mirrors/qemu
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
34e3c94eda
qemu/include/standard-headers/linux/ethtool.h
Vivek Goyal ef17dd6a8e linux-headers: Update headers to v5.17-rc1 
Update headers to 5.17-rc1. I need latest fuse changes.

Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Message-Id: <20220208204813.682906-3-vgoyal@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2022-02-17 17:21:45 +00:00

2097 lines
82 KiB
C
Raw Blame History

/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
/*
* ethtool.h: Defines for Linux ethtool.
*
* Copyright (C) 1998 David S. Miller (davem@redhat.com)
* Copyright 2001 Jeff Garzik <jgarzik@pobox.com>
* Portions Copyright 2001 Sun Microsystems (thockin@sun.com)
* Portions Copyright 2002 Intel (eli.kupermann@intel.com,
* christopher.leech@intel.com,
* scott.feldman@intel.com)
* Portions Copyright (C) Sun Microsystems 2008
*/
#ifndef _LINUX_ETHTOOL_H
#define _LINUX_ETHTOOL_H
#include "net/eth.h"
#include "standard-headers/linux/const.h"
#include "standard-headers/linux/types.h"
#include "standard-headers/linux/if_ether.h"
#include <limits.h> /* for INT_MAX */
/* All structures exposed to userland should be defined such that they
* have the same layout for 32-bit and 64-bit userland.
*/
/* Note on reserved space.
* Reserved fields must not be accessed directly by user space because
* they may be replaced by a different field in the future. They must
* be initialized to zero before making the request, e.g. via memset
* of the entire structure or implicitly by not being set in a structure
* initializer.
*/
/**
* struct ethtool_cmd - DEPRECATED, link control and status
* This structure is DEPRECATED, please use struct ethtool_link_settings.
* @cmd: Command number = %ETHTOOL_GSET or %ETHTOOL_SSET
* @supported: Bitmask of %SUPPORTED_* flags for the link modes,
* physical connectors and other link features for which the
* interface supports autonegotiation or auto-detection.
* Read-only.
* @advertising: Bitmask of %ADVERTISED_* flags for the link modes,
* physical connectors and other link features that are
* advertised through autonegotiation or enabled for
* auto-detection.
* @speed: Low bits of the speed, 1Mb units, 0 to INT_MAX or SPEED_UNKNOWN
* @duplex: Duplex mode; one of %DUPLEX_*
* @port: Physical connector type; one of %PORT_*
* @phy_address: MDIO address of PHY (transceiver); 0 or 255 if not
* applicable. For clause 45 PHYs this is the PRTAD.
* @transceiver: Historically used to distinguish different possible
* PHY types, but not in a consistent way. Deprecated.
* @autoneg: Enable/disable autonegotiation and auto-detection;
* either %AUTONEG_DISABLE or %AUTONEG_ENABLE
* @mdio_support: Bitmask of %ETH_MDIO_SUPPORTS_* flags for the MDIO
* protocols supported by the interface; 0 if unknown.
* Read-only.
* @maxtxpkt: Historically used to report TX IRQ coalescing; now
* obsoleted by &struct ethtool_coalesce. Read-only; deprecated.
* @maxrxpkt: Historically used to report RX IRQ coalescing; now
* obsoleted by &struct ethtool_coalesce. Read-only; deprecated.
* @speed_hi: High bits of the speed, 1Mb units, 0 to INT_MAX or SPEED_UNKNOWN
* @eth_tp_mdix: Ethernet twisted-pair MDI(-X) status; one of
* %ETH_TP_MDI_*. If the status is unknown or not applicable, the
* value will be %ETH_TP_MDI_INVALID. Read-only.
* @eth_tp_mdix_ctrl: Ethernet twisted pair MDI(-X) control; one of
* %ETH_TP_MDI_*. If MDI(-X) control is not implemented, reads
* yield %ETH_TP_MDI_INVALID and writes may be ignored or rejected.
* When written successfully, the link should be renegotiated if
* necessary.
* @lp_advertising: Bitmask of %ADVERTISED_* flags for the link modes
* and other link features that the link partner advertised
* through autonegotiation; 0 if unknown or not applicable.
* Read-only.
* @reserved: Reserved for future use; see the note on reserved space.
*
* The link speed in Mbps is split between @speed and @speed_hi. Use
* the ethtool_cmd_speed() and ethtool_cmd_speed_set() functions to
* access it.
*
* If autonegotiation is disabled, the speed and @duplex represent the
* fixed link mode and are writable if the driver supports multiple
* link modes. If it is enabled then they are read-only; if the link
* is up they represent the negotiated link mode; if the link is down,
* the speed is 0, %SPEED_UNKNOWN or the highest enabled speed and
* @duplex is %DUPLEX_UNKNOWN or the best enabled duplex mode.
*
* Some hardware interfaces may have multiple PHYs and/or physical
* connectors fitted or do not allow the driver to detect which are
* fitted. For these interfaces @port and/or @phy_address may be
* writable, possibly dependent on @autoneg being %AUTONEG_DISABLE.
* Otherwise, attempts to write different values may be ignored or
* rejected.
*
* Users should assume that all fields not marked read-only are
* writable and subject to validation by the driver. They should use
* %ETHTOOL_GSET to get the current values before making specific
* changes and then applying them with %ETHTOOL_SSET.
*
* Deprecated fields should be ignored by both users and drivers.
*/
struct ethtool_cmd {
uint32_t cmd;
uint32_t supported;
uint32_t advertising;
uint16_t speed;
uint8_t duplex;
uint8_t port;
uint8_t phy_address;
uint8_t transceiver;
uint8_t autoneg;
uint8_t mdio_support;
uint32_t maxtxpkt;
uint32_t maxrxpkt;
uint16_t speed_hi;
uint8_t eth_tp_mdix;
uint8_t eth_tp_mdix_ctrl;
uint32_t lp_advertising;
uint32_t reserved[2];
};
static inline void ethtool_cmd_speed_set(struct ethtool_cmd *ep,
uint32_t speed)
{
ep->speed = (uint16_t)(speed & 0xFFFF);
ep->speed_hi = (uint16_t)(speed >> 16);
}
static inline uint32_t ethtool_cmd_speed(const struct ethtool_cmd *ep)
{
return (ep->speed_hi << 16) | ep->speed;
}
/* Device supports clause 22 register access to PHY or peripherals
* using the interface defined in "standard-headers/linux/mii.h". This should not be
* set if there are known to be no such peripherals present or if
* the driver only emulates clause 22 registers for compatibility.
*/
#define ETH_MDIO_SUPPORTS_C22 1
/* Device supports clause 45 register access to PHY or peripherals
* using the interface defined in "standard-headers/linux/mii.h" and <linux/mdio.h>.
* This should not be set if there are known to be no such peripherals
* present.
*/
#define ETH_MDIO_SUPPORTS_C45 2
#define ETHTOOL_FWVERS_LEN 32
#define ETHTOOL_BUSINFO_LEN 32
#define ETHTOOL_EROMVERS_LEN 32
/**
* struct ethtool_drvinfo - general driver and device information
* @cmd: Command number = %ETHTOOL_GDRVINFO
* @driver: Driver short name. This should normally match the name
* in its bus driver structure (e.g. pci_driver::name). Must
* not be an empty string.
* @version: Driver version string; may be an empty string
* @fw_version: Firmware version string; may be an empty string
* @erom_version: Expansion ROM version string; may be an empty string
* @bus_info: Device bus address. This should match the dev_name()
* string for the underlying bus device, if there is one. May be
* an empty string.
* @reserved2: Reserved for future use; see the note on reserved space.
* @n_priv_flags: Number of flags valid for %ETHTOOL_GPFLAGS and
* %ETHTOOL_SPFLAGS commands; also the number of strings in the
* %ETH_SS_PRIV_FLAGS set
* @n_stats: Number of uint64_t statistics returned by the %ETHTOOL_GSTATS
* command; also the number of strings in the %ETH_SS_STATS set
* @testinfo_len: Number of results returned by the %ETHTOOL_TEST
* command; also the number of strings in the %ETH_SS_TEST set
* @eedump_len: Size of EEPROM accessible through the %ETHTOOL_GEEPROM
* and %ETHTOOL_SEEPROM commands, in bytes
* @regdump_len: Size of register dump returned by the %ETHTOOL_GREGS
* command, in bytes
*
* Users can use the %ETHTOOL_GSSET_INFO command to get the number of
* strings in any string set (from Linux 2.6.34).
*
* Drivers should set at most @driver, @version, @fw_version and
* @bus_info in their get_drvinfo() implementation. The ethtool
* core fills in the other fields using other driver operations.
*/
struct ethtool_drvinfo {
uint32_t cmd;
char driver[32];
char version[32];
char fw_version[ETHTOOL_FWVERS_LEN];
char bus_info[ETHTOOL_BUSINFO_LEN];
char erom_version[ETHTOOL_EROMVERS_LEN];
char reserved2[12];
uint32_t n_priv_flags;
uint32_t n_stats;
uint32_t testinfo_len;
uint32_t eedump_len;
uint32_t regdump_len;
};
#define SOPASS_MAX 6
/**
* struct ethtool_wolinfo - Wake-On-Lan configuration
* @cmd: Command number = %ETHTOOL_GWOL or %ETHTOOL_SWOL
* @supported: Bitmask of %WAKE_* flags for supported Wake-On-Lan modes.
* Read-only.
* @wolopts: Bitmask of %WAKE_* flags for enabled Wake-On-Lan modes.
* @sopass: SecureOn(tm) password; meaningful only if %WAKE_MAGICSECURE
* is set in @wolopts.
*/
struct ethtool_wolinfo {
uint32_t cmd;
uint32_t supported;
uint32_t wolopts;
uint8_t sopass[SOPASS_MAX];
};
/* for passing single values */
struct ethtool_value {
uint32_t cmd;
uint32_t data;
};
#define PFC_STORM_PREVENTION_AUTO 0xffff
#define PFC_STORM_PREVENTION_DISABLE 0
enum tunable_id {
ETHTOOL_ID_UNSPEC,
ETHTOOL_RX_COPYBREAK,
ETHTOOL_TX_COPYBREAK,
ETHTOOL_PFC_PREVENTION_TOUT, /* timeout in msecs */
ETHTOOL_TX_COPYBREAK_BUF_SIZE,
/*
* Add your fresh new tunable attribute above and remember to update
* tunable_strings[] in net/ethtool/common.c
*/
__ETHTOOL_TUNABLE_COUNT,
};
enum tunable_type_id {
ETHTOOL_TUNABLE_UNSPEC,
ETHTOOL_TUNABLE_U8,
ETHTOOL_TUNABLE_U16,
ETHTOOL_TUNABLE_U32,
ETHTOOL_TUNABLE_U64,
ETHTOOL_TUNABLE_STRING,
ETHTOOL_TUNABLE_S8,
ETHTOOL_TUNABLE_S16,
ETHTOOL_TUNABLE_S32,
ETHTOOL_TUNABLE_S64,
};
struct ethtool_tunable {
uint32_t cmd;
uint32_t id;
uint32_t type_id;
uint32_t len;
void *data[0];
};
#define DOWNSHIFT_DEV_DEFAULT_COUNT 0xff
#define DOWNSHIFT_DEV_DISABLE 0
/* Time in msecs after which link is reported as down
* 0 = lowest time supported by the PHY
* 0xff = off, link down detection according to standard
*/
#define ETHTOOL_PHY_FAST_LINK_DOWN_ON 0
#define ETHTOOL_PHY_FAST_LINK_DOWN_OFF 0xff
/* Energy Detect Power Down (EDPD) is a feature supported by some PHYs, where
* the PHY's RX & TX blocks are put into a low-power mode when there is no
* link detected (typically cable is un-plugged). For RX, only a minimal
* link-detection is available, and for TX the PHY wakes up to send link pulses
* to avoid any lock-ups in case the peer PHY may also be running in EDPD mode.
*
* Some PHYs may support configuration of the wake-up interval for TX pulses,
* and some PHYs may support only disabling TX pulses entirely. For the latter
* a special value is required (ETHTOOL_PHY_EDPD_NO_TX) so that this can be
* configured from userspace (should the user want it).
*
* The interval units for TX wake-up are in milliseconds, since this should
* cover a reasonable range of intervals:
* - from 1 millisecond, which does not sound like much of a power-saver
* - to ~65 seconds which is quite a lot to wait for a link to come up when
* plugging a cable
*/
#define ETHTOOL_PHY_EDPD_DFLT_TX_MSECS 0xffff
#define ETHTOOL_PHY_EDPD_NO_TX 0xfffe
#define ETHTOOL_PHY_EDPD_DISABLE 0
enum phy_tunable_id {
ETHTOOL_PHY_ID_UNSPEC,
ETHTOOL_PHY_DOWNSHIFT,
ETHTOOL_PHY_FAST_LINK_DOWN,
ETHTOOL_PHY_EDPD,
/*
* Add your fresh new phy tunable attribute above and remember to update
* phy_tunable_strings[] in net/ethtool/common.c
*/
__ETHTOOL_PHY_TUNABLE_COUNT,
};
/**
* struct ethtool_regs - hardware register dump
* @cmd: Command number = %ETHTOOL_GREGS
* @version: Dump format version. This is driver-specific and may
* distinguish different chips/revisions. Drivers must use new
* version numbers whenever the dump format changes in an
* incompatible way.
* @len: On entry, the real length of @data. On return, the number of
* bytes used.
* @data: Buffer for the register dump
*
* Users should use %ETHTOOL_GDRVINFO to find the maximum length of
* a register dump for the interface. They must allocate the buffer
* immediately following this structure.
*/
struct ethtool_regs {
uint32_t cmd;
uint32_t version;
uint32_t len;
uint8_t data[0];
};
/**
* struct ethtool_eeprom - EEPROM dump
* @cmd: Command number = %ETHTOOL_GEEPROM, %ETHTOOL_GMODULEEEPROM or
* %ETHTOOL_SEEPROM
* @magic: A 'magic cookie' value to guard against accidental changes.
* The value passed in to %ETHTOOL_SEEPROM must match the value
* returned by %ETHTOOL_GEEPROM for the same device. This is
* unused when @cmd is %ETHTOOL_GMODULEEEPROM.
* @offset: Offset within the EEPROM to begin reading/writing, in bytes
* @len: On entry, number of bytes to read/write. On successful
* return, number of bytes actually read/written. In case of
* error, this may indicate at what point the error occurred.
* @data: Buffer to read/write from
*
* Users may use %ETHTOOL_GDRVINFO or %ETHTOOL_GMODULEINFO to find
* the length of an on-board or module EEPROM, respectively. They
* must allocate the buffer immediately following this structure.
*/
struct ethtool_eeprom {
uint32_t cmd;
uint32_t magic;
uint32_t offset;
uint32_t len;
uint8_t data[0];
};
/**
* struct ethtool_eee - Energy Efficient Ethernet information
* @cmd: ETHTOOL_{G,S}EEE
* @supported: Mask of %SUPPORTED_* flags for the speed/duplex combinations
* for which there is EEE support.
* @advertised: Mask of %ADVERTISED_* flags for the speed/duplex combinations
* advertised as eee capable.
* @lp_advertised: Mask of %ADVERTISED_* flags for the speed/duplex
* combinations advertised by the link partner as eee capable.
* @eee_active: Result of the eee auto negotiation.
* @eee_enabled: EEE configured mode (enabled/disabled).
* @tx_lpi_enabled: Whether the interface should assert its tx lpi, given
* that eee was negotiated.
* @tx_lpi_timer: Time in microseconds the interface delays prior to asserting
* its tx lpi (after reaching 'idle' state). Effective only when eee
* was negotiated and tx_lpi_enabled was set.
* @reserved: Reserved for future use; see the note on reserved space.
*/
struct ethtool_eee {
uint32_t cmd;
uint32_t supported;
uint32_t advertised;
uint32_t lp_advertised;
uint32_t eee_active;
uint32_t eee_enabled;
uint32_t tx_lpi_enabled;
uint32_t tx_lpi_timer;
uint32_t reserved[2];
};
/**
* struct ethtool_modinfo - plugin module eeprom information
* @cmd: %ETHTOOL_GMODULEINFO
* @type: Standard the module information conforms to %ETH_MODULE_SFF_xxxx
* @eeprom_len: Length of the eeprom
* @reserved: Reserved for future use; see the note on reserved space.
*
* This structure is used to return the information to
* properly size memory for a subsequent call to %ETHTOOL_GMODULEEEPROM.
* The type code indicates the eeprom data format
*/
struct ethtool_modinfo {
uint32_t cmd;
uint32_t type;
uint32_t eeprom_len;
uint32_t reserved[8];
};
/**
* struct ethtool_coalesce - coalescing parameters for IRQs and stats updates
* @cmd: ETHTOOL_{G,S}COALESCE
* @rx_coalesce_usecs: How many usecs to delay an RX interrupt after
* a packet arrives.
* @rx_max_coalesced_frames: Maximum number of packets to receive
* before an RX interrupt.
* @rx_coalesce_usecs_irq: Same as @rx_coalesce_usecs, except that
* this value applies while an IRQ is being serviced by the host.
* @rx_max_coalesced_frames_irq: Same as @rx_max_coalesced_frames,
* except that this value applies while an IRQ is being serviced
* by the host.
* @tx_coalesce_usecs: How many usecs to delay a TX interrupt after
* a packet is sent.
* @tx_max_coalesced_frames: Maximum number of packets to be sent
* before a TX interrupt.
* @tx_coalesce_usecs_irq: Same as @tx_coalesce_usecs, except that
* this value applies while an IRQ is being serviced by the host.
* @tx_max_coalesced_frames_irq: Same as @tx_max_coalesced_frames,
* except that this value applies while an IRQ is being serviced
* by the host.
* @stats_block_coalesce_usecs: How many usecs to delay in-memory
* statistics block updates. Some drivers do not have an
* in-memory statistic block, and in such cases this value is
* ignored. This value must not be zero.
* @use_adaptive_rx_coalesce: Enable adaptive RX coalescing.
* @use_adaptive_tx_coalesce: Enable adaptive TX coalescing.
* @pkt_rate_low: Threshold for low packet rate (packets per second).
* @rx_coalesce_usecs_low: How many usecs to delay an RX interrupt after
* a packet arrives, when the packet rate is below @pkt_rate_low.
* @rx_max_coalesced_frames_low: Maximum number of packets to be received
* before an RX interrupt, when the packet rate is below @pkt_rate_low.
* @tx_coalesce_usecs_low: How many usecs to delay a TX interrupt after
* a packet is sent, when the packet rate is below @pkt_rate_low.
* @tx_max_coalesced_frames_low: Maximum nuumber of packets to be sent before
* a TX interrupt, when the packet rate is below @pkt_rate_low.
* @pkt_rate_high: Threshold for high packet rate (packets per second).
* @rx_coalesce_usecs_high: How many usecs to delay an RX interrupt after
* a packet arrives, when the packet rate is above @pkt_rate_high.
* @rx_max_coalesced_frames_high: Maximum number of packets to be received
* before an RX interrupt, when the packet rate is above @pkt_rate_high.
* @tx_coalesce_usecs_high: How many usecs to delay a TX interrupt after
* a packet is sent, when the packet rate is above @pkt_rate_high.
* @tx_max_coalesced_frames_high: Maximum number of packets to be sent before
* a TX interrupt, when the packet rate is above @pkt_rate_high.
* @rate_sample_interval: How often to do adaptive coalescing packet rate
* sampling, measured in seconds. Must not be zero.
*
* Each pair of (usecs, max_frames) fields specifies that interrupts
* should be coalesced until
* (usecs > 0 && time_since_first_completion >= usecs) ||
* (max_frames > 0 && completed_frames >= max_frames)
*
* It is illegal to set both usecs and max_frames to zero as this
* would cause interrupts to never be generated. To disable
* coalescing, set usecs = 0 and max_frames = 1.
*
* Some implementations ignore the value of max_frames and use the
* condition time_since_first_completion >= usecs
*
* This is deprecated. Drivers for hardware that does not support
* counting completions should validate that max_frames == !rx_usecs.
*
* Adaptive RX/TX coalescing is an algorithm implemented by some
* drivers to improve latency under low packet rates and improve
* throughput under high packet rates. Some drivers only implement
* one of RX or TX adaptive coalescing. Anything not implemented by
* the driver causes these values to be silently ignored.
*
* When the packet rate is below @pkt_rate_high but above
* @pkt_rate_low (both measured in packets per second) the
* normal {rx,tx}_* coalescing parameters are used.
*/
struct ethtool_coalesce {
uint32_t cmd;
uint32_t rx_coalesce_usecs;
uint32_t rx_max_coalesced_frames;
uint32_t rx_coalesce_usecs_irq;
uint32_t rx_max_coalesced_frames_irq;
uint32_t tx_coalesce_usecs;
uint32_t tx_max_coalesced_frames;
uint32_t tx_coalesce_usecs_irq;
uint32_t tx_max_coalesced_frames_irq;
uint32_t stats_block_coalesce_usecs;
uint32_t use_adaptive_rx_coalesce;
uint32_t use_adaptive_tx_coalesce;
uint32_t pkt_rate_low;
uint32_t rx_coalesce_usecs_low;
uint32_t rx_max_coalesced_frames_low;
uint32_t tx_coalesce_usecs_low;
uint32_t tx_max_coalesced_frames_low;
uint32_t pkt_rate_high;
uint32_t rx_coalesce_usecs_high;
uint32_t rx_max_coalesced_frames_high;
uint32_t tx_coalesce_usecs_high;
uint32_t tx_max_coalesced_frames_high;
uint32_t rate_sample_interval;
};
/**
* struct ethtool_ringparam - RX/TX ring parameters
* @cmd: Command number = %ETHTOOL_GRINGPARAM or %ETHTOOL_SRINGPARAM
* @rx_max_pending: Maximum supported number of pending entries per
* RX ring. Read-only.
* @rx_mini_max_pending: Maximum supported number of pending entries
* per RX mini ring. Read-only.
* @rx_jumbo_max_pending: Maximum supported number of pending entries
* per RX jumbo ring. Read-only.
* @tx_max_pending: Maximum supported number of pending entries per
* TX ring. Read-only.
* @rx_pending: Current maximum number of pending entries per RX ring
* @rx_mini_pending: Current maximum number of pending entries per RX
* mini ring
* @rx_jumbo_pending: Current maximum number of pending entries per RX
* jumbo ring
* @tx_pending: Current maximum supported number of pending entries
* per TX ring
*
* If the interface does not have separate RX mini and/or jumbo rings,
* @rx_mini_max_pending and/or @rx_jumbo_max_pending will be 0.
*
* There may also be driver-dependent minimum values for the number
* of entries per ring.
*/
struct ethtool_ringparam {
uint32_t cmd;
uint32_t rx_max_pending;
uint32_t rx_mini_max_pending;
uint32_t rx_jumbo_max_pending;
uint32_t tx_max_pending;
uint32_t rx_pending;
uint32_t rx_mini_pending;
uint32_t rx_jumbo_pending;
uint32_t tx_pending;
};
/**
* struct ethtool_channels - configuring number of network channel
* @cmd: ETHTOOL_{G,S}CHANNELS
* @max_rx: Read only. Maximum number of receive channel the driver support.
* @max_tx: Read only. Maximum number of transmit channel the driver support.
* @max_other: Read only. Maximum number of other channel the driver support.
* @max_combined: Read only. Maximum number of combined channel the driver
* support. Set of queues RX, TX or other.
* @rx_count: Valid values are in the range 1 to the max_rx.
* @tx_count: Valid values are in the range 1 to the max_tx.
* @other_count: Valid values are in the range 1 to the max_other.
* @combined_count: Valid values are in the range 1 to the max_combined.
*
* This can be used to configure RX, TX and other channels.
*/
struct ethtool_channels {
uint32_t cmd;
uint32_t max_rx;
uint32_t max_tx;
uint32_t max_other;
uint32_t max_combined;
uint32_t rx_count;
uint32_t tx_count;
uint32_t other_count;
uint32_t combined_count;
};
/**
* struct ethtool_pauseparam - Ethernet pause (flow control) parameters
* @cmd: Command number = %ETHTOOL_GPAUSEPARAM or %ETHTOOL_SPAUSEPARAM
* @autoneg: Flag to enable autonegotiation of pause frame use
* @rx_pause: Flag to enable reception of pause frames
* @tx_pause: Flag to enable transmission of pause frames
*
* Drivers should reject a non-zero setting of @autoneg when
* autoneogotiation is disabled (or not supported) for the link.
*
* If the link is autonegotiated, drivers should use
* mii_advertise_flowctrl() or similar code to set the advertised
* pause frame capabilities based on the @rx_pause and @tx_pause flags,
* even if @autoneg is zero. They should also allow the advertised
* pause frame capabilities to be controlled directly through the
* advertising field of &struct ethtool_cmd.
*
* If @autoneg is non-zero, the MAC is configured to send and/or
* receive pause frames according to the result of autonegotiation.
* Otherwise, it is configured directly based on the @rx_pause and
* @tx_pause flags.
*/
struct ethtool_pauseparam {
uint32_t cmd;
uint32_t autoneg;
uint32_t rx_pause;
uint32_t tx_pause;
};
/* Link extended state */
enum ethtool_link_ext_state {
ETHTOOL_LINK_EXT_STATE_AUTONEG,
ETHTOOL_LINK_EXT_STATE_LINK_TRAINING_FAILURE,
ETHTOOL_LINK_EXT_STATE_LINK_LOGICAL_MISMATCH,
ETHTOOL_LINK_EXT_STATE_BAD_SIGNAL_INTEGRITY,
ETHTOOL_LINK_EXT_STATE_NO_CABLE,
ETHTOOL_LINK_EXT_STATE_CABLE_ISSUE,
ETHTOOL_LINK_EXT_STATE_EEPROM_ISSUE,
ETHTOOL_LINK_EXT_STATE_CALIBRATION_FAILURE,
ETHTOOL_LINK_EXT_STATE_POWER_BUDGET_EXCEEDED,
ETHTOOL_LINK_EXT_STATE_OVERHEAT,
ETHTOOL_LINK_EXT_STATE_MODULE,
};
/* More information in addition to ETHTOOL_LINK_EXT_STATE_AUTONEG. */
enum ethtool_link_ext_substate_autoneg {
ETHTOOL_LINK_EXT_SUBSTATE_AN_NO_PARTNER_DETECTED = 1,
ETHTOOL_LINK_EXT_SUBSTATE_AN_ACK_NOT_RECEIVED,
ETHTOOL_LINK_EXT_SUBSTATE_AN_NEXT_PAGE_EXCHANGE_FAILED,
ETHTOOL_LINK_EXT_SUBSTATE_AN_NO_PARTNER_DETECTED_FORCE_MODE,
ETHTOOL_LINK_EXT_SUBSTATE_AN_FEC_MISMATCH_DURING_OVERRIDE,
ETHTOOL_LINK_EXT_SUBSTATE_AN_NO_HCD,
};
/* More information in addition to ETHTOOL_LINK_EXT_STATE_LINK_TRAINING_FAILURE.
*/
enum ethtool_link_ext_substate_link_training {
ETHTOOL_LINK_EXT_SUBSTATE_LT_KR_FRAME_LOCK_NOT_ACQUIRED = 1,
ETHTOOL_LINK_EXT_SUBSTATE_LT_KR_LINK_INHIBIT_TIMEOUT,
ETHTOOL_LINK_EXT_SUBSTATE_LT_KR_LINK_PARTNER_DID_NOT_SET_RECEIVER_READY,
ETHTOOL_LINK_EXT_SUBSTATE_LT_REMOTE_FAULT,
};
/* More information in addition to ETHTOOL_LINK_EXT_STATE_LINK_LOGICAL_MISMATCH.
*/
enum ethtool_link_ext_substate_link_logical_mismatch {
ETHTOOL_LINK_EXT_SUBSTATE_LLM_PCS_DID_NOT_ACQUIRE_BLOCK_LOCK = 1,
ETHTOOL_LINK_EXT_SUBSTATE_LLM_PCS_DID_NOT_ACQUIRE_AM_LOCK,
ETHTOOL_LINK_EXT_SUBSTATE_LLM_PCS_DID_NOT_GET_ALIGN_STATUS,
ETHTOOL_LINK_EXT_SUBSTATE_LLM_FC_FEC_IS_NOT_LOCKED,
ETHTOOL_LINK_EXT_SUBSTATE_LLM_RS_FEC_IS_NOT_LOCKED,
};
/* More information in addition to ETHTOOL_LINK_EXT_STATE_BAD_SIGNAL_INTEGRITY.
*/
enum ethtool_link_ext_substate_bad_signal_integrity {
ETHTOOL_LINK_EXT_SUBSTATE_BSI_LARGE_NUMBER_OF_PHYSICAL_ERRORS = 1,
ETHTOOL_LINK_EXT_SUBSTATE_BSI_UNSUPPORTED_RATE,
ETHTOOL_LINK_EXT_SUBSTATE_BSI_SERDES_REFERENCE_CLOCK_LOST,
ETHTOOL_LINK_EXT_SUBSTATE_BSI_SERDES_ALOS,
};
/* More information in addition to ETHTOOL_LINK_EXT_STATE_CABLE_ISSUE. */
enum ethtool_link_ext_substate_cable_issue {
ETHTOOL_LINK_EXT_SUBSTATE_CI_UNSUPPORTED_CABLE = 1,
ETHTOOL_LINK_EXT_SUBSTATE_CI_CABLE_TEST_FAILURE,
};
/* More information in addition to ETHTOOL_LINK_EXT_STATE_MODULE. */
enum ethtool_link_ext_substate_module {
ETHTOOL_LINK_EXT_SUBSTATE_MODULE_CMIS_NOT_READY = 1,
};
#define ETH_GSTRING_LEN 32
/**
* enum ethtool_stringset - string set ID
* @ETH_SS_TEST: Self-test result names, for use with %ETHTOOL_TEST
* @ETH_SS_STATS: Statistic names, for use with %ETHTOOL_GSTATS
* @ETH_SS_PRIV_FLAGS: Driver private flag names, for use with
* %ETHTOOL_GPFLAGS and %ETHTOOL_SPFLAGS
* @ETH_SS_NTUPLE_FILTERS: Previously used with %ETHTOOL_GRXNTUPLE;
* now deprecated
* @ETH_SS_FEATURES: Device feature names
* @ETH_SS_RSS_HASH_FUNCS: RSS hush function names
* @ETH_SS_TUNABLES: tunable names
* @ETH_SS_PHY_STATS: Statistic names, for use with %ETHTOOL_GPHYSTATS
* @ETH_SS_PHY_TUNABLES: PHY tunable names
* @ETH_SS_LINK_MODES: link mode names
* @ETH_SS_MSG_CLASSES: debug message class names
* @ETH_SS_WOL_MODES: wake-on-lan modes
* @ETH_SS_SOF_TIMESTAMPING: SOF_TIMESTAMPING_* flags
* @ETH_SS_TS_TX_TYPES: timestamping Tx types
* @ETH_SS_TS_RX_FILTERS: timestamping Rx filters
* @ETH_SS_UDP_TUNNEL_TYPES: UDP tunnel types
* @ETH_SS_STATS_STD: standardized stats
* @ETH_SS_STATS_ETH_PHY: names of IEEE 802.3 PHY statistics
* @ETH_SS_STATS_ETH_MAC: names of IEEE 802.3 MAC statistics
* @ETH_SS_STATS_ETH_CTRL: names of IEEE 802.3 MAC Control statistics
* @ETH_SS_STATS_RMON: names of RMON statistics
*
* @ETH_SS_COUNT: number of defined string sets
*/
enum ethtool_stringset {
ETH_SS_TEST = 0,
ETH_SS_STATS,
ETH_SS_PRIV_FLAGS,
ETH_SS_NTUPLE_FILTERS,
ETH_SS_FEATURES,
ETH_SS_RSS_HASH_FUNCS,
ETH_SS_TUNABLES,
ETH_SS_PHY_STATS,
ETH_SS_PHY_TUNABLES,
ETH_SS_LINK_MODES,
ETH_SS_MSG_CLASSES,
ETH_SS_WOL_MODES,
ETH_SS_SOF_TIMESTAMPING,
ETH_SS_TS_TX_TYPES,
ETH_SS_TS_RX_FILTERS,
ETH_SS_UDP_TUNNEL_TYPES,
ETH_SS_STATS_STD,
ETH_SS_STATS_ETH_PHY,
ETH_SS_STATS_ETH_MAC,
ETH_SS_STATS_ETH_CTRL,
ETH_SS_STATS_RMON,
/* add new constants above here */
ETH_SS_COUNT
};
/**
* enum ethtool_module_power_mode_policy - plug-in module power mode policy
* @ETHTOOL_MODULE_POWER_MODE_POLICY_HIGH: Module is always in high power mode.
* @ETHTOOL_MODULE_POWER_MODE_POLICY_AUTO: Module is transitioned by the host
* to high power mode when the first port using it is put administratively
* up and to low power mode when the last port using it is put
* administratively down.
*/
enum ethtool_module_power_mode_policy {
ETHTOOL_MODULE_POWER_MODE_POLICY_HIGH = 1,
ETHTOOL_MODULE_POWER_MODE_POLICY_AUTO,
};
/**
* enum ethtool_module_power_mode - plug-in module power mode
* @ETHTOOL_MODULE_POWER_MODE_LOW: Module is in low power mode.
* @ETHTOOL_MODULE_POWER_MODE_HIGH: Module is in high power mode.
*/
enum ethtool_module_power_mode {
ETHTOOL_MODULE_POWER_MODE_LOW = 1,
ETHTOOL_MODULE_POWER_MODE_HIGH,
};
/**
* struct ethtool_gstrings - string set for data tagging
* @cmd: Command number = %ETHTOOL_GSTRINGS
* @string_set: String set ID; one of &enum ethtool_stringset
* @len: On return, the number of strings in the string set
* @data: Buffer for strings. Each string is null-padded to a size of
* %ETH_GSTRING_LEN.
*
* Users must use %ETHTOOL_GSSET_INFO to find the number of strings in
* the string set. They must allocate a buffer of the appropriate
* size immediately following this structure.
*/
struct ethtool_gstrings {
uint32_t cmd;
uint32_t string_set;
uint32_t len;
uint8_t data[0];
};
/**
* struct ethtool_sset_info - string set information
* @cmd: Command number = %ETHTOOL_GSSET_INFO
* @reserved: Reserved for future use; see the note on reserved space.
* @sset_mask: On entry, a bitmask of string sets to query, with bits
* numbered according to &enum ethtool_stringset. On return, a
* bitmask of those string sets queried that are supported.
* @data: Buffer for string set sizes. On return, this contains the
* size of each string set that was queried and supported, in
* order of ID.
*
* Example: The user passes in @sset_mask = 0x7 (sets 0, 1, 2) and on
* return @sset_mask == 0x6 (sets 1, 2). Then @data[0] contains the
* size of set 1 and @data[1] contains the size of set 2.
*
* Users must allocate a buffer of the appropriate size (4 * number of
* sets queried) immediately following this structure.
*/
struct ethtool_sset_info {
uint32_t cmd;
uint32_t reserved;
uint64_t sset_mask;
uint32_t data[0];
};
/**
* enum ethtool_test_flags - flags definition of ethtool_test
* @ETH_TEST_FL_OFFLINE: if set perform online and offline tests, otherwise
* only online tests.
* @ETH_TEST_FL_FAILED: Driver set this flag if test fails.
* @ETH_TEST_FL_EXTERNAL_LB: Application request to perform external loopback
* test.
* @ETH_TEST_FL_EXTERNAL_LB_DONE: Driver performed the external loopback test
*/
enum ethtool_test_flags {
ETH_TEST_FL_OFFLINE = (1 << 0),
ETH_TEST_FL_FAILED = (1 << 1),
ETH_TEST_FL_EXTERNAL_LB = (1 << 2),
ETH_TEST_FL_EXTERNAL_LB_DONE = (1 << 3),
};
/**
* struct ethtool_test - device self-test invocation
* @cmd: Command number = %ETHTOOL_TEST
* @flags: A bitmask of flags from &enum ethtool_test_flags. Some
* flags may be set by the user on entry; others may be set by
* the driver on return.
* @reserved: Reserved for future use; see the note on reserved space.
* @len: On return, the number of test results
* @data: Array of test results
*
* Users must use %ETHTOOL_GSSET_INFO or %ETHTOOL_GDRVINFO to find the
* number of test results that will be returned. They must allocate a
* buffer of the appropriate size (8 * number of results) immediately
* following this structure.
*/
struct ethtool_test {
uint32_t cmd;
uint32_t flags;
uint32_t reserved;
uint32_t len;
uint64_t data[0];
};
/**
* struct ethtool_stats - device-specific statistics
* @cmd: Command number = %ETHTOOL_GSTATS
* @n_stats: On return, the number of statistics
* @data: Array of statistics
*
* Users must use %ETHTOOL_GSSET_INFO or %ETHTOOL_GDRVINFO to find the
* number of statistics that will be returned. They must allocate a
* buffer of the appropriate size (8 * number of statistics)
* immediately following this structure.
*/
struct ethtool_stats {
uint32_t cmd;
uint32_t n_stats;
uint64_t data[0];
};
/**
* struct ethtool_perm_addr - permanent hardware address
* @cmd: Command number = %ETHTOOL_GPERMADDR
* @size: On entry, the size of the buffer. On return, the size of the
* address. The command fails if the buffer is too small.
* @data: Buffer for the address
*
* Users must allocate the buffer immediately following this structure.
* A buffer size of %MAX_ADDR_LEN should be sufficient for any address
* type.
*/
struct ethtool_perm_addr {
uint32_t cmd;
uint32_t size;
uint8_t data[0];
};
/* boolean flags controlling per-interface behavior characteristics.
* When reading, the flag indicates whether or not a certain behavior
* is enabled/present. When writing, the flag indicates whether
* or not the driver should turn on (set) or off (clear) a behavior.
*
* Some behaviors may read-only (unconditionally absent or present).
* If such is the case, return EINVAL in the set-flags operation if the
* flag differs from the read-only value.
*/
enum ethtool_flags {
ETH_FLAG_TXVLAN = (1 << 7), /* TX VLAN offload enabled */
ETH_FLAG_RXVLAN = (1 << 8), /* RX VLAN offload enabled */
ETH_FLAG_LRO = (1 << 15), /* LRO is enabled */
ETH_FLAG_NTUPLE = (1 << 27), /* N-tuple filters enabled */
ETH_FLAG_RXHASH = (1 << 28),
};
/* The following structures are for supporting RX network flow
* classification and RX n-tuple configuration. Note, all multibyte
* fields, e.g., ip4src, ip4dst, psrc, pdst, spi, etc. are expected to
* be in network byte order.
*/
/**
* struct ethtool_tcpip4_spec - flow specification for TCP/IPv4 etc.
* @ip4src: Source host
* @ip4dst: Destination host
* @psrc: Source port
* @pdst: Destination port
* @tos: Type-of-service
*
* This can be used to specify a TCP/IPv4, UDP/IPv4 or SCTP/IPv4 flow.
*/
struct ethtool_tcpip4_spec {
uint32_t ip4src;
uint32_t ip4dst;
uint16_t psrc;
uint16_t pdst;
uint8_t tos;
};
/**
* struct ethtool_ah_espip4_spec - flow specification for IPsec/IPv4
* @ip4src: Source host
* @ip4dst: Destination host
* @spi: Security parameters index
* @tos: Type-of-service
*
* This can be used to specify an IPsec transport or tunnel over IPv4.
*/
struct ethtool_ah_espip4_spec {
uint32_t ip4src;
uint32_t ip4dst;
uint32_t spi;
uint8_t tos;
};
#define ETH_RX_NFC_IP4 1
/**
* struct ethtool_usrip4_spec - general flow specification for IPv4
* @ip4src: Source host
* @ip4dst: Destination host
* @l4_4_bytes: First 4 bytes of transport (layer 4) header
* @tos: Type-of-service
* @ip_ver: Value must be %ETH_RX_NFC_IP4; mask must be 0
* @proto: Transport protocol number; mask must be 0
*/
struct ethtool_usrip4_spec {
uint32_t ip4src;
uint32_t ip4dst;
uint32_t l4_4_bytes;
uint8_t tos;
uint8_t ip_ver;
uint8_t proto;
};
/**
* struct ethtool_tcpip6_spec - flow specification for TCP/IPv6 etc.
* @ip6src: Source host
* @ip6dst: Destination host
* @psrc: Source port
* @pdst: Destination port
* @tclass: Traffic Class
*
* This can be used to specify a TCP/IPv6, UDP/IPv6 or SCTP/IPv6 flow.
*/
struct ethtool_tcpip6_spec {
uint32_t ip6src[4];
uint32_t ip6dst[4];
uint16_t psrc;
uint16_t pdst;
uint8_t tclass;
};
/**
* struct ethtool_ah_espip6_spec - flow specification for IPsec/IPv6
* @ip6src: Source host
* @ip6dst: Destination host
* @spi: Security parameters index
* @tclass: Traffic Class
*
* This can be used to specify an IPsec transport or tunnel over IPv6.
*/
struct ethtool_ah_espip6_spec {
uint32_t ip6src[4];
uint32_t ip6dst[4];
uint32_t spi;
uint8_t tclass;
};
/**
* struct ethtool_usrip6_spec - general flow specification for IPv6
* @ip6src: Source host
* @ip6dst: Destination host
* @l4_4_bytes: First 4 bytes of transport (layer 4) header
* @tclass: Traffic Class
* @l4_proto: Transport protocol number (nexthdr after any Extension Headers)
*/
struct ethtool_usrip6_spec {
uint32_t ip6src[4];
uint32_t ip6dst[4];
uint32_t l4_4_bytes;
uint8_t tclass;
uint8_t l4_proto;
};
union ethtool_flow_union {
struct ethtool_tcpip4_spec tcp_ip4_spec;
struct ethtool_tcpip4_spec udp_ip4_spec;
struct ethtool_tcpip4_spec sctp_ip4_spec;
struct ethtool_ah_espip4_spec ah_ip4_spec;
struct ethtool_ah_espip4_spec esp_ip4_spec;
struct ethtool_usrip4_spec usr_ip4_spec;
struct ethtool_tcpip6_spec tcp_ip6_spec;
struct ethtool_tcpip6_spec udp_ip6_spec;
struct ethtool_tcpip6_spec sctp_ip6_spec;
struct ethtool_ah_espip6_spec ah_ip6_spec;
struct ethtool_ah_espip6_spec esp_ip6_spec;
struct ethtool_usrip6_spec usr_ip6_spec;
struct eth_header ether_spec;
uint8_t hdata[52];
};
/**
* struct ethtool_flow_ext - additional RX flow fields
* @h_dest: destination MAC address
* @vlan_etype: VLAN EtherType
* @vlan_tci: VLAN tag control information
* @data: user defined data
* @padding: Reserved for future use; see the note on reserved space.
*
* Note, @vlan_etype, @vlan_tci, and @data are only valid if %FLOW_EXT
* is set in &struct ethtool_rx_flow_spec @flow_type.
* @h_dest is valid if %FLOW_MAC_EXT is set.
*/
struct ethtool_flow_ext {
uint8_t padding[2];
unsigned char h_dest[ETH_ALEN];
uint16_t vlan_etype;
uint16_t vlan_tci;
uint32_t data[2];
};
/**
* struct ethtool_rx_flow_spec - classification rule for RX flows
* @flow_type: Type of match to perform, e.g. %TCP_V4_FLOW
* @h_u: Flow fields to match (dependent on @flow_type)
* @h_ext: Additional fields to match
* @m_u: Masks for flow field bits to be matched
* @m_ext: Masks for additional field bits to be matched
* Note, all additional fields must be ignored unless @flow_type
* includes the %FLOW_EXT or %FLOW_MAC_EXT flag
* (see &struct ethtool_flow_ext description).
* @ring_cookie: RX ring/queue index to deliver to, or %RX_CLS_FLOW_DISC
* if packets should be discarded, or %RX_CLS_FLOW_WAKE if the
* packets should be used for Wake-on-LAN with %WAKE_FILTER
* @location: Location of rule in the table. Locations must be
* numbered such that a flow matching multiple rules will be
* classified according to the first (lowest numbered) rule.
*/
struct ethtool_rx_flow_spec {
uint32_t flow_type;
union ethtool_flow_union h_u;
struct ethtool_flow_ext h_ext;
union ethtool_flow_union m_u;
struct ethtool_flow_ext m_ext;
uint64_t ring_cookie;
uint32_t location;
};
/* How rings are laid out when accessing virtual functions or
* offloaded queues is device specific. To allow users to do flow
* steering and specify these queues the ring cookie is partitioned
* into a 32bit queue index with an 8 bit virtual function id.
* This also leaves the 3bytes for further specifiers. It is possible
* future devices may support more than 256 virtual functions if
* devices start supporting PCIe w/ARI. However at the moment I
* do not know of any devices that support this so I do not reserve
* space for this at this time. If a future patch consumes the next
* byte it should be aware of this possibility.
*/
#define ETHTOOL_RX_FLOW_SPEC_RING 0x00000000FFFFFFFFLL
#define ETHTOOL_RX_FLOW_SPEC_RING_VF 0x000000FF00000000LL
#define ETHTOOL_RX_FLOW_SPEC_RING_VF_OFF 32
static inline uint64_t ethtool_get_flow_spec_ring(uint64_t ring_cookie)
{
return ETHTOOL_RX_FLOW_SPEC_RING & ring_cookie;
}
static inline uint64_t ethtool_get_flow_spec_ring_vf(uint64_t ring_cookie)
{
return (ETHTOOL_RX_FLOW_SPEC_RING_VF & ring_cookie) >>
ETHTOOL_RX_FLOW_SPEC_RING_VF_OFF;
}
/**
* struct ethtool_rxnfc - command to get or set RX flow classification rules
* @cmd: Specific command number - %ETHTOOL_GRXFH, %ETHTOOL_SRXFH,
* %ETHTOOL_GRXRINGS, %ETHTOOL_GRXCLSRLCNT, %ETHTOOL_GRXCLSRULE,
* %ETHTOOL_GRXCLSRLALL, %ETHTOOL_SRXCLSRLDEL or %ETHTOOL_SRXCLSRLINS
* @flow_type: Type of flow to be affected, e.g. %TCP_V4_FLOW
* @data: Command-dependent value
* @fs: Flow classification rule
* @rss_context: RSS context to be affected
* @rule_cnt: Number of rules to be affected
* @rule_locs: Array of used rule locations
*
* For %ETHTOOL_GRXFH and %ETHTOOL_SRXFH, @data is a bitmask indicating
* the fields included in the flow hash, e.g. %RXH_IP_SRC. The following
* structure fields must not be used, except that if @flow_type includes
* the %FLOW_RSS flag, then @rss_context determines which RSS context to
* act on.
*
* For %ETHTOOL_GRXRINGS, @data is set to the number of RX rings/queues
* on return.
*
* For %ETHTOOL_GRXCLSRLCNT, @rule_cnt is set to the number of defined
* rules on return. If @data is non-zero on return then it is the
* size of the rule table, plus the flag %RX_CLS_LOC_SPECIAL if the
* driver supports any special location values. If that flag is not
* set in @data then special location values should not be used.
*
* For %ETHTOOL_GRXCLSRULE, @fs.@location specifies the location of an
* existing rule on entry and @fs contains the rule on return; if
* @fs.@flow_type includes the %FLOW_RSS flag, then @rss_context is
* filled with the RSS context ID associated with the rule.
*
* For %ETHTOOL_GRXCLSRLALL, @rule_cnt specifies the array size of the
* user buffer for @rule_locs on entry. On return, @data is the size
* of the rule table, @rule_cnt is the number of defined rules, and
* @rule_locs contains the locations of the defined rules. Drivers
* must use the second parameter to get_rxnfc() instead of @rule_locs.
*
* For %ETHTOOL_SRXCLSRLINS, @fs specifies the rule to add or update.
* @fs.@location either specifies the location to use or is a special
* location value with %RX_CLS_LOC_SPECIAL flag set. On return,
* @fs.@location is the actual rule location. If @fs.@flow_type
* includes the %FLOW_RSS flag, @rss_context is the RSS context ID to
* use for flow spreading traffic which matches this rule. The value
* from the rxfh indirection table will be added to @fs.@ring_cookie
* to choose which ring to deliver to.
*
* For %ETHTOOL_SRXCLSRLDEL, @fs.@location specifies the location of an
* existing rule on entry.
*
* A driver supporting the special location values for
* %ETHTOOL_SRXCLSRLINS may add the rule at any suitable unused
* location, and may remove a rule at a later location (lower
* priority) that matches exactly the same set of flows. The special
* values are %RX_CLS_LOC_ANY, selecting any location;
* %RX_CLS_LOC_FIRST, selecting the first suitable location (maximum
* priority); and %RX_CLS_LOC_LAST, selecting the last suitable
* location (minimum priority). Additional special values may be
* defined in future and drivers must return -%EINVAL for any
* unrecognised value.
*/
struct ethtool_rxnfc {
uint32_t cmd;
uint32_t flow_type;
uint64_t data;
struct ethtool_rx_flow_spec fs;
union {
uint32_t rule_cnt;
uint32_t rss_context;
};
uint32_t rule_locs[0];
};
/**
* struct ethtool_rxfh_indir - command to get or set RX flow hash indirection
* @cmd: Specific command number - %ETHTOOL_GRXFHINDIR or %ETHTOOL_SRXFHINDIR
* @size: On entry, the array size of the user buffer, which may be zero.
* On return from %ETHTOOL_GRXFHINDIR, the array size of the hardware
* indirection table.
* @ring_index: RX ring/queue index for each hash value
*
* For %ETHTOOL_GRXFHINDIR, a @size of zero means that only the size
* should be returned. For %ETHTOOL_SRXFHINDIR, a @size of zero means
* the table should be reset to default values. This last feature
* is not supported by the original implementations.
*/
struct ethtool_rxfh_indir {
uint32_t cmd;
uint32_t size;
uint32_t ring_index[0];
};
/**
* struct ethtool_rxfh - command to get/set RX flow hash indir or/and hash key.
* @cmd: Specific command number - %ETHTOOL_GRSSH or %ETHTOOL_SRSSH
* @rss_context: RSS context identifier. Context 0 is the default for normal
* traffic; other contexts can be referenced as the destination for RX flow
* classification rules. %ETH_RXFH_CONTEXT_ALLOC is used with command
* %ETHTOOL_SRSSH to allocate a new RSS context; on return this field will
* contain the ID of the newly allocated context.
* @indir_size: On entry, the array size of the user buffer for the
* indirection table, which may be zero, or (for %ETHTOOL_SRSSH),
* %ETH_RXFH_INDIR_NO_CHANGE. On return from %ETHTOOL_GRSSH,
* the array size of the hardware indirection table.
* @key_size: On entry, the array size of the user buffer for the hash key,
* which may be zero. On return from %ETHTOOL_GRSSH, the size of the
* hardware hash key.
* @hfunc: Defines the current RSS hash function used by HW (or to be set to).
* Valid values are one of the %ETH_RSS_HASH_*.
* @rsvd8: Reserved for future use; see the note on reserved space.
* @rsvd32: Reserved for future use; see the note on reserved space.
* @rss_config: RX ring/queue index for each hash value i.e., indirection table
* of @indir_size uint32_t elements, followed by hash key of @key_size
* bytes.
*
* For %ETHTOOL_GRSSH, a @indir_size and key_size of zero means that only the
* size should be returned. For %ETHTOOL_SRSSH, an @indir_size of
* %ETH_RXFH_INDIR_NO_CHANGE means that indir table setting is not requested
* and a @indir_size of zero means the indir table should be reset to default
* values (if @rss_context == 0) or that the RSS context should be deleted.
* An hfunc of zero means that hash function setting is not requested.
*/
struct ethtool_rxfh {
uint32_t cmd;
uint32_t rss_context;
uint32_t indir_size;
uint32_t key_size;
uint8_t hfunc;
uint8_t rsvd8[3];
uint32_t rsvd32;
uint32_t rss_config[0];
};
#define ETH_RXFH_CONTEXT_ALLOC 0xffffffff
#define ETH_RXFH_INDIR_NO_CHANGE 0xffffffff
/**
* struct ethtool_rx_ntuple_flow_spec - specification for RX flow filter
* @flow_type: Type of match to perform, e.g. %TCP_V4_FLOW
* @h_u: Flow field values to match (dependent on @flow_type)
* @m_u: Masks for flow field value bits to be ignored
* @vlan_tag: VLAN tag to match
* @vlan_tag_mask: Mask for VLAN tag bits to be ignored
* @data: Driver-dependent data to match
* @data_mask: Mask for driver-dependent data bits to be ignored
* @action: RX ring/queue index to deliver to (non-negative) or other action
* (negative, e.g. %ETHTOOL_RXNTUPLE_ACTION_DROP)
*
* For flow types %TCP_V4_FLOW, %UDP_V4_FLOW and %SCTP_V4_FLOW, where
* a field value and mask are both zero this is treated as if all mask
* bits are set i.e. the field is ignored.
*/
struct ethtool_rx_ntuple_flow_spec {
uint32_t flow_type;
union {
struct ethtool_tcpip4_spec tcp_ip4_spec;
struct ethtool_tcpip4_spec udp_ip4_spec;
struct ethtool_tcpip4_spec sctp_ip4_spec;
struct ethtool_ah_espip4_spec ah_ip4_spec;
struct ethtool_ah_espip4_spec esp_ip4_spec;
struct ethtool_usrip4_spec usr_ip4_spec;
struct eth_header ether_spec;
uint8_t hdata[72];
} h_u, m_u;
uint16_t vlan_tag;
uint16_t vlan_tag_mask;
uint64_t data;
uint64_t data_mask;
int32_t action;
#define ETHTOOL_RXNTUPLE_ACTION_DROP (-1) /* drop packet */
#define ETHTOOL_RXNTUPLE_ACTION_CLEAR (-2) /* clear filter */
};
/**
* struct ethtool_rx_ntuple - command to set or clear RX flow filter
* @cmd: Command number - %ETHTOOL_SRXNTUPLE
* @fs: Flow filter specification
*/
struct ethtool_rx_ntuple {
uint32_t cmd;
struct ethtool_rx_ntuple_flow_spec fs;
};
#define ETHTOOL_FLASH_MAX_FILENAME 128
enum ethtool_flash_op_type {
ETHTOOL_FLASH_ALL_REGIONS = 0,
};
/* for passing firmware flashing related parameters */
struct ethtool_flash {
uint32_t cmd;
uint32_t region;
char data[ETHTOOL_FLASH_MAX_FILENAME];
};
/**
* struct ethtool_dump - used for retrieving, setting device dump
* @cmd: Command number - %ETHTOOL_GET_DUMP_FLAG, %ETHTOOL_GET_DUMP_DATA, or
* %ETHTOOL_SET_DUMP
* @version: FW version of the dump, filled in by driver
* @flag: driver dependent flag for dump setting, filled in by driver during
* get and filled in by ethtool for set operation.
* flag must be initialized by macro ETH_FW_DUMP_DISABLE value when
* firmware dump is disabled.
* @len: length of dump data, used as the length of the user buffer on entry to
* %ETHTOOL_GET_DUMP_DATA and this is returned as dump length by driver
* for %ETHTOOL_GET_DUMP_FLAG command
* @data: data collected for get dump data operation
*/
struct ethtool_dump {
uint32_t cmd;
uint32_t version;
uint32_t flag;
uint32_t len;
uint8_t data[0];
};
#define ETH_FW_DUMP_DISABLE 0
/* for returning and changing feature sets */
/**
* struct ethtool_get_features_block - block with state of 32 features
* @available: mask of changeable features
* @requested: mask of features requested to be enabled if possible
* @active: mask of currently enabled features
* @never_changed: mask of features not changeable for any device
*/
struct ethtool_get_features_block {
uint32_t available;
uint32_t requested;
uint32_t active;
uint32_t never_changed;
};
/**
* struct ethtool_gfeatures - command to get state of device's features
* @cmd: command number = %ETHTOOL_GFEATURES
* @size: On entry, the number of elements in the features[] array;
* on return, the number of elements in features[] needed to hold
* all features
* @features: state of features
*/
struct ethtool_gfeatures {
uint32_t cmd;
uint32_t size;
struct ethtool_get_features_block features[0];
};
/**
* struct ethtool_set_features_block - block with request for 32 features
* @valid: mask of features to be changed
* @requested: values of features to be changed
*/
struct ethtool_set_features_block {
uint32_t valid;
uint32_t requested;
};
/**
* struct ethtool_sfeatures - command to request change in device's features
* @cmd: command number = %ETHTOOL_SFEATURES
* @size: array size of the features[] array
* @features: feature change masks
*/
struct ethtool_sfeatures {
uint32_t cmd;
uint32_t size;
struct ethtool_set_features_block features[0];
};
/**
* struct ethtool_ts_info - holds a device's timestamping and PHC association
* @cmd: command number = %ETHTOOL_GET_TS_INFO
* @so_timestamping: bit mask of the sum of the supported SO_TIMESTAMPING flags
* @phc_index: device index of the associated PHC, or -1 if there is none
* @tx_types: bit mask of the supported hwtstamp_tx_types enumeration values
* @tx_reserved: Reserved for future use; see the note on reserved space.
* @rx_filters: bit mask of the supported hwtstamp_rx_filters enumeration values
* @rx_reserved: Reserved for future use; see the note on reserved space.
*
* The bits in the 'tx_types' and 'rx_filters' fields correspond to
* the 'hwtstamp_tx_types' and 'hwtstamp_rx_filters' enumeration values,
* respectively. For example, if the device supports HWTSTAMP_TX_ON,
* then (1 << HWTSTAMP_TX_ON) in 'tx_types' will be set.
*
* Drivers should only report the filters they actually support without
* upscaling in the SIOCSHWTSTAMP ioctl. If the SIOCSHWSTAMP request for
* HWTSTAMP_FILTER_V1_SYNC is supported by HWTSTAMP_FILTER_V1_EVENT, then the
* driver should only report HWTSTAMP_FILTER_V1_EVENT in this op.
*/
struct ethtool_ts_info {
uint32_t cmd;
uint32_t so_timestamping;
int32_t phc_index;
uint32_t tx_types;
uint32_t tx_reserved[3];
uint32_t rx_filters;
uint32_t rx_reserved[3];
};
/*
* %ETHTOOL_SFEATURES changes features present in features[].valid to the
* values of corresponding bits in features[].requested. Bits in .requested
* not set in .valid or not changeable are ignored.
*
* Returns %EINVAL when .valid contains undefined or never-changeable bits
* or size is not equal to required number of features words (32-bit blocks).
* Returns >= 0 if request was completed; bits set in the value mean:
* %ETHTOOL_F_UNSUPPORTED - there were bits set in .valid that are not
* changeable (not present in %ETHTOOL_GFEATURES' features[].available)
* those bits were ignored.
* %ETHTOOL_F_WISH - some or all changes requested were recorded but the
* resulting state of bits masked by .valid is not equal to .requested.
* Probably there are other device-specific constraints on some features
* in the set. When %ETHTOOL_F_UNSUPPORTED is set, .valid is considered
* here as though ignored bits were cleared.
* %ETHTOOL_F_COMPAT - some or all changes requested were made by calling
* compatibility functions. Requested offload state cannot be properly
* managed by kernel.
*
* Meaning of bits in the masks are obtained by %ETHTOOL_GSSET_INFO (number of
* bits in the arrays - always multiple of 32) and %ETHTOOL_GSTRINGS commands
* for ETH_SS_FEATURES string set. First entry in the table corresponds to least
* significant bit in features[0] fields. Empty strings mark undefined features.
*/
enum ethtool_sfeatures_retval_bits {
ETHTOOL_F_UNSUPPORTED__BIT,
ETHTOOL_F_WISH__BIT,
ETHTOOL_F_COMPAT__BIT,
};
#define ETHTOOL_F_UNSUPPORTED (1 << ETHTOOL_F_UNSUPPORTED__BIT)
#define ETHTOOL_F_WISH (1 << ETHTOOL_F_WISH__BIT)
#define ETHTOOL_F_COMPAT (1 << ETHTOOL_F_COMPAT__BIT)
#define MAX_NUM_QUEUE 4096
/**
* struct ethtool_per_queue_op - apply sub command to the queues in mask.
* @cmd: ETHTOOL_PERQUEUE
* @sub_command: the sub command which apply to each queues
* @queue_mask: Bitmap of the queues which sub command apply to
* @data: A complete command structure following for each of the queues addressed
*/
struct ethtool_per_queue_op {
uint32_t cmd;
uint32_t sub_command;
uint32_t queue_mask[__KERNEL_DIV_ROUND_UP(MAX_NUM_QUEUE, 32)];
char data[];
};
/**
* struct ethtool_fecparam - Ethernet Forward Error Correction parameters
* @cmd: Command number = %ETHTOOL_GFECPARAM or %ETHTOOL_SFECPARAM
* @active_fec: FEC mode which is active on the port, single bit set, GET only.
* @fec: Bitmask of configured FEC modes.
* @reserved: Reserved for future extensions, ignore on GET, write 0 for SET.
*
* Note that @reserved was never validated on input and ethtool user space
* left it uninitialized when calling SET. Hence going forward it can only be
* used to return a value to userspace with GET.
*
* FEC modes supported by the device can be read via %ETHTOOL_GLINKSETTINGS.
* FEC settings are configured by link autonegotiation whenever it's enabled.
* With autoneg on %ETHTOOL_GFECPARAM can be used to read the current mode.
*
* When autoneg is disabled %ETHTOOL_SFECPARAM controls the FEC settings.
* It is recommended that drivers only accept a single bit set in @fec.
* When multiple bits are set in @fec drivers may pick mode in an implementation
* dependent way. Drivers should reject mixing %ETHTOOL_FEC_AUTO_BIT with other
* FEC modes, because it's unclear whether in this case other modes constrain
* AUTO or are independent choices.
* Drivers must reject SET requests if they support none of the requested modes.
*
* If device does not support FEC drivers may use %ETHTOOL_FEC_NONE instead
* of returning %EOPNOTSUPP from %ETHTOOL_GFECPARAM.
*
* See enum ethtool_fec_config_bits for definition of valid bits for both
* @fec and @active_fec.
*/
struct ethtool_fecparam {
uint32_t cmd;
/* bitmask of FEC modes */
uint32_t active_fec;
uint32_t fec;
uint32_t reserved;
};
/**
* enum ethtool_fec_config_bits - flags definition of ethtool_fec_configuration
* @ETHTOOL_FEC_NONE_BIT: FEC mode configuration is not supported. Should not
* be used together with other bits. GET only.
* @ETHTOOL_FEC_AUTO_BIT: Select default/best FEC mode automatically, usually
* based link mode and SFP parameters read from module's
* EEPROM. This bit does _not_ mean autonegotiation.
* @ETHTOOL_FEC_OFF_BIT: No FEC Mode
* @ETHTOOL_FEC_RS_BIT: Reed-Solomon FEC Mode
* @ETHTOOL_FEC_BASER_BIT: Base-R/Reed-Solomon FEC Mode
* @ETHTOOL_FEC_LLRS_BIT: Low Latency Reed Solomon FEC Mode (25G/50G Ethernet
* Consortium)
*/
enum ethtool_fec_config_bits {
ETHTOOL_FEC_NONE_BIT,
ETHTOOL_FEC_AUTO_BIT,
ETHTOOL_FEC_OFF_BIT,
ETHTOOL_FEC_RS_BIT,
ETHTOOL_FEC_BASER_BIT,
ETHTOOL_FEC_LLRS_BIT,
};
#define ETHTOOL_FEC_NONE (1 << ETHTOOL_FEC_NONE_BIT)
#define ETHTOOL_FEC_AUTO (1 << ETHTOOL_FEC_AUTO_BIT)
#define ETHTOOL_FEC_OFF (1 << ETHTOOL_FEC_OFF_BIT)
#define ETHTOOL_FEC_RS (1 << ETHTOOL_FEC_RS_BIT)
#define ETHTOOL_FEC_BASER (1 << ETHTOOL_FEC_BASER_BIT)
#define ETHTOOL_FEC_LLRS (1 << ETHTOOL_FEC_LLRS_BIT)
/* CMDs currently supported */
#define ETHTOOL_GSET 0x00000001 /* DEPRECATED, Get settings.
* Please use ETHTOOL_GLINKSETTINGS
*/
#define ETHTOOL_SSET 0x00000002 /* DEPRECATED, Set settings.
* Please use ETHTOOL_SLINKSETTINGS
*/
#define ETHTOOL_GDRVINFO 0x00000003 /* Get driver info. */
#define ETHTOOL_GREGS 0x00000004 /* Get NIC registers. */
#define ETHTOOL_GWOL 0x00000005 /* Get wake-on-lan options. */
#define ETHTOOL_SWOL 0x00000006 /* Set wake-on-lan options. */
#define ETHTOOL_GMSGLVL 0x00000007 /* Get driver message level */
#define ETHTOOL_SMSGLVL 0x00000008 /* Set driver msg level. */
#define ETHTOOL_NWAY_RST 0x00000009 /* Restart autonegotiation. */
/* Get link status for host, i.e. whether the interface *and* the
* physical port (if there is one) are up (ethtool_value). */
#define ETHTOOL_GLINK 0x0000000a
#define ETHTOOL_GEEPROM 0x0000000b /* Get EEPROM data */
#define ETHTOOL_SEEPROM 0x0000000c /* Set EEPROM data. */
#define ETHTOOL_GCOALESCE 0x0000000e /* Get coalesce config */
#define ETHTOOL_SCOALESCE 0x0000000f /* Set coalesce config. */
#define ETHTOOL_GRINGPARAM 0x00000010 /* Get ring parameters */
#define ETHTOOL_SRINGPARAM 0x00000011 /* Set ring parameters. */
#define ETHTOOL_GPAUSEPARAM 0x00000012 /* Get pause parameters */
#define ETHTOOL_SPAUSEPARAM 0x00000013 /* Set pause parameters. */
#define ETHTOOL_GRXCSUM 0x00000014 /* Get RX hw csum enable (ethtool_value) */
#define ETHTOOL_SRXCSUM 0x00000015 /* Set RX hw csum enable (ethtool_value) */
#define ETHTOOL_GTXCSUM 0x00000016 /* Get TX hw csum enable (ethtool_value) */
#define ETHTOOL_STXCSUM 0x00000017 /* Set TX hw csum enable (ethtool_value) */
#define ETHTOOL_GSG 0x00000018 /* Get scatter-gather enable
* (ethtool_value) */
#define ETHTOOL_SSG 0x00000019 /* Set scatter-gather enable
* (ethtool_value). */
#define ETHTOOL_TEST 0x0000001a /* execute NIC self-test. */
#define ETHTOOL_GSTRINGS 0x0000001b /* get specified string set */
#define ETHTOOL_PHYS_ID 0x0000001c /* identify the NIC */
#define ETHTOOL_GSTATS 0x0000001d /* get NIC-specific statistics */
#define ETHTOOL_GTSO 0x0000001e /* Get TSO enable (ethtool_value) */
#define ETHTOOL_STSO 0x0000001f /* Set TSO enable (ethtool_value) */
#define ETHTOOL_GPERMADDR 0x00000020 /* Get permanent hardware address */
#define ETHTOOL_GUFO 0x00000021 /* Get UFO enable (ethtool_value) */
#define ETHTOOL_SUFO 0x00000022 /* Set UFO enable (ethtool_value) */
#define ETHTOOL_GGSO 0x00000023 /* Get GSO enable (ethtool_value) */
#define ETHTOOL_SGSO 0x00000024 /* Set GSO enable (ethtool_value) */
#define ETHTOOL_GFLAGS 0x00000025 /* Get flags bitmap(ethtool_value) */
#define ETHTOOL_SFLAGS 0x00000026 /* Set flags bitmap(ethtool_value) */
#define ETHTOOL_GPFLAGS 0x00000027 /* Get driver-private flags bitmap */
#define ETHTOOL_SPFLAGS 0x00000028 /* Set driver-private flags bitmap */
#define ETHTOOL_GRXFH 0x00000029 /* Get RX flow hash configuration */
#define ETHTOOL_SRXFH 0x0000002a /* Set RX flow hash configuration */
#define ETHTOOL_GGRO 0x0000002b /* Get GRO enable (ethtool_value) */
#define ETHTOOL_SGRO 0x0000002c /* Set GRO enable (ethtool_value) */
#define ETHTOOL_GRXRINGS 0x0000002d /* Get RX rings available for LB */
#define ETHTOOL_GRXCLSRLCNT 0x0000002e /* Get RX class rule count */
#define ETHTOOL_GRXCLSRULE 0x0000002f /* Get RX classification rule */
#define ETHTOOL_GRXCLSRLALL 0x00000030 /* Get all RX classification rule */
#define ETHTOOL_SRXCLSRLDEL 0x00000031 /* Delete RX classification rule */
#define ETHTOOL_SRXCLSRLINS 0x00000032 /* Insert RX classification rule */
#define ETHTOOL_FLASHDEV 0x00000033 /* Flash firmware to device */
#define ETHTOOL_RESET 0x00000034 /* Reset hardware */
#define ETHTOOL_SRXNTUPLE 0x00000035 /* Add an n-tuple filter to device */
#define ETHTOOL_GRXNTUPLE 0x00000036 /* deprecated */
#define ETHTOOL_GSSET_INFO 0x00000037 /* Get string set info */
#define ETHTOOL_GRXFHINDIR 0x00000038 /* Get RX flow hash indir'n table */
#define ETHTOOL_SRXFHINDIR 0x00000039 /* Set RX flow hash indir'n table */
#define ETHTOOL_GFEATURES 0x0000003a /* Get device offload settings */
#define ETHTOOL_SFEATURES 0x0000003b /* Change device offload settings */
#define ETHTOOL_GCHANNELS 0x0000003c /* Get no of channels */
#define ETHTOOL_SCHANNELS 0x0000003d /* Set no of channels */
#define ETHTOOL_SET_DUMP 0x0000003e /* Set dump settings */
#define ETHTOOL_GET_DUMP_FLAG 0x0000003f /* Get dump settings */
#define ETHTOOL_GET_DUMP_DATA 0x00000040 /* Get dump data */
#define ETHTOOL_GET_TS_INFO 0x00000041 /* Get time stamping and PHC info */
#define ETHTOOL_GMODULEINFO 0x00000042 /* Get plug-in module information */
#define ETHTOOL_GMODULEEEPROM 0x00000043 /* Get plug-in module eeprom */
#define ETHTOOL_GEEE 0x00000044 /* Get EEE settings */
#define ETHTOOL_SEEE 0x00000045 /* Set EEE settings */
#define ETHTOOL_GRSSH 0x00000046 /* Get RX flow hash configuration */
#define ETHTOOL_SRSSH 0x00000047 /* Set RX flow hash configuration */
#define ETHTOOL_GTUNABLE 0x00000048 /* Get tunable configuration */
#define ETHTOOL_STUNABLE 0x00000049 /* Set tunable configuration */
#define ETHTOOL_GPHYSTATS 0x0000004a /* get PHY-specific statistics */
#define ETHTOOL_PERQUEUE 0x0000004b /* Set per queue options */
#define ETHTOOL_GLINKSETTINGS 0x0000004c /* Get ethtool_link_settings */
#define ETHTOOL_SLINKSETTINGS 0x0000004d /* Set ethtool_link_settings */
#define ETHTOOL_PHY_GTUNABLE 0x0000004e /* Get PHY tunable configuration */
#define ETHTOOL_PHY_STUNABLE 0x0000004f /* Set PHY tunable configuration */
#define ETHTOOL_GFECPARAM 0x00000050 /* Get FEC settings */
#define ETHTOOL_SFECPARAM 0x00000051 /* Set FEC settings */
/* compatibility with older code */
#define SPARC_ETH_GSET ETHTOOL_GSET
#define SPARC_ETH_SSET ETHTOOL_SSET
/* Link mode bit indices */
enum ethtool_link_mode_bit_indices {
ETHTOOL_LINK_MODE_10baseT_Half_BIT = 0,
ETHTOOL_LINK_MODE_10baseT_Full_BIT = 1,
ETHTOOL_LINK_MODE_100baseT_Half_BIT = 2,
ETHTOOL_LINK_MODE_100baseT_Full_BIT = 3,
ETHTOOL_LINK_MODE_1000baseT_Half_BIT = 4,
ETHTOOL_LINK_MODE_1000baseT_Full_BIT = 5,
ETHTOOL_LINK_MODE_Autoneg_BIT = 6,
ETHTOOL_LINK_MODE_TP_BIT = 7,
ETHTOOL_LINK_MODE_AUI_BIT = 8,
ETHTOOL_LINK_MODE_MII_BIT = 9,
ETHTOOL_LINK_MODE_FIBRE_BIT = 10,
ETHTOOL_LINK_MODE_BNC_BIT = 11,
ETHTOOL_LINK_MODE_10000baseT_Full_BIT = 12,
ETHTOOL_LINK_MODE_Pause_BIT = 13,
ETHTOOL_LINK_MODE_Asym_Pause_BIT = 14,
ETHTOOL_LINK_MODE_2500baseX_Full_BIT = 15,
ETHTOOL_LINK_MODE_Backplane_BIT = 16,
ETHTOOL_LINK_MODE_1000baseKX_Full_BIT = 17,
ETHTOOL_LINK_MODE_10000baseKX4_Full_BIT = 18,
ETHTOOL_LINK_MODE_10000baseKR_Full_BIT = 19,
ETHTOOL_LINK_MODE_10000baseR_FEC_BIT = 20,
ETHTOOL_LINK_MODE_20000baseMLD2_Full_BIT = 21,
ETHTOOL_LINK_MODE_20000baseKR2_Full_BIT = 22,
ETHTOOL_LINK_MODE_40000baseKR4_Full_BIT = 23,
ETHTOOL_LINK_MODE_40000baseCR4_Full_BIT = 24,
ETHTOOL_LINK_MODE_40000baseSR4_Full_BIT = 25,
ETHTOOL_LINK_MODE_40000baseLR4_Full_BIT = 26,
ETHTOOL_LINK_MODE_56000baseKR4_Full_BIT = 27,
ETHTOOL_LINK_MODE_56000baseCR4_Full_BIT = 28,
ETHTOOL_LINK_MODE_56000baseSR4_Full_BIT = 29,
ETHTOOL_LINK_MODE_56000baseLR4_Full_BIT = 30,
ETHTOOL_LINK_MODE_25000baseCR_Full_BIT = 31,
/* Last allowed bit for __ETHTOOL_LINK_MODE_LEGACY_MASK is bit
* 31. Please do NOT define any SUPPORTED_* or ADVERTISED_*
* macro for bits > 31. The only way to use indices > 31 is to
* use the new ETHTOOL_GLINKSETTINGS/ETHTOOL_SLINKSETTINGS API.
*/
ETHTOOL_LINK_MODE_25000baseKR_Full_BIT = 32,
ETHTOOL_LINK_MODE_25000baseSR_Full_BIT = 33,
ETHTOOL_LINK_MODE_50000baseCR2_Full_BIT = 34,
ETHTOOL_LINK_MODE_50000baseKR2_Full_BIT = 35,
ETHTOOL_LINK_MODE_100000baseKR4_Full_BIT = 36,
ETHTOOL_LINK_MODE_100000baseSR4_Full_BIT = 37,
ETHTOOL_LINK_MODE_100000baseCR4_Full_BIT = 38,
ETHTOOL_LINK_MODE_100000baseLR4_ER4_Full_BIT = 39,
ETHTOOL_LINK_MODE_50000baseSR2_Full_BIT = 40,
ETHTOOL_LINK_MODE_1000baseX_Full_BIT = 41,
ETHTOOL_LINK_MODE_10000baseCR_Full_BIT = 42,
ETHTOOL_LINK_MODE_10000baseSR_Full_BIT = 43,
ETHTOOL_LINK_MODE_10000baseLR_Full_BIT = 44,
ETHTOOL_LINK_MODE_10000baseLRM_Full_BIT = 45,
ETHTOOL_LINK_MODE_10000baseER_Full_BIT = 46,
ETHTOOL_LINK_MODE_2500baseT_Full_BIT = 47,
ETHTOOL_LINK_MODE_5000baseT_Full_BIT = 48,
ETHTOOL_LINK_MODE_FEC_NONE_BIT = 49,
ETHTOOL_LINK_MODE_FEC_RS_BIT = 50,
ETHTOOL_LINK_MODE_FEC_BASER_BIT = 51,
ETHTOOL_LINK_MODE_50000baseKR_Full_BIT = 52,
ETHTOOL_LINK_MODE_50000baseSR_Full_BIT = 53,
ETHTOOL_LINK_MODE_50000baseCR_Full_BIT = 54,
ETHTOOL_LINK_MODE_50000baseLR_ER_FR_Full_BIT = 55,
ETHTOOL_LINK_MODE_50000baseDR_Full_BIT = 56,
ETHTOOL_LINK_MODE_100000baseKR2_Full_BIT = 57,
ETHTOOL_LINK_MODE_100000baseSR2_Full_BIT = 58,
ETHTOOL_LINK_MODE_100000baseCR2_Full_BIT = 59,
ETHTOOL_LINK_MODE_100000baseLR2_ER2_FR2_Full_BIT = 60,
ETHTOOL_LINK_MODE_100000baseDR2_Full_BIT = 61,
ETHTOOL_LINK_MODE_200000baseKR4_Full_BIT = 62,
ETHTOOL_LINK_MODE_200000baseSR4_Full_BIT = 63,
ETHTOOL_LINK_MODE_200000baseLR4_ER4_FR4_Full_BIT = 64,
ETHTOOL_LINK_MODE_200000baseDR4_Full_BIT = 65,
ETHTOOL_LINK_MODE_200000baseCR4_Full_BIT = 66,
ETHTOOL_LINK_MODE_100baseT1_Full_BIT = 67,
ETHTOOL_LINK_MODE_1000baseT1_Full_BIT = 68,
ETHTOOL_LINK_MODE_400000baseKR8_Full_BIT = 69,
ETHTOOL_LINK_MODE_400000baseSR8_Full_BIT = 70,
ETHTOOL_LINK_MODE_400000baseLR8_ER8_FR8_Full_BIT = 71,
ETHTOOL_LINK_MODE_400000baseDR8_Full_BIT = 72,
ETHTOOL_LINK_MODE_400000baseCR8_Full_BIT = 73,
ETHTOOL_LINK_MODE_FEC_LLRS_BIT = 74,
ETHTOOL_LINK_MODE_100000baseKR_Full_BIT = 75,
ETHTOOL_LINK_MODE_100000baseSR_Full_BIT = 76,
ETHTOOL_LINK_MODE_100000baseLR_ER_FR_Full_BIT = 77,
ETHTOOL_LINK_MODE_100000baseCR_Full_BIT = 78,
ETHTOOL_LINK_MODE_100000baseDR_Full_BIT = 79,
ETHTOOL_LINK_MODE_200000baseKR2_Full_BIT = 80,
ETHTOOL_LINK_MODE_200000baseSR2_Full_BIT = 81,
ETHTOOL_LINK_MODE_200000baseLR2_ER2_FR2_Full_BIT = 82,
ETHTOOL_LINK_MODE_200000baseDR2_Full_BIT = 83,
ETHTOOL_LINK_MODE_200000baseCR2_Full_BIT = 84,
ETHTOOL_LINK_MODE_400000baseKR4_Full_BIT = 85,
ETHTOOL_LINK_MODE_400000baseSR4_Full_BIT = 86,
ETHTOOL_LINK_MODE_400000baseLR4_ER4_FR4_Full_BIT = 87,
ETHTOOL_LINK_MODE_400000baseDR4_Full_BIT = 88,
ETHTOOL_LINK_MODE_400000baseCR4_Full_BIT = 89,
ETHTOOL_LINK_MODE_100baseFX_Half_BIT = 90,
ETHTOOL_LINK_MODE_100baseFX_Full_BIT = 91,
/* must be last entry */
__ETHTOOL_LINK_MODE_MASK_NBITS
};
#define __ETHTOOL_LINK_MODE_LEGACY_MASK(base_name) \
(1UL << (ETHTOOL_LINK_MODE_ ## base_name ## _BIT))
/* DEPRECATED macros. Please migrate to
* ETHTOOL_GLINKSETTINGS/ETHTOOL_SLINKSETTINGS API. Please do NOT
* define any new SUPPORTED_* macro for bits > 31.
*/
#define SUPPORTED_10baseT_Half __ETHTOOL_LINK_MODE_LEGACY_MASK(10baseT_Half)
#define SUPPORTED_10baseT_Full __ETHTOOL_LINK_MODE_LEGACY_MASK(10baseT_Full)
#define SUPPORTED_100baseT_Half __ETHTOOL_LINK_MODE_LEGACY_MASK(100baseT_Half)
#define SUPPORTED_100baseT_Full __ETHTOOL_LINK_MODE_LEGACY_MASK(100baseT_Full)
#define SUPPORTED_1000baseT_Half __ETHTOOL_LINK_MODE_LEGACY_MASK(1000baseT_Half)
#define SUPPORTED_1000baseT_Full __ETHTOOL_LINK_MODE_LEGACY_MASK(1000baseT_Full)
#define SUPPORTED_Autoneg __ETHTOOL_LINK_MODE_LEGACY_MASK(Autoneg)
#define SUPPORTED_TP __ETHTOOL_LINK_MODE_LEGACY_MASK(TP)
#define SUPPORTED_AUI __ETHTOOL_LINK_MODE_LEGACY_MASK(AUI)
#define SUPPORTED_MII __ETHTOOL_LINK_MODE_LEGACY_MASK(MII)
#define SUPPORTED_FIBRE __ETHTOOL_LINK_MODE_LEGACY_MASK(FIBRE)
#define SUPPORTED_BNC __ETHTOOL_LINK_MODE_LEGACY_MASK(BNC)
#define SUPPORTED_10000baseT_Full __ETHTOOL_LINK_MODE_LEGACY_MASK(10000baseT_Full)
#define SUPPORTED_Pause __ETHTOOL_LINK_MODE_LEGACY_MASK(Pause)
#define SUPPORTED_Asym_Pause __ETHTOOL_LINK_MODE_LEGACY_MASK(Asym_Pause)
#define SUPPORTED_2500baseX_Full __ETHTOOL_LINK_MODE_LEGACY_MASK(2500baseX_Full)
#define SUPPORTED_Backplane __ETHTOOL_LINK_MODE_LEGACY_MASK(Backplane)
#define SUPPORTED_1000baseKX_Full __ETHTOOL_LINK_MODE_LEGACY_MASK(1000baseKX_Full)
#define SUPPORTED_10000baseKX4_Full __ETHTOOL_LINK_MODE_LEGACY_MASK(10000baseKX4_Full)
#define SUPPORTED_10000baseKR_Full __ETHTOOL_LINK_MODE_LEGACY_MASK(10000baseKR_Full)
#define SUPPORTED_10000baseR_FEC __ETHTOOL_LINK_MODE_LEGACY_MASK(10000baseR_FEC)
#define SUPPORTED_20000baseMLD2_Full __ETHTOOL_LINK_MODE_LEGACY_MASK(20000baseMLD2_Full)
#define SUPPORTED_20000baseKR2_Full __ETHTOOL_LINK_MODE_LEGACY_MASK(20000baseKR2_Full)
#define SUPPORTED_40000baseKR4_Full __ETHTOOL_LINK_MODE_LEGACY_MASK(40000baseKR4_Full)
#define SUPPORTED_40000baseCR4_Full __ETHTOOL_LINK_MODE_LEGACY_MASK(40000baseCR4_Full)
#define SUPPORTED_40000baseSR4_Full __ETHTOOL_LINK_MODE_LEGACY_MASK(40000baseSR4_Full)
#define SUPPORTED_40000baseLR4_Full __ETHTOOL_LINK_MODE_LEGACY_MASK(40000baseLR4_Full)
#define SUPPORTED_56000baseKR4_Full __ETHTOOL_LINK_MODE_LEGACY_MASK(56000baseKR4_Full)
#define SUPPORTED_56000baseCR4_Full __ETHTOOL_LINK_MODE_LEGACY_MASK(56000baseCR4_Full)
#define SUPPORTED_56000baseSR4_Full __ETHTOOL_LINK_MODE_LEGACY_MASK(56000baseSR4_Full)
#define SUPPORTED_56000baseLR4_Full __ETHTOOL_LINK_MODE_LEGACY_MASK(56000baseLR4_Full)
/* Please do not define any new SUPPORTED_* macro for bits > 31, see
* notice above.
*/
/*
* DEPRECATED macros. Please migrate to
* ETHTOOL_GLINKSETTINGS/ETHTOOL_SLINKSETTINGS API. Please do NOT
* define any new ADERTISE_* macro for bits > 31.
*/
#define ADVERTISED_10baseT_Half __ETHTOOL_LINK_MODE_LEGACY_MASK(10baseT_Half)
#define ADVERTISED_10baseT_Full __ETHTOOL_LINK_MODE_LEGACY_MASK(10baseT_Full)
#define ADVERTISED_100baseT_Half __ETHTOOL_LINK_MODE_LEGACY_MASK(100baseT_Half)
#define ADVERTISED_100baseT_Full __ETHTOOL_LINK_MODE_LEGACY_MASK(100baseT_Full)
#define ADVERTISED_1000baseT_Half __ETHTOOL_LINK_MODE_LEGACY_MASK(1000baseT_Half)
#define ADVERTISED_1000baseT_Full __ETHTOOL_LINK_MODE_LEGACY_MASK(1000baseT_Full)
#define ADVERTISED_Autoneg __ETHTOOL_LINK_MODE_LEGACY_MASK(Autoneg)
#define ADVERTISED_TP __ETHTOOL_LINK_MODE_LEGACY_MASK(TP)
#define ADVERTISED_AUI __ETHTOOL_LINK_MODE_LEGACY_MASK(AUI)
#define ADVERTISED_MII __ETHTOOL_LINK_MODE_LEGACY_MASK(MII)
#define ADVERTISED_FIBRE __ETHTOOL_LINK_MODE_LEGACY_MASK(FIBRE)
#define ADVERTISED_BNC __ETHTOOL_LINK_MODE_LEGACY_MASK(BNC)
#define ADVERTISED_10000baseT_Full __ETHTOOL_LINK_MODE_LEGACY_MASK(10000baseT_Full)
#define ADVERTISED_Pause __ETHTOOL_LINK_MODE_LEGACY_MASK(Pause)
#define ADVERTISED_Asym_Pause __ETHTOOL_LINK_MODE_LEGACY_MASK(Asym_Pause)
#define ADVERTISED_2500baseX_Full __ETHTOOL_LINK_MODE_LEGACY_MASK(2500baseX_Full)
#define ADVERTISED_Backplane __ETHTOOL_LINK_MODE_LEGACY_MASK(Backplane)
#define ADVERTISED_1000baseKX_Full __ETHTOOL_LINK_MODE_LEGACY_MASK(1000baseKX_Full)
#define ADVERTISED_10000baseKX4_Full __ETHTOOL_LINK_MODE_LEGACY_MASK(10000baseKX4_Full)
#define ADVERTISED_10000baseKR_Full __ETHTOOL_LINK_MODE_LEGACY_MASK(10000baseKR_Full)
#define ADVERTISED_10000baseR_FEC __ETHTOOL_LINK_MODE_LEGACY_MASK(10000baseR_FEC)
#define ADVERTISED_20000baseMLD2_Full __ETHTOOL_LINK_MODE_LEGACY_MASK(20000baseMLD2_Full)
#define ADVERTISED_20000baseKR2_Full __ETHTOOL_LINK_MODE_LEGACY_MASK(20000baseKR2_Full)
#define ADVERTISED_40000baseKR4_Full __ETHTOOL_LINK_MODE_LEGACY_MASK(40000baseKR4_Full)
#define ADVERTISED_40000baseCR4_Full __ETHTOOL_LINK_MODE_LEGACY_MASK(40000baseCR4_Full)
#define ADVERTISED_40000baseSR4_Full __ETHTOOL_LINK_MODE_LEGACY_MASK(40000baseSR4_Full)
#define ADVERTISED_40000baseLR4_Full __ETHTOOL_LINK_MODE_LEGACY_MASK(40000baseLR4_Full)
#define ADVERTISED_56000baseKR4_Full __ETHTOOL_LINK_MODE_LEGACY_MASK(56000baseKR4_Full)
#define ADVERTISED_56000baseCR4_Full __ETHTOOL_LINK_MODE_LEGACY_MASK(56000baseCR4_Full)
#define ADVERTISED_56000baseSR4_Full __ETHTOOL_LINK_MODE_LEGACY_MASK(56000baseSR4_Full)
#define ADVERTISED_56000baseLR4_Full __ETHTOOL_LINK_MODE_LEGACY_MASK(56000baseLR4_Full)
/* Please do not define any new ADVERTISED_* macro for bits > 31, see
* notice above.
*/
/* The following are all involved in forcing a particular link
* mode for the device for setting things. When getting the
* devices settings, these indicate the current mode and whether
* it was forced up into this mode or autonegotiated.
*/
/* The forced speed, in units of 1Mb. All values 0 to INT_MAX are legal.
* Update drivers/net/phy/phy.c:phy_speed_to_str() and
* drivers/net/bonding/bond_3ad.c:__get_link_speed() when adding new values.
*/
#define SPEED_10 10
#define SPEED_100 100
#define SPEED_1000 1000
#define SPEED_2500 2500
#define SPEED_5000 5000
#define SPEED_10000 10000
#define SPEED_14000 14000
#define SPEED_20000 20000
#define SPEED_25000 25000
#define SPEED_40000 40000
#define SPEED_50000 50000
#define SPEED_56000 56000
#define SPEED_100000 100000
#define SPEED_200000 200000
#define SPEED_400000 400000
#define SPEED_UNKNOWN -1
static inline int ethtool_validate_speed(uint32_t speed)
{
return speed <= INT_MAX || speed == (uint32_t)SPEED_UNKNOWN;
}
/* Duplex, half or full. */
#define DUPLEX_HALF 0x00
#define DUPLEX_FULL 0x01
#define DUPLEX_UNKNOWN 0xff
static inline int ethtool_validate_duplex(uint8_t duplex)
{
switch (duplex) {
case DUPLEX_HALF:
case DUPLEX_FULL:
case DUPLEX_UNKNOWN:
return 1;
}
return 0;
}
#define MASTER_SLAVE_CFG_UNSUPPORTED 0
#define MASTER_SLAVE_CFG_UNKNOWN 1
#define MASTER_SLAVE_CFG_MASTER_PREFERRED 2
#define MASTER_SLAVE_CFG_SLAVE_PREFERRED 3
#define MASTER_SLAVE_CFG_MASTER_FORCE 4
#define MASTER_SLAVE_CFG_SLAVE_FORCE 5
#define MASTER_SLAVE_STATE_UNSUPPORTED 0
#define MASTER_SLAVE_STATE_UNKNOWN 1
#define MASTER_SLAVE_STATE_MASTER 2
#define MASTER_SLAVE_STATE_SLAVE 3
#define MASTER_SLAVE_STATE_ERR 4
/* Which connector port. */
#define PORT_TP 0x00
#define PORT_AUI 0x01
#define PORT_MII 0x02
#define PORT_FIBRE 0x03
#define PORT_BNC 0x04
#define PORT_DA 0x05
#define PORT_NONE 0xef
#define PORT_OTHER 0xff
/* Which transceiver to use. */
#define XCVR_INTERNAL 0x00 /* PHY and MAC are in the same package */
#define XCVR_EXTERNAL 0x01 /* PHY and MAC are in different packages */
#define XCVR_DUMMY1 0x02
#define XCVR_DUMMY2 0x03
#define XCVR_DUMMY3 0x04
/* Enable or disable autonegotiation. */
#define AUTONEG_DISABLE 0x00
#define AUTONEG_ENABLE 0x01
/* MDI or MDI-X status/control - if MDI/MDI_X/AUTO is set then
* the driver is required to renegotiate link
*/
#define ETH_TP_MDI_INVALID 0x00 /* status: unknown; control: unsupported */
#define ETH_TP_MDI 0x01 /* status: MDI; control: force MDI */
#define ETH_TP_MDI_X 0x02 /* status: MDI-X; control: force MDI-X */
#define ETH_TP_MDI_AUTO 0x03 /* control: auto-select */
/* Wake-On-Lan options. */
#define WAKE_PHY (1 << 0)
#define WAKE_UCAST (1 << 1)
#define WAKE_MCAST (1 << 2)
#define WAKE_BCAST (1 << 3)
#define WAKE_ARP (1 << 4)
#define WAKE_MAGIC (1 << 5)
#define WAKE_MAGICSECURE (1 << 6) /* only meaningful if WAKE_MAGIC */
#define WAKE_FILTER (1 << 7)
#define WOL_MODE_COUNT 8
/* L2-L4 network traffic flow types */
#define TCP_V4_FLOW 0x01 /* hash or spec (tcp_ip4_spec) */
#define UDP_V4_FLOW 0x02 /* hash or spec (udp_ip4_spec) */
#define SCTP_V4_FLOW 0x03 /* hash or spec (sctp_ip4_spec) */
#define AH_ESP_V4_FLOW 0x04 /* hash only */
#define TCP_V6_FLOW 0x05 /* hash or spec (tcp_ip6_spec; nfc only) */
#define UDP_V6_FLOW 0x06 /* hash or spec (udp_ip6_spec; nfc only) */
#define SCTP_V6_FLOW 0x07 /* hash or spec (sctp_ip6_spec; nfc only) */
#define AH_ESP_V6_FLOW 0x08 /* hash only */
#define AH_V4_FLOW 0x09 /* hash or spec (ah_ip4_spec) */
#define ESP_V4_FLOW 0x0a /* hash or spec (esp_ip4_spec) */
#define AH_V6_FLOW 0x0b /* hash or spec (ah_ip6_spec; nfc only) */
#define ESP_V6_FLOW 0x0c /* hash or spec (esp_ip6_spec; nfc only) */
#define IPV4_USER_FLOW 0x0d /* spec only (usr_ip4_spec) */
#define IP_USER_FLOW IPV4_USER_FLOW
#define IPV6_USER_FLOW 0x0e /* spec only (usr_ip6_spec; nfc only) */
#define IPV4_FLOW 0x10 /* hash only */
#define IPV6_FLOW 0x11 /* hash only */
#define ETHER_FLOW 0x12 /* spec only (ether_spec) */
/* Flag to enable additional fields in struct ethtool_rx_flow_spec */
#define FLOW_EXT 0x80000000
#define FLOW_MAC_EXT 0x40000000
/* Flag to enable RSS spreading of traffic matching rule (nfc only) */
#define FLOW_RSS 0x20000000
/* L3-L4 network traffic flow hash options */
#define RXH_L2DA (1 << 1)
#define RXH_VLAN (1 << 2)
#define RXH_L3_PROTO (1 << 3)
#define RXH_IP_SRC (1 << 4)
#define RXH_IP_DST (1 << 5)
#define RXH_L4_B_0_1 (1 << 6) /* src port in case of TCP/UDP/SCTP */
#define RXH_L4_B_2_3 (1 << 7) /* dst port in case of TCP/UDP/SCTP */
#define RXH_DISCARD (1 << 31)
#define RX_CLS_FLOW_DISC 0xffffffffffffffffULL
#define RX_CLS_FLOW_WAKE 0xfffffffffffffffeULL
/* Special RX classification rule insert location values */
#define RX_CLS_LOC_SPECIAL 0x80000000 /* flag */
#define RX_CLS_LOC_ANY 0xffffffff
#define RX_CLS_LOC_FIRST 0xfffffffe
#define RX_CLS_LOC_LAST 0xfffffffd
/* EEPROM Standards for plug in modules */
#define ETH_MODULE_SFF_8079 0x1
#define ETH_MODULE_SFF_8079_LEN 256
#define ETH_MODULE_SFF_8472 0x2
#define ETH_MODULE_SFF_8472_LEN 512
#define ETH_MODULE_SFF_8636 0x3
#define ETH_MODULE_SFF_8636_LEN 256
#define ETH_MODULE_SFF_8436 0x4
#define ETH_MODULE_SFF_8436_LEN 256
#define ETH_MODULE_SFF_8636_MAX_LEN 640
#define ETH_MODULE_SFF_8436_MAX_LEN 640
/* Reset flags */
/* The reset() operation must clear the flags for the components which
* were actually reset. On successful return, the flags indicate the
* components which were not reset, either because they do not exist
* in the hardware or because they cannot be reset independently. The
* driver must never reset any components that were not requested.
*/
enum ethtool_reset_flags {
/* These flags represent components dedicated to the interface
* the command is addressed to. Shift any flag left by
* ETH_RESET_SHARED_SHIFT to reset a shared component of the
* same type.
*/
ETH_RESET_MGMT = 1 << 0, /* Management processor */
ETH_RESET_IRQ = 1 << 1, /* Interrupt requester */
ETH_RESET_DMA = 1 << 2, /* DMA engine */
ETH_RESET_FILTER = 1 << 3, /* Filtering/flow direction */
ETH_RESET_OFFLOAD = 1 << 4, /* Protocol offload */
ETH_RESET_MAC = 1 << 5, /* Media access controller */
ETH_RESET_PHY = 1 << 6, /* Transceiver/PHY */
ETH_RESET_RAM = 1 << 7, /* RAM shared between
* multiple components */
ETH_RESET_AP = 1 << 8, /* Application processor */
ETH_RESET_DEDICATED = 0x0000ffff, /* All components dedicated to
* this interface */
ETH_RESET_ALL = 0xffffffff, /* All components used by this
* interface, even if shared */
};
#define ETH_RESET_SHARED_SHIFT 16
/**
* struct ethtool_link_settings - link control and status
*
* IMPORTANT, Backward compatibility notice: When implementing new
* user-space tools, please first try %ETHTOOL_GLINKSETTINGS, and
* if it succeeds use %ETHTOOL_SLINKSETTINGS to change link
* settings; do not use %ETHTOOL_SSET if %ETHTOOL_GLINKSETTINGS
* succeeded: stick to %ETHTOOL_GLINKSETTINGS/%SLINKSETTINGS in
* that case. Conversely, if %ETHTOOL_GLINKSETTINGS fails, use
* %ETHTOOL_GSET to query and %ETHTOOL_SSET to change link
* settings; do not use %ETHTOOL_SLINKSETTINGS if
* %ETHTOOL_GLINKSETTINGS failed: stick to
* %ETHTOOL_GSET/%ETHTOOL_SSET in that case.
*
* @cmd: Command number = %ETHTOOL_GLINKSETTINGS or %ETHTOOL_SLINKSETTINGS
* @speed: Link speed (Mbps)
* @duplex: Duplex mode; one of %DUPLEX_*
* @port: Physical connector type; one of %PORT_*
* @phy_address: MDIO address of PHY (transceiver); 0 or 255 if not
* applicable. For clause 45 PHYs this is the PRTAD.
* @autoneg: Enable/disable autonegotiation and auto-detection;
* either %AUTONEG_DISABLE or %AUTONEG_ENABLE
* @mdio_support: Bitmask of %ETH_MDIO_SUPPORTS_* flags for the MDIO
* protocols supported by the interface; 0 if unknown.
* Read-only.
* @eth_tp_mdix: Ethernet twisted-pair MDI(-X) status; one of
* %ETH_TP_MDI_*. If the status is unknown or not applicable, the
* value will be %ETH_TP_MDI_INVALID. Read-only.
* @eth_tp_mdix_ctrl: Ethernet twisted pair MDI(-X) control; one of
* %ETH_TP_MDI_*. If MDI(-X) control is not implemented, reads
* yield %ETH_TP_MDI_INVALID and writes may be ignored or rejected.
* When written successfully, the link should be renegotiated if
* necessary.
* @link_mode_masks_nwords: Number of 32-bit words for each of the
* supported, advertising, lp_advertising link mode bitmaps. For
* %ETHTOOL_GLINKSETTINGS: on entry, number of words passed by user
* (>= 0); on return, if handshake in progress, negative if
* request size unsupported by kernel: absolute value indicates
* kernel expected size and all the other fields but cmd
* are 0; otherwise (handshake completed), strictly positive
* to indicate size used by kernel and cmd field stays
* %ETHTOOL_GLINKSETTINGS, all other fields populated by driver. For
* %ETHTOOL_SLINKSETTINGS: must be valid on entry, ie. a positive
* value returned previously by %ETHTOOL_GLINKSETTINGS, otherwise
* refused. For drivers: ignore this field (use kernel's
* __ETHTOOL_LINK_MODE_MASK_NBITS instead), any change to it will
* be overwritten by kernel.
* @supported: Bitmap with each bit meaning given by
* %ethtool_link_mode_bit_indices for the link modes, physical
* connectors and other link features for which the interface
* supports autonegotiation or auto-detection. Read-only.
* @advertising: Bitmap with each bit meaning given by
* %ethtool_link_mode_bit_indices for the link modes, physical
* connectors and other link features that are advertised through
* autonegotiation or enabled for auto-detection.
* @lp_advertising: Bitmap with each bit meaning given by
* %ethtool_link_mode_bit_indices for the link modes, and other
* link features that the link partner advertised through
* autonegotiation; 0 if unknown or not applicable. Read-only.
* @transceiver: Used to distinguish different possible PHY types,
* reported consistently by PHYLIB. Read-only.
* @master_slave_cfg: Master/slave port mode.
* @master_slave_state: Master/slave port state.
* @reserved: Reserved for future use; see the note on reserved space.
* @reserved1: Reserved for future use; see the note on reserved space.
* @link_mode_masks: Variable length bitmaps.
*
* If autonegotiation is disabled, the speed and @duplex represent the
* fixed link mode and are writable if the driver supports multiple
* link modes. If it is enabled then they are read-only; if the link
* is up they represent the negotiated link mode; if the link is down,
* the speed is 0, %SPEED_UNKNOWN or the highest enabled speed and
* @duplex is %DUPLEX_UNKNOWN or the best enabled duplex mode.
*
* Some hardware interfaces may have multiple PHYs and/or physical
* connectors fitted or do not allow the driver to detect which are
* fitted. For these interfaces @port and/or @phy_address may be
* writable, possibly dependent on @autoneg being %AUTONEG_DISABLE.
* Otherwise, attempts to write different values may be ignored or
* rejected.
*
* Deprecated %ethtool_cmd fields transceiver, maxtxpkt and maxrxpkt
* are not available in %ethtool_link_settings. These fields will be
* always set to zero in %ETHTOOL_GSET reply and %ETHTOOL_SSET will
* fail if any of them is set to non-zero value.
*
* Users should assume that all fields not marked read-only are
* writable and subject to validation by the driver. They should use
* %ETHTOOL_GLINKSETTINGS to get the current values before making specific
* changes and then applying them with %ETHTOOL_SLINKSETTINGS.
*
* Drivers that implement %get_link_ksettings and/or
* %set_link_ksettings should ignore the @cmd
* and @link_mode_masks_nwords fields (any change to them overwritten
* by kernel), and rely only on kernel's internal
* %__ETHTOOL_LINK_MODE_MASK_NBITS and
* %ethtool_link_mode_mask_t. Drivers that implement
* %set_link_ksettings() should validate all fields other than @cmd
* and @link_mode_masks_nwords that are not described as read-only or
* deprecated, and must ignore all fields described as read-only.
*/
struct ethtool_link_settings {
uint32_t cmd;
uint32_t speed;
uint8_t duplex;
uint8_t port;
uint8_t phy_address;
uint8_t autoneg;
uint8_t mdio_support;
uint8_t eth_tp_mdix;
uint8_t eth_tp_mdix_ctrl;
int8_t link_mode_masks_nwords;
uint8_t transceiver;
uint8_t master_slave_cfg;
uint8_t master_slave_state;
uint8_t reserved1[1];
uint32_t reserved[7];
uint32_t link_mode_masks[0];
/* layout of link_mode_masks fields:
* uint32_t map_supported[link_mode_masks_nwords];
* uint32_t map_advertising[link_mode_masks_nwords];
* uint32_t map_lp_advertising[link_mode_masks_nwords];
*/
};
#endif /* _LINUX_ETHTOOL_H */
Reference in New Issue View Git Blame Copy Permalink