f4bbaaf584
This loses the messages explaining the error printed with error_printf_unless_qmp(). The next commit will make up for the loss. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
1407 lines
38 KiB
C
1407 lines
38 KiB
C
/*
|
|
* USB UHCI controller emulation
|
|
*
|
|
* Copyright (c) 2005 Fabrice Bellard
|
|
*
|
|
* Copyright (c) 2008 Max Krasnyansky
|
|
* Magor rewrite of the UHCI data structures parser and frame processor
|
|
* Support for fully async operation and multiple outstanding transactions
|
|
*
|
|
* Permission is hereby granted, free of charge, to any person obtaining a copy
|
|
* of this software and associated documentation files (the "Software"), to deal
|
|
* in the Software without restriction, including without limitation the rights
|
|
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
|
|
* copies of the Software, and to permit persons to whom the Software is
|
|
* furnished to do so, subject to the following conditions:
|
|
*
|
|
* The above copyright notice and this permission notice shall be included in
|
|
* all copies or substantial portions of the Software.
|
|
*
|
|
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
|
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
|
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
|
|
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
|
|
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
|
|
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
|
|
* THE SOFTWARE.
|
|
*/
|
|
#include "hw/hw.h"
|
|
#include "hw/usb.h"
|
|
#include "hw/usb/uhci-regs.h"
|
|
#include "hw/pci/pci.h"
|
|
#include "qemu/timer.h"
|
|
#include "qemu/iov.h"
|
|
#include "sysemu/dma.h"
|
|
#include "trace.h"
|
|
#include "qemu/main-loop.h"
|
|
|
|
#define FRAME_TIMER_FREQ 1000
|
|
|
|
#define FRAME_MAX_LOOPS 256
|
|
|
|
/* Must be large enough to handle 10 frame delay for initial isoc requests */
|
|
#define QH_VALID 32
|
|
|
|
#define MAX_FRAMES_PER_TICK (QH_VALID / 2)
|
|
|
|
#define NB_PORTS 2
|
|
|
|
enum {
|
|
TD_RESULT_STOP_FRAME = 10,
|
|
TD_RESULT_COMPLETE,
|
|
TD_RESULT_NEXT_QH,
|
|
TD_RESULT_ASYNC_START,
|
|
TD_RESULT_ASYNC_CONT,
|
|
};
|
|
|
|
typedef struct UHCIState UHCIState;
|
|
typedef struct UHCIAsync UHCIAsync;
|
|
typedef struct UHCIQueue UHCIQueue;
|
|
typedef struct UHCIInfo UHCIInfo;
|
|
typedef struct UHCIPCIDeviceClass UHCIPCIDeviceClass;
|
|
|
|
struct UHCIInfo {
|
|
const char *name;
|
|
uint16_t vendor_id;
|
|
uint16_t device_id;
|
|
uint8_t revision;
|
|
uint8_t irq_pin;
|
|
int (*initfn)(PCIDevice *dev);
|
|
bool unplug;
|
|
};
|
|
|
|
struct UHCIPCIDeviceClass {
|
|
PCIDeviceClass parent_class;
|
|
UHCIInfo info;
|
|
};
|
|
|
|
/*
|
|
* Pending async transaction.
|
|
* 'packet' must be the first field because completion
|
|
* handler does "(UHCIAsync *) pkt" cast.
|
|
*/
|
|
|
|
struct UHCIAsync {
|
|
USBPacket packet;
|
|
uint8_t static_buf[64]; /* 64 bytes is enough, except for isoc packets */
|
|
uint8_t *buf;
|
|
UHCIQueue *queue;
|
|
QTAILQ_ENTRY(UHCIAsync) next;
|
|
uint32_t td_addr;
|
|
uint8_t done;
|
|
};
|
|
|
|
struct UHCIQueue {
|
|
uint32_t qh_addr;
|
|
uint32_t token;
|
|
UHCIState *uhci;
|
|
USBEndpoint *ep;
|
|
QTAILQ_ENTRY(UHCIQueue) next;
|
|
QTAILQ_HEAD(asyncs_head, UHCIAsync) asyncs;
|
|
int8_t valid;
|
|
};
|
|
|
|
typedef struct UHCIPort {
|
|
USBPort port;
|
|
uint16_t ctrl;
|
|
} UHCIPort;
|
|
|
|
struct UHCIState {
|
|
PCIDevice dev;
|
|
MemoryRegion io_bar;
|
|
USBBus bus; /* Note unused when we're a companion controller */
|
|
uint16_t cmd; /* cmd register */
|
|
uint16_t status;
|
|
uint16_t intr; /* interrupt enable register */
|
|
uint16_t frnum; /* frame number */
|
|
uint32_t fl_base_addr; /* frame list base address */
|
|
uint8_t sof_timing;
|
|
uint8_t status2; /* bit 0 and 1 are used to generate UHCI_STS_USBINT */
|
|
int64_t expire_time;
|
|
QEMUTimer *frame_timer;
|
|
QEMUBH *bh;
|
|
uint32_t frame_bytes;
|
|
uint32_t frame_bandwidth;
|
|
bool completions_only;
|
|
UHCIPort ports[NB_PORTS];
|
|
|
|
/* Interrupts that should be raised at the end of the current frame. */
|
|
uint32_t pending_int_mask;
|
|
|
|
/* Active packets */
|
|
QTAILQ_HEAD(, UHCIQueue) queues;
|
|
uint8_t num_ports_vmstate;
|
|
|
|
/* Properties */
|
|
char *masterbus;
|
|
uint32_t firstport;
|
|
uint32_t maxframes;
|
|
};
|
|
|
|
typedef struct UHCI_TD {
|
|
uint32_t link;
|
|
uint32_t ctrl; /* see TD_CTRL_xxx */
|
|
uint32_t token;
|
|
uint32_t buffer;
|
|
} UHCI_TD;
|
|
|
|
typedef struct UHCI_QH {
|
|
uint32_t link;
|
|
uint32_t el_link;
|
|
} UHCI_QH;
|
|
|
|
static void uhci_async_cancel(UHCIAsync *async);
|
|
static void uhci_queue_fill(UHCIQueue *q, UHCI_TD *td);
|
|
static void uhci_resume(void *opaque);
|
|
|
|
static inline int32_t uhci_queue_token(UHCI_TD *td)
|
|
{
|
|
if ((td->token & (0xf << 15)) == 0) {
|
|
/* ctrl ep, cover ep and dev, not pid! */
|
|
return td->token & 0x7ff00;
|
|
} else {
|
|
/* covers ep, dev, pid -> identifies the endpoint */
|
|
return td->token & 0x7ffff;
|
|
}
|
|
}
|
|
|
|
static UHCIQueue *uhci_queue_new(UHCIState *s, uint32_t qh_addr, UHCI_TD *td,
|
|
USBEndpoint *ep)
|
|
{
|
|
UHCIQueue *queue;
|
|
|
|
queue = g_new0(UHCIQueue, 1);
|
|
queue->uhci = s;
|
|
queue->qh_addr = qh_addr;
|
|
queue->token = uhci_queue_token(td);
|
|
queue->ep = ep;
|
|
QTAILQ_INIT(&queue->asyncs);
|
|
QTAILQ_INSERT_HEAD(&s->queues, queue, next);
|
|
queue->valid = QH_VALID;
|
|
trace_usb_uhci_queue_add(queue->token);
|
|
return queue;
|
|
}
|
|
|
|
static void uhci_queue_free(UHCIQueue *queue, const char *reason)
|
|
{
|
|
UHCIState *s = queue->uhci;
|
|
UHCIAsync *async;
|
|
|
|
while (!QTAILQ_EMPTY(&queue->asyncs)) {
|
|
async = QTAILQ_FIRST(&queue->asyncs);
|
|
uhci_async_cancel(async);
|
|
}
|
|
usb_device_ep_stopped(queue->ep->dev, queue->ep);
|
|
|
|
trace_usb_uhci_queue_del(queue->token, reason);
|
|
QTAILQ_REMOVE(&s->queues, queue, next);
|
|
g_free(queue);
|
|
}
|
|
|
|
static UHCIQueue *uhci_queue_find(UHCIState *s, UHCI_TD *td)
|
|
{
|
|
uint32_t token = uhci_queue_token(td);
|
|
UHCIQueue *queue;
|
|
|
|
QTAILQ_FOREACH(queue, &s->queues, next) {
|
|
if (queue->token == token) {
|
|
return queue;
|
|
}
|
|
}
|
|
return NULL;
|
|
}
|
|
|
|
static bool uhci_queue_verify(UHCIQueue *queue, uint32_t qh_addr, UHCI_TD *td,
|
|
uint32_t td_addr, bool queuing)
|
|
{
|
|
UHCIAsync *first = QTAILQ_FIRST(&queue->asyncs);
|
|
uint32_t queue_token_addr = (queue->token >> 8) & 0x7f;
|
|
|
|
return queue->qh_addr == qh_addr &&
|
|
queue->token == uhci_queue_token(td) &&
|
|
queue_token_addr == queue->ep->dev->addr &&
|
|
(queuing || !(td->ctrl & TD_CTRL_ACTIVE) || first == NULL ||
|
|
first->td_addr == td_addr);
|
|
}
|
|
|
|
static UHCIAsync *uhci_async_alloc(UHCIQueue *queue, uint32_t td_addr)
|
|
{
|
|
UHCIAsync *async = g_new0(UHCIAsync, 1);
|
|
|
|
async->queue = queue;
|
|
async->td_addr = td_addr;
|
|
usb_packet_init(&async->packet);
|
|
trace_usb_uhci_packet_add(async->queue->token, async->td_addr);
|
|
|
|
return async;
|
|
}
|
|
|
|
static void uhci_async_free(UHCIAsync *async)
|
|
{
|
|
trace_usb_uhci_packet_del(async->queue->token, async->td_addr);
|
|
usb_packet_cleanup(&async->packet);
|
|
if (async->buf != async->static_buf) {
|
|
g_free(async->buf);
|
|
}
|
|
g_free(async);
|
|
}
|
|
|
|
static void uhci_async_link(UHCIAsync *async)
|
|
{
|
|
UHCIQueue *queue = async->queue;
|
|
QTAILQ_INSERT_TAIL(&queue->asyncs, async, next);
|
|
trace_usb_uhci_packet_link_async(async->queue->token, async->td_addr);
|
|
}
|
|
|
|
static void uhci_async_unlink(UHCIAsync *async)
|
|
{
|
|
UHCIQueue *queue = async->queue;
|
|
QTAILQ_REMOVE(&queue->asyncs, async, next);
|
|
trace_usb_uhci_packet_unlink_async(async->queue->token, async->td_addr);
|
|
}
|
|
|
|
static void uhci_async_cancel(UHCIAsync *async)
|
|
{
|
|
uhci_async_unlink(async);
|
|
trace_usb_uhci_packet_cancel(async->queue->token, async->td_addr,
|
|
async->done);
|
|
if (!async->done)
|
|
usb_cancel_packet(&async->packet);
|
|
uhci_async_free(async);
|
|
}
|
|
|
|
/*
|
|
* Mark all outstanding async packets as invalid.
|
|
* This is used for canceling them when TDs are removed by the HCD.
|
|
*/
|
|
static void uhci_async_validate_begin(UHCIState *s)
|
|
{
|
|
UHCIQueue *queue;
|
|
|
|
QTAILQ_FOREACH(queue, &s->queues, next) {
|
|
queue->valid--;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Cancel async packets that are no longer valid
|
|
*/
|
|
static void uhci_async_validate_end(UHCIState *s)
|
|
{
|
|
UHCIQueue *queue, *n;
|
|
|
|
QTAILQ_FOREACH_SAFE(queue, &s->queues, next, n) {
|
|
if (!queue->valid) {
|
|
uhci_queue_free(queue, "validate-end");
|
|
}
|
|
}
|
|
}
|
|
|
|
static void uhci_async_cancel_device(UHCIState *s, USBDevice *dev)
|
|
{
|
|
UHCIQueue *queue, *n;
|
|
|
|
QTAILQ_FOREACH_SAFE(queue, &s->queues, next, n) {
|
|
if (queue->ep->dev == dev) {
|
|
uhci_queue_free(queue, "cancel-device");
|
|
}
|
|
}
|
|
}
|
|
|
|
static void uhci_async_cancel_all(UHCIState *s)
|
|
{
|
|
UHCIQueue *queue, *nq;
|
|
|
|
QTAILQ_FOREACH_SAFE(queue, &s->queues, next, nq) {
|
|
uhci_queue_free(queue, "cancel-all");
|
|
}
|
|
}
|
|
|
|
static UHCIAsync *uhci_async_find_td(UHCIState *s, uint32_t td_addr)
|
|
{
|
|
UHCIQueue *queue;
|
|
UHCIAsync *async;
|
|
|
|
QTAILQ_FOREACH(queue, &s->queues, next) {
|
|
QTAILQ_FOREACH(async, &queue->asyncs, next) {
|
|
if (async->td_addr == td_addr) {
|
|
return async;
|
|
}
|
|
}
|
|
}
|
|
return NULL;
|
|
}
|
|
|
|
static void uhci_update_irq(UHCIState *s)
|
|
{
|
|
int level;
|
|
if (((s->status2 & 1) && (s->intr & (1 << 2))) ||
|
|
((s->status2 & 2) && (s->intr & (1 << 3))) ||
|
|
((s->status & UHCI_STS_USBERR) && (s->intr & (1 << 0))) ||
|
|
((s->status & UHCI_STS_RD) && (s->intr & (1 << 1))) ||
|
|
(s->status & UHCI_STS_HSERR) ||
|
|
(s->status & UHCI_STS_HCPERR)) {
|
|
level = 1;
|
|
} else {
|
|
level = 0;
|
|
}
|
|
pci_set_irq(&s->dev, level);
|
|
}
|
|
|
|
static void uhci_reset(void *opaque)
|
|
{
|
|
UHCIState *s = opaque;
|
|
uint8_t *pci_conf;
|
|
int i;
|
|
UHCIPort *port;
|
|
|
|
trace_usb_uhci_reset();
|
|
|
|
pci_conf = s->dev.config;
|
|
|
|
pci_conf[0x6a] = 0x01; /* usb clock */
|
|
pci_conf[0x6b] = 0x00;
|
|
s->cmd = 0;
|
|
s->status = 0;
|
|
s->status2 = 0;
|
|
s->intr = 0;
|
|
s->fl_base_addr = 0;
|
|
s->sof_timing = 64;
|
|
|
|
for(i = 0; i < NB_PORTS; i++) {
|
|
port = &s->ports[i];
|
|
port->ctrl = 0x0080;
|
|
if (port->port.dev && port->port.dev->attached) {
|
|
usb_port_reset(&port->port);
|
|
}
|
|
}
|
|
|
|
uhci_async_cancel_all(s);
|
|
qemu_bh_cancel(s->bh);
|
|
uhci_update_irq(s);
|
|
}
|
|
|
|
static const VMStateDescription vmstate_uhci_port = {
|
|
.name = "uhci port",
|
|
.version_id = 1,
|
|
.minimum_version_id = 1,
|
|
.fields = (VMStateField[]) {
|
|
VMSTATE_UINT16(ctrl, UHCIPort),
|
|
VMSTATE_END_OF_LIST()
|
|
}
|
|
};
|
|
|
|
static int uhci_post_load(void *opaque, int version_id)
|
|
{
|
|
UHCIState *s = opaque;
|
|
|
|
if (version_id < 2) {
|
|
s->expire_time = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) +
|
|
(get_ticks_per_sec() / FRAME_TIMER_FREQ);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static const VMStateDescription vmstate_uhci = {
|
|
.name = "uhci",
|
|
.version_id = 3,
|
|
.minimum_version_id = 1,
|
|
.post_load = uhci_post_load,
|
|
.fields = (VMStateField[]) {
|
|
VMSTATE_PCI_DEVICE(dev, UHCIState),
|
|
VMSTATE_UINT8_EQUAL(num_ports_vmstate, UHCIState),
|
|
VMSTATE_STRUCT_ARRAY(ports, UHCIState, NB_PORTS, 1,
|
|
vmstate_uhci_port, UHCIPort),
|
|
VMSTATE_UINT16(cmd, UHCIState),
|
|
VMSTATE_UINT16(status, UHCIState),
|
|
VMSTATE_UINT16(intr, UHCIState),
|
|
VMSTATE_UINT16(frnum, UHCIState),
|
|
VMSTATE_UINT32(fl_base_addr, UHCIState),
|
|
VMSTATE_UINT8(sof_timing, UHCIState),
|
|
VMSTATE_UINT8(status2, UHCIState),
|
|
VMSTATE_TIMER_PTR(frame_timer, UHCIState),
|
|
VMSTATE_INT64_V(expire_time, UHCIState, 2),
|
|
VMSTATE_UINT32_V(pending_int_mask, UHCIState, 3),
|
|
VMSTATE_END_OF_LIST()
|
|
}
|
|
};
|
|
|
|
static void uhci_port_write(void *opaque, hwaddr addr,
|
|
uint64_t val, unsigned size)
|
|
{
|
|
UHCIState *s = opaque;
|
|
|
|
trace_usb_uhci_mmio_writew(addr, val);
|
|
|
|
switch(addr) {
|
|
case 0x00:
|
|
if ((val & UHCI_CMD_RS) && !(s->cmd & UHCI_CMD_RS)) {
|
|
/* start frame processing */
|
|
trace_usb_uhci_schedule_start();
|
|
s->expire_time = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) +
|
|
(get_ticks_per_sec() / FRAME_TIMER_FREQ);
|
|
timer_mod(s->frame_timer, s->expire_time);
|
|
s->status &= ~UHCI_STS_HCHALTED;
|
|
} else if (!(val & UHCI_CMD_RS)) {
|
|
s->status |= UHCI_STS_HCHALTED;
|
|
}
|
|
if (val & UHCI_CMD_GRESET) {
|
|
UHCIPort *port;
|
|
int i;
|
|
|
|
/* send reset on the USB bus */
|
|
for(i = 0; i < NB_PORTS; i++) {
|
|
port = &s->ports[i];
|
|
usb_device_reset(port->port.dev);
|
|
}
|
|
uhci_reset(s);
|
|
return;
|
|
}
|
|
if (val & UHCI_CMD_HCRESET) {
|
|
uhci_reset(s);
|
|
return;
|
|
}
|
|
s->cmd = val;
|
|
if (val & UHCI_CMD_EGSM) {
|
|
if ((s->ports[0].ctrl & UHCI_PORT_RD) ||
|
|
(s->ports[1].ctrl & UHCI_PORT_RD)) {
|
|
uhci_resume(s);
|
|
}
|
|
}
|
|
break;
|
|
case 0x02:
|
|
s->status &= ~val;
|
|
/* XXX: the chip spec is not coherent, so we add a hidden
|
|
register to distinguish between IOC and SPD */
|
|
if (val & UHCI_STS_USBINT)
|
|
s->status2 = 0;
|
|
uhci_update_irq(s);
|
|
break;
|
|
case 0x04:
|
|
s->intr = val;
|
|
uhci_update_irq(s);
|
|
break;
|
|
case 0x06:
|
|
if (s->status & UHCI_STS_HCHALTED)
|
|
s->frnum = val & 0x7ff;
|
|
break;
|
|
case 0x08:
|
|
s->fl_base_addr &= 0xffff0000;
|
|
s->fl_base_addr |= val & ~0xfff;
|
|
break;
|
|
case 0x0a:
|
|
s->fl_base_addr &= 0x0000ffff;
|
|
s->fl_base_addr |= (val << 16);
|
|
break;
|
|
case 0x0c:
|
|
s->sof_timing = val & 0xff;
|
|
break;
|
|
case 0x10 ... 0x1f:
|
|
{
|
|
UHCIPort *port;
|
|
USBDevice *dev;
|
|
int n;
|
|
|
|
n = (addr >> 1) & 7;
|
|
if (n >= NB_PORTS)
|
|
return;
|
|
port = &s->ports[n];
|
|
dev = port->port.dev;
|
|
if (dev && dev->attached) {
|
|
/* port reset */
|
|
if ( (val & UHCI_PORT_RESET) &&
|
|
!(port->ctrl & UHCI_PORT_RESET) ) {
|
|
usb_device_reset(dev);
|
|
}
|
|
}
|
|
port->ctrl &= UHCI_PORT_READ_ONLY;
|
|
/* enabled may only be set if a device is connected */
|
|
if (!(port->ctrl & UHCI_PORT_CCS)) {
|
|
val &= ~UHCI_PORT_EN;
|
|
}
|
|
port->ctrl |= (val & ~UHCI_PORT_READ_ONLY);
|
|
/* some bits are reset when a '1' is written to them */
|
|
port->ctrl &= ~(val & UHCI_PORT_WRITE_CLEAR);
|
|
}
|
|
break;
|
|
}
|
|
}
|
|
|
|
static uint64_t uhci_port_read(void *opaque, hwaddr addr, unsigned size)
|
|
{
|
|
UHCIState *s = opaque;
|
|
uint32_t val;
|
|
|
|
switch(addr) {
|
|
case 0x00:
|
|
val = s->cmd;
|
|
break;
|
|
case 0x02:
|
|
val = s->status;
|
|
break;
|
|
case 0x04:
|
|
val = s->intr;
|
|
break;
|
|
case 0x06:
|
|
val = s->frnum;
|
|
break;
|
|
case 0x08:
|
|
val = s->fl_base_addr & 0xffff;
|
|
break;
|
|
case 0x0a:
|
|
val = (s->fl_base_addr >> 16) & 0xffff;
|
|
break;
|
|
case 0x0c:
|
|
val = s->sof_timing;
|
|
break;
|
|
case 0x10 ... 0x1f:
|
|
{
|
|
UHCIPort *port;
|
|
int n;
|
|
n = (addr >> 1) & 7;
|
|
if (n >= NB_PORTS)
|
|
goto read_default;
|
|
port = &s->ports[n];
|
|
val = port->ctrl;
|
|
}
|
|
break;
|
|
default:
|
|
read_default:
|
|
val = 0xff7f; /* disabled port */
|
|
break;
|
|
}
|
|
|
|
trace_usb_uhci_mmio_readw(addr, val);
|
|
|
|
return val;
|
|
}
|
|
|
|
/* signal resume if controller suspended */
|
|
static void uhci_resume (void *opaque)
|
|
{
|
|
UHCIState *s = (UHCIState *)opaque;
|
|
|
|
if (!s)
|
|
return;
|
|
|
|
if (s->cmd & UHCI_CMD_EGSM) {
|
|
s->cmd |= UHCI_CMD_FGR;
|
|
s->status |= UHCI_STS_RD;
|
|
uhci_update_irq(s);
|
|
}
|
|
}
|
|
|
|
static void uhci_attach(USBPort *port1)
|
|
{
|
|
UHCIState *s = port1->opaque;
|
|
UHCIPort *port = &s->ports[port1->index];
|
|
|
|
/* set connect status */
|
|
port->ctrl |= UHCI_PORT_CCS | UHCI_PORT_CSC;
|
|
|
|
/* update speed */
|
|
if (port->port.dev->speed == USB_SPEED_LOW) {
|
|
port->ctrl |= UHCI_PORT_LSDA;
|
|
} else {
|
|
port->ctrl &= ~UHCI_PORT_LSDA;
|
|
}
|
|
|
|
uhci_resume(s);
|
|
}
|
|
|
|
static void uhci_detach(USBPort *port1)
|
|
{
|
|
UHCIState *s = port1->opaque;
|
|
UHCIPort *port = &s->ports[port1->index];
|
|
|
|
uhci_async_cancel_device(s, port1->dev);
|
|
|
|
/* set connect status */
|
|
if (port->ctrl & UHCI_PORT_CCS) {
|
|
port->ctrl &= ~UHCI_PORT_CCS;
|
|
port->ctrl |= UHCI_PORT_CSC;
|
|
}
|
|
/* disable port */
|
|
if (port->ctrl & UHCI_PORT_EN) {
|
|
port->ctrl &= ~UHCI_PORT_EN;
|
|
port->ctrl |= UHCI_PORT_ENC;
|
|
}
|
|
|
|
uhci_resume(s);
|
|
}
|
|
|
|
static void uhci_child_detach(USBPort *port1, USBDevice *child)
|
|
{
|
|
UHCIState *s = port1->opaque;
|
|
|
|
uhci_async_cancel_device(s, child);
|
|
}
|
|
|
|
static void uhci_wakeup(USBPort *port1)
|
|
{
|
|
UHCIState *s = port1->opaque;
|
|
UHCIPort *port = &s->ports[port1->index];
|
|
|
|
if (port->ctrl & UHCI_PORT_SUSPEND && !(port->ctrl & UHCI_PORT_RD)) {
|
|
port->ctrl |= UHCI_PORT_RD;
|
|
uhci_resume(s);
|
|
}
|
|
}
|
|
|
|
static USBDevice *uhci_find_device(UHCIState *s, uint8_t addr)
|
|
{
|
|
USBDevice *dev;
|
|
int i;
|
|
|
|
for (i = 0; i < NB_PORTS; i++) {
|
|
UHCIPort *port = &s->ports[i];
|
|
if (!(port->ctrl & UHCI_PORT_EN)) {
|
|
continue;
|
|
}
|
|
dev = usb_find_device(&port->port, addr);
|
|
if (dev != NULL) {
|
|
return dev;
|
|
}
|
|
}
|
|
return NULL;
|
|
}
|
|
|
|
static void uhci_read_td(UHCIState *s, UHCI_TD *td, uint32_t link)
|
|
{
|
|
pci_dma_read(&s->dev, link & ~0xf, td, sizeof(*td));
|
|
le32_to_cpus(&td->link);
|
|
le32_to_cpus(&td->ctrl);
|
|
le32_to_cpus(&td->token);
|
|
le32_to_cpus(&td->buffer);
|
|
}
|
|
|
|
static int uhci_handle_td_error(UHCIState *s, UHCI_TD *td, uint32_t td_addr,
|
|
int status, uint32_t *int_mask)
|
|
{
|
|
uint32_t queue_token = uhci_queue_token(td);
|
|
int ret;
|
|
|
|
switch (status) {
|
|
case USB_RET_NAK:
|
|
td->ctrl |= TD_CTRL_NAK;
|
|
return TD_RESULT_NEXT_QH;
|
|
|
|
case USB_RET_STALL:
|
|
td->ctrl |= TD_CTRL_STALL;
|
|
trace_usb_uhci_packet_complete_stall(queue_token, td_addr);
|
|
ret = TD_RESULT_NEXT_QH;
|
|
break;
|
|
|
|
case USB_RET_BABBLE:
|
|
td->ctrl |= TD_CTRL_BABBLE | TD_CTRL_STALL;
|
|
/* frame interrupted */
|
|
trace_usb_uhci_packet_complete_babble(queue_token, td_addr);
|
|
ret = TD_RESULT_STOP_FRAME;
|
|
break;
|
|
|
|
case USB_RET_IOERROR:
|
|
case USB_RET_NODEV:
|
|
default:
|
|
td->ctrl |= TD_CTRL_TIMEOUT;
|
|
td->ctrl &= ~(3 << TD_CTRL_ERROR_SHIFT);
|
|
trace_usb_uhci_packet_complete_error(queue_token, td_addr);
|
|
ret = TD_RESULT_NEXT_QH;
|
|
break;
|
|
}
|
|
|
|
td->ctrl &= ~TD_CTRL_ACTIVE;
|
|
s->status |= UHCI_STS_USBERR;
|
|
if (td->ctrl & TD_CTRL_IOC) {
|
|
*int_mask |= 0x01;
|
|
}
|
|
uhci_update_irq(s);
|
|
return ret;
|
|
}
|
|
|
|
static int uhci_complete_td(UHCIState *s, UHCI_TD *td, UHCIAsync *async, uint32_t *int_mask)
|
|
{
|
|
int len = 0, max_len;
|
|
uint8_t pid;
|
|
|
|
max_len = ((td->token >> 21) + 1) & 0x7ff;
|
|
pid = td->token & 0xff;
|
|
|
|
if (td->ctrl & TD_CTRL_IOS)
|
|
td->ctrl &= ~TD_CTRL_ACTIVE;
|
|
|
|
if (async->packet.status != USB_RET_SUCCESS) {
|
|
return uhci_handle_td_error(s, td, async->td_addr,
|
|
async->packet.status, int_mask);
|
|
}
|
|
|
|
len = async->packet.actual_length;
|
|
td->ctrl = (td->ctrl & ~0x7ff) | ((len - 1) & 0x7ff);
|
|
|
|
/* The NAK bit may have been set by a previous frame, so clear it
|
|
here. The docs are somewhat unclear, but win2k relies on this
|
|
behavior. */
|
|
td->ctrl &= ~(TD_CTRL_ACTIVE | TD_CTRL_NAK);
|
|
if (td->ctrl & TD_CTRL_IOC)
|
|
*int_mask |= 0x01;
|
|
|
|
if (pid == USB_TOKEN_IN) {
|
|
pci_dma_write(&s->dev, td->buffer, async->buf, len);
|
|
if ((td->ctrl & TD_CTRL_SPD) && len < max_len) {
|
|
*int_mask |= 0x02;
|
|
/* short packet: do not update QH */
|
|
trace_usb_uhci_packet_complete_shortxfer(async->queue->token,
|
|
async->td_addr);
|
|
return TD_RESULT_NEXT_QH;
|
|
}
|
|
}
|
|
|
|
/* success */
|
|
trace_usb_uhci_packet_complete_success(async->queue->token,
|
|
async->td_addr);
|
|
return TD_RESULT_COMPLETE;
|
|
}
|
|
|
|
static int uhci_handle_td(UHCIState *s, UHCIQueue *q, uint32_t qh_addr,
|
|
UHCI_TD *td, uint32_t td_addr, uint32_t *int_mask)
|
|
{
|
|
int ret, max_len;
|
|
bool spd;
|
|
bool queuing = (q != NULL);
|
|
uint8_t pid = td->token & 0xff;
|
|
UHCIAsync *async = uhci_async_find_td(s, td_addr);
|
|
|
|
if (async) {
|
|
if (uhci_queue_verify(async->queue, qh_addr, td, td_addr, queuing)) {
|
|
assert(q == NULL || q == async->queue);
|
|
q = async->queue;
|
|
} else {
|
|
uhci_queue_free(async->queue, "guest re-used pending td");
|
|
async = NULL;
|
|
}
|
|
}
|
|
|
|
if (q == NULL) {
|
|
q = uhci_queue_find(s, td);
|
|
if (q && !uhci_queue_verify(q, qh_addr, td, td_addr, queuing)) {
|
|
uhci_queue_free(q, "guest re-used qh");
|
|
q = NULL;
|
|
}
|
|
}
|
|
|
|
if (q) {
|
|
q->valid = QH_VALID;
|
|
}
|
|
|
|
/* Is active ? */
|
|
if (!(td->ctrl & TD_CTRL_ACTIVE)) {
|
|
if (async) {
|
|
/* Guest marked a pending td non-active, cancel the queue */
|
|
uhci_queue_free(async->queue, "pending td non-active");
|
|
}
|
|
/*
|
|
* ehci11d spec page 22: "Even if the Active bit in the TD is already
|
|
* cleared when the TD is fetched ... an IOC interrupt is generated"
|
|
*/
|
|
if (td->ctrl & TD_CTRL_IOC) {
|
|
*int_mask |= 0x01;
|
|
}
|
|
return TD_RESULT_NEXT_QH;
|
|
}
|
|
|
|
if (async) {
|
|
if (queuing) {
|
|
/* we are busy filling the queue, we are not prepared
|
|
to consume completed packages then, just leave them
|
|
in async state */
|
|
return TD_RESULT_ASYNC_CONT;
|
|
}
|
|
if (!async->done) {
|
|
UHCI_TD last_td;
|
|
UHCIAsync *last = QTAILQ_LAST(&async->queue->asyncs, asyncs_head);
|
|
/*
|
|
* While we are waiting for the current td to complete, the guest
|
|
* may have added more tds to the queue. Note we re-read the td
|
|
* rather then caching it, as we want to see guest made changes!
|
|
*/
|
|
uhci_read_td(s, &last_td, last->td_addr);
|
|
uhci_queue_fill(async->queue, &last_td);
|
|
|
|
return TD_RESULT_ASYNC_CONT;
|
|
}
|
|
uhci_async_unlink(async);
|
|
goto done;
|
|
}
|
|
|
|
if (s->completions_only) {
|
|
return TD_RESULT_ASYNC_CONT;
|
|
}
|
|
|
|
/* Allocate new packet */
|
|
if (q == NULL) {
|
|
USBDevice *dev = uhci_find_device(s, (td->token >> 8) & 0x7f);
|
|
USBEndpoint *ep = usb_ep_get(dev, pid, (td->token >> 15) & 0xf);
|
|
|
|
if (ep == NULL) {
|
|
return uhci_handle_td_error(s, td, td_addr, USB_RET_NODEV,
|
|
int_mask);
|
|
}
|
|
q = uhci_queue_new(s, qh_addr, td, ep);
|
|
}
|
|
async = uhci_async_alloc(q, td_addr);
|
|
|
|
max_len = ((td->token >> 21) + 1) & 0x7ff;
|
|
spd = (pid == USB_TOKEN_IN && (td->ctrl & TD_CTRL_SPD) != 0);
|
|
usb_packet_setup(&async->packet, pid, q->ep, 0, td_addr, spd,
|
|
(td->ctrl & TD_CTRL_IOC) != 0);
|
|
if (max_len <= sizeof(async->static_buf)) {
|
|
async->buf = async->static_buf;
|
|
} else {
|
|
async->buf = g_malloc(max_len);
|
|
}
|
|
usb_packet_addbuf(&async->packet, async->buf, max_len);
|
|
|
|
switch(pid) {
|
|
case USB_TOKEN_OUT:
|
|
case USB_TOKEN_SETUP:
|
|
pci_dma_read(&s->dev, td->buffer, async->buf, max_len);
|
|
usb_handle_packet(q->ep->dev, &async->packet);
|
|
if (async->packet.status == USB_RET_SUCCESS) {
|
|
async->packet.actual_length = max_len;
|
|
}
|
|
break;
|
|
|
|
case USB_TOKEN_IN:
|
|
usb_handle_packet(q->ep->dev, &async->packet);
|
|
break;
|
|
|
|
default:
|
|
/* invalid pid : frame interrupted */
|
|
uhci_async_free(async);
|
|
s->status |= UHCI_STS_HCPERR;
|
|
uhci_update_irq(s);
|
|
return TD_RESULT_STOP_FRAME;
|
|
}
|
|
|
|
if (async->packet.status == USB_RET_ASYNC) {
|
|
uhci_async_link(async);
|
|
if (!queuing) {
|
|
uhci_queue_fill(q, td);
|
|
}
|
|
return TD_RESULT_ASYNC_START;
|
|
}
|
|
|
|
done:
|
|
ret = uhci_complete_td(s, td, async, int_mask);
|
|
uhci_async_free(async);
|
|
return ret;
|
|
}
|
|
|
|
static void uhci_async_complete(USBPort *port, USBPacket *packet)
|
|
{
|
|
UHCIAsync *async = container_of(packet, UHCIAsync, packet);
|
|
UHCIState *s = async->queue->uhci;
|
|
|
|
if (packet->status == USB_RET_REMOVE_FROM_QUEUE) {
|
|
uhci_async_cancel(async);
|
|
return;
|
|
}
|
|
|
|
async->done = 1;
|
|
/* Force processing of this packet *now*, needed for migration */
|
|
s->completions_only = true;
|
|
qemu_bh_schedule(s->bh);
|
|
}
|
|
|
|
static int is_valid(uint32_t link)
|
|
{
|
|
return (link & 1) == 0;
|
|
}
|
|
|
|
static int is_qh(uint32_t link)
|
|
{
|
|
return (link & 2) != 0;
|
|
}
|
|
|
|
static int depth_first(uint32_t link)
|
|
{
|
|
return (link & 4) != 0;
|
|
}
|
|
|
|
/* QH DB used for detecting QH loops */
|
|
#define UHCI_MAX_QUEUES 128
|
|
typedef struct {
|
|
uint32_t addr[UHCI_MAX_QUEUES];
|
|
int count;
|
|
} QhDb;
|
|
|
|
static void qhdb_reset(QhDb *db)
|
|
{
|
|
db->count = 0;
|
|
}
|
|
|
|
/* Add QH to DB. Returns 1 if already present or DB is full. */
|
|
static int qhdb_insert(QhDb *db, uint32_t addr)
|
|
{
|
|
int i;
|
|
for (i = 0; i < db->count; i++)
|
|
if (db->addr[i] == addr)
|
|
return 1;
|
|
|
|
if (db->count >= UHCI_MAX_QUEUES)
|
|
return 1;
|
|
|
|
db->addr[db->count++] = addr;
|
|
return 0;
|
|
}
|
|
|
|
static void uhci_queue_fill(UHCIQueue *q, UHCI_TD *td)
|
|
{
|
|
uint32_t int_mask = 0;
|
|
uint32_t plink = td->link;
|
|
UHCI_TD ptd;
|
|
int ret;
|
|
|
|
while (is_valid(plink)) {
|
|
uhci_read_td(q->uhci, &ptd, plink);
|
|
if (!(ptd.ctrl & TD_CTRL_ACTIVE)) {
|
|
break;
|
|
}
|
|
if (uhci_queue_token(&ptd) != q->token) {
|
|
break;
|
|
}
|
|
trace_usb_uhci_td_queue(plink & ~0xf, ptd.ctrl, ptd.token);
|
|
ret = uhci_handle_td(q->uhci, q, q->qh_addr, &ptd, plink, &int_mask);
|
|
if (ret == TD_RESULT_ASYNC_CONT) {
|
|
break;
|
|
}
|
|
assert(ret == TD_RESULT_ASYNC_START);
|
|
assert(int_mask == 0);
|
|
plink = ptd.link;
|
|
}
|
|
usb_device_flush_ep_queue(q->ep->dev, q->ep);
|
|
}
|
|
|
|
static void uhci_process_frame(UHCIState *s)
|
|
{
|
|
uint32_t frame_addr, link, old_td_ctrl, val, int_mask;
|
|
uint32_t curr_qh, td_count = 0;
|
|
int cnt, ret;
|
|
UHCI_TD td;
|
|
UHCI_QH qh;
|
|
QhDb qhdb;
|
|
|
|
frame_addr = s->fl_base_addr + ((s->frnum & 0x3ff) << 2);
|
|
|
|
pci_dma_read(&s->dev, frame_addr, &link, 4);
|
|
le32_to_cpus(&link);
|
|
|
|
int_mask = 0;
|
|
curr_qh = 0;
|
|
|
|
qhdb_reset(&qhdb);
|
|
|
|
for (cnt = FRAME_MAX_LOOPS; is_valid(link) && cnt; cnt--) {
|
|
if (!s->completions_only && s->frame_bytes >= s->frame_bandwidth) {
|
|
/* We've reached the usb 1.1 bandwidth, which is
|
|
1280 bytes/frame, stop processing */
|
|
trace_usb_uhci_frame_stop_bandwidth();
|
|
break;
|
|
}
|
|
if (is_qh(link)) {
|
|
/* QH */
|
|
trace_usb_uhci_qh_load(link & ~0xf);
|
|
|
|
if (qhdb_insert(&qhdb, link)) {
|
|
/*
|
|
* We're going in circles. Which is not a bug because
|
|
* HCD is allowed to do that as part of the BW management.
|
|
*
|
|
* Stop processing here if no transaction has been done
|
|
* since we've been here last time.
|
|
*/
|
|
if (td_count == 0) {
|
|
trace_usb_uhci_frame_loop_stop_idle();
|
|
break;
|
|
} else {
|
|
trace_usb_uhci_frame_loop_continue();
|
|
td_count = 0;
|
|
qhdb_reset(&qhdb);
|
|
qhdb_insert(&qhdb, link);
|
|
}
|
|
}
|
|
|
|
pci_dma_read(&s->dev, link & ~0xf, &qh, sizeof(qh));
|
|
le32_to_cpus(&qh.link);
|
|
le32_to_cpus(&qh.el_link);
|
|
|
|
if (!is_valid(qh.el_link)) {
|
|
/* QH w/o elements */
|
|
curr_qh = 0;
|
|
link = qh.link;
|
|
} else {
|
|
/* QH with elements */
|
|
curr_qh = link;
|
|
link = qh.el_link;
|
|
}
|
|
continue;
|
|
}
|
|
|
|
/* TD */
|
|
uhci_read_td(s, &td, link);
|
|
trace_usb_uhci_td_load(curr_qh & ~0xf, link & ~0xf, td.ctrl, td.token);
|
|
|
|
old_td_ctrl = td.ctrl;
|
|
ret = uhci_handle_td(s, NULL, curr_qh, &td, link, &int_mask);
|
|
if (old_td_ctrl != td.ctrl) {
|
|
/* update the status bits of the TD */
|
|
val = cpu_to_le32(td.ctrl);
|
|
pci_dma_write(&s->dev, (link & ~0xf) + 4, &val, sizeof(val));
|
|
}
|
|
|
|
switch (ret) {
|
|
case TD_RESULT_STOP_FRAME: /* interrupted frame */
|
|
goto out;
|
|
|
|
case TD_RESULT_NEXT_QH:
|
|
case TD_RESULT_ASYNC_CONT:
|
|
trace_usb_uhci_td_nextqh(curr_qh & ~0xf, link & ~0xf);
|
|
link = curr_qh ? qh.link : td.link;
|
|
continue;
|
|
|
|
case TD_RESULT_ASYNC_START:
|
|
trace_usb_uhci_td_async(curr_qh & ~0xf, link & ~0xf);
|
|
link = curr_qh ? qh.link : td.link;
|
|
continue;
|
|
|
|
case TD_RESULT_COMPLETE:
|
|
trace_usb_uhci_td_complete(curr_qh & ~0xf, link & ~0xf);
|
|
link = td.link;
|
|
td_count++;
|
|
s->frame_bytes += (td.ctrl & 0x7ff) + 1;
|
|
|
|
if (curr_qh) {
|
|
/* update QH element link */
|
|
qh.el_link = link;
|
|
val = cpu_to_le32(qh.el_link);
|
|
pci_dma_write(&s->dev, (curr_qh & ~0xf) + 4, &val, sizeof(val));
|
|
|
|
if (!depth_first(link)) {
|
|
/* done with this QH */
|
|
curr_qh = 0;
|
|
link = qh.link;
|
|
}
|
|
}
|
|
break;
|
|
|
|
default:
|
|
assert(!"unknown return code");
|
|
}
|
|
|
|
/* go to the next entry */
|
|
}
|
|
|
|
out:
|
|
s->pending_int_mask |= int_mask;
|
|
}
|
|
|
|
static void uhci_bh(void *opaque)
|
|
{
|
|
UHCIState *s = opaque;
|
|
uhci_process_frame(s);
|
|
}
|
|
|
|
static void uhci_frame_timer(void *opaque)
|
|
{
|
|
UHCIState *s = opaque;
|
|
uint64_t t_now, t_last_run;
|
|
int i, frames;
|
|
const uint64_t frame_t = get_ticks_per_sec() / FRAME_TIMER_FREQ;
|
|
|
|
s->completions_only = false;
|
|
qemu_bh_cancel(s->bh);
|
|
|
|
if (!(s->cmd & UHCI_CMD_RS)) {
|
|
/* Full stop */
|
|
trace_usb_uhci_schedule_stop();
|
|
timer_del(s->frame_timer);
|
|
uhci_async_cancel_all(s);
|
|
/* set hchalted bit in status - UHCI11D 2.1.2 */
|
|
s->status |= UHCI_STS_HCHALTED;
|
|
return;
|
|
}
|
|
|
|
/* We still store expire_time in our state, for migration */
|
|
t_last_run = s->expire_time - frame_t;
|
|
t_now = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL);
|
|
|
|
/* Process up to MAX_FRAMES_PER_TICK frames */
|
|
frames = (t_now - t_last_run) / frame_t;
|
|
if (frames > s->maxframes) {
|
|
int skipped = frames - s->maxframes;
|
|
s->expire_time += skipped * frame_t;
|
|
s->frnum = (s->frnum + skipped) & 0x7ff;
|
|
frames -= skipped;
|
|
}
|
|
if (frames > MAX_FRAMES_PER_TICK) {
|
|
frames = MAX_FRAMES_PER_TICK;
|
|
}
|
|
|
|
for (i = 0; i < frames; i++) {
|
|
s->frame_bytes = 0;
|
|
trace_usb_uhci_frame_start(s->frnum);
|
|
uhci_async_validate_begin(s);
|
|
uhci_process_frame(s);
|
|
uhci_async_validate_end(s);
|
|
/* The spec says frnum is the frame currently being processed, and
|
|
* the guest must look at frnum - 1 on interrupt, so inc frnum now */
|
|
s->frnum = (s->frnum + 1) & 0x7ff;
|
|
s->expire_time += frame_t;
|
|
}
|
|
|
|
/* Complete the previous frame(s) */
|
|
if (s->pending_int_mask) {
|
|
s->status2 |= s->pending_int_mask;
|
|
s->status |= UHCI_STS_USBINT;
|
|
uhci_update_irq(s);
|
|
}
|
|
s->pending_int_mask = 0;
|
|
|
|
timer_mod(s->frame_timer, t_now + frame_t);
|
|
}
|
|
|
|
static const MemoryRegionOps uhci_ioport_ops = {
|
|
.read = uhci_port_read,
|
|
.write = uhci_port_write,
|
|
.valid.min_access_size = 1,
|
|
.valid.max_access_size = 4,
|
|
.impl.min_access_size = 2,
|
|
.impl.max_access_size = 2,
|
|
.endianness = DEVICE_LITTLE_ENDIAN,
|
|
};
|
|
|
|
static USBPortOps uhci_port_ops = {
|
|
.attach = uhci_attach,
|
|
.detach = uhci_detach,
|
|
.child_detach = uhci_child_detach,
|
|
.wakeup = uhci_wakeup,
|
|
.complete = uhci_async_complete,
|
|
};
|
|
|
|
static USBBusOps uhci_bus_ops = {
|
|
};
|
|
|
|
static int usb_uhci_common_initfn(PCIDevice *dev)
|
|
{
|
|
Error *err = NULL;
|
|
PCIDeviceClass *pc = PCI_DEVICE_GET_CLASS(dev);
|
|
UHCIPCIDeviceClass *u = container_of(pc, UHCIPCIDeviceClass, parent_class);
|
|
UHCIState *s = DO_UPCAST(UHCIState, dev, dev);
|
|
uint8_t *pci_conf = s->dev.config;
|
|
int i;
|
|
|
|
pci_conf[PCI_CLASS_PROG] = 0x00;
|
|
/* TODO: reset value should be 0. */
|
|
pci_conf[USB_SBRN] = USB_RELEASE_1; // release number
|
|
|
|
pci_config_set_interrupt_pin(pci_conf, u->info.irq_pin + 1);
|
|
|
|
if (s->masterbus) {
|
|
USBPort *ports[NB_PORTS];
|
|
for(i = 0; i < NB_PORTS; i++) {
|
|
ports[i] = &s->ports[i].port;
|
|
}
|
|
usb_register_companion(s->masterbus, ports, NB_PORTS,
|
|
s->firstport, s, &uhci_port_ops,
|
|
USB_SPEED_MASK_LOW | USB_SPEED_MASK_FULL,
|
|
&err);
|
|
if (err) {
|
|
error_report_err(err);
|
|
return -1;
|
|
}
|
|
} else {
|
|
usb_bus_new(&s->bus, sizeof(s->bus), &uhci_bus_ops, DEVICE(dev));
|
|
for (i = 0; i < NB_PORTS; i++) {
|
|
usb_register_port(&s->bus, &s->ports[i].port, s, i, &uhci_port_ops,
|
|
USB_SPEED_MASK_LOW | USB_SPEED_MASK_FULL);
|
|
}
|
|
}
|
|
s->bh = qemu_bh_new(uhci_bh, s);
|
|
s->frame_timer = timer_new_ns(QEMU_CLOCK_VIRTUAL, uhci_frame_timer, s);
|
|
s->num_ports_vmstate = NB_PORTS;
|
|
QTAILQ_INIT(&s->queues);
|
|
|
|
qemu_register_reset(uhci_reset, s);
|
|
|
|
memory_region_init_io(&s->io_bar, OBJECT(s), &uhci_ioport_ops, s,
|
|
"uhci", 0x20);
|
|
|
|
/* Use region 4 for consistency with real hardware. BSD guests seem
|
|
to rely on this. */
|
|
pci_register_bar(&s->dev, 4, PCI_BASE_ADDRESS_SPACE_IO, &s->io_bar);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int usb_uhci_vt82c686b_initfn(PCIDevice *dev)
|
|
{
|
|
UHCIState *s = DO_UPCAST(UHCIState, dev, dev);
|
|
uint8_t *pci_conf = s->dev.config;
|
|
|
|
/* USB misc control 1/2 */
|
|
pci_set_long(pci_conf + 0x40,0x00001000);
|
|
/* PM capability */
|
|
pci_set_long(pci_conf + 0x80,0x00020001);
|
|
/* USB legacy support */
|
|
pci_set_long(pci_conf + 0xc0,0x00002000);
|
|
|
|
return usb_uhci_common_initfn(dev);
|
|
}
|
|
|
|
static void usb_uhci_exit(PCIDevice *dev)
|
|
{
|
|
UHCIState *s = DO_UPCAST(UHCIState, dev, dev);
|
|
|
|
trace_usb_uhci_exit();
|
|
|
|
if (s->frame_timer) {
|
|
timer_del(s->frame_timer);
|
|
timer_free(s->frame_timer);
|
|
s->frame_timer = NULL;
|
|
}
|
|
|
|
if (s->bh) {
|
|
qemu_bh_delete(s->bh);
|
|
}
|
|
|
|
uhci_async_cancel_all(s);
|
|
|
|
if (!s->masterbus) {
|
|
usb_bus_release(&s->bus);
|
|
}
|
|
}
|
|
|
|
static Property uhci_properties_companion[] = {
|
|
DEFINE_PROP_STRING("masterbus", UHCIState, masterbus),
|
|
DEFINE_PROP_UINT32("firstport", UHCIState, firstport, 0),
|
|
DEFINE_PROP_UINT32("bandwidth", UHCIState, frame_bandwidth, 1280),
|
|
DEFINE_PROP_UINT32("maxframes", UHCIState, maxframes, 128),
|
|
DEFINE_PROP_END_OF_LIST(),
|
|
};
|
|
static Property uhci_properties_standalone[] = {
|
|
DEFINE_PROP_UINT32("bandwidth", UHCIState, frame_bandwidth, 1280),
|
|
DEFINE_PROP_UINT32("maxframes", UHCIState, maxframes, 128),
|
|
DEFINE_PROP_END_OF_LIST(),
|
|
};
|
|
|
|
static void uhci_class_init(ObjectClass *klass, void *data)
|
|
{
|
|
DeviceClass *dc = DEVICE_CLASS(klass);
|
|
PCIDeviceClass *k = PCI_DEVICE_CLASS(klass);
|
|
UHCIPCIDeviceClass *u = container_of(k, UHCIPCIDeviceClass, parent_class);
|
|
UHCIInfo *info = data;
|
|
|
|
k->init = info->initfn ? info->initfn : usb_uhci_common_initfn;
|
|
k->exit = info->unplug ? usb_uhci_exit : NULL;
|
|
k->vendor_id = info->vendor_id;
|
|
k->device_id = info->device_id;
|
|
k->revision = info->revision;
|
|
k->class_id = PCI_CLASS_SERIAL_USB;
|
|
dc->vmsd = &vmstate_uhci;
|
|
if (!info->unplug) {
|
|
/* uhci controllers in companion setups can't be hotplugged */
|
|
dc->hotpluggable = false;
|
|
dc->props = uhci_properties_companion;
|
|
} else {
|
|
dc->props = uhci_properties_standalone;
|
|
}
|
|
set_bit(DEVICE_CATEGORY_USB, dc->categories);
|
|
u->info = *info;
|
|
}
|
|
|
|
static UHCIInfo uhci_info[] = {
|
|
{
|
|
.name = "piix3-usb-uhci",
|
|
.vendor_id = PCI_VENDOR_ID_INTEL,
|
|
.device_id = PCI_DEVICE_ID_INTEL_82371SB_2,
|
|
.revision = 0x01,
|
|
.irq_pin = 3,
|
|
.unplug = true,
|
|
},{
|
|
.name = "piix4-usb-uhci",
|
|
.vendor_id = PCI_VENDOR_ID_INTEL,
|
|
.device_id = PCI_DEVICE_ID_INTEL_82371AB_2,
|
|
.revision = 0x01,
|
|
.irq_pin = 3,
|
|
.unplug = true,
|
|
},{
|
|
.name = "vt82c686b-usb-uhci",
|
|
.vendor_id = PCI_VENDOR_ID_VIA,
|
|
.device_id = PCI_DEVICE_ID_VIA_UHCI,
|
|
.revision = 0x01,
|
|
.irq_pin = 3,
|
|
.initfn = usb_uhci_vt82c686b_initfn,
|
|
.unplug = true,
|
|
},{
|
|
.name = "ich9-usb-uhci1", /* 00:1d.0 */
|
|
.vendor_id = PCI_VENDOR_ID_INTEL,
|
|
.device_id = PCI_DEVICE_ID_INTEL_82801I_UHCI1,
|
|
.revision = 0x03,
|
|
.irq_pin = 0,
|
|
.unplug = false,
|
|
},{
|
|
.name = "ich9-usb-uhci2", /* 00:1d.1 */
|
|
.vendor_id = PCI_VENDOR_ID_INTEL,
|
|
.device_id = PCI_DEVICE_ID_INTEL_82801I_UHCI2,
|
|
.revision = 0x03,
|
|
.irq_pin = 1,
|
|
.unplug = false,
|
|
},{
|
|
.name = "ich9-usb-uhci3", /* 00:1d.2 */
|
|
.vendor_id = PCI_VENDOR_ID_INTEL,
|
|
.device_id = PCI_DEVICE_ID_INTEL_82801I_UHCI3,
|
|
.revision = 0x03,
|
|
.irq_pin = 2,
|
|
.unplug = false,
|
|
},{
|
|
.name = "ich9-usb-uhci4", /* 00:1a.0 */
|
|
.vendor_id = PCI_VENDOR_ID_INTEL,
|
|
.device_id = PCI_DEVICE_ID_INTEL_82801I_UHCI4,
|
|
.revision = 0x03,
|
|
.irq_pin = 0,
|
|
.unplug = false,
|
|
},{
|
|
.name = "ich9-usb-uhci5", /* 00:1a.1 */
|
|
.vendor_id = PCI_VENDOR_ID_INTEL,
|
|
.device_id = PCI_DEVICE_ID_INTEL_82801I_UHCI5,
|
|
.revision = 0x03,
|
|
.irq_pin = 1,
|
|
.unplug = false,
|
|
},{
|
|
.name = "ich9-usb-uhci6", /* 00:1a.2 */
|
|
.vendor_id = PCI_VENDOR_ID_INTEL,
|
|
.device_id = PCI_DEVICE_ID_INTEL_82801I_UHCI6,
|
|
.revision = 0x03,
|
|
.irq_pin = 2,
|
|
.unplug = false,
|
|
}
|
|
};
|
|
|
|
static void uhci_register_types(void)
|
|
{
|
|
TypeInfo uhci_type_info = {
|
|
.parent = TYPE_PCI_DEVICE,
|
|
.instance_size = sizeof(UHCIState),
|
|
.class_size = sizeof(UHCIPCIDeviceClass),
|
|
.class_init = uhci_class_init,
|
|
};
|
|
int i;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(uhci_info); i++) {
|
|
uhci_type_info.name = uhci_info[i].name;
|
|
uhci_type_info.class_data = uhci_info + i;
|
|
type_register(&uhci_type_info);
|
|
}
|
|
}
|
|
|
|
type_init(uhci_register_types)
|