mirrors/qemu
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
2b05705dc8
qemu/hw
History
Yuval Shaia 2b05705dc8 hw/pvrdma: Add support to allow guest to configure GID table 
The control over the RDMA device's GID table is done by updating the
device's Ethernet function addresses.
Usually the first GID entry is determined by the MAC address, the second
by the first IPv6 address and the third by the IPv4 address. Other
entries can be added by adding more IP addresses. The opposite is the
same, i.e. whenever an address is removed, the corresponding GID entry
is removed.

The process is done by the network and RDMA stacks. Whenever an address
is added the ib_core driver is notified and calls the device driver
add_gid function which in turn update the device.

To support this in pvrdma device we need to hook into the create_bind
and destroy_bind HW commands triggered by pvrdma driver in guest.
Whenever a change is made to the pvrdma port's GID table a special QMP
message is sent to be processed by libvirt to update the address of the
backend Ethernet device.

Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com>
Reviewed-by: Marcel Apfelbaum<marcel.apfelbaum@gmail.com>
Signed-off-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
2018-12-22 11:09:56 +02:00
..
9pfs 9p: remove support for the "handle" backend 2018-12-12 14:18:10 +01:00
acpi pci/pcihp: perform unplug via the hotplug handler 2018-12-20 11:19:12 -05:00
adc Include qapi/error.h exactly where needed 2018-02-09 13:50:17 +01:00
alpha hw/alpha/typhoon: Remove unuseful code 2018-10-24 06:44:59 -03:00
arm hw: acpi: Export and share the ARM RSDP build 2018-12-19 16:48:16 -05:00
audio audio/hda: fix guest triggerable assert 2018-11-27 07:47:57 +01:00
block miscellaneous patches: 2018-12-16 16:32:43 +00:00
bt hw/bt: Replace fprintf(stderr, "*\n" with error_report() 2018-01-22 09:51:00 +01:00
char qmp hmp: Make system_wakeup check wake-up support and run state 2018-12-18 07:55:47 +01:00
core q35: set split kernel irqchip as default 2018-12-20 13:25:11 -05:00
cpu hw/cpu/a15mpcore: If CPU has EL2, enable it on the GIC and wire it up 2018-08-24 13:17:34 +01:00
cris hw/cris: Use the IEC binary prefix definitions 2018-07-02 15:41:15 +02:00
display virtio: Helper for registering virtio device types 2018-12-19 16:48:16 -05:00
dma dma/puv3_dma: Convert sysbus init function to realize function 2018-12-13 13:47:58 +00:00
gpio gpio/puv3_gpio: Convert sysbus init function to realize function 2018-12-13 13:47:58 +00:00
hppa hw/hppa/dino: Remove unuseful code 2018-10-24 06:44:59 -03:00
hyperv hw/hyperv: fix NULL dereference with pure-kvm SynIC 2018-11-26 14:14:38 -02:00
i2c i2c: Move typedef of bitbang_i2c_interface to i2c.h 2018-12-12 10:01:13 +01:00
i386 x86-iommu: turn on IR by default if proper 2018-12-20 13:25:11 -05:00
ide replay: replay BH for IDE trim operation 2018-10-02 19:09:13 +02:00
input qmp hmp: Make system_wakeup check wake-up support and run state 2018-12-18 07:55:47 +01:00
intc spapr: add a 'reset' method to the sPAPR IRQ backend 2018-12-21 09:40:35 +11:00
ipack hw/ipack: Use the IEC binary prefix definitions 2018-07-02 15:41:12 +02:00
ipmi ipmi: Use proper struct reference for BT vmstate 2018-08-23 18:46:25 +02:00
isa configs: Add a CONFIG_SMC37C669 switch for the "smc37c669-superio" device 2018-10-24 07:33:44 +01:00
lm32 milkymist: Check for failure trying to load BIOS image 2018-11-06 11:32:14 +00:00
m68k hw/m68k: Use the IEC binary prefix definitions 2018-07-02 15:41:14 +02:00
mem memory-device: avoid overflows on very huge devices 2018-12-11 15:45:22 -02:00
microblaze hw/microblaze/xlnx-zynqmp-pmu: Fix introspection problem in 'xlnx, zynqmp-pmu-soc' 2018-07-23 15:21:25 +01:00
mips hw/mips/malta: Remove unuseful code 2018-10-24 06:44:59 -03:00
misc miscellaneous patches: 2018-12-16 16:32:43 +00:00
moxie change get_image_size return type to int64_t 2018-10-02 19:08:49 +02:00
net net: cadence_gem: Remove incorrect assert() 2018-11-26 13:41:42 +00:00
nios2 hw/nios2: Use the IEC binary prefix definitions 2018-07-02 15:41:15 +02:00
nvram nvram/ds1225y: Convert sysbus init function to realize function 2018-12-13 13:48:00 +00:00
openrisc Change references to serial_hds[] to serial_hd() 2018-04-26 13:57:00 +01:00
pci pci: Adjust PCI config limit based on bus topology 2018-12-20 11:25:36 -05:00
pci-bridge pci/shpc: perform unplug via the hotplug handler 2018-12-20 11:19:12 -05:00
pci-host ppc patch queue 2018-11-08 2018-11-08 14:42:37 +00:00
pcmcia hw: Clean up includes 2016-01-29 15:07:25 +00:00
ppc ppc patch queue 2018-12-21 2018-12-21 15:49:59 +00:00
rdma hw/pvrdma: Add support to allow guest to configure GID table 2018-12-22 11:09:56 +02:00
riscv hw/riscv/virt: Free the test device tree node name 2018-11-13 15:12:13 -08:00
s390x pci, pc, virtio: fixes, features 2018-12-21 14:06:01 +00:00
scsi vmstate: constify VMStateField 2018-11-27 15:35:15 +01:00
sd hw/sd/sdhci: Don't leak memory region in sdhci_sysbus_realize() 2018-12-14 13:30:54 +00:00
sh4 hw/sh4/sh_pci: Use DeviceState::realize rather than SysBusDevice::init 2018-10-24 06:44:59 -03:00
smbios hw/smbios: Move to the hw/firmware/ subdirectory 2018-12-19 16:48:16 -05:00
sparc Rename cpu_physical_memory_write_rom() to address_space_write_rom() 2018-12-14 13:30:48 +00:00
sparc64 hw/sparc64/niagara: Model the I/O Bridge with the 'unimplemented_device' 2018-10-24 06:44:59 -03:00
ssi hw/ssi/xilinx_spi: Use DeviceState::realize rather than SysBusDevice::init 2018-10-24 06:44:59 -03:00
timer qmp hmp: Make system_wakeup check wake-up support and run state 2018-12-18 07:55:47 +01:00
tpm tpm: Make sure the locality received from backend is valid 2018-12-04 10:21:25 -05:00
tricore hw/tricore: Use the IEC binary prefix definitions 2018-07-02 15:41:14 +02:00
unicore32 hw/input/i8042: Extract declarations from i386/pc.h into input/i8042.h 2018-03-12 16:12:48 +01:00
usb usb: fixes for mtp, ehci, usb-host and pvusb (xen). 2018-12-16 12:05:08 +00:00
vfio pci, pc, virtio: fixes, features 2018-12-21 14:06:01 +00:00
virtio virtio: Provide version-specific variants of virtio PCI devices 2018-12-19 16:48:16 -05:00
watchdog qapi: Drop qapi_event_send_FOO()'s Error ** argument 2018-08-28 18:21:38 +02:00
xen xen_backend: remove xen_sysdev_init() function 2018-12-13 13:48:02 +00:00
xenpv hw/xen: Use the IEC binary prefix definitions 2018-07-02 15:41:13 +02:00
xtensa target/xtensa: xtfpga: provide default memory sizes 2018-11-21 10:53:21 -08:00
Makefile.objs memory-device: introduce separate config option 2018-10-24 06:44:59 -03:00