qemu/tests/virtio-scsi-test.c

258 lines
7.8 KiB
C

/*
* QTest testcase for VirtIO SCSI
*
* Copyright (c) 2014 SUSE LINUX Products GmbH
* Copyright (c) 2015 Red Hat Inc.
*
* This work is licensed under the terms of the GNU GPL, version 2 or later.
* See the COPYING file in the top-level directory.
*/
#include "qemu/osdep.h"
#include "libqtest.h"
#include "block/scsi.h"
#include "libqos/libqos-pc.h"
#include "libqos/libqos-spapr.h"
#include "libqos/virtio.h"
#include "libqos/virtio-pci.h"
#include "standard-headers/linux/virtio_ids.h"
#include "standard-headers/linux/virtio_pci.h"
#include "standard-headers/linux/virtio_scsi.h"
#define PCI_SLOT 0x02
#define PCI_FN 0x00
#define QVIRTIO_SCSI_TIMEOUT_US (1 * 1000 * 1000)
#define MAX_NUM_QUEUES 64
typedef struct {
QVirtioDevice *dev;
QOSState *qs;
int num_queues;
QVirtQueue *vq[MAX_NUM_QUEUES + 2];
} QVirtIOSCSI;
static QOSState *qvirtio_scsi_start(const char *extra_opts)
{
const char *arch = qtest_get_arch();
const char *cmd = "-drive id=drv0,if=none,file=null-co://,format=raw "
"-device virtio-scsi-pci,id=vs0 "
"-device scsi-hd,bus=vs0.0,drive=drv0 %s";
if (strcmp(arch, "i386") == 0 || strcmp(arch, "x86_64") == 0) {
return qtest_pc_boot(cmd, extra_opts ? : "");
}
if (strcmp(arch, "ppc64") == 0) {
return qtest_spapr_boot(cmd, extra_opts ? : "");
}
g_printerr("virtio-scsi tests are only available on x86 or ppc64\n");
exit(EXIT_FAILURE);
}
static void qvirtio_scsi_stop(QOSState *qs)
{
qtest_shutdown(qs);
}
static void qvirtio_scsi_pci_free(QVirtIOSCSI *vs)
{
int i;
for (i = 0; i < vs->num_queues + 2; i++) {
qvirtqueue_cleanup(vs->dev->bus, vs->vq[i], vs->qs->alloc);
}
qvirtio_pci_device_disable(container_of(vs->dev, QVirtioPCIDevice, vdev));
qvirtio_pci_device_free((QVirtioPCIDevice *)vs->dev);
qvirtio_scsi_stop(vs->qs);
g_free(vs);
}
static uint64_t qvirtio_scsi_alloc(QVirtIOSCSI *vs, size_t alloc_size,
const void *data)
{
uint64_t addr;
addr = guest_alloc(vs->qs->alloc, alloc_size);
if (data) {
memwrite(addr, data, alloc_size);
}
return addr;
}
static uint8_t virtio_scsi_do_command(QVirtIOSCSI *vs, const uint8_t *cdb,
const uint8_t *data_in,
size_t data_in_len,
uint8_t *data_out, size_t data_out_len,
struct virtio_scsi_cmd_resp *resp_out)
{
QVirtQueue *vq;
struct virtio_scsi_cmd_req req = { { 0 } };
struct virtio_scsi_cmd_resp resp = { .response = 0xff, .status = 0xff };
uint64_t req_addr, resp_addr, data_in_addr = 0, data_out_addr = 0;
uint8_t response;
uint32_t free_head;
vq = vs->vq[2];
req.lun[0] = 1; /* Select LUN */
req.lun[1] = 1; /* Select target 1 */
memcpy(req.cdb, cdb, VIRTIO_SCSI_CDB_SIZE);
/* XXX: Fix endian if any multi-byte field in req/resp is used */
/* Add request header */
req_addr = qvirtio_scsi_alloc(vs, sizeof(req), &req);
free_head = qvirtqueue_add(vq, req_addr, sizeof(req), false, true);
if (data_out_len) {
data_out_addr = qvirtio_scsi_alloc(vs, data_out_len, data_out);
qvirtqueue_add(vq, data_out_addr, data_out_len, false, true);
}
/* Add response header */
resp_addr = qvirtio_scsi_alloc(vs, sizeof(resp), &resp);
qvirtqueue_add(vq, resp_addr, sizeof(resp), true, !!data_in_len);
if (data_in_len) {
data_in_addr = qvirtio_scsi_alloc(vs, data_in_len, data_in);
qvirtqueue_add(vq, data_in_addr, data_in_len, true, false);
}
qvirtqueue_kick(vs->dev, vq, free_head);
qvirtio_wait_used_elem(vs->dev, vq, free_head, QVIRTIO_SCSI_TIMEOUT_US);
response = readb(resp_addr +
offsetof(struct virtio_scsi_cmd_resp, response));
if (resp_out) {
memread(resp_addr, resp_out, sizeof(*resp_out));
}
guest_free(vs->qs->alloc, req_addr);
guest_free(vs->qs->alloc, resp_addr);
guest_free(vs->qs->alloc, data_in_addr);
guest_free(vs->qs->alloc, data_out_addr);
return response;
}
static QVirtIOSCSI *qvirtio_scsi_pci_init(int slot)
{
const uint8_t test_unit_ready_cdb[VIRTIO_SCSI_CDB_SIZE] = {};
QVirtIOSCSI *vs;
QVirtioPCIDevice *dev;
struct virtio_scsi_cmd_resp resp;
int i;
vs = g_new0(QVirtIOSCSI, 1);
vs->qs = qvirtio_scsi_start("-drive file=blkdebug::null-co://,"
"if=none,id=dr1,format=raw,file.align=4k "
"-device scsi-hd,drive=dr1,lun=0,scsi-id=1");
dev = qvirtio_pci_device_find(vs->qs->pcibus, VIRTIO_ID_SCSI);
vs->dev = (QVirtioDevice *)dev;
g_assert(dev != NULL);
g_assert_cmphex(vs->dev->device_type, ==, VIRTIO_ID_SCSI);
qvirtio_pci_device_enable(dev);
qvirtio_reset(vs->dev);
qvirtio_set_acknowledge(vs->dev);
qvirtio_set_driver(vs->dev);
vs->num_queues = qvirtio_config_readl(vs->dev, 0);
g_assert_cmpint(vs->num_queues, <, MAX_NUM_QUEUES);
for (i = 0; i < vs->num_queues + 2; i++) {
vs->vq[i] = qvirtqueue_setup(vs->dev, vs->qs->alloc, i);
}
/* Clear the POWER ON OCCURRED unit attention */
g_assert_cmpint(virtio_scsi_do_command(vs, test_unit_ready_cdb,
NULL, 0, NULL, 0, &resp),
==, 0);
g_assert_cmpint(resp.status, ==, CHECK_CONDITION);
g_assert_cmpint(resp.sense[0], ==, 0x70); /* Fixed format sense buffer */
g_assert_cmpint(resp.sense[2], ==, UNIT_ATTENTION);
g_assert_cmpint(resp.sense[12], ==, 0x29); /* POWER ON */
g_assert_cmpint(resp.sense[13], ==, 0x00);
return vs;
}
/* Tests only initialization so far. TODO: Replace with functional tests */
static void pci_nop(void)
{
QOSState *qs;
qs = qvirtio_scsi_start(NULL);
qvirtio_scsi_stop(qs);
}
static void hotplug(void)
{
QDict *response;
QOSState *qs;
qs = qvirtio_scsi_start(
"-drive id=drv1,if=none,file=null-co://,format=raw");
response = qmp("{\"execute\": \"device_add\","
" \"arguments\": {"
" \"driver\": \"scsi-hd\","
" \"id\": \"scsi-hd\","
" \"drive\": \"drv1\""
"}}");
g_assert(response);
g_assert(!qdict_haskey(response, "error"));
QDECREF(response);
response = qmp("{\"execute\": \"device_del\","
" \"arguments\": {"
" \"id\": \"scsi-hd\""
"}}");
g_assert(response);
g_assert(!qdict_haskey(response, "error"));
g_assert(qdict_haskey(response, "event"));
g_assert(!strcmp(qdict_get_str(response, "event"), "DEVICE_DELETED"));
QDECREF(response);
qvirtio_scsi_stop(qs);
}
/* Test WRITE SAME with the lba not aligned */
static void test_unaligned_write_same(void)
{
QVirtIOSCSI *vs;
uint8_t buf1[512] = { 0 };
uint8_t buf2[512] = { 1 };
const uint8_t write_same_cdb_1[VIRTIO_SCSI_CDB_SIZE] = {
0x41, 0x00, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x02, 0x00
};
const uint8_t write_same_cdb_2[VIRTIO_SCSI_CDB_SIZE] = {
0x41, 0x00, 0x00, 0x00, 0x00, 0x01, 0x00, 0x33, 0x00, 0x00
};
vs = qvirtio_scsi_pci_init(PCI_SLOT);
g_assert_cmphex(0, ==,
virtio_scsi_do_command(vs, write_same_cdb_1, NULL, 0, buf1, 512, NULL));
g_assert_cmphex(0, ==,
virtio_scsi_do_command(vs, write_same_cdb_2, NULL, 0, buf2, 512, NULL));
qvirtio_scsi_pci_free(vs);
}
int main(int argc, char **argv)
{
g_test_init(&argc, &argv, NULL);
qtest_add_func("/virtio/scsi/pci/nop", pci_nop);
qtest_add_func("/virtio/scsi/pci/hotplug", hotplug);
qtest_add_func("/virtio/scsi/pci/scsi-disk/unaligned-write-same",
test_unaligned_write_same);
return g_test_run();
}