mirrors/qemu
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
2d710006a0
qemu/hw/arm
History
Peter Maydell 2d710006a0 hw/arm/virt: Default to not providing TrustZone support 
Switch the default for the 'virt' board to not providing TrustZone
support in either the CPU or the GIC. This is primarily for the
benefit of UEFI, which currently assumes there is no TrustZone
support, and does not set the GIC up correctly if it is TZ-aware.
It also means the board is consistent about its behaviour whether
we're using KVM or TCG (KVM never has TrustZone support).

If TrustZone support is required (for instance for running test
suites or TZ-aware firmware) it can be enabled with the
"-machine secure=on" command line option.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1441383782-24378-6-git-send-email-peter.maydell@linaro.org
2015-09-08 17:38:44 +01:00
..
allwinner-a10.c hw: Mark device misusing nd_table[] FIXME 2015-04-02 15:30:32 +02:00
armv7m.c target_arm: Parameterise the irq lines for armv7m_init 2015-02-05 13:37:21 +00:00
boot.c hw/arm: new interface for devices which need to behave differently for kernel boot 2015-09-08 17:38:43 +01:00
collie.c hw: Convert from BlockDriverState to BlockBackend, mostly 2014-10-20 14:02:25 +02:00
cubieboard.c arm: memory: Replace memory_region_init_ram with memory_region_allocate_system_memory 2015-04-08 17:30:36 +01:00
digic_boards.c arm: memory: Replace memory_region_init_ram with memory_region_allocate_system_memory 2015-04-08 17:30:36 +01:00
digic.c hw/arm/digic: add UART support 2013-12-17 20:12:51 +00:00
exynos4_boards.c machine: Conversion of QEMUMachineInitArgs to MachineState 2014-05-28 17:35:01 +02:00
exynos4210.c error: Use error_report_err() where appropriate 2015-02-18 10:51:09 +01:00
fsl-imx25.c i.MX: Add SOC support for i.MX25 2015-09-07 10:39:30 +01:00
fsl-imx31.c i.MX: Add i2C devices to i.MX31 SOC 2015-09-07 10:39:31 +01:00
gumstix.c hw: Convert from BlockDriverState to BlockBackend, mostly 2014-10-20 14:02:25 +02:00
highbank.c hw/arm/highbank.c: Wire FIQ between CPU <> GIC 2015-05-12 11:57:19 +01:00
imx25_pdk.c i.MX: Add the i.MX25 PDK platform 2015-09-07 10:39:31 +01:00
integratorcp.c arm: memory: Replace memory_region_init_ram with memory_region_allocate_system_memory 2015-04-08 17:30:36 +01:00
kzm.c i.MX: KZM: use standalone i.MX31 SOC support 2015-09-07 10:39:30 +01:00
mainstone.c hw: Convert from BlockDriverState to BlockBackend, mostly 2014-10-20 14:02:25 +02:00
Makefile.objs i.MX: Add the i.MX25 PDK platform 2015-09-07 10:39:31 +01:00
musicpal.c musicpal: Drop eth_can_receive 2015-07-20 17:47:24 +01:00
netduino2.c netduino2: Add the Netduino 2 Machine 2015-03-11 13:21:06 +00:00
nseries.c hw/arm/nseries.c: Fix misusing qemu_allocate_irqs for single irq 2015-06-03 14:21:24 +03:00
omap1.c arm: Use g_new() & friends where that makes obvious sense 2015-09-07 10:39:27 +01:00
omap2.c arm: Use g_new() & friends where that makes obvious sense 2015-09-07 10:39:27 +01:00
omap_sx1.c hw/arm/omap_sx1.c: Fix memory leak spotted by valgrind 2015-06-03 14:21:24 +03:00
palm.c memory: add parameter errp to memory_region_init_ram 2014-09-09 13:41:43 +02:00
pxa2xx_gpio.c Convert (ffs(val) - 1) to ctz32(val) 2015-04-28 15:36:08 +02:00
pxa2xx_pic.c hw/arm/pxa2xx: Mark coprocessor registers as ARM_CP_IO 2015-06-15 18:06:09 +01:00
pxa2xx.c arm: Use g_new() & friends where that makes obvious sense 2015-09-07 10:39:27 +01:00
realview.c error: Use error_report_err() where appropriate 2015-02-18 10:51:09 +01:00
spitz.c sysbus: Make devices picking up backends unavailable with -device 2015-04-02 15:30:44 +02:00
stellaris.c arm: Use g_new() & friends where that makes obvious sense 2015-09-07 10:39:27 +01:00
stm32f205_soc.c stm32f205: Add the stm32f205 SoC 2015-03-11 13:21:06 +00:00
strongarm.c arm: Use g_new() & friends where that makes obvious sense 2015-09-07 10:39:27 +01:00
strongarm.h hw: move private headers to hw/ subdirectories. 2013-04-08 18:13:16 +02:00
sysbus-fdt.c hw/arm/sysbus-fdt: enable vfio-calxeda-xgmac dynamic instantiation 2015-06-19 14:17:44 +01:00
tosa.c hw: Convert from BlockDriverState to BlockBackend, mostly 2014-10-20 14:02:25 +02:00
versatilepb.c arm: memory: Replace memory_region_init_ram with memory_region_allocate_system_memory 2015-04-08 17:30:36 +01:00
vexpress.c pflash_cfi01: change big-endian property to BIT type 2015-06-05 17:36:31 +02:00
virt-acpi-build.c hw/arm/virt: Add high MMIO PCI region, 512G in size 2015-09-07 10:39:29 +01:00
virt.c hw/arm/virt: Default to not providing TrustZone support 2015-09-08 17:38:44 +01:00
xilinx_zynq.c arm: memory: Replace memory_region_init_ram with memory_region_allocate_system_memory 2015-04-08 17:30:36 +01:00
xlnx-ep108.c arm: xlnx-zynqmp: Add boot-cpu property 2015-06-19 14:17:45 +01:00
xlnx-zynqmp.c xlnx-zynqmp: Connect the four OCM banks 2015-08-25 15:45:06 +01:00
z2.c hw: Convert from BlockDriverState to BlockBackend, mostly 2014-10-20 14:02:25 +02:00