qemu/hw/sd/aspeed_sdhci.c
Andrew Jeffery 0e2c24c626 hw/sd: Configure number of slots exposed by the ASPEED SDHCI model
The AST2600 includes a second cut-down version of the SD/MMC controller
found in the AST2500, named the eMMC controller. It's cut down in the
sense that it only supports one slot rather than two, but it brings the
total number of slots supported by the AST2600 to three.

The existing code assumed that the SD controller always provided two
slots. Rework the SDHCI object to expose the number of slots as a
property to be set by the SoC configuration.

Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-id: 20200114103433.30534-2-clg@kaod.org
[PMM: fixed up to use device_class_set_props()]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-01-30 16:02:02 +00:00

206 lines
6.0 KiB
C

/*
* Aspeed SD Host Controller
* Eddie James <eajames@linux.ibm.com>
*
* Copyright (C) 2019 IBM Corp
* SPDX-License-Identifer: GPL-2.0-or-later
*/
#include "qemu/osdep.h"
#include "qemu/log.h"
#include "qemu/error-report.h"
#include "hw/sd/aspeed_sdhci.h"
#include "qapi/error.h"
#include "hw/irq.h"
#include "migration/vmstate.h"
#include "hw/qdev-properties.h"
#define ASPEED_SDHCI_INFO 0x00
#define ASPEED_SDHCI_INFO_RESET 0x00030000
#define ASPEED_SDHCI_DEBOUNCE 0x04
#define ASPEED_SDHCI_DEBOUNCE_RESET 0x00000005
#define ASPEED_SDHCI_BUS 0x08
#define ASPEED_SDHCI_SDIO_140 0x10
#define ASPEED_SDHCI_SDIO_148 0x18
#define ASPEED_SDHCI_SDIO_240 0x20
#define ASPEED_SDHCI_SDIO_248 0x28
#define ASPEED_SDHCI_WP_POL 0xec
#define ASPEED_SDHCI_CARD_DET 0xf0
#define ASPEED_SDHCI_IRQ_STAT 0xfc
#define TO_REG(addr) ((addr) / sizeof(uint32_t))
static uint64_t aspeed_sdhci_read(void *opaque, hwaddr addr, unsigned int size)
{
uint32_t val = 0;
AspeedSDHCIState *sdhci = opaque;
switch (addr) {
case ASPEED_SDHCI_SDIO_140:
val = (uint32_t)sdhci->slots[0].capareg;
break;
case ASPEED_SDHCI_SDIO_148:
val = (uint32_t)sdhci->slots[0].maxcurr;
break;
case ASPEED_SDHCI_SDIO_240:
val = (uint32_t)sdhci->slots[1].capareg;
break;
case ASPEED_SDHCI_SDIO_248:
val = (uint32_t)sdhci->slots[1].maxcurr;
break;
default:
if (addr < ASPEED_SDHCI_REG_SIZE) {
val = sdhci->regs[TO_REG(addr)];
} else {
qemu_log_mask(LOG_GUEST_ERROR,
"%s: Out-of-bounds read at 0x%" HWADDR_PRIx "\n",
__func__, addr);
}
}
return (uint64_t)val;
}
static void aspeed_sdhci_write(void *opaque, hwaddr addr, uint64_t val,
unsigned int size)
{
AspeedSDHCIState *sdhci = opaque;
switch (addr) {
case ASPEED_SDHCI_SDIO_140:
sdhci->slots[0].capareg = (uint64_t)(uint32_t)val;
break;
case ASPEED_SDHCI_SDIO_148:
sdhci->slots[0].maxcurr = (uint64_t)(uint32_t)val;
break;
case ASPEED_SDHCI_SDIO_240:
sdhci->slots[1].capareg = (uint64_t)(uint32_t)val;
break;
case ASPEED_SDHCI_SDIO_248:
sdhci->slots[1].maxcurr = (uint64_t)(uint32_t)val;
break;
default:
if (addr < ASPEED_SDHCI_REG_SIZE) {
sdhci->regs[TO_REG(addr)] = (uint32_t)val;
} else {
qemu_log_mask(LOG_GUEST_ERROR,
"%s: Out-of-bounds write at 0x%" HWADDR_PRIx "\n",
__func__, addr);
}
}
}
static const MemoryRegionOps aspeed_sdhci_ops = {
.read = aspeed_sdhci_read,
.write = aspeed_sdhci_write,
.endianness = DEVICE_NATIVE_ENDIAN,
.valid.min_access_size = 4,
.valid.max_access_size = 4,
};
static void aspeed_sdhci_set_irq(void *opaque, int n, int level)
{
AspeedSDHCIState *sdhci = opaque;
if (level) {
sdhci->regs[TO_REG(ASPEED_SDHCI_IRQ_STAT)] |= BIT(n);
qemu_irq_raise(sdhci->irq);
} else {
sdhci->regs[TO_REG(ASPEED_SDHCI_IRQ_STAT)] &= ~BIT(n);
qemu_irq_lower(sdhci->irq);
}
}
static void aspeed_sdhci_realize(DeviceState *dev, Error **errp)
{
Error *err = NULL;
SysBusDevice *sbd = SYS_BUS_DEVICE(dev);
AspeedSDHCIState *sdhci = ASPEED_SDHCI(dev);
/* Create input irqs for the slots */
qdev_init_gpio_in_named_with_opaque(DEVICE(sbd), aspeed_sdhci_set_irq,
sdhci, NULL, sdhci->num_slots);
sysbus_init_irq(sbd, &sdhci->irq);
memory_region_init_io(&sdhci->iomem, OBJECT(sdhci), &aspeed_sdhci_ops,
sdhci, TYPE_ASPEED_SDHCI, 0x1000);
sysbus_init_mmio(sbd, &sdhci->iomem);
for (int i = 0; i < sdhci->num_slots; ++i) {
Object *sdhci_slot = OBJECT(&sdhci->slots[i]);
SysBusDevice *sbd_slot = SYS_BUS_DEVICE(&sdhci->slots[i]);
object_property_set_int(sdhci_slot, 2, "sd-spec-version", &err);
if (err) {
error_propagate(errp, err);
return;
}
object_property_set_uint(sdhci_slot, ASPEED_SDHCI_CAPABILITIES,
"capareg", &err);
if (err) {
error_propagate(errp, err);
return;
}
object_property_set_bool(sdhci_slot, true, "realized", &err);
if (err) {
error_propagate(errp, err);
return;
}
sysbus_connect_irq(sbd_slot, 0, qdev_get_gpio_in(DEVICE(sbd), i));
memory_region_add_subregion(&sdhci->iomem, (i + 1) * 0x100,
&sdhci->slots[i].iomem);
}
}
static void aspeed_sdhci_reset(DeviceState *dev)
{
AspeedSDHCIState *sdhci = ASPEED_SDHCI(dev);
memset(sdhci->regs, 0, ASPEED_SDHCI_REG_SIZE);
sdhci->regs[TO_REG(ASPEED_SDHCI_INFO)] = ASPEED_SDHCI_INFO_RESET;
sdhci->regs[TO_REG(ASPEED_SDHCI_DEBOUNCE)] = ASPEED_SDHCI_DEBOUNCE_RESET;
}
static const VMStateDescription vmstate_aspeed_sdhci = {
.name = TYPE_ASPEED_SDHCI,
.version_id = 1,
.fields = (VMStateField[]) {
VMSTATE_UINT32_ARRAY(regs, AspeedSDHCIState, ASPEED_SDHCI_NUM_REGS),
VMSTATE_END_OF_LIST(),
},
};
static Property aspeed_sdhci_properties[] = {
DEFINE_PROP_UINT8("num-slots", AspeedSDHCIState, num_slots, 0),
DEFINE_PROP_END_OF_LIST(),
};
static void aspeed_sdhci_class_init(ObjectClass *classp, void *data)
{
DeviceClass *dc = DEVICE_CLASS(classp);
dc->realize = aspeed_sdhci_realize;
dc->reset = aspeed_sdhci_reset;
dc->vmsd = &vmstate_aspeed_sdhci;
device_class_set_props(dc, aspeed_sdhci_properties);
}
static TypeInfo aspeed_sdhci_info = {
.name = TYPE_ASPEED_SDHCI,
.parent = TYPE_SYS_BUS_DEVICE,
.instance_size = sizeof(AspeedSDHCIState),
.class_init = aspeed_sdhci_class_init,
};
static void aspeed_sdhci_register_types(void)
{
type_register_static(&aspeed_sdhci_info);
}
type_init(aspeed_sdhci_register_types)