..
acpi
hw/tpm: Use the IEC binary prefix definitions
2018-07-02 15:41:13 +02:00
adc
arm
hw/arm/iotkit: Wire up the lines for MSCs
2018-08-24 13:17:44 +01:00
audio
block
block: Remove deprecated -drive option serial
2018-08-15 12:50:39 +02:00
char
imx_serial: Generate interrupt on receive data ready if enabled
2018-08-20 11:24:31 +01:00
core
hw/core/split-irq: Device that splits IRQ lines
2018-03-02 11:03:45 +00:00
cpu
cris
display
hw/display/bcm2835_fb: Validate config settings
2018-08-24 13:17:50 +01:00
dma
hw/dma/pl080: Don't use CPU address space for DMA accesses
2018-08-20 11:24:33 +01:00
gpio
i2c
i2c: pm_smbus: Add the ability to force block transfer enable
2018-08-23 18:46:25 +02:00
i386
i386: do not migrate MSR_SMI_COUNT on machine types <2.12
2018-07-30 14:00:11 +02:00
ide
ide: introduce ide_transfer_start_norecurse
2018-06-08 13:36:31 -04:00
input
adb: add property to disable direct reg 3 writes
2018-06-16 16:32:33 +10:00
intc
intc/arm_gic: Add the virtualization extensions to the GIC state
2018-08-14 17:17:20 +01:00
ipack
ipmi
isa
superio: Don't use MAX_SERIAL_PORTS for serial port limit
2018-04-26 13:57:00 +01:00
kvm
lm32
m68k
mem
pc-dimm: assign and verify the "addr" property during pre_plug
2018-08-23 18:46:25 +02:00
mips
hw/mips: Use the IEC binary prefix definitions
2018-07-02 15:41:16 +02:00
misc
check/next for 20180822
2018-08-24 14:46:31 +01:00
net
hw/net: Use the IEC binary prefix definitions
2018-07-02 15:41:16 +02:00
nvram
fw_cfg: import & use linux/qemu_fw_cfg.h
2018-08-23 18:46:25 +02:00
pci
allocate pci id for mdpy
2018-05-23 03:14:40 +03:00
pci-bridge
pci-host
uninorth: remove token register from uninorth device
2018-06-12 09:33:52 +10:00
ppc
spapr: introduce a IRQ controller backend to the machine
2018-08-21 14:28:45 +10:00
riscv
hw/riscv/sifive_u: Connect the Cadence GEM Ethernet device
2018-07-05 15:24:25 -07:00
s390x
s390x: remove 's390-squash-mcss' option
2018-08-20 14:18:49 +02:00
scsi
Block layer patches:
2018-06-29 18:29:15 +01:00
sd
sdcard: Reflect when the Spec v3 is supported in the Config Register (SCR)
2018-06-08 13:15:34 +01:00
sh4
hw: Do not include "exec/address-spaces.h" if it is not necessary
2018-06-01 14:15:10 +02:00
smbios
sparc
ssi
hw/ssi/pl022: Allow use as embedded-struct device
2018-08-24 13:17:44 +01:00
timer
hw/timer/cmsdk-apb-dualtimer: Implement CMSDK dual timer module
2018-08-24 13:17:41 +01:00
tricore
unicore32
usb
vfio
vfio/spapr: Allow backing bigger guest IOMMU pages with smaller physical pages
2018-08-21 14:28:45 +10:00
virtio
virtio-gpu: pass down VirtIOGPU pointer to a bunch of functions
2018-09-03 08:31:50 +02:00
watchdog
hw/watchdog/cmsdk_apb_watchdog: Implement CMSDK APB watchdog module
2018-08-20 11:24:33 +01:00
xen
compiler: add a sizeof_field() macro
2018-06-27 13:01:40 +01:00
xtensa
boards.h
fw_cfg: ignore suffixes in the bootdevice list dependent on machine class
2018-08-16 22:27:43 -03:00
bt.h
compat.h
s390x: introduce 3.1 compat machine
2018-08-20 14:18:49 +02:00
devices.h
hw: Clean "hw/devices.h" includes
2018-06-01 14:15:10 +02:00
elf_ops.h
elf: On elf loading, treat both EM_MIPS and EM_NANOMIPS as legal for MIPS
2018-08-24 17:51:59 +02:00
empty_slot.h
fw-path-provider.h
hotplug.h
qdev: add HotplugHandler->post_plug() callback
2018-07-16 16:58:16 +02:00
hw.h
ide.h
irq.h
hw/core/split-irq: Device that splits IRQ lines
2018-03-02 11:03:45 +00:00
loader-fit.h
loader.h
loader: Implement .hex file loader
2018-08-16 14:05:28 +01:00
nmi.h
or-irq.h
hw/core/or-irq: Support more than 16 inputs to an OR gate
2018-06-15 15:23:34 +01:00
pcmcia.h
platform-bus.h
platform-bus-device: use device plug callback instead of machine_done notifier
2018-05-10 18:10:56 +01:00
ptimer.h
ptimer: Add TRIGGER_ONLY_ON_DECREMENT policy option
2018-07-09 14:51:34 +01:00
qdev-core.h
qdev: Remove DeviceClass::init() and ::exit()
2018-06-01 15:14:31 +02:00
qdev-dma.h
qdev-properties.h
net: Remove the deprecated "vlan" parameter
2018-05-14 15:47:14 +08:00
qdev.h
register.h
hw: register: Run post_write hook on reset
2018-03-01 11:05:43 +00:00
registerfields.h
stream.h
sysbus.h
hw/core/sysbus: Add a function for creating and attaching an object
2018-07-17 13:12:49 +01:00
usb.h