12ec8bd51e
The header file hw/arm/arm.h now includes only declarations relating to hw/arm/boot.c functionality. Rename it accordingly, and adjust its header comment. The bulk of this commit was created via perl -pi -e 's|hw/arm/arm.h|hw/arm/boot.h|' hw/arm/*.c include/hw/arm/*.h In a few cases we can just delete the #include: hw/arm/msf2-soc.c, include/hw/arm/aspeed_soc.h and include/hw/arm/bcm2836.h did not require it. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190516163857.6430-4-peter.maydell@linaro.org
4084 lines
116 KiB
C
4084 lines
116 KiB
C
/*
|
|
* TI OMAP processors emulation.
|
|
*
|
|
* Copyright (C) 2006-2008 Andrzej Zaborowski <balrog@zabor.org>
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 or
|
|
* (at your option) version 3 of the License.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License along
|
|
* with this program; if not, see <http://www.gnu.org/licenses/>.
|
|
*/
|
|
|
|
#include "qemu/osdep.h"
|
|
#include "qemu/error-report.h"
|
|
#include "qapi/error.h"
|
|
#include "qemu-common.h"
|
|
#include "cpu.h"
|
|
#include "hw/boards.h"
|
|
#include "hw/hw.h"
|
|
#include "hw/arm/boot.h"
|
|
#include "hw/arm/omap.h"
|
|
#include "sysemu/sysemu.h"
|
|
#include "hw/arm/soc_dma.h"
|
|
#include "sysemu/qtest.h"
|
|
#include "qemu/range.h"
|
|
#include "hw/sysbus.h"
|
|
#include "qemu/cutils.h"
|
|
#include "qemu/bcd.h"
|
|
|
|
static inline void omap_log_badwidth(const char *funcname, hwaddr addr, int sz)
|
|
{
|
|
qemu_log_mask(LOG_GUEST_ERROR, "%s: %d-bit register %#08" HWADDR_PRIx "\n",
|
|
funcname, 8 * sz, addr);
|
|
}
|
|
|
|
/* Should signal the TCMI/GPMC */
|
|
uint32_t omap_badwidth_read8(void *opaque, hwaddr addr)
|
|
{
|
|
uint8_t ret;
|
|
|
|
omap_log_badwidth(__func__, addr, 1);
|
|
cpu_physical_memory_read(addr, &ret, 1);
|
|
return ret;
|
|
}
|
|
|
|
void omap_badwidth_write8(void *opaque, hwaddr addr,
|
|
uint32_t value)
|
|
{
|
|
uint8_t val8 = value;
|
|
|
|
omap_log_badwidth(__func__, addr, 1);
|
|
cpu_physical_memory_write(addr, &val8, 1);
|
|
}
|
|
|
|
uint32_t omap_badwidth_read16(void *opaque, hwaddr addr)
|
|
{
|
|
uint16_t ret;
|
|
|
|
omap_log_badwidth(__func__, addr, 2);
|
|
cpu_physical_memory_read(addr, &ret, 2);
|
|
return ret;
|
|
}
|
|
|
|
void omap_badwidth_write16(void *opaque, hwaddr addr,
|
|
uint32_t value)
|
|
{
|
|
uint16_t val16 = value;
|
|
|
|
omap_log_badwidth(__func__, addr, 2);
|
|
cpu_physical_memory_write(addr, &val16, 2);
|
|
}
|
|
|
|
uint32_t omap_badwidth_read32(void *opaque, hwaddr addr)
|
|
{
|
|
uint32_t ret;
|
|
|
|
omap_log_badwidth(__func__, addr, 4);
|
|
cpu_physical_memory_read(addr, &ret, 4);
|
|
return ret;
|
|
}
|
|
|
|
void omap_badwidth_write32(void *opaque, hwaddr addr,
|
|
uint32_t value)
|
|
{
|
|
omap_log_badwidth(__func__, addr, 4);
|
|
cpu_physical_memory_write(addr, &value, 4);
|
|
}
|
|
|
|
/* MPU OS timers */
|
|
struct omap_mpu_timer_s {
|
|
MemoryRegion iomem;
|
|
qemu_irq irq;
|
|
omap_clk clk;
|
|
uint32_t val;
|
|
int64_t time;
|
|
QEMUTimer *timer;
|
|
QEMUBH *tick;
|
|
int64_t rate;
|
|
int it_ena;
|
|
|
|
int enable;
|
|
int ptv;
|
|
int ar;
|
|
int st;
|
|
uint32_t reset_val;
|
|
};
|
|
|
|
static inline uint32_t omap_timer_read(struct omap_mpu_timer_s *timer)
|
|
{
|
|
uint64_t distance = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) - timer->time;
|
|
|
|
if (timer->st && timer->enable && timer->rate)
|
|
return timer->val - muldiv64(distance >> (timer->ptv + 1),
|
|
timer->rate, NANOSECONDS_PER_SECOND);
|
|
else
|
|
return timer->val;
|
|
}
|
|
|
|
static inline void omap_timer_sync(struct omap_mpu_timer_s *timer)
|
|
{
|
|
timer->val = omap_timer_read(timer);
|
|
timer->time = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL);
|
|
}
|
|
|
|
static inline void omap_timer_update(struct omap_mpu_timer_s *timer)
|
|
{
|
|
int64_t expires;
|
|
|
|
if (timer->enable && timer->st && timer->rate) {
|
|
timer->val = timer->reset_val; /* Should skip this on clk enable */
|
|
expires = muldiv64((uint64_t) timer->val << (timer->ptv + 1),
|
|
NANOSECONDS_PER_SECOND, timer->rate);
|
|
|
|
/* If timer expiry would be sooner than in about 1 ms and
|
|
* auto-reload isn't set, then fire immediately. This is a hack
|
|
* to make systems like PalmOS run in acceptable time. PalmOS
|
|
* sets the interval to a very low value and polls the status bit
|
|
* in a busy loop when it wants to sleep just a couple of CPU
|
|
* ticks. */
|
|
if (expires > (NANOSECONDS_PER_SECOND >> 10) || timer->ar) {
|
|
timer_mod(timer->timer, timer->time + expires);
|
|
} else {
|
|
qemu_bh_schedule(timer->tick);
|
|
}
|
|
} else
|
|
timer_del(timer->timer);
|
|
}
|
|
|
|
static void omap_timer_fire(void *opaque)
|
|
{
|
|
struct omap_mpu_timer_s *timer = opaque;
|
|
|
|
if (!timer->ar) {
|
|
timer->val = 0;
|
|
timer->st = 0;
|
|
}
|
|
|
|
if (timer->it_ena)
|
|
/* Edge-triggered irq */
|
|
qemu_irq_pulse(timer->irq);
|
|
}
|
|
|
|
static void omap_timer_tick(void *opaque)
|
|
{
|
|
struct omap_mpu_timer_s *timer = (struct omap_mpu_timer_s *) opaque;
|
|
|
|
omap_timer_sync(timer);
|
|
omap_timer_fire(timer);
|
|
omap_timer_update(timer);
|
|
}
|
|
|
|
static void omap_timer_clk_update(void *opaque, int line, int on)
|
|
{
|
|
struct omap_mpu_timer_s *timer = (struct omap_mpu_timer_s *) opaque;
|
|
|
|
omap_timer_sync(timer);
|
|
timer->rate = on ? omap_clk_getrate(timer->clk) : 0;
|
|
omap_timer_update(timer);
|
|
}
|
|
|
|
static void omap_timer_clk_setup(struct omap_mpu_timer_s *timer)
|
|
{
|
|
omap_clk_adduser(timer->clk,
|
|
qemu_allocate_irq(omap_timer_clk_update, timer, 0));
|
|
timer->rate = omap_clk_getrate(timer->clk);
|
|
}
|
|
|
|
static uint64_t omap_mpu_timer_read(void *opaque, hwaddr addr,
|
|
unsigned size)
|
|
{
|
|
struct omap_mpu_timer_s *s = (struct omap_mpu_timer_s *) opaque;
|
|
|
|
if (size != 4) {
|
|
return omap_badwidth_read32(opaque, addr);
|
|
}
|
|
|
|
switch (addr) {
|
|
case 0x00: /* CNTL_TIMER */
|
|
return (s->enable << 5) | (s->ptv << 2) | (s->ar << 1) | s->st;
|
|
|
|
case 0x04: /* LOAD_TIM */
|
|
break;
|
|
|
|
case 0x08: /* READ_TIM */
|
|
return omap_timer_read(s);
|
|
}
|
|
|
|
OMAP_BAD_REG(addr);
|
|
return 0;
|
|
}
|
|
|
|
static void omap_mpu_timer_write(void *opaque, hwaddr addr,
|
|
uint64_t value, unsigned size)
|
|
{
|
|
struct omap_mpu_timer_s *s = (struct omap_mpu_timer_s *) opaque;
|
|
|
|
if (size != 4) {
|
|
omap_badwidth_write32(opaque, addr, value);
|
|
return;
|
|
}
|
|
|
|
switch (addr) {
|
|
case 0x00: /* CNTL_TIMER */
|
|
omap_timer_sync(s);
|
|
s->enable = (value >> 5) & 1;
|
|
s->ptv = (value >> 2) & 7;
|
|
s->ar = (value >> 1) & 1;
|
|
s->st = value & 1;
|
|
omap_timer_update(s);
|
|
return;
|
|
|
|
case 0x04: /* LOAD_TIM */
|
|
s->reset_val = value;
|
|
return;
|
|
|
|
case 0x08: /* READ_TIM */
|
|
OMAP_RO_REG(addr);
|
|
break;
|
|
|
|
default:
|
|
OMAP_BAD_REG(addr);
|
|
}
|
|
}
|
|
|
|
static const MemoryRegionOps omap_mpu_timer_ops = {
|
|
.read = omap_mpu_timer_read,
|
|
.write = omap_mpu_timer_write,
|
|
.endianness = DEVICE_LITTLE_ENDIAN,
|
|
};
|
|
|
|
static void omap_mpu_timer_reset(struct omap_mpu_timer_s *s)
|
|
{
|
|
timer_del(s->timer);
|
|
s->enable = 0;
|
|
s->reset_val = 31337;
|
|
s->val = 0;
|
|
s->ptv = 0;
|
|
s->ar = 0;
|
|
s->st = 0;
|
|
s->it_ena = 1;
|
|
}
|
|
|
|
static struct omap_mpu_timer_s *omap_mpu_timer_init(MemoryRegion *system_memory,
|
|
hwaddr base,
|
|
qemu_irq irq, omap_clk clk)
|
|
{
|
|
struct omap_mpu_timer_s *s = g_new0(struct omap_mpu_timer_s, 1);
|
|
|
|
s->irq = irq;
|
|
s->clk = clk;
|
|
s->timer = timer_new_ns(QEMU_CLOCK_VIRTUAL, omap_timer_tick, s);
|
|
s->tick = qemu_bh_new(omap_timer_fire, s);
|
|
omap_mpu_timer_reset(s);
|
|
omap_timer_clk_setup(s);
|
|
|
|
memory_region_init_io(&s->iomem, NULL, &omap_mpu_timer_ops, s,
|
|
"omap-mpu-timer", 0x100);
|
|
|
|
memory_region_add_subregion(system_memory, base, &s->iomem);
|
|
|
|
return s;
|
|
}
|
|
|
|
/* Watchdog timer */
|
|
struct omap_watchdog_timer_s {
|
|
struct omap_mpu_timer_s timer;
|
|
MemoryRegion iomem;
|
|
uint8_t last_wr;
|
|
int mode;
|
|
int free;
|
|
int reset;
|
|
};
|
|
|
|
static uint64_t omap_wd_timer_read(void *opaque, hwaddr addr,
|
|
unsigned size)
|
|
{
|
|
struct omap_watchdog_timer_s *s = (struct omap_watchdog_timer_s *) opaque;
|
|
|
|
if (size != 2) {
|
|
return omap_badwidth_read16(opaque, addr);
|
|
}
|
|
|
|
switch (addr) {
|
|
case 0x00: /* CNTL_TIMER */
|
|
return (s->timer.ptv << 9) | (s->timer.ar << 8) |
|
|
(s->timer.st << 7) | (s->free << 1);
|
|
|
|
case 0x04: /* READ_TIMER */
|
|
return omap_timer_read(&s->timer);
|
|
|
|
case 0x08: /* TIMER_MODE */
|
|
return s->mode << 15;
|
|
}
|
|
|
|
OMAP_BAD_REG(addr);
|
|
return 0;
|
|
}
|
|
|
|
static void omap_wd_timer_write(void *opaque, hwaddr addr,
|
|
uint64_t value, unsigned size)
|
|
{
|
|
struct omap_watchdog_timer_s *s = (struct omap_watchdog_timer_s *) opaque;
|
|
|
|
if (size != 2) {
|
|
omap_badwidth_write16(opaque, addr, value);
|
|
return;
|
|
}
|
|
|
|
switch (addr) {
|
|
case 0x00: /* CNTL_TIMER */
|
|
omap_timer_sync(&s->timer);
|
|
s->timer.ptv = (value >> 9) & 7;
|
|
s->timer.ar = (value >> 8) & 1;
|
|
s->timer.st = (value >> 7) & 1;
|
|
s->free = (value >> 1) & 1;
|
|
omap_timer_update(&s->timer);
|
|
break;
|
|
|
|
case 0x04: /* LOAD_TIMER */
|
|
s->timer.reset_val = value & 0xffff;
|
|
break;
|
|
|
|
case 0x08: /* TIMER_MODE */
|
|
if (!s->mode && ((value >> 15) & 1))
|
|
omap_clk_get(s->timer.clk);
|
|
s->mode |= (value >> 15) & 1;
|
|
if (s->last_wr == 0xf5) {
|
|
if ((value & 0xff) == 0xa0) {
|
|
if (s->mode) {
|
|
s->mode = 0;
|
|
omap_clk_put(s->timer.clk);
|
|
}
|
|
} else {
|
|
/* XXX: on T|E hardware somehow this has no effect,
|
|
* on Zire 71 it works as specified. */
|
|
s->reset = 1;
|
|
qemu_system_reset_request(SHUTDOWN_CAUSE_GUEST_RESET);
|
|
}
|
|
}
|
|
s->last_wr = value & 0xff;
|
|
break;
|
|
|
|
default:
|
|
OMAP_BAD_REG(addr);
|
|
}
|
|
}
|
|
|
|
static const MemoryRegionOps omap_wd_timer_ops = {
|
|
.read = omap_wd_timer_read,
|
|
.write = omap_wd_timer_write,
|
|
.endianness = DEVICE_NATIVE_ENDIAN,
|
|
};
|
|
|
|
static void omap_wd_timer_reset(struct omap_watchdog_timer_s *s)
|
|
{
|
|
timer_del(s->timer.timer);
|
|
if (!s->mode)
|
|
omap_clk_get(s->timer.clk);
|
|
s->mode = 1;
|
|
s->free = 1;
|
|
s->reset = 0;
|
|
s->timer.enable = 1;
|
|
s->timer.it_ena = 1;
|
|
s->timer.reset_val = 0xffff;
|
|
s->timer.val = 0;
|
|
s->timer.st = 0;
|
|
s->timer.ptv = 0;
|
|
s->timer.ar = 0;
|
|
omap_timer_update(&s->timer);
|
|
}
|
|
|
|
static struct omap_watchdog_timer_s *omap_wd_timer_init(MemoryRegion *memory,
|
|
hwaddr base,
|
|
qemu_irq irq, omap_clk clk)
|
|
{
|
|
struct omap_watchdog_timer_s *s = g_new0(struct omap_watchdog_timer_s, 1);
|
|
|
|
s->timer.irq = irq;
|
|
s->timer.clk = clk;
|
|
s->timer.timer = timer_new_ns(QEMU_CLOCK_VIRTUAL, omap_timer_tick, &s->timer);
|
|
omap_wd_timer_reset(s);
|
|
omap_timer_clk_setup(&s->timer);
|
|
|
|
memory_region_init_io(&s->iomem, NULL, &omap_wd_timer_ops, s,
|
|
"omap-wd-timer", 0x100);
|
|
memory_region_add_subregion(memory, base, &s->iomem);
|
|
|
|
return s;
|
|
}
|
|
|
|
/* 32-kHz timer */
|
|
struct omap_32khz_timer_s {
|
|
struct omap_mpu_timer_s timer;
|
|
MemoryRegion iomem;
|
|
};
|
|
|
|
static uint64_t omap_os_timer_read(void *opaque, hwaddr addr,
|
|
unsigned size)
|
|
{
|
|
struct omap_32khz_timer_s *s = (struct omap_32khz_timer_s *) opaque;
|
|
int offset = addr & OMAP_MPUI_REG_MASK;
|
|
|
|
if (size != 4) {
|
|
return omap_badwidth_read32(opaque, addr);
|
|
}
|
|
|
|
switch (offset) {
|
|
case 0x00: /* TVR */
|
|
return s->timer.reset_val;
|
|
|
|
case 0x04: /* TCR */
|
|
return omap_timer_read(&s->timer);
|
|
|
|
case 0x08: /* CR */
|
|
return (s->timer.ar << 3) | (s->timer.it_ena << 2) | s->timer.st;
|
|
|
|
default:
|
|
break;
|
|
}
|
|
OMAP_BAD_REG(addr);
|
|
return 0;
|
|
}
|
|
|
|
static void omap_os_timer_write(void *opaque, hwaddr addr,
|
|
uint64_t value, unsigned size)
|
|
{
|
|
struct omap_32khz_timer_s *s = (struct omap_32khz_timer_s *) opaque;
|
|
int offset = addr & OMAP_MPUI_REG_MASK;
|
|
|
|
if (size != 4) {
|
|
omap_badwidth_write32(opaque, addr, value);
|
|
return;
|
|
}
|
|
|
|
switch (offset) {
|
|
case 0x00: /* TVR */
|
|
s->timer.reset_val = value & 0x00ffffff;
|
|
break;
|
|
|
|
case 0x04: /* TCR */
|
|
OMAP_RO_REG(addr);
|
|
break;
|
|
|
|
case 0x08: /* CR */
|
|
s->timer.ar = (value >> 3) & 1;
|
|
s->timer.it_ena = (value >> 2) & 1;
|
|
if (s->timer.st != (value & 1) || (value & 2)) {
|
|
omap_timer_sync(&s->timer);
|
|
s->timer.enable = value & 1;
|
|
s->timer.st = value & 1;
|
|
omap_timer_update(&s->timer);
|
|
}
|
|
break;
|
|
|
|
default:
|
|
OMAP_BAD_REG(addr);
|
|
}
|
|
}
|
|
|
|
static const MemoryRegionOps omap_os_timer_ops = {
|
|
.read = omap_os_timer_read,
|
|
.write = omap_os_timer_write,
|
|
.endianness = DEVICE_NATIVE_ENDIAN,
|
|
};
|
|
|
|
static void omap_os_timer_reset(struct omap_32khz_timer_s *s)
|
|
{
|
|
timer_del(s->timer.timer);
|
|
s->timer.enable = 0;
|
|
s->timer.it_ena = 0;
|
|
s->timer.reset_val = 0x00ffffff;
|
|
s->timer.val = 0;
|
|
s->timer.st = 0;
|
|
s->timer.ptv = 0;
|
|
s->timer.ar = 1;
|
|
}
|
|
|
|
static struct omap_32khz_timer_s *omap_os_timer_init(MemoryRegion *memory,
|
|
hwaddr base,
|
|
qemu_irq irq, omap_clk clk)
|
|
{
|
|
struct omap_32khz_timer_s *s = g_new0(struct omap_32khz_timer_s, 1);
|
|
|
|
s->timer.irq = irq;
|
|
s->timer.clk = clk;
|
|
s->timer.timer = timer_new_ns(QEMU_CLOCK_VIRTUAL, omap_timer_tick, &s->timer);
|
|
omap_os_timer_reset(s);
|
|
omap_timer_clk_setup(&s->timer);
|
|
|
|
memory_region_init_io(&s->iomem, NULL, &omap_os_timer_ops, s,
|
|
"omap-os-timer", 0x800);
|
|
memory_region_add_subregion(memory, base, &s->iomem);
|
|
|
|
return s;
|
|
}
|
|
|
|
/* Ultra Low-Power Device Module */
|
|
static uint64_t omap_ulpd_pm_read(void *opaque, hwaddr addr,
|
|
unsigned size)
|
|
{
|
|
struct omap_mpu_state_s *s = (struct omap_mpu_state_s *) opaque;
|
|
uint16_t ret;
|
|
|
|
if (size != 2) {
|
|
return omap_badwidth_read16(opaque, addr);
|
|
}
|
|
|
|
switch (addr) {
|
|
case 0x14: /* IT_STATUS */
|
|
ret = s->ulpd_pm_regs[addr >> 2];
|
|
s->ulpd_pm_regs[addr >> 2] = 0;
|
|
qemu_irq_lower(qdev_get_gpio_in(s->ih[1], OMAP_INT_GAUGE_32K));
|
|
return ret;
|
|
|
|
case 0x18: /* Reserved */
|
|
case 0x1c: /* Reserved */
|
|
case 0x20: /* Reserved */
|
|
case 0x28: /* Reserved */
|
|
case 0x2c: /* Reserved */
|
|
OMAP_BAD_REG(addr);
|
|
/* fall through */
|
|
case 0x00: /* COUNTER_32_LSB */
|
|
case 0x04: /* COUNTER_32_MSB */
|
|
case 0x08: /* COUNTER_HIGH_FREQ_LSB */
|
|
case 0x0c: /* COUNTER_HIGH_FREQ_MSB */
|
|
case 0x10: /* GAUGING_CTRL */
|
|
case 0x24: /* SETUP_ANALOG_CELL3_ULPD1 */
|
|
case 0x30: /* CLOCK_CTRL */
|
|
case 0x34: /* SOFT_REQ */
|
|
case 0x38: /* COUNTER_32_FIQ */
|
|
case 0x3c: /* DPLL_CTRL */
|
|
case 0x40: /* STATUS_REQ */
|
|
/* XXX: check clk::usecount state for every clock */
|
|
case 0x48: /* LOCL_TIME */
|
|
case 0x4c: /* APLL_CTRL */
|
|
case 0x50: /* POWER_CTRL */
|
|
return s->ulpd_pm_regs[addr >> 2];
|
|
}
|
|
|
|
OMAP_BAD_REG(addr);
|
|
return 0;
|
|
}
|
|
|
|
static inline void omap_ulpd_clk_update(struct omap_mpu_state_s *s,
|
|
uint16_t diff, uint16_t value)
|
|
{
|
|
if (diff & (1 << 4)) /* USB_MCLK_EN */
|
|
omap_clk_onoff(omap_findclk(s, "usb_clk0"), (value >> 4) & 1);
|
|
if (diff & (1 << 5)) /* DIS_USB_PVCI_CLK */
|
|
omap_clk_onoff(omap_findclk(s, "usb_w2fc_ck"), (~value >> 5) & 1);
|
|
}
|
|
|
|
static inline void omap_ulpd_req_update(struct omap_mpu_state_s *s,
|
|
uint16_t diff, uint16_t value)
|
|
{
|
|
if (diff & (1 << 0)) /* SOFT_DPLL_REQ */
|
|
omap_clk_canidle(omap_findclk(s, "dpll4"), (~value >> 0) & 1);
|
|
if (diff & (1 << 1)) /* SOFT_COM_REQ */
|
|
omap_clk_canidle(omap_findclk(s, "com_mclk_out"), (~value >> 1) & 1);
|
|
if (diff & (1 << 2)) /* SOFT_SDW_REQ */
|
|
omap_clk_canidle(omap_findclk(s, "bt_mclk_out"), (~value >> 2) & 1);
|
|
if (diff & (1 << 3)) /* SOFT_USB_REQ */
|
|
omap_clk_canidle(omap_findclk(s, "usb_clk0"), (~value >> 3) & 1);
|
|
}
|
|
|
|
static void omap_ulpd_pm_write(void *opaque, hwaddr addr,
|
|
uint64_t value, unsigned size)
|
|
{
|
|
struct omap_mpu_state_s *s = (struct omap_mpu_state_s *) opaque;
|
|
int64_t now, ticks;
|
|
int div, mult;
|
|
static const int bypass_div[4] = { 1, 2, 4, 4 };
|
|
uint16_t diff;
|
|
|
|
if (size != 2) {
|
|
omap_badwidth_write16(opaque, addr, value);
|
|
return;
|
|
}
|
|
|
|
switch (addr) {
|
|
case 0x00: /* COUNTER_32_LSB */
|
|
case 0x04: /* COUNTER_32_MSB */
|
|
case 0x08: /* COUNTER_HIGH_FREQ_LSB */
|
|
case 0x0c: /* COUNTER_HIGH_FREQ_MSB */
|
|
case 0x14: /* IT_STATUS */
|
|
case 0x40: /* STATUS_REQ */
|
|
OMAP_RO_REG(addr);
|
|
break;
|
|
|
|
case 0x10: /* GAUGING_CTRL */
|
|
/* Bits 0 and 1 seem to be confused in the OMAP 310 TRM */
|
|
if ((s->ulpd_pm_regs[addr >> 2] ^ value) & 1) {
|
|
now = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL);
|
|
|
|
if (value & 1)
|
|
s->ulpd_gauge_start = now;
|
|
else {
|
|
now -= s->ulpd_gauge_start;
|
|
|
|
/* 32-kHz ticks */
|
|
ticks = muldiv64(now, 32768, NANOSECONDS_PER_SECOND);
|
|
s->ulpd_pm_regs[0x00 >> 2] = (ticks >> 0) & 0xffff;
|
|
s->ulpd_pm_regs[0x04 >> 2] = (ticks >> 16) & 0xffff;
|
|
if (ticks >> 32) /* OVERFLOW_32K */
|
|
s->ulpd_pm_regs[0x14 >> 2] |= 1 << 2;
|
|
|
|
/* High frequency ticks */
|
|
ticks = muldiv64(now, 12000000, NANOSECONDS_PER_SECOND);
|
|
s->ulpd_pm_regs[0x08 >> 2] = (ticks >> 0) & 0xffff;
|
|
s->ulpd_pm_regs[0x0c >> 2] = (ticks >> 16) & 0xffff;
|
|
if (ticks >> 32) /* OVERFLOW_HI_FREQ */
|
|
s->ulpd_pm_regs[0x14 >> 2] |= 1 << 1;
|
|
|
|
s->ulpd_pm_regs[0x14 >> 2] |= 1 << 0; /* IT_GAUGING */
|
|
qemu_irq_raise(qdev_get_gpio_in(s->ih[1], OMAP_INT_GAUGE_32K));
|
|
}
|
|
}
|
|
s->ulpd_pm_regs[addr >> 2] = value;
|
|
break;
|
|
|
|
case 0x18: /* Reserved */
|
|
case 0x1c: /* Reserved */
|
|
case 0x20: /* Reserved */
|
|
case 0x28: /* Reserved */
|
|
case 0x2c: /* Reserved */
|
|
OMAP_BAD_REG(addr);
|
|
/* fall through */
|
|
case 0x24: /* SETUP_ANALOG_CELL3_ULPD1 */
|
|
case 0x38: /* COUNTER_32_FIQ */
|
|
case 0x48: /* LOCL_TIME */
|
|
case 0x50: /* POWER_CTRL */
|
|
s->ulpd_pm_regs[addr >> 2] = value;
|
|
break;
|
|
|
|
case 0x30: /* CLOCK_CTRL */
|
|
diff = s->ulpd_pm_regs[addr >> 2] ^ value;
|
|
s->ulpd_pm_regs[addr >> 2] = value & 0x3f;
|
|
omap_ulpd_clk_update(s, diff, value);
|
|
break;
|
|
|
|
case 0x34: /* SOFT_REQ */
|
|
diff = s->ulpd_pm_regs[addr >> 2] ^ value;
|
|
s->ulpd_pm_regs[addr >> 2] = value & 0x1f;
|
|
omap_ulpd_req_update(s, diff, value);
|
|
break;
|
|
|
|
case 0x3c: /* DPLL_CTRL */
|
|
/* XXX: OMAP310 TRM claims bit 3 is PLL_ENABLE, and bit 4 is
|
|
* omitted altogether, probably a typo. */
|
|
/* This register has identical semantics with DPLL(1:3) control
|
|
* registers, see omap_dpll_write() */
|
|
diff = s->ulpd_pm_regs[addr >> 2] & value;
|
|
s->ulpd_pm_regs[addr >> 2] = value & 0x2fff;
|
|
if (diff & (0x3ff << 2)) {
|
|
if (value & (1 << 4)) { /* PLL_ENABLE */
|
|
div = ((value >> 5) & 3) + 1; /* PLL_DIV */
|
|
mult = MIN((value >> 7) & 0x1f, 1); /* PLL_MULT */
|
|
} else {
|
|
div = bypass_div[((value >> 2) & 3)]; /* BYPASS_DIV */
|
|
mult = 1;
|
|
}
|
|
omap_clk_setrate(omap_findclk(s, "dpll4"), div, mult);
|
|
}
|
|
|
|
/* Enter the desired mode. */
|
|
s->ulpd_pm_regs[addr >> 2] =
|
|
(s->ulpd_pm_regs[addr >> 2] & 0xfffe) |
|
|
((s->ulpd_pm_regs[addr >> 2] >> 4) & 1);
|
|
|
|
/* Act as if the lock is restored. */
|
|
s->ulpd_pm_regs[addr >> 2] |= 2;
|
|
break;
|
|
|
|
case 0x4c: /* APLL_CTRL */
|
|
diff = s->ulpd_pm_regs[addr >> 2] & value;
|
|
s->ulpd_pm_regs[addr >> 2] = value & 0xf;
|
|
if (diff & (1 << 0)) /* APLL_NDPLL_SWITCH */
|
|
omap_clk_reparent(omap_findclk(s, "ck_48m"), omap_findclk(s,
|
|
(value & (1 << 0)) ? "apll" : "dpll4"));
|
|
break;
|
|
|
|
default:
|
|
OMAP_BAD_REG(addr);
|
|
}
|
|
}
|
|
|
|
static const MemoryRegionOps omap_ulpd_pm_ops = {
|
|
.read = omap_ulpd_pm_read,
|
|
.write = omap_ulpd_pm_write,
|
|
.endianness = DEVICE_NATIVE_ENDIAN,
|
|
};
|
|
|
|
static void omap_ulpd_pm_reset(struct omap_mpu_state_s *mpu)
|
|
{
|
|
mpu->ulpd_pm_regs[0x00 >> 2] = 0x0001;
|
|
mpu->ulpd_pm_regs[0x04 >> 2] = 0x0000;
|
|
mpu->ulpd_pm_regs[0x08 >> 2] = 0x0001;
|
|
mpu->ulpd_pm_regs[0x0c >> 2] = 0x0000;
|
|
mpu->ulpd_pm_regs[0x10 >> 2] = 0x0000;
|
|
mpu->ulpd_pm_regs[0x18 >> 2] = 0x01;
|
|
mpu->ulpd_pm_regs[0x1c >> 2] = 0x01;
|
|
mpu->ulpd_pm_regs[0x20 >> 2] = 0x01;
|
|
mpu->ulpd_pm_regs[0x24 >> 2] = 0x03ff;
|
|
mpu->ulpd_pm_regs[0x28 >> 2] = 0x01;
|
|
mpu->ulpd_pm_regs[0x2c >> 2] = 0x01;
|
|
omap_ulpd_clk_update(mpu, mpu->ulpd_pm_regs[0x30 >> 2], 0x0000);
|
|
mpu->ulpd_pm_regs[0x30 >> 2] = 0x0000;
|
|
omap_ulpd_req_update(mpu, mpu->ulpd_pm_regs[0x34 >> 2], 0x0000);
|
|
mpu->ulpd_pm_regs[0x34 >> 2] = 0x0000;
|
|
mpu->ulpd_pm_regs[0x38 >> 2] = 0x0001;
|
|
mpu->ulpd_pm_regs[0x3c >> 2] = 0x2211;
|
|
mpu->ulpd_pm_regs[0x40 >> 2] = 0x0000; /* FIXME: dump a real STATUS_REQ */
|
|
mpu->ulpd_pm_regs[0x48 >> 2] = 0x960;
|
|
mpu->ulpd_pm_regs[0x4c >> 2] = 0x08;
|
|
mpu->ulpd_pm_regs[0x50 >> 2] = 0x08;
|
|
omap_clk_setrate(omap_findclk(mpu, "dpll4"), 1, 4);
|
|
omap_clk_reparent(omap_findclk(mpu, "ck_48m"), omap_findclk(mpu, "dpll4"));
|
|
}
|
|
|
|
static void omap_ulpd_pm_init(MemoryRegion *system_memory,
|
|
hwaddr base,
|
|
struct omap_mpu_state_s *mpu)
|
|
{
|
|
memory_region_init_io(&mpu->ulpd_pm_iomem, NULL, &omap_ulpd_pm_ops, mpu,
|
|
"omap-ulpd-pm", 0x800);
|
|
memory_region_add_subregion(system_memory, base, &mpu->ulpd_pm_iomem);
|
|
omap_ulpd_pm_reset(mpu);
|
|
}
|
|
|
|
/* OMAP Pin Configuration */
|
|
static uint64_t omap_pin_cfg_read(void *opaque, hwaddr addr,
|
|
unsigned size)
|
|
{
|
|
struct omap_mpu_state_s *s = (struct omap_mpu_state_s *) opaque;
|
|
|
|
if (size != 4) {
|
|
return omap_badwidth_read32(opaque, addr);
|
|
}
|
|
|
|
switch (addr) {
|
|
case 0x00: /* FUNC_MUX_CTRL_0 */
|
|
case 0x04: /* FUNC_MUX_CTRL_1 */
|
|
case 0x08: /* FUNC_MUX_CTRL_2 */
|
|
return s->func_mux_ctrl[addr >> 2];
|
|
|
|
case 0x0c: /* COMP_MODE_CTRL_0 */
|
|
return s->comp_mode_ctrl[0];
|
|
|
|
case 0x10: /* FUNC_MUX_CTRL_3 */
|
|
case 0x14: /* FUNC_MUX_CTRL_4 */
|
|
case 0x18: /* FUNC_MUX_CTRL_5 */
|
|
case 0x1c: /* FUNC_MUX_CTRL_6 */
|
|
case 0x20: /* FUNC_MUX_CTRL_7 */
|
|
case 0x24: /* FUNC_MUX_CTRL_8 */
|
|
case 0x28: /* FUNC_MUX_CTRL_9 */
|
|
case 0x2c: /* FUNC_MUX_CTRL_A */
|
|
case 0x30: /* FUNC_MUX_CTRL_B */
|
|
case 0x34: /* FUNC_MUX_CTRL_C */
|
|
case 0x38: /* FUNC_MUX_CTRL_D */
|
|
return s->func_mux_ctrl[(addr >> 2) - 1];
|
|
|
|
case 0x40: /* PULL_DWN_CTRL_0 */
|
|
case 0x44: /* PULL_DWN_CTRL_1 */
|
|
case 0x48: /* PULL_DWN_CTRL_2 */
|
|
case 0x4c: /* PULL_DWN_CTRL_3 */
|
|
return s->pull_dwn_ctrl[(addr & 0xf) >> 2];
|
|
|
|
case 0x50: /* GATE_INH_CTRL_0 */
|
|
return s->gate_inh_ctrl[0];
|
|
|
|
case 0x60: /* VOLTAGE_CTRL_0 */
|
|
return s->voltage_ctrl[0];
|
|
|
|
case 0x70: /* TEST_DBG_CTRL_0 */
|
|
return s->test_dbg_ctrl[0];
|
|
|
|
case 0x80: /* MOD_CONF_CTRL_0 */
|
|
return s->mod_conf_ctrl[0];
|
|
}
|
|
|
|
OMAP_BAD_REG(addr);
|
|
return 0;
|
|
}
|
|
|
|
static inline void omap_pin_funcmux0_update(struct omap_mpu_state_s *s,
|
|
uint32_t diff, uint32_t value)
|
|
{
|
|
if (s->compat1509) {
|
|
if (diff & (1 << 9)) /* BLUETOOTH */
|
|
omap_clk_onoff(omap_findclk(s, "bt_mclk_out"),
|
|
(~value >> 9) & 1);
|
|
if (diff & (1 << 7)) /* USB.CLKO */
|
|
omap_clk_onoff(omap_findclk(s, "usb.clko"),
|
|
(value >> 7) & 1);
|
|
}
|
|
}
|
|
|
|
static inline void omap_pin_funcmux1_update(struct omap_mpu_state_s *s,
|
|
uint32_t diff, uint32_t value)
|
|
{
|
|
if (s->compat1509) {
|
|
if (diff & (1U << 31)) {
|
|
/* MCBSP3_CLK_HIZ_DI */
|
|
omap_clk_onoff(omap_findclk(s, "mcbsp3.clkx"), (value >> 31) & 1);
|
|
}
|
|
if (diff & (1 << 1)) {
|
|
/* CLK32K */
|
|
omap_clk_onoff(omap_findclk(s, "clk32k_out"), (~value >> 1) & 1);
|
|
}
|
|
}
|
|
}
|
|
|
|
static inline void omap_pin_modconf1_update(struct omap_mpu_state_s *s,
|
|
uint32_t diff, uint32_t value)
|
|
{
|
|
if (diff & (1U << 31)) {
|
|
/* CONF_MOD_UART3_CLK_MODE_R */
|
|
omap_clk_reparent(omap_findclk(s, "uart3_ck"),
|
|
omap_findclk(s, ((value >> 31) & 1) ?
|
|
"ck_48m" : "armper_ck"));
|
|
}
|
|
if (diff & (1 << 30)) /* CONF_MOD_UART2_CLK_MODE_R */
|
|
omap_clk_reparent(omap_findclk(s, "uart2_ck"),
|
|
omap_findclk(s, ((value >> 30) & 1) ?
|
|
"ck_48m" : "armper_ck"));
|
|
if (diff & (1 << 29)) /* CONF_MOD_UART1_CLK_MODE_R */
|
|
omap_clk_reparent(omap_findclk(s, "uart1_ck"),
|
|
omap_findclk(s, ((value >> 29) & 1) ?
|
|
"ck_48m" : "armper_ck"));
|
|
if (diff & (1 << 23)) /* CONF_MOD_MMC_SD_CLK_REQ_R */
|
|
omap_clk_reparent(omap_findclk(s, "mmc_ck"),
|
|
omap_findclk(s, ((value >> 23) & 1) ?
|
|
"ck_48m" : "armper_ck"));
|
|
if (diff & (1 << 12)) /* CONF_MOD_COM_MCLK_12_48_S */
|
|
omap_clk_reparent(omap_findclk(s, "com_mclk_out"),
|
|
omap_findclk(s, ((value >> 12) & 1) ?
|
|
"ck_48m" : "armper_ck"));
|
|
if (diff & (1 << 9)) /* CONF_MOD_USB_HOST_HHC_UHO */
|
|
omap_clk_onoff(omap_findclk(s, "usb_hhc_ck"), (value >> 9) & 1);
|
|
}
|
|
|
|
static void omap_pin_cfg_write(void *opaque, hwaddr addr,
|
|
uint64_t value, unsigned size)
|
|
{
|
|
struct omap_mpu_state_s *s = (struct omap_mpu_state_s *) opaque;
|
|
uint32_t diff;
|
|
|
|
if (size != 4) {
|
|
omap_badwidth_write32(opaque, addr, value);
|
|
return;
|
|
}
|
|
|
|
switch (addr) {
|
|
case 0x00: /* FUNC_MUX_CTRL_0 */
|
|
diff = s->func_mux_ctrl[addr >> 2] ^ value;
|
|
s->func_mux_ctrl[addr >> 2] = value;
|
|
omap_pin_funcmux0_update(s, diff, value);
|
|
return;
|
|
|
|
case 0x04: /* FUNC_MUX_CTRL_1 */
|
|
diff = s->func_mux_ctrl[addr >> 2] ^ value;
|
|
s->func_mux_ctrl[addr >> 2] = value;
|
|
omap_pin_funcmux1_update(s, diff, value);
|
|
return;
|
|
|
|
case 0x08: /* FUNC_MUX_CTRL_2 */
|
|
s->func_mux_ctrl[addr >> 2] = value;
|
|
return;
|
|
|
|
case 0x0c: /* COMP_MODE_CTRL_0 */
|
|
s->comp_mode_ctrl[0] = value;
|
|
s->compat1509 = (value != 0x0000eaef);
|
|
omap_pin_funcmux0_update(s, ~0, s->func_mux_ctrl[0]);
|
|
omap_pin_funcmux1_update(s, ~0, s->func_mux_ctrl[1]);
|
|
return;
|
|
|
|
case 0x10: /* FUNC_MUX_CTRL_3 */
|
|
case 0x14: /* FUNC_MUX_CTRL_4 */
|
|
case 0x18: /* FUNC_MUX_CTRL_5 */
|
|
case 0x1c: /* FUNC_MUX_CTRL_6 */
|
|
case 0x20: /* FUNC_MUX_CTRL_7 */
|
|
case 0x24: /* FUNC_MUX_CTRL_8 */
|
|
case 0x28: /* FUNC_MUX_CTRL_9 */
|
|
case 0x2c: /* FUNC_MUX_CTRL_A */
|
|
case 0x30: /* FUNC_MUX_CTRL_B */
|
|
case 0x34: /* FUNC_MUX_CTRL_C */
|
|
case 0x38: /* FUNC_MUX_CTRL_D */
|
|
s->func_mux_ctrl[(addr >> 2) - 1] = value;
|
|
return;
|
|
|
|
case 0x40: /* PULL_DWN_CTRL_0 */
|
|
case 0x44: /* PULL_DWN_CTRL_1 */
|
|
case 0x48: /* PULL_DWN_CTRL_2 */
|
|
case 0x4c: /* PULL_DWN_CTRL_3 */
|
|
s->pull_dwn_ctrl[(addr & 0xf) >> 2] = value;
|
|
return;
|
|
|
|
case 0x50: /* GATE_INH_CTRL_0 */
|
|
s->gate_inh_ctrl[0] = value;
|
|
return;
|
|
|
|
case 0x60: /* VOLTAGE_CTRL_0 */
|
|
s->voltage_ctrl[0] = value;
|
|
return;
|
|
|
|
case 0x70: /* TEST_DBG_CTRL_0 */
|
|
s->test_dbg_ctrl[0] = value;
|
|
return;
|
|
|
|
case 0x80: /* MOD_CONF_CTRL_0 */
|
|
diff = s->mod_conf_ctrl[0] ^ value;
|
|
s->mod_conf_ctrl[0] = value;
|
|
omap_pin_modconf1_update(s, diff, value);
|
|
return;
|
|
|
|
default:
|
|
OMAP_BAD_REG(addr);
|
|
}
|
|
}
|
|
|
|
static const MemoryRegionOps omap_pin_cfg_ops = {
|
|
.read = omap_pin_cfg_read,
|
|
.write = omap_pin_cfg_write,
|
|
.endianness = DEVICE_NATIVE_ENDIAN,
|
|
};
|
|
|
|
static void omap_pin_cfg_reset(struct omap_mpu_state_s *mpu)
|
|
{
|
|
/* Start in Compatibility Mode. */
|
|
mpu->compat1509 = 1;
|
|
omap_pin_funcmux0_update(mpu, mpu->func_mux_ctrl[0], 0);
|
|
omap_pin_funcmux1_update(mpu, mpu->func_mux_ctrl[1], 0);
|
|
omap_pin_modconf1_update(mpu, mpu->mod_conf_ctrl[0], 0);
|
|
memset(mpu->func_mux_ctrl, 0, sizeof(mpu->func_mux_ctrl));
|
|
memset(mpu->comp_mode_ctrl, 0, sizeof(mpu->comp_mode_ctrl));
|
|
memset(mpu->pull_dwn_ctrl, 0, sizeof(mpu->pull_dwn_ctrl));
|
|
memset(mpu->gate_inh_ctrl, 0, sizeof(mpu->gate_inh_ctrl));
|
|
memset(mpu->voltage_ctrl, 0, sizeof(mpu->voltage_ctrl));
|
|
memset(mpu->test_dbg_ctrl, 0, sizeof(mpu->test_dbg_ctrl));
|
|
memset(mpu->mod_conf_ctrl, 0, sizeof(mpu->mod_conf_ctrl));
|
|
}
|
|
|
|
static void omap_pin_cfg_init(MemoryRegion *system_memory,
|
|
hwaddr base,
|
|
struct omap_mpu_state_s *mpu)
|
|
{
|
|
memory_region_init_io(&mpu->pin_cfg_iomem, NULL, &omap_pin_cfg_ops, mpu,
|
|
"omap-pin-cfg", 0x800);
|
|
memory_region_add_subregion(system_memory, base, &mpu->pin_cfg_iomem);
|
|
omap_pin_cfg_reset(mpu);
|
|
}
|
|
|
|
/* Device Identification, Die Identification */
|
|
static uint64_t omap_id_read(void *opaque, hwaddr addr,
|
|
unsigned size)
|
|
{
|
|
struct omap_mpu_state_s *s = (struct omap_mpu_state_s *) opaque;
|
|
|
|
if (size != 4) {
|
|
return omap_badwidth_read32(opaque, addr);
|
|
}
|
|
|
|
switch (addr) {
|
|
case 0xfffe1800: /* DIE_ID_LSB */
|
|
return 0xc9581f0e;
|
|
case 0xfffe1804: /* DIE_ID_MSB */
|
|
return 0xa8858bfa;
|
|
|
|
case 0xfffe2000: /* PRODUCT_ID_LSB */
|
|
return 0x00aaaafc;
|
|
case 0xfffe2004: /* PRODUCT_ID_MSB */
|
|
return 0xcafeb574;
|
|
|
|
case 0xfffed400: /* JTAG_ID_LSB */
|
|
switch (s->mpu_model) {
|
|
case omap310:
|
|
return 0x03310315;
|
|
case omap1510:
|
|
return 0x03310115;
|
|
default:
|
|
hw_error("%s: bad mpu model\n", __func__);
|
|
}
|
|
break;
|
|
|
|
case 0xfffed404: /* JTAG_ID_MSB */
|
|
switch (s->mpu_model) {
|
|
case omap310:
|
|
return 0xfb57402f;
|
|
case omap1510:
|
|
return 0xfb47002f;
|
|
default:
|
|
hw_error("%s: bad mpu model\n", __func__);
|
|
}
|
|
break;
|
|
}
|
|
|
|
OMAP_BAD_REG(addr);
|
|
return 0;
|
|
}
|
|
|
|
static void omap_id_write(void *opaque, hwaddr addr,
|
|
uint64_t value, unsigned size)
|
|
{
|
|
if (size != 4) {
|
|
omap_badwidth_write32(opaque, addr, value);
|
|
return;
|
|
}
|
|
|
|
OMAP_BAD_REG(addr);
|
|
}
|
|
|
|
static const MemoryRegionOps omap_id_ops = {
|
|
.read = omap_id_read,
|
|
.write = omap_id_write,
|
|
.endianness = DEVICE_NATIVE_ENDIAN,
|
|
};
|
|
|
|
static void omap_id_init(MemoryRegion *memory, struct omap_mpu_state_s *mpu)
|
|
{
|
|
memory_region_init_io(&mpu->id_iomem, NULL, &omap_id_ops, mpu,
|
|
"omap-id", 0x100000000ULL);
|
|
memory_region_init_alias(&mpu->id_iomem_e18, NULL, "omap-id-e18", &mpu->id_iomem,
|
|
0xfffe1800, 0x800);
|
|
memory_region_add_subregion(memory, 0xfffe1800, &mpu->id_iomem_e18);
|
|
memory_region_init_alias(&mpu->id_iomem_ed4, NULL, "omap-id-ed4", &mpu->id_iomem,
|
|
0xfffed400, 0x100);
|
|
memory_region_add_subregion(memory, 0xfffed400, &mpu->id_iomem_ed4);
|
|
if (!cpu_is_omap15xx(mpu)) {
|
|
memory_region_init_alias(&mpu->id_iomem_ed4, NULL, "omap-id-e20",
|
|
&mpu->id_iomem, 0xfffe2000, 0x800);
|
|
memory_region_add_subregion(memory, 0xfffe2000, &mpu->id_iomem_e20);
|
|
}
|
|
}
|
|
|
|
/* MPUI Control (Dummy) */
|
|
static uint64_t omap_mpui_read(void *opaque, hwaddr addr,
|
|
unsigned size)
|
|
{
|
|
struct omap_mpu_state_s *s = (struct omap_mpu_state_s *) opaque;
|
|
|
|
if (size != 4) {
|
|
return omap_badwidth_read32(opaque, addr);
|
|
}
|
|
|
|
switch (addr) {
|
|
case 0x00: /* CTRL */
|
|
return s->mpui_ctrl;
|
|
case 0x04: /* DEBUG_ADDR */
|
|
return 0x01ffffff;
|
|
case 0x08: /* DEBUG_DATA */
|
|
return 0xffffffff;
|
|
case 0x0c: /* DEBUG_FLAG */
|
|
return 0x00000800;
|
|
case 0x10: /* STATUS */
|
|
return 0x00000000;
|
|
|
|
/* Not in OMAP310 */
|
|
case 0x14: /* DSP_STATUS */
|
|
case 0x18: /* DSP_BOOT_CONFIG */
|
|
return 0x00000000;
|
|
case 0x1c: /* DSP_MPUI_CONFIG */
|
|
return 0x0000ffff;
|
|
}
|
|
|
|
OMAP_BAD_REG(addr);
|
|
return 0;
|
|
}
|
|
|
|
static void omap_mpui_write(void *opaque, hwaddr addr,
|
|
uint64_t value, unsigned size)
|
|
{
|
|
struct omap_mpu_state_s *s = (struct omap_mpu_state_s *) opaque;
|
|
|
|
if (size != 4) {
|
|
omap_badwidth_write32(opaque, addr, value);
|
|
return;
|
|
}
|
|
|
|
switch (addr) {
|
|
case 0x00: /* CTRL */
|
|
s->mpui_ctrl = value & 0x007fffff;
|
|
break;
|
|
|
|
case 0x04: /* DEBUG_ADDR */
|
|
case 0x08: /* DEBUG_DATA */
|
|
case 0x0c: /* DEBUG_FLAG */
|
|
case 0x10: /* STATUS */
|
|
/* Not in OMAP310 */
|
|
case 0x14: /* DSP_STATUS */
|
|
OMAP_RO_REG(addr);
|
|
break;
|
|
case 0x18: /* DSP_BOOT_CONFIG */
|
|
case 0x1c: /* DSP_MPUI_CONFIG */
|
|
break;
|
|
|
|
default:
|
|
OMAP_BAD_REG(addr);
|
|
}
|
|
}
|
|
|
|
static const MemoryRegionOps omap_mpui_ops = {
|
|
.read = omap_mpui_read,
|
|
.write = omap_mpui_write,
|
|
.endianness = DEVICE_NATIVE_ENDIAN,
|
|
};
|
|
|
|
static void omap_mpui_reset(struct omap_mpu_state_s *s)
|
|
{
|
|
s->mpui_ctrl = 0x0003ff1b;
|
|
}
|
|
|
|
static void omap_mpui_init(MemoryRegion *memory, hwaddr base,
|
|
struct omap_mpu_state_s *mpu)
|
|
{
|
|
memory_region_init_io(&mpu->mpui_iomem, NULL, &omap_mpui_ops, mpu,
|
|
"omap-mpui", 0x100);
|
|
memory_region_add_subregion(memory, base, &mpu->mpui_iomem);
|
|
|
|
omap_mpui_reset(mpu);
|
|
}
|
|
|
|
/* TIPB Bridges */
|
|
struct omap_tipb_bridge_s {
|
|
qemu_irq abort;
|
|
MemoryRegion iomem;
|
|
|
|
int width_intr;
|
|
uint16_t control;
|
|
uint16_t alloc;
|
|
uint16_t buffer;
|
|
uint16_t enh_control;
|
|
};
|
|
|
|
static uint64_t omap_tipb_bridge_read(void *opaque, hwaddr addr,
|
|
unsigned size)
|
|
{
|
|
struct omap_tipb_bridge_s *s = (struct omap_tipb_bridge_s *) opaque;
|
|
|
|
if (size < 2) {
|
|
return omap_badwidth_read16(opaque, addr);
|
|
}
|
|
|
|
switch (addr) {
|
|
case 0x00: /* TIPB_CNTL */
|
|
return s->control;
|
|
case 0x04: /* TIPB_BUS_ALLOC */
|
|
return s->alloc;
|
|
case 0x08: /* MPU_TIPB_CNTL */
|
|
return s->buffer;
|
|
case 0x0c: /* ENHANCED_TIPB_CNTL */
|
|
return s->enh_control;
|
|
case 0x10: /* ADDRESS_DBG */
|
|
case 0x14: /* DATA_DEBUG_LOW */
|
|
case 0x18: /* DATA_DEBUG_HIGH */
|
|
return 0xffff;
|
|
case 0x1c: /* DEBUG_CNTR_SIG */
|
|
return 0x00f8;
|
|
}
|
|
|
|
OMAP_BAD_REG(addr);
|
|
return 0;
|
|
}
|
|
|
|
static void omap_tipb_bridge_write(void *opaque, hwaddr addr,
|
|
uint64_t value, unsigned size)
|
|
{
|
|
struct omap_tipb_bridge_s *s = (struct omap_tipb_bridge_s *) opaque;
|
|
|
|
if (size < 2) {
|
|
omap_badwidth_write16(opaque, addr, value);
|
|
return;
|
|
}
|
|
|
|
switch (addr) {
|
|
case 0x00: /* TIPB_CNTL */
|
|
s->control = value & 0xffff;
|
|
break;
|
|
|
|
case 0x04: /* TIPB_BUS_ALLOC */
|
|
s->alloc = value & 0x003f;
|
|
break;
|
|
|
|
case 0x08: /* MPU_TIPB_CNTL */
|
|
s->buffer = value & 0x0003;
|
|
break;
|
|
|
|
case 0x0c: /* ENHANCED_TIPB_CNTL */
|
|
s->width_intr = !(value & 2);
|
|
s->enh_control = value & 0x000f;
|
|
break;
|
|
|
|
case 0x10: /* ADDRESS_DBG */
|
|
case 0x14: /* DATA_DEBUG_LOW */
|
|
case 0x18: /* DATA_DEBUG_HIGH */
|
|
case 0x1c: /* DEBUG_CNTR_SIG */
|
|
OMAP_RO_REG(addr);
|
|
break;
|
|
|
|
default:
|
|
OMAP_BAD_REG(addr);
|
|
}
|
|
}
|
|
|
|
static const MemoryRegionOps omap_tipb_bridge_ops = {
|
|
.read = omap_tipb_bridge_read,
|
|
.write = omap_tipb_bridge_write,
|
|
.endianness = DEVICE_NATIVE_ENDIAN,
|
|
};
|
|
|
|
static void omap_tipb_bridge_reset(struct omap_tipb_bridge_s *s)
|
|
{
|
|
s->control = 0xffff;
|
|
s->alloc = 0x0009;
|
|
s->buffer = 0x0000;
|
|
s->enh_control = 0x000f;
|
|
}
|
|
|
|
static struct omap_tipb_bridge_s *omap_tipb_bridge_init(
|
|
MemoryRegion *memory, hwaddr base,
|
|
qemu_irq abort_irq, omap_clk clk)
|
|
{
|
|
struct omap_tipb_bridge_s *s = g_new0(struct omap_tipb_bridge_s, 1);
|
|
|
|
s->abort = abort_irq;
|
|
omap_tipb_bridge_reset(s);
|
|
|
|
memory_region_init_io(&s->iomem, NULL, &omap_tipb_bridge_ops, s,
|
|
"omap-tipb-bridge", 0x100);
|
|
memory_region_add_subregion(memory, base, &s->iomem);
|
|
|
|
return s;
|
|
}
|
|
|
|
/* Dummy Traffic Controller's Memory Interface */
|
|
static uint64_t omap_tcmi_read(void *opaque, hwaddr addr,
|
|
unsigned size)
|
|
{
|
|
struct omap_mpu_state_s *s = (struct omap_mpu_state_s *) opaque;
|
|
uint32_t ret;
|
|
|
|
if (size != 4) {
|
|
return omap_badwidth_read32(opaque, addr);
|
|
}
|
|
|
|
switch (addr) {
|
|
case 0x00: /* IMIF_PRIO */
|
|
case 0x04: /* EMIFS_PRIO */
|
|
case 0x08: /* EMIFF_PRIO */
|
|
case 0x0c: /* EMIFS_CONFIG */
|
|
case 0x10: /* EMIFS_CS0_CONFIG */
|
|
case 0x14: /* EMIFS_CS1_CONFIG */
|
|
case 0x18: /* EMIFS_CS2_CONFIG */
|
|
case 0x1c: /* EMIFS_CS3_CONFIG */
|
|
case 0x24: /* EMIFF_MRS */
|
|
case 0x28: /* TIMEOUT1 */
|
|
case 0x2c: /* TIMEOUT2 */
|
|
case 0x30: /* TIMEOUT3 */
|
|
case 0x3c: /* EMIFF_SDRAM_CONFIG_2 */
|
|
case 0x40: /* EMIFS_CFG_DYN_WAIT */
|
|
return s->tcmi_regs[addr >> 2];
|
|
|
|
case 0x20: /* EMIFF_SDRAM_CONFIG */
|
|
ret = s->tcmi_regs[addr >> 2];
|
|
s->tcmi_regs[addr >> 2] &= ~1; /* XXX: Clear SLRF on SDRAM access */
|
|
/* XXX: We can try using the VGA_DIRTY flag for this */
|
|
return ret;
|
|
}
|
|
|
|
OMAP_BAD_REG(addr);
|
|
return 0;
|
|
}
|
|
|
|
static void omap_tcmi_write(void *opaque, hwaddr addr,
|
|
uint64_t value, unsigned size)
|
|
{
|
|
struct omap_mpu_state_s *s = (struct omap_mpu_state_s *) opaque;
|
|
|
|
if (size != 4) {
|
|
omap_badwidth_write32(opaque, addr, value);
|
|
return;
|
|
}
|
|
|
|
switch (addr) {
|
|
case 0x00: /* IMIF_PRIO */
|
|
case 0x04: /* EMIFS_PRIO */
|
|
case 0x08: /* EMIFF_PRIO */
|
|
case 0x10: /* EMIFS_CS0_CONFIG */
|
|
case 0x14: /* EMIFS_CS1_CONFIG */
|
|
case 0x18: /* EMIFS_CS2_CONFIG */
|
|
case 0x1c: /* EMIFS_CS3_CONFIG */
|
|
case 0x20: /* EMIFF_SDRAM_CONFIG */
|
|
case 0x24: /* EMIFF_MRS */
|
|
case 0x28: /* TIMEOUT1 */
|
|
case 0x2c: /* TIMEOUT2 */
|
|
case 0x30: /* TIMEOUT3 */
|
|
case 0x3c: /* EMIFF_SDRAM_CONFIG_2 */
|
|
case 0x40: /* EMIFS_CFG_DYN_WAIT */
|
|
s->tcmi_regs[addr >> 2] = value;
|
|
break;
|
|
case 0x0c: /* EMIFS_CONFIG */
|
|
s->tcmi_regs[addr >> 2] = (value & 0xf) | (1 << 4);
|
|
break;
|
|
|
|
default:
|
|
OMAP_BAD_REG(addr);
|
|
}
|
|
}
|
|
|
|
static const MemoryRegionOps omap_tcmi_ops = {
|
|
.read = omap_tcmi_read,
|
|
.write = omap_tcmi_write,
|
|
.endianness = DEVICE_NATIVE_ENDIAN,
|
|
};
|
|
|
|
static void omap_tcmi_reset(struct omap_mpu_state_s *mpu)
|
|
{
|
|
mpu->tcmi_regs[0x00 >> 2] = 0x00000000;
|
|
mpu->tcmi_regs[0x04 >> 2] = 0x00000000;
|
|
mpu->tcmi_regs[0x08 >> 2] = 0x00000000;
|
|
mpu->tcmi_regs[0x0c >> 2] = 0x00000010;
|
|
mpu->tcmi_regs[0x10 >> 2] = 0x0010fffb;
|
|
mpu->tcmi_regs[0x14 >> 2] = 0x0010fffb;
|
|
mpu->tcmi_regs[0x18 >> 2] = 0x0010fffb;
|
|
mpu->tcmi_regs[0x1c >> 2] = 0x0010fffb;
|
|
mpu->tcmi_regs[0x20 >> 2] = 0x00618800;
|
|
mpu->tcmi_regs[0x24 >> 2] = 0x00000037;
|
|
mpu->tcmi_regs[0x28 >> 2] = 0x00000000;
|
|
mpu->tcmi_regs[0x2c >> 2] = 0x00000000;
|
|
mpu->tcmi_regs[0x30 >> 2] = 0x00000000;
|
|
mpu->tcmi_regs[0x3c >> 2] = 0x00000003;
|
|
mpu->tcmi_regs[0x40 >> 2] = 0x00000000;
|
|
}
|
|
|
|
static void omap_tcmi_init(MemoryRegion *memory, hwaddr base,
|
|
struct omap_mpu_state_s *mpu)
|
|
{
|
|
memory_region_init_io(&mpu->tcmi_iomem, NULL, &omap_tcmi_ops, mpu,
|
|
"omap-tcmi", 0x100);
|
|
memory_region_add_subregion(memory, base, &mpu->tcmi_iomem);
|
|
omap_tcmi_reset(mpu);
|
|
}
|
|
|
|
/* Digital phase-locked loops control */
|
|
struct dpll_ctl_s {
|
|
MemoryRegion iomem;
|
|
uint16_t mode;
|
|
omap_clk dpll;
|
|
};
|
|
|
|
static uint64_t omap_dpll_read(void *opaque, hwaddr addr,
|
|
unsigned size)
|
|
{
|
|
struct dpll_ctl_s *s = (struct dpll_ctl_s *) opaque;
|
|
|
|
if (size != 2) {
|
|
return omap_badwidth_read16(opaque, addr);
|
|
}
|
|
|
|
if (addr == 0x00) /* CTL_REG */
|
|
return s->mode;
|
|
|
|
OMAP_BAD_REG(addr);
|
|
return 0;
|
|
}
|
|
|
|
static void omap_dpll_write(void *opaque, hwaddr addr,
|
|
uint64_t value, unsigned size)
|
|
{
|
|
struct dpll_ctl_s *s = (struct dpll_ctl_s *) opaque;
|
|
uint16_t diff;
|
|
static const int bypass_div[4] = { 1, 2, 4, 4 };
|
|
int div, mult;
|
|
|
|
if (size != 2) {
|
|
omap_badwidth_write16(opaque, addr, value);
|
|
return;
|
|
}
|
|
|
|
if (addr == 0x00) { /* CTL_REG */
|
|
/* See omap_ulpd_pm_write() too */
|
|
diff = s->mode & value;
|
|
s->mode = value & 0x2fff;
|
|
if (diff & (0x3ff << 2)) {
|
|
if (value & (1 << 4)) { /* PLL_ENABLE */
|
|
div = ((value >> 5) & 3) + 1; /* PLL_DIV */
|
|
mult = MIN((value >> 7) & 0x1f, 1); /* PLL_MULT */
|
|
} else {
|
|
div = bypass_div[((value >> 2) & 3)]; /* BYPASS_DIV */
|
|
mult = 1;
|
|
}
|
|
omap_clk_setrate(s->dpll, div, mult);
|
|
}
|
|
|
|
/* Enter the desired mode. */
|
|
s->mode = (s->mode & 0xfffe) | ((s->mode >> 4) & 1);
|
|
|
|
/* Act as if the lock is restored. */
|
|
s->mode |= 2;
|
|
} else {
|
|
OMAP_BAD_REG(addr);
|
|
}
|
|
}
|
|
|
|
static const MemoryRegionOps omap_dpll_ops = {
|
|
.read = omap_dpll_read,
|
|
.write = omap_dpll_write,
|
|
.endianness = DEVICE_NATIVE_ENDIAN,
|
|
};
|
|
|
|
static void omap_dpll_reset(struct dpll_ctl_s *s)
|
|
{
|
|
s->mode = 0x2002;
|
|
omap_clk_setrate(s->dpll, 1, 1);
|
|
}
|
|
|
|
static struct dpll_ctl_s *omap_dpll_init(MemoryRegion *memory,
|
|
hwaddr base, omap_clk clk)
|
|
{
|
|
struct dpll_ctl_s *s = g_malloc0(sizeof(*s));
|
|
memory_region_init_io(&s->iomem, NULL, &omap_dpll_ops, s, "omap-dpll", 0x100);
|
|
|
|
s->dpll = clk;
|
|
omap_dpll_reset(s);
|
|
|
|
memory_region_add_subregion(memory, base, &s->iomem);
|
|
return s;
|
|
}
|
|
|
|
/* MPU Clock/Reset/Power Mode Control */
|
|
static uint64_t omap_clkm_read(void *opaque, hwaddr addr,
|
|
unsigned size)
|
|
{
|
|
struct omap_mpu_state_s *s = (struct omap_mpu_state_s *) opaque;
|
|
|
|
if (size != 2) {
|
|
return omap_badwidth_read16(opaque, addr);
|
|
}
|
|
|
|
switch (addr) {
|
|
case 0x00: /* ARM_CKCTL */
|
|
return s->clkm.arm_ckctl;
|
|
|
|
case 0x04: /* ARM_IDLECT1 */
|
|
return s->clkm.arm_idlect1;
|
|
|
|
case 0x08: /* ARM_IDLECT2 */
|
|
return s->clkm.arm_idlect2;
|
|
|
|
case 0x0c: /* ARM_EWUPCT */
|
|
return s->clkm.arm_ewupct;
|
|
|
|
case 0x10: /* ARM_RSTCT1 */
|
|
return s->clkm.arm_rstct1;
|
|
|
|
case 0x14: /* ARM_RSTCT2 */
|
|
return s->clkm.arm_rstct2;
|
|
|
|
case 0x18: /* ARM_SYSST */
|
|
return (s->clkm.clocking_scheme << 11) | s->clkm.cold_start;
|
|
|
|
case 0x1c: /* ARM_CKOUT1 */
|
|
return s->clkm.arm_ckout1;
|
|
|
|
case 0x20: /* ARM_CKOUT2 */
|
|
break;
|
|
}
|
|
|
|
OMAP_BAD_REG(addr);
|
|
return 0;
|
|
}
|
|
|
|
static inline void omap_clkm_ckctl_update(struct omap_mpu_state_s *s,
|
|
uint16_t diff, uint16_t value)
|
|
{
|
|
omap_clk clk;
|
|
|
|
if (diff & (1 << 14)) { /* ARM_INTHCK_SEL */
|
|
if (value & (1 << 14))
|
|
/* Reserved */;
|
|
else {
|
|
clk = omap_findclk(s, "arminth_ck");
|
|
omap_clk_reparent(clk, omap_findclk(s, "tc_ck"));
|
|
}
|
|
}
|
|
if (diff & (1 << 12)) { /* ARM_TIMXO */
|
|
clk = omap_findclk(s, "armtim_ck");
|
|
if (value & (1 << 12))
|
|
omap_clk_reparent(clk, omap_findclk(s, "clkin"));
|
|
else
|
|
omap_clk_reparent(clk, omap_findclk(s, "ck_gen1"));
|
|
}
|
|
/* XXX: en_dspck */
|
|
if (diff & (3 << 10)) { /* DSPMMUDIV */
|
|
clk = omap_findclk(s, "dspmmu_ck");
|
|
omap_clk_setrate(clk, 1 << ((value >> 10) & 3), 1);
|
|
}
|
|
if (diff & (3 << 8)) { /* TCDIV */
|
|
clk = omap_findclk(s, "tc_ck");
|
|
omap_clk_setrate(clk, 1 << ((value >> 8) & 3), 1);
|
|
}
|
|
if (diff & (3 << 6)) { /* DSPDIV */
|
|
clk = omap_findclk(s, "dsp_ck");
|
|
omap_clk_setrate(clk, 1 << ((value >> 6) & 3), 1);
|
|
}
|
|
if (diff & (3 << 4)) { /* ARMDIV */
|
|
clk = omap_findclk(s, "arm_ck");
|
|
omap_clk_setrate(clk, 1 << ((value >> 4) & 3), 1);
|
|
}
|
|
if (diff & (3 << 2)) { /* LCDDIV */
|
|
clk = omap_findclk(s, "lcd_ck");
|
|
omap_clk_setrate(clk, 1 << ((value >> 2) & 3), 1);
|
|
}
|
|
if (diff & (3 << 0)) { /* PERDIV */
|
|
clk = omap_findclk(s, "armper_ck");
|
|
omap_clk_setrate(clk, 1 << ((value >> 0) & 3), 1);
|
|
}
|
|
}
|
|
|
|
static inline void omap_clkm_idlect1_update(struct omap_mpu_state_s *s,
|
|
uint16_t diff, uint16_t value)
|
|
{
|
|
omap_clk clk;
|
|
|
|
if (value & (1 << 11)) { /* SETARM_IDLE */
|
|
cpu_interrupt(CPU(s->cpu), CPU_INTERRUPT_HALT);
|
|
}
|
|
if (!(value & (1 << 10))) { /* WKUP_MODE */
|
|
/* XXX: disable wakeup from IRQ */
|
|
qemu_system_shutdown_request(SHUTDOWN_CAUSE_GUEST_SHUTDOWN);
|
|
}
|
|
|
|
#define SET_CANIDLE(clock, bit) \
|
|
if (diff & (1 << bit)) { \
|
|
clk = omap_findclk(s, clock); \
|
|
omap_clk_canidle(clk, (value >> bit) & 1); \
|
|
}
|
|
SET_CANIDLE("mpuwd_ck", 0) /* IDLWDT_ARM */
|
|
SET_CANIDLE("armxor_ck", 1) /* IDLXORP_ARM */
|
|
SET_CANIDLE("mpuper_ck", 2) /* IDLPER_ARM */
|
|
SET_CANIDLE("lcd_ck", 3) /* IDLLCD_ARM */
|
|
SET_CANIDLE("lb_ck", 4) /* IDLLB_ARM */
|
|
SET_CANIDLE("hsab_ck", 5) /* IDLHSAB_ARM */
|
|
SET_CANIDLE("tipb_ck", 6) /* IDLIF_ARM */
|
|
SET_CANIDLE("dma_ck", 6) /* IDLIF_ARM */
|
|
SET_CANIDLE("tc_ck", 6) /* IDLIF_ARM */
|
|
SET_CANIDLE("dpll1", 7) /* IDLDPLL_ARM */
|
|
SET_CANIDLE("dpll2", 7) /* IDLDPLL_ARM */
|
|
SET_CANIDLE("dpll3", 7) /* IDLDPLL_ARM */
|
|
SET_CANIDLE("mpui_ck", 8) /* IDLAPI_ARM */
|
|
SET_CANIDLE("armtim_ck", 9) /* IDLTIM_ARM */
|
|
}
|
|
|
|
static inline void omap_clkm_idlect2_update(struct omap_mpu_state_s *s,
|
|
uint16_t diff, uint16_t value)
|
|
{
|
|
omap_clk clk;
|
|
|
|
#define SET_ONOFF(clock, bit) \
|
|
if (diff & (1 << bit)) { \
|
|
clk = omap_findclk(s, clock); \
|
|
omap_clk_onoff(clk, (value >> bit) & 1); \
|
|
}
|
|
SET_ONOFF("mpuwd_ck", 0) /* EN_WDTCK */
|
|
SET_ONOFF("armxor_ck", 1) /* EN_XORPCK */
|
|
SET_ONOFF("mpuper_ck", 2) /* EN_PERCK */
|
|
SET_ONOFF("lcd_ck", 3) /* EN_LCDCK */
|
|
SET_ONOFF("lb_ck", 4) /* EN_LBCK */
|
|
SET_ONOFF("hsab_ck", 5) /* EN_HSABCK */
|
|
SET_ONOFF("mpui_ck", 6) /* EN_APICK */
|
|
SET_ONOFF("armtim_ck", 7) /* EN_TIMCK */
|
|
SET_CANIDLE("dma_ck", 8) /* DMACK_REQ */
|
|
SET_ONOFF("arm_gpio_ck", 9) /* EN_GPIOCK */
|
|
SET_ONOFF("lbfree_ck", 10) /* EN_LBFREECK */
|
|
}
|
|
|
|
static inline void omap_clkm_ckout1_update(struct omap_mpu_state_s *s,
|
|
uint16_t diff, uint16_t value)
|
|
{
|
|
omap_clk clk;
|
|
|
|
if (diff & (3 << 4)) { /* TCLKOUT */
|
|
clk = omap_findclk(s, "tclk_out");
|
|
switch ((value >> 4) & 3) {
|
|
case 1:
|
|
omap_clk_reparent(clk, omap_findclk(s, "ck_gen3"));
|
|
omap_clk_onoff(clk, 1);
|
|
break;
|
|
case 2:
|
|
omap_clk_reparent(clk, omap_findclk(s, "tc_ck"));
|
|
omap_clk_onoff(clk, 1);
|
|
break;
|
|
default:
|
|
omap_clk_onoff(clk, 0);
|
|
}
|
|
}
|
|
if (diff & (3 << 2)) { /* DCLKOUT */
|
|
clk = omap_findclk(s, "dclk_out");
|
|
switch ((value >> 2) & 3) {
|
|
case 0:
|
|
omap_clk_reparent(clk, omap_findclk(s, "dspmmu_ck"));
|
|
break;
|
|
case 1:
|
|
omap_clk_reparent(clk, omap_findclk(s, "ck_gen2"));
|
|
break;
|
|
case 2:
|
|
omap_clk_reparent(clk, omap_findclk(s, "dsp_ck"));
|
|
break;
|
|
case 3:
|
|
omap_clk_reparent(clk, omap_findclk(s, "ck_ref14"));
|
|
break;
|
|
}
|
|
}
|
|
if (diff & (3 << 0)) { /* ACLKOUT */
|
|
clk = omap_findclk(s, "aclk_out");
|
|
switch ((value >> 0) & 3) {
|
|
case 1:
|
|
omap_clk_reparent(clk, omap_findclk(s, "ck_gen1"));
|
|
omap_clk_onoff(clk, 1);
|
|
break;
|
|
case 2:
|
|
omap_clk_reparent(clk, omap_findclk(s, "arm_ck"));
|
|
omap_clk_onoff(clk, 1);
|
|
break;
|
|
case 3:
|
|
omap_clk_reparent(clk, omap_findclk(s, "ck_ref14"));
|
|
omap_clk_onoff(clk, 1);
|
|
break;
|
|
default:
|
|
omap_clk_onoff(clk, 0);
|
|
}
|
|
}
|
|
}
|
|
|
|
static void omap_clkm_write(void *opaque, hwaddr addr,
|
|
uint64_t value, unsigned size)
|
|
{
|
|
struct omap_mpu_state_s *s = (struct omap_mpu_state_s *) opaque;
|
|
uint16_t diff;
|
|
omap_clk clk;
|
|
static const char *clkschemename[8] = {
|
|
"fully synchronous", "fully asynchronous", "synchronous scalable",
|
|
"mix mode 1", "mix mode 2", "bypass mode", "mix mode 3", "mix mode 4",
|
|
};
|
|
|
|
if (size != 2) {
|
|
omap_badwidth_write16(opaque, addr, value);
|
|
return;
|
|
}
|
|
|
|
switch (addr) {
|
|
case 0x00: /* ARM_CKCTL */
|
|
diff = s->clkm.arm_ckctl ^ value;
|
|
s->clkm.arm_ckctl = value & 0x7fff;
|
|
omap_clkm_ckctl_update(s, diff, value);
|
|
return;
|
|
|
|
case 0x04: /* ARM_IDLECT1 */
|
|
diff = s->clkm.arm_idlect1 ^ value;
|
|
s->clkm.arm_idlect1 = value & 0x0fff;
|
|
omap_clkm_idlect1_update(s, diff, value);
|
|
return;
|
|
|
|
case 0x08: /* ARM_IDLECT2 */
|
|
diff = s->clkm.arm_idlect2 ^ value;
|
|
s->clkm.arm_idlect2 = value & 0x07ff;
|
|
omap_clkm_idlect2_update(s, diff, value);
|
|
return;
|
|
|
|
case 0x0c: /* ARM_EWUPCT */
|
|
s->clkm.arm_ewupct = value & 0x003f;
|
|
return;
|
|
|
|
case 0x10: /* ARM_RSTCT1 */
|
|
diff = s->clkm.arm_rstct1 ^ value;
|
|
s->clkm.arm_rstct1 = value & 0x0007;
|
|
if (value & 9) {
|
|
qemu_system_reset_request(SHUTDOWN_CAUSE_GUEST_RESET);
|
|
s->clkm.cold_start = 0xa;
|
|
}
|
|
if (diff & ~value & 4) { /* DSP_RST */
|
|
omap_mpui_reset(s);
|
|
omap_tipb_bridge_reset(s->private_tipb);
|
|
omap_tipb_bridge_reset(s->public_tipb);
|
|
}
|
|
if (diff & 2) { /* DSP_EN */
|
|
clk = omap_findclk(s, "dsp_ck");
|
|
omap_clk_canidle(clk, (~value >> 1) & 1);
|
|
}
|
|
return;
|
|
|
|
case 0x14: /* ARM_RSTCT2 */
|
|
s->clkm.arm_rstct2 = value & 0x0001;
|
|
return;
|
|
|
|
case 0x18: /* ARM_SYSST */
|
|
if ((s->clkm.clocking_scheme ^ (value >> 11)) & 7) {
|
|
s->clkm.clocking_scheme = (value >> 11) & 7;
|
|
printf("%s: clocking scheme set to %s\n", __func__,
|
|
clkschemename[s->clkm.clocking_scheme]);
|
|
}
|
|
s->clkm.cold_start &= value & 0x3f;
|
|
return;
|
|
|
|
case 0x1c: /* ARM_CKOUT1 */
|
|
diff = s->clkm.arm_ckout1 ^ value;
|
|
s->clkm.arm_ckout1 = value & 0x003f;
|
|
omap_clkm_ckout1_update(s, diff, value);
|
|
return;
|
|
|
|
case 0x20: /* ARM_CKOUT2 */
|
|
default:
|
|
OMAP_BAD_REG(addr);
|
|
}
|
|
}
|
|
|
|
static const MemoryRegionOps omap_clkm_ops = {
|
|
.read = omap_clkm_read,
|
|
.write = omap_clkm_write,
|
|
.endianness = DEVICE_NATIVE_ENDIAN,
|
|
};
|
|
|
|
static uint64_t omap_clkdsp_read(void *opaque, hwaddr addr,
|
|
unsigned size)
|
|
{
|
|
struct omap_mpu_state_s *s = (struct omap_mpu_state_s *) opaque;
|
|
CPUState *cpu = CPU(s->cpu);
|
|
|
|
if (size != 2) {
|
|
return omap_badwidth_read16(opaque, addr);
|
|
}
|
|
|
|
switch (addr) {
|
|
case 0x04: /* DSP_IDLECT1 */
|
|
return s->clkm.dsp_idlect1;
|
|
|
|
case 0x08: /* DSP_IDLECT2 */
|
|
return s->clkm.dsp_idlect2;
|
|
|
|
case 0x14: /* DSP_RSTCT2 */
|
|
return s->clkm.dsp_rstct2;
|
|
|
|
case 0x18: /* DSP_SYSST */
|
|
cpu = CPU(s->cpu);
|
|
return (s->clkm.clocking_scheme << 11) | s->clkm.cold_start |
|
|
(cpu->halted << 6); /* Quite useless... */
|
|
}
|
|
|
|
OMAP_BAD_REG(addr);
|
|
return 0;
|
|
}
|
|
|
|
static inline void omap_clkdsp_idlect1_update(struct omap_mpu_state_s *s,
|
|
uint16_t diff, uint16_t value)
|
|
{
|
|
omap_clk clk;
|
|
|
|
SET_CANIDLE("dspxor_ck", 1); /* IDLXORP_DSP */
|
|
}
|
|
|
|
static inline void omap_clkdsp_idlect2_update(struct omap_mpu_state_s *s,
|
|
uint16_t diff, uint16_t value)
|
|
{
|
|
omap_clk clk;
|
|
|
|
SET_ONOFF("dspxor_ck", 1); /* EN_XORPCK */
|
|
}
|
|
|
|
static void omap_clkdsp_write(void *opaque, hwaddr addr,
|
|
uint64_t value, unsigned size)
|
|
{
|
|
struct omap_mpu_state_s *s = (struct omap_mpu_state_s *) opaque;
|
|
uint16_t diff;
|
|
|
|
if (size != 2) {
|
|
omap_badwidth_write16(opaque, addr, value);
|
|
return;
|
|
}
|
|
|
|
switch (addr) {
|
|
case 0x04: /* DSP_IDLECT1 */
|
|
diff = s->clkm.dsp_idlect1 ^ value;
|
|
s->clkm.dsp_idlect1 = value & 0x01f7;
|
|
omap_clkdsp_idlect1_update(s, diff, value);
|
|
break;
|
|
|
|
case 0x08: /* DSP_IDLECT2 */
|
|
s->clkm.dsp_idlect2 = value & 0x0037;
|
|
diff = s->clkm.dsp_idlect1 ^ value;
|
|
omap_clkdsp_idlect2_update(s, diff, value);
|
|
break;
|
|
|
|
case 0x14: /* DSP_RSTCT2 */
|
|
s->clkm.dsp_rstct2 = value & 0x0001;
|
|
break;
|
|
|
|
case 0x18: /* DSP_SYSST */
|
|
s->clkm.cold_start &= value & 0x3f;
|
|
break;
|
|
|
|
default:
|
|
OMAP_BAD_REG(addr);
|
|
}
|
|
}
|
|
|
|
static const MemoryRegionOps omap_clkdsp_ops = {
|
|
.read = omap_clkdsp_read,
|
|
.write = omap_clkdsp_write,
|
|
.endianness = DEVICE_NATIVE_ENDIAN,
|
|
};
|
|
|
|
static void omap_clkm_reset(struct omap_mpu_state_s *s)
|
|
{
|
|
if (s->wdt && s->wdt->reset)
|
|
s->clkm.cold_start = 0x6;
|
|
s->clkm.clocking_scheme = 0;
|
|
omap_clkm_ckctl_update(s, ~0, 0x3000);
|
|
s->clkm.arm_ckctl = 0x3000;
|
|
omap_clkm_idlect1_update(s, s->clkm.arm_idlect1 ^ 0x0400, 0x0400);
|
|
s->clkm.arm_idlect1 = 0x0400;
|
|
omap_clkm_idlect2_update(s, s->clkm.arm_idlect2 ^ 0x0100, 0x0100);
|
|
s->clkm.arm_idlect2 = 0x0100;
|
|
s->clkm.arm_ewupct = 0x003f;
|
|
s->clkm.arm_rstct1 = 0x0000;
|
|
s->clkm.arm_rstct2 = 0x0000;
|
|
s->clkm.arm_ckout1 = 0x0015;
|
|
s->clkm.dpll1_mode = 0x2002;
|
|
omap_clkdsp_idlect1_update(s, s->clkm.dsp_idlect1 ^ 0x0040, 0x0040);
|
|
s->clkm.dsp_idlect1 = 0x0040;
|
|
omap_clkdsp_idlect2_update(s, ~0, 0x0000);
|
|
s->clkm.dsp_idlect2 = 0x0000;
|
|
s->clkm.dsp_rstct2 = 0x0000;
|
|
}
|
|
|
|
static void omap_clkm_init(MemoryRegion *memory, hwaddr mpu_base,
|
|
hwaddr dsp_base, struct omap_mpu_state_s *s)
|
|
{
|
|
memory_region_init_io(&s->clkm_iomem, NULL, &omap_clkm_ops, s,
|
|
"omap-clkm", 0x100);
|
|
memory_region_init_io(&s->clkdsp_iomem, NULL, &omap_clkdsp_ops, s,
|
|
"omap-clkdsp", 0x1000);
|
|
|
|
s->clkm.arm_idlect1 = 0x03ff;
|
|
s->clkm.arm_idlect2 = 0x0100;
|
|
s->clkm.dsp_idlect1 = 0x0002;
|
|
omap_clkm_reset(s);
|
|
s->clkm.cold_start = 0x3a;
|
|
|
|
memory_region_add_subregion(memory, mpu_base, &s->clkm_iomem);
|
|
memory_region_add_subregion(memory, dsp_base, &s->clkdsp_iomem);
|
|
}
|
|
|
|
/* MPU I/O */
|
|
struct omap_mpuio_s {
|
|
qemu_irq irq;
|
|
qemu_irq kbd_irq;
|
|
qemu_irq *in;
|
|
qemu_irq handler[16];
|
|
qemu_irq wakeup;
|
|
MemoryRegion iomem;
|
|
|
|
uint16_t inputs;
|
|
uint16_t outputs;
|
|
uint16_t dir;
|
|
uint16_t edge;
|
|
uint16_t mask;
|
|
uint16_t ints;
|
|
|
|
uint16_t debounce;
|
|
uint16_t latch;
|
|
uint8_t event;
|
|
|
|
uint8_t buttons[5];
|
|
uint8_t row_latch;
|
|
uint8_t cols;
|
|
int kbd_mask;
|
|
int clk;
|
|
};
|
|
|
|
static void omap_mpuio_set(void *opaque, int line, int level)
|
|
{
|
|
struct omap_mpuio_s *s = (struct omap_mpuio_s *) opaque;
|
|
uint16_t prev = s->inputs;
|
|
|
|
if (level)
|
|
s->inputs |= 1 << line;
|
|
else
|
|
s->inputs &= ~(1 << line);
|
|
|
|
if (((1 << line) & s->dir & ~s->mask) && s->clk) {
|
|
if ((s->edge & s->inputs & ~prev) | (~s->edge & ~s->inputs & prev)) {
|
|
s->ints |= 1 << line;
|
|
qemu_irq_raise(s->irq);
|
|
/* TODO: wakeup */
|
|
}
|
|
if ((s->event & (1 << 0)) && /* SET_GPIO_EVENT_MODE */
|
|
(s->event >> 1) == line) /* PIN_SELECT */
|
|
s->latch = s->inputs;
|
|
}
|
|
}
|
|
|
|
static void omap_mpuio_kbd_update(struct omap_mpuio_s *s)
|
|
{
|
|
int i;
|
|
uint8_t *row, rows = 0, cols = ~s->cols;
|
|
|
|
for (row = s->buttons + 4, i = 1 << 4; i; row --, i >>= 1)
|
|
if (*row & cols)
|
|
rows |= i;
|
|
|
|
qemu_set_irq(s->kbd_irq, rows && !s->kbd_mask && s->clk);
|
|
s->row_latch = ~rows;
|
|
}
|
|
|
|
static uint64_t omap_mpuio_read(void *opaque, hwaddr addr,
|
|
unsigned size)
|
|
{
|
|
struct omap_mpuio_s *s = (struct omap_mpuio_s *) opaque;
|
|
int offset = addr & OMAP_MPUI_REG_MASK;
|
|
uint16_t ret;
|
|
|
|
if (size != 2) {
|
|
return omap_badwidth_read16(opaque, addr);
|
|
}
|
|
|
|
switch (offset) {
|
|
case 0x00: /* INPUT_LATCH */
|
|
return s->inputs;
|
|
|
|
case 0x04: /* OUTPUT_REG */
|
|
return s->outputs;
|
|
|
|
case 0x08: /* IO_CNTL */
|
|
return s->dir;
|
|
|
|
case 0x10: /* KBR_LATCH */
|
|
return s->row_latch;
|
|
|
|
case 0x14: /* KBC_REG */
|
|
return s->cols;
|
|
|
|
case 0x18: /* GPIO_EVENT_MODE_REG */
|
|
return s->event;
|
|
|
|
case 0x1c: /* GPIO_INT_EDGE_REG */
|
|
return s->edge;
|
|
|
|
case 0x20: /* KBD_INT */
|
|
return (~s->row_latch & 0x1f) && !s->kbd_mask;
|
|
|
|
case 0x24: /* GPIO_INT */
|
|
ret = s->ints;
|
|
s->ints &= s->mask;
|
|
if (ret)
|
|
qemu_irq_lower(s->irq);
|
|
return ret;
|
|
|
|
case 0x28: /* KBD_MASKIT */
|
|
return s->kbd_mask;
|
|
|
|
case 0x2c: /* GPIO_MASKIT */
|
|
return s->mask;
|
|
|
|
case 0x30: /* GPIO_DEBOUNCING_REG */
|
|
return s->debounce;
|
|
|
|
case 0x34: /* GPIO_LATCH_REG */
|
|
return s->latch;
|
|
}
|
|
|
|
OMAP_BAD_REG(addr);
|
|
return 0;
|
|
}
|
|
|
|
static void omap_mpuio_write(void *opaque, hwaddr addr,
|
|
uint64_t value, unsigned size)
|
|
{
|
|
struct omap_mpuio_s *s = (struct omap_mpuio_s *) opaque;
|
|
int offset = addr & OMAP_MPUI_REG_MASK;
|
|
uint16_t diff;
|
|
int ln;
|
|
|
|
if (size != 2) {
|
|
omap_badwidth_write16(opaque, addr, value);
|
|
return;
|
|
}
|
|
|
|
switch (offset) {
|
|
case 0x04: /* OUTPUT_REG */
|
|
diff = (s->outputs ^ value) & ~s->dir;
|
|
s->outputs = value;
|
|
while ((ln = ctz32(diff)) != 32) {
|
|
if (s->handler[ln])
|
|
qemu_set_irq(s->handler[ln], (value >> ln) & 1);
|
|
diff &= ~(1 << ln);
|
|
}
|
|
break;
|
|
|
|
case 0x08: /* IO_CNTL */
|
|
diff = s->outputs & (s->dir ^ value);
|
|
s->dir = value;
|
|
|
|
value = s->outputs & ~s->dir;
|
|
while ((ln = ctz32(diff)) != 32) {
|
|
if (s->handler[ln])
|
|
qemu_set_irq(s->handler[ln], (value >> ln) & 1);
|
|
diff &= ~(1 << ln);
|
|
}
|
|
break;
|
|
|
|
case 0x14: /* KBC_REG */
|
|
s->cols = value;
|
|
omap_mpuio_kbd_update(s);
|
|
break;
|
|
|
|
case 0x18: /* GPIO_EVENT_MODE_REG */
|
|
s->event = value & 0x1f;
|
|
break;
|
|
|
|
case 0x1c: /* GPIO_INT_EDGE_REG */
|
|
s->edge = value;
|
|
break;
|
|
|
|
case 0x28: /* KBD_MASKIT */
|
|
s->kbd_mask = value & 1;
|
|
omap_mpuio_kbd_update(s);
|
|
break;
|
|
|
|
case 0x2c: /* GPIO_MASKIT */
|
|
s->mask = value;
|
|
break;
|
|
|
|
case 0x30: /* GPIO_DEBOUNCING_REG */
|
|
s->debounce = value & 0x1ff;
|
|
break;
|
|
|
|
case 0x00: /* INPUT_LATCH */
|
|
case 0x10: /* KBR_LATCH */
|
|
case 0x20: /* KBD_INT */
|
|
case 0x24: /* GPIO_INT */
|
|
case 0x34: /* GPIO_LATCH_REG */
|
|
OMAP_RO_REG(addr);
|
|
return;
|
|
|
|
default:
|
|
OMAP_BAD_REG(addr);
|
|
return;
|
|
}
|
|
}
|
|
|
|
static const MemoryRegionOps omap_mpuio_ops = {
|
|
.read = omap_mpuio_read,
|
|
.write = omap_mpuio_write,
|
|
.endianness = DEVICE_NATIVE_ENDIAN,
|
|
};
|
|
|
|
static void omap_mpuio_reset(struct omap_mpuio_s *s)
|
|
{
|
|
s->inputs = 0;
|
|
s->outputs = 0;
|
|
s->dir = ~0;
|
|
s->event = 0;
|
|
s->edge = 0;
|
|
s->kbd_mask = 0;
|
|
s->mask = 0;
|
|
s->debounce = 0;
|
|
s->latch = 0;
|
|
s->ints = 0;
|
|
s->row_latch = 0x1f;
|
|
s->clk = 1;
|
|
}
|
|
|
|
static void omap_mpuio_onoff(void *opaque, int line, int on)
|
|
{
|
|
struct omap_mpuio_s *s = (struct omap_mpuio_s *) opaque;
|
|
|
|
s->clk = on;
|
|
if (on)
|
|
omap_mpuio_kbd_update(s);
|
|
}
|
|
|
|
static struct omap_mpuio_s *omap_mpuio_init(MemoryRegion *memory,
|
|
hwaddr base,
|
|
qemu_irq kbd_int, qemu_irq gpio_int, qemu_irq wakeup,
|
|
omap_clk clk)
|
|
{
|
|
struct omap_mpuio_s *s = g_new0(struct omap_mpuio_s, 1);
|
|
|
|
s->irq = gpio_int;
|
|
s->kbd_irq = kbd_int;
|
|
s->wakeup = wakeup;
|
|
s->in = qemu_allocate_irqs(omap_mpuio_set, s, 16);
|
|
omap_mpuio_reset(s);
|
|
|
|
memory_region_init_io(&s->iomem, NULL, &omap_mpuio_ops, s,
|
|
"omap-mpuio", 0x800);
|
|
memory_region_add_subregion(memory, base, &s->iomem);
|
|
|
|
omap_clk_adduser(clk, qemu_allocate_irq(omap_mpuio_onoff, s, 0));
|
|
|
|
return s;
|
|
}
|
|
|
|
qemu_irq *omap_mpuio_in_get(struct omap_mpuio_s *s)
|
|
{
|
|
return s->in;
|
|
}
|
|
|
|
void omap_mpuio_out_set(struct omap_mpuio_s *s, int line, qemu_irq handler)
|
|
{
|
|
if (line >= 16 || line < 0)
|
|
hw_error("%s: No GPIO line %i\n", __func__, line);
|
|
s->handler[line] = handler;
|
|
}
|
|
|
|
void omap_mpuio_key(struct omap_mpuio_s *s, int row, int col, int down)
|
|
{
|
|
if (row >= 5 || row < 0)
|
|
hw_error("%s: No key %i-%i\n", __func__, col, row);
|
|
|
|
if (down)
|
|
s->buttons[row] |= 1 << col;
|
|
else
|
|
s->buttons[row] &= ~(1 << col);
|
|
|
|
omap_mpuio_kbd_update(s);
|
|
}
|
|
|
|
/* MicroWire Interface */
|
|
struct omap_uwire_s {
|
|
MemoryRegion iomem;
|
|
qemu_irq txirq;
|
|
qemu_irq rxirq;
|
|
qemu_irq txdrq;
|
|
|
|
uint16_t txbuf;
|
|
uint16_t rxbuf;
|
|
uint16_t control;
|
|
uint16_t setup[5];
|
|
|
|
uWireSlave *chip[4];
|
|
};
|
|
|
|
static void omap_uwire_transfer_start(struct omap_uwire_s *s)
|
|
{
|
|
int chipselect = (s->control >> 10) & 3; /* INDEX */
|
|
uWireSlave *slave = s->chip[chipselect];
|
|
|
|
if ((s->control >> 5) & 0x1f) { /* NB_BITS_WR */
|
|
if (s->control & (1 << 12)) /* CS_CMD */
|
|
if (slave && slave->send)
|
|
slave->send(slave->opaque,
|
|
s->txbuf >> (16 - ((s->control >> 5) & 0x1f)));
|
|
s->control &= ~(1 << 14); /* CSRB */
|
|
/* TODO: depending on s->setup[4] bits [1:0] assert an IRQ or
|
|
* a DRQ. When is the level IRQ supposed to be reset? */
|
|
}
|
|
|
|
if ((s->control >> 0) & 0x1f) { /* NB_BITS_RD */
|
|
if (s->control & (1 << 12)) /* CS_CMD */
|
|
if (slave && slave->receive)
|
|
s->rxbuf = slave->receive(slave->opaque);
|
|
s->control |= 1 << 15; /* RDRB */
|
|
/* TODO: depending on s->setup[4] bits [1:0] assert an IRQ or
|
|
* a DRQ. When is the level IRQ supposed to be reset? */
|
|
}
|
|
}
|
|
|
|
static uint64_t omap_uwire_read(void *opaque, hwaddr addr,
|
|
unsigned size)
|
|
{
|
|
struct omap_uwire_s *s = (struct omap_uwire_s *) opaque;
|
|
int offset = addr & OMAP_MPUI_REG_MASK;
|
|
|
|
if (size != 2) {
|
|
return omap_badwidth_read16(opaque, addr);
|
|
}
|
|
|
|
switch (offset) {
|
|
case 0x00: /* RDR */
|
|
s->control &= ~(1 << 15); /* RDRB */
|
|
return s->rxbuf;
|
|
|
|
case 0x04: /* CSR */
|
|
return s->control;
|
|
|
|
case 0x08: /* SR1 */
|
|
return s->setup[0];
|
|
case 0x0c: /* SR2 */
|
|
return s->setup[1];
|
|
case 0x10: /* SR3 */
|
|
return s->setup[2];
|
|
case 0x14: /* SR4 */
|
|
return s->setup[3];
|
|
case 0x18: /* SR5 */
|
|
return s->setup[4];
|
|
}
|
|
|
|
OMAP_BAD_REG(addr);
|
|
return 0;
|
|
}
|
|
|
|
static void omap_uwire_write(void *opaque, hwaddr addr,
|
|
uint64_t value, unsigned size)
|
|
{
|
|
struct omap_uwire_s *s = (struct omap_uwire_s *) opaque;
|
|
int offset = addr & OMAP_MPUI_REG_MASK;
|
|
|
|
if (size != 2) {
|
|
omap_badwidth_write16(opaque, addr, value);
|
|
return;
|
|
}
|
|
|
|
switch (offset) {
|
|
case 0x00: /* TDR */
|
|
s->txbuf = value; /* TD */
|
|
if ((s->setup[4] & (1 << 2)) && /* AUTO_TX_EN */
|
|
((s->setup[4] & (1 << 3)) || /* CS_TOGGLE_TX_EN */
|
|
(s->control & (1 << 12)))) { /* CS_CMD */
|
|
s->control |= 1 << 14; /* CSRB */
|
|
omap_uwire_transfer_start(s);
|
|
}
|
|
break;
|
|
|
|
case 0x04: /* CSR */
|
|
s->control = value & 0x1fff;
|
|
if (value & (1 << 13)) /* START */
|
|
omap_uwire_transfer_start(s);
|
|
break;
|
|
|
|
case 0x08: /* SR1 */
|
|
s->setup[0] = value & 0x003f;
|
|
break;
|
|
|
|
case 0x0c: /* SR2 */
|
|
s->setup[1] = value & 0x0fc0;
|
|
break;
|
|
|
|
case 0x10: /* SR3 */
|
|
s->setup[2] = value & 0x0003;
|
|
break;
|
|
|
|
case 0x14: /* SR4 */
|
|
s->setup[3] = value & 0x0001;
|
|
break;
|
|
|
|
case 0x18: /* SR5 */
|
|
s->setup[4] = value & 0x000f;
|
|
break;
|
|
|
|
default:
|
|
OMAP_BAD_REG(addr);
|
|
return;
|
|
}
|
|
}
|
|
|
|
static const MemoryRegionOps omap_uwire_ops = {
|
|
.read = omap_uwire_read,
|
|
.write = omap_uwire_write,
|
|
.endianness = DEVICE_NATIVE_ENDIAN,
|
|
};
|
|
|
|
static void omap_uwire_reset(struct omap_uwire_s *s)
|
|
{
|
|
s->control = 0;
|
|
s->setup[0] = 0;
|
|
s->setup[1] = 0;
|
|
s->setup[2] = 0;
|
|
s->setup[3] = 0;
|
|
s->setup[4] = 0;
|
|
}
|
|
|
|
static struct omap_uwire_s *omap_uwire_init(MemoryRegion *system_memory,
|
|
hwaddr base,
|
|
qemu_irq txirq, qemu_irq rxirq,
|
|
qemu_irq dma,
|
|
omap_clk clk)
|
|
{
|
|
struct omap_uwire_s *s = g_new0(struct omap_uwire_s, 1);
|
|
|
|
s->txirq = txirq;
|
|
s->rxirq = rxirq;
|
|
s->txdrq = dma;
|
|
omap_uwire_reset(s);
|
|
|
|
memory_region_init_io(&s->iomem, NULL, &omap_uwire_ops, s, "omap-uwire", 0x800);
|
|
memory_region_add_subregion(system_memory, base, &s->iomem);
|
|
|
|
return s;
|
|
}
|
|
|
|
void omap_uwire_attach(struct omap_uwire_s *s,
|
|
uWireSlave *slave, int chipselect)
|
|
{
|
|
if (chipselect < 0 || chipselect > 3) {
|
|
error_report("%s: Bad chipselect %i", __func__, chipselect);
|
|
exit(-1);
|
|
}
|
|
|
|
s->chip[chipselect] = slave;
|
|
}
|
|
|
|
/* Pseudonoise Pulse-Width Light Modulator */
|
|
struct omap_pwl_s {
|
|
MemoryRegion iomem;
|
|
uint8_t output;
|
|
uint8_t level;
|
|
uint8_t enable;
|
|
int clk;
|
|
};
|
|
|
|
static void omap_pwl_update(struct omap_pwl_s *s)
|
|
{
|
|
int output = (s->clk && s->enable) ? s->level : 0;
|
|
|
|
if (output != s->output) {
|
|
s->output = output;
|
|
printf("%s: Backlight now at %i/256\n", __func__, output);
|
|
}
|
|
}
|
|
|
|
static uint64_t omap_pwl_read(void *opaque, hwaddr addr,
|
|
unsigned size)
|
|
{
|
|
struct omap_pwl_s *s = (struct omap_pwl_s *) opaque;
|
|
int offset = addr & OMAP_MPUI_REG_MASK;
|
|
|
|
if (size != 1) {
|
|
return omap_badwidth_read8(opaque, addr);
|
|
}
|
|
|
|
switch (offset) {
|
|
case 0x00: /* PWL_LEVEL */
|
|
return s->level;
|
|
case 0x04: /* PWL_CTRL */
|
|
return s->enable;
|
|
}
|
|
OMAP_BAD_REG(addr);
|
|
return 0;
|
|
}
|
|
|
|
static void omap_pwl_write(void *opaque, hwaddr addr,
|
|
uint64_t value, unsigned size)
|
|
{
|
|
struct omap_pwl_s *s = (struct omap_pwl_s *) opaque;
|
|
int offset = addr & OMAP_MPUI_REG_MASK;
|
|
|
|
if (size != 1) {
|
|
omap_badwidth_write8(opaque, addr, value);
|
|
return;
|
|
}
|
|
|
|
switch (offset) {
|
|
case 0x00: /* PWL_LEVEL */
|
|
s->level = value;
|
|
omap_pwl_update(s);
|
|
break;
|
|
case 0x04: /* PWL_CTRL */
|
|
s->enable = value & 1;
|
|
omap_pwl_update(s);
|
|
break;
|
|
default:
|
|
OMAP_BAD_REG(addr);
|
|
return;
|
|
}
|
|
}
|
|
|
|
static const MemoryRegionOps omap_pwl_ops = {
|
|
.read = omap_pwl_read,
|
|
.write = omap_pwl_write,
|
|
.endianness = DEVICE_NATIVE_ENDIAN,
|
|
};
|
|
|
|
static void omap_pwl_reset(struct omap_pwl_s *s)
|
|
{
|
|
s->output = 0;
|
|
s->level = 0;
|
|
s->enable = 0;
|
|
s->clk = 1;
|
|
omap_pwl_update(s);
|
|
}
|
|
|
|
static void omap_pwl_clk_update(void *opaque, int line, int on)
|
|
{
|
|
struct omap_pwl_s *s = (struct omap_pwl_s *) opaque;
|
|
|
|
s->clk = on;
|
|
omap_pwl_update(s);
|
|
}
|
|
|
|
static struct omap_pwl_s *omap_pwl_init(MemoryRegion *system_memory,
|
|
hwaddr base,
|
|
omap_clk clk)
|
|
{
|
|
struct omap_pwl_s *s = g_malloc0(sizeof(*s));
|
|
|
|
omap_pwl_reset(s);
|
|
|
|
memory_region_init_io(&s->iomem, NULL, &omap_pwl_ops, s,
|
|
"omap-pwl", 0x800);
|
|
memory_region_add_subregion(system_memory, base, &s->iomem);
|
|
|
|
omap_clk_adduser(clk, qemu_allocate_irq(omap_pwl_clk_update, s, 0));
|
|
return s;
|
|
}
|
|
|
|
/* Pulse-Width Tone module */
|
|
struct omap_pwt_s {
|
|
MemoryRegion iomem;
|
|
uint8_t frc;
|
|
uint8_t vrc;
|
|
uint8_t gcr;
|
|
omap_clk clk;
|
|
};
|
|
|
|
static uint64_t omap_pwt_read(void *opaque, hwaddr addr,
|
|
unsigned size)
|
|
{
|
|
struct omap_pwt_s *s = (struct omap_pwt_s *) opaque;
|
|
int offset = addr & OMAP_MPUI_REG_MASK;
|
|
|
|
if (size != 1) {
|
|
return omap_badwidth_read8(opaque, addr);
|
|
}
|
|
|
|
switch (offset) {
|
|
case 0x00: /* FRC */
|
|
return s->frc;
|
|
case 0x04: /* VCR */
|
|
return s->vrc;
|
|
case 0x08: /* GCR */
|
|
return s->gcr;
|
|
}
|
|
OMAP_BAD_REG(addr);
|
|
return 0;
|
|
}
|
|
|
|
static void omap_pwt_write(void *opaque, hwaddr addr,
|
|
uint64_t value, unsigned size)
|
|
{
|
|
struct omap_pwt_s *s = (struct omap_pwt_s *) opaque;
|
|
int offset = addr & OMAP_MPUI_REG_MASK;
|
|
|
|
if (size != 1) {
|
|
omap_badwidth_write8(opaque, addr, value);
|
|
return;
|
|
}
|
|
|
|
switch (offset) {
|
|
case 0x00: /* FRC */
|
|
s->frc = value & 0x3f;
|
|
break;
|
|
case 0x04: /* VRC */
|
|
if ((value ^ s->vrc) & 1) {
|
|
if (value & 1)
|
|
printf("%s: %iHz buzz on\n", __func__, (int)
|
|
/* 1.5 MHz from a 12-MHz or 13-MHz PWT_CLK */
|
|
((omap_clk_getrate(s->clk) >> 3) /
|
|
/* Pre-multiplexer divider */
|
|
((s->gcr & 2) ? 1 : 154) /
|
|
/* Octave multiplexer */
|
|
(2 << (value & 3)) *
|
|
/* 101/107 divider */
|
|
((value & (1 << 2)) ? 101 : 107) *
|
|
/* 49/55 divider */
|
|
((value & (1 << 3)) ? 49 : 55) *
|
|
/* 50/63 divider */
|
|
((value & (1 << 4)) ? 50 : 63) *
|
|
/* 80/127 divider */
|
|
((value & (1 << 5)) ? 80 : 127) /
|
|
(107 * 55 * 63 * 127)));
|
|
else
|
|
printf("%s: silence!\n", __func__);
|
|
}
|
|
s->vrc = value & 0x7f;
|
|
break;
|
|
case 0x08: /* GCR */
|
|
s->gcr = value & 3;
|
|
break;
|
|
default:
|
|
OMAP_BAD_REG(addr);
|
|
return;
|
|
}
|
|
}
|
|
|
|
static const MemoryRegionOps omap_pwt_ops = {
|
|
.read =omap_pwt_read,
|
|
.write = omap_pwt_write,
|
|
.endianness = DEVICE_NATIVE_ENDIAN,
|
|
};
|
|
|
|
static void omap_pwt_reset(struct omap_pwt_s *s)
|
|
{
|
|
s->frc = 0;
|
|
s->vrc = 0;
|
|
s->gcr = 0;
|
|
}
|
|
|
|
static struct omap_pwt_s *omap_pwt_init(MemoryRegion *system_memory,
|
|
hwaddr base,
|
|
omap_clk clk)
|
|
{
|
|
struct omap_pwt_s *s = g_malloc0(sizeof(*s));
|
|
s->clk = clk;
|
|
omap_pwt_reset(s);
|
|
|
|
memory_region_init_io(&s->iomem, NULL, &omap_pwt_ops, s,
|
|
"omap-pwt", 0x800);
|
|
memory_region_add_subregion(system_memory, base, &s->iomem);
|
|
return s;
|
|
}
|
|
|
|
/* Real-time Clock module */
|
|
struct omap_rtc_s {
|
|
MemoryRegion iomem;
|
|
qemu_irq irq;
|
|
qemu_irq alarm;
|
|
QEMUTimer *clk;
|
|
|
|
uint8_t interrupts;
|
|
uint8_t status;
|
|
int16_t comp_reg;
|
|
int running;
|
|
int pm_am;
|
|
int auto_comp;
|
|
int round;
|
|
struct tm alarm_tm;
|
|
time_t alarm_ti;
|
|
|
|
struct tm current_tm;
|
|
time_t ti;
|
|
uint64_t tick;
|
|
};
|
|
|
|
static void omap_rtc_interrupts_update(struct omap_rtc_s *s)
|
|
{
|
|
/* s->alarm is level-triggered */
|
|
qemu_set_irq(s->alarm, (s->status >> 6) & 1);
|
|
}
|
|
|
|
static void omap_rtc_alarm_update(struct omap_rtc_s *s)
|
|
{
|
|
s->alarm_ti = mktimegm(&s->alarm_tm);
|
|
if (s->alarm_ti == -1)
|
|
printf("%s: conversion failed\n", __func__);
|
|
}
|
|
|
|
static uint64_t omap_rtc_read(void *opaque, hwaddr addr,
|
|
unsigned size)
|
|
{
|
|
struct omap_rtc_s *s = (struct omap_rtc_s *) opaque;
|
|
int offset = addr & OMAP_MPUI_REG_MASK;
|
|
uint8_t i;
|
|
|
|
if (size != 1) {
|
|
return omap_badwidth_read8(opaque, addr);
|
|
}
|
|
|
|
switch (offset) {
|
|
case 0x00: /* SECONDS_REG */
|
|
return to_bcd(s->current_tm.tm_sec);
|
|
|
|
case 0x04: /* MINUTES_REG */
|
|
return to_bcd(s->current_tm.tm_min);
|
|
|
|
case 0x08: /* HOURS_REG */
|
|
if (s->pm_am)
|
|
return ((s->current_tm.tm_hour > 11) << 7) |
|
|
to_bcd(((s->current_tm.tm_hour - 1) % 12) + 1);
|
|
else
|
|
return to_bcd(s->current_tm.tm_hour);
|
|
|
|
case 0x0c: /* DAYS_REG */
|
|
return to_bcd(s->current_tm.tm_mday);
|
|
|
|
case 0x10: /* MONTHS_REG */
|
|
return to_bcd(s->current_tm.tm_mon + 1);
|
|
|
|
case 0x14: /* YEARS_REG */
|
|
return to_bcd(s->current_tm.tm_year % 100);
|
|
|
|
case 0x18: /* WEEK_REG */
|
|
return s->current_tm.tm_wday;
|
|
|
|
case 0x20: /* ALARM_SECONDS_REG */
|
|
return to_bcd(s->alarm_tm.tm_sec);
|
|
|
|
case 0x24: /* ALARM_MINUTES_REG */
|
|
return to_bcd(s->alarm_tm.tm_min);
|
|
|
|
case 0x28: /* ALARM_HOURS_REG */
|
|
if (s->pm_am)
|
|
return ((s->alarm_tm.tm_hour > 11) << 7) |
|
|
to_bcd(((s->alarm_tm.tm_hour - 1) % 12) + 1);
|
|
else
|
|
return to_bcd(s->alarm_tm.tm_hour);
|
|
|
|
case 0x2c: /* ALARM_DAYS_REG */
|
|
return to_bcd(s->alarm_tm.tm_mday);
|
|
|
|
case 0x30: /* ALARM_MONTHS_REG */
|
|
return to_bcd(s->alarm_tm.tm_mon + 1);
|
|
|
|
case 0x34: /* ALARM_YEARS_REG */
|
|
return to_bcd(s->alarm_tm.tm_year % 100);
|
|
|
|
case 0x40: /* RTC_CTRL_REG */
|
|
return (s->pm_am << 3) | (s->auto_comp << 2) |
|
|
(s->round << 1) | s->running;
|
|
|
|
case 0x44: /* RTC_STATUS_REG */
|
|
i = s->status;
|
|
s->status &= ~0x3d;
|
|
return i;
|
|
|
|
case 0x48: /* RTC_INTERRUPTS_REG */
|
|
return s->interrupts;
|
|
|
|
case 0x4c: /* RTC_COMP_LSB_REG */
|
|
return ((uint16_t) s->comp_reg) & 0xff;
|
|
|
|
case 0x50: /* RTC_COMP_MSB_REG */
|
|
return ((uint16_t) s->comp_reg) >> 8;
|
|
}
|
|
|
|
OMAP_BAD_REG(addr);
|
|
return 0;
|
|
}
|
|
|
|
static void omap_rtc_write(void *opaque, hwaddr addr,
|
|
uint64_t value, unsigned size)
|
|
{
|
|
struct omap_rtc_s *s = (struct omap_rtc_s *) opaque;
|
|
int offset = addr & OMAP_MPUI_REG_MASK;
|
|
struct tm new_tm;
|
|
time_t ti[2];
|
|
|
|
if (size != 1) {
|
|
omap_badwidth_write8(opaque, addr, value);
|
|
return;
|
|
}
|
|
|
|
switch (offset) {
|
|
case 0x00: /* SECONDS_REG */
|
|
#ifdef ALMDEBUG
|
|
printf("RTC SEC_REG <-- %02x\n", value);
|
|
#endif
|
|
s->ti -= s->current_tm.tm_sec;
|
|
s->ti += from_bcd(value);
|
|
return;
|
|
|
|
case 0x04: /* MINUTES_REG */
|
|
#ifdef ALMDEBUG
|
|
printf("RTC MIN_REG <-- %02x\n", value);
|
|
#endif
|
|
s->ti -= s->current_tm.tm_min * 60;
|
|
s->ti += from_bcd(value) * 60;
|
|
return;
|
|
|
|
case 0x08: /* HOURS_REG */
|
|
#ifdef ALMDEBUG
|
|
printf("RTC HRS_REG <-- %02x\n", value);
|
|
#endif
|
|
s->ti -= s->current_tm.tm_hour * 3600;
|
|
if (s->pm_am) {
|
|
s->ti += (from_bcd(value & 0x3f) & 12) * 3600;
|
|
s->ti += ((value >> 7) & 1) * 43200;
|
|
} else
|
|
s->ti += from_bcd(value & 0x3f) * 3600;
|
|
return;
|
|
|
|
case 0x0c: /* DAYS_REG */
|
|
#ifdef ALMDEBUG
|
|
printf("RTC DAY_REG <-- %02x\n", value);
|
|
#endif
|
|
s->ti -= s->current_tm.tm_mday * 86400;
|
|
s->ti += from_bcd(value) * 86400;
|
|
return;
|
|
|
|
case 0x10: /* MONTHS_REG */
|
|
#ifdef ALMDEBUG
|
|
printf("RTC MTH_REG <-- %02x\n", value);
|
|
#endif
|
|
memcpy(&new_tm, &s->current_tm, sizeof(new_tm));
|
|
new_tm.tm_mon = from_bcd(value);
|
|
ti[0] = mktimegm(&s->current_tm);
|
|
ti[1] = mktimegm(&new_tm);
|
|
|
|
if (ti[0] != -1 && ti[1] != -1) {
|
|
s->ti -= ti[0];
|
|
s->ti += ti[1];
|
|
} else {
|
|
/* A less accurate version */
|
|
s->ti -= s->current_tm.tm_mon * 2592000;
|
|
s->ti += from_bcd(value) * 2592000;
|
|
}
|
|
return;
|
|
|
|
case 0x14: /* YEARS_REG */
|
|
#ifdef ALMDEBUG
|
|
printf("RTC YRS_REG <-- %02x\n", value);
|
|
#endif
|
|
memcpy(&new_tm, &s->current_tm, sizeof(new_tm));
|
|
new_tm.tm_year += from_bcd(value) - (new_tm.tm_year % 100);
|
|
ti[0] = mktimegm(&s->current_tm);
|
|
ti[1] = mktimegm(&new_tm);
|
|
|
|
if (ti[0] != -1 && ti[1] != -1) {
|
|
s->ti -= ti[0];
|
|
s->ti += ti[1];
|
|
} else {
|
|
/* A less accurate version */
|
|
s->ti -= (time_t)(s->current_tm.tm_year % 100) * 31536000;
|
|
s->ti += (time_t)from_bcd(value) * 31536000;
|
|
}
|
|
return;
|
|
|
|
case 0x18: /* WEEK_REG */
|
|
return; /* Ignored */
|
|
|
|
case 0x20: /* ALARM_SECONDS_REG */
|
|
#ifdef ALMDEBUG
|
|
printf("ALM SEC_REG <-- %02x\n", value);
|
|
#endif
|
|
s->alarm_tm.tm_sec = from_bcd(value);
|
|
omap_rtc_alarm_update(s);
|
|
return;
|
|
|
|
case 0x24: /* ALARM_MINUTES_REG */
|
|
#ifdef ALMDEBUG
|
|
printf("ALM MIN_REG <-- %02x\n", value);
|
|
#endif
|
|
s->alarm_tm.tm_min = from_bcd(value);
|
|
omap_rtc_alarm_update(s);
|
|
return;
|
|
|
|
case 0x28: /* ALARM_HOURS_REG */
|
|
#ifdef ALMDEBUG
|
|
printf("ALM HRS_REG <-- %02x\n", value);
|
|
#endif
|
|
if (s->pm_am)
|
|
s->alarm_tm.tm_hour =
|
|
((from_bcd(value & 0x3f)) % 12) +
|
|
((value >> 7) & 1) * 12;
|
|
else
|
|
s->alarm_tm.tm_hour = from_bcd(value);
|
|
omap_rtc_alarm_update(s);
|
|
return;
|
|
|
|
case 0x2c: /* ALARM_DAYS_REG */
|
|
#ifdef ALMDEBUG
|
|
printf("ALM DAY_REG <-- %02x\n", value);
|
|
#endif
|
|
s->alarm_tm.tm_mday = from_bcd(value);
|
|
omap_rtc_alarm_update(s);
|
|
return;
|
|
|
|
case 0x30: /* ALARM_MONTHS_REG */
|
|
#ifdef ALMDEBUG
|
|
printf("ALM MON_REG <-- %02x\n", value);
|
|
#endif
|
|
s->alarm_tm.tm_mon = from_bcd(value);
|
|
omap_rtc_alarm_update(s);
|
|
return;
|
|
|
|
case 0x34: /* ALARM_YEARS_REG */
|
|
#ifdef ALMDEBUG
|
|
printf("ALM YRS_REG <-- %02x\n", value);
|
|
#endif
|
|
s->alarm_tm.tm_year = from_bcd(value);
|
|
omap_rtc_alarm_update(s);
|
|
return;
|
|
|
|
case 0x40: /* RTC_CTRL_REG */
|
|
#ifdef ALMDEBUG
|
|
printf("RTC CONTROL <-- %02x\n", value);
|
|
#endif
|
|
s->pm_am = (value >> 3) & 1;
|
|
s->auto_comp = (value >> 2) & 1;
|
|
s->round = (value >> 1) & 1;
|
|
s->running = value & 1;
|
|
s->status &= 0xfd;
|
|
s->status |= s->running << 1;
|
|
return;
|
|
|
|
case 0x44: /* RTC_STATUS_REG */
|
|
#ifdef ALMDEBUG
|
|
printf("RTC STATUSL <-- %02x\n", value);
|
|
#endif
|
|
s->status &= ~((value & 0xc0) ^ 0x80);
|
|
omap_rtc_interrupts_update(s);
|
|
return;
|
|
|
|
case 0x48: /* RTC_INTERRUPTS_REG */
|
|
#ifdef ALMDEBUG
|
|
printf("RTC INTRS <-- %02x\n", value);
|
|
#endif
|
|
s->interrupts = value;
|
|
return;
|
|
|
|
case 0x4c: /* RTC_COMP_LSB_REG */
|
|
#ifdef ALMDEBUG
|
|
printf("RTC COMPLSB <-- %02x\n", value);
|
|
#endif
|
|
s->comp_reg &= 0xff00;
|
|
s->comp_reg |= 0x00ff & value;
|
|
return;
|
|
|
|
case 0x50: /* RTC_COMP_MSB_REG */
|
|
#ifdef ALMDEBUG
|
|
printf("RTC COMPMSB <-- %02x\n", value);
|
|
#endif
|
|
s->comp_reg &= 0x00ff;
|
|
s->comp_reg |= 0xff00 & (value << 8);
|
|
return;
|
|
|
|
default:
|
|
OMAP_BAD_REG(addr);
|
|
return;
|
|
}
|
|
}
|
|
|
|
static const MemoryRegionOps omap_rtc_ops = {
|
|
.read = omap_rtc_read,
|
|
.write = omap_rtc_write,
|
|
.endianness = DEVICE_NATIVE_ENDIAN,
|
|
};
|
|
|
|
static void omap_rtc_tick(void *opaque)
|
|
{
|
|
struct omap_rtc_s *s = opaque;
|
|
|
|
if (s->round) {
|
|
/* Round to nearest full minute. */
|
|
if (s->current_tm.tm_sec < 30)
|
|
s->ti -= s->current_tm.tm_sec;
|
|
else
|
|
s->ti += 60 - s->current_tm.tm_sec;
|
|
|
|
s->round = 0;
|
|
}
|
|
|
|
localtime_r(&s->ti, &s->current_tm);
|
|
|
|
if ((s->interrupts & 0x08) && s->ti == s->alarm_ti) {
|
|
s->status |= 0x40;
|
|
omap_rtc_interrupts_update(s);
|
|
}
|
|
|
|
if (s->interrupts & 0x04)
|
|
switch (s->interrupts & 3) {
|
|
case 0:
|
|
s->status |= 0x04;
|
|
qemu_irq_pulse(s->irq);
|
|
break;
|
|
case 1:
|
|
if (s->current_tm.tm_sec)
|
|
break;
|
|
s->status |= 0x08;
|
|
qemu_irq_pulse(s->irq);
|
|
break;
|
|
case 2:
|
|
if (s->current_tm.tm_sec || s->current_tm.tm_min)
|
|
break;
|
|
s->status |= 0x10;
|
|
qemu_irq_pulse(s->irq);
|
|
break;
|
|
case 3:
|
|
if (s->current_tm.tm_sec ||
|
|
s->current_tm.tm_min || s->current_tm.tm_hour)
|
|
break;
|
|
s->status |= 0x20;
|
|
qemu_irq_pulse(s->irq);
|
|
break;
|
|
}
|
|
|
|
/* Move on */
|
|
if (s->running)
|
|
s->ti ++;
|
|
s->tick += 1000;
|
|
|
|
/*
|
|
* Every full hour add a rough approximation of the compensation
|
|
* register to the 32kHz Timer (which drives the RTC) value.
|
|
*/
|
|
if (s->auto_comp && !s->current_tm.tm_sec && !s->current_tm.tm_min)
|
|
s->tick += s->comp_reg * 1000 / 32768;
|
|
|
|
timer_mod(s->clk, s->tick);
|
|
}
|
|
|
|
static void omap_rtc_reset(struct omap_rtc_s *s)
|
|
{
|
|
struct tm tm;
|
|
|
|
s->interrupts = 0;
|
|
s->comp_reg = 0;
|
|
s->running = 0;
|
|
s->pm_am = 0;
|
|
s->auto_comp = 0;
|
|
s->round = 0;
|
|
s->tick = qemu_clock_get_ms(rtc_clock);
|
|
memset(&s->alarm_tm, 0, sizeof(s->alarm_tm));
|
|
s->alarm_tm.tm_mday = 0x01;
|
|
s->status = 1 << 7;
|
|
qemu_get_timedate(&tm, 0);
|
|
s->ti = mktimegm(&tm);
|
|
|
|
omap_rtc_alarm_update(s);
|
|
omap_rtc_tick(s);
|
|
}
|
|
|
|
static struct omap_rtc_s *omap_rtc_init(MemoryRegion *system_memory,
|
|
hwaddr base,
|
|
qemu_irq timerirq, qemu_irq alarmirq,
|
|
omap_clk clk)
|
|
{
|
|
struct omap_rtc_s *s = g_new0(struct omap_rtc_s, 1);
|
|
|
|
s->irq = timerirq;
|
|
s->alarm = alarmirq;
|
|
s->clk = timer_new_ms(rtc_clock, omap_rtc_tick, s);
|
|
|
|
omap_rtc_reset(s);
|
|
|
|
memory_region_init_io(&s->iomem, NULL, &omap_rtc_ops, s,
|
|
"omap-rtc", 0x800);
|
|
memory_region_add_subregion(system_memory, base, &s->iomem);
|
|
|
|
return s;
|
|
}
|
|
|
|
/* Multi-channel Buffered Serial Port interfaces */
|
|
struct omap_mcbsp_s {
|
|
MemoryRegion iomem;
|
|
qemu_irq txirq;
|
|
qemu_irq rxirq;
|
|
qemu_irq txdrq;
|
|
qemu_irq rxdrq;
|
|
|
|
uint16_t spcr[2];
|
|
uint16_t rcr[2];
|
|
uint16_t xcr[2];
|
|
uint16_t srgr[2];
|
|
uint16_t mcr[2];
|
|
uint16_t pcr;
|
|
uint16_t rcer[8];
|
|
uint16_t xcer[8];
|
|
int tx_rate;
|
|
int rx_rate;
|
|
int tx_req;
|
|
int rx_req;
|
|
|
|
I2SCodec *codec;
|
|
QEMUTimer *source_timer;
|
|
QEMUTimer *sink_timer;
|
|
};
|
|
|
|
static void omap_mcbsp_intr_update(struct omap_mcbsp_s *s)
|
|
{
|
|
int irq;
|
|
|
|
switch ((s->spcr[0] >> 4) & 3) { /* RINTM */
|
|
case 0:
|
|
irq = (s->spcr[0] >> 1) & 1; /* RRDY */
|
|
break;
|
|
case 3:
|
|
irq = (s->spcr[0] >> 3) & 1; /* RSYNCERR */
|
|
break;
|
|
default:
|
|
irq = 0;
|
|
break;
|
|
}
|
|
|
|
if (irq)
|
|
qemu_irq_pulse(s->rxirq);
|
|
|
|
switch ((s->spcr[1] >> 4) & 3) { /* XINTM */
|
|
case 0:
|
|
irq = (s->spcr[1] >> 1) & 1; /* XRDY */
|
|
break;
|
|
case 3:
|
|
irq = (s->spcr[1] >> 3) & 1; /* XSYNCERR */
|
|
break;
|
|
default:
|
|
irq = 0;
|
|
break;
|
|
}
|
|
|
|
if (irq)
|
|
qemu_irq_pulse(s->txirq);
|
|
}
|
|
|
|
static void omap_mcbsp_rx_newdata(struct omap_mcbsp_s *s)
|
|
{
|
|
if ((s->spcr[0] >> 1) & 1) /* RRDY */
|
|
s->spcr[0] |= 1 << 2; /* RFULL */
|
|
s->spcr[0] |= 1 << 1; /* RRDY */
|
|
qemu_irq_raise(s->rxdrq);
|
|
omap_mcbsp_intr_update(s);
|
|
}
|
|
|
|
static void omap_mcbsp_source_tick(void *opaque)
|
|
{
|
|
struct omap_mcbsp_s *s = (struct omap_mcbsp_s *) opaque;
|
|
static const int bps[8] = { 0, 1, 1, 2, 2, 2, -255, -255 };
|
|
|
|
if (!s->rx_rate)
|
|
return;
|
|
if (s->rx_req)
|
|
printf("%s: Rx FIFO overrun\n", __func__);
|
|
|
|
s->rx_req = s->rx_rate << bps[(s->rcr[0] >> 5) & 7];
|
|
|
|
omap_mcbsp_rx_newdata(s);
|
|
timer_mod(s->source_timer, qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) +
|
|
NANOSECONDS_PER_SECOND);
|
|
}
|
|
|
|
static void omap_mcbsp_rx_start(struct omap_mcbsp_s *s)
|
|
{
|
|
if (!s->codec || !s->codec->rts)
|
|
omap_mcbsp_source_tick(s);
|
|
else if (s->codec->in.len) {
|
|
s->rx_req = s->codec->in.len;
|
|
omap_mcbsp_rx_newdata(s);
|
|
}
|
|
}
|
|
|
|
static void omap_mcbsp_rx_stop(struct omap_mcbsp_s *s)
|
|
{
|
|
timer_del(s->source_timer);
|
|
}
|
|
|
|
static void omap_mcbsp_rx_done(struct omap_mcbsp_s *s)
|
|
{
|
|
s->spcr[0] &= ~(1 << 1); /* RRDY */
|
|
qemu_irq_lower(s->rxdrq);
|
|
omap_mcbsp_intr_update(s);
|
|
}
|
|
|
|
static void omap_mcbsp_tx_newdata(struct omap_mcbsp_s *s)
|
|
{
|
|
s->spcr[1] |= 1 << 1; /* XRDY */
|
|
qemu_irq_raise(s->txdrq);
|
|
omap_mcbsp_intr_update(s);
|
|
}
|
|
|
|
static void omap_mcbsp_sink_tick(void *opaque)
|
|
{
|
|
struct omap_mcbsp_s *s = (struct omap_mcbsp_s *) opaque;
|
|
static const int bps[8] = { 0, 1, 1, 2, 2, 2, -255, -255 };
|
|
|
|
if (!s->tx_rate)
|
|
return;
|
|
if (s->tx_req)
|
|
printf("%s: Tx FIFO underrun\n", __func__);
|
|
|
|
s->tx_req = s->tx_rate << bps[(s->xcr[0] >> 5) & 7];
|
|
|
|
omap_mcbsp_tx_newdata(s);
|
|
timer_mod(s->sink_timer, qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) +
|
|
NANOSECONDS_PER_SECOND);
|
|
}
|
|
|
|
static void omap_mcbsp_tx_start(struct omap_mcbsp_s *s)
|
|
{
|
|
if (!s->codec || !s->codec->cts)
|
|
omap_mcbsp_sink_tick(s);
|
|
else if (s->codec->out.size) {
|
|
s->tx_req = s->codec->out.size;
|
|
omap_mcbsp_tx_newdata(s);
|
|
}
|
|
}
|
|
|
|
static void omap_mcbsp_tx_done(struct omap_mcbsp_s *s)
|
|
{
|
|
s->spcr[1] &= ~(1 << 1); /* XRDY */
|
|
qemu_irq_lower(s->txdrq);
|
|
omap_mcbsp_intr_update(s);
|
|
if (s->codec && s->codec->cts)
|
|
s->codec->tx_swallow(s->codec->opaque);
|
|
}
|
|
|
|
static void omap_mcbsp_tx_stop(struct omap_mcbsp_s *s)
|
|
{
|
|
s->tx_req = 0;
|
|
omap_mcbsp_tx_done(s);
|
|
timer_del(s->sink_timer);
|
|
}
|
|
|
|
static void omap_mcbsp_req_update(struct omap_mcbsp_s *s)
|
|
{
|
|
int prev_rx_rate, prev_tx_rate;
|
|
int rx_rate = 0, tx_rate = 0;
|
|
int cpu_rate = 1500000; /* XXX */
|
|
|
|
/* TODO: check CLKSTP bit */
|
|
if (s->spcr[1] & (1 << 6)) { /* GRST */
|
|
if (s->spcr[0] & (1 << 0)) { /* RRST */
|
|
if ((s->srgr[1] & (1 << 13)) && /* CLKSM */
|
|
(s->pcr & (1 << 8))) { /* CLKRM */
|
|
if (~s->pcr & (1 << 7)) /* SCLKME */
|
|
rx_rate = cpu_rate /
|
|
((s->srgr[0] & 0xff) + 1); /* CLKGDV */
|
|
} else
|
|
if (s->codec)
|
|
rx_rate = s->codec->rx_rate;
|
|
}
|
|
|
|
if (s->spcr[1] & (1 << 0)) { /* XRST */
|
|
if ((s->srgr[1] & (1 << 13)) && /* CLKSM */
|
|
(s->pcr & (1 << 9))) { /* CLKXM */
|
|
if (~s->pcr & (1 << 7)) /* SCLKME */
|
|
tx_rate = cpu_rate /
|
|
((s->srgr[0] & 0xff) + 1); /* CLKGDV */
|
|
} else
|
|
if (s->codec)
|
|
tx_rate = s->codec->tx_rate;
|
|
}
|
|
}
|
|
prev_tx_rate = s->tx_rate;
|
|
prev_rx_rate = s->rx_rate;
|
|
s->tx_rate = tx_rate;
|
|
s->rx_rate = rx_rate;
|
|
|
|
if (s->codec)
|
|
s->codec->set_rate(s->codec->opaque, rx_rate, tx_rate);
|
|
|
|
if (!prev_tx_rate && tx_rate)
|
|
omap_mcbsp_tx_start(s);
|
|
else if (s->tx_rate && !tx_rate)
|
|
omap_mcbsp_tx_stop(s);
|
|
|
|
if (!prev_rx_rate && rx_rate)
|
|
omap_mcbsp_rx_start(s);
|
|
else if (prev_tx_rate && !tx_rate)
|
|
omap_mcbsp_rx_stop(s);
|
|
}
|
|
|
|
static uint64_t omap_mcbsp_read(void *opaque, hwaddr addr,
|
|
unsigned size)
|
|
{
|
|
struct omap_mcbsp_s *s = (struct omap_mcbsp_s *) opaque;
|
|
int offset = addr & OMAP_MPUI_REG_MASK;
|
|
uint16_t ret;
|
|
|
|
if (size != 2) {
|
|
return omap_badwidth_read16(opaque, addr);
|
|
}
|
|
|
|
switch (offset) {
|
|
case 0x00: /* DRR2 */
|
|
if (((s->rcr[0] >> 5) & 7) < 3) /* RWDLEN1 */
|
|
return 0x0000;
|
|
/* Fall through. */
|
|
case 0x02: /* DRR1 */
|
|
if (s->rx_req < 2) {
|
|
printf("%s: Rx FIFO underrun\n", __func__);
|
|
omap_mcbsp_rx_done(s);
|
|
} else {
|
|
s->tx_req -= 2;
|
|
if (s->codec && s->codec->in.len >= 2) {
|
|
ret = s->codec->in.fifo[s->codec->in.start ++] << 8;
|
|
ret |= s->codec->in.fifo[s->codec->in.start ++];
|
|
s->codec->in.len -= 2;
|
|
} else
|
|
ret = 0x0000;
|
|
if (!s->tx_req)
|
|
omap_mcbsp_rx_done(s);
|
|
return ret;
|
|
}
|
|
return 0x0000;
|
|
|
|
case 0x04: /* DXR2 */
|
|
case 0x06: /* DXR1 */
|
|
return 0x0000;
|
|
|
|
case 0x08: /* SPCR2 */
|
|
return s->spcr[1];
|
|
case 0x0a: /* SPCR1 */
|
|
return s->spcr[0];
|
|
case 0x0c: /* RCR2 */
|
|
return s->rcr[1];
|
|
case 0x0e: /* RCR1 */
|
|
return s->rcr[0];
|
|
case 0x10: /* XCR2 */
|
|
return s->xcr[1];
|
|
case 0x12: /* XCR1 */
|
|
return s->xcr[0];
|
|
case 0x14: /* SRGR2 */
|
|
return s->srgr[1];
|
|
case 0x16: /* SRGR1 */
|
|
return s->srgr[0];
|
|
case 0x18: /* MCR2 */
|
|
return s->mcr[1];
|
|
case 0x1a: /* MCR1 */
|
|
return s->mcr[0];
|
|
case 0x1c: /* RCERA */
|
|
return s->rcer[0];
|
|
case 0x1e: /* RCERB */
|
|
return s->rcer[1];
|
|
case 0x20: /* XCERA */
|
|
return s->xcer[0];
|
|
case 0x22: /* XCERB */
|
|
return s->xcer[1];
|
|
case 0x24: /* PCR0 */
|
|
return s->pcr;
|
|
case 0x26: /* RCERC */
|
|
return s->rcer[2];
|
|
case 0x28: /* RCERD */
|
|
return s->rcer[3];
|
|
case 0x2a: /* XCERC */
|
|
return s->xcer[2];
|
|
case 0x2c: /* XCERD */
|
|
return s->xcer[3];
|
|
case 0x2e: /* RCERE */
|
|
return s->rcer[4];
|
|
case 0x30: /* RCERF */
|
|
return s->rcer[5];
|
|
case 0x32: /* XCERE */
|
|
return s->xcer[4];
|
|
case 0x34: /* XCERF */
|
|
return s->xcer[5];
|
|
case 0x36: /* RCERG */
|
|
return s->rcer[6];
|
|
case 0x38: /* RCERH */
|
|
return s->rcer[7];
|
|
case 0x3a: /* XCERG */
|
|
return s->xcer[6];
|
|
case 0x3c: /* XCERH */
|
|
return s->xcer[7];
|
|
}
|
|
|
|
OMAP_BAD_REG(addr);
|
|
return 0;
|
|
}
|
|
|
|
static void omap_mcbsp_writeh(void *opaque, hwaddr addr,
|
|
uint32_t value)
|
|
{
|
|
struct omap_mcbsp_s *s = (struct omap_mcbsp_s *) opaque;
|
|
int offset = addr & OMAP_MPUI_REG_MASK;
|
|
|
|
switch (offset) {
|
|
case 0x00: /* DRR2 */
|
|
case 0x02: /* DRR1 */
|
|
OMAP_RO_REG(addr);
|
|
return;
|
|
|
|
case 0x04: /* DXR2 */
|
|
if (((s->xcr[0] >> 5) & 7) < 3) /* XWDLEN1 */
|
|
return;
|
|
/* Fall through. */
|
|
case 0x06: /* DXR1 */
|
|
if (s->tx_req > 1) {
|
|
s->tx_req -= 2;
|
|
if (s->codec && s->codec->cts) {
|
|
s->codec->out.fifo[s->codec->out.len ++] = (value >> 8) & 0xff;
|
|
s->codec->out.fifo[s->codec->out.len ++] = (value >> 0) & 0xff;
|
|
}
|
|
if (s->tx_req < 2)
|
|
omap_mcbsp_tx_done(s);
|
|
} else
|
|
printf("%s: Tx FIFO overrun\n", __func__);
|
|
return;
|
|
|
|
case 0x08: /* SPCR2 */
|
|
s->spcr[1] &= 0x0002;
|
|
s->spcr[1] |= 0x03f9 & value;
|
|
s->spcr[1] |= 0x0004 & (value << 2); /* XEMPTY := XRST */
|
|
if (~value & 1) /* XRST */
|
|
s->spcr[1] &= ~6;
|
|
omap_mcbsp_req_update(s);
|
|
return;
|
|
case 0x0a: /* SPCR1 */
|
|
s->spcr[0] &= 0x0006;
|
|
s->spcr[0] |= 0xf8f9 & value;
|
|
if (value & (1 << 15)) /* DLB */
|
|
printf("%s: Digital Loopback mode enable attempt\n", __func__);
|
|
if (~value & 1) { /* RRST */
|
|
s->spcr[0] &= ~6;
|
|
s->rx_req = 0;
|
|
omap_mcbsp_rx_done(s);
|
|
}
|
|
omap_mcbsp_req_update(s);
|
|
return;
|
|
|
|
case 0x0c: /* RCR2 */
|
|
s->rcr[1] = value & 0xffff;
|
|
return;
|
|
case 0x0e: /* RCR1 */
|
|
s->rcr[0] = value & 0x7fe0;
|
|
return;
|
|
case 0x10: /* XCR2 */
|
|
s->xcr[1] = value & 0xffff;
|
|
return;
|
|
case 0x12: /* XCR1 */
|
|
s->xcr[0] = value & 0x7fe0;
|
|
return;
|
|
case 0x14: /* SRGR2 */
|
|
s->srgr[1] = value & 0xffff;
|
|
omap_mcbsp_req_update(s);
|
|
return;
|
|
case 0x16: /* SRGR1 */
|
|
s->srgr[0] = value & 0xffff;
|
|
omap_mcbsp_req_update(s);
|
|
return;
|
|
case 0x18: /* MCR2 */
|
|
s->mcr[1] = value & 0x03e3;
|
|
if (value & 3) /* XMCM */
|
|
printf("%s: Tx channel selection mode enable attempt\n", __func__);
|
|
return;
|
|
case 0x1a: /* MCR1 */
|
|
s->mcr[0] = value & 0x03e1;
|
|
if (value & 1) /* RMCM */
|
|
printf("%s: Rx channel selection mode enable attempt\n", __func__);
|
|
return;
|
|
case 0x1c: /* RCERA */
|
|
s->rcer[0] = value & 0xffff;
|
|
return;
|
|
case 0x1e: /* RCERB */
|
|
s->rcer[1] = value & 0xffff;
|
|
return;
|
|
case 0x20: /* XCERA */
|
|
s->xcer[0] = value & 0xffff;
|
|
return;
|
|
case 0x22: /* XCERB */
|
|
s->xcer[1] = value & 0xffff;
|
|
return;
|
|
case 0x24: /* PCR0 */
|
|
s->pcr = value & 0x7faf;
|
|
return;
|
|
case 0x26: /* RCERC */
|
|
s->rcer[2] = value & 0xffff;
|
|
return;
|
|
case 0x28: /* RCERD */
|
|
s->rcer[3] = value & 0xffff;
|
|
return;
|
|
case 0x2a: /* XCERC */
|
|
s->xcer[2] = value & 0xffff;
|
|
return;
|
|
case 0x2c: /* XCERD */
|
|
s->xcer[3] = value & 0xffff;
|
|
return;
|
|
case 0x2e: /* RCERE */
|
|
s->rcer[4] = value & 0xffff;
|
|
return;
|
|
case 0x30: /* RCERF */
|
|
s->rcer[5] = value & 0xffff;
|
|
return;
|
|
case 0x32: /* XCERE */
|
|
s->xcer[4] = value & 0xffff;
|
|
return;
|
|
case 0x34: /* XCERF */
|
|
s->xcer[5] = value & 0xffff;
|
|
return;
|
|
case 0x36: /* RCERG */
|
|
s->rcer[6] = value & 0xffff;
|
|
return;
|
|
case 0x38: /* RCERH */
|
|
s->rcer[7] = value & 0xffff;
|
|
return;
|
|
case 0x3a: /* XCERG */
|
|
s->xcer[6] = value & 0xffff;
|
|
return;
|
|
case 0x3c: /* XCERH */
|
|
s->xcer[7] = value & 0xffff;
|
|
return;
|
|
}
|
|
|
|
OMAP_BAD_REG(addr);
|
|
}
|
|
|
|
static void omap_mcbsp_writew(void *opaque, hwaddr addr,
|
|
uint32_t value)
|
|
{
|
|
struct omap_mcbsp_s *s = (struct omap_mcbsp_s *) opaque;
|
|
int offset = addr & OMAP_MPUI_REG_MASK;
|
|
|
|
if (offset == 0x04) { /* DXR */
|
|
if (((s->xcr[0] >> 5) & 7) < 3) /* XWDLEN1 */
|
|
return;
|
|
if (s->tx_req > 3) {
|
|
s->tx_req -= 4;
|
|
if (s->codec && s->codec->cts) {
|
|
s->codec->out.fifo[s->codec->out.len ++] =
|
|
(value >> 24) & 0xff;
|
|
s->codec->out.fifo[s->codec->out.len ++] =
|
|
(value >> 16) & 0xff;
|
|
s->codec->out.fifo[s->codec->out.len ++] =
|
|
(value >> 8) & 0xff;
|
|
s->codec->out.fifo[s->codec->out.len ++] =
|
|
(value >> 0) & 0xff;
|
|
}
|
|
if (s->tx_req < 4)
|
|
omap_mcbsp_tx_done(s);
|
|
} else
|
|
printf("%s: Tx FIFO overrun\n", __func__);
|
|
return;
|
|
}
|
|
|
|
omap_badwidth_write16(opaque, addr, value);
|
|
}
|
|
|
|
static void omap_mcbsp_write(void *opaque, hwaddr addr,
|
|
uint64_t value, unsigned size)
|
|
{
|
|
switch (size) {
|
|
case 2:
|
|
omap_mcbsp_writeh(opaque, addr, value);
|
|
break;
|
|
case 4:
|
|
omap_mcbsp_writew(opaque, addr, value);
|
|
break;
|
|
default:
|
|
omap_badwidth_write16(opaque, addr, value);
|
|
}
|
|
}
|
|
|
|
static const MemoryRegionOps omap_mcbsp_ops = {
|
|
.read = omap_mcbsp_read,
|
|
.write = omap_mcbsp_write,
|
|
.endianness = DEVICE_NATIVE_ENDIAN,
|
|
};
|
|
|
|
static void omap_mcbsp_reset(struct omap_mcbsp_s *s)
|
|
{
|
|
memset(&s->spcr, 0, sizeof(s->spcr));
|
|
memset(&s->rcr, 0, sizeof(s->rcr));
|
|
memset(&s->xcr, 0, sizeof(s->xcr));
|
|
s->srgr[0] = 0x0001;
|
|
s->srgr[1] = 0x2000;
|
|
memset(&s->mcr, 0, sizeof(s->mcr));
|
|
memset(&s->pcr, 0, sizeof(s->pcr));
|
|
memset(&s->rcer, 0, sizeof(s->rcer));
|
|
memset(&s->xcer, 0, sizeof(s->xcer));
|
|
s->tx_req = 0;
|
|
s->rx_req = 0;
|
|
s->tx_rate = 0;
|
|
s->rx_rate = 0;
|
|
timer_del(s->source_timer);
|
|
timer_del(s->sink_timer);
|
|
}
|
|
|
|
static struct omap_mcbsp_s *omap_mcbsp_init(MemoryRegion *system_memory,
|
|
hwaddr base,
|
|
qemu_irq txirq, qemu_irq rxirq,
|
|
qemu_irq *dma, omap_clk clk)
|
|
{
|
|
struct omap_mcbsp_s *s = g_new0(struct omap_mcbsp_s, 1);
|
|
|
|
s->txirq = txirq;
|
|
s->rxirq = rxirq;
|
|
s->txdrq = dma[0];
|
|
s->rxdrq = dma[1];
|
|
s->sink_timer = timer_new_ns(QEMU_CLOCK_VIRTUAL, omap_mcbsp_sink_tick, s);
|
|
s->source_timer = timer_new_ns(QEMU_CLOCK_VIRTUAL, omap_mcbsp_source_tick, s);
|
|
omap_mcbsp_reset(s);
|
|
|
|
memory_region_init_io(&s->iomem, NULL, &omap_mcbsp_ops, s, "omap-mcbsp", 0x800);
|
|
memory_region_add_subregion(system_memory, base, &s->iomem);
|
|
|
|
return s;
|
|
}
|
|
|
|
static void omap_mcbsp_i2s_swallow(void *opaque, int line, int level)
|
|
{
|
|
struct omap_mcbsp_s *s = (struct omap_mcbsp_s *) opaque;
|
|
|
|
if (s->rx_rate) {
|
|
s->rx_req = s->codec->in.len;
|
|
omap_mcbsp_rx_newdata(s);
|
|
}
|
|
}
|
|
|
|
static void omap_mcbsp_i2s_start(void *opaque, int line, int level)
|
|
{
|
|
struct omap_mcbsp_s *s = (struct omap_mcbsp_s *) opaque;
|
|
|
|
if (s->tx_rate) {
|
|
s->tx_req = s->codec->out.size;
|
|
omap_mcbsp_tx_newdata(s);
|
|
}
|
|
}
|
|
|
|
void omap_mcbsp_i2s_attach(struct omap_mcbsp_s *s, I2SCodec *slave)
|
|
{
|
|
s->codec = slave;
|
|
slave->rx_swallow = qemu_allocate_irq(omap_mcbsp_i2s_swallow, s, 0);
|
|
slave->tx_start = qemu_allocate_irq(omap_mcbsp_i2s_start, s, 0);
|
|
}
|
|
|
|
/* LED Pulse Generators */
|
|
struct omap_lpg_s {
|
|
MemoryRegion iomem;
|
|
QEMUTimer *tm;
|
|
|
|
uint8_t control;
|
|
uint8_t power;
|
|
int64_t on;
|
|
int64_t period;
|
|
int clk;
|
|
int cycle;
|
|
};
|
|
|
|
static void omap_lpg_tick(void *opaque)
|
|
{
|
|
struct omap_lpg_s *s = opaque;
|
|
|
|
if (s->cycle)
|
|
timer_mod(s->tm, qemu_clock_get_ms(QEMU_CLOCK_VIRTUAL) + s->period - s->on);
|
|
else
|
|
timer_mod(s->tm, qemu_clock_get_ms(QEMU_CLOCK_VIRTUAL) + s->on);
|
|
|
|
s->cycle = !s->cycle;
|
|
printf("%s: LED is %s\n", __func__, s->cycle ? "on" : "off");
|
|
}
|
|
|
|
static void omap_lpg_update(struct omap_lpg_s *s)
|
|
{
|
|
int64_t on, period = 1, ticks = 1000;
|
|
static const int per[8] = { 1, 2, 4, 8, 12, 16, 20, 24 };
|
|
|
|
if (~s->control & (1 << 6)) /* LPGRES */
|
|
on = 0;
|
|
else if (s->control & (1 << 7)) /* PERM_ON */
|
|
on = period;
|
|
else {
|
|
period = muldiv64(ticks, per[s->control & 7], /* PERCTRL */
|
|
256 / 32);
|
|
on = (s->clk && s->power) ? muldiv64(ticks,
|
|
per[(s->control >> 3) & 7], 256) : 0; /* ONCTRL */
|
|
}
|
|
|
|
timer_del(s->tm);
|
|
if (on == period && s->on < s->period)
|
|
printf("%s: LED is on\n", __func__);
|
|
else if (on == 0 && s->on)
|
|
printf("%s: LED is off\n", __func__);
|
|
else if (on && (on != s->on || period != s->period)) {
|
|
s->cycle = 0;
|
|
s->on = on;
|
|
s->period = period;
|
|
omap_lpg_tick(s);
|
|
return;
|
|
}
|
|
|
|
s->on = on;
|
|
s->period = period;
|
|
}
|
|
|
|
static void omap_lpg_reset(struct omap_lpg_s *s)
|
|
{
|
|
s->control = 0x00;
|
|
s->power = 0x00;
|
|
s->clk = 1;
|
|
omap_lpg_update(s);
|
|
}
|
|
|
|
static uint64_t omap_lpg_read(void *opaque, hwaddr addr,
|
|
unsigned size)
|
|
{
|
|
struct omap_lpg_s *s = (struct omap_lpg_s *) opaque;
|
|
int offset = addr & OMAP_MPUI_REG_MASK;
|
|
|
|
if (size != 1) {
|
|
return omap_badwidth_read8(opaque, addr);
|
|
}
|
|
|
|
switch (offset) {
|
|
case 0x00: /* LCR */
|
|
return s->control;
|
|
|
|
case 0x04: /* PMR */
|
|
return s->power;
|
|
}
|
|
|
|
OMAP_BAD_REG(addr);
|
|
return 0;
|
|
}
|
|
|
|
static void omap_lpg_write(void *opaque, hwaddr addr,
|
|
uint64_t value, unsigned size)
|
|
{
|
|
struct omap_lpg_s *s = (struct omap_lpg_s *) opaque;
|
|
int offset = addr & OMAP_MPUI_REG_MASK;
|
|
|
|
if (size != 1) {
|
|
omap_badwidth_write8(opaque, addr, value);
|
|
return;
|
|
}
|
|
|
|
switch (offset) {
|
|
case 0x00: /* LCR */
|
|
if (~value & (1 << 6)) /* LPGRES */
|
|
omap_lpg_reset(s);
|
|
s->control = value & 0xff;
|
|
omap_lpg_update(s);
|
|
return;
|
|
|
|
case 0x04: /* PMR */
|
|
s->power = value & 0x01;
|
|
omap_lpg_update(s);
|
|
return;
|
|
|
|
default:
|
|
OMAP_BAD_REG(addr);
|
|
return;
|
|
}
|
|
}
|
|
|
|
static const MemoryRegionOps omap_lpg_ops = {
|
|
.read = omap_lpg_read,
|
|
.write = omap_lpg_write,
|
|
.endianness = DEVICE_NATIVE_ENDIAN,
|
|
};
|
|
|
|
static void omap_lpg_clk_update(void *opaque, int line, int on)
|
|
{
|
|
struct omap_lpg_s *s = (struct omap_lpg_s *) opaque;
|
|
|
|
s->clk = on;
|
|
omap_lpg_update(s);
|
|
}
|
|
|
|
static struct omap_lpg_s *omap_lpg_init(MemoryRegion *system_memory,
|
|
hwaddr base, omap_clk clk)
|
|
{
|
|
struct omap_lpg_s *s = g_new0(struct omap_lpg_s, 1);
|
|
|
|
s->tm = timer_new_ms(QEMU_CLOCK_VIRTUAL, omap_lpg_tick, s);
|
|
|
|
omap_lpg_reset(s);
|
|
|
|
memory_region_init_io(&s->iomem, NULL, &omap_lpg_ops, s, "omap-lpg", 0x800);
|
|
memory_region_add_subregion(system_memory, base, &s->iomem);
|
|
|
|
omap_clk_adduser(clk, qemu_allocate_irq(omap_lpg_clk_update, s, 0));
|
|
|
|
return s;
|
|
}
|
|
|
|
/* MPUI Peripheral Bridge configuration */
|
|
static uint64_t omap_mpui_io_read(void *opaque, hwaddr addr,
|
|
unsigned size)
|
|
{
|
|
if (size != 2) {
|
|
return omap_badwidth_read16(opaque, addr);
|
|
}
|
|
|
|
if (addr == OMAP_MPUI_BASE) /* CMR */
|
|
return 0xfe4d;
|
|
|
|
OMAP_BAD_REG(addr);
|
|
return 0;
|
|
}
|
|
|
|
static void omap_mpui_io_write(void *opaque, hwaddr addr,
|
|
uint64_t value, unsigned size)
|
|
{
|
|
/* FIXME: infinite loop */
|
|
omap_badwidth_write16(opaque, addr, value);
|
|
}
|
|
|
|
static const MemoryRegionOps omap_mpui_io_ops = {
|
|
.read = omap_mpui_io_read,
|
|
.write = omap_mpui_io_write,
|
|
.endianness = DEVICE_NATIVE_ENDIAN,
|
|
};
|
|
|
|
static void omap_setup_mpui_io(MemoryRegion *system_memory,
|
|
struct omap_mpu_state_s *mpu)
|
|
{
|
|
memory_region_init_io(&mpu->mpui_io_iomem, NULL, &omap_mpui_io_ops, mpu,
|
|
"omap-mpui-io", 0x7fff);
|
|
memory_region_add_subregion(system_memory, OMAP_MPUI_BASE,
|
|
&mpu->mpui_io_iomem);
|
|
}
|
|
|
|
/* General chip reset */
|
|
static void omap1_mpu_reset(void *opaque)
|
|
{
|
|
struct omap_mpu_state_s *mpu = (struct omap_mpu_state_s *) opaque;
|
|
|
|
omap_dma_reset(mpu->dma);
|
|
omap_mpu_timer_reset(mpu->timer[0]);
|
|
omap_mpu_timer_reset(mpu->timer[1]);
|
|
omap_mpu_timer_reset(mpu->timer[2]);
|
|
omap_wd_timer_reset(mpu->wdt);
|
|
omap_os_timer_reset(mpu->os_timer);
|
|
omap_lcdc_reset(mpu->lcd);
|
|
omap_ulpd_pm_reset(mpu);
|
|
omap_pin_cfg_reset(mpu);
|
|
omap_mpui_reset(mpu);
|
|
omap_tipb_bridge_reset(mpu->private_tipb);
|
|
omap_tipb_bridge_reset(mpu->public_tipb);
|
|
omap_dpll_reset(mpu->dpll[0]);
|
|
omap_dpll_reset(mpu->dpll[1]);
|
|
omap_dpll_reset(mpu->dpll[2]);
|
|
omap_uart_reset(mpu->uart[0]);
|
|
omap_uart_reset(mpu->uart[1]);
|
|
omap_uart_reset(mpu->uart[2]);
|
|
omap_mmc_reset(mpu->mmc);
|
|
omap_mpuio_reset(mpu->mpuio);
|
|
omap_uwire_reset(mpu->microwire);
|
|
omap_pwl_reset(mpu->pwl);
|
|
omap_pwt_reset(mpu->pwt);
|
|
omap_rtc_reset(mpu->rtc);
|
|
omap_mcbsp_reset(mpu->mcbsp1);
|
|
omap_mcbsp_reset(mpu->mcbsp2);
|
|
omap_mcbsp_reset(mpu->mcbsp3);
|
|
omap_lpg_reset(mpu->led[0]);
|
|
omap_lpg_reset(mpu->led[1]);
|
|
omap_clkm_reset(mpu);
|
|
cpu_reset(CPU(mpu->cpu));
|
|
}
|
|
|
|
static const struct omap_map_s {
|
|
hwaddr phys_dsp;
|
|
hwaddr phys_mpu;
|
|
uint32_t size;
|
|
const char *name;
|
|
} omap15xx_dsp_mm[] = {
|
|
/* Strobe 0 */
|
|
{ 0xe1010000, 0xfffb0000, 0x800, "UART1 BT" }, /* CS0 */
|
|
{ 0xe1010800, 0xfffb0800, 0x800, "UART2 COM" }, /* CS1 */
|
|
{ 0xe1011800, 0xfffb1800, 0x800, "McBSP1 audio" }, /* CS3 */
|
|
{ 0xe1012000, 0xfffb2000, 0x800, "MCSI2 communication" }, /* CS4 */
|
|
{ 0xe1012800, 0xfffb2800, 0x800, "MCSI1 BT u-Law" }, /* CS5 */
|
|
{ 0xe1013000, 0xfffb3000, 0x800, "uWire" }, /* CS6 */
|
|
{ 0xe1013800, 0xfffb3800, 0x800, "I^2C" }, /* CS7 */
|
|
{ 0xe1014000, 0xfffb4000, 0x800, "USB W2FC" }, /* CS8 */
|
|
{ 0xe1014800, 0xfffb4800, 0x800, "RTC" }, /* CS9 */
|
|
{ 0xe1015000, 0xfffb5000, 0x800, "MPUIO" }, /* CS10 */
|
|
{ 0xe1015800, 0xfffb5800, 0x800, "PWL" }, /* CS11 */
|
|
{ 0xe1016000, 0xfffb6000, 0x800, "PWT" }, /* CS12 */
|
|
{ 0xe1017000, 0xfffb7000, 0x800, "McBSP3" }, /* CS14 */
|
|
{ 0xe1017800, 0xfffb7800, 0x800, "MMC" }, /* CS15 */
|
|
{ 0xe1019000, 0xfffb9000, 0x800, "32-kHz timer" }, /* CS18 */
|
|
{ 0xe1019800, 0xfffb9800, 0x800, "UART3" }, /* CS19 */
|
|
{ 0xe101c800, 0xfffbc800, 0x800, "TIPB switches" }, /* CS25 */
|
|
/* Strobe 1 */
|
|
{ 0xe101e000, 0xfffce000, 0x800, "GPIOs" }, /* CS28 */
|
|
|
|
{ 0 }
|
|
};
|
|
|
|
static void omap_setup_dsp_mapping(MemoryRegion *system_memory,
|
|
const struct omap_map_s *map)
|
|
{
|
|
MemoryRegion *io;
|
|
|
|
for (; map->phys_dsp; map ++) {
|
|
io = g_new(MemoryRegion, 1);
|
|
memory_region_init_alias(io, NULL, map->name,
|
|
system_memory, map->phys_mpu, map->size);
|
|
memory_region_add_subregion(system_memory, map->phys_dsp, io);
|
|
}
|
|
}
|
|
|
|
void omap_mpu_wakeup(void *opaque, int irq, int req)
|
|
{
|
|
struct omap_mpu_state_s *mpu = (struct omap_mpu_state_s *) opaque;
|
|
CPUState *cpu = CPU(mpu->cpu);
|
|
|
|
if (cpu->halted) {
|
|
cpu_interrupt(cpu, CPU_INTERRUPT_EXITTB);
|
|
}
|
|
}
|
|
|
|
static const struct dma_irq_map omap1_dma_irq_map[] = {
|
|
{ 0, OMAP_INT_DMA_CH0_6 },
|
|
{ 0, OMAP_INT_DMA_CH1_7 },
|
|
{ 0, OMAP_INT_DMA_CH2_8 },
|
|
{ 0, OMAP_INT_DMA_CH3 },
|
|
{ 0, OMAP_INT_DMA_CH4 },
|
|
{ 0, OMAP_INT_DMA_CH5 },
|
|
{ 1, OMAP_INT_1610_DMA_CH6 },
|
|
{ 1, OMAP_INT_1610_DMA_CH7 },
|
|
{ 1, OMAP_INT_1610_DMA_CH8 },
|
|
{ 1, OMAP_INT_1610_DMA_CH9 },
|
|
{ 1, OMAP_INT_1610_DMA_CH10 },
|
|
{ 1, OMAP_INT_1610_DMA_CH11 },
|
|
{ 1, OMAP_INT_1610_DMA_CH12 },
|
|
{ 1, OMAP_INT_1610_DMA_CH13 },
|
|
{ 1, OMAP_INT_1610_DMA_CH14 },
|
|
{ 1, OMAP_INT_1610_DMA_CH15 }
|
|
};
|
|
|
|
/* DMA ports for OMAP1 */
|
|
static int omap_validate_emiff_addr(struct omap_mpu_state_s *s,
|
|
hwaddr addr)
|
|
{
|
|
return range_covers_byte(OMAP_EMIFF_BASE, s->sdram_size, addr);
|
|
}
|
|
|
|
static int omap_validate_emifs_addr(struct omap_mpu_state_s *s,
|
|
hwaddr addr)
|
|
{
|
|
return range_covers_byte(OMAP_EMIFS_BASE, OMAP_EMIFF_BASE - OMAP_EMIFS_BASE,
|
|
addr);
|
|
}
|
|
|
|
static int omap_validate_imif_addr(struct omap_mpu_state_s *s,
|
|
hwaddr addr)
|
|
{
|
|
return range_covers_byte(OMAP_IMIF_BASE, s->sram_size, addr);
|
|
}
|
|
|
|
static int omap_validate_tipb_addr(struct omap_mpu_state_s *s,
|
|
hwaddr addr)
|
|
{
|
|
return range_covers_byte(0xfffb0000, 0xffff0000 - 0xfffb0000, addr);
|
|
}
|
|
|
|
static int omap_validate_local_addr(struct omap_mpu_state_s *s,
|
|
hwaddr addr)
|
|
{
|
|
return range_covers_byte(OMAP_LOCALBUS_BASE, 0x1000000, addr);
|
|
}
|
|
|
|
static int omap_validate_tipb_mpui_addr(struct omap_mpu_state_s *s,
|
|
hwaddr addr)
|
|
{
|
|
return range_covers_byte(0xe1010000, 0xe1020004 - 0xe1010000, addr);
|
|
}
|
|
|
|
struct omap_mpu_state_s *omap310_mpu_init(MemoryRegion *system_memory,
|
|
unsigned long sdram_size,
|
|
const char *cpu_type)
|
|
{
|
|
int i;
|
|
struct omap_mpu_state_s *s = g_new0(struct omap_mpu_state_s, 1);
|
|
qemu_irq dma_irqs[6];
|
|
DriveInfo *dinfo;
|
|
SysBusDevice *busdev;
|
|
|
|
/* Core */
|
|
s->mpu_model = omap310;
|
|
s->cpu = ARM_CPU(cpu_create(cpu_type));
|
|
s->sdram_size = sdram_size;
|
|
s->sram_size = OMAP15XX_SRAM_SIZE;
|
|
|
|
s->wakeup = qemu_allocate_irq(omap_mpu_wakeup, s, 0);
|
|
|
|
/* Clocks */
|
|
omap_clk_init(s);
|
|
|
|
/* Memory-mapped stuff */
|
|
memory_region_allocate_system_memory(&s->emiff_ram, NULL, "omap1.dram",
|
|
s->sdram_size);
|
|
memory_region_add_subregion(system_memory, OMAP_EMIFF_BASE, &s->emiff_ram);
|
|
memory_region_init_ram(&s->imif_ram, NULL, "omap1.sram", s->sram_size,
|
|
&error_fatal);
|
|
memory_region_add_subregion(system_memory, OMAP_IMIF_BASE, &s->imif_ram);
|
|
|
|
omap_clkm_init(system_memory, 0xfffece00, 0xe1008000, s);
|
|
|
|
s->ih[0] = qdev_create(NULL, "omap-intc");
|
|
qdev_prop_set_uint32(s->ih[0], "size", 0x100);
|
|
qdev_prop_set_ptr(s->ih[0], "clk", omap_findclk(s, "arminth_ck"));
|
|
qdev_init_nofail(s->ih[0]);
|
|
busdev = SYS_BUS_DEVICE(s->ih[0]);
|
|
sysbus_connect_irq(busdev, 0,
|
|
qdev_get_gpio_in(DEVICE(s->cpu), ARM_CPU_IRQ));
|
|
sysbus_connect_irq(busdev, 1,
|
|
qdev_get_gpio_in(DEVICE(s->cpu), ARM_CPU_FIQ));
|
|
sysbus_mmio_map(busdev, 0, 0xfffecb00);
|
|
s->ih[1] = qdev_create(NULL, "omap-intc");
|
|
qdev_prop_set_uint32(s->ih[1], "size", 0x800);
|
|
qdev_prop_set_ptr(s->ih[1], "clk", omap_findclk(s, "arminth_ck"));
|
|
qdev_init_nofail(s->ih[1]);
|
|
busdev = SYS_BUS_DEVICE(s->ih[1]);
|
|
sysbus_connect_irq(busdev, 0,
|
|
qdev_get_gpio_in(s->ih[0], OMAP_INT_15XX_IH2_IRQ));
|
|
/* The second interrupt controller's FIQ output is not wired up */
|
|
sysbus_mmio_map(busdev, 0, 0xfffe0000);
|
|
|
|
for (i = 0; i < 6; i++) {
|
|
dma_irqs[i] = qdev_get_gpio_in(s->ih[omap1_dma_irq_map[i].ih],
|
|
omap1_dma_irq_map[i].intr);
|
|
}
|
|
s->dma = omap_dma_init(0xfffed800, dma_irqs, system_memory,
|
|
qdev_get_gpio_in(s->ih[0], OMAP_INT_DMA_LCD),
|
|
s, omap_findclk(s, "dma_ck"), omap_dma_3_1);
|
|
|
|
s->port[emiff ].addr_valid = omap_validate_emiff_addr;
|
|
s->port[emifs ].addr_valid = omap_validate_emifs_addr;
|
|
s->port[imif ].addr_valid = omap_validate_imif_addr;
|
|
s->port[tipb ].addr_valid = omap_validate_tipb_addr;
|
|
s->port[local ].addr_valid = omap_validate_local_addr;
|
|
s->port[tipb_mpui].addr_valid = omap_validate_tipb_mpui_addr;
|
|
|
|
/* Register SDRAM and SRAM DMA ports for fast transfers. */
|
|
soc_dma_port_add_mem(s->dma, memory_region_get_ram_ptr(&s->emiff_ram),
|
|
OMAP_EMIFF_BASE, s->sdram_size);
|
|
soc_dma_port_add_mem(s->dma, memory_region_get_ram_ptr(&s->imif_ram),
|
|
OMAP_IMIF_BASE, s->sram_size);
|
|
|
|
s->timer[0] = omap_mpu_timer_init(system_memory, 0xfffec500,
|
|
qdev_get_gpio_in(s->ih[0], OMAP_INT_TIMER1),
|
|
omap_findclk(s, "mputim_ck"));
|
|
s->timer[1] = omap_mpu_timer_init(system_memory, 0xfffec600,
|
|
qdev_get_gpio_in(s->ih[0], OMAP_INT_TIMER2),
|
|
omap_findclk(s, "mputim_ck"));
|
|
s->timer[2] = omap_mpu_timer_init(system_memory, 0xfffec700,
|
|
qdev_get_gpio_in(s->ih[0], OMAP_INT_TIMER3),
|
|
omap_findclk(s, "mputim_ck"));
|
|
|
|
s->wdt = omap_wd_timer_init(system_memory, 0xfffec800,
|
|
qdev_get_gpio_in(s->ih[0], OMAP_INT_WD_TIMER),
|
|
omap_findclk(s, "armwdt_ck"));
|
|
|
|
s->os_timer = omap_os_timer_init(system_memory, 0xfffb9000,
|
|
qdev_get_gpio_in(s->ih[1], OMAP_INT_OS_TIMER),
|
|
omap_findclk(s, "clk32-kHz"));
|
|
|
|
s->lcd = omap_lcdc_init(system_memory, 0xfffec000,
|
|
qdev_get_gpio_in(s->ih[0], OMAP_INT_LCD_CTRL),
|
|
omap_dma_get_lcdch(s->dma),
|
|
omap_findclk(s, "lcd_ck"));
|
|
|
|
omap_ulpd_pm_init(system_memory, 0xfffe0800, s);
|
|
omap_pin_cfg_init(system_memory, 0xfffe1000, s);
|
|
omap_id_init(system_memory, s);
|
|
|
|
omap_mpui_init(system_memory, 0xfffec900, s);
|
|
|
|
s->private_tipb = omap_tipb_bridge_init(system_memory, 0xfffeca00,
|
|
qdev_get_gpio_in(s->ih[0], OMAP_INT_BRIDGE_PRIV),
|
|
omap_findclk(s, "tipb_ck"));
|
|
s->public_tipb = omap_tipb_bridge_init(system_memory, 0xfffed300,
|
|
qdev_get_gpio_in(s->ih[0], OMAP_INT_BRIDGE_PUB),
|
|
omap_findclk(s, "tipb_ck"));
|
|
|
|
omap_tcmi_init(system_memory, 0xfffecc00, s);
|
|
|
|
s->uart[0] = omap_uart_init(0xfffb0000,
|
|
qdev_get_gpio_in(s->ih[1], OMAP_INT_UART1),
|
|
omap_findclk(s, "uart1_ck"),
|
|
omap_findclk(s, "uart1_ck"),
|
|
s->drq[OMAP_DMA_UART1_TX], s->drq[OMAP_DMA_UART1_RX],
|
|
"uart1",
|
|
serial_hd(0));
|
|
s->uart[1] = omap_uart_init(0xfffb0800,
|
|
qdev_get_gpio_in(s->ih[1], OMAP_INT_UART2),
|
|
omap_findclk(s, "uart2_ck"),
|
|
omap_findclk(s, "uart2_ck"),
|
|
s->drq[OMAP_DMA_UART2_TX], s->drq[OMAP_DMA_UART2_RX],
|
|
"uart2",
|
|
serial_hd(0) ? serial_hd(1) : NULL);
|
|
s->uart[2] = omap_uart_init(0xfffb9800,
|
|
qdev_get_gpio_in(s->ih[0], OMAP_INT_UART3),
|
|
omap_findclk(s, "uart3_ck"),
|
|
omap_findclk(s, "uart3_ck"),
|
|
s->drq[OMAP_DMA_UART3_TX], s->drq[OMAP_DMA_UART3_RX],
|
|
"uart3",
|
|
serial_hd(0) && serial_hd(1) ? serial_hd(2) : NULL);
|
|
|
|
s->dpll[0] = omap_dpll_init(system_memory, 0xfffecf00,
|
|
omap_findclk(s, "dpll1"));
|
|
s->dpll[1] = omap_dpll_init(system_memory, 0xfffed000,
|
|
omap_findclk(s, "dpll2"));
|
|
s->dpll[2] = omap_dpll_init(system_memory, 0xfffed100,
|
|
omap_findclk(s, "dpll3"));
|
|
|
|
dinfo = drive_get(IF_SD, 0, 0);
|
|
if (!dinfo && !qtest_enabled()) {
|
|
warn_report("missing SecureDigital device");
|
|
}
|
|
s->mmc = omap_mmc_init(0xfffb7800, system_memory,
|
|
dinfo ? blk_by_legacy_dinfo(dinfo) : NULL,
|
|
qdev_get_gpio_in(s->ih[1], OMAP_INT_OQN),
|
|
&s->drq[OMAP_DMA_MMC_TX],
|
|
omap_findclk(s, "mmc_ck"));
|
|
|
|
s->mpuio = omap_mpuio_init(system_memory, 0xfffb5000,
|
|
qdev_get_gpio_in(s->ih[1], OMAP_INT_KEYBOARD),
|
|
qdev_get_gpio_in(s->ih[1], OMAP_INT_MPUIO),
|
|
s->wakeup, omap_findclk(s, "clk32-kHz"));
|
|
|
|
s->gpio = qdev_create(NULL, "omap-gpio");
|
|
qdev_prop_set_int32(s->gpio, "mpu_model", s->mpu_model);
|
|
qdev_prop_set_ptr(s->gpio, "clk", omap_findclk(s, "arm_gpio_ck"));
|
|
qdev_init_nofail(s->gpio);
|
|
sysbus_connect_irq(SYS_BUS_DEVICE(s->gpio), 0,
|
|
qdev_get_gpio_in(s->ih[0], OMAP_INT_GPIO_BANK1));
|
|
sysbus_mmio_map(SYS_BUS_DEVICE(s->gpio), 0, 0xfffce000);
|
|
|
|
s->microwire = omap_uwire_init(system_memory, 0xfffb3000,
|
|
qdev_get_gpio_in(s->ih[1], OMAP_INT_uWireTX),
|
|
qdev_get_gpio_in(s->ih[1], OMAP_INT_uWireRX),
|
|
s->drq[OMAP_DMA_UWIRE_TX], omap_findclk(s, "mpuper_ck"));
|
|
|
|
s->pwl = omap_pwl_init(system_memory, 0xfffb5800,
|
|
omap_findclk(s, "armxor_ck"));
|
|
s->pwt = omap_pwt_init(system_memory, 0xfffb6000,
|
|
omap_findclk(s, "armxor_ck"));
|
|
|
|
s->i2c[0] = qdev_create(NULL, "omap_i2c");
|
|
qdev_prop_set_uint8(s->i2c[0], "revision", 0x11);
|
|
qdev_prop_set_ptr(s->i2c[0], "fclk", omap_findclk(s, "mpuper_ck"));
|
|
qdev_init_nofail(s->i2c[0]);
|
|
busdev = SYS_BUS_DEVICE(s->i2c[0]);
|
|
sysbus_connect_irq(busdev, 0, qdev_get_gpio_in(s->ih[1], OMAP_INT_I2C));
|
|
sysbus_connect_irq(busdev, 1, s->drq[OMAP_DMA_I2C_TX]);
|
|
sysbus_connect_irq(busdev, 2, s->drq[OMAP_DMA_I2C_RX]);
|
|
sysbus_mmio_map(busdev, 0, 0xfffb3800);
|
|
|
|
s->rtc = omap_rtc_init(system_memory, 0xfffb4800,
|
|
qdev_get_gpio_in(s->ih[1], OMAP_INT_RTC_TIMER),
|
|
qdev_get_gpio_in(s->ih[1], OMAP_INT_RTC_ALARM),
|
|
omap_findclk(s, "clk32-kHz"));
|
|
|
|
s->mcbsp1 = omap_mcbsp_init(system_memory, 0xfffb1800,
|
|
qdev_get_gpio_in(s->ih[1], OMAP_INT_McBSP1TX),
|
|
qdev_get_gpio_in(s->ih[1], OMAP_INT_McBSP1RX),
|
|
&s->drq[OMAP_DMA_MCBSP1_TX], omap_findclk(s, "dspxor_ck"));
|
|
s->mcbsp2 = omap_mcbsp_init(system_memory, 0xfffb1000,
|
|
qdev_get_gpio_in(s->ih[0],
|
|
OMAP_INT_310_McBSP2_TX),
|
|
qdev_get_gpio_in(s->ih[0],
|
|
OMAP_INT_310_McBSP2_RX),
|
|
&s->drq[OMAP_DMA_MCBSP2_TX], omap_findclk(s, "mpuper_ck"));
|
|
s->mcbsp3 = omap_mcbsp_init(system_memory, 0xfffb7000,
|
|
qdev_get_gpio_in(s->ih[1], OMAP_INT_McBSP3TX),
|
|
qdev_get_gpio_in(s->ih[1], OMAP_INT_McBSP3RX),
|
|
&s->drq[OMAP_DMA_MCBSP3_TX], omap_findclk(s, "dspxor_ck"));
|
|
|
|
s->led[0] = omap_lpg_init(system_memory,
|
|
0xfffbd000, omap_findclk(s, "clk32-kHz"));
|
|
s->led[1] = omap_lpg_init(system_memory,
|
|
0xfffbd800, omap_findclk(s, "clk32-kHz"));
|
|
|
|
/* Register mappings not currenlty implemented:
|
|
* MCSI2 Comm fffb2000 - fffb27ff (not mapped on OMAP310)
|
|
* MCSI1 Bluetooth fffb2800 - fffb2fff (not mapped on OMAP310)
|
|
* USB W2FC fffb4000 - fffb47ff
|
|
* Camera Interface fffb6800 - fffb6fff
|
|
* USB Host fffba000 - fffba7ff
|
|
* FAC fffba800 - fffbafff
|
|
* HDQ/1-Wire fffbc000 - fffbc7ff
|
|
* TIPB switches fffbc800 - fffbcfff
|
|
* Mailbox fffcf000 - fffcf7ff
|
|
* Local bus IF fffec100 - fffec1ff
|
|
* Local bus MMU fffec200 - fffec2ff
|
|
* DSP MMU fffed200 - fffed2ff
|
|
*/
|
|
|
|
omap_setup_dsp_mapping(system_memory, omap15xx_dsp_mm);
|
|
omap_setup_mpui_io(system_memory, s);
|
|
|
|
qemu_register_reset(omap1_mpu_reset, s);
|
|
|
|
return s;
|
|
}
|