qemu/hw/ide/via.c
Alexander Graf 40a6238a20 ide: Split out BMDMA code from ATA core
The ATA core is currently heavily intertwined with BMDMA code. Let's loosen
that a bit, so we can happily replace the DMA backend with different
implementations.

Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-12-17 16:11:01 +01:00

187 lines
5.9 KiB
C

/*
* QEMU IDE Emulation: PCI VIA82C686B support.
*
* Copyright (c) 2003 Fabrice Bellard
* Copyright (c) 2006 Openedhand Ltd.
* Copyright (c) 2010 Huacai Chen <zltjiangshi@gmail.com>
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#include <hw/hw.h>
#include <hw/pc.h>
#include <hw/pci.h>
#include <hw/isa.h>
#include "block.h"
#include "block_int.h"
#include "sysemu.h"
#include "dma.h"
#include <hw/ide/pci.h>
static uint32_t bmdma_readb(void *opaque, uint32_t addr)
{
BMDMAState *bm = opaque;
uint32_t val;
switch (addr & 3) {
case 0:
val = bm->cmd;
break;
case 2:
val = bm->status;
break;
default:
val = 0xff;
break;
}
#ifdef DEBUG_IDE
printf("bmdma: readb 0x%02x : 0x%02x\n", addr, val);
#endif
return val;
}
static void bmdma_writeb(void *opaque, uint32_t addr, uint32_t val)
{
BMDMAState *bm = opaque;
#ifdef DEBUG_IDE
printf("bmdma: writeb 0x%02x : 0x%02x\n", addr, val);
#endif
switch (addr & 3) {
case 2:
bm->status = (val & 0x60) | (bm->status & 1) | (bm->status & ~val & 0x06);
break;
default:;
}
}
static void bmdma_map(PCIDevice *pci_dev, int region_num,
pcibus_t addr, pcibus_t size, int type)
{
PCIIDEState *d = DO_UPCAST(PCIIDEState, dev, pci_dev);
int i;
for(i = 0;i < 2; i++) {
BMDMAState *bm = &d->bmdma[i];
bmdma_init(&d->bus[i], bm);
bm->bus = d->bus+i;
qemu_add_vm_change_state_handler(d->bus[i].dma->ops->restart_cb,
&bm->dma);
register_ioport_write(addr, 1, 1, bmdma_cmd_writeb, bm);
register_ioport_write(addr + 1, 3, 1, bmdma_writeb, bm);
register_ioport_read(addr, 4, 1, bmdma_readb, bm);
iorange_init(&bm->addr_ioport, &bmdma_addr_ioport_ops, addr + 4, 4);
ioport_register(&bm->addr_ioport);
addr += 8;
}
}
static void via_reset(void *opaque)
{
PCIIDEState *d = opaque;
uint8_t *pci_conf = d->dev.config;
int i;
for (i = 0; i < 2; i++) {
ide_bus_reset(&d->bus[i]);
}
pci_set_word(pci_conf + PCI_COMMAND, PCI_COMMAND_WAIT);
pci_set_word(pci_conf + PCI_STATUS, PCI_STATUS_FAST_BACK |
PCI_STATUS_DEVSEL_MEDIUM);
pci_set_long(pci_conf + PCI_BASE_ADDRESS_0, 0x000001f0);
pci_set_long(pci_conf + PCI_BASE_ADDRESS_1, 0x000003f4);
pci_set_long(pci_conf + PCI_BASE_ADDRESS_2, 0x00000170);
pci_set_long(pci_conf + PCI_BASE_ADDRESS_3, 0x00000374);
pci_set_long(pci_conf + PCI_BASE_ADDRESS_4, 0x0000cc01); /* BMIBA: 20-23h */
pci_set_long(pci_conf + PCI_INTERRUPT_LINE, 0x0000010e);
/* IDE chip enable, IDE configuration 1/2, IDE FIFO Configuration*/
pci_set_long(pci_conf + 0x40, 0x0a090600);
/* IDE misc configuration 1/2/3 */
pci_set_long(pci_conf + 0x44, 0x00c00068);
/* IDE Timing control */
pci_set_long(pci_conf + 0x48, 0xa8a8a8a8);
/* IDE Address Setup Time */
pci_set_long(pci_conf + 0x4c, 0x000000ff);
/* UltraDMA Extended Timing Control*/
pci_set_long(pci_conf + 0x50, 0x07070707);
/* UltraDMA FIFO Control */
pci_set_long(pci_conf + 0x54, 0x00000004);
/* IDE primary sector size */
pci_set_long(pci_conf + 0x60, 0x00000200);
/* IDE secondary sector size */
pci_set_long(pci_conf + 0x68, 0x00000200);
/* PCI PM Block */
pci_set_long(pci_conf + 0xc0, 0x00020001);
}
/* via ide func */
static int vt82c686b_ide_initfn(PCIDevice *dev)
{
PCIIDEState *d = DO_UPCAST(PCIIDEState, dev, dev);;
uint8_t *pci_conf = d->dev.config;
pci_config_set_vendor_id(pci_conf, PCI_VENDOR_ID_VIA);
pci_config_set_device_id(pci_conf, PCI_DEVICE_ID_VIA_IDE);
pci_config_set_class(pci_conf, PCI_CLASS_STORAGE_IDE);
pci_config_set_prog_interface(pci_conf, 0x8a); /* legacy ATA mode */
pci_config_set_revision(pci_conf,0x06); /* Revision 0.6 */
pci_set_long(pci_conf + PCI_CAPABILITY_LIST, 0x000000c0);
qemu_register_reset(via_reset, d);
pci_register_bar(&d->dev, 4, 0x10,
PCI_BASE_ADDRESS_SPACE_IO, bmdma_map);
vmstate_register(&dev->qdev, 0, &vmstate_ide_pci, d);
ide_bus_new(&d->bus[0], &d->dev.qdev, 0);
ide_bus_new(&d->bus[1], &d->dev.qdev, 1);
ide_init2(&d->bus[0], isa_reserve_irq(14));
ide_init2(&d->bus[1], isa_reserve_irq(15));
ide_init_ioport(&d->bus[0], 0x1f0, 0x3f6);
ide_init_ioport(&d->bus[1], 0x170, 0x376);
return 0;
}
void vt82c686b_ide_init(PCIBus *bus, DriveInfo **hd_table, int devfn)
{
PCIDevice *dev;
dev = pci_create_simple(bus, devfn, "via-ide");
pci_ide_create_devs(dev, hd_table);
}
static PCIDeviceInfo via_ide_info = {
.qdev.name = "via-ide",
.qdev.size = sizeof(PCIIDEState),
.qdev.no_user = 1,
.init = vt82c686b_ide_initfn,
};
static void via_ide_register(void)
{
pci_qdev_register(&via_ide_info);
}
device_init(via_ide_register);