|
uint64_t value)
|
|
{
|
|
env->cp15.pmsav5_data_ap = extended_mpu_ap_bits(value);
|
|
}
|
|
|
|
static uint64_t pmsav5_data_ap_read(CPUARMState *env, const ARMCPRegInfo *ri)
|
|
{
|
|
return simple_mpu_ap_bits(env->cp15.pmsav5_data_ap);
|
|
}
|
|
|
|
static void pmsav5_insn_ap_write(CPUARMState *env, const ARMCPRegInfo *ri,
|
|
uint64_t value)
|
|
{
|
|
env->cp15.pmsav5_insn_ap = extended_mpu_ap_bits(value);
|
|
}
|
|
|
|
static uint64_t pmsav5_insn_ap_read(CPUARMState *env, const ARMCPRegInfo *ri)
|
|
{
|
|
return simple_mpu_ap_bits(env->cp15.pmsav5_insn_ap);
|
|
}
|
|
|
|
static uint64_t pmsav7_read(CPUARMState *env, const ARMCPRegInfo *ri)
|
|
{
|
|
uint32_t *u32p = *(uint32_t **)raw_ptr(env, ri);
|
|
|
|
if (!u32p) {
|
|
return 0;
|
|
}
|
|
|
|
u32p += env->pmsav7.rnr[M_REG_NS];
|
|
return *u32p;
|
|
}
|
|
|
|
static void pmsav7_write(CPUARMState *env, const ARMCPRegInfo *ri,
|
|
uint64_t value)
|
|
{
|
|
ARMCPU *cpu = env_archcpu(env);
|
|
uint32_t *u32p = *(uint32_t **)raw_ptr(env, ri);
|
|
|
|
if (!u32p) {
|
|
return;
|
|
}
|
|
|
|
u32p += env->pmsav7.rnr[M_REG_NS];
|
|
tlb_flush(CPU(cpu)); /* Mappings may have changed - purge! */
|
|
*u32p = value;
|
|
}
|
|
|
|
static void pmsav7_rgnr_write(CPUARMState *env, const ARMCPRegInfo *ri,
|
|
uint64_t value)
|
|
{
|
|
ARMCPU *cpu = env_archcpu(env);
|
|
uint32_t nrgs = cpu->pmsav7_dregion;
|
|
|
|
if (value >= nrgs) {
|
|
qemu_log_mask(LOG_GUEST_ERROR,
|
|
"PMSAv7 RGNR write >= # supported regions, %" PRIu32
|
|
" > %" PRIu32 "\n", (uint32_t)value, nrgs);
|
|
return;
|
|
}
|
|
|
|
raw_write(env, ri, value);
|
|
}
|
|
|
|
static const ARMCPRegInfo pmsav7_cp_reginfo[] = {
|
|
/* Reset for all these registers is handled in arm_cpu_reset(),
|
|
* because the PMSAv7 is also used by M-profile CPUs, which do
|
|
* not register cpregs but still need the state to be reset.
|
|
*/
|
|
{ .name = "DRBAR", .cp = 15, .crn = 6, .opc1 = 0, .crm = 1, .opc2 = 0,
|
|
.access = PL1_RW, .type = ARM_CP_NO_RAW,
|
|
.fieldoffset = offsetof(CPUARMState, pmsav7.drbar),
|
|
.readfn = pmsav7_read, .writefn = pmsav7_write,
|
|
.resetfn = arm_cp_reset_ignore },
|
|
{ .name = "DRSR", .cp = 15, .crn = 6, .opc1 = 0, .crm = 1, .opc2 = 2,
|
|
.access = PL1_RW, .type = ARM_CP_NO_RAW,
|
|
.fieldoffset = offsetof(CPUARMState, pmsav7.drsr),
|
|
.readfn = pmsav7_read, .writefn = pmsav7_write,
|
|
.resetfn = arm_cp_reset_ignore },
|
|
{ .name = "DRACR", .cp = 15, .crn = 6, .opc1 = 0, .crm = 1, .opc2 = 4,
|
|
.access = PL1_RW, .type = ARM_CP_NO_RAW,
|
|
.fieldoffset = offsetof(CPUARMState, pmsav7.dracr),
|
|
.readfn = pmsav7_read, .writefn = pmsav7_write,
|
|
.resetfn = arm_cp_reset_ignore },
|
|
{ .name = "RGNR", .cp = 15, .crn = 6, .opc1 = 0, .crm = 2, .opc2 = 0,
|
|
.access = PL1_RW,
|
|
.fieldoffset = offsetof(CPUARMState, pmsav7.rnr[M_REG_NS]),
|
|
.writefn = pmsav7_rgnr_write,
|
|
.resetfn = arm_cp_reset_ignore },
|
|
REGINFO_SENTINEL
|
|
};
|
|
|
|
static const ARMCPRegInfo pmsav5_cp_reginfo[] = {
|
|
{ .name = "DATA_AP", .cp = 15, .crn = 5, .crm = 0, .opc1 = 0, .opc2 = 0,
|
|
.access = PL1_RW, .type = ARM_CP_ALIAS,
|
|
.fieldoffset = offsetof(CPUARMState, cp15.pmsav5_data_ap),
|
|
.readfn = pmsav5_data_ap_read, .writefn = pmsav5_data_ap_write, },
|
|
{ .name = "INSN_AP", .cp = 15, .crn = 5, .crm = 0, .opc1 = 0, .opc2 = 1,
|
|
.access = PL1_RW, .type = ARM_CP_ALIAS,
|
|
.fieldoffset = offsetof(CPUARMState, cp15.pmsav5_insn_ap),
|
|
.readfn = pmsav5_insn_ap_read, .writefn = pmsav5_insn_ap_write, },
|
|
{ .name = "DATA_EXT_AP", .cp = 15, .crn = 5, .crm = 0, .opc1 = 0, .opc2 = 2,
|
|
.access = PL1_RW,
|
|
.fieldoffset = offsetof(CPUARMState, cp15.pmsav5_data_ap),
|
|
.resetvalue = 0, },
|
|
{ .name = "INSN_EXT_AP", .cp = 15, .crn = 5, .crm = 0, .opc1 = 0, .opc2 = 3,
|
|
.access = PL1_RW,
|
|
.fieldoffset = offsetof(CPUARMState, cp15.pmsav5_insn_ap),
|
|
.resetvalue = 0, },
|
|
{ .name = "DCACHE_CFG", .cp = 15, .crn = 2, .crm = 0, .opc1 = 0, .opc2 = 0,
|
|
.access = PL1_RW,
|
|
.fieldoffset = offsetof(CPUARMState, cp15.c2_data), .resetvalue = 0, },
|
|
{ .name = "ICACHE_CFG", .cp = 15, .crn = 2, .crm = 0, .opc1 = 0, .opc2 = 1,
|
|
.access = PL1_RW,
|
|
.fieldoffset = offsetof(CPUARMState, cp15.c2_insn), .resetvalue = 0, },
|
|
/* Protection region base and size registers */
|
|
{ .name = "946_PRBS0", .cp = 15, .crn = 6, .crm = 0, .opc1 = 0,
|
|
.opc2 = CP_ANY, .access = PL1_RW, .resetvalue = 0,
|
|
.fieldoffset = offsetof(CPUARMState, cp15.c6_region[0]) },
|
|
{ .name = "946_PRBS1", .cp = 15, .crn = 6, .crm = 1, .opc1 = 0,
|
|
.opc2 = CP_ANY, .access = PL1_RW, .resetvalue = 0,
|
|
.fieldoffset = offsetof(CPUARMState, cp15.c6_region[1]) },
|
|
{ .name = "946_PRBS2", .cp = 15, .crn = 6, .crm = 2, .opc1 = 0,
|
|
.opc2 = CP_ANY, .access = PL1_RW, .resetvalue = 0,
|
|
.fieldoffset = offsetof(CPUARMState, cp15.c6_region[2]) },
|
|
{ .name = "946_PRBS3", .cp = 15, .crn = 6, .crm = 3, .opc1 = 0,
|
|
.opc2 = CP_ANY, .access = PL1_RW, .resetvalue = 0,
|
|
.fieldoffset = offsetof(CPUARMState, cp15.c6_region[3]) },
|
|
{ .name = "946_PRBS4", .cp = 15, .crn = 6, .crm = 4, .opc1 = 0,
|
|
.opc2 = CP_ANY, .access = PL1_RW, .resetvalue = 0,
|
|
.fieldoffset = offsetof(CPUARMState, cp15.c6_region[4]) },
|
|
{ .name = "946_PRBS5", .cp = 15, .crn = 6, .crm = 5, .opc1 = 0,
|
|
.opc2 = CP_ANY, .access = PL1_RW, .resetvalue = 0,
|
|
.fieldoffset = offsetof(CPUARMState, cp15.c6_region[5]) },
|
|
{ .name = "946_PRBS6", .cp = 15, .crn = 6, .crm = 6, .opc1 = 0,
|
|
.opc2 = CP_ANY, .access = PL1_RW, .resetvalue = 0,
|
|
.fieldoffset = offsetof(CPUARMState, cp15.c6_region[6]) },
|
|
{ .name = "946_PRBS7", .cp = 15, .crn = 6, .crm = 7, .opc1 = 0,
|
|
.opc2 = CP_ANY, .access = PL1_RW, .resetvalue = 0,
|
|
.fieldoffset = offsetof(CPUARMState, cp15.c6_region[7]) },
|
|
REGINFO_SENTINEL
|
|
};
|
|
|
|
static void vmsa_ttbcr_raw_write(CPUARMState *env, const ARMCPRegInfo *ri,
|
|
uint64_t value)
|
|
{
|
|
TCR *tcr = raw_ptr(env, ri);
|
|
int maskshift = extract32(value, 0, 3);
|
|
|
|
if (!arm_feature(env, ARM_FEATURE_V8)) {
|
|
if (arm_feature(env, ARM_FEATURE_LPAE) && (value & TTBCR_EAE)) {
|
|
/* Pre ARMv8 bits [21:19], [15:14] and [6:3] are UNK/SBZP when
|
|
* using Long-desciptor translation table format */
|
|
value &= ~((7 << 19) | (3 << 14) | (0xf << 3));
|
|
} else if (arm_feature(env, ARM_FEATURE_EL3)) {
|
|
/* In an implementation that includes the Security Extensions
|
|
* TTBCR has additional fields PD0 [4] and PD1 [5] for
|
|
* Short-descriptor translation table format.
|
|
*/
|
|
value &= TTBCR_PD1 | TTBCR_PD0 | TTBCR_N;
|
|
} else {
|
|
value &= TTBCR_N;
|
|
}
|
|
}
|
|
|
|
/* Update the masks corresponding to the TCR bank being written
|
|
* Note that we always calculate mask and base_mask, but
|
|
* they are only used for short-descriptor tables (ie if EAE is 0);
|
|
* for long-descriptor tables the TCR fields are used differently
|
|
* and the mask and base_mask values are meaningless.
|
|
*/
|
|
tcr->raw_tcr = value;
|
|
tcr->mask = ~(((uint32_t)0xffffffffu) >> maskshift);
|
|
tcr->base_mask = ~((uint32_t)0x3fffu >> maskshift);
|
|
}
|
|
|
|
static void vmsa_ttbcr_write(CPUARMState *env, const ARMCPRegInfo *ri,
|
|
uint64_t value)
|
|
{
|
|
ARMCPU *cpu = env_archcpu(env);
|
|
TCR *tcr = raw_ptr(env, ri);
|
|
|
|
if (arm_feature(env, ARM_FEATURE_LPAE)) {
|
|
/* With LPAE the TTBCR could result in a change of ASID
|
|
* via the TTBCR.A1 bit, so do a TLB flush.
|
|
*/
|
|
tlb_flush(CPU(cpu));
|
|
}
|
|
/* Preserve the high half of TCR_EL1, set via TTBCR2. */
|
|
value = deposit64(tcr->raw_tcr, 0, 32, value);
|
|
vmsa_ttbcr_raw_write(env, ri, value);
|
|
}
|
|
|
|
static void vmsa_ttbcr_reset(CPUARMState *env, const ARMCPRegInfo *ri)
|
|
{
|
|
TCR *tcr = raw_ptr(env, ri);
|
|
|
|
/* Reset both the TCR as well as the masks corresponding to the bank of
|
|
* the TCR being reset.
|
|
*/
|
|
tcr->raw_tcr = 0;
|
|
tcr->mask = 0;
|
|
tcr->base_mask = 0xffffc000u;
|
|
}
|
|
|
|
static void vmsa_tcr_el12_write(CPUARMState *env, const ARMCPRegInfo *ri,
|
|
uint64_t value)
|
|
{
|
|
ARMCPU *cpu = env_archcpu(env);
|
|
TCR *tcr = raw_ptr(env, ri);
|
|
|
|
/* For AArch64 the A1 bit could result in a change of ASID, so TLB flush. */
|
|
tlb_flush(CPU(cpu));
|
|
tcr->raw_tcr = value;
|
|
}
|
|
|
|
static void vmsa_ttbr_write(CPUARMState *env, const ARMCPRegInfo *ri,
|
|
uint64_t value)
|
|
{
|
|
/* If the ASID changes (with a 64-bit write), we must flush the TLB. */
|
|
if (cpreg_field_is_64bit(ri) &&
|
|
extract64(raw_read(env, ri) ^ value, 48, 16) != 0) {
|
|
ARMCPU *cpu = env_archcpu(env);
|
|
tlb_flush(CPU(cpu));
|
|
}
|
|
raw_write(env, ri, value);
|
|
}
|
|
|
|
static void vmsa_tcr_ttbr_el2_write(CPUARMState *env, const ARMCPRegInfo *ri,
|
|
uint64_t value)
|
|
{
|
|
/*
|
|
* If we are running with E2&0 regime, then an ASID is active.
|
|
* Flush if that might be changing. Note we're not checking
|
|
* TCR_EL2.A1 to know if this is really the TTBRx_EL2 that
|
|
* holds the active ASID, only checking the field that might.
|
|
*/
|
|
if (extract64(raw_read(env, ri) ^ value, 48, 16) &&
|
|
(arm_hcr_el2_eff(env) & HCR_E2H)) {
|
|
tlb_flush_by_mmuidx(env_cpu(env),
|
|
ARMMMUIdxBit_E20_2 |
|
|
ARMMMUIdxBit_E20_2_PAN |
|
|
ARMMMUIdxBit_E20_0);
|
|
}
|
|
raw_write(env, ri, value);
|
|
}
|
|
|
|
static void vttbr_write(CPUARMState *env, const ARMCPRegInfo *ri,
|
|
uint64_t value)
|
|
{
|
|
ARMCPU *cpu = env_archcpu(env);
|
|
CPUState *cs = CPU(cpu);
|
|
|
|
/*
|
|
* A change in VMID to the stage2 page table (Stage2) invalidates
|
|
* the combined stage 1&2 tlbs (EL10_1 and EL10_0).
|
|
*/
|
|
if (raw_read(env, ri) != value) {
|
|
tlb_flush_by_mmuidx(cs,
|
|
ARMMMUIdxBit_E10_1 |
|
|
ARMMMUIdxBit_E10_1_PAN |
|
|
ARMMMUIdxBit_E10_0 |
|
|
ARMMMUIdxBit_Stage2);
|
|
raw_write(env, ri, value);
|
|
}
|
|
}
|
|
|
|
static const ARMCPRegInfo vmsa_pmsa_cp_reginfo[] = {
|
|
{ .name = "DFSR", .cp = 15, .crn = 5, .crm = 0, .opc1 = 0, .opc2 = 0,
|
|
.access = PL1_RW, .type = ARM_CP_ALIAS,
|
|
.bank_fieldoffsets = { offsetoflow32(CPUARMState, cp15.dfsr_s),
|
|
offsetoflow32(CPUARMState, cp15.dfsr_ns) }, },
|
|
{ .name = "IFSR", .cp = 15, .crn = 5, .crm = 0, .opc1 = 0, .opc2 = 1,
|
|
.access = PL1_RW, .resetvalue = 0,
|
|
.bank_fieldoffsets = { offsetoflow32(CPUARMState, cp15.ifsr_s),
|
|
offsetoflow32(CPUARMState, cp15.ifsr_ns) } },
|
|
{ .name = "DFAR", .cp = 15, .opc1 = 0, .crn = 6, .crm = 0, .opc2 = 0,
|
|
.access = PL1_RW, .resetvalue = 0,
|
|
.bank_fieldoffsets = { offsetof(CPUARMState, cp15.dfar_s),
|
|
offsetof(CPUARMState, cp15.dfar_ns) } },
|
|
{ .name = "FAR_EL1", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 3, .crn = 6, .crm = 0, .opc1 = 0, .opc2 = 0,
|
|
.access = PL1_RW, .fieldoffset = offsetof(CPUARMState, cp15.far_el[1]),
|
|
.resetvalue = 0, },
|
|
REGINFO_SENTINEL
|
|
};
|
|
|
|
static const ARMCPRegInfo vmsa_cp_reginfo[] = {
|
|
{ .name = "ESR_EL1", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 3, .crn = 5, .crm = 2, .opc1 = 0, .opc2 = 0,
|
|
.access = PL1_RW,
|
|
.fieldoffset = offsetof(CPUARMState, cp15.esr_el[1]), .resetvalue = 0, },
|
|
{ .name = "TTBR0_EL1", .state = ARM_CP_STATE_BOTH,
|
|
.opc0 = 3, .opc1 = 0, .crn = 2, .crm = 0, .opc2 = 0,
|
|
.access = PL1_RW, .writefn = vmsa_ttbr_write, .resetvalue = 0,
|
|
.bank_fieldoffsets = { offsetof(CPUARMState, cp15.ttbr0_s),
|
|
offsetof(CPUARMState, cp15.ttbr0_ns) } },
|
|
{ .name = "TTBR1_EL1", .state = ARM_CP_STATE_BOTH,
|
|
.opc0 = 3, .opc1 = 0, .crn = 2, .crm = 0, .opc2 = 1,
|
|
.access = PL1_RW, .writefn = vmsa_ttbr_write, .resetvalue = 0,
|
|
.bank_fieldoffsets = { offsetof(CPUARMState, cp15.ttbr1_s),
|
|
offsetof(CPUARMState, cp15.ttbr1_ns) } },
|
|
{ .name = "TCR_EL1", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 3, .crn = 2, .crm = 0, .opc1 = 0, .opc2 = 2,
|
|
.access = PL1_RW, .writefn = vmsa_tcr_el12_write,
|
|
.resetfn = vmsa_ttbcr_reset, .raw_writefn = raw_write,
|
|
.fieldoffset = offsetof(CPUARMState, cp15.tcr_el[1]) },
|
|
{ .name = "TTBCR", .cp = 15, .crn = 2, .crm = 0, .opc1 = 0, .opc2 = 2,
|
|
.access = PL1_RW, .type = ARM_CP_ALIAS, .writefn = vmsa_ttbcr_write,
|
|
.raw_writefn = vmsa_ttbcr_raw_write,
|
|
.bank_fieldoffsets = { offsetoflow32(CPUARMState, cp15.tcr_el[3]),
|
|
offsetoflow32(CPUARMState, cp15.tcr_el[1])} },
|
|
REGINFO_SENTINEL
|
|
};
|
|
|
|
/* Note that unlike TTBCR, writing to TTBCR2 does not require flushing
|
|
* qemu tlbs nor adjusting cached masks.
|
|
*/
|
|
static const ARMCPRegInfo ttbcr2_reginfo = {
|
|
.name = "TTBCR2", .cp = 15, .opc1 = 0, .crn = 2, .crm = 0, .opc2 = 3,
|
|
.access = PL1_RW, .type = ARM_CP_ALIAS,
|
|
.bank_fieldoffsets = { offsetofhigh32(CPUARMState, cp15.tcr_el[3]),
|
|
offsetofhigh32(CPUARMState, cp15.tcr_el[1]) },
|
|
};
|
|
|
|
static void omap_ticonfig_write(CPUARMState *env, const ARMCPRegInfo *ri,
|
|
uint64_t value)
|
|
{
|
|
env->cp15.c15_ticonfig = value & 0xe7;
|
|
/* The OS_TYPE bit in this register changes the reported CPUID! */
|
|
env->cp15.c0_cpuid = (value & (1 << 5)) ?
|
|
ARM_CPUID_TI915T : ARM_CPUID_TI925T;
|
|
}
|
|
|
|
static void omap_threadid_write(CPUARMState *env, const ARMCPRegInfo *ri,
|
|
uint64_t value)
|
|
{
|
|
env->cp15.c15_threadid = value & 0xffff;
|
|
}
|
|
|
|
static void omap_wfi_write(CPUARMState *env, const ARMCPRegInfo *ri,
|
|
uint64_t value)
|
|
{
|
|
/* Wait-for-interrupt (deprecated) */
|
|
cpu_interrupt(env_cpu(env), CPU_INTERRUPT_HALT);
|
|
}
|
|
|
|
static void omap_cachemaint_write(CPUARMState *env, const ARMCPRegInfo *ri,
|
|
uint64_t value)
|
|
{
|
|
/* On OMAP there are registers indicating the max/min index of dcache lines
|
|
* containing a dirty line; cache flush operations have to reset these.
|
|
*/
|
|
env->cp15.c15_i_max = 0x000;
|
|
env->cp15.c15_i_min = 0xff0;
|
|
}
|
|
|
|
static const ARMCPRegInfo omap_cp_reginfo[] = {
|
|
{ .name = "DFSR", .cp = 15, .crn = 5, .crm = CP_ANY,
|
|
.opc1 = CP_ANY, .opc2 = CP_ANY, .access = PL1_RW, .type = ARM_CP_OVERRIDE,
|
|
.fieldoffset = offsetoflow32(CPUARMState, cp15.esr_el[1]),
|
|
.resetvalue = 0, },
|
|
{ .name = "", .cp = 15, .crn = 15, .crm = 0, .opc1 = 0, .opc2 = 0,
|
|
.access = PL1_RW, .type = ARM_CP_NOP },
|
|
{ .name = "TICONFIG", .cp = 15, .crn = 15, .crm = 1, .opc1 = 0, .opc2 = 0,
|
|
.access = PL1_RW,
|
|
.fieldoffset = offsetof(CPUARMState, cp15.c15_ticonfig), .resetvalue = 0,
|
|
.writefn = omap_ticonfig_write },
|
|
{ .name = "IMAX", .cp = 15, .crn = 15, .crm = 2, .opc1 = 0, .opc2 = 0,
|
|
.access = PL1_RW,
|
|
.fieldoffset = offsetof(CPUARMState, cp15.c15_i_max), .resetvalue = 0, },
|
|
{ .name = "IMIN", .cp = 15, .crn = 15, .crm = 3, .opc1 = 0, .opc2 = 0,
|
|
.access = PL1_RW, .resetvalue = 0xff0,
|
|
.fieldoffset = offsetof(CPUARMState, cp15.c15_i_min) },
|
|
{ .name = "THREADID", .cp = 15, .crn = 15, .crm = 4, .opc1 = 0, .opc2 = 0,
|
|
.access = PL1_RW,
|
|
.fieldoffset = offsetof(CPUARMState, cp15.c15_threadid), .resetvalue = 0,
|
|
.writefn = omap_threadid_write },
|
|
{ .name = "TI925T_STATUS", .cp = 15, .crn = 15,
|
|
.crm = 8, .opc1 = 0, .opc2 = 0, .access = PL1_RW,
|
|
.type = ARM_CP_NO_RAW,
|
|
.readfn = arm_cp_read_zero, .writefn = omap_wfi_write, },
|
|
/* TODO: Peripheral port remap register:
|
|
* On OMAP2 mcr p15, 0, rn, c15, c2, 4 sets up the interrupt controller
|
|
* base address at $rn & ~0xfff and map size of 0x200 << ($rn & 0xfff),
|
|
* when MMU is off.
|
|
*/
|
|
{ .name = "OMAP_CACHEMAINT", .cp = 15, .crn = 7, .crm = CP_ANY,
|
|
.opc1 = 0, .opc2 = CP_ANY, .access = PL1_W,
|
|
.type = ARM_CP_OVERRIDE | ARM_CP_NO_RAW,
|
|
.writefn = omap_cachemaint_write },
|
|
{ .name = "C9", .cp = 15, .crn = 9,
|
|
.crm = CP_ANY, .opc1 = CP_ANY, .opc2 = CP_ANY, .access = PL1_RW,
|
|
.type = ARM_CP_CONST | ARM_CP_OVERRIDE, .resetvalue = 0 },
|
|
REGINFO_SENTINEL
|
|
};
|
|
|
|
static void xscale_cpar_write(CPUARMState *env, const ARMCPRegInfo *ri,
|
|
uint64_t value)
|
|
{
|
|
env->cp15.c15_cpar = value & 0x3fff;
|
|
}
|
|
|
|
static const ARMCPRegInfo xscale_cp_reginfo[] = {
|
|
{ .name = "XSCALE_CPAR",
|
|
.cp = 15, .crn = 15, .crm = 1, .opc1 = 0, .opc2 = 0, .access = PL1_RW,
|
|
.fieldoffset = offsetof(CPUARMState, cp15.c15_cpar), .resetvalue = 0,
|
|
.writefn = xscale_cpar_write, },
|
|
{ .name = "XSCALE_AUXCR",
|
|
.cp = 15, .crn = 1, .crm = 0, .opc1 = 0, .opc2 = 1, .access = PL1_RW,
|
|
.fieldoffset = offsetof(CPUARMState, cp15.c1_xscaleauxcr),
|
|
.resetvalue = 0, },
|
|
/* XScale specific cache-lockdown: since we have no cache we NOP these
|
|
* and hope the guest does not really rely on cache behaviour.
|
|
*/
|
|
{ .name = "XSCALE_LOCK_ICACHE_LINE",
|
|
.cp = 15, .opc1 = 0, .crn = 9, .crm = 1, .opc2 = 0,
|
|
.access = PL1_W, .type = ARM_CP_NOP },
|
|
{ .name = "XSCALE_UNLOCK_ICACHE",
|
|
.cp = 15, .opc1 = 0, .crn = 9, .crm = 1, .opc2 = 1,
|
|
.access = PL1_W, .type = ARM_CP_NOP },
|
|
{ .name = "XSCALE_DCACHE_LOCK",
|
|
.cp = 15, .opc1 = 0, .crn = 9, .crm = 2, .opc2 = 0,
|
|
.access = PL1_RW, .type = ARM_CP_NOP },
|
|
{ .name = "XSCALE_UNLOCK_DCACHE",
|
|
.cp = 15, .opc1 = 0, .crn = 9, .crm = 2, .opc2 = 1,
|
|
.access = PL1_W, .type = ARM_CP_NOP },
|
|
REGINFO_SENTINEL
|
|
};
|
|
|
|
static const ARMCPRegInfo dummy_c15_cp_reginfo[] = {
|
|
/* RAZ/WI the whole crn=15 space, when we don't have a more specific
|
|
* implementation of this implementation-defined space.
|
|
* Ideally this should eventually disappear in favour of actually
|
|
* implementing the correct behaviour for all cores.
|
|
*/
|
|
{ .name = "C15_IMPDEF", .cp = 15, .crn = 15,
|
|
.crm = CP_ANY, .opc1 = CP_ANY, .opc2 = CP_ANY,
|
|
.access = PL1_RW,
|
|
.type = ARM_CP_CONST | ARM_CP_NO_RAW | ARM_CP_OVERRIDE,
|
|
.resetvalue = 0 },
|
|
REGINFO_SENTINEL
|
|
};
|
|
|
|
static const ARMCPRegInfo cache_dirty_status_cp_reginfo[] = {
|
|
/* Cache status: RAZ because we have no cache so it's always clean */
|
|
{ .name = "CDSR", .cp = 15, .crn = 7, .crm = 10, .opc1 = 0, .opc2 = 6,
|
|
.access = PL1_R, .type = ARM_CP_CONST | ARM_CP_NO_RAW,
|
|
.resetvalue = 0 },
|
|
REGINFO_SENTINEL
|
|
};
|
|
|
|
static const ARMCPRegInfo cache_block_ops_cp_reginfo[] = {
|
|
/* We never have a a block transfer operation in progress */
|
|
{ .name = "BXSR", .cp = 15, .crn = 7, .crm = 12, .opc1 = 0, .opc2 = 4,
|
|
.access = PL0_R, .type = ARM_CP_CONST | ARM_CP_NO_RAW,
|
|
.resetvalue = 0 },
|
|
/* The cache ops themselves: these all NOP for QEMU */
|
|
{ .name = "IICR", .cp = 15, .crm = 5, .opc1 = 0,
|
|
.access = PL1_W, .type = ARM_CP_NOP|ARM_CP_64BIT },
|
|
{ .name = "IDCR", .cp = 15, .crm = 6, .opc1 = 0,
|
|
.access = PL1_W, .type = ARM_CP_NOP|ARM_CP_64BIT },
|
|
{ .name = "CDCR", .cp = 15, .crm = 12, .opc1 = 0,
|
|
.access = PL0_W, .type = ARM_CP_NOP|ARM_CP_64BIT },
|
|
{ .name = "PIR", .cp = 15, .crm = 12, .opc1 = 1,
|
|
.access = PL0_W, .type = ARM_CP_NOP|ARM_CP_64BIT },
|
|
{ .name = "PDR", .cp = 15, .crm = 12, .opc1 = 2,
|
|
.access = PL0_W, .type = ARM_CP_NOP|ARM_CP_64BIT },
|
|
{ .name = "CIDCR", .cp = 15, .crm = 14, .opc1 = 0,
|
|
.access = PL1_W, .type = ARM_CP_NOP|ARM_CP_64BIT },
|
|
REGINFO_SENTINEL
|
|
};
|
|
|
|
static const ARMCPRegInfo cache_test_clean_cp_reginfo[] = {
|
|
/* The cache test-and-clean instructions always return (1 << 30)
|
|
* to indicate that there are no dirty cache lines.
|
|
*/
|
|
{ .name = "TC_DCACHE", .cp = 15, .crn = 7, .crm = 10, .opc1 = 0, .opc2 = 3,
|
|
.access = PL0_R, .type = ARM_CP_CONST | ARM_CP_NO_RAW,
|
|
.resetvalue = (1 << 30) },
|
|
{ .name = "TCI_DCACHE", .cp = 15, .crn = 7, .crm = 14, .opc1 = 0, .opc2 = 3,
|
|
.access = PL0_R, .type = ARM_CP_CONST | ARM_CP_NO_RAW,
|
|
.resetvalue = (1 << 30) },
|
|
REGINFO_SENTINEL
|
|
};
|
|
|
|
static const ARMCPRegInfo strongarm_cp_reginfo[] = {
|
|
/* Ignore ReadBuffer accesses */
|
|
{ .name = "C9_READBUFFER", .cp = 15, .crn = 9,
|
|
.crm = CP_ANY, .opc1 = CP_ANY, .opc2 = CP_ANY,
|
|
.access = PL1_RW, .resetvalue = 0,
|
|
.type = ARM_CP_CONST | ARM_CP_OVERRIDE | ARM_CP_NO_RAW },
|
|
REGINFO_SENTINEL
|
|
};
|
|
|
|
static uint64_t midr_read(CPUARMState *env, const ARMCPRegInfo *ri)
|
|
{
|
|
ARMCPU *cpu = env_archcpu(env);
|
|
unsigned int cur_el = arm_current_el(env);
|
|
bool secure = arm_is_secure(env);
|
|
|
|
if (arm_feature(&cpu->env, ARM_FEATURE_EL2) && !secure && cur_el == 1) {
|
|
return env->cp15.vpidr_el2;
|
|
}
|
|
return raw_read(env, ri);
|
|
}
|
|
|
|
static uint64_t mpidr_read_val(CPUARMState *env)
|
|
{
|
|
ARMCPU *cpu = env_archcpu(env);
|
|
uint64_t mpidr = cpu->mp_affinity;
|
|
|
|
if (arm_feature(env, ARM_FEATURE_V7MP)) {
|
|
mpidr |= (1U << 31);
|
|
/* Cores which are uniprocessor (non-coherent)
|
|
* but still implement the MP extensions set
|
|
* bit 30. (For instance, Cortex-R5).
|
|
*/
|
|
if (cpu->mp_is_up) {
|
|
mpidr |= (1u << 30);
|
|
}
|
|
}
|
|
return mpidr;
|
|
}
|
|
|
|
static uint64_t mpidr_read(CPUARMState *env, const ARMCPRegInfo *ri)
|
|
{
|
|
unsigned int cur_el = arm_current_el(env);
|
|
bool secure = arm_is_secure(env);
|
|
|
|
if (arm_feature(env, ARM_FEATURE_EL2) && !secure && cur_el == 1) {
|
|
return env->cp15.vmpidr_el2;
|
|
}
|
|
return mpidr_read_val(env);
|
|
}
|
|
|
|
static const ARMCPRegInfo lpae_cp_reginfo[] = {
|
|
/* NOP AMAIR0/1 */
|
|
{ .name = "AMAIR0", .state = ARM_CP_STATE_BOTH,
|
|
.opc0 = 3, .crn = 10, .crm = 3, .opc1 = 0, .opc2 = 0,
|
|
.access = PL1_RW, .type = ARM_CP_CONST,
|
|
.resetvalue = 0 },
|
|
/* AMAIR1 is mapped to AMAIR_EL1[63:32] */
|
|
{ .name = "AMAIR1", .cp = 15, .crn = 10, .crm = 3, .opc1 = 0, .opc2 = 1,
|
|
.access = PL1_RW, .type = ARM_CP_CONST,
|
|
.resetvalue = 0 },
|
|
{ .name = "PAR", .cp = 15, .crm = 7, .opc1 = 0,
|
|
.access = PL1_RW, .type = ARM_CP_64BIT, .resetvalue = 0,
|
|
.bank_fieldoffsets = { offsetof(CPUARMState, cp15.par_s),
|
|
offsetof(CPUARMState, cp15.par_ns)} },
|
|
{ .name = "TTBR0", .cp = 15, .crm = 2, .opc1 = 0,
|
|
.access = PL1_RW, .type = ARM_CP_64BIT | ARM_CP_ALIAS,
|
|
.bank_fieldoffsets = { offsetof(CPUARMState, cp15.ttbr0_s),
|
|
offsetof(CPUARMState, cp15.ttbr0_ns) },
|
|
.writefn = vmsa_ttbr_write, },
|
|
{ .name = "TTBR1", .cp = 15, .crm = 2, .opc1 = 1,
|
|
.access = PL1_RW, .type = ARM_CP_64BIT | ARM_CP_ALIAS,
|
|
.bank_fieldoffsets = { offsetof(CPUARMState, cp15.ttbr1_s),
|
|
offsetof(CPUARMState, cp15.ttbr1_ns) },
|
|
.writefn = vmsa_ttbr_write, },
|
|
REGINFO_SENTINEL
|
|
};
|
|
|
|
static uint64_t aa64_fpcr_read(CPUARMState *env, const ARMCPRegInfo *ri)
|
|
{
|
|
return vfp_get_fpcr(env);
|
|
}
|
|
|
|
static void aa64_fpcr_write(CPUARMState *env, const ARMCPRegInfo *ri,
|
|
uint64_t value)
|
|
{
|
|
vfp_set_fpcr(env, value);
|
|
}
|
|
|
|
static uint64_t aa64_fpsr_read(CPUARMState *env, const ARMCPRegInfo *ri)
|
|
{
|
|
return vfp_get_fpsr(env);
|
|
}
|
|
|
|
static void aa64_fpsr_write(CPUARMState *env, const ARMCPRegInfo *ri,
|
|
uint64_t value)
|
|
{
|
|
vfp_set_fpsr(env, value);
|
|
}
|
|
|
|
static CPAccessResult aa64_daif_access(CPUARMState *env, const ARMCPRegInfo *ri,
|
|
bool isread)
|
|
{
|
|
if (arm_current_el(env) == 0 && !(arm_sctlr(env, 0) & SCTLR_UMA)) {
|
|
return CP_ACCESS_TRAP;
|
|
}
|
|
return CP_ACCESS_OK;
|
|
}
|
|
|
|
static void aa64_daif_write(CPUARMState *env, const ARMCPRegInfo *ri,
|
|
uint64_t value)
|
|
{
|
|
env->daif = value & PSTATE_DAIF;
|
|
}
|
|
|
|
static uint64_t aa64_pan_read(CPUARMState *env, const ARMCPRegInfo *ri)
|
|
{
|
|
return env->pstate & PSTATE_PAN;
|
|
}
|
|
|
|
static void aa64_pan_write(CPUARMState *env, const ARMCPRegInfo *ri,
|
|
uint64_t value)
|
|
{
|
|
env->pstate = (env->pstate & ~PSTATE_PAN) | (value & PSTATE_PAN);
|
|
}
|
|
|
|
static const ARMCPRegInfo pan_reginfo = {
|
|
.name = "PAN", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 3, .opc1 = 0, .crn = 4, .crm = 2, .opc2 = 3,
|
|
.type = ARM_CP_NO_RAW, .access = PL1_RW,
|
|
.readfn = aa64_pan_read, .writefn = aa64_pan_write
|
|
};
|
|
|
|
static uint64_t aa64_uao_read(CPUARMState *env, const ARMCPRegInfo *ri)
|
|
{
|
|
return env->pstate & PSTATE_UAO;
|
|
}
|
|
|
|
static void aa64_uao_write(CPUARMState *env, const ARMCPRegInfo *ri,
|
|
uint64_t value)
|
|
{
|
|
env->pstate = (env->pstate & ~PSTATE_UAO) | (value & PSTATE_UAO);
|
|
}
|
|
|
|
static const ARMCPRegInfo uao_reginfo = {
|
|
.name = "UAO", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 3, .opc1 = 0, .crn = 4, .crm = 2, .opc2 = 4,
|
|
.type = ARM_CP_NO_RAW, .access = PL1_RW,
|
|
.readfn = aa64_uao_read, .writefn = aa64_uao_write
|
|
};
|
|
|
|
static CPAccessResult aa64_cacheop_access(CPUARMState *env,
|
|
const ARMCPRegInfo *ri,
|
|
bool isread)
|
|
{
|
|
/* Cache invalidate/clean: NOP, but EL0 must UNDEF unless
|
|
* SCTLR_EL1.UCI is set.
|
|
*/
|
|
if (arm_current_el(env) == 0 && !(arm_sctlr(env, 0) & SCTLR_UCI)) {
|
|
return CP_ACCESS_TRAP;
|
|
}
|
|
return CP_ACCESS_OK;
|
|
}
|
|
|
|
/* See: D4.7.2 TLB maintenance requirements and the TLB maintenance instructions
|
|
* Page D4-1736 (DDI0487A.b)
|
|
*/
|
|
|
|
static int vae1_tlbmask(CPUARMState *env)
|
|
{
|
|
/* Since we exclude secure first, we may read HCR_EL2 directly. */
|
|
if (arm_is_secure_below_el3(env)) {
|
|
return ARMMMUIdxBit_SE10_1 |
|
|
ARMMMUIdxBit_SE10_1_PAN |
|
|
ARMMMUIdxBit_SE10_0;
|
|
} else if ((env->cp15.hcr_el2 & (HCR_E2H | HCR_TGE))
|
|
== (HCR_E2H | HCR_TGE)) {
|
|
return ARMMMUIdxBit_E20_2 |
|
|
ARMMMUIdxBit_E20_2_PAN |
|
|
ARMMMUIdxBit_E20_0;
|
|
} else {
|
|
return ARMMMUIdxBit_E10_1 |
|
|
ARMMMUIdxBit_E10_1_PAN |
|
|
ARMMMUIdxBit_E10_0;
|
|
}
|
|
}
|
|
|
|
static void tlbi_aa64_vmalle1is_write(CPUARMState *env, const ARMCPRegInfo *ri,
|
|
uint64_t value)
|
|
{
|
|
CPUState *cs = env_cpu(env);
|
|
int mask = vae1_tlbmask(env);
|
|
|
|
tlb_flush_by_mmuidx_all_cpus_synced(cs, mask);
|
|
}
|
|
|
|
static void tlbi_aa64_vmalle1_write(CPUARMState *env, const ARMCPRegInfo *ri,
|
|
uint64_t value)
|
|
{
|
|
CPUState *cs = env_cpu(env);
|
|
int mask = vae1_tlbmask(env);
|
|
|
|
if (tlb_force_broadcast(env)) {
|
|
tlb_flush_by_mmuidx_all_cpus_synced(cs, mask);
|
|
} else {
|
|
tlb_flush_by_mmuidx(cs, mask);
|
|
}
|
|
}
|
|
|
|
static int alle1_tlbmask(CPUARMState *env)
|
|
{
|
|
/*
|
|
* Note that the 'ALL' scope must invalidate both stage 1 and
|
|
* stage 2 translations, whereas most other scopes only invalidate
|
|
* stage 1 translations.
|
|
*/
|
|
if (arm_is_secure_below_el3(env)) {
|
|
return ARMMMUIdxBit_SE10_1 |
|
|
ARMMMUIdxBit_SE10_1_PAN |
|
|
ARMMMUIdxBit_SE10_0;
|
|
} else if (arm_feature(env, ARM_FEATURE_EL2)) {
|
|
return ARMMMUIdxBit_E10_1 |
|
|
ARMMMUIdxBit_E10_1_PAN |
|
|
ARMMMUIdxBit_E10_0 |
|
|
ARMMMUIdxBit_Stage2;
|
|
} else {
|
|
return ARMMMUIdxBit_E10_1 |
|
|
ARMMMUIdxBit_E10_1_PAN |
|
|
ARMMMUIdxBit_E10_0;
|
|
}
|
|
}
|
|
|
|
static int e2_tlbmask(CPUARMState *env)
|
|
{
|
|
/* TODO: ARMv8.4-SecEL2 */
|
|
return ARMMMUIdxBit_E20_0 |
|
|
ARMMMUIdxBit_E20_2 |
|
|
ARMMMUIdxBit_E20_2_PAN |
|
|
ARMMMUIdxBit_E2;
|
|
}
|
|
|
|
static void tlbi_aa64_alle1_write(CPUARMState *env, const ARMCPRegInfo *ri,
|
|
uint64_t value)
|
|
{
|
|
CPUState *cs = env_cpu(env);
|
|
int mask = alle1_tlbmask(env);
|
|
|
|
tlb_flush_by_mmuidx(cs, mask);
|
|
}
|
|
|
|
static void tlbi_aa64_alle2_write(CPUARMState *env, const ARMCPRegInfo *ri,
|
|
uint64_t value)
|
|
{
|
|
CPUState *cs = env_cpu(env);
|
|
int mask = e2_tlbmask(env);
|
|
|
|
tlb_flush_by_mmuidx(cs, mask);
|
|
}
|
|
|
|
static void tlbi_aa64_alle3_write(CPUARMState *env, const ARMCPRegInfo *ri,
|
|
uint64_t value)
|
|
{
|
|
ARMCPU *cpu = env_archcpu(env);
|
|
CPUState *cs = CPU(cpu);
|
|
|
|
tlb_flush_by_mmuidx(cs, ARMMMUIdxBit_SE3);
|
|
}
|
|
|
|
static void tlbi_aa64_alle1is_write(CPUARMState *env, const ARMCPRegInfo *ri,
|
|
uint64_t value)
|
|
{
|
|
CPUState *cs = env_cpu(env);
|
|
int mask = alle1_tlbmask(env);
|
|
|
|
tlb_flush_by_mmuidx_all_cpus_synced(cs, mask);
|
|
}
|
|
|
|
static void tlbi_aa64_alle2is_write(CPUARMState *env, const ARMCPRegInfo *ri,
|
|
uint64_t value)
|
|
{
|
|
CPUState *cs = env_cpu(env);
|
|
int mask = e2_tlbmask(env);
|
|
|
|
tlb_flush_by_mmuidx_all_cpus_synced(cs, mask);
|
|
}
|
|
|
|
static void tlbi_aa64_alle3is_write(CPUARMState *env, const ARMCPRegInfo *ri,
|
|
uint64_t value)
|
|
{
|
|
CPUState *cs = env_cpu(env);
|
|
|
|
tlb_flush_by_mmuidx_all_cpus_synced(cs, ARMMMUIdxBit_SE3);
|
|
}
|
|
|
|
static void tlbi_aa64_vae2_write(CPUARMState *env, const ARMCPRegInfo *ri,
|
|
uint64_t value)
|
|
{
|
|
/* Invalidate by VA, EL2
|
|
* Currently handles both VAE2 and VALE2, since we don't support
|
|
* flush-last-level-only.
|
|
*/
|
|
CPUState *cs = env_cpu(env);
|
|
int mask = e2_tlbmask(env);
|
|
uint64_t pageaddr = sextract64(value << 12, 0, 56);
|
|
|
|
tlb_flush_page_by_mmuidx(cs, pageaddr, mask);
|
|
}
|
|
|
|
static void tlbi_aa64_vae3_write(CPUARMState *env, const ARMCPRegInfo *ri,
|
|
uint64_t value)
|
|
{
|
|
/* Invalidate by VA, EL3
|
|
* Currently handles both VAE3 and VALE3, since we don't support
|
|
* flush-last-level-only.
|
|
*/
|
|
ARMCPU *cpu = env_archcpu(env);
|
|
CPUState *cs = CPU(cpu);
|
|
uint64_t pageaddr = sextract64(value << 12, 0, 56);
|
|
|
|
tlb_flush_page_by_mmuidx(cs, pageaddr, ARMMMUIdxBit_SE3);
|
|
}
|
|
|
|
static void tlbi_aa64_vae1is_write(CPUARMState *env, const ARMCPRegInfo *ri,
|
|
uint64_t value)
|
|
{
|
|
CPUState *cs = env_cpu(env);
|
|
int mask = vae1_tlbmask(env);
|
|
uint64_t pageaddr = sextract64(value << 12, 0, 56);
|
|
|
|
tlb_flush_page_by_mmuidx_all_cpus_synced(cs, pageaddr, mask);
|
|
}
|
|
|
|
static void tlbi_aa64_vae1_write(CPUARMState *env, const ARMCPRegInfo *ri,
|
|
uint64_t value)
|
|
{
|
|
/* Invalidate by VA, EL1&0 (AArch64 version).
|
|
* Currently handles all of VAE1, VAAE1, VAALE1 and VALE1,
|
|
* since we don't support flush-for-specific-ASID-only or
|
|
* flush-last-level-only.
|
|
*/
|
|
CPUState *cs = env_cpu(env);
|
|
int mask = vae1_tlbmask(env);
|
|
uint64_t pageaddr = sextract64(value << 12, 0, 56);
|
|
|
|
if (tlb_force_broadcast(env)) {
|
|
tlb_flush_page_by_mmuidx_all_cpus_synced(cs, pageaddr, mask);
|
|
} else {
|
|
tlb_flush_page_by_mmuidx(cs, pageaddr, mask);
|
|
}
|
|
}
|
|
|
|
static void tlbi_aa64_vae2is_write(CPUARMState *env, const ARMCPRegInfo *ri,
|
|
uint64_t value)
|
|
{
|
|
CPUState *cs = env_cpu(env);
|
|
uint64_t pageaddr = sextract64(value << 12, 0, 56);
|
|
|
|
tlb_flush_page_by_mmuidx_all_cpus_synced(cs, pageaddr,
|
|
ARMMMUIdxBit_E2);
|
|
}
|
|
|
|
static void tlbi_aa64_vae3is_write(CPUARMState *env, const ARMCPRegInfo *ri,
|
|
uint64_t value)
|
|
{
|
|
CPUState *cs = env_cpu(env);
|
|
uint64_t pageaddr = sextract64(value << 12, 0, 56);
|
|
|
|
tlb_flush_page_by_mmuidx_all_cpus_synced(cs, pageaddr,
|
|
ARMMMUIdxBit_SE3);
|
|
}
|
|
|
|
static void tlbi_aa64_ipas2e1_write(CPUARMState *env, const ARMCPRegInfo *ri,
|
|
uint64_t value)
|
|
{
|
|
/* Invalidate by IPA. This has to invalidate any structures that
|
|
* contain only stage 2 translation information, but does not need
|
|
* to apply to structures that contain combined stage 1 and stage 2
|
|
* translation information.
|
|
* This must NOP if EL2 isn't implemented or SCR_EL3.NS is zero.
|
|
*/
|
|
ARMCPU *cpu = env_archcpu(env);
|
|
CPUState *cs = CPU(cpu);
|
|
uint64_t pageaddr;
|
|
|
|
if (!arm_feature(env, ARM_FEATURE_EL2) || !(env->cp15.scr_el3 & SCR_NS)) {
|
|
return;
|
|
}
|
|
|
|
pageaddr = sextract64(value << 12, 0, 48);
|
|
|
|
tlb_flush_page_by_mmuidx(cs, pageaddr, ARMMMUIdxBit_Stage2);
|
|
}
|
|
|
|
static void tlbi_aa64_ipas2e1is_write(CPUARMState *env, const ARMCPRegInfo *ri,
|
|
uint64_t value)
|
|
{
|
|
CPUState *cs = env_cpu(env);
|
|
uint64_t pageaddr;
|
|
|
|
if (!arm_feature(env, ARM_FEATURE_EL2) || !(env->cp15.scr_el3 & SCR_NS)) {
|
|
return;
|
|
}
|
|
|
|
pageaddr = sextract64(value << 12, 0, 48);
|
|
|
|
tlb_flush_page_by_mmuidx_all_cpus_synced(cs, pageaddr,
|
|
ARMMMUIdxBit_Stage2);
|
|
}
|
|
|
|
static CPAccessResult aa64_zva_access(CPUARMState *env, const ARMCPRegInfo *ri,
|
|
bool isread)
|
|
{
|
|
int cur_el = arm_current_el(env);
|
|
|
|
if (cur_el < 2) {
|
|
uint64_t hcr = arm_hcr_el2_eff(env);
|
|
|
|
if (cur_el == 0) {
|
|
if ((hcr & (HCR_E2H | HCR_TGE)) == (HCR_E2H | HCR_TGE)) {
|
|
if (!(env->cp15.sctlr_el[2] & SCTLR_DZE)) {
|
|
return CP_ACCESS_TRAP_EL2;
|
|
}
|
|
} else {
|
|
if (!(env->cp15.sctlr_el[1] & SCTLR_DZE)) {
|
|
return CP_ACCESS_TRAP;
|
|
}
|
|
if (hcr & HCR_TDZ) {
|
|
return CP_ACCESS_TRAP_EL2;
|
|
}
|
|
}
|
|
} else if (hcr & HCR_TDZ) {
|
|
return CP_ACCESS_TRAP_EL2;
|
|
}
|
|
}
|
|
return CP_ACCESS_OK;
|
|
}
|
|
|
|
static uint64_t aa64_dczid_read(CPUARMState *env, const ARMCPRegInfo *ri)
|
|
{
|
|
ARMCPU *cpu = env_archcpu(env);
|
|
int dzp_bit = 1 << 4;
|
|
|
|
/* DZP indicates whether DC ZVA access is allowed */
|
|
if (aa64_zva_access(env, NULL, false) == CP_ACCESS_OK) {
|
|
dzp_bit = 0;
|
|
}
|
|
return cpu->dcz_blocksize | dzp_bit;
|
|
}
|
|
|
|
static CPAccessResult sp_el0_access(CPUARMState *env, const ARMCPRegInfo *ri,
|
|
bool isread)
|
|
{
|
|
if (!(env->pstate & PSTATE_SP)) {
|
|
/* Access to SP_EL0 is undefined if it's being used as
|
|
* the stack pointer.
|
|
*/
|
|
return CP_ACCESS_TRAP_UNCATEGORIZED;
|
|
}
|
|
return CP_ACCESS_OK;
|
|
}
|
|
|
|
static uint64_t spsel_read(CPUARMState *env, const ARMCPRegInfo *ri)
|
|
{
|
|
return env->pstate & PSTATE_SP;
|
|
}
|
|
|
|
static void spsel_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t val)
|
|
{
|
|
update_spsel(env, val);
|
|
}
|
|
|
|
static void sctlr_write(CPUARMState *env, const ARMCPRegInfo *ri,
|
|
uint64_t value)
|
|
{
|
|
ARMCPU *cpu = env_archcpu(env);
|
|
|
|
if (raw_read(env, ri) == value) {
|
|
/* Skip the TLB flush if nothing actually changed; Linux likes
|
|
* to do a lot of pointless SCTLR writes.
|
|
*/
|
|
return;
|
|
}
|
|
|
|
if (arm_feature(env, ARM_FEATURE_PMSA) && !cpu->has_mpu) {
|
|
/* M bit is RAZ/WI for PMSA with no MPU implemented */
|
|
value &= ~SCTLR_M;
|
|
}
|
|
|
|
raw_write(env, ri, value);
|
|
/* ??? Lots of these bits are not implemented. */
|
|
/* This may enable/disable the MMU, so do a TLB flush. */
|
|
tlb_flush(CPU(cpu));
|
|
|
|
if (ri->type & ARM_CP_SUPPRESS_TB_END) {
|
|
/*
|
|
* Normally we would always end the TB on an SCTLR write; see the
|
|
* comment in ARMCPRegInfo sctlr initialization below for why Xscale
|
|
* is special. Setting ARM_CP_SUPPRESS_TB_END also stops the rebuild
|
|
* of hflags from the translator, so do it here.
|
|
*/
|
|
arm_rebuild_hflags(env);
|
|
}
|
|
}
|
|
|
|
static CPAccessResult fpexc32_access(CPUARMState *env, const ARMCPRegInfo *ri,
|
|
bool isread)
|
|
{
|
|
if ((env->cp15.cptr_el[2] & CPTR_TFP) && arm_current_el(env) == 2) {
|
|
return CP_ACCESS_TRAP_FP_EL2;
|
|
}
|
|
if (env->cp15.cptr_el[3] & CPTR_TFP) {
|
|
return CP_ACCESS_TRAP_FP_EL3;
|
|
}
|
|
return CP_ACCESS_OK;
|
|
}
|
|
|
|
static void sdcr_write(CPUARMState *env, const ARMCPRegInfo *ri,
|
|
uint64_t value)
|
|
{
|
|
env->cp15.mdcr_el3 = value & SDCR_VALID_MASK;
|
|
}
|
|
|
|
static const ARMCPRegInfo v8_cp_reginfo[] = {
|
|
/* Minimal set of EL0-visible registers. This will need to be expanded
|
|
* significantly for system emulation of AArch64 CPUs.
|
|
*/
|
|
{ .name = "NZCV", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 3, .opc1 = 3, .opc2 = 0, .crn = 4, .crm = 2,
|
|
.access = PL0_RW, .type = ARM_CP_NZCV },
|
|
{ .name = "DAIF", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 3, .opc1 = 3, .opc2 = 1, .crn = 4, .crm = 2,
|
|
.type = ARM_CP_NO_RAW,
|
|
.access = PL0_RW, .accessfn = aa64_daif_access,
|
|
.fieldoffset = offsetof(CPUARMState, daif),
|
|
.writefn = aa64_daif_write, .resetfn = arm_cp_reset_ignore },
|
|
{ .name = "FPCR", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 3, .opc1 = 3, .opc2 = 0, .crn = 4, .crm = 4,
|
|
.access = PL0_RW, .type = ARM_CP_FPU | ARM_CP_SUPPRESS_TB_END,
|
|
.readfn = aa64_fpcr_read, .writefn = aa64_fpcr_write },
|
|
{ .name = "FPSR", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 3, .opc1 = 3, .opc2 = 1, .crn = 4, .crm = 4,
|
|
.access = PL0_RW, .type = ARM_CP_FPU | ARM_CP_SUPPRESS_TB_END,
|
|
.readfn = aa64_fpsr_read, .writefn = aa64_fpsr_write },
|
|
{ .name = "DCZID_EL0", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 3, .opc1 = 3, .opc2 = 7, .crn = 0, .crm = 0,
|
|
.access = PL0_R, .type = ARM_CP_NO_RAW,
|
|
.readfn = aa64_dczid_read },
|
|
{ .name = "DC_ZVA", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 1, .opc1 = 3, .crn = 7, .crm = 4, .opc2 = 1,
|
|
.access = PL0_W, .type = ARM_CP_DC_ZVA,
|
|
#ifndef CONFIG_USER_ONLY
|
|
/* Avoid overhead of an access check that always passes in user-mode */
|
|
.accessfn = aa64_zva_access,
|
|
#endif
|
|
},
|
|
{ .name = "CURRENTEL", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 3, .opc1 = 0, .opc2 = 2, .crn = 4, .crm = 2,
|
|
.access = PL1_R, .type = ARM_CP_CURRENTEL },
|
|
/* Cache ops: all NOPs since we don't emulate caches */
|
|
{ .name = "IC_IALLUIS", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 1, .opc1 = 0, .crn = 7, .crm = 1, .opc2 = 0,
|
|
.access = PL1_W, .type = ARM_CP_NOP },
|
|
{ .name = "IC_IALLU", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 1, .opc1 = 0, .crn = 7, .crm = 5, .opc2 = 0,
|
|
.access = PL1_W, .type = ARM_CP_NOP },
|
|
{ .name = "IC_IVAU", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 1, .opc1 = 3, .crn = 7, .crm = 5, .opc2 = 1,
|
|
.access = PL0_W, .type = ARM_CP_NOP,
|
|
.accessfn = aa64_cacheop_access },
|
|
{ .name = "DC_IVAC", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 1, .opc1 = 0, .crn = 7, .crm = 6, .opc2 = 1,
|
|
.access = PL1_W, .type = ARM_CP_NOP },
|
|
{ .name = "DC_ISW", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 1, .opc1 = 0, .crn = 7, .crm = 6, .opc2 = 2,
|
|
.access = PL1_W, .type = ARM_CP_NOP },
|
|
{ .name = "DC_CVAC", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 1, .opc1 = 3, .crn = 7, .crm = 10, .opc2 = 1,
|
|
.access = PL0_W, .type = ARM_CP_NOP,
|
|
.accessfn = aa64_cacheop_access },
|
|
{ .name = "DC_CSW", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 1, .opc1 = 0, .crn = 7, .crm = 10, .opc2 = 2,
|
|
.access = PL1_W, .type = ARM_CP_NOP },
|
|
{ .name = "DC_CVAU", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 1, .opc1 = 3, .crn = 7, .crm = 11, .opc2 = 1,
|
|
.access = PL0_W, .type = ARM_CP_NOP,
|
|
.accessfn = aa64_cacheop_access },
|
|
{ .name = "DC_CIVAC", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 1, .opc1 = 3, .crn = 7, .crm = 14, .opc2 = 1,
|
|
.access = PL0_W, .type = ARM_CP_NOP,
|
|
.accessfn = aa64_cacheop_access },
|
|
{ .name = "DC_CISW", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 1, .opc1 = 0, .crn = 7, .crm = 14, .opc2 = 2,
|
|
.access = PL1_W, .type = ARM_CP_NOP },
|
|
/* TLBI operations */
|
|
{ .name = "TLBI_VMALLE1IS", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 1, .opc1 = 0, .crn = 8, .crm = 3, .opc2 = 0,
|
|
.access = PL1_W, .type = ARM_CP_NO_RAW,
|
|
.writefn = tlbi_aa64_vmalle1is_write },
|
|
{ .name = "TLBI_VAE1IS", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 1, .opc1 = 0, .crn = 8, .crm = 3, .opc2 = 1,
|
|
.access = PL1_W, .type = ARM_CP_NO_RAW,
|
|
.writefn = tlbi_aa64_vae1is_write },
|
|
{ .name = "TLBI_ASIDE1IS", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 1, .opc1 = 0, .crn = 8, .crm = 3, .opc2 = 2,
|
|
.access = PL1_W, .type = ARM_CP_NO_RAW,
|
|
.writefn = tlbi_aa64_vmalle1is_write },
|
|
{ .name = "TLBI_VAAE1IS", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 1, .opc1 = 0, .crn = 8, .crm = 3, .opc2 = 3,
|
|
.access = PL1_W, .type = ARM_CP_NO_RAW,
|
|
.writefn = tlbi_aa64_vae1is_write },
|
|
{ .name = "TLBI_VALE1IS", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 1, .opc1 = 0, .crn = 8, .crm = 3, .opc2 = 5,
|
|
.access = PL1_W, .type = ARM_CP_NO_RAW,
|
|
.writefn = tlbi_aa64_vae1is_write },
|
|
{ .name = "TLBI_VAALE1IS", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 1, .opc1 = 0, .crn = 8, .crm = 3, .opc2 = 7,
|
|
.access = PL1_W, .type = ARM_CP_NO_RAW,
|
|
.writefn = tlbi_aa64_vae1is_write },
|
|
{ .name = "TLBI_VMALLE1", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 1, .opc1 = 0, .crn = 8, .crm = 7, .opc2 = 0,
|
|
.access = PL1_W, .type = ARM_CP_NO_RAW,
|
|
.writefn = tlbi_aa64_vmalle1_write },
|
|
{ .name = "TLBI_VAE1", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 1, .opc1 = 0, .crn = 8, .crm = 7, .opc2 = 1,
|
|
.access = PL1_W, .type = ARM_CP_NO_RAW,
|
|
.writefn = tlbi_aa64_vae1_write },
|
|
{ .name = "TLBI_ASIDE1", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 1, .opc1 = 0, .crn = 8, .crm = 7, .opc2 = 2,
|
|
.access = PL1_W, .type = ARM_CP_NO_RAW,
|
|
.writefn = tlbi_aa64_vmalle1_write },
|
|
{ .name = "TLBI_VAAE1", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 1, .opc1 = 0, .crn = 8, .crm = 7, .opc2 = 3,
|
|
.access = PL1_W, .type = ARM_CP_NO_RAW,
|
|
.writefn = tlbi_aa64_vae1_write },
|
|
{ .name = "TLBI_VALE1", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 1, .opc1 = 0, .crn = 8, .crm = 7, .opc2 = 5,
|
|
.access = PL1_W, .type = ARM_CP_NO_RAW,
|
|
.writefn = tlbi_aa64_vae1_write },
|
|
{ .name = "TLBI_VAALE1", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 1, .opc1 = 0, .crn = 8, .crm = 7, .opc2 = 7,
|
|
.access = PL1_W, .type = ARM_CP_NO_RAW,
|
|
.writefn = tlbi_aa64_vae1_write },
|
|
{ .name = "TLBI_IPAS2E1IS", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 1, .opc1 = 4, .crn = 8, .crm = 0, .opc2 = 1,
|
|
.access = PL2_W, .type = ARM_CP_NO_RAW,
|
|
.writefn = tlbi_aa64_ipas2e1is_write },
|
|
{ .name = "TLBI_IPAS2LE1IS", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 1, .opc1 = 4, .crn = 8, .crm = 0, .opc2 = 5,
|
|
.access = PL2_W, .type = ARM_CP_NO_RAW,
|
|
.writefn = tlbi_aa64_ipas2e1is_write },
|
|
{ .name = "TLBI_ALLE1IS", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 1, .opc1 = 4, .crn = 8, .crm = 3, .opc2 = 4,
|
|
.access = PL2_W, .type = ARM_CP_NO_RAW,
|
|
.writefn = tlbi_aa64_alle1is_write },
|
|
{ .name = "TLBI_VMALLS12E1IS", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 1, .opc1 = 4, .crn = 8, .crm = 3, .opc2 = 6,
|
|
.access = PL2_W, .type = ARM_CP_NO_RAW,
|
|
.writefn = tlbi_aa64_alle1is_write },
|
|
{ .name = "TLBI_IPAS2E1", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 1, .opc1 = 4, .crn = 8, .crm = 4, .opc2 = 1,
|
|
.access = PL2_W, .type = ARM_CP_NO_RAW,
|
|
.writefn = tlbi_aa64_ipas2e1_write },
|
|
{ .name = "TLBI_IPAS2LE1", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 1, .opc1 = 4, .crn = 8, .crm = 4, .opc2 = 5,
|
|
.access = PL2_W, .type = ARM_CP_NO_RAW,
|
|
.writefn = tlbi_aa64_ipas2e1_write },
|
|
{ .name = "TLBI_ALLE1", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 1, .opc1 = 4, .crn = 8, .crm = 7, .opc2 = 4,
|
|
.access = PL2_W, .type = ARM_CP_NO_RAW,
|
|
.writefn = tlbi_aa64_alle1_write },
|
|
{ .name = "TLBI_VMALLS12E1", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 1, .opc1 = 4, .crn = 8, .crm = 7, .opc2 = 6,
|
|
.access = PL2_W, .type = ARM_CP_NO_RAW,
|
|
.writefn = tlbi_aa64_alle1is_write },
|
|
#ifndef CONFIG_USER_ONLY
|
|
/* 64 bit address translation operations */
|
|
{ .name = "AT_S1E1R", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 1, .opc1 = 0, .crn = 7, .crm = 8, .opc2 = 0,
|
|
.access = PL1_W, .type = ARM_CP_NO_RAW | ARM_CP_RAISES_EXC,
|
|
.writefn = ats_write64 },
|
|
{ .name = "AT_S1E1W", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 1, .opc1 = 0, .crn = 7, .crm = 8, .opc2 = 1,
|
|
.access = PL1_W, .type = ARM_CP_NO_RAW | ARM_CP_RAISES_EXC,
|
|
.writefn = ats_write64 },
|
|
{ .name = "AT_S1E0R", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 1, .opc1 = 0, .crn = 7, .crm = 8, .opc2 = 2,
|
|
.access = PL1_W, .type = ARM_CP_NO_RAW | ARM_CP_RAISES_EXC,
|
|
.writefn = ats_write64 },
|
|
{ .name = "AT_S1E0W", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 1, .opc1 = 0, .crn = 7, .crm = 8, .opc2 = 3,
|
|
.access = PL1_W, .type = ARM_CP_NO_RAW | ARM_CP_RAISES_EXC,
|
|
.writefn = ats_write64 },
|
|
{ .name = "AT_S12E1R", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 1, .opc1 = 4, .crn = 7, .crm = 8, .opc2 = 4,
|
|
.access = PL2_W, .type = ARM_CP_NO_RAW | ARM_CP_RAISES_EXC,
|
|
.writefn = ats_write64 },
|
|
{ .name = "AT_S12E1W", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 1, .opc1 = 4, .crn = 7, .crm = 8, .opc2 = 5,
|
|
.access = PL2_W, .type = ARM_CP_NO_RAW | ARM_CP_RAISES_EXC,
|
|
.writefn = ats_write64 },
|
|
{ .name = "AT_S12E0R", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 1, .opc1 = 4, .crn = 7, .crm = 8, .opc2 = 6,
|
|
.access = PL2_W, .type = ARM_CP_NO_RAW | ARM_CP_RAISES_EXC,
|
|
.writefn = ats_write64 },
|
|
{ .name = "AT_S12E0W", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 1, .opc1 = 4, .crn = 7, .crm = 8, .opc2 = 7,
|
|
.access = PL2_W, .type = ARM_CP_NO_RAW | ARM_CP_RAISES_EXC,
|
|
.writefn = ats_write64 },
|
|
/* AT S1E2* are elsewhere as they UNDEF from EL3 if EL2 is not present */
|
|
{ .name = "AT_S1E3R", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 1, .opc1 = 6, .crn = 7, .crm = 8, .opc2 = 0,
|
|
.access = PL3_W, .type = ARM_CP_NO_RAW | ARM_CP_RAISES_EXC,
|
|
.writefn = ats_write64 },
|
|
{ .name = "AT_S1E3W", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 1, .opc1 = 6, .crn = 7, .crm = 8, .opc2 = 1,
|
|
.access = PL3_W, .type = ARM_CP_NO_RAW | ARM_CP_RAISES_EXC,
|
|
.writefn = ats_write64 },
|
|
{ .name = "PAR_EL1", .state = ARM_CP_STATE_AA64,
|
|
.type = ARM_CP_ALIAS,
|
|
.opc0 = 3, .opc1 = 0, .crn = 7, .crm = 4, .opc2 = 0,
|
|
.access = PL1_RW, .resetvalue = 0,
|
|
.fieldoffset = offsetof(CPUARMState, cp15.par_el[1]),
|
|
.writefn = par_write },
|
|
#endif
|
|
/* TLB invalidate last level of translation table walk */
|
|
{ .name = "TLBIMVALIS", .cp = 15, .opc1 = 0, .crn = 8, .crm = 3, .opc2 = 5,
|
|
.type = ARM_CP_NO_RAW, .access = PL1_W, .writefn = tlbimva_is_write },
|
|
{ .name = "TLBIMVAALIS", .cp = 15, .opc1 = 0, .crn = 8, .crm = 3, .opc2 = 7,
|
|
.type = ARM_CP_NO_RAW, .access = PL1_W,
|
|
.writefn = tlbimvaa_is_write },
|
|
{ .name = "TLBIMVAL", .cp = 15, .opc1 = 0, .crn = 8, .crm = 7, .opc2 = 5,
|
|
.type = ARM_CP_NO_RAW, .access = PL1_W, .writefn = tlbimva_write },
|
|
{ .name = "TLBIMVAAL", .cp = 15, .opc1 = 0, .crn = 8, .crm = 7, .opc2 = 7,
|
|
.type = ARM_CP_NO_RAW, .access = PL1_W, .writefn = tlbimvaa_write },
|
|
{ .name = "TLBIMVALH", .cp = 15, .opc1 = 4, .crn = 8, .crm = 7, .opc2 = 5,
|
|
.type = ARM_CP_NO_RAW, .access = PL2_W,
|
|
.writefn = tlbimva_hyp_write },
|
|
{ .name = "TLBIMVALHIS",
|
|
.cp = 15, .opc1 = 4, .crn = 8, .crm = 3, .opc2 = 5,
|
|
.type = ARM_CP_NO_RAW, .access = PL2_W,
|
|
.writefn = tlbimva_hyp_is_write },
|
|
{ .name = "TLBIIPAS2",
|
|
.cp = 15, .opc1 = 4, .crn = 8, .crm = 4, .opc2 = 1,
|
|
.type = ARM_CP_NO_RAW, .access = PL2_W,
|
|
.writefn = tlbiipas2_write },
|
|
{ .name = "TLBIIPAS2IS",
|
|
.cp = 15, .opc1 = 4, .crn = 8, .crm = 0, .opc2 = 1,
|
|
.type = ARM_CP_NO_RAW, .access = PL2_W,
|
|
.writefn = tlbiipas2_is_write },
|
|
{ .name = "TLBIIPAS2L",
|
|
.cp = 15, .opc1 = 4, .crn = 8, .crm = 4, .opc2 = 5,
|
|
.type = ARM_CP_NO_RAW, .access = PL2_W,
|
|
.writefn = tlbiipas2_write },
|
|
{ .name = "TLBIIPAS2LIS",
|
|
.cp = 15, .opc1 = 4, .crn = 8, .crm = 0, .opc2 = 5,
|
|
.type = ARM_CP_NO_RAW, .access = PL2_W,
|
|
.writefn = tlbiipas2_is_write },
|
|
/* 32 bit cache operations */
|
|
{ .name = "ICIALLUIS", .cp = 15, .opc1 = 0, .crn = 7, .crm = 1, .opc2 = 0,
|
|
.type = ARM_CP_NOP, .access = PL1_W },
|
|
{ .name = "BPIALLUIS", .cp = 15, .opc1 = 0, .crn = 7, .crm = 1, .opc2 = 6,
|
|
.type = ARM_CP_NOP, .access = PL1_W },
|
|
{ .name = "ICIALLU", .cp = 15, .opc1 = 0, .crn = 7, .crm = 5, .opc2 = 0,
|
|
.type = ARM_CP_NOP, .access = PL1_W },
|
|
{ .name = "ICIMVAU", .cp = 15, .opc1 = 0, .crn = 7, .crm = 5, .opc2 = 1,
|
|
.type = ARM_CP_NOP, .access = PL1_W },
|
|
{ .name = "BPIALL", .cp = 15, .opc1 = 0, .crn = 7, .crm = 5, .opc2 = 6,
|
|
.type = ARM_CP_NOP, .access = PL1_W },
|
|
{ .name = "BPIMVA", .cp = 15, .opc1 = 0, .crn = 7, .crm = 5, .opc2 = 7,
|
|
.type = ARM_CP_NOP, .access = PL1_W },
|
|
{ .name = "DCIMVAC", .cp = 15, .opc1 = 0, .crn = 7, .crm = 6, .opc2 = 1,
|
|
.type = ARM_CP_NOP, .access = PL1_W },
|
|
{ .name = "DCISW", .cp = 15, .opc1 = 0, .crn = 7, .crm = 6, .opc2 = 2,
|
|
.type = ARM_CP_NOP, .access = PL1_W },
|
|
{ .name = "DCCMVAC", .cp = 15, .opc1 = 0, .crn = 7, .crm = 10, .opc2 = 1,
|
|
.type = ARM_CP_NOP, .access = PL1_W },
|
|
{ .name = "DCCSW", .cp = 15, .opc1 = 0, .crn = 7, .crm = 10, .opc2 = 2,
|
|
.type = ARM_CP_NOP, .access = PL1_W },
|
|
{ .name = "DCCMVAU", .cp = 15, .opc1 = 0, .crn = 7, .crm = 11, .opc2 = 1,
|
|
.type = ARM_CP_NOP, .access = PL1_W },
|
|
{ .name = "DCCIMVAC", .cp = 15, .opc1 = 0, .crn = 7, .crm = 14, .opc2 = 1,
|
|
.type = ARM_CP_NOP, .access = PL1_W },
|
|
{ .name = "DCCISW", .cp = 15, .opc1 = 0, .crn = 7, .crm = 14, .opc2 = 2,
|
|
.type = ARM_CP_NOP, .access = PL1_W },
|
|
/* MMU Domain access control / MPU write buffer control */
|
|
{ .name = "DACR", .cp = 15, .opc1 = 0, .crn = 3, .crm = 0, .opc2 = 0,
|
|
.access = PL1_RW, .resetvalue = 0,
|
|
.writefn = dacr_write, .raw_writefn = raw_write,
|
|
.bank_fieldoffsets = { offsetoflow32(CPUARMState, cp15.dacr_s),
|
|
offsetoflow32(CPUARMState, cp15.dacr_ns) } },
|
|
{ .name = "ELR_EL1", .state = ARM_CP_STATE_AA64,
|
|
.type = ARM_CP_ALIAS,
|
|
.opc0 = 3, .opc1 = 0, .crn = 4, .crm = 0, .opc2 = 1,
|
|
.access = PL1_RW,
|
|
.fieldoffset = offsetof(CPUARMState, elr_el[1]) },
|
|
{ .name = "SPSR_EL1", .state = ARM_CP_STATE_AA64,
|
|
.type = ARM_CP_ALIAS,
|
|
.opc0 = 3, .opc1 = 0, .crn = 4, .crm = 0, .opc2 = 0,
|
|
.access = PL1_RW,
|
|
.fieldoffset = offsetof(CPUARMState, banked_spsr[BANK_SVC]) },
|
|
/* We rely on the access checks not allowing the guest to write to the
|
|
* state field when SPSel indicates that it's being used as the stack
|
|
* pointer.
|
|
*/
|
|
{ .name = "SP_EL0", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 3, .opc1 = 0, .crn = 4, .crm = 1, .opc2 = 0,
|
|
.access = PL1_RW, .accessfn = sp_el0_access,
|
|
.type = ARM_CP_ALIAS,
|
|
.fieldoffset = offsetof(CPUARMState, sp_el[0]) },
|
|
{ .name = "SP_EL1", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 3, .opc1 = 4, .crn = 4, .crm = 1, .opc2 = 0,
|
|
.access = PL2_RW, .type = ARM_CP_ALIAS,
|
|
.fieldoffset = offsetof(CPUARMState, sp_el[1]) },
|
|
{ .name = "SPSel", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 3, .opc1 = 0, .crn = 4, .crm = 2, .opc2 = 0,
|
|
.type = ARM_CP_NO_RAW,
|
|
.access = PL1_RW, .readfn = spsel_read, .writefn = spsel_write },
|
|
{ .name = "FPEXC32_EL2", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 3, .opc1 = 4, .crn = 5, .crm = 3, .opc2 = 0,
|
|
.type = ARM_CP_ALIAS,
|
|
.fieldoffset = offsetof(CPUARMState, vfp.xregs[ARM_VFP_FPEXC]),
|
|
.access = PL2_RW, .accessfn = fpexc32_access },
|
|
{ .name = "DACR32_EL2", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 3, .opc1 = 4, .crn = 3, .crm = 0, .opc2 = 0,
|
|
.access = PL2_RW, .resetvalue = 0,
|
|
.writefn = dacr_write, .raw_writefn = raw_write,
|
|
.fieldoffset = offsetof(CPUARMState, cp15.dacr32_el2) },
|
|
{ .name = "IFSR32_EL2", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 3, .opc1 = 4, .crn = 5, .crm = 0, .opc2 = 1,
|
|
.access = PL2_RW, .resetvalue = 0,
|
|
.fieldoffset = offsetof(CPUARMState, cp15.ifsr32_el2) },
|
|
{ .name = "SPSR_IRQ", .state = ARM_CP_STATE_AA64,
|
|
.type = ARM_CP_ALIAS,
|
|
.opc0 = 3, .opc1 = 4, .crn = 4, .crm = 3, .opc2 = 0,
|
|
.access = PL2_RW,
|
|
.fieldoffset = offsetof(CPUARMState, banked_spsr[BANK_IRQ]) },
|
|
{ .name = "SPSR_ABT", .state = ARM_CP_STATE_AA64,
|
|
.type = ARM_CP_ALIAS,
|
|
.opc0 = 3, .opc1 = 4, .crn = 4, .crm = 3, .opc2 = 1,
|
|
.access = PL2_RW,
|
|
.fieldoffset = offsetof(CPUARMState, banked_spsr[BANK_ABT]) },
|
|
{ .name = "SPSR_UND", .state = ARM_CP_STATE_AA64,
|
|
.type = ARM_CP_ALIAS,
|
|
.opc0 = 3, .opc1 = 4, .crn = 4, .crm = 3, .opc2 = 2,
|
|
.access = PL2_RW,
|
|
.fieldoffset = offsetof(CPUARMState, banked_spsr[BANK_UND]) },
|
|
{ .name = "SPSR_FIQ", .state = ARM_CP_STATE_AA64,
|
|
.type = ARM_CP_ALIAS,
|
|
.opc0 = 3, .opc1 = 4, .crn = 4, .crm = 3, .opc2 = 3,
|
|
.access = PL2_RW,
|
|
.fieldoffset = offsetof(CPUARMState, banked_spsr[BANK_FIQ]) },
|
|
{ .name = "MDCR_EL3", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 3, .opc1 = 6, .crn = 1, .crm = 3, .opc2 = 1,
|
|
.resetvalue = 0,
|
|
.access = PL3_RW, .fieldoffset = offsetof(CPUARMState, cp15.mdcr_el3) },
|
|
{ .name = "SDCR", .type = ARM_CP_ALIAS,
|
|
.cp = 15, .opc1 = 0, .crn = 1, .crm = 3, .opc2 = 1,
|
|
.access = PL1_RW, .accessfn = access_trap_aa32s_el1,
|
|
.writefn = sdcr_write,
|
|
.fieldoffset = offsetoflow32(CPUARMState, cp15.mdcr_el3) },
|
|
REGINFO_SENTINEL
|
|
};
|
|
|
|
/* Used to describe the behaviour of EL2 regs when EL2 does not exist. */
|
|
static const ARMCPRegInfo el3_no_el2_cp_reginfo[] = {
|
|
{ .name = "VBAR_EL2", .state = ARM_CP_STATE_BOTH,
|
|
.opc0 = 3, .opc1 = 4, .crn = 12, .crm = 0, .opc2 = 0,
|
|
.access = PL2_RW,
|
|
.readfn = arm_cp_read_zero, .writefn = arm_cp_write_ignore },
|
|
{ .name = "HCR_EL2", .state = ARM_CP_STATE_BOTH,
|
|
.type = ARM_CP_NO_RAW,
|
|
.opc0 = 3, .opc1 = 4, .crn = 1, .crm = 1, .opc2 = 0,
|
|
.access = PL2_RW,
|
|
.type = ARM_CP_CONST, .resetvalue = 0 },
|
|
{ .name = "HACR_EL2", .state = ARM_CP_STATE_BOTH,
|
|
.opc0 = 3, .opc1 = 4, .crn = 1, .crm = 1, .opc2 = 7,
|
|
.access = PL2_RW, .type = ARM_CP_CONST, .resetvalue = 0 },
|
|
{ .name = "ESR_EL2", .state = ARM_CP_STATE_BOTH,
|
|
.opc0 = 3, .opc1 = 4, .crn = 5, .crm = 2, .opc2 = 0,
|
|
.access = PL2_RW,
|
|
.type = ARM_CP_CONST, .resetvalue = 0 },
|
|
{ .name = "CPTR_EL2", .state = ARM_CP_STATE_BOTH,
|
|
.opc0 = 3, .opc1 = 4, .crn = 1, .crm = 1, .opc2 = 2,
|
|
.access = PL2_RW, .type = ARM_CP_CONST, .resetvalue = 0 },
|
|
{ .name = "MAIR_EL2", .state = ARM_CP_STATE_BOTH,
|
|
.opc0 = 3, .opc1 = 4, .crn = 10, .crm = 2, .opc2 = 0,
|
|
.access = PL2_RW, .type = ARM_CP_CONST,
|
|
.resetvalue = 0 },
|
|
{ .name = "HMAIR1", .state = ARM_CP_STATE_AA32,
|
|
.cp = 15, .opc1 = 4, .crn = 10, .crm = 2, .opc2 = 1,
|
|
.access = PL2_RW, .type = ARM_CP_CONST, .resetvalue = 0 },
|
|
{ .name = "AMAIR_EL2", .state = ARM_CP_STATE_BOTH,
|
|
.opc0 = 3, .opc1 = 4, .crn = 10, .crm = 3, .opc2 = 0,
|
|
.access = PL2_RW, .type = ARM_CP_CONST,
|
|
.resetvalue = 0 },
|
|
{ .name = "HAMAIR1", .state = ARM_CP_STATE_AA32,
|
|
.cp = 15, .opc1 = 4, .crn = 10, .crm = 3, .opc2 = 1,
|
|
.access = PL2_RW, .type = ARM_CP_CONST,
|
|
.resetvalue = 0 },
|
|
{ .name = "AFSR0_EL2", .state = ARM_CP_STATE_BOTH,
|
|
.opc0 = 3, .opc1 = 4, .crn = 5, .crm = 1, .opc2 = 0,
|
|
.access = PL2_RW, .type = ARM_CP_CONST,
|
|
.resetvalue = 0 },
|
|
{ .name = "AFSR1_EL2", .state = ARM_CP_STATE_BOTH,
|
|
.opc0 = 3, .opc1 = 4, .crn = 5, .crm = 1, .opc2 = 1,
|
|
.access = PL2_RW, .type = ARM_CP_CONST,
|
|
.resetvalue = 0 },
|
|
{ .name = "TCR_EL2", .state = ARM_CP_STATE_BOTH,
|
|
.opc0 = 3, .opc1 = 4, .crn = 2, .crm = 0, .opc2 = 2,
|
|
.access = PL2_RW, .type = ARM_CP_CONST, .resetvalue = 0 },
|
|
{ .name = "VTCR_EL2", .state = ARM_CP_STATE_BOTH,
|
|
.opc0 = 3, .opc1 = 4, .crn = 2, .crm = 1, .opc2 = 2,
|
|
.access = PL2_RW, .accessfn = access_el3_aa32ns_aa64any,
|
|
.type = ARM_CP_CONST, .resetvalue = 0 },
|
|
{ .name = "VTTBR", .state = ARM_CP_STATE_AA32,
|
|
.cp = 15, .opc1 = 6, .crm = 2,
|
|
.access = PL2_RW, .accessfn = access_el3_aa32ns,
|
|
.type = ARM_CP_CONST | ARM_CP_64BIT, .resetvalue = 0 },
|
|
{ .name = "VTTBR_EL2", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 3, .opc1 = 4, .crn = 2, .crm = 1, .opc2 = 0,
|
|
.access = PL2_RW, .type = ARM_CP_CONST, .resetvalue = 0 },
|
|
{ .name = "SCTLR_EL2", .state = ARM_CP_STATE_BOTH,
|
|
.opc0 = 3, .opc1 = 4, .crn = 1, .crm = 0, .opc2 = 0,
|
|
.access = PL2_RW, .type = ARM_CP_CONST, .resetvalue = 0 },
|
|
{ .name = "TPIDR_EL2", .state = ARM_CP_STATE_BOTH,
|
|
.opc0 = 3, .opc1 = 4, .crn = 13, .crm = 0, .opc2 = 2,
|
|
.access = PL2_RW, .type = ARM_CP_CONST, .resetvalue = 0 },
|
|
{ .name = "TTBR0_EL2", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 3, .opc1 = 4, .crn = 2, .crm = 0, .opc2 = 0,
|
|
.access = PL2_RW, .type = ARM_CP_CONST, .resetvalue = 0 },
|
|
{ .name = "HTTBR", .cp = 15, .opc1 = 4, .crm = 2,
|
|
.access = PL2_RW, .type = ARM_CP_64BIT | ARM_CP_CONST,
|
|
.resetvalue = 0 },
|
|
{ .name = "CNTHCTL_EL2", .state = ARM_CP_STATE_BOTH,
|
|
.opc0 = 3, .opc1 = 4, .crn = 14, .crm = 1, .opc2 = 0,
|
|
.access = PL2_RW, .type = ARM_CP_CONST, .resetvalue = 0 },
|
|
{ .name = "CNTVOFF_EL2", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 3, .opc1 = 4, .crn = 14, .crm = 0, .opc2 = 3,
|
|
.access = PL2_RW, .type = ARM_CP_CONST, .resetvalue = 0 },
|
|
{ .name = "CNTVOFF", .cp = 15, .opc1 = 4, .crm = 14,
|
|
.access = PL2_RW, .type = ARM_CP_64BIT | ARM_CP_CONST,
|
|
.resetvalue = 0 },
|
|
{ .name = "CNTHP_CVAL_EL2", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 3, .opc1 = 4, .crn = 14, .crm = 2, .opc2 = 2,
|
|
.access = PL2_RW, .type = ARM_CP_CONST, .resetvalue = 0 },
|
|
{ .name = "CNTHP_CVAL", .cp = 15, .opc1 = 6, .crm = 14,
|
|
.access = PL2_RW, .type = ARM_CP_64BIT | ARM_CP_CONST,
|
|
.resetvalue = 0 },
|
|
{ .name = "CNTHP_TVAL_EL2", .state = ARM_CP_STATE_BOTH,
|
|
.opc0 = 3, .opc1 = 4, .crn = 14, .crm = 2, .opc2 = 0,
|
|
.access = PL2_RW, .type = ARM_CP_CONST, .resetvalue = 0 },
|
|
{ .name = "CNTHP_CTL_EL2", .state = ARM_CP_STATE_BOTH,
|
|
.opc0 = 3, .opc1 = 4, .crn = 14, .crm = 2, .opc2 = 1,
|
|
.access = PL2_RW, .type = ARM_CP_CONST, .resetvalue = 0 },
|
|
{ .name = "MDCR_EL2", .state = ARM_CP_STATE_BOTH,
|
|
.opc0 = 3, .opc1 = 4, .crn = 1, .crm = 1, .opc2 = 1,
|
|
.access = PL2_RW, .accessfn = access_tda,
|
|
.type = ARM_CP_CONST, .resetvalue = 0 },
|
|
{ .name = "HPFAR_EL2", .state = ARM_CP_STATE_BOTH,
|
|
.opc0 = 3, .opc1 = 4, .crn = 6, .crm = 0, .opc2 = 4,
|
|
.access = PL2_RW, .accessfn = access_el3_aa32ns_aa64any,
|
|
.type = ARM_CP_CONST, .resetvalue = 0 },
|
|
{ .name = "HSTR_EL2", .state = ARM_CP_STATE_BOTH,
|
|
.opc0 = 3, .opc1 = 4, .crn = 1, .crm = 1, .opc2 = 3,
|
|
.access = PL2_RW, .type = ARM_CP_CONST, .resetvalue = 0 },
|
|
{ .name = "FAR_EL2", .state = ARM_CP_STATE_BOTH,
|
|
.opc0 = 3, .opc1 = 4, .crn = 6, .crm = 0, .opc2 = 0,
|
|
.access = PL2_RW, .type = ARM_CP_CONST, .resetvalue = 0 },
|
|
{ .name = "HIFAR", .state = ARM_CP_STATE_AA32,
|
|
.type = ARM_CP_CONST,
|
|
.cp = 15, .opc1 = 4, .crn = 6, .crm = 0, .opc2 = 2,
|
|
.access = PL2_RW, .resetvalue = 0 },
|
|
REGINFO_SENTINEL
|
|
};
|
|
|
|
/* Ditto, but for registers which exist in ARMv8 but not v7 */
|
|
static const ARMCPRegInfo el3_no_el2_v8_cp_reginfo[] = {
|
|
{ .name = "HCR2", .state = ARM_CP_STATE_AA32,
|
|
.cp = 15, .opc1 = 4, .crn = 1, .crm = 1, .opc2 = 4,
|
|
.access = PL2_RW,
|
|
.type = ARM_CP_CONST, .resetvalue = 0 },
|
|
REGINFO_SENTINEL
|
|
};
|
|
|
|
static void hcr_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t value)
|
|
{
|
|
ARMCPU *cpu = env_archcpu(env);
|
|
/* Begin with bits defined in base ARMv8.0. */
|
|
uint64_t valid_mask = MAKE_64BIT_MASK(0, 34);
|
|
|
|
if (arm_feature(env, ARM_FEATURE_EL3)) {
|
|
valid_mask &= ~HCR_HCD;
|
|
} else if (cpu->psci_conduit != QEMU_PSCI_CONDUIT_SMC) {
|
|
/* Architecturally HCR.TSC is RES0 if EL3 is not implemented.
|
|
* However, if we're using the SMC PSCI conduit then QEMU is
|
|
* effectively acting like EL3 firmware and so the guest at
|
|
* EL2 should retain the ability to prevent EL1 from being
|
|
* able to make SMC calls into the ersatz firmware, so in
|
|
* that case HCR.TSC should be read/write.
|
|
*/
|
|
valid_mask &= ~HCR_TSC;
|
|
}
|
|
if (cpu_isar_feature(aa64_vh, cpu)) {
|
|
valid_mask |= HCR_E2H;
|
|
}
|
|
if (cpu_isar_feature(aa64_lor, cpu)) {
|
|
valid_mask |= HCR_TLOR;
|
|
}
|
|
if (cpu_isar_feature(aa64_pauth, cpu)) {
|
|
valid_mask |= HCR_API | HCR_APK;
|
|
}
|
|
|
|
/* Clear RES0 bits. */
|
|
value &= valid_mask;
|
|
|
|
/* These bits change the MMU setup:
|
|
* HCR_VM enables stage 2 translation
|
|
* HCR_PTW forbids certain page-table setups
|
|
* HCR_DC Disables stage1 and enables stage2 translation
|
|
*/
|
|
if ((env->cp15.hcr_el2 ^ value) & (HCR_VM | HCR_PTW | HCR_DC)) {
|
|
tlb_flush(CPU(cpu));
|
|
}
|
|
env->cp15.hcr_el2 = value;
|
|
|
|
/*
|
|
* Updates to VI and VF require us to update the status of
|
|
* virtual interrupts, which are the logical OR of these bits
|
|
* and the state of the input lines from the GIC. (This requires
|
|
* that we have the iothread lock, which is done by marking the
|
|
* reginfo structs as ARM_CP_IO.)
|
|
* Note that if a write to HCR pends a VIRQ or VFIQ it is never
|
|
* possible for it to be taken immediately, because VIRQ and
|
|
* VFIQ are masked unless running at EL0 or EL1, and HCR
|
|
* can only be written at EL2.
|
|
*/
|
|
g_assert(qemu_mutex_iothread_locked());
|
|
arm_cpu_update_virq(cpu);
|
|
arm_cpu_update_vfiq(cpu);
|
|
}
|
|
|
|
static void hcr_writehigh(CPUARMState *env, const ARMCPRegInfo *ri,
|
|
uint64_t value)
|
|
{
|
|
/* Handle HCR2 write, i.e. write to high half of HCR_EL2 */
|
|
value = deposit64(env->cp15.hcr_el2, 32, 32, value);
|
|
hcr_write(env, NULL, value);
|
|
}
|
|
|
|
static void hcr_writelow(CPUARMState *env, const ARMCPRegInfo *ri,
|
|
uint64_t value)
|
|
{
|
|
/* Handle HCR write, i.e. write to low half of HCR_EL2 */
|
|
value = deposit64(env->cp15.hcr_el2, 0, 32, value);
|
|
hcr_write(env, NULL, value);
|
|
}
|
|
|
|
/*
|
|
* Return the effective value of HCR_EL2.
|
|
* Bits that are not included here:
|
|
* RW (read from SCR_EL3.RW as needed)
|
|
*/
|
|
uint64_t arm_hcr_el2_eff(CPUARMState *env)
|
|
{
|
|
uint64_t ret = env->cp15.hcr_el2;
|
|
|
|
if (arm_is_secure_below_el3(env)) {
|
|
/*
|
|
* "This register has no effect if EL2 is not enabled in the
|
|
* current Security state". This is ARMv8.4-SecEL2 speak for
|
|
* !(SCR_EL3.NS==1 || SCR_EL3.EEL2==1).
|
|
*
|
|
* Prior to that, the language was "In an implementation that
|
|
* includes EL3, when the value of SCR_EL3.NS is 0 the PE behaves
|
|
* as if this field is 0 for all purposes other than a direct
|
|
* read or write access of HCR_EL2". With lots of enumeration
|
|
* on a per-field basis. In current QEMU, this is condition
|
|
* is arm_is_secure_below_el3.
|
|
*
|
|
* Since the v8.4 language applies to the entire register, and
|
|
* appears to be backward compatible, use that.
|
|
*/
|
|
ret = 0;
|
|
} else if (ret & HCR_TGE) {
|
|
/* These bits are up-to-date as of ARMv8.4. */
|
|
if (ret & HCR_E2H) {
|
|
ret &= ~(HCR_VM | HCR_FMO | HCR_IMO | HCR_AMO |
|
|
HCR_BSU_MASK | HCR_DC | HCR_TWI | HCR_TWE |
|
|
HCR_TID0 | HCR_TID2 | HCR_TPCP | HCR_TPU |
|
|
HCR_TDZ | HCR_CD | HCR_ID | HCR_MIOCNCE);
|
|
} else {
|
|
ret |= HCR_FMO | HCR_IMO | HCR_AMO;
|
|
}
|
|
ret &= ~(HCR_SWIO | HCR_PTW | HCR_VF | HCR_VI | HCR_VSE |
|
|
HCR_FB | HCR_TID1 | HCR_TID3 | HCR_TSC | HCR_TACR |
|
|
HCR_TSW | HCR_TTLB | HCR_TVM | HCR_HCD | HCR_TRVM |
|
|
HCR_TLOR);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void cptr_el2_write(CPUARMState *env, const ARMCPRegInfo *ri,
|
|
uint64_t value)
|
|
{
|
|
/*
|
|
* For A-profile AArch32 EL3, if NSACR.CP10
|
|
* is 0 then HCPTR.{TCP11,TCP10} ignore writes and read as 1.
|
|
*/
|
|
if (arm_feature(env, ARM_FEATURE_EL3) && !arm_el_is_aa64(env, 3) &&
|
|
!arm_is_secure(env) && !extract32(env->cp15.nsacr, 10, 1)) {
|
|
value &= ~(0x3 << 10);
|
|
value |= env->cp15.cptr_el[2] & (0x3 << 10);
|
|
}
|
|
env->cp15.cptr_el[2] = value;
|
|
}
|
|
|
|
static uint64_t cptr_el2_read(CPUARMState *env, const ARMCPRegInfo *ri)
|
|
{
|
|
/*
|
|
* For A-profile AArch32 EL3, if NSACR.CP10
|
|
* is 0 then HCPTR.{TCP11,TCP10} ignore writes and read as 1.
|
|
*/
|
|
uint64_t value = env->cp15.cptr_el[2];
|
|
|
|
if (arm_feature(env, ARM_FEATURE_EL3) && !arm_el_is_aa64(env, 3) &&
|
|
!arm_is_secure(env) && !extract32(env->cp15.nsacr, 10, 1)) {
|
|
value |= 0x3 << 10;
|
|
}
|
|
return value;
|
|
}
|
|
|
|
static const ARMCPRegInfo el2_cp_reginfo[] = {
|
|
{ .name = "HCR_EL2", .state = ARM_CP_STATE_AA64,
|
|
.type = ARM_CP_IO,
|
|
.opc0 = 3, .opc1 = 4, .crn = 1, .crm = 1, .opc2 = 0,
|
|
.access = PL2_RW, .fieldoffset = offsetof(CPUARMState, cp15.hcr_el2),
|
|
.writefn = hcr_write },
|
|
{ .name = "HCR", .state = ARM_CP_STATE_AA32,
|
|
.type = ARM_CP_ALIAS | ARM_CP_IO,
|
|
.cp = 15, .opc1 = 4, .crn = 1, .crm = 1, .opc2 = 0,
|
|
.access = PL2_RW, .fieldoffset = offsetof(CPUARMState, cp15.hcr_el2),
|
|
.writefn = hcr_writelow },
|
|
{ .name = "HACR_EL2", .state = ARM_CP_STATE_BOTH,
|
|
.opc0 = 3, .opc1 = 4, .crn = 1, .crm = 1, .opc2 = 7,
|
|
.access = PL2_RW, .type = ARM_CP_CONST, .resetvalue = 0 },
|
|
{ .name = "ELR_EL2", .state = ARM_CP_STATE_AA64,
|
|
.type = ARM_CP_ALIAS,
|
|
.opc0 = 3, .opc1 = 4, .crn = 4, .crm = 0, .opc2 = 1,
|
|
.access = PL2_RW,
|
|
.fieldoffset = offsetof(CPUARMState, elr_el[2]) },
|
|
{ .name = "ESR_EL2", .state = ARM_CP_STATE_BOTH,
|
|
.opc0 = 3, .opc1 = 4, .crn = 5, .crm = 2, .opc2 = 0,
|
|
.access = PL2_RW, .fieldoffset = offsetof(CPUARMState, cp15.esr_el[2]) },
|
|
{ .name = "FAR_EL2", .state = ARM_CP_STATE_BOTH,
|
|
.opc0 = 3, .opc1 = 4, .crn = 6, .crm = 0, .opc2 = 0,
|
|
.access = PL2_RW, .fieldoffset = offsetof(CPUARMState, cp15.far_el[2]) },
|
|
{ .name = "HIFAR", .state = ARM_CP_STATE_AA32,
|
|
.type = ARM_CP_ALIAS,
|
|
.cp = 15, .opc1 = 4, .crn = 6, .crm = 0, .opc2 = 2,
|
|
.access = PL2_RW,
|
|
.fieldoffset = offsetofhigh32(CPUARMState, cp15.far_el[2]) },
|
|
{ .name = "SPSR_EL2", .state = ARM_CP_STATE_AA64,
|
|
.type = ARM_CP_ALIAS,
|
|
.opc0 = 3, .opc1 = 4, .crn = 4, .crm = 0, .opc2 = 0,
|
|
.access = PL2_RW,
|
|
.fieldoffset = offsetof(CPUARMState, banked_spsr[BANK_HYP]) },
|
|
{ .name = "VBAR_EL2", .state = ARM_CP_STATE_BOTH,
|
|
.opc0 = 3, .opc1 = 4, .crn = 12, .crm = 0, .opc2 = 0,
|
|
.access = PL2_RW, .writefn = vbar_write,
|
|
.fieldoffset = offsetof(CPUARMState, cp15.vbar_el[2]),
|
|
.resetvalue = 0 },
|
|
{ .name = "SP_EL2", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 3, .opc1 = 6, .crn = 4, .crm = 1, .opc2 = 0,
|
|
.access = PL3_RW, .type = ARM_CP_ALIAS,
|
|
.fieldoffset = offsetof(CPUARMState, sp_el[2]) },
|
|
{ .name = "CPTR_EL2", .state = ARM_CP_STATE_BOTH,
|
|
.opc0 = 3, .opc1 = 4, .crn = 1, .crm = 1, .opc2 = 2,
|
|
.access = PL2_RW, .accessfn = cptr_access, .resetvalue = 0,
|
|
.fieldoffset = offsetof(CPUARMState, cp15.cptr_el[2]),
|
|
.readfn = cptr_el2_read, .writefn = cptr_el2_write },
|
|
{ .name = "MAIR_EL2", .state = ARM_CP_STATE_BOTH,
|
|
.opc0 = 3, .opc1 = 4, .crn = 10, .crm = 2, .opc2 = 0,
|
|
.access = PL2_RW, .fieldoffset = offsetof(CPUARMState, cp15.mair_el[2]),
|
|
.resetvalue = 0 },
|
|
{ .name = "HMAIR1", .state = ARM_CP_STATE_AA32,
|
|
.cp = 15, .opc1 = 4, .crn = 10, .crm = 2, .opc2 = 1,
|
|
.access = PL2_RW, .type = ARM_CP_ALIAS,
|
|
.fieldoffset = offsetofhigh32(CPUARMState, cp15.mair_el[2]) },
|
|
{ .name = "AMAIR_EL2", .state = ARM_CP_STATE_BOTH,
|
|
.opc0 = 3, .opc1 = 4, .crn = 10, .crm = 3, .opc2 = 0,
|
|
.access = PL2_RW, .type = ARM_CP_CONST,
|
|
.resetvalue = 0 },
|
|
/* HAMAIR1 is mapped to AMAIR_EL2[63:32] */
|
|
{ .name = "HAMAIR1", .state = ARM_CP_STATE_AA32,
|
|
.cp = 15, .opc1 = 4, .crn = 10, .crm = 3, .opc2 = 1,
|
|
.access = PL2_RW, .type = ARM_CP_CONST,
|
|
.resetvalue = 0 },
|
|
{ .name = "AFSR0_EL2", .state = ARM_CP_STATE_BOTH,
|
|
.opc0 = 3, .opc1 = 4, .crn = 5, .crm = 1, .opc2 = 0,
|
|
.access = PL2_RW, .type = ARM_CP_CONST,
|
|
.resetvalue = 0 },
|
|
{ .name = "AFSR1_EL2", .state = ARM_CP_STATE_BOTH,
|
|
.opc0 = 3, .opc1 = 4, .crn = 5, .crm = 1, .opc2 = 1,
|
|
.access = PL2_RW, .type = ARM_CP_CONST,
|
|
.resetvalue = 0 },
|
|
{ .name = "TCR_EL2", .state = ARM_CP_STATE_BOTH,
|
|
.opc0 = 3, .opc1 = 4, .crn = 2, .crm = 0, .opc2 = 2,
|
|
.access = PL2_RW, .writefn = vmsa_tcr_el12_write,
|
|
/* no .raw_writefn or .resetfn needed as we never use mask/base_mask */
|
|
.fieldoffset = offsetof(CPUARMState, cp15.tcr_el[2]) },
|
|
{ .name = "VTCR", .state = ARM_CP_STATE_AA32,
|
|
.cp = 15, .opc1 = 4, .crn = 2, .crm = 1, .opc2 = 2,
|
|
.type = ARM_CP_ALIAS,
|
|
.access = PL2_RW, .accessfn = access_el3_aa32ns,
|
|
.fieldoffset = offsetof(CPUARMState, cp15.vtcr_el2) },
|
|
{ .name = "VTCR_EL2", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 3, .opc1 = 4, .crn = 2, .crm = 1, .opc2 = 2,
|
|
.access = PL2_RW,
|
|
/* no .writefn needed as this can't cause an ASID change;
|
|
* no .raw_writefn or .resetfn needed as we never use mask/base_mask
|
|
*/
|
|
.fieldoffset = offsetof(CPUARMState, cp15.vtcr_el2) },
|
|
{ .name = "VTTBR", .state = ARM_CP_STATE_AA32,
|
|
.cp = 15, .opc1 = 6, .crm = 2,
|
|
.type = ARM_CP_64BIT | ARM_CP_ALIAS,
|
|
.access = PL2_RW, .accessfn = access_el3_aa32ns,
|
|
.fieldoffset = offsetof(CPUARMState, cp15.vttbr_el2),
|
|
.writefn = vttbr_write },
|
|
{ .name = "VTTBR_EL2", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 3, .opc1 = 4, .crn = 2, .crm = 1, .opc2 = 0,
|
|
.access = PL2_RW, .writefn = vttbr_write,
|
|
.fieldoffset = offsetof(CPUARMState, cp15.vttbr_el2) },
|
|
{ .name = "SCTLR_EL2", .state = ARM_CP_STATE_BOTH,
|
|
.opc0 = 3, .opc1 = 4, .crn = 1, .crm = 0, .opc2 = 0,
|
|
.access = PL2_RW, .raw_writefn = raw_write, .writefn = sctlr_write,
|
|
.fieldoffset = offsetof(CPUARMState, cp15.sctlr_el[2]) },
|
|
{ .name = "TPIDR_EL2", .state = ARM_CP_STATE_BOTH,
|
|
.opc0 = 3, .opc1 = 4, .crn = 13, .crm = 0, .opc2 = 2,
|
|
.access = PL2_RW, .resetvalue = 0,
|
|
.fieldoffset = offsetof(CPUARMState, cp15.tpidr_el[2]) },
|
|
{ .name = "TTBR0_EL2", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 3, .opc1 = 4, .crn = 2, .crm = 0, .opc2 = 0,
|
|
.access = PL2_RW, .resetvalue = 0, .writefn = vmsa_tcr_ttbr_el2_write,
|
|
.fieldoffset = offsetof(CPUARMState, cp15.ttbr0_el[2]) },
|
|
{ .name = "HTTBR", .cp = 15, .opc1 = 4, .crm = 2,
|
|
.access = PL2_RW, .type = ARM_CP_64BIT | ARM_CP_ALIAS,
|
|
.fieldoffset = offsetof(CPUARMState, cp15.ttbr0_el[2]) },
|
|
{ .name = "TLBIALLNSNH",
|
|
.cp = 15, .opc1 = 4, .crn = 8, .crm = 7, .opc2 = 4,
|
|
.type = ARM_CP_NO_RAW, .access = PL2_W,
|
|
.writefn = tlbiall_nsnh_write },
|
|
{ .name = "TLBIALLNSNHIS",
|
|
.cp = 15, .opc1 = 4, .crn = 8, .crm = 3, .opc2 = 4,
|
|
.type = ARM_CP_NO_RAW, .access = PL2_W,
|
|
.writefn = tlbiall_nsnh_is_write },
|
|
{ .name = "TLBIALLH", .cp = 15, .opc1 = 4, .crn = 8, .crm = 7, .opc2 = 0,
|
|
.type = ARM_CP_NO_RAW, .access = PL2_W,
|
|
.writefn = tlbiall_hyp_write },
|
|
{ .name = "TLBIALLHIS", .cp = 15, .opc1 = 4, .crn = 8, .crm = 3, .opc2 = 0,
|
|
.type = ARM_CP_NO_RAW, .access = PL2_W,
|
|
.writefn = tlbiall_hyp_is_write },
|
|
{ .name = "TLBIMVAH", .cp = 15, .opc1 = 4, .crn = 8, .crm = 7, .opc2 = 1,
|
|
.type = ARM_CP_NO_RAW, .access = PL2_W,
|
|
.writefn = tlbimva_hyp_write },
|
|
{ .name = "TLBIMVAHIS", .cp = 15, .opc1 = 4, .crn = 8, .crm = 3, .opc2 = 1,
|
|
.type = ARM_CP_NO_RAW, .access = PL2_W,
|
|
.writefn = tlbimva_hyp_is_write },
|
|
{ .name = "TLBI_ALLE2", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 1, .opc1 = 4, .crn = 8, .crm = 7, .opc2 = 0,
|
|
.type = ARM_CP_NO_RAW, .access = PL2_W,
|
|
.writefn = tlbi_aa64_alle2_write },
|
|
{ .name = "TLBI_VAE2", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 1, .opc1 = 4, .crn = 8, .crm = 7, .opc2 = 1,
|
|
.type = ARM_CP_NO_RAW, .access = PL2_W,
|
|
.writefn = tlbi_aa64_vae2_write },
|
|
{ .name = "TLBI_VALE2", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 1, .opc1 = 4, .crn = 8, .crm = 7, .opc2 = 5,
|
|
.access = PL2_W, .type = ARM_CP_NO_RAW,
|
|
.writefn = tlbi_aa64_vae2_write },
|
|
{ .name = "TLBI_ALLE2IS", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 1, .opc1 = 4, .crn = 8, .crm = 3, .opc2 = 0,
|
|
.access = PL2_W, .type = ARM_CP_NO_RAW,
|
|
.writefn = tlbi_aa64_alle2is_write },
|
|
{ .name = "TLBI_VAE2IS", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 1, .opc1 = 4, .crn = 8, .crm = 3, .opc2 = 1,
|
|
.type = ARM_CP_NO_RAW, .access = PL2_W,
|
|
.writefn = tlbi_aa64_vae2is_write },
|
|
{ .name = "TLBI_VALE2IS", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 1, .opc1 = 4, .crn = 8, .crm = 3, .opc2 = 5,
|
|
.access = PL2_W, .type = ARM_CP_NO_RAW,
|
|
.writefn = tlbi_aa64_vae2is_write },
|
|
#ifndef CONFIG_USER_ONLY
|
|
/* Unlike the other EL2-related AT operations, these must
|
|
* UNDEF from EL3 if EL2 is not implemented, which is why we
|
|
* define them here rather than with the rest of the AT ops.
|
|
*/
|
|
{ .name = "AT_S1E2R", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 1, .opc1 = 4, .crn = 7, .crm = 8, .opc2 = 0,
|
|
.access = PL2_W, .accessfn = at_s1e2_access,
|
|
.type = ARM_CP_NO_RAW | ARM_CP_RAISES_EXC, .writefn = ats_write64 },
|
|
{ .name = "AT_S1E2W", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 1, .opc1 = 4, .crn = 7, .crm = 8, .opc2 = 1,
|
|
.access = PL2_W, .accessfn = at_s1e2_access,
|
|
.type = ARM_CP_NO_RAW | ARM_CP_RAISES_EXC, .writefn = ats_write64 },
|
|
/* The AArch32 ATS1H* operations are CONSTRAINED UNPREDICTABLE
|
|
* if EL2 is not implemented; we choose to UNDEF. Behaviour at EL3
|
|
* with SCR.NS == 0 outside Monitor mode is UNPREDICTABLE; we choose
|
|
* to behave as if SCR.NS was 1.
|
|
*/
|
|
{ .name = "ATS1HR", .cp = 15, .opc1 = 4, .crn = 7, .crm = 8, .opc2 = 0,
|
|
.access = PL2_W,
|
|
.writefn = ats1h_write, .type = ARM_CP_NO_RAW | ARM_CP_RAISES_EXC },
|
|
{ .name = "ATS1HW", .cp = 15, .opc1 = 4, .crn = 7, .crm = 8, .opc2 = 1,
|
|
.access = PL2_W,
|
|
.writefn = ats1h_write, .type = ARM_CP_NO_RAW | ARM_CP_RAISES_EXC },
|
|
{ .name = "CNTHCTL_EL2", .state = ARM_CP_STATE_BOTH,
|
|
.opc0 = 3, .opc1 = 4, .crn = 14, .crm = 1, .opc2 = 0,
|
|
/* ARMv7 requires bit 0 and 1 to reset to 1. ARMv8 defines the
|
|
* reset values as IMPDEF. We choose to reset to 3 to comply with
|
|
* both ARMv7 and ARMv8.
|
|
*/
|
|
.access = PL2_RW, .resetvalue = 3,
|
|
.fieldoffset = offsetof(CPUARMState, cp15.cnthctl_el2) },
|
|
{ .name = "CNTVOFF_EL2", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 3, .opc1 = 4, .crn = 14, .crm = 0, .opc2 = 3,
|
|
.access = PL2_RW, .type = ARM_CP_IO, .resetvalue = 0,
|
|
.writefn = gt_cntvoff_write,
|
|
.fieldoffset = offsetof(CPUARMState, cp15.cntvoff_el2) },
|
|
{ .name = "CNTVOFF", .cp = 15, .opc1 = 4, .crm = 14,
|
|
.access = PL2_RW, .type = ARM_CP_64BIT | ARM_CP_ALIAS | ARM_CP_IO,
|
|
.writefn = gt_cntvoff_write,
|
|
.fieldoffset = offsetof(CPUARMState, cp15.cntvoff_el2) },
|
|
{ .name = "CNTHP_CVAL_EL2", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 3, .opc1 = 4, .crn = 14, .crm = 2, .opc2 = 2,
|
|
.fieldoffset = offsetof(CPUARMState, cp15.c14_timer[GTIMER_HYP].cval),
|
|
.type = ARM_CP_IO, .access = PL2_RW,
|
|
.writefn = gt_hyp_cval_write, .raw_writefn = raw_write },
|
|
{ .name = "CNTHP_CVAL", .cp = 15, .opc1 = 6, .crm = 14,
|
|
.fieldoffset = offsetof(CPUARMState, cp15.c14_timer[GTIMER_HYP].cval),
|
|
.access = PL2_RW, .type = ARM_CP_64BIT | ARM_CP_IO,
|
|
.writefn = gt_hyp_cval_write, .raw_writefn = raw_write },
|
|
{ .name = "CNTHP_TVAL_EL2", .state = ARM_CP_STATE_BOTH,
|
|
.opc0 = 3, .opc1 = 4, .crn = 14, .crm = 2, .opc2 = 0,
|
|
.type = ARM_CP_NO_RAW | ARM_CP_IO, .access = PL2_RW,
|
|
.resetfn = gt_hyp_timer_reset,
|
|
.readfn = gt_hyp_tval_read, .writefn = gt_hyp_tval_write },
|
|
{ .name = "CNTHP_CTL_EL2", .state = ARM_CP_STATE_BOTH,
|
|
.type = ARM_CP_IO,
|
|
.opc0 = 3, .opc1 = 4, .crn = 14, .crm = 2, .opc2 = 1,
|
|
.access = PL2_RW,
|
|
.fieldoffset = offsetof(CPUARMState, cp15.c14_timer[GTIMER_HYP].ctl),
|
|
.resetvalue = 0,
|
|
.writefn = gt_hyp_ctl_write, .raw_writefn = raw_write },
|
|
#endif
|
|
/* The only field of MDCR_EL2 that has a defined architectural reset value
|
|
* is MDCR_EL2.HPMN which should reset to the value of PMCR_EL0.N; but we
|
|
* don't implement any PMU event counters, so using zero as a reset
|
|
* value for MDCR_EL2 is okay
|
|
*/
|
|
{ .name = "MDCR_EL2", .state = ARM_CP_STATE_BOTH,
|
|
.opc0 = 3, .opc1 = 4, .crn = 1, .crm = 1, .opc2 = 1,
|
|
.access = PL2_RW, .resetvalue = 0,
|
|
.fieldoffset = offsetof(CPUARMState, cp15.mdcr_el2), },
|
|
{ .name = "HPFAR", .state = ARM_CP_STATE_AA32,
|
|
.cp = 15, .opc1 = 4, .crn = 6, .crm = 0, .opc2 = 4,
|
|
.access = PL2_RW, .accessfn = access_el3_aa32ns,
|
|
.fieldoffset = offsetof(CPUARMState, cp15.hpfar_el2) },
|
|
{ .name = "HPFAR_EL2", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 3, .opc1 = 4, .crn = 6, .crm = 0, .opc2 = 4,
|
|
.access = PL2_RW,
|
|
.fieldoffset = offsetof(CPUARMState, cp15.hpfar_el2) },
|
|
{ .name = "HSTR_EL2", .state = ARM_CP_STATE_BOTH,
|
|
.cp = 15, .opc0 = 3, .opc1 = 4, .crn = 1, .crm = 1, .opc2 = 3,
|
|
.access = PL2_RW,
|
|
.fieldoffset = offsetof(CPUARMState, cp15.hstr_el2) },
|
|
REGINFO_SENTINEL
|
|
};
|
|
|
|
static const ARMCPRegInfo el2_v8_cp_reginfo[] = {
|
|
{ .name = "HCR2", .state = ARM_CP_STATE_AA32,
|
|
.type = ARM_CP_ALIAS | ARM_CP_IO,
|
|
.cp = 15, .opc1 = 4, .crn = 1, .crm = 1, .opc2 = 4,
|
|
.access = PL2_RW,
|
|
.fieldoffset = offsetofhigh32(CPUARMState, cp15.hcr_el2),
|
|
.writefn = hcr_writehigh },
|
|
REGINFO_SENTINEL
|
|
};
|
|
|
|
static CPAccessResult nsacr_access(CPUARMState *env, const ARMCPRegInfo *ri,
|
|
bool isread)
|
|
{
|
|
/* The NSACR is RW at EL3, and RO for NS EL1 and NS EL2.
|
|
* At Secure EL1 it traps to EL3.
|
|
*/
|
|
if (arm_current_el(env) == 3) {
|
|
return CP_ACCESS_OK;
|
|
}
|
|
if (arm_is_secure_below_el3(env)) {
|
|
return CP_ACCESS_TRAP_EL3;
|
|
}
|
|
/* Accesses from EL1 NS and EL2 NS are UNDEF for write but allow reads. */
|
|
if (isread) {
|
|
return CP_ACCESS_OK;
|
|
}
|
|
return CP_ACCESS_TRAP_UNCATEGORIZED;
|
|
}
|
|
|
|
static const ARMCPRegInfo el3_cp_reginfo[] = {
|
|
{ .name = "SCR_EL3", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 3, .opc1 = 6, .crn = 1, .crm = 1, .opc2 = 0,
|
|
.access = PL3_RW, .fieldoffset = offsetof(CPUARMState, cp15.scr_el3),
|
|
.resetvalue = 0, .writefn = scr_write },
|
|
{ .name = "SCR", .type = ARM_CP_ALIAS | ARM_CP_NEWEL,
|
|
.cp = 15, .opc1 = 0, .crn = 1, .crm = 1, .opc2 = 0,
|
|
.access = PL1_RW, .accessfn = access_trap_aa32s_el1,
|
|
.fieldoffset = offsetoflow32(CPUARMState, cp15.scr_el3),
|
|
.writefn = scr_write },
|
|
{ .name = "SDER32_EL3", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 3, .opc1 = 6, .crn = 1, .crm = 1, .opc2 = 1,
|
|
.access = PL3_RW, .resetvalue = 0,
|
|
.fieldoffset = offsetof(CPUARMState, cp15.sder) },
|
|
{ .name = "SDER",
|
|
.cp = 15, .opc1 = 0, .crn = 1, .crm = 1, .opc2 = 1,
|
|
.access = PL3_RW, .resetvalue = 0,
|
|
.fieldoffset = offsetoflow32(CPUARMState, cp15.sder) },
|
|
{ .name = "MVBAR", .cp = 15, .opc1 = 0, .crn = 12, .crm = 0, .opc2 = 1,
|
|
.access = PL1_RW, .accessfn = access_trap_aa32s_el1,
|
|
.writefn = vbar_write, .resetvalue = 0,
|
|
.fieldoffset = offsetof(CPUARMState, cp15.mvbar) },
|
|
{ .name = "TTBR0_EL3", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 3, .opc1 = 6, .crn = 2, .crm = 0, .opc2 = 0,
|
|
.access = PL3_RW, .resetvalue = 0,
|
|
.fieldoffset = offsetof(CPUARMState, cp15.ttbr0_el[3]) },
|
|
{ .name = "TCR_EL3", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 3, .opc1 = 6, .crn = 2, .crm = 0, .opc2 = 2,
|
|
.access = PL3_RW,
|
|
/* no .writefn needed as this can't cause an ASID change;
|
|
* we must provide a .raw_writefn and .resetfn because we handle
|
|
* reset and migration for the AArch32 TTBCR(S), which might be
|
|
* using mask and base_mask.
|
|
*/
|
|
.resetfn = vmsa_ttbcr_reset, .raw_writefn = vmsa_ttbcr_raw_write,
|
|
.fieldoffset = offsetof(CPUARMState, cp15.tcr_el[3]) },
|
|
{ .name = "ELR_EL3", .state = ARM_CP_STATE_AA64,
|
|
.type = ARM_CP_ALIAS,
|
|
.opc0 = 3, .opc1 = 6, .crn = 4, .crm = 0, .opc2 = 1,
|
|
.access = PL3_RW,
|
|
.fieldoffset = offsetof(CPUARMState, elr_el[3]) },
|
|
{ .name = "ESR_EL3", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 3, .opc1 = 6, .crn = 5, .crm = 2, .opc2 = 0,
|
|
.access = PL3_RW, .fieldoffset = offsetof(CPUARMState, cp15.esr_el[3]) },
|
|
{ .name = "FAR_EL3", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 3, .opc1 = 6, .crn = 6, .crm = 0, .opc2 = 0,
|
|
.access = PL3_RW, .fieldoffset = offsetof(CPUARMState, cp15.far_el[3]) },
|
|
{ .name = "SPSR_EL3", .state = ARM_CP_STATE_AA64,
|
|
.type = ARM_CP_ALIAS,
|
|
.opc0 = 3, .opc1 = 6, .crn = 4, .crm = 0, .opc2 = 0,
|
|
.access = PL3_RW,
|
|
.fieldoffset = offsetof(CPUARMState, banked_spsr[BANK_MON]) },
|
|
{ .name = "VBAR_EL3", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 3, .opc1 = 6, .crn = 12, .crm = 0, .opc2 = 0,
|
|
.access = PL3_RW, .writefn = vbar_write,
|
|
.fieldoffset = offsetof(CPUARMState, cp15.vbar_el[3]),
|
|
.resetvalue = 0 },
|
|
{ .name = "CPTR_EL3", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 3, .opc1 = 6, .crn = 1, .crm = 1, .opc2 = 2,
|
|
.access = PL3_RW, .accessfn = cptr_access, .resetvalue = 0,
|
|
.fieldoffset = offsetof(CPUARMState, cp15.cptr_el[3]) },
|
|
{ .name = "TPIDR_EL3", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 3, .opc1 = 6, .crn = 13, .crm = 0, .opc2 = 2,
|
|
.access = PL3_RW, .resetvalue = 0,
|
|
.fieldoffset = offsetof(CPUARMState, cp15.tpidr_el[3]) },
|
|
{ .name = "AMAIR_EL3", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 3, .opc1 = 6, .crn = 10, .crm = 3, .opc2 = 0,
|
|
.access = PL3_RW, .type = ARM_CP_CONST,
|
|
.resetvalue = 0 },
|
|
{ .name = "AFSR0_EL3", .state = ARM_CP_STATE_BOTH,
|
|
.opc0 = 3, .opc1 = 6, .crn = 5, .crm = 1, .opc2 = 0,
|
|
.access = PL3_RW, .type = ARM_CP_CONST,
|
|
.resetvalue = 0 },
|
|
{ .name = "AFSR1_EL3", .state = ARM_CP_STATE_BOTH,
|
|
.opc0 = 3, .opc1 = 6, .crn = 5, .crm = 1, .opc2 = 1,
|
|
.access = PL3_RW, .type = ARM_CP_CONST,
|
|
.resetvalue = 0 },
|
|
{ .name = "TLBI_ALLE3IS", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 1, .opc1 = 6, .crn = 8, .crm = 3, .opc2 = 0,
|
|
.access = PL3_W, .type = ARM_CP_NO_RAW,
|
|
.writefn = tlbi_aa64_alle3is_write },
|
|
{ .name = "TLBI_VAE3IS", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 1, .opc1 = 6, .crn = 8, .crm = 3, .opc2 = 1,
|
|
.access = PL3_W, .type = ARM_CP_NO_RAW,
|
|
.writefn = tlbi_aa64_vae3is_write },
|
|
{ .name = "TLBI_VALE3IS", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 1, .opc1 = 6, .crn = 8, .crm = 3, .opc2 = 5,
|
|
.access = PL3_W, .type = ARM_CP_NO_RAW,
|
|
.writefn = tlbi_aa64_vae3is_write },
|
|
{ .name = "TLBI_ALLE3", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 1, .opc1 = 6, .crn = 8, .crm = 7, .opc2 = 0,
|
|
.access = PL3_W, .type = ARM_CP_NO_RAW,
|
|
.writefn = tlbi_aa64_alle3_write },
|
|
{ .name = "TLBI_VAE3", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 1, .opc1 = 6, .crn = 8, .crm = 7, .opc2 = 1,
|
|
.access = PL3_W, .type = ARM_CP_NO_RAW,
|
|
.writefn = tlbi_aa64_vae3_write },
|
|
{ .name = "TLBI_VALE3", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 1, .opc1 = 6, .crn = 8, .crm = 7, .opc2 = 5,
|
|
.access = PL3_W, .type = ARM_CP_NO_RAW,
|
|
.writefn = tlbi_aa64_vae3_write },
|
|
REGINFO_SENTINEL
|
|
};
|
|
|
|
#ifndef CONFIG_USER_ONLY
|
|
/* Test if system register redirection is to occur in the current state. */
|
|
static bool redirect_for_e2h(CPUARMState *env)
|
|
{
|
|
return arm_current_el(env) == 2 && (arm_hcr_el2_eff(env) & HCR_E2H);
|
|
}
|
|
|
|
static uint64_t el2_e2h_read(CPUARMState *env, const ARMCPRegInfo *ri)
|
|
{
|
|
CPReadFn *readfn;
|
|
|
|
if (redirect_for_e2h(env)) {
|
|
/* Switch to the saved EL2 version of the register. */
|
|
ri = ri->opaque;
|
|
readfn = ri->readfn;
|
|
} else {
|
|
readfn = ri->orig_readfn;
|
|
}
|
|
if (readfn == NULL) {
|
|
readfn = raw_read;
|
|
}
|
|
return readfn(env, ri);
|
|
}
|
|
|
|
static void el2_e2h_write(CPUARMState *env, const ARMCPRegInfo *ri,
|
|
uint64_t value)
|
|
{
|
|
CPWriteFn *writefn;
|
|
|
|
if (redirect_for_e2h(env)) {
|
|
/* Switch to the saved EL2 version of the register. */
|
|
ri = ri->opaque;
|
|
writefn = ri->writefn;
|
|
} else {
|
|
writefn = ri->orig_writefn;
|
|
}
|
|
if (writefn == NULL) {
|
|
writefn = raw_write;
|
|
}
|
|
writefn(env, ri, value);
|
|
}
|
|
|
|
static void define_arm_vh_e2h_redirects_aliases(ARMCPU *cpu)
|
|
{
|
|
struct E2HAlias {
|
|
uint32_t src_key, dst_key, new_key;
|
|
const char *src_name, *dst_name, *new_name;
|
|
bool (*feature)(const ARMISARegisters *id);
|
|
};
|
|
|
|
#define K(op0, op1, crn, crm, op2) \
|
|
ENCODE_AA64_CP_REG(CP_REG_ARM64_SYSREG_CP, crn, crm, op0, op1, op2)
|
|
|
|
static const struct E2HAlias aliases[] = {
|
|
{ K(3, 0, 1, 0, 0), K(3, 4, 1, 0, 0), K(3, 5, 1, 0, 0),
|
|
"SCTLR", "SCTLR_EL2", "SCTLR_EL12" },
|
|
{ K(3, 0, 1, 0, 2), K(3, 4, 1, 1, 2), K(3, 5, 1, 0, 2),
|
|
"CPACR", "CPTR_EL2", "CPACR_EL12" },
|
|
{ K(3, 0, 2, 0, 0), K(3, 4, 2, 0, 0), K(3, 5, 2, 0, 0),
|
|
"TTBR0_EL1", "TTBR0_EL2", "TTBR0_EL12" },
|
|
{ K(3, 0, 2, 0, 1), K(3, 4, 2, 0, 1), K(3, 5, 2, 0, 1),
|
|
"TTBR1_EL1", "TTBR1_EL2", "TTBR1_EL12" },
|
|
{ K(3, 0, 2, 0, 2), K(3, 4, 2, 0, 2), K(3, 5, 2, 0, 2),
|
|
"TCR_EL1", "TCR_EL2", "TCR_EL12" },
|
|
{ K(3, 0, 4, 0, 0), K(3, 4, 4, 0, 0), K(3, 5, 4, 0, 0),
|
|
"SPSR_EL1", "SPSR_EL2", "SPSR_EL12" },
|
|
{ K(3, 0, 4, 0, 1), K(3, 4, 4, 0, 1), K(3, 5, 4, 0, 1),
|
|
"ELR_EL1", "ELR_EL2", "ELR_EL12" },
|
|
{ K(3, 0, 5, 1, 0), K(3, 4, 5, 1, 0), K(3, 5, 5, 1, 0),
|
|
"AFSR0_EL1", "AFSR0_EL2", "AFSR0_EL12" },
|
|
{ K(3, 0, 5, 1, 1), K(3, 4, 5, 1, 1), K(3, 5, 5, 1, 1),
|
|
"AFSR1_EL1", "AFSR1_EL2", "AFSR1_EL12" },
|
|
{ K(3, 0, 5, 2, 0), K(3, 4, 5, 2, 0), K(3, 5, 5, 2, 0),
|
|
"ESR_EL1", "ESR_EL2", "ESR_EL12" },
|
|
{ K(3, 0, 6, 0, 0), K(3, 4, 6, 0, 0), K(3, 5, 6, 0, 0),
|
|
"FAR_EL1", "FAR_EL2", "FAR_EL12" },
|
|
{ K(3, 0, 10, 2, 0), K(3, 4, 10, 2, 0), K(3, 5, 10, 2, 0),
|
|
"MAIR_EL1", "MAIR_EL2", "MAIR_EL12" },
|
|
{ K(3, 0, 10, 3, 0), K(3, 4, 10, 3, 0), K(3, 5, 10, 3, 0),
|
|
"AMAIR0", "AMAIR_EL2", "AMAIR_EL12" },
|
|
{ K(3, 0, 12, 0, 0), K(3, 4, 12, 0, 0), K(3, 5, 12, 0, 0),
|
|
"VBAR", "VBAR_EL2", "VBAR_EL12" },
|
|
{ K(3, 0, 13, 0, 1), K(3, 4, 13, 0, 1), K(3, 5, 13, 0, 1),
|
|
"CONTEXTIDR_EL1", "CONTEXTIDR_EL2", "CONTEXTIDR_EL12" },
|
|
{ K(3, 0, 14, 1, 0), K(3, 4, 14, 1, 0), K(3, 5, 14, 1, 0),
|
|
"CNTKCTL", "CNTHCTL_EL2", "CNTKCTL_EL12" },
|
|
|
|
/*
|
|
* Note that redirection of ZCR is mentioned in the description
|
|
* of ZCR_EL2, and aliasing in the description of ZCR_EL1, but
|
|
* not in the summary table.
|
|
*/
|
|
{ K(3, 0, 1, 2, 0), K(3, 4, 1, 2, 0), K(3, 5, 1, 2, 0),
|
|
"ZCR_EL1", "ZCR_EL2", "ZCR_EL12", isar_feature_aa64_sve },
|
|
|
|
/* TODO: ARMv8.2-SPE -- PMSCR_EL2 */
|
|
/* TODO: ARMv8.4-Trace -- TRFCR_EL2 */
|
|
};
|
|
#undef K
|
|
|
|
size_t i;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(aliases); i++) {
|
|
const struct E2HAlias *a = &aliases[i];
|
|
ARMCPRegInfo *src_reg, *dst_reg;
|
|
|
|
if (a->feature && !a->feature(&cpu->isar)) {
|
|
continue;
|
|
}
|
|
|
|
src_reg = g_hash_table_lookup(cpu->cp_regs, &a->src_key);
|
|
dst_reg = g_hash_table_lookup(cpu->cp_regs, &a->dst_key);
|
|
g_assert(src_reg != NULL);
|
|
g_assert(dst_reg != NULL);
|
|
|
|
/* Cross-compare names to detect typos in the keys. */
|
|
g_assert(strcmp(src_reg->name, a->src_name) == 0);
|
|
g_assert(strcmp(dst_reg->name, a->dst_name) == 0);
|
|
|
|
/* None of the core system registers use opaque; we will. */
|
|
g_assert(src_reg->opaque == NULL);
|
|
|
|
/* Create alias before redirection so we dup the right data. */
|
|
if (a->new_key) {
|
|
ARMCPRegInfo *new_reg = g_memdup(src_reg, sizeof(ARMCPRegInfo));
|
|
uint32_t *new_key = g_memdup(&a->new_key, sizeof(uint32_t));
|
|
bool ok;
|
|
|
|
new_reg->name = a->new_name;
|
|
new_reg->type |= ARM_CP_ALIAS;
|
|
/* Remove PL1/PL0 access, leaving PL2/PL3 R/W in place. */
|
|
new_reg->access &= PL2_RW | PL3_RW;
|
|
|
|
ok = g_hash_table_insert(cpu->cp_regs, new_key, new_reg);
|
|
g_assert(ok);
|
|
}
|
|
|
|
src_reg->opaque = dst_reg;
|
|
src_reg->orig_readfn = src_reg->readfn ?: raw_read;
|
|
src_reg->orig_writefn = src_reg->writefn ?: raw_write;
|
|
if (!src_reg->raw_readfn) {
|
|
src_reg->raw_readfn = raw_read;
|
|
}
|
|
if (!src_reg->raw_writefn) {
|
|
src_reg->raw_writefn = raw_write;
|
|
}
|
|
src_reg->readfn = el2_e2h_read;
|
|
src_reg->writefn = el2_e2h_write;
|
|
}
|
|
}
|
|
#endif
|
|
|
|
static CPAccessResult ctr_el0_access(CPUARMState *env, const ARMCPRegInfo *ri,
|
|
bool isread)
|
|
{
|
|
int cur_el = arm_current_el(env);
|
|
|
|
if (cur_el < 2) {
|
|
uint64_t hcr = arm_hcr_el2_eff(env);
|
|
|
|
if (cur_el == 0) {
|
|
if ((hcr & (HCR_E2H | HCR_TGE)) == (HCR_E2H | HCR_TGE)) {
|
|
if (!(env->cp15.sctlr_el[2] & SCTLR_UCT)) {
|
|
return CP_ACCESS_TRAP_EL2;
|
|
}
|
|
} else {
|
|
if (!(env->cp15.sctlr_el[1] & SCTLR_UCT)) {
|
|
return CP_ACCESS_TRAP;
|
|
}
|
|
if (hcr & HCR_TID2) {
|
|
return CP_ACCESS_TRAP_EL2;
|
|
}
|
|
}
|
|
} else if (hcr & HCR_TID2) {
|
|
return CP_ACCESS_TRAP_EL2;
|
|
}
|
|
}
|
|
|
|
if (arm_current_el(env) < 2 && arm_hcr_el2_eff(env) & HCR_TID2) {
|
|
return CP_ACCESS_TRAP_EL2;
|
|
}
|
|
|
|
return CP_ACCESS_OK;
|
|
}
|
|
|
|
static void oslar_write(CPUARMState *env, const ARMCPRegInfo *ri,
|
|
uint64_t value)
|
|
{
|
|
/* Writes to OSLAR_EL1 may update the OS lock status, which can be
|
|
* read via a bit in OSLSR_EL1.
|
|
*/
|
|
int oslock;
|
|
|
|
if (ri->state == ARM_CP_STATE_AA32) {
|
|
oslock = (value == 0xC5ACCE55);
|
|
} else {
|
|
oslock = value & 1;
|
|
}
|
|
|
|
env->cp15.oslsr_el1 = deposit32(env->cp15.oslsr_el1, 1, 1, oslock);
|
|
}
|
|
|
|
static const ARMCPRegInfo debug_cp_reginfo[] = {
|
|
/* DBGDRAR, DBGDSAR: always RAZ since we don't implement memory mapped
|
|
* debug components. The AArch64 version of DBGDRAR is named MDRAR_EL1;
|
|
* unlike DBGDRAR it is never accessible from EL0.
|
|
* DBGDSAR is deprecated and must RAZ from v8 anyway, so it has no AArch64
|
|
* accessor.
|
|
*/
|
|
{ .name = "DBGDRAR", .cp = 14, .crn = 1, .crm = 0, .opc1 = 0, .opc2 = 0,
|
|
.access = PL0_R, .accessfn = access_tdra,
|
|
.type = ARM_CP_CONST, .resetvalue = 0 },
|
|
{ .name = "MDRAR_EL1", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 2, .opc1 = 0, .crn = 1, .crm = 0, .opc2 = 0,
|
|
.access = PL1_R, .accessfn = access_tdra,
|
|
.type = ARM_CP_CONST, .resetvalue = 0 },
|
|
{ .name = "DBGDSAR", .cp = 14, .crn = 2, .crm = 0, .opc1 = 0, .opc2 = 0,
|
|
.access = PL0_R, .accessfn = access_tdra,
|
|
.type = ARM_CP_CONST, .resetvalue = 0 },
|
|
/* Monitor debug system control register; the 32-bit alias is DBGDSCRext. */
|
|
{ .name = "MDSCR_EL1", .state = ARM_CP_STATE_BOTH,
|
|
.cp = 14, .opc0 = 2, .opc1 = 0, .crn = 0, .crm = 2, .opc2 = 2,
|
|
.access = PL1_RW, .accessfn = access_tda,
|
|
.fieldoffset = offsetof(CPUARMState, cp15.mdscr_el1),
|
|
.resetvalue = 0 },
|
|
/* MDCCSR_EL0, aka DBGDSCRint. This is a read-only mirror of MDSCR_EL1.
|
|
* We don't implement the configurable EL0 access.
|
|
*/
|
|
{ .name = "MDCCSR_EL0", .state = ARM_CP_STATE_BOTH,
|
|
.cp = 14, .opc0 = 2, .opc1 = 0, .crn = 0, .crm = 1, .opc2 = 0,
|
|
.type = ARM_CP_ALIAS,
|
|
.access = PL1_R, .accessfn = access_tda,
|
|
.fieldoffset = offsetof(CPUARMState, cp15.mdscr_el1), },
|
|
{ .name = "OSLAR_EL1", .state = ARM_CP_STATE_BOTH,
|
|
.cp = 14, .opc0 = 2, .opc1 = 0, .crn = 1, .crm = 0, .opc2 = 4,
|
|
.access = PL1_W, .type = ARM_CP_NO_RAW,
|
|
.accessfn = access_tdosa,
|
|
.writefn = oslar_write },
|
|
{ .name = "OSLSR_EL1", .state = ARM_CP_STATE_BOTH,
|
|
.cp = 14, .opc0 = 2, .opc1 = 0, .crn = 1, .crm = 1, .opc2 = 4,
|
|
.access = PL1_R, .resetvalue = 10,
|
|
.accessfn = access_tdosa,
|
|
.fieldoffset = offsetof(CPUARMState, cp15.oslsr_el1) },
|
|
/* Dummy OSDLR_EL1: 32-bit Linux will read this */
|
|
{ .name = "OSDLR_EL1", .state = ARM_CP_STATE_BOTH,
|
|
.cp = 14, .opc0 = 2, .opc1 = 0, .crn = 1, .crm = 3, .opc2 = 4,
|
|
.access = PL1_RW, .accessfn = access_tdosa,
|
|
.type = ARM_CP_NOP },
|
|
/* Dummy DBGVCR: Linux wants to clear this on startup, but we don't
|
|
* implement vector catch debug events yet.
|
|
*/
|
|
{ .name = "DBGVCR",
|
|
.cp = 14, .opc1 = 0, .crn = 0, .crm = 7, .opc2 = 0,
|
|
.access = PL1_RW, .accessfn = access_tda,
|
|
.type = ARM_CP_NOP },
|
|
/* Dummy DBGVCR32_EL2 (which is only for a 64-bit hypervisor
|
|
* to save and restore a 32-bit guest's DBGVCR)
|
|
*/
|
|
{ .name = "DBGVCR32_EL2", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 2, .opc1 = 4, .crn = 0, .crm = 7, .opc2 = 0,
|
|
.access = PL2_RW, .accessfn = access_tda,
|
|
.type = ARM_CP_NOP },
|
|
/* Dummy MDCCINT_EL1, since we don't implement the Debug Communications
|
|
* Channel but Linux may try to access this register. The 32-bit
|
|
* alias is DBGDCCINT.
|
|
*/
|
|
{ .name = "MDCCINT_EL1", .state = ARM_CP_STATE_BOTH,
|
|
.cp = 14, .opc0 = 2, .opc1 = 0, .crn = 0, .crm = 2, .opc2 = 0,
|
|
.access = PL1_RW, .accessfn = access_tda,
|
|
.type = ARM_CP_NOP },
|
|
REGINFO_SENTINEL
|
|
};
|
|
|
|
static const ARMCPRegInfo debug_lpae_cp_reginfo[] = {
|
|
/* 64 bit access versions of the (dummy) debug registers */
|
|
{ .name = "DBGDRAR", .cp = 14, .crm = 1, .opc1 = 0,
|
|
.access = PL0_R, .type = ARM_CP_CONST|ARM_CP_64BIT, .resetvalue = 0 },
|
|
{ .name = "DBGDSAR", .cp = 14, .crm = 2, .opc1 = 0,
|
|
.access = PL0_R, .type = ARM_CP_CONST|ARM_CP_64BIT, .resetvalue = 0 },
|
|
REGINFO_SENTINEL
|
|
};
|
|
|
|
/* Return the exception level to which exceptions should be taken
|
|
* via SVEAccessTrap. If an exception should be routed through
|
|
* AArch64.AdvSIMDFPAccessTrap, return 0; fp_exception_el should
|
|
* take care of raising that exception.
|
|
* C.f. the ARM pseudocode function CheckSVEEnabled.
|
|
*/
|
|
int sve_exception_el(CPUARMState *env, int el)
|
|
{
|
|
#ifndef CONFIG_USER_ONLY
|
|
uint64_t hcr_el2 = arm_hcr_el2_eff(env);
|
|
|
|
if (el <= 1 && (hcr_el2 & (HCR_E2H | HCR_TGE)) != (HCR_E2H | HCR_TGE)) {
|
|
bool disabled = false;
|
|
|
|
/* The CPACR.ZEN controls traps to EL1:
|
|
* 0, 2 : trap EL0 and EL1 accesses
|
|
* 1 : trap only EL0 accesses
|
|
* 3 : trap no accesses
|
|
*/
|
|
if (!extract32(env->cp15.cpacr_el1, 16, 1)) {
|
|
disabled = true;
|
|
} else if (!extract32(env->cp15.cpacr_el1, 17, 1)) {
|
|
disabled = el == 0;
|
|
}
|
|
if (disabled) {
|
|
/* route_to_el2 */
|
|
return hcr_el2 & HCR_TGE ? 2 : 1;
|
|
}
|
|
|
|
/* Check CPACR.FPEN. */
|
|
if (!extract32(env->cp15.cpacr_el1, 20, 1)) {
|
|
disabled = true;
|
|
} else if (!extract32(env->cp15.cpacr_el1, 21, 1)) {
|
|
disabled = el == 0;
|
|
}
|
|
if (disabled) {
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
/* CPTR_EL2. Since TZ and TFP are positive,
|
|
* they will be zero when EL2 is not present.
|
|
*/
|
|
if (el <= 2 && !arm_is_secure_below_el3(env)) {
|
|
if (env->cp15.cptr_el[2] & CPTR_TZ) {
|
|
return 2;
|
|
}
|
|
if (env->cp15.cptr_el[2] & CPTR_TFP) {
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
/* CPTR_EL3. Since EZ is negative we must check for EL3. */
|
|
if (arm_feature(env, ARM_FEATURE_EL3)
|
|
&& !(env->cp15.cptr_el[3] & CPTR_EZ)) {
|
|
return 3;
|
|
}
|
|
#endif
|
|
return 0;
|
|
}
|
|
|
|
static uint32_t sve_zcr_get_valid_len(ARMCPU *cpu, uint32_t start_len)
|
|
{
|
|
uint32_t end_len;
|
|
|
|
end_len = start_len &= 0xf;
|
|
if (!test_bit(start_len, cpu->sve_vq_map)) {
|
|
end_len = find_last_bit(cpu->sve_vq_map, start_len);
|
|
assert(end_len < start_len);
|
|
}
|
|
return end_len;
|
|
}
|
|
|
|
/*
|
|
* Given that SVE is enabled, return the vector length for EL.
|
|
*/
|
|
uint32_t sve_zcr_len_for_el(CPUARMState *env, int el)
|
|
{
|
|
ARMCPU *cpu = env_archcpu(env);
|
|
uint32_t zcr_len = cpu->sve_max_vq - 1;
|
|
|
|
if (el <= 1) {
|
|
zcr_len = MIN(zcr_len, 0xf & (uint32_t)env->vfp.zcr_el[1]);
|
|
}
|
|
if (el <= 2 && arm_feature(env, ARM_FEATURE_EL2)) {
|
|
zcr_len = MIN(zcr_len, 0xf & (uint32_t)env->vfp.zcr_el[2]);
|
|
}
|
|
if (arm_feature(env, ARM_FEATURE_EL3)) {
|
|
zcr_len = MIN(zcr_len, 0xf & (uint32_t)env->vfp.zcr_el[3]);
|
|
}
|
|
|
|
return sve_zcr_get_valid_len(cpu, zcr_len);
|
|
}
|
|
|
|
static void zcr_write(CPUARMState *env, const ARMCPRegInfo *ri,
|
|
uint64_t value)
|
|
{
|
|
int cur_el = arm_current_el(env);
|
|
int old_len = sve_zcr_len_for_el(env, cur_el);
|
|
int new_len;
|
|
|
|
/* Bits other than [3:0] are RAZ/WI. */
|
|
QEMU_BUILD_BUG_ON(ARM_MAX_VQ > 16);
|
|
raw_write(env, ri, value & 0xf);
|
|
|
|
/*
|
|
* Because we arrived here, we know both FP and SVE are enabled;
|
|
* otherwise we would have trapped access to the ZCR_ELn register.
|
|
*/
|
|
new_len = sve_zcr_len_for_el(env, cur_el);
|
|
if (new_len < old_len) {
|
|
aarch64_sve_narrow_vq(env, new_len + 1);
|
|
}
|
|
}
|
|
|
|
static const ARMCPRegInfo zcr_el1_reginfo = {
|
|
.name = "ZCR_EL1", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 3, .opc1 = 0, .crn = 1, .crm = 2, .opc2 = 0,
|
|
.access = PL1_RW, .type = ARM_CP_SVE,
|
|
.fieldoffset = offsetof(CPUARMState, vfp.zcr_el[1]),
|
|
.writefn = zcr_write, .raw_writefn = raw_write
|
|
};
|
|
|
|
static const ARMCPRegInfo zcr_el2_reginfo = {
|
|
.name = "ZCR_EL2", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 3, .opc1 = 4, .crn = 1, .crm = 2, .opc2 = 0,
|
|
.access = PL2_RW, .type = ARM_CP_SVE,
|
|
.fieldoffset = offsetof(CPUARMState, vfp.zcr_el[2]),
|
|
.writefn = zcr_write, .raw_writefn = raw_write
|
|
};
|
|
|
|
static const ARMCPRegInfo zcr_no_el2_reginfo = {
|
|
.name = "ZCR_EL2", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 3, .opc1 = 4, .crn = 1, .crm = 2, .opc2 = 0,
|
|
.access = PL2_RW, .type = ARM_CP_SVE,
|
|
.readfn = arm_cp_read_zero, .writefn = arm_cp_write_ignore
|
|
};
|
|
|
|
static const ARMCPRegInfo zcr_el3_reginfo = {
|
|
.name = "ZCR_EL3", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 3, .opc1 = 6, .crn = 1, .crm = 2, .opc2 = 0,
|
|
.access = PL3_RW, .type = ARM_CP_SVE,
|
|
.fieldoffset = offsetof(CPUARMState, vfp.zcr_el[3]),
|
|
.writefn = zcr_write, .raw_writefn = raw_write
|
|
};
|
|
|
|
void hw_watchpoint_update(ARMCPU *cpu, int n)
|
|
{
|
|
CPUARMState *env = &cpu->env;
|
|
vaddr len = 0;
|
|
vaddr wvr = env->cp15.dbgwvr[n];
|
|
uint64_t wcr = env->cp15.dbgwcr[n];
|
|
int mask;
|
|
int flags = BP_CPU | BP_STOP_BEFORE_ACCESS;
|
|
|
|
if (env->cpu_watchpoint[n]) {
|
|
cpu_watchpoint_remove_by_ref(CPU(cpu), env->cpu_watchpoint[n]);
|
|
env->cpu_watchpoint[n] = NULL;
|
|
}
|
|
|
|
if (!extract64(wcr, 0, 1)) {
|
|
/* E bit clear : watchpoint disabled */
|
|
return;
|
|
}
|
|
|
|
switch (extract64(wcr, 3, 2)) {
|
|
case 0:
|
|
/* LSC 00 is reserved and must behave as if the wp is disabled */
|
|
return;
|
|
case 1:
|
|
flags |= BP_MEM_READ;
|
|
break;
|
|
case 2:
|
|
flags |= BP_MEM_WRITE;
|
|
break;
|
|
case 3:
|
|
flags |= BP_MEM_ACCESS;
|
|
break;
|
|
}
|
|
|
|
/* Attempts to use both MASK and BAS fields simultaneously are
|
|
* CONSTRAINED UNPREDICTABLE; we opt to ignore BAS in this case,
|
|
* thus generating a watchpoint for every byte in the masked region.
|
|
*/
|
|
mask = extract64(wcr, 24, 4);
|
|
if (mask == 1 || mask == 2) {
|
|
/* Reserved values of MASK; we must act as if the mask value was
|
|
* some non-reserved value, or as if the watchpoint were disabled.
|
|
* We choose the latter.
|
|
*/
|
|
return;
|
|
} else if (mask) {
|
|
/* Watchpoint covers an aligned area up to 2GB in size */
|
|
len = 1ULL << mask;
|
|
/* If masked bits in WVR are not zero it's CONSTRAINED UNPREDICTABLE
|
|
* whether the watchpoint fires when the unmasked bits match; we opt
|
|
* to generate the exceptions.
|
|
*/
|
|
wvr &= ~(len - 1);
|
|
} else {
|
|
/* Watchpoint covers bytes defined by the byte address select bits */
|
|
int bas = extract64(wcr, 5, 8);
|
|
int basstart;
|
|
|
|
if (bas == 0) {
|
|
/* This must act as if the watchpoint is disabled */
|
|
return;
|
|
}
|
|
|
|
if (extract64(wvr, 2, 1)) {
|
|
/* Deprecated case of an only 4-aligned address. BAS[7:4] are
|
|
* ignored, and BAS[3:0] define which bytes to watch.
|
|
*/
|
|
bas &= 0xf;
|
|
}
|
|
/* The BAS bits are supposed to be programmed to indicate a contiguous
|
|
* range of bytes. Otherwise it is CONSTRAINED UNPREDICTABLE whether
|
|
* we fire for each byte in the word/doubleword addressed by the WVR.
|
|
* We choose to ignore any non-zero bits after the first range of 1s.
|
|
*/
|
|
basstart = ctz32(bas);
|
|
len = cto32(bas >> basstart);
|
|
wvr += basstart;
|
|
}
|
|
|
|
cpu_watchpoint_insert(CPU(cpu), wvr, len, flags,
|
|
&env->cpu_watchpoint[n]);
|
|
}
|
|
|
|
void hw_watchpoint_update_all(ARMCPU *cpu)
|
|
{
|
|
int i;
|
|
CPUARMState *env = &cpu->env;
|
|
|
|
/* Completely clear out existing QEMU watchpoints and our array, to
|
|
* avoid possible stale entries following migration load.
|
|
*/
|
|
cpu_watchpoint_remove_all(CPU(cpu), BP_CPU);
|
|
memset(env->cpu_watchpoint, 0, sizeof(env->cpu_watchpoint));
|
|
|
|
for (i = 0; i < ARRAY_SIZE(cpu->env.cpu_watchpoint); i++) {
|
|
hw_watchpoint_update(cpu, i);
|
|
}
|
|
}
|
|
|
|
static void dbgwvr_write(CPUARMState *env, const ARMCPRegInfo *ri,
|
|
uint64_t value)
|
|
{
|
|
ARMCPU *cpu = env_archcpu(env);
|
|
int i = ri->crm;
|
|
|
|
/* Bits [63:49] are hardwired to the value of bit [48]; that is, the
|
|
* register reads and behaves as if values written are sign extended.
|
|
* Bits [1:0] are RES0.
|
|
*/
|
|
value = sextract64(value, 0, 49) & ~3ULL;
|
|
|
|
raw_write(env, ri, value);
|
|
hw_watchpoint_update(cpu, i);
|
|
}
|
|
|
|
static void dbgwcr_write(CPUARMState *env, const ARMCPRegInfo *ri,
|
|
uint64_t value)
|
|
{
|
|
ARMCPU *cpu = env_archcpu(env);
|
|
int i = ri->crm;
|
|
|
|
raw_write(env, ri, value);
|
|
hw_watchpoint_update(cpu, i);
|
|
}
|
|
|
|
void hw_breakpoint_update(ARMCPU *cpu, int n)
|
|
{
|
|
CPUARMState *env = &cpu->env;
|
|
uint64_t bvr = env->cp15.dbgbvr[n];
|
|
uint64_t bcr = env->cp15.dbgbcr[n];
|
|
vaddr addr;
|
|
int bt;
|
|
int flags = BP_CPU;
|
|
|
|
if (env->cpu_breakpoint[n]) {
|
|
cpu_breakpoint_remove_by_ref(CPU(cpu), env->cpu_breakpoint[n]);
|
|
env->cpu_breakpoint[n] = NULL;
|
|
}
|
|
|
|
if (!extract64(bcr, 0, 1)) {
|
|
/* E bit clear : watchpoint disabled */
|
|
return;
|
|
}
|
|
|
|
bt = extract64(bcr, 20, 4);
|
|
|
|
switch (bt) {
|
|
case 4: /* unlinked address mismatch (reserved if AArch64) */
|
|
case 5: /* linked address mismatch (reserved if AArch64) */
|
|
qemu_log_mask(LOG_UNIMP,
|
|
"arm: address mismatch breakpoint types not implemented\n");
|
|
return;
|
|
case 0: /* unlinked address match */
|
|
case 1: /* linked address match */
|
|
{
|
|
/* Bits [63:49] are hardwired to the value of bit [48]; that is,
|
|
* we behave as if the register was sign extended. Bits [1:0] are
|
|
* RES0. The BAS field is used to allow setting breakpoints on 16
|
|
* bit wide instructions; it is CONSTRAINED UNPREDICTABLE whether
|
|
* a bp will fire if the addresses covered by the bp and the addresses
|
|
* covered by the insn overlap but the insn doesn't start at the
|
|
* start of the bp address range. We choose to require the insn and
|
|
* the bp to have the same address. The constraints on writing to
|
|
* BAS enforced in dbgbcr_write mean we have only four cases:
|
|
* 0b0000 => no breakpoint
|
|
* 0b0011 => breakpoint on addr
|
|
* 0b1100 => breakpoint on addr + 2
|
|
* 0b1111 => breakpoint on addr
|
|
* See also figure D2-3 in the v8 ARM ARM (DDI0487A.c).
|
|
*/
|
|
int bas = extract64(bcr, 5, 4);
|
|
addr = sextract64(bvr, 0, 49) & ~3ULL;
|
|
if (bas == 0) {
|
|
return;
|
|
}
|
|
if (bas == 0xc) {
|
|
addr += 2;
|
|
}
|
|
break;
|
|
}
|
|
case 2: /* unlinked context ID match */
|
|
case 8: /* unlinked VMID match (reserved if no EL2) */
|
|
case 10: /* unlinked context ID and VMID match (reserved if no EL2) */
|
|
qemu_log_mask(LOG_UNIMP,
|
|
"arm: unlinked context breakpoint types not implemented\n");
|
|
return;
|
|
case 9: /* linked VMID match (reserved if no EL2) */
|
|
case 11: /* linked context ID and VMID match (reserved if no EL2) */
|
|
case 3: /* linked context ID match */
|
|
default:
|
|
/* We must generate no events for Linked context matches (unless
|
|
* they are linked to by some other bp/wp, which is handled in
|
|
* updates for the linking bp/wp). We choose to also generate no events
|
|
* for reserved values.
|
|
*/
|
|
return;
|
|
}
|
|
|
|
cpu_breakpoint_insert(CPU(cpu), addr, flags, &env->cpu_breakpoint[n]);
|
|
}
|
|
|
|
void hw_breakpoint_update_all(ARMCPU *cpu)
|
|
{
|
|
int i;
|
|
CPUARMState *env = &cpu->env;
|
|
|
|
/* Completely clear out existing QEMU breakpoints and our array, to
|
|
* avoid possible stale entries following migration load.
|
|
*/
|
|
cpu_breakpoint_remove_all(CPU(cpu), BP_CPU);
|
|
memset(env->cpu_breakpoint, 0, sizeof(env->cpu_breakpoint));
|
|
|
|
for (i = 0; i < ARRAY_SIZE(cpu->env.cpu_breakpoint); i++) {
|
|
hw_breakpoint_update(cpu, i);
|
|
}
|
|
}
|
|
|
|
static void dbgbvr_write(CPUARMState *env, const ARMCPRegInfo *ri,
|
|
uint64_t value)
|
|
{
|
|
ARMCPU *cpu = env_archcpu(env);
|
|
int i = ri->crm;
|
|
|
|
raw_write(env, ri, value);
|
|
hw_breakpoint_update(cpu, i);
|
|
}
|
|
|
|
static void dbgbcr_write(CPUARMState *env, const ARMCPRegInfo *ri,
|
|
uint64_t value)
|
|
{
|
|
ARMCPU *cpu = env_archcpu(env);
|
|
int i = ri->crm;
|
|
|
|
/* BAS[3] is a read-only copy of BAS[2], and BAS[1] a read-only
|
|
* copy of BAS[0].
|
|
*/
|
|
value = deposit64(value, 6, 1, extract64(value, 5, 1));
|
|
value = deposit64(value, 8, 1, extract64(value, 7, 1));
|
|
|
|
raw_write(env, ri, value);
|
|
hw_breakpoint_update(cpu, i);
|
|
}
|
|
|
|
static void define_debug_regs(ARMCPU *cpu)
|
|
{
|
|
/* Define v7 and v8 architectural debug registers.
|
|
* These are just dummy implementations for now.
|
|
*/
|
|
int i;
|
|
int wrps, brps, ctx_cmps;
|
|
ARMCPRegInfo dbgdidr = {
|
|
.name = "DBGDIDR", .cp = 14, .crn = 0, .crm = 0, .opc1 = 0, .opc2 = 0,
|
|
.access = PL0_R, .accessfn = access_tda,
|
|
.type = ARM_CP_CONST, .resetvalue = cpu->isar.dbgdidr,
|
|
};
|
|
|
|
/* Note that all these register fields hold "number of Xs minus 1". */
|
|
brps = arm_num_brps(cpu);
|
|
wrps = arm_num_wrps(cpu);
|
|
ctx_cmps = arm_num_ctx_cmps(cpu);
|
|
|
|
assert(ctx_cmps <= brps);
|
|
|
|
define_one_arm_cp_reg(cpu, &dbgdidr);
|
|
define_arm_cp_regs(cpu, debug_cp_reginfo);
|
|
|
|
if (arm_feature(&cpu->env, ARM_FEATURE_LPAE)) {
|
|
define_arm_cp_regs(cpu, debug_lpae_cp_reginfo);
|
|
}
|
|
|
|
for (i = 0; i < brps; i++) {
|
|
ARMCPRegInfo dbgregs[] = {
|
|
{ .name = "DBGBVR", .state = ARM_CP_STATE_BOTH,
|
|
.cp = 14, .opc0 = 2, .opc1 = 0, .crn = 0, .crm = i, .opc2 = 4,
|
|
.access = PL1_RW, .accessfn = access_tda,
|
|
.fieldoffset = offsetof(CPUARMState, cp15.dbgbvr[i]),
|
|
.writefn = dbgbvr_write, .raw_writefn = raw_write
|
|
},
|
|
{ .name = "DBGBCR", .state = ARM_CP_STATE_BOTH,
|
|
.cp = 14, .opc0 = 2, .opc1 = 0, .crn = 0, .crm = i, .opc2 = 5,
|
|
.access = PL1_RW, .accessfn = access_tda,
|
|
.fieldoffset = offsetof(CPUARMState, cp15.dbgbcr[i]),
|
|
.writefn = dbgbcr_write, .raw_writefn = raw_write
|
|
},
|
|
REGINFO_SENTINEL
|
|
};
|
|
define_arm_cp_regs(cpu, dbgregs);
|
|
}
|
|
|
|
for (i = 0; i < wrps; i++) {
|
|
ARMCPRegInfo dbgregs[] = {
|
|
{ .name = "DBGWVR", .state = ARM_CP_STATE_BOTH,
|
|
.cp = 14, .opc0 = 2, .opc1 = 0, .crn = 0, .crm = i, .opc2 = 6,
|
|
.access = PL1_RW, .accessfn = access_tda,
|
|
.fieldoffset = offsetof(CPUARMState, cp15.dbgwvr[i]),
|
|
.writefn = dbgwvr_write, .raw_writefn = raw_write
|
|
},
|
|
{ .name = "DBGWCR", .state = ARM_CP_STATE_BOTH,
|
|
.cp = 14, .opc0 = 2, .opc1 = 0, .crn = 0, .crm = i, .opc2 = 7,
|
|
.access = PL1_RW, .accessfn = access_tda,
|
|
.fieldoffset = offsetof(CPUARMState, cp15.dbgwcr[i]),
|
|
.writefn = dbgwcr_write, .raw_writefn = raw_write
|
|
},
|
|
REGINFO_SENTINEL
|
|
};
|
|
define_arm_cp_regs(cpu, dbgregs);
|
|
}
|
|
}
|
|
|
|
static void define_pmu_regs(ARMCPU *cpu)
|
|
{
|
|
/*
|
|
* v7 performance monitor control register: same implementor
|
|
* field as main ID register, and we implement four counters in
|
|
* addition to the cycle count register.
|
|
*/
|
|
unsigned int i, pmcrn = 4;
|
|
ARMCPRegInfo pmcr = {
|
|
.name = "PMCR", .cp = 15, .crn = 9, .crm = 12, .opc1 = 0, .opc2 = 0,
|
|
.access = PL0_RW,
|
|
.type = ARM_CP_IO | ARM_CP_ALIAS,
|
|
.fieldoffset = offsetoflow32(CPUARMState, cp15.c9_pmcr),
|
|
.accessfn = pmreg_access, .writefn = pmcr_write,
|
|
.raw_writefn = raw_write,
|
|
};
|
|
ARMCPRegInfo pmcr64 = {
|
|
.name = "PMCR_EL0", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 3, .opc1 = 3, .crn = 9, .crm = 12, .opc2 = 0,
|
|
.access = PL0_RW, .accessfn = pmreg_access,
|
|
.type = ARM_CP_IO,
|
|
.fieldoffset = offsetof(CPUARMState, cp15.c9_pmcr),
|
|
.resetvalue = (cpu->midr & 0xff000000) | (pmcrn << PMCRN_SHIFT),
|
|
.writefn = pmcr_write, .raw_writefn = raw_write,
|
|
};
|
|
define_one_arm_cp_reg(cpu, &pmcr);
|
|
define_one_arm_cp_reg(cpu, &pmcr64);
|
|
for (i = 0; i < pmcrn; i++) {
|
|
char *pmevcntr_name = g_strdup_printf("PMEVCNTR%d", i);
|
|
char *pmevcntr_el0_name = g_strdup_printf("PMEVCNTR%d_EL0", i);
|
|
char *pmevtyper_name = g_strdup_printf("PMEVTYPER%d", i);
|
|
char *pmevtyper_el0_name = g_strdup_printf("PMEVTYPER%d_EL0", i);
|
|
ARMCPRegInfo pmev_regs[] = {
|
|
{ .name = pmevcntr_name, .cp = 15, .crn = 14,
|
|
.crm = 8 | (3 & (i >> 3)), .opc1 = 0, .opc2 = i & 7,
|
|
.access = PL0_RW, .type = ARM_CP_IO | ARM_CP_ALIAS,
|
|
.readfn = pmevcntr_readfn, .writefn = pmevcntr_writefn,
|
|
.accessfn = pmreg_access },
|
|
{ .name = pmevcntr_el0_name, .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 3, .opc1 = 3, .crn = 14, .crm = 8 | (3 & (i >> 3)),
|
|
.opc2 = i & 7, .access = PL0_RW, .accessfn = pmreg_access,
|
|
.type = ARM_CP_IO,
|
|
.readfn = pmevcntr_readfn, .writefn = pmevcntr_writefn,
|
|
.raw_readfn = pmevcntr_rawread,
|
|
.raw_writefn = pmevcntr_rawwrite },
|
|
{ .name = pmevtyper_name, .cp = 15, .crn = 14,
|
|
.crm = 12 | (3 & (i >> 3)), .opc1 = 0, .opc2 = i & 7,
|
|
.access = PL0_RW, .type = ARM_CP_IO | ARM_CP_ALIAS,
|
|
.readfn = pmevtyper_readfn, .writefn = pmevtyper_writefn,
|
|
.accessfn = pmreg_access },
|
|
{ .name = pmevtyper_el0_name, .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 3, .opc1 = 3, .crn = 14, .crm = 12 | (3 & (i >> 3)),
|
|
.opc2 = i & 7, .access = PL0_RW, .accessfn = pmreg_access,
|
|
.type = ARM_CP_IO,
|
|
.readfn = pmevtyper_readfn, .writefn = pmevtyper_writefn,
|
|
.raw_writefn = pmevtyper_rawwrite },
|
|
REGINFO_SENTINEL
|
|
};
|
|
define_arm_cp_regs(cpu, pmev_regs);
|
|
g_free(pmevcntr_name);
|
|
g_free(pmevcntr_el0_name);
|
|
g_free(pmevtyper_name);
|
|
g_free(pmevtyper_el0_name);
|
|
}
|
|
if (cpu_isar_feature(aa32_pmu_8_1, cpu)) {
|
|
ARMCPRegInfo v81_pmu_regs[] = {
|
|
{ .name = "PMCEID2", .state = ARM_CP_STATE_AA32,
|
|
.cp = 15, .opc1 = 0, .crn = 9, .crm = 14, .opc2 = 4,
|
|
.access = PL0_R, .accessfn = pmreg_access, .type = ARM_CP_CONST,
|
|
.resetvalue = extract64(cpu->pmceid0, 32, 32) },
|
|
{ .name = "PMCEID3", .state = ARM_CP_STATE_AA32,
|
|
.cp = 15, .opc1 = 0, .crn = 9, .crm = 14, .opc2 = 5,
|
|
.access = PL0_R, .accessfn = pmreg_access, .type = ARM_CP_CONST,
|
|
.resetvalue = extract64(cpu->pmceid1, 32, 32) },
|
|
REGINFO_SENTINEL
|
|
};
|
|
define_arm_cp_regs(cpu, v81_pmu_regs);
|
|
}
|
|
if (cpu_isar_feature(any_pmu_8_4, cpu)) {
|
|
static const ARMCPRegInfo v84_pmmir = {
|
|
.name = "PMMIR_EL1", .state = ARM_CP_STATE_BOTH,
|
|
.opc0 = 3, .opc1 = 0, .crn = 9, .crm = 14, .opc2 = 6,
|
|
.access = PL1_R, .accessfn = pmreg_access, .type = ARM_CP_CONST,
|
|
.resetvalue = 0
|
|
};
|
|
define_one_arm_cp_reg(cpu, &v84_pmmir);
|
|
}
|
|
}
|
|
|
|
/* We don't know until after realize whether there's a GICv3
|
|
* attached, and that is what registers the gicv3 sysregs.
|
|
* So we have to fill in the GIC fields in ID_PFR/ID_PFR1_EL1/ID_AA64PFR0_EL1
|
|
* at runtime.
|
|
*/
|
|
static uint64_t id_pfr1_read(CPUARMState *env, const ARMCPRegInfo *ri)
|
|
{
|
|
ARMCPU *cpu = env_archcpu(env);
|
|
uint64_t pfr1 = cpu->id_pfr1;
|
|
|
|
if (env->gicv3state) {
|
|
pfr1 |= 1 << 28;
|
|
}
|
|
return pfr1;
|
|
}
|
|
|
|
static uint64_t id_aa64pfr0_read(CPUARMState *env, const ARMCPRegInfo *ri)
|
|
{
|
|
ARMCPU *cpu = env_archcpu(env);
|
|
uint64_t pfr0 = cpu->isar.id_aa64pfr0;
|
|
|
|
if (env->gicv3state) {
|
|
pfr0 |= 1 << 24;
|
|
}
|
|
return pfr0;
|
|
}
|
|
|
|
/* Shared logic between LORID and the rest of the LOR* registers.
|
|
* Secure state has already been delt with.
|
|
*/
|
|
static CPAccessResult access_lor_ns(CPUARMState *env)
|
|
{
|
|
int el = arm_current_el(env);
|
|
|
|
if (el < 2 && (arm_hcr_el2_eff(env) & HCR_TLOR)) {
|
|
return CP_ACCESS_TRAP_EL2;
|
|
}
|
|
if (el < 3 && (env->cp15.scr_el3 & SCR_TLOR)) {
|
|
return CP_ACCESS_TRAP_EL3;
|
|
}
|
|
return CP_ACCESS_OK;
|
|
}
|
|
|
|
static CPAccessResult access_lorid(CPUARMState *env, const ARMCPRegInfo *ri,
|
|
bool isread)
|
|
{
|
|
if (arm_is_secure_below_el3(env)) {
|
|
/* Access ok in secure mode. */
|
|
return CP_ACCESS_OK;
|
|
}
|
|
return access_lor_ns(env);
|
|
}
|
|
|
|
static CPAccessResult access_lor_other(CPUARMState *env,
|
|
const ARMCPRegInfo *ri, bool isread)
|
|
{
|
|
if (arm_is_secure_below_el3(env)) {
|
|
/* Access denied in secure mode. */
|
|
return CP_ACCESS_TRAP;
|
|
}
|
|
return access_lor_ns(env);
|
|
}
|
|
|
|
/*
|
|
* A trivial implementation of ARMv8.1-LOR leaves all of these
|
|
* registers fixed at 0, which indicates that there are zero
|
|
* supported Limited Ordering regions.
|
|
*/
|
|
static const ARMCPRegInfo lor_reginfo[] = {
|
|
{ .name = "LORSA_EL1", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 3, .opc1 = 0, .crn = 10, .crm = 4, .opc2 = 0,
|
|
.access = PL1_RW, .accessfn = access_lor_other,
|
|
.type = ARM_CP_CONST, .resetvalue = 0 },
|
|
{ .name = "LOREA_EL1", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 3, .opc1 = 0, .crn = 10, .crm = 4, .opc2 = 1,
|
|
.access = PL1_RW, .accessfn = access_lor_other,
|
|
.type = ARM_CP_CONST, .resetvalue = 0 },
|
|
{ .name = "LORN_EL1", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 3, .opc1 = 0, .crn = 10, .crm = 4, .opc2 = 2,
|
|
.access = PL1_RW, .accessfn = access_lor_other,
|
|
.type = ARM_CP_CONST, .resetvalue = 0 },
|
|
{ .name = "LORC_EL1", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 3, .opc1 = 0, .crn = 10, .crm = 4, .opc2 = 3,
|
|
.access = PL1_RW, .accessfn = access_lor_other,
|
|
.type = ARM_CP_CONST, .resetvalue = 0 },
|
|
{ .name = "LORID_EL1", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 3, .opc1 = 0, .crn = 10, .crm = 4, .opc2 = 7,
|
|
.access = PL1_R, .accessfn = access_lorid,
|
|
.type = ARM_CP_CONST, .resetvalue = 0 },
|
|
REGINFO_SENTINEL
|
|
};
|
|
|
|
#ifdef TARGET_AARCH64
|
|
static CPAccessResult access_pauth(CPUARMState *env, const ARMCPRegInfo *ri,
|
|
bool isread)
|
|
{
|
|
int el = arm_current_el(env);
|
|
|
|
if (el < 2 &&
|
|
arm_feature(env, ARM_FEATURE_EL2) &&
|
|
!(arm_hcr_el2_eff(env) & HCR_APK)) {
|
|
return CP_ACCESS_TRAP_EL2;
|
|
}
|
|
if (el < 3 &&
|
|
arm_feature(env, ARM_FEATURE_EL3) &&
|
|
!(env->cp15.scr_el3 & SCR_APK)) {
|
|
return CP_ACCESS_TRAP_EL3;
|
|
}
|
|
return CP_ACCESS_OK;
|
|
}
|
|
|
|
static const ARMCPRegInfo pauth_reginfo[] = {
|
|
{ .name = "APDAKEYLO_EL1", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 3, .opc1 = 0, .crn = 2, .crm = 2, .opc2 = 0,
|
|
.access = PL1_RW, .accessfn = access_pauth,
|
|
.fieldoffset = offsetof(CPUARMState, keys.apda.lo) },
|
|
{ .name = "APDAKEYHI_EL1", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 3, .opc1 = 0, .crn = 2, .crm = 2, .opc2 = 1,
|
|
.access = PL1_RW, .accessfn = access_pauth,
|
|
.fieldoffset = offsetof(CPUARMState, keys.apda.hi) },
|
|
{ .name = "APDBKEYLO_EL1", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 3, .opc1 = 0, .crn = 2, .crm = 2, .opc2 = 2,
|
|
.access = PL1_RW, .accessfn = access_pauth,
|
|
.fieldoffset = offsetof(CPUARMState, keys.apdb.lo) },
|
|
{ .name = "APDBKEYHI_EL1", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 3, .opc1 = 0, .crn = 2, .crm = 2, .opc2 = 3,
|
|
.access = PL1_RW, .accessfn = access_pauth,
|
|
.fieldoffset = offsetof(CPUARMState, keys.apdb.hi) },
|
|
{ .name = "APGAKEYLO_EL1", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 3, .opc1 = 0, .crn = 2, .crm = 3, .opc2 = 0,
|
|
.access = PL1_RW, .accessfn = access_pauth,
|
|
.fieldoffset = offsetof(CPUARMState, keys.apga.lo) },
|
|
{ .name = "APGAKEYHI_EL1", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 3, .opc1 = 0, .crn = 2, .crm = 3, .opc2 = 1,
|
|
.access = PL1_RW, .accessfn = access_pauth,
|
|
.fieldoffset = offsetof(CPUARMState, keys.apga.hi) },
|
|
{ .name = "APIAKEYLO_EL1", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 3, .opc1 = 0, .crn = 2, .crm = 1, .opc2 = 0,
|
|
.access = PL1_RW, .accessfn = access_pauth,
|
|
.fieldoffset = offsetof(CPUARMState, keys.apia.lo) },
|
|
{ .name = "APIAKEYHI_EL1", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 3, .opc1 = 0, .crn = 2, .crm = 1, .opc2 = 1,
|
|
.access = PL1_RW, .accessfn = access_pauth,
|
|
.fieldoffset = offsetof(CPUARMState, keys.apia.hi) },
|
|
{ .name = "APIBKEYLO_EL1", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 3, .opc1 = 0, .crn = 2, .crm = 1, .opc2 = 2,
|
|
.access = PL1_RW, .accessfn = access_pauth,
|
|
.fieldoffset = offsetof(CPUARMState, keys.apib.lo) },
|
|
{ .name = "APIBKEYHI_EL1", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 3, .opc1 = 0, .crn = 2, .crm = 1, .opc2 = 3,
|
|
.access = PL1_RW, .accessfn = access_pauth,
|
|
.fieldoffset = offsetof(CPUARMState, keys.apib.hi) },
|
|
REGINFO_SENTINEL
|
|
};
|
|
|
|
static uint64_t rndr_readfn(CPUARMState *env, const ARMCPRegInfo *ri)
|
|
{
|
|
Error *err = NULL;
|
|
uint64_t ret;
|
|
|
|
/* Success sets NZCV = 0000. */
|
|
env->NF = env->CF = env->VF = 0, env->ZF = 1;
|
|
|
|
if (qemu_guest_getrandom(&ret, sizeof(ret), &err) < 0) {
|
|
/*
|
|
* ??? Failed, for unknown reasons in the crypto subsystem.
|
|
* The best we can do is log the reason and return the
|
|
* timed-out indication to the guest. There is no reason
|
|
* we know to expect this failure to be transitory, so the
|
|
* guest may well hang retrying the operation.
|
|
*/
|
|
qemu_log_mask(LOG_UNIMP, "%s: Crypto failure: %s",
|
|
ri->name, error_get_pretty(err));
|
|
error_free(err);
|
|
|
|
env->ZF = 0; /* NZCF = 0100 */
|
|
return 0;
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
/* We do not support re-seeding, so the two registers operate the same. */
|
|
static const ARMCPRegInfo rndr_reginfo[] = {
|
|
{ .name = "RNDR", .state = ARM_CP_STATE_AA64,
|
|
.type = ARM_CP_NO_RAW | ARM_CP_SUPPRESS_TB_END | ARM_CP_IO,
|
|
.opc0 = 3, .opc1 = 3, .crn = 2, .crm = 4, .opc2 = 0,
|
|
.access = PL0_R, .readfn = rndr_readfn },
|
|
{ .name = "RNDRRS", .state = ARM_CP_STATE_AA64,
|
|
.type = ARM_CP_NO_RAW | ARM_CP_SUPPRESS_TB_END | ARM_CP_IO,
|
|
.opc0 = 3, .opc1 = 3, .crn = 2, .crm = 4, .opc2 = 1,
|
|
.access = PL0_R, .readfn = rndr_readfn },
|
|
REGINFO_SENTINEL
|
|
};
|
|
|
|
#ifndef CONFIG_USER_ONLY
|
|
static void dccvap_writefn(CPUARMState *env, const ARMCPRegInfo *opaque,
|
|
uint64_t value)
|
|
{
|
|
ARMCPU *cpu = env_archcpu(env);
|
|
/* CTR_EL0 System register -> DminLine, bits [19:16] */
|
|
uint64_t dline_size = 4 << ((cpu->ctr >> 16) & 0xF);
|
|
uint64_t vaddr_in = (uint64_t) value;
|
|
uint64_t vaddr = vaddr_in & ~(dline_size - 1);
|
|
void *haddr;
|
|
int mem_idx = cpu_mmu_index(env, false);
|
|
|
|
/* This won't be crossing page boundaries */
|
|
haddr = probe_read(env, vaddr, dline_size, mem_idx, GETPC());
|
|
if (haddr) {
|
|
|
|
ram_addr_t offset;
|
|
MemoryRegion *mr;
|
|
|
|
/* RCU lock is already being held */
|
|
mr = memory_region_from_host(haddr, &offset);
|
|
|
|
if (mr) {
|
|
memory_region_do_writeback(mr, offset, dline_size);
|
|
}
|
|
}
|
|
}
|
|
|
|
static const ARMCPRegInfo dcpop_reg[] = {
|
|
{ .name = "DC_CVAP", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 1, .opc1 = 3, .crn = 7, .crm = 12, .opc2 = 1,
|
|
.access = PL0_W, .type = ARM_CP_NO_RAW | ARM_CP_SUPPRESS_TB_END,
|
|
.accessfn = aa64_cacheop_access, .writefn = dccvap_writefn },
|
|
REGINFO_SENTINEL
|
|
};
|
|
|
|
static const ARMCPRegInfo dcpodp_reg[] = {
|
|
{ .name = "DC_CVADP", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 1, .opc1 = 3, .crn = 7, .crm = 13, .opc2 = 1,
|
|
.access = PL0_W, .type = ARM_CP_NO_RAW | ARM_CP_SUPPRESS_TB_END,
|
|
.accessfn = aa64_cacheop_access, .writefn = dccvap_writefn },
|
|
REGINFO_SENTINEL
|
|
};
|
|
#endif /*CONFIG_USER_ONLY*/
|
|
|
|
#endif
|
|
|
|
static CPAccessResult access_predinv(CPUARMState *env, const ARMCPRegInfo *ri,
|
|
bool isread)
|
|
{
|
|
int el = arm_current_el(env);
|
|
|
|
if (el == 0) {
|
|
uint64_t sctlr = arm_sctlr(env, el);
|
|
if (!(sctlr & SCTLR_EnRCTX)) {
|
|
return CP_ACCESS_TRAP;
|
|
}
|
|
} else if (el == 1) {
|
|
uint64_t hcr = arm_hcr_el2_eff(env);
|
|
if (hcr & HCR_NV) {
|
|
return CP_ACCESS_TRAP_EL2;
|
|
}
|
|
}
|
|
return CP_ACCESS_OK;
|
|
}
|
|
|
|
static const ARMCPRegInfo predinv_reginfo[] = {
|
|
{ .name = "CFP_RCTX", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 1, .opc1 = 3, .crn = 7, .crm = 3, .opc2 = 4,
|
|
.type = ARM_CP_NOP, .access = PL0_W, .accessfn = access_predinv },
|
|
{ .name = "DVP_RCTX", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 1, .opc1 = 3, .crn = 7, .crm = 3, .opc2 = 5,
|
|
.type = ARM_CP_NOP, .access = PL0_W, .accessfn = access_predinv },
|
|
{ .name = "CPP_RCTX", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 1, .opc1 = 3, .crn = 7, .crm = 3, .opc2 = 7,
|
|
.type = ARM_CP_NOP, .access = PL0_W, .accessfn = access_predinv },
|
|
/*
|
|
* Note the AArch32 opcodes have a different OPC1.
|
|
*/
|
|
{ .name = "CFPRCTX", .state = ARM_CP_STATE_AA32,
|
|
.cp = 15, .opc1 = 0, .crn = 7, .crm = 3, .opc2 = 4,
|
|
.type = ARM_CP_NOP, .access = PL0_W, .accessfn = access_predinv },
|
|
{ .name = "DVPRCTX", .state = ARM_CP_STATE_AA32,
|
|
.cp = 15, .opc1 = 0, .crn = 7, .crm = 3, .opc2 = 5,
|
|
.type = ARM_CP_NOP, .access = PL0_W, .accessfn = access_predinv },
|
|
{ .name = "CPPRCTX", .state = ARM_CP_STATE_AA32,
|
|
.cp = 15, .opc1 = 0, .crn = 7, .crm = 3, .opc2 = 7,
|
|
.type = ARM_CP_NOP, .access = PL0_W, .accessfn = access_predinv },
|
|
REGINFO_SENTINEL
|
|
};
|
|
|
|
static CPAccessResult access_aa64_tid3(CPUARMState *env, const ARMCPRegInfo *ri,
|
|
bool isread)
|
|
{
|
|
if ((arm_current_el(env) < 2) && (arm_hcr_el2_eff(env) & HCR_TID3)) {
|
|
return CP_ACCESS_TRAP_EL2;
|
|
}
|
|
|
|
return CP_ACCESS_OK;
|
|
}
|
|
|
|
static CPAccessResult access_aa32_tid3(CPUARMState *env, const ARMCPRegInfo *ri,
|
|
bool isread)
|
|
{
|
|
if (arm_feature(env, ARM_FEATURE_V8)) {
|
|
return access_aa64_tid3(env, ri, isread);
|
|
}
|
|
|
|
return CP_ACCESS_OK;
|
|
}
|
|
|
|
static CPAccessResult access_jazelle(CPUARMState *env, const ARMCPRegInfo *ri,
|
|
bool isread)
|
|
{
|
|
if (arm_current_el(env) == 1 && (arm_hcr_el2_eff(env) & HCR_TID0)) {
|
|
return CP_ACCESS_TRAP_EL2;
|
|
}
|
|
|
|
return CP_ACCESS_OK;
|
|
}
|
|
|
|
static const ARMCPRegInfo jazelle_regs[] = {
|
|
{ .name = "JIDR",
|
|
.cp = 14, .crn = 0, .crm = 0, .opc1 = 7, .opc2 = 0,
|
|
.access = PL1_R, .accessfn = access_jazelle,
|
|
.type = ARM_CP_CONST, .resetvalue = 0 },
|
|
{ .name = "JOSCR",
|
|
.cp = 14, .crn = 1, .crm = 0, .opc1 = 7, .opc2 = 0,
|
|
.access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 },
|
|
{ .name = "JMCR",
|
|
.cp = 14, .crn = 2, .crm = 0, .opc1 = 7, .opc2 = 0,
|
|
.access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 },
|
|
REGINFO_SENTINEL
|
|
};
|
|
|
|
static const ARMCPRegInfo vhe_reginfo[] = {
|
|
{ .name = "CONTEXTIDR_EL2", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 3, .opc1 = 4, .crn = 13, .crm = 0, .opc2 = 1,
|
|
.access = PL2_RW,
|
|
.fieldoffset = offsetof(CPUARMState, cp15.contextidr_el[2]) },
|
|
{ .name = "TTBR1_EL2", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 3, .opc1 = 4, .crn = 2, .crm = 0, .opc2 = 1,
|
|
.access = PL2_RW, .writefn = vmsa_tcr_ttbr_el2_write,
|
|
.fieldoffset = offsetof(CPUARMState, cp15.ttbr1_el[2]) },
|
|
#ifndef CONFIG_USER_ONLY
|
|
{ .name = "CNTHV_CVAL_EL2", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 3, .opc1 = 4, .crn = 14, .crm = 3, .opc2 = 2,
|
|
.fieldoffset =
|
|
offsetof(CPUARMState, cp15.c14_timer[GTIMER_HYPVIRT].cval),
|
|
.type = ARM_CP_IO, .access = PL2_RW,
|
|
.writefn = gt_hv_cval_write, .raw_writefn = raw_write },
|
|
{ .name = "CNTHV_TVAL_EL2", .state = ARM_CP_STATE_BOTH,
|
|
.opc0 = 3, .opc1 = 4, .crn = 14, .crm = 3, .opc2 = 0,
|
|
.type = ARM_CP_NO_RAW | ARM_CP_IO, .access = PL2_RW,
|
|
.resetfn = gt_hv_timer_reset,
|
|
.readfn = gt_hv_tval_read, .writefn = gt_hv_tval_write },
|
|
{ .name = "CNTHV_CTL_EL2", .state = ARM_CP_STATE_BOTH,
|
|
.type = ARM_CP_IO,
|
|
.opc0 = 3, .opc1 = 4, .crn = 14, .crm = 3, .opc2 = 1,
|
|
.access = PL2_RW,
|
|
.fieldoffset = offsetof(CPUARMState, cp15.c14_timer[GTIMER_HYPVIRT].ctl),
|
|
.writefn = gt_hv_ctl_write, .raw_writefn = raw_write },
|
|
{ .name = "CNTP_CTL_EL02", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 3, .opc1 = 5, .crn = 14, .crm = 2, .opc2 = 1,
|
|
.type = ARM_CP_IO | ARM_CP_ALIAS,
|
|
.access = PL2_RW, .accessfn = e2h_access,
|
|
.fieldoffset = offsetof(CPUARMState, cp15.c14_timer[GTIMER_PHYS].ctl),
|
|
.writefn = gt_phys_ctl_write, .raw_writefn = raw_write },
|
|
{ .name = "CNTV_CTL_EL02", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 3, .opc1 = 5, .crn = 14, .crm = 3, .opc2 = 1,
|
|
.type = ARM_CP_IO | ARM_CP_ALIAS,
|
|
.access = PL2_RW, .accessfn = e2h_access,
|
|
.fieldoffset = offsetof(CPUARMState, cp15.c14_timer[GTIMER_VIRT].ctl),
|
|
.writefn = gt_virt_ctl_write, .raw_writefn = raw_write },
|
|
{ .name = "CNTP_TVAL_EL02", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 3, .opc1 = 5, .crn = 14, .crm = 2, .opc2 = 0,
|
|
.type = ARM_CP_NO_RAW | ARM_CP_IO | ARM_CP_ALIAS,
|
|
.access = PL2_RW, .accessfn = e2h_access,
|
|
.readfn = gt_phys_tval_read, .writefn = gt_phys_tval_write },
|
|
{ .name = "CNTV_TVAL_EL02", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 3, .opc1 = 5, .crn = 14, .crm = 3, .opc2 = 0,
|
|
.type = ARM_CP_NO_RAW | ARM_CP_IO | ARM_CP_ALIAS,
|
|
.access = PL2_RW, .accessfn = e2h_access,
|
|
.readfn = gt_virt_tval_read, .writefn = gt_virt_tval_write },
|
|
{ .name = "CNTP_CVAL_EL02", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 3, .opc1 = 5, .crn = 14, .crm = 2, .opc2 = 2,
|
|
.type = ARM_CP_IO | ARM_CP_ALIAS,
|
|
.fieldoffset = offsetof(CPUARMState, cp15.c14_timer[GTIMER_PHYS].cval),
|
|
.access = PL2_RW, .accessfn = e2h_access,
|
|
.writefn = gt_phys_cval_write, .raw_writefn = raw_write },
|
|
{ .name = "CNTV_CVAL_EL02", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 3, .opc1 = 5, .crn = 14, .crm = 3, .opc2 = 2,
|
|
.type = ARM_CP_IO | ARM_CP_ALIAS,
|
|
.fieldoffset = offsetof(CPUARMState, cp15.c14_timer[GTIMER_VIRT].cval),
|
|
.access = PL2_RW, .accessfn = e2h_access,
|
|
.writefn = gt_virt_cval_write, .raw_writefn = raw_write },
|
|
#endif
|
|
REGINFO_SENTINEL
|
|
};
|
|
|
|
#ifndef CONFIG_USER_ONLY
|
|
static const ARMCPRegInfo ats1e1_reginfo[] = {
|
|
{ .name = "AT_S1E1R", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 1, .opc1 = 0, .crn = 7, .crm = 9, .opc2 = 0,
|
|
.access = PL1_W, .type = ARM_CP_NO_RAW | ARM_CP_RAISES_EXC,
|
|
.writefn = ats_write64 },
|
|
{ .name = "AT_S1E1W", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 1, .opc1 = 0, .crn = 7, .crm = 9, .opc2 = 1,
|
|
.access = PL1_W, .type = ARM_CP_NO_RAW | ARM_CP_RAISES_EXC,
|
|
.writefn = ats_write64 },
|
|
REGINFO_SENTINEL
|
|
};
|
|
|
|
static const ARMCPRegInfo ats1cp_reginfo[] = {
|
|
{ .name = "ATS1CPRP",
|
|
.cp = 15, .opc1 = 0, .crn = 7, .crm = 9, .opc2 = 0,
|
|
.access = PL1_W, .type = ARM_CP_NO_RAW | ARM_CP_RAISES_EXC,
|
|
.writefn = ats_write },
|
|
{ .name = "ATS1CPWP",
|
|
.cp = 15, .opc1 = 0, .crn = 7, .crm = 9, .opc2 = 1,
|
|
.access = PL1_W, .type = ARM_CP_NO_RAW | ARM_CP_RAISES_EXC,
|
|
.writefn = ats_write },
|
|
REGINFO_SENTINEL
|
|
};
|
|
#endif
|
|
|
|
void register_cp_regs_for_features(ARMCPU *cpu)
|
|
{
|
|
/* Register all the coprocessor registers based on feature bits */
|
|
CPUARMState *env = &cpu->env;
|
|
if (arm_feature(env, ARM_FEATURE_M)) {
|
|
/* M profile has no coprocessor registers */
|
|
return;
|
|
}
|
|
|
|
define_arm_cp_regs(cpu, cp_reginfo);
|
|
if (!arm_feature(env, ARM_FEATURE_V8)) {
|
|
/* Must go early as it is full of wildcards that may be
|
|
* overridden by later definitions.
|
|
*/
|
|
define_arm_cp_regs(cpu, not_v8_cp_reginfo);
|
|
}
|
|
|
|
if (arm_feature(env, ARM_FEATURE_V6)) {
|
|
/* The ID registers all have impdef reset values */
|
|
ARMCPRegInfo v6_idregs[] = {
|
|
{ .name = "ID_PFR0", .state = ARM_CP_STATE_BOTH,
|
|
.opc0 = 3, .opc1 = 0, .crn = 0, .crm = 1, .opc2 = 0,
|
|
.access = PL1_R, .type = ARM_CP_CONST,
|
|
.accessfn = access_aa32_tid3,
|
|
.resetvalue = cpu->id_pfr0 },
|
|
/* ID_PFR1 is not a plain ARM_CP_CONST because we don't know
|
|
* the value of the GIC field until after we define these regs.
|
|
*/
|
|
{ .name = "ID_PFR1", .state = ARM_CP_STATE_BOTH,
|
|
.opc0 = 3, .opc1 = 0, .crn = 0, .crm = 1, .opc2 = 1,
|
|
.access = PL1_R, .type = ARM_CP_NO_RAW,
|
|
.accessfn = access_aa32_tid3,
|
|
.readfn = id_pfr1_read,
|
|
.writefn = arm_cp_write_ignore },
|
|
{ .name = "ID_DFR0", .state = ARM_CP_STATE_BOTH,
|
|
.opc0 = 3, .opc1 = 0, .crn = 0, .crm = 1, .opc2 = 2,
|
|
.access = PL1_R, .type = ARM_CP_CONST,
|
|
.accessfn = access_aa32_tid3,
|
|
.resetvalue = cpu->isar.id_dfr0 },
|
|
{ .name = "ID_AFR0", .state = ARM_CP_STATE_BOTH,
|
|
.opc0 = 3, .opc1 = 0, .crn = 0, .crm = 1, .opc2 = 3,
|
|
.access = PL1_R, .type = ARM_CP_CONST,
|
|
.accessfn = access_aa32_tid3,
|
|
.resetvalue = cpu->id_afr0 },
|
|
{ .name = "ID_MMFR0", .state = ARM_CP_STATE_BOTH,
|
|
.opc0 = 3, .opc1 = 0, .crn = 0, .crm = 1, .opc2 = 4,
|
|
.access = PL1_R, .type = ARM_CP_CONST,
|
|
.accessfn = access_aa32_tid3,
|
|
.resetvalue = cpu->id_mmfr0 },
|
|
{ .name = "ID_MMFR1", .state = ARM_CP_STATE_BOTH,
|
|
.opc0 = 3, .opc1 = 0, .crn = 0, .crm = 1, .opc2 = 5,
|
|
.access = PL1_R, .type = ARM_CP_CONST,
|
|
.accessfn = access_aa32_tid3,
|
|
.resetvalue = cpu->id_mmfr1 },
|
|
{ .name = "ID_MMFR2", .state = ARM_CP_STATE_BOTH,
|
|
.opc0 = 3, .opc1 = 0, .crn = 0, .crm = 1, .opc2 = 6,
|
|
.access = PL1_R, .type = ARM_CP_CONST,
|
|
.accessfn = access_aa32_tid3,
|
|
.resetvalue = cpu->id_mmfr2 },
|
|
{ .name = "ID_MMFR3", .state = ARM_CP_STATE_BOTH,
|
|
.opc0 = 3, .opc1 = 0, .crn = 0, .crm = 1, .opc2 = 7,
|
|
.access = PL1_R, .type = ARM_CP_CONST,
|
|
.accessfn = access_aa32_tid3,
|
|
.resetvalue = cpu->id_mmfr3 },
|
|
{ .name = "ID_ISAR0", .state = ARM_CP_STATE_BOTH,
|
|
.opc0 = 3, .opc1 = 0, .crn = 0, .crm = 2, .opc2 = 0,
|
|
.access = PL1_R, .type = ARM_CP_CONST,
|
|
.accessfn = access_aa32_tid3,
|
|
.resetvalue = cpu->isar.id_isar0 },
|
|
{ .name = "ID_ISAR1", .state = ARM_CP_STATE_BOTH,
|
|
.opc0 = 3, .opc1 = 0, .crn = 0, .crm = 2, .opc2 = 1,
|
|
.access = PL1_R, .type = ARM_CP_CONST,
|
|
.accessfn = access_aa32_tid3,
|
|
.resetvalue = cpu->isar.id_isar1 },
|
|
{ .name = "ID_ISAR2", .state = ARM_CP_STATE_BOTH,
|
|
.opc0 = 3, .opc1 = 0, .crn = 0, .crm = 2, .opc2 = 2,
|
|
.access = PL1_R, .type = ARM_CP_CONST,
|
|
.accessfn = access_aa32_tid3,
|
|
.resetvalue = cpu->isar.id_isar2 },
|
|
{ .name = "ID_ISAR3", .state = ARM_CP_STATE_BOTH,
|
|
.opc0 = 3, .opc1 = 0, .crn = 0, .crm = 2, .opc2 = 3,
|
|
.access = PL1_R, .type = ARM_CP_CONST,
|
|
.accessfn = access_aa32_tid3,
|
|
.resetvalue = cpu->isar.id_isar3 },
|
|
{ .name = "ID_ISAR4", .state = ARM_CP_STATE_BOTH,
|
|
.opc0 = 3, .opc1 = 0, .crn = 0, .crm = 2, .opc2 = 4,
|
|
.access = PL1_R, .type = ARM_CP_CONST,
|
|
.accessfn = access_aa32_tid3,
|
|
.resetvalue = cpu->isar.id_isar4 },
|
|
{ .name = "ID_ISAR5", .state = ARM_CP_STATE_BOTH,
|
|
.opc0 = 3, .opc1 = 0, .crn = 0, .crm = 2, .opc2 = 5,
|
|
.access = PL1_R, .type = ARM_CP_CONST,
|
|
.accessfn = access_aa32_tid3,
|
|
.resetvalue = cpu->isar.id_isar5 },
|
|
{ .name = "ID_MMFR4", .state = ARM_CP_STATE_BOTH,
|
|
.opc0 = 3, .opc1 = 0, .crn = 0, .crm = 2, .opc2 = 6,
|
|
.access = PL1_R, .type = ARM_CP_CONST,
|
|
.accessfn = access_aa32_tid3,
|
|
.resetvalue = cpu->id_mmfr4 },
|
|
{ .name = "ID_ISAR6", .state = ARM_CP_STATE_BOTH,
|
|
.opc0 = 3, .opc1 = 0, .crn = 0, .crm = 2, .opc2 = 7,
|
|
.access = PL1_R, .type = ARM_CP_CONST,
|
|
.accessfn = access_aa32_tid3,
|
|
.resetvalue = cpu->isar.id_isar6 },
|
|
REGINFO_SENTINEL
|
|
};
|
|
define_arm_cp_regs(cpu, v6_idregs);
|
|
define_arm_cp_regs(cpu, v6_cp_reginfo);
|
|
} else {
|
|
define_arm_cp_regs(cpu, not_v6_cp_reginfo);
|
|
}
|
|
if (arm_feature(env, ARM_FEATURE_V6K)) {
|
|
define_arm_cp_regs(cpu, v6k_cp_reginfo);
|
|
}
|
|
if (arm_feature(env, ARM_FEATURE_V7MP) &&
|
|
!arm_feature(env, ARM_FEATURE_PMSA)) {
|
|
define_arm_cp_regs(cpu, v7mp_cp_reginfo);
|
|
}
|
|
if (arm_feature(env, ARM_FEATURE_V7VE)) {
|
|
define_arm_cp_regs(cpu, pmovsset_cp_reginfo);
|
|
}
|
|
if (arm_feature(env, ARM_FEATURE_V7)) {
|
|
ARMCPRegInfo clidr = {
|
|
.name = "CLIDR", .state = ARM_CP_STATE_BOTH,
|
|
.opc0 = 3, .crn = 0, .crm = 0, .opc1 = 1, .opc2 = 1,
|
|
.access = PL1_R, .type = ARM_CP_CONST,
|
|
.accessfn = access_aa64_tid2,
|
|
.resetvalue = cpu->clidr
|
|
};
|
|
define_one_arm_cp_reg(cpu, &clidr);
|
|
define_arm_cp_regs(cpu, v7_cp_reginfo);
|
|
define_debug_regs(cpu);
|
|
define_pmu_regs(cpu);
|
|
} else {
|
|
define_arm_cp_regs(cpu, not_v7_cp_reginfo);
|
|
}
|
|
if (arm_feature(env, ARM_FEATURE_V8)) {
|
|
/* AArch64 ID registers, which all have impdef reset values.
|
|
* Note that within the ID register ranges the unused slots
|
|
* must all RAZ, not UNDEF; future architecture versions may
|
|
* define new registers here.
|
|
*/
|
|
ARMCPRegInfo v8_idregs[] = {
|
|
/* ID_AA64PFR0_EL1 is not a plain ARM_CP_CONST because we don't
|
|
* know the right value for the GIC field until after we
|
|
* define these regs.
|
|
*/
|
|
{ .name = "ID_AA64PFR0_EL1", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 3, .opc1 = 0, .crn = 0, .crm = 4, .opc2 = 0,
|
|
.access = PL1_R, .type = ARM_CP_NO_RAW,
|
|
.accessfn = access_aa64_tid3,
|
|
.readfn = id_aa64pfr0_read,
|
|
.writefn = arm_cp_write_ignore },
|
|
{ .name = "ID_AA64PFR1_EL1", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 3, .opc1 = 0, .crn = 0, .crm = 4, .opc2 = 1,
|
|
.access = PL1_R, .type = ARM_CP_CONST,
|
|
.accessfn = access_aa64_tid3,
|
|
.resetvalue = cpu->isar.id_aa64pfr1},
|
|
{ .name = "ID_AA64PFR2_EL1_RESERVED", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 3, .opc1 = 0, .crn = 0, .crm = 4, .opc2 = 2,
|
|
.access = PL1_R, .type = ARM_CP_CONST,
|
|
.accessfn = access_aa64_tid3,
|
|
.resetvalue = 0 },
|
|
{ .name = "ID_AA64PFR3_EL1_RESERVED", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 3, .opc1 = 0, .crn = 0, .crm = 4, .opc2 = 3,
|
|
.access = PL1_R, .type = ARM_CP_CONST,
|
|
.accessfn = access_aa64_tid3,
|
|
.resetvalue = 0 },
|
|
{ .name = "ID_AA64ZFR0_EL1", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 3, .opc1 = 0, .crn = 0, .crm = 4, .opc2 = 4,
|
|
.access = PL1_R, .type = ARM_CP_CONST,
|
|
.accessfn = access_aa64_tid3,
|
|
/* At present, only SVEver == 0 is defined anyway. */
|
|
.resetvalue = 0 },
|
|
{ .name = "ID_AA64PFR5_EL1_RESERVED", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 3, .opc1 = 0, .crn = 0, .crm = 4, .opc2 = 5,
|
|
.access = PL1_R, .type = ARM_CP_CONST,
|
|
.accessfn = access_aa64_tid3,
|
|
.resetvalue = 0 },
|
|
{ .name = "ID_AA64PFR6_EL1_RESERVED", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 3, .opc1 = 0, .crn = 0, .crm = 4, .opc2 = 6,
|
|
.access = PL1_R, .type = ARM_CP_CONST,
|
|
.accessfn = access_aa64_tid3,
|
|
.resetvalue = 0 },
|
|
{ .name = "ID_AA64PFR7_EL1_RESERVED", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 3, .opc1 = 0, .crn = 0, .crm = 4, .opc2 = 7,
|
|
.access = PL1_R, .type = ARM_CP_CONST,
|
|
.accessfn = access_aa64_tid3,
|
|
.resetvalue = 0 },
|
|
{ .name = "ID_AA64DFR0_EL1", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 3, .opc1 = 0, .crn = 0, .crm = 5, .opc2 = 0,
|
|
.access = PL1_R, .type = ARM_CP_CONST,
|
|
.accessfn = access_aa64_tid3,
|
|
.resetvalue = cpu->isar.id_aa64dfr0 },
|
|
{ .name = "ID_AA64DFR1_EL1", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 3, .opc1 = 0, .crn = 0, .crm = 5, .opc2 = 1,
|
|
.access = PL1_R, .type = ARM_CP_CONST,
|
|
.accessfn = access_aa64_tid3,
|
|
.resetvalue = cpu->isar.id_aa64dfr1 },
|
|
{ .name = "ID_AA64DFR2_EL1_RESERVED", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 3, .opc1 = 0, .crn = 0, .crm = 5, .opc2 = 2,
|
|
.access = PL1_R, .type = ARM_CP_CONST,
|
|
.accessfn = access_aa64_tid3,
|
|
.resetvalue = 0 },
|
|
{ .name = "ID_AA64DFR3_EL1_RESERVED", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 3, .opc1 = 0, .crn = 0, .crm = 5, .opc2 = 3,
|
|
.access = PL1_R, .type = ARM_CP_CONST,
|
|
.accessfn = access_aa64_tid3,
|
|
.resetvalue = 0 },
|
|
{ .name = "ID_AA64AFR0_EL1", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 3, .opc1 = 0, .crn = 0, .crm = 5, .opc2 = 4,
|
|
.access = PL1_R, .type = ARM_CP_CONST,
|
|
.accessfn = access_aa64_tid3,
|
|
.resetvalue = cpu->id_aa64afr0 },
|
|
{ .name = "ID_AA64AFR1_EL1", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 3, .opc1 = 0, .crn = 0, .crm = 5, .opc2 = 5,
|
|
.access = PL1_R, .type = ARM_CP_CONST,
|
|
.accessfn = access_aa64_tid3,
|
|
.resetvalue = cpu->id_aa64afr1 },
|
|
{ .name = "ID_AA64AFR2_EL1_RESERVED", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 3, .opc1 = 0, .crn = 0, .crm = 5, .opc2 = 6,
|
|
.access = PL1_R, .type = ARM_CP_CONST,
|
|
.accessfn = access_aa64_tid3,
|
|
.resetvalue = 0 },
|
|
{ .name = "ID_AA64AFR3_EL1_RESERVED", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 3, .opc1 = 0, .crn = 0, .crm = 5, .opc2 = 7,
|
|
.access = PL1_R, .type = ARM_CP_CONST,
|
|
.accessfn = access_aa64_tid3,
|
|
.resetvalue = 0 },
|
|
{ .name = "ID_AA64ISAR0_EL1", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 3, .opc1 = 0, .crn = 0, .crm = 6, .opc2 = 0,
|
|
.access = PL1_R, .type = ARM_CP_CONST,
|
|
.accessfn = access_aa64_tid3,
|
|
.resetvalue = cpu->isar.id_aa64isar0 },
|
|
{ .name = "ID_AA64ISAR1_EL1", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 3, .opc1 = 0, .crn = 0, .crm = 6, .opc2 = 1,
|
|
.access = PL1_R, .type = ARM_CP_CONST,
|
|
.accessfn = access_aa64_tid3,
|
|
.resetvalue = cpu->isar.id_aa64isar1 },
|
|
{ .name = "ID_AA64ISAR2_EL1_RESERVED", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 3, .opc1 = 0, .crn = 0, .crm = 6, .opc2 = 2,
|
|
.access = PL1_R, .type = ARM_CP_CONST,
|
|
.accessfn = access_aa64_tid3,
|
|
.resetvalue = 0 },
|
|
{ .name = "ID_AA64ISAR3_EL1_RESERVED", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 3, .opc1 = 0, .crn = 0, .crm = 6, .opc2 = 3,
|
|
.access = PL1_R, .type = ARM_CP_CONST,
|
|
.accessfn = access_aa64_tid3,
|
|
.resetvalue = 0 },
|
|
{ .name = "ID_AA64ISAR4_EL1_RESERVED", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 3, .opc1 = 0, .crn = 0, .crm = 6, .opc2 = 4,
|
|
.access = PL1_R, .type = ARM_CP_CONST,
|
|
.accessfn = access_aa64_tid3,
|
|
.resetvalue = 0 },
|
|
{ .name = "ID_AA64ISAR5_EL1_RESERVED", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 3, .opc1 = 0, .crn = 0, .crm = 6, .opc2 = 5,
|
|
.access = PL1_R, .type = ARM_CP_CONST,
|
|
.accessfn = access_aa64_tid3,
|
|
.resetvalue = 0 },
|
|
{ .name = "ID_AA64ISAR6_EL1_RESERVED", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 3, .opc1 = 0, .crn = 0, .crm = 6, .opc2 = 6,
|
|
.access = PL1_R, .type = ARM_CP_CONST,
|
|
.accessfn = access_aa64_tid3,
|
|
.resetvalue = 0 },
|
|
{ .name = "ID_AA64ISAR7_EL1_RESERVED", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 3, .opc1 = 0, .crn = 0, .crm = 6, .opc2 = 7,
|
|
.access = PL1_R, .type = ARM_CP_CONST,
|
|
.accessfn = access_aa64_tid3,
|
|
.resetvalue = 0 },
|
|
{ .name = "ID_AA64MMFR0_EL1", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 3, .opc1 = 0, .crn = 0, .crm = 7, .opc2 = 0,
|
|
.access = PL1_R, .type = ARM_CP_CONST,
|
|
.accessfn = access_aa64_tid3,
|
|
.resetvalue = cpu->isar.id_aa64mmfr0 },
|
|
{ .name = "ID_AA64MMFR1_EL1", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 3, .opc1 = 0, .crn = 0, .crm = 7, .opc2 = 1,
|
|
.access = PL1_R, .type = ARM_CP_CONST,
|
|
.accessfn = access_aa64_tid3,
|
|
.resetvalue = cpu->isar.id_aa64mmfr1 },
|
|
{ .name = "ID_AA64MMFR2_EL1", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 3, .opc1 = 0, .crn = 0, .crm = 7, .opc2 = 2,
|
|
.access = PL1_R, .type = ARM_CP_CONST,
|
|
.accessfn = access_aa64_tid3,
|
|
.resetvalue = cpu->isar.id_aa64mmfr2 },
|
|
{ .name = "ID_AA64MMFR3_EL1_RESERVED", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 3, .opc1 = 0, .crn = 0, .crm = 7, .opc2 = 3,
|
|
.access = PL1_R, .type = ARM_CP_CONST,
|
|
.accessfn = access_aa64_tid3,
|
|
.resetvalue = 0 },
|
|
{ .name = "ID_AA64MMFR4_EL1_RESERVED", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 3, .opc1 = 0, .crn = 0, .crm = 7, .opc2 = 4,
|
|
.access = PL1_R, .type = ARM_CP_CONST,
|
|
.accessfn = access_aa64_tid3,
|
|
.resetvalue = 0 },
|
|
{ .name = "ID_AA64MMFR5_EL1_RESERVED", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 3, .opc1 = 0, .crn = 0, .crm = 7, .opc2 = 5,
|
|
.access = PL1_R, .type = ARM_CP_CONST,
|
|
.accessfn = access_aa64_tid3,
|
|
.resetvalue = 0 },
|
|
{ .name = "ID_AA64MMFR6_EL1_RESERVED", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 3, .opc1 = 0, .crn = 0, .crm = 7, .opc2 = 6,
|
|
.access = PL1_R, .type = ARM_CP_CONST,
|
|
.accessfn = access_aa64_tid3,
|
|
.resetvalue = 0 },
|
|
{ .name = "ID_AA64MMFR7_EL1_RESERVED", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 3, .opc1 = 0, .crn = 0, .crm = 7, .opc2 = 7,
|
|
.access = PL1_R, .type = ARM_CP_CONST,
|
|
.accessfn = access_aa64_tid3,
|
|
.resetvalue = 0 },
|
|
{ .name = "MVFR0_EL1", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 3, .opc1 = 0, .crn = 0, .crm = 3, .opc2 = 0,
|
|
.access = PL1_R, .type = ARM_CP_CONST,
|
|
.accessfn = access_aa64_tid3,
|
|
.resetvalue = cpu->isar.mvfr0 },
|
|
{ .name = "MVFR1_EL1", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 3, .opc1 = 0, .crn = 0, .crm = 3, .opc2 = 1,
|
|
.access = PL1_R, .type = ARM_CP_CONST,
|
|
.accessfn = access_aa64_tid3,
|
|
.resetvalue = cpu->isar.mvfr1 },
|
|
{ .name = "MVFR2_EL1", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 3, .opc1 = 0, .crn = 0, .crm = 3, .opc2 = 2,
|
|
.access = PL1_R, .type = ARM_CP_CONST,
|
|
.accessfn = access_aa64_tid3,
|
|
.resetvalue = cpu->isar.mvfr2 },
|
|
{ .name = "MVFR3_EL1_RESERVED", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 3, .opc1 = 0, .crn = 0, .crm = 3, .opc2 = 3,
|
|
.access = PL1_R, .type = ARM_CP_CONST,
|
|
.accessfn = access_aa64_tid3,
|
|
.resetvalue = 0 },
|
|
{ .name = "MVFR4_EL1_RESERVED", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 3, .opc1 = 0, .crn = 0, .crm = 3, .opc2 = 4,
|
|
.access = PL1_R, .type = ARM_CP_CONST,
|
|
.accessfn = access_aa64_tid3,
|
|
.resetvalue = 0 },
|
|
{ .name = "MVFR5_EL1_RESERVED", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 3, .opc1 = 0, .crn = 0, .crm = 3, .opc2 = 5,
|
|
.access = PL1_R, .type = ARM_CP_CONST,
|
|
.accessfn = access_aa64_tid3,
|
|
.resetvalue = 0 },
|
|
{ .name = "MVFR6_EL1_RESERVED", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 3, .opc1 = 0, .crn = 0, .crm = 3, .opc2 = 6,
|
|
.access = PL1_R, .type = ARM_CP_CONST,
|
|
.accessfn = access_aa64_tid3,
|
|
.resetvalue = 0 },
|
|
{ .name = "MVFR7_EL1_RESERVED", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 3, .opc1 = 0, .crn = 0, .crm = 3, .opc2 = 7,
|
|
.access = PL1_R, .type = ARM_CP_CONST,
|
|
.accessfn = access_aa64_tid3,
|
|
.resetvalue = 0 },
|
|
{ .name = "PMCEID0", .state = ARM_CP_STATE_AA32,
|
|
.cp = 15, .opc1 = 0, .crn = 9, .crm = 12, .opc2 = 6,
|
|
.access = PL0_R, .accessfn = pmreg_access, .type = ARM_CP_CONST,
|
|
.resetvalue = extract64(cpu->pmceid0, 0, 32) },
|
|
{ .name = "PMCEID0_EL0", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 3, .opc1 = 3, .crn = 9, .crm = 12, .opc2 = 6,
|
|
.access = PL0_R, .accessfn = pmreg_access, .type = ARM_CP_CONST,
|
|
.resetvalue = cpu->pmceid0 },
|
|
{ .name = "PMCEID1", .state = ARM_CP_STATE_AA32,
|
|
.cp = 15, .opc1 = 0, .crn = 9, .crm = 12, .opc2 = 7,
|
|
.access = PL0_R, .accessfn = pmreg_access, .type = ARM_CP_CONST,
|
|
.resetvalue = extract64(cpu->pmceid1, 0, 32) },
|
|
{ .name = "PMCEID1_EL0", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 3, .opc1 = 3, .crn = 9, .crm = 12, .opc2 = 7,
|
|
.access = PL0_R, .accessfn = pmreg_access, .type = ARM_CP_CONST,
|
|
.resetvalue = cpu->pmceid1 },
|
|
REGINFO_SENTINEL
|
|
};
|
|
#ifdef CONFIG_USER_ONLY
|
|
ARMCPRegUserSpaceInfo v8_user_idregs[] = {
|
|
{ .name = "ID_AA64PFR0_EL1",
|
|
.exported_bits = 0x000f000f00ff0000,
|
|
.fixed_bits = 0x0000000000000011 },
|
|
{ .name = "ID_AA64PFR1_EL1",
|
|
.exported_bits = 0x00000000000000f0 },
|
|
{ .name = "ID_AA64PFR*_EL1_RESERVED",
|
|
.is_glob = true },
|
|
{ .name = "ID_AA64ZFR0_EL1" },
|
|
{ .name = "ID_AA64MMFR0_EL1",
|
|
.fixed_bits = 0x00000000ff000000 },
|
|
{ .name = "ID_AA64MMFR1_EL1" },
|
|
{ .name = "ID_AA64MMFR*_EL1_RESERVED",
|
|
.is_glob = true },
|
|
{ .name = "ID_AA64DFR0_EL1",
|
|
.fixed_bits = 0x0000000000000006 },
|
|
{ .name = "ID_AA64DFR1_EL1" },
|
|
{ .name = "ID_AA64DFR*_EL1_RESERVED",
|
|
.is_glob = true },
|
|
{ .name = "ID_AA64AFR*",
|
|
.is_glob = true },
|
|
{ .name = "ID_AA64ISAR0_EL1",
|
|
.exported_bits = 0x00fffffff0fffff0 },
|
|
{ .name = "ID_AA64ISAR1_EL1",
|
|
.exported_bits = 0x000000f0ffffffff },
|
|
{ .name = "ID_AA64ISAR*_EL1_RESERVED",
|
|
.is_glob = true },
|
|
REGUSERINFO_SENTINEL
|
|
};
|
|
modify_arm_cp_regs(v8_idregs, v8_user_idregs);
|
|
#endif
|
|
/* RVBAR_EL1 is only implemented if EL1 is the highest EL */
|
|
if (!arm_feature(env, ARM_FEATURE_EL3) &&
|
|
!arm_feature(env, ARM_FEATURE_EL2)) {
|
|
ARMCPRegInfo rvbar = {
|
|
.name = "RVBAR_EL1", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 3, .opc1 = 0, .crn = 12, .crm = 0, .opc2 = 1,
|
|
.type = ARM_CP_CONST, .access = PL1_R, .resetvalue = cpu->rvbar
|
|
};
|
|
define_one_arm_cp_reg(cpu, &rvbar);
|
|
}
|
|
define_arm_cp_regs(cpu, v8_idregs);
|
|
define_arm_cp_regs(cpu, v8_cp_reginfo);
|
|
}
|
|
if (arm_feature(env, ARM_FEATURE_EL2)) {
|
|
uint64_t vmpidr_def = mpidr_read_val(env);
|
|
ARMCPRegInfo vpidr_regs[] = {
|
|
{ .name = "VPIDR", .state = ARM_CP_STATE_AA32,
|
|
.cp = 15, .opc1 = 4, .crn = 0, .crm = 0, .opc2 = 0,
|
|
.access = PL2_RW, .accessfn = access_el3_aa32ns,
|
|
.resetvalue = cpu->midr, .type = ARM_CP_ALIAS,
|
|
.fieldoffset = offsetoflow32(CPUARMState, cp15.vpidr_el2) },
|
|
{ .name = "VPIDR_EL2", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 3, .opc1 = 4, .crn = 0, .crm = 0, .opc2 = 0,
|
|
.access = PL2_RW, .resetvalue = cpu->midr,
|
|
.fieldoffset = offsetof(CPUARMState, cp15.vpidr_el2) },
|
|
{ .name = "VMPIDR", .state = ARM_CP_STATE_AA32,
|
|
.cp = 15, .opc1 = 4, .crn = 0, .crm = 0, .opc2 = 5,
|
|
.access = PL2_RW, .accessfn = access_el3_aa32ns,
|
|
.resetvalue = vmpidr_def, .type = ARM_CP_ALIAS,
|
|
.fieldoffset = offsetoflow32(CPUARMState, cp15.vmpidr_el2) },
|
|
{ .name = "VMPIDR_EL2", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 3, .opc1 = 4, .crn = 0, .crm = 0, .opc2 = 5,
|
|
.access = PL2_RW,
|
|
.resetvalue = vmpidr_def,
|
|
.fieldoffset = offsetof(CPUARMState, cp15.vmpidr_el2) },
|
|
REGINFO_SENTINEL
|
|
};
|
|
define_arm_cp_regs(cpu, vpidr_regs);
|
|
define_arm_cp_regs(cpu, el2_cp_reginfo);
|
|
if (arm_feature(env, ARM_FEATURE_V8)) {
|
|
define_arm_cp_regs(cpu, el2_v8_cp_reginfo);
|
|
}
|
|
/* RVBAR_EL2 is only implemented if EL2 is the highest EL */
|
|
if (!arm_feature(env, ARM_FEATURE_EL3)) {
|
|
ARMCPRegInfo rvbar = {
|
|
.name = "RVBAR_EL2", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 3, .opc1 = 4, .crn = 12, .crm = 0, .opc2 = 1,
|
|
.type = ARM_CP_CONST, .access = PL2_R, .resetvalue = cpu->rvbar
|
|
};
|
|
define_one_arm_cp_reg(cpu, &rvbar);
|
|
}
|
|
} else {
|
|
/* If EL2 is missing but higher ELs are enabled, we need to
|
|
* register the no_el2 reginfos.
|
|
*/
|
|
if (arm_feature(env, ARM_FEATURE_EL3)) {
|
|
/* When EL3 exists but not EL2, VPIDR and VMPIDR take the value
|
|
* of MIDR_EL1 and MPIDR_EL1.
|
|
*/
|
|
ARMCPRegInfo vpidr_regs[] = {
|
|
{ .name = "VPIDR_EL2", .state = ARM_CP_STATE_BOTH,
|
|
.opc0 = 3, .opc1 = 4, .crn = 0, .crm = 0, .opc2 = 0,
|
|
.access = PL2_RW, .accessfn = access_el3_aa32ns_aa64any,
|
|
.type = ARM_CP_CONST, .resetvalue = cpu->midr,
|
|
.fieldoffset = offsetof(CPUARMState, cp15.vpidr_el2) },
|
|
{ .name = "VMPIDR_EL2", .state = ARM_CP_STATE_BOTH,
|
|
.opc0 = 3, .opc1 = 4, .crn = 0, .crm = 0, .opc2 = 5,
|
|
.access = PL2_RW, .accessfn = access_el3_aa32ns_aa64any,
|
|
.type = ARM_CP_NO_RAW,
|
|
.writefn = arm_cp_write_ignore, .readfn = mpidr_read },
|
|
REGINFO_SENTINEL
|
|
};
|
|
define_arm_cp_regs(cpu, vpidr_regs);
|
|
define_arm_cp_regs(cpu, el3_no_el2_cp_reginfo);
|
|
if (arm_feature(env, ARM_FEATURE_V8)) {
|
|
define_arm_cp_regs(cpu, el3_no_el2_v8_cp_reginfo);
|
|
}
|
|
}
|
|
}
|
|
if (arm_feature(env, ARM_FEATURE_EL3)) {
|
|
define_arm_cp_regs(cpu, el3_cp_reginfo);
|
|
ARMCPRegInfo el3_regs[] = {
|
|
{ .name = "RVBAR_EL3", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 3, .opc1 = 6, .crn = 12, .crm = 0, .opc2 = 1,
|
|
.type = ARM_CP_CONST, .access = PL3_R, .resetvalue = cpu->rvbar },
|
|
{ .name = "SCTLR_EL3", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 3, .opc1 = 6, .crn = 1, .crm = 0, .opc2 = 0,
|
|
.access = PL3_RW,
|
|
.raw_writefn = raw_write, .writefn = sctlr_write,
|
|
.fieldoffset = offsetof(CPUARMState, cp15.sctlr_el[3]),
|
|
.resetvalue = cpu->reset_sctlr },
|
|
REGINFO_SENTINEL
|
|
};
|
|
|
|
define_arm_cp_regs(cpu, el3_regs);
|
|
}
|
|
/* The behaviour of NSACR is sufficiently various that we don't
|
|
* try to describe it in a single reginfo:
|
|
* if EL3 is 64 bit, then trap to EL3 from S EL1,
|
|
* reads as constant 0xc00 from NS EL1 and NS EL2
|
|
* if EL3 is 32 bit, then RW at EL3, RO at NS EL1 and NS EL2
|
|
* if v7 without EL3, register doesn't exist
|
|
* if v8 without EL3, reads as constant 0xc00 from NS EL1 and NS EL2
|
|
*/
|
|
if (arm_feature(env, ARM_FEATURE_EL3)) {
|
|
if (arm_feature(env, ARM_FEATURE_AARCH64)) {
|
|
ARMCPRegInfo nsacr = {
|
|
.name = "NSACR", .type = ARM_CP_CONST,
|
|
.cp = 15, .opc1 = 0, .crn = 1, .crm = 1, .opc2 = 2,
|
|
.access = PL1_RW, .accessfn = nsacr_access,
|
|
.resetvalue = 0xc00
|
|
};
|
|
define_one_arm_cp_reg(cpu, &nsacr);
|
|
} else {
|
|
ARMCPRegInfo nsacr = {
|
|
.name = "NSACR",
|
|
.cp = 15, .opc1 = 0, .crn = 1, .crm = 1, .opc2 = 2,
|
|
.access = PL3_RW | PL1_R,
|
|
.resetvalue = 0,
|
|
.fieldoffset = offsetof(CPUARMState, cp15.nsacr)
|
|
};
|
|
define_one_arm_cp_reg(cpu, &nsacr);
|
|
}
|
|
} else {
|
|
if (arm_feature(env, ARM_FEATURE_V8)) {
|
|
ARMCPRegInfo nsacr = {
|
|
.name = "NSACR", .type = ARM_CP_CONST,
|
|
.cp = 15, .opc1 = 0, .crn = 1, .crm = 1, .opc2 = 2,
|
|
.access = PL1_R,
|
|
.resetvalue = 0xc00
|
|
};
|
|
define_one_arm_cp_reg(cpu, &nsacr);
|
|
}
|
|
}
|
|
|
|
if (arm_feature(env, ARM_FEATURE_PMSA)) {
|
|
if (arm_feature(env, ARM_FEATURE_V6)) {
|
|
/* PMSAv6 not implemented */
|
|
assert(arm_feature(env, ARM_FEATURE_V7));
|
|
define_arm_cp_regs(cpu, vmsa_pmsa_cp_reginfo);
|
|
define_arm_cp_regs(cpu, pmsav7_cp_reginfo);
|
|
} else {
|
|
define_arm_cp_regs(cpu, pmsav5_cp_reginfo);
|
|
}
|
|
} else {
|
|
define_arm_cp_regs(cpu, vmsa_pmsa_cp_reginfo);
|
|
define_arm_cp_regs(cpu, vmsa_cp_reginfo);
|
|
/* TTCBR2 is introduced with ARMv8.2-A32HPD. */
|
|
if (FIELD_EX32(cpu->id_mmfr4, ID_MMFR4, HPDS) != 0) {
|
|
define_one_arm_cp_reg(cpu, &ttbcr2_reginfo);
|
|
}
|
|
}
|
|
if (arm_feature(env, ARM_FEATURE_THUMB2EE)) {
|
|
define_arm_cp_regs(cpu, t2ee_cp_reginfo);
|
|
}
|
|
if (arm_feature(env, ARM_FEATURE_GENERIC_TIMER)) {
|
|
define_arm_cp_regs(cpu, generic_timer_cp_reginfo);
|
|
}
|
|
if (arm_feature(env, ARM_FEATURE_VAPA)) {
|
|
define_arm_cp_regs(cpu, vapa_cp_reginfo);
|
|
}
|
|
if (arm_feature(env, ARM_FEATURE_CACHE_TEST_CLEAN)) {
|
|
define_arm_cp_regs(cpu, cache_test_clean_cp_reginfo);
|
|
}
|
|
if (arm_feature(env, ARM_FEATURE_CACHE_DIRTY_REG)) {
|
|
define_arm_cp_regs(cpu, cache_dirty_status_cp_reginfo);
|
|
}
|
|
if (arm_feature(env, ARM_FEATURE_CACHE_BLOCK_OPS)) {
|
|
define_arm_cp_regs(cpu, cache_block_ops_cp_reginfo);
|
|
}
|
|
if (arm_feature(env, ARM_FEATURE_OMAPCP)) {
|
|
define_arm_cp_regs(cpu, omap_cp_reginfo);
|
|
}
|
|
if (arm_feature(env, ARM_FEATURE_STRONGARM)) {
|
|
define_arm_cp_regs(cpu, strongarm_cp_reginfo);
|
|
}
|
|
if (arm_feature(env, ARM_FEATURE_XSCALE)) {
|
|
define_arm_cp_regs(cpu, xscale_cp_reginfo);
|
|
}
|
|
if (arm_feature(env, ARM_FEATURE_DUMMY_C15_REGS)) {
|
|
define_arm_cp_regs(cpu, dummy_c15_cp_reginfo);
|
|
}
|
|
if (arm_feature(env, ARM_FEATURE_LPAE)) {
|
|
define_arm_cp_regs(cpu, lpae_cp_reginfo);
|
|
}
|
|
if (cpu_isar_feature(aa32_jazelle, cpu)) {
|
|
define_arm_cp_regs(cpu, jazelle_regs);
|
|
}
|
|
/* Slightly awkwardly, the OMAP and StrongARM cores need all of
|
|
* cp15 crn=0 to be writes-ignored, whereas for other cores they should
|
|
* be read-only (ie write causes UNDEF exception).
|
|
*/
|
|
{
|
|
ARMCPRegInfo id_pre_v8_midr_cp_reginfo[] = {
|
|
/* Pre-v8 MIDR space.
|
|
* Note that the MIDR isn't a simple constant register because
|
|
* of the TI925 behaviour where writes to another register can
|
|
* cause the MIDR value to change.
|
|
*
|
|
* Unimplemented registers in the c15 0 0 0 space default to
|
|
* MIDR. Define MIDR first as this entire space, then CTR, TCMTR
|
|
* and friends override accordingly.
|
|
*/
|
|
{ .name = "MIDR",
|
|
.cp = 15, .crn = 0, .crm = 0, .opc1 = 0, .opc2 = CP_ANY,
|
|
.access = PL1_R, .resetvalue = cpu->midr,
|
|
.writefn = arm_cp_write_ignore, .raw_writefn = raw_write,
|
|
.readfn = midr_read,
|
|
.fieldoffset = offsetof(CPUARMState, cp15.c0_cpuid),
|
|
.type = ARM_CP_OVERRIDE },
|
|
/* crn = 0 op1 = 0 crm = 3..7 : currently unassigned; we RAZ. */
|
|
{ .name = "DUMMY",
|
|
.cp = 15, .crn = 0, .crm = 3, .opc1 = 0, .opc2 = CP_ANY,
|
|
.access = PL1_R, .type = ARM_CP_CONST, .resetvalue = 0 },
|
|
{ .name = "DUMMY",
|
|
.cp = 15, .crn = 0, .crm = 4, .opc1 = 0, .opc2 = CP_ANY,
|
|
.access = PL1_R, .type = ARM_CP_CONST, .resetvalue = 0 },
|
|
{ .name = "DUMMY",
|
|
.cp = 15, .crn = 0, .crm = 5, .opc1 = 0, .opc2 = CP_ANY,
|
|
.access = PL1_R, .type = ARM_CP_CONST, .resetvalue = 0 },
|
|
{ .name = "DUMMY",
|
|
.cp = 15, .crn = 0, .crm = 6, .opc1 = 0, .opc2 = CP_ANY,
|
|
.access = PL1_R, .type = ARM_CP_CONST, .resetvalue = 0 },
|
|
{ .name = "DUMMY",
|
|
.cp = 15, .crn = 0, .crm = 7, .opc1 = 0, .opc2 = CP_ANY,
|
|
.access = PL1_R, .type = ARM_CP_CONST, .resetvalue = 0 },
|
|
REGINFO_SENTINEL
|
|
};
|
|
ARMCPRegInfo id_v8_midr_cp_reginfo[] = {
|
|
{ .name = "MIDR_EL1", .state = ARM_CP_STATE_BOTH,
|
|
.opc0 = 3, .opc1 = 0, .crn = 0, .crm = 0, .opc2 = 0,
|
|
.access = PL1_R, .type = ARM_CP_NO_RAW, .resetvalue = cpu->midr,
|
|
.fieldoffset = offsetof(CPUARMState, cp15.c0_cpuid),
|
|
.readfn = midr_read },
|
|
/* crn = 0 op1 = 0 crm = 0 op2 = 4,7 : AArch32 aliases of MIDR */
|
|
{ .name = "MIDR", .type = ARM_CP_ALIAS | ARM_CP_CONST,
|
|
.cp = 15, .crn = 0, .crm = 0, .opc1 = 0, .opc2 = 4,
|
|
.access = PL1_R, .resetvalue = cpu->midr },
|
|
{ .name = "MIDR", .type = ARM_CP_ALIAS | ARM_CP_CONST,
|
|
.cp = 15, .crn = 0, .crm = 0, .opc1 = 0, .opc2 = 7,
|
|
.access = PL1_R, .resetvalue = cpu->midr },
|
|
{ .name = "REVIDR_EL1", .state = ARM_CP_STATE_BOTH,
|
|
.opc0 = 3, .opc1 = 0, .crn = 0, .crm = 0, .opc2 = 6,
|
|
.access = PL1_R,
|
|
.accessfn = access_aa64_tid1,
|
|
.type = ARM_CP_CONST, .resetvalue = cpu->revidr },
|
|
REGINFO_SENTINEL
|
|
};
|
|
ARMCPRegInfo id_cp_reginfo[] = {
|
|
/* These are common to v8 and pre-v8 */
|
|
{ .name = "CTR",
|
|
.cp = 15, .crn = 0, .crm = 0, .opc1 = 0, .opc2 = 1,
|
|
.access = PL1_R, .accessfn = ctr_el0_access,
|
|
.type = ARM_CP_CONST, .resetvalue = cpu->ctr },
|
|
{ .name = "CTR_EL0", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 3, .opc1 = 3, .opc2 = 1, .crn = 0, .crm = 0,
|
|
.access = PL0_R, .accessfn = ctr_el0_access,
|
|
.type = ARM_CP_CONST, .resetvalue = cpu->ctr },
|
|
/* TCMTR and TLBTR exist in v8 but have no 64-bit versions */
|
|
{ .name = "TCMTR",
|
|
.cp = 15, .crn = 0, .crm = 0, .opc1 = 0, .opc2 = 2,
|
|
.access = PL1_R,
|
|
.accessfn = access_aa32_tid1,
|
|
.type = ARM_CP_CONST, .resetvalue = 0 },
|
|
REGINFO_SENTINEL
|
|
};
|
|
/* TLBTR is specific to VMSA */
|
|
ARMCPRegInfo id_tlbtr_reginfo = {
|
|
.name = "TLBTR",
|
|
.cp = 15, .crn = 0, .crm = 0, .opc1 = 0, .opc2 = 3,
|
|
.access = PL1_R,
|
|
.accessfn = access_aa32_tid1,
|
|
.type = ARM_CP_CONST, .resetvalue = 0,
|
|
};
|
|
/* MPUIR is specific to PMSA V6+ */
|
|
ARMCPRegInfo id_mpuir_reginfo = {
|
|
.name = "MPUIR",
|
|
.cp = 15, .crn = 0, .crm = 0, .opc1 = 0, .opc2 = 4,
|
|
.access = PL1_R, .type = ARM_CP_CONST,
|
|
.resetvalue = cpu->pmsav7_dregion << 8
|
|
};
|
|
ARMCPRegInfo crn0_wi_reginfo = {
|
|
.name = "CRN0_WI", .cp = 15, .crn = 0, .crm = CP_ANY,
|
|
.opc1 = CP_ANY, .opc2 = CP_ANY, .access = PL1_W,
|
|
.type = ARM_CP_NOP | ARM_CP_OVERRIDE
|
|
};
|
|
#ifdef CONFIG_USER_ONLY
|
|
ARMCPRegUserSpaceInfo id_v8_user_midr_cp_reginfo[] = {
|
|
{ .name = "MIDR_EL1",
|
|
.exported_bits = 0x00000000ffffffff },
|
|
{ .name = "REVIDR_EL1" },
|
|
REGUSERINFO_SENTINEL
|
|
};
|
|
modify_arm_cp_regs(id_v8_midr_cp_reginfo, id_v8_user_midr_cp_reginfo);
|
|
#endif
|
|
if (arm_feature(env, ARM_FEATURE_OMAPCP) ||
|
|
arm_feature(env, ARM_FEATURE_STRONGARM)) {
|
|
ARMCPRegInfo *r;
|
|
/* Register the blanket "writes ignored" value first to cover the
|
|
* whole space. Then update the specific ID registers to allow write
|
|
* access, so that they ignore writes rather than causing them to
|
|
* UNDEF.
|
|
*/
|
|
define_one_arm_cp_reg(cpu, &crn0_wi_reginfo);
|
|
for (r = id_pre_v8_midr_cp_reginfo;
|
|
r->type != ARM_CP_SENTINEL; r++) {
|
|
r->access = PL1_RW;
|
|
}
|
|
for (r = id_cp_reginfo; r->type != ARM_CP_SENTINEL; r++) {
|
|
r->access = PL1_RW;
|
|
}
|
|
id_mpuir_reginfo.access = PL1_RW;
|
|
id_tlbtr_reginfo.access = PL1_RW;
|
|
}
|
|
if (arm_feature(env, ARM_FEATURE_V8)) {
|
|
define_arm_cp_regs(cpu, id_v8_midr_cp_reginfo);
|
|
} else {
|
|
define_arm_cp_regs(cpu, id_pre_v8_midr_cp_reginfo);
|
|
}
|
|
define_arm_cp_regs(cpu, id_cp_reginfo);
|
|
if (!arm_feature(env, ARM_FEATURE_PMSA)) {
|
|
define_one_arm_cp_reg(cpu, &id_tlbtr_reginfo);
|
|
} else if (arm_feature(env, ARM_FEATURE_V7)) {
|
|
define_one_arm_cp_reg(cpu, &id_mpuir_reginfo);
|
|
}
|
|
}
|
|
|
|
if (arm_feature(env, ARM_FEATURE_MPIDR)) {
|
|
ARMCPRegInfo mpidr_cp_reginfo[] = {
|
|
{ .name = "MPIDR_EL1", .state = ARM_CP_STATE_BOTH,
|
|
.opc0 = 3, .crn = 0, .crm = 0, .opc1 = 0, .opc2 = 5,
|
|
.access = PL1_R, .readfn = mpidr_read, .type = ARM_CP_NO_RAW },
|
|
REGINFO_SENTINEL
|
|
};
|
|
#ifdef CONFIG_USER_ONLY
|
|
ARMCPRegUserSpaceInfo mpidr_user_cp_reginfo[] = {
|
|
{ .name = "MPIDR_EL1",
|
|
.fixed_bits = 0x0000000080000000 },
|
|
REGUSERINFO_SENTINEL
|
|
};
|
|
modify_arm_cp_regs(mpidr_cp_reginfo, mpidr_user_cp_reginfo);
|
|
#endif
|
|
define_arm_cp_regs(cpu, mpidr_cp_reginfo);
|
|
}
|
|
|
|
if (arm_feature(env, ARM_FEATURE_AUXCR)) {
|
|
ARMCPRegInfo auxcr_reginfo[] = {
|
|
{ .name = "ACTLR_EL1", .state = ARM_CP_STATE_BOTH,
|
|
.opc0 = 3, .opc1 = 0, .crn = 1, .crm = 0, .opc2 = 1,
|
|
.access = PL1_RW, .type = ARM_CP_CONST,
|
|
.resetvalue = cpu->reset_auxcr },
|
|
{ .name = "ACTLR_EL2", .state = ARM_CP_STATE_BOTH,
|
|
.opc0 = 3, .opc1 = 4, .crn = 1, .crm = 0, .opc2 = 1,
|
|
.access = PL2_RW, .type = ARM_CP_CONST,
|
|
.resetvalue = 0 },
|
|
{ .name = "ACTLR_EL3", .state = ARM_CP_STATE_AA64,
|
|
.opc0 = 3, .opc1 = 6, .crn = 1, .crm = 0, .opc2 = 1,
|
|
.access = PL3_RW, .type = ARM_CP_CONST,
|
|
.resetvalue = 0 },
|
|
REGINFO_SENTINEL
|
|
};
|
|
define_arm_cp_regs(cpu, auxcr_reginfo);
|
|
if (arm_feature(env, ARM_FEATURE_V8)) {
|
|
/* HACTLR2 maps to ACTLR_EL2[63:32] and is not in ARMv7 */
|
|
ARMCPRegInfo hactlr2_reginfo = {
|
|
.name = "HACTLR2", .state = ARM_CP_STATE_AA32,
|
|
.cp = 15, .opc1 = 4, .crn = 1, .crm = 0, .opc2 = 3,
|
|
.access = PL2_RW, .type = ARM_CP_CONST,
|
|
.resetvalue = 0
|
|
};
|
|
define_one_arm_cp_reg(cpu, &hactlr2_reginfo);
|
|
}
|
|
}
|
|
|
|
if (arm_feature(env, ARM_FEATURE_CBAR)) {
|
|
/*
|
|
* CBAR is IMPDEF, but common on Arm Cortex-A implementations.
|
|
* There are two flavours:
|
|
* (1) older 32-bit only cores have a simple 32-bit CBAR
|
|
* (2) 64-bit cores have a 64-bit CBAR visible to AArch64, plus a
|
|
* 32-bit register visible to AArch32 at a different encoding
|
|
* to the "flavour 1" register and with the bits rearranged to
|
|
* be able to squash a 64-bit address into the 32-bit view.
|
|
* We distinguish the two via the ARM_FEATURE_AARCH64 flag, but
|
|
* in future if we support AArch32-only configs of some of the
|
|
* AArch64 cores we might need to add a specific feature flag
|
|
* to indicate cores with "flavour 2" CBAR.
|
|
*/
|
|
if (arm_feature(env, ARM_FEATURE_AARCH64)) {
|
|
/* 32 bit view is [31:18] 0...0 [43:32]. */
|
|
uint32_t cbar32 = (extract64(cpu->reset_cbar, 18, 14) << 18)
|
|
| extract64(cpu->reset_cbar, 32, 12);
|
|
ARMCPRegInfo cbar_reginfo[] = {
|
|
{ .name = "CBAR",
|
|
.type = ARM_CP_CONST,
|
|
.cp = 15, .crn = 15, .crm = 3, .opc1 = 1, .opc2 = 0,
|
|
.access = PL1_R, .resetvalue = cbar32 },
|
|
{ .name = "CBAR_EL1", .state = ARM_CP_STATE_AA64,
|
|
.type = ARM_CP_CONST,
|
|
.opc0 = 3, .opc1 = 1, .crn = 15, .crm = 3, .opc2 = 0,
|
|
.access = PL1_R, .resetvalue = cpu->reset_cbar },
|
|
REGINFO_SENTINEL
|
|
};
|
|
/* We don't implement a r/w 64 bit CBAR currently */
|
|
assert(arm_feature(env, ARM_FEATURE_CBAR_RO));
|
|
define_arm_cp_regs(cpu, cbar_reginfo);
|
|
} else {
|
|
ARMCPRegInfo cbar = {
|
|
.name = "CBAR",
|
|
.cp = 15, .crn = 15, .crm = 0, .opc1 = 4, .opc2 = 0,
|
|
.access = PL1_R|PL3_W, .resetvalue = cpu->reset_cbar,
|
|
.fieldoffset = offsetof(CPUARMState,
|
|
cp15.c15_config_base_address)
|
|
};
|
|
if (arm_feature(env, ARM_FEATURE_CBAR_RO)) {
|
|
cbar.access = PL1_R;
|
|
cbar.fieldoffset = 0;
|
|
cbar.type = ARM_CP_CONST;
|
|
}
|
|
define_one_arm_cp_reg(cpu, &cbar);
|
|
}
|
|
}
|
|
|
|
if (arm_feature(env, ARM_FEATURE_VBAR)) {
|
|
ARMCPRegInfo vbar_cp_reginfo[] = {
|
|
{ .name = "VBAR", .state = ARM_CP_STATE_BOTH,
|
|
.opc0 = 3, .crn = 12, .crm = 0, .opc1 = 0, .opc2 = 0,
|
|
.access = PL1_RW, .writefn = vbar_write,
|
|
.bank_fieldoffsets = { offsetof(CPUARMState, cp15.vbar_s),
|
|
offsetof(CPUARMState, cp15.vbar_ns) },
|
|
.resetvalue = 0 },
|
|
REGINFO_SENTINEL
|
|
};
|
|
define_arm_cp_regs(cpu, vbar_cp_reginfo);
|
|
}
|
|
|
|
/* Generic registers whose values depend on the implementation */
|
|
{
|
|
ARMCPRegInfo sctlr = {
|
|
.name = "SCTLR", .state = ARM_CP_STATE_BOTH,
|
|
.opc0 = 3, .opc1 = 0, .crn = 1, .crm = 0, .opc2 = 0,
|
|
.access = PL1_RW,
|
|
.bank_fieldoffsets = { offsetof(CPUARMState, cp15.sctlr_s),
|
|
offsetof(CPUARMState, cp15.sctlr_ns) },
|
|
.writefn = sctlr_write, .resetvalue = cpu->reset_sctlr,
|
|
.raw_writefn = raw_write,
|
|
};
|
|
if (arm_feature(env, ARM_FEATURE_XSCALE)) {
|
|
/* Normally we would always end the TB on an SCTLR write, but Linux
|
|
* arch/arm/mach-pxa/sleep.S expects two instructions following
|
|
* an MMU enable to execute from cache. Imitate this behaviour.
|
|
*/
|
|
sctlr.type |= ARM_CP_SUPPRESS_TB_END;
|
|
}
|
|
define_one_arm_cp_reg(cpu, &sctlr);
|
|
}
|
|
|
|
if (cpu_isar_feature(aa64_lor, cpu)) {
|
|
define_arm_cp_regs(cpu, lor_reginfo);
|
|
}
|
|
if (cpu_isar_feature(aa64_pan, cpu)) {
|
|
define_one_arm_cp_reg(cpu, &pan_reginfo);
|
|
}
|
|
#ifndef CONFIG_USER_ONLY
|
|
if (cpu_isar_feature(aa64_ats1e1, cpu)) {
|
|
define_arm_cp_regs(cpu, ats1e1_reginfo);
|
|
}
|
|
if (cpu_isar_feature(aa32_ats1e1, cpu)) {
|
|
define_arm_cp_regs(cpu, ats1cp_reginfo);
|
|
}
|
|
#endif
|
|
if (cpu_isar_feature(aa64_uao, cpu)) {
|
|
define_one_arm_cp_reg(cpu, &uao_reginfo);
|
|
}
|
|
|
|
if (arm_feature(env, ARM_FEATURE_EL2) && cpu_isar_feature(aa64_vh, cpu)) {
|
|
define_arm_cp_regs(cpu, vhe_reginfo);
|
|
}
|
|
|
|
if (cpu_isar_feature(aa64_sve, cpu)) {
|
|
define_one_arm_cp_reg(cpu, &zcr_el1_reginfo);
|
|
if (arm_feature(env, ARM_FEATURE_EL2)) {
|
|
define_one_arm_cp_reg(cpu, &zcr_el2_reginfo);
|
|
} else {
|
|
define_one_arm_cp_reg(cpu, &zcr_no_el2_reginfo);
|
|
}
|
|
if (arm_feature(env, ARM_FEATURE_EL3)) {
|
|
define_one_arm_cp_reg(cpu, &zcr_el3_reginfo);
|
|
}
|
|
}
|
|
|
|
#ifdef TARGET_AARCH64
|
|
if (cpu_isar_feature(aa64_pauth, cpu)) {
|
|
define_arm_cp_regs(cpu, pauth_reginfo);
|
|
}
|
|
if (cpu_isar_feature(aa64_rndr, cpu)) {
|
|
define_arm_cp_regs(cpu, rndr_reginfo);
|
|
}
|
|
#ifndef CONFIG_USER_ONLY
|
|
/* Data Cache clean instructions up to PoP */
|
|
if (cpu_isar_feature(aa64_dcpop, cpu)) {
|
|
define_one_arm_cp_reg(cpu, dcpop_reg);
|
|
|
|
if (cpu_isar_feature(aa64_dcpodp, cpu)) {
|
|
define_one_arm_cp_reg(cpu, dcpodp_reg);
|
|
}
|
|
}
|
|
#endif /*CONFIG_USER_ONLY*/
|
|
#endif
|
|
|
|
if (cpu_isar_feature(any_predinv, cpu)) {
|
|
define_arm_cp_regs(cpu, predinv_reginfo);
|
|
}
|
|
|
|
#ifndef CONFIG_USER_ONLY
|
|
/*
|
|
* Register redirections and aliases must be done last,
|
|
* after the registers from the other extensions have been defined.
|
|
*/
|
|
if (arm_feature(env, ARM_FEATURE_EL2) && cpu_isar_feature(aa64_vh, cpu)) {
|
|
define_arm_vh_e2h_redirects_aliases(cpu);
|
|
}
|
|
#endif
|
|
}
|
|
|
|
void arm_cpu_register_gdb_regs_for_features(ARMCPU *cpu)
|
|
{
|
|
CPUState *cs = CPU(cpu);
|
|
CPUARMState *env = &cpu->env;
|
|
|
|
if (arm_feature(env, ARM_FEATURE_AARCH64)) {
|
|
gdb_register_coprocessor(cs, aarch64_fpu_gdb_get_reg,
|
|
aarch64_fpu_gdb_set_reg,
|
|
34, "aarch64-fpu.xml", 0);
|
|
} else if (arm_feature(env, ARM_FEATURE_NEON)) {
|
|
gdb_register_coprocessor(cs, vfp_gdb_get_reg, vfp_gdb_set_reg,
|
|
51, "arm-neon.xml", 0);
|
|
} else if (arm_feature(env, ARM_FEATURE_VFP3)) {
|
|
gdb_register_coprocessor(cs, vfp_gdb_get_reg, vfp_gdb_set_reg,
|
|
35, "arm-vfp3.xml", 0);
|
|
} else if (arm_feature(env, ARM_FEATURE_VFP)) {
|
|
gdb_register_coprocessor(cs, vfp_gdb_get_reg, vfp_gdb_set_reg,
|
|
19, "arm-vfp.xml", 0);
|
|
}
|
|
gdb_register_coprocessor(cs, arm_gdb_get_sysreg, arm_gdb_set_sysreg,
|
|
arm_gen_dynamic_xml(cs),
|
|
"system-registers.xml", 0);
|
|
}
|
|
|
|
/* Sort alphabetically by type name, except for "any". */
|
|
static gint arm_cpu_list_compare(gconstpointer a, gconstpointer b)
|
|
{
|
|
ObjectClass *class_a = (ObjectClass *)a;
|
|
ObjectClass *class_b = (ObjectClass *)b;
|
|
const char *name_a, *name_b;
|
|
|
|
name_a = object_class_get_name(class_a);
|
|
name_b = object_class_get_name(class_b);
|
|
if (strcmp(name_a, "any-" TYPE_ARM_CPU) == 0) {
|
|
return 1;
|
|
} else if (strcmp(name_b, "any-" TYPE_ARM_CPU) == 0) {
|
|
return -1;
|
|
} else {
|
|
return strcmp(name_a, name_b);
|
|
}
|
|
}
|
|
|
|
static void arm_cpu_list_entry(gpointer data, gpointer user_data)
|
|
{
|
|
ObjectClass *oc = data;
|
|
const char *typename;
|
|
char *name;
|
|
|
|
typename = object_class_get_name(oc);
|
|
name = g_strndup(typename, strlen(typename) - strlen("-" TYPE_ARM_CPU));
|
|
qemu_printf(" %s\n", name);
|
|
g_free(name);
|
|
}
|
|
|
|
void arm_cpu_list(void)
|
|
{
|
|
GSList *list;
|
|
|
|
list = object_class_get_list(TYPE_ARM_CPU, false);
|
|
list = g_slist_sort(list, arm_cpu_list_compare);
|
|
qemu_printf("Available CPUs:\n");
|
|
g_slist_foreach(list, arm_cpu_list_entry, NULL);
|
|
g_slist_free(list);
|
|
}
|
|
|
|
static void arm_cpu_add_definition(gpointer data, gpointer user_data)
|
|
{
|
|
ObjectClass *oc = data;
|
|
CpuDefinitionInfoList **cpu_list = user_data;
|
|
CpuDefinitionInfoList *entry;
|
|
CpuDefinitionInfo *info;
|
|
const char *typename;
|
|
|
|
typename = object_class_get_name(oc);
|
|
info = g_malloc0(sizeof(*info));
|
|
info->name = g_strndup(typename,
|
|
strlen(typename) - strlen("-" TYPE_ARM_CPU));
|
|
info->q_typename = g_strdup(typename);
|
|
|
|
entry = g_malloc0(sizeof(*entry));
|
|
entry->value = info;
|
|
entry->next = *cpu_list;
|
|
*cpu_list = entry;
|
|
}
|
|
|
|
CpuDefinitionInfoList *qmp_query_cpu_definitions(Error **errp)
|
|
{
|
|
CpuDefinitionInfoList *cpu_list = NULL;
|
|
GSList *list;
|
|
|
|
list = object_class_get_list(TYPE_ARM_CPU, false);
|
|
g_slist_foreach(list, arm_cpu_add_definition, &cpu_list);
|
|
g_slist_free(list);
|
|
|
|
return cpu_list;
|
|
}
|
|
|
|
static void add_cpreg_to_hashtable(ARMCPU *cpu, const ARMCPRegInfo *r,
|
|
void *opaque, int state, int secstate,
|
|
int crm, int opc1, int opc2,
|
|
const char *name)
|
|
{
|
|
/* Private utility function for define_one_arm_cp_reg_with_opaque():
|
|
* add a single reginfo struct to the hash table.
|
|
*/
|
|
uint32_t *key = g_new(uint32_t, 1);
|
|
ARMCPRegInfo *r2 = g_memdup(r, sizeof(ARMCPRegInfo));
|
|
int is64 = (r->type & ARM_CP_64BIT) ? 1 : 0;
|
|
int ns = (secstate & ARM_CP_SECSTATE_NS) ? 1 : 0;
|
|
|
|
r2->name = g_strdup(name);
|
|
/* Reset the secure state to the specific incoming state. This is
|
|
* necessary as the register may have been defined with both states.
|
|
*/
|
|
r2->secure = secstate;
|
|
|
|
if (r->bank_fieldoffsets[0] && r->bank_fieldoffsets[1]) {
|
|
/* Register is banked (using both entries in array).
|
|
* Overwriting fieldoffset as the array is only used to define
|
|
* banked registers but later only fieldoffset is used.
|
|
*/
|
|
r2->fieldoffset = r->bank_fieldoffsets[ns];
|
|
}
|
|
|
|
if (state == ARM_CP_STATE_AA32) {
|
|
if (r->bank_fieldoffsets[0] && r->bank_fieldoffsets[1]) {
|
|
/* If the register is banked then we don't need to migrate or
|
|
* reset the 32-bit instance in certain cases:
|
|
*
|
|
* 1) If the register has both 32-bit and 64-bit instances then we
|
|
* can count on the 64-bit instance taking care of the
|
|
* non-secure bank.
|
|
* 2) If ARMv8 is enabled then we can count on a 64-bit version
|
|
* taking care of the secure bank. This requires that separate
|
|
* 32 and 64-bit definitions are provided.
|
|
*/
|
|
if ((r->state == ARM_CP_STATE_BOTH && ns) ||
|
|
(arm_feature(&cpu->env, ARM_FEATURE_V8) && !ns)) {
|
|
r2->type |= ARM_CP_ALIAS;
|
|
}
|
|
} else if ((secstate != r->secure) && !ns) {
|
|
/* The register is not banked so we only want to allow migration of
|
|
* the non-secure instance.
|
|
*/
|
|
r2->type |= ARM_CP_ALIAS;
|
|
}
|
|
|
|
if (r->state == ARM_CP_STATE_BOTH) {
|
|
/* We assume it is a cp15 register if the .cp field is left unset.
|
|
*/
|
|
if (r2->cp == 0) {
|
|
r2->cp = 15;
|
|
}
|
|
|
|
#ifdef HOST_WORDS_BIGENDIAN
|
|
if (r2->fieldoffset) {
|
|
r2->fieldoffset += sizeof(uint32_t);
|
|
}
|
|
#endif
|
|
}
|
|
}
|
|
if (state == ARM_CP_STATE_AA64) {
|
|
/* To allow abbreviation of ARMCPRegInfo
|
|
* definitions, we treat cp == 0 as equivalent to
|
|
* the value for "standard guest-visible sysreg".
|
|
* STATE_BOTH definitions are also always "standard
|
|
* sysreg" in their AArch64 view (the .cp value may
|
|
* be non-zero for the benefit of the AArch32 view).
|
|
*/
|
|
if (r->cp == 0 || r->state == ARM_CP_STATE_BOTH) {
|
|
r2->cp = CP_REG_ARM64_SYSREG_CP;
|
|
}
|
|
*key = ENCODE_AA64_CP_REG(r2->cp, r2->crn, crm,
|
|
r2->opc0, opc1, opc2);
|
|
} else {
|
|
*key = ENCODE_CP_REG(r2->cp, is64, ns, r2->crn, crm, opc1, opc2);
|
|
}
|
|
if (opaque) {
|
|
r2->opaque = opaque;
|
|
}
|
|
/* reginfo passed to helpers is correct for the actual access,
|
|
* and is never ARM_CP_STATE_BOTH:
|
|
*/
|
|
r2->state = state;
|
|
/* Make sure reginfo passed to helpers for wildcarded regs
|
|
* has the correct crm/opc1/opc2 for this reg, not CP_ANY:
|
|
*/
|
|
r2->crm = crm;
|
|
r2->opc1 = opc1;
|
|
r2->opc2 = opc2;
|
|
/* By convention, for wildcarded registers only the first
|
|
* entry is used for migration; the others are marked as
|
|
* ALIAS so we don't try to transfer the register
|
|
* multiple times. Special registers (ie NOP/WFI) are
|
|
* never migratable and not even raw-accessible.
|
|
*/
|
|
if ((r->type & ARM_CP_SPECIAL)) {
|
|
r2->type |= ARM_CP_NO_RAW;
|
|
}
|
|
if (((r->crm == CP_ANY) && crm != 0) ||
|
|
((r->opc1 == CP_ANY) && opc1 != 0) ||
|
|
((r->opc2 == CP_ANY) && opc2 != 0)) {
|
|
r2->type |= ARM_CP_ALIAS | ARM_CP_NO_GDB;
|
|
}
|
|
|
|
/* Check that raw accesses are either forbidden or handled. Note that
|
|
* we can't assert this earlier because the setup of fieldoffset for
|
|
* banked registers has to be done first.
|
|
*/
|
|
if (!(r2->type & ARM_CP_NO_RAW)) {
|
|
assert(!raw_accessors_invalid(r2));
|
|
}
|
|
|
|
/* Overriding of an existing definition must be explicitly
|
|
* requested.
|
|
*/
|
|
if (!(r->type & ARM_CP_OVERRIDE)) {
|
|
ARMCPRegInfo *oldreg;
|
|
oldreg = g_hash_table_lookup(cpu->cp_regs, key);
|
|
if (oldreg && !(oldreg->type & ARM_CP_OVERRIDE)) {
|
|
fprintf(stderr, "Register redefined: cp=%d %d bit "
|
|
"crn=%d crm=%d opc1=%d opc2=%d, "
|
|
"was %s, now %s\n", r2->cp, 32 + 32 * is64,
|
|
r2->crn, r2->crm, r2->opc1, r2->opc2,
|
|
oldreg->name, r2->name);
|
|
g_assert_not_reached();
|
|
}
|
|
}
|
|
g_hash_table_insert(cpu->cp_regs, key, r2);
|
|
}
|
|
|
|
|
|
void define_one_arm_cp_reg_with_opaque(ARMCPU *cpu,
|
|
const ARMCPRegInfo *r, void *opaque)
|
|
{
|
|
/* Define implementations of coprocessor registers.
|
|
* We store these in a hashtable because typically
|
|
* there are less than 150 registers in a space which
|
|
* is 16*16*16*8*8 = 262144 in size.
|
|
* Wildcarding is supported for the crm, opc1 and opc2 fields.
|
|
* If a register is defined twice then the second definition is
|
|
* used, so this can be used to define some generic registers and
|
|
* then override them with implementation specific variations.
|
|
* At least one of the original and the second definition should
|
|
* include ARM_CP_OVERRIDE in its type bits -- this is just a guard
|
|
* against accidental use.
|
|
*
|
|
* The state field defines whether the register is to be
|
|
* visible in the AArch32 or AArch64 execution state. If the
|
|
* state is set to ARM_CP_STATE_BOTH then we synthesise a
|
|
* reginfo structure for the AArch32 view, which sees the lower
|
|
* 32 bits of the 64 bit register.
|
|
*
|
|
* Only registers visible in AArch64 may set r->opc0; opc0 cannot
|
|
* be wildcarded. AArch64 registers are always considered to be 64
|
|
* bits; the ARM_CP_64BIT* flag applies only to the AArch32 view of
|
|
* the register, if any.
|
|
*/
|
|
int crm, opc1, opc2, state;
|
|
int crmmin = (r->crm == CP_ANY) ? 0 : r->crm;
|
|
int crmmax = (r->crm == CP_ANY) ? 15 : r->crm;
|
|
int opc1min = (r->opc1 == CP_ANY) ? 0 : r->opc1;
|
|
int opc1max = (r->opc1 == CP_ANY) ? 7 : r->opc1;
|
|
int opc2min = (r->opc2 == CP_ANY) ? 0 : r->opc2;
|
|
int opc2max = (r->opc2 == CP_ANY) ? 7 : r->opc2;
|
|
/* 64 bit registers have only CRm and Opc1 fields */
|
|
assert(!((r->type & ARM_CP_64BIT) && (r->opc2 || r->crn)));
|
|
/* op0 only exists in the AArch64 encodings */
|
|
assert((r->state != ARM_CP_STATE_AA32) || (r->opc0 == 0));
|
|
/* AArch64 regs are all 64 bit so ARM_CP_64BIT is meaningless */
|
|
assert((r->state != ARM_CP_STATE_AA64) || !(r->type & ARM_CP_64BIT));
|
|
/* The AArch64 pseudocode CheckSystemAccess() specifies that op1
|
|
* encodes a minimum access level for the register. We roll this
|
|
* runtime check into our general permission check code, so check
|
|
* here that the reginfo's specified permissions are strict enough
|
|
* to encompass the generic architectural permission check.
|
|
*/
|
|
if (r->state != ARM_CP_STATE_AA32) {
|
|
int mask = 0;
|
|
switch (r->opc1) {
|
|
case 0:
|
|
/* min_EL EL1, but some accessible to EL0 via kernel ABI */
|
|
mask = PL0U_R | PL1_RW;
|
|
break;
|
|
case 1: case 2:
|
|
/* min_EL EL1 */
|
|
mask = PL1_RW;
|
|
break;
|
|
case 3:
|
|
/* min_EL EL0 */
|
|
mask = PL0_RW;
|
|
break;
|
|
case 4:
|
|
case 5:
|
|
/* min_EL EL2 */
|
|
mask = PL2_RW;
|
|
break;
|
|
case 6:
|
|
/* min_EL EL3 */
|
|
mask = PL3_RW;
|
|
break;
|
|
case 7:
|
|
/* min_EL EL1, secure mode only (we don't check the latter) */
|
|
mask = PL1_RW;
|
|
break;
|
|
default:
|
|
/* broken reginfo with out-of-range opc1 */
|
|
assert(false);
|
|
break;
|
|
}
|
|
/* assert our permissions are not too lax (stricter is fine) */
|
|
assert((r->access & ~mask) == 0);
|
|
}
|
|
|
|
/* Check that the register definition has enough info to handle
|
|
* reads and writes if they are permitted.
|
|
*/
|
|
if (!(r->type & (ARM_CP_SPECIAL|ARM_CP_CONST))) {
|
|
if (r->access & PL3_R) {
|
|
assert((r->fieldoffset ||
|
|
(r->bank_fieldoffsets[0] && r->bank_fieldoffsets[1])) ||
|
|
r->readfn);
|
|
}
|
|
if (r->access & PL3_W) {
|
|
assert((r->fieldoffset ||
|
|
(r->bank_fieldoffsets[0] && r->bank_fieldoffsets[1])) ||
|
|
r->writefn);
|
|
}
|
|
}
|
|
/* Bad type field probably means missing sentinel at end of reg list */
|
|
assert(cptype_valid(r->type));
|
|
for (crm = crmmin; crm <= crmmax; crm++) {
|
|
for (opc1 = opc1min; opc1 <= opc1max; opc1++) {
|
|
for (opc2 = opc2min; opc2 <= opc2max; opc2++) {
|
|
for (state = ARM_CP_STATE_AA32;
|
|
state <= ARM_CP_STATE_AA64; state++) {
|
|
if (r->state != state && r->state != ARM_CP_STATE_BOTH) {
|
|
continue;
|
|
}
|
|
if (state == ARM_CP_STATE_AA32) {
|
|
/* Under AArch32 CP registers can be common
|
|
* (same for secure and non-secure world) or banked.
|
|
*/
|
|
char *name;
|
|
|
|
switch (r->secure) {
|
|
case ARM_CP_SECSTATE_S:
|
|
case ARM_CP_SECSTATE_NS:
|
|
add_cpreg_to_hashtable(cpu, r, opaque, state,
|
|
r->secure, crm, opc1, opc2,
|
|
r->name);
|
|
break;
|
|
default:
|
|
name = g_strdup_printf("%s_S", r->name);
|
|
add_cpreg_to_hashtable(cpu, r, opaque, state,
|
|
ARM_CP_SECSTATE_S,
|
|
crm, opc1, opc2, name);
|
|
g_free(name);
|
|
add_cpreg_to_hashtable(cpu, r, opaque, state,
|
|
ARM_CP_SECSTATE_NS,
|
|
crm, opc1, opc2, r->name);
|
|
break;
|
|
}
|
|
} else {
|
|
/* AArch64 registers get mapped to non-secure instance
|
|
* of AArch32 */
|
|
add_cpreg_to_hashtable(cpu, r, opaque, state,
|
|
ARM_CP_SECSTATE_NS,
|
|
crm, opc1, opc2, r->name);
|
|
}
|
|
}
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
void define_arm_cp_regs_with_opaque(ARMCPU *cpu,
|
|
const ARMCPRegInfo *regs, void *opaque)
|
|
{
|
|
/* Define a whole list of registers */
|
|
const ARMCPRegInfo *r;
|
|
for (r = regs; r->type != ARM_CP_SENTINEL; r++) {
|
|
define_one_arm_cp_reg_with_opaque(cpu, r, opaque);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Modify ARMCPRegInfo for access from userspace.
|
|
*
|
|
* This is a data driven modification directed by
|
|
* ARMCPRegUserSpaceInfo. All registers become ARM_CP_CONST as
|
|
* user-space cannot alter any values and dynamic values pertaining to
|
|
* execution state are hidden from user space view anyway.
|
|
*/
|
|
void modify_arm_cp_regs(ARMCPRegInfo *regs, const ARMCPRegUserSpaceInfo *mods)
|
|
{
|
|
const ARMCPRegUserSpaceInfo *m;
|
|
ARMCPRegInfo *r;
|
|
|
|
for (m = mods; m->name; m++) {
|
|
GPatternSpec *pat = NULL;
|
|
if (m->is_glob) {
|
|
pat = g_pattern_spec_new(m->name);
|
|
}
|
|
for (r = regs; r->type != ARM_CP_SENTINEL; r++) {
|
|
if (pat && g_pattern_match_string(pat, r->name)) {
|
|
r->type = ARM_CP_CONST;
|
|
r->access = PL0U_R;
|
|
r->resetvalue = 0;
|
|
/* continue */
|
|
} else if (strcmp(r->name, m->name) == 0) {
|
|
r->type = ARM_CP_CONST;
|
|
r->access = PL0U_R;
|
|
r->resetvalue &= m->exported_bits;
|
|
r->resetvalue |= m->fixed_bits;
|
|
break;
|
|
}
|
|
}
|
|
if (pat) {
|
|
g_pattern_spec_free(pat);
|
|
}
|
|
}
|
|
}
|
|
|
|
const ARMCPRegInfo *get_arm_cp_reginfo(GHashTable *cpregs, uint32_t encoded_cp)
|
|
{
|
|
return g_hash_table_lookup(cpregs, &encoded_cp);
|
|
}
|
|
|
|
void arm_cp_write_ignore(CPUARMState *env, const ARMCPRegInfo *ri,
|
|
uint64_t value)
|
|
{
|
|
/* Helper coprocessor write function for write-ignore registers */
|
|
}
|
|
|
|
uint64_t arm_cp_read_zero(CPUARMState *env, const ARMCPRegInfo *ri)
|
|
{
|
|
/* Helper coprocessor write function for read-as-zero registers */
|
|
return 0;
|
|
}
|
|
|
|
void arm_cp_reset_ignore(CPUARMState *env, const ARMCPRegInfo *opaque)
|
|
{
|
|
/* Helper coprocessor reset function for do-nothing-on-reset registers */
|
|
}
|
|
|
|
static int bad_mode_switch(CPUARMState *env, int mode, CPSRWriteType write_type)
|
|
{
|
|
/* Return true if it is not valid for us to switch to
|
|
* this CPU mode (ie all the UNPREDICTABLE cases in
|
|
* the ARM ARM CPSRWriteByInstr pseudocode).
|
|
*/
|
|
|
|
/* Changes to or from Hyp via MSR and CPS are illegal. */
|
|
if (write_type == CPSRWriteByInstr &&
|
|
((env->uncached_cpsr & CPSR_M) == ARM_CPU_MODE_HYP ||
|
|
mode == ARM_CPU_MODE_HYP)) {
|
|
return 1;
|
|
}
|
|
|
|
switch (mode) {
|
|
case ARM_CPU_MODE_USR:
|
|
return 0;
|
|
case ARM_CPU_MODE_SYS:
|
|
case ARM_CPU_MODE_SVC:
|
|
case ARM_CPU_MODE_ABT:
|
|
case ARM_CPU_MODE_UND:
|
|
case ARM_CPU_MODE_IRQ:
|
|
case ARM_CPU_MODE_FIQ:
|
|
/* Note that we don't implement the IMPDEF NSACR.RFR which in v7
|
|
* allows FIQ mode to be Secure-only. (In v8 this doesn't exist.)
|
|
*/
|
|
/* If HCR.TGE is set then changes from Monitor to NS PL1 via MSR
|
|
* and CPS are treated as illegal mode changes.
|
|
*/
|
|
if (write_type == CPSRWriteByInstr &&
|
|
(env->uncached_cpsr & CPSR_M) == ARM_CPU_MODE_MON &&
|
|
(arm_hcr_el2_eff(env) & HCR_TGE)) {
|
|
return 1;
|
|
}
|
|
return 0;
|
|
case ARM_CPU_MODE_HYP:
|
|
return !arm_feature(env, ARM_FEATURE_EL2)
|
|
|| arm_current_el(env) < 2 || arm_is_secure_below_el3(env);
|
|
case ARM_CPU_MODE_MON:
|
|
return arm_current_el(env) < 3;
|
|
default:
|
|
return 1;
|
|
}
|
|
}
|
|
|
|
uint32_t cpsr_read(CPUARMState *env)
|
|
{
|
|
int ZF;
|
|
ZF = (env->ZF == 0);
|
|
return env->uncached_cpsr | (env->NF & 0x80000000) | (ZF << 30) |
|
|
(env->CF << 29) | ((env->VF & 0x80000000) >> 3) | (env->QF << 27)
|
|
| (env->thumb << 5) | ((env->condexec_bits & 3) << 25)
|
|
| ((env->condexec_bits & 0xfc) << 8)
|
|
| (env->GE << 16) | (env->daif & CPSR_AIF);
|
|
}
|
|
|
|
void cpsr_write(CPUARMState *env, uint32_t val, uint32_t mask,
|
|
CPSRWriteType write_type)
|
|
{
|
|
uint32_t changed_daif;
|
|
|
|
if (mask & CPSR_NZCV) {
|
|
env->ZF = (~val) & CPSR_Z;
|
|
env->NF = val;
|
|
env->CF = (val >> 29) & 1;
|
|
env->VF = (val << 3) & 0x80000000;
|
|
}
|
|
if (mask & CPSR_Q)
|
|
env->QF = ((val & CPSR_Q) != 0);
|
|
if (mask & CPSR_T)
|
|
env->thumb = ((val & CPSR_T) != 0);
|
|
if (mask & CPSR_IT_0_1) {
|
|
env->condexec_bits &= ~3;
|
|
env->condexec_bits |= (val >> 25) & 3;
|
|
}
|
|
if (mask & CPSR_IT_2_7) {
|
|
env->condexec_bits &= 3;
|
|
env->condexec_bits |= (val >> 8) & 0xfc;
|
|
}
|
|
if (mask & CPSR_GE) {
|
|
env->GE = (val >> 16) & 0xf;
|
|
}
|
|
|
|
/* In a V7 implementation that includes the security extensions but does
|
|
* not include Virtualization Extensions the SCR.FW and SCR.AW bits control
|
|
* whether non-secure software is allowed to change the CPSR_F and CPSR_A
|
|
* bits respectively.
|
|
*
|
|
* In a V8 implementation, it is permitted for privileged software to
|
|
* change the CPSR A/F bits regardless of the SCR.AW/FW bits.
|
|
*/
|
|
if (write_type != CPSRWriteRaw && !arm_feature(env, ARM_FEATURE_V8) &&
|
|
arm_feature(env, ARM_FEATURE_EL3) &&
|
|
!arm_feature(env, ARM_FEATURE_EL2) &&
|
|
!arm_is_secure(env)) {
|
|
|
|
changed_daif = (env->daif ^ val) & mask;
|
|
|
|
if (changed_daif & CPSR_A) {
|
|
/* Check to see if we are allowed to change the masking of async
|
|
* abort exceptions from a non-secure state.
|
|
*/
|
|
if (!(env->cp15.scr_el3 & SCR_AW)) {
|
|
qemu_log_mask(LOG_GUEST_ERROR,
|
|
"Ignoring attempt to switch CPSR_A flag from "
|
|
"non-secure world with SCR.AW bit clear\n");
|
|
mask &= ~CPSR_A;
|
|
}
|
|
}
|
|
|
|
if (changed_daif & CPSR_F) {
|
|
/* Check to see if we are allowed to change the masking of FIQ
|
|
* exceptions from a non-secure state.
|
|
*/
|
|
if (!(env->cp15.scr_el3 & SCR_FW)) {
|
|
qemu_log_mask(LOG_GUEST_ERROR,
|
|
"Ignoring attempt to switch CPSR_F flag from "
|
|
"non-secure world with SCR.FW bit clear\n");
|
|
mask &= ~CPSR_F;
|
|
}
|
|
|
|
/* Check whether non-maskable FIQ (NMFI) support is enabled.
|
|
* If this bit is set software is not allowed to mask
|
|
* FIQs, but is allowed to set CPSR_F to 0.
|
|
*/
|
|
if ((A32_BANKED_CURRENT_REG_GET(env, sctlr) & SCTLR_NMFI) &&
|
|
(val & CPSR_F)) {
|
|
qemu_log_mask(LOG_GUEST_ERROR,
|
|
"Ignoring attempt to enable CPSR_F flag "
|
|
"(non-maskable FIQ [NMFI] support enabled)\n");
|
|
mask &= ~CPSR_F;
|
|
}
|
|
}
|
|
}
|
|
|
|
env->daif &= ~(CPSR_AIF & mask);
|
|
env->daif |= val & CPSR_AIF & mask;
|
|
|
|
if (write_type != CPSRWriteRaw &&
|
|
((env->uncached_cpsr ^ val) & mask & CPSR_M)) {
|
|
if ((env->uncached_cpsr & CPSR_M) == ARM_CPU_MODE_USR) {
|
|
/* Note that we can only get here in USR mode if this is a
|
|
* gdb stub write; for this case we follow the architectural
|
|
* behaviour for guest writes in USR mode of ignoring an attempt
|
|
* to switch mode. (Those are caught by translate.c for writes
|
|
* triggered by guest instructions.)
|
|
*/
|
|
mask &= ~CPSR_M;
|
|
} else if (bad_mode_switch(env, val & CPSR_M, write_type)) {
|
|
/* Attempt to switch to an invalid mode: this is UNPREDICTABLE in
|
|
* v7, and has defined behaviour in v8:
|
|
* + leave CPSR.M untouched
|
|
* + allow changes to the other CPSR fields
|
|
* + set PSTATE.IL
|
|
* For user changes via the GDB stub, we don't set PSTATE.IL,
|
|
* as this would be unnecessarily harsh for a user error.
|
|
*/
|
|
mask &= ~CPSR_M;
|
|
if (write_type != CPSRWriteByGDBStub &&
|
|
arm_feature(env, ARM_FEATURE_V8)) {
|
|
mask |= CPSR_IL;
|
|
val |= CPSR_IL;
|
|
}
|
|
qemu_log_mask(LOG_GUEST_ERROR,
|
|
"Illegal AArch32 mode switch attempt from %s to %s\n",
|
|
aarch32_mode_name(env->uncached_cpsr),
|
|
aarch32_mode_name(val));
|
|
} else {
|
|
qemu_log_mask(CPU_LOG_INT, "%s %s to %s PC 0x%" PRIx32 "\n",
|
|
write_type == CPSRWriteExceptionReturn ?
|
|
"Exception return from AArch32" :
|
|
"AArch32 mode switch from",
|
|
aarch32_mode_name(env->uncached_cpsr),
|
|
aarch32_mode_name(val), env->regs[15]);
|
|
switch_mode(env, val & CPSR_M);
|
|
}
|
|
}
|
|
mask &= ~CACHED_CPSR_BITS;
|
|
env->uncached_cpsr = (env->uncached_cpsr & ~mask) | (val & mask);
|
|
}
|
|
|
|
/* Sign/zero extend */
|
|
uint32_t HELPER(sxtb16)(uint32_t x)
|
|
{
|
|
uint32_t res;
|
|
res = (uint16_t)(int8_t)x;
|
|
res |= (uint32_t)(int8_t)(x >> 16) << 16;
|
|
return res;
|
|
}
|
|
|
|
uint32_t HELPER(uxtb16)(uint32_t x)
|
|
{
|
|
uint32_t res;
|
|
res = (uint16_t)(uint8_t)x;
|
|
res |= (uint32_t)(uint8_t)(x >> 16) << 16;
|
|
return res;
|
|
}
|
|
|
|
int32_t HELPER(sdiv)(int32_t num, int32_t den)
|
|
{
|
|
if (den == 0)
|
|
return 0;
|
|
if (num == INT_MIN && den == -1)
|
|
return INT_MIN;
|
|
return num / den;
|
|
}
|
|
|
|
uint32_t HELPER(udiv)(uint32_t num, uint32_t den)
|
|
{
|
|
if (den == 0)
|
|
return 0;
|
|
return num / den;
|
|
}
|
|
|
|
uint32_t HELPER(rbit)(uint32_t x)
|
|
{
|
|
return revbit32(x);
|
|
}
|
|
|
|
#ifdef CONFIG_USER_ONLY
|
|
|
|
static void switch_mode(CPUARMState *env, int mode)
|
|
{
|
|
ARMCPU *cpu = env_archcpu(env);
|
|
|
|
if (mode != ARM_CPU_MODE_USR) {
|
|
cpu_abort(CPU(cpu), "Tried to switch out of user mode\n");
|
|
}
|
|
}
|
|
|
|
uint32_t arm_phys_excp_target_el(CPUState *cs, uint32_t excp_idx,
|
|
uint32_t cur_el, bool secure)
|
|
{
|
|
return 1;
|
|
}
|
|
|
|
void aarch64_sync_64_to_32(CPUARMState *env)
|
|
{
|
|
g_assert_not_reached();
|
|
}
|
|
|
|
#else
|
|
|
|
static void switch_mode(CPUARMState *env, int mode)
|
|
{
|
|
int old_mode;
|
|
int i;
|
|
|
|
old_mode = env->uncached_cpsr & CPSR_M;
|
|
if (mode == old_mode)
|
|
return;
|
|
|
|
if (old_mode == ARM_CPU_MODE_FIQ) {
|
|
memcpy (env->fiq_regs, env->regs + 8, 5 * sizeof(uint32_t));
|
|
memcpy (env->regs + 8, env->usr_regs, 5 * sizeof(uint32_t));
|
|
} else if (mode == ARM_CPU_MODE_FIQ) {
|
|
memcpy (env->usr_regs, env->regs + 8, 5 * sizeof(uint32_t));
|
|
memcpy (env->regs + 8, env->fiq_regs, 5 * sizeof(uint32_t));
|
|
}
|
|
|
|
i = bank_number(old_mode);
|
|
env->banked_r13[i] = env->regs[13];
|
|
env->banked_spsr[i] = env->spsr;
|
|
|
|
i = bank_number(mode);
|
|
env->regs[13] = env->banked_r13[i];
|
|
env->spsr = env->banked_spsr[i];
|
|
|
|
env->banked_r14[r14_bank_number(old_mode)] = env->regs[14];
|
|
env->regs[14] = env->banked_r14[r14_bank_number(mode)];
|
|
}
|
|
|
|
/* Physical Interrupt Target EL Lookup Table
|
|
*
|
|
* [ From ARM ARM section G1.13.4 (Table G1-15) ]
|
|
*
|
|
* The below multi-dimensional table is used for looking up the target
|
|
* exception level given numerous condition criteria. Specifically, the
|
|
* target EL is based on SCR and HCR routing controls as well as the
|
|
* currently executing EL and secure state.
|
|
*
|
|
* Dimensions:
|
|
* target_el_table[2][2][2][2][2][4]
|
|
* | | | | | +--- Current EL
|
|
* | | | | +------ Non-secure(0)/Secure(1)
|
|
* | | | +--------- HCR mask override
|
|
* | | +------------ SCR exec state control
|
|
* | +--------------- SCR mask override
|
|
* +------------------ 32-bit(0)/64-bit(1) EL3
|
|
*
|
|
* The table values are as such:
|
|
* 0-3 = EL0-EL3
|
|
* -1 = Cannot occur
|
|
*
|
|
* The ARM ARM target EL table includes entries indicating that an "exception
|
|
* is not taken". The two cases where this is applicable are:
|
|
* 1) An exception is taken from EL3 but the SCR does not have the exception
|
|
* routed to EL3.
|
|
* 2) An exception is taken from EL2 but the HCR does not have the exception
|
|
* routed to EL2.
|
|
* In these two cases, the below table contain a target of EL1. This value is
|
|
* returned as it is expected that the consumer of the table data will check
|
|
* for "target EL >= current EL" to ensure the exception is not taken.
|
|
*
|
|
* SCR HCR
|
|
* 64 EA AMO From
|
|
* BIT IRQ IMO Non-secure Secure
|
|
* EL3 FIQ RW FMO EL0 EL1 EL2 EL3 EL0 EL1 EL2 EL3
|
|
*/
|
|
static const int8_t target_el_table[2][2][2][2][2][4] = {
|
|
{{{{/* 0 0 0 0 */{ 1, 1, 2, -1 },{ 3, -1, -1, 3 },},
|
|
{/* 0 0 0 1 */{ 2, 2, 2, -1 },{ 3, -1, -1, 3 },},},
|
|
{{/* 0 0 1 0 */{ 1, 1, 2, -1 },{ 3, -1, -1, 3 },},
|
|
{/* 0 0 1 1 */{ 2, 2, 2, -1 },{ 3, -1, -1, 3 },},},},
|
|
{{{/* 0 1 0 0 */{ 3, 3, 3, -1 },{ 3, -1, -1, 3 },},
|
|
{/* 0 1 0 1 */{ 3, 3, 3, -1 },{ 3, -1, -1, 3 },},},
|
|
{{/* 0 1 1 0 */{ 3, 3, 3, -1 },{ 3, -1, -1, 3 },},
|
|
{/* 0 1 1 1 */{ 3, 3, 3, -1 },{ 3, -1, -1, 3 },},},},},
|
|
{{{{/* 1 0 0 0 */{ 1, 1, 2, -1 },{ 1, 1, -1, 1 },},
|
|
{/* 1 0 0 1 */{ 2, 2, 2, -1 },{ 1, 1, -1, 1 },},},
|
|
{{/* 1 0 1 0 */{ 1, 1, 1, -1 },{ 1, 1, -1, 1 },},
|
|
{/* 1 0 1 1 */{ 2, 2, 2, -1 },{ 1, 1, -1, 1 },},},},
|
|
{{{/* 1 1 0 0 */{ 3, 3, 3, -1 },{ 3, 3, -1, 3 },},
|
|
{/* 1 1 0 1 */{ 3, 3, 3, -1 },{ 3, 3, -1, 3 },},},
|
|
{{/* 1 1 1 0 */{ 3, 3, 3, -1 },{ 3, 3, -1, 3 },},
|
|
{/* 1 1 1 1 */{ 3, 3, 3, -1 },{ 3, 3, -1, 3 },},},},},
|
|
};
|
|
|
|
/*
|
|
* Determine the target EL for physical exceptions
|
|
*/
|
|
uint32_t arm_phys_excp_target_el(CPUState *cs, uint32_t excp_idx,
|
|
uint32_t cur_el, bool secure)
|
|
{
|
|
CPUARMState *env = cs->env_ptr;
|
|
bool rw;
|
|
bool scr;
|
|
bool hcr;
|
|
int target_el;
|
|
/* Is the highest EL AArch64? */
|
|
bool is64 = arm_feature(env, ARM_FEATURE_AARCH64);
|
|
uint64_t hcr_el2;
|
|
|
|
if (arm_feature(env, ARM_FEATURE_EL3)) {
|
|
rw = ((env->cp15.scr_el3 & SCR_RW) == SCR_RW);
|
|
} else {
|
|
/* Either EL2 is the highest EL (and so the EL2 register width
|
|
* is given by is64); or there is no EL2 or EL3, in which case
|
|
* the value of 'rw' does not affect the table lookup anyway.
|
|
*/
|
|
rw = is64;
|
|
}
|
|
|
|
hcr_el2 = arm_hcr_el2_eff(env);
|
|
switch (excp_idx) {
|
|
case EXCP_IRQ:
|
|
scr = ((env->cp15.scr_el3 & SCR_IRQ) == SCR_IRQ);
|
|
hcr = hcr_el2 & HCR_IMO;
|
|
break;
|
|
case EXCP_FIQ:
|
|
scr = ((env->cp15.scr_el3 & SCR_FIQ) == SCR_FIQ);
|
|
hcr = hcr_el2 & HCR_FMO;
|
|
break;
|
|
default:
|
|
scr = ((env->cp15.scr_el3 & SCR_EA) == SCR_EA);
|
|
hcr = hcr_el2 & HCR_AMO;
|
|
break;
|
|
};
|
|
|
|
/*
|
|
* For these purposes, TGE and AMO/IMO/FMO both force the
|
|
* interrupt to EL2. Fold TGE into the bit extracted above.
|
|
*/
|
|
hcr |= (hcr_el2 & HCR_TGE) != 0;
|
|
|
|
/* Perform a table-lookup for the target EL given the current state */
|
|
target_el = target_el_table[is64][scr][rw][hcr][secure][cur_el];
|
|
|
|
assert(target_el > 0);
|
|
|
|
return target_el;
|
|
}
|
|
|
|
void arm_log_exception(int idx)
|
|
{
|
|
if (qemu_loglevel_mask(CPU_LOG_INT)) {
|
|
const char *exc = NULL;
|
|
static const char * const excnames[] = {
|
|
[EXCP_UDEF] = "Undefined Instruction",
|
|
[EXCP_SWI] = "SVC",
|
|
[EXCP_PREFETCH_ABORT] = "Prefetch Abort",
|
|
[EXCP_DATA_ABORT] = "Data Abort",
|
|
[EXCP_IRQ] = "IRQ",
|
|
[EXCP_FIQ] = "FIQ",
|
|
[EXCP_BKPT] = "Breakpoint",
|
|
[EXCP_EXCEPTION_EXIT] = "QEMU v7M exception exit",
|
|
[EXCP_KERNEL_TRAP] = "QEMU intercept of kernel commpage",
|
|
[EXCP_HVC] = "Hypervisor Call",
|
|
[EXCP_HYP_TRAP] = "Hypervisor Trap",
|
|
[EXCP_SMC] = "Secure Monitor Call",
|
|
[EXCP_VIRQ] = "Virtual IRQ",
|
|
[EXCP_VFIQ] = "Virtual FIQ",
|
|
[EXCP_SEMIHOST] = "Semihosting call",
|
|
[EXCP_NOCP] = "v7M NOCP UsageFault",
|
|
[EXCP_INVSTATE] = "v7M INVSTATE UsageFault",
|
|
[EXCP_STKOF] = "v8M STKOF UsageFault",
|
|
[EXCP_LAZYFP] = "v7M exception during lazy FP stacking",
|
|
[EXCP_LSERR] = "v8M LSERR UsageFault",
|
|
[EXCP_UNALIGNED] = "v7M UNALIGNED UsageFault",
|
|
};
|
|
|
|
if (idx >= 0 && idx < ARRAY_SIZE(excnames)) {
|
|
exc = excnames[idx];
|
|
}
|
|
if (!exc) {
|
|
exc = "unknown";
|
|
}
|
|
qemu_log_mask(CPU_LOG_INT, "Taking exception %d [%s]\n", idx, exc);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Function used to synchronize QEMU's AArch64 register set with AArch32
|
|
* register set. This is necessary when switching between AArch32 and AArch64
|
|
* execution state.
|
|
*/
|
|
void aarch64_sync_32_to_64(CPUARMState *env)
|
|
{
|
|
int i;
|
|
uint32_t mode = env->uncached_cpsr & CPSR_M;
|
|
|
|
/* We can blanket copy R[0:7] to X[0:7] */
|
|
for (i = 0; i < 8; i++) {
|
|
env->xregs[i] = env->regs[i];
|
|
}
|
|
|
|
/*
|
|
* Unless we are in FIQ mode, x8-x12 come from the user registers r8-r12.
|
|
* Otherwise, they come from the banked user regs.
|
|
*/
|
|
if (mode == ARM_CPU_MODE_FIQ) {
|
|
for (i = 8; i < 13; i++) {
|
|
env->xregs[i] = env->usr_regs[i - 8];
|
|
}
|
|
} else {
|
|
for (i = 8; i < 13; i++) {
|
|
env->xregs[i] = env->regs[i];
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Registers x13-x23 are the various mode SP and FP registers. Registers
|
|
* r13 and r14 are only copied if we are in that mode, otherwise we copy
|
|
* from the mode banked register.
|
|
*/
|
|
if (mode == ARM_CPU_MODE_USR || mode == ARM_CPU_MODE_SYS) {
|
|
env->xregs[13] = env->regs[13];
|
|
env->xregs[14] = env->regs[14];
|
|
} else {
|
|
env->xregs[13] = env->banked_r13[bank_number(ARM_CPU_MODE_USR)];
|
|
/* HYP is an exception in that it is copied from r14 */
|
|
if (mode == ARM_CPU_MODE_HYP) {
|
|
env->xregs[14] = env->regs[14];
|
|
} else {
|
|
env->xregs[14] = env->banked_r14[r14_bank_number(ARM_CPU_MODE_USR)];
|
|
}
|
|
}
|
|
|
|
if (mode == ARM_CPU_MODE_HYP) {
|
|
env->xregs[15] = env->regs[13];
|
|
} else {
|
|
env->xregs[15] = env->banked_r13[bank_number(ARM_CPU_MODE_HYP)];
|
|
}
|
|
|
|
if (mode == ARM_CPU_MODE_IRQ) {
|
|
env->xregs[16] = env->regs[14];
|
|
env->xregs[17] = env->regs[13];
|
|
} else {
|
|
env->xregs[16] = env->banked_r14[r14_bank_number(ARM_CPU_MODE_IRQ)];
|
|
env->xregs[17] = env->banked_r13[bank_number(ARM_CPU_MODE_IRQ)];
|
|
}
|
|
|
|
if (mode == ARM_CPU_MODE_SVC) {
|
|
env->xregs[18] = env->regs[14];
|
|
env->xregs[19] = env->regs[13];
|
|
} else {
|
|
env->xregs[18] = env->banked_r14[r14_bank_number(ARM_CPU_MODE_SVC)];
|
|
env->xregs[19] = env->banked_r13[bank_number(ARM_CPU_MODE_SVC)];
|
|
}
|
|
|
|
if (mode == ARM_CPU_MODE_ABT) {
|
|
env->xregs[20] = env->regs[14];
|
|
env->xregs[21] = env->regs[13];
|
|
} else {
|
|
env->xregs[20] = env->banked_r14[r14_bank_number(ARM_CPU_MODE_ABT)];
|
|
env->xregs[21] = env->banked_r13[bank_number(ARM_CPU_MODE_ABT)];
|
|
}
|
|
|
|
if (mode == ARM_CPU_MODE_UND) {
|
|
env->xregs[22] = env->regs[14];
|
|
env->xregs[23] = env->regs[13];
|
|
} else {
|
|
env->xregs[22] = env->banked_r14[r14_bank_number(ARM_CPU_MODE_UND)];
|
|
env->xregs[23] = env->banked_r13[bank_number(ARM_CPU_MODE_UND)];
|
|
}
|
|
|
|
/*
|
|
* Registers x24-x30 are mapped to r8-r14 in FIQ mode. If we are in FIQ
|
|
* mode, then we can copy from r8-r14. Otherwise, we copy from the
|
|
* FIQ bank for r8-r14.
|
|
*/
|
|
if (mode == ARM_CPU_MODE_FIQ) {
|
|
for (i = 24; i < 31; i++) {
|
|
env->xregs[i] = env->regs[i - 16]; /* X[24:30] <- R[8:14] */
|
|
}
|
|
} else {
|
|
for (i = 24; i < 29; i++) {
|
|
env->xregs[i] = env->fiq_regs[i - 24];
|
|
}
|
|
env->xregs[29] = env->banked_r13[bank_number(ARM_CPU_MODE_FIQ)];
|
|
env->xregs[30] = env->banked_r14[r14_bank_number(ARM_CPU_MODE_FIQ)];
|
|
}
|
|
|
|
env->pc = env->regs[15];
|
|
}
|
|
|
|
/*
|
|
* Function used to synchronize QEMU's AArch32 register set with AArch64
|
|
* register set. This is necessary when switching between AArch32 and AArch64
|
|
* execution state.
|
|
*/
|
|
void aarch64_sync_64_to_32(CPUARMState *env)
|
|
{
|
|
int i;
|
|
uint32_t mode = env->uncached_cpsr & CPSR_M;
|
|
|
|
/* We can blanket copy X[0:7] to R[0:7] */
|
|
for (i = 0; i < 8; i++) {
|
|
env->regs[i] = env->xregs[i];
|
|
}
|
|
|
|
/*
|
|
* Unless we are in FIQ mode, r8-r12 come from the user registers x8-x12.
|
|
* Otherwise, we copy x8-x12 into the banked user regs.
|
|
*/
|
|
if (mode == ARM_CPU_MODE_FIQ) {
|
|
for (i = 8; i < 13; i++) {
|
|
env->usr_regs[i - 8] = env->xregs[i];
|
|
}
|
|
} else {
|
|
for (i = 8; i < 13; i++) {
|
|
env->regs[i] = env->xregs[i];
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Registers r13 & r14 depend on the current mode.
|
|
* If we are in a given mode, we copy the corresponding x registers to r13
|
|
* and r14. Otherwise, we copy the x register to the banked r13 and r14
|
|
* for the mode.
|
|
*/
|
|
if (mode == ARM_CPU_MODE_USR || mode == ARM_CPU_MODE_SYS) {
|
|
env->regs[13] = env->xregs[13];
|
|
env->regs[14] = env->xregs[14];
|
|
} else {
|
|
env->banked_r13[bank_number(ARM_CPU_MODE_USR)] = env->xregs[13];
|
|
|
|
/*
|
|
* HYP is an exception in that it does not have its own banked r14 but
|
|
* shares the USR r14
|
|
*/
|
|
if (mode == ARM_CPU_MODE_HYP) {
|
|
env->regs[14] = env->xregs[14];
|
|
} else {
|
|
env->banked_r14[r14_bank_number(ARM_CPU_MODE_USR)] = env->xregs[14];
|
|
}
|
|
}
|
|
|
|
if (mode == ARM_CPU_MODE_HYP) {
|
|
env->regs[13] = env->xregs[15];
|
|
} else {
|
|
env->banked_r13[bank_number(ARM_CPU_MODE_HYP)] = env->xregs[15];
|
|
}
|
|
|
|
if (mode == ARM_CPU_MODE_IRQ) {
|
|
env->regs[14] = env->xregs[16];
|
|
env->regs[13] = env->xregs[17];
|
|
} else {
|
|
env->banked_r14[r14_bank_number(ARM_CPU_MODE_IRQ)] = env->xregs[16];
|
|
env->banked_r13[bank_number(ARM_CPU_MODE_IRQ)] = env->xregs[17];
|
|
}
|
|
|
|
if (mode == ARM_CPU_MODE_SVC) {
|
|
env->regs[14] = env->xregs[18];
|
|
env->regs[13] = env->xregs[19];
|
|
} else {
|
|
env->banked_r14[r14_bank_number(ARM_CPU_MODE_SVC)] = env->xregs[18];
|
|
env->banked_r13[bank_number(ARM_CPU_MODE_SVC)] = env->xregs[19];
|
|
}
|
|
|
|
if (mode == ARM_CPU_MODE_ABT) {
|
|
env->regs[14] = env->xregs[20];
|
|
env->regs[13] = env->xregs[21];
|
|
} else {
|
|
env->banked_r14[r14_bank_number(ARM_CPU_MODE_ABT)] = env->xregs[20];
|
|
env->banked_r13[bank_number(ARM_CPU_MODE_ABT)] = env->xregs[21];
|
|
}
|
|
|
|
if (mode == ARM_CPU_MODE_UND) {
|
|
env->regs[14] = env->xregs[22];
|
|
env->regs[13] = env->xregs[23];
|
|
} else {
|
|
env->banked_r14[r14_bank_number(ARM_CPU_MODE_UND)] = env->xregs[22];
|
|
env->banked_r13[bank_number(ARM_CPU_MODE_UND)] = env->xregs[23];
|
|
}
|
|
|
|
/* Registers x24-x30 are mapped to r8-r14 in FIQ mode. If we are in FIQ
|
|
* mode, then we can copy to r8-r14. Otherwise, we copy to the
|
|
* FIQ bank for r8-r14.
|
|
*/
|
|
if (mode == ARM_CPU_MODE_FIQ) {
|
|
for (i = 24; i < 31; i++) {
|
|
env->regs[i - 16] = env->xregs[i]; /* X[24:30] -> R[8:14] */
|
|
}
|
|
} else {
|
|
for (i = 24; i < 29; i++) {
|
|
env->fiq_regs[i - 24] = env->xregs[i];
|
|
}
|
|
env->banked_r13[bank_number(ARM_CPU_MODE_FIQ)] = env->xregs[29];
|
|
env->banked_r14[r14_bank_number(ARM_CPU_MODE_FIQ)] = env->xregs[30];
|
|
}
|
|
|
|
env->regs[15] = env->pc;
|
|
}
|
|
|
|
static void take_aarch32_exception(CPUARMState *env, int new_mode,
|
|
uint32_t mask, uint32_t offset,
|
|
uint32_t newpc)
|
|
{
|
|
int new_el;
|
|
|
|
/* Change the CPU state so as to actually take the exception. */
|
|
switch_mode(env, new_mode);
|
|
new_el = arm_current_el(env);
|
|
|
|
/*
|
|
* For exceptions taken to AArch32 we must clear the SS bit in both
|
|
* PSTATE and in the old-state value we save to SPSR_<mode>, so zero it now.
|
|
*/
|
|
env->uncached_cpsr &= ~PSTATE_SS;
|
|
env->spsr = cpsr_read(env);
|
|
/* Clear IT bits. */
|
|
env->condexec_bits = 0;
|
|
/* Switch to the new mode, and to the correct instruction set. */
|
|
env->uncached_cpsr = (env->uncached_cpsr & ~CPSR_M) | new_mode;
|
|
/* Set new mode endianness */
|
|
env->uncached_cpsr &= ~CPSR_E;
|
|
if (env->cp15.sctlr_el[new_el] & SCTLR_EE) {
|
|
env->uncached_cpsr |= CPSR_E;
|
|
}
|
|
/* J and IL must always be cleared for exception entry */
|
|
env->uncached_cpsr &= ~(CPSR_IL | CPSR_J);
|
|
env->daif |= mask;
|
|
|
|
if (new_mode == ARM_CPU_MODE_HYP) {
|
|
env->thumb = (env->cp15.sctlr_el[2] & SCTLR_TE) != 0;
|
|
env->elr_el[2] = env->regs[15];
|
|
} else {
|
|
/* CPSR.PAN is normally preserved preserved unless... */
|
|
if (cpu_isar_feature(aa32_pan, env_archcpu(env))) {
|
|
switch (new_el) {
|
|
case 3:
|
|
if (!arm_is_secure_below_el3(env)) {
|
|
/* ... the target is EL3, from non-secure state. */
|
|
env->uncached_cpsr &= ~CPSR_PAN;
|
|
break;
|
|
}
|
|
/* ... the target is EL3, from secure state ... */
|
|
/* fall through */
|
|
case 1:
|
|
/* ... the target is EL1 and SCTLR.SPAN is 0. */
|
|
if (!(env->cp15.sctlr_el[new_el] & SCTLR_SPAN)) {
|
|
env->uncached_cpsr |= CPSR_PAN;
|
|
}
|
|
break;
|
|
}
|
|
}
|
|
/*
|
|
* this is a lie, as there was no c1_sys on V4T/V5, but who cares
|
|
* and we should just guard the thumb mode on V4
|
|
*/
|
|
if (arm_feature(env, ARM_FEATURE_V4T)) {
|
|
env->thumb =
|
|
(A32_BANKED_CURRENT_REG_GET(env, sctlr) & SCTLR_TE) != 0;
|
|
}
|
|
env->regs[14] = env->regs[15] + offset;
|
|
}
|
|
env->regs[15] = newpc;
|
|
arm_rebuild_hflags(env);
|
|
}
|
|
|
|
static void arm_cpu_do_interrupt_aarch32_hyp(CPUState *cs)
|
|
{
|
|
/*
|
|
* Handle exception entry to Hyp mode; this is sufficiently
|
|
* different to entry to other AArch32 modes that we handle it
|
|
* separately here.
|
|
*
|
|
* The vector table entry used is always the 0x14 Hyp mode entry point,
|
|
* unless this is an UNDEF/HVC/abort taken from Hyp to Hyp.
|
|
* The offset applied to the preferred return address is always zero
|
|
* (see DDI0487C.a section G1.12.3).
|
|
* PSTATE A/I/F masks are set based only on the SCR.EA/IRQ/FIQ values.
|
|
*/
|
|
uint32_t addr, mask;
|
|
ARMCPU *cpu = ARM_CPU(cs);
|
|
CPUARMState *env = &cpu->env;
|
|
|
|
switch (cs->exception_index) {
|
|
case EXCP_UDEF:
|
|
addr = 0x04;
|
|
break;
|
|
case EXCP_SWI:
|
|
addr = 0x14;
|
|
break;
|
|
case EXCP_BKPT:
|
|
/* Fall through to prefetch abort. */
|
|
case EXCP_PREFETCH_ABORT:
|
|
env->cp15.ifar_s = env->exception.vaddress;
|
|
qemu_log_mask(CPU_LOG_INT, "...with HIFAR 0x%x\n",
|
|
(uint32_t)env->exception.vaddress);
|
|
addr = 0x0c;
|
|
break;
|
|
case EXCP_DATA_ABORT:
|
|
env->cp15.dfar_s = env->exception.vaddress;
|
|
qemu_log_mask(CPU_LOG_INT, "...with HDFAR 0x%x\n",
|
|
(uint32_t)env->exception.vaddress);
|
|
addr = 0x10;
|
|
break;
|
|
case EXCP_IRQ:
|
|
addr = 0x18;
|
|
break;
|
|
case EXCP_FIQ:
|
|
addr = 0x1c;
|
|
break;
|
|
case EXCP_HVC:
|
|
addr = 0x08;
|
|
break;
|
|
case EXCP_HYP_TRAP:
|
|
addr = 0x14;
|
|
break;
|
|
default:
|
|
cpu_abort(cs, "Unhandled exception 0x%x\n", cs->exception_index);
|
|
}
|
|
|
|
if (cs->exception_index != EXCP_IRQ && cs->exception_index != EXCP_FIQ) {
|
|
if (!arm_feature(env, ARM_FEATURE_V8)) {
|
|
/*
|
|
* QEMU syndrome values are v8-style. v7 has the IL bit
|
|
* UNK/SBZP for "field not valid" cases, where v8 uses RES1.
|
|
* If this is a v7 CPU, squash the IL bit in those cases.
|
|
*/
|
|
if (cs->exception_index == EXCP_PREFETCH_ABORT ||
|
|
(cs->exception_index == EXCP_DATA_ABORT &&
|
|
!(env->exception.syndrome & ARM_EL_ISV)) ||
|
|
syn_get_ec(env->exception.syndrome) == EC_UNCATEGORIZED) {
|
|
env->exception.syndrome &= ~ARM_EL_IL;
|
|
}
|
|
}
|
|
env->cp15.esr_el[2] = env->exception.syndrome;
|
|
}
|
|
|
|
if (arm_current_el(env) != 2 && addr < 0x14) {
|
|
addr = 0x14;
|
|
}
|
|
|
|
mask = 0;
|
|
if (!(env->cp15.scr_el3 & SCR_EA)) {
|
|
mask |= CPSR_A;
|
|
}
|
|
if (!(env->cp15.scr_el3 & SCR_IRQ)) {
|
|
mask |= CPSR_I;
|
|
}
|
|
if (!(env->cp15.scr_el3 & SCR_FIQ)) {
|
|
mask |= CPSR_F;
|
|
}
|
|
|
|
addr += env->cp15.hvbar;
|
|
|
|
take_aarch32_exception(env, ARM_CPU_MODE_HYP, mask, 0, addr);
|
|
}
|
|
|
|
static void arm_cpu_do_interrupt_aarch32(CPUState *cs)
|
|
{
|
|
ARMCPU *cpu = ARM_CPU(cs);
|
|
CPUARMState *env = &cpu->env;
|
|
uint32_t addr;
|
|
uint32_t mask;
|
|
int new_mode;
|
|
uint32_t offset;
|
|
uint32_t moe;
|
|
|
|
/* If this is a debug exception we must update the DBGDSCR.MOE bits */
|
|
switch (syn_get_ec(env->exception.syndrome)) {
|
|
case EC_BREAKPOINT:
|
|
case EC_BREAKPOINT_SAME_EL:
|
|
moe = 1;
|
|
break;
|
|
case EC_WATCHPOINT:
|
|
case EC_WATCHPOINT_SAME_EL:
|
|
moe = 10;
|
|
break;
|
|
case EC_AA32_BKPT:
|
|
moe = 3;
|
|
break;
|
|
case EC_VECTORCATCH:
|
|
moe = 5;
|
|
break;
|
|
default:
|
|
moe = 0;
|
|
break;
|
|
}
|
|
|
|
if (moe) {
|
|
env->cp15.mdscr_el1 = deposit64(env->cp15.mdscr_el1, 2, 4, moe);
|
|
}
|
|
|
|
if (env->exception.target_el == 2) {
|
|
arm_cpu_do_interrupt_aarch32_hyp(cs);
|
|
return;
|
|
}
|
|
|
|
switch (cs->exception_index) {
|
|
case EXCP_UDEF:
|
|
new_mode = ARM_CPU_MODE_UND;
|
|
addr = 0x04;
|
|
mask = CPSR_I;
|
|
if (env->thumb)
|
|
offset = 2;
|
|
else
|
|
offset = 4;
|
|
break;
|
|
case EXCP_SWI:
|
|
new_mode = ARM_CPU_MODE_SVC;
|
|
addr = 0x08;
|
|
mask = CPSR_I;
|
|
/* The PC already points to the next instruction. */
|
|
offset = 0;
|
|
break;
|
|
case EXCP_BKPT:
|
|
/* Fall through to prefetch abort. */
|
|
case EXCP_PREFETCH_ABORT:
|
|
A32_BANKED_CURRENT_REG_SET(env, ifsr, env->exception.fsr);
|
|
A32_BANKED_CURRENT_REG_SET(env, ifar, env->exception.vaddress);
|
|
qemu_log_mask(CPU_LOG_INT, "...with IFSR 0x%x IFAR 0x%x\n",
|
|
env->exception.fsr, (uint32_t)env->exception.vaddress);
|
|
new_mode = ARM_CPU_MODE_ABT;
|
|
addr = 0x0c;
|
|
mask = CPSR_A | CPSR_I;
|
|
offset = 4;
|
|
break;
|
|
case EXCP_DATA_ABORT:
|
|
A32_BANKED_CURRENT_REG_SET(env, dfsr, env->exception.fsr);
|
|
A32_BANKED_CURRENT_REG_SET(env, dfar, env->exception.vaddress);
|
|
qemu_log_mask(CPU_LOG_INT, "...with DFSR 0x%x DFAR 0x%x\n",
|
|
env->exception.fsr,
|
|
(uint32_t)env->exception.vaddress);
|
|
new_mode = ARM_CPU_MODE_ABT;
|
|
addr = 0x10;
|
|
mask = CPSR_A | CPSR_I;
|
|
offset = 8;
|
|
break;
|
|
case EXCP_IRQ:
|
|
new_mode = ARM_CPU_MODE_IRQ;
|
|
addr = 0x18;
|
|
/* Disable IRQ and imprecise data aborts. */
|
|
mask = CPSR_A | CPSR_I;
|
|
offset = 4;
|
|
if (env->cp15.scr_el3 & SCR_IRQ) {
|
|
/* IRQ routed to monitor mode */
|
|
new_mode = ARM_CPU_MODE_MON;
|
|
mask |= CPSR_F;
|
|
}
|
|
break;
|
|
case EXCP_FIQ:
|
|
new_mode = ARM_CPU_MODE_FIQ;
|
|
addr = 0x1c;
|
|
/* Disable FIQ, IRQ and imprecise data aborts. */
|
|
mask = CPSR_A | CPSR_I | CPSR_F;
|
|
if (env->cp15.scr_el3 & SCR_FIQ) {
|
|
/* FIQ routed to monitor mode */
|
|
new_mode = ARM_CPU_MODE_MON;
|
|
}
|
|
offset = 4;
|
|
break;
|
|
case EXCP_VIRQ:
|
|
new_mode = ARM_CPU_MODE_IRQ;
|
|
addr = 0x18;
|
|
/* Disable IRQ and imprecise data aborts. */
|
|
mask = CPSR_A | CPSR_I;
|
|
offset = 4;
|
|
break;
|
|
case EXCP_VFIQ:
|
|
new_mode = ARM_CPU_MODE_FIQ;
|
|
addr = 0x1c;
|
|
/* Disable FIQ, IRQ and imprecise data aborts. */
|
|
mask = CPSR_A | CPSR_I | CPSR_F;
|
|
offset = 4;
|
|
break;
|
|
case EXCP_SMC:
|
|
new_mode = ARM_CPU_MODE_MON;
|
|
addr = 0x08;
|
|
mask = CPSR_A | CPSR_I | CPSR_F;
|
|
offset = 0;
|
|
break;
|
|
default:
|
|
cpu_abort(cs, "Unhandled exception 0x%x\n", cs->exception_index);
|
|
return; /* Never happens. Keep compiler happy. */
|
|
}
|
|
|
|
if (new_mode == ARM_CPU_MODE_MON) {
|
|
addr += env->cp15.mvbar;
|
|
} else if (A32_BANKED_CURRENT_REG_GET(env, sctlr) & SCTLR_V) {
|
|
/* High vectors. When enabled, base address cannot be remapped. */
|
|
addr += 0xffff0000;
|
|
} else {
|
|
/* ARM v7 architectures provide a vector base address register to remap
|
|
* the interrupt vector table.
|
|
* This register is only followed in non-monitor mode, and is banked.
|
|
* Note: only bits 31:5 are valid.
|
|
*/
|
|
addr += A32_BANKED_CURRENT_REG_GET(env, vbar);
|
|
}
|
|
|
|
if ((env->uncached_cpsr & CPSR_M) == ARM_CPU_MODE_MON) {
|
|
env->cp15.scr_el3 &= ~SCR_NS;
|
|
}
|
|
|
|
take_aarch32_exception(env, new_mode, mask, offset, addr);
|
|
}
|
|
|
|
/* Handle exception entry to a target EL which is using AArch64 */
|
|
static void arm_cpu_do_interrupt_aarch64(CPUState *cs)
|
|
{
|
|
ARMCPU *cpu = ARM_CPU(cs);
|
|
CPUARMState *env = &cpu->env;
|
|
unsigned int new_el = env->exception.target_el;
|
|
target_ulong addr = env->cp15.vbar_el[new_el];
|
|
unsigned int new_mode = aarch64_pstate_mode(new_el, true);
|
|
unsigned int old_mode;
|
|
unsigned int cur_el = arm_current_el(env);
|
|
|
|
/*
|
|
* Note that new_el can never be 0. If cur_el is 0, then
|
|
* el0_a64 is is_a64(), else el0_a64 is ignored.
|
|
*/
|
|
aarch64_sve_change_el(env, cur_el, new_el, is_a64(env));
|
|
|
|
if (cur_el < new_el) {
|
|
/* Entry vector offset depends on whether the implemented EL
|
|
* immediately lower than the target level is using AArch32 or AArch64
|
|
*/
|
|
bool is_aa64;
|
|
uint64_t hcr;
|
|
|
|
switch (new_el) {
|
|
case 3:
|
|
is_aa64 = (env->cp15.scr_el3 & SCR_RW) != 0;
|
|
break;
|
|
case 2:
|
|
hcr = arm_hcr_el2_eff(env);
|
|
if ((hcr & (HCR_E2H | HCR_TGE)) != (HCR_E2H | HCR_TGE)) {
|
|
is_aa64 = (hcr & HCR_RW) != 0;
|
|
break;
|
|
}
|
|
/* fall through */
|
|
case 1:
|
|
is_aa64 = is_a64(env);
|
|
break;
|
|
default:
|
|
g_assert_not_reached();
|
|
}
|
|
|
|
if (is_aa64) {
|
|
addr += 0x400;
|
|
} else {
|
|
addr += 0x600;
|
|
}
|
|
} else if (pstate_read(env) & PSTATE_SP) {
|
|
addr += 0x200;
|
|
}
|
|
|
|
switch (cs->exception_index) {
|
|
case EXCP_PREFETCH_ABORT:
|
|
case EXCP_DATA_ABORT:
|
|
env->cp15.far_el[new_el] = env->exception.vaddress;
|
|
qemu_log_mask(CPU_LOG_INT, "...with FAR 0x%" PRIx64 "\n",
|
|
env->cp15.far_el[new_el]);
|
|
/* fall through */
|
|
case EXCP_BKPT:
|
|
case EXCP_UDEF:
|
|
case EXCP_SWI:
|
|
case EXCP_HVC:
|
|
case EXCP_HYP_TRAP:
|
|
case EXCP_SMC:
|
|
if (syn_get_ec(env->exception.syndrome) == EC_ADVSIMDFPACCESSTRAP) {
|
|
/*
|
|
* QEMU internal FP/SIMD syndromes from AArch32 include the
|
|
* TA and coproc fields which are only exposed if the exception
|
|
* is taken to AArch32 Hyp mode. Mask them out to get a valid
|
|
* AArch64 format syndrome.
|
|
*/
|
|
env->exception.syndrome &= ~MAKE_64BIT_MASK(0, 20);
|
|
}
|
|
env->cp15.esr_el[new_el] = env->exception.syndrome;
|
|
break;
|
|
case EXCP_IRQ:
|
|
case EXCP_VIRQ:
|
|
addr += 0x80;
|
|
break;
|
|
case EXCP_FIQ:
|
|
case EXCP_VFIQ:
|
|
addr += 0x100;
|
|
break;
|
|
default:
|
|
cpu_abort(cs, "Unhandled exception 0x%x\n", cs->exception_index);
|
|
}
|
|
|
|
if (is_a64(env)) {
|
|
old_mode = pstate_read(env);
|
|
aarch64_save_sp(env, arm_current_el(env));
|
|
env->elr_el[new_el] = env->pc;
|
|
} else {
|
|
old_mode = cpsr_read(env);
|
|
env->elr_el[new_el] = env->regs[15];
|
|
|
|
aarch64_sync_32_to_64(env);
|
|
|
|
env->condexec_bits = 0;
|
|
}
|
|
env->banked_spsr[aarch64_banked_spsr_index(new_el)] = old_mode;
|
|
|
|
qemu_log_mask(CPU_LOG_INT, "...with ELR 0x%" PRIx64 "\n",
|
|
env->elr_el[new_el]);
|
|
|
|
if (cpu_isar_feature(aa64_pan, cpu)) {
|
|
/* The value of PSTATE.PAN is normally preserved, except when ... */
|
|
new_mode |= old_mode & PSTATE_PAN;
|
|
switch (new_el) {
|
|
case 2:
|
|
/* ... the target is EL2 with HCR_EL2.{E2H,TGE} == '11' ... */
|
|
if ((arm_hcr_el2_eff(env) & (HCR_E2H | HCR_TGE))
|
|
!= (HCR_E2H | HCR_TGE)) {
|
|
break;
|
|
}
|
|
/* fall through */
|
|
case 1:
|
|
/* ... the target is EL1 ... */
|
|
/* ... and SCTLR_ELx.SPAN == 0, then set to 1. */
|
|
if ((env->cp15.sctlr_el[new_el] & SCTLR_SPAN) == 0) {
|
|
new_mode |= PSTATE_PAN;
|
|
}
|
|
break;
|
|
}
|
|
}
|
|
|
|
pstate_write(env, PSTATE_DAIF | new_mode);
|
|
env->aarch64 = 1;
|
|
aarch64_restore_sp(env, new_el);
|
|
helper_rebuild_hflags_a64(env, new_el);
|
|
|
|
env->pc = addr;
|
|
|
|
qemu_log_mask(CPU_LOG_INT, "...to EL%d PC 0x%" PRIx64 " PSTATE 0x%x\n",
|
|
new_el, env->pc, pstate_read(env));
|
|
}
|
|
|
|
/*
|
|
* Do semihosting call and set the appropriate return value. All the
|
|
* permission and validity checks have been done at translate time.
|
|
*
|
|
* We only see semihosting exceptions in TCG only as they are not
|
|
* trapped to the hypervisor in KVM.
|
|
*/
|
|
#ifdef CONFIG_TCG
|
|
static void handle_semihosting(CPUState *cs)
|
|
{
|
|
ARMCPU *cpu = ARM_CPU(cs);
|
|
CPUARMState *env = &cpu->env;
|
|
|
|
if (is_a64(env)) {
|
|
qemu_log_mask(CPU_LOG_INT,
|
|
"...handling as semihosting call 0x%" PRIx64 "\n",
|
|
env->xregs[0]);
|
|
env->xregs[0] = do_arm_semihosting(env);
|
|
env->pc += 4;
|
|
} else {
|
|
qemu_log_mask(CPU_LOG_INT,
|
|
"...handling as semihosting call 0x%x\n",
|
|
env->regs[0]);
|
|
env->regs[0] = do_arm_semihosting(env);
|
|
env->regs[15] += env->thumb ? 2 : 4;
|
|
}
|
|
}
|
|
#endif
|
|
|
|
/* Handle a CPU exception for A and R profile CPUs.
|
|
* Do any appropriate logging, handle PSCI calls, and then hand off
|
|
* to the AArch64-entry or AArch32-entry function depending on the
|
|
* target exception level's register width.
|
|
*/
|
|
void arm_cpu_do_interrupt(CPUState *cs)
|
|
{
|
|
ARMCPU *cpu = ARM_CPU(cs);
|
|
CPUARMState *env = &cpu->env;
|
|
unsigned int new_el = env->exception.target_el;
|
|
|
|
assert(!arm_feature(env, ARM_FEATURE_M));
|
|
|
|
arm_log_exception(cs->exception_index);
|
|
qemu_log_mask(CPU_LOG_INT, "...from EL%d to EL%d\n", arm_current_el(env),
|
|
new_el);
|
|
if (qemu_loglevel_mask(CPU_LOG_INT)
|
|
&& !excp_is_internal(cs->exception_index)) {
|
|
qemu_log_mask(CPU_LOG_INT, "...with ESR 0x%x/0x%" PRIx32 "\n",
|
|
syn_get_ec(env->exception.syndrome),
|
|
env->exception.syndrome);
|
|
}
|
|
|
|
if (arm_is_psci_call(cpu, cs->exception_index)) {
|
|
arm_handle_psci_call(cpu);
|
|
qemu_log_mask(CPU_LOG_INT, "...handled as PSCI call\n");
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* Semihosting semantics depend on the register width of the code
|
|
* that caused the exception, not the target exception level, so
|
|
* must be handled here.
|
|
*/
|
|
#ifdef CONFIG_TCG
|
|
if (cs->exception_index == EXCP_SEMIHOST) {
|
|
handle_semihosting(cs);
|
|
return;
|
|
}
|
|
#endif
|
|
|
|
/* Hooks may change global state so BQL should be held, also the
|
|
* BQL needs to be held for any modification of
|
|
* cs->interrupt_request.
|
|
*/
|
|
g_assert(qemu_mutex_iothread_locked());
|
|
|
|
arm_call_pre_el_change_hook(cpu);
|
|
|
|
assert(!excp_is_internal(cs->exception_index));
|
|
if (arm_el_is_aa64(env, new_el)) {
|
|
arm_cpu_do_interrupt_aarch64(cs);
|
|
} else {
|
|
arm_cpu_do_interrupt_aarch32(cs);
|
|
}
|
|
|
|
arm_call_el_change_hook(cpu);
|
|
|
|
if (!kvm_enabled()) {
|
|
cs->interrupt_request |= CPU_INTERRUPT_EXITTB;
|
|
}
|
|
}
|
|
#endif /* !CONFIG_USER_ONLY */
|
|
|
|
/* Return the exception level which controls this address translation regime */
|
|
static uint32_t regime_el(CPUARMState *env, ARMMMUIdx mmu_idx)
|
|
{
|
|
switch (mmu_idx) {
|
|
case ARMMMUIdx_E20_0:
|
|
case ARMMMUIdx_E20_2:
|
|
case ARMMMUIdx_E20_2_PAN:
|
|
case ARMMMUIdx_Stage2:
|
|
case ARMMMUIdx_E2:
|
|
return 2;
|
|
case ARMMMUIdx_SE3:
|
|
return 3;
|
|
case ARMMMUIdx_SE10_0:
|
|
return arm_el_is_aa64(env, 3) ? 1 : 3;
|
|
case ARMMMUIdx_SE10_1:
|
|
case ARMMMUIdx_SE10_1_PAN:
|
|
case ARMMMUIdx_Stage1_E0:
|
|
case ARMMMUIdx_Stage1_E1:
|
|
case ARMMMUIdx_Stage1_E1_PAN:
|
|
case ARMMMUIdx_E10_0:
|
|
case ARMMMUIdx_E10_1:
|
|
case ARMMMUIdx_E10_1_PAN:
|
|
case ARMMMUIdx_MPrivNegPri:
|
|
case ARMMMUIdx_MUserNegPri:
|
|
case ARMMMUIdx_MPriv:
|
|
case ARMMMUIdx_MUser:
|
|
case ARMMMUIdx_MSPrivNegPri:
|
|
case ARMMMUIdx_MSUserNegPri:
|
|
case ARMMMUIdx_MSPriv:
|
|
case ARMMMUIdx_MSUser:
|
|
return 1;
|
|
default:
|
|
g_assert_not_reached();
|
|
}
|
|
}
|
|
|
|
uint64_t arm_sctlr(CPUARMState *env, int el)
|
|
{
|
|
/* Only EL0 needs to be adjusted for EL1&0 or EL2&0. */
|
|
if (el == 0) {
|
|
ARMMMUIdx mmu_idx = arm_mmu_idx_el(env, 0);
|
|
el = (mmu_idx == ARMMMUIdx_E20_0 ? 2 : 1);
|
|
}
|
|
return env->cp15.sctlr_el[el];
|
|
}
|
|
|
|
/* Return the SCTLR value which controls this address translation regime */
|
|
static inline uint64_t regime_sctlr(CPUARMState *env, ARMMMUIdx mmu_idx)
|
|
{
|
|
return env->cp15.sctlr_el[regime_el(env, mmu_idx)];
|
|
}
|
|
|
|
#ifndef CONFIG_USER_ONLY
|
|
|
|
/* Return true if the specified stage of address translation is disabled */
|
|
static inline bool regime_translation_disabled(CPUARMState *env,
|
|
ARMMMUIdx mmu_idx)
|
|
{
|
|
if (arm_feature(env, ARM_FEATURE_M)) {
|
|
switch (env->v7m.mpu_ctrl[regime_is_secure(env, mmu_idx)] &
|
|
(R_V7M_MPU_CTRL_ENABLE_MASK | R_V7M_MPU_CTRL_HFNMIENA_MASK)) {
|
|
case R_V7M_MPU_CTRL_ENABLE_MASK:
|
|
/* Enabled, but not for HardFault and NMI */
|
|
return mmu_idx & ARM_MMU_IDX_M_NEGPRI;
|
|
case R_V7M_MPU_CTRL_ENABLE_MASK | R_V7M_MPU_CTRL_HFNMIENA_MASK:
|
|
/* Enabled for all cases */
|
|
return false;
|
|
case 0:
|
|
default:
|
|
/* HFNMIENA set and ENABLE clear is UNPREDICTABLE, but
|
|
* we warned about that in armv7m_nvic.c when the guest set it.
|
|
*/
|
|
return true;
|
|
}
|
|
}
|
|
|
|
if (mmu_idx == ARMMMUIdx_Stage2) {
|
|
/* HCR.DC means HCR.VM behaves as 1 */
|
|
return (env->cp15.hcr_el2 & (HCR_DC | HCR_VM)) == 0;
|
|
}
|
|
|
|
if (env->cp15.hcr_el2 & HCR_TGE) {
|
|
/* TGE means that NS EL0/1 act as if SCTLR_EL1.M is zero */
|
|
if (!regime_is_secure(env, mmu_idx) && regime_el(env, mmu_idx) == 1) {
|
|
return true;
|
|
}
|
|
}
|
|
|
|
if ((env->cp15.hcr_el2 & HCR_DC) && arm_mmu_idx_is_stage1_of_2(mmu_idx)) {
|
|
/* HCR.DC means SCTLR_EL1.M behaves as 0 */
|
|
return true;
|
|
}
|
|
|
|
return (regime_sctlr(env, mmu_idx) & SCTLR_M) == 0;
|
|
}
|
|
|
|
static inline bool regime_translation_big_endian(CPUARMState *env,
|
|
ARMMMUIdx mmu_idx)
|
|
{
|
|
return (regime_sctlr(env, mmu_idx) & SCTLR_EE) != 0;
|
|
}
|
|
|
|
/* Return the TTBR associated with this translation regime */
|
|
static inline uint64_t regime_ttbr(CPUARMState *env, ARMMMUIdx mmu_idx,
|
|
int ttbrn)
|
|
{
|
|
if (mmu_idx == ARMMMUIdx_Stage2) {
|
|
return env->cp15.vttbr_el2;
|
|
}
|
|
if (ttbrn == 0) {
|
|
return env->cp15.ttbr0_el[regime_el(env, mmu_idx)];
|
|
} else {
|
|
return env->cp15.ttbr1_el[regime_el(env, mmu_idx)];
|
|
}
|
|
}
|
|
|
|
#endif /* !CONFIG_USER_ONLY */
|
|
|
|
/* Return the TCR controlling this translation regime */
|
|
static inline TCR *regime_tcr(CPUARMState *env, ARMMMUIdx mmu_idx)
|
|
{
|
|
if (mmu_idx == ARMMMUIdx_Stage2) {
|
|
return &env->cp15.vtcr_el2;
|
|
}
|
|
return &env->cp15.tcr_el[regime_el(env, mmu_idx)];
|
|
}
|
|
|
|
/* Convert a possible stage1+2 MMU index into the appropriate
|
|
* stage 1 MMU index
|
|
*/
|
|
static inline ARMMMUIdx stage_1_mmu_idx(ARMMMUIdx mmu_idx)
|
|
{
|
|
switch (mmu_idx) {
|
|
case ARMMMUIdx_E10_0:
|
|
return ARMMMUIdx_Stage1_E0;
|
|
case ARMMMUIdx_E10_1:
|
|
return ARMMMUIdx_Stage1_E1;
|
|
case ARMMMUIdx_E10_1_PAN:
|
|
return ARMMMUIdx_Stage1_E1_PAN;
|
|
default:
|
|
return mmu_idx;
|
|
}
|
|
}
|
|
|
|
/* Return true if the translation regime is using LPAE format page tables */
|
|
static inline bool regime_using_lpae_format(CPUARMState *env,
|
|
ARMMMUIdx mmu_idx)
|
|
{
|
|
int el = regime_el(env, mmu_idx);
|
|
if (el == 2 || arm_el_is_aa64(env, el)) {
|
|
return true;
|
|
}
|
|
if (arm_feature(env, ARM_FEATURE_LPAE)
|
|
&& (regime_tcr(env, mmu_idx)->raw_tcr & TTBCR_EAE)) {
|
|
return true;
|
|
}
|
|
return false;
|
|
}
|
|
|
|
/* Returns true if the stage 1 translation regime is using LPAE format page
|
|
* tables. Used when raising alignment exceptions, whose FSR changes depending
|
|
* on whether the long or short descriptor format is in use. */
|
|
bool arm_s1_regime_using_lpae_format(CPUARMState *env, ARMMMUIdx mmu_idx)
|
|
{
|
|
mmu_idx = stage_1_mmu_idx(mmu_idx);
|
|
|
|
return regime_using_lpae_format(env, mmu_idx);
|
|
}
|
|
|
|
#ifndef CONFIG_USER_ONLY
|
|
static inline bool regime_is_user(CPUARMState *env, ARMMMUIdx mmu_idx)
|
|
{
|
|
switch (mmu_idx) {
|
|
case ARMMMUIdx_SE10_0:
|
|
case ARMMMUIdx_E20_0:
|
|
case ARMMMUIdx_Stage1_E0:
|
|
case ARMMMUIdx_MUser:
|
|
case ARMMMUIdx_MSUser:
|
|
case ARMMMUIdx_MUserNegPri:
|
|
case ARMMMUIdx_MSUserNegPri:
|
|
return true;
|
|
default:
|
|
return false;
|
|
case ARMMMUIdx_E10_0:
|
|
case ARMMMUIdx_E10_1:
|
|
case ARMMMUIdx_E10_1_PAN:
|
|
g_assert_not_reached();
|
|
}
|
|
}
|
|
|
|
/* Translate section/page access permissions to page
|
|
* R/W protection flags
|
|
*
|
|
* @env: CPUARMState
|
|
* @mmu_idx: MMU index indicating required translation regime
|
|
* @ap: The 3-bit access permissions (AP[2:0])
|
|
* @domain_prot: The 2-bit domain access permissions
|
|
*/
|
|
static inline int ap_to_rw_prot(CPUARMState *env, ARMMMUIdx mmu_idx,
|
|
int ap, int domain_prot)
|
|
{
|
|
bool is_user = regime_is_user(env, mmu_idx);
|
|
|
|
if (domain_prot == 3) {
|
|
return PAGE_READ | PAGE_WRITE;
|
|
}
|
|
|
|
switch (ap) {
|
|
case 0:
|
|
if (arm_feature(env, ARM_FEATURE_V7)) {
|
|
return 0;
|
|
}
|
|
switch (regime_sctlr(env, mmu_idx) & (SCTLR_S | SCTLR_R)) {
|
|
case SCTLR_S:
|
|
return is_user ? 0 : PAGE_READ;
|
|
case SCTLR_R:
|
|
return PAGE_READ;
|
|
default:
|
|
return 0;
|
|
}
|
|
case 1:
|
|
return is_user ? 0 : PAGE_READ | PAGE_WRITE;
|
|
case 2:
|
|
if (is_user) {
|
|
return PAGE_READ;
|
|
} else {
|
|
return PAGE_READ | PAGE_WRITE;
|
|
}
|
|
case 3:
|
|
return PAGE_READ | PAGE_WRITE;
|
|
case 4: /* Reserved. */
|
|
return 0;
|
|
case 5:
|
|
return is_user ? 0 : PAGE_READ;
|
|
case 6:
|
|
return PAGE_READ;
|
|
case 7:
|
|
if (!arm_feature(env, ARM_FEATURE_V6K)) {
|
|
return 0;
|
|
}
|
|
return PAGE_READ;
|
|
default:
|
|
g_assert_not_reached();
|
|
}
|
|
}
|
|
|
|
/* Translate section/page access permissions to page
|
|
* R/W protection flags.
|
|
*
|
|
* @ap: The 2-bit simple AP (AP[2:1])
|
|
* @is_user: TRUE if accessing from PL0
|
|
*/
|
|
static inline int simple_ap_to_rw_prot_is_user(int ap, bool is_user)
|
|
{
|
|
switch (ap) {
|
|
case 0:
|
|
return is_user ? 0 : PAGE_READ | PAGE_WRITE;
|
|
case 1:
|
|
return PAGE_READ | PAGE_WRITE;
|
|
case 2:
|
|
return is_user ? 0 : PAGE_READ;
|
|
case 3:
|
|
return PAGE_READ;
|
|
default:
|
|
g_assert_not_reached();
|
|
}
|
|
}
|
|
|
|
static inline int
|
|
simple_ap_to_rw_prot(CPUARMState *env, ARMMMUIdx mmu_idx, int ap)
|
|
{
|
|
return simple_ap_to_rw_prot_is_user(ap, regime_is_user(env, mmu_idx));
|
|
}
|
|
|
|
/* Translate S2 section/page access permissions to protection flags
|
|
*
|
|
* @env: CPUARMState
|
|
* @s2ap: The 2-bit stage2 access permissions (S2AP)
|
|
* @xn: XN (execute-never) bit
|
|
*/
|
|
static int get_S2prot(CPUARMState *env, int s2ap, int xn)
|
|
{
|
|
int prot = 0;
|
|
|
|
if (s2ap & 1) {
|
|
prot |= PAGE_READ;
|
|
}
|
|
if (s2ap & 2) {
|
|
prot |= PAGE_WRITE;
|
|
}
|
|
if (!xn) {
|
|
if (arm_el_is_aa64(env, 2) || prot & PAGE_READ) {
|
|
prot |= PAGE_EXEC;
|
|
}
|
|
}
|
|
return prot;
|
|
}
|
|
|
|
/* Translate section/page access permissions to protection flags
|
|
*
|
|
* @env: CPUARMState
|
|
* @mmu_idx: MMU index indicating required translation regime
|
|
* @is_aa64: TRUE if AArch64
|
|
* @ap: The 2-bit simple AP (AP[2:1])
|
|
* @ns: NS (non-secure) bit
|
|
* @xn: XN (execute-never) bit
|
|
* @pxn: PXN (privileged execute-never) bit
|
|
*/
|
|
static int get_S1prot(CPUARMState *env, ARMMMUIdx mmu_idx, bool is_aa64,
|
|
int ap, int ns, int xn, int pxn)
|
|
{
|
|
bool is_user = regime_is_user(env, mmu_idx);
|
|
int prot_rw, user_rw;
|
|
bool have_wxn;
|
|
int wxn = 0;
|
|
|
|
assert(mmu_idx != ARMMMUIdx_Stage2);
|
|
|
|
user_rw = simple_ap_to_rw_prot_is_user(ap, true);
|
|
if (is_user) {
|
|
prot_rw = user_rw;
|
|
} else {
|
|
if (user_rw && regime_is_pan(env, mmu_idx)) {
|
|
return 0;
|
|
}
|
|
prot_rw = simple_ap_to_rw_prot_is_user(ap, false);
|
|
}
|
|
|
|
if (ns && arm_is_secure(env) && (env->cp15.scr_el3 & SCR_SIF)) {
|
|
return prot_rw;
|
|
}
|
|
|
|
/* TODO have_wxn should be replaced with
|
|
* ARM_FEATURE_V8 || (ARM_FEATURE_V7 && ARM_FEATURE_EL2)
|
|
* when ARM_FEATURE_EL2 starts getting set. For now we assume all LPAE
|
|
* compatible processors have EL2, which is required for [U]WXN.
|
|
*/
|
|
have_wxn = arm_feature(env, ARM_FEATURE_LPAE);
|
|
|
|
if (have_wxn) {
|
|
wxn = regime_sctlr(env, mmu_idx) & SCTLR_WXN;
|
|
}
|
|
|
|
if (is_aa64) {
|
|
if (regime_has_2_ranges(mmu_idx) && !is_user) {
|
|
xn = pxn || (user_rw & PAGE_WRITE);
|
|
}
|
|
} else if (arm_feature(env, ARM_FEATURE_V7)) {
|
|
switch (regime_el(env, mmu_idx)) {
|
|
case 1:
|
|
case 3:
|
|
if (is_user) {
|
|
xn = xn || !(user_rw & PAGE_READ);
|
|
} else {
|
|
int uwxn = 0;
|
|
if (have_wxn) {
|
|
uwxn = regime_sctlr(env, mmu_idx) & SCTLR_UWXN;
|
|
}
|
|
xn = xn || !(prot_rw & PAGE_READ) || pxn ||
|
|
(uwxn && (user_rw & PAGE_WRITE));
|
|
}
|
|
break;
|
|
case 2:
|
|
break;
|
|
}
|
|
} else {
|
|
xn = wxn = 0;
|
|
}
|
|
|
|
if (xn || (wxn && (prot_rw & PAGE_WRITE))) {
|
|
return prot_rw;
|
|
}
|
|
return prot_rw | PAGE_EXEC;
|
|
}
|
|
|
|
static bool get_level1_table_address(CPUARMState *env, ARMMMUIdx mmu_idx,
|
|
uint32_t *table, uint32_t address)
|
|
{
|
|
/* Note that we can only get here for an AArch32 PL0/PL1 lookup */
|
|
TCR *tcr = regime_tcr(env, mmu_idx);
|
|
|
|
if (address & tcr->mask) {
|
|
if (tcr->raw_tcr & TTBCR_PD1) {
|
|
/* Translation table walk disabled for TTBR1 */
|
|
return false;
|
|
}
|
|
*table = regime_ttbr(env, mmu_idx, 1) & 0xffffc000;
|
|
} else {
|
|
if (tcr->raw_tcr & TTBCR_PD0) {
|
|
/* Translation table walk disabled for TTBR0 */
|
|
return false;
|
|
}
|
|
*table = regime_ttbr(env, mmu_idx, 0) & tcr->base_mask;
|
|
}
|
|
*table |= (address >> 18) & 0x3ffc;
|
|
return true;
|
|
}
|
|
|
|
/* Translate a S1 pagetable walk through S2 if needed. */
|
|
static hwaddr S1_ptw_translate(CPUARMState *env, ARMMMUIdx mmu_idx,
|
|
hwaddr addr, MemTxAttrs txattrs,
|
|
ARMMMUFaultInfo *fi)
|
|
{
|
|
if (arm_mmu_idx_is_stage1_of_2(mmu_idx) &&
|
|
!regime_translation_disabled(env, ARMMMUIdx_Stage2)) {
|
|
target_ulong s2size;
|
|
hwaddr s2pa;
|
|
int s2prot;
|
|
int ret;
|
|
ARMCacheAttrs cacheattrs = {};
|
|
ARMCacheAttrs *pcacheattrs = NULL;
|
|
|
|
if (env->cp15.hcr_el2 & HCR_PTW) {
|
|
/*
|
|
* PTW means we must fault if this S1 walk touches S2 Device
|
|
* memory; otherwise we don't care about the attributes and can
|
|
* save the S2 translation the effort of computing them.
|
|
*/
|
|
pcacheattrs = &cacheattrs;
|
|
}
|
|
|
|
ret = get_phys_addr_lpae(env, addr, 0, ARMMMUIdx_Stage2, &s2pa,
|
|
&txattrs, &s2prot, &s2size, fi, pcacheattrs);
|
|
if (ret) {
|
|
assert(fi->type != ARMFault_None);
|
|
fi->s2addr = addr;
|
|
fi->stage2 = true;
|
|
fi->s1ptw = true;
|
|
return ~0;
|
|
}
|
|
if (pcacheattrs && (pcacheattrs->attrs & 0xf0) == 0) {
|
|
/* Access was to Device memory: generate Permission fault */
|
|
fi->type = ARMFault_Permission;
|
|
fi->s2addr = addr;
|
|
fi->stage2 = true;
|
|
fi->s1ptw = true;
|
|
return ~0;
|
|
}
|
|
addr = s2pa;
|
|
}
|
|
return addr;
|
|
}
|
|
|
|
/* All loads done in the course of a page table walk go through here. */
|
|
static uint32_t arm_ldl_ptw(CPUState *cs, hwaddr addr, bool is_secure,
|
|
ARMMMUIdx mmu_idx, ARMMMUFaultInfo *fi)
|
|
{
|
|
ARMCPU *cpu = ARM_CPU(cs);
|
|
CPUARMState *env = &cpu->env;
|
|
MemTxAttrs attrs = {};
|
|
MemTxResult result = MEMTX_OK;
|
|
AddressSpace *as;
|
|
uint32_t data;
|
|
|
|
attrs.secure = is_secure;
|
|
as = arm_addressspace(cs, attrs);
|
|
addr = S1_ptw_translate(env, mmu_idx, addr, attrs, fi);
|
|
if (fi->s1ptw) {
|
|
return 0;
|
|
}
|
|
if (regime_translation_big_endian(env, mmu_idx)) {
|
|
data = address_space_ldl_be(as, addr, attrs, &result);
|
|
} else {
|
|
data = address_space_ldl_le(as, addr, attrs, &result);
|
|
}
|
|
if (result == MEMTX_OK) {
|
|
return data;
|
|
}
|
|
fi->type = ARMFault_SyncExternalOnWalk;
|
|
fi->ea = arm_extabort_type(result);
|
|
return 0;
|
|
}
|
|
|
|
static uint64_t arm_ldq_ptw(CPUState *cs, hwaddr addr, bool is_secure,
|
|
ARMMMUIdx mmu_idx, ARMMMUFaultInfo *fi)
|
|
{
|
|
ARMCPU *cpu = ARM_CPU(cs);
|
|
CPUARMState *env = &cpu->env;
|
|
MemTxAttrs attrs = {};
|
|
MemTxResult result = MEMTX_OK;
|
|
AddressSpace *as;
|
|
uint64_t data;
|
|
|
|
attrs.secure = is_secure;
|
|
as = arm_addressspace(cs, attrs);
|
|
addr = S1_ptw_translate(env, mmu_idx, addr, attrs, fi);
|
|
if (fi->s1ptw) {
|
|
return 0;
|
|
}
|
|
if (regime_translation_big_endian(env, mmu_idx)) {
|
|
data = address_space_ldq_be(as, addr, attrs, &result);
|
|
} else {
|
|
data = address_space_ldq_le(as, addr, attrs, &result);
|
|
}
|
|
if (result == MEMTX_OK) {
|
|
return data;
|
|
}
|
|
fi->type = ARMFault_SyncExternalOnWalk;
|
|
fi->ea = arm_extabort_type(result);
|
|
return 0;
|
|
}
|
|
|
|
static bool get_phys_addr_v5(CPUARMState *env, uint32_t address,
|
|
MMUAccessType access_type, ARMMMUIdx mmu_idx,
|
|
hwaddr *phys_ptr, int *prot,
|
|
target_ulong *page_size,
|
|
ARMMMUFaultInfo *fi)
|
|
{
|
|
CPUState *cs = env_cpu(env);
|
|
int level = 1;
|
|
uint32_t table;
|
|
uint32_t desc;
|
|
int type;
|
|
int ap;
|
|
int domain = 0;
|
|
int domain_prot;
|
|
hwaddr phys_addr;
|
|
uint32_t dacr;
|
|
|
|
/* Pagetable walk. */
|
|
/* Lookup l1 descriptor. */
|
|
if (!get_level1_table_address(env, mmu_idx, &table, address)) {
|
|
/* Section translation fault if page walk is disabled by PD0 or PD1 */
|
|
fi->type = ARMFault_Translation;
|
|
goto do_fault;
|
|
}
|
|
desc = arm_ldl_ptw(cs, table, regime_is_secure(env, mmu_idx),
|
|
mmu_idx, fi);
|
|
if (fi->type != ARMFault_None) {
|
|
goto do_fault;
|
|
}
|
|
type = (desc & 3);
|
|
domain = (desc >> 5) & 0x0f;
|
|
if (regime_el(env, mmu_idx) == 1) {
|
|
dacr = env->cp15.dacr_ns;
|
|
} else {
|
|
dacr = env->cp15.dacr_s;
|
|
}
|
|
domain_prot = (dacr >> (domain * 2)) & 3;
|
|
if (type == 0) {
|
|
/* Section translation fault. */
|
|
fi->type = ARMFault_Translation;
|
|
goto do_fault;
|
|
}
|
|
if (type != 2) {
|
|
level = 2;
|
|
}
|
|
if (domain_prot == 0 || domain_prot == 2) {
|
|
fi->type = ARMFault_Domain;
|
|
goto do_fault;
|
|
}
|
|
if (type == 2) {
|
|
/* 1Mb section. */
|
|
phys_addr = (desc & 0xfff00000) | (address & 0x000fffff);
|
|
ap = (desc >> 10) & 3;
|
|
*page_size = 1024 * 1024;
|
|
} else {
|
|
/* Lookup l2 entry. */
|
|
if (type == 1) {
|
|
/* Coarse pagetable. */
|
|
table = (desc & 0xfffffc00) | ((address >> 10) & 0x3fc);
|
|
} else {
|
|
/* Fine pagetable. */
|
|
table = (desc & 0xfffff000) | ((address >> 8) & 0xffc);
|
|
}
|
|
desc = arm_ldl_ptw(cs, table, regime_is_secure(env, mmu_idx),
|
|
mmu_idx, fi);
|
|
if (fi->type != ARMFault_None) {
|
|
goto do_fault;
|
|
}
|
|
switch (desc & 3) {
|
|
case 0: /* Page translation fault. */
|
|
fi->type = ARMFault_Translation;
|
|
goto do_fault;
|
|
case 1: /* 64k page. */
|
|
phys_addr = (desc & 0xffff0000) | (address & 0xffff);
|
|
ap = (desc >> (4 + ((address >> 13) & 6))) & 3;
|
|
*page_size = 0x10000;
|
|
break;
|
|
case 2: /* 4k page. */
|
|
phys_addr = (desc & 0xfffff000) | (address & 0xfff);
|
|
ap = (desc >> (4 + ((address >> 9) & 6))) & 3;
|
|
*page_size = 0x1000;
|
|
break;
|
|
case 3: /* 1k page, or ARMv6/XScale "extended small (4k) page" */
|
|
if (type == 1) {
|
|
/* ARMv6/XScale extended small page format */
|
|
if (arm_feature(env, ARM_FEATURE_XSCALE)
|
|
|| arm_feature(env, ARM_FEATURE_V6)) {
|
|
phys_addr = (desc & 0xfffff000) | (address & 0xfff);
|
|
*page_size = 0x1000;
|
|
} else {
|
|
/* UNPREDICTABLE in ARMv5; we choose to take a
|
|
* page translation fault.
|
|
*/
|
|
fi->type = ARMFault_Translation;
|
|
goto do_fault;
|
|
}
|
|
} else {
|
|
phys_addr = (desc & 0xfffffc00) | (address & 0x3ff);
|
|
*page_size = 0x400;
|
|
}
|
|
ap = (desc >> 4) & 3;
|
|
break;
|
|
default:
|
|
/* Never happens, but compiler isn't smart enough to tell. */
|
|
abort();
|
|
}
|
|
}
|
|
*prot = ap_to_rw_prot(env, mmu_idx, ap, domain_prot);
|
|
*prot |= *prot ? PAGE_EXEC : 0;
|
|
if (!(*prot & (1 << access_type))) {
|
|
/* Access permission fault. */
|
|
fi->type = ARMFault_Permission;
|
|
goto do_fault;
|
|
}
|
|
*phys_ptr = phys_addr;
|
|
return false;
|
|
do_fault:
|
|
fi->domain = domain;
|
|
fi->level = level;
|
|
return true;
|
|
}
|
|
|
|
static bool get_phys_addr_v6(CPUARMState *env, uint32_t address,
|
|
MMUAccessType access_type, ARMMMUIdx mmu_idx,
|
|
hwaddr *phys_ptr, MemTxAttrs *attrs, int *prot,
|
|
target_ulong *page_size, ARMMMUFaultInfo *fi)
|
|
{
|
|
CPUState *cs = env_cpu(env);
|
|
int level = 1;
|
|
uint32_t table;
|
|
uint32_t desc;
|
|
uint32_t xn;
|
|
uint32_t pxn = 0;
|
|
int type;
|
|
int ap;
|
|
int domain = 0;
|
|
int domain_prot;
|
|
hwaddr phys_addr;
|
|
uint32_t dacr;
|
|
bool ns;
|
|
|
|
/* Pagetable walk. */
|
|
/* Lookup l1 descriptor. */
|
|
if (!get_level1_table_address(env, mmu_idx, &table, address)) {
|
|
/* Section translation fault if page walk is disabled by PD0 or PD1 */
|
|
fi->type = ARMFault_Translation;
|
|
goto do_fault;
|
|
}
|
|
desc = arm_ldl_ptw(cs, table, regime_is_secure(env, mmu_idx),
|
|
mmu_idx, fi);
|
|
if (fi->type != ARMFault_None) {
|
|
goto do_fault;
|
|
}
|
|
type = (desc & 3);
|
|
if (type == 0 || (type == 3 && !arm_feature(env, ARM_FEATURE_PXN))) {
|
|
/* Section translation fault, or attempt to use the encoding
|
|
* which is Reserved on implementations without PXN.
|
|
*/
|
|
fi->type = ARMFault_Translation;
|
|
goto do_fault;
|
|
}
|
|
if ((type == 1) || !(desc & (1 << 18))) {
|
|
/* Page or Section. */
|
|
domain = (desc >> 5) & 0x0f;
|
|
}
|
|
if (regime_el(env, mmu_idx) == 1) {
|
|
dacr = env->cp15.dacr_ns;
|
|
} else {
|
|
dacr = env->cp15.dacr_s;
|
|
}
|
|
if (type == 1) {
|
|
level = 2;
|
|
}
|
|
domain_prot = (dacr >> (domain * 2)) & 3;
|
|
if (domain_prot == 0 || domain_prot == 2) {
|
|
/* Section or Page domain fault */
|
|
fi->type = ARMFault_Domain;
|
|
goto do_fault;
|
|
}
|
|
if (type != 1) {
|
|
if (desc & (1 << 18)) {
|
|
/* Supersection. */
|
|
phys_addr = (desc & 0xff000000) | (address & 0x00ffffff);
|
|
phys_addr |= (uint64_t)extract32(desc, 20, 4) << 32;
|
|
phys_addr |= (uint64_t)extract32(desc, 5, 4) << 36;
|
|
*page_size = 0x1000000;
|
|
} else {
|
|
/* Section. */
|
|
phys_addr = (desc & 0xfff00000) | (address & 0x000fffff);
|
|
*page_size = 0x100000;
|
|
}
|
|
ap = ((desc >> 10) & 3) | ((desc >> 13) & 4);
|
|
xn = desc & (1 << 4);
|
|
pxn = desc & 1;
|
|
ns = extract32(desc, 19, 1);
|
|
} else {
|
|
if (arm_feature(env, ARM_FEATURE_PXN)) {
|
|
pxn = (desc >> 2) & 1;
|
|
}
|
|
ns = extract32(desc, 3, 1);
|
|
/* Lookup l2 entry. */
|
|
table = (desc & 0xfffffc00) | ((address >> 10) & 0x3fc);
|
|
desc = arm_ldl_ptw(cs, table, regime_is_secure(env, mmu_idx),
|
|
mmu_idx, fi);
|
|
if (fi->type != ARMFault_None) {
|
|
goto do_fault;
|
|
}
|
|
ap = ((desc >> 4) & 3) | ((desc >> 7) & 4);
|
|
switch (desc & 3) {
|
|
case 0: /* Page translation fault. */
|
|
fi->type = ARMFault_Translation;
|
|
goto do_fault;
|
|
case 1: /* 64k page. */
|
|
phys_addr = (desc & 0xffff0000) | (address & 0xffff);
|
|
xn = desc & (1 << 15);
|
|
*page_size = 0x10000;
|
|
break;
|
|
case 2: case 3: /* 4k page. */
|
|
phys_addr = (desc & 0xfffff000) | (address & 0xfff);
|
|
xn = desc & 1;
|
|
*page_size = 0x1000;
|
|
break;
|
|
default:
|
|
/* Never happens, but compiler isn't smart enough to tell. */
|
|
abort();
|
|
}
|
|
}
|
|
if (domain_prot == 3) {
|
|
*prot = PAGE_READ | PAGE_WRITE | PAGE_EXEC;
|
|
} else {
|
|
if (pxn && !regime_is_user(env, mmu_idx)) {
|
|
xn = 1;
|
|
}
|
|
if (xn && access_type == MMU_INST_FETCH) {
|
|
fi->type = ARMFault_Permission;
|
|
goto do_fault;
|
|
}
|
|
|
|
if (arm_feature(env, ARM_FEATURE_V6K) &&
|
|
(regime_sctlr(env, mmu_idx) & SCTLR_AFE)) {
|
|
/* The simplified model uses AP[0] as an access control bit. */
|
|
if ((ap & 1) == 0) {
|
|
/* Access flag fault. */
|
|
fi->type = ARMFault_AccessFlag;
|
|
goto do_fault;
|
|
}
|
|
*prot = simple_ap_to_rw_prot(env, mmu_idx, ap >> 1);
|
|
} else {
|
|
*prot = ap_to_rw_prot(env, mmu_idx, ap, domain_prot);
|
|
}
|
|
if (*prot && !xn) {
|
|
*prot |= PAGE_EXEC;
|
|
}
|
|
if (!(*prot & (1 << access_type))) {
|
|
/* Access permission fault. */
|
|
fi->type = ARMFault_Permission;
|
|
goto do_fault;
|
|
}
|
|
}
|
|
if (ns) {
|
|
/* The NS bit will (as required by the architecture) have no effect if
|
|
* the CPU doesn't support TZ or this is a non-secure translation
|
|
* regime, because the attribute will already be non-secure.
|
|
*/
|
|
attrs->secure = false;
|
|
}
|
|
*phys_ptr = phys_addr;
|
|
return false;
|
|
do_fault:
|
|
fi->domain = domain;
|
|
fi->level = level;
|
|
return true;
|
|
}
|
|
|
|
/*
|
|
* check_s2_mmu_setup
|
|
* @cpu: ARMCPU
|
|
* @is_aa64: True if the translation regime is in AArch64 state
|
|
* @startlevel: Suggested starting level
|
|
* @inputsize: Bitsize of IPAs
|
|
* @stride: Page-table stride (See the ARM ARM)
|
|
*
|
|
* Returns true if the suggested S2 translation parameters are OK and
|
|
* false otherwise.
|
|
*/
|
|
static bool check_s2_mmu_setup(ARMCPU *cpu, bool is_aa64, int level,
|
|
int inputsize, int stride)
|
|
{
|
|
const int grainsize = stride + 3;
|
|
int startsizecheck;
|
|
|
|
/* Negative levels are never allowed. */
|
|
if (level < 0) {
|
|
return false;
|
|
}
|
|
|
|
startsizecheck = inputsize - ((3 - level) * stride + grainsize);
|
|
if (startsizecheck < 1 || startsizecheck > stride + 4) {
|
|
return false;
|
|
}
|
|
|
|
if (is_aa64) {
|
|
CPUARMState *env = &cpu->env;
|
|
unsigned int pamax = arm_pamax(cpu);
|
|
|
|
switch (stride) {
|
|
case 13: /* 64KB Pages. */
|
|
if (level == 0 || (level == 1 && pamax <= 42)) {
|
|
return false;
|
|
}
|
|
break;
|
|
case 11: /* 16KB Pages. */
|
|
if (level == 0 || (level == 1 && pamax <= 40)) {
|
|
return false;
|
|
}
|
|
break;
|
|
case 9: /* 4KB Pages. */
|
|
if (level == 0 && pamax <= 42) {
|
|
return false;
|
|
}
|
|
break;
|
|
default:
|
|
g_assert_not_reached();
|
|
}
|
|
|
|
/* Inputsize checks. */
|
|
if (inputsize > pamax &&
|
|
(arm_el_is_aa64(env, 1) || inputsize > 40)) {
|
|
/* This is CONSTRAINED UNPREDICTABLE and we choose to fault. */
|
|
return false;
|
|
}
|
|
} else {
|
|
/* AArch32 only supports 4KB pages. Assert on that. */
|
|
assert(stride == 9);
|
|
|
|
if (level == 0) {
|
|
return false;
|
|
}
|
|
}
|
|
return true;
|
|
}
|
|
|
|
/* Translate from the 4-bit stage 2 representation of
|
|
* memory attributes (without cache-allocation hints) to
|
|
* the 8-bit representation of the stage 1 MAIR registers
|
|
* (which includes allocation hints).
|
|
*
|
|
* ref: shared/translation/attrs/S2AttrDecode()
|
|
* .../S2ConvertAttrsHints()
|
|
*/
|
|
static uint8_t convert_stage2_attrs(CPUARMState *env, uint8_t s2attrs)
|
|
{
|
|
uint8_t hiattr = extract32(s2attrs, 2, 2);
|
|
uint8_t loattr = extract32(s2attrs, 0, 2);
|
|
uint8_t hihint = 0, lohint = 0;
|
|
|
|
if (hiattr != 0) { /* normal memory */
|
|
if ((env->cp15.hcr_el2 & HCR_CD) != 0) { /* cache disabled */
|
|
hiattr = loattr = 1; /* non-cacheable */
|
|
} else {
|
|
if (hiattr != 1) { /* Write-through or write-back */
|
|
hihint = 3; /* RW allocate */
|
|
}
|
|
if (loattr != 1) { /* Write-through or write-back */
|
|
lohint = 3; /* RW allocate */
|
|
}
|
|
}
|
|
}
|
|
|
|
return (hiattr << 6) | (hihint << 4) | (loattr << 2) | lohint;
|
|
}
|
|
#endif /* !CONFIG_USER_ONLY */
|
|
|
|
static int aa64_va_parameter_tbi(uint64_t tcr, ARMMMUIdx mmu_idx)
|
|
{
|
|
if (regime_has_2_ranges(mmu_idx)) {
|
|
return extract64(tcr, 37, 2);
|
|
} else if (mmu_idx == ARMMMUIdx_Stage2) {
|
|
return 0; /* VTCR_EL2 */
|
|
} else {
|
|
return extract32(tcr, 20, 1);
|
|
}
|
|
}
|
|
|
|
static int aa64_va_parameter_tbid(uint64_t tcr, ARMMMUIdx mmu_idx)
|
|
{
|
|
if (regime_has_2_ranges(mmu_idx)) {
|
|
return extract64(tcr, 51, 2);
|
|
} else if (mmu_idx == ARMMMUIdx_Stage2) {
|
|
return 0; /* VTCR_EL2 */
|
|
} else {
|
|
return extract32(tcr, 29, 1);
|
|
}
|
|
}
|
|
|
|
ARMVAParameters aa64_va_parameters(CPUARMState *env, uint64_t va,
|
|
ARMMMUIdx mmu_idx, bool data)
|
|
{
|
|
uint64_t tcr = regime_tcr(env, mmu_idx)->raw_tcr;
|
|
bool epd, hpd, using16k, using64k;
|
|
int select, tsz, tbi;
|
|
|
|
if (!regime_has_2_ranges(mmu_idx)) {
|
|
select = 0;
|
|
tsz = extract32(tcr, 0, 6);
|
|
using64k = extract32(tcr, 14, 1);
|
|
using16k = extract32(tcr, 15, 1);
|
|
if (mmu_idx == ARMMMUIdx_Stage2) {
|
|
/* VTCR_EL2 */
|
|
hpd = false;
|
|
} else {
|
|
hpd = extract32(tcr, 24, 1);
|
|
}
|
|
epd = false;
|
|
} else {
|
|
/*
|
|
* Bit 55 is always between the two regions, and is canonical for
|
|
* determining if address tagging is enabled.
|
|
*/
|
|
select = extract64(va, 55, 1);
|
|
if (!select) {
|
|
tsz = extract32(tcr, 0, 6);
|
|
epd = extract32(tcr, 7, 1);
|
|
using64k = extract32(tcr, 14, 1);
|
|
using16k = extract32(tcr, 15, 1);
|
|
hpd = extract64(tcr, 41, 1);
|
|
} else {
|
|
int tg = extract32(tcr, 30, 2);
|
|
using16k = tg == 1;
|
|
using64k = tg == 3;
|
|
tsz = extract32(tcr, 16, 6);
|
|
epd = extract32(tcr, 23, 1);
|
|
hpd = extract64(tcr, 42, 1);
|
|
}
|
|
}
|
|
tsz = MIN(tsz, 39); /* TODO: ARMv8.4-TTST */
|
|
tsz = MAX(tsz, 16); /* TODO: ARMv8.2-LVA */
|
|
|
|
/* Present TBI as a composite with TBID. */
|
|
tbi = aa64_va_parameter_tbi(tcr, mmu_idx);
|
|
if (!data) {
|
|
tbi &= ~aa64_va_parameter_tbid(tcr, mmu_idx);
|
|
}
|
|
tbi = (tbi >> select) & 1;
|
|
|
|
return (ARMVAParameters) {
|
|
.tsz = tsz,
|
|
.select = select,
|
|
.tbi = tbi,
|
|
.epd = epd,
|
|
.hpd = hpd,
|
|
.using16k = using16k,
|
|
.using64k = using64k,
|
|
};
|
|
}
|
|
|
|
#ifndef CONFIG_USER_ONLY
|
|
static ARMVAParameters aa32_va_parameters(CPUARMState *env, uint32_t va,
|
|
ARMMMUIdx mmu_idx)
|
|
{
|
|
uint64_t tcr = regime_tcr(env, mmu_idx)->raw_tcr;
|
|
uint32_t el = regime_el(env, mmu_idx);
|
|
int select, tsz;
|
|
bool epd, hpd;
|
|
|
|
if (mmu_idx == ARMMMUIdx_Stage2) {
|
|
/* VTCR */
|
|
bool sext = extract32(tcr, 4, 1);
|
|
bool sign = extract32(tcr, 3, 1);
|
|
|
|
/*
|
|
* If the sign-extend bit is not the same as t0sz[3], the result
|
|
* is unpredictable. Flag this as a guest error.
|
|
*/
|
|
if (sign != sext) {
|
|
qemu_log_mask(LOG_GUEST_ERROR,
|
|
"AArch32: VTCR.S / VTCR.T0SZ[3] mismatch\n");
|
|
}
|
|
tsz = sextract32(tcr, 0, 4) + 8;
|
|
select = 0;
|
|
hpd = false;
|
|
epd = false;
|
|
} else if (el == 2) {
|
|
/* HTCR */
|
|
tsz = extract32(tcr, 0, 3);
|
|
select = 0;
|
|
hpd = extract64(tcr, 24, 1);
|
|
epd = false;
|
|
} else {
|
|
int t0sz = extract32(tcr, 0, 3);
|
|
int t1sz = extract32(tcr, 16, 3);
|
|
|
|
if (t1sz == 0) {
|
|
select = va > (0xffffffffu >> t0sz);
|
|
} else {
|
|
/* Note that we will detect errors later. */
|
|
select = va >= ~(0xffffffffu >> t1sz);
|
|
}
|
|
if (!select) {
|
|
tsz = t0sz;
|
|
epd = extract32(tcr, 7, 1);
|
|
hpd = extract64(tcr, 41, 1);
|
|
} else {
|
|
tsz = t1sz;
|
|
epd = extract32(tcr, 23, 1);
|
|
hpd = extract64(tcr, 42, 1);
|
|
}
|
|
/* For aarch32, hpd0 is not enabled without t2e as well. */
|
|
hpd &= extract32(tcr, 6, 1);
|
|
}
|
|
|
|
return (ARMVAParameters) {
|
|
.tsz = tsz,
|
|
.select = select,
|
|
.epd = epd,
|
|
.hpd = hpd,
|
|
};
|
|
}
|
|
|
|
static bool get_phys_addr_lpae(CPUARMState *env, target_ulong address,
|
|
MMUAccessType access_type, ARMMMUIdx mmu_idx,
|
|
hwaddr *phys_ptr, MemTxAttrs *txattrs, int *prot,
|
|
target_ulong *page_size_ptr,
|
|
ARMMMUFaultInfo *fi, ARMCacheAttrs *cacheattrs)
|
|
{
|
|
ARMCPU *cpu = env_archcpu(env);
|
|
CPUState *cs = CPU(cpu);
|
|
/* Read an LPAE long-descriptor translation table. */
|
|
ARMFaultType fault_type = ARMFault_Translation;
|
|
uint32_t level;
|
|
ARMVAParameters param;
|
|
uint64_t ttbr;
|
|
hwaddr descaddr, indexmask, indexmask_grainsize;
|
|
uint32_t tableattrs;
|
|
target_ulong page_size;
|
|
uint32_t attrs;
|
|
int32_t stride;
|
|
int addrsize, inputsize;
|
|
TCR *tcr = regime_tcr(env, mmu_idx);
|
|
int ap, ns, xn, pxn;
|
|
uint32_t el = regime_el(env, mmu_idx);
|
|
uint64_t descaddrmask;
|
|
bool aarch64 = arm_el_is_aa64(env, el);
|
|
bool guarded = false;
|
|
|
|
/* TODO:
|
|
* This code does not handle the different format TCR for VTCR_EL2.
|
|
* This code also does not support shareability levels.
|
|
* Attribute and permission bit handling should also be checked when adding
|
|
* support for those page table walks.
|
|
*/
|
|
if (aarch64) {
|
|
param = aa64_va_parameters(env, address, mmu_idx,
|
|
access_type != MMU_INST_FETCH);
|
|
level = 0;
|
|
addrsize = 64 - 8 * param.tbi;
|
|
inputsize = 64 - param.tsz;
|
|
} else {
|
|
param = aa32_va_parameters(env, address, mmu_idx);
|
|
level = 1;
|
|
addrsize = (mmu_idx == ARMMMUIdx_Stage2 ? 40 : 32);
|
|
inputsize = addrsize - param.tsz;
|
|
}
|
|
|
|
/*
|
|
* We determined the region when collecting the parameters, but we
|
|
* have not yet validated that the address is valid for the region.
|
|
* Extract the top bits and verify that they all match select.
|
|
*
|
|
* For aa32, if inputsize == addrsize, then we have selected the
|
|
* region by exclusion in aa32_va_parameters and there is no more
|
|
* validation to do here.
|
|
*/
|
|
if (inputsize < addrsize) {
|
|
target_ulong top_bits = sextract64(address, inputsize,
|
|
addrsize - inputsize);
|
|
if (-top_bits != param.select) {
|
|
/* The gap between the two regions is a Translation fault */
|
|
fault_type = ARMFault_Translation;
|
|
goto do_fault;
|
|
}
|
|
}
|
|
|
|
if (param.using64k) {
|
|
stride = 13;
|
|
} else if (param.using16k) {
|
|
stride = 11;
|
|
} else {
|
|
stride = 9;
|
|
}
|
|
|
|
/* Note that QEMU ignores shareability and cacheability attributes,
|
|
* so we don't need to do anything with the SH, ORGN, IRGN fields
|
|
* in the TTBCR. Similarly, TTBCR:A1 selects whether we get the
|
|
* ASID from TTBR0 or TTBR1, but QEMU's TLB doesn't currently
|
|
* implement any ASID-like capability so we can ignore it (instead
|
|
* we will always flush the TLB any time the ASID is changed).
|
|
*/
|
|
ttbr = regime_ttbr(env, mmu_idx, param.select);
|
|
|
|
/* Here we should have set up all the parameters for the translation:
|
|
* inputsize, ttbr, epd, stride, tbi
|
|
*/
|
|
|
|
if (param.epd) {
|
|
/* Translation table walk disabled => Translation fault on TLB miss
|
|
* Note: This is always 0 on 64-bit EL2 and EL3.
|
|
*/
|
|
goto do_fault;
|
|
}
|
|
|
|
if (mmu_idx != ARMMMUIdx_Stage2) {
|
|
/* The starting level depends on the virtual address size (which can
|
|
* be up to 48 bits) and the translation granule size. It indicates
|
|
* the number of strides (stride bits at a time) needed to
|
|
* consume the bits of the input address. In the pseudocode this is:
|
|
* level = 4 - RoundUp((inputsize - grainsize) / stride)
|
|
* where their 'inputsize' is our 'inputsize', 'grainsize' is
|
|
* our 'stride + 3' and 'stride' is our 'stride'.
|
|
* Applying the usual "rounded up m/n is (m+n-1)/n" and simplifying:
|
|
* = 4 - (inputsize - stride - 3 + stride - 1) / stride
|
|
* = 4 - (inputsize - 4) / stride;
|
|
*/
|
|
level = 4 - (inputsize - 4) / stride;
|
|
} else {
|
|
/* For stage 2 translations the starting level is specified by the
|
|
* VTCR_EL2.SL0 field (whose interpretation depends on the page size)
|
|
*/
|
|
uint32_t sl0 = extract32(tcr->raw_tcr, 6, 2);
|
|
uint32_t startlevel;
|
|
bool ok;
|
|
|
|
if (!aarch64 || stride == 9) {
|
|
/* AArch32 or 4KB pages */
|
|
startlevel = 2 - sl0;
|
|
} else {
|
|
/* 16KB or 64KB pages */
|
|
startlevel = 3 - sl0;
|
|
}
|
|
|
|
/* Check that the starting level is valid. */
|
|
ok = check_s2_mmu_setup(cpu, aarch64, startlevel,
|
|
inputsize, stride);
|
|
if (!ok) {
|
|
fault_type = ARMFault_Translation;
|
|
goto do_fault;
|
|
}
|
|
level = startlevel;
|
|
}
|
|
|
|
indexmask_grainsize = (1ULL << (stride + 3)) - 1;
|
|
indexmask = (1ULL << (inputsize - (stride * (4 - level)))) - 1;
|
|
|
|
/* Now we can extract the actual base address from the TTBR */
|
|
descaddr = extract64(ttbr, 0, 48);
|
|
descaddr &= ~indexmask;
|
|
|
|
/* The address field in the descriptor goes up to bit 39 for ARMv7
|
|
* but up to bit 47 for ARMv8, but we use the descaddrmask
|
|
* up to bit 39 for AArch32, because we don't need other bits in that case
|
|
* to construct next descriptor address (anyway they should be all zeroes).
|
|
*/
|
|
descaddrmask = ((1ull << (aarch64 ? 48 : 40)) - 1) &
|
|
~indexmask_grainsize;
|
|
|
|
/* Secure accesses start with the page table in secure memory and
|
|
* can be downgraded to non-secure at any step. Non-secure accesses
|
|
* remain non-secure. We implement this by just ORing in the NSTable/NS
|
|
* bits at each step.
|
|
*/
|
|
tableattrs = regime_is_secure(env, mmu_idx) ? 0 : (1 << 4);
|
|
for (;;) {
|
|
uint64_t descriptor;
|
|
bool nstable;
|
|
|
|
descaddr |= (address >> (stride * (4 - level))) & indexmask;
|
|
descaddr &= ~7ULL;
|
|
nstable = extract32(tableattrs, 4, 1);
|
|
descriptor = arm_ldq_ptw(cs, descaddr, !nstable, mmu_idx, fi);
|
|
if (fi->type != ARMFault_None) {
|
|
goto do_fault;
|
|
}
|
|
|
|
if (!(descriptor & 1) ||
|
|
(!(descriptor & 2) && (level == 3))) {
|
|
/* Invalid, or the Reserved level 3 encoding */
|
|
goto do_fault;
|
|
}
|
|
descaddr = descriptor & descaddrmask;
|
|
|
|
if ((descriptor & 2) && (level < 3)) {
|
|
/* Table entry. The top five bits are attributes which may
|
|
* propagate down through lower levels of the table (and
|
|
* which are all arranged so that 0 means "no effect", so
|
|
* we can gather them up by ORing in the bits at each level).
|
|
*/
|
|
tableattrs |= extract64(descriptor, 59, 5);
|
|
level++;
|
|
indexmask = indexmask_grainsize;
|
|
continue;
|
|
}
|
|
/* Block entry at level 1 or 2, or page entry at level 3.
|
|
* These are basically the same thing, although the number
|
|
* of bits we pull in from the vaddr varies.
|
|
*/
|
|
page_size = (1ULL << ((stride * (4 - level)) + 3));
|
|
descaddr |= (address & (page_size - 1));
|
|
/* Extract attributes from the descriptor */
|
|
attrs = extract64(descriptor, 2, 10)
|
|
| (extract64(descriptor, 52, 12) << 10);
|
|
|
|
if (mmu_idx == ARMMMUIdx_Stage2) {
|
|
/* Stage 2 table descriptors do not include any attribute fields */
|
|
break;
|
|
}
|
|
/* Merge in attributes from table descriptors */
|
|
attrs |= nstable << 3; /* NS */
|
|
guarded = extract64(descriptor, 50, 1); /* GP */
|
|
if (param.hpd) {
|
|
/* HPD disables all the table attributes except NSTable. */
|
|
break;
|
|
}
|
|
attrs |= extract32(tableattrs, 0, 2) << 11; /* XN, PXN */
|
|
/* The sense of AP[1] vs APTable[0] is reversed, as APTable[0] == 1
|
|
* means "force PL1 access only", which means forcing AP[1] to 0.
|
|
*/
|
|
attrs &= ~(extract32(tableattrs, 2, 1) << 4); /* !APT[0] => AP[1] */
|
|
attrs |= extract32(tableattrs, 3, 1) << 5; /* APT[1] => AP[2] */
|
|
break;
|
|
}
|
|
/* Here descaddr is the final physical address, and attributes
|
|
* are all in attrs.
|
|
*/
|
|
fault_type = ARMFault_AccessFlag;
|
|
if ((attrs & (1 << 8)) == 0) {
|
|
/* Access flag */
|
|
goto do_fault;
|
|
}
|
|
|
|
ap = extract32(attrs, 4, 2);
|
|
xn = extract32(attrs, 12, 1);
|
|
|
|
if (mmu_idx == ARMMMUIdx_Stage2) {
|
|
ns = true;
|
|
*prot = get_S2prot(env, ap, xn);
|
|
} else {
|
|
ns = extract32(attrs, 3, 1);
|
|
pxn = extract32(attrs, 11, 1);
|
|
*prot = get_S1prot(env, mmu_idx, aarch64, ap, ns, xn, pxn);
|
|
}
|
|
|
|
fault_type = ARMFault_Permission;
|
|
if (!(*prot & (1 << access_type))) {
|
|
goto do_fault;
|
|
}
|
|
|
|
if (ns) {
|
|
/* The NS bit will (as required by the architecture) have no effect if
|
|
* the CPU doesn't support TZ or this is a non-secure translation
|
|
* regime, because the attribute will already be non-secure.
|
|
*/
|
|
txattrs->secure = false;
|
|
}
|
|
/* When in aarch64 mode, and BTI is enabled, remember GP in the IOTLB. */
|
|
if (aarch64 && guarded && cpu_isar_feature(aa64_bti, cpu)) {
|
|
txattrs->target_tlb_bit0 = true;
|
|
}
|
|
|
|
if (cacheattrs != NULL) {
|
|
if (mmu_idx == ARMMMUIdx_Stage2) {
|
|
cacheattrs->attrs = convert_stage2_attrs(env,
|
|
extract32(attrs, 0, 4));
|
|
} else {
|
|
/* Index into MAIR registers for cache attributes */
|
|
uint8_t attrindx = extract32(attrs, 0, 3);
|
|
uint64_t mair = env->cp15.mair_el[regime_el(env, mmu_idx)];
|
|
assert(attrindx <= 7);
|
|
cacheattrs->attrs = extract64(mair, attrindx * 8, 8);
|
|
}
|
|
cacheattrs->shareability = extract32(attrs, 6, 2);
|
|
}
|
|
|
|
*phys_ptr = descaddr;
|
|
*page_size_ptr = page_size;
|
|
return false;
|
|
|
|
do_fault:
|
|
fi->type = fault_type;
|
|
fi->level = level;
|
|
/* Tag the error as S2 for failed S1 PTW at S2 or ordinary S2. */
|
|
fi->stage2 = fi->s1ptw || (mmu_idx == ARMMMUIdx_Stage2);
|
|
return true;
|
|
}
|
|
|
|
static inline void get_phys_addr_pmsav7_default(CPUARMState *env,
|
|
ARMMMUIdx mmu_idx,
|
|
int32_t address, int *prot)
|
|
{
|
|
if (!arm_feature(env, ARM_FEATURE_M)) {
|
|
*prot = PAGE_READ | PAGE_WRITE;
|
|
switch (address) {
|
|
case 0xF0000000 ... 0xFFFFFFFF:
|
|
if (regime_sctlr(env, mmu_idx) & SCTLR_V) {
|
|
/* hivecs execing is ok */
|
|
*prot |= PAGE_EXEC;
|
|
}
|
|
break;
|
|
case 0x00000000 ... 0x7FFFFFFF:
|
|
*prot |= PAGE_EXEC;
|
|
break;
|
|
}
|
|
} else {
|
|
/* Default system address map for M profile cores.
|
|
* The architecture specifies which regions are execute-never;
|
|
* at the MPU level no other checks are defined.
|
|
*/
|
|
switch (address) {
|
|
case 0x00000000 ... 0x1fffffff: /* ROM */
|
|
case 0x20000000 ... 0x3fffffff: /* SRAM */
|
|
case 0x60000000 ... 0x7fffffff: /* RAM */
|
|
case 0x80000000 ... 0x9fffffff: /* RAM */
|
|
*prot = PAGE_READ | PAGE_WRITE | PAGE_EXEC;
|
|
break;
|
|
case 0x40000000 ... 0x5fffffff: /* Peripheral */
|
|
case 0xa0000000 ... 0xbfffffff: /* Device */
|
|
case 0xc0000000 ... 0xdfffffff: /* Device */
|
|
case 0xe0000000 ... 0xffffffff: /* System */
|
|
*prot = PAGE_READ | PAGE_WRITE;
|
|
break;
|
|
default:
|
|
g_assert_not_reached();
|
|
}
|
|
}
|
|
}
|
|
|
|
static bool pmsav7_use_background_region(ARMCPU *cpu,
|
|
ARMMMUIdx mmu_idx, bool is_user)
|
|
{
|
|
/* Return true if we should use the default memory map as a
|
|
* "background" region if there are no hits against any MPU regions.
|
|
*/
|
|
CPUARMState *env = &cpu->env;
|
|
|
|
if (is_user) {
|
|
return false;
|
|
}
|
|
|
|
if (arm_feature(env, ARM_FEATURE_M)) {
|
|
return env->v7m.mpu_ctrl[regime_is_secure(env, mmu_idx)]
|
|
& R_V7M_MPU_CTRL_PRIVDEFENA_MASK;
|
|
} else {
|
|
return regime_sctlr(env, mmu_idx) & SCTLR_BR;
|
|
}
|
|
}
|
|
|
|
static inline bool m_is_ppb_region(CPUARMState *env, uint32_t address)
|
|
{
|
|
/* True if address is in the M profile PPB region 0xe0000000 - 0xe00fffff */
|
|
return arm_feature(env, ARM_FEATURE_M) &&
|
|
extract32(address, 20, 12) == 0xe00;
|
|
}
|
|
|
|
static inline bool m_is_system_region(CPUARMState *env, uint32_t address)
|
|
{
|
|
/* True if address is in the M profile system region
|
|
* 0xe0000000 - 0xffffffff
|
|
*/
|
|
return arm_feature(env, ARM_FEATURE_M) && extract32(address, 29, 3) == 0x7;
|
|
}
|
|
|
|
static bool get_phys_addr_pmsav7(CPUARMState *env, uint32_t address,
|
|
MMUAccessType access_type, ARMMMUIdx mmu_idx,
|
|
hwaddr *phys_ptr, int *prot,
|
|
target_ulong *page_size,
|
|
ARMMMUFaultInfo *fi)
|
|
{
|
|
ARMCPU *cpu = env_archcpu(env);
|
|
int n;
|
|
bool is_user = regime_is_user(env, mmu_idx);
|
|
|
|
*phys_ptr = address;
|
|
*page_size = TARGET_PAGE_SIZE;
|
|
*prot = 0;
|
|
|
|
if (regime_translation_disabled(env, mmu_idx) ||
|
|
m_is_ppb_region(env, address)) {
|
|
/* MPU disabled or M profile PPB access: use default memory map.
|
|
* The other case which uses the default memory map in the
|
|
* v7M ARM ARM pseudocode is exception vector reads from the vector
|
|
* table. In QEMU those accesses are done in arm_v7m_load_vector(),
|
|
* which always does a direct read using address_space_ldl(), rather
|
|
* than going via this function, so we don't need to check that here.
|
|
*/
|
|
get_phys_addr_pmsav7_default(env, mmu_idx, address, prot);
|
|
} else { /* MPU enabled */
|
|
for (n = (int)cpu->pmsav7_dregion - 1; n >= 0; n--) {
|
|
/* region search */
|
|
uint32_t base = env->pmsav7.drbar[n];
|
|
uint32_t rsize = extract32(env->pmsav7.drsr[n], 1, 5);
|
|
uint32_t rmask;
|
|
bool srdis = false;
|
|
|
|
if (!(env->pmsav7.drsr[n] & 0x1)) {
|
|
continue;
|
|
}
|
|
|
|
if (!rsize) {
|
|
qemu_log_mask(LOG_GUEST_ERROR,
|
|
"DRSR[%d]: Rsize field cannot be 0\n", n);
|
|
continue;
|
|
}
|
|
rsize++;
|
|
rmask = (1ull << rsize) - 1;
|
|
|
|
if (base & rmask) {
|
|
qemu_log_mask(LOG_GUEST_ERROR,
|
|
"DRBAR[%d]: 0x%" PRIx32 " misaligned "
|
|
"to DRSR region size, mask = 0x%" PRIx32 "\n",
|
|
n, base, rmask);
|
|
continue;
|
|
}
|
|
|
|
if (address < base || address > base + rmask) {
|
|
/*
|
|
* Address not in this region. We must check whether the
|
|
* region covers addresses in the same page as our address.
|
|
* In that case we must not report a size that covers the
|
|
* whole page for a subsequent hit against a different MPU
|
|
* region or the background region, because it would result in
|
|
* incorrect TLB hits for subsequent accesses to addresses that
|
|
* are in this MPU region.
|
|
*/
|
|
if (ranges_overlap(base, rmask,
|
|
address & TARGET_PAGE_MASK,
|
|
TARGET_PAGE_SIZE)) {
|
|
*page_size = 1;
|
|
}
|
|
continue;
|
|
}
|
|
|
|
/* Region matched */
|
|
|
|
if (rsize >= 8) { /* no subregions for regions < 256 bytes */
|
|
int i, snd;
|
|
uint32_t srdis_mask;
|
|
|
|
rsize -= 3; /* sub region size (power of 2) */
|
|
snd = ((address - base) >> rsize) & 0x7;
|
|
srdis = extract32(env->pmsav7.drsr[n], snd + 8, 1);
|
|
|
|
srdis_mask = srdis ? 0x3 : 0x0;
|
|
for (i = 2; i <= 8 && rsize < TARGET_PAGE_BITS; i *= 2) {
|
|
/* This will check in groups of 2, 4 and then 8, whether
|
|
* the subregion bits are consistent. rsize is incremented
|
|
* back up to give the region size, considering consistent
|
|
* adjacent subregions as one region. Stop testing if rsize
|
|
* is already big enough for an entire QEMU page.
|
|
*/
|
|
int snd_rounded = snd & ~(i - 1);
|
|
uint32_t srdis_multi = extract32(env->pmsav7.drsr[n],
|
|
snd_rounded + 8, i);
|
|
if (srdis_mask ^ srdis_multi) {
|
|
break;
|
|
}
|
|
srdis_mask = (srdis_mask << i) | srdis_mask;
|
|
rsize++;
|
|
}
|
|
}
|
|
if (srdis) {
|
|
continue;
|
|
}
|
|
if (rsize < TARGET_PAGE_BITS) {
|
|
*page_size = 1 << rsize;
|
|
}
|
|
break;
|
|
}
|
|
|
|
if (n == -1) { /* no hits */
|
|
if (!pmsav7_use_background_region(cpu, mmu_idx, is_user)) {
|
|
/* background fault */
|
|
fi->type = ARMFault_Background;
|
|
return true;
|
|
}
|
|
get_phys_addr_pmsav7_default(env, mmu_idx, address, prot);
|
|
} else { /* a MPU hit! */
|
|
uint32_t ap = extract32(env->pmsav7.dracr[n], 8, 3);
|
|
uint32_t xn = extract32(env->pmsav7.dracr[n], 12, 1);
|
|
|
|
if (m_is_system_region(env, address)) {
|
|
/* System space is always execute never */
|
|
xn = 1;
|
|
}
|
|
|
|
if (is_user) { /* User mode AP bit decoding */
|
|
switch (ap) {
|
|
case 0:
|
|
case 1:
|
|
case 5:
|
|
break; /* no access */
|
|
case 3:
|
|
*prot |= PAGE_WRITE;
|
|
/* fall through */
|
|
case 2:
|
|
case 6:
|
|
*prot |= PAGE_READ | PAGE_EXEC;
|
|
break;
|
|
case 7:
|
|
/* for v7M, same as 6; for R profile a reserved value */
|
|
if (arm_feature(env, ARM_FEATURE_M)) {
|
|
*prot |= PAGE_READ | PAGE_EXEC;
|
|
break;
|
|
}
|
|
/* fall through */
|
|
default:
|
|
qemu_log_mask(LOG_GUEST_ERROR,
|
|
"DRACR[%d]: Bad value for AP bits: 0x%"
|
|
PRIx32 "\n", n, ap);
|
|
}
|
|
} else { /* Priv. mode AP bits decoding */
|
|
switch (ap) {
|
|
case 0:
|
|
break; /* no access */
|
|
case 1:
|
|
case 2:
|
|
case 3:
|
|
*prot |= PAGE_WRITE;
|
|
/* fall through */
|
|
case 5:
|
|
case 6:
|
|
*prot |= PAGE_READ | PAGE_EXEC;
|
|
break;
|
|
case 7:
|
|
/* for v7M, same as 6; for R profile a reserved value */
|
|
if (arm_feature(env, ARM_FEATURE_M)) {
|
|
*prot |= PAGE_READ | PAGE_EXEC;
|
|
break;
|
|
}
|
|
/* fall through */
|
|
default:
|
|
qemu_log_mask(LOG_GUEST_ERROR,
|
|
"DRACR[%d]: Bad value for AP bits: 0x%"
|
|
PRIx32 "\n", n, ap);
|
|
}
|
|
}
|
|
|
|
/* execute never */
|
|
if (xn) {
|
|
*prot &= ~PAGE_EXEC;
|
|
}
|
|
}
|
|
}
|
|
|
|
fi->type = ARMFault_Permission;
|
|
fi->level = 1;
|
|
return !(*prot & (1 << access_type));
|
|
}
|
|
|
|
static bool v8m_is_sau_exempt(CPUARMState *env,
|
|
uint32_t address, MMUAccessType access_type)
|
|
{
|
|
/* The architecture specifies that certain address ranges are
|
|
* exempt from v8M SAU/IDAU checks.
|
|
*/
|
|
return
|
|
(access_type == MMU_INST_FETCH && m_is_system_region(env, address)) ||
|
|
(address >= 0xe0000000 && address <= 0xe0002fff) ||
|
|
(address >= 0xe000e000 && address <= 0xe000efff) ||
|
|
(address >= 0xe002e000 && address <= 0xe002efff) ||
|
|
(address >= 0xe0040000 && address <= 0xe0041fff) ||
|
|
(address >= 0xe00ff000 && address <= 0xe00fffff);
|
|
}
|
|
|
|
void v8m_security_lookup(CPUARMState *env, uint32_t address,
|
|
MMUAccessType access_type, ARMMMUIdx mmu_idx,
|
|
V8M_SAttributes *sattrs)
|
|
{
|
|
/* Look up the security attributes for this address. Compare the
|
|
* pseudocode SecurityCheck() function.
|
|
* We assume the caller has zero-initialized *sattrs.
|
|
*/
|
|
ARMCPU *cpu = env_archcpu(env);
|
|
int r;
|
|
bool idau_exempt = false, idau_ns = true, idau_nsc = true;
|
|
int idau_region = IREGION_NOTVALID;
|
|
uint32_t addr_page_base = address & TARGET_PAGE_MASK;
|
|
uint32_t addr_page_limit = addr_page_base + (TARGET_PAGE_SIZE - 1);
|
|
|
|
if (cpu->idau) {
|
|
IDAUInterfaceClass *iic = IDAU_INTERFACE_GET_CLASS(cpu->idau);
|
|
IDAUInterface *ii = IDAU_INTERFACE(cpu->idau);
|
|
|
|
iic->check(ii, address, &idau_region, &idau_exempt, &idau_ns,
|
|
&idau_nsc);
|
|
}
|
|
|
|
if (access_type == MMU_INST_FETCH && extract32(address, 28, 4) == 0xf) {
|
|
/* 0xf0000000..0xffffffff is always S for insn fetches */
|
|
return;
|
|
}
|
|
|
|
if (idau_exempt || v8m_is_sau_exempt(env, address, access_type)) {
|
|
sattrs->ns = !regime_is_secure(env, mmu_idx);
|
|
return;
|
|
}
|
|
|
|
if (idau_region != IREGION_NOTVALID) {
|
|
sattrs->irvalid = true;
|
|
sattrs->iregion = idau_region;
|
|
}
|
|
|
|
switch (env->sau.ctrl & 3) {
|
|
case 0: /* SAU.ENABLE == 0, SAU.ALLNS == 0 */
|
|
break;
|
|
case 2: /* SAU.ENABLE == 0, SAU.ALLNS == 1 */
|
|
sattrs->ns = true;
|
|
break;
|
|
default: /* SAU.ENABLE == 1 */
|
|
for (r = 0; r < cpu->sau_sregion; r++) {
|
|
if (env->sau.rlar[r] & 1) {
|
|
uint32_t base = env->sau.rbar[r] & ~0x1f;
|
|
uint32_t limit = env->sau.rlar[r] | 0x1f;
|
|
|
|
if (base <= address && limit >= address) {
|
|
if (base > addr_page_base || limit < addr_page_limit) {
|
|
sattrs->subpage = true;
|
|
}
|
|
if (sattrs->srvalid) {
|
|
/* If we hit in more than one region then we must report
|
|
* as Secure, not NS-Callable, with no valid region
|
|
* number info.
|
|
*/
|
|
sattrs->ns = false;
|
|
sattrs->nsc = false;
|
|
sattrs->sregion = 0;
|
|
sattrs->srvalid = false;
|
|
break;
|
|
} else {
|
|
if (env->sau.rlar[r] & 2) {
|
|
sattrs->nsc = true;
|
|
} else {
|
|
sattrs->ns = true;
|
|
}
|
|
sattrs->srvalid = true;
|
|
sattrs->sregion = r;
|
|
}
|
|
} else {
|
|
/*
|
|
* Address not in this region. We must check whether the
|
|
* region covers addresses in the same page as our address.
|
|
* In that case we must not report a size that covers the
|
|
* whole page for a subsequent hit against a different MPU
|
|
* region or the background region, because it would result
|
|
* in incorrect TLB hits for subsequent accesses to
|
|
* addresses that are in this MPU region.
|
|
*/
|
|
if (limit >= base &&
|
|
ranges_overlap(base, limit - base + 1,
|
|
addr_page_base,
|
|
TARGET_PAGE_SIZE)) {
|
|
sattrs->subpage = true;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
break;
|
|
}
|
|
|
|
/*
|
|
* The IDAU will override the SAU lookup results if it specifies
|
|
* higher security than the SAU does.
|
|
*/
|
|
if (!idau_ns) {
|
|
if (sattrs->ns || (!idau_nsc && sattrs->nsc)) {
|
|
sattrs->ns = false;
|
|
sattrs->nsc = idau_nsc;
|
|
}
|
|
}
|
|
}
|
|
|
|
bool pmsav8_mpu_lookup(CPUARMState *env, uint32_t address,
|
|
MMUAccessType access_type, ARMMMUIdx mmu_idx,
|
|
hwaddr *phys_ptr, MemTxAttrs *txattrs,
|
|
int *prot, bool *is_subpage,
|
|
ARMMMUFaultInfo *fi, uint32_t *mregion)
|
|
{
|
|
/* Perform a PMSAv8 MPU lookup (without also doing the SAU check
|
|
* that a full phys-to-virt translation does).
|
|
* mregion is (if not NULL) set to the region number which matched,
|
|
* or -1 if no region number is returned (MPU off, address did not
|
|
* hit a region, address hit in multiple regions).
|
|
* We set is_subpage to true if the region hit doesn't cover the
|
|
* entire TARGET_PAGE the address is within.
|
|
*/
|
|
ARMCPU *cpu = env_archcpu(env);
|
|
bool is_user = regime_is_user(env, mmu_idx);
|
|
uint32_t secure = regime_is_secure(env, mmu_idx);
|
|
int n;
|
|
int matchregion = -1;
|
|
bool hit = false;
|
|
uint32_t addr_page_base = address & TARGET_PAGE_MASK;
|
|
uint32_t addr_page_limit = addr_page_base + (TARGET_PAGE_SIZE - 1);
|
|
|
|
*is_subpage = false;
|
|
*phys_ptr = address;
|
|
*prot = 0;
|
|
if (mregion) {
|
|
*mregion = -1;
|
|
}
|
|
|
|
/* Unlike the ARM ARM pseudocode, we don't need to check whether this
|
|
* was an exception vector read from the vector table (which is always
|
|
* done using the default system address map), because those accesses
|
|
* are done in arm_v7m_load_vector(), which always does a direct
|
|
* read using address_space_ldl(), rather than going via this function.
|
|
*/
|
|
if (regime_translation_disabled(env, mmu_idx)) { /* MPU disabled */
|
|
hit = true;
|
|
} else if (m_is_ppb_region(env, address)) {
|
|
hit = true;
|
|
} else {
|
|
if (pmsav7_use_background_region(cpu, mmu_idx, is_user)) {
|
|
hit = true;
|
|
}
|
|
|
|
for (n = (int)cpu->pmsav7_dregion - 1; n >= 0; n--) {
|
|
/* region search */
|
|
/* Note that the base address is bits [31:5] from the register
|
|
* with bits [4:0] all zeroes, but the limit address is bits
|
|
* [31:5] from the register with bits [4:0] all ones.
|
|
*/
|
|
uint32_t base = env->pmsav8.rbar[secure][n] & ~0x1f;
|
|
uint32_t limit = env->pmsav8.rlar[secure][n] | 0x1f;
|
|
|
|
if (!(env->pmsav8.rlar[secure][n] & 0x1)) {
|
|
/* Region disabled */
|
|
continue;
|
|
}
|
|
|
|
if (address < base || address > limit) {
|
|
/*
|
|
* Address not in this region. We must check whether the
|
|
* region covers addresses in the same page as our address.
|
|
* In that case we must not report a size that covers the
|
|
* whole page for a subsequent hit against a different MPU
|
|
* region or the background region, because it would result in
|
|
* incorrect TLB hits for subsequent accesses to addresses that
|
|
* are in this MPU region.
|
|
*/
|
|
if (limit >= base &&
|
|
ranges_overlap(base, limit - base + 1,
|
|
addr_page_base,
|
|
TARGET_PAGE_SIZE)) {
|
|
*is_subpage = true;
|
|
}
|
|
continue;
|
|
}
|
|
|
|
if (base > addr_page_base || limit < addr_page_limit) {
|
|
*is_subpage = true;
|
|
}
|
|
|
|
if (matchregion != -1) {
|
|
/* Multiple regions match -- always a failure (unlike
|
|
* PMSAv7 where highest-numbered-region wins)
|
|
*/
|
|
fi->type = ARMFault_Permission;
|
|
fi->level = 1;
|
|
return true;
|
|
}
|
|
|
|
matchregion = n;
|
|
hit = true;
|
|
}
|
|
}
|
|
|
|
if (!hit) {
|
|
/* background fault */
|
|
fi->type = ARMFault_Background;
|
|
return true;
|
|
}
|
|
|
|
if (matchregion == -1) {
|
|
/* hit using the background region */
|
|
get_phys_addr_pmsav7_default(env, mmu_idx, address, prot);
|
|
} else {
|
|
uint32_t ap = extract32(env->pmsav8.rbar[secure][matchregion], 1, 2);
|
|
uint32_t xn = extract32(env->pmsav8.rbar[secure][matchregion], 0, 1);
|
|
|
|
if (m_is_system_region(env, address)) {
|
|
/* System space is always execute never */
|
|
xn = 1;
|
|
}
|
|
|
|
*prot = simple_ap_to_rw_prot(env, mmu_idx, ap);
|
|
if (*prot && !xn) {
|
|
*prot |= PAGE_EXEC;
|
|
}
|
|
/* We don't need to look the attribute up in the MAIR0/MAIR1
|
|
* registers because that only tells us about cacheability.
|
|
*/
|
|
if (mregion) {
|
|
*mregion = matchregion;
|
|
}
|
|
}
|
|
|
|
fi->type = ARMFault_Permission;
|
|
fi->level = 1;
|
|
return !(*prot & (1 << access_type));
|
|
}
|
|
|
|
|
|
static bool get_phys_addr_pmsav8(CPUARMState *env, uint32_t address,
|
|
MMUAccessType access_type, ARMMMUIdx mmu_idx,
|
|
hwaddr *phys_ptr, MemTxAttrs *txattrs,
|
|
int *prot, target_ulong *page_size,
|
|
ARMMMUFaultInfo *fi)
|
|
{
|
|
uint32_t secure = regime_is_secure(env, mmu_idx);
|
|
V8M_SAttributes sattrs = {};
|
|
bool ret;
|
|
bool mpu_is_subpage;
|
|
|
|
if (arm_feature(env, ARM_FEATURE_M_SECURITY)) {
|
|
v8m_security_lookup(env, address, access_type, mmu_idx, &sattrs);
|
|
if (access_type == MMU_INST_FETCH) {
|
|
/* Instruction fetches always use the MMU bank and the
|
|
* transaction attribute determined by the fetch address,
|
|
* regardless of CPU state. This is painful for QEMU
|
|
* to handle, because it would mean we need to encode
|
|
* into the mmu_idx not just the (user, negpri) information
|
|
* for the current security state but also that for the
|
|
* other security state, which would balloon the number
|
|
* of mmu_idx values needed alarmingly.
|
|
* Fortunately we can avoid this because it's not actually
|
|
* possible to arbitrarily execute code from memory with
|
|
* the wrong security attribute: it will always generate
|
|
* an exception of some kind or another, apart from the
|
|
* special case of an NS CPU executing an SG instruction
|
|
* in S&NSC memory. So we always just fail the translation
|
|
* here and sort things out in the exception handler
|
|
* (including possibly emulating an SG instruction).
|
|
*/
|
|
if (sattrs.ns != !secure) {
|
|
if (sattrs.nsc) {
|
|
fi->type = ARMFault_QEMU_NSCExec;
|
|
} else {
|
|
fi->type = ARMFault_QEMU_SFault;
|
|
}
|
|
*page_size = sattrs.subpage ? 1 : TARGET_PAGE_SIZE;
|
|
*phys_ptr = address;
|
|
*prot = 0;
|
|
return true;
|
|
}
|
|
} else {
|
|
/* For data accesses we always use the MMU bank indicated
|
|
* by the current CPU state, but the security attributes
|
|
* might downgrade a secure access to nonsecure.
|
|
*/
|
|
if (sattrs.ns) {
|
|
txattrs->secure = false;
|
|
} else if (!secure) {
|
|
/* NS access to S memory must fault.
|
|
* Architecturally we should first check whether the
|
|
* MPU information for this address indicates that we
|
|
* are doing an unaligned access to Device memory, which
|
|
* should generate a UsageFault instead. QEMU does not
|
|
* currently check for that kind of unaligned access though.
|
|
* If we added it we would need to do so as a special case
|
|
* for M_FAKE_FSR_SFAULT in arm_v7m_cpu_do_interrupt().
|
|
*/
|
|
fi->type = ARMFault_QEMU_SFault;
|
|
*page_size = sattrs.subpage ? 1 : TARGET_PAGE_SIZE;
|
|
*phys_ptr = address;
|
|
*prot = 0;
|
|
return true;
|
|
}
|
|
}
|
|
}
|
|
|
|
ret = pmsav8_mpu_lookup(env, address, access_type, mmu_idx, phys_ptr,
|
|
txattrs, prot, &mpu_is_subpage, fi, NULL);
|
|
*page_size = sattrs.subpage || mpu_is_subpage ? 1 : TARGET_PAGE_SIZE;
|
|
return ret;
|
|
}
|
|
|
|
static bool get_phys_addr_pmsav5(CPUARMState *env, uint32_t address,
|
|
MMUAccessType access_type, ARMMMUIdx mmu_idx,
|
|
hwaddr *phys_ptr, int *prot,
|
|
ARMMMUFaultInfo *fi)
|
|
{
|
|
int n;
|
|
uint32_t mask;
|
|
uint32_t base;
|
|
bool is_user = regime_is_user(env, mmu_idx);
|
|
|
|
if (regime_translation_disabled(env, mmu_idx)) {
|
|
/* MPU disabled. */
|
|
*phys_ptr = address;
|
|
*prot = PAGE_READ | PAGE_WRITE | PAGE_EXEC;
|
|
return false;
|
|
}
|
|
|
|
*phys_ptr = address;
|
|
for (n = 7; n >= 0; n--) {
|
|
base = env->cp15.c6_region[n];
|
|
if ((base & 1) == 0) {
|
|
continue;
|
|
}
|
|
mask = 1 << ((base >> 1) & 0x1f);
|
|
/* Keep this shift separate from the above to avoid an
|
|
(undefined) << 32. */
|
|
mask = (mask << 1) - 1;
|
|
if (((base ^ address) & ~mask) == 0) {
|
|
break;
|
|
}
|
|
}
|
|
if (n < 0) {
|
|
fi->type = ARMFault_Background;
|
|
return true;
|
|
}
|
|
|
|
if (access_type == MMU_INST_FETCH) {
|
|
mask = env->cp15.pmsav5_insn_ap;
|
|
} else {
|
|
mask = env->cp15.pmsav5_data_ap;
|
|
}
|
|
mask = (mask >> (n * 4)) & 0xf;
|
|
switch (mask) {
|
|
case 0:
|
|
fi->type = ARMFault_Permission;
|
|
fi->level = 1;
|
|
return true;
|
|
case 1:
|
|
if (is_user) {
|
|
fi->type = ARMFault_Permission;
|
|
fi->level = 1;
|
|
return true;
|
|
}
|
|
*prot = PAGE_READ | PAGE_WRITE;
|
|
break;
|
|
case 2:
|
|
*prot = PAGE_READ;
|
|
if (!is_user) {
|
|
*prot |= PAGE_WRITE;
|
|
}
|
|
break;
|
|
case 3:
|
|
*prot = PAGE_READ | PAGE_WRITE;
|
|
break;
|
|
case 5:
|
|
if (is_user) {
|
|
fi->type = ARMFault_Permission;
|
|
fi->level = 1;
|
|
return true;
|
|
}
|
|
*prot = PAGE_READ;
|
|
break;
|
|
case 6:
|
|
*prot = PAGE_READ;
|
|
break;
|
|
default:
|
|
/* Bad permission. */
|
|
fi->type = ARMFault_Permission;
|
|
fi->level = 1;
|
|
return true;
|
|
}
|
|
*prot |= PAGE_EXEC;
|
|
return false;
|
|
}
|
|
|
|
/* Combine either inner or outer cacheability attributes for normal
|
|
* memory, according to table D4-42 and pseudocode procedure
|
|
* CombineS1S2AttrHints() of ARM DDI 0487B.b (the ARMv8 ARM).
|
|
*
|
|
* NB: only stage 1 includes allocation hints (RW bits), leading to
|
|
* some asymmetry.
|
|
*/
|
|
static uint8_t combine_cacheattr_nibble(uint8_t s1, uint8_t s2)
|
|
{
|
|
if (s1 == 4 || s2 == 4) {
|
|
/* non-cacheable has precedence */
|
|
return 4;
|
|
} else if (extract32(s1, 2, 2) == 0 || extract32(s1, 2, 2) == 2) {
|
|
/* stage 1 write-through takes precedence */
|
|
return s1;
|
|
} else if (extract32(s2, 2, 2) == 2) {
|
|
/* stage 2 write-through takes precedence, but the allocation hint
|
|
* is still taken from stage 1
|
|
*/
|
|
return (2 << 2) | extract32(s1, 0, 2);
|
|
} else { /* write-back */
|
|
return s1;
|
|
}
|
|
}
|
|
|
|
/* Combine S1 and S2 cacheability/shareability attributes, per D4.5.4
|
|
* and CombineS1S2Desc()
|
|
*
|
|
* @s1: Attributes from stage 1 walk
|
|
* @s2: Attributes from stage 2 walk
|
|
*/
|
|
static ARMCacheAttrs combine_cacheattrs(ARMCacheAttrs s1, ARMCacheAttrs s2)
|
|
{
|
|
uint8_t s1lo = extract32(s1.attrs, 0, 4), s2lo = extract32(s2.attrs, 0, 4);
|
|
uint8_t s1hi = extract32(s1.attrs, 4, 4), s2hi = extract32(s2.attrs, 4, 4);
|
|
ARMCacheAttrs ret;
|
|
|
|
/* Combine shareability attributes (table D4-43) */
|
|
if (s1.shareability == 2 || s2.shareability == 2) {
|
|
/* if either are outer-shareable, the result is outer-shareable */
|
|
ret.shareability = 2;
|
|
} else if (s1.shareability == 3 || s2.shareability == 3) {
|
|
/* if either are inner-shareable, the result is inner-shareable */
|
|
ret.shareability = 3;
|
|
} else {
|
|
/* both non-shareable */
|
|
ret.shareability = 0;
|
|
}
|
|
|
|
/* Combine memory type and cacheability attributes */
|
|
if (s1hi == 0 || s2hi == 0) {
|
|
/* Device has precedence over normal */
|
|
if (s1lo == 0 || s2lo == 0) {
|
|
/* nGnRnE has precedence over anything */
|
|
ret.attrs = 0;
|
|
} else if (s1lo == 4 || s2lo == 4) {
|
|
/* non-Reordering has precedence over Reordering */
|
|
ret.attrs = 4; /* nGnRE */
|
|
} else if (s1lo == 8 || s2lo == 8) {
|
|
/* non-Gathering has precedence over Gathering */
|
|
ret.attrs = 8; /* nGRE */
|
|
} else {
|
|
ret.attrs = 0xc; /* GRE */
|
|
}
|
|
|
|
/* Any location for which the resultant memory type is any
|
|
* type of Device memory is always treated as Outer Shareable.
|
|
*/
|
|
ret.shareability = 2;
|
|
} else { /* Normal memory */
|
|
/* Outer/inner cacheability combine independently */
|
|
ret.attrs = combine_cacheattr_nibble(s1hi, s2hi) << 4
|
|
| combine_cacheattr_nibble(s1lo, s2lo);
|
|
|
|
if (ret.attrs == 0x44) {
|
|
/* Any location for which the resultant memory type is Normal
|
|
* Inner Non-cacheable, Outer Non-cacheable is always treated
|
|
* as Outer Shareable.
|
|
*/
|
|
ret.shareability = 2;
|
|
}
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
|
|
/* get_phys_addr - get the physical address for this virtual address
|
|
*
|
|
* Find the physical address corresponding to the given virtual address,
|
|
* by doing a translation table walk on MMU based systems or using the
|
|
* MPU state on MPU based systems.
|
|
*
|
|
* Returns false if the translation was successful. Otherwise, phys_ptr, attrs,
|
|
* prot and page_size may not be filled in, and the populated fsr value provides
|
|
* information on why the translation aborted, in the format of a
|
|
* DFSR/IFSR fault register, with the following caveats:
|
|
* * we honour the short vs long DFSR format differences.
|
|
* * the WnR bit is never set (the caller must do this).
|
|
* * for PSMAv5 based systems we don't bother to return a full FSR format
|
|
* value.
|
|
*
|
|
* @env: CPUARMState
|
|
* @address: virtual address to get physical address for
|
|
* @access_type: 0 for read, 1 for write, 2 for execute
|
|
* @mmu_idx: MMU index indicating required translation regime
|
|
* @phys_ptr: set to the physical address corresponding to the virtual address
|
|
* @attrs: set to the memory transaction attributes to use
|
|
* @prot: set to the permissions for the page containing phys_ptr
|
|
* @page_size: set to the size of the page containing phys_ptr
|
|
* @fi: set to fault info if the translation fails
|
|
* @cacheattrs: (if non-NULL) set to the cacheability/shareability attributes
|
|
*/
|
|
bool get_phys_addr(CPUARMState *env, target_ulong address,
|
|
MMUAccessType access_type, ARMMMUIdx mmu_idx,
|
|
hwaddr *phys_ptr, MemTxAttrs *attrs, int *prot,
|
|
target_ulong *page_size,
|
|
ARMMMUFaultInfo *fi, ARMCacheAttrs *cacheattrs)
|
|
{
|
|
if (mmu_idx == ARMMMUIdx_E10_0 ||
|
|
mmu_idx == ARMMMUIdx_E10_1 ||
|
|
mmu_idx == ARMMMUIdx_E10_1_PAN) {
|
|
/* Call ourselves recursively to do the stage 1 and then stage 2
|
|
* translations.
|
|
*/
|
|
if (arm_feature(env, ARM_FEATURE_EL2)) {
|
|
hwaddr ipa;
|
|
int s2_prot;
|
|
int ret;
|
|
ARMCacheAttrs cacheattrs2 = {};
|
|
|
|
ret = get_phys_addr(env, address, access_type,
|
|
stage_1_mmu_idx(mmu_idx), &ipa, attrs,
|
|
prot, page_size, fi, cacheattrs);
|
|
|
|
/* If S1 fails or S2 is disabled, return early. */
|
|
if (ret || regime_translation_disabled(env, ARMMMUIdx_Stage2)) {
|
|
*phys_ptr = ipa;
|
|
return ret;
|
|
}
|
|
|
|
/* S1 is done. Now do S2 translation. */
|
|
ret = get_phys_addr_lpae(env, ipa, access_type, ARMMMUIdx_Stage2,
|
|
phys_ptr, attrs, &s2_prot,
|
|
page_size, fi,
|
|
cacheattrs != NULL ? &cacheattrs2 : NULL);
|
|
fi->s2addr = ipa;
|
|
/* Combine the S1 and S2 perms. */
|
|
*prot &= s2_prot;
|
|
|
|
/* Combine the S1 and S2 cache attributes, if needed */
|
|
if (!ret && cacheattrs != NULL) {
|
|
if (env->cp15.hcr_el2 & HCR_DC) {
|
|
/*
|
|
* HCR.DC forces the first stage attributes to
|
|
* Normal Non-Shareable,
|
|
* Inner Write-Back Read-Allocate Write-Allocate,
|
|
* Outer Write-Back Read-Allocate Write-Allocate.
|
|
*/
|
|
cacheattrs->attrs = 0xff;
|
|
cacheattrs->shareability = 0;
|
|
}
|
|
*cacheattrs = combine_cacheattrs(*cacheattrs, cacheattrs2);
|
|
}
|
|
|
|
return ret;
|
|
} else {
|
|
/*
|
|
* For non-EL2 CPUs a stage1+stage2 translation is just stage 1.
|
|
*/
|
|
mmu_idx = stage_1_mmu_idx(mmu_idx);
|
|
}
|
|
}
|
|
|
|
/* The page table entries may downgrade secure to non-secure, but
|
|
* cannot upgrade an non-secure translation regime's attributes
|
|
* to secure.
|
|
*/
|
|
attrs->secure = regime_is_secure(env, mmu_idx);
|
|
attrs->user = regime_is_user(env, mmu_idx);
|
|
|
|
/* Fast Context Switch Extension. This doesn't exist at all in v8.
|
|
* In v7 and earlier it affects all stage 1 translations.
|
|
*/
|
|
if (address < 0x02000000 && mmu_idx != ARMMMUIdx_Stage2
|
|
&& !arm_feature(env, ARM_FEATURE_V8)) {
|
|
if (regime_el(env, mmu_idx) == 3) {
|
|
address += env->cp15.fcseidr_s;
|
|
} else {
|
|
address += env->cp15.fcseidr_ns;
|
|
}
|
|
}
|
|
|
|
if (arm_feature(env, ARM_FEATURE_PMSA)) {
|
|
bool ret;
|
|
*page_size = TARGET_PAGE_SIZE;
|
|
|
|
if (arm_feature(env, ARM_FEATURE_V8)) {
|
|
/* PMSAv8 */
|
|
ret = get_phys_addr_pmsav8(env, address, access_type, mmu_idx,
|
|
phys_ptr, attrs, prot, page_size, fi);
|
|
} else if (arm_feature(env, ARM_FEATURE_V7)) {
|
|
/* PMSAv7 */
|
|
ret = get_phys_addr_pmsav7(env, address, access_type, mmu_idx,
|
|
phys_ptr, prot, page_size, fi);
|
|
} else {
|
|
/* Pre-v7 MPU */
|
|
ret = get_phys_addr_pmsav5(env, address, access_type, mmu_idx,
|
|
phys_ptr, prot, fi);
|
|
}
|
|
qemu_log_mask(CPU_LOG_MMU, "PMSA MPU lookup for %s at 0x%08" PRIx32
|
|
" mmu_idx %u -> %s (prot %c%c%c)\n",
|
|
access_type == MMU_DATA_LOAD ? "reading" :
|
|
(access_type == MMU_DATA_STORE ? "writing" : "execute"),
|
|
(uint32_t)address, mmu_idx,
|
|
ret ? "Miss" : "Hit",
|
|
*prot & PAGE_READ ? 'r' : '-',
|
|
*prot & PAGE_WRITE ? 'w' : '-',
|
|
*prot & PAGE_EXEC ? 'x' : '-');
|
|
|
|
return ret;
|
|
}
|
|
|
|
/* Definitely a real MMU, not an MPU */
|
|
|
|
if (regime_translation_disabled(env, mmu_idx)) {
|
|
/* MMU disabled. */
|
|
*phys_ptr = address;
|
|
*prot = PAGE_READ | PAGE_WRITE | PAGE_EXEC;
|
|
*page_size = TARGET_PAGE_SIZE;
|
|
return 0;
|
|
}
|
|
|
|
if (regime_using_lpae_format(env, mmu_idx)) {
|
|
return get_phys_addr_lpae(env, address, access_type, mmu_idx,
|
|
phys_ptr, attrs, prot, page_size,
|
|
fi, cacheattrs);
|
|
} else if (regime_sctlr(env, mmu_idx) & SCTLR_XP) {
|
|
return get_phys_addr_v6(env, address, access_type, mmu_idx,
|
|
phys_ptr, attrs, prot, page_size, fi);
|
|
} else {
|
|
return get_phys_addr_v5(env, address, access_type, mmu_idx,
|
|
phys_ptr, prot, page_size, fi);
|
|
}
|
|
}
|
|
|
|
hwaddr arm_cpu_get_phys_page_attrs_debug(CPUState *cs, vaddr addr,
|
|
MemTxAttrs *attrs)
|
|
{
|
|
ARMCPU *cpu = ARM_CPU(cs);
|
|
CPUARMState *env = &cpu->env;
|
|
hwaddr phys_addr;
|
|
target_ulong page_size;
|
|
int prot;
|
|
bool ret;
|
|
ARMMMUFaultInfo fi = {};
|
|
ARMMMUIdx mmu_idx = arm_mmu_idx(env);
|
|
|
|
*attrs = (MemTxAttrs) {};
|
|
|
|
ret = get_phys_addr(env, addr, 0, mmu_idx, &phys_addr,
|
|
attrs, &prot, &page_size, &fi, NULL);
|
|
|
|
if (ret) {
|
|
return -1;
|
|
}
|
|
return phys_addr;
|
|
}
|
|
|
|
#endif
|
|
|
|
/* Note that signed overflow is undefined in C. The following routines are
|
|
careful to use unsigned types where modulo arithmetic is required.
|
|
Failure to do so _will_ break on newer gcc. */
|
|
|
|
/* Signed saturating arithmetic. */
|
|
|
|
/* Perform 16-bit signed saturating addition. */
|
|
static inline uint16_t add16_sat(uint16_t a, uint16_t b)
|
|
{
|
|
uint16_t res;
|
|
|
|
res = a + b;
|
|
if (((res ^ a) & 0x8000) && !((a ^ b) & 0x8000)) {
|
|
if (a & 0x8000)
|
|
res = 0x8000;
|
|
else
|
|
res = 0x7fff;
|
|
}
|
|
return res;
|
|
}
|
|
|
|
/* Perform 8-bit signed saturating addition. */
|
|
static inline uint8_t add8_sat(uint8_t a, uint8_t b)
|
|
{
|
|
uint8_t res;
|
|
|
|
res = a + b;
|
|
if (((res ^ a) & 0x80) && !((a ^ b) & 0x80)) {
|
|
if (a & 0x80)
|
|
res = 0x80;
|
|
else
|
|
res = 0x7f;
|
|
}
|
|
return res;
|
|
}
|
|
|
|
/* Perform 16-bit signed saturating subtraction. */
|
|
static inline uint16_t sub16_sat(uint16_t a, uint16_t b)
|
|
{
|
|
uint16_t res;
|
|
|
|
res = a - b;
|
|
if (((res ^ a) & 0x8000) && ((a ^ b) & 0x8000)) {
|
|
if (a & 0x8000)
|
|
res = 0x8000;
|
|
else
|
|
res = 0x7fff;
|
|
}
|
|
return res;
|
|
}
|
|
|
|
/* Perform 8-bit signed saturating subtraction. */
|
|
static inline uint8_t sub8_sat(uint8_t a, uint8_t b)
|
|
{
|
|
uint8_t res;
|
|
|
|
res = a - b;
|
|
if (((res ^ a) & 0x80) && ((a ^ b) & 0x80)) {
|
|
if (a & 0x80)
|
|
res = 0x80;
|
|
else
|
|
res = 0x7f;
|
|
}
|
|
return res;
|
|
}
|
|
|
|
#define ADD16(a, b, n) RESULT(add16_sat(a, b), n, 16);
|
|
#define SUB16(a, b, n) RESULT(sub16_sat(a, b), n, 16);
|
|
#define ADD8(a, b, n) RESULT(add8_sat(a, b), n, 8);
|
|
#define SUB8(a, b, n) RESULT(sub8_sat(a, b), n, 8);
|
|
#define PFX q
|
|
|
|
#include "op_addsub.h"
|
|
|
|
/* Unsigned saturating arithmetic. */
|
|
static inline uint16_t add16_usat(uint16_t a, uint16_t b)
|
|
{
|
|
uint16_t res;
|
|
res = a + b;
|
|
if (res < a)
|
|
res = 0xffff;
|
|
return res;
|
|
}
|
|
|
|
static inline uint16_t sub16_usat(uint16_t a, uint16_t b)
|
|
{
|
|
if (a > b)
|
|
return a - b;
|
|
else
|
|
return 0;
|
|
}
|
|
|
|
static inline uint8_t add8_usat(uint8_t a, uint8_t b)
|
|
{
|
|
uint8_t res;
|
|
res = a + b;
|
|
if (res < a)
|
|
res = 0xff;
|
|
return res;
|
|
}
|
|
|
|
static inline uint8_t sub8_usat(uint8_t a, uint8_t b)
|
|
{
|
|
if (a > b)
|
|
return a - b;
|
|
else
|
|
return 0;
|
|
}
|
|
|
|
#define ADD16(a, b, n) RESULT(add16_usat(a, b), n, 16);
|
|
#define SUB16(a, b, n) RESULT(sub16_usat(a, b), n, 16);
|
|
#define ADD8(a, b, n) RESULT(add8_usat(a, b), n, 8);
|
|
#define SUB8(a, b, n) RESULT(sub8_usat(a, b), n, 8);
|
|
#define PFX uq
|
|
|
|
#include "op_addsub.h"
|
|
|
|
/* Signed modulo arithmetic. */
|
|
#define SARITH16(a, b, n, op) do { \
|
|
int32_t sum; \
|
|
sum = (int32_t)(int16_t)(a) op (int32_t)(int16_t)(b); \
|
|
RESULT(sum, n, 16); \
|
|
if (sum >= 0) \
|
|
ge |= 3 << (n * 2); \
|
|
} while(0)
|
|
|
|
#define SARITH8(a, b, n, op) do { \
|
|
int32_t sum; \
|
|
sum = (int32_t)(int8_t)(a) op (int32_t)(int8_t)(b); \
|
|
RESULT(sum, n, 8); \
|
|
if (sum >= 0) \
|
|
ge |= 1 << n; \
|
|
} while(0)
|
|
|
|
|
|
#define ADD16(a, b, n) SARITH16(a, b, n, +)
|
|
#define SUB16(a, b, n) SARITH16(a, b, n, -)
|
|
#define ADD8(a, b, n) SARITH8(a, b, n, +)
|
|
#define SUB8(a, b, n) SARITH8(a, b, n, -)
|
|
#define PFX s
|
|
#define ARITH_GE
|
|
|
|
#include "op_addsub.h"
|
|
|
|
/* Unsigned modulo arithmetic. */
|
|
#define ADD16(a, b, n) do { \
|
|
uint32_t sum; \
|
|
sum = (uint32_t)(uint16_t)(a) + (uint32_t)(uint16_t)(b); \
|
|
RESULT(sum, n, 16); \
|
|
if ((sum >> 16) == 1) \
|
|
ge |= 3 << (n * 2); \
|
|
} while(0)
|
|
|
|
#define ADD8(a, b, n) do { \
|
|
uint32_t sum; \
|
|
sum = (uint32_t)(uint8_t)(a) + (uint32_t)(uint8_t)(b); \
|
|
RESULT(sum, n, 8); \
|
|
if ((sum >> 8) == 1) \
|
|
ge |= 1 << n; \
|
|
} while(0)
|
|
|
|
#define SUB16(a, b, n) do { \
|
|
uint32_t sum; \
|
|
sum = (uint32_t)(uint16_t)(a) - (uint32_t)(uint16_t)(b); \
|
|
RESULT(sum, n, 16); \
|
|
if ((sum >> 16) == 0) \
|
|
ge |= 3 << (n * 2); \
|
|
} while(0)
|
|
|
|
#define SUB8(a, b, n) do { \
|
|
uint32_t sum; \
|
|
sum = (uint32_t)(uint8_t)(a) - (uint32_t)(uint8_t)(b); \
|
|
RESULT(sum, n, 8); \
|
|
if ((sum >> 8) == 0) \
|
|
ge |= 1 << n; \
|
|
} while(0)
|
|
|
|
#define PFX u
|
|
#define ARITH_GE
|
|
|
|
#include "op_addsub.h"
|
|
|
|
/* Halved signed arithmetic. */
|
|
#define ADD16(a, b, n) \
|
|
RESULT(((int32_t)(int16_t)(a) + (int32_t)(int16_t)(b)) >> 1, n, 16)
|
|
#define SUB16(a, b, n) \
|
|
RESULT(((int32_t)(int16_t)(a) - (int32_t)(int16_t)(b)) >> 1, n, 16)
|
|
#define ADD8(a, b, n) \
|
|
RESULT(((int32_t)(int8_t)(a) + (int32_t)(int8_t)(b)) >> 1, n, 8)
|
|
#define SUB8(a, b, n) \
|
|
RESULT(((int32_t)(int8_t)(a) - (int32_t)(int8_t)(b)) >> 1, n, 8)
|
|
#define PFX sh
|
|
|
|
#include "op_addsub.h"
|
|
|
|
/* Halved unsigned arithmetic. */
|
|
#define ADD16(a, b, n) \
|
|
RESULT(((uint32_t)(uint16_t)(a) + (uint32_t)(uint16_t)(b)) >> 1, n, 16)
|
|
#define SUB16(a, b, n) \
|
|
RESULT(((uint32_t)(uint16_t)(a) - (uint32_t)(uint16_t)(b)) >> 1, n, 16)
|
|
#define ADD8(a, b, n) \
|
|
RESULT(((uint32_t)(uint8_t)(a) + (uint32_t)(uint8_t)(b)) >> 1, n, 8)
|
|
#define SUB8(a, b, n) \
|
|
RESULT(((uint32_t)(uint8_t)(a) - (uint32_t)(uint8_t)(b)) >> 1, n, 8)
|
|
#define PFX uh
|
|
|
|
#include "op_addsub.h"
|
|
|
|
static inline uint8_t do_usad(uint8_t a, uint8_t b)
|
|
{
|
|
if (a > b)
|
|
return a - b;
|
|
else
|
|
return b - a;
|
|
}
|
|
|
|
/* Unsigned sum of absolute byte differences. */
|
|
uint32_t HELPER(usad8)(uint32_t a, uint32_t b)
|
|
{
|
|
uint32_t sum;
|
|
sum = do_usad(a, b);
|
|
sum += do_usad(a >> 8, b >> 8);
|
|
sum += do_usad(a >> 16, b >>16);
|
|
sum += do_usad(a >> 24, b >> 24);
|
|
return sum;
|
|
}
|
|
|
|
/* For ARMv6 SEL instruction. */
|
|
uint32_t HELPER(sel_flags)(uint32_t flags, uint32_t a, uint32_t b)
|
|
{
|
|
uint32_t mask;
|
|
|
|
mask = 0;
|
|
if (flags & 1)
|
|
mask |= 0xff;
|
|
if (flags & 2)
|
|
mask |= 0xff00;
|
|
if (flags & 4)
|
|
mask |= 0xff0000;
|
|
if (flags & 8)
|
|
mask |= 0xff000000;
|
|
return (a & mask) | (b & ~mask);
|
|
}
|
|
|
|
/* CRC helpers.
|
|
* The upper bytes of val (above the number specified by 'bytes') must have
|
|
* been zeroed out by the caller.
|
|
*/
|
|
uint32_t HELPER(crc32)(uint32_t acc, uint32_t val, uint32_t bytes)
|
|
{
|
|
uint8_t buf[4];
|
|
|
|
stl_le_p(buf, val);
|
|
|
|
/* zlib crc32 converts the accumulator and output to one's complement. */
|
|
return crc32(acc ^ 0xffffffff, buf, bytes) ^ 0xffffffff;
|
|
}
|
|
|
|
uint32_t HELPER(crc32c)(uint32_t acc, uint32_t val, uint32_t bytes)
|
|
{
|
|
uint8_t buf[4];
|
|
|
|
stl_le_p(buf, val);
|
|
|
|
/* Linux crc32c converts the output to one's complement. */
|
|
return crc32c(acc, buf, bytes) ^ 0xffffffff;
|
|
}
|
|
|
|
/* Return the exception level to which FP-disabled exceptions should
|
|
* be taken, or 0 if FP is enabled.
|
|
*/
|
|
int fp_exception_el(CPUARMState *env, int cur_el)
|
|
{
|
|
#ifndef CONFIG_USER_ONLY
|
|
/* CPACR and the CPTR registers don't exist before v6, so FP is
|
|
* always accessible
|
|
*/
|
|
if (!arm_feature(env, ARM_FEATURE_V6)) {
|
|
return 0;
|
|
}
|
|
|
|
if (arm_feature(env, ARM_FEATURE_M)) {
|
|
/* CPACR can cause a NOCP UsageFault taken to current security state */
|
|
if (!v7m_cpacr_pass(env, env->v7m.secure, cur_el != 0)) {
|
|
return 1;
|
|
}
|
|
|
|
if (arm_feature(env, ARM_FEATURE_M_SECURITY) && !env->v7m.secure) {
|
|
if (!extract32(env->v7m.nsacr, 10, 1)) {
|
|
/* FP insns cause a NOCP UsageFault taken to Secure */
|
|
return 3;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* The CPACR controls traps to EL1, or PL1 if we're 32 bit:
|
|
* 0, 2 : trap EL0 and EL1/PL1 accesses
|
|
* 1 : trap only EL0 accesses
|
|
* 3 : trap no accesses
|
|
* This register is ignored if E2H+TGE are both set.
|
|
*/
|
|
if ((arm_hcr_el2_eff(env) & (HCR_E2H | HCR_TGE)) != (HCR_E2H | HCR_TGE)) {
|
|
int fpen = extract32(env->cp15.cpacr_el1, 20, 2);
|
|
|
|
switch (fpen) {
|
|
case 0:
|
|
case 2:
|
|
if (cur_el == 0 || cur_el == 1) {
|
|
/* Trap to PL1, which might be EL1 or EL3 */
|
|
if (arm_is_secure(env) && !arm_el_is_aa64(env, 3)) {
|
|
return 3;
|
|
}
|
|
return 1;
|
|
}
|
|
if (cur_el == 3 && !is_a64(env)) {
|
|
/* Secure PL1 running at EL3 */
|
|
return 3;
|
|
}
|
|
break;
|
|
case 1:
|
|
if (cur_el == 0) {
|
|
return 1;
|
|
}
|
|
break;
|
|
case 3:
|
|
break;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* The NSACR allows A-profile AArch32 EL3 and M-profile secure mode
|
|
* to control non-secure access to the FPU. It doesn't have any
|
|
* effect if EL3 is AArch64 or if EL3 doesn't exist at all.
|
|
*/
|
|
if ((arm_feature(env, ARM_FEATURE_EL3) && !arm_el_is_aa64(env, 3) &&
|
|
cur_el <= 2 && !arm_is_secure_below_el3(env))) {
|
|
if (!extract32(env->cp15.nsacr, 10, 1)) {
|
|
/* FP insns act as UNDEF */
|
|
return cur_el == 2 ? 2 : 1;
|
|
}
|
|
}
|
|
|
|
/* For the CPTR registers we don't need to guard with an ARM_FEATURE
|
|
* check because zero bits in the registers mean "don't trap".
|
|
*/
|
|
|
|
/* CPTR_EL2 : present in v7VE or v8 */
|
|
if (cur_el <= 2 && extract32(env->cp15.cptr_el[2], 10, 1)
|
|
&& !arm_is_secure_below_el3(env)) {
|
|
/* Trap FP ops at EL2, NS-EL1 or NS-EL0 to EL2 */
|
|
return 2;
|
|
}
|
|
|
|
/* CPTR_EL3 : present in v8 */
|
|
if (extract32(env->cp15.cptr_el[3], 10, 1)) {
|
|
/* Trap all FP ops to EL3 */
|
|
return 3;
|
|
}
|
|
#endif
|
|
return 0;
|
|
}
|
|
|
|
/* Return the exception level we're running at if this is our mmu_idx */
|
|
int arm_mmu_idx_to_el(ARMMMUIdx mmu_idx)
|
|
{
|
|
if (mmu_idx & ARM_MMU_IDX_M) {
|
|
return mmu_idx & ARM_MMU_IDX_M_PRIV;
|
|
}
|
|
|
|
switch (mmu_idx) {
|
|
case ARMMMUIdx_E10_0:
|
|
case ARMMMUIdx_E20_0:
|
|
case ARMMMUIdx_SE10_0:
|
|
return 0;
|
|
case ARMMMUIdx_E10_1:
|
|
case ARMMMUIdx_E10_1_PAN:
|
|
case ARMMMUIdx_SE10_1:
|
|
case ARMMMUIdx_SE10_1_PAN:
|
|
return 1;
|
|
case ARMMMUIdx_E2:
|
|
case ARMMMUIdx_E20_2:
|
|
case ARMMMUIdx_E20_2_PAN:
|
|
return 2;
|
|
case ARMMMUIdx_SE3:
|
|
return 3;
|
|
default:
|
|
g_assert_not_reached();
|
|
}
|
|
}
|
|
|
|
#ifndef CONFIG_TCG
|
|
ARMMMUIdx arm_v7m_mmu_idx_for_secstate(CPUARMState *env, bool secstate)
|
|
{
|
|
g_assert_not_reached();
|
|
}
|
|
#endif
|
|
|
|
ARMMMUIdx arm_mmu_idx_el(CPUARMState *env, int el)
|
|
{
|
|
if (arm_feature(env, ARM_FEATURE_M)) {
|
|
return arm_v7m_mmu_idx_for_secstate(env, env->v7m.secure);
|
|
}
|
|
|
|
/* See ARM pseudo-function ELIsInHost. */
|
|
switch (el) {
|
|
case 0:
|
|
if (arm_is_secure_below_el3(env)) {
|
|
return ARMMMUIdx_SE10_0;
|
|
}
|
|
if ((env->cp15.hcr_el2 & (HCR_E2H | HCR_TGE)) == (HCR_E2H | HCR_TGE)
|
|
&& arm_el_is_aa64(env, 2)) {
|
|
return ARMMMUIdx_E20_0;
|
|
}
|
|
return ARMMMUIdx_E10_0;
|
|
case 1:
|
|
if (arm_is_secure_below_el3(env)) {
|
|
if (env->pstate & PSTATE_PAN) {
|
|
return ARMMMUIdx_SE10_1_PAN;
|
|
}
|
|
return ARMMMUIdx_SE10_1;
|
|
}
|
|
if (env->pstate & PSTATE_PAN) {
|
|
return ARMMMUIdx_E10_1_PAN;
|
|
}
|
|
return ARMMMUIdx_E10_1;
|
|
case 2:
|
|
/* TODO: ARMv8.4-SecEL2 */
|
|
/* Note that TGE does not apply at EL2. */
|
|
if ((env->cp15.hcr_el2 & HCR_E2H) && arm_el_is_aa64(env, 2)) {
|
|
if (env->pstate & PSTATE_PAN) {
|
|
return ARMMMUIdx_E20_2_PAN;
|
|
}
|
|
return ARMMMUIdx_E20_2;
|
|
}
|
|
return ARMMMUIdx_E2;
|
|
case 3:
|
|
return ARMMMUIdx_SE3;
|
|
default:
|
|
g_assert_not_reached();
|
|
}
|
|
}
|
|
|
|
ARMMMUIdx arm_mmu_idx(CPUARMState *env)
|
|
{
|
|
return arm_mmu_idx_el(env, arm_current_el(env));
|
|
}
|
|
|
|
int cpu_mmu_index(CPUARMState *env, bool ifetch)
|
|
{
|
|
return arm_to_core_mmu_idx(arm_mmu_idx(env));
|
|
}
|
|
|
|
#ifndef CONFIG_USER_ONLY
|
|
ARMMMUIdx arm_stage1_mmu_idx(CPUARMState *env)
|
|
{
|
|
return stage_1_mmu_idx(arm_mmu_idx(env));
|
|
}
|
|
#endif
|
|
|
|
static uint32_t rebuild_hflags_common(CPUARMState *env, int fp_el,
|
|
ARMMMUIdx mmu_idx, uint32_t flags)
|
|
{
|
|
flags = FIELD_DP32(flags, TBFLAG_ANY, FPEXC_EL, fp_el);
|
|
flags = FIELD_DP32(flags, TBFLAG_ANY, MMUIDX,
|
|
arm_to_core_mmu_idx(mmu_idx));
|
|
|
|
if (arm_singlestep_active(env)) {
|
|
flags = FIELD_DP32(flags, TBFLAG_ANY, SS_ACTIVE, 1);
|
|
}
|
|
return flags;
|
|
}
|
|
|
|
static uint32_t rebuild_hflags_common_32(CPUARMState *env, int fp_el,
|
|
ARMMMUIdx mmu_idx, uint32_t flags)
|
|
{
|
|
bool sctlr_b = arm_sctlr_b(env);
|
|
|
|
if (sctlr_b) {
|
|
flags = FIELD_DP32(flags, TBFLAG_A32, SCTLR_B, 1);
|
|
}
|
|
if (arm_cpu_data_is_big_endian_a32(env, sctlr_b)) {
|
|
flags = FIELD_DP32(flags, TBFLAG_ANY, BE_DATA, 1);
|
|
}
|
|
flags = FIELD_DP32(flags, TBFLAG_A32, NS, !access_secure_reg(env));
|
|
|
|
return rebuild_hflags_common(env, fp_el, mmu_idx, flags);
|
|
}
|
|
|
|
static uint32_t rebuild_hflags_m32(CPUARMState *env, int fp_el,
|
|
ARMMMUIdx mmu_idx)
|
|
{
|
|
uint32_t flags = 0;
|
|
|
|
if (arm_v7m_is_handler_mode(env)) {
|
|
flags = FIELD_DP32(flags, TBFLAG_M32, HANDLER, 1);
|
|
}
|
|
|
|
/*
|
|
* v8M always applies stack limit checks unless CCR.STKOFHFNMIGN
|
|
* is suppressing them because the requested execution priority
|
|
* is less than 0.
|
|
*/
|
|
if (arm_feature(env, ARM_FEATURE_V8) &&
|
|
!((mmu_idx & ARM_MMU_IDX_M_NEGPRI) &&
|
|
(env->v7m.ccr[env->v7m.secure] & R_V7M_CCR_STKOFHFNMIGN_MASK))) {
|
|
flags = FIELD_DP32(flags, TBFLAG_M32, STACKCHECK, 1);
|
|
}
|
|
|
|
return rebuild_hflags_common_32(env, fp_el, mmu_idx, flags);
|
|
}
|
|
|
|
static uint32_t rebuild_hflags_aprofile(CPUARMState *env)
|
|
{
|
|
int flags = 0;
|
|
|
|
flags = FIELD_DP32(flags, TBFLAG_ANY, DEBUG_TARGET_EL,
|
|
arm_debug_target_el(env));
|
|
return flags;
|
|
}
|
|
|
|
static uint32_t rebuild_hflags_a32(CPUARMState *env, int fp_el,
|
|
ARMMMUIdx mmu_idx)
|
|
{
|
|
uint32_t flags = rebuild_hflags_aprofile(env);
|
|
|
|
if (arm_el_is_aa64(env, 1)) {
|
|
flags = FIELD_DP32(flags, TBFLAG_A32, VFPEN, 1);
|
|
}
|
|
|
|
if (arm_current_el(env) < 2 && env->cp15.hstr_el2 &&
|
|
(arm_hcr_el2_eff(env) & (HCR_E2H | HCR_TGE)) != (HCR_E2H | HCR_TGE)) {
|
|
flags = FIELD_DP32(flags, TBFLAG_A32, HSTR_ACTIVE, 1);
|
|
}
|
|
|
|
return rebuild_hflags_common_32(env, fp_el, mmu_idx, flags);
|
|
}
|
|
|
|
static uint32_t rebuild_hflags_a64(CPUARMState *env, int el, int fp_el,
|
|
ARMMMUIdx mmu_idx)
|
|
{
|
|
uint32_t flags = rebuild_hflags_aprofile(env);
|
|
ARMMMUIdx stage1 = stage_1_mmu_idx(mmu_idx);
|
|
uint64_t tcr = regime_tcr(env, mmu_idx)->raw_tcr;
|
|
uint64_t sctlr;
|
|
int tbii, tbid;
|
|
|
|
flags = FIELD_DP32(flags, TBFLAG_ANY, AARCH64_STATE, 1);
|
|
|
|
/* Get control bits for tagged addresses. */
|
|
tbid = aa64_va_parameter_tbi(tcr, mmu_idx);
|
|
tbii = tbid & ~aa64_va_parameter_tbid(tcr, mmu_idx);
|
|
|
|
flags = FIELD_DP32(flags, TBFLAG_A64, TBII, tbii);
|
|
flags = FIELD_DP32(flags, TBFLAG_A64, TBID, tbid);
|
|
|
|
if (cpu_isar_feature(aa64_sve, env_archcpu(env))) {
|
|
int sve_el = sve_exception_el(env, el);
|
|
uint32_t zcr_len;
|
|
|
|
/*
|
|
* If SVE is disabled, but FP is enabled,
|
|
* then the effective len is 0.
|
|
*/
|
|
if (sve_el != 0 && fp_el == 0) {
|
|
zcr_len = 0;
|
|
} else {
|
|
zcr_len = sve_zcr_len_for_el(env, el);
|
|
}
|
|
flags = FIELD_DP32(flags, TBFLAG_A64, SVEEXC_EL, sve_el);
|
|
flags = FIELD_DP32(flags, TBFLAG_A64, ZCR_LEN, zcr_len);
|
|
}
|
|
|
|
sctlr = regime_sctlr(env, stage1);
|
|
|
|
if (arm_cpu_data_is_big_endian_a64(el, sctlr)) {
|
|
flags = FIELD_DP32(flags, TBFLAG_ANY, BE_DATA, 1);
|
|
}
|
|
|
|
if (cpu_isar_feature(aa64_pauth, env_archcpu(env))) {
|
|
/*
|
|
* In order to save space in flags, we record only whether
|
|
* pauth is "inactive", meaning all insns are implemented as
|
|
* a nop, or "active" when some action must be performed.
|
|
* The decision of which action to take is left to a helper.
|
|
*/
|
|
if (sctlr & (SCTLR_EnIA | SCTLR_EnIB | SCTLR_EnDA | SCTLR_EnDB)) {
|
|
flags = FIELD_DP32(flags, TBFLAG_A64, PAUTH_ACTIVE, 1);
|
|
}
|
|
}
|
|
|
|
if (cpu_isar_feature(aa64_bti, env_archcpu(env))) {
|
|
/* Note that SCTLR_EL[23].BT == SCTLR_BT1. */
|
|
if (sctlr & (el == 0 ? SCTLR_BT0 : SCTLR_BT1)) {
|
|
flags = FIELD_DP32(flags, TBFLAG_A64, BT, 1);
|
|
}
|
|
}
|
|
|
|
/* Compute the condition for using AccType_UNPRIV for LDTR et al. */
|
|
if (!(env->pstate & PSTATE_UAO)) {
|
|
switch (mmu_idx) {
|
|
case ARMMMUIdx_E10_1:
|
|
case ARMMMUIdx_E10_1_PAN:
|
|
case ARMMMUIdx_SE10_1:
|
|
case ARMMMUIdx_SE10_1_PAN:
|
|
/* TODO: ARMv8.3-NV */
|
|
flags = FIELD_DP32(flags, TBFLAG_A64, UNPRIV, 1);
|
|
break;
|
|
case ARMMMUIdx_E20_2:
|
|
case ARMMMUIdx_E20_2_PAN:
|
|
/* TODO: ARMv8.4-SecEL2 */
|
|
/*
|
|
* Note that EL20_2 is gated by HCR_EL2.E2H == 1, but EL20_0 is
|
|
* gated by HCR_EL2.<E2H,TGE> == '11', and so is LDTR.
|
|
*/
|
|
if (env->cp15.hcr_el2 & HCR_TGE) {
|
|
flags = FIELD_DP32(flags, TBFLAG_A64, UNPRIV, 1);
|
|
}
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
|
|
return rebuild_hflags_common(env, fp_el, mmu_idx, flags);
|
|
}
|
|
|
|
static uint32_t rebuild_hflags_internal(CPUARMState *env)
|
|
{
|
|
int el = arm_current_el(env);
|
|
int fp_el = fp_exception_el(env, el);
|
|
ARMMMUIdx mmu_idx = arm_mmu_idx_el(env, el);
|
|
|
|
if (is_a64(env)) {
|
|
return rebuild_hflags_a64(env, el, fp_el, mmu_idx);
|
|
} else if (arm_feature(env, ARM_FEATURE_M)) {
|
|
return rebuild_hflags_m32(env, fp_el, mmu_idx);
|
|
} else {
|
|
return rebuild_hflags_a32(env, fp_el, mmu_idx);
|
|
}
|
|
}
|
|
|
|
void arm_rebuild_hflags(CPUARMState *env)
|
|
{
|
|
env->hflags = rebuild_hflags_internal(env);
|
|
}
|
|
|
|
void HELPER(rebuild_hflags_m32)(CPUARMState *env, int el)
|
|
{
|
|
int fp_el = fp_exception_el(env, el);
|
|
ARMMMUIdx mmu_idx = arm_mmu_idx_el(env, el);
|
|
|
|
env->hflags = rebuild_hflags_m32(env, fp_el, mmu_idx);
|
|
}
|
|
|
|
/*
|
|
* If we have triggered a EL state change we can't rely on the
|
|
* translator having passed it too us, we need to recompute.
|
|
*/
|
|
void HELPER(rebuild_hflags_a32_newel)(CPUARMState *env)
|
|
{
|
|
int el = arm_current_el(env);
|
|
int fp_el = fp_exception_el(env, el);
|
|
ARMMMUIdx mmu_idx = arm_mmu_idx_el(env, el);
|
|
env->hflags = rebuild_hflags_a32(env, fp_el, mmu_idx);
|
|
}
|
|
|
|
void HELPER(rebuild_hflags_a32)(CPUARMState *env, int el)
|
|
{
|
|
int fp_el = fp_exception_el(env, el);
|
|
ARMMMUIdx mmu_idx = arm_mmu_idx_el(env, el);
|
|
|
|
env->hflags = rebuild_hflags_a32(env, fp_el, mmu_idx);
|
|
}
|
|
|
|
void HELPER(rebuild_hflags_a64)(CPUARMState *env, int el)
|
|
{
|
|
int fp_el = fp_exception_el(env, el);
|
|
ARMMMUIdx mmu_idx = arm_mmu_idx_el(env, el);
|
|
|
|
env->hflags = rebuild_hflags_a64(env, el, fp_el, mmu_idx);
|
|
}
|
|
|
|
static inline void assert_hflags_rebuild_correctly(CPUARMState *env)
|
|
{
|
|
#ifdef CONFIG_DEBUG_TCG
|
|
uint32_t env_flags_current = env->hflags;
|
|
uint32_t env_flags_rebuilt = rebuild_hflags_internal(env);
|
|
|
|
if (unlikely(env_flags_current != env_flags_rebuilt)) {
|
|
fprintf(stderr, "TCG hflags mismatch (current:0x%08x rebuilt:0x%08x)\n",
|
|
env_flags_current, env_flags_rebuilt);
|
|
abort();
|
|
}
|
|
#endif
|
|
}
|
|
|
|
void cpu_get_tb_cpu_state(CPUARMState *env, target_ulong *pc,
|
|
target_ulong *cs_base, uint32_t *pflags)
|
|
{
|
|
uint32_t flags = env->hflags;
|
|
uint32_t pstate_for_ss;
|
|
|
|
*cs_base = 0;
|
|
assert_hflags_rebuild_correctly(env);
|
|
|
|
if (FIELD_EX32(flags, TBFLAG_ANY, AARCH64_STATE)) {
|
|
*pc = env->pc;
|
|
if (cpu_isar_feature(aa64_bti, env_archcpu(env))) {
|
|
flags = FIELD_DP32(flags, TBFLAG_A64, BTYPE, env->btype);
|
|
}
|
|
pstate_for_ss = env->pstate;
|
|
} else {
|
|
*pc = env->regs[15];
|
|
|
|
if (arm_feature(env, ARM_FEATURE_M)) {
|
|
if (arm_feature(env, ARM_FEATURE_M_SECURITY) &&
|
|
FIELD_EX32(env->v7m.fpccr[M_REG_S], V7M_FPCCR, S)
|
|
!= env->v7m.secure) {
|
|
flags = FIELD_DP32(flags, TBFLAG_M32, FPCCR_S_WRONG, 1);
|
|
}
|
|
|
|
if ((env->v7m.fpccr[env->v7m.secure] & R_V7M_FPCCR_ASPEN_MASK) &&
|
|
(!(env->v7m.control[M_REG_S] & R_V7M_CONTROL_FPCA_MASK) ||
|
|
(env->v7m.secure &&
|
|
!(env->v7m.control[M_REG_S] & R_V7M_CONTROL_SFPA_MASK)))) {
|
|
/*
|
|
* ASPEN is set, but FPCA/SFPA indicate that there is no
|
|
* active FP context; we must create a new FP context before
|
|
* executing any FP insn.
|
|
*/
|
|
flags = FIELD_DP32(flags, TBFLAG_M32, NEW_FP_CTXT_NEEDED, 1);
|
|
}
|
|
|
|
bool is_secure = env->v7m.fpccr[M_REG_S] & R_V7M_FPCCR_S_MASK;
|
|
if (env->v7m.fpccr[is_secure] & R_V7M_FPCCR_LSPACT_MASK) {
|
|
flags = FIELD_DP32(flags, TBFLAG_M32, LSPACT, 1);
|
|
}
|
|
} else {
|
|
/*
|
|
* Note that XSCALE_CPAR shares bits with VECSTRIDE.
|
|
* Note that VECLEN+VECSTRIDE are RES0 for M-profile.
|
|
*/
|
|
if (arm_feature(env, ARM_FEATURE_XSCALE)) {
|
|
flags = FIELD_DP32(flags, TBFLAG_A32,
|
|
XSCALE_CPAR, env->cp15.c15_cpar);
|
|
} else {
|
|
flags = FIELD_DP32(flags, TBFLAG_A32, VECLEN,
|
|
env->vfp.vec_len);
|
|
flags = FIELD_DP32(flags, TBFLAG_A32, VECSTRIDE,
|
|
env->vfp.vec_stride);
|
|
}
|
|
if (env->vfp.xregs[ARM_VFP_FPEXC] & (1 << 30)) {
|
|
flags = FIELD_DP32(flags, TBFLAG_A32, VFPEN, 1);
|
|
}
|
|
}
|
|
|
|
flags = FIELD_DP32(flags, TBFLAG_AM32, THUMB, env->thumb);
|
|
flags = FIELD_DP32(flags, TBFLAG_AM32, CONDEXEC, env->condexec_bits);
|
|
pstate_for_ss = env->uncached_cpsr;
|
|
}
|
|
|
|
/*
|
|
* The SS_ACTIVE and PSTATE_SS bits correspond to the state machine
|
|
* states defined in the ARM ARM for software singlestep:
|
|
* SS_ACTIVE PSTATE.SS State
|
|
* 0 x Inactive (the TB flag for SS is always 0)
|
|
* 1 0 Active-pending
|
|
* 1 1 Active-not-pending
|
|
* SS_ACTIVE is set in hflags; PSTATE_SS is computed every TB.
|
|
*/
|
|
if (FIELD_EX32(flags, TBFLAG_ANY, SS_ACTIVE) &&
|
|
(pstate_for_ss & PSTATE_SS)) {
|
|
flags = FIELD_DP32(flags, TBFLAG_ANY, PSTATE_SS, 1);
|
|
}
|
|
|
|
*pflags = flags;
|
|
}
|
|
|
|
#ifdef TARGET_AARCH64
|
|
/*
|
|
* The manual says that when SVE is enabled and VQ is widened the
|
|
* implementation is allowed to zero the previously inaccessible
|
|
* portion of the registers. The corollary to that is that when
|
|
* SVE is enabled and VQ is narrowed we are also allowed to zero
|
|
* the now inaccessible portion of the registers.
|
|
*
|
|
* The intent of this is that no predicate bit beyond VQ is ever set.
|
|
* Which means that some operations on predicate registers themselves
|
|
* may operate on full uint64_t or even unrolled across the maximum
|
|
* uint64_t[4]. Performing 4 bits of host arithmetic unconditionally
|
|
* may well be cheaper than conditionals to restrict the operation
|
|
* to the relevant portion of a uint16_t[16].
|
|
*/
|
|
void aarch64_sve_narrow_vq(CPUARMState *env, unsigned vq)
|
|
{
|
|
int i, j;
|
|
uint64_t pmask;
|
|
|
|
assert(vq >= 1 && vq <= ARM_MAX_VQ);
|
|
assert(vq <= env_archcpu(env)->sve_max_vq);
|
|
|
|
/* Zap the high bits of the zregs. */
|
|
for (i = 0; i < 32; i++) {
|
|
memset(&env->vfp.zregs[i].d[2 * vq], 0, 16 * (ARM_MAX_VQ - vq));
|
|
}
|
|
|
|
/* Zap the high bits of the pregs and ffr. */
|
|
pmask = 0;
|
|
if (vq & 3) {
|
|
pmask = ~(-1ULL << (16 * (vq & 3)));
|
|
}
|
|
for (j = vq / 4; j < ARM_MAX_VQ / 4; j++) {
|
|
for (i = 0; i < 17; ++i) {
|
|
env->vfp.pregs[i].p[j] &= pmask;
|
|
}
|
|
pmask = 0;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Notice a change in SVE vector size when changing EL.
|
|
*/
|
|
void aarch64_sve_change_el(CPUARMState *env, int old_el,
|
|
int new_el, bool el0_a64)
|
|
{
|
|
ARMCPU *cpu = env_archcpu(env);
|
|
int old_len, new_len;
|
|
bool old_a64, new_a64;
|
|
|
|
/* Nothing to do if no SVE. */
|
|
if (!cpu_isar_feature(aa64_sve, cpu)) {
|
|
return;
|
|
}
|
|
|
|
/* Nothing to do if FP is disabled in either EL. */
|
|
if (fp_exception_el(env, old_el) || fp_exception_el(env, new_el)) {
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* DDI0584A.d sec 3.2: "If SVE instructions are disabled or trapped
|
|
* at ELx, or not available because the EL is in AArch32 state, then
|
|
* for all purposes other than a direct read, the ZCR_ELx.LEN field
|
|
* has an effective value of 0".
|
|
*
|
|
* Consider EL2 (aa64, vq=4) -> EL0 (aa32) -> EL1 (aa64, vq=0).
|
|
* If we ignore aa32 state, we would fail to see the vq4->vq0 transition
|
|
* from EL2->EL1. Thus we go ahead and narrow when entering aa32 so that
|
|
* we already have the correct register contents when encountering the
|
|
* vq0->vq0 transition between EL0->EL1.
|
|
*/
|
|
old_a64 = old_el ? arm_el_is_aa64(env, old_el) : el0_a64;
|
|
old_len = (old_a64 && !sve_exception_el(env, old_el)
|
|
? sve_zcr_len_for_el(env, old_el) : 0);
|
|
new_a64 = new_el ? arm_el_is_aa64(env, new_el) : el0_a64;
|
|
new_len = (new_a64 && !sve_exception_el(env, new_el)
|
|
? sve_zcr_len_for_el(env, new_el) : 0);
|
|
|
|
/* When changing vector length, clear inaccessible state. */
|
|
if (new_len < old_len) {
|
|
aarch64_sve_narrow_vq(env, new_len + 1);
|
|
}
|
|
}
|
|
#endif
|