35579b523c
This commit from nearly 10 years ago is now broken due to the improvements in esp emulation (or perhaps was never correct). It shows up as a bug in detecting the CDROM drive under MacOS. The error is caused by the MacOS CDROM driver sending this CDB with an "S without ATN" command and without DMA: 0x12 0x00 0x00 0x00 0x05 0x00 (INQUIRY) This is a valid INQUIRY command, however with this logic present the 3rd byte (0x0) is copied over the 1st byte (0x12) which silently converts the INQUIRY command to a TEST UNIT READY command before passing it to the QEMU SCSI layer. Since the TEST UNIT READY command has a zero length response the MacOS CDROM driver never receives a response and assumes the CDROM is not present. The logic was to ignore the IDENTIFY byte and copy the LUN over from the CDB, which did store the LUN in bits 5-7 of the second byte in olden times. This however is all obsolete, so just drop the code. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Message-Id: <20210519100803.10293-5-mark.cave-ayland@ilande.co.uk> [Tweaked commit message. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
1408 lines
37 KiB
C
1408 lines
37 KiB
C
/*
|
|
* QEMU ESP/NCR53C9x emulation
|
|
*
|
|
* Copyright (c) 2005-2006 Fabrice Bellard
|
|
* Copyright (c) 2012 Herve Poussineau
|
|
*
|
|
* Permission is hereby granted, free of charge, to any person obtaining a copy
|
|
* of this software and associated documentation files (the "Software"), to deal
|
|
* in the Software without restriction, including without limitation the rights
|
|
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
|
|
* copies of the Software, and to permit persons to whom the Software is
|
|
* furnished to do so, subject to the following conditions:
|
|
*
|
|
* The above copyright notice and this permission notice shall be included in
|
|
* all copies or substantial portions of the Software.
|
|
*
|
|
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
|
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
|
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
|
|
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
|
|
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
|
|
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
|
|
* THE SOFTWARE.
|
|
*/
|
|
|
|
#include "qemu/osdep.h"
|
|
#include "hw/sysbus.h"
|
|
#include "migration/vmstate.h"
|
|
#include "hw/irq.h"
|
|
#include "hw/scsi/esp.h"
|
|
#include "trace.h"
|
|
#include "qemu/log.h"
|
|
#include "qemu/module.h"
|
|
|
|
/*
|
|
* On Sparc32, this is the ESP (NCR53C90) part of chip STP2000 (Master I/O),
|
|
* also produced as NCR89C100. See
|
|
* http://www.ibiblio.org/pub/historic-linux/early-ports/Sparc/NCR/NCR89C100.txt
|
|
* and
|
|
* http://www.ibiblio.org/pub/historic-linux/early-ports/Sparc/NCR/NCR53C9X.txt
|
|
*
|
|
* On Macintosh Quadra it is a NCR53C96.
|
|
*/
|
|
|
|
static void esp_raise_irq(ESPState *s)
|
|
{
|
|
if (!(s->rregs[ESP_RSTAT] & STAT_INT)) {
|
|
s->rregs[ESP_RSTAT] |= STAT_INT;
|
|
qemu_irq_raise(s->irq);
|
|
trace_esp_raise_irq();
|
|
}
|
|
}
|
|
|
|
static void esp_lower_irq(ESPState *s)
|
|
{
|
|
if (s->rregs[ESP_RSTAT] & STAT_INT) {
|
|
s->rregs[ESP_RSTAT] &= ~STAT_INT;
|
|
qemu_irq_lower(s->irq);
|
|
trace_esp_lower_irq();
|
|
}
|
|
}
|
|
|
|
static void esp_raise_drq(ESPState *s)
|
|
{
|
|
qemu_irq_raise(s->irq_data);
|
|
trace_esp_raise_drq();
|
|
}
|
|
|
|
static void esp_lower_drq(ESPState *s)
|
|
{
|
|
qemu_irq_lower(s->irq_data);
|
|
trace_esp_lower_drq();
|
|
}
|
|
|
|
void esp_dma_enable(ESPState *s, int irq, int level)
|
|
{
|
|
if (level) {
|
|
s->dma_enabled = 1;
|
|
trace_esp_dma_enable();
|
|
if (s->dma_cb) {
|
|
s->dma_cb(s);
|
|
s->dma_cb = NULL;
|
|
}
|
|
} else {
|
|
trace_esp_dma_disable();
|
|
s->dma_enabled = 0;
|
|
}
|
|
}
|
|
|
|
void esp_request_cancelled(SCSIRequest *req)
|
|
{
|
|
ESPState *s = req->hba_private;
|
|
|
|
if (req == s->current_req) {
|
|
scsi_req_unref(s->current_req);
|
|
s->current_req = NULL;
|
|
s->current_dev = NULL;
|
|
s->async_len = 0;
|
|
}
|
|
}
|
|
|
|
static void esp_fifo_push(Fifo8 *fifo, uint8_t val)
|
|
{
|
|
if (fifo8_num_used(fifo) == fifo->capacity) {
|
|
trace_esp_error_fifo_overrun();
|
|
return;
|
|
}
|
|
|
|
fifo8_push(fifo, val);
|
|
}
|
|
|
|
static uint8_t esp_fifo_pop(Fifo8 *fifo)
|
|
{
|
|
if (fifo8_is_empty(fifo)) {
|
|
return 0;
|
|
}
|
|
|
|
return fifo8_pop(fifo);
|
|
}
|
|
|
|
static uint32_t esp_fifo_pop_buf(Fifo8 *fifo, uint8_t *dest, int maxlen)
|
|
{
|
|
const uint8_t *buf;
|
|
uint32_t n;
|
|
|
|
if (maxlen == 0) {
|
|
return 0;
|
|
}
|
|
|
|
buf = fifo8_pop_buf(fifo, maxlen, &n);
|
|
if (dest) {
|
|
memcpy(dest, buf, n);
|
|
}
|
|
|
|
return n;
|
|
}
|
|
|
|
static uint32_t esp_get_tc(ESPState *s)
|
|
{
|
|
uint32_t dmalen;
|
|
|
|
dmalen = s->rregs[ESP_TCLO];
|
|
dmalen |= s->rregs[ESP_TCMID] << 8;
|
|
dmalen |= s->rregs[ESP_TCHI] << 16;
|
|
|
|
return dmalen;
|
|
}
|
|
|
|
static void esp_set_tc(ESPState *s, uint32_t dmalen)
|
|
{
|
|
s->rregs[ESP_TCLO] = dmalen;
|
|
s->rregs[ESP_TCMID] = dmalen >> 8;
|
|
s->rregs[ESP_TCHI] = dmalen >> 16;
|
|
}
|
|
|
|
static uint32_t esp_get_stc(ESPState *s)
|
|
{
|
|
uint32_t dmalen;
|
|
|
|
dmalen = s->wregs[ESP_TCLO];
|
|
dmalen |= s->wregs[ESP_TCMID] << 8;
|
|
dmalen |= s->wregs[ESP_TCHI] << 16;
|
|
|
|
return dmalen;
|
|
}
|
|
|
|
static uint8_t esp_pdma_read(ESPState *s)
|
|
{
|
|
uint8_t val;
|
|
|
|
if (s->do_cmd) {
|
|
val = esp_fifo_pop(&s->cmdfifo);
|
|
} else {
|
|
val = esp_fifo_pop(&s->fifo);
|
|
}
|
|
|
|
return val;
|
|
}
|
|
|
|
static void esp_pdma_write(ESPState *s, uint8_t val)
|
|
{
|
|
uint32_t dmalen = esp_get_tc(s);
|
|
|
|
if (dmalen == 0) {
|
|
return;
|
|
}
|
|
|
|
if (s->do_cmd) {
|
|
esp_fifo_push(&s->cmdfifo, val);
|
|
} else {
|
|
esp_fifo_push(&s->fifo, val);
|
|
}
|
|
|
|
dmalen--;
|
|
esp_set_tc(s, dmalen);
|
|
}
|
|
|
|
static int esp_select(ESPState *s)
|
|
{
|
|
int target;
|
|
|
|
target = s->wregs[ESP_WBUSID] & BUSID_DID;
|
|
|
|
s->ti_size = 0;
|
|
fifo8_reset(&s->fifo);
|
|
|
|
if (s->current_req) {
|
|
/* Started a new command before the old one finished. Cancel it. */
|
|
scsi_req_cancel(s->current_req);
|
|
}
|
|
|
|
s->current_dev = scsi_device_find(&s->bus, 0, target, 0);
|
|
if (!s->current_dev) {
|
|
/* No such drive */
|
|
s->rregs[ESP_RSTAT] = 0;
|
|
s->rregs[ESP_RINTR] = INTR_DC;
|
|
s->rregs[ESP_RSEQ] = SEQ_0;
|
|
esp_raise_irq(s);
|
|
return -1;
|
|
}
|
|
|
|
/*
|
|
* Note that we deliberately don't raise the IRQ here: this will be done
|
|
* either in do_busid_cmd() for DATA OUT transfers or by the deferred
|
|
* IRQ mechanism in esp_transfer_data() for DATA IN transfers
|
|
*/
|
|
s->rregs[ESP_RINTR] |= INTR_FC;
|
|
s->rregs[ESP_RSEQ] = SEQ_CD;
|
|
return 0;
|
|
}
|
|
|
|
static uint32_t get_cmd(ESPState *s, uint32_t maxlen)
|
|
{
|
|
uint8_t buf[ESP_CMDFIFO_SZ];
|
|
uint32_t dmalen, n;
|
|
int target;
|
|
|
|
target = s->wregs[ESP_WBUSID] & BUSID_DID;
|
|
if (s->dma) {
|
|
dmalen = MIN(esp_get_tc(s), maxlen);
|
|
if (dmalen == 0) {
|
|
return 0;
|
|
}
|
|
if (s->dma_memory_read) {
|
|
s->dma_memory_read(s->dma_opaque, buf, dmalen);
|
|
dmalen = MIN(fifo8_num_free(&s->cmdfifo), dmalen);
|
|
fifo8_push_all(&s->cmdfifo, buf, dmalen);
|
|
} else {
|
|
if (esp_select(s) < 0) {
|
|
fifo8_reset(&s->cmdfifo);
|
|
return -1;
|
|
}
|
|
esp_raise_drq(s);
|
|
fifo8_reset(&s->cmdfifo);
|
|
return 0;
|
|
}
|
|
} else {
|
|
dmalen = MIN(fifo8_num_used(&s->fifo), maxlen);
|
|
if (dmalen == 0) {
|
|
return 0;
|
|
}
|
|
n = esp_fifo_pop_buf(&s->fifo, buf, dmalen);
|
|
n = MIN(fifo8_num_free(&s->cmdfifo), n);
|
|
fifo8_push_all(&s->cmdfifo, buf, n);
|
|
}
|
|
trace_esp_get_cmd(dmalen, target);
|
|
|
|
if (esp_select(s) < 0) {
|
|
fifo8_reset(&s->cmdfifo);
|
|
return -1;
|
|
}
|
|
return dmalen;
|
|
}
|
|
|
|
static void do_busid_cmd(ESPState *s, uint8_t busid)
|
|
{
|
|
uint32_t cmdlen;
|
|
int32_t datalen;
|
|
int lun;
|
|
SCSIDevice *current_lun;
|
|
uint8_t buf[ESP_CMDFIFO_SZ];
|
|
|
|
trace_esp_do_busid_cmd(busid);
|
|
lun = busid & 7;
|
|
cmdlen = fifo8_num_used(&s->cmdfifo);
|
|
if (!cmdlen || !s->current_dev) {
|
|
return;
|
|
}
|
|
esp_fifo_pop_buf(&s->cmdfifo, buf, cmdlen);
|
|
|
|
current_lun = scsi_device_find(&s->bus, 0, s->current_dev->id, lun);
|
|
s->current_req = scsi_req_new(current_lun, 0, lun, buf, s);
|
|
datalen = scsi_req_enqueue(s->current_req);
|
|
s->ti_size = datalen;
|
|
fifo8_reset(&s->cmdfifo);
|
|
if (datalen != 0) {
|
|
s->rregs[ESP_RSTAT] = STAT_TC;
|
|
s->rregs[ESP_RSEQ] = SEQ_CD;
|
|
s->ti_cmd = 0;
|
|
esp_set_tc(s, 0);
|
|
if (datalen > 0) {
|
|
/*
|
|
* Switch to DATA IN phase but wait until initial data xfer is
|
|
* complete before raising the command completion interrupt
|
|
*/
|
|
s->data_in_ready = false;
|
|
s->rregs[ESP_RSTAT] |= STAT_DI;
|
|
} else {
|
|
s->rregs[ESP_RSTAT] |= STAT_DO;
|
|
s->rregs[ESP_RINTR] |= INTR_BS | INTR_FC;
|
|
esp_raise_irq(s);
|
|
esp_lower_drq(s);
|
|
}
|
|
scsi_req_continue(s->current_req);
|
|
return;
|
|
}
|
|
}
|
|
|
|
static void do_cmd(ESPState *s)
|
|
{
|
|
uint8_t busid = esp_fifo_pop(&s->cmdfifo);
|
|
int len;
|
|
|
|
s->cmdfifo_cdb_offset--;
|
|
|
|
/* Ignore extended messages for now */
|
|
if (s->cmdfifo_cdb_offset) {
|
|
len = MIN(s->cmdfifo_cdb_offset, fifo8_num_used(&s->cmdfifo));
|
|
esp_fifo_pop_buf(&s->cmdfifo, NULL, len);
|
|
s->cmdfifo_cdb_offset = 0;
|
|
}
|
|
|
|
do_busid_cmd(s, busid);
|
|
}
|
|
|
|
static void satn_pdma_cb(ESPState *s)
|
|
{
|
|
if (!esp_get_tc(s) && !fifo8_is_empty(&s->cmdfifo)) {
|
|
s->cmdfifo_cdb_offset = 1;
|
|
s->do_cmd = 0;
|
|
do_cmd(s);
|
|
}
|
|
}
|
|
|
|
static void handle_satn(ESPState *s)
|
|
{
|
|
int32_t cmdlen;
|
|
|
|
if (s->dma && !s->dma_enabled) {
|
|
s->dma_cb = handle_satn;
|
|
return;
|
|
}
|
|
s->pdma_cb = satn_pdma_cb;
|
|
cmdlen = get_cmd(s, ESP_CMDFIFO_SZ);
|
|
if (cmdlen > 0) {
|
|
s->cmdfifo_cdb_offset = 1;
|
|
s->do_cmd = 0;
|
|
do_cmd(s);
|
|
} else if (cmdlen == 0) {
|
|
s->do_cmd = 1;
|
|
/* Target present, but no cmd yet - switch to command phase */
|
|
s->rregs[ESP_RSEQ] = SEQ_CD;
|
|
s->rregs[ESP_RSTAT] = STAT_CD;
|
|
}
|
|
}
|
|
|
|
static void s_without_satn_pdma_cb(ESPState *s)
|
|
{
|
|
if (!esp_get_tc(s) && !fifo8_is_empty(&s->cmdfifo)) {
|
|
s->cmdfifo_cdb_offset = 0;
|
|
s->do_cmd = 0;
|
|
do_busid_cmd(s, 0);
|
|
}
|
|
}
|
|
|
|
static void handle_s_without_atn(ESPState *s)
|
|
{
|
|
int32_t cmdlen;
|
|
|
|
if (s->dma && !s->dma_enabled) {
|
|
s->dma_cb = handle_s_without_atn;
|
|
return;
|
|
}
|
|
s->pdma_cb = s_without_satn_pdma_cb;
|
|
cmdlen = get_cmd(s, ESP_CMDFIFO_SZ);
|
|
if (cmdlen > 0) {
|
|
s->cmdfifo_cdb_offset = 0;
|
|
s->do_cmd = 0;
|
|
do_busid_cmd(s, 0);
|
|
} else if (cmdlen == 0) {
|
|
s->do_cmd = 1;
|
|
/* Target present, but no cmd yet - switch to command phase */
|
|
s->rregs[ESP_RSEQ] = SEQ_CD;
|
|
s->rregs[ESP_RSTAT] = STAT_CD;
|
|
}
|
|
}
|
|
|
|
static void satn_stop_pdma_cb(ESPState *s)
|
|
{
|
|
if (!esp_get_tc(s) && !fifo8_is_empty(&s->cmdfifo)) {
|
|
trace_esp_handle_satn_stop(fifo8_num_used(&s->cmdfifo));
|
|
s->do_cmd = 1;
|
|
s->cmdfifo_cdb_offset = 1;
|
|
s->rregs[ESP_RSTAT] = STAT_TC | STAT_CD;
|
|
s->rregs[ESP_RINTR] |= INTR_BS | INTR_FC;
|
|
s->rregs[ESP_RSEQ] = SEQ_CD;
|
|
esp_raise_irq(s);
|
|
}
|
|
}
|
|
|
|
static void handle_satn_stop(ESPState *s)
|
|
{
|
|
int32_t cmdlen;
|
|
|
|
if (s->dma && !s->dma_enabled) {
|
|
s->dma_cb = handle_satn_stop;
|
|
return;
|
|
}
|
|
s->pdma_cb = satn_stop_pdma_cb;
|
|
cmdlen = get_cmd(s, 1);
|
|
if (cmdlen > 0) {
|
|
trace_esp_handle_satn_stop(fifo8_num_used(&s->cmdfifo));
|
|
s->do_cmd = 1;
|
|
s->cmdfifo_cdb_offset = 1;
|
|
s->rregs[ESP_RSTAT] = STAT_MO;
|
|
s->rregs[ESP_RINTR] |= INTR_BS | INTR_FC;
|
|
s->rregs[ESP_RSEQ] = SEQ_MO;
|
|
esp_raise_irq(s);
|
|
} else if (cmdlen == 0) {
|
|
s->do_cmd = 1;
|
|
/* Target present, switch to message out phase */
|
|
s->rregs[ESP_RSEQ] = SEQ_MO;
|
|
s->rregs[ESP_RSTAT] = STAT_MO;
|
|
}
|
|
}
|
|
|
|
static void write_response_pdma_cb(ESPState *s)
|
|
{
|
|
s->rregs[ESP_RSTAT] = STAT_TC | STAT_ST;
|
|
s->rregs[ESP_RINTR] |= INTR_BS | INTR_FC;
|
|
s->rregs[ESP_RSEQ] = SEQ_CD;
|
|
esp_raise_irq(s);
|
|
}
|
|
|
|
static void write_response(ESPState *s)
|
|
{
|
|
uint8_t buf[2];
|
|
|
|
trace_esp_write_response(s->status);
|
|
|
|
buf[0] = s->status;
|
|
buf[1] = 0;
|
|
|
|
if (s->dma) {
|
|
if (s->dma_memory_write) {
|
|
s->dma_memory_write(s->dma_opaque, buf, 2);
|
|
s->rregs[ESP_RSTAT] = STAT_TC | STAT_ST;
|
|
s->rregs[ESP_RINTR] |= INTR_BS | INTR_FC;
|
|
s->rregs[ESP_RSEQ] = SEQ_CD;
|
|
} else {
|
|
s->pdma_cb = write_response_pdma_cb;
|
|
esp_raise_drq(s);
|
|
return;
|
|
}
|
|
} else {
|
|
fifo8_reset(&s->fifo);
|
|
fifo8_push_all(&s->fifo, buf, 2);
|
|
s->rregs[ESP_RFLAGS] = 2;
|
|
}
|
|
esp_raise_irq(s);
|
|
}
|
|
|
|
static void esp_dma_done(ESPState *s)
|
|
{
|
|
s->rregs[ESP_RSTAT] |= STAT_TC;
|
|
s->rregs[ESP_RINTR] |= INTR_BS;
|
|
s->rregs[ESP_RFLAGS] = 0;
|
|
esp_set_tc(s, 0);
|
|
esp_raise_irq(s);
|
|
}
|
|
|
|
static void do_dma_pdma_cb(ESPState *s)
|
|
{
|
|
int to_device = ((s->rregs[ESP_RSTAT] & 7) == STAT_DO);
|
|
int len;
|
|
uint32_t n;
|
|
|
|
if (s->do_cmd) {
|
|
/* Ensure we have received complete command after SATN and stop */
|
|
if (esp_get_tc(s) || fifo8_is_empty(&s->cmdfifo)) {
|
|
return;
|
|
}
|
|
|
|
s->ti_size = 0;
|
|
s->do_cmd = 0;
|
|
do_cmd(s);
|
|
esp_lower_drq(s);
|
|
return;
|
|
}
|
|
|
|
if (!s->current_req) {
|
|
return;
|
|
}
|
|
|
|
if (to_device) {
|
|
/* Copy FIFO data to device */
|
|
len = MIN(s->async_len, ESP_FIFO_SZ);
|
|
len = MIN(len, fifo8_num_used(&s->fifo));
|
|
n = esp_fifo_pop_buf(&s->fifo, s->async_buf, len);
|
|
s->async_buf += n;
|
|
s->async_len -= n;
|
|
s->ti_size += n;
|
|
|
|
if (n < len) {
|
|
/* Unaligned accesses can cause FIFO wraparound */
|
|
len = len - n;
|
|
n = esp_fifo_pop_buf(&s->fifo, s->async_buf, len);
|
|
s->async_buf += n;
|
|
s->async_len -= n;
|
|
s->ti_size += n;
|
|
}
|
|
|
|
if (s->async_len == 0) {
|
|
scsi_req_continue(s->current_req);
|
|
return;
|
|
}
|
|
|
|
if (esp_get_tc(s) == 0) {
|
|
esp_lower_drq(s);
|
|
esp_dma_done(s);
|
|
}
|
|
|
|
return;
|
|
} else {
|
|
if (s->async_len == 0) {
|
|
/* Defer until the scsi layer has completed */
|
|
scsi_req_continue(s->current_req);
|
|
s->data_in_ready = false;
|
|
return;
|
|
}
|
|
|
|
if (esp_get_tc(s) != 0) {
|
|
/* Copy device data to FIFO */
|
|
len = MIN(s->async_len, esp_get_tc(s));
|
|
len = MIN(len, fifo8_num_free(&s->fifo));
|
|
fifo8_push_all(&s->fifo, s->async_buf, len);
|
|
s->async_buf += len;
|
|
s->async_len -= len;
|
|
s->ti_size -= len;
|
|
esp_set_tc(s, esp_get_tc(s) - len);
|
|
|
|
if (esp_get_tc(s) == 0) {
|
|
/* Indicate transfer to FIFO is complete */
|
|
s->rregs[ESP_RSTAT] |= STAT_TC;
|
|
}
|
|
return;
|
|
}
|
|
|
|
/* Partially filled a scsi buffer. Complete immediately. */
|
|
esp_lower_drq(s);
|
|
esp_dma_done(s);
|
|
}
|
|
}
|
|
|
|
static void esp_do_dma(ESPState *s)
|
|
{
|
|
uint32_t len, cmdlen;
|
|
int to_device = ((s->rregs[ESP_RSTAT] & 7) == STAT_DO);
|
|
uint8_t buf[ESP_CMDFIFO_SZ];
|
|
|
|
len = esp_get_tc(s);
|
|
if (s->do_cmd) {
|
|
/*
|
|
* handle_ti_cmd() case: esp_do_dma() is called only from
|
|
* handle_ti_cmd() with do_cmd != NULL (see the assert())
|
|
*/
|
|
cmdlen = fifo8_num_used(&s->cmdfifo);
|
|
trace_esp_do_dma(cmdlen, len);
|
|
if (s->dma_memory_read) {
|
|
len = MIN(len, fifo8_num_free(&s->cmdfifo));
|
|
s->dma_memory_read(s->dma_opaque, buf, len);
|
|
fifo8_push_all(&s->cmdfifo, buf, len);
|
|
} else {
|
|
s->pdma_cb = do_dma_pdma_cb;
|
|
esp_raise_drq(s);
|
|
return;
|
|
}
|
|
trace_esp_handle_ti_cmd(cmdlen);
|
|
s->ti_size = 0;
|
|
if ((s->rregs[ESP_RSTAT] & 7) == STAT_CD) {
|
|
/* No command received */
|
|
if (s->cmdfifo_cdb_offset == fifo8_num_used(&s->cmdfifo)) {
|
|
return;
|
|
}
|
|
|
|
/* Command has been received */
|
|
s->do_cmd = 0;
|
|
do_cmd(s);
|
|
} else {
|
|
/*
|
|
* Extra message out bytes received: update cmdfifo_cdb_offset
|
|
* and then switch to commmand phase
|
|
*/
|
|
s->cmdfifo_cdb_offset = fifo8_num_used(&s->cmdfifo);
|
|
s->rregs[ESP_RSTAT] = STAT_TC | STAT_CD;
|
|
s->rregs[ESP_RSEQ] = SEQ_CD;
|
|
s->rregs[ESP_RINTR] |= INTR_BS;
|
|
esp_raise_irq(s);
|
|
}
|
|
return;
|
|
}
|
|
if (!s->current_req) {
|
|
return;
|
|
}
|
|
if (s->async_len == 0) {
|
|
/* Defer until data is available. */
|
|
return;
|
|
}
|
|
if (len > s->async_len) {
|
|
len = s->async_len;
|
|
}
|
|
if (to_device) {
|
|
if (s->dma_memory_read) {
|
|
s->dma_memory_read(s->dma_opaque, s->async_buf, len);
|
|
} else {
|
|
s->pdma_cb = do_dma_pdma_cb;
|
|
esp_raise_drq(s);
|
|
return;
|
|
}
|
|
} else {
|
|
if (s->dma_memory_write) {
|
|
s->dma_memory_write(s->dma_opaque, s->async_buf, len);
|
|
} else {
|
|
/* Adjust TC for any leftover data in the FIFO */
|
|
if (!fifo8_is_empty(&s->fifo)) {
|
|
esp_set_tc(s, esp_get_tc(s) - fifo8_num_used(&s->fifo));
|
|
}
|
|
|
|
/* Copy device data to FIFO */
|
|
len = MIN(len, fifo8_num_free(&s->fifo));
|
|
fifo8_push_all(&s->fifo, s->async_buf, len);
|
|
s->async_buf += len;
|
|
s->async_len -= len;
|
|
s->ti_size -= len;
|
|
|
|
/*
|
|
* MacOS toolbox uses a TI length of 16 bytes for all commands, so
|
|
* commands shorter than this must be padded accordingly
|
|
*/
|
|
if (len < esp_get_tc(s) && esp_get_tc(s) <= ESP_FIFO_SZ) {
|
|
while (fifo8_num_used(&s->fifo) < ESP_FIFO_SZ) {
|
|
esp_fifo_push(&s->fifo, 0);
|
|
len++;
|
|
}
|
|
}
|
|
|
|
esp_set_tc(s, esp_get_tc(s) - len);
|
|
s->pdma_cb = do_dma_pdma_cb;
|
|
esp_raise_drq(s);
|
|
|
|
/* Indicate transfer to FIFO is complete */
|
|
s->rregs[ESP_RSTAT] |= STAT_TC;
|
|
return;
|
|
}
|
|
}
|
|
esp_set_tc(s, esp_get_tc(s) - len);
|
|
s->async_buf += len;
|
|
s->async_len -= len;
|
|
if (to_device) {
|
|
s->ti_size += len;
|
|
} else {
|
|
s->ti_size -= len;
|
|
}
|
|
if (s->async_len == 0) {
|
|
scsi_req_continue(s->current_req);
|
|
/*
|
|
* If there is still data to be read from the device then
|
|
* complete the DMA operation immediately. Otherwise defer
|
|
* until the scsi layer has completed.
|
|
*/
|
|
if (to_device || esp_get_tc(s) != 0 || s->ti_size == 0) {
|
|
return;
|
|
}
|
|
}
|
|
|
|
/* Partially filled a scsi buffer. Complete immediately. */
|
|
esp_dma_done(s);
|
|
esp_lower_drq(s);
|
|
}
|
|
|
|
static void esp_do_nodma(ESPState *s)
|
|
{
|
|
int to_device = ((s->rregs[ESP_RSTAT] & 7) == STAT_DO);
|
|
uint32_t cmdlen;
|
|
int len;
|
|
|
|
if (s->do_cmd) {
|
|
cmdlen = fifo8_num_used(&s->cmdfifo);
|
|
trace_esp_handle_ti_cmd(cmdlen);
|
|
s->ti_size = 0;
|
|
if ((s->rregs[ESP_RSTAT] & 7) == STAT_CD) {
|
|
/* No command received */
|
|
if (s->cmdfifo_cdb_offset == fifo8_num_used(&s->cmdfifo)) {
|
|
return;
|
|
}
|
|
|
|
/* Command has been received */
|
|
s->do_cmd = 0;
|
|
do_cmd(s);
|
|
} else {
|
|
/*
|
|
* Extra message out bytes received: update cmdfifo_cdb_offset
|
|
* and then switch to commmand phase
|
|
*/
|
|
s->cmdfifo_cdb_offset = fifo8_num_used(&s->cmdfifo);
|
|
s->rregs[ESP_RSTAT] = STAT_TC | STAT_CD;
|
|
s->rregs[ESP_RSEQ] = SEQ_CD;
|
|
s->rregs[ESP_RINTR] |= INTR_BS;
|
|
esp_raise_irq(s);
|
|
}
|
|
return;
|
|
}
|
|
|
|
if (!s->current_req) {
|
|
return;
|
|
}
|
|
|
|
if (s->async_len == 0) {
|
|
/* Defer until data is available. */
|
|
return;
|
|
}
|
|
|
|
if (to_device) {
|
|
len = MIN(fifo8_num_used(&s->fifo), ESP_FIFO_SZ);
|
|
esp_fifo_pop_buf(&s->fifo, s->async_buf, len);
|
|
s->async_buf += len;
|
|
s->async_len -= len;
|
|
s->ti_size += len;
|
|
} else {
|
|
if (fifo8_is_empty(&s->fifo)) {
|
|
fifo8_push(&s->fifo, s->async_buf[0]);
|
|
s->async_buf++;
|
|
s->async_len--;
|
|
s->ti_size--;
|
|
}
|
|
}
|
|
|
|
if (s->async_len == 0) {
|
|
scsi_req_continue(s->current_req);
|
|
return;
|
|
}
|
|
|
|
s->rregs[ESP_RINTR] |= INTR_BS;
|
|
esp_raise_irq(s);
|
|
}
|
|
|
|
void esp_command_complete(SCSIRequest *req, size_t resid)
|
|
{
|
|
ESPState *s = req->hba_private;
|
|
int to_device = ((s->rregs[ESP_RSTAT] & 7) == STAT_DO);
|
|
|
|
trace_esp_command_complete();
|
|
|
|
/*
|
|
* Non-DMA transfers from the target will leave the last byte in
|
|
* the FIFO so don't reset ti_size in this case
|
|
*/
|
|
if (s->dma || to_device) {
|
|
if (s->ti_size != 0) {
|
|
trace_esp_command_complete_unexpected();
|
|
}
|
|
s->ti_size = 0;
|
|
}
|
|
|
|
s->async_len = 0;
|
|
if (req->status) {
|
|
trace_esp_command_complete_fail();
|
|
}
|
|
s->status = req->status;
|
|
|
|
/*
|
|
* If the transfer is finished, switch to status phase. For non-DMA
|
|
* transfers from the target the last byte is still in the FIFO
|
|
*/
|
|
if (s->ti_size == 0) {
|
|
s->rregs[ESP_RSTAT] = STAT_TC | STAT_ST;
|
|
esp_dma_done(s);
|
|
esp_lower_drq(s);
|
|
}
|
|
|
|
if (s->current_req) {
|
|
scsi_req_unref(s->current_req);
|
|
s->current_req = NULL;
|
|
s->current_dev = NULL;
|
|
}
|
|
}
|
|
|
|
void esp_transfer_data(SCSIRequest *req, uint32_t len)
|
|
{
|
|
ESPState *s = req->hba_private;
|
|
int to_device = ((s->rregs[ESP_RSTAT] & 7) == STAT_DO);
|
|
uint32_t dmalen = esp_get_tc(s);
|
|
|
|
assert(!s->do_cmd);
|
|
trace_esp_transfer_data(dmalen, s->ti_size);
|
|
s->async_len = len;
|
|
s->async_buf = scsi_req_get_buf(req);
|
|
|
|
if (!to_device && !s->data_in_ready) {
|
|
/*
|
|
* Initial incoming data xfer is complete so raise command
|
|
* completion interrupt
|
|
*/
|
|
s->data_in_ready = true;
|
|
s->rregs[ESP_RSTAT] |= STAT_TC;
|
|
s->rregs[ESP_RINTR] |= INTR_BS;
|
|
esp_raise_irq(s);
|
|
}
|
|
|
|
if (s->ti_cmd == 0) {
|
|
/*
|
|
* Always perform the initial transfer upon reception of the next TI
|
|
* command to ensure the DMA/non-DMA status of the command is correct.
|
|
* It is not possible to use s->dma directly in the section below as
|
|
* some OSs send non-DMA NOP commands after a DMA transfer. Hence if the
|
|
* async data transfer is delayed then s->dma is set incorrectly.
|
|
*/
|
|
return;
|
|
}
|
|
|
|
if (s->ti_cmd == (CMD_TI | CMD_DMA)) {
|
|
if (dmalen) {
|
|
esp_do_dma(s);
|
|
} else if (s->ti_size <= 0) {
|
|
/*
|
|
* If this was the last part of a DMA transfer then the
|
|
* completion interrupt is deferred to here.
|
|
*/
|
|
esp_dma_done(s);
|
|
esp_lower_drq(s);
|
|
}
|
|
} else if (s->ti_cmd == CMD_TI) {
|
|
esp_do_nodma(s);
|
|
}
|
|
}
|
|
|
|
static void handle_ti(ESPState *s)
|
|
{
|
|
uint32_t dmalen;
|
|
|
|
if (s->dma && !s->dma_enabled) {
|
|
s->dma_cb = handle_ti;
|
|
return;
|
|
}
|
|
|
|
s->ti_cmd = s->rregs[ESP_CMD];
|
|
if (s->dma) {
|
|
dmalen = esp_get_tc(s);
|
|
trace_esp_handle_ti(dmalen);
|
|
s->rregs[ESP_RSTAT] &= ~STAT_TC;
|
|
esp_do_dma(s);
|
|
} else {
|
|
trace_esp_handle_ti(s->ti_size);
|
|
esp_do_nodma(s);
|
|
}
|
|
}
|
|
|
|
void esp_hard_reset(ESPState *s)
|
|
{
|
|
memset(s->rregs, 0, ESP_REGS);
|
|
memset(s->wregs, 0, ESP_REGS);
|
|
s->tchi_written = 0;
|
|
s->ti_size = 0;
|
|
fifo8_reset(&s->fifo);
|
|
fifo8_reset(&s->cmdfifo);
|
|
s->dma = 0;
|
|
s->do_cmd = 0;
|
|
s->dma_cb = NULL;
|
|
|
|
s->rregs[ESP_CFG1] = 7;
|
|
}
|
|
|
|
static void esp_soft_reset(ESPState *s)
|
|
{
|
|
qemu_irq_lower(s->irq);
|
|
qemu_irq_lower(s->irq_data);
|
|
esp_hard_reset(s);
|
|
}
|
|
|
|
static void parent_esp_reset(ESPState *s, int irq, int level)
|
|
{
|
|
if (level) {
|
|
esp_soft_reset(s);
|
|
}
|
|
}
|
|
|
|
uint64_t esp_reg_read(ESPState *s, uint32_t saddr)
|
|
{
|
|
uint32_t val;
|
|
|
|
switch (saddr) {
|
|
case ESP_FIFO:
|
|
if (s->dma_memory_read && s->dma_memory_write &&
|
|
(s->rregs[ESP_RSTAT] & STAT_PIO_MASK) == 0) {
|
|
/* Data out. */
|
|
qemu_log_mask(LOG_UNIMP, "esp: PIO data read not implemented\n");
|
|
s->rregs[ESP_FIFO] = 0;
|
|
} else {
|
|
if ((s->rregs[ESP_RSTAT] & 0x7) == STAT_DI) {
|
|
if (s->ti_size) {
|
|
esp_do_nodma(s);
|
|
} else {
|
|
/*
|
|
* The last byte of a non-DMA transfer has been read out
|
|
* of the FIFO so switch to status phase
|
|
*/
|
|
s->rregs[ESP_RSTAT] = STAT_TC | STAT_ST;
|
|
}
|
|
}
|
|
s->rregs[ESP_FIFO] = esp_fifo_pop(&s->fifo);
|
|
}
|
|
val = s->rregs[ESP_FIFO];
|
|
break;
|
|
case ESP_RINTR:
|
|
/*
|
|
* Clear sequence step, interrupt register and all status bits
|
|
* except TC
|
|
*/
|
|
val = s->rregs[ESP_RINTR];
|
|
s->rregs[ESP_RINTR] = 0;
|
|
s->rregs[ESP_RSTAT] &= ~STAT_TC;
|
|
/*
|
|
* According to the datasheet ESP_RSEQ should be cleared, but as the
|
|
* emulation currently defers information transfers to the next TI
|
|
* command leave it for now so that pedantic guests such as the old
|
|
* Linux 2.6 driver see the correct flags before the next SCSI phase
|
|
* transition.
|
|
*
|
|
* s->rregs[ESP_RSEQ] = SEQ_0;
|
|
*/
|
|
esp_lower_irq(s);
|
|
break;
|
|
case ESP_TCHI:
|
|
/* Return the unique id if the value has never been written */
|
|
if (!s->tchi_written) {
|
|
val = s->chip_id;
|
|
} else {
|
|
val = s->rregs[saddr];
|
|
}
|
|
break;
|
|
case ESP_RFLAGS:
|
|
/* Bottom 5 bits indicate number of bytes in FIFO */
|
|
val = fifo8_num_used(&s->fifo);
|
|
break;
|
|
default:
|
|
val = s->rregs[saddr];
|
|
break;
|
|
}
|
|
|
|
trace_esp_mem_readb(saddr, val);
|
|
return val;
|
|
}
|
|
|
|
void esp_reg_write(ESPState *s, uint32_t saddr, uint64_t val)
|
|
{
|
|
trace_esp_mem_writeb(saddr, s->wregs[saddr], val);
|
|
switch (saddr) {
|
|
case ESP_TCHI:
|
|
s->tchi_written = true;
|
|
/* fall through */
|
|
case ESP_TCLO:
|
|
case ESP_TCMID:
|
|
s->rregs[ESP_RSTAT] &= ~STAT_TC;
|
|
break;
|
|
case ESP_FIFO:
|
|
if (s->do_cmd) {
|
|
esp_fifo_push(&s->cmdfifo, val);
|
|
|
|
/*
|
|
* If any unexpected message out/command phase data is
|
|
* transferred using non-DMA, raise the interrupt
|
|
*/
|
|
if (s->rregs[ESP_CMD] == CMD_TI) {
|
|
s->rregs[ESP_RINTR] |= INTR_BS;
|
|
esp_raise_irq(s);
|
|
}
|
|
} else {
|
|
esp_fifo_push(&s->fifo, val);
|
|
}
|
|
break;
|
|
case ESP_CMD:
|
|
s->rregs[saddr] = val;
|
|
if (val & CMD_DMA) {
|
|
s->dma = 1;
|
|
/* Reload DMA counter. */
|
|
if (esp_get_stc(s) == 0) {
|
|
esp_set_tc(s, 0x10000);
|
|
} else {
|
|
esp_set_tc(s, esp_get_stc(s));
|
|
}
|
|
} else {
|
|
s->dma = 0;
|
|
}
|
|
switch (val & CMD_CMD) {
|
|
case CMD_NOP:
|
|
trace_esp_mem_writeb_cmd_nop(val);
|
|
break;
|
|
case CMD_FLUSH:
|
|
trace_esp_mem_writeb_cmd_flush(val);
|
|
fifo8_reset(&s->fifo);
|
|
break;
|
|
case CMD_RESET:
|
|
trace_esp_mem_writeb_cmd_reset(val);
|
|
esp_soft_reset(s);
|
|
break;
|
|
case CMD_BUSRESET:
|
|
trace_esp_mem_writeb_cmd_bus_reset(val);
|
|
if (!(s->wregs[ESP_CFG1] & CFG1_RESREPT)) {
|
|
s->rregs[ESP_RINTR] |= INTR_RST;
|
|
esp_raise_irq(s);
|
|
}
|
|
break;
|
|
case CMD_TI:
|
|
trace_esp_mem_writeb_cmd_ti(val);
|
|
handle_ti(s);
|
|
break;
|
|
case CMD_ICCS:
|
|
trace_esp_mem_writeb_cmd_iccs(val);
|
|
write_response(s);
|
|
s->rregs[ESP_RINTR] |= INTR_FC;
|
|
s->rregs[ESP_RSTAT] |= STAT_MI;
|
|
break;
|
|
case CMD_MSGACC:
|
|
trace_esp_mem_writeb_cmd_msgacc(val);
|
|
s->rregs[ESP_RINTR] |= INTR_DC;
|
|
s->rregs[ESP_RSEQ] = 0;
|
|
s->rregs[ESP_RFLAGS] = 0;
|
|
esp_raise_irq(s);
|
|
break;
|
|
case CMD_PAD:
|
|
trace_esp_mem_writeb_cmd_pad(val);
|
|
s->rregs[ESP_RSTAT] = STAT_TC;
|
|
s->rregs[ESP_RINTR] |= INTR_FC;
|
|
s->rregs[ESP_RSEQ] = 0;
|
|
break;
|
|
case CMD_SATN:
|
|
trace_esp_mem_writeb_cmd_satn(val);
|
|
break;
|
|
case CMD_RSTATN:
|
|
trace_esp_mem_writeb_cmd_rstatn(val);
|
|
break;
|
|
case CMD_SEL:
|
|
trace_esp_mem_writeb_cmd_sel(val);
|
|
handle_s_without_atn(s);
|
|
break;
|
|
case CMD_SELATN:
|
|
trace_esp_mem_writeb_cmd_selatn(val);
|
|
handle_satn(s);
|
|
break;
|
|
case CMD_SELATNS:
|
|
trace_esp_mem_writeb_cmd_selatns(val);
|
|
handle_satn_stop(s);
|
|
break;
|
|
case CMD_ENSEL:
|
|
trace_esp_mem_writeb_cmd_ensel(val);
|
|
s->rregs[ESP_RINTR] = 0;
|
|
break;
|
|
case CMD_DISSEL:
|
|
trace_esp_mem_writeb_cmd_dissel(val);
|
|
s->rregs[ESP_RINTR] = 0;
|
|
esp_raise_irq(s);
|
|
break;
|
|
default:
|
|
trace_esp_error_unhandled_command(val);
|
|
break;
|
|
}
|
|
break;
|
|
case ESP_WBUSID ... ESP_WSYNO:
|
|
break;
|
|
case ESP_CFG1:
|
|
case ESP_CFG2: case ESP_CFG3:
|
|
case ESP_RES3: case ESP_RES4:
|
|
s->rregs[saddr] = val;
|
|
break;
|
|
case ESP_WCCF ... ESP_WTEST:
|
|
break;
|
|
default:
|
|
trace_esp_error_invalid_write(val, saddr);
|
|
return;
|
|
}
|
|
s->wregs[saddr] = val;
|
|
}
|
|
|
|
static bool esp_mem_accepts(void *opaque, hwaddr addr,
|
|
unsigned size, bool is_write,
|
|
MemTxAttrs attrs)
|
|
{
|
|
return (size == 1) || (is_write && size == 4);
|
|
}
|
|
|
|
static bool esp_is_before_version_5(void *opaque, int version_id)
|
|
{
|
|
ESPState *s = ESP(opaque);
|
|
|
|
version_id = MIN(version_id, s->mig_version_id);
|
|
return version_id < 5;
|
|
}
|
|
|
|
static bool esp_is_version_5(void *opaque, int version_id)
|
|
{
|
|
ESPState *s = ESP(opaque);
|
|
|
|
version_id = MIN(version_id, s->mig_version_id);
|
|
return version_id == 5;
|
|
}
|
|
|
|
int esp_pre_save(void *opaque)
|
|
{
|
|
ESPState *s = ESP(object_resolve_path_component(
|
|
OBJECT(opaque), "esp"));
|
|
|
|
s->mig_version_id = vmstate_esp.version_id;
|
|
return 0;
|
|
}
|
|
|
|
static int esp_post_load(void *opaque, int version_id)
|
|
{
|
|
ESPState *s = ESP(opaque);
|
|
int len, i;
|
|
|
|
version_id = MIN(version_id, s->mig_version_id);
|
|
|
|
if (version_id < 5) {
|
|
esp_set_tc(s, s->mig_dma_left);
|
|
|
|
/* Migrate ti_buf to fifo */
|
|
len = s->mig_ti_wptr - s->mig_ti_rptr;
|
|
for (i = 0; i < len; i++) {
|
|
fifo8_push(&s->fifo, s->mig_ti_buf[i]);
|
|
}
|
|
|
|
/* Migrate cmdbuf to cmdfifo */
|
|
for (i = 0; i < s->mig_cmdlen; i++) {
|
|
fifo8_push(&s->cmdfifo, s->mig_cmdbuf[i]);
|
|
}
|
|
}
|
|
|
|
s->mig_version_id = vmstate_esp.version_id;
|
|
return 0;
|
|
}
|
|
|
|
const VMStateDescription vmstate_esp = {
|
|
.name = "esp",
|
|
.version_id = 5,
|
|
.minimum_version_id = 3,
|
|
.post_load = esp_post_load,
|
|
.fields = (VMStateField[]) {
|
|
VMSTATE_BUFFER(rregs, ESPState),
|
|
VMSTATE_BUFFER(wregs, ESPState),
|
|
VMSTATE_INT32(ti_size, ESPState),
|
|
VMSTATE_UINT32_TEST(mig_ti_rptr, ESPState, esp_is_before_version_5),
|
|
VMSTATE_UINT32_TEST(mig_ti_wptr, ESPState, esp_is_before_version_5),
|
|
VMSTATE_BUFFER_TEST(mig_ti_buf, ESPState, esp_is_before_version_5),
|
|
VMSTATE_UINT32(status, ESPState),
|
|
VMSTATE_UINT32_TEST(mig_deferred_status, ESPState,
|
|
esp_is_before_version_5),
|
|
VMSTATE_BOOL_TEST(mig_deferred_complete, ESPState,
|
|
esp_is_before_version_5),
|
|
VMSTATE_UINT32(dma, ESPState),
|
|
VMSTATE_STATIC_BUFFER(mig_cmdbuf, ESPState, 0,
|
|
esp_is_before_version_5, 0, 16),
|
|
VMSTATE_STATIC_BUFFER(mig_cmdbuf, ESPState, 4,
|
|
esp_is_before_version_5, 16,
|
|
sizeof(typeof_field(ESPState, mig_cmdbuf))),
|
|
VMSTATE_UINT32_TEST(mig_cmdlen, ESPState, esp_is_before_version_5),
|
|
VMSTATE_UINT32(do_cmd, ESPState),
|
|
VMSTATE_UINT32_TEST(mig_dma_left, ESPState, esp_is_before_version_5),
|
|
VMSTATE_BOOL_TEST(data_in_ready, ESPState, esp_is_version_5),
|
|
VMSTATE_UINT8_TEST(cmdfifo_cdb_offset, ESPState, esp_is_version_5),
|
|
VMSTATE_FIFO8_TEST(fifo, ESPState, esp_is_version_5),
|
|
VMSTATE_FIFO8_TEST(cmdfifo, ESPState, esp_is_version_5),
|
|
VMSTATE_UINT8_TEST(ti_cmd, ESPState, esp_is_version_5),
|
|
VMSTATE_END_OF_LIST()
|
|
},
|
|
};
|
|
|
|
static void sysbus_esp_mem_write(void *opaque, hwaddr addr,
|
|
uint64_t val, unsigned int size)
|
|
{
|
|
SysBusESPState *sysbus = opaque;
|
|
ESPState *s = ESP(&sysbus->esp);
|
|
uint32_t saddr;
|
|
|
|
saddr = addr >> sysbus->it_shift;
|
|
esp_reg_write(s, saddr, val);
|
|
}
|
|
|
|
static uint64_t sysbus_esp_mem_read(void *opaque, hwaddr addr,
|
|
unsigned int size)
|
|
{
|
|
SysBusESPState *sysbus = opaque;
|
|
ESPState *s = ESP(&sysbus->esp);
|
|
uint32_t saddr;
|
|
|
|
saddr = addr >> sysbus->it_shift;
|
|
return esp_reg_read(s, saddr);
|
|
}
|
|
|
|
static const MemoryRegionOps sysbus_esp_mem_ops = {
|
|
.read = sysbus_esp_mem_read,
|
|
.write = sysbus_esp_mem_write,
|
|
.endianness = DEVICE_NATIVE_ENDIAN,
|
|
.valid.accepts = esp_mem_accepts,
|
|
};
|
|
|
|
static void sysbus_esp_pdma_write(void *opaque, hwaddr addr,
|
|
uint64_t val, unsigned int size)
|
|
{
|
|
SysBusESPState *sysbus = opaque;
|
|
ESPState *s = ESP(&sysbus->esp);
|
|
|
|
trace_esp_pdma_write(size);
|
|
|
|
switch (size) {
|
|
case 1:
|
|
esp_pdma_write(s, val);
|
|
break;
|
|
case 2:
|
|
esp_pdma_write(s, val >> 8);
|
|
esp_pdma_write(s, val);
|
|
break;
|
|
}
|
|
s->pdma_cb(s);
|
|
}
|
|
|
|
static uint64_t sysbus_esp_pdma_read(void *opaque, hwaddr addr,
|
|
unsigned int size)
|
|
{
|
|
SysBusESPState *sysbus = opaque;
|
|
ESPState *s = ESP(&sysbus->esp);
|
|
uint64_t val = 0;
|
|
|
|
trace_esp_pdma_read(size);
|
|
|
|
switch (size) {
|
|
case 1:
|
|
val = esp_pdma_read(s);
|
|
break;
|
|
case 2:
|
|
val = esp_pdma_read(s);
|
|
val = (val << 8) | esp_pdma_read(s);
|
|
break;
|
|
}
|
|
if (fifo8_num_used(&s->fifo) < 2) {
|
|
s->pdma_cb(s);
|
|
}
|
|
return val;
|
|
}
|
|
|
|
static const MemoryRegionOps sysbus_esp_pdma_ops = {
|
|
.read = sysbus_esp_pdma_read,
|
|
.write = sysbus_esp_pdma_write,
|
|
.endianness = DEVICE_NATIVE_ENDIAN,
|
|
.valid.min_access_size = 1,
|
|
.valid.max_access_size = 4,
|
|
.impl.min_access_size = 1,
|
|
.impl.max_access_size = 2,
|
|
};
|
|
|
|
static const struct SCSIBusInfo esp_scsi_info = {
|
|
.tcq = false,
|
|
.max_target = ESP_MAX_DEVS,
|
|
.max_lun = 7,
|
|
|
|
.transfer_data = esp_transfer_data,
|
|
.complete = esp_command_complete,
|
|
.cancel = esp_request_cancelled
|
|
};
|
|
|
|
static void sysbus_esp_gpio_demux(void *opaque, int irq, int level)
|
|
{
|
|
SysBusESPState *sysbus = SYSBUS_ESP(opaque);
|
|
ESPState *s = ESP(&sysbus->esp);
|
|
|
|
switch (irq) {
|
|
case 0:
|
|
parent_esp_reset(s, irq, level);
|
|
break;
|
|
case 1:
|
|
esp_dma_enable(opaque, irq, level);
|
|
break;
|
|
}
|
|
}
|
|
|
|
static void sysbus_esp_realize(DeviceState *dev, Error **errp)
|
|
{
|
|
SysBusDevice *sbd = SYS_BUS_DEVICE(dev);
|
|
SysBusESPState *sysbus = SYSBUS_ESP(dev);
|
|
ESPState *s = ESP(&sysbus->esp);
|
|
|
|
if (!qdev_realize(DEVICE(s), NULL, errp)) {
|
|
return;
|
|
}
|
|
|
|
sysbus_init_irq(sbd, &s->irq);
|
|
sysbus_init_irq(sbd, &s->irq_data);
|
|
assert(sysbus->it_shift != -1);
|
|
|
|
s->chip_id = TCHI_FAS100A;
|
|
memory_region_init_io(&sysbus->iomem, OBJECT(sysbus), &sysbus_esp_mem_ops,
|
|
sysbus, "esp-regs", ESP_REGS << sysbus->it_shift);
|
|
sysbus_init_mmio(sbd, &sysbus->iomem);
|
|
memory_region_init_io(&sysbus->pdma, OBJECT(sysbus), &sysbus_esp_pdma_ops,
|
|
sysbus, "esp-pdma", 4);
|
|
sysbus_init_mmio(sbd, &sysbus->pdma);
|
|
|
|
qdev_init_gpio_in(dev, sysbus_esp_gpio_demux, 2);
|
|
|
|
scsi_bus_new(&s->bus, sizeof(s->bus), dev, &esp_scsi_info, NULL);
|
|
}
|
|
|
|
static void sysbus_esp_hard_reset(DeviceState *dev)
|
|
{
|
|
SysBusESPState *sysbus = SYSBUS_ESP(dev);
|
|
ESPState *s = ESP(&sysbus->esp);
|
|
|
|
esp_hard_reset(s);
|
|
}
|
|
|
|
static void sysbus_esp_init(Object *obj)
|
|
{
|
|
SysBusESPState *sysbus = SYSBUS_ESP(obj);
|
|
|
|
object_initialize_child(obj, "esp", &sysbus->esp, TYPE_ESP);
|
|
}
|
|
|
|
static const VMStateDescription vmstate_sysbus_esp_scsi = {
|
|
.name = "sysbusespscsi",
|
|
.version_id = 2,
|
|
.minimum_version_id = 1,
|
|
.pre_save = esp_pre_save,
|
|
.fields = (VMStateField[]) {
|
|
VMSTATE_UINT8_V(esp.mig_version_id, SysBusESPState, 2),
|
|
VMSTATE_STRUCT(esp, SysBusESPState, 0, vmstate_esp, ESPState),
|
|
VMSTATE_END_OF_LIST()
|
|
}
|
|
};
|
|
|
|
static void sysbus_esp_class_init(ObjectClass *klass, void *data)
|
|
{
|
|
DeviceClass *dc = DEVICE_CLASS(klass);
|
|
|
|
dc->realize = sysbus_esp_realize;
|
|
dc->reset = sysbus_esp_hard_reset;
|
|
dc->vmsd = &vmstate_sysbus_esp_scsi;
|
|
set_bit(DEVICE_CATEGORY_STORAGE, dc->categories);
|
|
}
|
|
|
|
static const TypeInfo sysbus_esp_info = {
|
|
.name = TYPE_SYSBUS_ESP,
|
|
.parent = TYPE_SYS_BUS_DEVICE,
|
|
.instance_init = sysbus_esp_init,
|
|
.instance_size = sizeof(SysBusESPState),
|
|
.class_init = sysbus_esp_class_init,
|
|
};
|
|
|
|
static void esp_finalize(Object *obj)
|
|
{
|
|
ESPState *s = ESP(obj);
|
|
|
|
fifo8_destroy(&s->fifo);
|
|
fifo8_destroy(&s->cmdfifo);
|
|
}
|
|
|
|
static void esp_init(Object *obj)
|
|
{
|
|
ESPState *s = ESP(obj);
|
|
|
|
fifo8_create(&s->fifo, ESP_FIFO_SZ);
|
|
fifo8_create(&s->cmdfifo, ESP_CMDFIFO_SZ);
|
|
}
|
|
|
|
static void esp_class_init(ObjectClass *klass, void *data)
|
|
{
|
|
DeviceClass *dc = DEVICE_CLASS(klass);
|
|
|
|
/* internal device for sysbusesp/pciespscsi, not user-creatable */
|
|
dc->user_creatable = false;
|
|
set_bit(DEVICE_CATEGORY_STORAGE, dc->categories);
|
|
}
|
|
|
|
static const TypeInfo esp_info = {
|
|
.name = TYPE_ESP,
|
|
.parent = TYPE_DEVICE,
|
|
.instance_init = esp_init,
|
|
.instance_finalize = esp_finalize,
|
|
.instance_size = sizeof(ESPState),
|
|
.class_init = esp_class_init,
|
|
};
|
|
|
|
static void esp_register_types(void)
|
|
{
|
|
type_register_static(&sysbus_esp_info);
|
|
type_register_static(&esp_info);
|
|
}
|
|
|
|
type_init(esp_register_types)
|