0c2d467191
The example code is rendered slightly mangled due to missing code block. Properly escape the code block and add shell prompt and qemu to fit in with the other examples on the page. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20220905163939.1599368-1-alex.bennee@linaro.org> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
190 lines
6.6 KiB
ReStructuredText
190 lines
6.6 KiB
ReStructuredText
'virt' Generic Virtual Platform (``virt``)
|
||
==========================================
|
||
|
||
The ``virt`` board is a platform which does not correspond to any real hardware;
|
||
it is designed for use in virtual machines. It is the recommended board type
|
||
if you simply want to run a guest such as Linux and do not care about
|
||
reproducing the idiosyncrasies and limitations of a particular bit of
|
||
real-world hardware.
|
||
|
||
Supported devices
|
||
-----------------
|
||
|
||
The ``virt`` machine supports the following devices:
|
||
|
||
* Up to 8 generic RV32GC/RV64GC cores, with optional extensions
|
||
* Core Local Interruptor (CLINT)
|
||
* Platform-Level Interrupt Controller (PLIC)
|
||
* CFI parallel NOR flash memory
|
||
* 1 NS16550 compatible UART
|
||
* 1 Google Goldfish RTC
|
||
* 1 SiFive Test device
|
||
* 8 virtio-mmio transport devices
|
||
* 1 generic PCIe host bridge
|
||
* The fw_cfg device that allows a guest to obtain data from QEMU
|
||
|
||
The hypervisor extension has been enabled for the default CPU, so virtual
|
||
machines with hypervisor extension can simply be used without explicitly
|
||
declaring.
|
||
|
||
Hardware configuration information
|
||
----------------------------------
|
||
|
||
The ``virt`` machine automatically generates a device tree blob ("dtb")
|
||
which it passes to the guest, if there is no ``-dtb`` option. This provides
|
||
information about the addresses, interrupt lines and other configuration of
|
||
the various devices in the system. Guest software should discover the devices
|
||
that are present in the generated DTB.
|
||
|
||
If users want to provide their own DTB, they can use the ``-dtb`` option.
|
||
These DTBs should have the following requirements:
|
||
|
||
* The number of subnodes of the /cpus node should match QEMU's ``-smp`` option
|
||
* The /memory reg size should match QEMU’s selected ram_size via ``-m``
|
||
* Should contain a node for the CLINT device with a compatible string
|
||
"riscv,clint0" if using with OpenSBI BIOS images
|
||
|
||
Boot options
|
||
------------
|
||
|
||
The ``virt`` machine can start using the standard -kernel functionality
|
||
for loading a Linux kernel, a VxWorks kernel, an S-mode U-Boot bootloader
|
||
with the default OpenSBI firmware image as the -bios. It also supports
|
||
the recommended RISC-V bootflow: U-Boot SPL (M-mode) loads OpenSBI fw_dynamic
|
||
firmware and U-Boot proper (S-mode), using the standard -bios functionality.
|
||
|
||
Machine-specific options
|
||
------------------------
|
||
|
||
The following machine-specific options are supported:
|
||
|
||
- aclint=[on|off]
|
||
|
||
When this option is "on", ACLINT devices will be emulated instead of
|
||
SiFive CLINT. When not specified, this option is assumed to be "off".
|
||
|
||
- aia=[none|aplic|aplic-imsic]
|
||
|
||
This option allows selecting interrupt controller defined by the AIA
|
||
(advanced interrupt architecture) specification. The "aia=aplic" selects
|
||
APLIC (advanced platform level interrupt controller) to handle wired
|
||
interrupts whereas the "aia=aplic-imsic" selects APLIC and IMSIC (incoming
|
||
message signaled interrupt controller) to handle both wired interrupts and
|
||
MSIs. When not specified, this option is assumed to be "none" which selects
|
||
SiFive PLIC to handle wired interrupts.
|
||
|
||
- aia-guests=nnn
|
||
|
||
The number of per-HART VS-level AIA IMSIC pages to be emulated for a guest
|
||
having AIA IMSIC (i.e. "aia=aplic-imsic" selected). When not specified,
|
||
the default number of per-HART VS-level AIA IMSIC pages is 0.
|
||
|
||
Running Linux kernel
|
||
--------------------
|
||
|
||
Linux mainline v5.12 release is tested at the time of writing. To build a
|
||
Linux mainline kernel that can be booted by the ``virt`` machine in
|
||
64-bit mode, simply configure the kernel using the defconfig configuration:
|
||
|
||
.. code-block:: bash
|
||
|
||
$ export ARCH=riscv
|
||
$ export CROSS_COMPILE=riscv64-linux-
|
||
$ make defconfig
|
||
$ make
|
||
|
||
To boot the newly built Linux kernel in QEMU with the ``virt`` machine:
|
||
|
||
.. code-block:: bash
|
||
|
||
$ qemu-system-riscv64 -M virt -smp 4 -m 2G \
|
||
-display none -serial stdio \
|
||
-kernel arch/riscv/boot/Image \
|
||
-initrd /path/to/rootfs.cpio \
|
||
-append "root=/dev/ram"
|
||
|
||
To build a Linux mainline kernel that can be booted by the ``virt`` machine
|
||
in 32-bit mode, use the rv32_defconfig configuration. A patch is required to
|
||
fix the 32-bit boot issue for Linux kernel v5.12.
|
||
|
||
.. code-block:: bash
|
||
|
||
$ export ARCH=riscv
|
||
$ export CROSS_COMPILE=riscv64-linux-
|
||
$ curl https://patchwork.kernel.org/project/linux-riscv/patch/20210627135117.28641-1-bmeng.cn@gmail.com/mbox/ > riscv.patch
|
||
$ git am riscv.patch
|
||
$ make rv32_defconfig
|
||
$ make
|
||
|
||
Replace ``qemu-system-riscv64`` with ``qemu-system-riscv32`` in the command
|
||
line above to boot the 32-bit Linux kernel. A rootfs image containing 32-bit
|
||
applications shall be used in order for kernel to boot to user space.
|
||
|
||
Running U-Boot
|
||
--------------
|
||
|
||
U-Boot mainline v2021.04 release is tested at the time of writing. To build an
|
||
S-mode U-Boot bootloader that can be booted by the ``virt`` machine, use
|
||
the qemu-riscv64_smode_defconfig with similar commands as described above for Linux:
|
||
|
||
.. code-block:: bash
|
||
|
||
$ export CROSS_COMPILE=riscv64-linux-
|
||
$ make qemu-riscv64_smode_defconfig
|
||
|
||
Boot the 64-bit U-Boot S-mode image directly:
|
||
|
||
.. code-block:: bash
|
||
|
||
$ qemu-system-riscv64 -M virt -smp 4 -m 2G \
|
||
-display none -serial stdio \
|
||
-kernel /path/to/u-boot.bin
|
||
|
||
To test booting U-Boot SPL which in M-mode, which in turn loads a FIT image
|
||
that bundles OpenSBI fw_dynamic firmware and U-Boot proper (S-mode) together,
|
||
build the U-Boot images using riscv64_spl_defconfig:
|
||
|
||
.. code-block:: bash
|
||
|
||
$ export CROSS_COMPILE=riscv64-linux-
|
||
$ export OPENSBI=/path/to/opensbi-riscv64-generic-fw_dynamic.bin
|
||
$ make qemu-riscv64_spl_defconfig
|
||
|
||
The minimal QEMU commands to run U-Boot SPL are:
|
||
|
||
.. code-block:: bash
|
||
|
||
$ qemu-system-riscv64 -M virt -smp 4 -m 2G \
|
||
-display none -serial stdio \
|
||
-bios /path/to/u-boot-spl \
|
||
-device loader,file=/path/to/u-boot.itb,addr=0x80200000
|
||
|
||
To test 32-bit U-Boot images, switch to use qemu-riscv32_smode_defconfig and
|
||
riscv32_spl_defconfig builds, and replace ``qemu-system-riscv64`` with
|
||
``qemu-system-riscv32`` in the command lines above to boot the 32-bit U-Boot.
|
||
|
||
Enabling TPM
|
||
------------
|
||
|
||
A TPM device can be connected to the virt board by following the steps below.
|
||
|
||
First launch the TPM emulator:
|
||
|
||
.. code-block:: bash
|
||
|
||
$ swtpm socket --tpm2 -t -d --tpmstate dir=/tmp/tpm \
|
||
--ctrl type=unixio,path=swtpm-sock
|
||
|
||
Then launch QEMU with some additional arguments to link a TPM device to the backend:
|
||
|
||
.. code-block:: bash
|
||
|
||
$ qemu-system-riscv64 \
|
||
... other args .... \
|
||
-chardev socket,id=chrtpm,path=swtpm-sock \
|
||
-tpmdev emulator,id=tpm0,chardev=chrtpm \
|
||
-device tpm-tis-device,tpmdev=tpm0
|
||
|
||
The TPM device can be seen in the memory tree and the generated device
|
||
tree and should be accessible from the guest software.
|