mirrors/qemu
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
2113aed687
qemu/hw/m68k/q800.c
Mark Cave-Ayland 323f984908 mac_via: remove explicit viaN prefix from VIA IRQ gpios 
Now that q800 VIA1 and VIA2 are completely separate devices there is no need to
add a specific device prefix to ensure that the IRQ lines remain separate.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210830102447.10806-11-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-09-08 15:37:40 +02:00

528 lines
17 KiB
C
Raw Blame History

/*
* QEMU Motorla 680x0 Macintosh hardware System Emulator
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#include "qemu/osdep.h"
#include "qemu/units.h"
#include "qemu-common.h"
#include "qemu/datadir.h"
#include "sysemu/sysemu.h"
#include "cpu.h"
#include "hw/boards.h"
#include "hw/or-irq.h"
#include "elf.h"
#include "hw/loader.h"
#include "ui/console.h"
#include "hw/char/escc.h"
#include "hw/sysbus.h"
#include "hw/scsi/esp.h"
#include "standard-headers/asm-m68k/bootinfo.h"
#include "standard-headers/asm-m68k/bootinfo-mac.h"
#include "bootinfo.h"
#include "hw/misc/mac_via.h"
#include "hw/input/adb.h"
#include "hw/nubus/mac-nubus-bridge.h"
#include "hw/display/macfb.h"
#include "hw/block/swim.h"
#include "net/net.h"
#include "qapi/error.h"
#include "sysemu/qtest.h"
#include "sysemu/runstate.h"
#include "sysemu/reset.h"
#include "migration/vmstate.h"
#define MACROM_ADDR 0x40800000
#define MACROM_SIZE 0x00100000
#define MACROM_FILENAME "MacROM.bin"
#define IO_BASE 0x50000000
#define IO_SLICE 0x00040000
#define IO_SIZE 0x04000000
#define VIA_BASE (IO_BASE + 0x00000)
#define SONIC_PROM_BASE (IO_BASE + 0x08000)
#define SONIC_BASE (IO_BASE + 0x0a000)
#define SCC_BASE (IO_BASE + 0x0c020)
#define ESP_BASE (IO_BASE + 0x10000)
#define ESP_PDMA (IO_BASE + 0x10100)
#define ASC_BASE (IO_BASE + 0x14000)
#define SWIM_BASE (IO_BASE + 0x1E000)
#define NUBUS_SUPER_SLOT_BASE 0x60000000
#define NUBUS_SLOT_BASE 0xf0000000
#define SONIC_PROM_SIZE 0x1000
/*
* the video base, whereas it a Nubus address,
* is needed by the kernel to have early display and
* thus provided by the bootloader
*/
#define VIDEO_BASE 0xf9001000
#define MAC_CLOCK 3686418
/*
* The GLUE (General Logic Unit) is an Apple custom integrated circuit chip
* that performs a variety of functions (RAM management, clock generation, ...).
* The GLUE chip receives interrupt requests from various devices,
* assign priority to each, and asserts one or more interrupt line to the
* CPU.
*/
#define TYPE_GLUE "q800-glue"
OBJECT_DECLARE_SIMPLE_TYPE(GLUEState, GLUE)
struct GLUEState {
SysBusDevice parent_obj;
M68kCPU *cpu;
uint8_t ipr;
};
static void GLUE_set_irq(void *opaque, int irq, int level)
{
GLUEState *s = opaque;
int i;
if (level) {
s->ipr |= 1 << irq;
} else {
s->ipr &= ~(1 << irq);
}
for (i = 7; i >= 0; i--) {
if ((s->ipr >> i) & 1) {
m68k_set_irq_level(s->cpu, i + 1, i + 25);
return;
}
}
m68k_set_irq_level(s->cpu, 0, 0);
}
static void glue_reset(DeviceState *dev)
{
GLUEState *s = GLUE(dev);
s->ipr = 0;
}
static const VMStateDescription vmstate_glue = {
.name = "q800-glue",
.version_id = 0,
.minimum_version_id = 0,
.fields = (VMStateField[]) {
VMSTATE_UINT8(ipr, GLUEState),
VMSTATE_END_OF_LIST(),
},
};
/*
* If the m68k CPU implemented its inbound irq lines as GPIO lines
* rather than via the m68k_set_irq_level() function we would not need
* this cpu link property and could instead provide outbound IRQ lines
* that the board could wire up to the CPU.
*/
static Property glue_properties[] = {
DEFINE_PROP_LINK("cpu", GLUEState, cpu, TYPE_M68K_CPU, M68kCPU *),
DEFINE_PROP_END_OF_LIST(),
};
static void glue_init(Object *obj)
{
DeviceState *dev = DEVICE(obj);
qdev_init_gpio_in(dev, GLUE_set_irq, 8);
}
static void glue_class_init(ObjectClass *klass, void *data)
{
DeviceClass *dc = DEVICE_CLASS(klass);
dc->vmsd = &vmstate_glue;
dc->reset = glue_reset;
device_class_set_props(dc, glue_properties);
}
static const TypeInfo glue_info = {
.name = TYPE_GLUE,
.parent = TYPE_SYS_BUS_DEVICE,
.instance_size = sizeof(GLUEState),
.instance_init = glue_init,
.class_init = glue_class_init,
};
static void main_cpu_reset(void *opaque)
{
M68kCPU *cpu = opaque;
CPUState *cs = CPU(cpu);
cpu_reset(cs);
cpu->env.aregs[7] = ldl_phys(cs->as, 0);
cpu->env.pc = ldl_phys(cs->as, 4);
}
static uint8_t fake_mac_rom[] = {
0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
/* offset: 0xa - mac_reset */
/* via2[vDirB] |= VIA2B_vPower */
0x20, 0x7C, 0x50, 0xF0, 0x24, 0x00, /* moveal VIA2_BASE+vDirB,%a0 */
0x10, 0x10, /* moveb %a0@,%d0 */
0x00, 0x00, 0x00, 0x04, /* orib #4,%d0 */
0x10, 0x80, /* moveb %d0,%a0@ */
/* via2[vBufB] &= ~VIA2B_vPower */
0x20, 0x7C, 0x50, 0xF0, 0x20, 0x00, /* moveal VIA2_BASE+vBufB,%a0 */
0x10, 0x10, /* moveb %a0@,%d0 */
0x02, 0x00, 0xFF, 0xFB, /* andib #-5,%d0 */
0x10, 0x80, /* moveb %d0,%a0@ */
/* while (true) ; */
0x60, 0xFE /* bras [self] */
};
static void q800_init(MachineState *machine)
{
M68kCPU *cpu = NULL;
int linux_boot;
int32_t kernel_size;
uint64_t elf_entry;
char *filename;
int bios_size;
ram_addr_t initrd_base;
int32_t initrd_size;
MemoryRegion *rom;
MemoryRegion *io;
MemoryRegion *dp8393x_prom = g_new(MemoryRegion, 1);
uint8_t *prom;
const int io_slice_nb = (IO_SIZE / IO_SLICE) - 1;
int i, checksum;
ram_addr_t ram_size = machine->ram_size;
const char *kernel_filename = machine->kernel_filename;
const char *initrd_filename = machine->initrd_filename;
const char *kernel_cmdline = machine->kernel_cmdline;
const char *bios_name = machine->firmware ?: MACROM_FILENAME;
hwaddr parameters_base;
CPUState *cs;
DeviceState *dev;
DeviceState *via1_dev, *via2_dev;
DeviceState *escc_orgate;
SysBusESPState *sysbus_esp;
ESPState *esp;
SysBusDevice *sysbus;
BusState *adb_bus;
NubusBus *nubus;
DeviceState *glue;
DriveInfo *dinfo;
linux_boot = (kernel_filename != NULL);
if (ram_size > 1 * GiB) {
error_report("Too much memory for this machine: %" PRId64 " MiB, "
"maximum 1024 MiB", ram_size / MiB);
exit(1);
}
/* init CPUs */
cpu = M68K_CPU(cpu_create(machine->cpu_type));
qemu_register_reset(main_cpu_reset, cpu);
/* RAM */
memory_region_add_subregion(get_system_memory(), 0, machine->ram);
/*
* Memory from IO_BASE to IO_BASE + IO_SLICE is repeated
* from IO_BASE + IO_SLICE to IO_BASE + IO_SIZE
*/
io = g_new(MemoryRegion, io_slice_nb);
for (i = 0; i < io_slice_nb; i++) {
char *name = g_strdup_printf("mac_m68k.io[%d]", i + 1);
memory_region_init_alias(&io[i], NULL, name, get_system_memory(),
IO_BASE, IO_SLICE);
memory_region_add_subregion(get_system_memory(),
IO_BASE + (i + 1) * IO_SLICE, &io[i]);
g_free(name);
}
/* IRQ Glue */
glue = qdev_new(TYPE_GLUE);
object_property_set_link(OBJECT(glue), "cpu", OBJECT(cpu), &error_abort);
sysbus_realize_and_unref(SYS_BUS_DEVICE(glue), &error_fatal);
/* VIA 1 */
via1_dev = qdev_new(TYPE_MOS6522_Q800_VIA1);
dinfo = drive_get(IF_MTD, 0, 0);
if (dinfo) {
qdev_prop_set_drive(via1_dev, "drive", blk_by_legacy_dinfo(dinfo));
}
sysbus = SYS_BUS_DEVICE(via1_dev);
sysbus_realize_and_unref(sysbus, &error_fatal);
sysbus_mmio_map(sysbus, 1, VIA_BASE);
sysbus_connect_irq(sysbus, 0, qdev_get_gpio_in(glue, 0));
adb_bus = qdev_get_child_bus(via1_dev, "adb.0");
dev = qdev_new(TYPE_ADB_KEYBOARD);
qdev_realize_and_unref(dev, adb_bus, &error_fatal);
dev = qdev_new(TYPE_ADB_MOUSE);
qdev_realize_and_unref(dev, adb_bus, &error_fatal);
/* VIA 2 */
via2_dev = qdev_new(TYPE_MOS6522_Q800_VIA2);
sysbus = SYS_BUS_DEVICE(via2_dev);
sysbus_realize_and_unref(sysbus, &error_fatal);
sysbus_mmio_map(sysbus, 1, VIA_BASE + VIA_SIZE);
sysbus_connect_irq(sysbus, 0, qdev_get_gpio_in(glue, 1));
/* MACSONIC */
if (nb_nics > 1) {
error_report("q800 can only have one ethernet interface");
exit(1);
}
qemu_check_nic_model(&nd_table[0], "dp83932");
/*
* MacSonic driver needs an Apple MAC address
* Valid prefix are:
* 00:05:02 Apple
* 00:80:19 Dayna Communications, Inc.
* 00:A0:40 Apple
* 08:00:07 Apple
* (Q800 use the last one)
*/
nd_table[0].macaddr.a[0] = 0x08;
nd_table[0].macaddr.a[1] = 0x00;
nd_table[0].macaddr.a[2] = 0x07;
dev = qdev_new("dp8393x");
qdev_set_nic_properties(dev, &nd_table[0]);
qdev_prop_set_uint8(dev, "it_shift", 2);
qdev_prop_set_bit(dev, "big_endian", true);
object_property_set_link(OBJECT(dev), "dma_mr",
OBJECT(get_system_memory()), &error_abort);
sysbus = SYS_BUS_DEVICE(dev);
sysbus_realize_and_unref(sysbus, &error_fatal);
sysbus_mmio_map(sysbus, 0, SONIC_BASE);
sysbus_connect_irq(sysbus, 0, qdev_get_gpio_in(glue, 2));
memory_region_init_rom(dp8393x_prom, NULL, "dp8393x-q800.prom",
SONIC_PROM_SIZE, &error_fatal);
memory_region_add_subregion(get_system_memory(), SONIC_PROM_BASE,
dp8393x_prom);
/* Add MAC address with valid checksum to PROM */
prom = memory_region_get_ram_ptr(dp8393x_prom);
checksum = 0;
for (i = 0; i < 6; i++) {
prom[i] = revbit8(nd_table[0].macaddr.a[i]);
checksum ^= prom[i];
}
prom[7] = 0xff - checksum;
/* SCC */
dev = qdev_new(TYPE_ESCC);
qdev_prop_set_uint32(dev, "disabled", 0);
qdev_prop_set_uint32(dev, "frequency", MAC_CLOCK);
qdev_prop_set_uint32(dev, "it_shift", 1);
qdev_prop_set_bit(dev, "bit_swap", true);
qdev_prop_set_chr(dev, "chrA", serial_hd(0));
qdev_prop_set_chr(dev, "chrB", serial_hd(1));
qdev_prop_set_uint32(dev, "chnBtype", 0);
qdev_prop_set_uint32(dev, "chnAtype", 0);
sysbus = SYS_BUS_DEVICE(dev);
sysbus_realize_and_unref(sysbus, &error_fatal);
/* Logically OR both its IRQs together */
escc_orgate = DEVICE(object_new(TYPE_OR_IRQ));
object_property_set_int(OBJECT(escc_orgate), "num-lines", 2, &error_fatal);
qdev_realize_and_unref(escc_orgate, NULL, &error_fatal);
sysbus_connect_irq(sysbus, 0, qdev_get_gpio_in(escc_orgate, 0));
sysbus_connect_irq(sysbus, 1, qdev_get_gpio_in(escc_orgate, 1));
qdev_connect_gpio_out(DEVICE(escc_orgate), 0, qdev_get_gpio_in(glue, 3));
sysbus_mmio_map(sysbus, 0, SCC_BASE);
/* SCSI */
dev = qdev_new(TYPE_SYSBUS_ESP);
sysbus_esp = SYSBUS_ESP(dev);
esp = &sysbus_esp->esp;
esp->dma_memory_read = NULL;
esp->dma_memory_write = NULL;
esp->dma_opaque = NULL;
sysbus_esp->it_shift = 4;
esp->dma_enabled = 1;
sysbus = SYS_BUS_DEVICE(dev);
sysbus_realize_and_unref(sysbus, &error_fatal);
sysbus_connect_irq(sysbus, 0, qdev_get_gpio_in(via2_dev,
VIA2_IRQ_SCSI_BIT));
sysbus_connect_irq(sysbus, 1, qdev_get_gpio_in(via2_dev,
VIA2_IRQ_SCSI_DATA_BIT));
sysbus_mmio_map(sysbus, 0, ESP_BASE);
sysbus_mmio_map(sysbus, 1, ESP_PDMA);
scsi_bus_legacy_handle_cmdline(&esp->bus);
/* SWIM floppy controller */
dev = qdev_new(TYPE_SWIM);
sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), &error_fatal);
sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, SWIM_BASE);
/* NuBus */
dev = qdev_new(TYPE_MAC_NUBUS_BRIDGE);
sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), &error_fatal);
sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, NUBUS_SUPER_SLOT_BASE);
sysbus_mmio_map(SYS_BUS_DEVICE(dev), 1, NUBUS_SLOT_BASE);
nubus = MAC_NUBUS_BRIDGE(dev)->bus;
/* framebuffer in nubus slot #9 */
dev = qdev_new(TYPE_NUBUS_MACFB);
qdev_prop_set_uint32(dev, "width", graphic_width);
qdev_prop_set_uint32(dev, "height", graphic_height);
qdev_prop_set_uint8(dev, "depth", graphic_depth);
qdev_realize_and_unref(dev, BUS(nubus), &error_fatal);
cs = CPU(cpu);
if (linux_boot) {
uint64_t high;
kernel_size = load_elf(kernel_filename, NULL, NULL, NULL,
&elf_entry, NULL, &high, NULL, 1,
EM_68K, 0, 0);
if (kernel_size < 0) {
error_report("could not load kernel '%s'", kernel_filename);
exit(1);
}
stl_phys(cs->as, 4, elf_entry); /* reset initial PC */
parameters_base = (high + 1) & ~1;
BOOTINFO1(cs->as, parameters_base, BI_MACHTYPE, MACH_MAC);
BOOTINFO1(cs->as, parameters_base, BI_FPUTYPE, FPU_68040);
BOOTINFO1(cs->as, parameters_base, BI_MMUTYPE, MMU_68040);
BOOTINFO1(cs->as, parameters_base, BI_CPUTYPE, CPU_68040);
BOOTINFO1(cs->as, parameters_base, BI_MAC_CPUID, CPUB_68040);
BOOTINFO1(cs->as, parameters_base, BI_MAC_MODEL, MAC_MODEL_Q800);
BOOTINFO1(cs->as, parameters_base,
BI_MAC_MEMSIZE, ram_size >> 20); /* in MB */
BOOTINFO2(cs->as, parameters_base, BI_MEMCHUNK, 0, ram_size);
BOOTINFO1(cs->as, parameters_base, BI_MAC_VADDR, VIDEO_BASE);
BOOTINFO1(cs->as, parameters_base, BI_MAC_VDEPTH, graphic_depth);
BOOTINFO1(cs->as, parameters_base, BI_MAC_VDIM,
(graphic_height << 16) | graphic_width);
BOOTINFO1(cs->as, parameters_base, BI_MAC_VROW,
(graphic_width * graphic_depth + 7) / 8);
BOOTINFO1(cs->as, parameters_base, BI_MAC_SCCBASE, SCC_BASE);
rom = g_malloc(sizeof(*rom));
memory_region_init_ram_ptr(rom, NULL, "m68k_fake_mac.rom",
sizeof(fake_mac_rom), fake_mac_rom);
memory_region_set_readonly(rom, true);
memory_region_add_subregion(get_system_memory(), MACROM_ADDR, rom);
if (kernel_cmdline) {
BOOTINFOSTR(cs->as, parameters_base, BI_COMMAND_LINE,
kernel_cmdline);
}
/* load initrd */
if (initrd_filename) {
initrd_size = get_image_size(initrd_filename);
if (initrd_size < 0) {
error_report("could not load initial ram disk '%s'",
initrd_filename);
exit(1);
}
initrd_base = (ram_size - initrd_size) & TARGET_PAGE_MASK;
load_image_targphys(initrd_filename, initrd_base,
ram_size - initrd_base);
BOOTINFO2(cs->as, parameters_base, BI_RAMDISK, initrd_base,
initrd_size);
} else {
initrd_base = 0;
initrd_size = 0;
}
BOOTINFO0(cs->as, parameters_base, BI_LAST);
} else {
uint8_t *ptr;
/* allocate and load BIOS */
rom = g_malloc(sizeof(*rom));
memory_region_init_rom(rom, NULL, "m68k_mac.rom", MACROM_SIZE,
&error_abort);
filename = qemu_find_file(QEMU_FILE_TYPE_BIOS, bios_name);
memory_region_add_subregion(get_system_memory(), MACROM_ADDR, rom);
/* Load MacROM binary */
if (filename) {
bios_size = load_image_targphys(filename, MACROM_ADDR, MACROM_SIZE);
g_free(filename);
} else {
bios_size = -1;
}
/* Remove qtest_enabled() check once firmware files are in the tree */
if (!qtest_enabled()) {
if (bios_size < 0 || bios_size > MACROM_SIZE) {
error_report("could not load MacROM '%s'", bios_name);
exit(1);
}
ptr = rom_ptr(MACROM_ADDR, MACROM_SIZE);
stl_phys(cs->as, 0, ldl_p(ptr)); /* reset initial SP */
stl_phys(cs->as, 4,
MACROM_ADDR + ldl_p(ptr + 4)); /* reset initial PC */
}
}
}
static void q800_machine_class_init(ObjectClass *oc, void *data)
{
MachineClass *mc = MACHINE_CLASS(oc);
mc->desc = "Macintosh Quadra 800";
mc->init = q800_init;
mc->default_cpu_type = M68K_CPU_TYPE_NAME("m68040");
mc->max_cpus = 1;
mc->block_default_type = IF_SCSI;
mc->default_ram_id = "m68k_mac.ram";
}
static const TypeInfo q800_machine_typeinfo = {
.name = MACHINE_TYPE_NAME("q800"),
.parent = TYPE_MACHINE,
.class_init = q800_machine_class_init,
};
static void q800_machine_register_types(void)
{
type_register_static(&q800_machine_typeinfo);
type_register_static(&glue_info);
}
type_init(q800_machine_register_types)
Reference in New Issue View Git Blame Copy Permalink